وظائف محلل فني في العراق

<p><h4>Essential responsibilities:</h4> <p>Aerostat operators/user-level maintainers will participate in the overall, hands-on operation of the aerostat system including launch, in-flight, recovery, and moored activities.</p> <p>Candidates will perform all functions to operate the Persistent Ground Surveillance System (PGSS) and Persistent Threat Detection System (PTDS), an aerostat mounted Intelligence, Surveillance, and Reconnaissance (ISR) platform, its Mobile Mooring Platform (MMP), sensor payloads, communications and navigation systems, as well as associated support equipment including boom lift, forklift, all-terrain vehicles (ATVs), and electrical power generators.</p> <p>Additional responsibilities include performing analyses of system operations. Candidates must have:</p> <ul> <li>Knowledge of and experience in the operations of hardware systems and components.</li> <li>Experience in fault detection, isolation, and correction of hardware systems and individual components.</li> <li>Ability to perform routine system maintenance and analysis functions including hardware configurations; adding, removing, and replacing hardware components; use of hardware and software diagnostic testing tools; reading of electronic circuit schematics; and repairing printed circuit boards.</li> </ul> <p>Candidates will perform user-level maintenance functions including performing hands-on Preventative Maintenance Checks and Services (PMCS), troubleshooting, removing and replacing Line Replaceable Units (LRUs), and removing and replacing payloads.</p> <p>Candidates must possess a diverse range of skills with the ability to quickly adapt to new situations. Tasks will be performed under the direction of higher classified technicians and/or site personnel.</p> <h4>Minimum requirements:</h4> <ul> <li>High school diploma or equivalent is required.</li> <li>Two-year associate’s degree in a technical field from an accredited college can substitute for work experience.</li> <li>Must have an active Secret US Government clearance. US citizenship is required to obtain a Secret clearance.</li> <li>At least one year previous aerostat experience.</li> <li>Certified and school trained on 34M and 74K.</li> <li>Must have a valid U.S. passport with a minimum of one year remaining.</li> <li>Must have a valid US driver’s license.</li> <li>Knowledge of and experience in the operations of hardware systems and components.</li> <li>Experience in fault detection, isolation, and correction of hardware systems and individual components.</li> <li>Ability to perform routine system maintenance and analysis functions including hardware configurations; adding, removing, and replacing hardware components; use of hardware and software diagnostic testing tools; reading of electronic circuit schematics; and repairing printed circuit boards.</li> </ul> <h4>Physical requirements:</h4> <ul> <li>Requires the ability to regularly lift up to 50 lbs.</li> <li>Requires the ability to regularly climb extension ladders, roof ladders, stepladders, and stairs at least 10 times during shift.</li> <li>Requires the flexibility to bend/stoop and squat repetitively during shift.</li> <li>Requires the ability to regularly kneel repetitively during shift.</li> <li>Requires the ability to move in a 90-degree fashion on a repetitive basis during shift.</li> <li>Requires the ability to stretch/reach on a repetitive basis during shift.</li> <li>Requires the ability to walk extensively throughout the plant during shift.</li> <li>Requires the ability to interact with all clients in a professional and friendly manner despite periods of stress.</li> </ul> <h4>Medical requirements:</h4> <ul> <li>Successfully complete and pass the medical and dental examinations as required for deployment to Iraq.</li> <li>Must maintain physical and dental requirements for the duration of the deployment.</li> </ul> <h4>Working and living conditions:</h4> <p>This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to an extreme and austere desert-like environment. Temperatures can reach 120-130 degrees Fahrenheit (50-55 degrees Celsius) during the summer months.</p> <p>Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to CENTCOM, EUCOM, and AFRICOM for extended periods.</p> <p>Work schedules are a minimum of six days per week and ten hours per day, while some jobs have higher daily and weekly minimums.</p></p><p></p>

<p>Introduction Established in 1951, IOM is a Related Organization of the United Nations and the leading UN agency in the field of migration. Working closely with governmental, intergovernmental and non-governmental partners, IOM promotes humane and orderly migration for the benefit of all. It saves lives and protects people on the move, drives solutions to displacement, and facilitates pathways for regular migration, while providing services and advice to governments and migrants. IOM is committed to fostering a respectful, inclusive and supportive workplace where all employees can thrive professionally and feel valued. By creating such an environment, IOM aims to better harness the full potential of migration and strengthen its support to people on the move. IOM invites candidates from diverse backgrounds to apply and provides reasonable accommodation throughout the recruitment process when required. Learn more about IOM s workplace culture at IOM workplace culture | International Organization for Migration Applications are welcome from first- and second-tier candidates, particularly qualified female candidates as well as applications from the non-represented member countries of IOM. For all IOM vacancies, applications from qualified and eligible first-tier candidates are considered before those of qualified and eligible second-tier candidates in the selection process. For the purpose of this vacancy, the following are considered first-tier candidates: Internal candidates Candidates from the following IOM Member States that are not represented among staff members in the Professional and higher categories: Bahamas, Barbados, Comoros, Congo (the), Cook Islands, Dominica, Federated States of Micronesia, Grenada, Guinea-Bissau, Holy See, Iceland, Israel, Kiribati, Marshall Islands, Namibia, Nauru, Palau, Saint Kitts and Nevis, Saint Lucia, Samoa, Sao Tome and Principe, Seychelles, Solomon Islands, Suriname, Timor-Leste, Tonga, Trinidad and Tobago, Tuvalu, Vanuatu Second tier candidates include: All external candidates, except candidates from non-represented member states of IOM. Organizational Context and Scope Under the Peace, Recovery and Solutions Division (PRSD), IOM Iraq implements an integrated Rehabilitation, Reconciliation, and Reintegration (RRR) and durable solution approach to support internally displaced persons (IDPs) and returnees in achieving safe, dignified, and sustainable solutions. PRSD seeks to expand its durable solution, social cohesion and tribal engagement portfolio; case management; Information, Counseling and Referral Services (ICRS); and reconciliation, community-based dialogue, rehabilitation, and reintegration efforts, as well as Preventing Violent Extremism (PVE) and other related initiatives and activities. Through context-specific and individualized interventions, IOM aims to contribute to sustainable reintegration outcomes while consistently upholding the principles of do no harm and conflict sensitivity. Under the overall supervision of the Head, Peace, Recovery and Solutions Division (PRSD) and direct supervision of Programme Officer (Return and Reintegration), the Project Officer (Rehabilitation, Reconciliation, and Reintegration (RRR) Operations) will be responsible and accountable for planning, coordinating, implementing, and monitoring the activities of DS and RRR in Iraq in their area of responsibility. With regular travel to IOM project sites, they will play a critical role in liaison with local authorities and communities, mentoring IOM field staff, and monitoring project activities to recommend adjustments and course correction when needed.</p><p>Support the overall implementation of Durable Solution (DS) and Rehabilitation, Reconciliation, and Reintegration (RRR) initiatives and Projects, including the oversight of the financial, administrative and technical aspects, in line with IOM s policies and procedures, as well as donor requirements. Provide operational guidance, and technical supervision to DS and RRR staff across Iraq, assisting on programmatic planning and implementation. Monitor projects progress specifically aimed at increasing effectiveness and recommending appropriate action. Monitor the progress against the project s strategic objectives, benchmarks, and provide recommendations with respect to improvements and corrections; monitor the internal reporting tools in close coordination with Monitoring and Evaluation (M&amp;E) and Information Management (IM) team. Identify the priorities arose during the implementation of the Programme and contribute to the development of the new projects under the Programme and activities based on solid results framework and in response to emerging trends, priorities and analysing the local context in area of returns for new project proposals, as well as donor interests and requirements. Plan, develop, organize and deliver capacity building activities to build capacity of staff, partners, government officials, and other humanitarian actors. Coordinate the recruitment of staff and consultants in close coordination with Programme Officer (Return and Reintegration) and the Resource Management Unit. Train and mentor field staff and assist management to ensure that responsibilities are carried out according to do-no-harm principles. Monitor the compliance with project partners, project staff and implementing entities. Liaise with Government entities, Implementing Partners (IP), United Nations (UN) agencies and other stakeholders in the Project. Support building synergies within the different thematic teams within the DS and RRR portfolio and with other active programmes in Iraq, in order to synchronise all the activities carried out across different service areas. Pro-actively offer suggestions to program management regarding improvements in program operations and procedures and initiate such improvements as requested. Coordinate with other units and departments within IOM Iraq for a smooth implementation of all project activities. Contribute to adequate information management on project related activities including visibility by providing regular updates, summaries, press releases and other relevant materials, in coordination with Media Communications Unit (MCU) and relevant thematic team. Coordinate the development, dissemination and regular update of assessment and monitoring tools. Draft Standard Operating Procedures (SOPs) for Programme activities, if required. Produce quality progress Financial, Narrative, and other reports related to the Project activities. Support the elaboration and dissemination of reports in compliance with donor and IOM requirements. Undertake duty travel as required to monitor and support the implementation of different projects and activities under the portfolio. Perform such other duties as may be assigned.</p><p><strong>Desired Candidate Profile</strong></p><h2>Required Qualifications and Experience</h2><ul><li>Master's degree in Law, International Relations, Political or Social Sciences, International Development, International Relations, or a related field from an accredited academic institution with two years of relevant professional experience; or,</li><li>University degree in the above fields with four years of relevant professional experience.</li></ul><h2>Experience</h2><ul><li>Experience in programme management, implementation and project development;</li><li>Experience in coordination of various projects under the programme to ensure maximum outputs;</li><li>Experience in liaising with government authorities and other national/international institutions;</li><li>Experience in emergency settings with in-depth knowledge of IOM/UN programme/project life cycles;</li><li>Experience with UN and International Agencies, international or local Non-Governmental Organizations (NGOs) preferred; and,</li><li>Work experience in the Region is an advantage.</li></ul><h2>Skills</h2><ul><li>Knowledge of UN/IOM s regulations, policies and procedures;</li><li>Knowledge of project budgeting and financial management;</li><li>Knowledge and experience in working with PRIMA is an advantage;</li><li>Sound writing, communication and negotiation skills; and,</li><li>Excellent organization skills, analytical and creative thinking.</li></ul><h2>Languages</h2><ul><li>For this position, fluency in English is required (oral and written).</li><li>Working knowledge of another official UN language (Arabic, Chinese, French, Russian and Spanish) is an advantage.</li><li>Proficiency of language(s) required will be specifically evaluated during the selection process, which may include written and/or oral assessments.</li></ul><h2>Required Competencies</h2><ul><li>IOM s competency framework can be found at this link . Competencies will be assessed during the selection process.</li></ul><h2>Values</h2><ul><li><strong>Inclusion and respect for diversity</strong>: Respects and promotes individual and cultural differences. Encourages diversity and inclusion.</li><li><strong>Integrity and transparency</strong>: Maintains high ethical standards and acts in a manner consistent with organizational principles/rules and standards of conduct.</li><li><strong>Professionalism</strong>: Demonstrates ability to work in a composed, competent and committed manner and exercises careful judgment in meeting day-to-day challenges.</li><li><strong>Courage</strong>: Demonstrates willingness to take a stand on issues of importance.</li><li><strong>Empathy</strong>: Shows compassion for others, makes people feel safe, respected and fairly treated.</li></ul><h2>Core Competencies behavioural indicators Level 2</h2><ul><li><strong>Teamwork</strong>: Develops and promotes effective collaboration within and across units to achieve shared goals and optimize results.</li><li><strong>Delivering results</strong>: Produces and delivers quality results in a service-oriented and timely manner. Is action oriented and committed to achieving agreed outcomes.</li><li><strong>Managing and sharing knowledge</strong>: Continuously seeks to learn, share knowledge and innovate.</li><li><strong>Accountability</strong>: Takes ownership for achieving the Organization s priorities and assumes responsibility for own actions and delegated work.</li><li><strong>Communication</strong>: Encourages and contributes to clear and open communication. Explains complex matters in an informative, inspiring and motivational way.</li></ul><h2>Managerial Competencies behavioural indicators Level 2</h2><ul><li><strong>Leadership</strong>: Provides a clear sense of direction, leads by example and demonstrates the ability to carry out the Organization s vision. Assists others to realize and develop their leadership and professional potential.</li><li><strong>Empowering others</strong>: Creates an enabling environment where staff can contribute their best and develop their potential.</li><li><strong>Building Trust</strong>: Promotes shared values and creates an atmosphere of trust and honesty.</li><li><strong>Strategic thinking and vision</strong>: Works strategically to realize the Organization s goals and communicates a clear strategic direction.</li><li><strong>Humility</strong>: Leads with humility and shows openness to acknowledging own shortcomings.</li></ul>

<p>Introduction Established in 1951, IOM is a Related Organization of the United Nations and the leading UN agency in the field of migration. Working closely with governmental, intergovernmental and non-governmental partners, IOM promotes humane and orderly migration for the benefit of all. It saves lives and protects people on the move, drives solutions to displacement, and facilitates pathways for regular migration, while providing services and advice to governments and migrants. IOM is committed to fostering a respectful, inclusive and supportive workplace where all employees can thrive professionally and feel valued. By creating such an environment, IOM aims to better harness the full potential of migration and strengthen its support to people on the move. IOM invites candidates from diverse backgrounds to apply and provides reasonable accommodation throughout the recruitment process when required. Learn more about IOM s workplace culture at IOM workplace culture | International Organization for Migration Applications are welcome from internal and external candidates. For all IOM vacancies, applications from qualified and eligible first-tier candidates are considered before those of qualified and eligible second-tier candidates in the selection process. For the purpose of this vacancy, internal and internal-equivalent candidates are considered as first-tier candidates.</p><p>Organizational Context and Scope Under the Peace, Recovery and Solutions Division (PRSD), IOM Iraq implements an integrated Rehabilitation, Reconciliation, and Reintegration (RRR) Durable Solutions (DS) approach to support internally displaced persons (IDPs) and returnees in achieving safe, dignified, and sustainable solutions. The Durable Solutions Unit s work areas include policy and coordination, including oversight of IOM s leadership role in Iraq Durable Solutions coordination mechanisms; data including research and the Displacement Tracking Matrix (DTM); and operational activities such as housing and infrastructure reconstruction, livelihoods, cash for work and community engagement, in addition to direct support in facilitating voluntary returns for IDPs who have faced protracted displacement. Under the general guidance of the Chief of Mission for IOM in Iraq, the overall supervision of the Senior Programme Coordinator, and reporting directly to the Durable Solutions Programme Coordinator and in close collaboration with field officers in the governorates, the Senior Project Associate is responsible for supporting the implementation on the ground of activities related to durable solutions and reintegration, including monitoring progress, managing budgets, conducting analysis, reporting, stakeholder coordination, and capacity building, while documenting lessons learned and supporting staff supervision and project development.</p><p>Independently lead and coordinate the implementation of durable solutions and reintegration projects; monitor implementation of the activities to ensure work is proceeding according to established plans; analyse implementation difficulties and make recommendations for adjusting implementation modalities and work plans to best reflect changing environment on the field. Regularly research, follow-up, compile, analyse and present information/data on national, regional and international developments, reports, legislation and other relevant documentation, highlighting noteworthy issues for the consideration of appropriate parties. Monitor budget expenditures; verify availability of funds and maintain a proper record of approved project budgets and their revisions. Coordinate and monitor the financial, administrative and technical aspects of the project in line with IOM policies and donor requirements. Plan, coordinate and conduct capacity building workshops for relevant internal and external parties. Participate in meetings and conferences; maintain effective liaison and coordination with local authorities, partners, United Nation agencies, intergovernmental and non-governmental organizations, donors and other stakeholders relevant to the project. Coordinate the preparation of correspondence, briefing notes, presentations, narrative and financial reports; ensure status reports are prepared and submitted in a timely manner. Identify and document good practices and lessons learned; contribute to the development of Standard Operations Procedures (SOP), Terms of Reference (ToR), policies and concept papers and support the development of new projects. Supervise and provide guidance and training to reporting staff. Perform other related duties as assigned.</p><p><strong>Desired Candidate Profile</strong></p><b>Required Qualifications and Experience</b><br>Education Bachelor's degree in Political or Social Sciences, International Relations, Development Studies, Migration Studies, Human Rights, Law or related fields from an accredited academic institution with five years of relevant professional experience. Completed High School degree from accredited academic institution with seven years relevant professional experience. Accredited Universities are those listed in the UNESCO World Higher Education Database.<br>Experience Experience in liaising with governmental authorities, national/international institutions, United Nations agencies and non-governmental organizations; Experience in working with migrants, refugees, internally displaced persons, victims of trafficking and other vulnerable groups; and, Prior work experience with international humanitarian organizations, non-government or government institutions/organization in a multi-cultural setting is an advantage. Proven experience in design and implementation of assessments, field-based research and analysis, protection and reintegration monitoring, programmatic impact monitoring, and/or other MEAL assessments. Proven experience in development of data collection tools, databases, dashboards, supervision of data collection exercises and capacity building for data collection. Experience in report drafting and design, including data visualization and presentation. Knowledge and experience of Durable Solutions and Reintegration programming is desirable. Familiarity with and/or experience in Iraq or in other internal displacement contexts in the Middle East is an asset. Familiarity with and/or experience in post-conflict environments is an asset.<br>Skills Substantial knowledge of non-profit work including data collection and data analysis in post-conflict settings. Knowledge of Durable Solutions Principles, international standards and Frameworks, Guiding Principles on Internal Displacement. Technical understanding of core protection concepts, prevention, and response strategies. Proven experience of research and assessments on displacement and durable solutions and ability to summarize and explain complex information to other. Excellent analytical, proficiency with computers, especially MS Office and analytics software, mastery of certain programming languages may be required writing and presentation skills. Ability to recognize patterns and trends in large data sets and use numerical information to develop business strategies. Excellent communication, writing, and presentation skills.<br>Languages All IOM staff members in all categories are required to be fluent in one of the IOM's official languages (English, French, Spanish). Fluency in English is required Arabic and Kurdish are advantage Languages Proficiency of language(s) required will be specifically evaluated during the selection process, which may include written and/or oral assessments.<br>Required Competencies IOM s competency framework can be found at this link . Competencies will be assessed during the selection process.<br>Values - all IOM staff members must abide by and demonstrate these five values:<br>Inclusion and respect for diversity : Respects and promotes individual and cultural differences. Encourages diversity and inclusion.<br>Integrity and transparency : Maintains high ethical standards and acts in a manner consistent with organizational principles/rules and standards of conduct.<br>Professionalism : Demonstrates ability to work in a composed, competent and committed manner and exercises careful judgment in meeting day-to-day challenges.<br>Courage : Demonstrates willingness to take a stand on issues of importance.<br>Empathy : Shows compassion for others, makes people feel safe, respected and fairly treated.<br>Core Competencies behavioural indicators Level 2<br>Teamwork : Develops and promotes effective collaboration within and across units to achieve shared goals and optimize results.<br>Delivering results : Produces and delivers quality results in a service-oriented and timely manner. Is action oriented and committed to achieving agreed outcomes.<br>Managing and sharing knowledge : Continuously seeks to learn, share knowledge and innovate.<br>Accountability : Takes ownership for achieving the Organization s priorities and assumes responsibility for own actions and delegated work.<br>Communication : Encourages and contributes to clear and open communication. Explains complex matters in an informative, inspiring and motivational way.<br>Managerial Competencies behavioural indicators Level 2, if with direct reports<br>Leadership : Provides a clear sense of direction, leads by example and demonstrates the ability to carry out the Organization s vision. Assists others to realize and develop their leadership and professional potential.<br>Empowering others : Creates an enabling environment where staff can contribute their best and develop their potential.<br>Building Trust : Promotes shared values and creates an atmosphere of trust and honesty.<br>Strategic thinking and vision : Works strategically to realize the Organization s goals and communicates a clear strategic direction.<br>Humility : Leads with humility and shows openness to acknowledging own shortcomings.<br>Notes Please refer to this link for guidance on IOM Job Category. Any offer made to the candidate in relation to this vacancy notice is subject to funding confirmation. This selection process may be used to staff similar positions in various duty stations. Recommended candidates will remain eligible to be appointed in a similar position for a period of 24 months. Appointment will be subject to certification that the candidate is medically fit for appointment, accreditation, any residency or visa requirements, security clearances. IOM has a zero-tolerance policy on conduct that is incompatible with the aims and objectives of the United Nations and IOM, including sexual exploitation and abuse, sexual harassment, abuse of authority and discrimination based on gender, nationality, age, race, sexual orientation, religious or ethnic background or disabilities. IOM does not charge a fee at any stage of its recruitment process (application, interview, processing, training or other fee). IOM does not request any information related to bank accounts. IOM only accepts duly completed applications submitted through the IOM e-Recruitment system (for internal candidates link here ). The online tool also allows candidates to track the status of their application. No late applications will be accepted. Only shortlisted candidates will be contacted. For further information and other job postings, you are welcome to visit our website: IOM Careers and Job Vacancies

<p><h4>About company</h4> <p>Belong, connect, grow, with KBR!<br> The KBR team delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.<br> KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Job purpose</h4> <p>This position is to assist in administration duties to the HSSE Manager and Field HSE Manager regarding record keeping, finances, timekeeping, contractual obligations, HR requirements, material, stores and equipment administration.</p> <h4>Duties and responsibilities</h4> <ul> <li>Assistance in financial record keeping for the HSE department.</li> <li>Facilitate and record keeping of all BOC correspondence letters and reports.</li> <li>Creating and upkeep of HSE tools, equipment and PPE issuing databases.</li> <li>Creating and upkeep of equipment orders databases.</li> <li>Assistance in time sheet collections and submissions.</li> <li>Record keeping of all contractual meeting agreements and minutes.</li> <li>Creating and upkeep of HR employee requirement.</li> <li>Control and coordination of HSE team calendars and rosters.</li> <li>Record keeping of all HSE team accommodation requirements and accommodation lists.</li> <li>Upkeep of the HSE incentive gifts inventory and issuing lists.</li> <li>Record keeping and booking of visa application and expiry dates and flight departure dates.</li> <li>Facilitate and record keeping of all service desk, IT and other departmental requests.</li> <li>Any other tasks related to HSE in general.</li> </ul> <h4>Qualification & training requirements</h4> <p>Diploma / Degree in business management administration or equivalent.<br> Working knowledge of HSE related activities.</p> <h4>Experience</h4> <p>1 years’ experience in procurements, logistics, finance and administration.</p> <h4>Language proficiency, computer and software skills</h4> <p>MS Office: Proficient at an advanced level.<br> English – upper intermediate (verbal & written).</p> <h4>Skills</h4> <ul> <li>Strong communication and presentation skills.</li> <li>Good knowledge of Office applications.</li> <li>Oil and gas and HSE experience is preferable.</li> <li>Good team working skills.</li> <li>Ability to focus on continuous self-learning and improvement.</li> <li>Ability to work cohesively and communicate successfully in multi-cultural teams whilst being aware of and sensitive to cultural differences.</li> <li>Ability to communicate, co-ordinate, and manage cost data flow interfaces with each function.</li> <li>Skilled preparing meaningful accurate reports, in clear and concise English, utilizing information and data received from third parties, SAP (or equivalent system) and own analyses.</li> </ul></p><p></p>

<p><h4>About company</h4> <p>Belong, connect, grow, with KBR!<br> The KBR team delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.<br> KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Job purpose</h4> <p>This position is to assist in administration duties to the HSSE Manager and Field HSE Manager regarding record keeping, finances, timekeeping, contractual obligations, HR requirements, material, stores and equipment administration.</p> <h4>Duties and responsibilities</h4> <ul> <li>Assistance in financial record keeping for the HSE department.</li> <li>Facilitate and record keeping of all BOC correspondence letters and reports.</li> <li>Creating and upkeep of HSE tools, equipment and PPE issuing databases.</li> <li>Creating and upkeep of equipment orders databases.</li> <li>Assistance in time sheet collections and submissions.</li> <li>Record keeping of all contractual meeting agreements and minutes.</li> <li>Creating and upkeep of HR employee requirement.</li> <li>Control and coordination of HSE team calendars and rosters.</li> <li>Record keeping of all HSE team accommodation requirements and accommodation lists.</li> <li>Upkeep of the HSE incentive gifts inventory and issuing lists.</li> <li>Record keeping and booking of visa application and expiry dates and flight departure dates.</li> <li>Facilitate and record keeping of all service desk, IT and other departmental requests.</li> <li>Any other tasks related to HSE in general.</li> </ul> <h4>Qualification & training requirements</h4> <p>Diploma / Degree in business management administration or equivalent.<br> Working knowledge of HSE related activities.</p> <h4>Experience</h4> <p>1 years’ experience in procurements, logistics, finance and administration.</p> <h4>Language proficiency, computer and software skills</h4> <p>MS Office: Proficient at an advanced level.<br> English – upper intermediate (verbal & written).</p> <h4>Skills</h4> <ul> <li>Strong communication and presentation skills.</li> <li>Good knowledge of Office applications.</li> <li>Oil and gas and HSE experience is preferable.</li> <li>Good team working skills.</li> <li>Ability to focus on continuous self-learning and improvement.</li> <li>Ability to work cohesively and communicate successfully in multi-cultural teams whilst being aware of and sensitive to cultural differences.</li> <li>Ability to communicate, co-ordinate, and manage cost data flow interfaces with each function.</li> <li>Skilled preparing meaningful accurate reports, in clear and concise English, utilizing information and data received from third parties, SAP (or equivalent system) and own analyses.</li> </ul></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span> <span></span></span><p>We are looking for the right people — people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world’s largest providers of products and services to the global energy industry.</p><br><b>Job Duties</b> <br><ul> <li>Under broad direction from the Senior Geology Advisor and the Integrated Asset Management (IAM) senior management and with support from engineering and operations staff across all Halliburton product service lines (PSLs), the Geology Advisor works within a senior, multi- discipline petrotechnical team to develop and apply advanced interpretation techniques in support of the evaluation and development of potentially large, challenging oil and gas field development projects for potential investment by IAM.</li> <li>The Geology Advisor will support prospect evaluation work by providing validation of preexisting interpretations as well as creating new interpretations (e.g., structure maps, isopach maps, cross sections, annotated bubble maps, etc.).&nbsp;</li> <li>Role includes data analysis, mapping and modeling and identification of prospective basins, plays or trends.</li> <li>Additional responsibilities for this role include supporting IAM senior management in defining standardized, best practice processes to support the systematic yet efficient and effective evaluation, well engineering, and field development planning work required as part of the project development process. As part of the IAM formal evaluation process, incumbents will participate in formal brainstorming workshops with other key Halliburton technical resources in an environment that promotes innovation and input from all participants.&nbsp;</li> </ul><br><br><b>Qualifications</b> <br><p>Requires an undergraduate degree in geology or geosciences and a minimum of 10 years of experience in production and new venture geology, which includes experience in an oil and gas operator.</p><br><br><br><br><p><strong>Halliburton is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation</strong>.</p><br> <p><strong><u>Location</u></strong></p><br> <p>Oils Opertion ST,N°29 Burjesia,&nbsp;Basra,&nbsp;Basrah,&nbsp;61001, Iraq</p><br> <p><strong><u>Job Details</u></strong></p><br> <p><strong>Requisition Number:</strong>&nbsp;210435&nbsp;&nbsp;<br><strong>Experience Level:&nbsp;</strong>Experienced Hire&nbsp;<br><strong>Job Family:</strong>&nbsp;Engineering/Science/Technology&nbsp;<br><strong>Product Service Line:&nbsp;</strong>Halliburton Project Management&nbsp;&nbsp;&nbsp;<br><strong>Full Time / Part Time:&nbsp;</strong>Full Time</p><br> <p><strong>Additional Locations for this position:&nbsp;</strong></p><br> <p><u><strong>Compensation Information</strong></u><br>Compensation is competitive and commensurate with experience.</p><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> We are supporting a leading international Oil &amp; Gas operator in Basra to hire an experienced Contracts Administrator.<br>This is a unique opportunity to contribute to a long-term, high-impact project, working alongside global experts on one of the region’s most strategic energy developments.<br>With over 1500 workers supporting our clients in Iraq, NES has deep insight into their culture and hiring expectations - allowing us to support candidates effectively throughout the hiring process.<br> Job Description<br><ul><li>Monitoring contract performance, including key milestones &amp; deliverables, escalating risks/concerns in a timely manner to prevent value leakage.</li><li>Provide input and assist Project Managers (PMs) and PSCM in preparing tenders, contract amendments, responses to formal communication etc.</li><li>Review invoices for contractual compliance.</li><li>Maintain audit-ready documentation and contract info.</li><li>Review contract related correspondence and prepare responses in collaboration with key stakeholders.</li><li>Review and process contract variation orders.</li><li>Prepare contracts and associated amendments as required.</li><li>Set up and maintain relevant registers and management reports/status updates.</li><li>Assist with dispute resolution and claims management and negotiation.</li><li>Verbal and written communication in English is mandatory</li></ul><br>Qulification&nbsp;<br><ul><li>5 years’ experience in an Oil &amp; Gas contracting environment.</li><li>Contracts experience both pre and post award is advantageous.</li><li>Excellent communication skills and attention to detail whilst operating in a fast-paced environment.</li></ul><br> Why This Opportunity Stands Out<br>• Long-term project stability (many contractors exceed 10 years)<br>• Exposure to a major global operator<br>• Opportunity to work alongside industry-leading professionals<br>Why Apply Through NES?<br>NES is the world’s leading engineering staffing provider, operating across Oil &amp; Gas, Power, Life Sciences, and infrastructure sectors.<br>80+ offices across 45 countries<br>24,000+ contractors globally and 10,000+ in the Middle East<br>Strong regional presence and long-term client partnerships <br> <br>With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil &amp; Gas, Power &amp; Renewables, Chemicals, Construction &amp; Infrastructure, Life Sciences, Mining and&nbsp;Manufacturing&nbsp;sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients. <br><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Mechanical Engineer will be based on-site in Basra, Iraq, and will be responsible for supervising and executing mechanical installation works for static and rotary equipment within an EPC oil &amp; gas construction project. The role ensures that all installation activities are performed safely, in compliance with project specifications, approved drawings, international standards, and HSE requirements.</p><p><br></p><p>The Mechanical Engineer will coordinate closely with construction, QA/QC, piping, commissioning teams, and subcontractors to ensure proper installation, alignment, testing, and timely project delivery while maintaining quality and safety standards throughout the project lifecycle.</p><p><br></p><ul><li><p>Supervise installation of static equipment including pressure vessels, heat exchangers, columns, tanks, separators, and other process equipment in accordance with approved drawings and specifications.</p></li><li><p>Oversee installation, alignment, and grouting of rotary equipment including pumps, compressors, blowers, and package units as per manufacturer requirements and project standards.</p></li><li><p>Monitor piping installation works including supports, fit-up, routing, and hydrotest preparation to ensure compliance with approved isometrics and piping layouts.</p></li><li><p>Verify equipment foundation preparation, anchor bolt positioning, and base plate leveling prior to equipment erection.</p></li><li><p>Ensure proper execution of cold and hot alignment, shaft alignment, and pre-commissioning mechanical checks for rotating equipment.</p></li><li><p>Review mechanical drawings such as GA drawings, P&amp;IDs, isometrics, vendor drawings, and method statements to ensure correct site implementation.</p></li><li><p>Coordinate with QA/QC for inspections, material verification, NDT requirements, hydrostatic testing, and mechanical completion documentation.</p></li><li><p>Interface with other disciplines including E&amp;I and civil teams to ensure proper coordination of mechanical installations.</p></li><li><p>Ensure compliance with international standards such as ASME, API, and project technical specifications.</p></li><li><p>Support pre-commissioning and commissioning activities including flushing, leak testing, mechanical run tests, and system handover to operations.</p></li><li><p>Participate in daily progress meetings, monitor subcontractor performance, and report progress to the Construction Manager.</p></li><li><p>Ensure strict adherence to HSE regulations, conduct risk assessments, and ensure safe mechanical lifting, rigging, and installation activities on site.</p><p><br></p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor's degree in Mechanical Engineering or a related field.</p></li><li><p>Good knowledge in mechanical engineering principles, particularly in the oil and gas sector.</p></li><li><p>Knowledge of the design and process of oil and gas plants</p></li><li><p>Understanding of maintenance and troubleshooting techniques of equipment involved in field services and EPC operations.</p></li><li><p>Strong analytical and problem-solving skills.</p></li><li><p>Effective communication and teamwork abilities.</p></li><li><p>Ability to learn quickly and adapt to new tools and technologies.</p></li><li><p>Familiarity with industry standards and safety regulations is an advantage.</p></li><li><p>7-10 years experience in static, rotary equipment installation.</p></li><li><p>Knowledge of piping and general mechanical works.</p></li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Scaffolding Specialist<br><br><p><b>Company: KBR<br>Project: ROO Project, Iraq<br>Location: Basra, Iraq – On-site<br>Rotation: 28/28 days</b></p><br><br><p><b>About Company</b></p><br><br><p><i>"Belong, Connect, Grow, with KBR!</i></p><br><br><br><p><i>The KBR team delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</i></p><br><br><br><p><i>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets."</i></p><br><br><br><p><b>Job Purpose</b></p><br><br><p>The Scaffolding Specialist is responsible for the safe planning, erection, inspection, maintenance, and dismantling of scaffolding systems to support ROO Integrated Projects activities under EPCm Contract . This role ensures compliance with applicable with International and ROO standards, specifications, and safety regulations while optimizing scaffold efficiency and project schedules within an engineering, procurement, and construction framework.</p><br><br><br><p><b>Job Responsibilities</b></p><br><br><ul><li><b>Plan and supervise scaffold activities</b>:&nbsp;Assess engineering drawings and method statements to determine scaffold type, layout, loads, and access requirements; develop task plans and risk assessments.</li><li><b>Erection &amp; dismantling</b>:&nbsp;Lead on-site erection, alteration, and dismantling of scaffolding structures in accordance with applicable standards and project procedures.</li><li><b>Inspection &amp; quality control</b>:&nbsp;Conduct routine inspections for stability, safety, and compliance; ensure tagging (e.g., safe/unsafe), maintenance, and corrective actions are documented.</li><li><b>Safety &amp; compliance</b>:&nbsp;Enforce site safety rules, use of PPE, and permit-to-work processes; coordinate with HSE for incident reporting and near-miss investigations.</li><li><b>Material management</b>:&nbsp;Manage scaffolding materials, accessories, and consumables; ensure traceability, storage, and return of equipment.</li><li><b>Coordination &amp; communication</b>:&nbsp;Liaise with construction supervisors, engineers, and subcontractors to align scaffold activities with project milestones and work plans within Brown Field Projects environment.</li><li><b>Problem solving</b>:&nbsp;Identify and resolve technical issues related to scaffold design, load limits, or access constraints; recommend temporary works when necessary.</li><li><b>Documentation</b>:&nbsp;Maintain accurate records including daily logs, inspection reports, load calculations, drawings (as-builts), and compliance certifications.</li><li><b>Training &amp; mentorship</b> Provide on-site coaching to scaffold teams, ensuring proper techniques and safety practices are understood and followed. Contribute to the development of local workforce capabilities by identifying training needs and delivering hands-on guidance. Support ROO’s long-term localization strategy by fostering knowledge transfer, promoting sustainable skill development, and preparing local personnel for future leadership roles within scaffolding operations..</li><li><b>Continuous improvement</b>:&nbsp;Propose and implement process improvements to enhance safety, efficiency, and cost-effectiveness.</li></ul><br><p><b>Technical Skills </b></p><br><br><ul><li><b>Scaffold Systems Knowledge</b>:&nbsp;Experience with common systems (e.g., tube-and-couple, cuplock, frame/scaffold boards) and associated components; ability to tailor solutions to Support ROO project requirements.</li><li><b>Engineering &amp; Load Calculations</b>:&nbsp;Interpret engineering drawings and perform basic structural load assessments and stability checks; competence in applying temporary works principles within ROO M&amp;E Projects framework.</li><li><b>Standards &amp; Codes</b>:&nbsp;Familiarity with international and regional scaffolding standards (e.g., OSHA/EN/ISO equivalents) and client-specific procedures; awareness of project-specific QA/QC requirements.</li><li><b>Inspection &amp; Testing</b>:&nbsp;Proficiency in scaffold inspections, tagging, acceptance criteria, and non-destructive testing basics as applicable to scaffolding of ROO M&amp;E Projects.</li><li><b>Tools &amp; Equipment</b>:&nbsp;Proficiency with rigging gear, restraint systems, access towers, and fall protection equipment; ability to select appropriate equipment for complex job sites.</li><li><b>Quality &amp; Documentation</b>:&nbsp;Strong documentation skills, including daily logs, checklists, load calculations, drawings (as-builts), and compliance certifications; use of document control practices.</li><li><b>Software (optional):</b>&nbsp;Basic proficiency in drawing review tools, BIM coordination concepts, or project management software as used on site.</li></ul><br><p><b>Soft Skills</b></p><br><br><ul><li><b>Leadership &amp; Team Management</b>:&nbsp;Lead a diverse crew, delegate tasks, and maintain morale on demanding sites.</li><li><b>Communication</b>:&nbsp;Clear, concise communication with supervisors, engineers, and field personnel; effective reporting and escalation when needed.</li><li><b>Problem-Solving</b>:&nbsp;Proactive in identifying risks and proposing practical mitigations.</li><li><b>Safety-First Mindset</b>:&nbsp;Demonstrated commitment to safety culture and incident prevention.</li><li><b>Adaptability</b>:&nbsp;Flexibility to work in changing conditions, weather, and project needs.</li><li><b>Attention to Detail:</b>&nbsp;Meticulous in planning, inspections, and documentation.</li><li><b>Time Management</b>:&nbsp;Prioritization and organization to meet tight construction schedules.</li></ul><br><p><b>Experience &amp; Qualifications</b></p><br><br><ul><li><b>Experience</b>:&nbsp;Minimum of&nbsp;12 years&nbsp;of relevant experience in scaffolding on large oil &amp; gas, heavy industrial, or construction projects.</li><li><b>Education</b>:&nbsp;Bachelor’s Degree in Engineering&nbsp;or a related field.</li><li><b>Licenses/Certifications (preferred):</b></li></ul><ul><li>Scaffold Erection/Inspection Certification (onshore/offshore as applicable)</li><li>OSHA/NEBOSH/Corresponding Safety Certifications</li><li>Rigging/Signalperson certifications or equivalent</li></ul><br><p><b>Work Environment</b></p><br><br><ul><li><b>Site Location</b>:&nbsp;Basra, Iraq – Rumaila Field</li><li><b>Work Schedule</b>:&nbsp;Rotational schedule as dictated by project needs</li><li><b>Physical Demands</b>:&nbsp;On-site construction environment; standing, climbing, lifting, and exposure to outdoor conditions.</li><li><b>Safety &amp; Security</b>:&nbsp;Compliance with KBR’s safety programs, security protocols, and Iraq-specific regulations; adherence to emergency procedures.</li><li><b>Travel</b>:&nbsp;Occasional travel to other project sites or facilities as required.</li><li><b>Team Structure</b>:&nbsp;Reports to Construction/Scaffolding Superintendent or Site Engineering Lead; collaborates with construction crews, engineers, safety personnel, and subcontractors.</li></ul><br><p><b>Additional Information</b></p><br><br><ul><li>This role requires stringent adherence to safety standards and quality expectations due to the critical nature of on-site scaffolding in a high-hazard of Brown Field Projects environment.</li><li>The successful candidate will demonstrate a proven track record of delivering safe, compliant, and efficient scaffolding operations on complex projects.</li></ul><br><br><br> </div>

<p>Job Specification • Act as the primary liaison and first point of contact for ATC, RFF, Ground Handling Agents, Airlines, Engineering, and external stakeholders on all airside operational matters during the shift, escalating to the Head of Airside Operations where required. • Ensure strict enforcement of Airside Driving Regulations (ADR), Apron Discipline, and all active Airside Driving Permits (ADP) and Airside Vehicle Permits (AVP) throughout the shift; direct shift inspectors to act on violations and authorize the issuance of Non-Compliance Notices (NCN). • Coordinate and direct Wildlife Hazard Management activities during the shift, ensuring that wildlife observations are reported, logged, and acted upon in accordance with the Wildlife Hazard Management Plan, and that the runway and movement area remain safe for operations. • Oversee apron safety and operational discipline across all apron zones, including monitoring of ground handling activities, FOD prevention, fuel safety compliance, and resolution of apron. • Authorize and oversee emergency and contingency responses for airside-specific incidents during the shift — including runway/taxiway incursions, ground handling accidents, FOD alerts, fuel spills, airside vehicle accidents, and wildlife strikes — in accordance with the Airport Emergency Plan (AEP) and Airside Operations contingency procedures. • Complete, review, and submit comprehensive shift log reports capturing all significant events, incidents, operational decisions taken, and handover notes for each shift, ensuring accurate and auditable records for the Head of Airside Operations. • Conduct or delegate shift airside inspections of the movement area, apron, perimeter roads, and active worksites, ensuring compliance with ICAO Annex 14 standards, aerodrome certification requirements, and airport operational procedures. • Represent Airside Operations in real-time coordination calls, Airside Operations Room meetings, and pre/post-flight briefings during the shift as required. Human and Technical Resources • Direct and coordinate the full complement of Airside Operations shift staff across all sections for the duration of the shift, ensuring appropriate task allocation, coverage of all operational zones, and staff welfare. • Utilize the available management systems, stand planning tools, NOTAM databases, radio communication systems, and CCTV/surveillance platforms to maintain real-time situational awareness and operational control throughout the shift. • Ensure all shift operational vehicles and equipment are serviceable and deployed effectively; report unserviceable assets to the Head of Airside Operations and Engineering for immediate action. Planning and Programme • Review and brief all shift staff on the daily flight programme, scheduled airside works, active NOTAMs, planned closures, and any regulatory or safety advisories at shift commencement. • Contribute shift-level observations and operational data to the continuous improvement of Airside Operations procedures, SOPs, and contingency plans by providing structured feedback to the Head of Airside Operations. Core Operational Activities • Execute structured shift start and shift end handovers, ensuring all active permits, incidents, NOTAMs, ongoing works, and outstanding actions are clearly communicated and transferred to the incoming duty manager. • Authorize real-time operational decisions including temporary runway/taxiway restrictions, emergency equipment pre-positioning, and suspension of airside work activities when safety is at risk. • Coordinate the activation and stand-down of airside emergency responses for airside-specific incidents, ensuring all relevant parties (ATC, RFF, Ground Handlers, Engineering, airside operations team) are notified and deployed in accordance with the AEP. • Monitor and enforce FOD (Foreign Object Debris/Damage) prevention programmes across all apron and movement area zones, directing FOD inspections and ensuring immediate clearance of any identified debris. Human Resources Management • Provide direct line management, mentoring, and performance evaluation for all operational shift subordinates in alignment with the airport HR and competency framework. • Manage leave planning, duty rosters, and workforce scheduling to ensure continuous, uninterrupted operational coverage of all shift functions. • Identify training and career development opportunities for Operations Section staff and foster a safety-first, accountability-driven team culture.</p><p>Education • Bachelor's Degree, (Preferably in Aviation Management, Airport Operations, Aeronautical Science) Engineering, or a related discipline from a recognized institution. • A post-graduate qualification or diploma in Aviation/Airport Management is an added advantage) Experience • Minimum 6 years of progressive experience in airport airside operations, of which at least 2 years must be in a supervisory or senior Operational role with demonstrated shift management responsibility. • Proven experience in apron management, movement area operations, airside safety enforcement, and emergency/contingency coordination. • Experience across multiple Airside Operational functions is highly desirable. Computer Skills • Professional knowledge of Microsoft Suite (especially Word, PowerPoint and Excel) (Essential) • Demonstrated competency with various Airport Operations Management Systems (AODB, FIDS, stand planning tools), NOTAM databases, radio communication systems, and airside surveillance/CCTV platforms. Language Skills • English: solid written and spoken proficiency (Essential). English Language Proficiency - Minimum ICAO Level 4 or equivalent • Arabic: working proficiency (Desirable). Training Requirements • ICAO Annex 14 – Aerodromes (Essential). • ICAO Safety Management System (SMS) – ICAO-recognized institute (Essential). • Coordination of Emergency Response (Aerodrome Emergency Planning) (Essential). • Airside Driving Permit / Airside Driving Assessor certification (Highly Desirable). • Aerodrome Wildlife Hazard Management (Highly Desirable). • FOD Prevention Programme certification (Highly Desirable). • First Aid / Basic Life Support (Desirable).</p>

<p>Section Head, Security Standards, Quality Assurance & Compliance (HoSQC) The post holder is responsible for the daily management of the Standards, Quality Assurance & Compliance (SQC) team, and supporting the Head of Security Operations Support (HoSOS). This is a key role and includes ensuring that all Security Business Unit Departments and Sections adhere to external regulations, laws, and internal policies; identifying and rectifying non-compliance issues through audits; ensuring that processes, products, and services consistently meet AvSec quality standards and preventing defects through systematic activities and continuous improvement. A solid knowledge of compliance, audit and quality assurance systems and processes is vital, along with the ability to forge relationships with other sub departments and when required, the airport directorate, agencies and external stakeholders. Key Areas of Responsibility: a) Leadership: Lead and manage the Standards, Quality Assurance and Compliance Section and its team of staff members. b) Security provision: To ensure the airport’s security operations meet international standards, comply with ICAO Annex 17, IATA security protocols, and ICAA regulations, while embedding quality assurance, and compliance oversight into all security functions. c) Security Standards Development: Define and maintain security operational standards across passenger screening, baggage handling, cargo security access control. Align security procedures with ICAO, IATA and ICAA requirements. Maintain the library of SEC documentation, and develop and update programs, Manuals, Plans and SOPs for security functions as required. d) Quality Assurance: Establish & manage a Security Quality Management System. Conduct audits, inspections and performance reviews of security checkpoints, K9 Units and surveillance systems. Monitor security service delivery against Key Point Indicators (KPIs) and international benchmarks. Implement corrective & preventative measures to address deficiencies. e) Compliance Oversight: Ensure compliance with aviation security regulations, including ICAO Annex 17 and national directives. Liaise with ICAA and international regulators during inspections and certifications. Maintain documentation and evidence for regulatory audits and certifications. Report compliance risks and mitigation strategies to the Security Headquarters. f) Risk & Incident Integration: Collaborate with the Airport Safety Management System (SMS) and utilize the Security Management System (SeMS) to integrate security compliance findings into risk assessments. Support incident investigations (e.g. security breaches, prohibited items, etc.) and embed lessons learned into revised standards. g) Training Awareness: Liaise with the Security Training Team and develop training modules on security standards, compliance and quality assurance for airport security staff. Promote a culture of vigilance, compliance and continuous improvement. Undertake training delivery in support of the Security Training Team, as required. h) SQC Reporting: Prepare structured reports with clear recommendations and highlight compliance risks with mitigation strategies.</p><p>Education: National Level 3 AvSec Manager or equivalent, Quality Assurance, Auditing or a related field, ISO 9001 Quality Management System Certification or equivalent, Managing Safely (IOSH) or equivalent, Possess an AvSec Training qualification. Experience: Applicant must have an aviation background in quality assurance, compliance & audit roles. Minimum of 2 years in an Aviation security management role with domestic and/or international experience. Experience of operating in post conflict, multicultural & low infrastructure environments. Minimum of 3 years working within an airport and/or other highly regulated, physical security-based establishment Computer Skills: Knowledgeable in Microsoft Office suit (user´s perspective) and able to manage other specific project/management software, provided the adequate training. Language Skills: Solid knowledge and command of written and spoken English. Arabic language skills are desirable. Training Requirements: Have experience in training delivery in an airport environment. Behavioral Competencies: • Excellent leadership and team management skills. • Driving Change and continuous improvement. • Strong communication and interpersonal abilities. • Decision-making and problem-solving aptitude under pressure. • Customer-focused with a commitment to service excellence. • Networking, collaborative approach and stakeholders’ engagement and negotiation. • Conflict resolution and negotiation skills. • Delivering Results & Fostering Ownership. • High level of integrity and ethical standards. Technical Competencies: • ICAO Aviation Safety & Security regulations & procedures. • Knowledge of Security Management System (SeMS) principles & practices. • Expertise in compliance monitoring, risk assessment and audit processes for security operations. • Data Analysis from audits, inspections, incident reports. • Audit techniques and use of audit software tools. • Expertise in developing, implementing & maintaining QMS in accordance with ISO 9001 standards. • Risk Management – identification of risks and developing strategies to mitigate those risks. • Strong communication and reporting skills. • Training design and delivery skill sets. • Standards Development.</p>

<p>The Emergency Room Nurse Health Field Officer supports the implementation of functional Emergency Departments by strengthening triage, infection prevention and control (IPC), patient flow, referrals, documentation, and staff capacity. S/he provides training and bedside mentoring, supports mass casualty responses, and contributes to integrating Emergency Department and Pre-Hospital Emergency Care activities into a coordinated continuum of care.</p><p>Internally interacts with Health Department team and other relevant departments and programs (e.g., WatHab, Protection ), delegation support departments (Logistic, FAD), IRCS (Iraqi Red Crescent Society) Externally interacts with the MoH, Operations and Emergency Medicine Services department (OEMS) and, when necessary, international and local stakeholders (WHO, NGOs) in his/her geographic area or field of responsibility.</p><p><strong>Emergency Department Support in BAG and MOU AoRs</strong></p><ul><li>Works closely with the most relevant MoH and hospital interlocutors to establish and follow up the ED program, focusing on critical areas of Triage, crowd control, one-way patient flow, documentation, public awareness, referral pathway, standardized emergency quality care and mass casualty management.</li><li>Identifies knowledge gaps and recommends effective solutions through capacity-building initiatives ; contributes to the implementation and monitoring of national ED guideline/protocols and supports the development of Standard Operating Procedures (SOPs) to ensure the effective day-to-day management of the ED during both routinary activities and emergencies.</li><li>Supports, monitors, and evaluates the delivery of emergency care in the Emergency Department (ED). Utilizes established monitoring tools to collect high-quality data, assesses the implementation of activities, and promotes the long-term ownership and accountability of ED staff for sustaining improvements.</li></ul><p><strong>Capacity Building</strong></p><ul><li>Maintains regular presence in the ED, works closely with the ED nurses to ensure the delivery of high-quality patient care while supervising efficient patient flow and data monitoring and collection.</li><li>Ensures the integration of the nursing process into patient care, through close collaboration with the ED doctors and nurses.</li><li>Monitors clinical cases and actively guides nursing aspects of patient care, providing bedside teaching, mentorship and practical demonstrations as needed.</li><li>Delivers formal education sessions to ED nurses on all aspects of emergency nursing care offering evidence-based guidance and recommendations to strengthen clinical practice.</li><li>Participates in writing and implementing ED rules and regulation, treatment guidelines and protocols, clinical pathways, and quality indicators based on the MoH/ICRC guidelines with the ICRC Emergency Medicine Specialists.</li></ul><p><strong>Emergency preparedness and response</strong></p><ul><li>Strengthens the ED capacity to respond to disaster and emergencies by supporting the adoption of standardized and validated evidence-based competency frameworks.</li><li>Participates in raising awareness of the pre-disaster phase and in the elaboration of the Mass Casualty Incident Plan. (MCIP) Contributes to disaster preparedness initiatives, including the development and continuous improvement of the Mass Casualty Incident Plan (MCIP) and preparedness measures.</li><li>Maintains an up-to-date inventory and mapping of key hospitals across Federal Iraq to support emergency response planning, including Mass Casualty Incidents (MCIs).</li><li>Supports the training of healthcare staff on MCIP, by organising and facilitating running simulation exercises for enhance emergency response readiness.</li></ul><p><strong>Emergency Care System Program with MoH/OEMS</strong></p><ul><li>Supervises the coordination of key emergency nursing events and activities by serving as focal point with relevant stakeholders, including the MoH, the Iraqi Society for Emergency Medicine (ISEM), the Iraqi Nursing Syndicate (INS), and other partners, while facilitating logistical arrangements and coordination for related training initiatives and external engagements.</li><li>Actively participates in meetings of the Staff Safety and Violence Prevention Committee and Iraq Emergency Medicine Technical Working Group (IEMTWG), contributing to discussions aimed at improving the quality of patient care, safeguarding healthcare workers wellbeing, and strengthening adherence to international Emergency Department (ED) standards and requirements in support of the MoH.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Minimum of 3 years of postgraduate specialized clinical experience with knowledge of clinical protocols and guidelines</p><p>Demostrate experience working with humanitarian organization in similar contexts</p><p>Experience in working with local health authorities and other relevant stakeholders of interest.</p><h4>Certifications / Education required</h4><ul><li>Bachelor's degree in nursing or higher with critical background in Emergency Departments and experience in teaching, training and capacity building.</li><li>Qualification as traininer in Basic emergency care Course(BEC), IITT Triage Training knowledge are strong assets</li><li>Valid license to practice in Iraq</li><li>Fluent command of English and Arabic. (both written and oral).</li><li>Computer literacy( Microsoft Excel, PowerPoint and Word)</li></ul>

<p>Purpose and Scope: Supervise the Maintenance cycle to ensure satisfactory completion of the program objectives. Essential Responsibilities: Supervises all maintenance operations for assigned equipment in accordance with applicable PWS, Company policies, OSHA, DOT, ANSI, ASME and applicable military regulations. Supervises shop foreman and mechanics to include vacation planning, discipline, conducting performance evaluations, and training. Establishes job priorities and estimates down time. Coordinates work flow for downed equipment waiting for parts to minimize backlog of work and cost to customer division. Provides direct support to internal/external customers to ensure compliance, tracking efficiency, burn rates, equipment usage and maximizing cost avoidance measures. Supervises the recovery operations of MHE, VE, CE, Heavy and Light vehicle maintenance throughout assigned area of operation. Coordinates the proper administration, maintenance and distribution of approved publications, warranty documentation, and LDD and ECOD documentation. Provides input to management for forecasting and monitoring of the stock levels for required service/repair parts and petroleum. Responsible for the accurate and timely submission of all required plans and reports. Maintains effective lines of formal and informal communication amongst all levels of management (and the customer) as required. Coordinates collection and preparation of activity reports. Supervise and coordinate all maintenance activities required per the preventive maintenance program. Responsible to provide for and enforce guidelines to ensure the health, safety, and welfare of all assigned employees. Acts as the POC for all maintenance issues in the absence of the Maintenance Manager. Monitors team development and ensures the execution of performance evaluations in accordance with DI policy. Conduct site visits to establish professional relationships with maintenance teams, site personnel, and the customer as needed. Perform all other position related duties as assigned or requested.</p><p><strong>Desired Candidate Profile</strong></p><h2>Minimum Position Knowledge, Skills, and Abilities Required:</h2><ul><li>Associate's degree in an associated discipline</li><li>Two (2) years of experience in related field can be substituted for each year of college</li><li>Six (6) to eight (8) years of logistics experience in a military/tactical environment</li><li>Prefer at least three (3) years in a maintenance supervisor environment</li><li>Understanding of organizational maintenance and supply concepts and procedures</li><li>Understanding of maintenance production, production control and knowledge of U.S Army maintenance support systems?</li><li>Knowledge of MHE, heavy truck and or heavy equipment</li><li>Knowledge of equipment parts acquisition, warranty, LDD, and ECOD submissions</li><li>Must possess knowledge of DOT, OSHA, ANSI, ASME, Military regulations standards and OEM requirements</li><li>Knowledge of diagnostics and ability to conduct technical research</li><li>Strong understanding of Department of Defense contracting policies and procedures</li><li>Outstanding problem solving skills and sound judgment</li><li>Excellent writing, communication, leadership and interpersonal skills</li><li>Demonstrative proficiency in Microsoft application</li><li>Must be able to meet deployment status requirements</li></ul><h2>Work Environment, Physical Demands, and Mental Demands:</h2><ul><li>Ability to stand, sit, walk, stoop, squat, crouch, kneel, push and pull</li><li>Ability to lift and carry up to fifty (50) pounds</li><li>Assist in lifting up to one hundred (100) pounds</li><li>Able to work in both inside and outside conditions</li><li>Be exposed to dust, fumes and gases from running engines and motors</li><li>Living and working conditions at the assignment location could be remote and uncomfortable</li><li>Long hours, exposure to weather and hazardous conditions</li><li>Personnel should be aware of moving on short notice and under adverse conditions</li><li>Ability to travel domestically and internationally</li></ul><h2>Other Responsibilities:</h2><ul><li>Safety - Amentum enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid/buddy aid responsibilities, participating in emergency response tasks and serving on safety committees and teams.</li><li>Quality - Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the Amentum Quality Policy and carry out job activities in compliance with applicable Amentum Quality System documents and customer contracts. Each employee must read and understand his/her Quality Management and Customer Satisfaction responsibilities.</li><li>Procedure Compliance - Each employee must read, understand and implement the general and specific operational, safety, quality and environmental requirements of all plans, procedures and policies pertaining to his/her job.</li></ul>

<p>The post holder is responsible for the daily management of the Standards, Quality Assurance & Compliance (SQC) team, and supporting the Head of Security Operations Support (HoSOS). This is a key role and includes ensuring that all Security Business Unit Departments and Sections adhere to external regulations, laws, and internal policies; identifying and rectifying non-compliance issues through audits; ensuring that processes, products, and services consistently meet AvSec quality standards and preventing defects through systematic activities and continuous improvement. A solid knowledge of compliance, audit and quality assurance systems and processes is vital, along with the ability to forge relationships with other sub departments and when required, the airport directorate, agencies and external stakeholders. Key Areas of Responsibility: a) Leadership: Lead and manage the Standards, Quality Assurance and Compliance Section and its team of staff members. b) Security provision: To ensure the airport’s security operations meet international standards, comply with ICAO Annex 17, IATA security protocols, and ICAA regulations, while embedding quality assurance, and compliance oversight into all security functions. c) Security Standards Development: Define and maintain security operational standards across passenger screening, baggage handling, cargo security access control. Align security procedures with ICAO, IATA and ICAA requirements. Maintain the library of SEC documentation, and develop and update programs, Manuals, Plans and SOPs for security functions as required. d) Quality Assurance: Establish & manage a Security Quality Management System. Conduct audits, inspections and performance reviews of security checkpoints, K9 Units and surveillance systems. Monitor security service delivery against Key Point Indicators (KPIs) and international benchmarks. Implement corrective & preventative measures to address deficiencies. e) Compliance Oversight: Ensure compliance with aviation security regulations, including ICAO Annex 17 and national directives. Liaise with ICAA and international regulators during inspections and certifications. Maintain documentation and evidence for regulatory audits and certifications. Report compliance risks and mitigation strategies to the Security Headquarters. f) Risk & Incident Integration: Collaborate with the Airport Safety Management System (SMS) and utilize the Security Management System (SeMS) to integrate security compliance findings into risk assessments. Support incident investigations (e.g. security breaches, prohibited items, etc.) and embed lessons learned into revised standards. g) Training Awareness: Liaise with the Security Training Team and develop training modules on security standards, compliance and quality assurance for airport security staff. Promote a culture of vigilance, compliance and continuous improvement. Undertake training delivery in support of the Security Training Team, as required. h) SQC Reporting: Prepare structured reports with clear recommendations and highlight compliance risks with mitigation strategies.</p><p>Education: National Level 3 AvSec Manager or equivalent, Quality Assurance, Auditing or a related field, ISO 9001 Quality Management System Certification or equivalent, Managing Safely (IOSH) or equivalent, Possess an AvSec Training qualification. Experience: Applicant must have an aviation background in quality assurance, compliance & audit roles. Minimum of 2 years in an Aviation security management role with domestic and/or international experience. Experience of operating in post conflict, multicultural & low infrastructure environments. Minimum of 3 years working within an airport and/or other highly regulated, physical security-based establishment Computer Skills: Knowledgeable in Microsoft Office suit (user´s perspective) and able to manage other specific project/management software, provided the adequate training. Language Skills: Solid knowledge and command of written and spoken English. Arabic language skills are desirable. Training Requirements: Have experience in training delivery in an airport environment. Behavioral Competencies: • Excellent leadership and team management skills. • Driving Change and continuous improvement. • Strong communication and interpersonal abilities. • Decision-making and problem-solving aptitude under pressure. • Customer-focused with a commitment to service excellence. • Networking, collaborative approach and stakeholders’ engagement and negotiation. • Conflict resolution and negotiation skills. • Delivering Results & Fostering Ownership. • High level of integrity and ethical standards. Technical Competencies: • ICAO Aviation Safety & Security regulations & procedures. • Knowledge of Security Management System (SeMS) principles & practices. • Expertise in compliance monitoring, risk assessment and audit processes for security operations. • Data Analysis from audits, inspections, incident reports. • Audit techniques and use of audit software tools. • Expertise in developing, implementing & maintaining QMS in accordance with ISO 9001 standards. • Risk Management – identification of risks and developing strategies to mitigate those risks. • Strong communication and reporting skills. • Training design and delivery skill sets. • Standards Development.</p>

<p><h4>Purpose and scope:</h4> <p>Supervise the maintenance cycle to ensure satisfactory completion of the program objectives.</p> <h4>Essential responsibilities:</h4> <ul> <li>Supervise all maintenance operations for assigned equipment in accordance with applicable PWS, company policies, OSHA, DOT, ANSI, ASME and applicable military regulations.</li> <li>Supervise shop foreman and mechanics to include vacation planning, discipline, conducting performance evaluations, and training.</li> <li>Establish job priorities and estimate down time.</li> <li>Coordinate workflow for downed equipment waiting for parts to minimize backlog of work and cost to customer division.</li> <li>Provide direct support to internal and external customers to ensure compliance, tracking efficiency, burn rates, equipment usage and maximizing cost avoidance measures.</li> <li>Supervise the recovery operations of MHE, VE, CE, heavy and light vehicle maintenance throughout assigned area of operation.</li> <li>Coordinate the proper administration, maintenance and distribution of approved publications, warranty documentation, and LDD and ECOD documentation.</li> <li>Provide input to management for forecasting and monitoring of the stock levels for required service and repair parts and petroleum.</li> <li>Responsible for the accurate and timely submission of all required plans and reports.</li> <li>Maintain effective lines of formal and informal communication amongst all levels of management and the customer as required.</li> <li>Coordinate collection and preparation of activity reports.</li> <li>Supervise and coordinate all maintenance activities required per the preventive maintenance program.</li> <li>Provide for and enforce guidelines to ensure the health, safety, and welfare of all assigned employees.</li> <li>Act as the point of contact for all maintenance issues in the absence of the Maintenance Manager.</li> <li>Monitor team development and ensure the execution of performance evaluations in accordance with DI policy.</li> <li>Conduct site visits to establish professional relationships with maintenance teams, site personnel, and the customer as needed.</li> <li>Perform all other position related duties as assigned or requested.</li> </ul> <h4>Minimum position knowledge, skills, and abilities required:</h4> <ul> <li>Associate's degree in an associated discipline.</li> <li>Two years of experience in related field can be substituted for each year of college.</li> <li>Six to eight years of logistics experience in a military or tactical environment.</li> <li>Prefer at least three years in a maintenance supervisor environment.</li> <li>Understanding of organizational maintenance and supply concepts and procedures.</li> <li>Understanding of maintenance production, production control and knowledge of U.S. Army maintenance support systems.</li> <li>Knowledge of MHE, heavy truck and/or heavy equipment.</li> <li>Knowledge of equipment parts acquisition, warranty, LDD, and ECOD submissions.</li> <li>Must possess knowledge of DOT, OSHA, ANSI, ASME, military regulations, standards and OEM requirements.</li> <li>Knowledge of diagnostics and ability to conduct technical research.</li> <li>Strong understanding of Department of Defense contracting policies and procedures.</li> <li>Outstanding problem solving skills and sound judgment.</li> <li>Excellent writing, communication, leadership and interpersonal skills.</li> <li>Demonstrative proficiency in Microsoft applications.</li> <li>Must be able to meet deployment status requirements.</li> </ul> <h4>Work environment, physical demands, and mental demands:</h4> <ul> <li>Ability to stand, sit, walk, stoop, squat, crouch, kneel, push and pull.</li> <li>Ability to lift and carry up to fifty pounds.</li> <li>Assist in lifting up to one hundred pounds.</li> <li>Able to work in both inside and outside conditions.</li> <li>Be exposed to dust, fumes and gases from running engines and motors.</li> <li>Living and working conditions at the assignment location could be remote and uncomfortable.</li> <li>Long hours, exposure to weather and hazardous conditions.</li> <li>Personnel should be aware of moving on short notice and under adverse conditions.</li> <li>Ability to travel domestically and internationally.</li> </ul> <h4>Other responsibilities:</h4> <ul> <li><strong>Safety:</strong> Enforce a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid and buddy aid responsibilities, participating in emergency response tasks and serving on safety committees and teams.</li> <li><strong>Quality:</strong> Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the Quality Policy and carry out job activities in compliance with applicable Quality System documents and customer contracts. Each employee must read and understand his or her Quality Management and Customer Satisfaction responsibilities.</li> <li><strong>Procedure compliance:</strong> Each employee must read, understand and implement the general and specific operational, safety, quality and environmental requirements of all plans, procedures and policies pertaining to his or her job.</li> </ul></p><p></p>

<p>Supervise the Maintenance cycle to ensure satisfactory completion of the program objectives.</p><p>Supervises all maintenance operations for assigned equipment in accordance with applicable PWS, Company policies, OSHA, DOT, ANSI, ASME and applicable military regulations.</p><p>Supervises shop foreman and mechanics to include vacation planning, discipline, conducting performance evaluations, and training.</p><p>Establishes job priorities and estimates down time.</p><p>Coordinates work flow for downed equipment waiting for parts to minimize backlog of work and cost to customer division.</p><p>Provides direct support to internal/external customers to ensure compliance, tracking efficiency, burn rates, equipment usage and maximizing cost avoidance measures.</p><p>Supervises the recovery operations of MHE, VE, CE, Heavy and Light vehicle maintenance throughout assigned area of operation.</p><p>Coordinates the proper administration, maintenance and distribution of approved publications, warranty documentation, and LDD and ECOD documentation.</p><p>Provides input to management for forecasting and monitoring of the stock levels for required service/repair parts and petroleum.</p><p>Responsible for the accurate and timely submission of all required plans and reports.</p><p>Maintains effective lines of formal and informal communication amongst all levels of management (and the customer) as required.</p><p>Coordinates collection and preparation of activity reports.</p><p>Supervise and coordinate all maintenance activities required per the preventive maintenance program.</p><p>Responsible to provide for and enforce guidelines to ensure the health, safety, and welfare of all assigned employees.</p><p>Acts as the POC for all maintenance issues in the absence of the Maintenance Manager.</p><p>Monitors team development and ensures the execution of performance evaluations in accordance with DI policy.</p><p>Conduct site visits to establish professional relationships with maintenance teams, site personnel, and the customer as needed.</p><p>Perform all other position related duties as assigned or requested.</p><p>Ability to stand, sit, walk, stoop, squat, crouch, kneel, push and pull</p><p>Ability to lift and carry up to fifty (50) pounds</p><p>Assist in lifting up to one hundred (100) pounds</p><p>Able to work in both inside and outside conditions</p><p>Be exposed to dust, fumes and gases from running engines and motors</p><p>Living and working conditions at the assignment location could be remote and uncomfortable</p><p>Long hours, exposure to weather and hazardous conditions</p><p>Personnel should be aware of moving on short notice and under adverse conditions</p><p>Ability to travel domestically and internationally</p><p>Amentum enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid/buddy aid responsibilities, participating in emergency response tasks and serving on safety committees and teams.</p><p>Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the Amentum Quality Policy and carry out job activities in compliance with applicable Amentum Quality System documents and customer contracts. Each employee must read and understand his/her Quality Management and Customer Satisfaction responsibilities.</p><p>Each employee must read, understand and implement the general and specific operational, safety, quality and environmental requirements of all plans, procedures and policies pertaining to his/her job.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Associate's degree in an associated discipline</li><li>Two (2) years of experience in related field can be substituted for each year of college</li><li>Six (6) to eight (8) years of logistics experience in a military/tactical environment</li><li>Prefer at least three (3) years in a maintenance supervisor environment</li><li>Understanding of organizational maintenance and supply concepts and procedures</li><li>Understanding of maintenance production, production control and knowledge of U.S Army maintenance support systems</li><li>Knowledge of MHE, heavy truck and or heavy equipment</li><li>Knowledge of equipment parts acquisition, warranty, LDD, and ECOD submissions</li><li>Must possess knowledge of DOT, OSHA, ANSI, ASME, Military regulations standards and OEM requirements</li><li>Knowledge of diagnostics and ability to conduct technical research</li><li>Strong understanding of Department of Defense contracting policies and procedures</li><li>Outstanding problem solving skills and sound judgment</li><li>Excellent writing, communication, leadership and interpersonal skills</li><li>Demonstrative proficiency in Microsoft application</li><li>Must be able to meet deployment status requirements</li></ul>

<p>Receiving, checking, verification and recording of vendors and employees invoices in ERP system in accordance with company policies &amp; guidelines. Dealers, Shops &amp; Franchisees Invoices &amp; Receipts recording and reconciliation. Sales and Receipts reporting and archiving. Receive the vendor invoices and arrange all the supporting documents for processing the invoice. Review the invoices and matching it with the related PO s and other supporting documents to ensure that all the related documents are in place before processing any invoice. Arrange all necessary invoice approvals as per company policies and procedures before recording the invoice. Prepare the Data Loader for bulk uploading of invoices in ERP. Record vendor invoice in the ERP by completing all the necessary details including but not limited to Vendor Name, Invoice Description, Item, Quantity, Price, Project, Cost Centre, Site &amp; Region. Match vendor invoice in ERP with PO, Contract etc. Define vendor invoice payments terms, payment schedule, penalties, deductions, withholding tax etc. Ensures credit is received / recorded through Debit Memos in ERP. Record vendor advances in ERP as Prepayment Invoices. Adjustment of Prepayment Invoices with Standard Invoices in ERP. Receive request for employee advances both for official and personal purposes. Verify the employee advances approval and other supporting documents as per company policy and procedures. Record employee advances as Prepayment Invoices in ERP. Receive employee invoices and arrange all the supporting documents and approvals for processing the invoice. Record employee invoice in the ERP by completing all the necessary details and adjusting the any outstanding prepayment against the employee. Maintains historical records by filing vendor and employee related documents. Define suppliers in ERP and made any change in supplier mapped data in ERP. Participate in and/or lead projects or events as assigned &amp; in stock inventory or cash counting on monthly basis or quarterly basis or as assigned. Dealers receipt review for checking Receipt Date, Customer Name, Receipt Amount, Bank Account etc. Record Dealers receipts on daily basis in ERP. Check the original receipt with the one recorded in ERP. Resolve issues for recording receipts and reconciling differences, if any. Record Transfer between the dealers invoice and receipt. Record Dealer to Retailer Invoice against Bill payments. Record Dealers commission. Extract the Daily Sales &amp; Receipts Report and organize them for further checking and reconciliations. Share the Daily Sales &amp; Receipts Reports with Finance users and Archiving team. Record all Receipt related to cash box in ERP. Record all Deposit from B2B shop to Bank in ERP and make clearing of B2B Shops and Banks. Record All wire transfer received from Customers on confirmation from Bank team along with their respective Bank charge in ERP and make clearing for wire transfers and Banks. Record all cheques Received from B2B and make clearing for bank and shops in ERP system. Record Receipts after confirmation from bank in ERP. Create receipt from ERP for all cheque and wire transfer and confirmed to Apply with the invoices. Check opening and closing balance in daily Cash in Shop reports and reconcile after resolving differences, if any. Check warehouse orders and daily stock addition in Daily report and reconcile differences, if any. Check ERP transaction report and Billing daily report and reconcile differences, if any. Record all the invoices correctly and on timely basis. Adjustment of all Prepayments / Advances with the respective invoices on timely basis. Define supplier on the same day when request is received. Complete Invoice and Receipts recording on daily basis in ERP. Timely Recording of Dealers and Retailers transaction in ERP. Reconciliation of Receipts on daily basis. Reconciliation of Billing and ERP reports. Timely Sales and Receipt report submission and archiving</p><p><strong>Desired Candidate Profile</strong></p><ul><li>BSC in Accounting or related functions</li><li>Work Experience 0-1 Year in Accounts Payables or related functions</li><li>Language Skills (Arabic, English)</li><li>Microsoft Office Skills (Excel &amp; word)</li><li>Behavioral Competencies: Delivering Results &amp; Fostering Ownership Building Customer Value Networking &amp; Influencing Collaboratively Leading Teams Driving Change</li><li>Technical Competencies: Accounting Standards Business English Credit &amp; Collection Process Accounting Knowledge MS Office Internal Control</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><strong>Overview</strong> This position will be physically located in Iraq in support of LOGCAP</p><p>Under the supervision of the Senior Materials Manager and/or Task Order Manager, the Materials Manager manages a staff of employees in the performance of all aspect of LOGCAP V Materiel Management and Accounting at the assigned location in accordance with DFARS PHONE_NUMBER. Maintains records and logs of materiel received, transferred, allocated, held and disposed; coordinates materiel transfers throughout the AOR, conducts periodic materiel inventories, and prepares report of materiel status.</p><p><strong>Responsibilities</strong> This position description is subject to change at any time as needed to meet the requirements of the program or company.</p><p>Provide assistance to the Site Manager and or Task Order Manager, in order to effectively manage all Government Furnished Materiel (GFM) to help develop and coordinate the implementation of Property policies and procedures. Responsible for ordering and tracking materiel request and perform clerical and manual duties in program areas including receiving, storing, issuing, and delivering materiel in support of LOGCAP V Iraq Task Order. Identifies, plans and coordinates workload assignments to optimize use of resources to include personnel and equipment management in support of materiel management functional area requirements. Utilizes a good working knowledge of governing materiel management systems, programs, policies, procedures, and established guidelines, to take appropriate control and action based upon application or interpretation of established guidelines. Must have a thorough and working knowledge of the Government Regulations to include FAR, DFARS, AR710-2 D.A. PAM 710-2-1 and the Vectrus LOGCAP Property Management Plan. Accurately manages inventory levels by regularly checking shelves, updating the database and preparing inventory reports, and maintain an electronic database to generate various reports as assigned. Coordinate with subordinates to ensure all required reports are submitted accurately and on time. Provides management direction and oversight to include overseeing day to day materiel control operations. This may include but not limited to inventory reporting, proper materiel storage, materiel receiving, shipping and preparation of all supporting documentation. Assist and maintain 100% accountability of all Materiel records through the Maximo Implementation System and must have knowledge of Army Supply System including DLIS FedLog as required. Conduct periodic checks on warehouse operations, to ensure materiel accountability is being maintained. Ensures that employees are always in compliance with established Safety Policies, Regulations, and Reporting. Ensures proper safeguard, storage, and utilization of all government furnished materiel. Ensures that record maintenance is being performed on a regular basis to make sure that records are updated and accurate. Performs other duties and assignments as required.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>One-year related experience may be substituted for one year of education, if degree is required. Associate Degree and five years experience or High School diploma and 8 years experience.</li><li>Must be CAC eligible and/or able to obtain a Common Access Card (CAC)</li><li>Must be a U.S. Citizen</li><li>Minimum of 5 years specialized experience in materiel management operations.</li><li>Must exhibit strong organization and communication skills.</li><li>Must be capable of effectively communicating technical information, both written and verbal.</li><li>Must be familiar with Materiel Management operating Systems</li><li>Must be familiar with appropriate FAR, DFARs, ARs (Army Regulations) and correct publications concerning all supply activities for the receipt, storage, inventory and issue of materiel to include Materiel Disposition.</li><li>Supervises the Materials control team at the assigned site location.</li><li>Must be capable of working in an extreme weather conditions with temperatures exceeding 120 degrees Fahrenheit. Indoor and/or outdoor environment with very adverse and harsh conditions (i.e., hot, dry, dusty, desert environment with average temperatures of 30 degrees in the winter and 130 degrees in the summer months). Includes some industrial production environment conditions as well.</li><li>Light work. Exerting up to 20 pounds of force occasionally, and/or up to 10 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects. Work may require heavy lifting, stooping, climbing, prolonged standing, prolonged sitting, and working with or in areas where a potential could exist for exposure to physical, chemical, or biological agents. Employee use of personal protective equipment (PPE) is required for some situations. PPE includes, but is not limited to, head, foot, torso, respiratory, vision, and hearing protective devices.</li><li>Must comply with all Fire and Safety Regulations and post policies.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Aerostat Operators provide Operations and Sustainment (O&amp;S) support for the Persistent Surveillance Systems Tethered (PSS-T) program in OCONUS site locations. PSS-T is comprised of former Persistent Ground Surveillance System (PGSS) and Persistent Threat Detection System (PTDS) programs. Essential Responsibilities: Aerostat Operators/User-level maintainers will participate in the overall, hands-on operation of the aerostat system including launch, in-flight, recovery, and moored activities. Candidates will perform all functions to operate the PGSS/PTDS, an aerostat mounted Intelligence, Surveillance, And Reconnaissance (ISR) platform, its Mobile Mooring Platform (MMP), Sensor Payload(s), communications and navigation systems as well as associated support equipment (Boom Lift, Forklift, All Terrain Vehicles (ATV's), and Electrical Power Generators). Additional responsibilities include performing analyses of system operations and candidates must have:</p><p>Knowledge of and experience in the operations of hardware systems and components. Experience in fault detection, isolation, and correction of hardware systems and individual components. Ability to perform routine system maintenance and analysis functions including: hardware configurations; adding, removing and replacing hardware components; use of hardware and software diagnostic testing tools; reading of electronic circuit schematics; and repairing printed circuit boards. Candidate will perform User-level maintenance functions include performing hands-on Preventative Maintenance Checks and Services (PMCS), troubleshooting, removing and replacing Line Replaceable Units (LRUs), and removing and replacing payloads. Candidate must possess a diverse range of skills with the ability to quickly adapt to new situations. Tasks will be performed under direction of higher classified technicians and/or site personnel.</p><p>Physical Requirements: Requires the ability to regularly lift up to 50 lbs. Requires the ability to regularly climb extension ladders, roof ladder, stepladders, and stairs at least 10 times during shift. Requires the flexibility to bend/stoop, squat repetitive during shift. Requires the ability to regularly kneel repetitive for shift. Requires the ability to move in a 90-degree fashion on a repetitive basis for shift. Requires the ability to stretch/reach on a repetitive basis for shift. Requires the ability to walk extensively throughout the plant during shift. Requires the ability to interact with all clients in a professional and friendly manner despite periods of stress.</p><p>Medical Requirements Successfully complete and pass the medical and dental examinations as required by Amentum and our customer for deployment to Iraq. Must maintain physical and dental requirements for the duration of the deployment.</p><p>Working and Living Conditions: This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environment. Temperatures can reach PHONE_NUMBER degrees Fahrenheit/50-55 degrees Celsius during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to CENTCOM, EUCOM, and AFRICOM for extended periods. Work schedules are a minimum of 6 days per week and 10 hours per day, while some jobs have higher daily and weekly minimums. #TAMOD</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>High school diploma or equivalent is required.</li><li>Two-year Associate s degree in a technical field from an accredited college can substitute for work experience.</li><li>Must have an active Secret US Government Clearance.</li><li>Note: US Citizenship is required to obtain a Secret Clearance.</li><li>At least ONE (1) year previous Aerostat experience.</li><li>Certified and school trained on 34M and 74K.</li><li>Must have a valid U.S. passport with a minimum of one year remaining.</li><li>Must have valid US Driver's license.</li><li>Knowledge of and experience in the operations of hardware systems and components.</li><li>Experience in fault detection, isolation, and correction of hardware systems and individual components.</li><li>Ability to perform routine system maintenance and analysis functions including: hardware configurations; adding, removing and replacing hardware components; use of hardware and software diagnostic testing tools; reading of electronic circuit schematics; and repairing printed circuit boards.</li><li>Candidate must possess a diverse range of skills with the ability to quickly adapt to new situations.</li></ul><p></p></section>