وظائف مدير مكتب

<p>The Horizontal Foreman will be based at Baghdad Embassy Compound (BEC) Amentum site in Iraq and serve the Operations and Maintenance Support Services (OMSS) contract in support of the U.S. Department of State. This position will be responsible for managing the daily work assignments of Material Handling and Heavy Equipment Operations and will report to the Operations and Maintenance Manager.</p><p>The duties and responsibilities listed below are representative of the nature and level of work assigned and are not necessarily all inclusive.</p><p>DUTIES:</p><ul><li>Responsible for maintaining a safe workplace and ensuring that safety is the highest priority in the workplace.</li><li>Comply with all Environmental Health &amp; Safety and Quality Assurance requirements and goals.</li><li>Provide information and materials to these divisions as necessary to ensure adequate and legal documentation.</li><li>Provide oversight of all material handling and heavy equipment support operations.</li><li>Primary responsibilities will be the safety and professional operations of a daily multi-national workforce and ensuring that all work requests are completed.</li><li>Schedule daily work assignments of personnel.</li><li>Review work orders and support requests to determine safety requirements, permitting, and equipment needs.</li><li>Manage all work order activity to ensure that all work is properly documented and submitted for recording.</li><li>Provide reports and data - both required and ad hoc.</li><li>Ensure adequate supplies and materials are ordered for department.</li><li>Ensure personnel are properly trained in equipment operation.</li><li>Monitor and evaluate performance of personnel.</li><li>Perform additional duties and projects as assigned.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Minimum Acceptable Experience Level: Two (2) years experience with Horizontal Earthwork and Material Handling Equipment including forklifts, cranes, loaders, bulldozers, skid steers, and semi-tractor trucks.</li><li>Knowledge, Skills, and Abilities:<ul><li>Good time management skills and able to multi-task using various types of cranes and rigging gear.</li><li>Knowledge of proper loading techniques and forklift weight capacities.</li><li>Ability to lift up to 30 pounds, bend, stoop, and climb in and around construction type equipment and work in adverse climatic conditions.</li><li>Ability to coordinate and complete basic Transportation Movement Request (TMR).</li><li>Prior experience in working with a multi-national workforce</li><li>Ability to extract information to produce reports.</li><li>Ability to communicate with a wide variety of colleagues and customers.</li><li>Knowledge of principles and processes involved in supporting contract responsibilities at an overseas facility.</li><li>Ability to work in a fast-paced environment that requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules.</li><li>Cross-cultural sensitivity with an international perspective.</li><li>Excellent organizational and time management skills.</li><li>Computer skills, specifically in Microsoft Word and Excel.</li><li>Ability to become an active and functioning member of a team.</li><li>Ability to be innovative and be an agent for change.</li><li>Expert communication skills to facilitate and disseminate information.</li></ul></li><li>Education: A high school diploma or GED.</li><li>Passport, Licenses and Certifications: As part of pre-contingency requirements, by the time the visa process starts , candidates must possess a valid passport with a minimum of 18 months remaining to expiration date with 8 blank pages.</li><li>Valid drivers license from Home of Record.</li><li>Security Vetting: Already possess a US Government issued security clearance or Moderate Risk Public Trust (MRPT) or be able to obtain a favorable MRPT certification or US Government clearance prior to being hired is required for the position. Must maintain eligibility at the required certification or clearance level for the duration of the contract.</li><li>Language Skills: Satisfactory English proficiency to meet job requirements and to adhere and comply with safety, health, and security measures.</li><li>Medical: Successfully complete and pass the medical and dental examinations as required by Amentum and our customer for deployment to Iraq. Must maintain physical and dental requirements for duration of deployment.</li><li>Relevant overseas contract experience.</li><li>Previous work experience in harsh environmental conditions are a plus.</li><li>Experience working with Amentum.</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Horizontal Foreman will be based at Baghdad Embassy Compound (BEC) Amentum site in Iraq and serve the Operations and Maintenance Support Services (OMSS) contract in support of the U.S. Department of State. This position will be responsible for managing the daily work assignments of Material Handling and Heavy Equipment Operations and will report to the Operations and Maintenance Manager. The duties and responsibilities listed below are representative of the nature and level of work assigned and are not necessarily all inclusive. DUTIES: Responsible for maintaining a safe workplace and ensuring that safety is the highest priority in the workplace. Comply with all Environmental Health &amp; Safety and Quality Assurance requirements and goals. Provide information and materials to these divisions as necessary to ensure adequate and legal documentation. Provide oversight of all material handling and heavy equipment support operations. Primary responsibilities will be the safety and professional operations of a daily multi-national workforce and ensuring that all work requests are completed. Schedule daily work assignments of personnel. Review work orders and support requests to determine safety requirements, permitting, and equipment needs. Manage all work order activity to ensure that all work is properly documented and submitted for recording. Provide reports and data - both required and ad hoc. Ensure adequate supplies and materials are ordered for department. Ensure personnel are properly trained in equipment operation. Monitor and evaluate performance of personnel. Perform additional duties and projects as assigned.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>REQUIRED: Minimum Acceptable Experience Level: Two (2) years experience with Horizontal Earthwork and Material Handling Equipment including forklifts, cranes, loaders, bulldozers, skid steers, and semi-tractor trucks. Knowledge, Skills, and Abilities: Good time management skills and able to multi-task using various types of cranes and rigging gear. Knowledge of proper loading techniques and forklift weight capacities. Ability to lift up to 30 pounds, bend, stoop, and climb in and around construction type equipment and work in adverse climatic conditions. Ability to coordinate and complete basic Transportation Movement Request (TMR). Prior experience in working with a multi-national workforce Ability to extract information to produce reports. Ability to communicate with a wide variety of colleagues and customers. Knowledge of principles and processes involved in supporting contract responsibilities at an overseas facility. Ability to work in a fast-paced environment that requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules. Cross-cultural sensitivity with an international perspective. Excellent organizational and time management skills. Computer skills, specifically in Microsoft Word and Excel. Ability to become an active and functioning member of a team. Ability to be innovative and be an agent for change. Expert communication skills to facilitate and disseminate information. Education: A high school diploma or GED. Passport, Licenses and Certifications: As part of pre-contingency requirements, by the time the visa process starts , candidates must possess a valid passport with a minimum of 18 months remaining to expiration date with 8 blank pages. Valid drivers license from Home of Record. Security Vetting: Already possess a US Government issued security clearance or Moderate Risk Public Trust (MRPT) or be able to obtain a favorable MRPT certification or US Government clearance prior to being hired is required for the position. Must maintain eligibility at the required certification or clearance level for the duration of the contract. Language Skills: Satisfactory English proficiency to meet job requirements and to adhere and comply with safety, health, and security measures. Medical: Successfully complete and pass the medical and dental examinations as required by Amentum and our customer for deployment to Iraq. Must maintain physical and dental requirements for duration of deployment. DESIRED: Relevant overseas contract experience. Previous work experience in harsh environmental conditions are a plus. Experience working with Amentum. OTHER RESPONSIBILITIES Safety - Amentum enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid/buddy aid responsibilities, participating in emergency response tasks, and serving on safety committees and teams. Quality - Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the Amentum Quality Policy and carry out job activities in compliance with applicable Amentum Quality System documents and customer contracts. Each employee must read and understand his/her Quality Management and Customer Satisfaction responsibilities. Procedure Compliance - Each employee must read, understand, and implement the general and specific operational, safety, quality and environmental requirements of all plans, procedures and policies pertaining to job. WORKING AND LIVING CONDITIONS: This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environment. Temperatures can reach 120- 130 degrees Fahrenheit/50-55 degrees Celsius during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to Iraq for extended periods. Work schedules are a minimum of 6 days per week and 10 hours per day, while some jobs have higher daily and weekly minimums. Employees must be willing and able to perform physical activities including, but not limited to, heavy lifting and moving of items, parts, assemblies, and equipment up to the safety regulation maximum; climbing in and out of equipment; crawling; and working outdoors. This includes being able to lift and carry 40 pounds of personal protective equipment for extended periods of time and being capable of running and duck &amp; cover during emergencies without putting oneself or others at risk.</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Senior CWI Engineer<br><br>Position Details<ul><li>Position Title: CWI Senior Engineer</li><li>Department: Wells</li><li>Location: Majnoon Oil Field – Basra, Iraq</li><li>Reports to: CWI Engineering Team Lead</li><li>Direct Reports: None</li></ul>1. Role Purpose<p>Provide engineering expertise in the planning, design, and execution support of completions, workover, well intervention and well integrity operations. Ensure high-quality engineering input, technical assurance, well integrity compliance, and continuous performance improvement across CWI operations.</p><br><br>2. Key ResponsibilitiesHSSE &amp; Well Integrity<ul><li>Champion a proactive safety culture with Zero Harm.</li><li>Conduct site safety visits, audits, and toolbox talk reviews.</li><li>Ensure compliance with well integrity standards such as NORSOK D‑010</li><li>Ensure engineering designs comply with HSSE policies, Life-Saving Rules, and well integrity guidelines.</li><li>Participate in risk assessments, HAZID, HAZOP, and technical assurance reviews.</li><li>Support incident investigations by providing technical analysis and recommendations.</li></ul>Program Development &amp; Technical Assurance<ul><li>Prepare and review Completion Programs, Workover Programs, and Intervention Procedures.</li><li>Develop well schematics, tool string designs, barrier philosophies, and risk assessments.</li><li>Ensure engineering designs comply with well integrity standards and operational requirements.</li><li>Perform technical evaluations for new technologies, equipment, and intervention methods.</li></ul>Operational Support &amp; Problem Solving<ul><li>Provide real-time engineering support to wellsite supervisors during operations.</li><li>Analyze operational challenges and propose technical solutions.</li><li>Perform pre-job and post-job reviews to ensure procedural compliance.</li><li>Support SIMOPS planning and coordination with Production, Subsurface, and Drilling teams.</li></ul>Cost &amp; Schedule Control<ul><li>Support development of budgets, forecasts, and AFE inputs.</li><li>Monitor job efficiency, performance, and operational KPIs.</li><li>Identify cost‑saving opportunities without compromising safety or quality.</li></ul>Contractor &amp; Performance Management<ul><li>Lead technical interface with service companies and contractors.</li><li>Evaluate technical proposals, equipment specifications, and new technologies.</li><li>Support tendering, technical evaluations, scopes of work, and contract management.</li><li>Monitor service quality and ensure alignment with engineering requirements.</li></ul>Reporting &amp; Governance<ul><li>Review technical proposals from service companies and ensure alignment with operational requirements.</li><li>Participate in contractor performance reviews and technical evaluations.</li><li>Ensure QA/QC compliance for equipment and tools used in rigless operations.</li></ul>3. Qualifications &amp; Experience<ul><li>Bachelor’s degree in Petroleum, Mechanical, or related Engineering discipline.</li><li>8-12+ years of experience in completions, well intervention, workover, and well integrity engineering disciplines.</li><li>Valid IWCF Level 4 Well Intervention Pressure Control certification.</li><li>Strong experience leading CWI engineering teams in high‑activity onshore fields.</li><li>Comprehensive understanding of well integrity standards (e.g., NORSOK D‑010), well control, and barrier management.</li><li>Strong knowledge of international standards (API, ISO, IOGP) and regulatory compliance requirements.</li><li>Expertise in completion, CT, slickline, e-line, ESP, stimulation, and workover engineering.</li><li>Experience in Iraq/Majnoon preferred.</li><li>Fluency in English; Arabic is an advantage.</li></ul>4. Core Competencies<ul><li>CWI Technical Mastery</li><li>Well Integrity &amp; Risk Management</li><li>Engineering &amp; HSSE Leadership</li><li>Performance Management &amp; Continuous Improvement</li><li>Cross‑Functional Collaboration</li><li>Contractor &amp; Stakeholder Management</li><li>Communication &amp; Technical Reporting</li></ul><br><p>Approved By: Steven Hendry</p><br><br><br><p>Position: Wells Manager</p><br><br><br><p>Date: 03 Mar 2026</p><br><br><br><br><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><b><br></b></p><p><b>Job Objectives:</b></p><p>HSE activities:</p><ul><li>Support and enforce project guidelines, HSE objectives and global improvement (e.g. referential, Golden Rules, reporting, REX, audits, Maestro, trainings, HSE action plans ).</li><li>Responsible for the respect of the HSE Rules and Company Specifications for his activity (also in term of QA &amp; QC)</li><li>Attend HSE meetings and training when necessary.</li><li>Initiate and/or Participate in Job Safety Analysis, make suggestions, stop dangerous situations, and report anomalies and dangerous acts.</li><li>Conduct toolbox talks and enforce safe work practices</li></ul><p>Asset Integrity:</p><ul><li>Contributes to the Ratawi Asset Integrity initiative by reporting any anomaly, defect, bad practice, lack of equipment, lack of competence that could result in a major HSE incident or loss of production.</li></ul><p>Daily Activities and missions:</p><ul><li>Supervise and coordinate construction activities for Electrical and Instrumentation directly with the Contractor.</li><li>Follow up and ensure the selected Contractor s to carry out works in their premises in prefabrication and under construction on the Sites</li><li>Ensure adherence to project specifications, drawings, and quality standards.</li><li>Lead E&amp;I work preparation and execution with Contractor to ensure adequate progress in line with planning and project milestones</li><li>Prepare, Review and validate construction methods and work instructions closely with the construction contractor</li><li>Ensure the proper execution of the works in compliance with safety and environmental protection procedures, technical specifications, budgets, and schedules,</li><li>Check the procedures and task sheets of the Companies, participate, or control the risk analyses, help in the preparation / check the work permits,</li><li>Resolve technical issues on-site in coordination with engineering teams.</li><li>Manage subcontractors and ensure proper allocation of manpower and equipment.</li><li>Optimize and follow up the work schedules, to do this check the good organization of the logistics and the Contractor's site</li><li>Control material deliveries and verify conformity with project requirements</li><li>Anticipate all potential problems, propose, if necessary, alternative "practical" solutions,</li><li>Organise Pre-commissioning activities, formalize handover dossier to Field Operations, ensure that mark-up documentation is reflecting the site condition and forward those to Engineering.</li><li>Monitor progress and report daily to the Construction Manager</li><li>Maintain good relationships with contractors, displaying flexibility when needed while also enforcing necessary standards.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Expected: Looking for an experienced E&amp;I Lead in onshore Greenfield and brownfield project with a very good knowledge of General Specifications, rules, procedures and International Codes and Standards.</p><p>Bachelor s degree in engineering or construction field.</p><p>10 to 15 years of experience in the oil industry, with significant experience in Construction.</p><p>Previous experience under SIMOPS works will be considered as a plus.</p><p>Team player with ability to work collaboratively across complex project teams and interface between interdisciplinary departments and within an international team.</p><p>Fluent in English, Arabic is a plus</p><p>The position will be based in Basra (Iraq) on rotational basis (4 On/4 Off)</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span> <span></span></span><p>We are looking for the right people — people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world’s largest providers of products and services to the global energy industry.</p><br><b>Job Duties</b> <br><p>Under general autonomy and wide scope:</p><br> <ul> <li>The Well Engineering Manager functions as a technical Subject Matter Expert (SME), typically at the Country level staying abreast of current industry and PSL technological developments. 2</li> <li>This position is accountable for the implementation of Engineering processes with respect to quality and integrity assurance.</li> <li>Reviews and maintains HMS processes to ensure the management system remains up-to-date with industry best practices.</li> <li>Responsible for approval of Well Designs and/or Programs and ensures these are in compliance with contracts, as well as, the Company's HMS policies &amp; procedures.</li> <li>Ensures all Operational Activities are adequately evaluated and a full Risk Matrix table with Mitigation plans is completed.</li> <li>Responsible for resolving critical engineering/operational issues, identifying chronic problems and proposing solutions, ensuring optimum technical solutions for field project development, and compliance with all Project/Contract metrics.</li> <li>Coordinates engineering programs/procedures and practices among different Projects and/or Rigs.</li> <li>Supports development of new technology and champions the application and deployment of the same.</li> <li>Leads technical presentations to client.</li> <li>Provides work direction and mentorship on a regular basis to Engineers.</li> <li>Responsible for the training &amp; development of Well Engineers and their competency development.</li> <li>Operates with significant level of technical and/or operational independence in all assigned areas.</li> </ul> <p><strong>Additional Role Responsibilities:</strong></p><br> <p>(1) &nbsp; &nbsp;Ability and flexibility to travel to Iraq both domestically and internationally typically 28/28 days per business required.&nbsp;<br>(2) &nbsp; &nbsp;Provides <span>Managership</span> and guidance to both planning and operational teams. &nbsp;<br>(3) &nbsp; &nbsp;Demonstrates support of the management system&nbsp;<br>(4) &nbsp; &nbsp;Manages all well planning, design and engineering activities associated with drilling, completions and abandonment operations.&nbsp;<br>(5) &nbsp; &nbsp;Ensures the team properly consider design options, assess risks and validate costs and work closely with other Wells/technical teams, legislative bodes and service providers at various stages of the well planning process to ensure viability of proposals. &nbsp;<br>(6) &nbsp; &nbsp;Manages well operations to effectively control the risk, technical execution, cost control and ensures compliance with policies and procedures. &nbsp;<br>(7) &nbsp; &nbsp;Manages operational deviations from Company policy with suitable adherence to the risk assessment process.&nbsp;<br>(8) &nbsp; &nbsp;Manages platform rig engineering in the planning and execution of rig maintenance, rig modifications, recertification and upgrades.&nbsp;<br>(9) &nbsp; &nbsp;Ensures peer reviews, risk assessments, engineering/planning reviews, etc. are undertaken.&nbsp;<br>(10) &nbsp; &nbsp;Sets performance targets and implements performance measurement and improvement processes.&nbsp;<br>(11) &nbsp; &nbsp;Ensures that the lessons learned system is utilized to record lessons and used to transfer lessons into detail well planning to complete the full learning cycle.&nbsp;</p><br> <br><br><b>Qualifications</b> <br><p>Requires an undergraduate degree in STEM, preferably in Petroleum or Mechanical Engineering, and 12+ years experience as a Well Engineer with knowledge of drilling, completions, intervention operations and techniques. Demonstrated experience in leading or supervising an engineering team. Must have a Well Control certificate.</p><br> <p><br><strong>Preferred Experience:</strong><br>Minimum of 15-years relevant experience in their discipline or in an operations environment within the oil &amp; gas industry.&nbsp;</p><br><br><br><br><p><strong>Halliburton is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation</strong>.</p><br> <p><strong><u>Location</u></strong></p><br> <p>Oils Opertion ST,N°29 Burjesia,&nbsp;Basra,&nbsp;Basrah,&nbsp;61006, Iraq</p><br> <p><strong><u>Job Details</u></strong></p><br> <p><strong>Requisition Number:</strong>&nbsp;211594&nbsp;&nbsp;<br><strong>Experience Level:&nbsp;</strong>Experienced Hire&nbsp;<br><strong>Job Family:</strong>&nbsp;Engineering/Science/Technology&nbsp;<br><strong>Product Service Line:&nbsp;</strong>Halliburton Project Management&nbsp;&nbsp;&nbsp;<br><strong>Full Time / Part Time:&nbsp;</strong>Full Time</p><br> <p><strong>Additional Locations for this position:&nbsp;</strong></p><br> <p><u><strong>Compensation Information</strong></u><br>Compensation is competitive and commensurate with experience.</p><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview ***This position is physically located in Iraq*** Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. Under the supervision of the Carpenter Manager, the Carpenter Supervisor supervise a team which constructs, erects, installs, and repairs structures and fixtures of wood, plywood, and wallboard, using carpenter's hand tools and power tools, and conforming to building codes. Studies blueprints, sketches, or building plans for information pertaining to type of material required, such as lumber or fiberboard, and dimensions of structure or fixture to be fabricated. Responsibilities This position description is subject to change at any time as needed to meet the requirements of the program or company. + Supervise a team which constructs, erects, installs, and repairs structures and fixtures of wood, plywood, and wallboard, using carpenter's hand tools and power tools, and conforming to building codes. + Studies blueprints, sketches, or building plans for information pertaining to type of material required, such as lumber or fiberboard, and dimensions of structure or fixture to be fabricated. + Perform other duties as required Qualifications + Minimum Qualifications: Education/Certifications: One-year related experience may be substituted for one year of education, if degree is required. + Education: High school diploma or equivalent. Must provide a copy of the diploma. + Must be a U.S. Citizen + Must be able to obtain Host Country Passenger Vehicle license + Experience: + Minimum of 5 - 10 Years in the construction Industry, with at least 3 Years in Supervisory or Leadership role experience managing carpentry crews, coordinating with subcontractors, and overseeing material deliveries is essential. + Evidence of completion of trade school and/or a minimum of Four (4) years of apprenticeship training preferred. + Proven ability to handle Quality Control, Safety Compliance, and budget Management. + Skills: + Ability to supervise employees effectively, work under pressure, strict timelines and regulations + Analytical skills to be able to solve work-related problems. + Manual dexterity for installing material, and equipment, to meet specifications. + Must have proficient communication skills in English both written and oral. + Requires a collaborative work style, fostering cooperation, and teamwork. + Must exercise discretion and good sound judgment. + Must have basic computer skills. + Must have a thorough understanding of IBC Civil / Carpentry Standards + Supervisory Requirements: + Supervises a team of carpenters/construction workers. + Working Conditions: + Must be capable of working in an extreme weather conditions with temperatures exceeding 120 degrees Fahrenheit. + Indoor and/or outdoor environment with very adverse and harsh conditions (i.e., hot, dry, duty, desert environment with average temperatures of 30 degrees in the winter and 130 degrees in the summer months). + Includes some industrial production environment conditions as well. + Physical Requirements: + Medium work. Exerting up to 50 pounds of force occasionally, and/or up to 30 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects. + Work may require heavy lifting, stooping, climbing, prolonged standing, prolonged sitting, and working with or in areas where a potential could exist for exposure to physical, chemical, or biological agents. + Employee use of personal protective equipment (PPE) is required for some situations. PPE includes, but is not limited to, head, foot, torso, respiratory, vision, and hearing protective devices. + Must comply with all Fire and Safety Regulations and post policies. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>

<p>Section Head, Security Standards, Quality Assurance & Compliance (HoSQC) The post holder is responsible for the daily management of the Standards, Quality Assurance & Compliance (SQC) team, and supporting the Head of Security Operations Support (HoSOS). This is a key role and includes ensuring that all Security Business Unit Departments and Sections adhere to external regulations, laws, and internal policies; identifying and rectifying non-compliance issues through audits; ensuring that processes, products, and services consistently meet AvSec quality standards and preventing defects through systematic activities and continuous improvement. A solid knowledge of compliance, audit and quality assurance systems and processes is vital, along with the ability to forge relationships with other sub departments and when required, the airport directorate, agencies and external stakeholders. Key Areas of Responsibility: a) Leadership: Lead and manage the Standards, Quality Assurance and Compliance Section and its team of staff members. b) Security provision: To ensure the airport’s security operations meet international standards, comply with ICAO Annex 17, IATA security protocols, and ICAA regulations, while embedding quality assurance, and compliance oversight into all security functions. c) Security Standards Development: Define and maintain security operational standards across passenger screening, baggage handling, cargo security access control. Align security procedures with ICAO, IATA and ICAA requirements. Maintain the library of SEC documentation, and develop and update programs, Manuals, Plans and SOPs for security functions as required. d) Quality Assurance: Establish & manage a Security Quality Management System. Conduct audits, inspections and performance reviews of security checkpoints, K9 Units and surveillance systems. Monitor security service delivery against Key Point Indicators (KPIs) and international benchmarks. Implement corrective & preventative measures to address deficiencies. e) Compliance Oversight: Ensure compliance with aviation security regulations, including ICAO Annex 17 and national directives. Liaise with ICAA and international regulators during inspections and certifications. Maintain documentation and evidence for regulatory audits and certifications. Report compliance risks and mitigation strategies to the Security Headquarters. f) Risk & Incident Integration: Collaborate with the Airport Safety Management System (SMS) and utilize the Security Management System (SeMS) to integrate security compliance findings into risk assessments. Support incident investigations (e.g. security breaches, prohibited items, etc.) and embed lessons learned into revised standards. g) Training Awareness: Liaise with the Security Training Team and develop training modules on security standards, compliance and quality assurance for airport security staff. Promote a culture of vigilance, compliance and continuous improvement. Undertake training delivery in support of the Security Training Team, as required. h) SQC Reporting: Prepare structured reports with clear recommendations and highlight compliance risks with mitigation strategies.</p><p>Education: National Level 3 AvSec Manager or equivalent, Quality Assurance, Auditing or a related field, ISO 9001 Quality Management System Certification or equivalent, Managing Safely (IOSH) or equivalent, Possess an AvSec Training qualification. Experience: Applicant must have an aviation background in quality assurance, compliance & audit roles. Minimum of 2 years in an Aviation security management role with domestic and/or international experience. Experience of operating in post conflict, multicultural & low infrastructure environments. Minimum of 3 years working within an airport and/or other highly regulated, physical security-based establishment Computer Skills: Knowledgeable in Microsoft Office suit (user´s perspective) and able to manage other specific project/management software, provided the adequate training. Language Skills: Solid knowledge and command of written and spoken English. Arabic language skills are desirable. Training Requirements: Have experience in training delivery in an airport environment. Behavioral Competencies: • Excellent leadership and team management skills. • Driving Change and continuous improvement. • Strong communication and interpersonal abilities. • Decision-making and problem-solving aptitude under pressure. • Customer-focused with a commitment to service excellence. • Networking, collaborative approach and stakeholders’ engagement and negotiation. • Conflict resolution and negotiation skills. • Delivering Results & Fostering Ownership. • High level of integrity and ethical standards. Technical Competencies: • ICAO Aviation Safety & Security regulations & procedures. • Knowledge of Security Management System (SeMS) principles & practices. • Expertise in compliance monitoring, risk assessment and audit processes for security operations. • Data Analysis from audits, inspections, incident reports. • Audit techniques and use of audit software tools. • Expertise in developing, implementing & maintaining QMS in accordance with ISO 9001 standards. • Risk Management – identification of risks and developing strategies to mitigate those risks. • Strong communication and reporting skills. • Training design and delivery skill sets. • Standards Development.</p>

<p>The post holder is responsible for the daily management of the Standards, Quality Assurance & Compliance (SQC) team, and supporting the Head of Security Operations Support (HoSOS). This is a key role and includes ensuring that all Security Business Unit Departments and Sections adhere to external regulations, laws, and internal policies; identifying and rectifying non-compliance issues through audits; ensuring that processes, products, and services consistently meet AvSec quality standards and preventing defects through systematic activities and continuous improvement. A solid knowledge of compliance, audit and quality assurance systems and processes is vital, along with the ability to forge relationships with other sub departments and when required, the airport directorate, agencies and external stakeholders. Key Areas of Responsibility: a) Leadership: Lead and manage the Standards, Quality Assurance and Compliance Section and its team of staff members. b) Security provision: To ensure the airport’s security operations meet international standards, comply with ICAO Annex 17, IATA security protocols, and ICAA regulations, while embedding quality assurance, and compliance oversight into all security functions. c) Security Standards Development: Define and maintain security operational standards across passenger screening, baggage handling, cargo security access control. Align security procedures with ICAO, IATA and ICAA requirements. Maintain the library of SEC documentation, and develop and update programs, Manuals, Plans and SOPs for security functions as required. d) Quality Assurance: Establish & manage a Security Quality Management System. Conduct audits, inspections and performance reviews of security checkpoints, K9 Units and surveillance systems. Monitor security service delivery against Key Point Indicators (KPIs) and international benchmarks. Implement corrective & preventative measures to address deficiencies. e) Compliance Oversight: Ensure compliance with aviation security regulations, including ICAO Annex 17 and national directives. Liaise with ICAA and international regulators during inspections and certifications. Maintain documentation and evidence for regulatory audits and certifications. Report compliance risks and mitigation strategies to the Security Headquarters. f) Risk & Incident Integration: Collaborate with the Airport Safety Management System (SMS) and utilize the Security Management System (SeMS) to integrate security compliance findings into risk assessments. Support incident investigations (e.g. security breaches, prohibited items, etc.) and embed lessons learned into revised standards. g) Training Awareness: Liaise with the Security Training Team and develop training modules on security standards, compliance and quality assurance for airport security staff. Promote a culture of vigilance, compliance and continuous improvement. Undertake training delivery in support of the Security Training Team, as required. h) SQC Reporting: Prepare structured reports with clear recommendations and highlight compliance risks with mitigation strategies.</p><p>Education: National Level 3 AvSec Manager or equivalent, Quality Assurance, Auditing or a related field, ISO 9001 Quality Management System Certification or equivalent, Managing Safely (IOSH) or equivalent, Possess an AvSec Training qualification. Experience: Applicant must have an aviation background in quality assurance, compliance & audit roles. Minimum of 2 years in an Aviation security management role with domestic and/or international experience. Experience of operating in post conflict, multicultural & low infrastructure environments. Minimum of 3 years working within an airport and/or other highly regulated, physical security-based establishment Computer Skills: Knowledgeable in Microsoft Office suit (user´s perspective) and able to manage other specific project/management software, provided the adequate training. Language Skills: Solid knowledge and command of written and spoken English. Arabic language skills are desirable. Training Requirements: Have experience in training delivery in an airport environment. Behavioral Competencies: • Excellent leadership and team management skills. • Driving Change and continuous improvement. • Strong communication and interpersonal abilities. • Decision-making and problem-solving aptitude under pressure. • Customer-focused with a commitment to service excellence. • Networking, collaborative approach and stakeholders’ engagement and negotiation. • Conflict resolution and negotiation skills. • Delivering Results & Fostering Ownership. • High level of integrity and ethical standards. Technical Competencies: • ICAO Aviation Safety & Security regulations & procedures. • Knowledge of Security Management System (SeMS) principles & practices. • Expertise in compliance monitoring, risk assessment and audit processes for security operations. • Data Analysis from audits, inspections, incident reports. • Audit techniques and use of audit software tools. • Expertise in developing, implementing & maintaining QMS in accordance with ISO 9001 standards. • Risk Management – identification of risks and developing strategies to mitigate those risks. • Strong communication and reporting skills. • Training design and delivery skill sets. • Standards Development.</p>

<p><h4>Purpose and scope:</h4> <p>Supervise the maintenance cycle to ensure satisfactory completion of the program objectives.</p> <h4>Essential responsibilities:</h4> <ul> <li>Supervise all maintenance operations for assigned equipment in accordance with applicable PWS, company policies, OSHA, DOT, ANSI, ASME and applicable military regulations.</li> <li>Supervise shop foreman and mechanics to include vacation planning, discipline, conducting performance evaluations, and training.</li> <li>Establish job priorities and estimate down time.</li> <li>Coordinate workflow for downed equipment waiting for parts to minimize backlog of work and cost to customer division.</li> <li>Provide direct support to internal and external customers to ensure compliance, tracking efficiency, burn rates, equipment usage and maximizing cost avoidance measures.</li> <li>Supervise the recovery operations of MHE, VE, CE, heavy and light vehicle maintenance throughout assigned area of operation.</li> <li>Coordinate the proper administration, maintenance and distribution of approved publications, warranty documentation, and LDD and ECOD documentation.</li> <li>Provide input to management for forecasting and monitoring of the stock levels for required service and repair parts and petroleum.</li> <li>Responsible for the accurate and timely submission of all required plans and reports.</li> <li>Maintain effective lines of formal and informal communication amongst all levels of management and the customer as required.</li> <li>Coordinate collection and preparation of activity reports.</li> <li>Supervise and coordinate all maintenance activities required per the preventive maintenance program.</li> <li>Provide for and enforce guidelines to ensure the health, safety, and welfare of all assigned employees.</li> <li>Act as the point of contact for all maintenance issues in the absence of the Maintenance Manager.</li> <li>Monitor team development and ensure the execution of performance evaluations in accordance with DI policy.</li> <li>Conduct site visits to establish professional relationships with maintenance teams, site personnel, and the customer as needed.</li> <li>Perform all other position related duties as assigned or requested.</li> </ul> <h4>Minimum position knowledge, skills, and abilities required:</h4> <ul> <li>Associate's degree in an associated discipline.</li> <li>Two years of experience in related field can be substituted for each year of college.</li> <li>Six to eight years of logistics experience in a military or tactical environment.</li> <li>Prefer at least three years in a maintenance supervisor environment.</li> <li>Understanding of organizational maintenance and supply concepts and procedures.</li> <li>Understanding of maintenance production, production control and knowledge of U.S. Army maintenance support systems.</li> <li>Knowledge of MHE, heavy truck and/or heavy equipment.</li> <li>Knowledge of equipment parts acquisition, warranty, LDD, and ECOD submissions.</li> <li>Must possess knowledge of DOT, OSHA, ANSI, ASME, military regulations, standards and OEM requirements.</li> <li>Knowledge of diagnostics and ability to conduct technical research.</li> <li>Strong understanding of Department of Defense contracting policies and procedures.</li> <li>Outstanding problem solving skills and sound judgment.</li> <li>Excellent writing, communication, leadership and interpersonal skills.</li> <li>Demonstrative proficiency in Microsoft applications.</li> <li>Must be able to meet deployment status requirements.</li> </ul> <h4>Work environment, physical demands, and mental demands:</h4> <ul> <li>Ability to stand, sit, walk, stoop, squat, crouch, kneel, push and pull.</li> <li>Ability to lift and carry up to fifty pounds.</li> <li>Assist in lifting up to one hundred pounds.</li> <li>Able to work in both inside and outside conditions.</li> <li>Be exposed to dust, fumes and gases from running engines and motors.</li> <li>Living and working conditions at the assignment location could be remote and uncomfortable.</li> <li>Long hours, exposure to weather and hazardous conditions.</li> <li>Personnel should be aware of moving on short notice and under adverse conditions.</li> <li>Ability to travel domestically and internationally.</li> </ul> <h4>Other responsibilities:</h4> <ul> <li><strong>Safety:</strong> Enforce a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid and buddy aid responsibilities, participating in emergency response tasks and serving on safety committees and teams.</li> <li><strong>Quality:</strong> Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the Quality Policy and carry out job activities in compliance with applicable Quality System documents and customer contracts. Each employee must read and understand his or her Quality Management and Customer Satisfaction responsibilities.</li> <li><strong>Procedure compliance:</strong> Each employee must read, understand and implement the general and specific operational, safety, quality and environmental requirements of all plans, procedures and policies pertaining to his or her job.</li> </ul></p><p></p>

<p>Supervise the Maintenance cycle to ensure satisfactory completion of the program objectives.</p><p>Supervises all maintenance operations for assigned equipment in accordance with applicable PWS, Company policies, OSHA, DOT, ANSI, ASME and applicable military regulations.</p><p>Supervises shop foreman and mechanics to include vacation planning, discipline, conducting performance evaluations, and training.</p><p>Establishes job priorities and estimates down time.</p><p>Coordinates work flow for downed equipment waiting for parts to minimize backlog of work and cost to customer division.</p><p>Provides direct support to internal/external customers to ensure compliance, tracking efficiency, burn rates, equipment usage and maximizing cost avoidance measures.</p><p>Supervises the recovery operations of MHE, VE, CE, Heavy and Light vehicle maintenance throughout assigned area of operation.</p><p>Coordinates the proper administration, maintenance and distribution of approved publications, warranty documentation, and LDD and ECOD documentation.</p><p>Provides input to management for forecasting and monitoring of the stock levels for required service/repair parts and petroleum.</p><p>Responsible for the accurate and timely submission of all required plans and reports.</p><p>Maintains effective lines of formal and informal communication amongst all levels of management (and the customer) as required.</p><p>Coordinates collection and preparation of activity reports.</p><p>Supervise and coordinate all maintenance activities required per the preventive maintenance program.</p><p>Responsible to provide for and enforce guidelines to ensure the health, safety, and welfare of all assigned employees.</p><p>Acts as the POC for all maintenance issues in the absence of the Maintenance Manager.</p><p>Monitors team development and ensures the execution of performance evaluations in accordance with DI policy.</p><p>Conduct site visits to establish professional relationships with maintenance teams, site personnel, and the customer as needed.</p><p>Perform all other position related duties as assigned or requested.</p><p>Ability to stand, sit, walk, stoop, squat, crouch, kneel, push and pull</p><p>Ability to lift and carry up to fifty (50) pounds</p><p>Assist in lifting up to one hundred (100) pounds</p><p>Able to work in both inside and outside conditions</p><p>Be exposed to dust, fumes and gases from running engines and motors</p><p>Living and working conditions at the assignment location could be remote and uncomfortable</p><p>Long hours, exposure to weather and hazardous conditions</p><p>Personnel should be aware of moving on short notice and under adverse conditions</p><p>Ability to travel domestically and internationally</p><p>Amentum enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid/buddy aid responsibilities, participating in emergency response tasks and serving on safety committees and teams.</p><p>Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the Amentum Quality Policy and carry out job activities in compliance with applicable Amentum Quality System documents and customer contracts. Each employee must read and understand his/her Quality Management and Customer Satisfaction responsibilities.</p><p>Each employee must read, understand and implement the general and specific operational, safety, quality and environmental requirements of all plans, procedures and policies pertaining to his/her job.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Associate's degree in an associated discipline</li><li>Two (2) years of experience in related field can be substituted for each year of college</li><li>Six (6) to eight (8) years of logistics experience in a military/tactical environment</li><li>Prefer at least three (3) years in a maintenance supervisor environment</li><li>Understanding of organizational maintenance and supply concepts and procedures</li><li>Understanding of maintenance production, production control and knowledge of U.S Army maintenance support systems</li><li>Knowledge of MHE, heavy truck and or heavy equipment</li><li>Knowledge of equipment parts acquisition, warranty, LDD, and ECOD submissions</li><li>Must possess knowledge of DOT, OSHA, ANSI, ASME, Military regulations standards and OEM requirements</li><li>Knowledge of diagnostics and ability to conduct technical research</li><li>Strong understanding of Department of Defense contracting policies and procedures</li><li>Outstanding problem solving skills and sound judgment</li><li>Excellent writing, communication, leadership and interpersonal skills</li><li>Demonstrative proficiency in Microsoft application</li><li>Must be able to meet deployment status requirements</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Tasks and Responsibilities Provide first-line technical support for communications equipment across Control Risks Iraq operations.<br> Conduct fault finding, testing and basic diagnostics on Motorola handheld radios, Motorola vehicle-mounted radios, HF systems, UHF/VHF systems, TETRA radios, satellite phones, antennas, chargers, batteries and related accessories.<br> Assist with the installation, removal, inspection and testing of vehicle-mounted communications systems, including Motorola radios, HF/UHF equipment, antennas, speakers, microphones, power cables and mounting kits.<br> Support the installation, testing and troubleshooting of IVMS and vehicle tracking systems.<br> Conduct daily, weekly and monthly checks on communications equipment to confirm serviceability, battery condition, signal performance and operational readiness.<br> Maintain accurate electronic communications equipment records, including issue, return, inspection, fault reports, serial numbers and serviceability status.<br> Support project teams with communications-related issues, including radio checks, tracking device checks, signal issues and vehicle system faults.<br> Assist in programming, checking and preparing radios and communication equipment for project deployment, where authorised.<br> Ensure all communications and tracking equipment is correctly labelled, stored, charged, tested and ready for operational use.<br> Support the management of sensitive communications equipment in line with company procedures and local GoI/MoI requirements.<br> Liaise with suppliers, internal departments and project teams regarding communications equipment, repairs, installations and technical support.<br> Deputise for the Communications Manager when required, within agreed authority and capability.<br> Conduct any reasonable communications or technical equipment task requested by the Equipment management team.<br> Assist with project logistics support.<br> To include Preparation of mobilisation and de- mobilisation of projects Maintain accurate Logistics accounts across all commodity types.<br> Maintain accurate Logistics accounts across all commodity types Maintenance and delivery of equipment and materials, minimum stock levels, perform daily/weekly/monthly checks.<br> Competitive salary.<br> As an equal opportunities’ employer, we encourage suitably qualified applicants from a wide range of backgrounds to apply and join us and are fully committed to equal treatment, free from discrimination, of all candidates throughout our recruitment process.<br> Essential Good inter-personal skills and ability to liaise effectively with Iraqi agencies and suppliers.<br> Good English language, spoken and written.<br> IT literate, word, Excel.<br> Use of computer-based accounting systems.<br> Familiar with IVMS, tracking and Communication systems fitted to vehicles.<br> Familiar with vehicle electrical systems and comms integration.<br> Preferred Experience with software-based accounting systems.<br> Knowledge of Iraq Cultural norms &amp; business Etiquette.<br> Must maintain a neat and tidy appearance and be always presented well.<br> Qualifications and Specialist skills IT literate, word, Excel.<br> Use of computer-based accounting systems.<br> Familiar with IVMS, tracking and Communication systems fitted to vehicles Good English language, spoken and written.<br> Competencies Organised.<br> Flexible. Hardworking.<br> Ability to prioritise and multi-task.<br> Calm under pressure.<br> Proactive and able to take initiative.<br> Attention to detail</span> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview ***This position is physically located in Iraq*** Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. Responsible for providing hardware and software on-site and remote support, this position requires an experienced multi-discipline technologist capable of working independently and as part of a local and corporate team. Receives trouble reports for IT equipment and software via telephone, email, and service tickets. Assesses problem reports, performs corrective actions in accordance with enterprise work instructions, and delivers deskside support to internal customers, both in-person and via remote support tools. Baselines and deploys new equipment to users. Trains company personnel in technology solutions. Serves as a technical resource. Provides problem-solving support to computer users. Responsibilities This position description is subject to change at any time as needed to meet the requirements of the program or company. + Primary support and interface with site Information Management to ensure all Service Desk resources are utilized in the most efficient manner. + Assists customers with daily functions of computer, network, and software management for the site and all users. + Provides immediate response to all customers who come to the Service Desk. + Provides person to person interaction involves troubleshooting, information exchange and help with ticket submission and issues. + Provides telephone customer support for incoming and follow up calls used for initial troubleshooting. + Remedy call management software and other tools, to log and manage trouble tickets. + Must have the technical ability to accurately determine call routing for trouble tickets that cannot be resolved immediately at the Service Desk. + Creates logon and email accounts for customers as needed. + Manages Network Services with Server Manager, Print Queue Management + Works within a small continuous improvement focused team. + Tracks and documents work performed to allow accurate reporting of all Service Desk activities. + Completes all tasks and assignments as requested by Supervisors and Management. + Utilizes Windows account management tools to perform account administration, password changes, group changes, and account expiration date changes. + Performs other duties and assignments as required + Other Technical IT Duties as required. Qualifications + Minimum Qualifications: + Education/Certifications: One year related experience may be substituted for one year of education, if degree is required. Use the guide below to determine education and experience for this position. + Must be a U.S. Citizen + A valid driver’s license and the ability to obtain a U. S. Government Motor Vehicle Operator’s License and host nation Driver’s License, is required. + Experience: + Three years IT Service Desk Technician experience. + Certifications: + CompTIA A+, Microsoft 365 Certified: Modern Desktop Administrator Associate, CompTIA Network + + Skills: + Proficient in Microsoft Office 2010 or higher suite, data entry, copying, faxing, filing, assembling binders + Provides IT support for resolution of technical problems related to windows environments and windows applications, e-mail, database and security products. + Ability to isolate problem trends and troubleshoots recurring problems to find permanent solutions. + Ability to determine desktop and hardware related issues. + Excellent interpersonal skills. + Working Conditions: + Must be capable of working in an extreme weather conditions with temperatures exceeding 120 degrees Fahrenheit. + Indoor and/or outdoor environment with very adverse and harsh conditions (i.e., hot, dry, dusty, desert environment with average temperatures of 30 degrees in the winter and 130 degrees in the summer months). + Includes some industrial production environment conditions as well. + Physical Requirements: + Light work. Exerting up to 20 pounds of force occasionally, and/or up to 20 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects. + Work may require heavy lifting, stooping, climbing, prolonged standing, prolonged sitting, and working with or in areas where a potential could exist for exposure to physical, chemical, or biological agents. + Employee use of personal protective equipment (PPE) is required for some situations. PPE includes, but is not limited to, head, foot, torso, respiratory, vision, and hearing protective devices. + Must comply with all Fire and Safety Regulations and post policies. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>

<p><br></p> <h3>The role</h3> <p>This is an exciting opportunity for an experienced Construction Site Lead to join our Iraq Business Unit.</p> <h3>Our Clients and Projects</h3> <p>Designing the future. Transforming the world. Wood is an integral part of operations in Iraq, and we are continuing to grow our footprint across the country. With a 90-year heritage, 10 major contracts and over 850 employees, we have the skills, expertise and asset knowledge to support clients to deliver energy security and decarbonisation ambitions. Wood excels in supporting our clients to deliver complex upstream and midstream oil and gas projects in Iraq delivering maintenance, modifications and engineering solutions. We are committed to decarbonising existing assets, producing cleaner energy and developing a sustainable national workforce, ensuring the long-term growth of the region.</p> <h3>What we can offer</h3> <ul> <li>Meaningful and interesting projects Delivered to high profile clients and complex projects in Iraq</li> <li>Commitment to Diversity and Inclusion ; we are an organisation actively committed to diversity and inclusion across our business with employee networks committed to giving all employees a voice</li> <li>Competitive salary with regular salary reviews to ensure we are rewarding at the right level in line with the market</li> <li>Medical Insurance: Ensures inpatient and outpatient medical care is available should you require treatment.</li> <li>Commitment to continued professional development; development plans that are tailored to your individual needs and interests</li> <li>Global connections : join experts around the world who are at the leading edge of our industry, shaping the standards of our profession</li> <li>Long Service Award: Wood values the commitment and loyalty of our people. Celebrating Long Service provides an opportunity for the business to demonstrate their appreciation of the hard work, dedication and many years services of our employees at 5-year service milestones</li> </ul> <h3>Job Objectives:</h3> <p>The Senior Corrosion Engineer will support the delivery of corrosion and materials engineering activities as part of a broader asset integrity management programme for major oil and gas operating assets. The role will be responsible for undertaking corrosion assessments, supporting integrity studies, developing technical deliverables and providing engineering expertise to multidisciplinary teams involved in the operation and maintenance of oil and gas facilities. The successful candidate will work as part of Wood's Iraq team and contribute to the ongoing integrity, reliability and performance of critical production assets.</p> <p>Nationality Requirement: This position is open to Iraqi nationals only .</p> <h3>Core Responsibilities:</h3> <ul> <li>Accountability for a dedicated construction package, leading all phases from planning to execution while ensuring compliance with safety and quality standards.</li> <li>Collaborate with the Project Construction Coordinator to prepare, plan, organize, and execute safely construction activities.</li> <li>Assist in tracking project package progress, identifying and addressing any issues or delays, controlling construction budgets and schedules, quality control, and safety, and providing regular updates to the management.</li> <li>Support in managing and coordinating contractors, subcontractors, and vendors, ensuring adherence to project schedules and specifications, and ensuring timely availability of materials and resources.</li> <li>Anticipate, identify, and resolve construction issues and challenges, applying problem-solving skills to maintain project continuity and efficiency.</li> <li>Ensure all construction works are carried out as per the plans, schedule, specifications, and safety standards.</li> <li>Participate in coordination meetings with internal and external stakeholders when required.</li> <li>Prepare and draft meeting minutes on various topics discussed during projects meetings, ensuring accuracy, and capturing key points for reference and decision-making purposes.</li> <li>Develop and deliver presentations and reports on diverse subjects to communicate project progress, updates, construction feasibility and findings to both management and site personnel, assisting the project construction manager in conveying information effectively.</li> <li>Collaborate with cross-functional teams to gather information and insights, facilitating the preparation of comprehensive reports for management review and decision-making.</li> </ul><p><strong>Desired Candidate Profile</strong></p><p>Bachelor's degree in Engineering, Construction Management, or a related discipline.</p> <p>Minimum 10 to 15 years of experience in the Oil &amp; Gas industry, with significant exposure to construction projects.</p> <p>Strong knowledge of construction processes, techniques, and industry best practices within the Oil &amp; Gas sector.</p> <p>Proven ability to plan, organize, prioritize, and manage multiple activities and interfaces effectively.</p> <p>Excellent communication and interpersonal skills, with the ability to collaborate with a wide range of stakeholders.</p> <p>Strong analytical skills with the ability to review and interpret project plans, specifications, and engineering drawings.</p> <p>High attention to detail and commitment to quality and compliance requirements.</p> <p>Ability to work effectively as part of a multidisciplinary and cross-functional project team.</p> <p>Experience acting as an interface between different technical disciplines, departments, and international teams.</p> <p>Excellent command of the English language, both written and spoken.</p>

<p>The Disposal operator will be based at Amentum Baghdad Embassy Compound (BEC) in Baghdad, Iraq, and serve the Base Life Support Services contract in support of the State Department. This position will report to the Disposal Yard Manager.</p><p>DUTIES:</p><ul><li>Responsible for maintaining a safe workplace and ensuring that safety is the highest priority in the workplace.</li><li>Comply with all Environmental Health &amp; Safety and Quality Assurance requirements and goals.</li><li>Provide information and materials to these divisions as necessary to ensure adequate and legal documentation.</li><li>Ensures data accuracy and update of equipment inventory database.</li><li>Ensure that related data related to activities meet the requirements.</li><li>Process excess documentation for all controlled and non-controlled excess equipment and materials.</li><li>Review, reconcile, adjust and process all inventory transactions.</li><li>Process and coordinate Equipment Transfers.</li><li>Assist in a broad scope of direct and indirect support activities involving customer owned equipment as necessary to complete assigned tasks.</li><li>Conduct daily inspections of assigned equipment and immediately report defects or maintenance requirements.</li><li>Assist with scrap metal processing and preparation for disposal or recycling.</li><li>Assist in contingency waste removal operations during emergencies, special events, or increased operational requirements.</li><li>Perform additional duties and projects assigned.</li></ul><p>Physical Requirements</p><ul><li>Frequently lift and carry materials weighing up to 25 kg.</li><li>Stand, walk, bend, climb, kneel, and work for extended periods.</li><li>Operate manual and powered equipment safely.</li><li>Work in dusty, noisy, and outdoor environments.</li><li>Wear required PPE, including safety boots, gloves, eye protection, hearing protection, and reflective clothing.</li></ul><p>Working Conditions</p><ul><li>Outdoor and industrial work environment.</li><li>Exposure to heat, dust, noise, and moving equipment.</li><li>May be required to work overtime, weekends, holidays, or emergency callouts to support mission requirements.</li></ul><p>Performance Expectations</p><ul><li>Complete disposal operations safely, efficiently, and on schedule.</li><li>Maintain high standards of cleanliness throughout assigned work areas.</li><li>Ensure waste is properly segregated and disposed of in accordance with environmental requirements.</li><li>Demonstrate reliability, professionalism, accountability, and teamwork while supporting mission operations.</li></ul><p>DESIRED:</p><ul><li>Previous out of home country experience and previous work experience in harsh environmental conditions are a plus.</li><li>Experience supporting Department of State.</li><li>Experience working with Amentum.</li></ul><p>OTHER KNOWLEDGE, SKILLS AND ABILITIES:</p><ul><li>Knowledge of the principles and processes involved in Quality Control Management.</li><li>Successful management of multiple sites in geographically dispersed locations.</li><li>Ability to collect, analyze and summarize data and to prepare clear and concise reports.</li><li>Experience in effectively dealing with international and headquarters staff, and sensitivity to other cultures.</li><li>Exercise sound judgment and make decisions independently.</li><li>Excellent organizational and time management skills, with the ability to handle multiple tasks and administrative details in a fast paced and constantly changing environment. Expert communication skills to facilitate and disseminate information.</li></ul><p><br></p><p><strong>Desired Candidate Profile</strong></p><ul><li>Minimum 4 or more years experience handling waste management and disposal activity.</li><li>Previous experience in waste management, sanitation, logistics, construction support, or material handling preferred.</li><li>Ability to operate or learn Disposal collection equipment and material handling equipment.</li><li>Ability to communicate effectively with supervisors and team members.</li><li>Prior proven experience in Property Disposal operations with Defense Reutilization</li><li>Experience operating heavy equipment to include up to a 30K Forklift, Extended reach Forklift, Material Handler, Grappler (Excavator), Front End Loader and Material Shredders.</li><li>Experience with cutting torches to include Plasma cutters.</li><li>Commitment to maintaining a high-performance team which delivers customer service excellence.</li><li>Knowledge of principles and processes involved in supporting contract responsibilities at an overseas facility.</li><li>Ability to work in a fast-paced environment requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules.</li><li>Cross-cultural sensitivity with an international perspective.</li><li>Excellent organizational and time management skills.</li><li>Computer skills, specifically in Microsoft Word and Excel.</li><li>Ability to become an active and functioning member of a team.</li><li>Ability to be innovative and be an agent for change.</li><li>Ability to prioritize multiple tasks in a fast-paced operational environment.</li><li>Basic recordkeeping and reporting skills.</li><li>A high school diploma or GED (General Education Diploma) Certifications or 4 years substitute experience in waste management and disposal services will be acceptable.</li><li>Valid Iraqi driver s license (if operating company vehicles).</li><li>Security Vetting: Already possess a RSO issued security clearance or be able to obtain a favorable RSO issued clearance prior to being hired is required for the position. Must maintain eligibility at the required certification or clearance level for the duration of the contract.</li><li>Language Skills: Satisfactory English and Arabic proficiency to meet job requirements and to adhere and comply with safety, health, and security measures.</li><li>Medical: Successfully complete and pass the medical and drug examinations as required by Amentum and our customer for deployment to Iraq. Must maintain physical and drug requirements for duration of deployment.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>IT HCS &amp; VMware Platform Supervisor (Basra)<br><br><br><p><b>"Belong, Connect, Grow, with KBR!</b></p><br><br><br><p><b>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</b></p><br><br><p><b>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets."</b></p><br><br><br><p><b>Position title: </b>IT HCS &amp; VMware Platform Supervisor</p><br><br><p><b>Position status: </b>Local</p><br><br><p><b>Position reports to: </b>IT DC Manager</p><br><br><p><b>Department: </b>IT</p><br><br><p><b>Rotation pattern: </b>14/14</p><br><br><br><p>Job purpose</p><br><br><br><ul><li>The IT HCS &amp; VMware Platform Supervisor is responsible for supervising the operation, administration, governance, and continuous improvement of the Huawei Cloud Stack (HCS) platform and related private or hybrid cloud services across the IT data center environment.</li><li>The role leads HCS platform support activities to ensure secure, available, scalable, and recoverable cloud services, while coordinating with infrastructure, network, security, application, vendor, and service management teams to meet business continuity and operational requirements.</li></ul><br><br><p>Duties and responsibilities</p><br><br><br><ul><li>Supervise daily administration of Huawei Cloud Stack services including ManageOne, FusionCompute, resource pools, projects or tenants, compute, storage, virtual networking, identity and access, monitoring, and platform health.</li><li>Lead and guide platform engineers and support teams in incident handling, service requests, change implementation, preventive maintenance, lifecycle upgrades, and compliance with approved procedures.</li><li>Monitor HCS capacity, utilization, performance, availability, licensing, quotas, and service levels; prepare forecasts and implement optimization plans for efficient resource usage.</li><li>Oversee integration of HCS with VMware platforms, enterprise storage, SAN or NAS connectivity, backup systems, Active Directory, DNS, networking, security, monitoring, and IT service management tools.</li><li>Ensure backup, replication, snapshot, restore, and disaster recovery processes are properly configured and tested; coordinate recovery exercises against approved RPO and RTO targets.</li><li>Review and approve technical change plans, method statements, risk assessments, rollback plans, patching activities, configuration baselines, and security hardening requirements.</li><li>Troubleshoot and supervise resolution of complex platform incidents by analyzing logs, alerts, performance data, and root causes; coordinate corrective actions with Huawei, vendors, and internal teams.</li><li>Maintain platform documentation, architecture diagrams, runbooks, SOPs, asset records, KPI reports, and continuous improvement actions; promote automation using PowerShell, PowerCLI, Python, APIs, or approved orchestration tools.</li></ul><br><p>Qualifications, Training &amp; Certifications</p><br><br><ul><li></li><li>Bachelor’s degree in Computer Engineering, Computer Science, Information Technology, Network Engineering, or a related discipline.</li><li>At least one current professional certification in cloud computing, virtualization, systems infrastructure, storage, backup, or IT service management is required.</li><li>Huawei HCIP-Cloud Computing, HCIP-Cloud Service, or equivalent Huawei Cloud Stack professional certification is strongly preferred; HCIE-Cloud Computing is an advantage.</li><li>Huawei Cloud Stack administration, ManageOne, FusionCompute, FusionStorage, or HCS operations training is strongly preferred.</li><li>VMware Certified Professional - VCF Administrator, VVF Administrator, or Data Center Virtualization certification is preferred.</li><li>Microsoft Certified: Azure Administrator Associate (AZ-104) or Azure Solutions Architect Expert (AZ-305 path) is an advantage for hybrid cloud responsibilities.</li><li>Cisco Certified Network Associate (CCNA) or equivalent networking certification is preferred.</li><li>ITIL Foundation (current version) is preferred; service management, change management, or project coordination training is an advantage.</li><li>Veeam Certified Engineer Plus (VMCE+) or an equivalent enterprise backup and recovery certification is an advantage.</li><li>Strong knowledge of HCS operations, virtualization, storage, backup, disaster recovery, Windows and Linux systems, networking, security, monitoring, and automation scripting.</li><li>Strong leadership, professional communication, analytical troubleshooting, technical reporting, architecture documentation, and stakeholder coordination skills.</li></ul><br><p>Experience</p><br><br><ul><li>7-10 years of professional experience in cloud, virtualization, systems, data center, or enterprise infrastructure operations.</li><li>Minimum 4-6 years of hands-on experience with Huawei Cloud Stack, ManageOne, FusionCompute, VMware, enterprise storage, backup, replication, and disaster recovery operations, including at least 2-3 years in a lead or supervisory role.</li></ul><p>Language proficiency, computer and software skills</p><br><br><br><ul><li>Core platforms and tools:</li></ul><ul><li>Huawei Cloud Stack, ManageOne, FusionCompute, FusionStorage, and HCS monitoring tools</li><li>VMware vSphere, vCenter, ESXi, VCF or VVF, templates, clusters, HA and DRS</li><li>SAN/NAS storage, backup and replication tools, PowerShell, PowerCLI, Python, APIs, monitoring platforms, and ITSM ticketing tools</li></ul><ul><li>English - upper intermediate or above (verbal and written)</li></ul><br><p>Skills</p><br><br><br><ul><li>Strong leadership and supervisory capability across HCS platform operations, incident response, change delivery, vendor coordination, and team workload management.</li><li>Advanced troubleshooting across HCS, virtualization, storage, backup, networking, security, and infrastructure services, with strong availability and risk awareness.</li><li>Ability to manage incidents, problems, changes, risks, capacity, lifecycle activities, audit findings, and service improvement plans within agreed service levels.</li><li>Strong documentation, reporting, automation, governance, and communication skills with readiness to support critical incidents, migrations, upgrades, and recovery activities.</li></ul><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Data Centre - System team lead<br><br><p><b>Job Description: Data Centre - System Team Lead</b></p><br><br><p><b>Role Title: </b>System Team Lead</p><br><br><p><b>Function: </b>Information Management / IT</p><br><br><p><b>Role Leve: </b>Technical Team Lead</p><br><br><p><b>Location: </b>Majnoon Project – Site Basra</p><br><br><p><b>Primary Purpose: </b>Lead systems support, stability, security, upgrades, troubleshooting and documentation</p><br><br><p><b>Reporting: </b>Data Centre Manager</p><br><br>Preface<p>This job description outlines the purpose, responsibilities, competencies, experience, certifications, technical skills, and language requirements for the System Team Lead role. The role is designed for a technically experienced leader who can guide system administrators and engineers while maintaining reliable, secure, and efficient IT services.</p><br><br>Professional Summary<p>The System Team Lead leads and mentors system administrators and engineers, ensuring that IT systems remain stable, secure, efficient, and aligned with operational requirements. The role oversees system upgrades, troubleshooting, technical support, documentation, and best-practice adoption. It requires strong hands-on technical capability combined with leadership, planning, communication, and stakeholder coordination skills.</p><br><br>Core Competencies<ul><li>Team leadership, mentoring, coaching, and development of system administrators and engineers.</li><li>Strong technical problem-solving and ability to manage complex troubleshooting activities.</li><li>Operational discipline focused on stability, security, availability, and efficiency of IT systems.</li><li>Ability to plan, coordinate, and oversee system upgrades, patching, and continuous improvement activities.</li><li>Strong documentation discipline, including procedures, standards, runbooks, and knowledge sharing.</li><li>Clear communication with technical teams, business users, vendors, and management stakeholders.</li><li>Ability to prioritise technical work across incidents, maintenance, projects, and operational support.</li></ul>Professional Experience<ul><li>Extensive experience in systems administration, infrastructure support, or IT engineering roles.</li><li>Experience leading or mentoring system administrators, engineers, or technical support resources.</li><li>Proven experience supporting enterprise IT systems in operational or project-based environments.</li><li>Experience overseeing system upgrades, troubleshooting, incident resolution, and root-cause analysis.</li><li>Experience developing best practices, technical documentation, procedures, and operational standards.</li><li>Experience working with internal IT teams, vendors, and wider project stakeholders to maintain service continuity.</li></ul><br>Key Responsibilities<br><p><b>Lead and Mentor</b></p><br><br><p>Lead, guide, and mentor system administrators and engineers, supporting team capability, work allocation, and technical discipline.</p><br><br><p><b>Maintain Stability</b></p><br><br><p>Ensure IT systems remain stable, secure, efficient, and available to support business and project operations.</p><br><br><p><b>Oversee Upgrades</b></p><br><br><p>Coordinate system upgrades, patching, maintenance activities, and technical changes in line with operational needs.</p><br><br><p><b>Troubleshoot Issues</b></p><br><br><p>Oversee complex troubleshooting, escalation management, root-cause analysis, and incident resolution.</p><br><br><p><b>Drive Best Practice</b></p><br><br><p>Develop, maintain, and promote best practices, technical standards, runbooks, and operational documentation.</p><br><br><p><b>Support Governance</b></p><br><br><p>Contribute to IT governance, reporting, risk reduction, service improvement, and stakeholder communication.</p><br><br>Certifications<p>Relevant professional certifications are preferred where aligned to the organisation, technology stack, and project requirements. Examples include:</p><br><br><ul><li>Microsoft, Linux, VMware, Cisco, cloud, cyber security, or infrastructure-related certifications.</li><li>ITIL Foundation or equivalent service management certification.</li><li>Security-related certification such as CompTIA Security+, Microsoft Security, or equivalent is advantageous.</li></ul>Technical Skills<p><b>Systems Administration</b></p><br><br><p>Windows Server, Linux, core infrastructure services, patching, backup, monitoring, and support.</p><br><br><p><b>Infrastructure Operations</b></p><br><br><p>Virtualization, storage, compute, network services, hosting environments, and operational resilience.</p><br><br><p><b>Security and Controls</b></p><br><br><p>Secure configuration, access control, vulnerability remediation, endpoint protection, and compliance support.</p><br><br><p><b>Troubleshooting</b></p><br><br><p>Incident response, escalation support, root-cause analysis, performance investigation, and service restoration.</p><br><br><p><b>Upgrades and Maintenance</b></p><br><br><p>System upgrades, patch cycles, lifecycle planning, maintenance windows, and technical change coordination.</p><br><br><p><b>Documentation</b></p><br><br><p>Runbooks, SOPs, standards, technical guides, change records, and knowledge-base material.</p><br><br>Languages<ul><li>English language proficiency required for technical documentation, reporting, stakeholder communication, and operational coordination.</li><li>Arabic</li></ul><br><br><br> </div>

<p><h4>Duties</h4> <p>Provide information and materials to these divisions as necessary to ensure adequate and legal documentation.<br> Ensure Property Department compliance with Property Management and Control Procedures.<br> Conduct random compliance audits on all sites/departments in Iraq.<br> Develop and execute corrective action plans for audit deficiencies and inventory accountable property.<br> Mentor lower-level Property Staff and custodians in proper process and procedures as they relate to Government Property.<br> Identify problem areas and recommend viable solutions.<br> Perform physical inventories of Government Furnished Property (GFP) and Contractor Acquired Property (CAP), as directed by the Property Management and Control Procedures and/or the Logistics and Property Manager.<br> Ensure Government Property Identification numbers (GP) are properly assigned, prepare required schedule, and assist with identifying lost, damaged, and destroyed property as well as excessive consumption.<br> Work closely with Property Custodians to ensure overall accountability of assets.<br> Track and record movement of all types of Government property. This includes movement from one point to another within a contractor’s facility, movement between facilities for any purpose, and protection during movement.<br> Conduct country-wide property training on a yearly basis as well as establish training plans for new hire employees and refresher training.<br> Ensure compliance with Federal Acquisition Regulation (FAR), Statement of Work (SOW), and Standard Operating Procedures (SOP).<br> Develop processes and desktop procedures to maintain continuity of job performance.<br> Audit logs and status records to ensure completion of lost, damaged, or destroyed items.<br> Check LTDD packages for accuracy and completion.<br> Perform additional duties and projects as qualified to perform as assigned.<br> Responsible for maintaining a safe workplace and ensuring that safety is the highest priority in the workplace.<br> Comply with all Environmental Health & Safety and Quality Assurance requirements and goals.</p> <h4>Required</h4> <p><strong>Minimum acceptable experience level:</strong> Five years’ experience with overseas Government contracts. Department of State contracts strongly preferred.</p> <p><strong>Knowledge, skills, and abilities:</strong></p> <ul> <li>Knowledge of FAR and industry leading practices regarding government property.</li> <li>Ability to clearly and concisely articulate services/requirements in writing.</li> <li>Ability to articulate in a clear and concise manner with Management and Trades Departments daily.</li> <li>Ability to demonstrate analytical and researching skills.</li> <li>Ability to perform the technical requirements efficiently and effectively.</li> <li>Ability to define problems, collect data, and propose solutions.</li> <li>Ability to read, interpret, and follow all Logistic Management procedures, policies, and guidelines.</li> <li>Ability to effectively present information and respond to questions.</li> <li>Excellent organizational and time management skills, with ability to prioritize effectively and work with a sense of urgency.</li> <li>Ability to lift materials and equipment weighing up to 50 lbs.</li> <li>Ability to work in a fast-paced environment that requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules.</li> <li>Understanding how inventory affects compensation.</li> <li>Knowledge of principles and processes involved in supporting contract responsibilities at an overseas facility.</li> <li>Cross-cultural sensitivity with an international perspective.</li> <li>Computer skills, specifically in Microsoft Word and Excel.</li> <li>Ability to become an active and functioning member of a team.</li> <li>Ability to be innovative and be an agent for change.</li> <li>Expert communication skills to facilitate and disseminate information.</li> </ul> <p><strong>Education:</strong><br> An undergraduate degree is preferred but can be replaced with additional years of Government Property Administration.</p> <p><strong>Licenses and certifications:</strong><br> Valid driver’s license from home of record.<br> NPMA Certification or ability to obtain within one year.</p> <p><strong>Security vetting:</strong><br> Possessing a Moderate Risk Public Trust (MPRT) or be able to obtain a favorable MPRT certification prior to being hired is required.</p> <p><strong>Language skills:</strong><br> Sufficient English proficiency to meet job requirements and to adhere and comply with safety, health, and security measures.</p> <p><strong>Medical:</strong><br> Successfully complete and pass the medical and dental examinations as required for deployment to Iraq. Must maintain physical and dental requirements for duration of deployment.</p> <h4>Desired</h4> <ul> <li>Previous out of home country experience and previous work experience in harsh environmental conditions are a plus.</li> <li>Experience working with Amentum.</li> </ul> <h4>Other responsibilities</h4> <p><strong>Safety</strong> - Enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. Each employee is responsible for completing all training requirements and fulfilling all self-aid/buddy aid responsibilities, participating in emergency response tasks, and serving on safety committees and teams as appropriate.</p> <p><strong>Quality</strong> - Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the Quality Policy and carry out job activities in compliance with applicable Quality System documents and customer contracts. Each employee must read and understand his/her Quality Management and Customer Satisfaction responsibilities.</p> <p><strong>Procedure compliance</strong> - Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to the job.</p> <h4>Working and living conditions</h4> <p>This position may be in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environment. Temperatures can reach 120-130 degrees Fahrenheit (50-55 degrees Celsius) during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to Iraq for extended periods. Work schedules are a minimum of six days per week and 10 hours per day, while some jobs have higher daily and weekly minimums. Employees must be willing and able to perform physical activities including, but not limited to, heavy lifting and moving of items, parts, assemblies, and equipment up to the safety regulation maximum; climbing in and out of equipment; crawling; and working outdoors. This includes being able to lift and carry 40 pounds of personal protective equipment for extended periods of time and being capable of running and ‘duck & cover’ during emergencies without putting oneself or others at risk.</p></p><p></p>