وظائف مساعد مدير مطعم - البصره العراق

<p><h4>Division</h4> <p>CSSP (Ratawi Hub – Iraq)</p> <p><strong>Direction:</strong> IM</p> <p><strong>Situation in organization</strong><br> Within the Project Organization, the Lead Interface Engineer reports to the Interface Manager.</p> <p><strong>Job location(s):</strong> CPP Office (Abu Dhabi, UAE) during detailed engineering phase / site (Iraq) during construction phase.</p> <h4>Job dimensions</h4> <p>The Lead Interface Engineer shall assist the Interface Manager on the following:</p> <ul> <li>Take care of the overall management of interface and data changes between stakeholders of the Common Seawater Supply Project, and provide advice on any schedule and commercial issues arising from such interfaces and changes.</li> <li>Ensure that interface management procedures are in place and that EPC and other contractors implement the required interface management system throughout the project duration.</li> </ul> <p>The Lead Interface Engineer is anticipated to start early 2026 and will be based in Abu Dhabi (UAE).</p> <h4>Activities</h4> <p>The job holder shall assist the Interfaces Manager:</p> <ul> <li>With the support of the Project Management Consultant, define, implement and maintain the methodology/procedure to be applied and the corresponding database to be created, to ensure a clear and accurate identification and management of interfaces. This procedure will be as efficient and simple as possible and will be used throughout the life of the project and shall be applied by the different entities/contractors.</li> <li>Management of interface and change data between parties, monitor and control interface and change issues, in order to resolve interface and change issues in a timely and organised manner according to the project interface and change control procedures.</li> <li>Attend major interface meetings, internal and external with other entities of CSSP Project, contractor representatives, vendors, TotalEnergies specialists, partner’s experts, etc. Lead interface and other technical meetings as required.</li> <li>Ensure that HSE requirements are systematically considered all along the interface management process and in particular that interfaces are properly addressed during HAZID/HAZOP/PTR project audits.</li> <li>Consolidate and advise the Project Director and Technical and Project Control Managers of any risks, especially schedule and commercial issues arising from interfaces and changes. Shall be the coordinator of the Management of Change, providing the justification through all disciplines of the change. Ensure complete documentation of all changes, and communication of these in compliance with the processes agreed with BOC and regulatory authorities.</li> <li>Prepare technical papers to support management positions for clarifications or decisions with regulatory authorities of host countries, other entities or partners.</li> <li>Ensure that EPC Contractor implements required interface management system and resources and monitor throughout the project duration that EPC Contractor honours its responsibilities as defined in the project interface procedure.</li> <li>Ensure the implementation of interface changes/optimisations resulting from negotiations of the external interfaces.</li> <li>Together with Project Management Consultant, ensure design consistency and continuity throughout the facilities.</li> <li>Avoid change orders and delays caused by interface issues; ensure timely follow-up of interface issues.</li> <li>Assist the Project Management Consultant, prior to and during construction phase, by anticipating operational interfaces with other parties (clashes or conflicting program).</li> <li>In case of SIMOPS (phased delivery of the plant): propose solutions and participate in definition and resolution.</li> </ul> <h4>Context and environment</h4> <p>Basrah Oil Company (BOC) is undertaking the Seawater Treatment Facilities (STF) project to provide treated seawater to the oil fields in southern Iraq (for injection). The STF will be located on the west side of the Khor Al Zubair, upstream of the port of Umm Qasr and will have the following key components:</p> <ul> <li>Site development and non-process facilities.</li> <li>Ancillaries and buildings.</li> <li>Seawater intake and outfall structures.</li> <li>Material off-loading facility.</li> <li>Seawater clarification, filtration and deoxygenating processes.</li> <li>Chemical addition systems.</li> <li>Shipping pumps.</li> <li>Power generation.</li> <li>Utilities.</li> </ul> <p>FEED was completed (June 2016) with Phase 1 capacity of 7.5 million barrels of water per day (MMBWPD) of treated seawater, with a subsequent Phase 2 of 5 MMBWPD for a total buildout capacity of 12.5 MMBWPD. The project was placed on hold upon the completion of FEED.</p> <p>In 2018 BOC launched a call for tender on the FEED, but instructed bidders to reduce capacity to 5.0 MMBWPD, with provision for a future addition of 2.5 MMBWPD for a total build-out phase of 7.5 MMBWPD.</p> <h4>Accountabilities</h4> <p>Accountable for the interfaces and management of change (MoC), being internal (between units, disciplines, PMT, One Tech and specialists) or external (between other CSSP projects, contractors, company, etc.). The job holder coordinates all interface and MoC matters, protecting the WI Project and company’s position with regards to all external interfaces and to internal interfaces between contractors, and ensuring that changes are evaluated and executed for the overall benefit of the project.</p> <p>Accordingly, the job holder shall make the necessary coordination between all involved contractors/parties and company teams and implement an agreed interface management procedure and methodology. He/she shall ensure the proper and timely follow-up and resolution of interface issues between the various involved parties documents. He/she must support the Interface Manager to ensure full control of the Management of Change process, and shall document all the changes, taking care to perform a full review with various disciplines with project aspects to justify or reject the change.</p> <p>A key aspect of interface coordination is the ability to effectively communicate, across all involved parties, all details related to an interface, including requirements, technical specifications, and potential issues. It is important that the communication channel is promptly established, the proper information is exchanged, and all involved parties acknowledge that they fully understand the interface requirements.</p> <p>The nature of the development might call for a “staged” delivery of the facilities. Simultaneous activities between construction activities and operations activities can occur to meet the agreed schedule.</p> <h4>Qualification</h4> <ul> <li>Degree in engineering.</li> </ul> <h4>Experience</h4> <ul> <li>15 years of relevant experience in industrial projects.</li> <li>A sound multi-discipline technical background complemented by a sound knowledge on onshore surveys campaigns and civil works experience.</li> <li>Very good communication and interpersonal skills and capacity to work in a “transverse” organisation.</li> <li>Mastering English is a must, knowledge of French and Arabic is a plus.</li> </ul></p><p></p>

<p><h4>Division</h4> <p>CSSP (Ratawi Hub – Iraq)</p> <p><strong>Direction:</strong> IM</p> <p><strong>Situation in organization</strong><br> Within the Project Organization, the Lead Interface Engineer reports to the Interface Manager.</p> <p><strong>Job location(s):</strong> CPP Office (Abu Dhabi, UAE) during detailed engineering phase / site (Iraq) during construction phase.</p> <h4>Job dimensions</h4> <p>The Lead Interface Engineer shall assist the Interface Manager on the following:</p> <ul> <li>Take care of the overall management of interface and data changes between stakeholders of the Common Seawater Supply Project, and provide advice on any schedule and commercial issues arising from such interfaces and changes.</li> <li>Ensure that interface management procedures are in place and that EPC and other contractors implement the required interface management system throughout the project duration.</li> </ul> <p>The Lead Interface Engineer is anticipated to start early 2026 and will be based in Abu Dhabi (UAE).</p> <h4>Activities</h4> <p>The job holder shall assist the Interfaces Manager:</p> <ul> <li>With the support of the Project Management Consultant, define, implement and maintain the methodology/procedure to be applied and the corresponding database to be created, to ensure a clear and accurate identification and management of interfaces. This procedure will be as efficient and simple as possible and will be used throughout the life of the project and shall be applied by the different entities/contractors.</li> <li>Management of interface and change data between parties, monitor and control interface and change issues, in order to resolve interface and change issues in a timely and organised manner according to the project interface and change control procedures.</li> <li>Attend major interface meetings, internal and external with other entities of CSSP Project, contractor representatives, vendors, TotalEnergies specialists, partner’s experts, etc. Lead interface and other technical meetings as required.</li> <li>Ensure that HSE requirements are systematically considered all along the interface management process and in particular that interfaces are properly addressed during HAZID/HAZOP/PTR project audits.</li> <li>Consolidate and advise the Project Director and Technical and Project Control Managers of any risks, especially schedule and commercial issues arising from interfaces and changes. Shall be the coordinator of the Management of Change, providing the justification through all disciplines of the change. Ensure complete documentation of all changes, and communication of these in compliance with the processes agreed with BOC and regulatory authorities.</li> <li>Prepare technical papers to support management positions for clarifications or decisions with regulatory authorities of host countries, other entities or partners.</li> <li>Ensure that EPC Contractor implements required interface management system and resources and monitor throughout the project duration that EPC Contractor honours its responsibilities as defined in the project interface procedure.</li> <li>Ensure the implementation of interface changes/optimisations resulting from negotiations of the external interfaces.</li> <li>Together with Project Management Consultant, ensure design consistency and continuity throughout the facilities.</li> <li>Avoid change orders and delays caused by interface issues; ensure timely follow-up of interface issues.</li> <li>Assist the Project Management Consultant, prior to and during construction phase, by anticipating operational interfaces with other parties (clashes or conflicting program).</li> <li>In case of SIMOPS (phased delivery of the plant): propose solutions and participate in definition and resolution.</li> </ul> <h4>Context and environment</h4> <p>Basrah Oil Company (BOC) is undertaking the Seawater Treatment Facilities (STF) project to provide treated seawater to the oil fields in southern Iraq (for injection). The STF will be located on the west side of the Khor Al Zubair, upstream of the port of Umm Qasr and will have the following key components:</p> <ul> <li>Site development and non-process facilities.</li> <li>Ancillaries and buildings.</li> <li>Seawater intake and outfall structures.</li> <li>Material off-loading facility.</li> <li>Seawater clarification, filtration and deoxygenating processes.</li> <li>Chemical addition systems.</li> <li>Shipping pumps.</li> <li>Power generation.</li> <li>Utilities.</li> </ul> <p>FEED was completed (June 2016) with Phase 1 capacity of 7.5 million barrels of water per day (MMBWPD) of treated seawater, with a subsequent Phase 2 of 5 MMBWPD for a total buildout capacity of 12.5 MMBWPD. The project was placed on hold upon the completion of FEED.</p> <p>In 2018 BOC launched a call for tender on the FEED, but instructed bidders to reduce capacity to 5.0 MMBWPD, with provision for a future addition of 2.5 MMBWPD for a total build-out phase of 7.5 MMBWPD.</p> <h4>Accountabilities</h4> <p>Accountable for the interfaces and management of change (MoC), being internal (between units, disciplines, PMT, One Tech and specialists) or external (between other CSSP projects, contractors, company, etc.). The job holder coordinates all interface and MoC matters, protecting the WI Project and company’s position with regards to all external interfaces and to internal interfaces between contractors, and ensuring that changes are evaluated and executed for the overall benefit of the project.</p> <p>Accordingly, the job holder shall make the necessary coordination between all involved contractors/parties and company teams and implement an agreed interface management procedure and methodology. He/she shall ensure the proper and timely follow-up and resolution of interface issues between the various involved parties documents. He/she must support the Interface Manager to ensure full control of the Management of Change process, and shall document all the changes, taking care to perform a full review with various disciplines with project aspects to justify or reject the change.</p> <p>A key aspect of interface coordination is the ability to effectively communicate, across all involved parties, all details related to an interface, including requirements, technical specifications, and potential issues. It is important that the communication channel is promptly established, the proper information is exchanged, and all involved parties acknowledge that they fully understand the interface requirements.</p> <p>The nature of the development might call for a “staged” delivery of the facilities. Simultaneous activities between construction activities and operations activities can occur to meet the agreed schedule.</p> <h4>Qualification</h4> <ul> <li>Degree in engineering.</li> </ul> <h4>Experience</h4> <ul> <li>15 years of relevant experience in industrial projects.</li> <li>A sound multi-discipline technical background complemented by a sound knowledge on onshore surveys campaigns and civil works experience.</li> <li>Very good communication and interpersonal skills and capacity to work in a “transverse” organisation.</li> <li>Mastering English is a must, knowledge of French and Arabic is a plus.</li> </ul></p><p></p>

<p><strong>Job Title: Construction Manager – Marine Offshore Piling Project (Iraq)</strong><br></p><p><strong>Location:</strong> Iraq (12 month Project Assignment)<br><strong>Relocation:</strong> Must be willing and ready to relocate immediately<br></p><p><strong>Job Description:</strong></p><p>We are seeking an experienced <strong>Construction Manager</strong> for a Marine Tubular Piling Project in Basrah, Iraq. The ideal candidate should have extensive experience managing marine and offshore construction projects, including tubular piling, jetties, quay walls, marine foundations, and port infrastructure.<br></p><p><strong>Key Responsibilities:</strong></p><ul><li><p>Lead and manage all site construction activities</p></li><li><p>Plan, coordinate, and supervise marine tubular piling operations</p></li><li><p>Ensure safe, timely, and high-quality project execution</p></li><li><p>Coordinate with clients, consultants, and subcontractors</p></li><li><p>Monitor project schedules, manpower, equipment, and resources</p></li><li><p>Resolve construction challenges while ensuring compliance with project specifications and HSSE requirements</p></li><li><p>Prepare progress reports and oversee project delivery through completion</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor's Degree in Civil Engineering or a related field</p></li><li><p>15–20 years of experience in marine/offshore construction projects</p></li><li><p>Mandatory experience in marine tubular piling projects</p></li><li><p>Strong leadership, planning, and site management skills</p></li><li><p>Gulf/International project experience preferred</p></li><li><p>Must be willing to relocate to Basrah, Iraq</p></li></ul>

<p>Madarek Engineering Group is seeking a highly experienced and technically strong Senior Electrical Project Manager with a solid EPC background and a proven track record in managing large-scale, technically complex projects. The successful candidate will take full ownership of the electrical scope from engineering and procurement through construction, testing &amp; commissioning, and final handover, with responsibility for programme, cost, quality, resources, and overall project delivery. Key Responsibilities Lead the complete electrical scope from engineering and procurement through construction, testing &amp; commissioning, and handover. Take ownership of project planning, scheduling, resource allocation, cost control, progress, and overall project performance. Develop, maintain, and control project programmes using Primavera P6, including baselines, critical path, resource planning, look-ahead schedules, progress updates, delay analysis, and recovery programmes. Provide technical leadership for MV/LV distribution, transformers, generators, UPS, ATS, switchgear, power distribution, lighting, ELV systems, earthing, and lightning protection. Coordinate electrical interfaces with mechanical, architectural, civil, ICT/ELV, and specialist systems, resolving technical issues before they affect execution. Manage the engineering-to-procurement interface, including BOQs, specifications, technical evaluations, material submittals, vendors, suppliers, and subcontractors. Monitor long-lead equipment through technical approval, manufacturing, delivery, installation, and commissioning. Lead site execution, subcontractors, resources, quality, inspections, and multidisciplinary coordination. Lead testing &amp; commissioning, system integration, snagging, and final handover. Coordinate directly with clients, consultants, vendors, subcontractors, and internal project teams. Identify technical, programme, procurement, contractual, and execution risks early and implement practical corrective and recovery measures.</p><p><strong>Desired Candidate Profile</strong></p><p>Requirements Bachelor's Degree in Electrical Engineering. Minimum 15 years of relevant experience, including at least 5 years as a Project Manager or Senior Project Manager on major projects. Proven experience in large-scale EPC, MEP, hospitality, commercial, industrial, or infrastructure projects. Proven track record of managing projects end-to-end, from engineering and procurement through execution, testing &amp; commissioning, and handover. Excellent hands-on technical knowledge of electrical power and building systems. Advanced hands-on proficiency in Primavera P6, including baseline development, critical path analysis, resource planning, progress monitoring, delay analysis, and recovery planning. Solid experience in project planning, cost control, procurement, subcontract management, construction methodology, and project sequencing. Proven leadership of multidisciplinary teams, specialist subcontractors, and major equipment packages, with strong decision-making, negotiation, and problem-solving skills. Good understanding of contracts, variations, delays, project reporting, and claims-related documentation. Excellent command of English. Preferred Qualifications PMP or equivalent certification, with practical application of PMI methodologies. Previous project experience in the GCC. What We Offer Competitive package including accommodation, flights, and residency support.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Electrical &amp; Instrumentation (E&amp;I) Engineer will be based on-site in Basra, Iraq, and will be responsible for supervising and executing electrical and instrumentation installation works for an EPC oil &amp; gas construction project. The role ensures that all site activities are performed safely, in compliance with approved drawings, project specifications, international standards, and HSE requirements.</p><p><br></p><p>The E&amp;I Engineer will coordinate closely with construction, QA/QC, engineering, commissioning teams, and subcontractors to ensure proper installation, testing, pre-commissioning, and timely project delivery while maintaining quality, safety, and schedule objectives throughout the project lifecycle.</p><p><br></p><ul><li><p>Supervise and execute all electrical installation activities including MV/LV systems, transformers, switchgear, MCCs, distribution panels, UPS systems, and associated power infrastructure in accordance with approved drawings and project specifications.<br></p></li><li><p>Monitor and control cable tray installation, cable pulling, glanding, termination, and testing activities, ensuring compliance with method statements, ITPs, and international standards.<br></p></li><li><p>Ensure proper installation of earthing and grounding systems, lightning protection systems, and hazardous area electrical equipment (Ex-rated equipment) as per project and safety requirements.<br></p></li><li><p>Supervise installation of field instrumentation including pressure, temperature, flow, and level transmitters, control valves, analyzers, junction boxes, and marshalling cabinets.</p></li></ul><br><ul><li><p>Oversee instrument tubing works, impulse line installation, supports, tagging, and identification to ensure alignment with engineering drawings and hook-up details.<br></p></li><li><p>Support loop checking, calibration, pre-commissioning, and commissioning activities in coordination with the commissioning team and client representatives.</p><br></li><li><p>Review and interpret technical documents including single line diagrams (SLDs), wiring diagrams, hook-up drawings, cable schedules, and layout drawings to ensure accurate site execution.</p></li></ul><br><ul><li><p>Coordinate with construction, QA/QC, engineering, and subcontractor teams to resolve technical issues and ensure smooth workflow and timely project execution.</p></li></ul><br><ul><li><p>Ensure all installation works are performed in compliance with project specifications, international standards (IEC, NEC, API where applicable), and contractual requirements.</p></li></ul><br><ul><li><p>Participate in inspections, raise RFIs where required, support punch list clearance, and ensure proper documentation and as-built records are maintained.</p></li></ul><br><ul><li><p>Enforce strict adherence to HSE policies, conduct risk assessments, participate in toolbox talks, and ensure safe execution of works within live plant or hazardous areas.</p></li></ul><br><ul><li><p>Monitor daily site progress, report to the Construction Manager /Project Manager, and ensure activities are completed within approved schedules and cost parameters</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor's degree in Electrical Engineering, or a related field</p></li><li><p>Experience working on oil and gas EPC projects</p></li><li><p>Strong understanding of oil and gas process systems and equipment, with a focus on flare gas recovery systems.</p></li><li><p>7-10 years experience in static, rotary equipment installation.</p></li><li><p>Knowledge of piping and general mechanical works.</p></li></ul><p></p></section>

<h3>Job Duties</h3>Under general supervision: From Surface Facilities IAM Project Manager or Project/Asset Manager, supervises the operations on the field projects for a given project or several projects in an asset. Establishes scope of work with site customer and site representative. Checks design documentation for adequacy to specific site conditions and agreed scope of work. Proposes engineering adjustments to site condition as required. Visits site before and during the project and verifies that applied project procedures by contractor will allow compliance of technical requirements and timely completion. Additional responsibilities include verifying project advance payment and contractor resource allocation; commenting and proposing adjustments to comply with project schedule and budget; verifying safety conditions at site and stop work if required; informing management and personnel of unsafe practice. Also participates in site project meetings with contractor and customer, and coordinates site inspection by QA/QC, HSE and commissioning teams in a timely matter. Prepares periodic reports for upper management. Additional Role Responsibilities: (1). Supervises the activities of assigned personnel at BIN-UMAR &amp;SINDBAD Stations well site. Performs supervisory duties at the level established by management for the position; (2). Supervises all activities under the Company Health, Safety and Environment (HSE) policies and procedures are fully implemented and adhered to, so that Loss Prevention is maximized; (3). Drive innovative solutions to operating issues, ensure accurate measurement and optimize operations; (4). Prepare, maintain, and execute terminal operating and capital budgets, establish and monitor key performance indicators; (5). Set priorities, assign projects, monitor progress and set standards for a high performing team; (6). Organization and Cooperate with maintenance team do the PM/CM and troubleshooting jobs; (7). Monitor and operate the SAP/CMMS system. (8). Contribute and participate in successful completion of plant improvements; (9). Performs E.R.T. responsibilities as stipulated in Loss Control Procedures and acts as an emergency response team Manager in case of emergency. (10). Control, minimize and monitor flare losses &amp; waste generation. (11). Coordinates with Royal commission and other outside party for flare losses &amp; waste management. (12). Identify team and individuals limitations and develop contingency plans to address any short fall. <p>Requisition Number: PHONE_NUMBER Experience Level: Experienced Hire Job Family: Operations Product Service Line: Halliburton Project Management Full Time / Part Time: Full Time Additional Locations for this position: Compensation Information Compensation is competitive and commensurate with experience. Apply Now</p><p><strong>Desired Candidate Profile</strong></p><h3>Qualifications</h3>Requires undergraduate degree in Engineering or similar discipline, and preferably a minimum of five (5) years of progressive experience in planning, design and construction of surface facilities for oil fields. Relevent experience is highliy desirable: Minimum of 10-15 years relevant experience in their discipline or in an operations environment within the oil &amp; gas industry. Recognized International Qualifications (NVQ, C&amp;G, OPITO etc) Valid Emergency Response competence CMMS/SAP Experience Coaching &amp; Development Experience (Competence Assessors preferred) Commissioning experience Experience from similar challenging environments. (Wells experience a must for production operations personnel) Valid trade competencies (Complex, Flange Management, ESR's, Small bore tubing etc.) Internationally recognized driving license Good English skills, Arabic speaking advantageous ISSOW/PTW experience

<p><h4>Position purpose</h4> <p>The civil construction lead is responsible for leading and coordinating civil construction activities across assigned projects and work fronts, ensuring safe, compliant and efficient execution in accordance with approved drawings, specifications, project requirements, schedule, quality standards and HSE requirements. The role provides day-to-day leadership to civil construction supervisors and contractors and acts as the primary civil construction focal point reporting to the construction manager.</p> <h4>Key accountabilities / responsibilities</h4> <ul> <li>Lead and coordinate civil construction activities across assigned projects and work fronts.</li> <li>Report directly to the construction manager on construction progress, priorities, constraints, risks and required actions.</li> <li>Provide leadership and technical direction to civil construction supervisors and contractor construction teams.</li> <li>Ensure construction activities are executed safely and in accordance with the approved permit to work (PTW) system, risk assessments, method statements and project HSE requirements.</li> <li>Promote zero harm principles and actively demonstrate courage to care, including intervention where unsafe acts or conditions are identified.</li> <li>Ensure contractors are fully prepared before mobilization, including approved drawings, materials, equipment, manpower, permits, work packs and access requirements.</li> <li>Coordinate civil works including earthworks, roads, drainage, foundations, concrete works, structural works, underground services, buildings and associated infrastructure.</li> <li>Review construction work packs, method statements, risk assessments and constructability requirements prior to execution.</li> <li>Monitor contractor performance, productivity and physical progress against the approved construction schedule.</li> <li>Identify construction constraints, interfaces and potential delays and coordinate their timely resolution.</li> <li>Coordinate closely with engineering, HSE, QA/QC, planning, operations, commissioning and other disciplines.</li> <li>Ensure construction activities comply with approved IFC drawings, specifications, applicable codes and project quality requirements.</li> <li>Raise and coordinate technical queries where site conditions, constructability issues or design conflicts are identified.</li> <li>Participate in site inspections, safety audits, quality inspections, construction reviews and coordination meetings.</li> <li>Ensure accurate reporting of physical progress and provide construction input to look-ahead schedules and progress reports.</li> <li>Coordinate interfaces between multiple contractors and disciplines, particularly where work is undertaken within or adjacent to operational facilities.</li> <li>Support system completion, punch-list closeout, mechanical completion, handover and commissioning activities.</li> <li>Ensure appropriate site records and construction documentation are maintained.</li> <li>Support the construction manager in establishing priorities, allocating resources and managing contractor performance.</li> <li>Mentor and develop local construction personnel and promote effective teamwork across the construction organization.</li> </ul> <h4>Education</h4> <ul> <li>Bachelor's degree in civil engineering from a recognized university.</li> <li>Relevant construction, HSE or project management certifications are advantageous.</li> </ul> <h4>Experience & competencies</h4> <ul> <li>Minimum 15 years of relevant construction experience, preferably within oil & gas, energy, industrial or major infrastructure projects.</li> <li>Significant experience in civil construction and site execution, including supervision and management of contractors.</li> <li>Strong experience working within multidisciplinary EPC/EPCM project environments.</li> <li>Demonstrated experience leading civil supervisors and coordinating multiple construction work fronts.</li> <li>Strong understanding of civil construction methods, drawings, specifications, QA/QC requirements and international construction practices.</li> <li>Good understanding of PTW systems, risk assessment and construction activities within operational facilities.</li> <li>Strong leadership, communication, coordination and problem-solving skills.</li> <li>Ability to manage priorities and resolve construction interfaces and site constraints.</li> <li>Good written and spoken English.</li> <li>Preference will be given to qualified local candidates from Basra with relevant oil & gas construction experience.</li> </ul></p><p></p>

<p><h4>Position information</h4> <p><strong>Department:</strong> Information Technology / Cybersecurity<br> <strong>Reports to:</strong> Cybersecurity Manager<br> <strong>Direct reports:</strong> <br> <strong>Location:</strong> [Location]<br> <strong>Employment type:</strong> Full-time</p> <h4>Position purpose</h4> <p>The Head of Cybersecurity is responsible for leading the day-to-day cybersecurity function, managing cybersecurity operations, and overseeing the implementation of security controls across the organisation's Information Technology (IT) and Operational Technology (OT) environments. The role provides technical leadership to a small cybersecurity team and ensures cybersecurity risks are effectively identified, assessed, monitored, and mitigated.</p> <p>Working under the direction of the Cybersecurity Manager, the Head of Cybersecurity is accountable for the execution of the cybersecurity strategy, governance requirements, security operations, compliance activities, and cybersecurity improvement initiatives.</p> <h4>Key responsibilities</h4> <p><strong>Cybersecurity leadership</strong></p> <ul> <li>Lead and manage the cybersecurity team, providing technical guidance, mentoring, and performance management.</li> <li>Coordinate cybersecurity activities across IT, OT, Digital, and business functions.</li> <li>Act as the primary escalation point for cybersecurity operational issues.</li> <li>Develop team capabilities, skills, and professional development plans.</li> <li>Foster a strong cybersecurity culture throughout the organization.</li> </ul> <p><strong>Security operations</strong></p> <ul> <li>Oversee Security Operations Centre (SOC) activities, whether internally delivered or outsourced.</li> <li>Monitor security alerts, incidents, vulnerabilities, and threats.</li> <li>Ensure effective incident detection, triage, investigation, containment, and recovery.</li> <li>Lead cyber incident response activities and coordinate post-incident reviews.</li> <li>Ensure cybersecurity monitoring and logging capabilities are maintained and optimized.</li> </ul> <p><strong>Governance, risk and compliance</strong></p> <ul> <li>Support the implementation and maintenance of the cybersecurity governance framework.</li> <li>Manage cybersecurity risk assessments and risk treatment activities.</li> <li>Maintain the cybersecurity risk register and track remediation actions.</li> <li>Ensure compliance with applicable cybersecurity standards, regulatory requirements, and corporate policies.</li> <li>Support internal and external cybersecurity audits.</li> </ul> <p><strong>Security architecture and controls</strong></p> <ul> <li>Ensure security controls are implemented and maintained across infrastructure, endpoints, cloud services, applications, and OT environments.</li> <li>Review and approve security designs for new projects and technology implementations.</li> <li>Support secure network segmentation and defense-in-depth strategies.</li> <li>Oversee vulnerability management and remediation programs.</li> </ul> <p><strong>Identity and access management</strong></p> <ul> <li>Ensure privileged access management and identity governance controls are implemented and monitored.</li> <li>Oversee periodic access reviews and segregation of duties assessments.</li> <li>Support implementation of role-based access control (RBAC) frameworks.</li> <li>Ensure compliance with least-privilege principles and account management standards.</li> </ul> <p><strong>Vulnerability management</strong></p> <ul> <li>Direct vulnerability assessment and scanning activities.</li> <li>Prioritize remediation activities based on business risk.</li> <li>Monitor closure of identified vulnerabilities.</li> <li>Provide reporting on remediation status and risk exposure.</li> </ul> <p><strong>Third-party security</strong></p> <ul> <li>Assess cybersecurity risks associated with suppliers and vendors.</li> <li>Participate in vendor security reviews and due diligence assessments.</li> <li>Ensure cybersecurity requirements are incorporated into contracts and procurement processes.</li> </ul> <p><strong>Business continuity and resilience</strong></p> <ul> <li>Support disaster recovery and business continuity planning.</li> <li>Participate in cyber resilience exercises and simulations.</li> <li>Ensure cybersecurity recovery requirements are incorporated into continuity plans.</li> </ul> <p><strong>Security awareness</strong></p> <ul> <li>Develop and maintain cybersecurity awareness and training programs.</li> <li>Promote security best practices across all levels of the organization.</li> <li>Coordinate phishing simulation and awareness campaigns.</li> </ul> <p><strong>Reporting and performance management</strong></p> <ul> <li>Prepare cybersecurity dashboards and reports for management.</li> <li>Provide regular updates to the Cybersecurity Manager on security posture, incidents, risks, and initiatives.</li> <li>Track cybersecurity KPIs and KRIs.</li> <li>Monitor progress against the cybersecurity roadmap.</li> </ul> <h4>Key deliverables</h4> <ul> <li>Cybersecurity risk register</li> <li>Security incident reports</li> <li>Vulnerability management reports</li> <li>Compliance and audit reports</li> <li>Cybersecurity KPI/KRI dashboard</li> <li>Security awareness program</li> <li>Security standards and procedures</li> <li>Incident response plans</li> <li>Privileged access reviews</li> <li>Third-party security assessments</li> <li>Cybersecurity roadmap progress reporting</li> </ul> <h4>Required qualifications</h4> <p><strong>Essential</strong></p> <ul> <li>Bachelor's degree in Cybersecurity, Information Technology, Computer Science, Engineering, or related discipline.</li> <li>Minimum 8-10 years of cybersecurity experience.</li> <li>Minimum 3-5 years of cybersecurity leadership or management experience.</li> <li>Experience across security operations, risk management, governance, and security architecture.</li> <li>Experience managing third-party cybersecurity service providers.</li> </ul> <p><strong>Preferred certifications</strong></p> <ul> <li>CISSP</li> <li>CISM</li> <li>CRISC</li> <li>GSEC</li> <li>GIAC certifications</li> <li>ISO 27001 Lead Implementer or Lead Auditor</li> <li>IEC 62443 Cybersecurity certifications</li> <li>Microsoft Security certifications</li> <li>CCSP</li> </ul> <h4>Knowledge and experience</h4> <p><strong>Technical knowledge</strong></p> <ul> <li>Security operations and incident response</li> <li>SIEM and security monitoring platforms</li> <li>Endpoint detection and response (EDR/XDR)</li> <li>Microsoft security technologies</li> <li>Identity and access management</li> <li>Privileged access management</li> <li>Vulnerability management</li> <li>Cloud security (Azure/AWS)</li> <li>Network security</li> <li>OT/ICS cybersecurity</li> <li>Security architecture principles</li> </ul> <p><strong>Governance knowledge</strong></p> <ul> <li>NIST Cybersecurity Framework</li> <li>NIST SP 800-53</li> <li>NIST Incident Response Framework</li> <li>IEC 62443</li> <li>ISO 27001</li> <li>CIS Critical Security Controls</li> <li>Risk management frameworks</li> </ul> <h4>Key competencies</h4> <ul> <li>Leadership and team management</li> <li>Strategic thinking</li> <li>Risk-based decision making</li> <li>Communication and stakeholder management</li> <li>Incident management</li> <li>Problem solving</li> <li>Vendor management</li> <li>Project management</li> <li>Analytical thinking</li> <li>Report writing and executive presentation skills</li> </ul> <h4>Authority levels</h4> <p>The Head of Cybersecurity is authorized to:</p> <ul> <li>Direct cybersecurity operational activities.</li> <li>Lead cybersecurity incident response activities.</li> <li>Escalate significant cyber risks to the Cybersecurity Manager.</li> <li>Recommend security control implementations.</li> <li>Initiate emergency security containment actions during cybersecurity incidents.</li> <li>Review and approve cybersecurity operational standards and procedures.</li> </ul> <h4>Key performance indicators (KPIs)</h4> <ul> <li>Mean time to detect (MTTD)</li> <li>Mean time to respond (MTTR)</li> <li>Vulnerability remediation compliance rate</li> <li>Security awareness completion rate</li> <li>Audit finding closure rate</li> <li>Privileged access review completion rate</li> <li>Security incident reduction trends</li> <li>Cybersecurity roadmap delivery performance</li> <li>Third-party security assessment completion rate</li> <li>Compliance with security standards and policies</li> </ul></p><p></p>

<p><h4>Job description</h4> <p><strong>Job title:</strong> FM manager (Facilities manager)<br> <strong>Company:</strong> KBR-Iraq<br> <strong>Location:</strong> Basra, Iraq<br> <strong>Employment type:</strong> Full-time, contract<br> <strong>Rotation:</strong> Back to back role - 28/28<br> <strong>Required:</strong> Expats - Iraq experience</p> <h4>About company</h4> <p>Belong, connect, grow, with KBR! The KBR team delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals. KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Job purpose</h4> <p>Oversee and coordinate all facilities-related functions for the camp operations in Basra, ensuring safe, reliable, and cost-effective support services. Lead cross-functional teams in camp operations, catering, transportation planning, and facilities maintenance to deliver high-quality services that meet project requirements and client expectations.</p> <h4>Key responsibilities</h4> <ul> <li>Lead and manage daily operations of camp facilities, including housing, dining/catering, transportation services, security infrastructure, utilities, and maintenance programs.</li> <li>Develop and implement preventative maintenance plans and safety protocols to maintain a safe, compliant, and efficient camp environment.</li> <li>Plan, schedule, and optimize staffing, rosters, and workloads for camp operations, catering, transportation, and facilities maintenance teams.</li> <li>Manage vendor relationships and contractor performance for facilities services, ensuring adherence to scope, budget, and timeline.</li> <li>Monitor and control facility budgets, forecast resource needs, and drive cost-saving initiatives without compromising quality.</li> <li>Ensure compliance with local regulations, health and safety standards, and project-specific security requirements.</li> <li>Coordinate with site leadership, procurement, and logistics to align facilities services with project milestones and client expectations.</li> <li>Prepare and present regular reports on facilities performance, maintenance status, incidents, and improvement plans.</li> <li>Lead continuous improvement efforts, implementing best practices in camp operations and facilities management.</li> <li>Respond to emergencies and oversee crisis management and contingency planning as required.</li> </ul> <h4>Qualifications</h4> <p><strong>Education:</strong> Bachelor’s degree in a relevant field.<br> <strong>Experience:</strong> Minimum 15 years of experience in managing teams across camp operations, catering, transportation planning, and facilities maintenance.<br> Strong leadership and team-building skills with a proven track record of delivering large-scale facilities services in challenging environments.<br> Demonstrated ability to develop budgets, manage contracts, and optimize operations under tight deadlines.</p> <h4>Technical/functional skills</h4> <ul> <li>Strong knowledge of facilities management, maintenance planning, and operations for camp settings.</li> <li>Experience with catering operations and dietary accommodation in large camps.</li> <li>Transportation planning and fleet management fundamentals.</li> <li>Risk assessment, safety management, and emergency response planning.</li> <li>Budgeting, cost control, and vendor/contract management.</li> <li>Familiarity with applicable Iraqi regulations and project-specific compliance requirements is a plus.</li> <li>Proficiency in relevant software/tools for facilities management, maintenance scheduling, and reporting.</li> </ul> <h4>Desired attributes</h4> <ul> <li>Strong leadership and people-management skills.</li> <li>Excellent communication and collaboration across multidisciplinary teams.</li> <li>Problem-solving mindset with a proactive approach to maintenance and reliability.</li> <li>Ability to work under pressure, manage multiple priorities, and adapt to changing project needs.</li> <li>Cultural sensitivity and adaptability to the local work environment.</li> </ul> <h4>Location and about Basra site</h4> <p>Onsite role based in Basra, Iraq. The camp manager should be prepared to work in a dynamic, multi-national industrial setting with adherence to KBR-Majnoon project safety and security standards.</p></p><p></p>

<p><h4>Job description</h4> <p><strong>Job title:</strong> Construction supervisor - mechanical & piping</p> <p><strong>Company:</strong> KBR</p> <p><strong>Location:</strong> Basra Iraq</p> <p><strong>Employment type:</strong> Full-time, contract</p> <p><strong>Rotation:</strong> 28/28</p> <p><strong>Required nationals:</strong> Local national</p> <h4>About company</h4> <p>Belong, connect, grow, with KBR! The KBR team delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</p> <p>KBR sustainable technology solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Roles and responsibilities</h4> <p>Specific responsibilities of the construction supervisor include:</p> <p><strong>Overall view of the role:</strong></p> <ul> <li>Contributes to construction safety by reducing site exposure through modularization, standardization, and maximizing off-plot construction.</li> <li>Contributes to developing brownfield/greenfield construction strategies and planning initiatives for project opportunities pre-FID.</li> <li>Focuses on addressing and removing hurdles to efficient construction and actively monitors productivity on site, advising (as per the instruction) from the construction lead and the construction manager on ways to improve the productivity metrics.</li> <li>Identifies and monitors brownfield/greenfield construction planning initiatives for approved projects post-FID.</li> <li>Coordinates with engineering, QA/QC, and HSE teams to ensure compliance.</li> <li>Works with the construction mechanical and piping lead and the construction manager to effectively execute construction deliverables for the project.</li> <li>Ability to effectively work on more than one project at a time and identify and resolve site issues efficiently.</li> <li>Experience in reading and understanding construction drawings (ISOs, GAD, and P&ID).</li> <li>Experience in reading and understanding LOSH, test packs, hydrotesting, flushing, and all pre-commissioning requirements.</li> <li>Coordinates with the contractor/subcontractor's day-to-day mechanical and piping construction activities at site, assembly, torquing, installation, reinstatement, and final completion of the subsystem, both brownfield and greenfield projects.</li> <li>Experience in rotating equipment construction activities including but not limited to the installation, managing the quality of the executed work, and alignment requirements till the mechanical completion stage.</li> <li>Wide experience in static mechanical construction activities, including but not limited to piping fabrication, good knowledge of preparing piping MTOs, weld maps, and sufficient experience for the piping quality requirements (NDT, PWHT, etc.).</li> <li>Strong experience in shutdown requirements, including but not limited to tie-ins and hook-up spools.</li> </ul> <h4>Accountabilities/expectations</h4> <ul> <li>Coordinate with all the team members, follow up daily with the construction lead he will be assigned to and the construction manager.</li> <li>Ensure that the project planning is deliverable from engineering and that contracts & procurement aligns with the construction and handover sequences.</li> <li>Ensure designs optimally use cold work, modularization, and off-plot construction to minimize on-site HSSE exposure.</li> <li>Ensure to follow the final/approved design during construction.</li> <li>Good knowledge of international standards (ASME, API, etc.).</li> <li>Strong understanding of safety/HSE regulations, procedures, and PTW system.</li> </ul> <h4>Education, skills & experience</h4> <p>BSc., university degree in mechanical engineering.</p> <p><strong>Experience and skillset:</strong></p> <ul> <li>Minimum 10-12 years’ construction experience in oil and gas-related projects with strong proof for piping and rotating roles.</li> <li>Strong leadership and teambuilding skills; supervisory experience.</li> <li>Experience in static and rotating equipment installation and alignment.</li> <li>Strong software skills including Microsoft Office, document websites, 3D module review, and preferably good knowledge of software design (AutoCAD).</li> <li>Strong level in English language to communicate properly with the team members and all stakeholders.</li> </ul></p><p></p>

<p><h4>About the company<\/h4>\n<p>\"Belong, connect, grow, with KBR!\"<\/p>\n<p>The KBR team delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.<\/p>\n<p>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.<\/p>\n<p>KBR is operating the Integrated Field Management Services (IFMS) contract at Majnoon Oil Field under the Basrah Oil Company (BOC), delivering comprehensive field support services in one of Iraq's most significant oil-producing regions.<\/p>\n\n<h4>Job purpose<\/h4>\n<p>The badge administrator is responsible for operating field access IT systems at Majnoon Oil Field, including data entry in Arabic and English, issuing field access badges, producing reports, and managing field access documentation to support security operations and business continuity for KBR and Basrah Oil Company (BOC).<\/p>\n\n<h4>Job responsibilities<\/h4>\n<ul>\n <li>Input and maintain data for all field staff and vehicle badges in the access management system (bilingual: Arabic and English).<\/li>\n <li>React promptly to badge deactivation requests received from the BOC Security Manager and DS1 Security Manager.<\/li>\n <li>Review and verify all badge applications for completeness and compliance prior to processing.<\/li>\n <li>Collect and record biometric data for all field personnel prior to badge issuance.<\/li>\n <li>Update badge access permissions in line with directions issued by the DS1 Security Manager.<\/li>\n <li>Identify and report any system faults or technical issues affecting the access control infrastructure.<\/li>\n <li>Maintain and update the HOT (Head of Turn) arrivals register on an ongoing basis.<\/li>\n <li>Generate reports upon request for security, operations, and management stakeholders.<\/li>\n <li>Ensure accurate and timely records of all field vehicle badge data.<\/li>\n <li>Support security team with documentation for field access control and business continuity activities.<\/li>\n<\/ul>\n\n<h4>Technical qualifications & skills<\/h4>\n\n<p><strong>Education<\/strong><\/p>\n<p>Bachelor's degree or vocational diploma in a relevant discipline.<\/p>\n\n<p><strong>Experience<\/strong><\/p>\n<ul>\n <li>Relevant work experience within the oil and gas industry, preferably in a security or access management role.<\/li>\n <li>Competent in basic document translation between Arabic and English.<\/li>\n <li>Good understanding of data protection requirements and confidentiality obligations.<\/li>\n <li>Demonstrated ability to work effectively in a multinational environment with strong cultural awareness.<\/li>\n <li>Good professional work ethic and timekeeping.<\/li>\n<\/ul>\n\n<p><strong>Computer & software skills<\/strong><\/p>\n<ul>\n <li>Intermediate proficiency in Microsoft Office Suite (Word, Excel, PowerPoint, Outlook).<\/li>\n <li>Capability to operate field access \/ badge management IT systems.<\/li>\n<\/ul>\n\n<p><strong>Language proficiency<\/strong><\/p>\n<ul>\n <li>Arabic \u2014 advanced (verbal and written). Mandatory.<\/li>\n <li>English \u2014 intermediate (verbal and written). Minimum required.<\/li>\n<\/ul>\n\n<p><strong>Soft skills & competencies<\/strong><\/p>\n<ul>\n <li>Strong interpersonal and communication skills with the ability to liaise effectively across security, operations, and management teams.<\/li>\n <li>Ability to work cohesively in multi-cultural, multi-national teams while maintaining cultural sensitivity.<\/li>\n <li>Presentation skills: ability to prepare clear, accurate reports and briefings.<\/li>\n <li>High attention to detail and accuracy in data entry and records management.<\/li>\n <li>Proactive approach to problem identification and reporting.<\/li>\n <li>Discretion and professionalism in handling confidential employee and access data.<\/li>\n<\/ul><\/p><p><\/p>

<p><h4>About company</h4> <p>Belong, connect, grow, with KBR!<br> The KBR team delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.<br> KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Job purpose</h4> <p>This position is to assist in administration duties to the HSSE Manager and Field HSE Manager regarding record keeping, finances, timekeeping, contractual obligations, HR requirements, material, stores and equipment administration.</p> <h4>Duties and responsibilities</h4> <ul> <li>Assistance in financial record keeping for the HSE department.</li> <li>Facilitate and record keeping of all BOC correspondence letters and reports.</li> <li>Creating and upkeep of HSE tools, equipment and PPE issuing databases.</li> <li>Creating and upkeep of equipment orders databases.</li> <li>Assistance in time sheet collections and submissions.</li> <li>Record keeping of all contractual meeting agreements and minutes.</li> <li>Creating and upkeep of HR employee requirement.</li> <li>Control and coordination of HSE team calendars and rosters.</li> <li>Record keeping of all HSE team accommodation requirements and accommodation lists.</li> <li>Upkeep of the HSE incentive gifts inventory and issuing lists.</li> <li>Record keeping and booking of visa application and expiry dates and flight departure dates.</li> <li>Facilitate and record keeping of all service desk, IT and other departmental requests.</li> <li>Any other tasks related to HSE in general.</li> </ul> <h4>Qualification & training requirements</h4> <p>Diploma / Degree in business management administration or equivalent.<br> Working knowledge of HSE related activities.</p> <h4>Experience</h4> <p>1 years’ experience in procurements, logistics, finance and administration.</p> <h4>Language proficiency, computer and software skills</h4> <p>MS Office: Proficient at an advanced level.<br> English – upper intermediate (verbal & written).</p> <h4>Skills</h4> <ul> <li>Strong communication and presentation skills.</li> <li>Good knowledge of Office applications.</li> <li>Oil and gas and HSE experience is preferable.</li> <li>Good team working skills.</li> <li>Ability to focus on continuous self-learning and improvement.</li> <li>Ability to work cohesively and communicate successfully in multi-cultural teams whilst being aware of and sensitive to cultural differences.</li> <li>Ability to communicate, co-ordinate, and manage cost data flow interfaces with each function.</li> <li>Skilled preparing meaningful accurate reports, in clear and concise English, utilizing information and data received from third parties, SAP (or equivalent system) and own analyses.</li> </ul></p><p></p>

<p>Determine, review and establish the local and international policies, standards and specifications required for mechanical engineering work related to building construction and refurbishment, water supply stations and water wells, water supply networks for the project in Iraq. Carry out inspections of the water supply facilities to be constructed, assess the current situation of the mechanical systems, and design suitable upgrades/replacement of existing mechanical systems to meet the local and international standards and specifications applicable, and in consultation with all stakeholders. And or, propose, design the replacements and new installations. Prepare and/or review detailed mechanical engineering design documentation including drawings, specifications and scope of work reports to be included in water supply facilities construction tender documents. Prepare quality control and quality assurance documentation related to mechanical engineering work for new water supply facilities. and rehabilitation works. Assist the PM, Deputy PM, Water Supply Engineer and the QA/QC Engineer in the preparation of bidding documents for the new water supply facilities. Supervise on-site works carried out by contractors closely on a day to day basis to ensure quality of the works is monitored and controlled as per specification requirements. Prepare and submit progress reports to the Project Manager/Deputy PM at intervals agreed upon. Ensure safety and health of everyone involved in the project and general public by identifying risks and threats, planning, implementing and maintaining internationally acceptable safety standards in all aspects, at all stages of the project. Ensure all design and construction of water supply facilities and mechanical works is carried out in accordance with and in compliance with industry standards and international best practice energy efficiency principles, standards, guidelines and specification. Provide expert advice to all stakeholders including contractors, PM/Deputy PM, project staff , clients and donor agencies on Mechanical engineering related water supply facilities works where required. Preparing Mechanical drawing package including for new and or rehabilitation works. Preparing Mechanical SOW (scope of work) with technical specification including water wells, pump stations, water supply networks and related works, plumbing and fire protection systems. Designing and preparing a package of water supply and sanitation systems for small and medium scale projects. Using S-pipe and D-pipe or any other relevant and applicable software Create and review technical drawings, plans, and specifications using computer software and prepare design packages in line with client`s design planning manual and design reviewers instructions. Coordinate while required, with design reviewers and incorporate their comments if any. Perform detailed documentation to track project development and design process Ensure project timeline is met and project stays within budget Support the project team in the evaluation and endorsement of objectives and goals of contractor plans, including staffing and budgeting, milestone descriptions, risk management strategies, detailed schedules and scope descriptions, and work breakdown structures Check to assure all materials and /equipment have been tested, submitted and approved. Review all submittals to insure compliance with the plans and specification Inspect all material, equipment and mechanical tools delivered, at the time of receipt, to ensure compliance with submittals, and specifications. Resolve technical problems at site and the certification of construction work at site. Recommend design changes, cost reductions, warranty improvements, and manufacturing issues. Perform other duties as may be assigned. Establishment of procedures with time limits for inspection, sampling and testing of works and all other electrical requirements. Implementation and monitoring of quality assessments. Supervises the Quality Control functions/activities of a project or its parts, including Quality Control inspection schedules and the collection of Quality Records. Review all submittals to insure compliance with the plans and specifi cation Daily/Weekly/ Monthly report to the Project Manager on project progress activities. Project reporting Mechanical Engineer is to be reported to Project Manager (PM)</p><p><strong>Desired Candidate Profile</strong></p><p>Excellent oral and written communication skills. Strong interpersonal skills and ability to work as part of a team Very Good Knowledge in written and oral English and Arabic languages is required. Experience in the usage of computers and software packages (Autodesk AutoCAD, Microsoft office and mechanical design software).</p>

<p>We are looking for the right people people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world s largest providers of products and services to the global energy industry.</p><p>Job Duties</p><p>Under general supervision: From Surface Facilities IAM Project Manager or Project/Asset Manager, supervises the operations on the field projects for a given project or several projects in an asset. Establishes scope of work with site customer and site representative. Checks design documentation for adequacy to specific site conditions and agreed scope of work. Proposes engineering adjustments to site condition as required. Visits site before and during the project and verifies that applied project procedures by contractor will allow compliance of technical requirements and timely completion. Additional responsibilities include verifying project advance payment and contractor resource allocation; commenting and proposing adjustments to comply with project schedule and budget; verifying safety conditions at site and stop work if required; informing management and personnel of unsafe practice. Also participates in site project meetings with contractor and customer, and coordinates site inspection by QA/QC, HSE and commissioning teams in a timely matter. Prepares periodic reports for upper management.</p><p>Additional Role Responsibilities:</p><ul><li>(1). Supervises the activities of assigned personnel at BIN-UMAR &amp;SINDBAD Stations well site. Performs supervisory duties at the level established by management for the position;</li><li>(2). Supervises all activities under the Company Health, Safety and Environment (HSE) policies and procedures are fully implemented and adhered to, so that Loss Prevention is maximized;</li><li>(3). Drive innovative solutions to operating issues, ensure accurate measurement and optimize operations;</li><li>(4). Prepare, maintain, and execute terminal operating and capital budgets, establish and monitor key performance indicators;</li><li>(5). Set priorities, assign projects, monitor progress and set standards for a high performing team;</li><li>(6). Organization and Cooperate with maintenance team do the PM/CM and troubleshooting jobs;</li><li>(7). Monitor and operate the SAP/CMMS system.</li><li>(8). Contribute and participate in successful completion of plant improvements;</li><li>(9). Performs E.R.T. responsibilities as stipulated in Loss Control Procedures and acts as an emergency response team Manager in case of emergency.</li><li>(10). Control, minimize and monitor flare losses &amp; waste generation.</li><li>(11). Coordinates with Royal commission and other outside party for flare losses &amp; waste management.</li><li>(12). Identify team and individuals limitations and develop contingency plans to address any short fall.</li></ul><p>Qualifications</p><p>Requires undergraduate degree in Engineering or similar discipline, and preferably a minimum of five (5) years of progressive experience in planning, design and construction of surface facilities for oil fields. Relevent experience is highliy desirable: Minimum of 10-15 years relevant experience in their discipline or in an operations environment within the oil &amp; gas industry. Recognized International Qualifications (NVQ, C&amp;G, OPITO etc) Valid Emergency Response competence CMMS/SAP Experience Coaching &amp; Development Experience (Competence Assessors preferred) Commissioning experience Experience from similar challenging environments. (Wells experience a must for production operations personnel) Valid trade competencies (Complex, Flange Management, ESR s, Small bore tubing etc.) Internationally recognized driving license Good English skills, Arabic speaking advantageous ISSOW/PTW experience</p><p>Halliburton is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation .</p><p>Location Oils Opertion ST,N 29 Burjesia, Basra, Basrah, 61006, Iraq</p><p><br></p><p><strong>Desired Candidate Profile</strong></p><h4>Qualifications</h4>Requires undergraduate degree in Engineering or similar discipline, and preferably a minimum of five (5) years of progressive experience in planning, design and construction of surface facilities for oil fields. Relevent experience is highliy desirable: Minimum of 10-15 years relevant experience in their discipline or in an operations environment within the oil &amp; gas industry. Recognized International Qualifications (NVQ, C&amp;G, OPITO etc) Valid Emergency Response competence CMMS/SAP Experience Coaching &amp; Development Experience (Competence Assessors preferred) Commissioning experience Experience from similar challenging environments. (Wells experience a must for production operations personnel) Valid trade competencies (Complex, Flange Management, ESR s, Small bore tubing etc.) Internationally recognized driving license Good English skills, Arabic speaking advantageous ISSOW/PTW experience

<p><h4>Belong, connect, grow with KBR!</h4> <p>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</p> <p>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <p>KBR is looking for a Construction Manager to be based in Basra, Iraq – 28/28 rotation.</p> <h4>Job dimension</h4> <p>Lead and manage all site construction activities for the WIP-CSSP project, ensuring safe, timely, and cost-effective execution of the works.</p> <p>Ensure construction activities are executed in accordance with approved engineering deliverables, project specifications, quality requirements, and HSE standards.</p> <p>Coordinate all construction disciplines and interfaces to achieve construction milestones and project objectives.</p> <p>Monitor and manage EPC Contractor construction performance, productivity, and compliance with contractual obligations.</p> <p>Promote a strong safety culture and ensure construction activities comply with company HSSE requirements.</p> <h4>Activities</h4> <strong>Construction management</strong><br> <p>Lead and supervise all site construction activities covering:</p> <ul> <li>Civil and structural works</li> <li>Mechanical installation</li> <li>Piping works</li> <li>Electrical works</li> <li>Instrumentation and control systems</li> <li>Buildings and infrastructure</li> <li>Utilities and supporting facilities</li> </ul> <p>Ensure construction activities are executed according to:</p> <ul> <li>Approved AFC drawings</li> <li>Specifications and procedures</li> <li>Project schedule and priorities</li> <li>Applicable regulations and standards</li> </ul> <p>Coordinate site activities to optimize construction sequence and resource utilization.</p> <p>Monitor construction progress and identify recovery actions when required.</p> <strong>Contractor management</strong><br> <p>Manage and oversee EPC Contractor and subcontractor construction teams.</p> <p>Conduct regular construction coordination meetings.</p> <p>Review:</p> <ul> <li>Construction schedules</li> <li>Manpower plans</li> <li>Equipment deployment plans</li> <li>Construction methodologies</li> </ul> <p>Monitor contractor productivity and performance against project objectives.</p> <p>Ensure contractors implement approved procedures and construction practices.</p> <strong>Interface & coordination</strong><br> <p>Coordinate interfaces between:</p> <ul> <li>Engineering</li> <li>Procurement</li> <li>Construction</li> <li>Commissioning</li> <li>Operations</li> <li>HSE and Quality teams</li> </ul> <p>Ensure construction readiness prior to execution.</p> <p>Resolve construction issues and interface conflicts promptly.</p> <p>Support multidisciplinary coordination and decision-making.</p> <strong>Construction planning & progress</strong><br> <p>Review and validate construction execution plans.</p> <p>Monitor construction KPIs and progress against approved schedules.</p> <p>Identify risks to construction execution and implement mitigation plans.</p> <p>Participate in weekly and monthly progress reviews.</p> <p>Ensure accurate reporting of construction status and forecast completion dates.</p> <strong>Quality management</strong><br> <p>Ensure all construction activities comply with project quality requirements.</p> <p>Coordinate with QA/QC personnel for inspections and testing activities.</p> <p>Monitor punch lists and non-conformities.</p> <p>Ensure timely closure of quality issues and corrective actions.</p> <strong>Handover & commissioning support</strong><br> <p>Support mechanical completion activities.</p> <p>Ensure construction dossiers and turnover packages are complete.</p> <p>Coordinate system handovers to commissioning teams.</p> <p>Support commissioning, start-up, and operational readiness activities.</p> <h4>HSE responsibility</h4> <p>Demonstrate visible safety leadership and promote a strong HSSE culture.</p> <p>Ensure compliance with:</p> <ul> <li>Project HSE requirements</li> <li>Site procedures</li> <li>Permit-to-Work requirements</li> <li>Environmental regulations</li> </ul> <p>Participate in:</p> <ul> <li>Site safety audits</li> <li>Management safety walks</li> <li>Incident investigations</li> <li>Risk assessments</li> </ul> <p>Ensure unsafe acts and unsafe conditions are immediately addressed.</p> <p>Stop work when safety requirements are not met.</p> <h4>Required qualifications / experience</h4> <strong>Professional experience</strong><br> <ul> <li>Minimum 15 years of experience in construction management on major EPC/EPSCC projects.</li> <li>Proven experience on large industrial, oil & gas, energy, infrastructure, or utility projects.</li> <li>Strong experience managing multidisciplinary construction activities from detailed engineering through commissioning.</li> <li>Minimum 5 years as Construction Manager, Site Manager, or equivalent leadership role.</li> <li>Experience in greenfield megaprojects is preferred.</li> <li>Previous Middle East and/or remote site experience is highly desirable.</li> </ul> <strong>Technical skills</strong><br> <ul> <li>Strong knowledge of construction methodologies</li> <li>Multidisciplinary installation activities</li> <li>Construction planning and scheduling</li> <li>Contractor management</li> <li>Mechanical completion and turnover processes</li> <li>HSE leadership</li> <li>Quality management systems</li> <li>Strong understanding of EPC/EPSCC project execution</li> </ul> <strong>Level / diploma</strong><br> <p>Bachelor's Degree in Engineering (Mechanical, Civil, Electrical, Process, or equivalent).</p> <p>Professional accreditation or recognized project/construction management certification is an advantage.</p> <strong>Languages</strong><br> <p>Proficiency in English mandatory.</p> <strong>Soft skills</strong><br> <ul> <li>Strong leadership and people management capabilities</li> <li>Excellent communication and stakeholder management skills</li> <li>Strong decision-making and problem-solving abilities</li> <li>Ability to work effectively in a multicultural environment</li> <li>Results-oriented with strong focus on safety, quality, and schedule performance</li> </ul> <p>Interested and suitable candidates please apply for the role. Suitable candidates will be contacted directly.</p></p><p></p>

<p><h4>Job description - Construction M&P supervisor</h4> <p>The mechanical & piping construction supervisor is responsible for supervising field construction activities across mechanical and piping scopes within brownfield/greenfield project environments. The role ensures safe execution, constructability alignment, productivity improvement, and coordinated delivery of construction work fronts. The supervisor works closely with multi-discipline teams to meet project objectives for HSSE, cost, schedule, and quality.</p> <h4>Accountability / expectations:</h4> <ul> <li>Supervise mechanical and piping construction activities in accordance with project specifications, HSSE requirements, and construction standards.</li> <li>Support construction safety by promoting modularization, standardization, and maximizing off-plot fabrication to reduce site exposure.</li> <li>Monitor construction productivity, identify constraints, and escalate improvement opportunities to the construction manager.</li> <li>Assist in developing and implementing brownfield/greenfield construction strategies and execution plans for project phases.</li> <li>Ensure construction work fronts are aligned with engineering deliverables, procurement schedules, and handover sequences.</li> <li>Coordinate with lead to support construction strategies, schedules, and resource planning.</li> <li>Ensure mechanical and piping designs incorporate constructability principles, cold-work opportunities, modularization, and HSSE risk reduction.</li> <li>Participate in constructability reviews and support assessment of construction risks and mitigation measures.</li> <li>Coordinate multi-discipline interfaces to ensure smooth execution across mechanical, piping, civil, electrical, and instrumentation scopes.</li> <li>Provide technical guidance to field crews and contractors for mechanical and piping installation activities.</li> <li>Ensure compliance with project specifications, industry standards, and quality requirements.</li> <li>Oversee installation, testing, and commissioning readiness of mechanical and piping systems.</li> <li>Maintain accurate reporting of progress, productivity, and construction issues to the lead & construction manager.</li> <li>Capable of supervising multiple work scopes concurrently when required.</li> <li>Deliver construction activities safely, efficiently, and in alignment with project schedule and cost targets.</li> <li>Ensure engineering and procurement deliverables support construction sequencing and work-front availability.</li> <li>Support continuous improvement in construction execution through proactive identification of risks and opportunities.</li> <li>Maintain strong communication and coordination across all disciplines.</li> </ul> <h4>Education</h4> <p>BSc. degree in mechanical engineering, piping engineering, or related discipline.</p> <h4>Experience</h4> <ul> <li>5–8 years experience in oil & gas project design and engineering (mechanical/piping discipline).</li> <li>3–5 years experience supervising construction activities within a multidiscipline workforce.</li> <li>Experience in productivity measurement, resource-based planning, and level 4 scheduling.</li> <li>Strong understanding of brownfield/greenfield construction environments and associated HSSE requirements.</li> </ul> <h4>Skills</h4> <ul> <li>Strong supervisory, communication, and coordination skills.</li> <li>Ability to manage multiple work fronts simultaneously.</li> <li>Solid understanding of constructability, modularization, and field execution methodologies.</li> </ul></p><p></p>

<p><h4>Preface</h4> <p>We are seeking an experienced SAP Operations Manager to lead a small SAP team at the Majnoon Oil Field and ensure reliable, controlled, and business-aligned SAP operations. The role is critical to maintaining operational continuity across procurement, inventory, maintenance, finance, compliance, reporting, and wider field execution activities.</p> <p>SAP is a core business platform for Majnoon. It enables structured procurement, material availability, maintenance execution, financial control, approvals, compliance visibility, and management reporting. The SAP Operations Manager will ensure that SAP remains stable, usable, properly governed, and aligned with practical oil and gas workflows.</p> <h4>Professional summary</h4> <p>The ideal candidate will have more than 10 years of SAP experience, strong site-facing operational discipline, and proven ability to lead a compact support team in a complex industrial environment. The individual must be able to manage incidents, prioritize business-critical issues, coordinate with corporate SAP and vendor teams, improve user adoption, and maintain strong governance over access, licensing, data quality, and process compliance.</p> <h4>Core competencies</h4> <ul> <li>SAP operations leadership across SAP ECC and/or S/4HANA environments.</li> <li>Strong practical understanding of SAP MM, SAP PM, and SAP FI/CO processes.</li> <li>Oil and gas field process understanding, including maintenance, procurement, materials, cost control, approval of workflows, and operational reporting.</li> <li>Team leadership, work prioritization, coaching, knowledge transfer, and performance management.</li> <li>Incident, problem, change, access, licence, and escalation management within an ITIL-aligned support model.</li> <li>Data integrity, master data governance, compliance with evidence, and audit readiness.</li> <li>Clear communication with operations, maintenance, procurement, finance, compliance, IT, vendors, and client stakeholders.</li> </ul> <h4>Key responsibilities</h4> <ul> <li>Manage day-to-day SAP operations for site-based oil and gas activities, ensuring system availability, stable support, and timely issue resolution.</li> <li>Lead the SAP team, allocate work, manage priorities, monitor performance, coach team members, and ensure appropriate support coverage.</li> <li>Act as the primary site interface between SAP users, IM/IT leadership, corporate SAP support, vendors, and business process owners.</li> <li>Ensure SAP issues are logged, prioritized, investigated, escalated, and closed in line with agreed service levels and operational impact.</li> <li>Support SAP user access management, role changes, approval evidence, licence oversight, and segregation of duties considerations.</li> <li>Coordinate SAP process alignment with field workflows, reducing workarounds, duplicate data entry, manual reconciliation, and recurring user errors.</li> <li>Support onboarding and training for new SAP users, approvers, planners, warehouse teams, finance users, and operational stakeholders.</li> <li>Prepare concise leadership reporting covering SAP performance, critical issues, blockers, risks, recurring problems, and improvement actions.</li> <li>Maintain and improve SAP operational procedures, support guides, escalation routes, user instructions, and knowledge transfer materials.</li> <li>Support integration of SAP with relevant site systems, reporting tools, interfaces, and third-party applications where required.</li> </ul> <h4>SAP module and process coverage</h4> <p><strong>Confirmed core module focus</strong></p> <p>The current SAP Operations Manager role profile references SAP ECC / S/4HANA operations and the core modules SAP MM, SAP PM, and SAP FI/CO. These are therefore treated as the core module requirements for enhanced specification.</p> <p><strong>SAP MM - Materials Management</strong><br> Procurement, purchase requisitions, purchase orders, goods receipt, vendor coordination, inventory visibility, warehouse support, and material master data.<br> Operational relevance: supports spares availability, field procurement, stock control, materials traceability, and avoidance of operational delays.</p> <p><strong>SAP PM - Plant Maintenance</strong><br> Maintenance notifications, work orders, equipment structures, functional locations, asset history, maintenance planning, and execution support.<br> Operational relevance: supports asset reliability, corrective maintenance, planned maintenance, equipment availability, and operational continuity.</p> <p><strong>SAP FI/CO - Finance and Controlling</strong><br> Cost centers, internal orders, financial postings, cost capture, approvals, cost reporting, and compliance with finance and control requirements.<br> Operational relevance: enables transparent cost control, expenditure governance, budget alignment, and reliable financial reporting for operations.</p> <p><strong>Related SAP and integration areas - where applicable</strong></p> <ul> <li>SAP PS or project controls integration for WBS structures, commitments, project cost visibility, and finance/procurement alignment.</li> <li>SAP HCM, time-writing, or workforce charging interfaces where locally used for labour capture, working time approval, or cost recovery.</li> <li>SAP Basis, security, authorization, licensing, transport, monitoring, and technical escalation coordination.</li> <li>SAP reporting, data extracts, interfaces, dashboards, and integration points used to improve operational visibility and reduce manual reconciliation.</li> </ul> <h4>Required experience</h4> <ul> <li>Minimum 10 years of SAP experience, including operational support, functional support, SAP service delivery, or SAP team leadership responsibility.</li> <li>Experience supporting SAP in oil and gas, energy, engineering, construction, utilities, industrial operations, or comparable large-scale operational environments.</li> <li>Proven leadership of small technical or functional teams, including workload planning, performance monitoring, coaching, and service prioritization.</li> <li>Strong experience with SAP incident management, problem management, access support, change coordination, escalation management, and service reporting.</li> <li>Ability to convert user issues and operational pain points into clear SAP support actions, escalation packs, process improvements, or training interventions.</li> <li>Experience working with Finance, Procurement, Supply Chain, Warehouse, Maintenance, Operations, Project Controls, HR/time-writing, Compliance, and IT stakeholders.</li> </ul> <h4>Technical skills</h4> <ul> <li>SAP ECC and/or SAP S/4HANA operations experience.</li> <li>Working knowledge of SAP MM, PM, and FI/CO modules and their operational dependencies.</li> <li>Awareness of SAP Basis, authorizations, roles, user access, licence administration, interfaces, monitoring, and transport coordination.</li> <li>Understanding of SAP HANA and/or Oracle database concepts, performance monitoring, reporting extracts, and basic troubleshooting.</li> <li>General IT infrastructure, endpoint, network, and service management awareness sufficient to coordinate cross-IT issue resolution.</li> <li>Strong MS Office and reporting capability, including issue trackers, service dashboards, action logs, operational reports, and leadership summaries.</li> </ul> <h4>Certifications</h4> <ul> <li>SAP Certified Application Associate in a relevant module such as MM, PM, FI/CO, S/4HANA, or SAP business process integration preferred.</li> <li>ITIL Foundation or equivalent service management certification advantageous.</li> <li>Oil and gas safety, site induction, or industrial operations safety training preferred.</li> <li>Project management or team leadership certification is advantageous where the candidate has broader service improvement responsibilities.</li> </ul> <h4>Languages</h4> <ul> <li>English: fluent business and technical communication required.</li> <li>Arabic: native or fluent capability preferred.</li> <li>Chinese: advantageous.</li> </ul> <h4>KPIs and success measures</h4> <ul> <li>Maintain SAP system availability in line with agreed operational service levels, with target uptime of 99.9 percent where technically achievable.</li> <li>Ensure critical SAP incidents are acknowledged, prioritized, escalated, and progressed within agreed SLA targets.</li> <li>Maintain controlled user access, approval evidence, licence oversight, and compliance readiness.</li> <li>Deliver monthly SAP operations reporting covering performance, risks, blockers, open actions, recurring issues, and improvement progress.</li> <li>Improve SAP team capability through documented procedures, coaching, cross-training, and knowledge transfer.</li> <li>Reduce repeat issues, avoidable workarounds, data quality defects, and manual reconciliation activities through targeted improvement actions.</li> </ul> <h4>Reporting structure</h4> <ul> <li>Reports directly to the Site IT Manager / IM & IT leadership.</li> <li>Works closely with Operations and Maintenance stakeholders to ensure SAP supports practical field execution requirements.</li> <li>Coordinates with Corporate SAP functional and technical teams for escalations, enhancements, access issues, system updates, and specialist support.</li> <li>Collaborates with Finance, Procurement, Supply Chain, Compliance, Project Controls, HR/time-writing, vendors, and external support providers as required.</li> </ul> <h4>Preferred candidate profile</h4> <p>The preferred candidate will combine SAP functional awareness, disciplined service management, and practical oilfield delivery experience. They should be comfortable working directly with users, challenging poor data or weak process discipline, supporting operational priorities, and communicating clearly with leadership. The candidate should be capable of stabilizing daily SAP operations while strengthening local capability, improving documentation, and reducing dependency on informal support arrangements.</p></p><p></p>

<p><h4>Belong, connect, grow, with KBR!</h4> <p>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</p> <p>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Job description: Commissioning manager</h4> <p><strong>Location:</strong> Iraq (28/28 rotational assignment)</p> <h4>Job responsibility and requirement</h4> <p>The commissioning manager shall be responsible for the commissioning deliverables of KBR Majnoon projects, managing team and resources to ensure the scope of work is executed in a safe timely manner in line with project schedule and milestones.</p> <p>Manage and lead commissioning team and vendors, monitoring progress and ensuring work execution is both safe and best practices.</p> <p>Development of commissioning execution plans, schedules and procedures.</p> <p>Focal start up and operational readiness communications with management team, client and facilitate handover activities.</p> <h4>Accountability / expectations</h4> <ul> <li>Lead by example and coach good HSE and safe working practices.</li> <li>Develop commissioning strategy and execution plans.</li> <li>Develop commissioning and input to the integrated schedule – in line with project timeline and milestones.</li> <li>Develop commissioning and start-up procedures.</li> <li>Coordinate between the engineering, construction, and operation teams to ensure that all systems are installed, tested, verifying readiness for RFSU claims.</li> <li>Manage completion systemization and implementation to ensure works can progress methodically and efficiently.</li> <li>Manage resources to ensure preparation and review of commissioning procedures, completions system and RLMs.</li> <li>Ensure test records of all commissioning activities, including test results, reports, and any issues encountered are accurate and compiled in line with completions strategies.</li> <li>Ensure all commissioning dossiers and documentation is completed, updated, and ready for review and handover.</li> <li>Manage commissioning vendor requirements.</li> <li>Develop work execution flow scheme (WEFS).</li> <li>Develop readiness and ORA documentation, PSSR, PSUA, SOF to support RFSU certification claims.</li> <li>Develop commissioning consumables list and commissioning spares list.</li> <li>Develop and implement project to asset transfer plan (P2A) comprising of physical assets with system turnover team and the information management documents.</li> <li>Drive the flawless project delivery (FPD) with a focused ownership on the FPD deliverables specific for the CSU areas.</li> <li>Manage and support interface with the asset’s operations & maintenance during start up and handover.</li> </ul> <h4>Experience required:</h4> <ul> <li>20+ years of experience in oil & gas industry.</li> <li>Bachelor honours degree in a relevant engineering discipline from a recognised institution.</li> <li>Master’s degree in relevant engineering discipline.</li> </ul></p><p></p>

<p>Under general supervision: From Surface Facilities IAM Project Manager or Project/Asset Manager, supervises the operations on the field projects for a given project or several projects in an asset. Establishes scope of work with site customer and site representative. Checks design documentation for adequacy to specific site conditions and agreed scope of work. Proposes engineering adjustments to site condition as required. Visits site before and during the project and verifies that applied project procedures by contractor will allow compliance of technical requirements and timely completion. Additional responsibilities include verifying project advance payment and contractor resource allocation; commenting and proposing adjustments to comply with project schedule and budget; verifying safety conditions at site and stop work if required; informing management and personnel of unsafe practice. Also participates in site project meetings with contractor and customer, and coordinates site inspection by QA/QC, HSE and commissioning teams in a timely matter. Prepares periodic reports for upper management. Additional Role Responsibilities: (1). Supervises the activities of assigned personnel at BIN-UMAR &amp;SINDBAD Stations well site. Performs supervisory duties at the level established by management for the position; (2). Supervises all activities under the Company Health, Safety and Environment (HSE) policies and procedures are fully implemented and adhered to, so that Loss Prevention is maximized; (3). Drive innovative solutions to operating issues, ensure accurate measurement and optimize operations; (4). Prepare, maintain, and execute terminal operating and capital budgets, establish and monitor key performance indicators; (5). Set priorities, assign projects, monitor progress and set standards for a high performing team; (6). Organization and Cooperate with maintenance team do the PM/CM and troubleshooting jobs; (7). Monitor and operate the SAP/CMMS system. (8). Contribute and participate in successful completion of plant improvements; (9). Performs E.R.T. responsibilities as stipulated in Loss Control Procedures and acts as an emergency response team Managerer in case of emergency. (10). Control, minimize and monitor flare losses &amp; waste generation. (11). Coordinates with Royal commission and other outside party for flare losses &amp; waste management. (12). Identify team and individuals limitations and develop contingency plans to address any short fall.</p><p><strong>Desired Candidate Profile</strong></p><p>Requires undergraduate degree in Engineering or similar discipline, and preferably a minimum of five (5) years of progressive experience in planning, design and construction of surface facilities for oil fields. Preferred Experience: Minimum of 10-15 years relevant experience in their discipline or in an operations environment within the oil &amp; gas industry. Recognized International Qualifications (NVQ, C&amp;G, OPITO etc) Valid Emergency Response competence CMMS/SAP Experience Coaching &amp; Development Experience (Competence Assessors preferred) Commissioning experience Experience from similar challenging environments. (Wells experience a must for production operations personnel) Valid trade competencies (Complex, Flange Management, ESR's, Small bore tubing etc.) Internationally recognized driving license Good English skills, Arabic speaking advantageous ISSOW/PTW experience</p>

<p><h4>Job purpose</h4> <p>The DS1 Security Manager is responsible for the security of Degassing Station One (DS 1) and providing a secure environment in which to operate. He is also responsible for all Majnoon field access permissions in accordance with BOC and Ministry of Oil Information/Security Clearances Office (MoO ISCO) procedures. He manages a team of Iraqi staff to (1) administer IFMS OFP database and (2) administer input and change data to the Lenel field access control system and issuance of field access badges. He supports the BOC(S) and PACs lead managing Entry Control Point One.</p> <h4>Duties and responsibilities</h4> <ul> <li>Overall responsible for the security standard operating procedures (SOP’s) at DS1 and the DS1 Facility Security Plan.</li> <li>Maintaining the Security Operating Level (SOL) in accordance with the Field Security Plan (FSP) and managing change when required.</li> <li>Designated on scene commander (OSC) for all security related incidents at DS1.</li> <li>Providing security awareness training to all employees at DS1.</li> <li>Implementing loss prevention procedures and ensuring security of offices during the quiet hours.</li> <li>Security incident reporting to the Field Security Manager.</li> <li>Supports BOC(S) PACs Lead and OPF Integration Lead with ECP1 operations when required.</li> <li>Approves all field access control submissions in accordance with BOC and MoO ISCO procedures.</li> <li>Responsible for managing Majnoon access control procedures (including database) and implements changes in accordance with BOC and MoO ISCO directives.</li> <li>Line manages the third party Iraqi Security administrative team, inclusive of role specific training and personal development.</li> <li>Field access focal point for all field contractors.</li> <li>Maintains relations and daily engagements with key Iraqi stakeholders to support field business requirements (MoO, BOC, OPF and IP when required).</li> <li>Maintains sustainable logistics support for DS 1 security operations and field access.</li> <li>Fault reporting of physical and technical security infrastructure for corrective action.</li> <li>Supports the site operations supervisor during planned works to ensure appropriate security coverage and measures.</li> <li>Provision of routine and non-standard reports as required by the business.</li> </ul> <h4>Qualification and training requirements</h4> <ul> <li>Management certificate, diploma, recognition of prior learning (RPL) in security/risk management (preferable but not essential).</li> </ul> <h4>Experience</h4> <ul> <li>Previous military/law enforcement experience.</li> <li>Minimum of five years’ management in commercial security.</li> <li>Two years’ experience in hostile environment is a minimum qualifying period.</li> <li>Relevant job experience within the oil and gas industry.</li> </ul> <h4>Language proficiency, computer and software skills</h4> <ul> <li>Intermediate user of Microsoft Office related software.</li> <li>Advanced English – verbal and written.</li> </ul> <h4>Skills</h4> <ul> <li>Ability to work cohesively and communicate successfully in multi-cultural teams whilst being aware of and sensitive to cultural differences.</li> <li>Capable of operating unsupervised and making balanced decisions.</li> <li>Ability to operate under pressure and meet stringent business timelines when required.</li> <li>Good verbal communication skills.</li> <li>Good written communication and presentation skills.</li> <li>Good knowledge of corporate security operations and procedures.</li> <li>Good knowledge of private security company operations for mobile and manned guarding.</li> <li>Interpersonal skills - approachable and capable of maintaining stakeholder relations.</li> <li>Good analytical capability.</li> </ul></p><p></p>