وظائف مهندسى امن معلومات في العراق

<p>The Chief Engineer will be based at one of the Amentum sites in Iraq and serve the Operations and Maintenance Support Services (OMSS) contract in support of the U.S. Department of State. The Chief Engineer is responsible for all water purification, water storage, water distribution and wastewater treatments, as well as generators, and associated power generation, transmission and distribution equipment. The Chief Engineer is also responsible for the safe operation and maintenance of power plants, generators, compressors, air conditioning systems, etc., and operates industrial machinery and equipment in various forms.</p><p>DUTIES:</p><ul><li>Responsible for maintaining a safe workplace and ensuring safety is the highest priority in the workplace.</li><li>Comply with all Environmental &amp; Safety and Quality Assurance requirements and goals. Provide information and materials to these divisions as necessary to ensure adequate and legal documentation.</li><li>Responsible for managing, monitoring and tracking physical plant and building operations services.</li><li>Supervise and oversee the operations of the water and wastewater treatment plants to include all water quality laboratory, pumping, filtering, piping and control systems.</li><li>Ensure the viability, availability and safety of water treatment and waste distribution systems.</li><li>Maintain water well operations and water storage systems.</li><li>Manage water treatment waste stream to contractual standards.</li><li>Oversee the:</li><ul><li>Prime power and water/wastewater treatment programs;</li><li>Operation, calibration, diagnostics, troubleshooting and repairs to all mechanical, electrical equipment systems and electrical/pneumatic control systems.</li><li>Preventative maintenance, condition monitoring, repair, installation and modernization of all power generation, transmission and distribution equipment on site; and</li><li>Support of prime power generators made by Caterpillar, Cummins, Perkins, FG Wilson and other manufacturers, with outputs ranging from 20KW up to 160KW.</li></ul><li>Provide daily guidance and direction to supervisors, operators, mechanics and technicians.</li><li>Perform scheduled and unscheduled inspections.</li><li>Report any malfunctions or lack of compliance with SOW to the Chief Engineer.</li><li>Assist in developing the SOW when requested, including diagrams and specifications in compliance with Overseas Building Operations (OBO), Environmental Protection Agency (EPA), Occupational Safety and Health Administration (OSHA) and National electric Code (NEC) standards.</li><li>Maintain effective, timely and respectful communication and interaction with other employees and managers and support other organizations.</li><li>Perform administrative tasks including ordering material, inventorying and scheduling work.</li><li>Manage logistics, stock levels and workflow processes.</li><li>Collect, analyze and summarize data for report preparation and submit written reports.</li><li>Maintain appropriate technical library and record keeping, which documents all procedures necessary to accomplish assigned responsibilities.</li><li>Responsible for facility custodianship of work area and management of tools, equipment and spare parts.</li><li>Take initiative to analyze situations and make frequent technical decisions based on specifications, safety and electrical codes.</li><li>Evaluate operational effectiveness and develop/maintain effective operational control mechanisms.</li><li>Responsible for allocating and managing staff resources according to changing needs</li><li>Identify problem areas and respond to mission requirements to perform task order requirements.</li><li>Plan and manage projects.</li><li>Control resources; monitor staff proficiency and qualifications; monitor the locations and activities of assets; and coordinate the flow of information to and from O&amp;M staff and USG representatives.</li><li>Resolve physical plant and building operations issues.</li><li>Provide professional engineering guidance for all future work and technical proposals and will be responsible for drafting and presenting reports and analysis of system performance and recommendations for improvement.</li><li>Interpret all architectural, civil, structural, mechanical, electrical, plumbing, and fire system diagrams or drawings for large facilities.</li><li>Continually interface with Department of State Facility Management personnel in order to coordinate the work being completed on the equipment systems within the Utilities section and brief the customer during meetings and site surveys.</li><li>Perform additional duties and projects as assigned.</li></ul><p>REQUIRED:</p><ul><li>Minimum Acceptable Experience Level:</li><ul><li>Five (5) or more years supervisory experience in physical plant and building operations, including power plants for large facilities.</li></ul><li><br></li><li><br></li><li>Language Skills: Strong, professional, oral and written English communication skills.</li><li>Medical: Favorable passage of a drug screen and physical examination.</li></ul><p>DESIRED:</p><ul><li>Degree in Electrical or Mechanical Engineering.</li><li>Relevant overseas physical plant and building operations experience.</li><li>Previous out of home country experience is highly desirable and previous work experience in harsh environmental conditions is a plus.</li><li>Experience working with Amentum.</li></ul><p>OTHER KNOWLEDGE, SKILLS AND ABILITIES:</p><ul><li>Knowledge of principles and processes involved in operating and supporting power generation, transition, and distribution as well as water and wastewater treatment functions at an overseas facility.</li><li>Experience providing excellent customer services.</li><li>Ability to work in a fast-paced environment that requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules.</li><li>Cross-cultural sensitivity with an international perspective.</li><li>Excellent organizational and time management skills.</li><li>Ability to become an active and functioning member of a team.</li><li>Must have the ability to be innovative and be an agent for change.</li></ul><p><br></p><p><strong>Desired Candidate Profile</strong></p><ul><li><br></li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <strong> We are supporting a leading international Oil &amp; Gas operator in Basra to hire an experienced <strong>Wells Civils Data Engineer.<br></strong><br>This is a unique opportunity to contribute to a long-term, high-impact project, working alongside global experts on one of the region’s most strategic energy developments.<br>With over 1500 workers supporting our clients in Iraq, NES has deep insight into their culture and hiring expectations - allowing us to support candidates effectively throughout the hiring process. <br> <br>Job Description <br>Job Title&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;:Wells Civils Data Engineer<br>Job Category&nbsp; &nbsp;:Wells - Drilling, Workover and Well Services<br>Location&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;:Basra (rotational 14:14 subject to change)<br>Role Summary:<br></strong>The Wells Civils Data Engineer reports directly to the Wells Civils Manager. <br>The role is responsible for all data related to civil scope of works for drilling, workovers and well services in the field. As required, may also be responsible for the correlation and updating QAQC &amp; KPI processes.<br>The role is instrumental in maintaining the wells civil databases, strengthening commitment to excellence, operational compliance and efficiency.<strong><strong> <br>Key Responsibilities<br></strong></strong><ul><li>Compile daily contractor reports and prepare the Wells Civils daily report.</li><li>Prepare and correlate the Monthly Dashboard for publication in Power BI.</li><li>Coordinate training requests, manage approvals, send notifications, and track progress.</li><li>Update the Civils Operations Tracker with daily data entries.</li><li>Oversee the Call Out Cost Tracker, ensuring autonomy and accuracy.</li><li>Prepare call outs, input into the cost tracker and send to Civils Team Leader for signatures</li><li>Prepare &amp; issue completion certificates to the Civils Team Leader for required signatures.</li><li>Maintain document controls for the wells folders to ensure all information is current.</li><li>Carry out additional duties as assigned.</li></ul><strong><strong><strong>Qualifications &amp; Experience:<br></strong><br><strong>Essential:</strong><br></strong></strong><ul><li>A minimum of 3 years’ experience in Data Management or a Document Control role within the Oil &amp; Gas industry.</li><li>Demonstrates advanced proficiency in utilizing the Microsoft Office suite of applications.</li><li>Excel expert</li><li>Skilled in MS Project</li><li>English language skills – both written &amp; spoken.</li><li>Arabic Speaker.</li><li>Capable of handling a fast-paced, high-volume work environment with frequent challenges.</li><li>Demonstrated experience in managing dynamic, multi-site operations.</li><li>Strong communicator &amp; team player.</li><li>Attention to detail</li></ul><strong><strong>&nbsp;<br><strong>Preferred:</strong><br></strong></strong><ul><li>A bachelor’s degree in Engineering or a technically related subject is desired or analogous discipline (Scientific).</li><li>International experience preferred Middle East onshore.</li></ul><br> <strong>Why This Opportunity Stands Out:</strong><br>• Long-term project stability (many contractors exceed 10 years)<br>• Exposure to a major global operator<br>• Opportunity to work alongside industry-leading professionals<br><strong> Why Apply Through NES?</strong><br>NES is the world’s leading engineering staffing provider, operating across Oil &amp; Gas, Power, Life Sciences, and infrastructure sectors.<br><ul><li>80+ offices across 45 countries</li><li>24,000+ contractors globally and 10,000+ in the Middle East</li><li>Strong regional presence and long-term client partnerships</li></ul><br> If you find this opportunity matching your skills or if you know someone suitable for the role, please drop your CV on sayali.kothmire@nesfircroft.com<br>With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil &amp; Gas, Power &amp; Renewables, Chemicals, Construction &amp; Infrastructure, Life Sciences, Mining and&nbsp;Manufacturing&nbsp;sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients. <br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Lead Mechanical Engineer<br><br><span><u><b>Lead Mechanical Engineer</b></u></span><b>EFLD35 - Principal Technical Professional - Field Engineering</b><br>KBR Sustainable Technology Solutions (STS) provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design capabilities, and smart solutions to optimize planned and operating assets.<b><u>Responsibilities:</u> </b>• Day to day delivery of Mechanical Engineering support for site operations.• Deliver safe and effective operations by managing risks, addressing queries and minor modifications activities.• Collaborates with Central Engineering team to identify and define engineering solutions to reduce risk and grow installed production capacity.• Promotes a culture of open safety reporting and continuous improvement.• Provides immediate front line support for Operations and Maintenance teams to resolve minor issues and escalate more significant issues to the Central Engineering Team.• Ensures asset Mechanical Engineering risks (both static and rotating) are understood, controlled, managed and reduced.• Participates in a variety of asset and project risk assessments• Input into anomaly assessment and resolution plans.• Monitors condition monitoring data and health of static and rotating equipment and associated operating envelopes, recording and investigating all Safe Operating Limit excursions.• Monitors static/rotating equipment KPIs and initiates corrective actions as necessary.• Provides Mechanical support to technical MoCs and Engineering Queries• Acts as technical interface with Projects and Modifications organisation, including development of Statement of Requirements (SOR) and Project Initiation Requests (PIRs) and Decision Support Packages (DSP)• Supports delivery of Production Efficiency Improvement and Defect Elimination processes (including simple investigations for deferrals and vulnerabilities)• Identifies production vulnerabilities and optimization opportunities to support production forecast and grow IPC.• Performs follow-up actions and observations from self-verification checks that are related to Mechanical Engineering• Participates in Start Up Readiness and Assurance Reviews• Provides coaching to junior engineers.<br><u><b>Experience, Qualifications &amp; Key Skills</b></u>• Above 10 Years experience in O&amp;G industry (Preferable with IOC’s direct or contract)• Professional (Chartered) Engineer Preferred• Technical degree in Mechanical Engineering or allied engineering subject.• Experience in previous asset engineering / operations support engineering role• Practical exposure to production facilities• Excellent communication, interpersonal and coaching skills• Strong bias for being proactive and getting results• Excellent IT skills – Office suite, document management, applications for CMMS and Change Management.• Contribute to an environment in which all team members are respected regardless of their individual differences and are motivated to improve both their individual and team contributions to achieve desired business results• Skilled in behavior change management<br><u><b>Preferred Qualifications:</b></u><ul><li>Certified Professional Engineer</li></ul><br><p><b>Belong. Connect. Grow. with KBR! </b></p><br><br><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Job Title: Lead Process Safety Engineer<br> Department / Function: Maintenance &amp; Engineering <br> Duration: 12 months renewable<br> Location: Basra, Iraq<br> Rotation: 28/28<br><strong>Role Synopsis</strong><br>An outstanding opportunity for a highly motivated individual to join an exciting division. This role will have the opportunity to contribute in a positive way to help build a sustainable future for the client and the people of Iraq. The Lead Process Safety Engineer (LPSE) will be a member of the Central Engineering Team reporting into the Process Safety Team Lead (PSTL). The LPSE will provide deep process safety engineering expertise and judgment in service of the operation and development of the Rumaila field. The LPSE shall work closely with Projects and Area Operations to ensure efficient handover of all issues that require process safety engineering input to resolve.<br>The incumbent is expected to assist the PSTL with the Process Safety programme for the Rumaila Operation and help champion all aspects of good Process Safety management in an aging oilfield.<br> <br><strong>Key Accountabilities</strong><br><ul><li>Promote a culture of process safety and continuous improvement.</li><li>Assist the PSTL with the nationalisation program and support professional development of Iraqi nationals.</li><li>Provides process safety engineering expertise to support the wider organisation through engineering guidance and by performing and reviewing complex, or non-routine process safety engineering calculations, risk assessment and analyses.</li><li>Provides process safety engineering expertise to EQs, MoCs and Projects including coordination with Production / Operations/ Maintenance staff to identify / prioritise engineering activities.</li><li>Provide assurance on process safety engineering compliance with applicable Standards, Specifications, Codes and Regulations within organisation and 3rd Ensure that non-conformities and temporary deviations are identified and assessed.</li><li>Perform / review risk and consequence analysis and where required coach others on the use of risk analysis and consequence modelling techniques such as QRA, FERA, Explosion Modelling, Fire and Gas Mapping using industry standard software such as PHAST</li><li>Where required facilitate and participate in process safety design reviews and safety studies such as HAZOP and HAZID/ENVID.</li><li>Working knowledge of functional safety concepts and the application of industry standards e.g. IEC61508/11, in design and operational phases.</li><li>Ensures critical process safety documentation and information, e.g. Bowtie diagrams are kept up to date.</li><li>Assists with the reviews of the impact of emerging risks.</li><li>Communicates process safety engineering lessons learned and encourages a culture of sharing experience and continuous improvement.</li><li>Where required, provides process safety engineering expertise in performing incident investigations and defect investigations.</li><li>Provides process safety engineering expertise to delivery of regional actions. Leads on resolution of complex, multi-discipline technical issues where the dominant component is process safety related.</li></ul><strong>Essential Education</strong><br>Degree / diploma qualified engineer or equivalent work experience. BSc, BEng or MEng (UK), BSc (US), or international equivalent in Chemical / Process Engineering or other relevant engineering subject.<br>Professional accreditation, such as Professional Engineer or Chartered Engineer.<br><strong>Essential experience and job requirements</strong><br>At least 15 years industry experience with 5 years in international multicultural operational roles across the full value chain of hydrocarbon and water production facilities. Experience in brownfield operations process safety engineering, reliability, modifications and strong technical leadership with influencing capabilities. <br>An ability to work effectively with other disciplines / teams to understand and assess complex issues and develop pragmatic solutions.<br>Proven ability in practical application of engineering standards and practices for process safety engineering. Candidate to demonstrate familiarity with all relevant industry process safety engineering codes, standards, and practices (API, ASME, ISO etc.), and relevant experience with key process safety engineering tools such as Phast, Bowtie XP, Aspen HYSYS &amp; Flare System Analyser.<br><strong>Desirable criteria and qualifications</strong><br><ul><li>Key skills include communication, interpersonal relationships, facilitation, influencing, and negotiating across department.</li><li>Ability to develop others and foster diverse relationships in a multicultural environment.</li><li>Ability to identify correct priorities of maintenance and engineering support activities.</li><li>Ability to Identify and assess process safety hazards.</li><li>Ability to speak Arabic would be beneficial but not essential.</li></ul><strong>Other Requirements</strong><br><ul><li>A passion and relentless drive for continuous improvement.</li><li>Strong use of IT systems to analyse data, and produce reports &amp; KPI’s etc.</li><li>Strong interpersonal skills with experience influencing operating teams and contractors.</li><li>Strong cultural awareness.</li><li>Able to prioritise work in a high activity environment.</li><li>Able to work within a multidisciplinary team.</li><li>Ability to handle multiple tasks with minimal supervision.</li><li>Strong bias for being proactive and getting results.</li><li>Demonstrate planning, organizational and communication skills.</li></ul><br>With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil &amp; Gas, Power &amp; Renewables, Chemicals, Construction &amp; Infrastructure, Life Sciences, Mining and&nbsp;Manufacturing&nbsp;sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients. <br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Wood is recruiting for a Senior Commissioning Engineer to join its Iraq business unit focusing on supporting the Commissioning &amp; Start-Up Manager, drive contractors across all disciplines and accelerate activities in fast-track mode, with no compromise on safety or quality.</p><br><p>This role is a full-time on-site role in Basra, Iraq with travel requirement.<br><strong>Reports to: </strong>Commissioning &amp; Start-Up Manager&nbsp;<br> &nbsp;</p><br><br> Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy &amp; Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com<br> <b>Diversity Statement&nbsp;</b><br> We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.<br><br>Responsibilities:<br><p>Wood is recruiting for a Senior Commissioning Engineer to join its Iraq business unit focusing on supporting the Commissioning &amp; Start-Up Manager, drive contractors across all disciplines and accelerate activities in fast-track mode, with no compromise on safety or quality.</p><br><p>This role is a full-time on-site role in Basra, Iraq with travel requirement.<br><strong>Reports to: </strong>Commissioning &amp; Start-Up Manager&nbsp;</p><br><p><i><strong>#Wood #Iraq #Basra #Senior Commissioning Engineer&nbsp;</strong></i></p><br><p><strong><u>The role</u></strong></p><br><p>This is an exciting opportunity for an experienced&nbsp;Senior Commissioning Engineer&nbsp;to join our Iraq Business Unit.</p><br><p><strong>Our Clients and Projects&nbsp;</strong></p><br><p><strong>Designing the future. Transforming the world.&nbsp;</strong></p><br><p>This Project aims to take over the existing asset and maximize the production in 2 phases. This is a fast-track project and schedule-oriented Design to enhance the production.&nbsp;</p><br><p>The Phase 1 will restore, upgrade, and develop the current plant (CPF1) including: Restoration of initial CPF1 capacity; building a new export pipeline (24”, ~30km); restoration of CPF1 integrity and operability; flaring elimination and released water; development of new flowlines, pads, and electrification network for approximately 30 new wells; debottlenecking of the plant; upgrade of the Safety and Security facilities.&nbsp;</p><br><p>Our scope is to provide Engineering, Procurement services and Construction assistance (EPsCa) for the initial development phase of the field in Southern Iraq. The scope of services includes FEED, detailed design, procurement support, and construction and commissioning assistance.</p><br><p><strong><u>What we can offer</u></strong></p><br><ul> <li><strong>Meaningful and interesting projects</strong> Delivered to high profile clients and complex projects in Iraq&nbsp;</li> <li><strong>Commitment to Diversity and Inclusion</strong>; we are an organisation actively committed to diversity and inclusion across our business with employee networks committed to giving all employees a voice&nbsp;</li> <li><strong>Competitive salary</strong> with regular salary reviews to ensure we are rewarding at the right level in line with the market&nbsp;</li> <li><strong>Medical Insurance:&nbsp;</strong>Ensures inpatient and outpatient medical care is available should you require treatment.&nbsp;</li> <li><strong>Commitment to continued professional development;</strong> development plans that are tailored to your individual needs and interests&nbsp;</li> <li><strong>Global connections</strong>: join experts around the world who are at the leading edge of our industry, shaping the standards of our profession&nbsp;</li> <li><strong>Long Service Award:&nbsp;</strong>Wood values the commitment and loyalty of our people. Celebrating Long Service provides an opportunity for the business to demonstrate their appreciation of the hard work, dedication and many years’ services of our employees at 5-year service milestones&nbsp;</li></ul><p><strong><u>Job Objectives/Project context:</u></strong></p><br><p>The project is a gas plant located in Iraq, delivered under a DBOOM (Design, Build, Own, Operate, Maintain) contract. The Construction phase and Mechanical Completion are ongoing, Commissioning to be started very sooner. An experienced reinforcement is required to support the Commissioning &amp; Start-Up Manager, drive contractors across all disciplines and accelerate activities in fast-track mode, with no compromise on safety or quality.</p><br><p><strong>Key Responsibilities:</strong></p><br><ul> <li><strong>Monitoring &amp; driving</strong>: Ensure day-to-day monitoring of contractors’ progress across all disciplines (ICSS, mechanical, electrical, instrumentation, HVAC, utilities…).</li> <li><strong>Acceleration</strong>: Challenge contractors, identify bottlenecks, enforce priorities and push teams to meet commissioning milestones.</li> <li><strong>Methodology</strong>: ORBIT methodology is considered for this project for the follow up of (subsystems, ITR, punch lists, MC/RFCC, completion dossiers).&nbsp;</li> <li><strong>Documentation</strong>: To make sure of the readiness of procedure and dossier to be ready for the activities. Review and validate commissioning procedures, JSA, energization dossiers, LoTo, PSSR…And to prepare all the handover of the phase Precom - Commissioning.</li> <li><strong>Coordination</strong>: Coordinate Mechanical Completion, pre-commissioning, commissioning and start-up activities while securing interfaces and SIMOPS.</li> <li><strong>Reporting</strong>: Run daily and weekly review meetings with Construction, CSU and Company Representative.</li> <li><strong>Handover</strong>: Deliver the closure of punch lists (A/B), remarks clearance and handover to operations.<br> &nbsp;</li></ul><br>Qualifications:<br><p><strong>What makes you remarkable?&nbsp;</strong></p><br><p>At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world’s most critical challenges.&nbsp;&nbsp;</p><br><p><strong>Expected:</strong></p><br><ul> <li>Engineering degree (MSc / BSc) in chemical, mechanical, electrical, instrumentation engineering or equivalent.</li></ul><p><strong>Experience:</strong></p><br><ul> <li><strong>Experience</strong>: Minimum 15 years of experience in commissioning and start-up of Oil &amp; Gas / LNG / petrochemical facilities.</li> <li><strong>Projects</strong>: Proven track record on at least two (2) gas plant, LNG or refinery projects delivered in fast-track mode.</li> <li><strong>Methodology</strong>: knowledge of OPERCOM and Orbit is a plus.</li> <li><strong>Environment</strong>: Previous experience working for a major international operator and managing multi-discipline contractors.</li></ul><p><strong>Technical Skills:</strong></p><br><ul> <li>In-depth knowledge of subsystems, ITR, MC, RFCC, punch lists and system completion.</li> <li>Full command of HSE, ATEX, PtW, LoTo, safety inhibition and PSSR procedures.</li> <li>Strong understanding of process equipment, rotating, HV/LV electrical, F&amp;G, ESD/PSD and ICSS systems.</li> <li>Proficiency with completion management tools (ICAPS or equivalent).</li></ul><p><strong>Personal Qualities:</strong></p><br><ul> <li><strong>Leadership</strong>: Ability to challenge contractors and enforce priorities.</li> <li><strong>Adaptability:</strong> Comfort in fast-track, multicultural and high-pressure environments.</li> <li><strong>Rigor</strong>: Strong reporting discipline, documentation rigor and clear communication.</li> <li><strong>Diplomacy</strong>: Team spirit and diplomacy at Company / EPC / Vendor interfaces.</li></ul><p><strong>Languages:</strong></p><br><ul> <li>Fluent professional English (mandatory).</li> <li>French appreciated. Arabic is a plus.</li></ul><p><strong>Conditions:</strong></p><br><ul> <li>Site-based assignment in Iraq, Rotational.</li></ul> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Site Security Manager (SSM) is responsible for the management of all static guard and the implementation of all security SOPs pertaining to static operations. Oversees all security provisions and requirements in support of Company and Company employees and operations are met on a daily and as-required basis. Ensures static operations are conducted in accordance with Iraqi government, client and Control Risks directives and procedures.</p><p>Tasks and Responsibilities:</p><ul><li>Carry out all duties in support of the contractor PSM/SM.</li><li>Manage all Static Guard personnel.</li><li>Responsible for the readiness and deployment of the static guard force.</li><li>Oversee and co-ordinate all Static Guard activities in support of the company operations on a daily and as required</li><li>Maintain constant communications with the SCCC.</li><li>Ensure that full training and personnel records are maintained for all Static Guard personnel.</li><li>Respond to emergency calls and tasks as required.</li><li>Ensure that all Static Guard rotational leave and sick patterns are implemented.</li><li>Develop reporting procedures for security incidents in line with company requirements.</li><li>Overall management of site security and safety systems to identify any deficiencies.</li><li>Participate in and coordinate the security response to emergency calls.</li><li>Provision of assistance and support to the APT as required.</li><li>Ensuring assessment and accurate maintenance of records on the training database and producing reports as directed in the training directive.</li></ul><p>Application Closing Date: Monday, 20 July 2026 Start Date: 01 August 2026 Rotation: 6 weeks on / 6 weeks off Salary: will be discussed during the interview *INTERNAL APPLICANTS ONLY*</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><h2>Knowledge and experience:</h2><h3>Essential</h3><ul><li>6 years cumulative military/police service or equivalent commercial security and risk management experience.</li><li>2 years previous experience of working in Iraq for a MOI registered PSC.</li><li>Demonstrated competence over a minimum of 1 year in a previous PSC operations management role.</li><li>Attended and passed an internationally regarded military Non-Commissioned Officer or similar organizational command and leadership course, such as the British Army Platoon Sergeants Battle Course (or higher).</li></ul><h3>Preferred</h3><ul><li>Operational APT experience in Iraq or similar environment</li><li>Security and Risk Management qualification</li><li>Knowledge of and exposure to oil and gas sector</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><span >Versar Global Solutions is seeking a Security Assistance Mentor and Cultural Advisor (SAMA) Ministry of Defense (MoD) to support the United States Military Group Iraq (USMILGP-Iraq) mission. The SAMA MoD will advise and assist senior Ministry of Defense officials and USMILGP-Iraq personnel at the ministerial level, supporting the development of engagement strategies, operational coordination, decision-making processes, information sharing, and continued functional development of an effective Iraqi Ministry of Defense. This role requires deep knowledge of Iraqi defense structures, civil-military relations, Arabic language proficiency, and the ability to build trusted professional and cultural relationships with senior Iraqi counterparts. *This position is contingent upon award.</span></p><p>Serve as an advisor to senior Iraqi Ministry of Defense officials and assist USMILGP-Iraq in managing and executing duties at the ministerial level. Advise and assist USMILGP-Iraq with the development of ministerial engagement strategies that enhance the systemic capability and continued functional development of an effective Iraqi Ministry of Defense. Support the development of strategies that facilitate timely and effective decision-making and information sharing through daily observation and written reporting. Develop solid professional and cultural relationships with senior MoD officials and other ministries and agencies to further USMILGP-Iraq efforts and foster sound working relationships with Iraqi counterparts. Maintain daily and frequent personal contact with MoD leadership and officials to establish relationships built on trust, confidence, and confidentiality. Assist in the development, implementation, and oversight of policies and procedures that enhance personal and professional effectiveness in the execution of official duties. Advise on the integration of military and civilian elements of the Ministry Headquarters. Manage operational and administrative planning requirements, including suspenses, schedules, and strategic and operational plans. Support the development of a daily operating rhythm to meet requirements within available resources. Develop and schedule key leader engagement strategies to enhance advisor effectiveness, leverage systematic improvement in USMILGP-Iraq capabilities, and support coordination at the highest levels of leadership. Prepare and deliver briefings to senior military officials on the status of MoD staff, systems, programs, and transition progress.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor's degree required; master's degree in Middle Eastern Studies, Middle Eastern Culture, or a related field is highly preferred.</li><li>Fluent in English and Arabic, both written and spoken.</li><li>Possess a sound and current working knowledge of Ministry of Defense organizational structure and operations.</li><li>Previous strategic experience with U.S. Forces in Iraq since 2011 as a civilian contractor or uniformed service member.</li><li>Significant knowledge, education, and experience in civil-military relations within a democratic government.</li><li>One year or more of experience working with Iraqi Ministry of Defense officials is highly preferred.</li><li>Knowledge of Iraqi customs, culture, political structures, and cultural sensitivities, with the ability to adapt communication, advisory, and training approaches accordingly.</li><li>Excellent written, oral, interpersonal, and verbal communication skills.</li><li>Proficient in operating a personal computer and experienced in Microsoft Office software, including Outlook, Word, Excel, and PowerPoint.</li><li>Ability to deploy to and work in Iraq in support of mission requirements.</li><li>For U.S. Citizens, must complete deployment processing through an approved Continental United States (CONUS) Replacement Center (CRC), including required deployment training at designated CONUS deployment centers such as the CRC at Fort Bliss, Texas, and redeployment through such centers.</li><li>Ability and willingness to travel internationally in support of mission needs, including movement by Embassy Air, Department of State Charter Air, secure ground transportation, and military air movements via rotary-wing and fixed-wing aircraft, as required.</li><li>Must possess a valid passport with at least 18 months of remaining eligibility at the time of deployment.</li><li>Successful results of preemployment screenings, including federal background check, MVR, and drug screen.</li><li>Comply with company drug and alcohol policy.</li><li>Be authorized to work in the US or will be authorized by the successful candidate's start date.</li><li>Eligibility Requirement - US Citizen (This requirement is necessary to meet the security and eligibility requirements for the performance of this contract).</li><li>Active Secret clearance.</li></ul><p>The position will primarily work onsite in Iraq in support of USMILGP-Iraq mission requirements. Primary duty locations may include Baghdad and/or Erbil, Iraq. In addition, the position may designate other temporary duty (TDY) locations, including but not limited to sites in the Middle East and the United States.</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><strong>Job Purpose:</strong></p><br><p>The Site Security Manager (SSM) is responsible for the management of all static guard and the implementation of all security SOPs pertaining to static operations. Oversees all security provisions and requirements in support of Company and Company employees and operations are met on a daily and as-required basis. Ensures static operations are conducted in accordance with Iraqi government, client and Control Risks directives and procedures. </p><br><p><strong>Tasks and Responsibilities:</strong></p><br><ul><li>Carry out all duties in support of the contractor PSM/SM. </li><li>Manage all Static Guard personnel. </li><li>Responsible for the readiness and deployment of the static guard force.</li><li>Oversee and co-ordinate all Static Guard activities in support of the company operations on a daily and “as required”</li><li>Maintain constant communications with the SCCC.</li><li>Ensure that full training and personnel records are maintained for all Static Guard personnel. </li><li>Respond to emergency calls and tasks as required. </li><li>Ensure that all Static Guard rotational leave and sick patterns are implemented. </li><li>Develop reporting procedures for security incidents in line with company requirements. </li><li>Overall management of site security and safety systems to identify any deficiencies. </li><li>Participate in and coordinate the security response to emergency calls. </li><li>Provision of assistance and support to the APT as required. </li><li>Ensuring assessment and accurate maintenance of records on the training database and producing reports as directed in the training directive. </li></ul><p><strong>Application Closing Date: </strong>Monday, 20 July 2026</p><br><p>Start Date: 01 August 2026</p><br><p>Rotation: 6 weeks on / 6 weeks off</p><br><p>Salary: will be discussed during the interview</p><br><p>*INTERNAL APPLICANTS ONLY*</p><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Electrical &amp; Instrumentation (E&amp;I) Engineer will be based on-site in Basra, Iraq, and will be responsible for supervising and executing electrical and instrumentation installation works for an EPC oil &amp; gas construction project. The role ensures that all site activities are performed safely, in compliance with approved drawings, project specifications, international standards, and HSE requirements.</p><p><br></p><p>The E&amp;I Engineer will coordinate closely with construction, QA/QC, engineering, commissioning teams, and subcontractors to ensure proper installation, testing, pre-commissioning, and timely project delivery while maintaining quality, safety, and schedule objectives throughout the project lifecycle.</p><p><br></p><ul><li><p>Supervise and execute all electrical installation activities including MV/LV systems, transformers, switchgear, MCCs, distribution panels, UPS systems, and associated power infrastructure in accordance with approved drawings and project specifications.<br></p></li><li><p>Monitor and control cable tray installation, cable pulling, glanding, termination, and testing activities, ensuring compliance with method statements, ITPs, and international standards.<br></p></li><li><p>Ensure proper installation of earthing and grounding systems, lightning protection systems, and hazardous area electrical equipment (Ex-rated equipment) as per project and safety requirements.<br></p></li><li><p>Supervise installation of field instrumentation including pressure, temperature, flow, and level transmitters, control valves, analyzers, junction boxes, and marshalling cabinets.</p></li></ul><br><ul><li><p>Oversee instrument tubing works, impulse line installation, supports, tagging, and identification to ensure alignment with engineering drawings and hook-up details.<br></p></li><li><p>Support loop checking, calibration, pre-commissioning, and commissioning activities in coordination with the commissioning team and client representatives.</p><br></li><li><p>Review and interpret technical documents including single line diagrams (SLDs), wiring diagrams, hook-up drawings, cable schedules, and layout drawings to ensure accurate site execution.</p></li></ul><br><ul><li><p>Coordinate with construction, QA/QC, engineering, and subcontractor teams to resolve technical issues and ensure smooth workflow and timely project execution.</p></li></ul><br><ul><li><p>Ensure all installation works are performed in compliance with project specifications, international standards (IEC, NEC, API where applicable), and contractual requirements.</p></li></ul><br><ul><li><p>Participate in inspections, raise RFIs where required, support punch list clearance, and ensure proper documentation and as-built records are maintained.</p></li></ul><br><ul><li><p>Enforce strict adherence to HSE policies, conduct risk assessments, participate in toolbox talks, and ensure safe execution of works within live plant or hazardous areas.</p></li></ul><br><ul><li><p>Monitor daily site progress, report to the Construction Manager /Project Manager, and ensure activities are completed within approved schedules and cost parameters</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor's degree in Electrical Engineering, or a related field</p></li><li><p>Experience working on oil and gas EPC projects</p></li><li><p>Strong understanding of oil and gas process systems and equipment, with a focus on flare gas recovery systems.</p></li><li><p>7-10 years experience in static, rotary equipment installation.</p></li><li><p>Knowledge of piping and general mechanical works.</p></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Serve as an advisor to senior Ministry of Peshmerga Affairs officials and assist USMILGP-Iraq in managing and executing duties at the ministerial level. Advise and assist USMILGP-Iraq with the development of ministerial engagement strategies that enhance the systemic capability and continued functional development of an effective Ministry of Peshmerga Affairs. Support the development of strategies that facilitate timely and effective decision-making and information sharing through daily observation and written reporting. Develop solid professional and cultural relationships with senior MoPA officials and other ministries and agencies to further USMILGP-Iraq efforts and foster sound working relationships with Iraqi Kurdish counterparts. Maintain daily and frequent personal contact with MoPA leadership and officials to establish relationships built on trust, confidence, and confidentiality. Assist in the development, implementation, and oversight of policies and procedures that enhance personal and professional effectiveness in the execution of official duties. Advise on the integration of military and civilian elements of the Ministry Headquarters. Manage operational and administrative planning requirements, including suspenses, schedules, and strategic and operational plans. Support the development of a daily operating rhythm to meet requirements within available resources. Develop and schedule key leader engagement strategies to enhance advisor effectiveness, leverage systematic improvement in USMILGP-Iraq capabilities, and support coordination at the highest levels of leadership. Prepare and deliver briefings to senior military officials on the status of MoPA staff, systems, programs, and transition progress.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelor's degree required; master's degree in Middle Eastern Studies, Middle Eastern Culture, Kurdish Studies, or a related field is highly preferred. Fluent in English and Kurdish, both written and spoken. Possess a sound and current working knowledge of Ministry of Peshmerga Affairs organizational structure and operations. Previous strategic experience with U.S. Forces in Iraq since 2011 as a civilian contractor or uniformed service member. Significant knowledge, education, and experience in civil-military relations within a democratic government. One year or more of experience working with Ministry of Peshmerga Affairs officials is highly preferred. Knowledge of Iraqi Kurdish customs, culture, political structures, and cultural sensitivities, with the ability to adapt communication, advisory, and training approaches accordingly. Excellent written, oral, interpersonal, and verbal communication skills. Proficient in operating a personal computer and experienced in Microsoft Office software, including Outlook, Word, Excel, and PowerPoint. Ability to deploy to and work in Iraq in support of mission requirements. For U.S. Citizens, must complete deployment processing through an approved Continental United States (CONUS) Replacement Center (CRC), including required deployment training at designated CONUS deployment centers such as the CRC at Fort Bliss, Texas, and redeployment through such centers. Ability and willingness to travel internationally in support of mission needs, including movement by Embassy Air, Department of State Charter Air, secure ground transportation, and military air movements via rotary-wing and fixed-wing aircraft, as required. Must possess a valid passport with at least 18 months of remaining eligibility at the time of deployment. Successful results of preemployment screenings, including federal background check, MVR, and drug screen. Comply with company drug and alcohol policy. Be authorized to work in the US or will be authorized by the successful candidate's start date. Eligibility Requirement - US Citizen (This requirement is necessary to meet the security and eligibility requirements for the performance of this contract). Active Secret clearance.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Responsible of RNCs, BSCs, transport (IP &amp; Microwave), CME/power maintenance in addition to Operation &amp; maintenance for all sites in area which including all bands 2G,3G &amp; LTE.</p><p>1-Site configuration of parameters to follow RF requests, modify TR equipment s, and work on NET echo</p><p>2-Field troubleshooting &amp; fix problem for both TR Microwave, RAN and CME/Power.</p><p>3-Support to the other department upon requests.</p><p>4-Daily Check all BTS &amp; MW, CME clearance alarm, close TKT &amp; resolving and following up all pending issues.</p><p>5-Acceptance and on-air new sites or expansions.</p><p>6-Daily task O&amp;M follow up.</p><p>7- follow up CME maintenance subcontractor</p><p>8-Team work &amp; CR implementations.</p><p>9-Network performances &amp; KPI with outage follow up.</p><p>10-Daily report to Cluster Supervisor.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"><b>B.sc degree (Telecommunication Engineering or Electrical Engineering or equivalent degree).</b><br><b>3-5 years experience</b><br><b>Having a valid Engineer's union ID Card</b><br><br><b>Behavioral Competencies:</b><br></p><ul><li>Delivering Results &amp; Fostering Ownership</li><li>Building Customer Value</li><li>Networking &amp; Influencing Collaboratively</li><li>Leading Teams</li><li>Driving Change</li></ul><br><b>Technical Competencies:</b><br><ul><li>Access Network Operations</li><li>Network Monitoring</li><li>Problem Solving</li><li>Service Operations Center (SOC)</li><li>Technical Writing and Reporting</li><li>Troubleshooting &amp; Technical Problem Solving</li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Important Employment Information This role is located in Baghdad and will be hired through a third-party employment provider, as Atlas Copco does not maintain a legal entity or Customer Center in the country. While administrative processes such as contracts and payroll will be handled externally, your day-to-day operations will be fully connected to the Turkiye Customer Center, reporting to the Business Line Manager in Turkiye. Your role As an Area Sales Engineer, your mission is to develop sales and market our products in Baghdat Iraq by leveraging your technical expertise and understanding of customer needs. You will report to the Business Line Manager and work closely with product teams to ensure successful execution of sales strategies. You will: Establish and manage channel partners through the distribution network. Conduct market research and identify opportunities in the assigned region. Generate product requirements and determine regional specifications. Coordinate production timetables, pricing, and plans for product introduction. Develop marketing strategies and manage dealer relationships. Deliver product training and support after-sales activities. Drive sales for Portable Compressors, Handheld Tools, Generators, Pumps, and Light Towers and Aftermarket Products. To succeed, you will need You have: 3+ years of experience working as a Sales Engineer or in a similar technical-commercial role. A university degree in Engineering, Marketing, or Business Management (preferably mechanical, electrical, or industrial engineering) Non-negotiable skills: Strong technical know-how and marketing knowledge. Ability to develop and execute sales strategies, including dealer management and channel development. Fluency in English (written and verbal) and a valid local driving license. Preferred skills: Experience in market research and determining customer needs through data collection and analysis. Ability to recommend product scope, review specifications, and appraise new product ideas or packaging changes. Skilled in competitor analysis and defining product marketing communication objectives. Experience in preparing short- and long-term sales forecasts, special reports, and answering management requests. Ability to manage inventory turnover and product availability through forecasting and production schedule alignment. Expertise in pricing strategies using market research data and cost analysis for customized orders. Familiarity with digitalization tools and platforms for product development, sales, and marketing activities. Strong understanding of product management and value creation principles. Excellent presentation, communication, and relationship-building skills. Advanced computer skills (MS Office) and adaptability to new technologies. Additional responsibilities include: Regular dealer and end-user visits, product training, and after-sales support. Selling and promoting service products (e.g., maintenance parts, kits, lubricants). Building and maintaining strong business relationships with customers and distributors. Maintaining professional and technical knowledge by attending workshops, reviewing publications, and networking. Contributing to team efforts and performing other duties as directed by management. In return, we offer Culture of trust and accountability Lifelong learning and career growth Innovation powered by people Comprehensive compensation and benefits Health and well-being Job location This role is fully remote, enabling you to work from anywhere within the region of Baghdad, while being associated with our customer center in Turkiye.</span> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Job Title: Control System Specialist Engineer<br> Location: Basra, Iraq<br> Duration: 12 months with possible extension.<br> Renumeration: Competitive day rate + Flight + Accommodation<br> 28x28 Rotation<br> <br> Department: This role will be reporting into the Maintenance &amp; Engineering team.<br> <br> The control systems engineer shall report to Instrument &amp; Control Team Lead and will be an integral member of a multi-discipline Engineering Department.<br> &nbsp;Responsibilities shall include:<ul><li>Provide technical control and safety system engineering support to client departments in the execution of brownfield and greenfield development projects, construction, operations and maintenance groups.</li><li>Participate in conceptual, basic, and detailed design activities.</li><li>Provide assurance on engineering compliance against pertinent standards, specifications, codes and regulations. Ensure that non-conformities and deviations are identified, risk assessed and mitigated.</li><li>Provide response to engineering and site queries in line with client specifications and best engineering practices.</li><li>Provide technical input to client management of change process. Carry out site surveys. Produce design and instrument, control and safety system work pack deliverables. Contents to include scopes of work, design/construction drawings, design calculations, system architecture, network configuration, control narrative, software design specification, HMI specification, alarm configuration, system I/O allocation, MTOs, task hazard assessments.</li><li>Provide support to develop and execute strategies to upgrade and expand existing control /safety systems.&nbsp;</li><li>Review and approve third-party engineering deliverables.</li><li>Produce material requisitions, technical bid evaluations, interfacing with vendors via procurement department</li><li>Provide support to activity planning and progress reporting.</li><li>Liaise and work closely with client instrument technical authority for guidance as necessary</li><li>Attend system testing, FAT, SAT and conduct technical audit/verification</li></ul><br> <br> Qualification:<ul><li>Bachelor’s degree in Instrumentation/Control /Electronics engineering</li><li>15+ years relevant experience in control and safety system engineering, including the design and operation of processing systems in the oil and gas industry.</li><li>Functonal safety certified from TUV/Exida or similar organization.</li><li>Experience in onshore operations, emerging areas / multicultural environments. Relevant experience in successive roles includes problem analysis, solution proposal, related working procedure draft and implementation.</li><li>Experience of engineering role in detailed engineering design, procurement, construction and commissioning of PLC, DCS, ESD, FGS, RTU, SCADA, HMI and Historian.</li><li>Sound knowledge on system topology and control networks RS232/485/422, Modbus, Ethernet, TCP/IP, SafetyNet, Control Net, DH+ etc and network security.</li><li>Experience on digital/smart oil field instrumentation and network.</li><li>Hands on experience on Emerson Delta-V ICSS and Alen Bradley Control logix.</li><li>Candidate to demonstrate familiarity with all relevant industry codes, standards, and practices (IEC, IEEE, ISA, API, ISO), for instrumentation &amp; control systems.</li><li>Candidate to demonstrate good presentation and effective interdisciplinary communication skills, capability of communication with all levels, manages with different cultural background.</li></ul><br> If you would like to know more about this opportunity, please send your most updated CV to erica.balde@nesfircroft.com&nbsp;<br>With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil &amp; Gas, Power &amp; Renewables, Chemicals, Construction &amp; Infrastructure, Life Sciences, Mining and&nbsp;Manufacturing&nbsp;sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients. <br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Lead Process Engineer<br><br><p><b>Job Description</b></p><br><br><br><p><b>Position: Lead Process Engineer</b></p><br><br><p><b>Company: KBR </b></p><br><br><p><b>Project: Majnoon</b></p><br><br><p><b>Location: Basra. 28/28 rotation</b></p><br><br><br><p><b><i>"Belong, Connect, Grow, with KBR!</i></b></p><br><br><br><p><b><i>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</i></b></p><br><br><br><p><b><i>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets."</i></b></p><br><br><br><p><b>Position: Lead Process Engineer</b></p><br><br><p><b>Company: KBR </b></p><br><br><p><b>Project: Majnoon</b></p><br><br><p><b>Location: Basra. 28/28 rotation</b></p><br><br><br><p><b>Job Purpose</b></p><br><br><p>The Lead Process Engineer will own the technical integrity and successful delivery of process engineering scope across projects at different stages (Conceptual Studies, Front-End Design (FEED), and Detailed Engineering) for oil and gas field developments, including upstream offshore/onshore, gas treating, and downstream processing, in greenfield and brownfield environments. This role leads a team of engineers within a multidisciplinary project team, ensuring compliance with industry standards and project specifications, driving technical excellence, and fostering the development of Iraqi national staff.</p><br><br><br><p><b>Job Responsibilities</b></p><br><br><ul><li>Lead the preparation and review of process simulations and optimization studies for select/appraise stage projects, and champion the development of Process Flow Schemes with heat and mass balances, equipment sizing, layout, etc., for costing and option selection.</li><li>Own the detailed process engineering deliverables across all design phases, including Process Flow Diagrams, Piping &amp; Instrumentation Diagrams, Equipment Datasheets, Study Reports/Manuals, etc., ensuring alignment with international standards and project requirements.</li><li>Oversee the review of process design work by third parties (vendors) and other offices; champion participation in HAZIDs, HAZOPs, SIL, Hazard Analysis reviews, and audits; ensure timely issue resolution and closure.</li><li>Act as the primary technical interface with clients, communicating complex concepts clearly in both written and verbal formats; manage client expectations and confirm technical commitments.</li><li>Mentor and actively develop Iraqi national staff to fulfill process engineering roles, providing structured on-the-job training, performance feedback, and growth opportunities.</li><li>Ensure adherence to office quality and safety systems; lead the implementation of quality assurance/quality control practices within the process discipline.</li><li>Collaborate with other disciplines to drive on-time, efficient, and safe project delivery; lead technical risk management and issue resolution within the process scope.</li><li>Lead the technical supervision of FEED and Detailed Engineering activities for offshore/onshore greenfield/brownfield projects, ensuring design integrity and constructability.</li><li>Support procurement activities by providing authoritative technical input for equipment selection and vendor evaluation, including evaluation of bid technical clarifications.</li><li>Participate in commissioning and start-up activities, providing seasoned technical support and facilitating smooth handover to operations.</li></ul><br><p><b>Functional Responsibilities</b></p><br><br><ul><li>Maintain and further develop process engineering standards, best practices, and technical governance within the project teams.</li><li>Lead risk assessments and develop comprehensive mitigation strategies for process-related issues; own the risk register for the process discipline.</li><li>Ensure timely delivery of all process engineering deliverables in accordance with project schedules; manage resource planning and workload distribution within the team.</li><li>Provide technical leadership in design reviews, technical compliance, and governance for all process workstreams.</li><li>Support and guide procurement activities with robust technical input for equipment specifications, vendor selection, and qualification.</li><li>Lead commissioning and start-up activities from a process perspective, delivering technical support, commissioning procedures, and start-up readiness reviews.</li></ul><br><p><b>Technical Skills</b></p><br><br><ul><li>Extensive experience in FEED and Detailed Engineering design for offshore/onshore greenfield/brownfield projects.</li><li>Proficiency in process simulation software (e.g., Aspen HYSYS, Flare System Analyzer, ProMax, Pipesim, Pipenet, others).</li><li>Strong knowledge of process safety management and hazard analysis techniques.</li><li>Familiarity with relevant industry codes and standards (e.g., API, ASME, ISO).</li><li>Experience with process control systems and instrumentation.</li></ul><br><p><b>Soft Skills</b></p><br><br><ul><li>Leadership and team management skills.</li><li>Strong communication and interpersonal skills.</li><li>Ability to work collaboratively in a multidisciplinary environment.</li><li>Problem-solving mindset with a focus on innovation and efficiency.</li><li>Adaptability to changing project requirements and priorities.</li></ul><br><p><b>Qualifications</b></p><br><br><ul><li>Mandatory:&nbsp;Bachelor’s degree in engineering (Chemical, Process, or related field).</li><li>Preferred:&nbsp;Master’s degree in engineering (Chemical, Process, or related field) and/or membership of internationally accepted applicable professional Institute.</li><li>10 years of experience in process engineering within engineering Contractors, with a focus on FEED and EPC design for upstream onshore/offshore greenfield/brownfield projects.</li></ul><br><p><b>Work Environment</b></p><br><br><p>The role will be based in Iraq, requiring collaboration with local and international teams. The work environment is dynamic and fast-paced, necessitating flexibility and a proactive approach to challenges.</p><br><br><br><br><br><br><br> </div>

<p>Job Responsibilities:</p><p>1. Review installation quality of ATC equipment and complete pre-power-on acceptance; verify power supply, signal links and earthing systems to meet civil aviation standards for equipment power-on commissioning.</p><p>2. Conduct standalone power-on, hardware self-test, program loading, parameter configuration and functional commissioning for VHF air-ground communication, intercom dispatching, ATC recording, secondary radar surveillance, surface surveillance and ATC automatic processing systems.</p><p>3. &nbsp;Perform cross-discipline joint commissioning across multiple systems to realize data interconnection, business linkage and signal synchronization among ATC automation, radar surveillance, air-ground communication and dispatching intercom systems.</p><p>4. Test main/standby redundancy switching, fault alarms, emergency switchover and business fault tolerance functions to ensure uninterrupted air traffic control operations.</p><p>5. Support flight calibration of ATC systems, track calibration parameters, optimize equipment settings and rectify non-compliant items to align with civil aviation operational technical standards.</p><p>6. &nbsp;Provide on-site support during the trial operation of full ATC systems; real-time monitor radar targets, air-ground communication channels, automated flight tracks and dispatching workstation status.</p><p>&nbsp;</p><p>Job Requirements:</p><p>1. Bachelor’s degree or above, major in Electrical Engineering, Automation or related fields; graduates from 985/211 universities are preferred.</p><p><strong>2. </strong>Fluent in English.</p><p><strong>3. </strong>3Minimum 3–5 years of commissioning and operational experience on at least one 4D or higher-class civil aviation airport.</p><p><strong>4. </strong>4Proficient in technical standards and specifications issued by ICAO (International Civil Aviation Organization) and CAAC (Civil Aviation Administration of China).</p><p><strong>5. </strong>Capable of multi-system interface coordination; able to resolve issues involving system communication, protocol docking and building automation.</p><p><strong>6. </strong>Experience in commissioning weak current systems, information integration, BHS baggage handling, security inspection, ATC, meteorology and related systems.</p><p>&nbsp;</p><p><strong>7. </strong>Strong communication and coordination skills, high sense of responsibility, excellent execution and team spirit.8. Good physical health and willingness to work overseas.</p>

<p>Requirements &amp; Summary</p><ul><li>Skills : Process Management , Process Engineer</li><li>Other Skills : Process Safety Engineer, Safety Engineer, QAR, RAM, FEED, detailed design, safety-critical systems, process safety and risk management</li><li>Experience : 20 + Years</li><li>Education : Bachelors/3-5 yr Degree</li><li>Employment Type : Full Time Salaried Employee</li><li>Location : Iraq, Iraq</li></ul><p>Qualifications and Experience</p><ul><li>Education: Bachelor degree and above in Chemical Engineering or related discipline.</li><li>Experience: Minimum 20 years of experience in process safety and risk management for large oil, gas, or refining projects.</li><li>Technical Background: Strong expertise in process safety studies, QRA, RAM, safety-critical systems, and international safety standards.</li></ul><p>Competencies:</p><ul><li>Ability to integrate safety across disciplines and project phases</li><li>Strong analytical and risk assessment skills</li><li>Experience in multi-contractor project environments</li></ul><p>The Senior Process Safety Engineer is responsible for the governance and management of all process safety, risk management, and loss prevention activities throughout the full lifecycle of the integrated project. Acting on behalf of the Owner within the PMT, this role ensures that safety considerations are embedded in site selection, layout development, FEED, detailed design, construction, commissioning, and start-up. The Senior Process Safety Engineer oversees all safety studies, risk assessments, and safety-related design reviews, and ensures alignment with international standards, regulatory requirements, and Owner safety philosophy. The role includes oversight of PMC safety resources and coordination of safety inputs across all contractors and licensors.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Education: Bachelor degree and above in Chemical Engineering or related discipline.</li><li>Experience: Minimum 20 years of experience in process safety and risk management for large oil, gas, or refining projects.</li><li>Technical Background: Strong expertise in process safety studies, QRA, RAM, safety-critical systems, and international safety standards.</li><li>Competencies:</li><ul><li>Ability to integrate safety across disciplines and project phases</li><li>Strong analytical and risk assessment skills</li><li>Experience in multi-contractor project environments</li></ul></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Lead Interface Engineer<br><br><p><b>Job Description</b></p><br><br><p>Division: CSSP (Ratawi Hub – Iraq) </p><br><br><p>Direction&nbsp;: IM</p><br><br><p><b>Job title: Lead Interface Engineer</b></p><br><br><p><b>Situation in organization</b></p><br><br><p>Within the Project Organization, the Lead Interface Engineer is reporting to the Interface Manager</p><br><br><p>Job Location(s): CPP Office (Abu Dhabi, UAE) during Detailed Engineering Phase / SITE (Iraq) during Construction Phase</p><br><br><p><b>Job dimensions</b></p><br><br><p>The Lead Interface Engineer shall assist the Interface Manager on the following:</p><br><br><ul><li>take care of the overall Management of interface and data changes between stakeholders of the Common Seawater Supply Project, and provide advice on any schedule &amp; commercial issues arising from such interfaces and changes</li><li>ensure that Interfaces Management procedures are in place and that EPC and other contractors implement the required interface management system throughout the project duration</li></ul><p>The Lead Interface Engineer is anticipated to start early 2026 and will be based in Abu Dhabi (UAE).</p><br><br><p><b>Activities</b></p><br><br><p>The job holder shall assist the Interfaces Manager:</p><br><br><ul><li>with the support of the Project Management Consultant, define, implement and maintain the methodology/procedure to be applied and the corresponding database to be created, to ensure a clear and accurate identification and management of interfaces. This procedure will be as efficient and simple as possible and will be used throughout the life of the project and shall be applied by the different entities/ Contractors.</li><li>Management of interface and change data between parties, monitor and control interface and change issues, in order to resolve interface and change issues in a timely and organised manner according to the project interface and change control procedures.</li><li>Attend major interface meetings, internal and external with other entities of CSSP Project, Contractor representatives, Vendors, TotalEnergies specialists, Partner’s experts, etc. Lead interface and other technical meetings as required.</li><li>Ensure that HSE requirements are systematically considered all along the interface management process and in particular that interfaces are properly addressed during HAZID/HAZOP/PTR project audits.</li><li>Consolidate and advise the Project Director and Technical and Project Control Managers of any risks specially schedule &amp; commercial issues arising from interfaces and changes. Shall be the coordinator of the Management of Change, providing the justification through all disciplines of the change. Ensure complete documentation of all changes, and communication of these in compliance with the processes agreed with BOC and regulatory authorities.</li><li>Preparing technical papers to support management positions for clarifications / decisions with regulatory authorities of host countries, other entities or partners.</li><li>Ensure that EPC Contractor implements required interface management system &amp; resources and monitor throughout the project duration that EPC Contractor honours its responsibilities as defined in the project interface procedure.</li><li>Ensure the implementation of interface changes/optimisations resulting from negotiations of the external interfaces.</li><li>Together with Project Management Consultant, ensure design consistency and continuity throughout the facilities.</li><li>Avoid change orders and delays caused by interface issues; ensure timely follow-up of interface issues.</li><li>Assist the Project Management Consultant, prior to and during construction phase, by anticipating operational interfaces with other parties (clashes or conflicting program).</li><li>In case of SIMOPS (phased delivery of the plant): propose solutions and participate to definition and resolution.</li></ul><p><b>Context and environment</b></p><br><br><br><p>Basrah Oil Company (BOC) is undertaking the Seawater Treatment Facilities (STF) project to provide treated seawater to the oil fields in southern Iraq (for injection). The STF will be located on the west side of the Khor Al Zubair, upstream of the port of Umm Qasr and will have the following key components:</p><br><br><ul><li>Site development and non-process facilities.</li><li>Ancillaries and buildings.</li><li>Seawater intake and outfall structures.</li><li>Material off-loading facility.</li><li>Seawater clarification, filtration and deoxygenating processes.</li><li>Chemical addition systems.</li><li>Shipping pumps.</li><li>Power Generation.</li><li>Utilities.</li></ul><p>FEED was completed (June 2016) with Phase 1 capacity of 7.5 million barrels of water per day (MMBWPD) of treated seawater, with a subsequent Phase 2 of 5 MMBWPD for a total buildout capacity of 12.5 MMBWPD. The project was placed on hold upon the completion of FEED.</p><br><br><p>In 2018 BOC launched a call for tender on the FEED, but instructed bidders to reduce capacity to 5.0 MMBWPD, with provision for a future addition of 2.5 MMBWPD for a total build-out phase of 7.5 MMBWPD.</p><br><br><br><p><b>Accountabilities</b></p><br><br><ul><li>Accountable for the interfaces and MoC, being internal (between units, disciplines, PMT, One Tech and Specialists) or external (between other CSSP Projects, Contractors, COMPANY, etc…). The job holder coordinates all interface and MoC matters, protecting the WI Project and COMPANY’s position with regards to all external interfaces and to internal interfaces between Contractors, and ensuring that changes are evaluated and executed for the overall benefit of the Project.</li><li>Accordingly, the job holder shall make the necessary coordination between all involved Contractors/parties and Company Teams and implement an agreed interface management procedure and methodology. She/He shall ensure the proper and timely follow-up and resolution of interfaces issues between the various involved parties documents. She/He must support the Interface Manager to ensure full control of the Management of Change process, and shall document all the changes, taking care to perform a full review with various disciplines with Project aspects to justify or reject the change.</li><li>A key aspect of interface coordination is the ability to effectively communicate, across all involved parties, all details related to an interface, including requirements, technical specifications, and potential issues. It is important that the communication channel is promptly established, the proper information is exchanged, and all involved parties acknowledge that they fully understand the interface requirements.</li><li>The nature of the development might call for a “staged” delivery of the facilities. Simultaneous activities between construction activities and operations activities can occur to meet the agreed schedule.</li></ul><br><p><b><u>Qualification:</u></b></p><br><br><ul><li><span>Degree in</span> Engineering</li></ul><p><b><u>Experience: </u></b></p><br><br><ul><li>15 years of relevant experience in Industrial Projects.</li><li>A sound multi-discipline technical background complemented by a sound knowledge on Onshore Surveys campaigns and civil works experience.</li><li>Very good communication and interpersonal skills and capacity to work in a “transverse” organisation.</li><li>Mastering English is a must, knowledge of French and Arabic is a plus.</li></ul><br><br><br><br><br> </div>

<p>The Water Injection Engineer will be responsible for designing, developing, and optimizing water injection systems to support enhanced oil recovery (EOR) and reservoir pressure maintenance. The role includes conducting hydraulic analysis and simulation modeling, monitoring system performance, optimizing injection efficiency, preparing engineering documentation, supporting commissioning and start-up activities, and ensuring compliance with HSE, environmental, and industry standards. The successful candidate will work closely with reservoir, production, and operations teams to improve field performance and mentor junior engineers.</p><p>Bachelor's degree in Petroleum Engineering, Chemical Engineering, Mechanical Engineering, or a related engineering discipline; a Master's degree is an advantage. Minimum of 10 years of experience in water injection engineering within the Oil & Gas industry. Strong expertise in enhanced oil recovery (EOR), reservoir pressure maintenance, hydraulic analysis, water treatment systems, pipeline hydraulics, and injection well performance. Proficient in Aspen HYSYS, PIPEPHASE, OLGA, or equivalent simulation software. Excellent analytical, project management, communication, and troubleshooting skills. Professional Engineer (PE) registration or equivalent certification is preferred.</p>

<p>The Water Injection Engineer will be responsible for designing, developing, and optimizing water injection systems to support enhanced oil recovery (EOR) and reservoir pressure maintenance. The role includes conducting hydraulic analysis and simulation modeling, monitoring system performance, optimizing injection efficiency, preparing engineering documentation, supporting commissioning and start-up activities, and ensuring compliance with HSE, environmental, and industry standards. The successful candidate will work closely with reservoir, production, and operations teams to improve field performance and mentor junior engineers.</p><p>Bachelor's degree in Petroleum Engineering, Chemical Engineering, Mechanical Engineering, or a related engineering discipline; a Master's degree is an advantage. Minimum of 10 years of experience in water injection engineering within the Oil & Gas industry. Strong expertise in enhanced oil recovery (EOR), reservoir pressure maintenance, hydraulic analysis, water treatment systems, pipeline hydraulics, and injection well performance. Proficient in Aspen HYSYS, PIPEPHASE, OLGA, or equivalent simulation software. Excellent analytical, project management, communication, and troubleshooting skills. Professional Engineer (PE) registration or equivalent certification is preferred.</p>