وظائف مهندس صناعي - البصره العراق

<p><h4>Division</h4> <p>CSSP (Ratawi Hub – Iraq)</p> <p><strong>Direction:</strong> IM</p> <p><strong>Situation in organization</strong><br> Within the Project Organization, the Lead Interface Engineer reports to the Interface Manager.</p> <p><strong>Job location(s):</strong> CPP Office (Abu Dhabi, UAE) during detailed engineering phase / site (Iraq) during construction phase.</p> <h4>Job dimensions</h4> <p>The Lead Interface Engineer shall assist the Interface Manager on the following:</p> <ul> <li>Take care of the overall management of interface and data changes between stakeholders of the Common Seawater Supply Project, and provide advice on any schedule and commercial issues arising from such interfaces and changes.</li> <li>Ensure that interface management procedures are in place and that EPC and other contractors implement the required interface management system throughout the project duration.</li> </ul> <p>The Lead Interface Engineer is anticipated to start early 2026 and will be based in Abu Dhabi (UAE).</p> <h4>Activities</h4> <p>The job holder shall assist the Interfaces Manager:</p> <ul> <li>With the support of the Project Management Consultant, define, implement and maintain the methodology/procedure to be applied and the corresponding database to be created, to ensure a clear and accurate identification and management of interfaces. This procedure will be as efficient and simple as possible and will be used throughout the life of the project and shall be applied by the different entities/contractors.</li> <li>Management of interface and change data between parties, monitor and control interface and change issues, in order to resolve interface and change issues in a timely and organised manner according to the project interface and change control procedures.</li> <li>Attend major interface meetings, internal and external with other entities of CSSP Project, contractor representatives, vendors, TotalEnergies specialists, partner’s experts, etc. Lead interface and other technical meetings as required.</li> <li>Ensure that HSE requirements are systematically considered all along the interface management process and in particular that interfaces are properly addressed during HAZID/HAZOP/PTR project audits.</li> <li>Consolidate and advise the Project Director and Technical and Project Control Managers of any risks, especially schedule and commercial issues arising from interfaces and changes. Shall be the coordinator of the Management of Change, providing the justification through all disciplines of the change. Ensure complete documentation of all changes, and communication of these in compliance with the processes agreed with BOC and regulatory authorities.</li> <li>Prepare technical papers to support management positions for clarifications or decisions with regulatory authorities of host countries, other entities or partners.</li> <li>Ensure that EPC Contractor implements required interface management system and resources and monitor throughout the project duration that EPC Contractor honours its responsibilities as defined in the project interface procedure.</li> <li>Ensure the implementation of interface changes/optimisations resulting from negotiations of the external interfaces.</li> <li>Together with Project Management Consultant, ensure design consistency and continuity throughout the facilities.</li> <li>Avoid change orders and delays caused by interface issues; ensure timely follow-up of interface issues.</li> <li>Assist the Project Management Consultant, prior to and during construction phase, by anticipating operational interfaces with other parties (clashes or conflicting program).</li> <li>In case of SIMOPS (phased delivery of the plant): propose solutions and participate in definition and resolution.</li> </ul> <h4>Context and environment</h4> <p>Basrah Oil Company (BOC) is undertaking the Seawater Treatment Facilities (STF) project to provide treated seawater to the oil fields in southern Iraq (for injection). The STF will be located on the west side of the Khor Al Zubair, upstream of the port of Umm Qasr and will have the following key components:</p> <ul> <li>Site development and non-process facilities.</li> <li>Ancillaries and buildings.</li> <li>Seawater intake and outfall structures.</li> <li>Material off-loading facility.</li> <li>Seawater clarification, filtration and deoxygenating processes.</li> <li>Chemical addition systems.</li> <li>Shipping pumps.</li> <li>Power generation.</li> <li>Utilities.</li> </ul> <p>FEED was completed (June 2016) with Phase 1 capacity of 7.5 million barrels of water per day (MMBWPD) of treated seawater, with a subsequent Phase 2 of 5 MMBWPD for a total buildout capacity of 12.5 MMBWPD. The project was placed on hold upon the completion of FEED.</p> <p>In 2018 BOC launched a call for tender on the FEED, but instructed bidders to reduce capacity to 5.0 MMBWPD, with provision for a future addition of 2.5 MMBWPD for a total build-out phase of 7.5 MMBWPD.</p> <h4>Accountabilities</h4> <p>Accountable for the interfaces and management of change (MoC), being internal (between units, disciplines, PMT, One Tech and specialists) or external (between other CSSP projects, contractors, company, etc.). The job holder coordinates all interface and MoC matters, protecting the WI Project and company’s position with regards to all external interfaces and to internal interfaces between contractors, and ensuring that changes are evaluated and executed for the overall benefit of the project.</p> <p>Accordingly, the job holder shall make the necessary coordination between all involved contractors/parties and company teams and implement an agreed interface management procedure and methodology. He/she shall ensure the proper and timely follow-up and resolution of interface issues between the various involved parties documents. He/she must support the Interface Manager to ensure full control of the Management of Change process, and shall document all the changes, taking care to perform a full review with various disciplines with project aspects to justify or reject the change.</p> <p>A key aspect of interface coordination is the ability to effectively communicate, across all involved parties, all details related to an interface, including requirements, technical specifications, and potential issues. It is important that the communication channel is promptly established, the proper information is exchanged, and all involved parties acknowledge that they fully understand the interface requirements.</p> <p>The nature of the development might call for a “staged” delivery of the facilities. Simultaneous activities between construction activities and operations activities can occur to meet the agreed schedule.</p> <h4>Qualification</h4> <ul> <li>Degree in engineering.</li> </ul> <h4>Experience</h4> <ul> <li>15 years of relevant experience in industrial projects.</li> <li>A sound multi-discipline technical background complemented by a sound knowledge on onshore surveys campaigns and civil works experience.</li> <li>Very good communication and interpersonal skills and capacity to work in a “transverse” organisation.</li> <li>Mastering English is a must, knowledge of French and Arabic is a plus.</li> </ul></p><p></p>

<p><h4>Division</h4> <p>CSSP (Ratawi Hub – Iraq)</p> <p><strong>Direction:</strong> IM</p> <p><strong>Situation in organization</strong><br> Within the Project Organization, the Lead Interface Engineer reports to the Interface Manager.</p> <p><strong>Job location(s):</strong> CPP Office (Abu Dhabi, UAE) during detailed engineering phase / site (Iraq) during construction phase.</p> <h4>Job dimensions</h4> <p>The Lead Interface Engineer shall assist the Interface Manager on the following:</p> <ul> <li>Take care of the overall management of interface and data changes between stakeholders of the Common Seawater Supply Project, and provide advice on any schedule and commercial issues arising from such interfaces and changes.</li> <li>Ensure that interface management procedures are in place and that EPC and other contractors implement the required interface management system throughout the project duration.</li> </ul> <p>The Lead Interface Engineer is anticipated to start early 2026 and will be based in Abu Dhabi (UAE).</p> <h4>Activities</h4> <p>The job holder shall assist the Interfaces Manager:</p> <ul> <li>With the support of the Project Management Consultant, define, implement and maintain the methodology/procedure to be applied and the corresponding database to be created, to ensure a clear and accurate identification and management of interfaces. This procedure will be as efficient and simple as possible and will be used throughout the life of the project and shall be applied by the different entities/contractors.</li> <li>Management of interface and change data between parties, monitor and control interface and change issues, in order to resolve interface and change issues in a timely and organised manner according to the project interface and change control procedures.</li> <li>Attend major interface meetings, internal and external with other entities of CSSP Project, contractor representatives, vendors, TotalEnergies specialists, partner’s experts, etc. Lead interface and other technical meetings as required.</li> <li>Ensure that HSE requirements are systematically considered all along the interface management process and in particular that interfaces are properly addressed during HAZID/HAZOP/PTR project audits.</li> <li>Consolidate and advise the Project Director and Technical and Project Control Managers of any risks, especially schedule and commercial issues arising from interfaces and changes. Shall be the coordinator of the Management of Change, providing the justification through all disciplines of the change. Ensure complete documentation of all changes, and communication of these in compliance with the processes agreed with BOC and regulatory authorities.</li> <li>Prepare technical papers to support management positions for clarifications or decisions with regulatory authorities of host countries, other entities or partners.</li> <li>Ensure that EPC Contractor implements required interface management system and resources and monitor throughout the project duration that EPC Contractor honours its responsibilities as defined in the project interface procedure.</li> <li>Ensure the implementation of interface changes/optimisations resulting from negotiations of the external interfaces.</li> <li>Together with Project Management Consultant, ensure design consistency and continuity throughout the facilities.</li> <li>Avoid change orders and delays caused by interface issues; ensure timely follow-up of interface issues.</li> <li>Assist the Project Management Consultant, prior to and during construction phase, by anticipating operational interfaces with other parties (clashes or conflicting program).</li> <li>In case of SIMOPS (phased delivery of the plant): propose solutions and participate in definition and resolution.</li> </ul> <h4>Context and environment</h4> <p>Basrah Oil Company (BOC) is undertaking the Seawater Treatment Facilities (STF) project to provide treated seawater to the oil fields in southern Iraq (for injection). The STF will be located on the west side of the Khor Al Zubair, upstream of the port of Umm Qasr and will have the following key components:</p> <ul> <li>Site development and non-process facilities.</li> <li>Ancillaries and buildings.</li> <li>Seawater intake and outfall structures.</li> <li>Material off-loading facility.</li> <li>Seawater clarification, filtration and deoxygenating processes.</li> <li>Chemical addition systems.</li> <li>Shipping pumps.</li> <li>Power generation.</li> <li>Utilities.</li> </ul> <p>FEED was completed (June 2016) with Phase 1 capacity of 7.5 million barrels of water per day (MMBWPD) of treated seawater, with a subsequent Phase 2 of 5 MMBWPD for a total buildout capacity of 12.5 MMBWPD. The project was placed on hold upon the completion of FEED.</p> <p>In 2018 BOC launched a call for tender on the FEED, but instructed bidders to reduce capacity to 5.0 MMBWPD, with provision for a future addition of 2.5 MMBWPD for a total build-out phase of 7.5 MMBWPD.</p> <h4>Accountabilities</h4> <p>Accountable for the interfaces and management of change (MoC), being internal (between units, disciplines, PMT, One Tech and specialists) or external (between other CSSP projects, contractors, company, etc.). The job holder coordinates all interface and MoC matters, protecting the WI Project and company’s position with regards to all external interfaces and to internal interfaces between contractors, and ensuring that changes are evaluated and executed for the overall benefit of the project.</p> <p>Accordingly, the job holder shall make the necessary coordination between all involved contractors/parties and company teams and implement an agreed interface management procedure and methodology. He/she shall ensure the proper and timely follow-up and resolution of interface issues between the various involved parties documents. He/she must support the Interface Manager to ensure full control of the Management of Change process, and shall document all the changes, taking care to perform a full review with various disciplines with project aspects to justify or reject the change.</p> <p>A key aspect of interface coordination is the ability to effectively communicate, across all involved parties, all details related to an interface, including requirements, technical specifications, and potential issues. It is important that the communication channel is promptly established, the proper information is exchanged, and all involved parties acknowledge that they fully understand the interface requirements.</p> <p>The nature of the development might call for a “staged” delivery of the facilities. Simultaneous activities between construction activities and operations activities can occur to meet the agreed schedule.</p> <h4>Qualification</h4> <ul> <li>Degree in engineering.</li> </ul> <h4>Experience</h4> <ul> <li>15 years of relevant experience in industrial projects.</li> <li>A sound multi-discipline technical background complemented by a sound knowledge on onshore surveys campaigns and civil works experience.</li> <li>Very good communication and interpersonal skills and capacity to work in a “transverse” organisation.</li> <li>Mastering English is a must, knowledge of French and Arabic is a plus.</li> </ul></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Wood is currently recruiting for a QC Piping Engineer to strengthen our team in Iraq. This is a full-time onsite position based in Basra, Iraq.</p><br><br> Wood is a global leader in consulting and engineering, helping to unlock solutions to critical challenges in energy and materials markets. We provide consulting, projects and operations solutions in 45 countries, employing around 25,000 people. www.woodplc.com<br> <b>Diversity Statement&nbsp;</b><br> We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.<br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Electrical &amp; Instrumentation (E&amp;I) Engineer will be based on-site in Basra, Iraq, and will be responsible for supervising and executing electrical and instrumentation installation works for an EPC oil &amp; gas construction project. The role ensures that all site activities are performed safely, in compliance with approved drawings, project specifications, international standards, and HSE requirements.</p><p><br></p><p>The E&amp;I Engineer will coordinate closely with construction, QA/QC, engineering, commissioning teams, and subcontractors to ensure proper installation, testing, pre-commissioning, and timely project delivery while maintaining quality, safety, and schedule objectives throughout the project lifecycle.</p><p><br></p><ul><li><p>Supervise and execute all electrical installation activities including MV/LV systems, transformers, switchgear, MCCs, distribution panels, UPS systems, and associated power infrastructure in accordance with approved drawings and project specifications.<br></p></li><li><p>Monitor and control cable tray installation, cable pulling, glanding, termination, and testing activities, ensuring compliance with method statements, ITPs, and international standards.<br></p></li><li><p>Ensure proper installation of earthing and grounding systems, lightning protection systems, and hazardous area electrical equipment (Ex-rated equipment) as per project and safety requirements.<br></p></li><li><p>Supervise installation of field instrumentation including pressure, temperature, flow, and level transmitters, control valves, analyzers, junction boxes, and marshalling cabinets.</p></li></ul><br><ul><li><p>Oversee instrument tubing works, impulse line installation, supports, tagging, and identification to ensure alignment with engineering drawings and hook-up details.<br></p></li><li><p>Support loop checking, calibration, pre-commissioning, and commissioning activities in coordination with the commissioning team and client representatives.</p><br></li><li><p>Review and interpret technical documents including single line diagrams (SLDs), wiring diagrams, hook-up drawings, cable schedules, and layout drawings to ensure accurate site execution.</p></li></ul><br><ul><li><p>Coordinate with construction, QA/QC, engineering, and subcontractor teams to resolve technical issues and ensure smooth workflow and timely project execution.</p></li></ul><br><ul><li><p>Ensure all installation works are performed in compliance with project specifications, international standards (IEC, NEC, API where applicable), and contractual requirements.</p></li></ul><br><ul><li><p>Participate in inspections, raise RFIs where required, support punch list clearance, and ensure proper documentation and as-built records are maintained.</p></li></ul><br><ul><li><p>Enforce strict adherence to HSE policies, conduct risk assessments, participate in toolbox talks, and ensure safe execution of works within live plant or hazardous areas.</p></li></ul><br><ul><li><p>Monitor daily site progress, report to the Construction Manager /Project Manager, and ensure activities are completed within approved schedules and cost parameters</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor's degree in Electrical Engineering, or a related field</p></li><li><p>Experience working on oil and gas EPC projects</p></li><li><p>Strong understanding of oil and gas process systems and equipment, with a focus on flare gas recovery systems.</p></li><li><p>7-10 years experience in static, rotary equipment installation.</p></li><li><p>Knowledge of piping and general mechanical works.</p></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Mechanical Engineer will be based on-site in Basra, Iraq, and will be responsible for supervising and executing mechanical installation works for static and rotary equipment within an EPC oil &amp; gas construction project. The role ensures that all installation activities are performed safely, in compliance with project specifications, approved drawings, international standards, and HSE requirements.</p><p><br></p><p>The Mechanical Engineer will coordinate closely with construction, QA/QC, piping, commissioning teams, and subcontractors to ensure proper installation, alignment, testing, and timely project delivery while maintaining quality and safety standards throughout the project lifecycle.</p><p><br></p><ul><li><p>Supervise installation of static equipment including pressure vessels, heat exchangers, columns, tanks, separators, and other process equipment in accordance with approved drawings and specifications.</p></li><li><p>Oversee installation, alignment, and grouting of rotary equipment including pumps, compressors, blowers, and package units as per manufacturer requirements and project standards.</p></li><li><p>Monitor piping installation works including supports, fit-up, routing, and hydrotest preparation to ensure compliance with approved isometrics and piping layouts.</p></li><li><p>Verify equipment foundation preparation, anchor bolt positioning, and base plate leveling prior to equipment erection.</p></li><li><p>Ensure proper execution of cold and hot alignment, shaft alignment, and pre-commissioning mechanical checks for rotating equipment.</p></li><li><p>Review mechanical drawings such as GA drawings, P&amp;IDs, isometrics, vendor drawings, and method statements to ensure correct site implementation.</p></li><li><p>Coordinate with QA/QC for inspections, material verification, NDT requirements, hydrostatic testing, and mechanical completion documentation.</p></li><li><p>Interface with other disciplines including E&amp;I and civil teams to ensure proper coordination of mechanical installations.</p></li><li><p>Ensure compliance with international standards such as ASME, API, and project technical specifications.</p></li><li><p>Support pre-commissioning and commissioning activities including flushing, leak testing, mechanical run tests, and system handover to operations.</p></li><li><p>Participate in daily progress meetings, monitor subcontractor performance, and report progress to the Construction Manager.</p></li><li><p>Ensure strict adherence to HSE regulations, conduct risk assessments, and ensure safe mechanical lifting, rigging, and installation activities on site.</p><p><br></p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor's degree in Mechanical Engineering or a related field.</p></li><li><p>Good knowledge in mechanical engineering principles, particularly in the oil and gas sector.</p></li><li><p>Knowledge of the design and process of oil and gas plants</p></li><li><p>Understanding of maintenance and troubleshooting techniques of equipment involved in field services and EPC operations.</p></li><li><p>Strong analytical and problem-solving skills.</p></li><li><p>Effective communication and teamwork abilities.</p></li><li><p>Ability to learn quickly and adapt to new tools and technologies.</p></li><li><p>Familiarity with industry standards and safety regulations is an advantage.</p></li><li><p>7-10 years experience in static, rotary equipment installation.</p></li><li><p>Knowledge of piping and general mechanical works.</p></li></ul><p></p></section>

<p><h4>E&I Engineer</h4> <p>KBR Sustainable Technology Solutions (STS) provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design capabilities, and smart solutions to optimize planned and operating assets.</p> <p>Responsible for start-up and plant operations activities including equipment and system checkout, inspection for proper installation, review for correct design, and calculation of expected system and equipment operating parameters under temporary start-up conditions. Coordinates start-up operations, including the direction of craft, and all other start-up activities such as flushing, chemical cleaning, and initial equipment and system operation. Coordinates performance tests and calculates test results and heat balances. Performs calculations required to properly evaluate design changes, provides engineering reports for the engineering department to assist in design change preparation. Works with client at the site.</p> <p>Under general supervision, performs all conventional aspects of the functional area subject matter. Devises new approaches to problems encountered. Plans, schedules, and conducts work requiring judgment in the independent evaluation, selection, and adaptation of engineering techniques, procedures, and criteria. Performs work which involves conventional engineering practice but may include a variety of complex features such as conflicting design requirements, unsuitability of conventional materials, and difficult coordination requirements. Provides technical guidance to designers and less experienced engineers.</p> <p>Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability, or operations. Skills are typically acquired through an undergraduate degree in engineering and a minimum of 10 years related experience, with average experience ranging from 10-15 years.</p></p><p></p>

<p><h4>E&I Engineer</h4> <p>KBR Sustainable Technology Solutions (STS) provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design capabilities, and smart solutions to optimize planned and operating assets.</p> <p>Responsible for start-up and plant operations activities including equipment and system checkout, inspection for proper installation, review for correct design, and calculation of expected system and equipment operating parameters under temporary start-up conditions. Coordinates start-up operations, including the direction of craft, and all other start-up activities such as flushing, chemical cleaning, and initial equipment and system operation. Coordinates performance tests and calculates test results and heat balances. Performs calculations required to properly evaluate design changes, provides engineering reports for the engineering department to assist in design change preparation. Works with client at the site.</p> <p>Under general supervision, performs all conventional aspects of the functional area subject matter. Devises new approaches to problems encountered. Plans, schedules, and conducts work requiring judgment in the independent evaluation, selection, and adaptation of engineering techniques, procedures, and criteria. Performs work which involves conventional engineering practice but may include a variety of complex features such as conflicting design requirements, unsuitability of conventional materials, and difficult coordination requirements. Provides technical guidance to designers and less experienced engineers.</p> <p>Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability, or operations. Skills are typically acquired through an undergraduate degree in engineering and a minimum of 10 years related experience, with average experience ranging from 10-15 years.</p></p><p></p>

<p>Rutledge group started out in 1981 provides quality safety services to the oil &amp; gas, petrochemical, specialty chemicals, engineering and construction industries. We provide total safety management support services on site, in areas of safety H2S, HSE, training, rental of safety equipment, service and maintenance of equipment.</p><p>&nbsp;</p><p><strong>Job Description</strong></p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Conduct well site survey for offshore, onshore installations, prepare schematics of both gas detection and breathing air cascade system, Installation of fixed-point sensors, wireless gas detection based on client well plan.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Supervise the H2S Unit / Container installation at the site and rig up/ setting up all necessary fixed or remote gas detection systems, alarms and ensure their safety aspects.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Continuously monitor all the H2S equipment, the gas detection system and H2S alarm control panel on the site</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Maintain, Service and Testing of all in-house and client equipment to ensure they are in ready-to-go state.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Trouble shoot, repair, test, and commission the full range of safety equipment in the field.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Monitor and record H2S gas concentration on various activities such as Well Test Operations, Sour gas flaring, Coring, DST, TCP operations.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Gas sampling such as H2S, LEL, CO2, SO2 and other gases if and as required.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Conduct On site H2S Safety Induction, trainings, conduct emergency safety drills and ensure personnel proficiency in usage of the Breathing Equipment.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Prepare site specific H2S induction training if required by Client.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Participate safety meetings and toolbox talks.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Participate in STOP card &amp; NUHS programme</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Prepare Contingency Plans, Emergency Response Plan, Equipment maintenance report on equipment and internal audits.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Discuss the observations and areas of improvements with onsite HSE and Company’s representatives.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Conduct regular Simulated Drills (i.e.H2S Drills, Man Down Drill, Muster Drill as per Company’s guidelines and schedules.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Supervise the emergency situations because of H2S release, provide recommendations to handle the situations and suggest the best practice methods to work under mask to control the situations for different operations e.g. well control etc.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Prepare and submit the field Rutledge ISO reports on inspections, repairs, calibrations, testing, training records, inventories, drills etc. to Company representative and operations manager as required.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Assist in confined space entry &amp; gas testing.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Prepare and submit the Customer Satisfaction Quality Questionnaire.</p><p><strong>Requirements</strong></p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Candidate must possess at least a Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Petroleum/Oil/Gas), Geology/Geophysics or equivalent.</p><p>·&nbsp; &nbsp; &nbsp; &nbsp; Preferable with 2-5 years working experience in the oil &amp; gas industry or petrochemical facilities.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Previous work experience as an offshore rig personnel such as electrical, drilling, mudlogging or safety is a definite advantage.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Candidates without prior experience but have worked in drilling well sites or petrochemical facilities are welcome to apply.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Able to stay at Client’s well sites for an extended duration.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; A positive attitude with good problem-solving skills, creativity, displaying initiative and willing to work in a multi-cultural environment.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Capable of representing Company before Clients and for business development.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Bilingual in English and Arabic.</p>

<p><h4>Job purpose</h4> <p>To maintain, repair HVAC system in process area. Perform preventive and shutdown maintenance, inspection, repair, installation and commissioning of HVAC i.e. heating, ventilation, air conditioning systems in Majnoon.</p> <h4>Duties and responsibilities</h4> <ul> <li>Maintain, install, and repair HVAC, air conditioning, ventilation and heating systems.</li> <li>Troubleshoot issues with industrial HVAC system.</li> <li>Conduct performance tests with specialized tools and adjust system settings to keep the system reliable.</li> <li>Downloading and uploading programs in PLCs such as Siemens, Schneider, ABB, Mitsubishi, Allen Bradley etc.</li> <li>Troubleshoot and repair the smart VRF HVAC units which are having BLDC motors and programmed electronic cards.</li> <li>Carry out brazing with oxy acetylene set to replace compressors, rectifying copper pipe leaks and modifying refrigerant pipe lines.</li> <li>Repair or replace defective parts in units and equipment and their controls, including thermostats, automatic switches, fan controls, log switches, damper motors, louvers, relays, filters, controls, belts, compressors, heat exchangers, high limit controls, pressure controls.</li> <li>Operate a variety of hand and power tools, brazing torch, vacuum pump, test equipment utilized.</li> <li>Install and calibrate systems; install copper tubing and repair pipes and tubing as necessary; test joints and insulate pipes of HVAC, air conditioning systems; flush rebuild pressure and temperature.</li> <li>Install compressors, evaporators, motors, ducts, and piping as well as mechanical/electrical controls; read and interpret blueprints/diagrams.</li> <li>Troubleshoot breakdowns and repair malfunctioning HVAC systems and components; utilize measuring and testing instruments.</li> <li>Demonstrated exceptional time management skills; organized and prioritized high volume of work orders to ensure maximum quality.</li> </ul> <h4>Qualifications & experience</h4> <ul> <li>University degree in related discipline.</li> <li>8-10 years’ experience of HVAC system and AC units within a large industrial plant, preferably in the oil and gas industry.</li> <li>Understanding of advanced principles of air conditioning, refrigeration and heating.</li> <li>Proficient in reading schematics and work plans.</li> <li>Computer and software skills: <ul> <li>Excel – advanced</li> <li>Word – intermediate</li> <li>PowerPoint – intermediate</li> </ul> </li> <li>Intermediate proficiency in English verbal and written.</li> </ul> <h4>Skills</h4> <ul> <li>Knowledge of materials, methods and tools used in the operation and repair of HVAC.</li> <li>Knowledge of welding and soldering techniques.</li> <li>Proper methods of storing equipment.</li> <li>Aware about PTW system and working in oil field.</li> <li>Have IT skills (Excel, PowerPoint, Microsoft Office, SharePoint etc.).</li> <li>Communicate effectively both orally and in writing.</li> <li>Work cooperatively with others.</li> <li>Work independently with little direction.</li> <li>Meet schedules and timelines.</li> <li>Maintain routine records and prepare reports.</li> </ul></p><p></p>

<p><h4>Job purpose</h4> <p>To maintain, repair HVAC system in process area. Perform preventive and shutdown maintenance, inspection, repair, installation and commissioning of HVAC i.e. heating, ventilation, air conditioning systems in Majnoon.</p> <h4>Duties and responsibilities</h4> <ul> <li>Maintain, install, and repair HVAC, air conditioning, ventilation and heating systems.</li> <li>Troubleshoot issues with industrial HVAC system.</li> <li>Conduct performance tests with specialized tools and adjust system settings to keep the system reliable.</li> <li>Downloading and uploading programs in PLCs such as Siemens, Schneider, ABB, Mitsubishi, Allen Bradley etc.</li> <li>Troubleshoot and repair the smart VRF HVAC units which are having BLDC motors and programmed electronic cards.</li> <li>Carry out brazing with oxy acetylene set to replace compressors, rectifying copper pipe leaks and modifying refrigerant pipe lines.</li> <li>Repair or replace defective parts in units and equipment and their controls, including thermostats, automatic switches, fan controls, log switches, damper motors, louvers, relays, filters, controls, belts, compressors, heat exchangers, high limit controls, pressure controls.</li> <li>Operate a variety of hand and power tools, brazing torch, vacuum pump, test equipment utilized.</li> <li>Install and calibrate systems; install copper tubing and repair pipes and tubing as necessary; test joints and insulate pipes of HVAC, air conditioning systems; flush rebuild pressure and temperature.</li> <li>Install compressors, evaporators, motors, ducts, and piping as well as mechanical/electrical controls; read and interpret blueprints/diagrams.</li> <li>Troubleshoot breakdowns and repair malfunctioning HVAC systems and components; utilize measuring and testing instruments.</li> <li>Demonstrated exceptional time management skills; organized and prioritized high volume of work orders to ensure maximum quality.</li> </ul> <h4>Qualifications & experience</h4> <ul> <li>University degree in related discipline.</li> <li>8-10 years’ experience of HVAC system and AC units within a large industrial plant, preferably in the oil and gas industry.</li> <li>Understanding of advanced principles of air conditioning, refrigeration and heating.</li> <li>Proficient in reading schematics and work plans.</li> <li>Computer and software skills: <ul> <li>Excel – advanced</li> <li>Word – intermediate</li> <li>PowerPoint – intermediate</li> </ul> </li> <li>Intermediate proficiency in English verbal and written.</li> </ul> <h4>Skills</h4> <ul> <li>Knowledge of materials, methods and tools used in the operation and repair of HVAC.</li> <li>Knowledge of welding and soldering techniques.</li> <li>Proper methods of storing equipment.</li> <li>Aware about PTW system and working in oil field.</li> <li>Have IT skills (Excel, PowerPoint, Microsoft Office, SharePoint etc.).</li> <li>Communicate effectively both orally and in writing.</li> <li>Work cooperatively with others.</li> <li>Work independently with little direction.</li> <li>Meet schedules and timelines.</li> <li>Maintain routine records and prepare reports.</li> </ul></p><p></p>

<p><h4>Job description</h4> <p><strong>Division:</strong> CSSP (Ratawi Hub – Iraq)<br> <strong>Direction:</strong> PCM</p> <h4>Situation in organization</h4> <p>The Reporting Engineer position is within the Project Control Organization of the project reporting to the Planning & Reporting Manager.</p> <h4>Job dimensions</h4> <p>The Reporting Engineer is responsible for collecting, analyzing, and presenting project performance data to support decision-making and ensure transparency across all phases of the CSSP project. The role contributes to the timely and accurate delivery of internal and external reports, dashboards, and KPIs, including HSE and risk-related metrics.</p> <p>In addition, the Reporting Engineer is responsible for supporting project digitalization and information management initiatives, ensuring the effective governance, quality, accessibility, and integration of project information across all participating organizations. The position oversees the Information Management Assistant function and promotes the efficient use of digital collaboration platforms, reporting systems, document management tools, and data-sharing solutions to enhance project execution and stakeholder alignment.</p> <p>The role acts as a focal point between Project Controls, Engineering, Construction, HSE, Contractors, and Company stakeholders to ensure consistency, traceability, and reliability of project data and information throughout the project lifecycle.</p> <p>Iraq Common Seawater Supply Project (CSSP) intends to provide treated seawater to the oil fields in southern Iraq (for injection). CSSP is composed of water pipelines which are part of Basra Oil Company (BOC) scope of work, and the Water Infrastructure Project (WIP), previously named STF (Seawater Treatment Facilities). The WIP will be located on the west side of the Khor Al Zubair, upstream of the port of Umm Qasr.</p> <p>The major components of the WIP include seawater intake and outfall structures, material offloading facility, seawater clarification, filtration and deoxygenating processes, shipping pumps, a fuel gas pipeline, power generation, utilities and non-process.</p> <p>The budget of the WIP is circa $3 billion.</p> <p>The Reporting Engineer is expected to commence duties in the 3rd quarter of 2026 and will be based in Basra.</p> <h4>Activities</h4> <p><strong>1- Reporting & Analysis</strong><br> <li>Collect and validate progress data from various project disciplines (engineering, procurement, construction, HSE, etc.).</li> <li>Prepare and update weekly/monthly progress reports, dashboards, and executive summaries.</li> <li>Track and report key performance indicators (KPIs), including physical progress, productivity, and forecasted completion dates.</li> <li>Support the Planning & Reporting Manager in preparing presentations for internal and external stakeholders.</li> <li>Ensure consistency and traceability of reporting documentation across all project phases.</li></p> <p><strong>2- HSE & Risk Reporting</strong><br> <li>Monitor and report HSE performance indicators (e.g., LTIs, TRIR, safety observations) in coordination with HSE teams.</li> <li>Maintain and update HSE dashboards and integrate safety metrics into overall project reporting.</li> <li>Assist in compiling and presenting periodic risk assessments and mitigation tracking.</li></p> <p><strong>3- Systems & Tools</strong><br> <li>Use reporting tools such as Power BI, Excel, Word, PowerPoint, and project control systems to generate visualizations and reports.</li> <li>Ensure data integrity and alignment between planning, cost control, and reporting systems.</li></p> <p><strong>4- Documentation & Compliance</strong><br> <li>Ensure compliance with TotalEnergies, BOC, and project standards for reporting procedures.</li> <li>Support audits, reviews, and project evaluations by providing accurate and timely reporting documentation.</li> <li>Coordinate with internal departments (Planning, Cost Control, Contracts, HSE) to ensure reporting accuracy.</li></p> <p><strong>5- Information Management & Digitalization</strong><br> <li>Lead project information management and digitalization activities.</li> <li>Supervise the Information Management Assistant and oversee project information, data, and records management.</li> <li>Ensure information quality, consistency, accessibility, and traceability across all project stakeholders.</li> <li>Coordinate information exchange between Company and Contractors.</li> <li>Support and optimize digital tools and platforms, including SharePoint, Power BI, and document management systems.</li> <li>Develop and maintain project data repositories, dashboards, and reporting systems.</li></p> <h4>Context and environment</h4> <p>TotalEnergies is acting as contractor to BOC. After the completion of the project, the facilities will be handed over to BOC for operation.</p> <h4>Accountabilities</h4> <p>The Reporting Engineer is responsible for collecting, analyzing, and presenting project performance data while ensuring effective information management and digital collaboration across the CSSP project. The role drives reporting excellence, supports project digitalization initiatives, supervises the Information Management Assistant, and ensures that project information is accurate, accessible, integrated, and available to support timely decision-making across all stakeholders.</p> <h4>Qualifications / Experience required</h4> <li>Degree in engineering, data analytics, or related field.</li> <li>Minimum 5 years of experience in project reporting within large-scale industrial or oil & gas projects.</li> <li>Strong analytical and data visualization skills.</li> <li>Proficiency in reporting tools (Power BI, Excel, Word, PowerPoint, etc.).</li> <li>Experience in information management or project data management.</li> <li>Understanding of data governance and information quality principles.</li> <li>Good communication and organizational skills.</li> <li>Ability to work in a multicultural and high-pressure environment.</li> <li>Experience in engineering/construction commercial or contracts administration role.</li> <li>Ability to listen to and understand the signals and queries from various interlocutors.</li> <li>Languages: English is mandatory; knowledge of French and Arabic is a plus.</li></p><p></p>

<p><h4>Belong, connect, grow, with KBR!</h4> <p>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</p> <p>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Job purpose</h4> <p>Responsible for the process design, operation and implementation, improve industrial processes in order to maintain efficiency, reduce cost, improve sustainability and maximize profitability.</p> <h4>Duties and responsibilities</h4> <ul> <li>Develop, configure and optimize industrial processes from inception through to start up and certification</li> <li>Assess processes, take measurements and interpret data</li> <li>Design, run, test and upgrade systems and processes</li> <li>Develop best practices, routines and innovative solutions to improve production rates and quality of output</li> <li>Perform process simulations</li> <li>Manage cost and time constraints</li> <li>Provide technical assurance to unit operations and ensure production plan delivery</li> <li>Provide process documentation and operating instructions</li> <li>Participate timely completion of Management of Change work (MOCs, medium to long term)</li> <li>Utilise and perform maintenance of standardized monitoring tools to perform unit monitoring (spreadsheets, or data historians like PI Process Book, etc.)</li> <li>Participate in special projects as required</li> <li>Support senior operation support engineer as required</li> <li>Consult technical specialist teams as required</li> <li>Facilitate and participate in HAZOP studies, and other safeguarding reviews</li> <li>Utilize structured problem-solving techniques as appropriate: option analysis, RCA, etc.</li> <li>Ensure compliance with engineering related regulations and Shell standards</li> <li>Promote and support compliance to operating integrity</li> <li>Provide input into and support for the integrated activity plan</li> <li>Support operations reliability improvement process to ensure timely and appropriate corrective action has been taken to ensure repeat failures are eliminated</li> </ul> <h4>Qualification & training requirements</h4> <p>BSc. Degree in chemical or petrochemical engineering.</p> <h4>Experience</h4> <ul> <li>A minimum of 5 years of proven working experience in process engineering</li> <li>Experience in process simulations, with working knowledge of process engineering software packages and knowledge of process related standards</li> <li>Experience in different process industries, either upstream, downstream, gas plants or with engineering and construction major contractors</li> </ul> <h4>Language proficiency, computer and software skills</h4> <ul> <li>Advanced knowledge of MS Office</li> <li>Honeywell UniSim - Intermediate</li> <li>PipeSim - Intermediate</li> <li>Instrument Calculation Tool - Intermediate</li> <li>PI Process Book - Intermediate</li> <li>English - Speaking, writing and reading: Intermediate</li> </ul> <h4>Skills</h4> <ul> <li>Reading and updating process documents</li> <li>Presentation skills</li> <li>Problem solving</li> <li>Report writing</li> <li>Communication skills</li> </ul></p><p></p>

<p><h4>Belong, connect, grow, with KBR!</h4> <p>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</p> <p>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Job description: Superintendent power</h4> <p><strong>Company:</strong> KBR Iraq<br> <strong>Location:</strong> Majnoon Oil Field, Iraq<br> <strong>Rotation:</strong> 28/28<br> <strong>Nationality:</strong> Iraqi nationals preferred</p> <p>The Superintendent Power is responsible for leading, supervising, and coordinating all electrical power generation, distribution, and maintenance activities across the Majnoon Oil Field. This role ensures safe, reliable, and compliant operation of electrical systems supporting production facilities, camps, utilities, and critical infrastructure. Superintendent provides technical leadership, oversees site execution, and ensures alignment with KBR standards and client requirements.</p> <h4>Accountability / expectations</h4> <ul> <li>Oversee daily operation, maintenance, and troubleshooting of power generation units, HV/LV distribution networks, switchgear, transformers, MCCs, and protection systems.</li> <li>Ensure electrical systems operate within design parameters, safety limits, and reliability targets.</li> <li>Lead fault investigations, root-cause analysis, and corrective action implementation.</li> <li>Manage preventive and predictive maintenance programs to minimize downtime and extend asset life.</li> <li>Provide expert guidance on electrical engineering standards, power system design, and safe work practices.</li> <li>Ensure full compliance with KBR HSSE, electrical regulations, and international codes.</li> <li>Review and approve electrical work permits, isolation plans, energization procedures, and switching operations.</li> <li>Maintain accurate documentation, single line diagrams, load studies, and equipment records.</li> <li>Coordinate electrical construction, installation, commissioning, and upgrade activities across the field.</li> <li>Interface with engineering, construction, commissioning, and operations teams to ensure technical alignment.</li> <li>Verify contractor performance, quality of workmanship, and adherence to specifications.</li> <li>Support integration of new facilities into the existing power network.</li> <li>Supervise electrical supervisors, technicians, and contractors across multiple site locations.</li> <li>Ensure competency development, training, and mentoring of Iraqi national workforce.</li> <li>Promote a strong safety culture and enforce compliance with electrical safety rules and LOTO procedures.</li> <li>Liaise with Operations, Maintenance, HSSE, and Planning departments to ensure seamless power support for field activities.</li> <li>Monitor power system performance, load demand, and energy efficiency opportunities.</li> <li>Prepare daily, weekly, and monthly reports on electrical system status, outages, and maintenance KPIs.</li> </ul> <h4>Education</h4> <p>Bachelor’s degree in Electrical Engineering</p> <h4>Experience</h4> <ul> <li>10+ years experience in electrical power systems within oil & gas, petrochemical, or heavy industrial environments.</li> <li>Strong knowledge of HV/LV systems, generators, protection relays, SCADA, and industrial electrical equipment.</li> <li>Proven experience in site-based leadership roles (Superintendent, Supervisor, Lead Engineer).</li> <li>Demonstrated ability to manage multi-disciplinary teams in remote field environments.</li> </ul></p><p></p>

<p><h4>Instrument & Controls Lead Engineer</h4> <p>KBR Sustainable Technology Solutions (STS) provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design capabilities, and smart solutions to optimize planned and operating assets.</p> <p>We are looking for an Instrument & Controls (I&C) Lead for an upcoming project. This role will work with our team of engineers to identify and define solutions that reduce risk and grow installed production capacity. This role will provide Instrument and Controls support for site operations while ensuring safe and effective operations through managing risk, addressing questions, and minor modification activities. The Instrument & Controls Lead Engineer will be responsible for providing immediate front-line support for Operations and Maintenance teams to resolve minor issues and escalate more significant issues to the Central Engineering Team. This role will report to the Area Engineering Support Team Lead and will have I&C Engineers as direct reports.</p> <h4>Responsibilities</h4> <ul> <li>Production delivery, optimisation & excellent performance</li> <li>Responsible for day-to-day optimization of I&C systems to ensure safe, stable, and efficient process control, including loop tuning, alarm management, and SIS performance monitoring.</li> <li>Identifies production vulnerabilities and optimization opportunities to support production forecast and grow installed production capacity.</li> <li>Ensure control systems are operated within their design and operating envelopes; any deviations are reported, risk assessed, and managed via operational risk assessment processes.</li> <li>Lead or support root cause investigations (e.g., 5 Whys, fault tree analysis) for I&C-related process safety incidents, production losses, and product quality issues exceeding defined limits.</li> <li>Prioritize I&C vulnerabilities based on risk and production impact, ensuring corrective actions are focused on the highest-priority issues.</li> <li>Actively lead continuous improvement projects involving instrumentation, automation, and control systems; promote continuous improvement philosophy and engage site teams to drive improvement initiatives.</li> </ul> <h4>Qualifications</h4> <ul> <li>Above 10 years experience in oil and gas industry, preferably with international oil companies (direct or contract).</li> <li>Technical degree in engineering or relevant engineering subject.</li> <li>Experience in previous asset engineering or operations engineering role.</li> <li>Practical exposure to production facilities.</li> <li>Excellent communication, interpersonal, and coaching skills.</li> <li>Strong bias for being proactive and getting results.</li> <li>Excellent IT skills – Office suite, document management, applications for CMMS and change management.</li> <li>Contribute to an environment in which all team members are respected regardless of their individual differences and are motivated to improve both their individual and team contributions to achieve desired business results.</li> <li>Skilled in behaviour change management.</li> <li>Not essential but preferable: professional (chartered) engineer.</li> <li>Experience in roles in culturally and linguistically diverse working environments.</li> </ul> <h4>Preferred Qualifications</h4> <ul> <li>Certified professional engineer.</li> </ul> <p><strong>Belong. Connect. Grow. with KBR!</strong></p></p><p></p>

<p>We are recruiting for a Welding Engineer with the following details : Location : Basrah, IRAQ Duration : 12 months, renewable Work Scheme : Rotational, 4 weeks ON and 4 weeks OFF Job Overview / Summary Ensure that all welding activities related to pipelines, flowlines, piping, and structures are performed in compliance with Project Specifications, approved procedures, applicable codes.</p><p><strong>Desired Candidate Profile</strong></p><p>Experience Requirements</p><ul><li><p><strong>Total Experience Required:</strong> 20 years in Oil and Gas projects</p></li><li><p><strong>Relevant Experience Required:</strong> 10 years in a similar position</p></li><li><p><strong>Industry-Specific Experience:</strong> Oil and Gas projects</p></li></ul><br><p>Qualifications</p><ul><li><p><strong>Minimum Qualification Required:</strong> International Welding Engineer (IWE / IIW) or Engineering degree in a relevant discipline</p></li><li><p><strong>Language Proficiency:</strong> Fluency in English (speaking and writing); Arabic would be a plus</p></li></ul>

<p><h4>Job description</h4> <p><strong>Job title:</strong> Planning Engineer</p> <p><strong>Reports to:</strong> Project Control Manager</p> <p><strong>Skillpool:</strong> Project Services</p> <p><strong>Company:</strong> KBR-Iraq</p> <p><strong>Project:</strong> EPCM</p> <p><strong>Location:</strong> Basra, Iraq</p> <p><strong>Rotation:</strong> 28/28</p> <p><strong>Required:</strong> Local National</p> <h4>About company</h4> <p>Belong, connect, grow, with KBR! The KBR team delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</p> <p>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Roles and responsibilities</h4> <p>The planning engineer will report to the project control manager. Specific responsibilities include:</p> <ul> <li>Developing and maintaining project execution schedules including level 1/2/3 schedules using tools like Primavera P6. Ensure alignment on project assumptions with cost engineering, cost estimation, risk management and project management.</li> <li>Implement schedule requirements of company into the planning and cascade these to the contractors accordingly.</li> <li>Coordinate with engineering, procurement, and construction teams to gather inputs for the master schedule.</li> <li>Monitor progress and update schedules regularly to reflect actual performance.</li> <li>Identifying trends or potential slippages and report on these to the project engineers or the project services lead.</li> <li>Producing regular reports on progress against schedule. Reporting schedule performance index (SPI).</li> <li>Deliver and maintain consistent and realistic plans and control structures for the project. Understand the list of plans required to execute the assigned project sub-elements and their interface to other sub-elements. Develop the activities, durations as per productivity norms, logic, resources and progress for the assigned project sub-elements, leading to the creation of the baseline schedule and its subsequent maintenance.</li> <li>Develop, implement and comply with the planning and progress monitoring procedures.</li> <li>Conduct the schedule monthly progress update, forecast, critical path and trend analyses for assigned elements, including any impact from interface areas. Implement and maintain the status reports. Provide regular and comprehensive schedule status reports to project engineers.</li> <li>Liaise with and challenge project engineering personnel to ensure proper understanding of the key schedule sensitivities and drivers.</li> <li>Develop contract key dates, milestones and project hub plan dates that align with the overall project schedule.</li> <li>Participate in evaluating bid schedules and reviewing and assessing contractor plans to support contract award recommendations.</li> <li>Develop contract sections for planning and progress monitoring and reporting. Review, verify, assess contractors reported progress and ensure that this is reflected in the project schedule.</li> <li>Contribute to the translation of the project’s risk profile into the probabilistic risk model and understand the output, including the key risk drivers for the possible range of schedule completion dates. Track the criticality of the main paths to completion and float consumption.</li> <li>Provide input data for and participate in benchmarking activities.</li> <li>Contribute to close-out data to enable knowledge retention (lessons learned, project data compilation) at completion of work.</li> </ul> <h4>Education, skills & experience</h4> <p><strong>Education</strong></p> <p>Bachelor’s degree or diploma in any discipline</p> <p><strong>Experience and skill set</strong></p> <ul> <li>Minimum 8 years experience in oil and gas industry in planning engineer roles.</li> <li>Minimum 5 years experience in oil and gas related project delivery projects.</li> <li>Ability to work and manage in a multi-cultural environment with good understanding of cost estimation parameters to be considered in Middle East.</li> <li>Skill to actively engage with different project disciplines.</li> <li>Ability to work and manage in a multi-cultural environment.</li> </ul></p><p></p>

<p><h4>Petroleum engineer (reservoir)</h4> <p>Under direct supervision, this position is responsible for all phases of planning and execution on a small project or may be responsible for a segment of a larger project.</p> <p>Plans, organizes, coordinates, and controls small engineering projects in accordance with the established policies, procedures, systems, and requirements approved by the company.</p> <p>Contributes toward the day to day contact and communication with the client and focuses on providing client satisfaction.</p> <p>Possesses knowledge of the respective industry.</p> <p>Skills are typically acquired through completion of an undergraduate degree in engineering or project management and a minimum of 2 years related experience, with typical experience ranging from 3-7 years.</p></p><p></p>

<p><h4>About company</h4> <p>Belong, connect, grow, with KBR! The KBR team delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</p> <p>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Roles and responsibilities</h4> <p>The Cost Engineer will report to the Project Control Manager.</p> <p>Specific responsibilities include:</p> <li>Full understanding of the commercial aspect of the project contract and the application to the cost management</li> <li>Understand contract specific cost procedures and carry out all work in accordance with these</li> <li>Study and understand all relevant project documents relating to the cost management of allocated project(s)</li> <li>Work with all relevant projects and discipline personnel to ensure that cost control procedures are followed</li> <li>Set up project/projects within Cost System to agreed format</li> <li>Establishing project control budgets based on the client approved Project Control Estimate</li> <li>Reviewing cost commitment and expenditure information (for all cost elements), for input to the computerized cost control and reporting system on a weekly basis and ensuring that all information received is accurate and correctly input</li> <li>Producing regular cost reports and advising management of any forecast cost overruns as soon as possible to allow corrective actions to be taken in a timely manner. Highlighting areas of concern and suggesting areas of improvement</li> <li>Maintaining comprehensive accessible registers of financial approvals, variations and change orders</li> <li>Review project man-hours and the allocation of man-hours in conjunction with Planning on a regular basis</li> <li>Liaising with the Project Management, Finance, Contracts and Procurement departments with regards to establishing monthly evaluation of work done, goods received and services rendered for invoice preparation and verification</li> <li>Ensure that all cost related work is in compliance with the contract</li> <li>Maintain rates within Computerized Cost System, ensuring they are up to date and all rate uplifts are implemented. Advise Project Management of additional costs involved and assist in obtaining additional approval from client</li> <li>Check that all estimates meet contract requirements and all relevant cost information is fed back to the estimates</li> <li>When Project specific Cost Procedures are in place ensure they have been implemented in full</li> <li>Maintain a good working knowledge of relevant corporate cost software</li> <li>Ensure that adequate control of commitment is in place</li> <li>Supervise and encourage junior and assistant personnel, including checking their work</li> <li>Participate in schedule risk analysis as required</li> <li>Ensure that the Corporate and Project Specific Change Control procedures are being adhered to</li> <h4>Education, skills & experience</h4> <h4>Education</h4> <li>Bachelor’s degree in an engineering discipline</li> <h4>Experience and skill set</h4> <li>Minimum 8 years experience in oil and gas industry in cost engineering roles</li> <li>Minimum 5 years experience in oil and gas related project delivery related projects</li> <li>Minimum 5 years experience in oil and gas project delivery as an umbrella contract senior cost engineer</li> <li>Ability to work and manage in a multi-cultural environment with good understanding of cost estimation parameters to be considered in Middle East</li> <li>Skill to actively engage with different project disciplines</li> <li>Ability to work and manage in a multi-cultural environment</li></p><p></p>

<p><h4>Belong, connect, grow, with KBR!</h4> <p>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</p> <p>KBR provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Location</h4> <p>Iraq - KBR office<br> 28/28 rotation</p> <h4>Job purpose</h4> <p>Define piping design bases, codes, standards, and deliverables to ensure safe, reliable, and cost-effective solutions.<br> Single point of contact for piping deliverables and activities related to piping materials.<br> Interface with client, vendor, and other stakeholders for successful execution of the project.<br> Coordinate with multi-disciplinary teams (process, mechanical, civil, electrical, instrumentation) and vendors to ensure integrated piping systems.<br> Mentor engineers, drive quality, and ensure schedule adherence for piping deliverables across project phases.</p> <h4>Key responsibilities</h4> <ul> <li>Develop and review piping design basis, piping material specifications, datasheets, and technical bid evaluations.</li> <li>Ensure compliance with applicable codes and standards and project-specific requirements.</li> <li>Develop standard deliverables, various datasheets, and requisition packages related to piping.</li> <li>Experience in non-metallic piping (GRE / HDPE) procurement and specifications.</li> <li>Provide in-depth technical support for material selection involving metallic and non-metallic piping systems.</li> <li>Participate in material selection and corrosion review sessions to ensure suitable materials for service conditions.</li> <li>Review and approve technical deliverables (isometrics, P&IDs, BOMs, MOC/Change Notes, design change requests, technical queries).</li> <li>Demonstrated knowledge of material tracking throughout the project cycle.</li> <li>Understand the MOC process and employ effective change management throughout the lifecycle of the project.</li> <li>Contribute to lessons learnt from the project.</li> <li>Report to department manager/lead engineer for the project.</li> </ul> <h4>Experience</h4> <ul> <li>12+ years of experience in concept, FEED and detail engineering and EPCM experience in the oil & gas industry.</li> <li>Experience with Middle East clients like ADNOC, BP, BOC, PDO, Total Energies & Qatar Energies is highly preferred.</li> <li>Familiarity with onshore and offshore facilities and carried out greenfield and brownfield projects.</li> <li>Experience working with multicultural project teams across various project execution centers.</li> <li>Familiarity with international piping codes and standards such as ASME B31.3, ASTM, API, and NACE MR0175/ISO 15156.</li> </ul> <h4>Qualifications</h4> <ul> <li>Master or bachelor of engineering in a related field.</li> <li>Professional membership or relevant certifications (e.g., PE/Chartered Engineer) are a plus.</li> <li>Certification related to piping design or stress analysis is advantageous.</li> </ul> <h4>Technical skills</h4> <ul> <li>Strong background in piping design, engineering, stress analysis, and support design.</li> <li>Proficiency with piping design software and calculation tools (e.g., CAESAR, AutoPIPE and 3D modeling tools).</li> <li>Technical experience to prepare manhours estimation for different types of piping activities and deliverables of different phases of the project like select phase, FEED and execution.</li> <li>Familiarity with codes, standards, regulations and practices applicable to the design and construction of various facilities.</li> <li>Hands-on knowledge of codes and standards relevant to piping.</li> <li>Experience with high-pressure piping, thermal insulation, coatings, and corrosion considerations.</li> <li>Diverse working experience in project management, conceptual, FEED and detailed design, and construction.</li> <li>Knowledge of interdisciplinary work processes, interfaces, and deliverables.</li> <li>Responsible for the training and development of engineers in his/her team.</li> <li>Adherence to company processes and procedures and handle internal and external project audits.</li> <li>Proven experience in vendor qualification, technical bid evaluation, and factory audits.</li> </ul> <h4>Soft skills</h4> <ul> <li><strong>Communication:</strong> Clear, concise communication with technical and non-technical stakeholders.</li> <li><strong>Problem solving:</strong> Proactive identification and mitigation of piping-related risks.</li> <li><strong>Project management:</strong> Planning, scheduling, risk management, and deliverable tracking.</li> <li><strong>Influence & collaboration:</strong> Effective collaboration with clients, vendors, and internal teams.</li> <li><strong>Adaptability:</strong> Comfort in dynamic project environments and changing technical requirements.</li> <li><strong>Attention to detail:</strong> Rigorous approach to reviews, calculations, and documentation.</li> <li><strong>Safety mindset:</strong> Commitment to health, safety, and environment (HSE) standards.</li> <li><strong>Critical thinking:</strong> Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems.</li> </ul></p><p></p>

<p><h4>Job description</h4> <p><strong>Position:</strong> Lead process engineer<br> <strong>Company:</strong> KBR<br> <strong>Project:</strong> Majnoon<br> <strong>Location:</strong> Basra. 28/28 rotation</p> <p>Belong, connect, grow, with KBR! The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</p> <p>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Job purpose</h4> <p>The lead process engineer will own the technical integrity and successful delivery of process engineering scope across projects at different stages (conceptual studies, front-end design (FEED), and detailed engineering) for oil and gas field developments, including upstream offshore/onshore, gas treating, and downstream processing, in greenfield and brownfield environments. This role leads a team of engineers within a multidisciplinary project team, ensuring compliance with industry standards and project specifications, driving technical excellence, and fostering the development of Iraqi national staff.</p> <h4>Job responsibilities</h4> <ul> <li>Lead the preparation and review of process simulations and optimization studies for select/appraise stage projects, and champion the development of process flow schemes with heat and mass balances, equipment sizing, layout, etc., for costing and option selection.</li> <li>Own the detailed process engineering deliverables across all design phases, including process flow diagrams, piping & instrumentation diagrams, equipment datasheets, study reports/manuals, etc., ensuring alignment with international standards and project requirements.</li> <li>Oversee the review of process design work by third parties (vendors) and other offices; champion participation in HAZIDs, HAZOPs, SIL, hazard analysis reviews, and audits; ensure timely issue resolution and closure.</li> <li>Act as the primary technical interface with clients, communicating complex concepts clearly in both written and verbal formats; manage client expectations and confirm technical commitments.</li> <li>Mentor and actively develop Iraqi national staff to fulfill process engineering roles, providing structured on-the-job training, performance feedback, and growth opportunities.</li> <li>Ensure adherence to office quality and safety systems; lead the implementation of quality assurance/quality control practices within the process discipline.</li> <li>Collaborate with other disciplines to drive on-time, efficient, and safe project delivery; lead technical risk management and issue resolution within the process scope.</li> <li>Lead the technical supervision of FEED and detailed engineering activities for offshore/onshore greenfield/brownfield projects, ensuring design integrity and constructability.</li> <li>Support procurement activities by providing authoritative technical input for equipment selection and vendor evaluation, including evaluation of bid technical clarifications.</li> <li>Participate in commissioning and start-up activities, providing seasoned technical support and facilitating smooth handover to operations.</li> </ul> <h4>Functional responsibilities</h4> <ul> <li>Maintain and further develop process engineering standards, best practices, and technical governance within the project teams.</li> <li>Lead risk assessments and develop comprehensive mitigation strategies for process-related issues; own the risk register for the process discipline.</li> <li>Ensure timely delivery of all process engineering deliverables in accordance with project schedules; manage resource planning and workload distribution within the team.</li> <li>Provide technical leadership in design reviews, technical compliance, and governance for all process workstreams.</li> <li>Support and guide procurement activities with robust technical input for equipment specifications, vendor selection, and qualification.</li> <li>Lead commissioning and start-up activities from a process perspective, delivering technical support, commissioning procedures, and start-up readiness reviews.</li> </ul> <h4>Technical skills</h4> <ul> <li>Extensive experience in FEED and detailed engineering design for offshore/onshore greenfield/brownfield projects.</li> <li>Proficiency in process simulation software (e.g., Aspen HYSYS, Flare System Analyzer, ProMax, Pipesim, Pipenet, others).</li> <li>Strong knowledge of process safety management and hazard analysis techniques.</li> <li>Familiarity with relevant industry codes and standards (e.g., API, ASME, ISO).</li> <li>Experience with process control systems and instrumentation.</li> </ul> <h4>Soft skills</h4> <ul> <li>Leadership and team management skills.</li> <li>Strong communication and interpersonal skills.</li> <li>Ability to work collaboratively in a multidisciplinary environment.</li> <li>Problem-solving mindset with a focus on innovation and efficiency.</li> <li>Adaptability to changing project requirements and priorities.</li> </ul> <h4>Qualifications</h4> <ul> <li><strong>Mandatory:</strong> Bachelor’s degree in engineering (chemical, process, or related field).</li> <li><strong>Preferred:</strong> Master’s degree in engineering (chemical, process, or related field) and/or membership of internationally accepted applicable professional institute.</li> <li>10 years of experience in process engineering within engineering contractors, with a focus on FEED and EPC design for upstream onshore/offshore greenfield/brownfield projects.</li> </ul> <h4>Work environment</h4> <p>The role will be based in Iraq, requiring collaboration with local and international teams. The work environment is dynamic and fast-paced, necessitating flexibility and a proactive approach to challenges.</p></p><p></p>