وظائف مهندس مواد

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><u><b>Job Summary</b></u> <br></span><p>The HSE Engineer supports the Company HSE Manager/Project HSE Manager to implement the HSE management system. The role assists in planning, implementation, evaluation and analyzing HSE activities at site to ensure HSE target and objectives are measured and achieved.</p><br> <br><br><u><b>Job Responsibilities 1</b></u> <br><p>Assist in the implementation of and compliance to the Project Health and Safety Management Plan (PHSP)</p><br> <p>and Project HSE Management Programme.</p><br> <p>Arrange, conduct and participates in training sessions, HSE Committee and Coordination Meetings.</p><br> <p>Advise supervisory Staff with regards to accident prevention and improvement related to work methods.</p><br> <p>Assist in leading and supervising HSE officers onsite.</p><br> <p>Monitor the execution of HSE activities on a project to ensure HSE requirements are met as per the project</p><br> <p>HSE plan and HSEMS requirement.</p><br> <p>Ensure that existing hazards, unsafe work conditions and /or practices are identified on a daily basis and</p><br> <p>observation reports are raised and corrective measures are recorded.</p><br> <p>Ensure to address and report violation on daily basis and make necessary recommendations.</p><br> <p>Monitor timely reporting of project HSE performance Ensure achievement of HSE goals on project.</p><br> <p>Ensure that existing hazards, unsafe work conditions and /or practices are identified on a daily basis and</p><br> <p>observation reports are raised and corrective measures are recorded.</p><br> <p>Ensure to address and report violation on daily basis and make necessary recommendations.</p><br> <p>Monitor timely reporting of project HSE performance Ensure achievement of HSE goals on project.</p><br> <p>Support the implementation of HSE initiatives, participate in safety awareness activities, and contribute to incident reporting and resolution in alignment with company and IMS policies</p><br> <br><br><u><b>Job Responsibilities 2</b></u> <br><br><b>Additional Responsibilities 3</b> <br><br><u><b>Job Knowledge &amp; Skills</b></u> <br><p>Knowledge of all relevant safety regulations, procedures and instructions. Knowledge in Qatar and International</p><br> <p>Safety Standards. Knowledge in integrated Management System. Strong knowledge of environmental</p><br> <p>regulations, including air, wastewater, and hazardous waste. Knowledge of Chemical Material Management,</p><br> <p>including management of MSDS.Knowledge of pollution prevention and waste minimization initiatives.</p><br> <p>ERP knowledge preferably SAP functional skills are a requirement to be successful in this role.</p><br><br><br><u><b>Job Experience</b></u> <br><p>Minimum 5 year(s) working experience, 3 year(s) relevant working experience, 2 year (s) GCC is a plus</p><br><br><br><u><b>Competencies</b></u> <br>Resilience<br>AI Fluency<br>Quality<br>Leadership<br>Safety Procedures and Compliance L2<br>Safety Management L2<br>Incident Investigations L2<br>Safety Program Development L2<br>Agility<br>Accident Reduction Programs L2<br><br><br><u><b>Education</b></u> <br>Bachelor's Degree in Engineering or Level 6 Diploma in OHS<br>Diploma in NEBOSH or any Related Technical Certificates<br><br><br><br> </div>

<p>Requirements &amp; Summary</p><ul><li>Skills : Process Management , Process Engineer</li><li>Other Skills : Process Safety Engineer, Safety Engineer, QAR, RAM, FEED, detailed design, safety-critical systems, process safety and risk management</li><li>Experience : 20 + Years</li><li>Education : Bachelors/3-5 yr Degree</li><li>Employment Type : Full Time Salaried Employee</li><li>Location : Iraq, Iraq</li></ul><p>Qualifications and Experience</p><ul><li>Education: Bachelor degree and above in Chemical Engineering or related discipline.</li><li>Experience: Minimum 20 years of experience in process safety and risk management for large oil, gas, or refining projects.</li><li>Technical Background: Strong expertise in process safety studies, QRA, RAM, safety-critical systems, and international safety standards.</li></ul><p>Competencies:</p><ul><li>Ability to integrate safety across disciplines and project phases</li><li>Strong analytical and risk assessment skills</li><li>Experience in multi-contractor project environments</li></ul><p>The Senior Process Safety Engineer is responsible for the governance and management of all process safety, risk management, and loss prevention activities throughout the full lifecycle of the integrated project. Acting on behalf of the Owner within the PMT, this role ensures that safety considerations are embedded in site selection, layout development, FEED, detailed design, construction, commissioning, and start-up. The Senior Process Safety Engineer oversees all safety studies, risk assessments, and safety-related design reviews, and ensures alignment with international standards, regulatory requirements, and Owner safety philosophy. The role includes oversight of PMC safety resources and coordination of safety inputs across all contractors and licensors.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Education: Bachelor degree and above in Chemical Engineering or related discipline.</li><li>Experience: Minimum 20 years of experience in process safety and risk management for large oil, gas, or refining projects.</li><li>Technical Background: Strong expertise in process safety studies, QRA, RAM, safety-critical systems, and international safety standards.</li><li>Competencies:</li><ul><li>Ability to integrate safety across disciplines and project phases</li><li>Strong analytical and risk assessment skills</li><li>Experience in multi-contractor project environments</li></ul></ul>

<p>The Water Injection Engineer will be responsible for designing, developing, and optimizing water injection systems to support enhanced oil recovery (EOR) and reservoir pressure maintenance. The role includes conducting hydraulic analysis and simulation modeling, monitoring system performance, optimizing injection efficiency, preparing engineering documentation, supporting commissioning and start-up activities, and ensuring compliance with HSE, environmental, and industry standards. The successful candidate will work closely with reservoir, production, and operations teams to improve field performance and mentor junior engineers.</p><p>Bachelor's degree in Petroleum Engineering, Chemical Engineering, Mechanical Engineering, or a related engineering discipline; a Master's degree is an advantage. Minimum of 10 years of experience in water injection engineering within the Oil & Gas industry. Strong expertise in enhanced oil recovery (EOR), reservoir pressure maintenance, hydraulic analysis, water treatment systems, pipeline hydraulics, and injection well performance. Proficient in Aspen HYSYS, PIPEPHASE, OLGA, or equivalent simulation software. Excellent analytical, project management, communication, and troubleshooting skills. Professional Engineer (PE) registration or equivalent certification is preferred.</p>

<p>The Water Injection Engineer will be responsible for designing, developing, and optimizing water injection systems to support enhanced oil recovery (EOR) and reservoir pressure maintenance. The role includes conducting hydraulic analysis and simulation modeling, monitoring system performance, optimizing injection efficiency, preparing engineering documentation, supporting commissioning and start-up activities, and ensuring compliance with HSE, environmental, and industry standards. The successful candidate will work closely with reservoir, production, and operations teams to improve field performance and mentor junior engineers.</p><p>Bachelor's degree in Petroleum Engineering, Chemical Engineering, Mechanical Engineering, or a related engineering discipline; a Master's degree is an advantage. Minimum of 10 years of experience in water injection engineering within the Oil & Gas industry. Strong expertise in enhanced oil recovery (EOR), reservoir pressure maintenance, hydraulic analysis, water treatment systems, pipeline hydraulics, and injection well performance. Proficient in Aspen HYSYS, PIPEPHASE, OLGA, or equivalent simulation software. Excellent analytical, project management, communication, and troubleshooting skills. Professional Engineer (PE) registration or equivalent certification is preferred.</p>

<p >Skills : Project Engineer</p><p >Other Skills : Interface Engineer, interface principles, interface management. FEED, EPC, engineering interfaces, interface registers, interface matrices, interface issues, Oil and Gas, Petrochemical</p><p >Experience : 20 + Years</p><p >Education : Bachelors/3-5 yr Degree</p><p >Employment Type : Full Time Salaried Employee</p><p >Location : Iraq, Iraq</p><p >Qualifications and Experience</p><p >Education: Bachelor degree and above in Engineering.</p><p >Experience: Minimum 20 years of experience in large-scale oil, gas, refining, or petrochemical projects, with extensive exposure to FEED, EPC, and commissioning phases.</p><p >Competencies:</p><p >Strong understanding of multidisciplinary engineering interfaces</p><p >Proven ability to manage complex multi-contractor environments</p><p >Strong coordination, negotiation, and conflict resolution skills</p><p >Experience working with government authorities and licensors</p><p >Must have overseas work experience.</p><p >Fluent English (capable of using it as the operational language in daily work).</p><p><strong>Desired Candidate Profile</strong></p><p><br></p>

<p>The Electrical Engineer will be responsible for the design, analysis, and maintenance of high-voltage transmission systems supporting petroleum and gas operations. The role includes leading transmission line projects from concept through commissioning, conducting electrical load analysis, preparing system models, developing technical specifications, ensuring compliance with IEEE, NESC, NEC, and environmental regulations, and coordinating with multidisciplinary engineering teams. The successful candidate will also oversee inspections, mentor engineering staff, and provide technical expertise for transmission system upgrades and expansion projects.</p><p>Bachelor's degree in Electrical Engineering is required; a Master's degree with a specialization in Power Systems is highly preferred. Candidates must have a minimum of 10 years of electrical engineering experience, including at least 5 years in high-voltage transmission line design, analysis, and maintenance within the oil & gas, petroleum, or energy industry. Proficiency in ETAP, PLS-CADD, AutoCAD, or equivalent electrical engineering software is required. Strong knowledge of IEEE, NESC, and NEC standards, proven leadership skills, excellent communication abilities, and a Professional Engineer (PE) license or equivalent certification are preferred.</p>

<p>The Electrical Engineer will be responsible for the design, analysis, and maintenance of high-voltage transmission systems supporting petroleum and gas operations. The role includes leading transmission line projects from concept through commissioning, conducting electrical load analysis, preparing system models, developing technical specifications, ensuring compliance with IEEE, NESC, NEC, and environmental regulations, and coordinating with multidisciplinary engineering teams. The successful candidate will also oversee inspections, mentor engineering staff, and provide technical expertise for transmission system upgrades and expansion projects.</p><p>Bachelor's degree in Electrical Engineering is required; a Master's degree with a specialization in Power Systems is highly preferred. Candidates must have a minimum of 10 years of electrical engineering experience, including at least 5 years in high-voltage transmission line design, analysis, and maintenance within the oil & gas, petroleum, or energy industry. Proficiency in ETAP, PLS-CADD, AutoCAD, or equivalent electrical engineering software is required. Strong knowledge of IEEE, NESC, and NEC standards, proven leadership skills, excellent communication abilities, and a Professional Engineer (PE) license or equivalent certification are preferred.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Control Field Service Engineer </b></p><br><p><b>Are you looking for the next step in your career?</b> <b>Do you have a passion for delivering new technology and problem solving to our customers in the field?</b><br>&nbsp;</p><br><p><b>Be part of our Team</b><br>&nbsp;Our Industrial and Energy Technology (IET) operates across 120 countries and serves the entire energy value-chain and industrial sector. We hold an extensive portfolio of rotating equipment, process flow, transmission technology and lifecycle services. Our Engineering Transformation team work to improve the quality of our Engineering processes.<br>&nbsp;</p><br><p><b>Partner with the best</b></p><br><p>As a Field Service Engineer (FSE) you will represent BH both technically and professionally to ensure the equipment to be installed, maintained and started-up properly. Your key responsibilities will include:</p><br><ul><li>Provide on-site technical direction on control systems installation, including loop checks, system tests during start-up, commissioning, troubleshooting and maintenance on customer owned sites in remote oilfield, power generation and industrial facilities (Power generation includes customer owned utilities, marine drives, petrochemical, paper, steel, automotive and transportation industries)</li><li>Supervise the positioning and wiring of control panels such as Unit Control Panel (UCP), auxiliary panels of any type, Direct Current Panel (DCP), battery charger and battery cells, Generator Control &amp; Protection Panel (GCPP), Motor Control Center (MCC), etc., particularly electrical hook up, pneumatic hook up, primary hook up and field wiring done by client or sub-contractor</li><li>Check the functionality of the control sequencing for all auxiliary systems, relevant to the turbine and driven equipment such as lube oil system, hydraulic oil system, oil coolers, starting means (motor &amp; torque converter/gas expander/hydraulic starter &amp; pumps etc.), enclosure and building ventilation systems, Fire &amp; Gas detection system, compressor seal oil system, compressor dry gas seal system, process gas coolers, fuel and process gas valves, anti-surge system, etc.</li><li>Leading Installation, Maintenance, Commissioning Site Activities with proper Customer/Company Schedule Targets Mindset following strictly Quality and HSE Rules</li><li>Establish through the immediate Report after the Daily HSE Toolbox Talking the critical activity tasks and remark any HSE aspect to be followed</li><li>Utilizing Problem Solving Skills, Engineering Instructions, Drawings, and Process Instructions during <b><u>Turbomachinery’s</u></b> Commissioning and Start-up Activities - Possessing the Technical Capability to troubleshoot and provide routine maintenance checkout for <b><u>Gas Turbines</u></b> Products</li><li>Preparation of job-planning documents based to Assignment’s Scope of Work (Installation, Upgrade, Outage)</li><li>Provide leadership and technical direction to skilled labor, performing work at customer sites, maintaining strong safety mindset to assure the executed work reflects the technical requirements within Baker Hughes and customer safety standards</li><li>Providing input for Daily Outage and Weekly Installation Reports</li><li>Communicate effectively with Service/Installation/Project Managers and Site Manager about job planning, job execution, job progression as well as personnel site arrivals and departures</li><li>Prepare timely and accurate technical reports for customer records and a reference for future field service interventions.</li><li>Actively participate to customer and/or contractor meeting.</li><li>Apply all Quality procedures and documentation applicable to specific activities, ensuring they are properly followed and updated</li><li>Ensure that Site Quality Check List/Job Cards/Field Procedure are applied, and relevant documentation is properly signed.</li><li>Ensure reports and drawings “marked-up” are completed.</li><li>Ensure all Non-Conformity (technical and materials) are properly addressed using Baker Hughes e-tools and follow up till resolution.</li><li>Ensure compliance with local/current legislation, requests &amp; requirements present in the site Safety Manual</li></ul><p><b>Fuel your passion</b><br>&nbsp;To be successful in this role you will:</p><br><ul><li>Have Engineering Degree with minimum 10 years of relevant field experience in Oil &amp; Gas or Energy Sector.</li><li>Have strong knowledge on rotating equipment installation/ commissioning /maintenance / Troubleshooting. Hands on expertise on of HDGT (Frame 5/2, 6B, 7E &amp; 9E) field Instrumentation, Control logic and their auxiliaries.</li><li>High expertise and Hands-On Knowledge of Mark Vie turbine control panels.</li><li>Knowledge of PLC control panels</li><li>Experience on DLN (Dry Low NOx) systems mapping.</li><li>Be able to speak fluent English language (Speaking and writing. Crucial for Report, Customer interaction and communication with ENG HQ technical alignment)</li><li>Have strong customer service-orientation, and the ability to communicate effectively with a range of stakeholders.</li><li>Proven ability to work efficiently without direct supervision.</li><li>Proven analytical and quality improvement ability.</li><li>Strong interpersonal and leadership skills</li><li>Health, Safety and Environmental mindset and compliance.</li><li>This role requires extensive travel. Applicants must be willing and able to travel significantly (not less than 70%) without geographical restriction including offshore</li></ul><p><b>Working with us</b><br>Our people are at the heart of what we do at Baker Hughes. We know we are better when all of our people are developed, engaged and able to bring their whole authentic selves to work. We invest in the health and well-being of our workforce, train and reward talent and develop leaders at all levels to bring out the best in each other.<br>&nbsp;</p><br><p><b>Working for you</b><br>&nbsp;Our inventions have revolutionized energy for over a century. But to keep going forward tomorrow, we know we have to push the boundaries today. We prioritize rewarding those who embrace change with a package that reflects how much we value their input.</p><br>The Baker Hughes internal title for this role is: Field Specialist IV - SVS - CTRL </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Lead Interface Engineer<br><br><p><b>Job Description</b></p><br><br><p>Division: CSSP (Ratawi Hub – Iraq) </p><br><br><p>Direction&nbsp;: IM</p><br><br><p><b>Job title: Lead Interface Engineer</b></p><br><br><p><b>Situation in organization</b></p><br><br><p>Within the Project Organization, the Lead Interface Engineer is reporting to the Interface Manager</p><br><br><p>Job Location(s): CPP Office (Abu Dhabi, UAE) during Detailed Engineering Phase / SITE (Iraq) during Construction Phase</p><br><br><p><b>Job dimensions</b></p><br><br><p>The Lead Interface Engineer shall assist the Interface Manager on the following:</p><br><br><ul><li>take care of the overall Management of interface and data changes between stakeholders of the Common Seawater Supply Project, and provide advice on any schedule &amp; commercial issues arising from such interfaces and changes</li><li>ensure that Interfaces Management procedures are in place and that EPC and other contractors implement the required interface management system throughout the project duration</li></ul><p>The Lead Interface Engineer is anticipated to start early 2026 and will be based in Abu Dhabi (UAE).</p><br><br><p><b>Activities</b></p><br><br><p>The job holder shall assist the Interfaces Manager:</p><br><br><ul><li>with the support of the Project Management Consultant, define, implement and maintain the methodology/procedure to be applied and the corresponding database to be created, to ensure a clear and accurate identification and management of interfaces. This procedure will be as efficient and simple as possible and will be used throughout the life of the project and shall be applied by the different entities/ Contractors.</li><li>Management of interface and change data between parties, monitor and control interface and change issues, in order to resolve interface and change issues in a timely and organised manner according to the project interface and change control procedures.</li><li>Attend major interface meetings, internal and external with other entities of CSSP Project, Contractor representatives, Vendors, TotalEnergies specialists, Partner’s experts, etc. Lead interface and other technical meetings as required.</li><li>Ensure that HSE requirements are systematically considered all along the interface management process and in particular that interfaces are properly addressed during HAZID/HAZOP/PTR project audits.</li><li>Consolidate and advise the Project Director and Technical and Project Control Managers of any risks specially schedule &amp; commercial issues arising from interfaces and changes. Shall be the coordinator of the Management of Change, providing the justification through all disciplines of the change. Ensure complete documentation of all changes, and communication of these in compliance with the processes agreed with BOC and regulatory authorities.</li><li>Preparing technical papers to support management positions for clarifications / decisions with regulatory authorities of host countries, other entities or partners.</li><li>Ensure that EPC Contractor implements required interface management system &amp; resources and monitor throughout the project duration that EPC Contractor honours its responsibilities as defined in the project interface procedure.</li><li>Ensure the implementation of interface changes/optimisations resulting from negotiations of the external interfaces.</li><li>Together with Project Management Consultant, ensure design consistency and continuity throughout the facilities.</li><li>Avoid change orders and delays caused by interface issues; ensure timely follow-up of interface issues.</li><li>Assist the Project Management Consultant, prior to and during construction phase, by anticipating operational interfaces with other parties (clashes or conflicting program).</li><li>In case of SIMOPS (phased delivery of the plant): propose solutions and participate to definition and resolution.</li></ul><p><b>Context and environment</b></p><br><br><br><p>Basrah Oil Company (BOC) is undertaking the Seawater Treatment Facilities (STF) project to provide treated seawater to the oil fields in southern Iraq (for injection). The STF will be located on the west side of the Khor Al Zubair, upstream of the port of Umm Qasr and will have the following key components:</p><br><br><ul><li>Site development and non-process facilities.</li><li>Ancillaries and buildings.</li><li>Seawater intake and outfall structures.</li><li>Material off-loading facility.</li><li>Seawater clarification, filtration and deoxygenating processes.</li><li>Chemical addition systems.</li><li>Shipping pumps.</li><li>Power Generation.</li><li>Utilities.</li></ul><p>FEED was completed (June 2016) with Phase 1 capacity of 7.5 million barrels of water per day (MMBWPD) of treated seawater, with a subsequent Phase 2 of 5 MMBWPD for a total buildout capacity of 12.5 MMBWPD. The project was placed on hold upon the completion of FEED.</p><br><br><p>In 2018 BOC launched a call for tender on the FEED, but instructed bidders to reduce capacity to 5.0 MMBWPD, with provision for a future addition of 2.5 MMBWPD for a total build-out phase of 7.5 MMBWPD.</p><br><br><br><p><b>Accountabilities</b></p><br><br><ul><li>Accountable for the interfaces and MoC, being internal (between units, disciplines, PMT, One Tech and Specialists) or external (between other CSSP Projects, Contractors, COMPANY, etc…). The job holder coordinates all interface and MoC matters, protecting the WI Project and COMPANY’s position with regards to all external interfaces and to internal interfaces between Contractors, and ensuring that changes are evaluated and executed for the overall benefit of the Project.</li><li>Accordingly, the job holder shall make the necessary coordination between all involved Contractors/parties and Company Teams and implement an agreed interface management procedure and methodology. She/He shall ensure the proper and timely follow-up and resolution of interfaces issues between the various involved parties documents. She/He must support the Interface Manager to ensure full control of the Management of Change process, and shall document all the changes, taking care to perform a full review with various disciplines with Project aspects to justify or reject the change.</li><li>A key aspect of interface coordination is the ability to effectively communicate, across all involved parties, all details related to an interface, including requirements, technical specifications, and potential issues. It is important that the communication channel is promptly established, the proper information is exchanged, and all involved parties acknowledge that they fully understand the interface requirements.</li><li>The nature of the development might call for a “staged” delivery of the facilities. Simultaneous activities between construction activities and operations activities can occur to meet the agreed schedule.</li></ul><br><p><b><u>Qualification:</u></b></p><br><br><ul><li><span>Degree in</span> Engineering</li></ul><p><b><u>Experience: </u></b></p><br><br><ul><li>15 years of relevant experience in Industrial Projects.</li><li>A sound multi-discipline technical background complemented by a sound knowledge on Onshore Surveys campaigns and civil works experience.</li><li>Very good communication and interpersonal skills and capacity to work in a “transverse” organisation.</li><li>Mastering English is a must, knowledge of French and Arabic is a plus.</li></ul><br><br><br><br><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Minimum 5 years of experience as an Electrical Site Engineer on construction, industrial plant, or high-rise building projects. Strong experience in electrical systems, site execution, and installation works. Holder of a valid Senior Authorised Person (SAP) certification. Good command of English (written and spoken). Hands-on experience with LV/MV systems, cabling, panel installation, testing, and commissioning. Strong teamwork, communication, and coordination skills.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelor's degree in Electrical Engineering or Electrical &amp; Electronics Engineering. Minimum 5 years of experience as an Electrical Site Engineer on construction, industrial plant, or high-rise building projects. Strong experience in electrical systems, site execution, and installation works. Holder of a valid Senior Authorised Person (SAP) certification. Good command of English (written and spoken. Overseas project experience is preferred. Hands-on experience with LV/MV systems, cabling, panel installation, testing, and commissioning. Strong teamwork, communication, and coordination skills.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are hiring a Quality CSA Lead Engineer for major Oil &amp; Gas / Industrial EPC projects. If you have deep expertise in Civil, Structural, and Architectural (CSA) QA/QC and a strong background enforcing Total Energies standards , we want to hear from you. Key Responsibilities QA/QC Management: Establish and maintain the CSA Quality Management System in line with Total Energies specifications, PQPs, and international codes (ACI, ASTM, AISC, AWS, Eurocodes). Inspection &amp; Control: Lead inspections for earthworks, concrete pour cards, structural steel fabrication/erection, welding, grouting, and architectural finishes. TPIA Coordination: Manage Hold, Witness, and Surveillance points with Third-Party Inspection Agencies and laboratories. NCR Management: Drive root cause analysis (RCA), raise/close Non-Conformance Reports, and manage punch lists to client satisfaction. Team Leadership: Mentor field QA/QC teams and represent the quality department during client and Total Energies audits.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"><b>Preferred candidate profile</b></p><ul><li>Education: Bachelors Degree in Civil Engineering.</li><li>Experience: 1215 years in CSA QA/QC within Oil &amp; Gas or Industrial EPC environments.</li><li>Leadership: Minimum 5 years of experience in a Lead or Senior QA/QC capacity.</li><li>Certification: Certified ISO 9001:2015 Lead Auditor. Certified QA/QC Engineer (CSWIP, BSI, or equivalent preferred)</li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <strong>Job Title:</strong> Wireline Engineer<br> <strong>Location:</strong> Iraq&nbsp;<br> <strong>Industry:</strong> Oil &amp; Gas&nbsp;<br> <strong>Department:</strong> Wireline Services<br><strong>Job Summary</strong><br>The Wireline Engineer is responsible for planning, executing, and supervising wireline operations for oil and gas wells in accordance with company, customer, and HSE standards. The role includes operating wireline equipment, acquiring and validating downhole data, performing perforating and logging services, maintaining operational efficiency, and ensuring safe execution of field activities.<br><strong>Required Qualifications</strong><br><ul><li>Bachelor's Degree in Engineering Discipline.</li><li>3–10+ years of wireline field experience in oil &amp; gas operations.</li><li>Experience with Open Hole and/or Cased Hole wireline services.</li></ul><br>With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil &amp; Gas, Power &amp; Renewables, Chemicals, Construction &amp; Infrastructure, Life Sciences, Mining and&nbsp;Manufacturing&nbsp;sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients. <br><br> </div>

<p>The Project Planning & Cost Engineer is responsible for developing, implementing, and maintaining project planning, scheduling, budgeting, and cost control systems for oil and gas projects. The role includes preparing project schedules and cost forecasts, monitoring project performance, analyzing cost variances, reviewing contractor invoices and change orders, preparing management reports, supporting risk assessments, and coordinating with engineering, procurement, construction, and project management teams to ensure projects are delivered safely, on time, and within budget.</p><p>Bachelor's degree in Engineering, Project Management, Construction Management, Finance, or a related discipline. Minimum of 5 years of experience in project planning and cost engineering within the Oil & Gas, Energy, EPC, Construction, or Industrial sectors. Strong knowledge of project scheduling, budgeting, forecasting, earned value management, and cost control. Proficient in Primavera P6, Microsoft Project, SAP, Oracle, or equivalent project management software. Excellent analytical, reporting, communication, and problem-solving skills. Professional certifications such as PMP, CCP, PSP, or AACE are highly desirable.</p>

<p>The Process Engineer will be responsible for designing, analyzing, and optimizing oil and gas processing systems to improve operational efficiency, safety, and reliability. The role involves developing process simulations, preparing engineering documentation including P&IDs and equipment specifications, conducting risk assessments and feasibility studies, supporting construction, commissioning, and start-up activities, and collaborating with multidisciplinary teams to integrate new technologies into existing facilities. The successful candidate will also ensure compliance with API, ASME, ISO, and environmental regulations while providing technical guidance and training to operations personnel.</p><p>Bachelor's degree in Chemical Engineering, Mechanical Engineering, Petroleum Engineering, or a related engineering discipline; a Master's degree is preferred. Minimum of 10 years of experience in oil and gas process engineering with expertise in processing facilities and system integration. Strong knowledge of HYSYS, PIPESIM, or similar process simulation software. Solid understanding of thermodynamics, fluid dynamics, process control, and international engineering standards including API, ASME, and ISO. Excellent analytical, project management, communication, and teamwork skills with the ability to work in multicultural environments.</p>

<p>The Project Planning & Cost Engineer is responsible for developing, implementing, and maintaining project planning, scheduling, budgeting, and cost control systems for oil and gas projects. The role includes preparing project schedules and cost forecasts, monitoring project performance, analyzing cost variances, reviewing contractor invoices and change orders, preparing management reports, supporting risk assessments, and coordinating with engineering, procurement, construction, and project management teams to ensure projects are delivered safely, on time, and within budget.</p><p>Bachelor's degree in Engineering, Project Management, Construction Management, Finance, or a related discipline. Minimum of 5 years of experience in project planning and cost engineering within the Oil & Gas, Energy, EPC, Construction, or Industrial sectors. Strong knowledge of project scheduling, budgeting, forecasting, earned value management, and cost control. Proficient in Primavera P6, Microsoft Project, SAP, Oracle, or equivalent project management software. Excellent analytical, reporting, communication, and problem-solving skills. Professional certifications such as PMP, CCP, PSP, or AACE are highly desirable.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Datacenter engineer is to ensure the optimal performance, reliability, and security of datacenter infrastructure while managing resources effectively to support business operations. They are responsible for maintaining system uptime, troubleshooting issues, and implementing improvements to enhance efficiency and scalability. Oversee the installation, configuration, and maintenance of hardware and software components within the datacenter. Ensure that all facility systems operate efficiently and effectively. Continuously monitor system performance and health using appropriate tools. Diagnose and resolve issues promptly to minimize downtime and service disruptions. Maintain security protocols and ensure compliance with industry standards and regulations. Conduct regular audits and assessments to identify vulnerabilities and mitigate risks. Create and maintain accurate documentation of systems, processes, and procedures. Generate regular reports on system performance, incidents, and maintenance activities. Work closely with cross-functional teams and communicate effectively with stakeholders, including operations, network, and security, to ensure seamless integration of systems.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>BSc Electrical engineer . Technical knowledge [Power, Generator and cooling] Incident Management Project Management Communication and Collaboration . 3 5-year experiences . Behavioral Competencies: Delivering Results &amp; Fostering Ownership Building Customer Value Networking &amp; Influencing Collaboratively Leading Teams Driving Change . Technical Competencies: Access network operations Data Centre operation and maintenance Technical writing and reporting Troubleshooting and technical problem solving Network monitoring Data Center Infrastructure Networking</p><p></p></section>

<p>We are seeking an experienced Procurement and Tendering Engineer with a strong background in the oil and gas industry to join our team.&nbsp;</p><p>The ideal candidate will manage procurement processes and tendering activities to support various projects, ensuring compliance with industry standards and optimal supplier management.&nbsp;</p><p>&nbsp;</p><p><strong>Key Responsibilities:</strong></p><p>Oversee the entire procurement lifecycle for oil and gas projects, including sourcing, negotiation, and contract management.</p><p>Develop and implement procurement strategies tailored to the specific needs and challenges of oil and gas operations</p><p>Evaluate and select suppliers based on technical capabilities, pricing, and adherence to safety and regulatory standards</p><p>Prepare, review, and manage technical and commercial tender documentation for oil and gas projects</p><p>Collaborate with project managers and engineering teams to identify procurement needs effectively</p><p>Ensure compliance with industry regulations, company policies, and quality standards.</p><p>Monitor and report on procurement activities and tender progress.&nbsp;</p><p>&nbsp;</p><p><strong>Qualifications:</strong></p><p>Bachelor's degree in Engineering (Petroleum, Mechanical, Chemical, or related field).</p><p>Minimum of 5 years of experience in procurement and tendering within the oil and gas sector.</p><p>Strong understanding of oil and gas industry practices, standards, and regulatory requirements.</p><p>Excellent negotiation, analytical, and problem-solving skills</p><p>Proficiency in procurement software and tools relevant to the oil and gas industry</p><p>Strong communication and interpersonal skills.&nbsp;</p>

<p>The Process Engineer will be responsible for designing, analyzing, and optimizing oil and gas processing systems to improve operational efficiency, safety, and reliability. The role involves developing process simulations, preparing engineering documentation including P&IDs and equipment specifications, conducting risk assessments and feasibility studies, supporting construction, commissioning, and start-up activities, and collaborating with multidisciplinary teams to integrate new technologies into existing facilities. The successful candidate will also ensure compliance with API, ASME, ISO, and environmental regulations while providing technical guidance and training to operations personnel.</p><p>Bachelor's degree in Chemical Engineering, Mechanical Engineering, Petroleum Engineering, or a related engineering discipline; a Master's degree is preferred. Minimum of 10 years of experience in oil and gas process engineering with expertise in processing facilities and system integration. Strong knowledge of HYSYS, PIPESIM, or similar process simulation software. Solid understanding of thermodynamics, fluid dynamics, process control, and international engineering standards including API, ASME, and ISO. Excellent analytical, project management, communication, and teamwork skills with the ability to work in multicultural environments.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are currently seeking for passionate and dynamic Maintenance professionals who pride themselves on their ability to deliver extraordinary levels of customer service and provide creative solutions to our guests.<br><br>As a Duty Engineer you are responsible for all the mechanical and technical maintenance and HVAC equipment within your property and your role will include key responsibilities such as:<br><br>• Supervise and control the preventive maintenance schedule<br>• Be responsible for the health safety of the property<br>• Follow the preventive maintenance chart strictly and maintain records for future reference<br>• Coordinate with other department’s counterparts to ensure their satisfaction on quality and progress<br>• Create departmental training programmes among engineering employees and create opportunities to multitask<br>• Distribute the work to subordinates accordingly to their capabilities in order to get the best results to the specified standards</p> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Ensure all welding activities are performed in compliance with project specifications, approved procedures, applicable codes, and company requirements. Review and approve WPSs, PQRs, and welder qualification records. Monitor field welding activities, including fit-up, welding parameters, consumables, heat input, and workmanship. Coordinate with Construction, QC, NDE, Contractors, and Vendors to ensure quality execution of welding activities. Support welding qualification, testing, inspection, and audit activities at fabrication yards and construction sites. Review and assist in the resolution of Technical Queries (TQs), Deviation Requests (DRs), and Non-Conformance Reports (NCRs). Assess contractor welding performance and identify opportunities for quality and productivity improvements. Ensure welding traceability, documentation, and records are maintained for project quality dossiers. Promote HSE compliance and safe welding practices across all work fronts. Provide regular reporting on welding performance, issues, and risks to project management.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><h2>Qualifications</h2>Engineering degree in a relevant discipline or International Welding Engineer (IWE/IIW) qualification. Minimum 20 years of Oil &amp; Gas project experience. Minimum 10 years in a Welding Engineer or similar role. Strong knowledge of API 1104, ASME, DNV, and other relevant welding standards. Proven experience with welding procedures, qualifications, and field supervision activities. Solid understanding of pipeline, flowline, piping, and structural welding. Experience working on large-scale EPC or construction projects in the Oil &amp; Gas industry. Strong analytical, communication, and stakeholder management skills. Fluent English communication skills; Arabic language skills are advantageous. Willingness to work on a 4x4 rotational assignment in Iraq<p></p></section>