وظائف 3d maya في العراق

<p><h4>About company</h4> <p>Belong, connect, grow, with KBR!<br> The KBR team delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.<br> KBR sustainable technology solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Key responsibilities</h4> <ul> <li>Develop civil and structural bill of material.</li> <li>Prepare layouts and detail drawings.</li> <li>Create civil grading and roadway models using Civil 3D and prepare 2D drawing packages from the design models.</li> <li>Collaborate with other disciplines and the project engineering team for structural design requirements.</li> <li>3D modeling of RCC foundations, piles, pile caps.</li> <li>Extraction of GA drawings. Development of RCC details, base plate and anchor bolts.</li> <li>3D modeling, drawing extractions and development of structural steel details, pipe racks, technological structures, shelters, grade mounted platforms, vessel mounted platforms, pipe supports, equipment foundations, roads and drains.</li> <li>Perform calculations and layouts including 2D and 3D models with adequate dimensions necessary to assist the engineering disciplines and fabrication/construction personnel including preparation of topographic layouts, earthworks/excavation drawings, boreholes locations, fencing, paved roads and drainage, underground piping and foundations, architectural and conceptual building drawings, control room layouts, substation layouts, machinery shelters, service platforms, pipe racks, pump foundations, vessel and vessel platform foundations, columns and other civil/structural drawings.</li> <li>Perform layout clash/interface checks, identify conflicts, take corrective action in coordination with other engineering discipline inputs.</li> <li>Issue engineering drawings and layouts for inter-discipline checks (IDCs), coordinate with other engineering disciplines in the integration of technical data inputs. Prepare final layouts and drawings integrating inputs provided by other engineering disciplines. Consult and make recommendations to engineers on feasibility of design plans and layouts.</li> <li>Estimation and preparation of material take-offs (MTOs), review vendor drawings, ensure vendor specifications are in full compliance with contract/project requirements.</li> <li>Prepare red-line markups, resolution of site queries from construction and fabrication shop queries / TQs. Preparation of detail sketches to support resolution of site and fabrication queries. Updating of 3D model.</li> <li>Prepare “as-built” drawings following completion of construction activities.</li> </ul> <h4>Essential qualifications and skills</h4> <ul> <li>10 years’ experience.</li> <li>Must have proficiency in AutoCAD and Navisworks software.</li> <li>Experience supervising small teams.</li> </ul></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Senior Civil and Structural Design Engineer -Onsite<br><br><p><b>Job Description</b></p><br><br><p><b>Job Title: Senior Civil and Structural Design Engineer</b><br><b>Company: </b>KBR-Iraq<br><b>Project: </b>Majnoon<br><b>Location</b>: Basra, Iraq<br><b>Employment Type:</b> Full-time, Contract</p><br><br><p>Required: Expats/Iraqi Nationals</p><br><br><br><p><b>About Company</b></p><br><br><p><i><u>"Belong, Connect, Grow, with KBR!</u></i></p><br><br><br><p><i>The KBR team delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</i></p><br><br><br><p><i>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets."</i></p><br><br><br><p><b>JOB TITLE: </b></p><br><br><p><b>KEY RESPONSIBILITIES:</b></p><br><br><ul><li>Develop Civil and Structural bill of materials</li><li>Prepare Layouts and detail drawings.</li><li>Create civil grading and roadway models using Civil 3D and prepare 2D drawing packages from the design models.</li><li>Collaborate with other disciplines and the project engineering team for structural design requirements.</li><li>3D modeling of RCC foundations, Piles, Pile caps,</li><li>Extraction of GA drawings. Development of RCC details, Base plate and Anchor bolts,</li><li>3D modeling, drawing extractions and Development of Structural Steel details, Piperacks, Technological Structures, Shelters, Grade Mounted platforms, Vessel mounted platforms, Pipe supports, Equipment foundations, Roads and Drains.</li><li>Perform calculations and layouts including 2D and 3D models with adequate dimensions necessary to assist the Engineering disciplines and Fabrication/Construction personnel including preparation of topographic layouts, earthworks/excavation drawings, boreholes locations, fencing, paved roads and drainage, underground piping and foundations, architectural and conceptual building drawings, control room layouts, substation layouts, machinery shelters, service platforms, pipe racks, pump foundations, vessel and vessel platform foundations, columns and other Civil/structural drawings.</li><li>Perform layout clash/interface checks, identify conflicts, take corrective action in coordination with other engineering discipline inputs.</li><li>Issue engineering drawings and layouts for Inter-Discipline Checks (IDC’s) coordinate with other engineering discipline in the integration of&nbsp;technical data inputs. Prepare final layouts and drawings integrating inputs provided by other engineering disciplines. Consult and make recommendations to Engineers on feasibility of design plans and layouts.</li><li>Estimation and preparation of material take off’s (MTO’s), review vendor drawings, ensure vendor specifications are in full compliance with contract/ project requirements.</li><li>Prepare Red-line markups, resolution of site queries from Construction and fabrication shop queries / TQs. Preparation of detail sketches to support resolution of site and fabrication queries. Updating of 3D model.</li><li>Prepare “As-Built” Drawings following completion of construction activities.</li></ul><br><p><b>ESSENTIAL QUALIFICATIONS AND SKILLS:</b></p><br><br><ul><li>+10 year’s experience.</li><li>Must – ACAD, Navisworks software</li><li>Supervising Small Teams.</li></ul><br><br><br><br> </div>

<p>Lead design initiatives for Zain Cash campaigns, ensuring high-quality and brand-aligned output. Maintain a consistent visual identity across digital, social media, offline, and internal communications. Turn marketing and business objectives into engaging visual concepts. Guide junior designers and maintain creative quality standards. Stay updated on design, digital, and fintech trends to drive creative innovation.</p><p><strong>Desired Candidate Profile</strong></p><p>Bachelor s degree in Graphic Design, Multimedia, or a related field. 2 3 years of relevant experience in multimedia design. Advanced skills in Adobe Photoshop, Illustrator, After Effects, and Premiere Pro. Proficiency in AI-powered creative tools. Experience with 3D tools such as Blender or Cinema 4D. Strong video editing, motion graphics, and post-production skills. Ability to manage multiple projects and meet dead</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Construction Supervisor -Mechanical &amp; Piping-Onsite<br><br><p><b>Job Description</b></p><br><br><p><b>Job Title: </b>Construction Supervisor -Mechanical &amp; Piping<br><b>Company: </b>KBR<br><b>Location</b>: Basra Iraq<br><b>Employment Type:</b> Full-time, Contract</p><br><br><p>Rotation: 28/28</p><br><br><p>Required Nationals Local National</p><br><br><br><p><b>About Company</b></p><br><br><p><i><u>"Belong, Connect, Grow, with KBR!</u></i></p><br><br><br><p><i>The KBR team delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</i></p><br><br><br><p><i>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets."</i></p><br><br><br><p><b><u>Roles and Responsibilities:</u></b></p><br><br><br><p>Specific responsibilities of the Construction Supervisor include:</p><br><br><p>Overall view of the role:</p><br><br><br><ul><li>Contributes to Construction Safety by reducing site exposure through modularization, standardization, and maximizing off-plot construction.</li><li>Contributes to developing brownfield/greenfield construction strategies and planning initiatives for project opportunities pre-FID.</li><li>Focuses on addressing and removing hurdles to efficient construction and actively monitors productivity on site, advising (as per the instruction) from the construction lead and the construction manager on ways to improve the productivity metrics.</li><li>Identifies and monitors brownfield/greenfield construction planning initiatives for approved projects post-FID.</li><li>Coordinate with engineering, QA/QC, and HSE teams to ensure compliance.</li><li>Working with the construction mechanical and piping lead and the construction manager to effectively execute construction deliverables for the project.</li><li>Ability to effectively work on more than one project at a time and identify and resolve site issues efficiently.</li><li>Experience in reading and understanding construction drawings (ISOs, GAD, and P&amp;ID).</li><li>Experience in reading and understanding LOSH, Test packs, hydrotesting, flushing, and all pre-commissioning requirements.</li><li>Coordinate with the Contractor/Subcontractor's day-to-day mechanical and piping construction activities at site, assembly, torquing, Installation, Reinstatement, and Final completion of the subsystem, both Brownfield and Greenfield projects.</li><li>Experience in rotating equipment construction activities. Including but not limited to the installation, managing the quality of the executed work, and alignment requirements till the mechanical completion stage.</li><li>Wide experience in static mechanical construction activities, including but not limited to piping fabrication, good knowledge of preparing piping MTOs, weld maps, and enough experience for the piping quality requirements (NDT, PWHT, Etc.).</li><li>Having strong experience in shutdown requirements, including but not limited to tie-ins and hook-up spools.</li></ul><br><p><b><u>Accountabilities/Expectations:</u></b></p><br><br><br><ul><li>Coordinate with all the team members, follow up daily with the construction lead he will be assigned to and the construction manager.</li><li>Ensure that the project planning is deliverable from Engineering and that Contracts &amp; Procurement aligns with the construction and handover sequences.</li><li>Ensure designs optimally use cold work, modularization, and off-plot construction to minimize on-site HSSE exposure.</li><li>Ensure to follow the final/approved design during construction.</li><li>Good knowledge of international standards (ASME, API, etc.)</li><li>Strong understanding of safety/HSE regulations, procedures, and PTW system.</li></ul><br><p><b><u>Education, Skills &amp; Experience:</u></b></p><br><br><ul><li>BSc., University degree in mechanical.</li></ul><br><p><b><u>Experience and Skillset</u></b></p><br><br><ul><li>Minimum 10-12 years’ Construction experience in Oil and Gas-related projects with strong proof for piping and rotating roles.</li><li>Strong leadership and teambuilding skills; supervisory experience.</li><li>Experience in Static and rotating equipment installation and Alignment.</li><li>Strong software skills, Microsoft Office, document websites, 3D module review, and prefer to have good knowledge of software design (AutoCAD).</li><li>Strong level in English language to communicate properly with the team members and all stakeholders.</li></ul><br><br><br><br><br><br><br> </div>

<p><h4>Belong, connect, grow, with KBR!</h4> <p>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</p> <p>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Role: Information Management (IM) Head</h4> <p><strong>Rotation:</strong> 28/28</p> <h4>Key responsibilities</h4> <p>The Information Management (IM) Head is responsible for assisting the IM Manager in leading the delivery, governance, and continuous improvement of information management services supporting business operations. This includes but is not limited to:</p> <ul> <li>Lead, manage, and develop the DMG team to ensure effective delivery of information management and IT services.</li> <li>Set team objectives, priorities, and performance expectations aligned with business goals.</li> <li>Monitor workload distribution, resource allocation, and service delivery performance.</li> <li>Provide coaching, mentoring, and professional development opportunities for team members.</li> <li>Conduct performance reviews and support talent development initiatives.</li> <li>Coordinate with business stakeholders and IT service providers to address operational and strategic requirements.</li> <li>Develop and implement information management strategies, standards, and processes.</li> <li>Ensure data integrity, quality, security, and accessibility across the organization.</li> <li>Maintain compliance with corporate, regulatory, and information governance requirements.</li> <li>Support data retention, classification, and records management policies.</li> <li>Lead the delivery and support of IM services to business users.</li> <li>Ensure service levels meet agreed business requirements and performance targets.</li> <li>Act as the escalation point for critical IM issues.</li> </ul> <h4>Qualifications</h4> <ul> <li>Bachelor’s degree in related discipline.</li> <li>Significant experience in information management, operations, infrastructure support.</li> </ul> <h4>Experience</h4> <p>10+ years in similar position</p> <h4>Technical skills</h4> <ul> <li>Project Information Systems (PIM, EDMS, Data Warehousing)</li> <li>Digital Delivery Platforms (2D/3D CAD, BIM, Collaboration Tools)</li> <li>Cloud Platforms (Azure, AWS, Google Cloud)</li> <li>Cybersecurity & Compliance (CUI, ISO 19650)</li> <li>Process Optimization & Change Management</li> <li>Advanced Excel, Power BI, and Reporting Tools</li> <li>IT Infrastructure & Networking (basic understanding)</li> <li>SCADA & Industrial Automation Systems (for oil & gas projects)</li> <li>Project Management Software (MS Project, Primavera, Jira)</li> </ul></p><p></p>

<p><h4>Job description</h4> <p>The lead mechanical & piping construction lead is responsible for directing, coordinating, and technically governing all field construction activities across mechanical and piping scopes within brownfield and greenfield project environments. The role provides senior level leadership, ensures disciplined execution, drives constructability integration, and supports strategic planning across multi-phase construction programs.</p> <p>This position acts as the primary technical lead for mechanical and piping construction, ensuring HSSE compliance, schedule adherence, cost efficiency, and quality compliance. The lead manages multi-discipline interfaces and ensures seamless integration between engineering, procurement, construction, and commissioning teams.</p> <h4>Accountabilities / expectations</h4> <ul> <li>Lead all mechanical and piping construction activities across multiple simultaneous work fronts, ensuring safe, efficient, and compliant execution.</li> <li>Provide technical direction, coaching, and performance oversight to construction teams and contractors.</li> <li>Manage daily/weekly construction planning, work-front readiness, and resource allocation.</li> <li>Ensure coordinated execution across civil, structural, electrical, instrumentation, and commissioning disciplines.</li> <li>Ensure mechanical and piping designs fully incorporate constructability principles, modularization, cold-work strategies, and HSSE risk reduction.</li> <li>Lead constructability reviews and provide authoritative input on installation methodologies, lifting studies, access planning, and brownfield tie-in strategies.</li> <li>Validate engineering deliverables for completeness, accuracy, and alignment with construction sequencing and systemization.</li> <li>Review and approve construction method statements, ITPs, JHAs, and technical procedures.</li> <li>Support development and implementation of construction execution plans, resource strategies, and work-front sequencing for all project phases.</li> <li>Ensure construction activities align with level 4 schedules, procurement milestones, fabrication readiness, and commissioning priorities.</li> <li>Identify productivity constraints, evaluate root causes, and implement corrective actions to improve field performance.</li> <li>Drive initiatives such as off-plot fabrication, pre-assembly, modular construction, and standardized installation practices.</li> <li>HSSE leadership by enforcing safe systems of work and ensuring compliance with KBR and client HSSE standards.</li> <li>Ensure mechanical and piping installations meet project specifications, industry codes (ASME, API, ISO), and quality requirements.</li> <li>Oversee inspection, testing, and commissioning readiness including hydrotesting, flushing, leak testing, and mechanical completion.</li> <li>Maintain strong communication with construction manager, engineering lead, procurement, QA/QC, and commissioning teams.</li> <li>Ensure timely resolution of technical queries, field design changes, and construction issues through structured interface management.</li> <li>Provide accurate reporting on progress, productivity, risks, and construction performance.</li> <li>Identify construction risks early, develop mitigation plans, and ensure proactive management of brownfield and greenfield constraints and SIMOPS.</li> <li>Promote continuous improvement through lessons learned, innovation in field execution, and adoption of best-practice methodologies.</li> </ul> <h4>Education</h4> <p>BSc. degree in mechanical engineering, piping engineering, or related discipline.</p> <h4>Experience requirements</h4> <p>10+ years experience in oil & gas mechanical/piping engineering and design.<br> 5-10 years experience leading construction activities in multidiscipline environments, including brownfield and live-plant conditions.</p> <p>Demonstrated experience in:</p> <ul> <li>Productivity measurement and resource-based planning</li> <li>Level 4 construction scheduling</li> <li>Mechanical completion, systemization, and commissioning interfaces</li> <li>Managing multiple contractors and simultaneous work fronts</li> </ul> <h4>Technical & leadership skills</h4> <ul> <li>Strong leadership and communication capabilities.</li> <li>Advanced understanding of constructability, modularization, and field execution methodologies.</li> <li>Proficiency in interpreting engineering drawings, isometrics, P&IDs, and 3D model reviews.</li> <li>Ability to lead complex brownfield and greenfield tie-ins, shutdown scopes, and SIMOPS environments.</li> <li>Strong problem solving skills with the ability to make technical decisions under pressure.</li> <li>High competency in HSSE risk management and safe construction practices.</li> </ul></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Information Management Head<br><br><p><b>"Belong, Connect, Grow, with KBR!</b></p><br><br><br><p><b>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</b></p><br><br><p><b>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets."</b></p><br><br><br><p><b>Role: </b>Information Management (IM) Head</p><br><br><p><b>Rotation: </b>28/28</p><br><br><br><p><b>Key Responsibilities</b></p><br><br><br><p>The Information Management (IM) Head is responsible for assisting the IM Manager in leading the delivery, governance, and continuous improvement of information management services supporting business operations.</p><br><br><p>This includes but is not limited to:</p><br><br><ul><li>Lead, manage, and develop the DMG team to ensure effective delivery of information management and IT services.</li><li>Set team objectives, priorities, and performance expectations aligned with business goals.</li><li>Monitor workload distribution, resource allocation, and service delivery performance.</li><li>Provide coaching, mentoring, and professional development opportunities for team members.</li><li>Conduct performance reviews and support talent development initiatives.</li><li>procedures.</li><li>Coordinate with business stakeholders and IT service providers to address operational and strategic requirements.</li><li>Develop and implement information management strategies, standards, and processes.</li><li>Ensure data integrity, quality, security, and accessibility across the organization.</li><li>Maintain compliance with corporate, regulatory, and information governance requirements.</li><li>Support data retention, classification, and records management policies</li><li>Lead the delivery and support of IM services to business users.</li><li>Ensure service levels meet agreed business requirements and performance targets.</li><li>Act as the escalation point for critical IM issues.</li></ul><br><p><b>Qualifications</b></p><br><br><ul><li>Bachelor’s degree in related discipline.</li><li>Significant experience in information management, operations, infrastructure support.</li></ul><br><p><b>Experience</b></p><br><br><p>10+ Years in similar position</p><br><br><br><p><b>Technical Skills</b></p><br><br><ul><li>Project Information Systems (PIM, EDMS, Data Warehousing)</li><li>Digital Delivery Platforms (2D/3D CAD, BIM, Collaboration Tools)</li><li>Cloud Platforms (Azure, AWS, Google Cloud)</li><li>Cybersecurity &amp; Compliance (CUI, ISO 19650)</li><li>Process Optimization &amp; Change Management</li><li>Advanced Excel, Power BI, and Reporting Tools</li><li>IT Infrastructure &amp; Networking (basic understanding)</li><li>SCADA &amp; Industrial Automation Systems (for oil &amp; gas projects)</li><li>Project Management Software (MS Project, Primavera, Jira)</li></ul><br><br><br> </div>

<p><h4>About company</h4> <p>Belong, connect, grow with KBR! The KBR team delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</p> <p>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Job purpose</h4> <p>Shaping risk management by developing guidelines and leading or participating in safety studies, safety reviews, implementing PSM and HSSE management, also acting as a consultant for commercial teams and other business partners in the early stages of project development and MOC detailed risk assessment.</p> <h4>Job responsibilities</h4> <ul> <li>Provide technical leadership, advice and support in the implementation of Safety Management Systems.</li> <li>Provide HSEQ input in the risk and safety studies performed (e.g. HAZOP, HAZID), participate in internal audits, conduct independent safety tours, and support safety improvements, including root cause analysis (RCA) and procedure development, with a particular focus on process safety.</li> <li>Improve process safety awareness across the organization, particularly among engineers and project leaders, through continuous improvement initiatives, management of change (MOC), and joint site inspections.</li> <li>Facilitate and participate in P&ID reviews, HEMP, HAZID, HAZOP, SIL, layout safety reviews, PSSR, 3D model reviews, safety audits, QRA workshops, and other relevant process and technical safety studies.</li> <li>Deliver training and actively communicate process safety management (PSM) requirements and related matters to the organization and relevant stakeholders.</li> <li>Coordinate and oversee process safety engineering activities to ensure technical objectives are achieved during new projects, MOCs, and technical studies.</li> <li>Review technical bid submissions and conduct technical bid evaluations and analyses.</li> <li>Participate in EPC contractor and vendor pre-qualification, bid evaluation, and performance evaluation.</li> <li>Ensure the quality and accuracy of EPC contractors' process safety engineering activities and review associated deliverables, including philosophies, layouts, detailed drawings, close-out reports, risk studies, and process safety system documentation.</li> <li>Participate in the commissioning, start-up, and performance testing of new projects, verifying the availability and functionality of process and technical safety systems.</li> <li>Develop process safety management procedures, monitor their implementation, and evaluate their effectiveness.</li> <li>Develop technical supply specifications, technical design guidelines, and basis for design documentation for large-scale MOCs.</li> <li>Support HSE, process safety, and asset integrity audits and coordinate the planning and implementation of resulting corrective actions.</li> <li>Participate in process incidents investigations.</li> <li>Provide process and process safety technical expertise in flow assurance, hydraulic calculations, blowdown verification, surge analysis and equipment sizing.</li> </ul> <h4>Technical qualification & skills</h4> <ul> <li>Minimum bachelor's degree in chemical engineering.</li> <li>15+ years of engineering experience in the oil and gas industry.</li> <li>10+ years of process safety engineering experience or equivalent in the oil and gas industry.</li> <li>Experience with brownfield and revamp projects.</li> <li>Practical knowledge and experience in HAZOP, LOPA, MOC, physical effects modelling, and facility siting.</li> <li>Good knowledge of CCPS/EI process safety management and risk-based process safety (RBPS) guidelines.</li> <li>PHA and RA certifications.</li> <li>Strong knowledge of process safety regulations, standards, and industry practices, including OSHA PSM, EPA RMP, and NFPA requirements.</li> </ul> <h4>Soft skills</h4> <ul> <li>Excellent analytical, problem-solving, and management skills.</li> <li>Strong communication and interpersonal skills.</li> <li>Ability to work independently and as part of a team.</li> <li>Proficiency in Microsoft Office applications, including Excel, Word, PowerPoint, and Outlook.</li> <li>English - upper intermediate proficiency (both verbal and written).</li> </ul></p><p></p>

<p><h4>Job description</h4> <p><strong>Job title:</strong> Construction supervisor - mechanical & piping</p> <p><strong>Company:</strong> KBR</p> <p><strong>Location:</strong> Basra Iraq</p> <p><strong>Employment type:</strong> Full-time, contract</p> <p><strong>Rotation:</strong> 28/28</p> <p><strong>Required nationals:</strong> Local national</p> <h4>About company</h4> <p>Belong, connect, grow, with KBR! The KBR team delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</p> <p>KBR sustainable technology solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Roles and responsibilities</h4> <p>Specific responsibilities of the construction supervisor include:</p> <p><strong>Overall view of the role:</strong></p> <ul> <li>Contributes to construction safety by reducing site exposure through modularization, standardization, and maximizing off-plot construction.</li> <li>Contributes to developing brownfield/greenfield construction strategies and planning initiatives for project opportunities pre-FID.</li> <li>Focuses on addressing and removing hurdles to efficient construction and actively monitors productivity on site, advising (as per the instruction) from the construction lead and the construction manager on ways to improve the productivity metrics.</li> <li>Identifies and monitors brownfield/greenfield construction planning initiatives for approved projects post-FID.</li> <li>Coordinates with engineering, QA/QC, and HSE teams to ensure compliance.</li> <li>Works with the construction mechanical and piping lead and the construction manager to effectively execute construction deliverables for the project.</li> <li>Ability to effectively work on more than one project at a time and identify and resolve site issues efficiently.</li> <li>Experience in reading and understanding construction drawings (ISOs, GAD, and P&ID).</li> <li>Experience in reading and understanding LOSH, test packs, hydrotesting, flushing, and all pre-commissioning requirements.</li> <li>Coordinates with the contractor/subcontractor's day-to-day mechanical and piping construction activities at site, assembly, torquing, installation, reinstatement, and final completion of the subsystem, both brownfield and greenfield projects.</li> <li>Experience in rotating equipment construction activities including but not limited to the installation, managing the quality of the executed work, and alignment requirements till the mechanical completion stage.</li> <li>Wide experience in static mechanical construction activities, including but not limited to piping fabrication, good knowledge of preparing piping MTOs, weld maps, and sufficient experience for the piping quality requirements (NDT, PWHT, etc.).</li> <li>Strong experience in shutdown requirements, including but not limited to tie-ins and hook-up spools.</li> </ul> <h4>Accountabilities/expectations</h4> <ul> <li>Coordinate with all the team members, follow up daily with the construction lead he will be assigned to and the construction manager.</li> <li>Ensure that the project planning is deliverable from engineering and that contracts & procurement aligns with the construction and handover sequences.</li> <li>Ensure designs optimally use cold work, modularization, and off-plot construction to minimize on-site HSSE exposure.</li> <li>Ensure to follow the final/approved design during construction.</li> <li>Good knowledge of international standards (ASME, API, etc.).</li> <li>Strong understanding of safety/HSE regulations, procedures, and PTW system.</li> </ul> <h4>Education, skills & experience</h4> <p>BSc., university degree in mechanical engineering.</p> <p><strong>Experience and skillset:</strong></p> <ul> <li>Minimum 10-12 years’ construction experience in oil and gas-related projects with strong proof for piping and rotating roles.</li> <li>Strong leadership and teambuilding skills; supervisory experience.</li> <li>Experience in static and rotating equipment installation and alignment.</li> <li>Strong software skills including Microsoft Office, document websites, 3D module review, and preferably good knowledge of software design (AutoCAD).</li> <li>Strong level in English language to communicate properly with the team members and all stakeholders.</li> </ul></p><p></p>

<p><strong>Overview</strong></p><p>As a CNC Department Manager, you will be responsible for managing and overseeing all CNC machining operations within the IML mold manufacturing facility. The role ensures that mold components are manufactured according to engineering drawings, specifications, and required tolerances while maintaining the highest standards of precision and quality.</p><p><strong>Responsibilities</strong></p><ul><li><p>-Manage the CNC department and directly supervise CNC programmers, operators, and technicians</p></li><li><p>-Assign tasks and distribute workloads according to production priorities, employee capabilities, and project requirements</p></li><li><p>-Prepare daily and weekly CNC machine schedules based on mold production priorities and delivery deadlines</p></li><li><p>-Monitor departmental performance and ensure production targets are achieved</p></li><li><p>-Review engineering drawings, 3D models, technical specifications, and mold component requirements before machining begins</p></li><li><p>-Review and approve CNC programs and toolpaths and ensure appropriate machining strategies are selected</p></li><li><p>-Supervise roughing, semi-finishing, finishing, drilling, and other required machining operations</p></li><li><p>-Determine appropriate cutting tools, cutting speeds, feeds, machining parameters, and workholding/fixture methods</p></li><li><p>-Ensure proper machining strategies are applied to achieve required dimensional accuracy, tolerances, and surface finishes</p></li><li><p>-Oversee the machining of critical IML mold components, particularly cores, cavities, inserts, and high-precision components</p></li><li><p>-Ensure CNC programs and machining processes minimize the risk of machine collisions, programming errors, and component damage</p></li><li><p>-Monitor the progress of each mold and compare actual machining hours against planned hours</p></li><li><p>-Identify and address causes of delays, inefficiencies, and production bottlenecks</p></li><li><p>-Supervise in-process and final inspection of machined components</p></li><li><p>-Ensure components meet engineering drawings, dimensional tolerances, and quality requirements before moving to the next manufacturing stage</p></li><li><p>-Reduce machining errors, rework, scrap, and production losses</p></li><li><p>-Work closely with the Quality Department to resolve dimensional and machining-related issues</p></li><li><p>-Coordinate closely with Design, CAD/CAM, EDM/Wire EDM, Grinding, Mold Assembly, Quality, and Production teams</p></li><li><p>-Ensure smooth transfer of technical information and components between manufacturing stages</p></li><li><p>-Support troubleshooting of manufacturing issues and provide technical recommendations to relevant departments</p></li><li><p>-Monitor cutting tool condition, consumption, availability, and replacement requirements</p></li><li><p>-Establish and maintain an effective Tool Life Management system</p></li><li><p>-Monitor tooling inventory and coordinate procurement requirements where necessary</p></li><li><p>-Ensure CNC machines are maintained in proper operating condition</p></li><li><p>-Coordinate with the Maintenance Department regarding machine breakdowns and technical issues</p></li><li><p>-Support preventive maintenance planning to minimize machine downtime</p></li><li><p>-Analyze machine downtime and utilization and identify opportunities to improve machine capacity and efficiency</p></li><li><p>-Develop and implement machining strategies to reduce machining time while maintaining required quality and precision</p></li><li><p>-Identify opportunities to improve CNC productivity, machine utilization, and workflow efficiency</p></li><li><p>-Analyze machining errors and recurring technical problems and implement corrective actions</p></li><li><p>-Evaluate new CNC technologies, machines, tooling, and machining methods and provide technical recommendations to management</p></li><li><p>-Train, coach, and develop CNC programmers, operators, and technicians</p></li><li><p>-Evaluate team performance and identify technical skill gaps and training requirements</p></li><li><p>-Promote a culture of accountability, quality, precision, and continuous improvement</p></li><li><p>-Ensure compliance with workplace safety procedures and machine operating requirements</p></li><li><p>-Maintain proper housekeeping and implementation of 5S principles within the CNC department</p></li><li><p>-Present technical and operational recommendations to senior management when required</p></li></ul><p><strong>Desired Candidate Profile</strong></p><p><strong>Qualifications</strong></p><ul><li><p>-Bachelor's degree in Mechanical Engineering, Manufacturing Engineering, Production Engineering, or any related field</p></li><li><p>-Strong practical experience in CNC machining and plastic injection mold manufacturing</p></li><li><p>-Direct experience in high-precision IML mold manufacturing is highly preferred</p></li><li><p>-Strong experience with 3-axis CNC machining</p></li><li><p>-experience with 5-axis machining is an advantage</p></li><li><p>-Strong knowledge of CAD/CAM software used in mold manufacturing</p></li><li><p>-Proven experience supervising CNC programmers, operators, and technicians</p></li><li><p>-Understanding of mold steels and other materials commonly used in injection mold manufacturing</p></li><li><p>-Ability to calculate and optimize cutting parameters, feeds, speeds, and machining conditions</p></li><li><p>-Knowledge of tool life management and machining optimization</p></li><li><p>-Strong understanding of the relationship between CNC, EDM, Wire EDM, Grinding, and Mold Assembly processes</p></li></ul>

<p><h4>Belong, connect, grow, with KBR!</h4> <p>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</p> <p>KBR provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Location</h4> <p>Iraq - KBR office<br> 28/28 rotation</p> <h4>Job purpose</h4> <p>Define piping design bases, codes, standards, and deliverables to ensure safe, reliable, and cost-effective solutions.<br> Single point of contact for piping deliverables and activities related to piping materials.<br> Interface with client, vendor, and other stakeholders for successful execution of the project.<br> Coordinate with multi-disciplinary teams (process, mechanical, civil, electrical, instrumentation) and vendors to ensure integrated piping systems.<br> Mentor engineers, drive quality, and ensure schedule adherence for piping deliverables across project phases.</p> <h4>Key responsibilities</h4> <ul> <li>Develop and review piping design basis, piping material specifications, datasheets, and technical bid evaluations.</li> <li>Ensure compliance with applicable codes and standards and project-specific requirements.</li> <li>Develop standard deliverables, various datasheets, and requisition packages related to piping.</li> <li>Experience in non-metallic piping (GRE / HDPE) procurement and specifications.</li> <li>Provide in-depth technical support for material selection involving metallic and non-metallic piping systems.</li> <li>Participate in material selection and corrosion review sessions to ensure suitable materials for service conditions.</li> <li>Review and approve technical deliverables (isometrics, P&IDs, BOMs, MOC/Change Notes, design change requests, technical queries).</li> <li>Demonstrated knowledge of material tracking throughout the project cycle.</li> <li>Understand the MOC process and employ effective change management throughout the lifecycle of the project.</li> <li>Contribute to lessons learnt from the project.</li> <li>Report to department manager/lead engineer for the project.</li> </ul> <h4>Experience</h4> <ul> <li>12+ years of experience in concept, FEED and detail engineering and EPCM experience in the oil & gas industry.</li> <li>Experience with Middle East clients like ADNOC, BP, BOC, PDO, Total Energies & Qatar Energies is highly preferred.</li> <li>Familiarity with onshore and offshore facilities and carried out greenfield and brownfield projects.</li> <li>Experience working with multicultural project teams across various project execution centers.</li> <li>Familiarity with international piping codes and standards such as ASME B31.3, ASTM, API, and NACE MR0175/ISO 15156.</li> </ul> <h4>Qualifications</h4> <ul> <li>Master or bachelor of engineering in a related field.</li> <li>Professional membership or relevant certifications (e.g., PE/Chartered Engineer) are a plus.</li> <li>Certification related to piping design or stress analysis is advantageous.</li> </ul> <h4>Technical skills</h4> <ul> <li>Strong background in piping design, engineering, stress analysis, and support design.</li> <li>Proficiency with piping design software and calculation tools (e.g., CAESAR, AutoPIPE and 3D modeling tools).</li> <li>Technical experience to prepare manhours estimation for different types of piping activities and deliverables of different phases of the project like select phase, FEED and execution.</li> <li>Familiarity with codes, standards, regulations and practices applicable to the design and construction of various facilities.</li> <li>Hands-on knowledge of codes and standards relevant to piping.</li> <li>Experience with high-pressure piping, thermal insulation, coatings, and corrosion considerations.</li> <li>Diverse working experience in project management, conceptual, FEED and detailed design, and construction.</li> <li>Knowledge of interdisciplinary work processes, interfaces, and deliverables.</li> <li>Responsible for the training and development of engineers in his/her team.</li> <li>Adherence to company processes and procedures and handle internal and external project audits.</li> <li>Proven experience in vendor qualification, technical bid evaluation, and factory audits.</li> </ul> <h4>Soft skills</h4> <ul> <li><strong>Communication:</strong> Clear, concise communication with technical and non-technical stakeholders.</li> <li><strong>Problem solving:</strong> Proactive identification and mitigation of piping-related risks.</li> <li><strong>Project management:</strong> Planning, scheduling, risk management, and deliverable tracking.</li> <li><strong>Influence & collaboration:</strong> Effective collaboration with clients, vendors, and internal teams.</li> <li><strong>Adaptability:</strong> Comfort in dynamic project environments and changing technical requirements.</li> <li><strong>Attention to detail:</strong> Rigorous approach to reviews, calculations, and documentation.</li> <li><strong>Safety mindset:</strong> Commitment to health, safety, and environment (HSE) standards.</li> <li><strong>Critical thinking:</strong> Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems.</li> </ul></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Site M&amp;P Construction Lead (Infrastructure)<br><br><p><b>Job Description</b>: Construction M&amp;P Lead</p><br><br><p><b>Company</b>: KBR Iraq</p><br><br><p><b>Location</b>: Iraq (28/28 Rotation)</p><br><br><p><b>Nationality:</b> Any</p><br><br><br><p>The Lead Mechanical &amp; Piping Construction Lead is responsible for directing, coordinating, and technically governing all field construction activities across mechanical and piping scopes within brownfield and greenfield project environments. The role provides senior level leadership, ensures disciplined execution, drives constructability integration, and supports strategic planning across multi‑phase construction programs.</p><br><br><br><p>This position acts as the primary technical Lead for mechanical and piping construction, ensuring HSSE compliance, schedule adherence, cost efficiency, and quality compliance. The Lead manages multi‑discipline interfaces and ensures seamless integration between engineering, procurement, construction, and commissioning teams.</p><br><br><br><p><b>Accountabilities / Expectations</b></p><br><br><ul><li>Lead all mechanical and piping construction activities across multiple simultaneous work fronts, ensuring safe, efficient, and compliant execution.</li><li>Provide technical direction, coaching, and performance oversight to construction teams and contractors.</li><li>Manage daily/weekly construction planning, work‑front readiness, and resource allocation.</li><li>Ensure coordinated execution across civil, structural, electrical, instrumentation, and commissioning disciplines.</li><li>Ensure mechanical and piping designs fully incorporate constructability principles, modularization, cold‑work strategies, and HSSE risk reduction.</li><li>Lead Constructability Reviews and provide authoritative input on installation methodologies, lifting studies, access planning, and brownfield tie‑in strategies.</li><li>Validate engineering deliverables for completeness, accuracy, and alignment with construction sequencing and systemization.</li><li>Review and approve construction method statements, ITPs, JHAs, and technical procedures.</li><li>Support development and implementation of construction execution plans, resource strategies, and work‑front sequencing for all project phases.</li><li>Ensure construction activities align with Level 4 schedules, procurement milestones, fabrication readiness, and commissioning priorities.</li><li>Identify productivity constraints, evaluate root causes, and implement corrective actions to improve field performance.</li><li>Drive initiatives such as off‑plot fabrication, pre‑assembly, modular construction, and standardized installation practices.</li><li>HSSE leadership by enforcing safe systems of work and ensuring compliance with KBR and client HSSE standards.</li><li>Ensure mechanical and piping installations meet project specifications, industry codes (ASME, API, ISO), and quality requirements.</li><li>Oversee inspection, testing, and commissioning readiness including hydrotesting, flushing, leak testing, and mechanical completion.</li><li>Maintain strong communication with Construction Manager, Engineering Lead, Procurement, QA/QC, and Commissioning teams.</li><li>Ensure timely resolution of technical queries, field design changes, and construction issues through structured interface management.</li><li>Provide accurate reporting on progress, productivity, risks, and construction performance.</li><li>Identify construction risks early, develop mitigation plans, and ensure proactive management of brownfield and greenfield constraints and SIMOPS.</li><li>Promote continuous improvement through lessons learned, innovation in field execution, and adoption of best‑practice methodologies.</li></ul><br><p><b>Education</b></p><br><br><p>BSc. Degree in Mechanical Engineering, Piping Engineering, or related discipline.</p><br><br><br><p><b>Experience Requirements</b></p><br><br><p>10 + years experience in Oil &amp; Gas mechanical/piping engineering and design.</p><br><br><p>5- 10 years experience leading construction activities in multidiscipline environments, including brownfield and live‑plant conditions.</p><br><br><br><p>Demonstrated experience in:</p><br><br><ul><li>Productivity measurement and resource‑based planning</li><li>Level 4 construction scheduling</li><li>Mechanical completion, systemization, and commissioning interfaces</li><li>Managing multiple contractors and simultaneous work fronts</li><li>Technical &amp; Leadership Skills</li><li>Strong leadership and communication capabilities.</li><li>Advanced understanding of constructability, modularization, and field execution methodologies.</li><li>Proficiency in interpreting engineering drawings, isometrics, P&amp;IDs, and 3D model reviews.</li><li>Ability to lead complex brownfield and greenfield tie‑ins, shutdown scopes, and SIMOPS environments.</li><li>Strong problem solving skills with the ability to make technical decisions under pressure.</li><li>High competency in HSSE risk management and safe construction practices.</li></ul><br><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Senior Process Safety Engineer<br><br><p><b>Job Description</b></p><br><br><p><b>Job Title: </b>Senior Process Safety Engineer<br><b>Company: </b>KBR<br><b>Location</b>: Basra Iraq<br><b>Employment Type:</b> Full-time, Contract</p><br><br><p>Rotation: 28/28</p><br><br><p>Required Nationals Any</p><br><br><br><p><b>About Company</b></p><br><br><p><i><u>"Belong, Connect, Grow, with KBR!</u></i></p><br><br><br><p><i>The KBR team delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</i></p><br><br><br><p><i>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets."</i></p><br><br><br><p><b>Job Purpose</b></p><br><br><br><p>Shaping risk management by developing guidelines and leading/participating in safety studies, safety reviews, implementing PSM/HSSE Management, also acting as a consultant for commercial teams and other business partners in the early stages of project development &amp; MOC detailed Risk assessment</p><br><br><br><p><b>Job Responsibilities</b></p><br><br><br><ul><li><span>Provide technical leadership, advice and support in the implementation of Safety Management Systems.</span></li><li><span>Provide HSEQ input in the Risk and Safety studies performed (e.g. HAZOP, HAZID), participate in internal audits, conducts independent safety tours; and support safety improvements, including Root Cause Analysis (RCA) and procedure development, with a particular focus on process safety.</span></li><li><span>Improve process safety awareness across the organization, particularly among engineers and project leaders, through continuous improvement initiatives, Management of Change (MOC), and joint site inspections.</span></li><li><span>Facilitate and participate in P&amp;ID reviews, HEMP, HAZID, HAZOP, SIL, layout safety reviews, PSSR, 3D model reviews, safety audits, QRA workshops, and other relevant process and technical safety studies.</span></li><li><span>Deliver training and actively communicate Process Safety Management (PSM) requirements and related matters to the organization and relevant stakeholders.</span></li><li><span>Coordinate and oversee process safety engineering activities to ensure technical objectives are achieved during new projects, MOCs, and technical studies.</span></li><li><span>Review technical bid submissions and conduct technical bid evaluations and analyses. </span></li><li><span>Participate in EPC contractor and vendor pre-qualification, bid evaluation, and performance evaluation.</span></li><li><span>Ensure the quality and accuracy of EPC contractors' process safety engineering activities and review associated deliverables, including philosophies, layouts, detailed drawings, close-out reports, risk studies, and process safety system documentation.</span></li><li><span>Participate in the commissioning, start-up, and performance testing of new projects, verifying the availability and functionality of Process and Technical Safety Systems.</span></li><li><span>Develop Process Safety Management procedures, monitor their implementation, and evaluate their effectiveness.</span></li><li><span>Develop Technical Supply Specifications, Technical Design Guidelines, and Basis for Design documentation for large-scale MOCs.</span></li><li><span>Support HSE, Process Safety, and Asset Integrity audits and coordinate the planning and implementation of resulting corrective actions.</span></li><li><span>Participate in Process Incidents Investigations.</span></li><li><span>Provide Process and Process Safety technical expertise in Flow Assurance, Hydraulic Calculations, Blowdown Verification, Surge Analysis &amp; Equipment Sizing.</span></li></ul><br><p><b>Technical Qualification &amp; Skills</b></p><br><br><ul><li><span>Minimum Bachelor's degree in Chemical Engineering.</span></li><li><span>15+ of engineering experience in the Oil and Gas industry.</span></li><li><span>10+ years of Process Safety engineering experience or equivalent in the Oil and Gas industry.</span></li><li><span>Experience with Brownfield / Revamp projects.</span></li><li><span>Practical knowledge and experience in HAZOP, LOPA, MOC, Physical Effects Modelling, and Facility Siting.</span></li><li><span>Good knowledge of CCPS/EI Process Safety Management and Risk-Based Process (RBPS) guidelines.</span></li><li><span>PH &amp; RA certifications.</span></li><li><span>Strong knowledge of process safety regulations, standards, and industry practices, including OSHA PSM, EPA RMP, and NFPA requirements</span></li></ul><br><p><b>Soft skills</b></p><br><br><ul><li><span>Excellent analytical, problem-solving, and management skills.</span></li><li><span>Strong communication and interpersonal skills.</span></li><li><span>Ability to work independently and as part of a team.</span></li><li><span>Proficiency in Microsoft Office applications, including Excel, Word, PowerPoint and Outlook.</span></li><li><span>English - upper intermediate proficiency (both verbal &amp; written)</span></li></ul><br><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Senior Piping Engineer - Materials (Iraq)<br><br><br><p><b><i>"</i></b><b><i>Belong, Connect, Grow, with KBR! </i></b></p><br><br><br><p><b><i>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</i></b></p><br><br><br><p><b><i>KBR provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets."</i></b></p><br><br><br><p><b>Title:</b>&nbsp;Senior Piping Engineer – Materials</p><br><br><p><b>Location:</b>&nbsp;Iraq - KBR office</p><br><br><p>28/28 rotation</p><br><br><br><p><b>Job Purpose</b></p><br><br><ul><li>Define piping design bases, codes, standards, and deliverables to ensure safe, reliable, and cost-effective solutions.</li><li>Single point of contact for Piping deliverables and Activities related to Piping Materials </li><li>Interface with client, Vendor and other stakeholders for successful execution of the project</li><li>Coordinate with multi-disciplinary teams (process, mechanical, civil, electrical, instrumentation) and vendors to ensure integrated piping systems.</li><li>Mentor engineers, drive quality, and ensure schedule adherence for piping deliverables across project phases.</li></ul><br><p><b>Key Responsibilities</b></p><br><br><ul><li>Develop and review piping design basis, piping material specifications, datasheets, and technical bid evaluations.</li><li>Ensure compliance with applicable codes and standards and project-specific requirements.</li></ul><ul><li>Development of standard deliverables, various datasheets, and requisition packages related to piping.</li><li>Experience in Non-metallic Piping (GRE / HDPE) Procurement and specs.</li><li>Provide in-depth technical support for material selection involving metallic and Non-metallic piping systems.</li><li>Participate in material selection and corrosion review sessions to ensure suitable materials for service conditions.</li><li>Review and approve technical deliverables (isometrics, P&amp;IDs, BOMs, MOC/Change Notes, design change requests, technical queries).</li><li>Demonstrated knowledge of the Material Tracking throughout the project cycle.</li><li>Understand the MOC process and employ effective change management throughout the lifecycle of the project</li><li>Contribute to Lesson Learnt from the Project</li><li>Report to Department Manager/ Lead Engineer for the project.</li></ul><br><p><b>Experience</b></p><br><br><ul><li>12+ years of experience in Concept, FEED and Detail Engineering and EPCM experience in the Oil &amp; Gas industry.</li><li>Experience in Middle East clients like ADNOC, BP, BOC, PDO, Total Energies &amp; Qatar Energies others are highly preferred.</li><li>Familiarity of Onshore and Offshore facilities and carried out Greenfield and Brownfield Projects.</li><li>Experience in working with multicultural project teams across the various project execution center’s</li><li>Familiarity with international piping codes and standards such as ASME B31.3, ASTM, API, and NACE MR0175/ISO 15156.</li></ul><br><p><b>Qualifications</b></p><br><br><ul><li>Master or Bachelor of Engineering in a related field.</li><li>Professional membership or relevant certifications (e.g., PE/Chartered Engineer) are a plus.</li><li>Certification related to piping design or stress analysis is advantageous.</li></ul><br><p><b>Technical Skills</b></p><br><br><ul><li>Strong background in piping design, engineering, stress analysis, and support design.</li><li>Proficiency with piping design software and calculation tools (e.g., CAESAR, AutoPIPE and 3D modeling tools).</li><li>Technical experience to prepare manhours estimation for different types of piping activities &amp; deliverables of different phases of the project like Select phase, FEED &amp; Execution etc.</li><li>Familiarity with codes, standards, regulations and practices applicable to the design and construction of Various facilities.</li><li>Hands on knowledge of codes and standards relevant to piping.</li><li>Experience with high-pressure piping, thermal insulation, coatings, and corrosion considerations.</li><li>Diverse working experience in project management, conceptual, FEED and detailed design, and construction.</li><li>Knowledge of Interdisciplinary Work Processes/Interface/Deliverables</li><li>Responsible for the training and development of engineers in his/her Team.</li><li>Adherence to company processes and procedures and handle internal and external project audits.</li><li>Proven experience in vendor qualification, technical bid evaluation, and factory audits.</li></ul><br><p><b>Soft Skills</b></p><br><br><ul><li><b>Communication:</b>&nbsp;Clear, concise communication with technical and non-technical stakeholders.</li><li><b>Problem Solving:</b>&nbsp;Proactive identification and mitigation of piping-related risks.</li><li><b>Project Management:</b>&nbsp;Planning, scheduling, risk management, and deliverable tracking.</li><li><b>Influence &amp; Collaboration:</b>&nbsp;Effective collaboration with clients, vendors, and internal teams.</li><li><b>Adaptability:</b>&nbsp;Comfort in dynamic project environments and changing technical requirements.</li><li><b>Attention to Detail:</b>&nbsp;Rigorous approach to reviews, calculations, and documentation.</li><li><b>Safety Mindset:</b>&nbsp;Commitment to health, safety, and environment (HSE) standards.</li><li><b>Critical Thinking: </b>Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems</li></ul><br><br><br> </div>

<p><strong>Requirements:</strong></p><ul><li>University degree in Architecture or a related field.</li><li>Practical experience in the field of architecture.</li><li>Proficiency in using engineering and architectural software.</li><li>Proficiency in using <strong>3D Max</strong> and preparing 3D designs and models.</li><li>Ability to read and prepare engineering blueprints.</li><li>Diligent personality with the ability to take responsibility and complete tasks efficiently.</li><li>Ability to work within a team and collaborate with various parties.</li></ul><p><strong>Notes:</strong></p><ul><li>No specific gender required.</li><li>All nationalities can apply.</li><li>Preference will be given to candidates currently residing in Iraq.</li><li><strong>Working hours:</strong> From 9:00 AM to 4:00 PM<br><strong>Nationality:</strong> All nationalities are welcome</li></ul>