وظائف مهندس تصميم ميكانيكي - البصره العراق

<p><h4>E&I Engineer</h4> <p>KBR Sustainable Technology Solutions (STS) provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design capabilities, and smart solutions to optimize planned and operating assets.</p> <p>Responsible for start-up and plant operations activities including equipment and system checkout, inspection for proper installation, review for correct design, and calculation of expected system and equipment operating parameters under temporary start-up conditions. Coordinates start-up operations, including the direction of craft, and all other start-up activities such as flushing, chemical cleaning, and initial equipment and system operation. Coordinates performance tests and calculates test results and heat balances. Performs calculations required to properly evaluate design changes, provides engineering reports for the engineering department to assist in design change preparation. Works with client at the site.</p> <p>Under general supervision, performs all conventional aspects of the functional area subject matter. Devises new approaches to problems encountered. Plans, schedules, and conducts work requiring judgment in the independent evaluation, selection, and adaptation of engineering techniques, procedures, and criteria. Performs work which involves conventional engineering practice but may include a variety of complex features such as conflicting design requirements, unsuitability of conventional materials, and difficult coordination requirements. Provides technical guidance to designers and less experienced engineers.</p> <p>Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability, or operations. Skills are typically acquired through an undergraduate degree in engineering and a minimum of 10 years related experience, with average experience ranging from 10-15 years.</p></p><p></p>

<p><h4>E&I Engineer</h4> <p>KBR Sustainable Technology Solutions (STS) provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design capabilities, and smart solutions to optimize planned and operating assets.</p> <p>Responsible for start-up and plant operations activities including equipment and system checkout, inspection for proper installation, review for correct design, and calculation of expected system and equipment operating parameters under temporary start-up conditions. Coordinates start-up operations, including the direction of craft, and all other start-up activities such as flushing, chemical cleaning, and initial equipment and system operation. Coordinates performance tests and calculates test results and heat balances. Performs calculations required to properly evaluate design changes, provides engineering reports for the engineering department to assist in design change preparation. Works with client at the site.</p> <p>Under general supervision, performs all conventional aspects of the functional area subject matter. Devises new approaches to problems encountered. Plans, schedules, and conducts work requiring judgment in the independent evaluation, selection, and adaptation of engineering techniques, procedures, and criteria. Performs work which involves conventional engineering practice but may include a variety of complex features such as conflicting design requirements, unsuitability of conventional materials, and difficult coordination requirements. Provides technical guidance to designers and less experienced engineers.</p> <p>Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability, or operations. Skills are typically acquired through an undergraduate degree in engineering and a minimum of 10 years related experience, with average experience ranging from 10-15 years.</p></p><p></p>

<p><h4>Division</h4> <p>CSSP (Ratawi Hub – Iraq)</p> <p><strong>Direction:</strong> IM</p> <p><strong>Situation in organization</strong><br> Within the Project Organization, the Lead Interface Engineer reports to the Interface Manager.</p> <p><strong>Job location(s):</strong> CPP Office (Abu Dhabi, UAE) during detailed engineering phase / site (Iraq) during construction phase.</p> <h4>Job dimensions</h4> <p>The Lead Interface Engineer shall assist the Interface Manager on the following:</p> <ul> <li>Take care of the overall management of interface and data changes between stakeholders of the Common Seawater Supply Project, and provide advice on any schedule and commercial issues arising from such interfaces and changes.</li> <li>Ensure that interface management procedures are in place and that EPC and other contractors implement the required interface management system throughout the project duration.</li> </ul> <p>The Lead Interface Engineer is anticipated to start early 2026 and will be based in Abu Dhabi (UAE).</p> <h4>Activities</h4> <p>The job holder shall assist the Interfaces Manager:</p> <ul> <li>With the support of the Project Management Consultant, define, implement and maintain the methodology/procedure to be applied and the corresponding database to be created, to ensure a clear and accurate identification and management of interfaces. This procedure will be as efficient and simple as possible and will be used throughout the life of the project and shall be applied by the different entities/contractors.</li> <li>Management of interface and change data between parties, monitor and control interface and change issues, in order to resolve interface and change issues in a timely and organised manner according to the project interface and change control procedures.</li> <li>Attend major interface meetings, internal and external with other entities of CSSP Project, contractor representatives, vendors, TotalEnergies specialists, partner’s experts, etc. Lead interface and other technical meetings as required.</li> <li>Ensure that HSE requirements are systematically considered all along the interface management process and in particular that interfaces are properly addressed during HAZID/HAZOP/PTR project audits.</li> <li>Consolidate and advise the Project Director and Technical and Project Control Managers of any risks, especially schedule and commercial issues arising from interfaces and changes. Shall be the coordinator of the Management of Change, providing the justification through all disciplines of the change. Ensure complete documentation of all changes, and communication of these in compliance with the processes agreed with BOC and regulatory authorities.</li> <li>Prepare technical papers to support management positions for clarifications or decisions with regulatory authorities of host countries, other entities or partners.</li> <li>Ensure that EPC Contractor implements required interface management system and resources and monitor throughout the project duration that EPC Contractor honours its responsibilities as defined in the project interface procedure.</li> <li>Ensure the implementation of interface changes/optimisations resulting from negotiations of the external interfaces.</li> <li>Together with Project Management Consultant, ensure design consistency and continuity throughout the facilities.</li> <li>Avoid change orders and delays caused by interface issues; ensure timely follow-up of interface issues.</li> <li>Assist the Project Management Consultant, prior to and during construction phase, by anticipating operational interfaces with other parties (clashes or conflicting program).</li> <li>In case of SIMOPS (phased delivery of the plant): propose solutions and participate in definition and resolution.</li> </ul> <h4>Context and environment</h4> <p>Basrah Oil Company (BOC) is undertaking the Seawater Treatment Facilities (STF) project to provide treated seawater to the oil fields in southern Iraq (for injection). The STF will be located on the west side of the Khor Al Zubair, upstream of the port of Umm Qasr and will have the following key components:</p> <ul> <li>Site development and non-process facilities.</li> <li>Ancillaries and buildings.</li> <li>Seawater intake and outfall structures.</li> <li>Material off-loading facility.</li> <li>Seawater clarification, filtration and deoxygenating processes.</li> <li>Chemical addition systems.</li> <li>Shipping pumps.</li> <li>Power generation.</li> <li>Utilities.</li> </ul> <p>FEED was completed (June 2016) with Phase 1 capacity of 7.5 million barrels of water per day (MMBWPD) of treated seawater, with a subsequent Phase 2 of 5 MMBWPD for a total buildout capacity of 12.5 MMBWPD. The project was placed on hold upon the completion of FEED.</p> <p>In 2018 BOC launched a call for tender on the FEED, but instructed bidders to reduce capacity to 5.0 MMBWPD, with provision for a future addition of 2.5 MMBWPD for a total build-out phase of 7.5 MMBWPD.</p> <h4>Accountabilities</h4> <p>Accountable for the interfaces and management of change (MoC), being internal (between units, disciplines, PMT, One Tech and specialists) or external (between other CSSP projects, contractors, company, etc.). The job holder coordinates all interface and MoC matters, protecting the WI Project and company’s position with regards to all external interfaces and to internal interfaces between contractors, and ensuring that changes are evaluated and executed for the overall benefit of the project.</p> <p>Accordingly, the job holder shall make the necessary coordination between all involved contractors/parties and company teams and implement an agreed interface management procedure and methodology. He/she shall ensure the proper and timely follow-up and resolution of interface issues between the various involved parties documents. He/she must support the Interface Manager to ensure full control of the Management of Change process, and shall document all the changes, taking care to perform a full review with various disciplines with project aspects to justify or reject the change.</p> <p>A key aspect of interface coordination is the ability to effectively communicate, across all involved parties, all details related to an interface, including requirements, technical specifications, and potential issues. It is important that the communication channel is promptly established, the proper information is exchanged, and all involved parties acknowledge that they fully understand the interface requirements.</p> <p>The nature of the development might call for a “staged” delivery of the facilities. Simultaneous activities between construction activities and operations activities can occur to meet the agreed schedule.</p> <h4>Qualification</h4> <ul> <li>Degree in engineering.</li> </ul> <h4>Experience</h4> <ul> <li>15 years of relevant experience in industrial projects.</li> <li>A sound multi-discipline technical background complemented by a sound knowledge on onshore surveys campaigns and civil works experience.</li> <li>Very good communication and interpersonal skills and capacity to work in a “transverse” organisation.</li> <li>Mastering English is a must, knowledge of French and Arabic is a plus.</li> </ul></p><p></p>

<p><h4>Division</h4> <p>CSSP (Ratawi Hub – Iraq)</p> <p><strong>Direction:</strong> IM</p> <p><strong>Situation in organization</strong><br> Within the Project Organization, the Lead Interface Engineer reports to the Interface Manager.</p> <p><strong>Job location(s):</strong> CPP Office (Abu Dhabi, UAE) during detailed engineering phase / site (Iraq) during construction phase.</p> <h4>Job dimensions</h4> <p>The Lead Interface Engineer shall assist the Interface Manager on the following:</p> <ul> <li>Take care of the overall management of interface and data changes between stakeholders of the Common Seawater Supply Project, and provide advice on any schedule and commercial issues arising from such interfaces and changes.</li> <li>Ensure that interface management procedures are in place and that EPC and other contractors implement the required interface management system throughout the project duration.</li> </ul> <p>The Lead Interface Engineer is anticipated to start early 2026 and will be based in Abu Dhabi (UAE).</p> <h4>Activities</h4> <p>The job holder shall assist the Interfaces Manager:</p> <ul> <li>With the support of the Project Management Consultant, define, implement and maintain the methodology/procedure to be applied and the corresponding database to be created, to ensure a clear and accurate identification and management of interfaces. This procedure will be as efficient and simple as possible and will be used throughout the life of the project and shall be applied by the different entities/contractors.</li> <li>Management of interface and change data between parties, monitor and control interface and change issues, in order to resolve interface and change issues in a timely and organised manner according to the project interface and change control procedures.</li> <li>Attend major interface meetings, internal and external with other entities of CSSP Project, contractor representatives, vendors, TotalEnergies specialists, partner’s experts, etc. Lead interface and other technical meetings as required.</li> <li>Ensure that HSE requirements are systematically considered all along the interface management process and in particular that interfaces are properly addressed during HAZID/HAZOP/PTR project audits.</li> <li>Consolidate and advise the Project Director and Technical and Project Control Managers of any risks, especially schedule and commercial issues arising from interfaces and changes. Shall be the coordinator of the Management of Change, providing the justification through all disciplines of the change. Ensure complete documentation of all changes, and communication of these in compliance with the processes agreed with BOC and regulatory authorities.</li> <li>Prepare technical papers to support management positions for clarifications or decisions with regulatory authorities of host countries, other entities or partners.</li> <li>Ensure that EPC Contractor implements required interface management system and resources and monitor throughout the project duration that EPC Contractor honours its responsibilities as defined in the project interface procedure.</li> <li>Ensure the implementation of interface changes/optimisations resulting from negotiations of the external interfaces.</li> <li>Together with Project Management Consultant, ensure design consistency and continuity throughout the facilities.</li> <li>Avoid change orders and delays caused by interface issues; ensure timely follow-up of interface issues.</li> <li>Assist the Project Management Consultant, prior to and during construction phase, by anticipating operational interfaces with other parties (clashes or conflicting program).</li> <li>In case of SIMOPS (phased delivery of the plant): propose solutions and participate in definition and resolution.</li> </ul> <h4>Context and environment</h4> <p>Basrah Oil Company (BOC) is undertaking the Seawater Treatment Facilities (STF) project to provide treated seawater to the oil fields in southern Iraq (for injection). The STF will be located on the west side of the Khor Al Zubair, upstream of the port of Umm Qasr and will have the following key components:</p> <ul> <li>Site development and non-process facilities.</li> <li>Ancillaries and buildings.</li> <li>Seawater intake and outfall structures.</li> <li>Material off-loading facility.</li> <li>Seawater clarification, filtration and deoxygenating processes.</li> <li>Chemical addition systems.</li> <li>Shipping pumps.</li> <li>Power generation.</li> <li>Utilities.</li> </ul> <p>FEED was completed (June 2016) with Phase 1 capacity of 7.5 million barrels of water per day (MMBWPD) of treated seawater, with a subsequent Phase 2 of 5 MMBWPD for a total buildout capacity of 12.5 MMBWPD. The project was placed on hold upon the completion of FEED.</p> <p>In 2018 BOC launched a call for tender on the FEED, but instructed bidders to reduce capacity to 5.0 MMBWPD, with provision for a future addition of 2.5 MMBWPD for a total build-out phase of 7.5 MMBWPD.</p> <h4>Accountabilities</h4> <p>Accountable for the interfaces and management of change (MoC), being internal (between units, disciplines, PMT, One Tech and specialists) or external (between other CSSP projects, contractors, company, etc.). The job holder coordinates all interface and MoC matters, protecting the WI Project and company’s position with regards to all external interfaces and to internal interfaces between contractors, and ensuring that changes are evaluated and executed for the overall benefit of the project.</p> <p>Accordingly, the job holder shall make the necessary coordination between all involved contractors/parties and company teams and implement an agreed interface management procedure and methodology. He/she shall ensure the proper and timely follow-up and resolution of interface issues between the various involved parties documents. He/she must support the Interface Manager to ensure full control of the Management of Change process, and shall document all the changes, taking care to perform a full review with various disciplines with project aspects to justify or reject the change.</p> <p>A key aspect of interface coordination is the ability to effectively communicate, across all involved parties, all details related to an interface, including requirements, technical specifications, and potential issues. It is important that the communication channel is promptly established, the proper information is exchanged, and all involved parties acknowledge that they fully understand the interface requirements.</p> <p>The nature of the development might call for a “staged” delivery of the facilities. Simultaneous activities between construction activities and operations activities can occur to meet the agreed schedule.</p> <h4>Qualification</h4> <ul> <li>Degree in engineering.</li> </ul> <h4>Experience</h4> <ul> <li>15 years of relevant experience in industrial projects.</li> <li>A sound multi-discipline technical background complemented by a sound knowledge on onshore surveys campaigns and civil works experience.</li> <li>Very good communication and interpersonal skills and capacity to work in a “transverse” organisation.</li> <li>Mastering English is a must, knowledge of French and Arabic is a plus.</li> </ul></p><p></p>

<p>Rutledge group started out in 1981 provides quality safety services to the oil &amp; gas, petrochemical, specialty chemicals, engineering and construction industries. We provide total safety management support services on site, in areas of safety H2S, HSE, training, rental of safety equipment, service and maintenance of equipment.</p><p>&nbsp;</p><p><strong>Job Description</strong></p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Conduct well site survey for offshore, onshore installations, prepare schematics of both gas detection and breathing air cascade system, Installation of fixed-point sensors, wireless gas detection based on client well plan.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Supervise the H2S Unit / Container installation at the site and rig up/ setting up all necessary fixed or remote gas detection systems, alarms and ensure their safety aspects.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Continuously monitor all the H2S equipment, the gas detection system and H2S alarm control panel on the site</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Maintain, Service and Testing of all in-house and client equipment to ensure they are in ready-to-go state.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Trouble shoot, repair, test, and commission the full range of safety equipment in the field.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Monitor and record H2S gas concentration on various activities such as Well Test Operations, Sour gas flaring, Coring, DST, TCP operations.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Gas sampling such as H2S, LEL, CO2, SO2 and other gases if and as required.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Conduct On site H2S Safety Induction, trainings, conduct emergency safety drills and ensure personnel proficiency in usage of the Breathing Equipment.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Prepare site specific H2S induction training if required by Client.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Participate safety meetings and toolbox talks.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Participate in STOP card &amp; NUHS programme</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Prepare Contingency Plans, Emergency Response Plan, Equipment maintenance report on equipment and internal audits.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Discuss the observations and areas of improvements with onsite HSE and Company’s representatives.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Conduct regular Simulated Drills (i.e.H2S Drills, Man Down Drill, Muster Drill as per Company’s guidelines and schedules.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Supervise the emergency situations because of H2S release, provide recommendations to handle the situations and suggest the best practice methods to work under mask to control the situations for different operations e.g. well control etc.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Prepare and submit the field Rutledge ISO reports on inspections, repairs, calibrations, testing, training records, inventories, drills etc. to Company representative and operations manager as required.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Assist in confined space entry &amp; gas testing.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Prepare and submit the Customer Satisfaction Quality Questionnaire.</p><p><strong>Requirements</strong></p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Candidate must possess at least a Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Petroleum/Oil/Gas), Geology/Geophysics or equivalent.</p><p>·&nbsp; &nbsp; &nbsp; &nbsp; Preferable with 2-5 years working experience in the oil &amp; gas industry or petrochemical facilities.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Previous work experience as an offshore rig personnel such as electrical, drilling, mudlogging or safety is a definite advantage.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Candidates without prior experience but have worked in drilling well sites or petrochemical facilities are welcome to apply.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Able to stay at Client’s well sites for an extended duration.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; A positive attitude with good problem-solving skills, creativity, displaying initiative and willing to work in a multi-cultural environment.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Capable of representing Company before Clients and for business development.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Bilingual in English and Arabic.</p>

<p>Determine, review and establish the local and international policies, standards and specifications required for mechanical engineering work related to building construction and refurbishment, water supply stations and water wells, water supply networks for the project in Iraq. Carry out inspections of the water supply facilities to be constructed, assess the current situation of the mechanical systems, and design suitable upgrades/replacement of existing mechanical systems to meet the local and international standards and specifications applicable, and in consultation with all stakeholders. And or, propose, design the replacements and new installations. Prepare and/or review detailed mechanical engineering design documentation including drawings, specifications and scope of work reports to be included in water supply facilities construction tender documents. Prepare quality control and quality assurance documentation related to mechanical engineering work for new water supply facilities. and rehabilitation works. Assist the PM, Deputy PM, Water Supply Engineer and the QA/QC Engineer in the preparation of bidding documents for the new water supply facilities. Supervise on-site works carried out by contractors closely on a day to day basis to ensure quality of the works is monitored and controlled as per specification requirements. Prepare and submit progress reports to the Project Manager/Deputy PM at intervals agreed upon. Ensure safety and health of everyone involved in the project and general public by identifying risks and threats, planning, implementing and maintaining internationally acceptable safety standards in all aspects, at all stages of the project. Ensure all design and construction of water supply facilities and mechanical works is carried out in accordance with and in compliance with industry standards and international best practice energy efficiency principles, standards, guidelines and specification. Provide expert advice to all stakeholders including contractors, PM/Deputy PM, project staff , clients and donor agencies on Mechanical engineering related water supply facilities works where required. Preparing Mechanical drawing package including for new and or rehabilitation works. Preparing Mechanical SOW (scope of work) with technical specification including water wells, pump stations, water supply networks and related works, plumbing and fire protection systems. Designing and preparing a package of water supply and sanitation systems for small and medium scale projects. Using S-pipe and D-pipe or any other relevant and applicable software Create and review technical drawings, plans, and specifications using computer software and prepare design packages in line with client`s design planning manual and design reviewers instructions. Coordinate while required, with design reviewers and incorporate their comments if any. Perform detailed documentation to track project development and design process Ensure project timeline is met and project stays within budget Support the project team in the evaluation and endorsement of objectives and goals of contractor plans, including staffing and budgeting, milestone descriptions, risk management strategies, detailed schedules and scope descriptions, and work breakdown structures Check to assure all materials and /equipment have been tested, submitted and approved. Review all submittals to insure compliance with the plans and specification Inspect all material, equipment and mechanical tools delivered, at the time of receipt, to ensure compliance with submittals, and specifications. Resolve technical problems at site and the certification of construction work at site. Recommend design changes, cost reductions, warranty improvements, and manufacturing issues. Perform other duties as may be assigned. Establishment of procedures with time limits for inspection, sampling and testing of works and all other electrical requirements. Implementation and monitoring of quality assessments. Supervises the Quality Control functions/activities of a project or its parts, including Quality Control inspection schedules and the collection of Quality Records. Review all submittals to insure compliance with the plans and specifi cation Daily/Weekly/ Monthly report to the Project Manager on project progress activities. Project reporting Mechanical Engineer is to be reported to Project Manager (PM)</p><p><strong>Desired Candidate Profile</strong></p><p>Excellent oral and written communication skills. Strong interpersonal skills and ability to work as part of a team Very Good Knowledge in written and oral English and Arabic languages is required. Experience in the usage of computers and software packages (Autodesk AutoCAD, Microsoft office and mechanical design software).</p>

<p>Under general autonomy and wide scope: The Well Engineering Manager functions as a technical Subject Matter Expert (SME), typically at the Country level staying abreast of current industry and PSL technological developments.</p><p>This position is accountable for the implementation of Engineering processes with respect to quality and integrity assurance. Reviews and maintains HMS processes to ensure the management system remains up-to-date with industry best practices. Responsible for approval of Well Designs and/or Programs and ensures these are in compliance with contracts, as well as, the Company's HMS policies &amp; procedures. Ensures all Operational Activities are adequately evaluated and a full Risk Matrix table with Mitigation plans is completed. Responsible for resolving critical engineering/operational issues, identifying chronic problems and proposing solutions, ensuring optimum technical solutions for field project development, and compliance with all Project/Contract metrics. Coordinates engineering programs/procedures and practices among different Projects and/or Rigs. Supports development of new technology and champions the application and deployment of the same. Leads technical presentations to client. Provides work direction and mentorship on a regular basis to Engineers. Responsible for the training &amp; development of Well Engineers and their competency development. Operates with significant level of technical and/or operational independence in all assigned areas.</p><h4>Additional Role Responsibilities:</h4><ul><li>Ability and flexibility to travel to Iraq both domestically and internationally typically 28/28 days per business required.</li><li>Provides Managership and guidance to both planning and operational teams.</li><li>Demonstrates support of the management system</li><li>Manages all well planning, design and engineering activities associated with drilling, completions and abandonment operations.</li><li>Ensures the team properly consider design options, assess risks and validate costs and work closely with other Wells/technical teams, legislative bodes and service providers at various stages of the well planning process to ensure viability of proposals.</li><li>Manages well operations to effectively control the risk, technical execution, cost control and ensures compliance with policies and procedures.</li><li>Manages operational deviations from Company policy with suitable adherence to the risk assessment process.</li><li>Manages platform rig engineering in the planning and execution of rig maintenance, rig modifications, recertification and upgrades.</li><li>Ensures peer reviews, risk assessments, engineering/planning reviews, etc. are undertaken.</li><li>Sets performance targets and implements performance measurement and improvement processes.</li><li>Ensures that the lessons learned system is utilized to record lessons and used to transfer lessons into detail well planning to complete the full learning cycle.</li></ul><p>Requires an undergraduate degree in STEM, preferably in Petroleum or Mechanical Engineering, and 12+ years experience as a Well Engineer with knowledge of drilling, completions, intervention operations and techniques. Demonstrated experience in leading or supervising an engineering team. Must have a Well Control certificate.</p><p>Preferred Experience: Minimum of 15-years relevant experience in their discipline or in an operations environment within the oil &amp; gas industry.</p><p><strong>Desired Candidate Profile</strong></p><p>Requires an undergraduate degree in STEM, preferably in Petroleum or Mechanical Engineering, and 12+ years experience as a Well Engineer with knowledge of drilling, completions, intervention operations and techniques. Demonstrated experience in leading or supervising an engineering team. Must have a Well Control certificate.</p><p>Preferred Experience: Minimum of 15-years relevant experience in their discipline or in an operations environment within the oil &amp; gas industry.</p>

<p><h4>Belong, connect, grow, with KBR!</h4> <p>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</p> <p>KBR provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Location</h4> <p>Iraq - KBR office<br> 28/28 rotation</p> <h4>Job purpose</h4> <p>Define piping design bases, codes, standards, and deliverables to ensure safe, reliable, and cost-effective solutions.<br> Single point of contact for piping deliverables and activities related to piping materials.<br> Interface with client, vendor, and other stakeholders for successful execution of the project.<br> Coordinate with multi-disciplinary teams (process, mechanical, civil, electrical, instrumentation) and vendors to ensure integrated piping systems.<br> Mentor engineers, drive quality, and ensure schedule adherence for piping deliverables across project phases.</p> <h4>Key responsibilities</h4> <ul> <li>Develop and review piping design basis, piping material specifications, datasheets, and technical bid evaluations.</li> <li>Ensure compliance with applicable codes and standards and project-specific requirements.</li> <li>Develop standard deliverables, various datasheets, and requisition packages related to piping.</li> <li>Experience in non-metallic piping (GRE / HDPE) procurement and specifications.</li> <li>Provide in-depth technical support for material selection involving metallic and non-metallic piping systems.</li> <li>Participate in material selection and corrosion review sessions to ensure suitable materials for service conditions.</li> <li>Review and approve technical deliverables (isometrics, P&IDs, BOMs, MOC/Change Notes, design change requests, technical queries).</li> <li>Demonstrated knowledge of material tracking throughout the project cycle.</li> <li>Understand the MOC process and employ effective change management throughout the lifecycle of the project.</li> <li>Contribute to lessons learnt from the project.</li> <li>Report to department manager/lead engineer for the project.</li> </ul> <h4>Experience</h4> <ul> <li>12+ years of experience in concept, FEED and detail engineering and EPCM experience in the oil & gas industry.</li> <li>Experience with Middle East clients like ADNOC, BP, BOC, PDO, Total Energies & Qatar Energies is highly preferred.</li> <li>Familiarity with onshore and offshore facilities and carried out greenfield and brownfield projects.</li> <li>Experience working with multicultural project teams across various project execution centers.</li> <li>Familiarity with international piping codes and standards such as ASME B31.3, ASTM, API, and NACE MR0175/ISO 15156.</li> </ul> <h4>Qualifications</h4> <ul> <li>Master or bachelor of engineering in a related field.</li> <li>Professional membership or relevant certifications (e.g., PE/Chartered Engineer) are a plus.</li> <li>Certification related to piping design or stress analysis is advantageous.</li> </ul> <h4>Technical skills</h4> <ul> <li>Strong background in piping design, engineering, stress analysis, and support design.</li> <li>Proficiency with piping design software and calculation tools (e.g., CAESAR, AutoPIPE and 3D modeling tools).</li> <li>Technical experience to prepare manhours estimation for different types of piping activities and deliverables of different phases of the project like select phase, FEED and execution.</li> <li>Familiarity with codes, standards, regulations and practices applicable to the design and construction of various facilities.</li> <li>Hands-on knowledge of codes and standards relevant to piping.</li> <li>Experience with high-pressure piping, thermal insulation, coatings, and corrosion considerations.</li> <li>Diverse working experience in project management, conceptual, FEED and detailed design, and construction.</li> <li>Knowledge of interdisciplinary work processes, interfaces, and deliverables.</li> <li>Responsible for the training and development of engineers in his/her team.</li> <li>Adherence to company processes and procedures and handle internal and external project audits.</li> <li>Proven experience in vendor qualification, technical bid evaluation, and factory audits.</li> </ul> <h4>Soft skills</h4> <ul> <li><strong>Communication:</strong> Clear, concise communication with technical and non-technical stakeholders.</li> <li><strong>Problem solving:</strong> Proactive identification and mitigation of piping-related risks.</li> <li><strong>Project management:</strong> Planning, scheduling, risk management, and deliverable tracking.</li> <li><strong>Influence & collaboration:</strong> Effective collaboration with clients, vendors, and internal teams.</li> <li><strong>Adaptability:</strong> Comfort in dynamic project environments and changing technical requirements.</li> <li><strong>Attention to detail:</strong> Rigorous approach to reviews, calculations, and documentation.</li> <li><strong>Safety mindset:</strong> Commitment to health, safety, and environment (HSE) standards.</li> <li><strong>Critical thinking:</strong> Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems.</li> </ul></p><p></p>

<p>The Construction Manager is responsible for the complete administration and organization of construction and field personnel and directs the field effort through the activities of his staff. He reports directly to the Project Manager. Contributes to Construction Safety by reducing site exposure through modularization, standardization and maximizing off plot construction. Contributes in the development of brownfield construction strategies and planning initiatives for project opportunities pre FID. Focusses on addressing and removing hurdles to efficient construction and actively monitors productivity on site, advising (acting on behalf of) the construction manager of ways to improve the productivity metrics. Identifies and monitors brownfield construction planning initiatives for approved projects post FID. Will input into enhancing the design, contracting strategy and execution planning all in consideration of constructability through input into HSE, cost, schedule and quality. Acts as the Construction interface from the point of project inception to the point the project starts field execution. Ability to effectively work on more than one project at a time. Accountabilities/ Expectations : Coordinate with Project Engineer and EPCM Construction Management Team to bring a coordinated approach to the overall project scope, quality, cost and schedule expectations. Ensure that planning of the project deliverables from Engineering and Contracts &amp; Procurement is line with the construction sequence and further to the hand over sequence. Ensures designs make optimal use of cold work, modularization and off plots construction to minimize HSSE exposure on site.</p><p><strong>Desired Candidate Profile</strong></p><p>Skills are typically acquired through completion of an undergraduate degree in architecture, engineering, or business administration, preferred Engineering branches., i.e. Mechanical, Civil, electrical, chemical, or equivalent. 5 years of experience in project management which includes experience in facility construction or remodeling and management experience. Preferred Experience: Minimum 15 years experience in Oil and Gas related project Design and Engineering Minimum 10 years experience in Oil and Gas Project Delivery as a Umbrella Contract Construction Manager function in a discipline Workforce Experience in Productivity measurement resource based planning (Level 4 Scheduling) Strong Managerership and teambuilding skills Supervisory experience</p>

<p>The Well Engineer is responsible for well proposals and the Basis of Design. Provides Operation Plans and prepares Programs as well as assures technical integrity of Operations planning and execution. Responsible for the day-to-day surveillance of operations. Responsible for the creation of Approval for Expenditure (AFE) and performs cost control of operations. Participates in risk assessment, forecasts and plans medium and long term needs to meet program requirements, and anticipates operational changes and needs. Prepares equipment lists and identifies long lead items. Ensures proper communication within the project. Performs engineering studies to solve recurring problems. Prepares End-of-Well reports and contributes to knowledge management.</p><p>Additional Role Responsibilities: (1) Ability and flexibility to travel to Iraq both domestically and internationally typically 28/28 days per business required. (2) Bachelor's degree in Petroleum Engineering or a relevant Engineering specialization (3) Manages all aspects of rig operations including HS&amp;E, detail well planning, well construction, resourcing, cost reporting, performance management, materials and logistics, service company performance and management systems compliance (4) Manages the team, ensures activities are prioritized effectively and that the team delivers results in line with approved plans and timescales. (5) Develops a high level of responsibility and ownership within the team and promotes continuous improvement in the development of technical expertise and competency, standards and practices, commercial awareness and innovative thinking. (6) Demonstrated experience working on diverse, cross-functional teams. (7) Demonstrated Managership skills. (8) Demonstrated ability to manage stakeholders demands and issues on a Global scale. (9) Demonstrated ability to manage projects and deadlines. (10) Excellent communication skills (oral and written). (11) Strong acumen for technology development and innovation.</p><p>Requires a Bachelors degree in STEM, preference in Petroleum or Mechanical Engineering, and 4 or more years of well services / intervention experience. Supervisory experience and exposure to Multi-discipline operations is preferred. Must have Well Control Certificate.</p><p>Preferred Experience: Minimum of 10-years relevant experience in their discipline or in an operations environment within the oil &amp; gas industry.</p><p>Job Details Requisition Number: PHONE_NUMBER Experience Level: Experienced Hire Job Family: Engineering/Science/Technology Product Service Line: Halliburton Project Management Full Time / Part Time: Full Time Additional Locations for this position: Compensation Information Compensation is competitive and commensurate with experience.</p><p><strong>Desired Candidate Profile</strong></p><p>(2) Bachelor's degree in Petroleum Engineering or a relevant Engineering specialization (3) Manages all aspects of rig operations including HS&amp;E, detail well planning, well construction, resourcing, cost reporting, performance management, materials and logistics, service company performance and management systems compliance (4) Manages the team, ensures activities are prioritized effectively and that the team delivers results in line with approved plans and timescales. (5) Develops a high level of responsibility and ownership within the team and promotes continuous improvement in the development of technical expertise and competency, standards and practices, commercial awareness and innovative thinking. (6) Demonstrated experience working on diverse, cross-functional teams. (7) Demonstrated Managership skills. (8) Demonstrated ability to manage stakeholders demands and issues on a Global scale. (9) Demonstrated ability to manage projects and deadlines. (10) Excellent communication skills (oral and written). (11) Strong acumen for technology development and innovation.</p><p>Qualifications Requires a Bachelors degree in STEM, preference in Petroleum or Mechanical Engineering, and 4 or more years of well services / intervention experience. Supervisory experience and exposure to Multi-discipline operations is preferred. Must have Well Control Certificate.</p>

<p>Under general autonomy and wide scope: The Well Engineering Manager functions as a technical Subject Matter Expert (SME), typically at the Country level staying abreast of current industry and PSL technological developments. 2 This position is accountable for the implementation of Engineering processes with respect to quality and integrity assurance. Reviews and maintains HMS processes to ensure the management system remains up-to-date with industry best practices. Responsible for approval of Well Designs and/or Programs and ensures these are in compliance with contracts, as well as, the Company's HMS policies &amp; procedures. Ensures all Operational Activities are adequately evaluated and a full Risk Matrix table with Mitigation plans is completed. Responsible for resolving critical engineering/operational issues, identifying chronic problems and proposing solutions, ensuring optimum technical solutions for field project development, and compliance with all Project/Contract metrics. Coordinates engineering programs/procedures and practices among different Projects and/or Rigs. Supports development of new technology and champions the application and deployment of the same. Leads technical presentations to client. Provides work direction and mentorship on a regular basis to Engineers. Responsible for the training &amp; development of Well Engineers and their competency development. Operates with significant level of technical and/or operational independence in all assigned areas.</p><p>Additional Role Responsibilities: (1) Ability and flexibility to travel to Iraq both domestically and internationally typically 28/28 days per business required. (2) Provides Managership and guidance to both planning and operational teams. (3) Demonstrates support of the management system (4) Manages all well planning, design and engineering activities associated with drilling, completions and abandonment operations. (5) Ensures the team properly consider design options, assess risks and validate costs and work closely with other Wells/technical teams, legislative bodes and service providers at various stages of the well planning process to ensure viability of proposals. (6) Manages well operations to effectively control the risk, technical execution, cost control and ensures compliance with policies and procedures. (7) Manages operational deviations from Company policy with suitable adherence to the risk assessment process. (8) Manages platform rig engineering in the planning and execution of rig maintenance, rig modifications, recertification and upgrades. (9) Ensures peer reviews, risk assessments, engineering/planning reviews, etc. are undertaken. (10) Sets performance targets and implements performance measurement and improvement processes. (11) Ensures that the lessons learned system is utilized to record lessons and used to transfer lessons into detail well planning to complete the full learning cycle.</p><p><strong>Desired Candidate Profile</strong></p><p>Requires an undergraduate degree in STEM, preferably in Petroleum or Mechanical Engineering, and 12+ years experience as a Well Engineer with knowledge of drilling, completions, intervention operations and techniques. Demonstrated experience in leading or supervising an engineering team. Must have a Well Control certificate.</p><p>Preferred Experience: Minimum of 15-years relevant experience in their discipline or in an operations environment within the oil &amp; gas industry.</p>

<p>Under direct supervision: The Well Engineer is responsible for well proposals and the Basis of Design. Provides Operation Plans and prepares Programs as well as assures technical integrity of Operations planning and execution. Responsible for the day-to-day surveillance of operations. Responsible for the creation of Approval for Expenditure (AFE) and performs cost control of operations. Participates in risk assessment, forecasts and plans medium and long term needs to meet program requirements, and anticipates operational changes and needs. Prepares equipment lists and identifies long lead items. Ensures proper communication within the project. Performs engineering studies to solve recurring problems. Prepares End-of-Well reports and contributes to knowledge management.</p><p>Additional Role Responsibilities: (1) Ability and flexibility to travel to Iraq both domestically and internationally typically 28/28 days per business required. (2) Bachelor's degree in Petroleum Engineering or a relevant Engineering specialization (3) Manages all aspects of rig operations including HS&amp;E, detail well planning, well construction, resourcing, cost reporting, performance management, materials and logistics, service company performance and management systems compliance (4) Manages the team, ensures activities are prioritized effectively and that the team delivers results in line with approved plans and timescales. (5) Develops a high level of responsibility and ownership within the team and promotes continuous improvement in the development of technical expertise and competency, standards and practices, commercial awareness and innovative thinking. (6) Demonstrated experience working on diverse, cross-functional teams. (7) Demonstrated Managership skills. (8) Demonstrated ability to manage stakeholders demands and issues on a Global scale. (9) Demonstrated ability to manage projects and deadlines. (10) Excellent communication skills (oral and written). (11) Strong acumen for technology development and innovation.</p><p>Qualifications Requires a Bachelors degree in STEM, preference in Petroleum or Mechanical Engineering, and 4 or more years of well services / intervention experience. Supervisory experience and exposure to Multi-discipline operations is preferred. Must have Well Control Certificate. Preferred Experience: Minimum of 10-years relevant experience in their discipline or in an operations environment within the oil &amp; gas industry.</p><p><strong>Desired Candidate Profile</strong></p><p>We are looking for the right people - people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world's largest providers of products and services to the global energy industry.</p>

<p><h4>Job description</h4> <p>The lead mechanical & piping construction lead is responsible for directing, coordinating, and technically governing all field construction activities across mechanical and piping scopes within brownfield and greenfield project environments. The role provides senior level leadership, ensures disciplined execution, drives constructability integration, and supports strategic planning across multi-phase construction programs.</p> <p>This position acts as the primary technical lead for mechanical and piping construction, ensuring HSSE compliance, schedule adherence, cost efficiency, and quality compliance. The lead manages multi-discipline interfaces and ensures seamless integration between engineering, procurement, construction, and commissioning teams.</p> <h4>Accountabilities / expectations</h4> <ul> <li>Lead all mechanical and piping construction activities across multiple simultaneous work fronts, ensuring safe, efficient, and compliant execution.</li> <li>Provide technical direction, coaching, and performance oversight to construction teams and contractors.</li> <li>Manage daily/weekly construction planning, work-front readiness, and resource allocation.</li> <li>Ensure coordinated execution across civil, structural, electrical, instrumentation, and commissioning disciplines.</li> <li>Ensure mechanical and piping designs fully incorporate constructability principles, modularization, cold-work strategies, and HSSE risk reduction.</li> <li>Lead constructability reviews and provide authoritative input on installation methodologies, lifting studies, access planning, and brownfield tie-in strategies.</li> <li>Validate engineering deliverables for completeness, accuracy, and alignment with construction sequencing and systemization.</li> <li>Review and approve construction method statements, ITPs, JHAs, and technical procedures.</li> <li>Support development and implementation of construction execution plans, resource strategies, and work-front sequencing for all project phases.</li> <li>Ensure construction activities align with level 4 schedules, procurement milestones, fabrication readiness, and commissioning priorities.</li> <li>Identify productivity constraints, evaluate root causes, and implement corrective actions to improve field performance.</li> <li>Drive initiatives such as off-plot fabrication, pre-assembly, modular construction, and standardized installation practices.</li> <li>HSSE leadership by enforcing safe systems of work and ensuring compliance with KBR and client HSSE standards.</li> <li>Ensure mechanical and piping installations meet project specifications, industry codes (ASME, API, ISO), and quality requirements.</li> <li>Oversee inspection, testing, and commissioning readiness including hydrotesting, flushing, leak testing, and mechanical completion.</li> <li>Maintain strong communication with construction manager, engineering lead, procurement, QA/QC, and commissioning teams.</li> <li>Ensure timely resolution of technical queries, field design changes, and construction issues through structured interface management.</li> <li>Provide accurate reporting on progress, productivity, risks, and construction performance.</li> <li>Identify construction risks early, develop mitigation plans, and ensure proactive management of brownfield and greenfield constraints and SIMOPS.</li> <li>Promote continuous improvement through lessons learned, innovation in field execution, and adoption of best-practice methodologies.</li> </ul> <h4>Education</h4> <p>BSc. degree in mechanical engineering, piping engineering, or related discipline.</p> <h4>Experience requirements</h4> <p>10+ years experience in oil & gas mechanical/piping engineering and design.<br> 5-10 years experience leading construction activities in multidiscipline environments, including brownfield and live-plant conditions.</p> <p>Demonstrated experience in:</p> <ul> <li>Productivity measurement and resource-based planning</li> <li>Level 4 construction scheduling</li> <li>Mechanical completion, systemization, and commissioning interfaces</li> <li>Managing multiple contractors and simultaneous work fronts</li> </ul> <h4>Technical & leadership skills</h4> <ul> <li>Strong leadership and communication capabilities.</li> <li>Advanced understanding of constructability, modularization, and field execution methodologies.</li> <li>Proficiency in interpreting engineering drawings, isometrics, P&IDs, and 3D model reviews.</li> <li>Ability to lead complex brownfield and greenfield tie-ins, shutdown scopes, and SIMOPS environments.</li> <li>Strong problem solving skills with the ability to make technical decisions under pressure.</li> <li>High competency in HSSE risk management and safe construction practices.</li> </ul></p><p></p>

<p>Performs preventive/predictive maintenance and repair of a variety of mechanical equipment relative to their assigned location. Assists in supervising other technicians and prioritizes and/or assigns work when needed. Possesses advanced diagnostic/troubleshooting knowledge and skills. Performs advanced function testing to verify equipment readiness after maintenance. Must be proficient in understanding/interpreting mechanical schematics/drawings/prints. Ability to identify correct parts and locate them in a system search to enable accurate procurement of spares. Ensures adherence, accurate input, and maintenance of data into Halliburton's system of record. This role is responsible for following specific and detailed work processes within the Halliburton Management System (HMS) during daily job activities. Responsible for mentoring junior technicians. Responsible for ensuring duties are performed in a safe, efficient, and effective manner. Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations. Consequences of error are easily measured and can be confined.</p><p>Additional Role Responsibilities: (1). Provide the professional technical Support for static equipment and facilities operation and maintenance services; (2). Conducts detailed technical evaluations to address issues with equipment and system design, operation and maintenance; (3). Provides pertinent engineering expertise to Root Cause Failure Analysis; (4).Review and approval of mechanical data sheets of static equipment (5).Reviews affiliate, project and contractor deliverables as requested to ensure compliance with project specifications, Design Practices, Static Equipment Toolkit guidance, and best practices. Documents to be reviewed may include Piping &amp; Instrument Diagrams, equipment arrangements, equipment specifications, data sheets, vendor proposals, and technical studies; (6).Participates in design reviews, risk assessments, HAZOPs, vendor qualification, and vendor bid evaluations as requested; (7).Supports functional initiatives and maintains discipline documentation pertinent to Upstream Facilities; (8).Provides technical mentorship to less experienced engineers with emphasis on areas of identified skill gaps; (9).Proactively and continuously grows disciplines technical expertise in pertinent technologies. (10).Maintains current knowledge (e.g. through participation in industry conferences / forums).</p><p><strong>Desired Candidate Profile</strong></p><p>A high school diploma or equivalent and 5 years of experience in related mechanical fields are required. A technical school certification is preferred. Preferred Experience: Minimum of 10-years relevant experience in their discipline or in an operations environment within the oil &amp; gas industry.</p>

<p><h4>Job description</h4> <p><strong>Job title:</strong> Construction supervisor - mechanical & piping</p> <p><strong>Company:</strong> KBR</p> <p><strong>Location:</strong> Basra Iraq</p> <p><strong>Employment type:</strong> Full-time, contract</p> <p><strong>Rotation:</strong> 28/28</p> <p><strong>Required nationals:</strong> Local national</p> <h4>About company</h4> <p>Belong, connect, grow, with KBR! The KBR team delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</p> <p>KBR sustainable technology solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Roles and responsibilities</h4> <p>Specific responsibilities of the construction supervisor include:</p> <p><strong>Overall view of the role:</strong></p> <ul> <li>Contributes to construction safety by reducing site exposure through modularization, standardization, and maximizing off-plot construction.</li> <li>Contributes to developing brownfield/greenfield construction strategies and planning initiatives for project opportunities pre-FID.</li> <li>Focuses on addressing and removing hurdles to efficient construction and actively monitors productivity on site, advising (as per the instruction) from the construction lead and the construction manager on ways to improve the productivity metrics.</li> <li>Identifies and monitors brownfield/greenfield construction planning initiatives for approved projects post-FID.</li> <li>Coordinates with engineering, QA/QC, and HSE teams to ensure compliance.</li> <li>Works with the construction mechanical and piping lead and the construction manager to effectively execute construction deliverables for the project.</li> <li>Ability to effectively work on more than one project at a time and identify and resolve site issues efficiently.</li> <li>Experience in reading and understanding construction drawings (ISOs, GAD, and P&ID).</li> <li>Experience in reading and understanding LOSH, test packs, hydrotesting, flushing, and all pre-commissioning requirements.</li> <li>Coordinates with the contractor/subcontractor's day-to-day mechanical and piping construction activities at site, assembly, torquing, installation, reinstatement, and final completion of the subsystem, both brownfield and greenfield projects.</li> <li>Experience in rotating equipment construction activities including but not limited to the installation, managing the quality of the executed work, and alignment requirements till the mechanical completion stage.</li> <li>Wide experience in static mechanical construction activities, including but not limited to piping fabrication, good knowledge of preparing piping MTOs, weld maps, and sufficient experience for the piping quality requirements (NDT, PWHT, etc.).</li> <li>Strong experience in shutdown requirements, including but not limited to tie-ins and hook-up spools.</li> </ul> <h4>Accountabilities/expectations</h4> <ul> <li>Coordinate with all the team members, follow up daily with the construction lead he will be assigned to and the construction manager.</li> <li>Ensure that the project planning is deliverable from engineering and that contracts & procurement aligns with the construction and handover sequences.</li> <li>Ensure designs optimally use cold work, modularization, and off-plot construction to minimize on-site HSSE exposure.</li> <li>Ensure to follow the final/approved design during construction.</li> <li>Good knowledge of international standards (ASME, API, etc.).</li> <li>Strong understanding of safety/HSE regulations, procedures, and PTW system.</li> </ul> <h4>Education, skills & experience</h4> <p>BSc., university degree in mechanical engineering.</p> <p><strong>Experience and skillset:</strong></p> <ul> <li>Minimum 10-12 years’ construction experience in oil and gas-related projects with strong proof for piping and rotating roles.</li> <li>Strong leadership and teambuilding skills; supervisory experience.</li> <li>Experience in static and rotating equipment installation and alignment.</li> <li>Strong software skills including Microsoft Office, document websites, 3D module review, and preferably good knowledge of software design (AutoCAD).</li> <li>Strong level in English language to communicate properly with the team members and all stakeholders.</li> </ul></p><p></p>

<p><h4>Job description: HVAC mechanical supervisor – oil & gas / power projects</h4> <p><strong>Location:</strong> Majnoon Oil Field, Iraq (Rotation 28/28)<br> <strong>Nationality:</strong> Iraqi nationals preferred</p> <p><strong>Belong, connect, grow, with KBR!</strong><br> The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.<br> KBR sustainable technology solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Job scope</h4> <p>The HVAC mechanical supervisor is responsible for supervising day-to-day heating, ventilation, and air-conditioning activities across Majnoon Oil Field projects. The role ensures safe, reliable, and compliant operation of HVAC systems in accordance with KBR standards, client specifications, and Iraq oil & gas regulatory requirements. The supervisor oversees HVAC technicians, executes maintenance plans, and supports project works including upgrades, shutdowns, and new installations.</p> <h4>Accountability / expectations</h4> <ul> <li>Supervise HVAC technicians and ensure daily tasks are completed safely, efficiently, and in compliance with KBR HSSE requirements.</li> <li>Execute preventive, corrective, and predictive maintenance programs for chillers, package units, split units, ventilation systems, and industrial cooling equipment.</li> <li>Perform technical troubleshooting, root-cause analysis, and diagnostics on mechanical and electrical HVAC components.</li> <li>Ensure adherence to KBR HSSE policies, client standards, and relevant international codes.</li> <li>Review and support preparation of HVAC work permits, job hazard analyses, and method statements.</li> <li>Coordinate with operations, electrical, instrumentation, and projects teams to support field activities and shutdown schedules.</li> <li>Monitor contractor activities, ensuring quality workmanship and compliance with specifications.</li> <li>Maintain accurate documentation including maintenance logs, equipment history, spare-parts records, and inspection reports.</li> <li>Assist project engineering teams with HVAC design reviews, material requisitions, and technical evaluations.</li> <li>Track inventory levels and ensure availability of critical spares and consumables.</li> <li>Train, guide, and mentor HVAC technicians to support competency development and safe work practices.</li> <li>Participate in incident investigations and support implementation of corrective actions.</li> <li>Ensure HVAC systems operate effectively to support critical facilities such as control rooms, substations, accommodation units, and workshops.</li> </ul> <h4>Education</h4> <p>Bachelor’s degree or diploma in mechanical engineering or HVAC technology.</p> <h4>Experience</h4> <p>Minimum 8 years of HVAC experience in oil & gas, petrochemical, or heavy industrial environments.</p> <h4>Technical & professional requirements</h4> <ul> <li>Strong knowledge of HVAC mechanical systems, refrigeration cycles, ducting, ventilation, and industrial cooling.</li> <li>Experience supervising multi-disciplinary maintenance teams.</li> <li>Solid understanding of HSSE requirements in hazardous environments.</li> <li>Ability to interpret engineering drawings, P&IDs, and technical specifications.</li> <li>Effective communication, leadership, and team-coordination skills.</li> </ul></p><p></p>

<p><h4>Belong, connect, grow with KBR!</h4> <p>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</p> <p>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Job description: HVAC mechanical lead – oil & gas / power projects</h4> <p><strong>Company:</strong> KBR Iraq<br> <strong>Location:</strong> Majnoon Oil Field, Iraq (Rotation Alignment 28/28)<br> <strong>Nationality:</strong> Iraqi nationals preferred</p> <p>The HVAC Mechanical Lead is responsible for overseeing all heating, ventilation, and air-conditioning systems across Majnoon Oil Field Projects. This role ensures safe, reliable, and compliant operation of HVAC assets in line with KBR standards, client specifications, and Iraq oil & gas regulatory requirements. The position leads a team of HVAC technicians, coordinates maintenance activities, and supports project execution for upgrades, shutdowns, and new installations.</p> <h4>Accountability / expectations</h4> <ul> <li>Lead and supervise HVAC teams, ensuring daily tasks are executed safely and efficiently.</li> <li>Manage preventive, corrective, and predictive maintenance programs for all HVAC systems, including chillers, package units, split units, ventilation systems, and industrial cooling equipment.</li> <li>Conduct technical troubleshooting, root-cause analysis, and performance diagnostics on mechanical and electrical HVAC components.</li> <li>Ensure compliance with KBR HSSE policies, client standards, and international codes.</li> <li>Review and approve HVAC work permits, job hazard analyses, and method statements.</li> <li>Coordinate with Operations, Electrical, Instrumentation, and Projects teams to support field activities and shutdown planning.</li> <li>Oversee contractor performance, ensuring quality workmanship and adherence to specifications.</li> <li>Maintain accurate documentation: maintenance logs, equipment history, spare-parts records, and inspection reports.</li> <li>Support project engineering teams with HVAC design reviews, material requisitions, and technical evaluations.</li> <li>Monitor inventory levels and ensure availability of critical spares and consumables.</li> <li>Train and mentor HVAC technicians, promoting competency development and safe work practices.</li> <li>Participate in incident investigations and implement corrective actions to prevent recurrence.</li> <li>Ensure HVAC systems operate efficiently to support critical facilities such as control rooms, substations, accommodation units, and workshops.</li> </ul> <h4>Education</h4> <p>Bachelor’s degree or diploma in mechanical engineering or HVAC technology.</p> <h4>Experience</h4> <ul> <li>10+ years of HVAC experience in oil & gas, petrochemical, or heavy industrial environments.</li> <li>Strong knowledge of HVAC mechanical systems, refrigeration cycles, ducting, ventilation, and industrial cooling.</li> <li>Experience supervising multi-disciplinary maintenance teams.</li> <li>Proven understanding of HSSE requirements in hazardous environments.</li> <li>Ability to interpret engineering drawings, P&IDs, and technical specifications.</li> <li>Strong communication and leadership skills.</li> </ul></p><p></p>

<p><h4>Job description - Construction M&P supervisor</h4> <p>The mechanical & piping construction supervisor is responsible for supervising field construction activities across mechanical and piping scopes within brownfield/greenfield project environments. The role ensures safe execution, constructability alignment, productivity improvement, and coordinated delivery of construction work fronts. The supervisor works closely with multi-discipline teams to meet project objectives for HSSE, cost, schedule, and quality.</p> <h4>Accountability / expectations:</h4> <ul> <li>Supervise mechanical and piping construction activities in accordance with project specifications, HSSE requirements, and construction standards.</li> <li>Support construction safety by promoting modularization, standardization, and maximizing off-plot fabrication to reduce site exposure.</li> <li>Monitor construction productivity, identify constraints, and escalate improvement opportunities to the construction manager.</li> <li>Assist in developing and implementing brownfield/greenfield construction strategies and execution plans for project phases.</li> <li>Ensure construction work fronts are aligned with engineering deliverables, procurement schedules, and handover sequences.</li> <li>Coordinate with lead to support construction strategies, schedules, and resource planning.</li> <li>Ensure mechanical and piping designs incorporate constructability principles, cold-work opportunities, modularization, and HSSE risk reduction.</li> <li>Participate in constructability reviews and support assessment of construction risks and mitigation measures.</li> <li>Coordinate multi-discipline interfaces to ensure smooth execution across mechanical, piping, civil, electrical, and instrumentation scopes.</li> <li>Provide technical guidance to field crews and contractors for mechanical and piping installation activities.</li> <li>Ensure compliance with project specifications, industry standards, and quality requirements.</li> <li>Oversee installation, testing, and commissioning readiness of mechanical and piping systems.</li> <li>Maintain accurate reporting of progress, productivity, and construction issues to the lead & construction manager.</li> <li>Capable of supervising multiple work scopes concurrently when required.</li> <li>Deliver construction activities safely, efficiently, and in alignment with project schedule and cost targets.</li> <li>Ensure engineering and procurement deliverables support construction sequencing and work-front availability.</li> <li>Support continuous improvement in construction execution through proactive identification of risks and opportunities.</li> <li>Maintain strong communication and coordination across all disciplines.</li> </ul> <h4>Education</h4> <p>BSc. degree in mechanical engineering, piping engineering, or related discipline.</p> <h4>Experience</h4> <ul> <li>5–8 years experience in oil & gas project design and engineering (mechanical/piping discipline).</li> <li>3–5 years experience supervising construction activities within a multidiscipline workforce.</li> <li>Experience in productivity measurement, resource-based planning, and level 4 scheduling.</li> <li>Strong understanding of brownfield/greenfield construction environments and associated HSSE requirements.</li> </ul> <h4>Skills</h4> <ul> <li>Strong supervisory, communication, and coordination skills.</li> <li>Ability to manage multiple work fronts simultaneously.</li> <li>Solid understanding of constructability, modularization, and field execution methodologies.</li> </ul></p><p></p>

<p><h4>About company</h4> <p>Belong, connect, grow, with KBR! The KBR team delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</p> <p>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Job purpose</h4> <p>The Construction Supervisor is responsible for overseeing and managing all on-site construction activities, ensuring that projects are executed safely, on schedule, within budget, and in compliance with project specifications, quality standards, and HSE regulations. The role involves supervising construction teams, subcontractors, and day-to-day site operations with a primary focus on flowlines, mechanical works, and piping systems in the oil and gas sector.</p> <h4>HSE activities</h4> <ul> <li>Support and enforce project guidelines and HSE objectives.</li> <li>Attend HSE meetings and training when necessary.</li> <li>Participate in job safety analysis, make suggestions, stop dangerous situations, and report anomalies and dangerous acts.</li> </ul> <h4>Key job responsibilities</h4> <ul> <li>Supervise and coordinate all on-site construction activities related to flowlines, mechanical installations, material and piping systems.</li> <li>Ensure work is carried out in strict compliance with project specifications, engineering drawings, and applicable codes/standards.</li> <li>Monitor daily work progress and report to the Construction Manager on project status, delays, and resource requirements.</li> <li>Manage and supervise construction crews, subcontractors, and vendors to ensure efficient and quality workmanship.</li> <li>Review and interpret P&IDs, isometric drawings, piping layouts, and mechanical installation drawings.</li> <li>Coordinate with engineering, procurement, and quality control teams to resolve technical issues and ensure material availability.</li> <li>Conduct quality inspections on welding, piping fabrication, pressure testing, and mechanical installations.</li> <li>Ensure proper documentation and reporting of site activities, including daily reports, inspection records, and progress photos.</li> <li>Identify potential risks and implement corrective actions to prevent project delays or safety incidents.</li> <li>Participate in site walk-downs, pre-commissioning, and commissioning activities as required.</li> <li>Maintain effective communication with clients, contractors, and project stakeholders.</li> </ul> <h4>Experience</h4> <p>Bachelor’s degree in engineering or construction field. Minimum 5 years of experience in the oil industry and a deep understanding of regulations. Experienced pipeline construction supervisor in onshore greenfield and brownfield projects with a very good knowledge of rules, procedures and international codes and standards. Team player with ability to work collaboratively across complex project teams and interface between interdisciplinary departments and within an international team.</p> <p>Proficiency in pipeline systems and software.</p> <h4>Technical skills</h4> <ul> <li>In-depth knowledge of piping systems, flowlines, and mechanical installations.</li> <li>Proficiency in reading and interpreting P&IDs, isometric drawings, piping layouts, and structural drawings.</li> <li>Strong understanding of welding procedures, NDT (Non-Destructive Testing), and piping codes (ASME, API, ANSI).</li> <li>Familiarity with pressure testing, hydrotesting, and pre-commissioning activities.</li> <li>Working knowledge of project management and construction planning tools (MS Project, Primavera – preferred).</li> <li>Competence in quality control and inspection processes.</li> <li>Understanding of HSE management systems and risk assessment methodologies.</li> <li>Proficient in Microsoft Office Suite (Word, Excel, Outlook, PowerPoint).</li> </ul> <h4>Soft skills</h4> <ul> <li>Strong leadership and team management abilities.</li> <li>Excellent communication and interpersonal skills for coordination with multicultural teams.</li> <li>Strong problem-solving and decision-making capabilities.</li> <li>High level of attention to detail and organizational skills.</li> <li>Ability to work under pressure and meet tight deadlines.</li> <li>Collaborative mindset with the ability to work across departments.</li> <li>Adaptability to changing site conditions and project requirements.</li> <li>Fluency in Arabic and English (verbal and written).</li> </ul></p><p></p>

<p><h4>About company</h4> <p>Belong, connect, grow, with KBR! The KBR team delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</p> <p>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Job purpose</h4> <p>The Construction Supervisor is responsible for overseeing and managing all on-site construction activities, ensuring that projects are executed safely, on schedule, within budget, and in compliance with project specifications, quality standards, and HSE regulations. The role involves supervising construction teams, subcontractors, and day-to-day site operations with a primary focus on flowlines, mechanical works, and piping systems in the oil and gas sector.</p> <h4>HSE activities</h4> <ul> <li>Support and enforce project guidelines and HSE objectives.</li> <li>Attend HSE meetings and training when necessary.</li> <li>Participate in job safety analysis, make suggestions, stop dangerous situations, and report anomalies and dangerous acts.</li> </ul> <h4>Key job responsibilities</h4> <ul> <li>Supervise and coordinate all on-site construction activities related to flowlines, mechanical installations, material and piping systems.</li> <li>Ensure work is carried out in strict compliance with project specifications, engineering drawings, and applicable codes/standards.</li> <li>Monitor daily work progress and report to the Construction Manager on project status, delays, and resource requirements.</li> <li>Manage and supervise construction crews, subcontractors, and vendors to ensure efficient and quality workmanship.</li> <li>Review and interpret P&IDs, isometric drawings, piping layouts, and mechanical installation drawings.</li> <li>Coordinate with engineering, procurement, and quality control teams to resolve technical issues and ensure material availability.</li> <li>Conduct quality inspections on welding, piping fabrication, pressure testing, and mechanical installations.</li> <li>Ensure proper documentation and reporting of site activities, including daily reports, inspection records, and progress photos.</li> <li>Identify potential risks and implement corrective actions to prevent project delays or safety incidents.</li> <li>Participate in site walk-downs, pre-commissioning, and commissioning activities as required.</li> <li>Maintain effective communication with clients, contractors, and project stakeholders.</li> </ul> <h4>Experience</h4> <p>Bachelor’s degree in engineering or construction field. Minimum 5 years of experience in the oil industry and a deep understanding of regulations. Experienced pipeline construction supervisor in onshore greenfield and brownfield projects with a very good knowledge of rules, procedures and international codes and standards. Team player with ability to work collaboratively across complex project teams and interface between interdisciplinary departments and within an international team.</p> <p>Proficiency in pipeline systems and software.</p> <h4>Technical skills</h4> <ul> <li>In-depth knowledge of piping systems, flowlines, and mechanical installations.</li> <li>Proficiency in reading and interpreting P&IDs, isometric drawings, piping layouts, and structural drawings.</li> <li>Strong understanding of welding procedures, NDT (Non-Destructive Testing), and piping codes (ASME, API, ANSI).</li> <li>Familiarity with pressure testing, hydrotesting, and pre-commissioning activities.</li> <li>Working knowledge of project management and construction planning tools (MS Project, Primavera – preferred).</li> <li>Competence in quality control and inspection processes.</li> <li>Understanding of HSE management systems and risk assessment methodologies.</li> <li>Proficient in Microsoft Office Suite (Word, Excel, Outlook, PowerPoint).</li> </ul> <h4>Soft skills</h4> <ul> <li>Strong leadership and team management abilities.</li> <li>Excellent communication and interpersonal skills for coordination with multicultural teams.</li> <li>Strong problem-solving and decision-making capabilities.</li> <li>High level of attention to detail and organizational skills.</li> <li>Ability to work under pressure and meet tight deadlines.</li> <li>Collaborative mindset with the ability to work across departments.</li> <li>Adaptability to changing site conditions and project requirements.</li> <li>Fluency in Arabic and English (verbal and written).</li> </ul></p><p></p>