وظائف مدير مدرسة - اربيل العراق

<p><h4>Purpose and scope:</h4> <p>The site manager has overall responsibility for cost, schedule and technical performance of the operation. Accountable for production, supply, production control/planning and quality management aspects of operation. Acts as primary point of contact for customers at the work site level.</p> <h4>Essential responsibilities:</h4> <li>Provides direction and leadership to all site assigned personnel.</li> <li>Prepares and submits site labor/non-labor budgets, forecast estimated costs and control subcontractors.</li> <li>Controls service contracts in support of site operations.</li> <li>Manages all department managers/staff assigned to site operations.</li> <li>Manages and coordinates research and investigations into business problems.</li> <li>Provides guidance and assistance relative to operating problems and projects.</li> <li>Performs all other position related duties as assigned or requested.</li> <h4>Minimum position knowledge, skills, and abilities required:</h4> <li>Bachelor's degree or equivalent combination of academic, technical or military training and experience.</li> <li>Proven experience working with foreign labor workforce.</li> <li>Possess 5 or more years of diverse management experience including experience in vehicle maintenance, facilities maintenance or logistics management.</li> <li>Possess excellent communication, analytical, project management and supervisory skills.</li> <li>Desktop computer skills are essential with proficiency in full range of Microsoft Office products and should be capable of preparing management level reports and presentations.</li> <li>Position may require occasional travel.</li> <li>Possess a valid state issued driver’s license.</li> <h4>Work environment, physical demands, and mental demands:</h4> <p>Typical office environment with no unusual hazards, occasional lifting to 20 pounds, constant sitting while using the computer terminal, constant use of sight abilities while reviewing documents, constant use of speech/hearing abilities for communication and constant mental alertness. Must possess planning/organizing skills and must be able to work under deadlines. Position requires routine travel to site operating locations.</p> <h4>Other responsibilities:</h4> <li><strong>Safety</strong> - The company enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid/buddy aid responsibilities, participating in emergency response tasks and serving on safety committees and teams.</li> <li><strong>Quality</strong> - Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the company quality policy and carry out job activities in compliance with applicable quality system documents and customer contracts. Each employee must read and understand his/her quality management and customer satisfaction responsibilities.</li> <li><strong>Procedure compliance</strong> - Each employee must read, understand and implement the general and specific operational, safety, quality and environmental requirements of all plans, procedures and policies pertaining to his/her job.</li></p><p></p>

<p><h4>Purpose and scope:</h4> <p>The site manager has overall responsibility for cost, schedule and technical performance of the operation. Accountable for production, supply, production control/planning and quality management aspects of operation. Acts as primary point of contact for customers at the work site level.</p> <h4>Essential responsibilities:</h4> <ul> <li>Provides direction and leadership to all site assigned personnel.</li> <li>Prepares and submits site labor/non-labor budgets, forecast estimated costs and control subcontractors.</li> <li>Controls service contracts in support of site operations.</li> <li>Manages all department managers/staff assigned to site operations.</li> <li>Manages and coordinates research and investigations into business problems.</li> <li>Provides guidance and assistance relative to operating problems and projects.</li> <li>Performs all other position related duties as assigned or requested.</li> </ul> <h4>Minimum position knowledge, skills, and abilities required:</h4> <ul> <li>Bachelor's degree or equivalent combination of academic, technical or military training and experience.</li> <li>Proven experience working with foreign labor workforce.</li> <li>Possess 5 or more years of diverse management experience including experience in vehicle maintenance, facilities maintenance or logistics management.</li> <li>Possess excellent communication, analytical, project management and supervisory skills.</li> <li>Desktop computer skills are essential with proficiency in full range of Microsoft Office products and should be capable of preparing management level reports and presentations.</li> <li>Position may require occasional travel.</li> <li>Possess a valid state issued driver’s license.</li> </ul> <h4>Work environment, physical demands, and mental demands:</h4> <p>Typical office environment with no unusual hazards, occasional lifting to 20 pounds, constant sitting while using the computer terminal, constant use of sight abilities while reviewing documents, constant use of speech/hearing abilities for communication and constant mental alertness. Must possess planning/organizing skills and must be able to work under deadlines. Position requires routine travel to site operating locations.</p> <h4>Other responsibilities:</h4> <p><strong>Safety</strong> - Amentum enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid/buddy aid responsibilities, participating in emergency response tasks and serving on safety committees and teams.</p> <p><strong>Quality</strong> - Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the Amentum Quality Policy and carry out job activities in compliance with applicable Amentum Quality System documents and customer contracts. Each employee must read and understand his/her Quality Management and Customer Satisfaction responsibilities.</p> <p><strong>Procedure compliance</strong> - Each employee must read, understand and implement the general and specific operational, safety, quality and environmental requirements of all plans, procedures and policies pertaining to his/her job.</p></p><p></p>

<p><h4>Purpose and scope:</h4> <p>The site manager has overall responsibility for cost, schedule and technical performance of the operation. Accountable for production, supply, production control/planning and quality management aspects of operation. Acts as primary point of contact for customers at the work site level.</p> <h4>Essential responsibilities:</h4> <li>Provides direction and leadership to all site assigned personnel.</li> <li>Prepares and submits site labor/non-labor budgets, forecast estimated costs and control subcontractors.</li> <li>Controls service contracts in support of site operations.</li> <li>Manages all department managers/staff assigned to site operations.</li> <li>Manages and coordinates research and investigations into business problems.</li> <li>Provides guidance and assistance relative to operating problems and projects.</li> <li>Performs all other position related duties as assigned or requested.</li> <h4>Minimum position knowledge, skills, and abilities required:</h4> <li>Bachelor's degree or equivalent combination of academic, technical or military training and experience.</li> <li>Proven experience working with foreign labor workforce.</li> <li>Possess 5 or more years of diverse management experience including experience in vehicle maintenance, facilities maintenance or logistics management.</li> <li>Possess excellent communication, analytical, project management and supervisory skills.</li> <li>Desktop computer skills are essential with proficiency in full range of Microsoft Office products and should be capable of preparing management level reports and presentations.</li> <li>Position may require occasional travel.</li> <li>Possess a valid state issued driver’s license.</li> <h4>Work environment, physical demands, and mental demands:</h4> <p>Typical office environment with no unusual hazards, occasional lifting to 20 pounds, constant sitting while using the computer terminal, constant use of sight abilities while reviewing documents, constant use of speech/hearing abilities for communication and constant mental alertness. Must possess planning/organizing skills and must be able to work under deadlines. Position requires routine travel to site operating locations.</p> <h4>Other responsibilities:</h4> <li><strong>Safety</strong> - The company enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid/buddy aid responsibilities, participating in emergency response tasks and serving on safety committees and teams.</li> <li><strong>Quality</strong> - Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the company quality policy and carry out job activities in compliance with applicable quality system documents and customer contracts. Each employee must read and understand his/her quality management and customer satisfaction responsibilities.</li> <li><strong>Procedure compliance</strong> - Each employee must read, understand and implement the general and specific operational, safety, quality and environmental requirements of all plans, procedures and policies pertaining to his/her job.</li></p><p></p>

<p><h4>Purpose and scope:</h4> <p>The site manager has overall responsibility for cost, schedule and technical performance of the operation. Accountable for production, supply, production control/planning and quality management aspects of operation. Acts as primary point of contact for customers at the work site level.</p> <h4>Essential responsibilities:</h4> <ul> <li>Provides direction and leadership to all site assigned personnel.</li> <li>Prepares and submits site labor/non-labor budgets, forecast estimated costs and control subcontractors.</li> <li>Controls service contracts in support of site operations.</li> <li>Manages all department managers/staff assigned to site operations.</li> <li>Manages and coordinates research and investigations into business problems.</li> <li>Provides guidance and assistance relative to operating problems and projects.</li> <li>Performs all other position related duties as assigned or requested.</li> </ul> <h4>Minimum position knowledge, skills, and abilities required:</h4> <ul> <li>Bachelor's degree or equivalent combination of academic, technical or military training and experience.</li> <li>Proven experience working with foreign labor workforce.</li> <li>Possess 5 or more years of diverse management experience including experience in vehicle maintenance, facilities maintenance or logistics management.</li> <li>Possess excellent communication, analytical, project management and supervisory skills.</li> <li>Desktop computer skills are essential with proficiency in full range of Microsoft Office products and should be capable of preparing management level reports and presentations.</li> <li>Position may require occasional travel.</li> <li>Possess a valid state issued driver’s license.</li> </ul> <h4>Work environment, physical demands, and mental demands:</h4> <p>Typical office environment with no unusual hazards, occasional lifting to 20 pounds, constant sitting while using the computer terminal, constant use of sight abilities while reviewing documents, constant use of speech/hearing abilities for communication and constant mental alertness. Must possess planning/organizing skills and must be able to work under deadlines. Position requires routine travel to site operating locations.</p> <h4>Other responsibilities:</h4> <p><strong>Safety</strong> - Amentum enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid/buddy aid responsibilities, participating in emergency response tasks and serving on safety committees and teams.</p> <p><strong>Quality</strong> - Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the Amentum Quality Policy and carry out job activities in compliance with applicable Amentum Quality System documents and customer contracts. Each employee must read and understand his/her Quality Management and Customer Satisfaction responsibilities.</p> <p><strong>Procedure compliance</strong> - Each employee must read, understand and implement the general and specific operational, safety, quality and environmental requirements of all plans, procedures and policies pertaining to his/her job.</p></p><p></p>

<p><strong>Job Responsibilities:</strong>&nbsp;</p><p>&nbsp;</p><p><strong>1.Channel Development &amp; Customer Management</strong> &nbsp;&nbsp;</p><p>Develop new dealers and partners; maintain existing channel customers; negotiate policies, orders, pricing, and supply; resolve channel conflicts, unauthorized cross-regional selling, and pricing disorder.</p><p><strong>&nbsp;2.</strong> <strong>Market Promotion Execution</strong></p><p>Implement company promotional policies, rebates, and regional marketing campaigns; collect competitive intelligence on pricing, activities, and dynamics; report market information upward and propose countermeasures.</p><p><strong>3. Store Operations Management</strong> &nbsp;&nbsp;</p><p>Manage store standardization: display setup, stock allocation, inventory control, promotor scheduling, and retail standards; monitor out-of-stock and slow-moving products to drive high inventory turnover. &nbsp;&nbsp;</p><p><strong>4. Reporting &amp; Communication</strong> &nbsp;&nbsp;</p><p>Regularly submit regional sales reports, customer analysis, and weekly/monthly market reports; plan action plans for the following month. &nbsp;&nbsp;</p><p><strong>5.Order &amp; Receivables Control</strong></p><p>&nbsp;Track customer orders and coordinate shipments; focus on managing accounts receivable to reduce overdue and bad debt risks. &nbsp;&nbsp;</p><p><strong>6-Key Account / Government &amp; Enterprise Client Management</strong></p><p>&nbsp;Conduct regular visits to core key accounts within the region; deepen partnerships and identify incremental order opportunities. &nbsp;&nbsp;</p><p><strong>7-Team Management</strong> &nbsp;&nbsp;</p><p>Manage regional sales representatives, promoters, and other team members to improve work efficiency. &nbsp;&nbsp;</p><p>&nbsp;</p><p><strong>Requirements:</strong></p><ol><li>Educational background: Bachelor degree or above, marketing, business administration, electrical engineering and other related majors are preferred.</li><li>Work experience: more than 5 years of sales experience in the home appliance industry, more than 2 years of regional management or team management experience, familiar with home appliance products and channel operation models.</li><li>Channel resources: those with dealers, stores or e-commerce channel resources are preferred.</li><li>Data analysis: proficient in using office software and can drive decisions through data.</li><li>Negotiation and communication: good at customer negotiations and able to coordinate the interests of multiple parties.</li><li>Stress resistance: adapt to high-frequency business trips (covering cities in the region) and cope with performance pressure.</li></ol><p>&nbsp;</p>

<p><h4>Location</h4> <p>Erbil, Iraq</p> <h4>Job summary</h4> <p>The heavy wheel motor vehicle field service representative (FSR) provides on-site technical support and advice to assigned customers.</p> <h4>Principal accountabilities</h4> <p>(Typical duties include the following, although specific duties vary by assignment or contract)</p> <ul> <li>Provide technical guidance and advice to the customer.</li> <li>Present a positive image of self and company’s services.</li> <li>Work effectively with differing customers and cultures.</li> <li>Maintain a safe work environment and ensure compliance with safety objectives and policies.</li> <li>Provide inspection support and perform repairs, sustainment maintenance, retrofits, and modifications to multiple platform vehicles.</li> <li>Conduct technical analysis of vehicle implementations, modifications and enhancements.</li> <li>Troubleshoot technical problems and issues and determine technical solutions.</li> <li>Act as local on-site representative to customer's organization.</li> <li>Document and submit company expense reports and time cards.</li> <li>Perform other qualified duties as assigned.</li> </ul> <h4>Reporting relationships</h4> <ul> <li>Title of direct report(s): None</li> <li>Title of supervisor: Program manager, or other supervisor title may vary by assignment</li> </ul> <h4>Knowledge & skills</h4> <ul> <li>Must have knowledge of database software, spreadsheet software, presentation software, and word processing software.</li> <li>Knowledgeable of U.S. military vehicle maintenance management publications and guidelines.</li> <li>Ability to interpret and use all types of engineering drawings, schematics, diagrams, and specification sheets.</li> <li>Ability to use all types of power tools, lifting devices, carrying or support equipment, including safe use of slings and chains.</li> <li>Familiar with the use and operation of TMDE (test, measurement and diagnostic equipment).</li> <li>Must be able to function with minimal supervision.</li> <li>Ability to obtain and maintain a US passport.</li> <li>Ability to obtain a secret security clearance.</li> </ul> <h4>Experience & education</h4> <ul> <li>High school diploma or GED required. Bachelor’s degree preferred.</li> <li>Class A or B CDL preferred.</li> <li>Four (4) years certified vehicle maintenance required.</li> <li>ASE level certification in vehicular and component level fault diagnostics and maintenance or military equivalent.</li> <li>Prior instructional experience delivering technical training in fault diagnostics and maintenance/repair.</li> </ul> <h4>Physical requirements / working environment</h4> <ul> <li>Must be willing and able to work in extreme temperatures.</li> <li>Capability to lift 55 lbs without assistance.</li> <li>Must be able to meet medical and physical fitness requirements to enter into and maintain deployment in accordance with customer requirements.</li> <li>Live and work in an austere environment in an active combat zone most likely under U.S. government control.</li> </ul> <h4>Travel</h4> <ul> <li>Able to travel domestically and internationally.</li> <li>Relocate to different locations within the AOR on short notice to support assignment.</li> </ul></p><p></p>

<p><h4>Location</h4> <p>Erbil, Iraq</p> <h4>Job summary</h4> <p>The heavy wheel motor vehicle field service representative (FSR) provides on-site technical support and advice to assigned customers.</p> <h4>Principal accountabilities</h4> <p>(Typical duties include the following, although specific duties vary by assignment or contract)</p> <ul> <li>Provide technical guidance and advice to the customer.</li> <li>Present a positive image of self and company’s services.</li> <li>Work effectively with differing customers and cultures.</li> <li>Maintain a safe work environment and ensure compliance with safety objectives and policies.</li> <li>Provide inspection support and perform repairs, sustainment maintenance, retrofits, and modifications to multiple platform vehicles.</li> <li>Conduct technical analysis of vehicle implementations, modifications and enhancements.</li> <li>Troubleshoot technical problems and issues and determine technical solutions.</li> <li>Act as local on-site representative to customer's organization.</li> <li>Document and submit company expense reports and time cards.</li> <li>Perform other qualified duties as assigned.</li> </ul> <h4>Reporting relationships</h4> <p>Title of direct report(s): None<br> Title of supervisor: Program manager, or other supervisor title may vary by assignment</p> <h4>Knowledge & skills</h4> <ul> <li>Must have knowledge of database software, spreadsheet software, presentation software, and word processing software.</li> <li>Knowledgeable of U.S. military vehicle maintenance management publications and guidelines.</li> <li>Ability to interpret and use all types of engineering drawings, schematics, diagrams, and specification sheets.</li> <li>Ability to use all types of power tools, lifting devices, carrying or support equipment, including safe use of slings and chains.</li> <li>Familiar with the use and operation of TMDE (Test, Measurement and Diagnostic Equipment).</li> <li>Must be able to function with minimal supervision.</li> <li>Ability to obtain and maintain a US passport.</li> <li>Ability to obtain a secret security clearance.</li> </ul> <h4>Experience & education</h4> <ul> <li>High school diploma or GED required. Bachelor’s degree preferred.</li> <li>Class A or B CDL preferred.</li> <li>Four (4) years certified vehicle maintenance required.</li> <li>ASE level certification in vehicular and component level fault diagnostics and maintenance or military equivalent.</li> <li>Prior instructional experience delivering technical training in fault diagnostics and maintenance/repair.</li> </ul> <h4>Physical requirements / working environment</h4> <ul> <li>Must be willing and able to work in extreme temperatures.</li> <li>Capability to lift 55 lbs without assistance.</li> <li>Must be able to meet medical and physical fitness requirements to enter into and maintain deployment in accordance with customer requirements.</li> <li>Live and work in an austere environment in an active combat zone most likely under U.S. government control.</li> </ul> <h4>Travel</h4> <ul> <li>Able to travel domestically and internationally.</li> <li>Relocate to different locations within the area of responsibility on short notice to support assignment.</li> </ul></p><p></p>

<p><h4>Location</h4> <p>Erbil, Iraq</p> <h4>Job summary</h4> <p>The material handling equipment field service rep (FSR) provides on-site technical support and advice to assigned customers.</p> <h4>Principal accountabilities</h4> <p>(Typical duties include the following, although specific duties vary by assignment or contract)</p> <ul> <li>Provide technical guidance and advice to the customer.</li> <li>Present a positive image of self and company’s services.</li> <li>Work effectively with differing customers and cultures.</li> <li>Maintain a safe work environment and ensure compliance with safety objectives and policies.</li> <li>Provide inspection support and perform repairs, sustainment maintenance, retrofits, and modifications to multiple platform vehicles.</li> <li>Conduct technical analysis of vehicle implementations, modifications, and enhancements.</li> <li>Troubleshoot technical problems and issues and determine technical solutions.</li> <li>Act as local on-site representative to customer's organization.</li> <li>Document and submit company expense reports and timecards.</li> <li>Perform other qualified duties as assigned.</li> </ul> <h4>Knowledge & skills</h4> <ul> <li>Must have direct knowledge of material handling equipment (MHE) such as cranes, forklifts and loaders.</li> <li>Must be able to inspect, test and repair the mentioned MHE.</li> <li>Knowledgeable of U.S. military vehicle maintenance management processes, publications, and guidelines.</li> <li>Ability to use all types of engineering drawings, schematics, diagrams, and technical specification sheets.</li> <li>Ability to use all types of power tools, lifting devices, or support equipment including chains.</li> <li>Familiar with the use and operation of TMDE (test, measurement and diagnostic equipment).</li> <li>Must be able to function with minimal supervision.</li> <li>Ability to obtain and maintain a US passport.</li> </ul> <h4>Experience & education</h4> <ul> <li>High school diploma or GED required.</li> <li>Class A or B CDL preferred.</li> <li>Four (4) years certified vehicle maintenance required.</li> <li>ASE level certification in vehicular and component level fault diagnostics and maintenance or military equivalent.</li> <li>Prior instructional experience delivering technical training in fault diagnostics and maintenance/repair.</li> </ul> <h4>Physical requirements/working environment</h4> <ul> <li>Must be willing and able to work in extreme temperatures.</li> <li>Capability to lift 55lbs without assistance.</li> <li>Must be able to meet medical and physical fitness requirements to enter and maintain deployment in accordance with customer requirements.</li> <li>Live and work in an austere environment in an active combat zone most likely under U.S. government control.</li> </ul> <h4>Travel</h4> <ul> <li>Able to travel domestically and internationally.</li> <li>Relocate to different locations within the AOR on short notice to support assignment.</li> </ul> <h4>Disclaimer</h4> <p>The above information on this description has been designed to indicate the general nature and level of work performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of employees assigned to this job.</p></p><p></p>

<p><h4>Location</h4> <p>Erbil, Iraq</p> <h4>Job summary</h4> <p>The material handling equipment field service rep (FSR) provides on-site technical support and advice to assigned customers.</p> <h4>Principal accountabilities</h4> <p>(Typical duties include the following, although specific duties vary by assignment or contract)</p> <ul> <li>Provide technical guidance and advice to the customer.</li> <li>Present a positive image of self and company’s services.</li> <li>Work effectively with differing customers and cultures.</li> <li>Maintain a safe work environment and ensure compliance with safety objectives and policies.</li> <li>Provide inspection support and perform repairs, sustainment maintenance, retrofits, and modifications to multiple platform vehicles.</li> <li>Conduct technical analysis of vehicle implementations, modifications, and enhancements.</li> <li>Troubleshoot technical problems and issues and determine technical solutions.</li> <li>Act as local on-site representative to customer's organization.</li> <li>Document and submit company expense reports and timecards.</li> <li>Perform other qualified duties as assigned.</li> </ul> <h4>Knowledge & skills</h4> <ul> <li>Must have direct knowledge of material handling equipment (MHE) such as cranes, forklifts and loaders.</li> <li>Must be able to inspect, test and repair the mentioned MHE.</li> <li>Knowledgeable of U.S. military vehicle maintenance management processes, publications, and guidelines.</li> <li>Ability to use all types of engineering drawings, schematics, diagrams, and technical specification sheets.</li> <li>Ability to use all types of power tools, lifting devices, or support equipment including chains.</li> <li>Familiar with the use and operation of TMDE (test, measurement and diagnostic equipment).</li> <li>Must be able to function with minimal supervision.</li> <li>Ability to obtain and maintain a US passport.</li> </ul> <h4>Experience & education</h4> <ul> <li>High school diploma or GED required.</li> <li>Class A or B CDL preferred.</li> <li>Four (4) years certified vehicle maintenance required.</li> <li>ASE level certification in vehicular and component level fault diagnostics and maintenance or military equivalent.</li> <li>Prior instructional experience delivering technical training in fault diagnostics and maintenance/repair.</li> </ul> <h4>Physical requirements/working environment</h4> <ul> <li>Must be willing and able to work in extreme temperatures.</li> <li>Capability to lift 55lbs without assistance.</li> <li>Must be able to meet medical and physical fitness requirements to enter and maintain deployment in accordance with customer requirements.</li> <li>Live and work in an austere environment in an active combat zone most likely under U.S. government control.</li> </ul> <h4>Travel</h4> <ul> <li>Able to travel domestically and internationally.</li> <li>Relocate to different locations within the AOR on short notice to support assignment.</li> </ul> <h4>Disclaimer</h4> <p>The above information on this description has been designed to indicate the general nature and level of work performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of employees assigned to this job.</p></p><p></p>

<p><h4>Location</h4> <p>Erbil, Iraq</p> <h4>Purpose and scope</h4> <p>Performs a variety of warehouse functions in support of a distribution depot. Interfaces with customers to verify discrepancies and resolve as appropriate. Performs quality assurance duties in support of the warehouse function.</p> <h4>Essential responsibilities</h4> <ul> <li>Assists in the planning, coordinating, and integrating the overall logistics / supply support requirements of all organic ground vehicle assets.</li> <li>Reviews available documents on operational mission requirements and recommends the most suitable organic and cost-effective logistics / supply support concepts.</li> <li>Participates in the planning and evaluation of exercises to ensure that logistics / supply support concepts are responsive to operational needs. Makes recommendations for improvements where necessary to increase the effectiveness of support required.</li> <li>Determines the need for, prepares, and conducts individual and group training, as required, on areas of interest within the logistics / supply area.</li> <li>Prepares correspondence on a daily basis on a variety of logistics / supply related issues as may be required.</li> <li>As directed, performs a variety of warehousing duties, which require an understanding of the establishment's storage plan.</li> <li>Verifies materials (or merchandise) against receiving documents, noting and reporting discrepancies and obvious damages.</li> <li>Stores, stacks, or palletizes materials in accordance with prescribed storage methods.</li> <li>May operate hand or power trucks in performing warehousing duties.</li> <li>Performs miscellaneous quality assurance duties including inspections, inventory process checks, inspecting and examining materials, article inspections, etc.</li> <li>Performs all other position related duties as assigned or requested.</li> </ul> <h4>Minimum position knowledge, skills, and abilities required</h4> <p>Vocational / technical training beyond high school and at least 5 years of job-related experience or equivalent.</p> <h4>Work environment, physical demands, and mental demands</h4> <p>Typical warehouse environment with no unusual hazards, frequent lifting to 20-60 pounds, kneeling, standing, and walking, routinely sitting and constant use of speech / hearing abilities for communication, constant mental alertness, must possess planning / organizing skills, and must be able to work under deadlines.</p> <h4>Other responsibilities</h4> <p><strong>Safety</strong> - Enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid / buddy aid responsibilities, participating in emergency response tasks and serving on safety committees and teams.</p> <p><strong>Quality</strong> - Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the Quality Policy and carry out job activities in compliance with applicable Quality System documents and customer contracts. Each employee must read and understand his / her Quality Management and Customer Satisfaction responsibilities.</p> <p><strong>Procedure compliance</strong> - Each employee must read, understand and implement the general and specific operational, safety, quality and environmental requirements of all plans, procedures and policies pertaining to his / her job.</p></p><p></p>

<p><h4>Location</h4> <p>Erbil, Iraq</p> <h4>Purpose and scope</h4> <p>Performs a variety of warehouse functions in support of a distribution depot. Interfaces with customers to verify discrepancies and resolve as appropriate. Performs quality assurance duties in support of the warehouse function.</p> <h4>Essential responsibilities</h4> <ul> <li>Assists in the planning, coordinating, and integrating the overall logistics / supply support requirements of all organic ground vehicle assets.</li> <li>Reviews available documents on operational mission requirements and recommends the most suitable organic and cost-effective logistics / supply support concepts.</li> <li>Participates in the planning and evaluation of exercises to ensure that logistics / supply support concepts are responsive to operational needs. Makes recommendations for improvements where necessary to increase the effectiveness of support required.</li> <li>Determines the need for, prepares, and conducts individual and group training, as required, on areas of interest within the logistics / supply area.</li> <li>Prepares correspondence on a daily basis on a variety of logistics / supply related issues as may be required.</li> <li>As directed, performs a variety of warehousing duties, which require an understanding of the establishment's storage plan.</li> <li>Verifies materials (or merchandise) against receiving documents, noting and reporting discrepancies and obvious damages.</li> <li>Stores, stacks, or palletizes materials in accordance with prescribed storage methods.</li> <li>May operate hand or power trucks in performing warehousing duties.</li> <li>Performs miscellaneous quality assurance duties including inspections, inventory process checks, inspecting and examining materials, article inspections, etc.</li> <li>Performs all other position related duties as assigned or requested.</li> </ul> <h4>Minimum position knowledge, skills, and abilities required</h4> <p>Vocational / technical training beyond high school and at least 5 years of job-related experience or equivalent.</p> <h4>Work environment, physical demands, and mental demands</h4> <p>Typical warehouse environment with no unusual hazards, frequent lifting to 20-60 pounds, kneeling, standing, and walking, routinely sitting and constant use of speech / hearing abilities for communication, constant mental alertness, must possess planning / organizing skills, and must be able to work under deadlines.</p> <h4>Other responsibilities</h4> <p><strong>Safety</strong> - Enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid / buddy aid responsibilities, participating in emergency response tasks and serving on safety committees and teams.</p> <p><strong>Quality</strong> - Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the Quality Policy and carry out job activities in compliance with applicable Quality System documents and customer contracts. Each employee must read and understand his / her Quality Management and Customer Satisfaction responsibilities.</p> <p><strong>Procedure compliance</strong> - Each employee must read, understand and implement the general and specific operational, safety, quality and environmental requirements of all plans, procedures and policies pertaining to his / her job.</p></p><p></p>

<p><h4>Job description</h4> <p>The computer systems analyst I provides several phases of the required systems analysis where the nature of the system is predetermined, uses established fact-finding approaches, knowledge of pertinent work processes and procedures, and familiarity with related computer programming practices, system software, and computer equipment.</p> <p>This analyst provides several phases of the required systems analysis where the nature of the system is predetermined, uses established fact-finding approaches, knowledge of pertinent work processes and procedures, and familiarity with related computer programming practices, system software, and computer equipment.</p> <p>Carries out fact finding and analyses as assigned, usually of a single activity or a routine problem, and applies established procedures where the nature of the system, feasibility, computer equipment, and programming language have already been decided.</p> <p>May assist a higher-level systems analyst by preparing the detailed specifications required by computer programmers from information developed by the higher-level analyst.</p> <p>May research routine user problems and solve them by modifying the existing system when the solutions follow clear precedents.</p> <p>Prepare cost and deadline estimates as required for review.</p> <p>Works independently to adapt guides to specific situations; resolve problems and deviations according to established practices; and obtain advice where precedents are unclear or not available.</p> <p>Carries out objectives, priorities, and deadlines as defined by the supervisor.</p> <p>May supervise technician and others who assist in specific assignments.</p> <p>Will have some variation within and across contracts and may list additional or specific job duties related to assigned function/level which are not aforementioned.</p> <h4>Minimum requirements</h4> <p>High school diploma or equivalent is required. Certification of education level is required.</p> <p>CompTIA Security+ certification.</p> <p>Must possess two (2) years of related experience in computer systems analysis.</p> <p>Ability to obtain and maintain a US government SECRET clearance is required (prefer active Secret clearance). US citizenship is required for SECRET clearance at this work location.</p> <p>A valid U.S. passport is required to travel internationally. Passport must have a minimum of 6 blank pages and 2 plus year validity on expiration date of passport.</p> <p>Must be able to pass CENTCOM medical requirements for deployment.</p> <p>Must be able to obtain a visa in CENTCOM locations.</p> <h4>Knowledge & skills</h4> <ul> <li>Requires competence in most phases of system analysis.</li> <li>Systems analysis and design skills in an area such as a record keeping or scientific operation.</li> <li>Knowledge of pertinent system software and computer equipment.</li> <li>Knowledge of work processes, applicable regulations, and practices of the assigned subject-matter area.</li> <li>Ability to recognize probable interactions of related computer systems and predict impact of a change in assigned system.</li> <li>Good problem-solving skills.</li> <li>Self-motivated and the ability to work independently.</li> </ul> <h4>Physical requirements/working environment</h4> <ul> <li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li> <li>Must be able to lift/push/pull minimum of 50 pounds.</li> <li>May work in maintenance shop or outside.</li> <li>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</li> <li>May be exposed to extreme noise from operating equipment.</li> <li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li> <li>May be expected to work in austere environments and all weather conditions.</li> </ul></p><p></p>

<p><h4>Job description</h4> <p>The UH-60 aircraft mechanic AM-II performs the full range of military tactical aircraft maintenance and maintains, repairs, and troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneumatic and hydraulic systems, engines, auxiliary power unit, and ventilation and heating systems.</p> <p>Remove and install aircraft subsystem assemblies and components such as engines, rotors, transmissions, mechanical flight controls and their components.<br> Service and lubricate aircraft and subsystems.<br> Safely prepare aircraft for inspections and maintenance checks and services.<br> Perform scheduled inspections and assist in performing special inspections.<br> Perform limited maintenance operational checks and diagnose and troubleshoot aircraft systems using special tools and test equipment as required.<br> Use and perform operator maintenance on tools, special tools, and aircraft ground support equipment.<br> Apply comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as aircraft technical manuals, maintenance information and action messages, and all technical guidance provided through government official representatives.<br> Maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components.<br> Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and use required expertise in restoring equipment condition and/or operation.<br> Participate in maintenance test flights and operation checks as required.<br> Perform other duties as requested.</p> <h4>Minimum requirements</h4> <p>High school diploma or equivalent required.<br> Three (3) or more years aviation maintenance experience within the past five (5) years on the (MDS)-UH60.<br> OR FAA A&P license AND two (2) years of aviation maintenance experience within the past five (5) years on the (MDS)-UH60.<br> U.S. military technical school or specialized training course is desired; certification of education level is required.<br> Must be in possession of a valid U.S. passport valid for 2 years at the time of hiring and be able to travel internationally.<br> Must be able to obtain and maintain facility public trust NAC-I. <strong>Note: US citizenship is required for facility public trust NAC-I at this work location.</strong><br> Must be able to clear CENTCOM MOD physical requirements for deployment training (will be required to attend CRC (DIDC)).<br> Must be able to obtain Iraq visa.</p> <h4>Knowledge and skills</h4> <p>Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures, and replacement of parts.<br> Broad knowledge of aircraft sheet metal/structural modifications and repair.<br> Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes, and shears.<br> Working knowledge of technical publications and logistics information systems.<br> Able to prioritize workloads to maintain schedules on assigned projects and may be required to lead teams through more complex aircraft relevant tasks.<br> Participate in maintenance test flights and operation checks as required.<br> Possess the level of experience to inspect all required aeronautical type maintenance to be performed by mechanics.<br> The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.</p> <h4>Physical requirements / working environment</h4> <p>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.<br> Must be able to climb stairs, ramps, ladders, and work stands.<br> Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee, and reach above/below shoulders.<br> May be required to lift heavy objects whose weight may exceed 50 pounds.<br> Must be able to type using a standard keyboard to communicate through e-mail and various software applications.<br> Will handle dirty parts and lubricants.<br> Will be required to wear proper personal protective equipment (PPE).<br> Must be able to pass a respirator physical and fit test.<br> May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.<br> Must be able to lift/push/pull minimum of 50 pounds.<br> May work in maintenance shop or outside.<br> Must be able to work in a shop where the environment is drafty, noisy, and dirty.<br> May be exposed to extreme noise from operating equipment.<br> May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.<br> May be expected to work in austere environments and all-weather conditions.</p></p><p></p>

<p><h4>Job description</h4> <p>The non-destruction inspection technician (NDI) II inspects aerospace weapon systems components and support equipment for structural integrity using nondestructive inspection methods and performs fluid analysis.</p> <p>Determine test method and prepare fluids and parts for nondestructive inspection.<br> Interpret nondestructive inspection test results and provide information about defects to repair center.<br> Analyze wear metal content reports on engine lubricating oil and other fluids and recommend corrective action.<br> Establish radiation areas for radiographic operations.<br> Compute and monitor personal exposure areas for radiographic operations, and monitor personnel exposure data.<br> Perform nondestructive inspection on structures, components, and systems.<br> Detect flaws such as cracks, delaminations, voids, processing defects, and heat damage using penetrant testing, eddy current, magnetic particle, radiographic, optical, and ultrasonic test equipment.<br> Determine metallurgical information of components according to alloy, temper, conductivity, and associated factors.<br> Operate, maintain, and inspect nondestructive equipment.<br> Perform operator maintenance and service inspections on shop equipment and tools.<br> Ensure lock out and tag out procedures are accomplished prior to maintenance on equipment.<br> Perform silver recovery functions.<br> Handle and dispose of hazardous waste and materials.<br> Perform other qualified duties as assigned.</p> <h4>Minimum requirements</h4> <p>High school diploma or equivalent required.<br> U.S. military technical school or specialized training course is desired, certification of education level is required.<br> Completion of an initial nondestructive inspection level II training course and current basic qualification.<br> Three (3) or more years’ experience as an aviation inspector and a minimum of one year experience on the assigned (MDS) airframe (UH60, AH64, CH47).<br> Shall be trained and qualified per NAS 410 or ASNT-CP-189 to the level assigned.<br> Must be in possession of a U.S. passport with 3 years of validity remaining at the time of hire and be able to travel internationally.<br> Ability to obtain and maintain a US government security clearance, NAC-I T1 public trust. US citizenship is required to obtain a T1/CAC NACI clearance.<br> Able to clear CENTCOM medical requirements for deployment.<br> Ability to obtain and maintain Iraq visa.</p> <h4>Knowledge and skills</h4> <ul> <li>Previous experience in the maintenance, modification and repair of tactical aircraft systems of the type being serviced and their associated components (UH60, AH64, CH47).</li> <li>Have the skills and knowledge to set up and standardize equipment, conduct tests, interpret and evaluate for acceptance or rejection, and document.</li> <li>Thoroughly familiar with the scope and limitations of the technique/method in which they are certified.</li> <li>Capable of providing the necessary guidance and supervision to trainers and Level I personnel in the technique/method in which they are certified.</li> <li>Familiar with the codes, standards, and other contractual documents that control the method as utilized by the employer.</li> <li>Capable of developing written instructions from approved general procedures. Such instructions shall require final approval by a Level III.</li> <li>Knowledge of electrical, mechanical, electronic, hydraulic and pneumatic systems or other technology as applicable to fabrication, repair, operation and maintenance requirements.</li> <li>Efficient in record keeping and preparation of reports; capable of reviewing other people's work and determining accuracy and conformity to standards.</li> <li>Proficient in the use of the Unit Level Logistics System-Aviation Enhanced (ULLS-AE), the current maintenance management system utilized to maintain Army aircraft forms and records.</li> <li>Comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components.</li> <li>Thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems.</li> <li>Detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and shears, etc. is required.</li> <li>Ability to provide technical support to structural/mechanical engineers and customers.</li> <li>Excellent organizational skills in prioritizing workload to meet aircraft delivery schedule.</li> </ul> <h4>Physical requirements and working environment</h4> <ul> <li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li> <li>Must be able to climb stairs, ramps, ladders, and work stands.</li> <li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li> <li>May be required to lift heavy objects whose weight may exceed 50 pounds.</li> <li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li> <li>Will handle dirty parts and lubricants.</li> <li>Will be required to wear proper personal protective equipment (PPE).</li> <li>Must be able to pass a respirator physical and fit test qualification.</li> <li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</li> <li>Must be able to lift/push/pull minimum of 50 pounds.</li> <li>May work in maintenance shop or outside.</li> <li>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</li> <li>May be exposed to extreme noise from operating equipment.</li> <li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li> </ul></p><p></p>

<p>In coordination with the RMO, support the R&amp;R Officer PSD in monitoring the financial aspects of all PSD projects, including overseeing expenditure, fund availability, and cash flow management. Proactively prepare expenditure plans, internal monitoring reports, for all PSD projects. Identify and address bottlenecks, recommend solutions, and ensure approval processes are followed. In collaboration with PSD Project Officers, PSD Reporting Officer, Partnerships and Coordination Division and RMU, provide support to the R&amp;R Officer in drafting and reviewing project budgets. Assist in conducting analyses on variations between budgeted and actual expenditures and forecast future budget requirements. In collaboration with Resources Management Officer (RMO), identify any unusual trends and notify Project Managers and RMO for timely action and potential remedies to keep projects on track. In collaboration with PSD Officers and relevant technical staff, participate in the design of solutions for PSD's operational requirements. This includes new systems, processes, or tools to meet the identified needs. Support the R&amp;R Officer and program staff in coordinating internal activities and pay particular attention to emerging and cross-cutting issues and work closely with the R&amp;R Officer to address them. Support the successful implementation of PSD projects by facilitating timely and appropriate resource mobilization. Proactively identify opportunities for program development. In coordination with the PSD Reporting Officer conduct project monitoring and evaluation activities through field visits, identify opportunities for development, and flag accountability issues and solutions to the Head of PRD. Support the PSD Project Officers in forecasting cash flows based on project activities and ensure financial expenditures and records adhere to donor agreements. Monitor and track projectization for PSD staff and operations. Track commitments, precommitments, and expenditures to ensure operations align with the project budget. Support program staff in the procurement, transportation and facilitating access in all regions of the country. Collaborate with the Liaison and Access team to address any access issues. Collaborate with Supply Chain Unit to assess the impact of price changes on the overall procurement process. Determine how the price changes may affect budgets, delivery timelines, and other logistical considerations. Perform any additional duties as assigned.</p><p><strong>Desired Candidate Profile</strong></p><h2>Education</h2><p>University degree in Accounting or Business Administration or in a related field from an accredited academic institution with 5 years of relevant professional experience; or Completed Hight School Degree in the above fields or related field from an accredited academic institution with 7 years of relevant professional experience; Accredited Universities are those listed in the UNESCO World Higher Education Database.</p><h2>Experience</h2><p>Experience in emergency settings and complex environments. Experience in IOM administrative and financial management, budget monitoring, cash management and internal control procedures. Experience in the usage of office software packages (MS Word, Excel, etc.) and knowledge of spreadsheet and data analysis. Experience in working in an international environment and in liaising with a variety of partners at all levels of the hierarchy.</p><h2>Skills</h2><p>Familiarity with IOM/UN administrative and financial management. Excellent coordination and information management skills. Ability to extract, interpret, analyse and format data and make decision rapidly to resolve operational problems. Capacity to work effectively in high-pressure, rapidly changing environments. Ability to meet deadlines and work under pressure. Personal commitment, efficiency, flexibility, drives for results. Ability to work effectively and harmoniously with colleagues from varied cultures and professional backgrounds. Ability to handle confidential matters.</p><h2>Languages</h2><p>Fluency in English is required Arabic and Kurdish are advantage Languages. IOM s official languages are English, French and Spanish. Proficiency of language(s) required will be specifically evaluated during the selection process, which may include written and/or oral assessments.</p><h2>Required Competencies</h2><p>IOM s competency framework can be found at this link . Competencies will be assessed during the selection process.</p><h2>Values</h2><p>all IOM staff members must abide by and demonstrate these three values:</p><ul><li><strong>Inclusion and respect for diversity:</strong> Respects and promotes individual and cultural differences. Encourages diversity and inclusion.</li><li><strong>Integrity and transparency:</strong> Maintains high ethical standards and acts in a manner consistent with organizational principles/rules and standards of conduct.</li><li><strong>Professionalism:</strong> Demonstrates ability to work in a composed, competent and committed manner and exercises careful judgment in meeting day-to-day challenges.</li></ul><h2>Courage:</h2><p>Demonstrates willingness to take a stand on issues of importance.</p><h2>Empathy:</h2><p>Shows compassion for others, makes people feel safe, respected and fairly treated.</p><h2>Core Competencies behavioural indicators (Level 2)</h2><ul><li><strong>Teamwork:</strong> Develops and promotes effective collaboration within and across units to achieve shared goals and optimize results.</li><li><strong>Delivering results:</strong> Produces and delivers quality results in a service-oriented and timely manner. Is action oriented and committed to achieving agreed outcomes.</li><li><strong>Managing and sharing knowledge:</strong> Continuously seeks to learn, share knowledge and innovate.</li><li><strong>Accountability:</strong> Takes ownership for achieving the Organization s priorities and assumes responsibility for own actions and delegated work.</li><li><strong>Communication:</strong> Encourages and contributes to clear and open communication. Explains complex matters in an informative, inspiring and motivational way.</li></ul><h2>Managerial Competencies behavioural indicators (Level 2)</h2><p>(applicable only if position is with direct reports)</p><ul><li><strong>Leadership:</strong> Provides a clear sense of direction, leads by example and demonstrates the ability to carry out the Organization s vision. Assists others to realize and develop their leadership and professional potential.</li><li><strong>Empowering others:</strong> Creates an enabling environment where staff can contribute their best and develop their potential.</li><li><strong>Building Trust:</strong> Promotes shared values and creates an atmosphere of trust and honesty.</li><li><strong>Strategic thinking and vision:</strong> Works strategically to realize the Organization s goals and communicates a clear strategic direction.</li><li><strong>Humility:</strong> Leads with humility and shows openness to acknowledging own shortcomings.</li></ul>

<p>What we do Since 1863, the International Committee of the Red Cross (ICRC) has worked to preserve human dignity and relieve suffering caused by war and armed violence. In collaboration with our Red Cross and Red Crescent partners around the world, we do everything we can to deliver life-saving aid, reconnect families and locate missing people helping those who need it most, regardless of who they are and what side of the front line they are on. We engage with authorities and armed forces on all sides, often confidentially, pressing for access to detainees to improve their living conditions and urging compliance with international humanitarian law to protect non-combatants, including from digital threats.</p><p>Purpose The Light Vehicles Driver transports people and goods in a safe and timely manner, in accordance with ICRC rules and regulations and national traffic laws.</p><p>Accountabilities &amp; functional responsibilities</p><ul><li>Drives light vehicles to transport people and/or material in strict adherence to internal security rules and national traffic laws.</li><li>Follows the safety and security guidelines and is aware of/and reacts to the current security situation.</li><li>Constantly monitors security conditions on the road.</li><li>Ensures that goods are stored inside the vehicle according to local, international and ICRC safety standards (attachment and distribution of goods, etc.).</li><li>Checks their assigned vehicle(s)' equipment, general functioning and body condition and ensures that it is kept fuelled and clean inside and out.</li><li>Checks that trips have been authorized where necessary.</li><li>Immediately reports accidents, defects and/or missing equipment to management.</li><li>Can act as head of convoy as needed (in charge of the driver(s), application of security rules and time-frame for the convoy).</li><li>Ensures that risks are mitigated by performing the controls assigned to his/her role as described in the Logistics Risk and Control Matrix</li></ul><p>What we offer</p><ul><li>By joining our organization, you will have an opportunity to practise your profession in stimulating, complex, and sometimes challenging environments, where your work can really make a difference.</li><li>You will work with colleagues from various fields of expertise in a cross-cutting manner to help victims of conflict and other situations of violence. You will be dealing with humanitarian situations that require experience, resourcefulness, and innovation to achieve the best possible impact.</li><li>You will work for the oldest major international humanitarian organization in the world, adding to your sense of achievement in alleviating the suffering of people and communities and giving you the chance to promote humanitarian values in these turbulent times.</li><li>You will benefit from a competitive employment package, including different possibilities for career and personal development. You will take part in an onboarding course and follow continuous training to build your career within the ICRC and beyond.</li><li>Competitive compensation package, a monthly salary with benefits including (13th salary, International Retirement Saving Plan (IRSP), medical coverage, life insurance, mobility allowance).</li></ul><p><br></p><p><strong>Desired Candidate Profile</strong></p><h2>Certifications / Education required</h2><ul><li>Secondary school diploma.</li><li>Driving license B (BE, B1) held for at least five years.</li></ul><h2>Professional experience required</h2><ul><li>At least 3 5 years of professional driving experience with a clean driving record.</li><li>Automobile maintenance experience (oil checks, changing tyres, etc.).</li><li>Basic knowledge of mechanics.</li><li>Good knowledge of the area of assignment.</li></ul><h2>Language</h2><ul><li>Fluent in Kurdish (spoken and written)</li><li>Knowldge of English and Arabic (written and spoken) is an asset.</li></ul>

<p><b>Main Duties and Responsibilities:</b></p><p>Lead, mentor, and develop the finance team to ensure high performance and adherence to financial standards.</p><p>Design, implement, and continuously improve financial processes, internal controls, and reporting systems.</p><p>ERP Implementation and Chart of Accounts preparation and Module integration.</p><p>Collaborate with the project teams, consultants, and other units, etc. for the budget preparation and collect necessary information which is required for the financial planning.</p><p>Implement banking strategy and proactively plan for the treasury and working capital for the short-term and long-term financial planning.</p><p>Negotiate with banks for the charges and the options to execute the transfers without delays.</p><p>Prepare and deliver financial reports, analyses, and recommendations to senior management for informed decision-making.</p><p>Perform budget vs. actual analyses, highlighting variances and proposing corrective actions or cost-saving strategies.</p><p>Oversee payroll processing, including calculations, deductions, approvals, and record maintenance.</p><p>Execute internal and external payments in accordance with approvals and organizational procedures.</p><p>Monitor project expenditures, track commitments, and ensure alignment with approved budgets and funding sources.</p><p>Ensure compliance with tax obligations, social security reporting, and other statutory requirements.</p><p>Support employees in banking matters, including account setup and necessary identification processes.</p><p>Manage relationships with banks, vendors, and key stakeholders to ensure smooth and timely financial operations.</p><p>Identify opportunities to optimize workflows, reduce financial risk, and enhance reporting accuracy.</p><p>Report any issues or discrepancies promptly to the line manager or HR and take corrective measures.</p><p>Adhere to organizational values, policies, and procedures in all financial activities.</p><p>Identify the risk involved in the transactions and provide suggestions to senior management for mitigating the risk.</p><p>Perform any other tasks assigned by the line manager.</p><p><strong>Desired Candidate Profile</strong></p><p>Bachelor s degree in Finance, Accounting, Economics, or a related field.</p><p>A master's degree or finance-related certification (e.g., CPA, ACCA, CFA, CMA) is highly desirable.</p><p>Previous experience [7-9 years] in finance and accounting, financial management, accounting, or auditing.</p><p>Minimum [2 3 years] in a supervisory or managerial role.</p><p>Proven experience in budgeting, financial reporting, and audit coordination.</p><p>Strong organization, planning, and execution skills.</p><p>Strong leadership and team management skills.</p><p>Excellent analytical, budgeting, and financial forecasting abilities.</p><p>In-depth knowledge of accounting principles, financial systems, and audit practices.</p><p>Excellent attention to detail and high level of accuracy.</p><p>Proficiency in Microsoft Excel and financial reporting tools.</p><p>Solid understanding of accounting principles and financial statements.</p><p>Strong English is required; Kurdish is desired.</p><p>Prepared to work additional hours when required.</p><p>Report any issues to the line manager or HR.</p><p>Adhere to SP office values, policies, and procedures.</p><p>Traveling to other locations within or outside the country for work and staying overnight.</p><p>Maintain confidentiality of information.</p><p>Government experience</p><p>Experience using accounting or ERP systems.</p><p>Background in developing or improving financial management systems.</p>

<p>Carry out different assignments of the financial and operational audits for the company and ensures the work is performed with the professional care and in accordance with the appropriate standards. These different activities involve conducting performance, operational, financial and compliance audits. Perform financial and operational audits in accordance with Asiacell internal audit methodology. Conduct interviews, review documents, audit surveys, compose summary memos, and prepare working papers. Assist in the preparation of the audit programs with appropriate testing mechanisms, execute the audit program, recognize control weaknesses, asses the materiality of these weaknesses, and relate them back to the scope and objective of the audit. Identify, develop, and document audit observations and recommendations for improvement. Assist in communicating the results, findings and recommendations of audit projects in a timely basis to management Follow up the implementation of the audit recommendations in a timely manner, as per the agreed-on follow-up programs. Interact with staff, section heads, and managers and when necessary, with department directors in order to obtain and/or communicate relevant information to achieve the objective/s of the financial &amp; operational audits. Maintain all organizational and professional ethical standards and ensure internal audit activities are carried out in compliance with international standards for the professional practice of internal auditing, IIA code of ethics. Special assignments and investigations. Assists in the conduct of any fraud investigations or any special audit assignments as instructed by Sr. Manager. Assists in communicating the results, findings and recommendations of special assignments/investigations via written reports and presentations on a timely basis to the management Development &amp; improvement program Pursue professional development opportunities, including external and internal training and professional association memberships, and shares information gained with co-workers. Proactively take responsibility for self-improvement by staying well-informed of developments, knowledge and innovations in relevant field of expertise.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in accounting or equivalent</li><li>Behavioral Competencies: Delivering Results &amp; Fostering Ownership Building Customer Value Networking &amp; Influencing Collaboratively Leading Teams Driving Change</li><li>Technical Competencies: Technical Writing and Reporting Critical Thinking Business English International Professional Practices Framework Internal Audit Planning &amp; Execution Business Acumen Telecom Market &amp; Industry Knowledge Digital Technology Knowledge</li></ul>

<p>We are seeking a seasoned and strategic Treasury Manager to take full ownership of the group treasury department for our mega-scale oil and gas conglomerate based in Erbil, Iraq. Reporting directly to the Chief Financial Officer (CFO), the Treasury Manager will lead all aspects of corporate treasury, multi-currency liquidity management, complex trade finance instruments, loan facility structuring, and high-level banking relationship management across local, regional, and international financial institutions.</p><p><b><br></b></p><p><b>KEY RESPONSIBILITIES</b></p><p>Trade Finance &amp; Banking Facilities</p><ul><li>Lead all trade finance operations across the conglomerate, directing the issuance, negotiation, amendment, and settlement of Letters of Credit (LCs) and Letters of Guarantee (LGs).</li><li>Negotiate competitive terms, credit limits, pricing, and covenants for corporate loans, working capital facilities, project financing, and revolving credit lines.</li><li>Serve as the primary senior liaison to local, regional, and international commercial banks, maintaining strong institutional partnerships.</li></ul><p>Liquidity Management &amp; Cash Flow Projections</p><ul><li>Design, implement, and maintain advanced group-wide rolling cash flow models, daily liquidity forecasting, and long-term capital allocation strategies.</li><li>Optimize multi-entity and multi-currency cash positioning across international accounts to support large-scale oil &amp; gas upstream, midstream, and downstream operations.</li><li>Execute foreign exchange (FX) risk management and hedging strategies to mitigate currency and interest rate exposure.</li></ul><p>Governance, Compliance &amp; Treasury Operations</p><ul><li>Establish, enforce, and audit group treasury standard operating procedures (SOPs), financial controls, and risk mitigation frameworks.</li><li>Collaborate closely with group accounting, procurement, and operations teams to align liquidity schedules with major capital expenditures (CapEx) and operational expenditures (OpEx).</li><li>Deliver comprehensive monthly and quarterly treasury performance dashboards, cost-of-capital analyses, and risk reports directly to the CFO and Board members.</li></ul><p>CORE SKILL FOCUS</p><p>Comprehensive group treasury leadership, trade finance (LCs &amp; LGs), syndicated loans &amp; credit facility negotiations, corporate banking relations, liquidity optimization, cash flow forecasting, and FX risk management within the Oil &amp; Gas sector.</p><p><strong>Desired Candidate Profile</strong></p><p>Experience: Minimum 15 years of progressive corporate treasury experience, with a proven track record leading group treasury operations in mega-scale conglomerates, energy, or oil &amp; gas sectors.</p><p>Trade Finance Mastery: Deep hands-on expertise in structuring and managing LCs, LGs, syndicated debt, trade loans, and complex banking facilities.</p><p>Languages: Full professional bilingual fluency in both Arabic and English (written and spoken) is strictly required.</p><p>Education &amp; Credentials: Bachelor's degree in Accounting, Finance, or Economics. Professional designations such as CTP (Certified Treasury Professional), AMCT/MCT, or CFA/MBA are strongly preferred.</p><p>Mobility &amp; Sourcing: Based in or willing to relocate to Erbil, Iraq (applications welcomed from inside or outside Iraq).</p><p>Schedule &amp; Availability: Standard 5-day working week; availability to join immediately or within 30 days is highly preferred.</p>