وظائف مصمم مطابخ - البصره العراق

<p><h4>E&I Engineer</h4> <p>KBR Sustainable Technology Solutions (STS) provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design capabilities, and smart solutions to optimize planned and operating assets.</p> <p>Responsible for start-up and plant operations activities including equipment and system checkout, inspection for proper installation, review for correct design, and calculation of expected system and equipment operating parameters under temporary start-up conditions. Coordinates start-up operations, including the direction of craft, and all other start-up activities such as flushing, chemical cleaning, and initial equipment and system operation. Coordinates performance tests and calculates test results and heat balances. Performs calculations required to properly evaluate design changes, provides engineering reports for the engineering department to assist in design change preparation. Works with client at the site.</p> <p>Under general supervision, performs all conventional aspects of the functional area subject matter. Devises new approaches to problems encountered. Plans, schedules, and conducts work requiring judgment in the independent evaluation, selection, and adaptation of engineering techniques, procedures, and criteria. Performs work which involves conventional engineering practice but may include a variety of complex features such as conflicting design requirements, unsuitability of conventional materials, and difficult coordination requirements. Provides technical guidance to designers and less experienced engineers.</p> <p>Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability, or operations. Skills are typically acquired through an undergraduate degree in engineering and a minimum of 10 years related experience, with average experience ranging from 10-15 years.</p></p><p></p>

<p><h4>E&I Engineer</h4> <p>KBR Sustainable Technology Solutions (STS) provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design capabilities, and smart solutions to optimize planned and operating assets.</p> <p>Responsible for start-up and plant operations activities including equipment and system checkout, inspection for proper installation, review for correct design, and calculation of expected system and equipment operating parameters under temporary start-up conditions. Coordinates start-up operations, including the direction of craft, and all other start-up activities such as flushing, chemical cleaning, and initial equipment and system operation. Coordinates performance tests and calculates test results and heat balances. Performs calculations required to properly evaluate design changes, provides engineering reports for the engineering department to assist in design change preparation. Works with client at the site.</p> <p>Under general supervision, performs all conventional aspects of the functional area subject matter. Devises new approaches to problems encountered. Plans, schedules, and conducts work requiring judgment in the independent evaluation, selection, and adaptation of engineering techniques, procedures, and criteria. Performs work which involves conventional engineering practice but may include a variety of complex features such as conflicting design requirements, unsuitability of conventional materials, and difficult coordination requirements. Provides technical guidance to designers and less experienced engineers.</p> <p>Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability, or operations. Skills are typically acquired through an undergraduate degree in engineering and a minimum of 10 years related experience, with average experience ranging from 10-15 years.</p></p><p></p>

<p><h4>Key accountabilities</h4> <p><strong>•</strong> Promotes a culture of open safety reporting and continuous improvement.<br> <strong>•</strong> Contribute to an environment in which all team members are respected regardless of their individual differences and are motivated to improve both their individual and team contributions to achieve desired business results.<br> <strong>•</strong> Accountable for supplying an accurate maintenance schedule to allow effective and efficient asset maintenance, covering multi-discipline preventative (PM) and corrective (CM) maintenance activity.<br> <strong>•</strong> Support station MAs in ensuring no overdue maintenance (SCE and anomaly management) to reduce risk to production, personnel, plant, and environment.<br> <strong>•</strong> Responsible for supporting maintenance team requests for contractor support (CTRs) from end to end, ensuring MAs provide:<br> <li>quality of scope of work</li> <li>accurate cost review and challenge against the supplied resources, equipment utilisation, and materials</li> <li>accurate durations</li> <strong>•</strong> Responsible for the management of processes and standards, and monitoring the agreed upon KPIs, taking appropriate actions to close the deviations from maintenance team objectives.<br> <strong>•</strong> Drives compliance with the standardized work management process, particularly in Primavera scheduling application (P6).<br> <strong>•</strong> Maintains the required daily updates and progress in the following:<br> <li>O&M tracker (daily)</li> <li>Maintenance P6 schedule (daily)</li> <li>Flowline leak tracking report (daily)</li> <li>Safety critical report (daily)</li> <li>Fabrication tracker (weekly)</li> <li>SC 14 and 90 day report and forecast (weekly)</li> <li>Maintenance overview report (weekly)</li> <li>Contract fund management (weekly)</li> <strong>•</strong> Support station planners for weekly backlog management within their area of responsibility to clean up and prioritize work.<br> <strong>•</strong> Recommends execution optimization and nesting opportunities to the station maintenance advisor and maintenance manager.<br> <strong>•</strong> Chairs the 6/12 week maintenance activity schedule – deputises for maintenance manager when not available to ensure good compliance with gate criteria and accuracy of O&M information. Seeks nesting opportunities for all activities and ensures no activities at risk (red flag) will be carried into the 6 week schedule window without prior agreement with FMM.<br> <strong>•</strong> Champion continuous improvements (CI) by standardizing best practice activities across site and maintenance teams:<br> <li>optimize maintenance strategy</li> <li>improvements to maintenance build</li> <li>optimize materials look-up and staging</li> <strong>•</strong> Coach and mentor the station planner in the role.</p> <h4>Experience, qualifications & key skills</h4> <p><strong>•</strong> Above 12 years experience in O&G industry (preferably with IOC’s direct or contract).<br> <strong>•</strong> Technical degree or HNC certificate in engineering.<br> <strong>•</strong> Experience in previous maintenance lead role (MTL / maintenance superintendent capacity).<br> <strong>•</strong> Practical exposure to production facilities.<br> <strong>•</strong> Proficient in planning tools (Primavera 6).<br> <strong>•</strong> Proficient in CMMS tools (CMMS – Maximo / SAP).<br> <strong>•</strong> Proficient in project management tools (MS Project).<br> <strong>•</strong> Excellent communication, interpersonal, and negotiation skills.<br> <strong>•</strong> Ability to identify proper priorities of maintenance activities in a high activity environment.<br> <strong>•</strong> Driven to deliver continuous improvement.<br> <strong>•</strong> Strong bias for being proactive and getting results.<br> <strong>•</strong> Strong understanding of maintenance planning and scheduling.</p></p><p></p>

<p><h4>About company</h4> <p>Belong, connect, grow, with KBR! The KBR team delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals. KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Job purpose</h4> <p>The field doctor reports to the lead doctor and is responsible for supporting the delivery and coordination of field medical services, including occupational health, emergency preparedness, and medical response activities. The role supports patient care activities in the field, including emergency and trauma response, while ensuring effective medical readiness and timely support for site operations. The field doctor also participates in HSE inspections, safety and health activities, and contributes to the implementation of occupational health and hygiene programs.</p> <p>The position works closely with site management, HSE teams, and contractors to support medical coverage, emergency response capability, and overall workforce health and safety within the field environment.</p> <h4>Duties and responsibilities</h4> <ul> <li>Implement the primary health care program for all personnel and deliver hygiene quality assurance on behalf of IFMS in the Majnoon Oil Field.</li> <li>Ensure effective management of all medical operations in MFD for primary occupational health, emergency and trauma care.</li> <li>Draft and maintain all procedures and health documentation for the IFMS function in line with international standards and local legislation.</li> <li>Ensure effective implementation of health requirements in MFD for both staff and contractors.</li> <li>Prepare activity plans to accomplish all work required by the field procedures and ensure sufficient manpower utilization for work execution.</li> <li>Ensure GLMS systems are maintained with up-to-date FTW information.</li> <li>Follow up on HRA with SMEs and relevant parties to ensure that all control measures are implemented, maintained, and reviewed periodically.</li> <li>Implement an FTW program by giving the required advice and ensure that all employees in the field are physically and mentally fit for their work requirements and support business based on outcomes of fitness to work assessment plan.</li> <li>Set and implement the RTW policy in accordance with IFMS standards and local legislation and provide the required support to all staff and contractors.</li> <li>Provide guidance and enable the emergency and occupational health training for medical staff and other BOC assignees as well as medical service providers.</li> <li>Support the implementation of the Facilities HACCP program within the field through monthly inspections and follow-up of actions for both facilities and contractors.</li> <li>Ensure continuous communication internally with departments, external clients, government, and private health institutes to provide effective support for the business.</li> <li>Ensure the effective implementation of MERP including bridging requirements for contractors.</li> <li>Effectively coordinate MEDIVAC procedures with insurance companies, ER companies, and management.</li> <li>Follow up MEDIVAC cases ensuring all medical aspects are well covered, followed, and closed.</li> <li>Manage all aspects of third-party medical services.</li> <li>Implement and update a medical case action tracker to ensure effective close out of all cases.</li> <li>Support the tendering process by evaluating the contractor’s health systems.</li> <li>Support the RFCE process and ensure that all contractors are ready to mobilize.</li> <li>Review contractor’s documentation ensuring that all are compliant with MFD standards.</li> </ul> <h4>Qualification & training requirements</h4> <ul> <li>MBChB - Bachelor degree in medicine or equivalent.</li> <li>BLS or ALS or ITLS certification.</li> <li>Professional Health Care Council registrations.</li> </ul> <h4>Experience</h4> <ul> <li>Experience in medical operations, emergency response support, healthcare administration, or related activities, preferably in industrial or remote-site environments.</li> <li>Basic knowledge of HACCP principles and food safety requirements, with experience supporting food safety and health compliance activities being an advantage.</li> <li>Good understanding of and demonstrable hands-on experience in all functional aspects of emergency and occupational health and hygiene including HRAs, FTW & FTR, HACCP, water and food safety, communicable disease and preventive medicine, employee support, ergonomic quick scan, health system management, external and internal communications, contractor management, emergencies and MERP management as well as expert in providing health advice and services.</li> </ul> <h4>Language proficiency, computer and software skills</h4> <ul> <li>MS Office: Excel - intermediate, Word – intermediate, PowerPoint – intermediate.</li> <li>Proficient in English – verbal and written.</li> </ul> <h4>Skills</h4> <ul> <li>Skill in conducting fitness to work program.</li> <li>Managerial and team management skills.</li> <li>Knowledge to provide advice and support business based on outcomes of fitness to work assessment plan.</li> <li>Skilled in contributing to the planning and implementation of healthcare requirements within business.</li> <li>Skilled to deliver technical meeting minutes, proposals, inspections, and audits.</li> <li>Good presentation skills in both English and Arabic, enabling the delivery of training, technical presentations, and awareness sessions to expatriates, local staff, and community.</li> <li>In-depth knowledge in social impacts and the enablement of the SP team.</li> <li>Experience in training in the field of occupational health.</li> <li>Control the medical emergency requirements occupational health training for medics and other SOC assignees as well as medical providers.</li> <li>Possess a strong drive towards solving problems that could delay work, especially in volatile locations such as Iraq.</li> <li>Determined to provide maximum support in the field to all contractors and subcontractors to deliver the work on time.</li> <li>Have high ability to work efficiently in high risk and low security areas.</li> <li>Deliver tasks on time despite difficulties in logistics, social, etc.</li> <li>Have experience dealing with local community onsite to deliver high support in the social impact area.</li> <li>Show high drive to change work approaches for the team by changing work scope, area, times, and rotations to suit specific time of the project and works.</li> <li>Have high ability to construct and develop the field health team and put documents and procedures in place.</li> <li>Ability to generate new ways of integrating the team with other departments.</li> <li>Participate efficiently in improving the company reputation through stakeholder management.</li> </ul></p><p></p>

<p>Determine, review and establish the local and international policies, standards and specifications required for mechanical engineering work related to building construction and refurbishment, water supply stations and water wells, water supply networks for the project in Iraq. Carry out inspections of the water supply facilities to be constructed, assess the current situation of the mechanical systems, and design suitable upgrades/replacement of existing mechanical systems to meet the local and international standards and specifications applicable, and in consultation with all stakeholders. And or, propose, design the replacements and new installations. Prepare and/or review detailed mechanical engineering design documentation including drawings, specifications and scope of work reports to be included in water supply facilities construction tender documents. Prepare quality control and quality assurance documentation related to mechanical engineering work for new water supply facilities. and rehabilitation works. Assist the PM, Deputy PM, Water Supply Engineer and the QA/QC Engineer in the preparation of bidding documents for the new water supply facilities. Supervise on-site works carried out by contractors closely on a day to day basis to ensure quality of the works is monitored and controlled as per specification requirements. Prepare and submit progress reports to the Project Manager/Deputy PM at intervals agreed upon. Ensure safety and health of everyone involved in the project and general public by identifying risks and threats, planning, implementing and maintaining internationally acceptable safety standards in all aspects, at all stages of the project. Ensure all design and construction of water supply facilities and mechanical works is carried out in accordance with and in compliance with industry standards and international best practice energy efficiency principles, standards, guidelines and specification. Provide expert advice to all stakeholders including contractors, PM/Deputy PM, project staff , clients and donor agencies on Mechanical engineering related water supply facilities works where required. Preparing Mechanical drawing package including for new and or rehabilitation works. Preparing Mechanical SOW (scope of work) with technical specification including water wells, pump stations, water supply networks and related works, plumbing and fire protection systems. Designing and preparing a package of water supply and sanitation systems for small and medium scale projects. Using S-pipe and D-pipe or any other relevant and applicable software Create and review technical drawings, plans, and specifications using computer software and prepare design packages in line with client`s design planning manual and design reviewers instructions. Coordinate while required, with design reviewers and incorporate their comments if any. Perform detailed documentation to track project development and design process Ensure project timeline is met and project stays within budget Support the project team in the evaluation and endorsement of objectives and goals of contractor plans, including staffing and budgeting, milestone descriptions, risk management strategies, detailed schedules and scope descriptions, and work breakdown structures Check to assure all materials and /equipment have been tested, submitted and approved. Review all submittals to insure compliance with the plans and specification Inspect all material, equipment and mechanical tools delivered, at the time of receipt, to ensure compliance with submittals, and specifications. Resolve technical problems at site and the certification of construction work at site. Recommend design changes, cost reductions, warranty improvements, and manufacturing issues. Perform other duties as may be assigned. Establishment of procedures with time limits for inspection, sampling and testing of works and all other electrical requirements. Implementation and monitoring of quality assessments. Supervises the Quality Control functions/activities of a project or its parts, including Quality Control inspection schedules and the collection of Quality Records. Review all submittals to insure compliance with the plans and specifi cation Daily/Weekly/ Monthly report to the Project Manager on project progress activities. Project reporting Mechanical Engineer is to be reported to Project Manager (PM)</p><p><strong>Desired Candidate Profile</strong></p><p>Excellent oral and written communication skills. Strong interpersonal skills and ability to work as part of a team Very Good Knowledge in written and oral English and Arabic languages is required. Experience in the usage of computers and software packages (Autodesk AutoCAD, Microsoft office and mechanical design software).</p>

<p><h4>Belong, connect, grow, with KBR!</h4> <p>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</p> <p>KBR provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Location</h4> <p>Iraq - KBR office<br> 28/28 rotation</p> <h4>Job purpose</h4> <p>Define piping design bases, codes, standards, and deliverables to ensure safe, reliable, and cost-effective solutions.<br> Single point of contact for piping deliverables and activities related to piping materials.<br> Interface with client, vendor, and other stakeholders for successful execution of the project.<br> Coordinate with multi-disciplinary teams (process, mechanical, civil, electrical, instrumentation) and vendors to ensure integrated piping systems.<br> Mentor engineers, drive quality, and ensure schedule adherence for piping deliverables across project phases.</p> <h4>Key responsibilities</h4> <ul> <li>Develop and review piping design basis, piping material specifications, datasheets, and technical bid evaluations.</li> <li>Ensure compliance with applicable codes and standards and project-specific requirements.</li> <li>Develop standard deliverables, various datasheets, and requisition packages related to piping.</li> <li>Experience in non-metallic piping (GRE / HDPE) procurement and specifications.</li> <li>Provide in-depth technical support for material selection involving metallic and non-metallic piping systems.</li> <li>Participate in material selection and corrosion review sessions to ensure suitable materials for service conditions.</li> <li>Review and approve technical deliverables (isometrics, P&IDs, BOMs, MOC/Change Notes, design change requests, technical queries).</li> <li>Demonstrated knowledge of material tracking throughout the project cycle.</li> <li>Understand the MOC process and employ effective change management throughout the lifecycle of the project.</li> <li>Contribute to lessons learnt from the project.</li> <li>Report to department manager/lead engineer for the project.</li> </ul> <h4>Experience</h4> <ul> <li>12+ years of experience in concept, FEED and detail engineering and EPCM experience in the oil & gas industry.</li> <li>Experience with Middle East clients like ADNOC, BP, BOC, PDO, Total Energies & Qatar Energies is highly preferred.</li> <li>Familiarity with onshore and offshore facilities and carried out greenfield and brownfield projects.</li> <li>Experience working with multicultural project teams across various project execution centers.</li> <li>Familiarity with international piping codes and standards such as ASME B31.3, ASTM, API, and NACE MR0175/ISO 15156.</li> </ul> <h4>Qualifications</h4> <ul> <li>Master or bachelor of engineering in a related field.</li> <li>Professional membership or relevant certifications (e.g., PE/Chartered Engineer) are a plus.</li> <li>Certification related to piping design or stress analysis is advantageous.</li> </ul> <h4>Technical skills</h4> <ul> <li>Strong background in piping design, engineering, stress analysis, and support design.</li> <li>Proficiency with piping design software and calculation tools (e.g., CAESAR, AutoPIPE and 3D modeling tools).</li> <li>Technical experience to prepare manhours estimation for different types of piping activities and deliverables of different phases of the project like select phase, FEED and execution.</li> <li>Familiarity with codes, standards, regulations and practices applicable to the design and construction of various facilities.</li> <li>Hands-on knowledge of codes and standards relevant to piping.</li> <li>Experience with high-pressure piping, thermal insulation, coatings, and corrosion considerations.</li> <li>Diverse working experience in project management, conceptual, FEED and detailed design, and construction.</li> <li>Knowledge of interdisciplinary work processes, interfaces, and deliverables.</li> <li>Responsible for the training and development of engineers in his/her team.</li> <li>Adherence to company processes and procedures and handle internal and external project audits.</li> <li>Proven experience in vendor qualification, technical bid evaluation, and factory audits.</li> </ul> <h4>Soft skills</h4> <ul> <li><strong>Communication:</strong> Clear, concise communication with technical and non-technical stakeholders.</li> <li><strong>Problem solving:</strong> Proactive identification and mitigation of piping-related risks.</li> <li><strong>Project management:</strong> Planning, scheduling, risk management, and deliverable tracking.</li> <li><strong>Influence & collaboration:</strong> Effective collaboration with clients, vendors, and internal teams.</li> <li><strong>Adaptability:</strong> Comfort in dynamic project environments and changing technical requirements.</li> <li><strong>Attention to detail:</strong> Rigorous approach to reviews, calculations, and documentation.</li> <li><strong>Safety mindset:</strong> Commitment to health, safety, and environment (HSE) standards.</li> <li><strong>Critical thinking:</strong> Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems.</li> </ul></p><p></p>

<p><h4>Job description</h4> <p><strong>Position:</strong> Lead process engineer<br> <strong>Company:</strong> KBR<br> <strong>Project:</strong> Majnoon<br> <strong>Location:</strong> Basra. 28/28 rotation</p> <p>Belong, connect, grow, with KBR! The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</p> <p>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Job purpose</h4> <p>The lead process engineer will own the technical integrity and successful delivery of process engineering scope across projects at different stages (conceptual studies, front-end design (FEED), and detailed engineering) for oil and gas field developments, including upstream offshore/onshore, gas treating, and downstream processing, in greenfield and brownfield environments. This role leads a team of engineers within a multidisciplinary project team, ensuring compliance with industry standards and project specifications, driving technical excellence, and fostering the development of Iraqi national staff.</p> <h4>Job responsibilities</h4> <ul> <li>Lead the preparation and review of process simulations and optimization studies for select/appraise stage projects, and champion the development of process flow schemes with heat and mass balances, equipment sizing, layout, etc., for costing and option selection.</li> <li>Own the detailed process engineering deliverables across all design phases, including process flow diagrams, piping & instrumentation diagrams, equipment datasheets, study reports/manuals, etc., ensuring alignment with international standards and project requirements.</li> <li>Oversee the review of process design work by third parties (vendors) and other offices; champion participation in HAZIDs, HAZOPs, SIL, hazard analysis reviews, and audits; ensure timely issue resolution and closure.</li> <li>Act as the primary technical interface with clients, communicating complex concepts clearly in both written and verbal formats; manage client expectations and confirm technical commitments.</li> <li>Mentor and actively develop Iraqi national staff to fulfill process engineering roles, providing structured on-the-job training, performance feedback, and growth opportunities.</li> <li>Ensure adherence to office quality and safety systems; lead the implementation of quality assurance/quality control practices within the process discipline.</li> <li>Collaborate with other disciplines to drive on-time, efficient, and safe project delivery; lead technical risk management and issue resolution within the process scope.</li> <li>Lead the technical supervision of FEED and detailed engineering activities for offshore/onshore greenfield/brownfield projects, ensuring design integrity and constructability.</li> <li>Support procurement activities by providing authoritative technical input for equipment selection and vendor evaluation, including evaluation of bid technical clarifications.</li> <li>Participate in commissioning and start-up activities, providing seasoned technical support and facilitating smooth handover to operations.</li> </ul> <h4>Functional responsibilities</h4> <ul> <li>Maintain and further develop process engineering standards, best practices, and technical governance within the project teams.</li> <li>Lead risk assessments and develop comprehensive mitigation strategies for process-related issues; own the risk register for the process discipline.</li> <li>Ensure timely delivery of all process engineering deliverables in accordance with project schedules; manage resource planning and workload distribution within the team.</li> <li>Provide technical leadership in design reviews, technical compliance, and governance for all process workstreams.</li> <li>Support and guide procurement activities with robust technical input for equipment specifications, vendor selection, and qualification.</li> <li>Lead commissioning and start-up activities from a process perspective, delivering technical support, commissioning procedures, and start-up readiness reviews.</li> </ul> <h4>Technical skills</h4> <ul> <li>Extensive experience in FEED and detailed engineering design for offshore/onshore greenfield/brownfield projects.</li> <li>Proficiency in process simulation software (e.g., Aspen HYSYS, Flare System Analyzer, ProMax, Pipesim, Pipenet, others).</li> <li>Strong knowledge of process safety management and hazard analysis techniques.</li> <li>Familiarity with relevant industry codes and standards (e.g., API, ASME, ISO).</li> <li>Experience with process control systems and instrumentation.</li> </ul> <h4>Soft skills</h4> <ul> <li>Leadership and team management skills.</li> <li>Strong communication and interpersonal skills.</li> <li>Ability to work collaboratively in a multidisciplinary environment.</li> <li>Problem-solving mindset with a focus on innovation and efficiency.</li> <li>Adaptability to changing project requirements and priorities.</li> </ul> <h4>Qualifications</h4> <ul> <li><strong>Mandatory:</strong> Bachelor’s degree in engineering (chemical, process, or related field).</li> <li><strong>Preferred:</strong> Master’s degree in engineering (chemical, process, or related field) and/or membership of internationally accepted applicable professional institute.</li> <li>10 years of experience in process engineering within engineering contractors, with a focus on FEED and EPC design for upstream onshore/offshore greenfield/brownfield projects.</li> </ul> <h4>Work environment</h4> <p>The role will be based in Iraq, requiring collaboration with local and international teams. The work environment is dynamic and fast-paced, necessitating flexibility and a proactive approach to challenges.</p></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are looking for the right people - people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world's largest providers of products and services to the global energy industry.</p><p><b>Job Duties</b></p><p>Under broad direction from the Asset or Project Manager , the Surface Facilities Manager Senior, supports the Asset or Project Manager in managing the surface facilities activities in the asset. Handles the project management requirements for the Customer surface facilities work scope, potentially including project planning, FEED work, detailed design, construction, commissioning, start-up and/or abandonment activities. Expertise in managing design consultants to optimize the design and construction contractors to maximize productivity. Strong understanding of all aspects of risk management methodologies; including risk identification, assessment, prioritization and mitigation/control. Analyzes, plans, and tracks company resources to complete facility design and construction on time and on budget. Attends internal coordination meetings with PSLs and other Project/Asset department heads, and informs activity completion dates and issues. Coordinates environmental impact studies produced by engineering group to comply with governmental requirements. Attends internal and external meetings for work coordination. Communicates surface facility needs and plans to Customer, and obtains corresponding contractual approval. Approves final revision and Engineering and Construction Work Orders and corresponding invoices. Reviews AFE requests and submits for upper management approval. Possesses strong knowledge of all aspects of project management control systems; including project scheduling, cost estimating, change/variance orders, MoC processes, monthly reporting, etc.</p><p>Location Oils Opertion ST,N 29 Burjesia, Basra, Basrah, 61001, Iraq</p><p><br></p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><h2><br></h2><h2>Qualifications</h2><p>Requires an undergraduate degree in engineering or similar discipline, and preferably 8 years of progressive experience in planning, design, construction and project management of surface facilities in oil fields.</p><p></p></section>

<p><h4>About company</h4> <p>Belong, connect, grow, with KBR!<br> The KBR team delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.<br> KBR sustainable technology solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Key responsibilities</h4> <ul> <li>Develop civil and structural bill of material.</li> <li>Prepare layouts and detail drawings.</li> <li>Create civil grading and roadway models using Civil 3D and prepare 2D drawing packages from the design models.</li> <li>Collaborate with other disciplines and the project engineering team for structural design requirements.</li> <li>3D modeling of RCC foundations, piles, pile caps.</li> <li>Extraction of GA drawings. Development of RCC details, base plate and anchor bolts.</li> <li>3D modeling, drawing extractions and development of structural steel details, pipe racks, technological structures, shelters, grade mounted platforms, vessel mounted platforms, pipe supports, equipment foundations, roads and drains.</li> <li>Perform calculations and layouts including 2D and 3D models with adequate dimensions necessary to assist the engineering disciplines and fabrication/construction personnel including preparation of topographic layouts, earthworks/excavation drawings, boreholes locations, fencing, paved roads and drainage, underground piping and foundations, architectural and conceptual building drawings, control room layouts, substation layouts, machinery shelters, service platforms, pipe racks, pump foundations, vessel and vessel platform foundations, columns and other civil/structural drawings.</li> <li>Perform layout clash/interface checks, identify conflicts, take corrective action in coordination with other engineering discipline inputs.</li> <li>Issue engineering drawings and layouts for inter-discipline checks (IDCs), coordinate with other engineering disciplines in the integration of technical data inputs. Prepare final layouts and drawings integrating inputs provided by other engineering disciplines. Consult and make recommendations to engineers on feasibility of design plans and layouts.</li> <li>Estimation and preparation of material take-offs (MTOs), review vendor drawings, ensure vendor specifications are in full compliance with contract/project requirements.</li> <li>Prepare red-line markups, resolution of site queries from construction and fabrication shop queries / TQs. Preparation of detail sketches to support resolution of site and fabrication queries. Updating of 3D model.</li> <li>Prepare “as-built” drawings following completion of construction activities.</li> </ul> <h4>Essential qualifications and skills</h4> <ul> <li>10 years’ experience.</li> <li>Must have proficiency in AutoCAD and Navisworks software.</li> <li>Experience supervising small teams.</li> </ul></p><p></p>

<p><h4>Job description - Construction lead – Civil</h4> <p>KBR is seeking an experienced civil lead to oversee and drive the safe, compliant, and technically robust execution of civil construction activities across major oil & gas facilities in Iraq. This senior role requires strong leadership, advanced technical capability, and proven experience managing multi-discipline construction interfaces in live operational environments.</p> <h4>Accountabilities / expectations</h4> <ul> <li>Single point accountability (SPA) for all civil construction activities within the assigned plant area, ensuring safe execution, technical compliance, and alignment with project delivery requirements.</li> <li>Lead and enforce site safety rules, SIMOPS controls, and construction risk mitigation strategies across all civil scopes, including earthworks, foundations, structural concrete, steel structures, roads, drainage, and underground utilities.</li> <li>Own the technical scope, ensuring full understanding of design intent, construction interfaces, tie-ins, and operational constraints. Provide clarity to teams on specifications, IFC drawings, standards, and engineering deliverables.</li> <li>Manage multi-discipline interfaces, coordinating civil works with mechanical, piping, electrical, instrumentation, telecom, and commissioning teams to ensure seamless execution and minimal rework.</li> <li>Lead contractor performance, ensuring adherence to quality, schedule, safety, and technical requirements. Provide direction, resolve conflicts, and maintain disciplined control of workforce activities.</li> <li>Conduct detailed site safety audits, including verification of barricading, excavation safety, lifting operations, scaffolding compliance, and workforce competency.</li> <li>Ensure full readiness of work fronts, including approved IFC drawings and design clarifications, completed surveys, geotechnical checks, and layout verification; material availability and correct storage; verified underground utility mapping and clash checks; valid permits, JSA, and risk assessments.</li> <li>Drive technical assurance, raising and tracking technical queries (TQs), site instructions (SIs), and field change requests (FCRs) to resolve design gaps or operational constraints.</li> <li>Lead construction work pack reviews, ensuring completeness of civil method statements, lifting plans, excavation plans, concrete pour plans, and associated safety certificates.</li> <li>Minimize non-productive time (NPT) through proactive planning, early identification of constraints, and ensuring vendor mobilization is optimized and technically justified.</li> <li>Oversee quality compliance, including concrete batching and testing, rebar installation and inspection, formwork and shuttering checks, soil compaction testing, structural steel alignment and bolt torquing, civil finishing and coating standards.</li> <li>Lead joint walkdowns with construction, QA/QC, commissioning, and operations for system handover, ensuring punch lists are accurate, categorized, and closed efficiently.</li> <li>Support commissioning by ensuring civil systems (e.g., foundations, supports, trenches, access platforms, roads) are fully complete, safe, and ready for energization or mechanical completion.</li> <li>Provide leadership and mentoring to civil supervisors, foremen, and junior engineers, ensuring strong team capability and continuous improvement.</li> </ul> <h4>Education</h4> <p>Bachelor’s degree or diploma in civil engineering or related discipline.</p> <h4>Experience & skill set</h4> <ul> <li>Minimum 8 years experience in civil construction within oil & gas, petrochemical, or heavy industrial projects.</li> <li>Minimum 5 years experience in a lead or senior supervisory role managing multi-discipline construction teams.</li> <li>Strong technical knowledge of:</li> <ul> <li>Civil/structural design and construction</li> <li>Geotechnical requirements</li> <li>Concrete technology and QA/QC</li> <li>Steel structures and foundations</li> <li>Roads, drainage, and underground utilities</li> <li>Excavation safety and SIMOPS</li> </ul> <li>Proven ability to interpret engineering drawings, specifications, and international standards.</li> <li>Strong leadership, communication, and conflict-resolution skills.</li> </ul></p><p></p>

<p>Ability to prepare Single Line Diagrams (SLD), lighting layouts, power distribution, fire alarm, ELV, grounding, and cable routing drawings.</p><p>Minimum 10 years of experience as an Electrical Draftsman on building, commercial, industrial, or high-rise construction projects. Proficiency in AutoCAD for electrical drafting. Revit MEP experience is preferred. Strong experience in preparing Shop Drawings, As-Built Drawings, and design revisions. Ability to prepare construction drawings in accordance with site requirements. Experience coordinating with consultants, design offices, and site engineering teams. Good command of English, both written and spoken. International project experience is preferred. Strong attention to detail and excellent teamwork and communication skills.</p><p><strong>Desired Candidate Profile</strong></p><p>Diploma or Bachelor s degree in Electrical Engineering or Electrical/Electronic Engineering.</p>

<p><h4>About company</h4> <p>Belong, connect, grow, with KBR! The KBR team delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals. KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Job purpose</h4> <p>The site planning engineer is responsible for developing and managing site planning activities to ensure that the project is completed on time and within budget. This role involves coordinating with multidisciplinary teams during the FEED and design phases, focusing on onshore and brownfield projects. The site planning engineer will play a crucial role in implementing effective planning strategies, ensuring resource optimization, and mitigating risks associated with site operations.</p> <h4>Job responsibilities</h4> <li>Develop and maintain detailed project schedules using suitable project management software.</li> <li>Collaborate with engineering, construction, and procurement teams to assess project requirements and ensure alignment with project scope.</li> <li>Perform risk analysis and assessment to identify potential issues in project execution and propose corrective actions.</li> <li>Monitor project progress and report regularly to senior management and project stakeholders.</li> <li>Facilitate site assessments and prepare relevant reports to support decision-making processes.</li> <li>Ensure compliance with safety regulations and promote a culture of safety on-site.</li> <li>Maintain effective communication with all project stakeholders and foster strong working relationships.</li> <li>Participate in project meetings, providing insights on planning and scheduling aspects.</li> <li>Contribute to continuous improvement efforts by proposing innovative planning solutions and methodologies.</li> <li>Assist in the development of progress reports and other documentation as required by project management.</li> <h4>Functional responsibilities</h4> <li>Implementing site logistics and resource plans, considering workforce and construction equipment requirements.</li> <li>Coordinating with the engineering team to integrate design changes into the project schedule effectively.</li> <li>Evaluating and monitoring subcontractor performance in relation to planning and execution benchmarks.</li> <li>Preparing and analyzing variance reports to identify schedule delays or inefficiencies.</li> <h4>Technical skills</h4> <li>Proficient in project scheduling software (e.g., Primavera P6, MS Project).</li> <li>Strong understanding of project management principles, methodologies, and tools.</li> <li>Familiarity with FEED (Front-End Engineering Design) processes and brownfield project challenges.</li> <li>Ability to read and interpret engineering drawings and specifications.</li> <li>Competent in risk management and mitigation strategies.</li> <h4>Soft skills</h4> <li>Excellent communication and interpersonal skills to work collaboratively with diverse teams.</li> <li>Strong analytical and problem-solving abilities.</li> <li>Proactive attitude and ability to work under tight deadlines and pressure.</li> <li>Strong organizational skills and attention to detail.</li> <h4>Qualification</h4> <p>Must have 10 years of experience in site planning and project controls.</p> <p><strong>Mandatory:</strong></p> <li>Bachelor’s degree in engineering in related field from reputed university.</li> <p><strong>Good to have:</strong></p> <li>Master’s degree in engineering in related field from reputed university.</li> <h4>Work environment</h4> <li>The role will primarily be based on-site in Iraq, requiring a commitment to a dynamic and fast-paced work environment. The position may involve working in varying weather conditions and adhering to local health and safety regulations.</li> <li>Flexibility in working hours may be required to accommodate project demands and deadlines.</li></p><p></p>

<p><h4>About company</h4> <p>Belong, connect, grow, with KBR!<br> The KBR team delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.<br> KBR sustainable technology solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Job purpose</h4> <p>The reservoir engineer is part of the well reservoir facilities management team in the petroleum engineering department. The primary job purpose is to ensure asset value maximization, development planning and optimization decisions. The incumbent also needs to ensure the optimum recovery of remaining reserves and production within optimal operating envelope.</p> <h4>Duties and responsibilities</h4> <ul> <li>Overview and participate in in-house reservoir studies and provide technical consultation support to internal/external reservoir studies (validation, assess quality of deliverables).</li> <li>Check with the study team on the dynamic simulation model for short, medium and long term production forecasts and design a reservoir management strategy.</li> <li>Support the study team to update the reservoir simulation model for field development plans, depletion planning, forecast and reserves assessment.</li> <li>Daily reservoir production and performance monitoring in order to meet production criteria while adhering to prudent reservoir management plan.</li> <li>Formulate, review and enhance reservoir management and surveillance plans.</li> <li>Evaluate opportunities to improve reservoir ultimate recovery and production targets.</li> <li>Provide support to other groups for well intervention, proposal, data acquisition and reservoir evaluation.</li> <li>Provide technical advice and support on infill, appraisal and development drilling.</li> <li>Get production forecasts from the study team (simulation models and/or other acceptable reservoir engineering techniques).</li> <li>Conduct well and reservoir review, present recommendation to team and stakeholders as required.</li> <li>Ensure a comprehensive range in subsurface uncertainties understanding has been thoroughly evaluated and passed on to develop production forecast, input, assumptions for WPB, STPF/LTPF etc.</li> <li>Ensure integration and consistency between engineering and geological interpretations by close collaboration with the study team and other professionals (production technologist, petrophysicists, geologists, geophysicists, operations and facilities engineers).</li> <li>Evaluate new technologies and applications to the reservoirs to improve ultimate recovery and encourage knowledge sharing amongst peers and colleagues.</li> <li>Mentoring, training, and enhancing capability of less experienced colleagues and junior staff in all aspects of surveillance and reservoir management.</li> </ul> <h4>Qualifications</h4> <p>Degree in petroleum engineering. In-depth knowledge of reservoir management. Experience and good technical knowledge and understanding of reservoir drive mechanisms, stimulation design, well test analysis, decline curve analysis, production forecast and artificial lifts applications. Previously working in a multi-cultural and multi-national team. Knowledge of well completion, intervention, drilling and workover procedures and regulations. Oil and gas wells design and integrity monitoring and management from conceptual and construction until abandonment. Experience in reservoir engineering software: PI, PVTSim, Kappa’s Sapphire and OFM.</p> <h4>Experience</h4> <p>Minimum 10 - 15 years’ experience with an operator with in-depth technical knowledge and capability in reservoir engineering and reservoir studies (water flooding, gas injection etc.). Experience in both clastic and carbonate reservoirs development and recovery strategies. Previously working in a multi-cultural and multi-national team, international experience.</p> <h4>Language proficiency, computer and software skills</h4> <p>Must be able to speak upper intermediate and above English. Arabic is an advantage. Knowledge of Eclipse (basic), Petrel RE, IPSM, OFM. Experience in other petroleum engineering standard software (intermediate): EC, PVTSim, Kappa’s Sapphire or other software is an advantage.</p> <h4>Skills</h4> <ul> <li>Good communication and analytical skills are essential.</li> <li>Eagerness to learn and develop own skills.</li> <li>Strong leadership skills, ability to delegate, and work with minimum supervision.</li> <li>Must have a HSSE driven mindset.</li> <li>The ability to work with people from different cultural backgrounds will be essential.</li> <li>The position will involve working with government, vendors or partner representatives.</li> <li>Experience and good understanding of reservoir development, simulation, stimulation design, well test analysis, decline curve analysis, production forecast and artificial lifts.</li> <li>Knowledge of well completion, intervention and workover procedures and regulations.</li> <li>Experience and knowledge of oil and gas wells integrity monitoring and management from construction until abandonment.</li> <li>Experience in supervising operations of production enhancements, well completion, intervention and workover procedures and regulations.</li> <li>Good diagnostic skills are required to troubleshoot problems.</li> <li>Must be able to communicate at a technical level with various stakeholders including:<br>     - Production technologists/planners: well performance, analysis and well integrity.<br>     - Petroleum engineers: production performance, production forecasts, development planning.<br>     - Finance/commercial department: reporting and forecasting of produced and export volumes.<br>     - Operations & maintenance: system performance and optimization opportunities.<br>     - Metering: metering and mismeasurement issues.</li> </ul></p><p></p>

<p>Performs preventive/predictive maintenance and repair of a variety of mechanical equipment relative to their assigned location. Assists in supervising other technicians and prioritizes and/or assigns work when needed. Possesses advanced diagnostic/troubleshooting knowledge and skills. Performs advanced function testing to verify equipment readiness after maintenance. Must be proficient in understanding/interpreting mechanical schematics/drawings/prints. Ability to identify correct parts and locate them in a system search to enable accurate procurement of spares. Ensures adherence, accurate input, and maintenance of data into Halliburton's system of record. This role is responsible for following specific and detailed work processes within the Halliburton Management System (HMS) during daily job activities. Responsible for mentoring junior technicians. Responsible for ensuring duties are performed in a safe, efficient, and effective manner. Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations. Consequences of error are easily measured and can be confined.</p><p>Additional Role Responsibilities: (1). Provide the professional technical Support for static equipment and facilities operation and maintenance services; (2). Conducts detailed technical evaluations to address issues with equipment and system design, operation and maintenance; (3). Provides pertinent engineering expertise to Root Cause Failure Analysis; (4).Review and approval of mechanical data sheets of static equipment (5).Reviews affiliate, project and contractor deliverables as requested to ensure compliance with project specifications, Design Practices, Static Equipment Toolkit guidance, and best practices. Documents to be reviewed may include Piping &amp; Instrument Diagrams, equipment arrangements, equipment specifications, data sheets, vendor proposals, and technical studies; (6).Participates in design reviews, risk assessments, HAZOPs, vendor qualification, and vendor bid evaluations as requested; (7).Supports functional initiatives and maintains discipline documentation pertinent to Upstream Facilities; (8).Provides technical mentorship to less experienced engineers with emphasis on areas of identified skill gaps; (9).Proactively and continuously grows disciplines technical expertise in pertinent technologies. (10).Maintains current knowledge (e.g. through participation in industry conferences / forums).</p><p><strong>Desired Candidate Profile</strong></p><p>A high school diploma or equivalent and 5 years of experience in related mechanical fields are required. A technical school certification is preferred. Preferred Experience: Minimum of 10-years relevant experience in their discipline or in an operations environment within the oil &amp; gas industry.</p>

<p>Under general supervision: Responsible for HAL contractual operations at the well site. Understands objectives of the well services operation and takes actions required to accomplish the objective. Responsible for reporting and protects the health and safety of employees, contractors, and the general public from harm resulting from operations. Protects the environment from damage resulting from operations. Coordinates work of product services lines and 3rd party subcontractors to meet engineered well design. Supervises day-to-day field operations at the well site. Matrix manager for HSE and logistics personnel on location. Maintains a high profile and leadership in HSE by active participation in HSE audits, inspections and reviews in accordance with the HSE Plan. Participates in and facilitate incident and near miss investigations, Validation of closed corrective actions and audit open items. Responsible for move-in and rig up, rig down and move-out of equipment. Directs well operations processes. Manages field operations to accomplish specified well services objectives within agreed-on time and cost objectives. Prepares a documented 7 day look ahead for equipment, materials, and personnel for the well operations every day.</p><p>Additional Role Responsibilities: (1).In charge of management all the service order related wells; (2).Contact with discipline engineer of Company regarding to the technical issue of Service order; (3).Establish a working relationship and lines of communication with the supervisor to implement overall construction configuration management; (4).Responsible for quantity take-off, control, tracking, reporting and forecasting; (5).Specify the criteria for construction of facilities as required; (6).Review material receiving reports and warehousing to assure delivery of correct materials; (7).Coordinate and monitor the interfaces for data exchange to support the construction plan and the project controls program requirements at the jobsite; (8).Develop and manage the construction quality program; (9).Review Sub-Contractor's proposal for service order; (10).Coordinate with Subcontractors to plan/support construction schedules; (11).Plan and recommend procedures to be implemented by Subcontractor to ensure construction operations are within requirements of engineering design and specifications; (12).Coordinate subcontract activities to ensure materials, equipment and quality comply with design plans and specifications; (13).Preparation of all required related to QA/QC documentation; (14).Management and coordinate of local employee.</p><p><strong>Desired Candidate Profile</strong></p><p>Qualifications Position requires current IADC or IWCF supervisory well control certification. Requires a high school diploma and a minimum of five years of rig site experience with at least three years of operational management experience. Undergraduate degree is preferred.</p><p>Preferred Experience: Minimum of 10-years relevant experience in their discipline or in an operations environment within the oil &amp; gas industry.</p>

<p>Under general supervision: Responsible for HAL contractual operations at the well site. Understands objectives of the well services operation and takes actions required to accomplish the objective. Responsible for reporting and protects the health and safety of employees, contractors, and the general public from harm resulting from operations. Protects the environment from damage resulting from operations. Coordinates work of product services lines and 3rd party subcontractors to meet engineered well design. Supervises day-to-day field operations at the well site. Matrix manager for HSE and logistics personnel on location. Maintains a high profile and leadership in HSE by active participation in HSE audits, inspections and reviews in accordance with the HSE Plan. Participates in and facilitate incident and near miss investigations, Validation of closed corrective actions and audit open items. Responsible for move-in and rig up, rig down and move-out of equipment. Directs well operations processes. Manages field operations to accomplish specified well services objectives within agreed-on time and cost objectives. Prepares a documented 7 day look ahead for equipment, materials, and personnel for the well operations every day.</p><p>Additional Role Responsibilities: (1).In charge of management all the service order related wells; (2).Contact with discipline engineer of Company regarding to the technical issue of Service order; (3).Establish a working relationship and lines of communication with the supervisor to implement overall construction configuration management; (4).Responsible for quantity take-off, control, tracking, reporting and forecasting; (5).Specify the criteria for construction of facilities as required; (6).Review material receiving reports and warehousing to assure delivery of correct materials; (7).Coordinate and monitor the interfaces for data exchange to support the construction plan and the project controls program requirements at the jobsite; (8).Develop and manage the construction quality program; (9).Review Sub-Contractor s proposal for service order; (10).Coordinate with Subcontractors to plan/support construction schedules; (11).Plan and recommend procedures to be implemented by Subcontractor to ensure construction operations are within requirements of engineering design and specifications; (12).Coordinate subcontract activities to ensure materials, equipment and quality comply with design plans and specifications; (13).Preparation of all required related to QA/QC documentation; (14).Management and coordinate of local employee.</p><p><strong>Desired Candidate Profile</strong></p><p>Position requires current IADC or IWCF supervisory well control certification. Requires a high school diploma and a minimum of five years of rig site experience with at least three years of operational management experience. Undergraduate degree is preferred.</p><p>Preferred Experience: Minimum of 10-years relevant experience in their discipline or in an operations environment within the oil &amp; gas industry.</p>

<p><h4>Belong, connect, grow, with KBR!</h4> <p>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</p> <p>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Job purpose</h4> <p>Responsible for the process design, operation and implementation, improve industrial processes in order to maintain efficiency, reduce cost, improve sustainability and maximize profitability.</p> <h4>Duties and responsibilities</h4> <ul> <li>Develop, configure and optimize industrial processes from inception through to start up and certification</li> <li>Assess processes, take measurements and interpret data</li> <li>Design, run, test and upgrade systems and processes</li> <li>Develop best practices, routines and innovative solutions to improve production rates and quality of output</li> <li>Perform process simulations</li> <li>Manage cost and time constraints</li> <li>Provide technical assurance to unit operations and ensure production plan delivery</li> <li>Provide process documentation and operating instructions</li> <li>Participate timely completion of Management of Change work (MOCs, medium to long term)</li> <li>Utilise and perform maintenance of standardized monitoring tools to perform unit monitoring (spreadsheets, or data historians like PI Process Book, etc.)</li> <li>Participate in special projects as required</li> <li>Support senior operation support engineer as required</li> <li>Consult technical specialist teams as required</li> <li>Facilitate and participate in HAZOP studies, and other safeguarding reviews</li> <li>Utilize structured problem-solving techniques as appropriate: option analysis, RCA, etc.</li> <li>Ensure compliance with engineering related regulations and Shell standards</li> <li>Promote and support compliance to operating integrity</li> <li>Provide input into and support for the integrated activity plan</li> <li>Support operations reliability improvement process to ensure timely and appropriate corrective action has been taken to ensure repeat failures are eliminated</li> </ul> <h4>Qualification & training requirements</h4> <p>BSc. Degree in chemical or petrochemical engineering.</p> <h4>Experience</h4> <ul> <li>A minimum of 5 years of proven working experience in process engineering</li> <li>Experience in process simulations, with working knowledge of process engineering software packages and knowledge of process related standards</li> <li>Experience in different process industries, either upstream, downstream, gas plants or with engineering and construction major contractors</li> </ul> <h4>Language proficiency, computer and software skills</h4> <ul> <li>Advanced knowledge of MS Office</li> <li>Honeywell UniSim - Intermediate</li> <li>PipeSim - Intermediate</li> <li>Instrument Calculation Tool - Intermediate</li> <li>PI Process Book - Intermediate</li> <li>English - Speaking, writing and reading: Intermediate</li> </ul> <h4>Skills</h4> <ul> <li>Reading and updating process documents</li> <li>Presentation skills</li> <li>Problem solving</li> <li>Report writing</li> <li>Communication skills</li> </ul></p><p></p>

<p><h4>Belong, connect, grow, with KBR!</h4> <p>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</p> <p>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Job description: Superintendent power</h4> <p><strong>Company:</strong> KBR Iraq<br> <strong>Location:</strong> Majnoon Oil Field, Iraq<br> <strong>Rotation:</strong> 28/28<br> <strong>Nationality:</strong> Iraqi nationals preferred</p> <p>The Superintendent Power is responsible for leading, supervising, and coordinating all electrical power generation, distribution, and maintenance activities across the Majnoon Oil Field. This role ensures safe, reliable, and compliant operation of electrical systems supporting production facilities, camps, utilities, and critical infrastructure. Superintendent provides technical leadership, oversees site execution, and ensures alignment with KBR standards and client requirements.</p> <h4>Accountability / expectations</h4> <ul> <li>Oversee daily operation, maintenance, and troubleshooting of power generation units, HV/LV distribution networks, switchgear, transformers, MCCs, and protection systems.</li> <li>Ensure electrical systems operate within design parameters, safety limits, and reliability targets.</li> <li>Lead fault investigations, root-cause analysis, and corrective action implementation.</li> <li>Manage preventive and predictive maintenance programs to minimize downtime and extend asset life.</li> <li>Provide expert guidance on electrical engineering standards, power system design, and safe work practices.</li> <li>Ensure full compliance with KBR HSSE, electrical regulations, and international codes.</li> <li>Review and approve electrical work permits, isolation plans, energization procedures, and switching operations.</li> <li>Maintain accurate documentation, single line diagrams, load studies, and equipment records.</li> <li>Coordinate electrical construction, installation, commissioning, and upgrade activities across the field.</li> <li>Interface with engineering, construction, commissioning, and operations teams to ensure technical alignment.</li> <li>Verify contractor performance, quality of workmanship, and adherence to specifications.</li> <li>Support integration of new facilities into the existing power network.</li> <li>Supervise electrical supervisors, technicians, and contractors across multiple site locations.</li> <li>Ensure competency development, training, and mentoring of Iraqi national workforce.</li> <li>Promote a strong safety culture and enforce compliance with electrical safety rules and LOTO procedures.</li> <li>Liaise with Operations, Maintenance, HSSE, and Planning departments to ensure seamless power support for field activities.</li> <li>Monitor power system performance, load demand, and energy efficiency opportunities.</li> <li>Prepare daily, weekly, and monthly reports on electrical system status, outages, and maintenance KPIs.</li> </ul> <h4>Education</h4> <p>Bachelor’s degree in Electrical Engineering</p> <h4>Experience</h4> <ul> <li>10+ years experience in electrical power systems within oil & gas, petrochemical, or heavy industrial environments.</li> <li>Strong knowledge of HV/LV systems, generators, protection relays, SCADA, and industrial electrical equipment.</li> <li>Proven experience in site-based leadership roles (Superintendent, Supervisor, Lead Engineer).</li> <li>Demonstrated ability to manage multi-disciplinary teams in remote field environments.</li> </ul></p><p></p>

<p><h4>Belong, connect, grow with KBR!</h4> <p>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</p> <p>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Job description - Construction supervisor – civil</h4> <p><strong>Company:</strong> KBR Iraq<br> <strong>Iraqi nationals preferred</strong></p> <p>KBR is looking for a civil construction supervisor for 28/28 rotation to be based in Iraq.</p> <h4>Accountabilities and expectations:</h4> <ul> <li>Single point responsible for the safe execution of the defined work scope in the plant area.</li> <li>Understand and be responsible for managing the site safety rules for the defined plant area.</li> <li>Understand and be responsible for the scope to be executed including all the interfaces and safety requirements.</li> <li>The work scope can be a complete new multi-discipline area or a single discipline scope passing through numerous operational areas. Clear communication and understanding between operations and the construction team is paramount. The scope is managed, controlled and risk assessed by the permit to work.</li> <li>Can be responsible for managing a dedicated contractor workforce in the area or be part of an integrated team managing a combined resourced construction/commissioning team.</li> <li>Participate in site safety audits regarding work execution, permits, work site standards and workforce knowledge of the work.</li> <li>Ensure a fully briefed workforce and operational staff including valid permits and risk assessments.</li> <li>Ensure accurate progress reporting of physical scope completion not based on man-hour estimate.</li> <li>Ensure raising technical queries associated with site design/operational changes.</li> <li>Ensure planning mobilization of vendors to ensure minimal non-productive time for these expensive personnel.</li> <li>Responsible for minimizing non-productive time of work execution by ensuring scope preparation is completed before mobilization of main workforce, material is on site, design scopes are approved and understood, surveys have been completed to confirm proposed execution is doable.</li> <li>Timely approval of construction work packs and associated safety certificates as authorized engineer.</li> <li>Participate in joint walk downs of systems for handover to commissioning and operations.</li> <li>Support the commissioning department for functional commissioning.</li> <li>Ensure all action items as stipulated by interface and SIMOPS memoranda of understanding with external entities and internal disciplines.</li> </ul> <h4>Education</h4> <p>Bachelor's or diploma degree, i.e. civil</p> <h4>Experience and skill set</h4> <ul> <li>Minimum 5 years’ experience in oil and gas related projects</li> <li>Minimum 3 years’ experience in oil and gas project delivery in a multi-discipline workforce</li> <li>Strong leadership and team building skills</li> <li>Supervisory experience</li> <li>Fluent English skills</li> </ul></p><p></p>

<p><h4>Job description - Construction supervisor \u2013 civil<\/h4>\n<p><strong>Company:<\/strong> KBR Iraq<br>\nIraqi nationals preferred<\/p>\n<p>KBR is looking for a civil construction supervisor for 28\/28 rotation to be based in Iraq.<\/p>\n<p>\"Belong, connect, grow, with KBR!<br>\nThe KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.<br>\nKBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.\"<\/p>\n<h4>Accountabilities \/ expectations:<\/h4>\n<ul>\n<li>Single point responsible for the safe execution of the defined work scope in the plant area.<\/li>\n<li>Understand and be responsible for managing the site safety rules for the defined plant area.<\/li>\n<li>Will understand and be responsible for the scope to be executed including all the interfaces and safety requirements.<\/li>\n<li>The work scope can be a complete new multi-discipline area or a single discipline scope passing through numerous operational areas. Clear communication and understanding between operations and the construction team is paramount. The scope is managed, controlled and risk assessed by the permit to work.<\/li>\n<li>Can be responsible for managing a dedicated contractor workforce in the area or be part of an integrated team managing a combined resourced construction\/commissioning team.<\/li>\n<li>Participate in site safety audits regarding work execution, permits, work site standards and workforce knowledge of the work.<\/li>\n<li>Ensure a fully briefed workforce and operational staff including valid permits and risk assessments.<\/li>\n<li>Ensure accurate progress reporting of physical scope completion not based on man-hour estimate.<\/li>\n<li>Ensure raising technical queries associated with site design\/operational changes.<\/li>\n<li>Ensure planning mobilization of vendors to ensure minimal non-productive time (NPT) for these expensive personnel.<\/li>\n<li>Responsible for minimizing NPT of work execution by ensuring scope preparation is completed before mobilization of main workforce, material is on site, design scopes are approved and understood on site, surveys have been completed to confirm proposed execution is doable.<\/li>\n<li>Timely approval of construction work packs and associated safety certificates as authorized engineer (AE).<\/li>\n<li>Participate in joint walk downs of systems for handover to commissioning and operations.<\/li>\n<li>Support to commissioning department for functional commissioning.<\/li>\n<li>Ensure all action items as stipulated by interface and SIMOPs memorandums of understanding (MOUs) with external entities and internal disciplines.<\/li>\n<\/ul>\n<h4>Education<\/h4>\n<p>Bachelor\u2019s or diploma degree, i.e. civil<\/p>\n<h4>Experience and skill set<\/h4>\n<ul>\n<li>Minimum 5 years\u2019 experience in oil and gas related projects<\/li>\n<li>Minimum 3 years\u2019 experience in oil and gas project delivery in a multidiscipline workforce<\/li>\n<li>Strong leadership and team-building skills<\/li>\n<li>Supervisory experience<\/li>\n<li>Fluent English skills<\/li>\n<\/ul><\/p><p><\/p>