Automotive Engineer Jobs in Iraq

<p><h4>E&I Engineer</h4> <p>KBR Sustainable Technology Solutions (STS) provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design capabilities, and smart solutions to optimize planned and operating assets.</p> <p>Responsible for start-up and plant operations activities including equipment and system checkout, inspection for proper installation, review for correct design, and calculation of expected system and equipment operating parameters under temporary start-up conditions. Coordinates start-up operations, including the direction of craft, and all other start-up activities such as flushing, chemical cleaning, and initial equipment and system operation. Coordinates performance tests and calculates test results and heat balances. Performs calculations required to properly evaluate design changes, provides engineering reports for the engineering department to assist in design change preparation. Works with client at the site.</p> <p>Under general supervision, performs all conventional aspects of the functional area subject matter. Devises new approaches to problems encountered. Plans, schedules, and conducts work requiring judgment in the independent evaluation, selection, and adaptation of engineering techniques, procedures, and criteria. Performs work which involves conventional engineering practice but may include a variety of complex features such as conflicting design requirements, unsuitability of conventional materials, and difficult coordination requirements. Provides technical guidance to designers and less experienced engineers.</p> <p>Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability, or operations. Skills are typically acquired through an undergraduate degree in engineering and a minimum of 10 years related experience, with average experience ranging from 10-15 years.</p></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Job Title: Control System Specialist Engineer<br> Location: Basra, Iraq<br> Duration: 12 months with possible extension.<br> Renumeration: Competitive day rate + Flight + Accommodation<br> 28x28 Rotation<br> <br> Department: This role will be reporting into the Maintenance &amp; Engineering team.<br> <br> The control systems engineer shall report to Instrument &amp; Control Team Lead and will be an integral member of a multi-discipline Engineering Department.<br> &nbsp;Responsibilities shall include:<ul><li>Provide technical control and safety system engineering support to client departments in the execution of brownfield and greenfield development projects, construction, operations and maintenance groups.</li><li>Participate in conceptual, basic, and detailed design activities.</li><li>Provide assurance on engineering compliance against pertinent standards, specifications, codes and regulations. Ensure that non-conformities and deviations are identified, risk assessed and mitigated.</li><li>Provide response to engineering and site queries in line with client specifications and best engineering practices.</li><li>Provide technical input to client management of change process. Carry out site surveys. Produce design and instrument, control and safety system work pack deliverables. Contents to include scopes of work, design/construction drawings, design calculations, system architecture, network configuration, control narrative, software design specification, HMI specification, alarm configuration, system I/O allocation, MTOs, task hazard assessments.</li><li>Provide support to develop and execute strategies to upgrade and expand existing control /safety systems.&nbsp;</li><li>Review and approve third-party engineering deliverables.</li><li>Produce material requisitions, technical bid evaluations, interfacing with vendors via procurement department</li><li>Provide support to activity planning and progress reporting.</li><li>Liaise and work closely with client instrument technical authority for guidance as necessary</li><li>Attend system testing, FAT, SAT and conduct technical audit/verification</li></ul><br> <br> Qualification:<ul><li>Bachelor’s degree in Instrumentation/Control /Electronics engineering</li><li>15+ years relevant experience in control and safety system engineering, including the design and operation of processing systems in the oil and gas industry.</li><li>Functonal safety certified from TUV/Exida or similar organization.</li><li>Experience in onshore operations, emerging areas / multicultural environments. Relevant experience in successive roles includes problem analysis, solution proposal, related working procedure draft and implementation.</li><li>Experience of engineering role in detailed engineering design, procurement, construction and commissioning of PLC, DCS, ESD, FGS, RTU, SCADA, HMI and Historian.</li><li>Sound knowledge on system topology and control networks RS232/485/422, Modbus, Ethernet, TCP/IP, SafetyNet, Control Net, DH+ etc and network security.</li><li>Experience on digital/smart oil field instrumentation and network.</li><li>Hands on experience on Emerson Delta-V ICSS and Alen Bradley Control logix.</li><li>Candidate to demonstrate familiarity with all relevant industry codes, standards, and practices (IEC, IEEE, ISA, API, ISO), for instrumentation &amp; control systems.</li><li>Candidate to demonstrate good presentation and effective interdisciplinary communication skills, capability of communication with all levels, manages with different cultural background.</li></ul><br> If you would like to know more about this opportunity, please send your most updated CV to erica.balde@nesfircroft.com&nbsp;<br>With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil &amp; Gas, Power &amp; Renewables, Chemicals, Construction &amp; Infrastructure, Life Sciences, Mining and&nbsp;Manufacturing&nbsp;sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients. <br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Job Title: Lead Process Safety Engineer<br> Department / Function: Maintenance &amp; Engineering <br> Duration: 12 months renewable<br> Location: Basra, Iraq<br> Rotation: 28/28<br><strong>Role Synopsis</strong><br>An outstanding opportunity for a highly motivated individual to join an exciting division. This role will have the opportunity to contribute in a positive way to help build a sustainable future for the client and the people of Iraq. The Lead Process Safety Engineer (LPSE) will be a member of the Central Engineering Team reporting into the Process Safety Team Lead (PSTL). The LPSE will provide deep process safety engineering expertise and judgment in service of the operation and development of the Rumaila field. The LPSE shall work closely with Projects and Area Operations to ensure efficient handover of all issues that require process safety engineering input to resolve.<br>The incumbent is expected to assist the PSTL with the Process Safety programme for the Rumaila Operation and help champion all aspects of good Process Safety management in an aging oilfield.<br> <br><strong>Key Accountabilities</strong><br><ul><li>Promote a culture of process safety and continuous improvement.</li><li>Assist the PSTL with the nationalisation program and support professional development of Iraqi nationals.</li><li>Provides process safety engineering expertise to support the wider organisation through engineering guidance and by performing and reviewing complex, or non-routine process safety engineering calculations, risk assessment and analyses.</li><li>Provides process safety engineering expertise to EQs, MoCs and Projects including coordination with Production / Operations/ Maintenance staff to identify / prioritise engineering activities.</li><li>Provide assurance on process safety engineering compliance with applicable Standards, Specifications, Codes and Regulations within organisation and 3rd Ensure that non-conformities and temporary deviations are identified and assessed.</li><li>Perform / review risk and consequence analysis and where required coach others on the use of risk analysis and consequence modelling techniques such as QRA, FERA, Explosion Modelling, Fire and Gas Mapping using industry standard software such as PHAST</li><li>Where required facilitate and participate in process safety design reviews and safety studies such as HAZOP and HAZID/ENVID.</li><li>Working knowledge of functional safety concepts and the application of industry standards e.g. IEC61508/11, in design and operational phases.</li><li>Ensures critical process safety documentation and information, e.g. Bowtie diagrams are kept up to date.</li><li>Assists with the reviews of the impact of emerging risks.</li><li>Communicates process safety engineering lessons learned and encourages a culture of sharing experience and continuous improvement.</li><li>Where required, provides process safety engineering expertise in performing incident investigations and defect investigations.</li><li>Provides process safety engineering expertise to delivery of regional actions. Leads on resolution of complex, multi-discipline technical issues where the dominant component is process safety related.</li></ul><strong>Essential Education</strong><br>Degree / diploma qualified engineer or equivalent work experience. BSc, BEng or MEng (UK), BSc (US), or international equivalent in Chemical / Process Engineering or other relevant engineering subject.<br>Professional accreditation, such as Professional Engineer or Chartered Engineer.<br><strong>Essential experience and job requirements</strong><br>At least 15 years industry experience with 5 years in international multicultural operational roles across the full value chain of hydrocarbon and water production facilities. Experience in brownfield operations process safety engineering, reliability, modifications and strong technical leadership with influencing capabilities. <br>An ability to work effectively with other disciplines / teams to understand and assess complex issues and develop pragmatic solutions.<br>Proven ability in practical application of engineering standards and practices for process safety engineering. Candidate to demonstrate familiarity with all relevant industry process safety engineering codes, standards, and practices (API, ASME, ISO etc.), and relevant experience with key process safety engineering tools such as Phast, Bowtie XP, Aspen HYSYS &amp; Flare System Analyser.<br><strong>Desirable criteria and qualifications</strong><br><ul><li>Key skills include communication, interpersonal relationships, facilitation, influencing, and negotiating across department.</li><li>Ability to develop others and foster diverse relationships in a multicultural environment.</li><li>Ability to identify correct priorities of maintenance and engineering support activities.</li><li>Ability to Identify and assess process safety hazards.</li><li>Ability to speak Arabic would be beneficial but not essential.</li></ul><strong>Other Requirements</strong><br><ul><li>A passion and relentless drive for continuous improvement.</li><li>Strong use of IT systems to analyse data, and produce reports &amp; KPI’s etc.</li><li>Strong interpersonal skills with experience influencing operating teams and contractors.</li><li>Strong cultural awareness.</li><li>Able to prioritise work in a high activity environment.</li><li>Able to work within a multidisciplinary team.</li><li>Ability to handle multiple tasks with minimal supervision.</li><li>Strong bias for being proactive and getting results.</li><li>Demonstrate planning, organizational and communication skills.</li></ul><br>With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil &amp; Gas, Power &amp; Renewables, Chemicals, Construction &amp; Infrastructure, Life Sciences, Mining and&nbsp;Manufacturing&nbsp;sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients. <br><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Mechanical Engineer will be based on-site in Basra, Iraq, and will be responsible for supervising and executing mechanical installation works for static and rotary equipment within an EPC oil &amp; gas construction project. The role ensures that all installation activities are performed safely, in compliance with project specifications, approved drawings, international standards, and HSE requirements.</p><p><br></p><p>The Mechanical Engineer will coordinate closely with construction, QA/QC, piping, commissioning teams, and subcontractors to ensure proper installation, alignment, testing, and timely project delivery while maintaining quality and safety standards throughout the project lifecycle.</p><p><br></p><ul><li><p>Supervise installation of static equipment including pressure vessels, heat exchangers, columns, tanks, separators, and other process equipment in accordance with approved drawings and specifications.</p></li><li><p>Oversee installation, alignment, and grouting of rotary equipment including pumps, compressors, blowers, and package units as per manufacturer requirements and project standards.</p></li><li><p>Monitor piping installation works including supports, fit-up, routing, and hydrotest preparation to ensure compliance with approved isometrics and piping layouts.</p></li><li><p>Verify equipment foundation preparation, anchor bolt positioning, and base plate leveling prior to equipment erection.</p></li><li><p>Ensure proper execution of cold and hot alignment, shaft alignment, and pre-commissioning mechanical checks for rotating equipment.</p></li><li><p>Review mechanical drawings such as GA drawings, P&amp;IDs, isometrics, vendor drawings, and method statements to ensure correct site implementation.</p></li><li><p>Coordinate with QA/QC for inspections, material verification, NDT requirements, hydrostatic testing, and mechanical completion documentation.</p></li><li><p>Interface with other disciplines including E&amp;I and civil teams to ensure proper coordination of mechanical installations.</p></li><li><p>Ensure compliance with international standards such as ASME, API, and project technical specifications.</p></li><li><p>Support pre-commissioning and commissioning activities including flushing, leak testing, mechanical run tests, and system handover to operations.</p></li><li><p>Participate in daily progress meetings, monitor subcontractor performance, and report progress to the Construction Manager.</p></li><li><p>Ensure strict adherence to HSE regulations, conduct risk assessments, and ensure safe mechanical lifting, rigging, and installation activities on site.</p><p><br></p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor's degree in Mechanical Engineering or a related field.</p></li><li><p>Good knowledge in mechanical engineering principles, particularly in the oil and gas sector.</p></li><li><p>Knowledge of the design and process of oil and gas plants</p></li><li><p>Understanding of maintenance and troubleshooting techniques of equipment involved in field services and EPC operations.</p></li><li><p>Strong analytical and problem-solving skills.</p></li><li><p>Effective communication and teamwork abilities.</p></li><li><p>Ability to learn quickly and adapt to new tools and technologies.</p></li><li><p>Familiarity with industry standards and safety regulations is an advantage.</p></li><li><p>7-10 years experience in static, rotary equipment installation.</p></li><li><p>Knowledge of piping and general mechanical works.</p></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Electrical &amp; Instrumentation (E&amp;I) Engineer will be based on-site in Basra, Iraq, and will be responsible for supervising and executing electrical and instrumentation installation works for an EPC oil &amp; gas construction project. The role ensures that all site activities are performed safely, in compliance with approved drawings, project specifications, international standards, and HSE requirements.</p><p><br></p><p>The E&amp;I Engineer will coordinate closely with construction, QA/QC, engineering, commissioning teams, and subcontractors to ensure proper installation, testing, pre-commissioning, and timely project delivery while maintaining quality, safety, and schedule objectives throughout the project lifecycle.</p><p><br></p><ul><li><p>Supervise and execute all electrical installation activities including MV/LV systems, transformers, switchgear, MCCs, distribution panels, UPS systems, and associated power infrastructure in accordance with approved drawings and project specifications.<br></p></li><li><p>Monitor and control cable tray installation, cable pulling, glanding, termination, and testing activities, ensuring compliance with method statements, ITPs, and international standards.<br></p></li><li><p>Ensure proper installation of earthing and grounding systems, lightning protection systems, and hazardous area electrical equipment (Ex-rated equipment) as per project and safety requirements.<br></p></li><li><p>Supervise installation of field instrumentation including pressure, temperature, flow, and level transmitters, control valves, analyzers, junction boxes, and marshalling cabinets.</p></li></ul><br><ul><li><p>Oversee instrument tubing works, impulse line installation, supports, tagging, and identification to ensure alignment with engineering drawings and hook-up details.<br></p></li><li><p>Support loop checking, calibration, pre-commissioning, and commissioning activities in coordination with the commissioning team and client representatives.</p><br></li><li><p>Review and interpret technical documents including single line diagrams (SLDs), wiring diagrams, hook-up drawings, cable schedules, and layout drawings to ensure accurate site execution.</p></li></ul><br><ul><li><p>Coordinate with construction, QA/QC, engineering, and subcontractor teams to resolve technical issues and ensure smooth workflow and timely project execution.</p></li></ul><br><ul><li><p>Ensure all installation works are performed in compliance with project specifications, international standards (IEC, NEC, API where applicable), and contractual requirements.</p></li></ul><br><ul><li><p>Participate in inspections, raise RFIs where required, support punch list clearance, and ensure proper documentation and as-built records are maintained.</p></li></ul><br><ul><li><p>Enforce strict adherence to HSE policies, conduct risk assessments, participate in toolbox talks, and ensure safe execution of works within live plant or hazardous areas.</p></li></ul><br><ul><li><p>Monitor daily site progress, report to the Construction Manager /Project Manager, and ensure activities are completed within approved schedules and cost parameters</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor's degree in Electrical Engineering, or a related field</p></li><li><p>Experience working on oil and gas EPC projects</p></li><li><p>Strong understanding of oil and gas process systems and equipment, with a focus on flare gas recovery systems.</p></li><li><p>7-10 years experience in static, rotary equipment installation.</p></li><li><p>Knowledge of piping and general mechanical works.</p></li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are currently seeking for passionate and dynamic Maintenance professionals who pride themselves on their ability to deliver extraordinary levels of customer service and provide creative solutions to our guests.<br><br>As a Duty Engineer you are responsible for all the mechanical and technical maintenance and HVAC equipment within your property and your role will include key responsibilities such as:<br><br>• Supervise and control the preventive maintenance schedule<br>• Be responsible for the health safety of the property<br>• Follow the preventive maintenance chart strictly and maintain records for future reference<br>• Coordinate with other department’s counterparts to ensure their satisfaction on quality and progress<br>• Create departmental training programmes among engineering employees and create opportunities to multitask<br>• Distribute the work to subordinates accordingly to their capabilities in order to get the best results to the specified standards</p> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>E&amp;I Engineer<br><br>E&amp;I EngineerECSS30 - Sr. Specialist, Commissioning<br><p>KBR Sustainable Technology Solutions (STS) provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design capabilities, and smart solutions to optimize planned and operating assets.</p><br><br><br><p>Responsible for start-up and plant operations activities including equipment and system checkout, inspection for proper installation, review for correct design, and calculation of expected system and equipment operating parameters under temporary start-up conditions. Coordinates start-up operations, including the direction of craft, and all other start-up activities such as flushing, chemical cleaning, and initial equipment and system operation. Coordinates performance tests and calculates test results and heat balances. Performs calculations required to properly evaluate design changes, provides engineering reports for the engineering department to assist in design change preparation. Works with client at the site. Under general supervision, performs all conventional aspects of the functional area subject matter. Devises new approaches to problems encountered. Plans, schedules, and conducts work requiring judgment in the independent evaluation, selection, and adaptation of engineering techniques, procedures, and criteria. Performs work which involves conventional engineering practice but may include a variety of complex features such as conflicting design requirements, unsuitability of conventional materials, and difficult coordination requirements. Provides technical guidance to designers and less experienced engineers. Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations. Skills are typically acquired through an undergraduate degree in Engineering and a minimum of 10 years related experience, with average experience ranging from 10-15 years.</p><br><br><br><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Position: Principal Well Engineer <br> Department: Wells<br> Location: Basra, Iraq<br> Duration: 12 months renewable <br> Rotation: 28/28<br> <br> <strong>Role synopsis</strong>&nbsp;<br> <br> The Principal Well Engineer reports to the Well Engineering Manager (WEM). The role will be responsible for supplying well engineering and well operation support across the Wells department. Responsibilities include the development and implementation of a bespoke Wells Management System (WMS), engineering and management of integrated well engineering projects across the drilling, workover and well services functions as well as providing peer review and guidance to the wider WE community.<br> <br> The individual shall have a broad experience base across drilling, workover and well services with a main experience base in one or more of these areas. A thorough understanding of Wells organisations and management systems in complex operations will be required; similarly a strong working relationship with the wells operations teams, subsurface, HSE, base management, reservoir engineering and contractors is essential. The individual should be adaptable and demonstrate a willingness to apply themselves across various wells functions.<br> <strong>Key accountabilities</strong>&nbsp;<ul><li>Creation, review and update of documents within the Wells Management System (WMS), standards and BOD’s under the direct guidance of the WEM</li><li>Project management and engineering of integrated engineering projects across the drilling, workover and well service functions working with various teams and stakeholders across multiple teams and departments.</li><li>The identification, evaluation and application of value enhancing, innovative and new technologies and continuous improvement initiatives across the Wells teams.</li><li>Lead problem-solving sessions with delivery teams, engineering and service providers to resolve challenges and manage change.</li><li>Consolidate performance reporting across Wells, structuring input from the various functions and presenting this in a clear and meaningful way on a regular basis.</li><li>Focal point for wellheads and Xmas trees contracts. Includes preparation and evaluation of tenders. Technical design and review ensuring fit-for-purpose design. Operational oversight.</li><li>Focal point for OCTG contracts. Includes preparation and evaluation of tenders. Technical design and review ensuring fit-for-purpose design.</li><li>Develop and initiate a WMS self-verification process.</li><li>Participate in HSE &amp; NPT incident root cause analysis, investigations and reporting.</li><li>Participate in planning of well control exercises.</li><li>Arrange and facilitate contractor performance improvement meetings as and when required.</li><li>Assurance of the technical integrity of operations and compliance with in-country law, policy, international standards and guidelines.</li><li>Develop (annual) WE departmental objectives for inclusion in AOP and report on progress throughout the year.</li><li>Initiate and or contribute to engineering research projects.</li><li>Provide additional technical input and support to various wells teams when required.</li></ul><strong>Criteria and Qualifications</strong><ul><li>Possesses international experience in the oil &amp; gas industry.</li><li>Educated to Bachelor of Science (Engineering) degree level, or equivalent.</li><li>A broad engineering and operations experience across drilling, workover, well services and well integrity with a main experience base in one or more of these areas.</li><li>Team player, fluent in English language with strong communication skills is essential.</li><li>Strong leadership.</li><li>Good interpersonal skills – peer reviews/consultation</li><li>Experience in developing, maintenance and improvement of Integrated Management Systems in the wells sphere.</li><li>Experience working for an international major operator preferred.</li><li>Knowledge of tender preparation and evaluation of wells contracts.</li><li>Effective and proficient communicator, both verbal (English language) and written.</li><li>Maintains a high standard of business integrity, professional behaviour and confidentiality.</li><li>Experience in PowerBI and Sharepoint.</li><li>Experience working in a Joint Venture environment and in a remote location.</li><li>Experience in tendering &amp; contracting. Demonstratable history of being part or leading a Technical Evaluation Team for tender evaluation (Technical only).</li><li>Experience working on land operations, and in the Middle East would be considered beneficial.</li></ul><br>With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil &amp; Gas, Power &amp; Renewables, Chemicals, Construction &amp; Infrastructure, Life Sciences, Mining and&nbsp;Manufacturing&nbsp;sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients. <br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Senior CWI Engineer<br><br>Position Details<ul><li>Position Title: CWI Senior Engineer</li><li>Department: Wells</li><li>Location: Majnoon Oil Field – Basra, Iraq</li><li>Reports to: CWI Engineering Team Lead</li><li>Direct Reports: None</li></ul>1. Role Purpose<p>Provide engineering expertise in the planning, design, and execution support of completions, workover, well intervention and well integrity operations. Ensure high-quality engineering input, technical assurance, well integrity compliance, and continuous performance improvement across CWI operations.</p><br><br>2. Key ResponsibilitiesHSSE &amp; Well Integrity<ul><li>Champion a proactive safety culture with Zero Harm.</li><li>Conduct site safety visits, audits, and toolbox talk reviews.</li><li>Ensure compliance with well integrity standards such as NORSOK D‑010</li><li>Ensure engineering designs comply with HSSE policies, Life-Saving Rules, and well integrity guidelines.</li><li>Participate in risk assessments, HAZID, HAZOP, and technical assurance reviews.</li><li>Support incident investigations by providing technical analysis and recommendations.</li></ul>Program Development &amp; Technical Assurance<ul><li>Prepare and review Completion Programs, Workover Programs, and Intervention Procedures.</li><li>Develop well schematics, tool string designs, barrier philosophies, and risk assessments.</li><li>Ensure engineering designs comply with well integrity standards and operational requirements.</li><li>Perform technical evaluations for new technologies, equipment, and intervention methods.</li></ul>Operational Support &amp; Problem Solving<ul><li>Provide real-time engineering support to wellsite supervisors during operations.</li><li>Analyze operational challenges and propose technical solutions.</li><li>Perform pre-job and post-job reviews to ensure procedural compliance.</li><li>Support SIMOPS planning and coordination with Production, Subsurface, and Drilling teams.</li></ul>Cost &amp; Schedule Control<ul><li>Support development of budgets, forecasts, and AFE inputs.</li><li>Monitor job efficiency, performance, and operational KPIs.</li><li>Identify cost‑saving opportunities without compromising safety or quality.</li></ul>Contractor &amp; Performance Management<ul><li>Lead technical interface with service companies and contractors.</li><li>Evaluate technical proposals, equipment specifications, and new technologies.</li><li>Support tendering, technical evaluations, scopes of work, and contract management.</li><li>Monitor service quality and ensure alignment with engineering requirements.</li></ul>Reporting &amp; Governance<ul><li>Review technical proposals from service companies and ensure alignment with operational requirements.</li><li>Participate in contractor performance reviews and technical evaluations.</li><li>Ensure QA/QC compliance for equipment and tools used in rigless operations.</li></ul>3. Qualifications &amp; Experience<ul><li>Bachelor’s degree in Petroleum, Mechanical, or related Engineering discipline.</li><li>8-12+ years of experience in completions, well intervention, workover, and well integrity engineering disciplines.</li><li>Valid IWCF Level 4 Well Intervention Pressure Control certification.</li><li>Strong experience leading CWI engineering teams in high‑activity onshore fields.</li><li>Comprehensive understanding of well integrity standards (e.g., NORSOK D‑010), well control, and barrier management.</li><li>Strong knowledge of international standards (API, ISO, IOGP) and regulatory compliance requirements.</li><li>Expertise in completion, CT, slickline, e-line, ESP, stimulation, and workover engineering.</li><li>Experience in Iraq/Majnoon preferred.</li><li>Fluency in English; Arabic is an advantage.</li></ul>4. Core Competencies<ul><li>CWI Technical Mastery</li><li>Well Integrity &amp; Risk Management</li><li>Engineering &amp; HSSE Leadership</li><li>Performance Management &amp; Continuous Improvement</li><li>Cross‑Functional Collaboration</li><li>Contractor &amp; Stakeholder Management</li><li>Communication &amp; Technical Reporting</li></ul><br><p>Approved By: Steven Hendry</p><br><br><br><p>Position: Wells Manager</p><br><br><br><p>Date: 03 Mar 2026</p><br><br><br><br><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Role Summary We are seeking a versatile and highly organized Operations &amp; Performance Admin Engineer to join the talabat mart (tMart) team. This hybrid role bridges technical facilities management with data-driven operational performance administration. On the engineering side, you will oversee the maintenance, procurement support, and supplier supervision for dark store facilities, ensuring critical infrastructure like cold chain systems (chillers/freezers) and electrical networks remain fully operational. On the administration side, you will dedicate focus to monitoring, tracking, and reporting the operational health of the dark stores, reviewing ground-level efficiency metrics, and delivering structured compliance dashboards to ensure seamless 30-minute delivery execution. What s On Your Plate? Engineering &amp; Facilities Management: Infrastructure Maintenance: Proactively identify, diagnose, and manage the maintenance and repair needs of essential store infrastructure, including industrial chillers, freezers, HVAC/AC systems, electrical distribution networks, and general facilities. Procurement Documentation: Formulate highly accurate and detailed Scope of Work (SOW) documents and Bill of Quantities (BOQ) for new equipment purchases, facility upgrades, and engineering services. Supplier Supervision: Supervise on-site third-party contractors and service providers during engineering installations, routine maintenance, and emergency repairs, enforcing strict quality and safety standards. Handover &amp; Receiving: Conduct technical inspections and serve as the final authority for the formal receiving and handover of newly executed engineering projects, facilities, or physical assets. Performance Administration: Real-Time Order Flow Monitoring: Maintain a regular order-flow monitoring schedule on the Shopper platform, and actively inform the relevant store team via communication groups in case of any delays in assigning or preparing orders. Nightly Sales Tracking: Create and publish structured sales update tables every night at 7:00 PM, 9:00 PM, 11:00 PM, and 12:15 AM to keep the team informed on performance milestones. Picker Performance Analytics: Check picker performance at the granular order level, calculate efficiency averages, and prepare comprehensive reports to help team leaders optimize speed and accuracy. Customer Feedback Administration: Follow up with the account advisor to aggregate, categorize, and report back on direct customer feedback to identify service delivery bottlenecks. Operational Sheet Management: Maintain and systematically update the central operations Google Sheet for all immediate store-level updates, operational tracking parameters, and system notifications. In-App Quality Control Audits: Perform weekly systematic audits of images on the talabat App, flagging discrepancies, and proactively uploading missing visual assets to guarantee catalog completeness. Barcode Error Tracking: Identify and log non-working barcodes using the specialized operations tracking sheet to minimize order picking delays. Store Invoice &amp; Compliance Audits: Monitor, track, and verify the physical and digital invoices uploaded directly by the store branches to ensure operational data integrity.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"><b>Education &amp; Experience:</b></p><p>Bachelor's degree in Mechanical, Electrical, or Industrial Engineering, or a highly related technical field, combined with at least 3+ years of experience across data tracking, performance reporting, facilities engineering, or administrative operations.</p><b>Technical Facility Skills:</b><p>Strong hands-on or supervisory experience identifying maintenance needs for commercial refrigeration (chillers/freezers), HVAC networks, and electrical systems. Proven ability to draft professional SOW and BOQ documents.</p><b>Analytical &amp; Tooling Proficiency:</b><p>Highly data-oriented and structured, with an advanced proficiency in Google Sheets/Excel. Comfortable managing high-volume operational dashboards and catching subtle metric anomalies.</p><b>Execution &amp; Communication:</b><p>Strong communication and reporting skills to seamlessly present daily facilities statuses and weekly performance summaries directly to Operations Management.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><b>Job Description </b><div> <p> <strong>Role Summary</strong> </p> <p>We are seeking a highly motivated and detail-oriented Engineer Assistant to join the talabat<br> mart (tMart) Operations team. In this role, you will serve as the core technical focal point<br> handling dark store expansion details, layouts, procurement documentation, and day-to-day<br> facility maintenance tracking. You will play a pivotal role in designing store layout developments, drafting construction-related technical documents, and supervising third-party contractors across civil, electrical, and piping disciplines to ensure our rapid grocery fulfillment infrastructure operates seamlessly.</p> <p> <strong>What s On Your Plate?</strong> </p> <p> <strong>Expansion &amp; Layout Development:</strong> </p> <ul> <li> <p>Technical Expansion Focal Point: Serve as the primary point of contact for all technical expansion details, collaborating with stakeholders to translate dark store requirements into actionable site project scopes.</p> </li> <li> <p>Layout Development &amp; Enhancement: Develop initial store layouts and propose layout enhancements to maximize space utilization.</p> </li> </ul> <p> </p> <p> <strong>Procurement &amp; Technical Documentation:</strong> </p> <ul> <li> <p>Construction BOQ &amp; SOW: Formulate comprehensive Bills of Quantities (BOQs) and Scopes of Work (SOWs) for new store construction, physical expansions, and facility remodeling.</p> </li> <li> <p>Needs-Based Engineering Packages: Directly evaluate operational store needs and build tailored technical procurement packages for hardware, layout fixtures, and physical infrastructure upgrades.</p> </li> </ul> <p> </p> <p> <strong>Facilities Maintenance &amp; Contractor Supervision:</strong> </p> <ul> <li> <p>Multidisciplinary Maintenance Tracking: Proactively identify, prioritize, and log maintenance needs across electrical networks, civil/structural store components, and water/refrigeration piping systems.</p> </li> <li> <p>Schedules &amp; Lifecycle Management: Establish, coordinate, and monitor preventive maintenance schedules to minimize store downtime and prevent asset degradation.</p> </li> <li> <p>On-Site Contractor Management: Serve as the main point of contact dealing with civil, electrical, HVAC and piping contractors, suppliers, and external service providers during installations or repair works.</p> </li> <li> <p>Supervision &amp; Asset Handover: Actively supervise contractor execution on-site, enforcing quality control, adherence to SOW guidelines, and directing final receiving or asset handover back to store operations.</p></li></ul></div></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph">Qualifications </p><div> <ul> <li> <p> <strong>Education &amp; Experience: </strong>Diploma or Bachelor s degree in Civil, Electrical, Mechanical, or Industrial Engineering, Architecture, or a highly related technical field. Minimum of 1 2 years of practical experience in site coordination, drafting, facilities maintenance, or an engineering assistant capacity.</p> </li> <li> <p> <strong>Technical Layout &amp; Project Skills: </strong>Proficiency in drafting tools (e.g., AutoCAD or similar layout planning software) with an understanding of commercial or warehousing space optimization. strong foundational knowledge in drafting construction BOQs and SOWs.</p> </li> <li> <p> <strong>Contractor &amp; Site Management: </strong>Demonstrated experience dealing with or supervising external contractors, vendors, and suppliers across construction trades (civil, electrical, or piping).</p> </li> <li> <p> <strong>Core Competencies:</strong> Exceptional organizational skills to handle shifting maintenance needs, schedule planning, and technical execution updates across multiple dark store properties simultaneously.</p></li></ul></div><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Wood is recruiting for a Mechanical Engineer to join its Iraq business unit focusing on ensuring that all work is completed without compromise to quality and is delivered according to the project schedule.</p><br><p>This role is a full-time on-site role in Basra, Iraq with travel requirement.</p><br><br> Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy &amp; Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com<br> <b>Diversity Statement&nbsp;</b><br> We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.<br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <strong> We are supporting a leading international Oil &amp; Gas operator in Basra to hire an experienced <strong>Wells Civils Data Engineer.<br></strong><br>This is a unique opportunity to contribute to a long-term, high-impact project, working alongside global experts on one of the region’s most strategic energy developments.<br>With over 1500 workers supporting our clients in Iraq, NES has deep insight into their culture and hiring expectations - allowing us to support candidates effectively throughout the hiring process. <br> <br>Job Description <br>Job Title&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;:Wells Civils Data Engineer<br>Job Category&nbsp; &nbsp;:Wells - Drilling, Workover and Well Services<br>Location&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;:Basra (rotational 14:14 subject to change)<br>Role Summary:<br></strong>The Wells Civils Data Engineer reports directly to the Wells Civils Manager. <br>The role is responsible for all data related to civil scope of works for drilling, workovers and well services in the field. As required, may also be responsible for the correlation and updating QAQC &amp; KPI processes.<br>The role is instrumental in maintaining the wells civil databases, strengthening commitment to excellence, operational compliance and efficiency.<strong><strong> <br>Key Responsibilities<br></strong></strong><ul><li>Compile daily contractor reports and prepare the Wells Civils daily report.</li><li>Prepare and correlate the Monthly Dashboard for publication in Power BI.</li><li>Coordinate training requests, manage approvals, send notifications, and track progress.</li><li>Update the Civils Operations Tracker with daily data entries.</li><li>Oversee the Call Out Cost Tracker, ensuring autonomy and accuracy.</li><li>Prepare call outs, input into the cost tracker and send to Civils Team Leader for signatures</li><li>Prepare &amp; issue completion certificates to the Civils Team Leader for required signatures.</li><li>Maintain document controls for the wells folders to ensure all information is current.</li><li>Carry out additional duties as assigned.</li></ul><strong><strong><strong>Qualifications &amp; Experience:<br></strong><br><strong>Essential:</strong><br></strong></strong><ul><li>A minimum of 3 years’ experience in Data Management or a Document Control role within the Oil &amp; Gas industry.</li><li>Demonstrates advanced proficiency in utilizing the Microsoft Office suite of applications.</li><li>Excel expert</li><li>Skilled in MS Project</li><li>English language skills – both written &amp; spoken.</li><li>Arabic Speaker.</li><li>Capable of handling a fast-paced, high-volume work environment with frequent challenges.</li><li>Demonstrated experience in managing dynamic, multi-site operations.</li><li>Strong communicator &amp; team player.</li><li>Attention to detail</li></ul><strong><strong>&nbsp;<br><strong>Preferred:</strong><br></strong></strong><ul><li>A bachelor’s degree in Engineering or a technically related subject is desired or analogous discipline (Scientific).</li><li>International experience preferred Middle East onshore.</li></ul><br> <strong>Why This Opportunity Stands Out:</strong><br>• Long-term project stability (many contractors exceed 10 years)<br>• Exposure to a major global operator<br>• Opportunity to work alongside industry-leading professionals<br><strong> Why Apply Through NES?</strong><br>NES is the world’s leading engineering staffing provider, operating across Oil &amp; Gas, Power, Life Sciences, and infrastructure sectors.<br><ul><li>80+ offices across 45 countries</li><li>24,000+ contractors globally and 10,000+ in the Middle East</li><li>Strong regional presence and long-term client partnerships</li></ul><br> If you find this opportunity matching your skills or if you know someone suitable for the role, please drop your CV on sayali.kothmire@nesfircroft.com<br>With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil &amp; Gas, Power &amp; Renewables, Chemicals, Construction &amp; Infrastructure, Life Sciences, Mining and&nbsp;Manufacturing&nbsp;sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients. <br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Company Description<br><p>Since launching in Kuwait in 2004, talabat, the leading on-demand food and Q-commerce app for everyday deliveries, has been offering convenience and reliability to its customers. talabat’s local roots run deep, offering a real understanding of the needs of the communities we serve in eight countries across the region.<br> <br> We harness innovative technology and knowledge to simplify everyday life for our customers, optimize operations for our restaurants and local shops,&nbsp; and provide our riders with reliable earning opportunities daily.<br> <br> At talabat, we foster an innovative environment where our talabaty employees can strive to create a positive impact across the region through the use of our platform.</p><br><br>Job Description<br><p><strong>Role Summary</strong></p><br><p>We are seeking a highly motivated and detail-oriented Engineer Assistant to join the talabat<br> mart (tMart) Operations team. In this role, you will serve as the core technical focal point<br> handling dark store expansion details, layouts, procurement documentation, and day-to-day<br> facility maintenance tracking. You will play a pivotal role in designing store layout developments, drafting construction-related technical documents, and supervising third-party contractors across civil, electrical, and piping disciplines to ensure our rapid grocery fulfillment infrastructure operates seamlessly.</p><br><p><strong>What’s On Your Plate?</strong></p><br><p><strong>Expansion &amp; Layout Development:</strong></p><br><ul><li><p>Technical Expansion Focal Point: Serve as the primary point of contact for all technical expansion details, collaborating with stakeholders to translate dark store requirements into actionable site project scopes.</p><br></li><li><p>Layout Development &amp; Enhancement: Develop initial store layouts and propose layout enhancements to maximize space utilization.</p><br></li></ul><p><strong>Procurement &amp; Technical Documentation:</strong></p><br><ul><li><p>Construction BOQ &amp; SOW: Formulate comprehensive Bills of Quantities (BOQs) and Scopes of Work (SOWs) for new store construction, physical expansions, and facility remodeling.</p><br></li><li><p>Needs-Based Engineering Packages: Directly evaluate operational store needs and build tailored technical procurement packages for hardware, layout fixtures, and physical infrastructure upgrades.</p><br></li></ul><p><strong>Facilities Maintenance &amp; Contractor Supervision:</strong></p><br><ul><li><p>Multidisciplinary Maintenance Tracking: Proactively identify, prioritize, and log maintenance needs across electrical networks, civil/structural store components, and water/refrigeration piping systems.</p><br></li><li><p>Schedules &amp; Lifecycle Management: Establish, coordinate, and monitor preventive maintenance schedules to minimize store downtime and prevent asset degradation.</p><br></li><li><p>On-Site Contractor Management: Serve as the main point of contact dealing with civil, electrical, HVAC and piping contractors, suppliers, and external service providers during installations or repair works.</p><br></li><li><p>Supervision &amp; Asset Handover: Actively supervise contractor execution on-site, enforcing quality control, adherence to SOW guidelines, and directing final receiving or asset handover back to store operations.</p><br></li></ul><br>Qualifications<br><ul><li><p><strong>Education &amp; Experience: </strong>Diploma or Bachelor’s degree in Civil, Electrical, Mechanical, or Industrial Engineering, Architecture, or a highly related technical field. Minimum of 1–2 years of practical experience in site coordination, drafting, facilities maintenance, or an engineering assistant capacity.</p><br></li><li><p><strong>Technical Layout &amp; Project Skills: </strong>Proficiency in drafting tools (e.g., AutoCAD or similar layout planning software) with an understanding of commercial or warehousing space optimization.&nbsp; strong foundational knowledge in drafting construction BOQs and SOWs.</p><br></li><li><p><strong>Contractor &amp; Site Management: </strong>Demonstrated experience dealing with or supervising external contractors, vendors, and suppliers across construction trades (civil, electrical, or piping).</p><br></li><li><p><strong>Core Competencies:</strong> Exceptional organizational skills to handle shifting maintenance needs, schedule planning, and technical execution updates across multiple dark store properties simultaneously.</p><br></li></ul><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br>About the opportunity<br><p><strong>Role Summary</strong></p><br><br><p>We are seeking a highly motivated and detail-oriented Engineer Assistant to join the talabat<br> mart (tMart) Operations team. In this role, you will serve as the core technical focal point<br> handling dark store expansion details, layouts, procurement documentation, and day-to-day<br> facility maintenance tracking. You will play a pivotal role in designing store layout developments, drafting construction-related technical documents, and supervising third-party contractors across civil, electrical, and piping disciplines to ensure our rapid grocery fulfillment infrastructure operates seamlessly.</p><br><br><p><strong>What’s On Your Plate?</strong></p><br><br><p><strong>Expansion &amp; Layout Development:</strong></p><br><br><ul><li><p>Technical Expansion Focal Point: Serve as the primary point of contact for all technical expansion details, collaborating with stakeholders to translate dark store requirements into actionable site project scopes.</p><br><br></li><li><p>Layout Development &amp; Enhancement: Develop initial store layouts and propose layout enhancements to maximize space utilization.</p><br><br></li></ul><br><p><strong>Procurement &amp; Technical Documentation:</strong></p><br><br><ul><li><p>Construction BOQ &amp; SOW: Formulate comprehensive Bills of Quantities (BOQs) and Scopes of Work (SOWs) for new store construction, physical expansions, and facility remodeling.</p><br><br></li><li><p>Needs-Based Engineering Packages: Directly evaluate operational store needs and build tailored technical procurement packages for hardware, layout fixtures, and physical infrastructure upgrades.</p><br><br></li></ul><br><p><strong>Facilities Maintenance &amp; Contractor Supervision:</strong></p><br><br><ul><li><p>Multidisciplinary Maintenance Tracking: Proactively identify, prioritize, and log maintenance needs across electrical networks, civil/structural store components, and water/refrigeration piping systems.</p><br><br></li><li><p>Schedules &amp; Lifecycle Management: Establish, coordinate, and monitor preventive maintenance schedules to minimize store downtime and prevent asset degradation.</p><br><br></li><li><p>On-Site Contractor Management: Serve as the main point of contact dealing with civil, electrical, HVAC and piping contractors, suppliers, and external service providers during installations or repair works.</p><br><br></li><li><p>Supervision &amp; Asset Handover: Actively supervise contractor execution on-site, enforcing quality control, adherence to SOW guidelines, and directing final receiving or asset handover back to store operations.</p><br><br></li></ul><br>What you need to be successful<br><ul><li><p><strong>Education &amp; Experience: </strong>Diploma or Bachelor’s degree in Civil, Electrical, Mechanical, or Industrial Engineering, Architecture, or a highly related technical field. Minimum of 1–2 years of practical experience in site coordination, drafting, facilities maintenance, or an engineering assistant capacity.</p><br><br></li><li><p><strong>Technical Layout &amp; Project Skills: </strong>Proficiency in drafting tools (e.g., AutoCAD or similar layout planning software) with an understanding of commercial or warehousing space optimization. strong foundational knowledge in drafting construction BOQs and SOWs.</p><br><br></li><li><p><strong>Contractor &amp; Site Management: </strong>Demonstrated experience dealing with or supervising external contractors, vendors, and suppliers across construction trades (civil, electrical, or piping).</p><br><br></li><li><p><strong>Core Competencies:</strong> Exceptional organizational skills to handle shifting maintenance needs, schedule planning, and technical execution updates across multiple dark store properties simultaneously.</p><br><br></li></ul><br>Who we are<br><p>Since launching in Kuwait in 2004, talabat, the leading on-demand food and Q-commerce app for everyday deliveries, has been offering convenience and reliability to its customers. talabat’s local roots run deep, offering a real understanding of the needs of the communities we serve in eight countries across the region.<br> <br> We harness innovative technology and knowledge to simplify everyday life for our customers, optimize operations for our restaurants and local shops, and provide our riders with reliable earning opportunities daily.<br> <br> At talabat, we foster an innovative environment where our talabaty employees can strive to create a positive impact across the region through the use of our platform.</p><br><br> <br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Control Field Service Engineer </b></p><br><p><b>Are you looking for the next step in your career?</b> <b>Do you have a passion for delivering new technology and problem solving to our customers in the field?</b><br>&nbsp;</p><br><p><b>Be part of our Team</b><br>&nbsp;Our Industrial and Energy Technology (IET) operates across 120 countries and serves the entire energy value-chain and industrial sector. We hold an extensive portfolio of rotating equipment, process flow, transmission technology and lifecycle services. Our Engineering Transformation team work to improve the quality of our Engineering processes.<br>&nbsp;</p><br><p><b>Partner with the best</b></p><br><p>As a Field Service Engineer (FSE) you will represent BH both technically and professionally to ensure the equipment to be installed, maintained and started-up properly. Your key responsibilities will include:</p><br><ul><li>Provide on-site technical direction on control systems installation, including loop checks, system tests during start-up, commissioning, troubleshooting and maintenance on customer owned sites in remote oilfield, power generation and industrial facilities (Power generation includes customer owned utilities, marine drives, petrochemical, paper, steel, automotive and transportation industries)</li><li>Supervise the positioning and wiring of control panels such as Unit Control Panel (UCP), auxiliary panels of any type, Direct Current Panel (DCP), battery charger and battery cells, Generator Control &amp; Protection Panel (GCPP), Motor Control Center (MCC), etc., particularly electrical hook up, pneumatic hook up, primary hook up and field wiring done by client or sub-contractor</li><li>Check the functionality of the control sequencing for all auxiliary systems, relevant to the turbine and driven equipment such as lube oil system, hydraulic oil system, oil coolers, starting means (motor &amp; torque converter/gas expander/hydraulic starter &amp; pumps etc.), enclosure and building ventilation systems, Fire &amp; Gas detection system, compressor seal oil system, compressor dry gas seal system, process gas coolers, fuel and process gas valves, anti-surge system, etc.</li><li>Leading Installation, Maintenance, Commissioning Site Activities with proper Customer/Company Schedule Targets Mindset following strictly Quality and HSE Rules</li><li>Establish through the immediate Report after the Daily HSE Toolbox Talking the critical activity tasks and remark any HSE aspect to be followed</li><li>Utilizing Problem Solving Skills, Engineering Instructions, Drawings, and Process Instructions during <b><u>Turbomachinery’s</u></b> Commissioning and Start-up Activities - Possessing the Technical Capability to troubleshoot and provide routine maintenance checkout for <b><u>Gas Turbines</u></b> Products</li><li>Preparation of job-planning documents based to Assignment’s Scope of Work (Installation, Upgrade, Outage)</li><li>Provide leadership and technical direction to skilled labor, performing work at customer sites, maintaining strong safety mindset to assure the executed work reflects the technical requirements within Baker Hughes and customer safety standards</li><li>Providing input for Daily Outage and Weekly Installation Reports</li><li>Communicate effectively with Service/Installation/Project Managers and Site Manager about job planning, job execution, job progression as well as personnel site arrivals and departures</li><li>Prepare timely and accurate technical reports for customer records and a reference for future field service interventions.</li><li>Actively participate to customer and/or contractor meeting.</li><li>Apply all Quality procedures and documentation applicable to specific activities, ensuring they are properly followed and updated</li><li>Ensure that Site Quality Check List/Job Cards/Field Procedure are applied, and relevant documentation is properly signed.</li><li>Ensure reports and drawings “marked-up” are completed.</li><li>Ensure all Non-Conformity (technical and materials) are properly addressed using Baker Hughes e-tools and follow up till resolution.</li><li>Ensure compliance with local/current legislation, requests &amp; requirements present in the site Safety Manual</li></ul><p><b>Fuel your passion</b><br>&nbsp;To be successful in this role you will:</p><br><ul><li>Have Engineering Degree with minimum 10 years of relevant field experience in Oil &amp; Gas or Energy Sector.</li><li>Have strong knowledge on rotating equipment installation/ commissioning /maintenance / Troubleshooting. Hands on expertise on of HDGT (Frame 5/2, 6B, 7E &amp; 9E) field Instrumentation, Control logic and their auxiliaries.</li><li>High expertise and Hands-On Knowledge of Mark Vie turbine control panels.</li><li>Knowledge of PLC control panels</li><li>Experience on DLN (Dry Low NOx) systems mapping.</li><li>Be able to speak fluent English language (Speaking and writing. Crucial for Report, Customer interaction and communication with ENG HQ technical alignment)</li><li>Have strong customer service-orientation, and the ability to communicate effectively with a range of stakeholders.</li><li>Proven ability to work efficiently without direct supervision.</li><li>Proven analytical and quality improvement ability.</li><li>Strong interpersonal and leadership skills</li><li>Health, Safety and Environmental mindset and compliance.</li><li>This role requires extensive travel. Applicants must be willing and able to travel significantly (not less than 70%) without geographical restriction including offshore</li></ul><p><b>Working with us</b><br>Our people are at the heart of what we do at Baker Hughes. We know we are better when all of our people are developed, engaged and able to bring their whole authentic selves to work. We invest in the health and well-being of our workforce, train and reward talent and develop leaders at all levels to bring out the best in each other.<br>&nbsp;</p><br><p><b>Working for you</b><br>&nbsp;Our inventions have revolutionized energy for over a century. But to keep going forward tomorrow, we know we have to push the boundaries today. We prioritize rewarding those who embrace change with a package that reflects how much we value their input.</p><br>The Baker Hughes internal title for this role is: Field Specialist IV - SVS - CTRL </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><u><b>Job Summary</b></u> <br></span><p>The Senior Project Engineer ensures that projects are completed in a safely manner and meets the project objectives through planning and scheduling, resource allocation and management, cost control, technical direction, compliance with quality standards and procedures. Assists the Project Manager in overseeing the Operational Management areas: Human Resource Management, Project Planning, Cost Management, Time Management, Quality Management, Contract Administration, Safety Management, Subcontract management, Material Procurement and Management of all Projects System Assembly</p><br> <br><br><u><b>Job Responsibilities 1</b></u> <br><p>Manage and oversee projects from conception to completion, ensuring adherence to schedules, budgets, and quality standards.</p><br> <p>Coordinate with architects, engineers, contractors, and subcontractors to develop project plans, specifications, and timelines.</p><br> <p>Supervise activities on-site, including scheduling labor, materials, and equipment to ensure efficient project execution.</p><br> <p>Monitor project progress, identifying potential delays, risks, and issues, and implementing corrective actions as necessary.</p><br> <p>Conduct regular inspections and quality control checks to ensure compliance with design specifications and regulatory requirements.</p><br> <p>Prepare and review project documentation, including contracts, change orders, and progress reports, to maintain accurate records.</p><br> <p>Communicate regularly with clients, stakeholders, and project teams to provide updates on project status, milestones, and deliverables.</p><br> <p>Manage project budgets and expenditures, tracking costs and forecasting expenses to ensure financial objectives are met.</p><br> <p>Identify opportunities for process improvements and efficiencies to enhance project delivery and outcomes.</p><br> <p>Ensure compliance with safety regulations and promote a culture of safety awareness among project teams and subcontractors.</p><br> <p>Support the implementation of HSE initiatives, participate in safety awareness activities, and contribute to incident reporting and resolution in alignment with company and IMS policies</p><br> <br><br><u><b>Job Responsibilities 2</b></u> <br><br><b>Additional Responsibilities 3</b> <br><br><u><b>Job Knowledge &amp; Skills</b></u> <br><p>n-depth understanding of construction principles, methods, and materials.</p><br> <p>Proficiency in project management software and tools for scheduling, budgeting, and documentation.</p><br> <p>Strong communication skills to effectively liaise with stakeholders, subcontractors, and project teams.</p><br> <p>Problem-solving abilities to address challenges and obstacles encountered during project execution.</p><br> <p>Leadership skills to effectively manage teams and coordinate construction activities on-site.</p><br> <p>ERP knowledge preferably SAP functional skills are a requirement to be successful in this role.</p><br><br><br><u><b>Job Experience</b></u> <br><p>Minimum 8 year(s) working experience, 5 year(s) relevant working experience, 2 year (s) GCC is a plus</p><br><br><br><u><b>Competencies</b></u> <br>Agility<br>AI Fluency<br>Resilience<br>Quality<br>Leadership<br>Contingency Workforce Management L3<br>Commercial &amp; Residential Construction L3<br>Project Planning L3<br>Construction Budgeting L3<br>Project Management L3<br><br><br><u><b>Education</b></u> <br>Profesional degree in MMUP Engineer Registration (UPDA)<br>Bachelor's Degree in Civil Engineering or any related field<br><br><br><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Support the team member of HSE team to prepare deliverable HSE documents such as HSE Plan and other relevant procedures for Project execution.</p><p>Support the HSE team leader for project Proposals in mostly overseas. Review &amp; prepares pre-qualification response to questionnaires documents from the client, ITB (Instruction to Bidder) review, and summary at the proposal stage. Prepare HSE documentation for clients/projects as per the requirements Support in providing training to HSE team member in project PQ (Project Pre-Qualification) and Project Proposal handling including Project Execution set up concerning Project HSE Management. Develop, implement and improve HSE management systems, processes and procedures to support business operations in accordance with ISO 45001 Develop HSE Alert &amp; HSE Risk Assessment for overseas project sites safety awareness Prepares weekly, quarterly, annual and other HSE related report covering the overseas project sites HSE activities. Support overseas projects with the identification of environmental aspects and determining the project objectives and target Carryout HSE training courses when required</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><h2>Knowledge And Qualifiction</h2><p>Degree holder in Engineering preferably major in Safety or Mechanical, Civil, Electrical, Industrial or Chemical</p><p>At least Ten (10) years experienced in field as an HSE engineer</p><p>At least Two (2) years experienced in PQ/ITB Document Process</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br>About the opportunity<br><p><strong>Role Summary</strong></p><br><br><p>We are seeking a versatile and highly organized Operations &amp; Performance Admin Engineer to join the talabat mart (tMart) team. This hybrid role bridges technical facilities management with data-driven operational performance administration. On the engineering side, you will oversee the maintenance, procurement support, and supplier supervision for dark store facilities, ensuring critical infrastructure like cold chain systems (chillers/freezers) and electrical networks remain fully operational. On the administration side, you will dedicate focus to monitoring, tracking, and reporting the operational health of the dark stores, reviewing ground-level efficiency metrics, and delivering structured compliance dashboards to ensure seamless 30-minute delivery execution.</p><br><br><p><strong>What’s On Your Plate?</strong></p><br><br><p><strong>Engineering &amp; Facilities Management:</strong></p><br><br><ul><li><p>Infrastructure Maintenance: Proactively identify, diagnose, and manage the maintenance and repair needs of essential store infrastructure, including industrial chillers, freezers, HVAC/AC systems, electrical distribution networks, and general facilities.</p><br><br></li><li><p>Procurement Documentation: Formulate highly accurate and detailed Scope of Work (SOW) documents and Bill of Quantities (BOQ) for new equipment purchases, facility upgrades, and engineering services.</p><br><br></li><li><p>Supplier Supervision: Supervise on-site third-party contractors and service providers during engineering installations, routine maintenance, and emergency repairs, enforcing strict quality and safety standards.</p><br><br></li><li><p>Handover &amp; Receiving: Conduct technical inspections and serve as the final authority for the formal receiving and handover of newly executed engineering projects, facilities, or physical assets.</p><br><br></li></ul><p><strong>Performance Administration:</strong></p><br><br><ul><li><p>Real-Time Order Flow Monitoring: Maintain a regular order-flow monitoring schedule on the Shopper platform, and actively inform the relevant store team via communication groups in case of any delays in assigning or preparing orders.</p><br><br></li><li><p>Nightly Sales Tracking: Create and publish structured sales update tables every night at 7:00 PM, 9:00 PM, 11:00 PM, and 12:15 AM to keep the team informed on performance milestones.</p><br><br></li><li><p>Picker Performance Analytics: Check picker performance at the granular order level, calculate efficiency averages, and prepare comprehensive reports to help team leaders optimize speed and accuracy.</p><br><br></li><li><p>Customer Feedback Administration: Follow up with the account advisor to aggregate, categorize, and report back on direct customer feedback to identify service delivery bottlenecks.</p><br><br></li><li><p>Operational Sheet Management: Maintain and systematically update the central operations Google Sheet for all immediate store-level updates, operational tracking parameters, and system notifications.</p><br><br></li><li><p>In-App Quality Control Audits: Perform weekly systematic audits of images on the talabat App, flagging discrepancies, and proactively uploading missing visual assets to guarantee catalog completeness.</p><br><br></li><li><p>Barcode Error Tracking: Identify and log non-working barcodes using the specialized operations tracking sheet to minimize order picking delays.</p><br><br></li><li><p>Store Invoice &amp; Compliance Audits: Monitor, track, and verify the physical and digital invoices uploaded directly by the store branches to ensure operational data integrity.</p><br><br></li></ul><br>What you need to be successful<br><ul><li><p>Education &amp; Experience: Bachelor’s degree in Mechanical, Electrical, or Industrial Engineering, or a highly related technical field, combined with at least 3+ years of experience across data tracking, performance reporting, facilities engineering, or administrative operations.</p><br><br></li><li><p>Technical Facility Skills: Strong hands-on or supervisory experience identifying maintenance needs for commercial refrigeration (chillers/freezers), HVAC networks, and electrical systems. Proven ability to draft professional SOW and BOQ documents.</p><br><br></li><li><p>Analytical &amp; Tooling Proficiency: Highly data-oriented and structured, with an advanced proficiency in Google Sheets/Excel. Comfortable managing high-volume operational dashboards and catching subtle metric anomalies.</p><br><br></li><li><p>Execution &amp; Communication: Strong communication and reporting skills to seamlessly present daily facilities statuses and weekly performance summaries directly to Operations Management.</p><br><br></li></ul><br>Who we are<br><p>Since launching in Kuwait in 2004, talabat, the leading on-demand food and Q-commerce app for everyday deliveries, has been offering convenience and reliability to its customers. talabat’s local roots run deep, offering a real understanding of the needs of the communities we serve in eight countries across the region.<br> <br> We harness innovative technology and knowledge to simplify everyday life for our customers, optimize operations for our restaurants and local shops, and provide our riders with reliable earning opportunities daily.<br> <br> At talabat, we foster an innovative environment where our talabaty employees can strive to create a positive impact across the region through the use of our platform.</p><br><br> <br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Company Description<br><p>Since launching in Kuwait in 2004, talabat, the leading on-demand food and Q-commerce app for everyday deliveries, has been offering convenience and reliability to its customers. talabat’s local roots run deep, offering a real understanding of the needs of the communities we serve in eight countries across the region.<br> <br> We harness innovative technology and knowledge to simplify everyday life for our customers, optimize operations for our restaurants and local shops,&nbsp; and provide our riders with reliable earning opportunities daily.<br> <br> At talabat, we foster an innovative environment where our talabaty employees can strive to create a positive impact across the region through the use of our platform.</p><br><br>Job Description<br><p><strong>Role Summary</strong></p><br><p>We are seeking a versatile and highly organized Operations &amp; Performance Admin Engineer to join the talabat mart (tMart) team. This hybrid role bridges technical facilities management with data-driven operational performance administration. On the engineering side, you will oversee the maintenance, procurement support, and supplier supervision for dark store facilities, ensuring critical infrastructure like cold chain systems (chillers/freezers) and electrical networks remain fully operational. On the administration side, you will dedicate focus to monitoring, tracking, and reporting the operational health of the dark stores, reviewing ground-level efficiency metrics, and delivering structured compliance dashboards to ensure seamless 30-minute delivery execution.</p><br><p><strong>What’s On Your Plate?</strong></p><br><p><strong>Engineering &amp; Facilities Management:</strong></p><br><ul><li><p>Infrastructure Maintenance: Proactively identify, diagnose, and manage the maintenance and repair needs of essential store infrastructure, including industrial chillers, freezers, HVAC/AC systems, electrical distribution networks, and general facilities.</p><br></li><li><p>Procurement Documentation: Formulate highly accurate and detailed Scope of Work (SOW) documents and Bill of Quantities (BOQ) for new equipment purchases, facility upgrades, and engineering services.</p><br></li><li><p>Supplier Supervision: Supervise on-site third-party contractors and service providers during engineering installations, routine maintenance, and emergency repairs, enforcing strict quality and safety standards.</p><br></li><li><p>Handover &amp; Receiving: Conduct technical inspections and serve as the final authority for the formal receiving and handover of newly executed engineering projects, facilities, or physical assets.</p><br></li></ul><p><strong>Performance Administration:</strong></p><br><ul><li><p>Real-Time Order Flow Monitoring: Maintain a regular order-flow monitoring schedule on the Shopper platform, and actively inform the relevant store team via communication groups in case of any delays in assigning or preparing orders.</p><br></li><li><p>Nightly Sales Tracking: Create and publish structured sales update tables every night at 7:00 PM, 9:00 PM, 11:00 PM, and 12:15 AM to keep the team informed on performance milestones.</p><br></li><li><p>Picker Performance Analytics: Check picker performance at the granular order level, calculate efficiency averages, and prepare comprehensive reports to help team leaders optimize speed and accuracy.</p><br></li><li><p>Customer Feedback Administration: Follow up with the account advisor to aggregate, categorize, and report back on direct customer feedback to identify service delivery bottlenecks.</p><br></li><li><p>Operational Sheet Management: Maintain and systematically update the central operations Google Sheet for all immediate store-level updates, operational tracking parameters, and system notifications.</p><br></li><li><p>In-App Quality Control Audits: Perform weekly systematic audits of images on the talabat App, flagging discrepancies, and proactively uploading missing visual assets to guarantee catalog completeness.</p><br></li><li><p>Barcode Error Tracking: Identify and log non-working barcodes using the specialized operations tracking sheet to minimize order picking delays.</p><br></li><li><p>Store Invoice &amp; Compliance Audits: Monitor, track, and verify the physical and digital invoices uploaded directly by the store branches to ensure operational data integrity.</p><br></li></ul><br>Qualifications<br><ul><li><p>Education &amp; Experience: Bachelor’s degree in Mechanical, Electrical, or Industrial Engineering, or a highly related technical field, combined with at least 3+ years of experience across data tracking, performance reporting, facilities engineering, or administrative operations.</p><br></li><li><p>Technical Facility Skills: Strong hands-on or supervisory experience identifying maintenance needs for commercial refrigeration (chillers/freezers), HVAC networks, and electrical systems. Proven ability to draft professional SOW and BOQ documents.</p><br></li><li><p>Analytical &amp; Tooling Proficiency: Highly data-oriented and structured, with an advanced proficiency in Google Sheets/Excel. Comfortable managing high-volume operational dashboards and catching subtle metric anomalies.</p><br></li><li><p>Execution &amp; Communication: Strong communication and reporting skills to seamlessly present daily facilities statuses and weekly performance summaries directly to Operations Management.</p><br></li></ul><br><br> </div>