Automotive Engineer Jobs in Iraq

<p>Rutledge group started out in 1981 provides quality safety services to the oil &amp; gas, petrochemical, specialty chemicals, engineering and construction industries. We provide total safety management support services on site, in areas of safety H2S, HSE, training, rental of safety equipment, service and maintenance of equipment.</p><p>&nbsp;</p><p><strong>Job Description</strong></p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Conduct well site survey for offshore, onshore installations, prepare schematics of both gas detection and breathing air cascade system, Installation of fixed-point sensors, wireless gas detection based on client well plan.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Supervise the H2S Unit / Container installation at the site and rig up/ setting up all necessary fixed or remote gas detection systems, alarms and ensure their safety aspects.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Continuously monitor all the H2S equipment, the gas detection system and H2S alarm control panel on the site</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Maintain, Service and Testing of all in-house and client equipment to ensure they are in ready-to-go state.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Trouble shoot, repair, test, and commission the full range of safety equipment in the field.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Monitor and record H2S gas concentration on various activities such as Well Test Operations, Sour gas flaring, Coring, DST, TCP operations.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Gas sampling such as H2S, LEL, CO2, SO2 and other gases if and as required.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Conduct On site H2S Safety Induction, trainings, conduct emergency safety drills and ensure personnel proficiency in usage of the Breathing Equipment.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Prepare site specific H2S induction training if required by Client.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Participate safety meetings and toolbox talks.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Participate in STOP card &amp; NUHS programme</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Prepare Contingency Plans, Emergency Response Plan, Equipment maintenance report on equipment and internal audits.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Discuss the observations and areas of improvements with onsite HSE and Company’s representatives.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Conduct regular Simulated Drills (i.e.H2S Drills, Man Down Drill, Muster Drill as per Company’s guidelines and schedules.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Supervise the emergency situations because of H2S release, provide recommendations to handle the situations and suggest the best practice methods to work under mask to control the situations for different operations e.g. well control etc.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Prepare and submit the field Rutledge ISO reports on inspections, repairs, calibrations, testing, training records, inventories, drills etc. to Company representative and operations manager as required.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Assist in confined space entry &amp; gas testing.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Prepare and submit the Customer Satisfaction Quality Questionnaire.</p><p><strong>Requirements</strong></p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Candidate must possess at least a Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Petroleum/Oil/Gas), Geology/Geophysics or equivalent.</p><p>·&nbsp; &nbsp; &nbsp; &nbsp; Preferable with 2-5 years working experience in the oil &amp; gas industry or petrochemical facilities.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Previous work experience as an offshore rig personnel such as electrical, drilling, mudlogging or safety is a definite advantage.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Candidates without prior experience but have worked in drilling well sites or petrochemical facilities are welcome to apply.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Able to stay at Client’s well sites for an extended duration.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; A positive attitude with good problem-solving skills, creativity, displaying initiative and willing to work in a multi-cultural environment.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Capable of representing Company before Clients and for business development.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Bilingual in English and Arabic.</p>

<p><h4>E&I Engineer</h4> <p>KBR Sustainable Technology Solutions (STS) provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design capabilities, and smart solutions to optimize planned and operating assets.</p> <p>Responsible for start-up and plant operations activities including equipment and system checkout, inspection for proper installation, review for correct design, and calculation of expected system and equipment operating parameters under temporary start-up conditions. Coordinates start-up operations, including the direction of craft, and all other start-up activities such as flushing, chemical cleaning, and initial equipment and system operation. Coordinates performance tests and calculates test results and heat balances. Performs calculations required to properly evaluate design changes, provides engineering reports for the engineering department to assist in design change preparation. Works with client at the site.</p> <p>Under general supervision, performs all conventional aspects of the functional area subject matter. Devises new approaches to problems encountered. Plans, schedules, and conducts work requiring judgment in the independent evaluation, selection, and adaptation of engineering techniques, procedures, and criteria. Performs work which involves conventional engineering practice but may include a variety of complex features such as conflicting design requirements, unsuitability of conventional materials, and difficult coordination requirements. Provides technical guidance to designers and less experienced engineers.</p> <p>Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability, or operations. Skills are typically acquired through an undergraduate degree in engineering and a minimum of 10 years related experience, with average experience ranging from 10-15 years.</p></p><p></p>

<p><h4>E&I Engineer</h4> <p>KBR Sustainable Technology Solutions (STS) provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design capabilities, and smart solutions to optimize planned and operating assets.</p> <p>Responsible for start-up and plant operations activities including equipment and system checkout, inspection for proper installation, review for correct design, and calculation of expected system and equipment operating parameters under temporary start-up conditions. Coordinates start-up operations, including the direction of craft, and all other start-up activities such as flushing, chemical cleaning, and initial equipment and system operation. Coordinates performance tests and calculates test results and heat balances. Performs calculations required to properly evaluate design changes, provides engineering reports for the engineering department to assist in design change preparation. Works with client at the site.</p> <p>Under general supervision, performs all conventional aspects of the functional area subject matter. Devises new approaches to problems encountered. Plans, schedules, and conducts work requiring judgment in the independent evaluation, selection, and adaptation of engineering techniques, procedures, and criteria. Performs work which involves conventional engineering practice but may include a variety of complex features such as conflicting design requirements, unsuitability of conventional materials, and difficult coordination requirements. Provides technical guidance to designers and less experienced engineers.</p> <p>Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability, or operations. Skills are typically acquired through an undergraduate degree in engineering and a minimum of 10 years related experience, with average experience ranging from 10-15 years.</p></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Reporting Engineer<br><br><br><p><b><span>Job</span></b> <b><span>Descr</span></b><b><span>i</span></b><b>p<span>ti</span><span>on</span></b></p><br><br><p><b><span>D</span></b><b>ivi<span>s</span>i<span>on</span> <span>:</span></b> <span>C</span>SS<span>P</span> (Ra<span>t</span><span>awi Hub</span> – Iraq)</p><br><br><p><b><span>D</span></b><b>i<span>r</span><span>ecti</span><span>o</span><span>n</span> : </b><span>P</span>CM&nbsp;</p><br><br><br><p><b><span>J</span></b><b>ob <span>t</span>i<span>t</span><span>le</span></b>:<b><span>R</span></b><b><span>eportin</span></b><b><span>g </span></b><b>En<span>g</span><span>ineer</span></b></p><br><br><br><p><b><span>Si</span></b><b><span>t</span></b><b>u<span>a</span><span>t</span><span>ion in org</span><span>a</span><span>niza</span><span>t</span><span>ion</span></b></p><br><br><p><span>Repor</span><span>t</span>in<span>g</span> <span>E</span>ngineer <span>position</span> is <span>within</span> <span>t</span>he <span>P</span>ro<span>j</span>e<span>c</span><span>t</span> <span>C</span><span>ontrol</span> <span>Or</span><span>g</span><span>anizatio</span><span>n</span> <span>o</span>f <span>t</span>he <span>P</span>ro<span>j</span>e<span>c</span><span>t</span> <span>repor</span><span>t</span>in<span>g</span> <span>t</span>o <span>t</span>he <span>P</span><span>lannin</span><span>g</span> <span>&amp;</span> <span>Repor</span><span>t</span>in<span>g</span> <span>M</span>anager.&nbsp;</p><br><br><br><p><b><span>J</span></b><b>ob dim<span>e</span>n<span>s</span><span>ions</span></b></p><br><br><p><span>The Repor</span><span>t</span>in<span>g</span> <span>E</span><span>ngineer is respons</span><span>i</span><span>ble f</span><span>o</span>r <span>c</span>olle<span>c</span><span>t</span>in<span>g</span>, <span>analyzin</span><span>g</span><span>, and presentin</span><span>g</span><span> pro</span><span>j</span>e<span>c</span><span>t</span><span> perfor</span><span>m</span>an<span>c</span>e da<span>t</span><span>a to supp</span><span>o</span>r<span>t</span> de<span>c</span><span>ision</span><span>-</span><span>making and ensure </span><span>t</span><span>ransp</span><span>a</span>ren<span>c</span>y a<span>c</span><span>ross all ph</span><span>as</span><span>es of </span><span>t</span>he <span>C</span>SS<span>P</span> <span>P</span>ro<span>j</span>e<span>c</span><span>t</span><span>. The role </span><span>c</span><span>ontributes to </span><span>t</span>he <span>t</span><span>imely and</span> a<span>cc</span><span>urate delivery of in</span><span>t</span><span>ernal and external re</span><span>p</span><span>or</span><span>t</span><span>s, dash</span><span>b</span><span>oards, and K</span><span>P</span><span>Is, in</span><span>c</span>luding <span>H</span>S<span>E</span><span> and risk</span><span>-</span>related metri<span>c</span>s. </p><br><br><p><span>In addition, the Repor</span><span>t</span>in<span>g</span> <span>E</span><span>ngineer is respons</span><span>i</span><span>ble for</span> su<span>p</span><span>por</span><span>t</span>in<span>g</span><span> pro</span><span>j</span>e<span>c</span><span>t</span> di<span>g</span><span>italization and inf</span><span>o</span><span>rmation managem</span><span>e</span>nt initia<span>t</span><span>ives, ensurin</span><span>g</span> <span>t</span><span>he effe</span><span>c</span><span>t</span>ive <span>g</span><span>overnan</span><span>c</span>e, quality, a<span>cc</span><span>essibility, and in</span><span>t</span>e<span>g</span><span>ration of p</span><span>r</span>o<span>j</span>e<span>c</span><span>t</span><span> information a</span><span>c</span><span>ross</span> all <span>par</span><span>t</span>i<span>c</span>ipatin<span>g</span><span> or</span><span>ga</span><span>nizations.</span> <span>The position</span> <span>oversees </span><span>t</span>he In<span>f</span><span>ormation </span><span>M</span><span>anagement Assis</span><span>t</span>an<span>t</span> <span>f</span>un<span>ct</span><span>ion and pro</span><span>m</span>o<span>t</span>es the <span>effi</span><span>c</span>ien<span>t</span><span> use of di</span><span>g</span>ital <span>c</span><span>ollab</span><span>o</span><span>ration pla</span><span>t</span>f<span>o</span><span>rms, re</span><span>p</span><span>or</span><span>t</span>in<span>g</span> sys<span>t</span><span>ems, do</span><span>c</span>umen<span>t</span> mana<span>g</span>ement <span>t</span><span>ools, and dat</span><span>a</span><span>-</span><span>sharin</span><span>g</span> <span>solu</span><span>t</span><span>ions </span><span>t</span><span>o enhan</span><span>c</span><span>e pro</span><span>j</span>e<span>c</span><span>t</span> exe<span>c</span><span>ution and s</span><span>t</span>a<span>k</span><span>eholder</span> alignmen<span>t</span>. </p><br><br><p><span>The role a</span><span>ct</span><span>s as a fo</span><span>c</span><span>al po</span><span>i</span>nt be<span>t</span><span>ween Pro</span><span>j</span>e<span>c</span><span>t</span> <span>C</span><span>ontrols, Engineerin</span><span>g</span>, <span>C</span><span>ons</span><span>t</span>ru<span>ct</span><span>ion, HS</span><span>E</span>, <span>C</span><span>ontra</span><span>ct</span><span>ors, and </span><span>C</span>ompany&nbsp;<br>s<span>t</span><span>akeholders </span><span>t</span><span>o ensure </span><span>c</span><span>ons</span><span>i</span>s<span>t</span>en<span>c</span>y, <span>t</span>ra<span>c</span>eabili<span>t</span><span>y, and reliability of pro</span><span>j</span>e<span>c</span><span>t</span><span> data and info</span><span>r</span><span>mation throughout </span><span>t</span>he p<span>r</span>o<span>j</span>e<span>c</span>t <span>life</span><span>c</span>y<span>c</span>le.&nbsp;</p><br><br><p><span>Iraq </span><span>C</span><span>ommon Sea</span><span>w</span><span>ater Supply </span><span>P</span>ro<span>j</span>e<span>c</span><span>t</span> (<span>C</span>SS<span>P</span>) in<span>t</span>ends <span>t</span><span>o provide </span><span>t</span>rea<span>t</span><span>ed seawater </span><span>t</span>o <span>t</span><span>he oil fie</span><span>l</span><span>ds in southe</span><span>r</span><span>n Ir</span><span>a</span>q&nbsp;<br><span>(for in</span><span>j</span>e<span>c</span><span>t</span><span>ion). </span><span>C</span>SS<span>P</span> is <span>c</span><span>omposed</span> <span>of water </span><span>p</span><span>ipelines</span> <span>w</span>hi<span>c</span><span>h are par</span><span>t</span><span> of Ba</span><span>s</span><span>ra Oil </span><span>C</span><span>ompany (BO</span><span>C</span>) s<span>c</span>ope <span>o</span><span>f w</span><span>o</span>rk, a<span>n</span>d&nbsp;<br><span>t</span>he Wa<span>t</span><span>er Infras</span><span>t</span>ru<span>ct</span>ure <span>P</span>ro<span>j</span>e<span>c</span><span>t</span><span> (WIP), previously n</span><span>a</span>m<span>e</span><span>d STF (Se</span><span>a</span><span>water </span><span>T</span>rea<span>t</span>men<span>t</span> Fa<span>c</span><span>ilities). The WI</span><span>P</span> <span>w</span><span>ill be lo</span><span>c</span><span>ated</span></p><br><br><p><span>on the west side of </span><span>t</span><span>he Khor</span> Al <span>Z</span><span>ubair, ups</span><span>t</span><span>ream of </span><span>t</span>he <span>p</span><span>or</span><span>t</span><span> of Umm </span><span>Q</span>a<span>s</span>r<span>. </span> </p><br><br><br><p><span>The ma</span><span>j</span><span>or </span><span>c</span><span>omponents </span><span>o</span>f <span>t</span>he WI<span>P</span> in<span>c</span><span>lude seawater in</span><span>t</span><span>a</span><span>ke and outfall s</span><span>t</span>ru<span>ct</span><span>ures, materi</span><span>a</span>l o<span>f</span><span>floadin</span><span>g</span> fa<span>c</span>ility, <span>seawater </span><span>c</span><span>larifi</span><span>c</span>ation, <span>fil</span><span>t</span><span>ration and de</span><span>o</span>xy<span>g</span>enatin<span>g</span><span> pro</span><span>c</span><span>esses, shippin</span><span>g</span> pum<span>p</span><span>s, a fuel </span><span>g</span><span>as pipel</span><span>i</span><span>ne, power </span><span>g</span>enerat<span>i</span>on, <span>utilities and non</span><span>-</span><span>pro</span><span>c</span>ess. </p><br><br><p><span>The budge</span><span>t</span><span> of </span><span>t</span>he WI<span>P</span> is <span>c</span><span>ir</span><span>c</span>a $3Bln.</p><br><br><p><span>The Repor</span><span>t</span>in<span>g</span> <span>E</span><span>ngineer is expe</span><span>c</span><span>t</span>ed <span>t</span>o <span>c</span>ommen<span>c</span>e du<span>t</span><span>ies in </span><span>t</span>he 3<span>rd</span> <span>Qt</span><span>r 2026 and will be b</span><span>a</span><span>sed in Basr</span><span>a</span>.</p><br><br><br><p><b><span>A</span></b><b>ctivities</b></p><br><br><br><p><b>1<span>-</span></b><b>Re<span>por</span><span>ting &amp; </span><span>A</span>n<span>a</span><span>ly</span><span>s</span>is </b></p><br><br><ul><li><span>C</span>olle<span>c</span><span>t</span><span> and validate pro</span><span>g</span><span>ress data from va</span><span>r</span><span>ious </span><span>p</span>ro<span>j</span>e<span>c</span><span>t</span> dis<span>c</span><span>iplines (en</span><span>g</span><span>ineerin</span><span>g</span><span>, pro</span><span>c</span>urement, <span>c</span><span>ons</span><span>t</span>ru<span>ct</span>ion,&nbsp;<span>HS</span><span>E</span>, e<span>tc</span>.)&nbsp;</li><li><span>P</span><span>repare and update weekly/monthly </span><span>p</span>ro<span>g</span><span>ress re</span><span>p</span><span>or</span><span>t</span>s, <span>d</span><span>ashboards, </span><span>a</span>nd exe<span>c</span><span>utive summarie</span><span>s</span><span>.</span>&nbsp;</li><li><span>Tra</span><span>c</span><span>k and rep</span><span>o</span>r<span>t</span><span> key perfor</span><span>m</span>an<span>c</span>e indi<span>c</span><span>ators (K</span><span>P</span><span>Is), in</span><span>c</span>l<span>u</span>ding physi<span>c</span><span>al pro</span><span>g</span><span>ress, </span><span>p</span><span>rodu</span><span>ct</span><span>ivity, and fore</span><span>c</span>as<span>t</span>ed&nbsp;<span>c</span><span>omple</span><span>t</span>ion dates.&nbsp;</li><li><span>Suppor</span><span>t</span> <span>t</span>he <span>P</span><span>lannin</span><span>g</span><span> &amp; Repor</span><span>t</span>in<span>g</span> <span>M</span><span>anager in prepar</span><span>i</span><span>ng presentations f</span><span>o</span>r in<span>t</span><span>ernal and extern</span><span>a</span>l s<span>t</span>akeholders.</li><li><span>E</span><span>nsure </span><span>c</span><span>onsis</span><span>t</span>en<span>c</span>y and <span>t</span>ra<span>c</span>eabili<span>t</span><span>y of repor</span><span>t</span>in<span>g</span> do<span>c</span>um<span>e</span>ntation a<span>c</span><span>ross all p</span><span>r</span>o<span>j</span>e<span>c</span><span>t</span><span> phases</span><span>.</span>&nbsp;</li></ul><p><b>2<span>-</span></b><b>HS<span>E</span><span> &amp; Ri</span><span>s</span><span>k Rep</span><span>or</span>ting </b></p><br><br><ul><li><span>M</span><span>oni</span><span>t</span><span>or and repor</span><span>t</span> HS<span>E</span><span> perfo</span><span>r</span>man<span>c</span>e indi<span>c</span><span>ators (e.</span><span>g</span>., <span>L</span>T<span>I</span><span>s, TRIR, safe</span><span>t</span><span>y observa</span><span>t</span>io<span>n</span><span>s) in </span><span>c</span>oo<span>r</span><span>dina</span><span>t</span>ion <span>w</span>ith&nbsp;<span>HS</span><span>E</span> <span>t</span>eams.&nbsp;</li><li><span>M</span><span>aintain and update HS</span><span>E</span><span> dashboa</span><span>r</span><span>ds and in</span><span>t</span>e<span>g</span><span>rate safe</span><span>t</span>y me<span>t</span>ri<span>c</span>s in<span>t</span><span>o overall pro</span><span>j</span>e<span>c</span><span>t</span><span> repor</span><span>t</span>in<span>g</span><span>.</span>&nbsp;</li><li><span>Assis</span><span>t</span> in <span>c</span><span>ompil</span><span>i</span><span>ng and presentin</span><span>g</span><span> periodi</span><span>c</span> r<span>i</span><span>sk asses</span><span>s</span>men<span>t</span><span>s and mi</span><span>t</span>igation tra<span>c</span>king<span>.</span>&nbsp;</li></ul><p><b>3<span>-</span></b><b>Sy<span>s</span>tem<span>s</span><span> &amp; T</span><span>oo</span>ls </b></p><br><br><ul><li><span>Use repor</span><span>t</span>in<span>g</span> <span>t</span><span>ools </span><span>s</span>u<span>c</span>h as <span>P</span><span>ower BI, </span><span>E</span>x<span>c</span><span>el, Word, Powe</span><span>r</span><span>P</span><span>oin</span><span>t</span><span>, and pro</span><span>j</span>e<span>c</span><span>t</span> <span>c</span><span>ontrol sys</span><span>t</span>ems <span>t</span>o <span>g</span>enerate&nbsp;<span>visualizations </span><span>a</span><span>nd repor</span><span>t</span><span>s</span><span>.</span>&nbsp;</li><li><span>E</span><span>nsure da</span><span>t</span>a inte<span>g</span><span>rity and alignmen</span><span>t</span> be<span>t</span><span>ween plannin</span><span>g</span>, <span>c</span><span>os</span><span>t</span> <span>c</span><span>ontrol, and repor</span><span>t</span>in<span>g</span> sys<span>t</span>em<span>s</span><span>.</span>&nbsp;</li></ul><br><p><b>4<span>-</span></b><b><span>Do</span></b><b>c<span>u</span>me<span>n</span>t<span>a</span><span>tio</span><span>n</span> &amp; C<span>o</span><span>mplia</span><span>n</span>c<span>e</span> </b></p><br><br><ul><li><span>E</span><span>nsure </span><span>c</span><span>omplian</span><span>c</span><span>e with To</span><span>t</span>al<span>E</span>ner<span>g</span>ies, BO<span>C</span>, and <span>P</span>ro<span>j</span>e<span>c</span><span>t</span><span> s</span><span>t</span><span>andards </span><span>f</span><span>or rep</span><span>o</span>r<span>t</span>in<span>g</span><span> pro</span><span>c</span><span>edure</span><span>s</span>&nbsp;</li><li><span>Suppor</span><span>t</span><span> audits, revi</span><span>e</span><span>ws, and p</span><span>r</span>o<span>j</span>e<span>c</span><span>t</span><span> evaluations by providing a</span><span>cc</span><span>urate and timely repor</span><span>t</span>in<span>g</span> do<span>c</span>umen<span>t</span>atio<span>n</span>&nbsp;</li><li><span>C</span><span>oordina</span><span>t</span><span>e with internal dep</span><span>a</span>r<span>t</span>men<span>t</span><span>s (</span><span>P</span><span>lannin</span><span>g</span>, <span>C</span><span>os</span><span>t</span> <span>C</span><span>ontrol, </span><span>C</span><span>ontra</span><span>ct</span><span>s, HS</span><span>E</span>) <span>t</span><span>o ensure rep</span><span>o</span>r<span>t</span>in<span>g</span> a<span>cc</span><span>ura</span><span>c</span>y<span>.</span>&nbsp;<br><b>5<span>-</span> <span>In</span><span>fo</span><span>r</span>m<span>a</span><span>tio</span><span>n</span> M<span>an</span>ageme<span>n</span>t &amp; <span>D</span><span>igit</span><span>a</span>liz<span>a</span>ti<span>o</span><span>n</span> </b></li><li><span>L</span><span>ead pro</span><span>j</span>e<span>c</span><span>t</span><span> information management and di</span><span>g</span><span>italization</span> a<span>ct</span>ivities. </li><li><span>Supervise </span><span>t</span><span>he Inf</span><span>o</span><span>rmation </span><span>M</span><span>anagement Assis</span><span>t</span>an<span>t</span> and o<span>v</span><span>ersee pro</span><span>j</span>e<span>c</span><span>t</span><span> information, data, and</span> re<span>c</span>ords&nbsp;management. </li><li><span>E</span><span>nsure infor</span><span>m</span><span>ation quali</span><span>t</span>y, <span>c</span><span>onsis</span><span>t</span>en<span>c</span>y, a<span>cc</span><span>essibility, and </span><span>t</span>ra<span>c</span>eabili<span>t</span>y a<span>c</span><span>ross all pro</span><span>j</span>e<span>c</span><span>t</span> s<span>t</span>akeholders. </li><li><span>C</span><span>oordina</span><span>t</span><span>e info</span><span>r</span>mation ex<span>c</span>hange be<span>t</span>ween <span>C</span>ompany and <span>C</span><span>ontra</span><span>ct</span>ors. </li><li><span>Suppor</span><span>t</span><span> and optim</span><span>i</span><span>ze di</span><span>g</span>ital <span>t</span><span>ools and p</span><span>l</span><span>atfor</span><span>m</span>s, in<span>c</span>lud<span>i</span><span>ng Share</span><span>P</span><span>oin</span><span>t</span>, <span>P</span><span>ower BI, and do</span><span>c</span>umen<span>t</span> mana<span>g</span>ement sys<span>t</span>ems. </li><li><span>Develop and maintain pro</span><span>j</span>e<span>c</span><span>t</span><span> data repositories, </span><span>d</span><span>ashbo</span><span>a</span><span>rds, and rep</span><span>o</span>r<span>t</span>in<span>g</span> sys<span>t</span>ems<span>.</span>&nbsp;</li></ul><br><p><b>Con<span>t</span>e<span>x</span><span>t</span> <span>a</span>nd <span>e</span>n<span>v</span>ironm<span>e</span><span>nt</span></b></p><br><br><p><span>To</span><span>t</span>al<span>E</span>ner<span>g</span>ies is a<span>ct</span>in<span>g</span> as <span>C</span><span>ontra</span><span>ct</span><span>or</span> <span>t</span>o BO<span>C</span>. <span>A</span>f<span>t</span>er <span>t</span>he <span>c</span><span>omple</span><span>t</span>ion o<span>f</span> <span>t</span>he <span>P</span>ro<span>j</span>e<span>c</span><span>t</span>, <span>t</span>he Fa<span>c</span>ilities <span>will</span> be <span>hande</span><span>d</span> o<span>v</span>er <span>t</span><span>o</span> BO<span>C</span><span> for operation</span><span>.</span>&nbsp;</p><br><br><br><p><b>A<span>cc</span><span>ount</span><span>a</span><span>bili</span><span>t</span>i<span>e</span><span>s</span></b></p><br><br><p><span>The Repor</span><span>t</span>in<span>g</span> <span>E</span><span>ngineer is respons</span><span>i</span><span>ble f</span><span>o</span>r <span>c</span>olle<span>c</span><span>t</span>in<span>g</span><span>, analysin</span><span>g</span><span>, and presentin</span><span>g</span><span> pro</span><span>j</span>e<span>c</span><span>t</span><span> performan</span><span>c</span>e da<span>t</span><span>a w</span><span>h</span>ile <span>ensurin</span><span>g</span><span> effe</span><span>c</span><span>t</span><span>ive inf</span><span>o</span><span>rmation management and di</span><span>g</span>ital <span>c</span><span>ollaboration a</span><span>c</span><span>r</span><span>oss </span><span>t</span>he <span>C</span>SS<span>P</span> <span>P</span>ro<span>j</span>e<span>c</span><span>t</span>. The role drives <span>repor</span><span>t</span>in<span>g</span> ex<span>c</span>ellen<span>c</span><span>e, suppor</span><span>t</span><span>s pro</span><span>j</span><span>e</span><span>ct</span> di<span>g</span><span>italization ini</span><span>t</span>i<span>a</span><span>t</span><span>ives, supervises the Inf</span><span>o</span><span>rmation </span><span>M</span><span>anagement Assis</span><span>t</span>an<span>t</span>, <span>and ensures tha</span><span>t</span><span> pro</span><span>j</span>e<span>c</span><span>t</span><span> informati</span><span>o</span>n is a<span>cc</span>urate, a<span>cc</span><span>essible, in</span><span>t</span>e<span>g</span><span>rated, and available </span><span>t</span><span>o suppor</span><span>t</span> <span>t</span>imely de<span>c</span><span>isio</span><span>n</span>- making a<span>c</span><span>ross all s</span><span>t</span><span>akehold</span><span>e</span><span>rs</span><span>.</span>&nbsp;</p><br><br><br><p><b>Qu<span>a</span><span>li</span><span>f</span>i<span>c</span>a<span>t</span>ion<span>s</span><span> / E</span><span>x</span>p<span>e</span><span>rienc</span><span>e</span> r<span>e</span>quir<span>e</span><span>d</span></b></p><br><br><ul><li>De<span>g</span>ree in <span>E</span><span>ngineerin</span><span>g</span>, Data Analyti<span>c</span><span>s, or related fiel</span><span>d</span>&nbsp;</li><li><span>M</span><span>inimum 5 years </span><span>o</span><span>f experien</span><span>c</span><span>e in pro</span></li></ul> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Wood is recruiting for a Mechanical Engineer to join its Iraq business unit focusing on ensuring that all work is completed without compromise to quality and is delivered according to the project schedule.</p><br><p>This role is a full-time on-site role in Basra, Iraq with travel requirement.</p><br><br> Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy &amp; Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com<br> <b>Diversity Statement&nbsp;</b><br> We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.<br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Wood is looking to recruit an experienced Iraqi National Mechanical Engineer (Rotating Equipment) with survey experience to support Engineering Design.&nbsp;<br> The successful candidate will play a key role in conducting site surveys, supporting engineering studies, overseeing equipment inspections working to client and international standards.</p><br><p>This role is a full-time on-site role in Kirkuk, Iraq&nbsp;</p><br><br> Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy &amp; Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com<br> <b>Diversity Statement&nbsp;</b><br> We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.<br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Wood is looking to recruit an experienced Iraqi National Mechanical Engineer (Rotating Equipment) with survey experience to support Engineering Design.&nbsp;<br> The successful candidate will play a key role in conducting site surveys, supporting engineering studies, overseeing equipment inspections working to client and international standards.</p><br><p>This role is a full-time on-site role in Kirkuk, Iraq&nbsp;</p><br><br> Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy &amp; Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com<br> <b>Diversity Statement&nbsp;</b><br> We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.<br><br>Responsibilities:<br><p>Wood is looking to recruit an experienced Iraqi National Mechanical Engineer (Rotating Equipment) with survey experience to support Engineering Design.&nbsp;<br>The successful candidate will play a key role in conducting site surveys, supporting engineering studies, overseeing equipment inspections working to client and international standards.</p><br><p>This role is a full-time on-site role in Kirkuk, Iraq&nbsp;</p><br><p><i><strong>#Wood #Iraq #Kirkuk #Senior Mechanical Engineer - Rotating</strong></i></p><br><p><strong><u>The role</u></strong></p><br><p>Wood is looking to recruit an experienced Iraqi National Mechanical Engineer (Rotating Equipment) with survey experience to support Engineering Design.&nbsp;<br>The successful candidate will play a key role in conducting site surveys, supporting engineering studies, overseeing equipment inspections working to client and international standards.</p><br><p>This role is a full-time on-site role in Kirkuk, Iraq&nbsp;</p><br><p><strong>Our Clients and Projects&nbsp;</strong></p><br><p><strong>Designing the future. Transforming the world.&nbsp;</strong></p><br><p>Wood is an integral part of operations in Iraq, and we are continuing to grow our footprint across the country. With a 90-year heritage, 10 major contracts and over 850 employees, we have the skills, expertise and asset knowledge to support clients to deliver energy security and decarbonization ambitions.&nbsp;</p><br><p>Wood excels in supporting our clients to deliver complex upstream and midstream oil and gas projects in Iraq delivering maintenance, modifications and engineering solutions. We are committed to decarbonizing existing assets, producing cleaner energy and developing a sustainable national workforce, ensuring the long-term growth of the region.</p><br><p><strong><u>What we can offer:</u></strong></p><br><ul><li><strong>Meaningful and interesting projects</strong> Delivered to high profile clients and complex projects in Iraq&nbsp;</li><li><strong>Commitment to Diversity and Inclusion</strong>; we are an organization actively committed to diversity and inclusion across our business with employee networks committed to giving all employees a voice&nbsp;</li><li><strong>Competitive salary</strong> with regular salary reviews to ensure we are rewarding at the right level in line with the market&nbsp;</li><li><strong>Medical Insurance:&nbsp;</strong>Ensures inpatient and outpatient medical care is available should you require treatment.&nbsp;</li><li><strong>Commitment to continued professional development;</strong> development plans that are tailored to your individual needs and interests&nbsp;</li><li><strong>Global connections</strong>: join experts around the world who are at the leading edge of our industry, shaping the standards of our profession&nbsp;</li><li><strong>Long Service Award:&nbsp;</strong>Wood values the commitment and loyalty of our people. Celebrating Long Service provides an opportunity for the business to demonstrate their appreciation of the hard work, dedication and many years’ services of our employees at 5-year service milestones&nbsp;</li></ul><p><strong><u>Key Responsibilities:</u></strong></p><br><p><strong>Engineering &amp; Survey Activities</strong></p><br><ul><li>Conduct field surveys, site inspections, and data collection for mechanical projects.</li><li>Verify field conditions and prepare survey reports to support engineering design and project execution.</li><li>Coordinate with survey teams, construction contractors, and operations personnel during project development and execution.</li><li>Review survey drawings, alignment sheets, topographical data, and as-built documentation.</li><li>Support feasibility studies, route selection, and constructability assessments.</li></ul><br>Qualifications:<br><p><strong>What makes you remarkable?&nbsp;</strong></p><br><p>At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world’s most critical challenges.&nbsp;&nbsp;</p><br><p><strong>Qualifications</strong></p><br><ul><li>Bachelor’s degree in mechanical engineering or related Engineering discipline.</li><li>Minimum 6 - 10 years of experience in Oil &amp; Gas, Energy, or Infrastructure projects.</li><li>Experience in rotating equipment, and field survey activities.</li><li>Experience working in brownfield and greenfield projects is preferred.</li></ul><p><strong>Preferred Skills</strong></p><br><ul><li>Understanding of API, ASME, and relevant international engineering standards.</li><li>Ability to read and interpret P&amp;IDs, equipment specifications and survey documentation.</li><li>Strong problem-solving and troubleshooting skills.</li><li>Good communication skills in both Arabic and English.</li><li>Ability to work in remote field locations and multicultural environments.</li></ul> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Lead Mechanical Engineer<br><br><span><u><b>Lead Mechanical Engineer</b></u></span><b>EFLD35 - Principal Technical Professional - Field Engineering</b><br>KBR Sustainable Technology Solutions (STS) provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design capabilities, and smart solutions to optimize planned and operating assets.<b><u>Responsibilities:</u> </b>• Day to day delivery of Mechanical Engineering support for site operations.• Deliver safe and effective operations by managing risks, addressing queries and minor modifications activities.• Collaborates with Central Engineering team to identify and define engineering solutions to reduce risk and grow installed production capacity.• Promotes a culture of open safety reporting and continuous improvement.• Provides immediate front line support for Operations and Maintenance teams to resolve minor issues and escalate more significant issues to the Central Engineering Team.• Ensures asset Mechanical Engineering risks (both static and rotating) are understood, controlled, managed and reduced.• Participates in a variety of asset and project risk assessments• Input into anomaly assessment and resolution plans.• Monitors condition monitoring data and health of static and rotating equipment and associated operating envelopes, recording and investigating all Safe Operating Limit excursions.• Monitors static/rotating equipment KPIs and initiates corrective actions as necessary.• Provides Mechanical support to technical MoCs and Engineering Queries• Acts as technical interface with Projects and Modifications organisation, including development of Statement of Requirements (SOR) and Project Initiation Requests (PIRs) and Decision Support Packages (DSP)• Supports delivery of Production Efficiency Improvement and Defect Elimination processes (including simple investigations for deferrals and vulnerabilities)• Identifies production vulnerabilities and optimization opportunities to support production forecast and grow IPC.• Performs follow-up actions and observations from self-verification checks that are related to Mechanical Engineering• Participates in Start Up Readiness and Assurance Reviews• Provides coaching to junior engineers.<br><u><b>Experience, Qualifications &amp; Key Skills</b></u>• Above 10 Years experience in O&amp;G industry (Preferable with IOC’s direct or contract)• Professional (Chartered) Engineer Preferred• Technical degree in Mechanical Engineering or allied engineering subject.• Experience in previous asset engineering / operations support engineering role• Practical exposure to production facilities• Excellent communication, interpersonal and coaching skills• Strong bias for being proactive and getting results• Excellent IT skills – Office suite, document management, applications for CMMS and Change Management.• Contribute to an environment in which all team members are respected regardless of their individual differences and are motivated to improve both their individual and team contributions to achieve desired business results• Skilled in behavior change management<br><u><b>Preferred Qualifications:</b></u><ul><li>Certified Professional Engineer</li></ul><br><p><b>Belong. Connect. Grow. with KBR! </b></p><br><br><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Lead Process Engineer<br><br><p><b>Job Description</b></p><br><br><br><p><b>Position: Lead Process Engineer</b></p><br><br><p><b>Company: KBR </b></p><br><br><p><b>Project: Majnoon</b></p><br><br><p><b>Location: Basra. 28/28 rotation</b></p><br><br><br><p><b><i>"Belong, Connect, Grow, with KBR!</i></b></p><br><br><br><p><b><i>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</i></b></p><br><br><br><p><b><i>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets."</i></b></p><br><br><br><p><b>Position: Lead Process Engineer</b></p><br><br><p><b>Company: KBR </b></p><br><br><p><b>Project: Majnoon</b></p><br><br><p><b>Location: Basra. 28/28 rotation</b></p><br><br><br><p><b>Job Purpose</b></p><br><br><p>The Lead Process Engineer will own the technical integrity and successful delivery of process engineering scope across projects at different stages (Conceptual Studies, Front-End Design (FEED), and Detailed Engineering) for oil and gas field developments, including upstream offshore/onshore, gas treating, and downstream processing, in greenfield and brownfield environments. This role leads a team of engineers within a multidisciplinary project team, ensuring compliance with industry standards and project specifications, driving technical excellence, and fostering the development of Iraqi national staff.</p><br><br><br><p><b>Job Responsibilities</b></p><br><br><ul><li>Lead the preparation and review of process simulations and optimization studies for select/appraise stage projects, and champion the development of Process Flow Schemes with heat and mass balances, equipment sizing, layout, etc., for costing and option selection.</li><li>Own the detailed process engineering deliverables across all design phases, including Process Flow Diagrams, Piping &amp; Instrumentation Diagrams, Equipment Datasheets, Study Reports/Manuals, etc., ensuring alignment with international standards and project requirements.</li><li>Oversee the review of process design work by third parties (vendors) and other offices; champion participation in HAZIDs, HAZOPs, SIL, Hazard Analysis reviews, and audits; ensure timely issue resolution and closure.</li><li>Act as the primary technical interface with clients, communicating complex concepts clearly in both written and verbal formats; manage client expectations and confirm technical commitments.</li><li>Mentor and actively develop Iraqi national staff to fulfill process engineering roles, providing structured on-the-job training, performance feedback, and growth opportunities.</li><li>Ensure adherence to office quality and safety systems; lead the implementation of quality assurance/quality control practices within the process discipline.</li><li>Collaborate with other disciplines to drive on-time, efficient, and safe project delivery; lead technical risk management and issue resolution within the process scope.</li><li>Lead the technical supervision of FEED and Detailed Engineering activities for offshore/onshore greenfield/brownfield projects, ensuring design integrity and constructability.</li><li>Support procurement activities by providing authoritative technical input for equipment selection and vendor evaluation, including evaluation of bid technical clarifications.</li><li>Participate in commissioning and start-up activities, providing seasoned technical support and facilitating smooth handover to operations.</li></ul><br><p><b>Functional Responsibilities</b></p><br><br><ul><li>Maintain and further develop process engineering standards, best practices, and technical governance within the project teams.</li><li>Lead risk assessments and develop comprehensive mitigation strategies for process-related issues; own the risk register for the process discipline.</li><li>Ensure timely delivery of all process engineering deliverables in accordance with project schedules; manage resource planning and workload distribution within the team.</li><li>Provide technical leadership in design reviews, technical compliance, and governance for all process workstreams.</li><li>Support and guide procurement activities with robust technical input for equipment specifications, vendor selection, and qualification.</li><li>Lead commissioning and start-up activities from a process perspective, delivering technical support, commissioning procedures, and start-up readiness reviews.</li></ul><br><p><b>Technical Skills</b></p><br><br><ul><li>Extensive experience in FEED and Detailed Engineering design for offshore/onshore greenfield/brownfield projects.</li><li>Proficiency in process simulation software (e.g., Aspen HYSYS, Flare System Analyzer, ProMax, Pipesim, Pipenet, others).</li><li>Strong knowledge of process safety management and hazard analysis techniques.</li><li>Familiarity with relevant industry codes and standards (e.g., API, ASME, ISO).</li><li>Experience with process control systems and instrumentation.</li></ul><br><p><b>Soft Skills</b></p><br><br><ul><li>Leadership and team management skills.</li><li>Strong communication and interpersonal skills.</li><li>Ability to work collaboratively in a multidisciplinary environment.</li><li>Problem-solving mindset with a focus on innovation and efficiency.</li><li>Adaptability to changing project requirements and priorities.</li></ul><br><p><b>Qualifications</b></p><br><br><ul><li>Mandatory:&nbsp;Bachelor’s degree in engineering (Chemical, Process, or related field).</li><li>Preferred:&nbsp;Master’s degree in engineering (Chemical, Process, or related field) and/or membership of internationally accepted applicable professional Institute.</li><li>10 years of experience in process engineering within engineering Contractors, with a focus on FEED and EPC design for upstream onshore/offshore greenfield/brownfield projects.</li></ul><br><p><b>Work Environment</b></p><br><br><p>The role will be based in Iraq, requiring collaboration with local and international teams. The work environment is dynamic and fast-paced, necessitating flexibility and a proactive approach to challenges.</p><br><br><br><br><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>&nbsp;<strong>Launch Your Career as a Field Engineer with Weatherford</strong></p><br> <p>Are you ready to kick-start your engineering career in a hands-on, high-impact role? At Weatherford, our Field Engineers are the essential connection between our cutting-edge technologies and the real-world challenges faced in oil and gas rigs.&nbsp;</p><br> <p>This is more than just a job — it’s an adventure. You’ll be working in the field, often at remote rig sites, where you’ll gain unmatched experience and responsibility from day one. Whether it’s assembling equipment, analysing data, or solving problems on the fly, you’ll be at the heart of operations that matter.&nbsp;</p><br> <p><strong>Your Development Journey</strong>&nbsp;</p><br> <p>You’ll be enrolled in our 4-year Field Engineer Technical Development Program, which blends classroom learning with real-world experience:&nbsp;</p><br> <ul> <li>Year 1: Work with guidance and take part in hands-on training at one of our global centers. Travel may be needed to gain real-world experience</li> <li>Year 2: Take on more responsibility at the wellsite while continuing to grow your technical skills through hands-on and classroom training</li> <li>Years 3 &amp; 4: Expanding your knowledge and skills, and may lead teams at the wellsite while serving as the main contact for our clients</li> </ul> <p><strong>Your day-to-day could include:&nbsp;</strong></p><br> <ul> <li>Prepare, deploy, and operate advanced downhole tools to meet specific wellsite objectives</li> <li>Utilize cutting-edge simulation software to design and optimize wellsite solutions tailored to client needs</li> <li>Analyse performance data and recommend improvements&nbsp;</li> <li>Manage&nbsp;equipment logistics and ensure seamless setup and operation at the rig site</li> <li>Create detailed post-job reports and share actionable insights with clients and internal teams</li> <li>Champion a culture of continuous improvement with a strong focus on safety, quality, and performance</li> <li>Deliver front-line engineering support to our customers throughout operations, resolving issues independently</li> </ul> <p><strong>What We’re Looking For</strong>&nbsp;</p><br> <ul> <li>Graduated with bachelor’s degree in engineering (all fields) within the last 24 months</li> <li>No more than 1 year of experience</li> <li>English language fluent proficiency (written and spoken)</li> <li>Strong communication and interpersonal skills</li> <li>Ability to analyse complex problems, apply critical thinking, and make informed decisions</li> <li>A passion for hands-on work and learning in dynamic environments&nbsp;(onshore and offshore)</li> </ul> <p><strong>What to Expect</strong>&nbsp;</p><br> <p>This role is physically and mentally demanding. You’ll work 12-hour shifts (day or night), often in tough weather conditions. You may be away from home for extended periods, including weekends and holidays. But if you’re up for the challenge, the rewards are big.&nbsp;</p><br> <p>You’ll join one of our specialized product lines, such as:&nbsp;</p><br> <ul> <li>Completions&nbsp;</li> <li>Drilling Services&nbsp;</li> <li>Wireline Services&nbsp;</li> <li>Artificial Lift&nbsp;</li> <li>Well Services&nbsp;</li> <li>Managed Pressure Drilling…and many more&nbsp;</li> </ul> <p>&nbsp;<strong>Why Join Us?</strong>&nbsp;</p><br> <ul> <li>Fast-track your career with structured development and mentorship&nbsp;</li> <li>Work with cutting-edge technology in real-world settings&nbsp;</li> <li>Travel, learn, and grow with a global leader in energy services&nbsp;</li> <li>Open doors to future roles in operations, product management, sales, and more&nbsp;</li> </ul> <p>Ready to engineer your future? Apply now and start your journey with Weatherford</p><br> <br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are seeking a Senior project Engineer who will define and develop industrial facilities and project scopes in line with business and operational requirements.</p><ul><li>Define and develop industrial facilities and project scopes aligned with business and operational requirements.</li><li>Lead or support feasibility studies, technical assessments, preliminary budgets, and project schedules.</li><li>Coordinate project activities across Operations, General Services, IT, Finance, and C&amp;P.</li><li>Support the full project lifecycle from need definition and design through authorization, execution, and handover.</li><li>Identify opportunities for optimization, simplification, and innovation.</li><li>Ensure compliance with regulatory, company, and HSE requirements.</li><li>Provide technical support for tendering and contract management activities.</li><li>Monitor project progress, costs, risks, quality, and deliverables.</li><li>Provide technical guidance to project teams and junior contributors.</li><li>Support management in interactions with contractors, partners, and stakeholders.</li><li>Promote safe engineering practices, risk prevention, and environmental performance.</li><li>Ensure confidentiality of technical, contractual, financial, and project-related information.</li></ul><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Requirements</p><ul><li>Bachelor’s or Master’s degree in Engineering or an equivalent field.</li><li>15+ years of experience in industrial projects, engineering, or project delivery.</li><li>Experience in Oil &amp; Gas, Energy, Infrastructure, or large-scale industrial environments strongly preferred.</li><li>Strong expertise in project planning, scheduling, execution, cost control, and risk management.</li><li>Solid knowledge of engineering design, technical specifications, and construction interfaces.</li><li>Good understanding of contract and procurement processes related to project delivery.</li><li>Ability to assess technical, economic, and environmental project feasibility.</li><li>Strong communication, stakeholder management, and multidisciplinary team coordination skills.</li><li>Strong problem-solving mindset with practical execution capability.</li><li>High level of autonomy, rigor, accountability, and adaptability.</li><li>Experience in international or multinational project environments, including cross-border teams and contractors.</li><li>Middle East or Iraq project experience is a strong advantage.</li><li>Fluent English and Arabic (mandatory); French is an advantage.</li></ul><p><br></p></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Senior Piping Engineer - Materials (Iraq)<br><br><br><p><b><i>"</i></b><b><i>Belong, Connect, Grow, with KBR! </i></b></p><br><br><br><p><b><i>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</i></b></p><br><br><br><p><b><i>KBR provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets."</i></b></p><br><br><br><p><b>Title:</b>&nbsp;Senior Piping Engineer – Materials</p><br><br><p><b>Location:</b>&nbsp;Iraq - KBR office</p><br><br><p>28/28 rotation</p><br><br><br><p><b>Job Purpose</b></p><br><br><ul><li>Define piping design bases, codes, standards, and deliverables to ensure safe, reliable, and cost-effective solutions.</li><li>Single point of contact for Piping deliverables and Activities related to Piping Materials </li><li>Interface with client, Vendor and other stakeholders for successful execution of the project</li><li>Coordinate with multi-disciplinary teams (process, mechanical, civil, electrical, instrumentation) and vendors to ensure integrated piping systems.</li><li>Mentor engineers, drive quality, and ensure schedule adherence for piping deliverables across project phases.</li></ul><br><p><b>Key Responsibilities</b></p><br><br><ul><li>Develop and review piping design basis, piping material specifications, datasheets, and technical bid evaluations.</li><li>Ensure compliance with applicable codes and standards and project-specific requirements.</li></ul><ul><li>Development of standard deliverables, various datasheets, and requisition packages related to piping.</li><li>Experience in Non-metallic Piping (GRE / HDPE) Procurement and specs.</li><li>Provide in-depth technical support for material selection involving metallic and Non-metallic piping systems.</li><li>Participate in material selection and corrosion review sessions to ensure suitable materials for service conditions.</li><li>Review and approve technical deliverables (isometrics, P&amp;IDs, BOMs, MOC/Change Notes, design change requests, technical queries).</li><li>Demonstrated knowledge of the Material Tracking throughout the project cycle.</li><li>Understand the MOC process and employ effective change management throughout the lifecycle of the project</li><li>Contribute to Lesson Learnt from the Project</li><li>Report to Department Manager/ Lead Engineer for the project.</li></ul><br><p><b>Experience</b></p><br><br><ul><li>12+ years of experience in Concept, FEED and Detail Engineering and EPCM experience in the Oil &amp; Gas industry.</li><li>Experience in Middle East clients like ADNOC, BP, BOC, PDO, Total Energies &amp; Qatar Energies others are highly preferred.</li><li>Familiarity of Onshore and Offshore facilities and carried out Greenfield and Brownfield Projects.</li><li>Experience in working with multicultural project teams across the various project execution center’s</li><li>Familiarity with international piping codes and standards such as ASME B31.3, ASTM, API, and NACE MR0175/ISO 15156.</li></ul><br><p><b>Qualifications</b></p><br><br><ul><li>Master or Bachelor of Engineering in a related field.</li><li>Professional membership or relevant certifications (e.g., PE/Chartered Engineer) are a plus.</li><li>Certification related to piping design or stress analysis is advantageous.</li></ul><br><p><b>Technical Skills</b></p><br><br><ul><li>Strong background in piping design, engineering, stress analysis, and support design.</li><li>Proficiency with piping design software and calculation tools (e.g., CAESAR, AutoPIPE and 3D modeling tools).</li><li>Technical experience to prepare manhours estimation for different types of piping activities &amp; deliverables of different phases of the project like Select phase, FEED &amp; Execution etc.</li><li>Familiarity with codes, standards, regulations and practices applicable to the design and construction of Various facilities.</li><li>Hands on knowledge of codes and standards relevant to piping.</li><li>Experience with high-pressure piping, thermal insulation, coatings, and corrosion considerations.</li><li>Diverse working experience in project management, conceptual, FEED and detailed design, and construction.</li><li>Knowledge of Interdisciplinary Work Processes/Interface/Deliverables</li><li>Responsible for the training and development of engineers in his/her Team.</li><li>Adherence to company processes and procedures and handle internal and external project audits.</li><li>Proven experience in vendor qualification, technical bid evaluation, and factory audits.</li></ul><br><p><b>Soft Skills</b></p><br><br><ul><li><b>Communication:</b>&nbsp;Clear, concise communication with technical and non-technical stakeholders.</li><li><b>Problem Solving:</b>&nbsp;Proactive identification and mitigation of piping-related risks.</li><li><b>Project Management:</b>&nbsp;Planning, scheduling, risk management, and deliverable tracking.</li><li><b>Influence &amp; Collaboration:</b>&nbsp;Effective collaboration with clients, vendors, and internal teams.</li><li><b>Adaptability:</b>&nbsp;Comfort in dynamic project environments and changing technical requirements.</li><li><b>Attention to Detail:</b>&nbsp;Rigorous approach to reviews, calculations, and documentation.</li><li><b>Safety Mindset:</b>&nbsp;Commitment to health, safety, and environment (HSE) standards.</li><li><b>Critical Thinking: </b>Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems</li></ul><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <strong> We are supporting a leading international Oil &amp; Gas operator in Basra to hire an experienced <strong>Wells Civils Data Engineer.<br></strong><br>This is a unique opportunity to contribute to a long-term, high-impact project, working alongside global experts on one of the region’s most strategic energy developments.<br>With over 1500 workers supporting our clients in Iraq, NES has deep insight into their culture and hiring expectations - allowing us to support candidates effectively throughout the hiring process. <br> <br>Job Description <br>Job Title&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;:Wells Civils Data Engineer<br>Job Category&nbsp; &nbsp;:Wells - Drilling, Workover and Well Services<br>Location&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;:Basra (rotational 14:14 subject to change)<br>Role Summary:<br></strong>The Wells Civils Data Engineer reports directly to the Wells Civils Manager. <br>The role is responsible for all data related to civil scope of works for drilling, workovers and well services in the field. As required, may also be responsible for the correlation and updating QAQC &amp; KPI processes.<br>The role is instrumental in maintaining the wells civil databases, strengthening commitment to excellence, operational compliance and efficiency.<strong><strong> <br>Key Responsibilities<br></strong></strong><ul><li>Compile daily contractor reports and prepare the Wells Civils daily report.</li><li>Prepare and correlate the Monthly Dashboard for publication in Power BI.</li><li>Coordinate training requests, manage approvals, send notifications, and track progress.</li><li>Update the Civils Operations Tracker with daily data entries.</li><li>Oversee the Call Out Cost Tracker, ensuring autonomy and accuracy.</li><li>Prepare call outs, input into the cost tracker and send to Civils Team Leader for signatures</li><li>Prepare &amp; issue completion certificates to the Civils Team Leader for required signatures.</li><li>Maintain document controls for the wells folders to ensure all information is current.</li><li>Carry out additional duties as assigned.</li></ul><strong><strong><strong>Qualifications &amp; Experience:<br></strong><br><strong>Essential:</strong><br></strong></strong><ul><li>A minimum of 3 years’ experience in Data Management or a Document Control role within the Oil &amp; Gas industry.</li><li>Demonstrates advanced proficiency in utilizing the Microsoft Office suite of applications.</li><li>Excel expert</li><li>Skilled in MS Project</li><li>English language skills – both written &amp; spoken.</li><li>Arabic Speaker.</li><li>Capable of handling a fast-paced, high-volume work environment with frequent challenges.</li><li>Demonstrated experience in managing dynamic, multi-site operations.</li><li>Strong communicator &amp; team player.</li><li>Attention to detail</li></ul><strong><strong>&nbsp;<br><strong>Preferred:</strong><br></strong></strong><ul><li>A bachelor’s degree in Engineering or a technically related subject is desired or analogous discipline (Scientific).</li><li>International experience preferred Middle East onshore.</li></ul><br> <strong>Why This Opportunity Stands Out:</strong><br>• Long-term project stability (many contractors exceed 10 years)<br>• Exposure to a major global operator<br>• Opportunity to work alongside industry-leading professionals<br><strong> Why Apply Through NES?</strong><br>NES is the world’s leading engineering staffing provider, operating across Oil &amp; Gas, Power, Life Sciences, and infrastructure sectors.<br><ul><li>80+ offices across 45 countries</li><li>24,000+ contractors globally and 10,000+ in the Middle East</li><li>Strong regional presence and long-term client partnerships</li></ul><br> If you find this opportunity matching your skills or if you know someone suitable for the role, please drop your CV on sayali.kothmire@nesfircroft.com<br>With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil &amp; Gas, Power &amp; Renewables, Chemicals, Construction &amp; Infrastructure, Life Sciences, Mining and&nbsp;Manufacturing&nbsp;sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients. <br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>&nbsp;<strong>Launch Your Career as a Field Engineer with Weatherford</strong></p><br> <p>Are you ready to kick-start your engineering career in a hands-on, high-impact role? At Weatherford, our Field Engineers are the essential connection between our cutting-edge technologies and the real-world challenges faced in oil and gas rigs.&nbsp;</p><br> <p>This is more than just a job — it’s an adventure. You’ll be working in the field, often at remote rig sites, where you’ll gain unmatched experience and responsibility from day one. Whether it’s assembling equipment, analysing data, or solving problems on the fly, you’ll be at the heart of operations that matter.&nbsp;</p><br> <p><strong>Your Development Journey</strong>&nbsp;</p><br> <p>You’ll be enrolled in our 4-year Field Engineer Technical Development Program, which blends classroom learning with real-world experience:&nbsp;</p><br> <ul> <li>Year 1: Work with guidance and take part in hands-on training at one of our global centers. Travel may be needed to gain real-world experience</li> <li>Year 2: Take on more responsibility at the wellsite while continuing to grow your technical skills through hands-on and classroom training</li> <li>Years 3 &amp; 4: Expanding your knowledge and skills, and may lead teams at the wellsite while serving as the main contact for our clients</li> </ul> <p><strong>Your day-to-day could include:&nbsp;</strong></p><br> <ul> <li>Prepare, deploy, and operate advanced downhole tools to meet specific wellsite objectives</li> <li>Utilize cutting-edge simulation software to design and optimize wellsite solutions tailored to client needs</li> <li>Analyse performance data and recommend improvements&nbsp;</li> <li>Manage&nbsp;equipment logistics and ensure seamless setup and operation at the rig site</li> <li>Create detailed post-job reports and share actionable insights with clients and internal teams</li> <li>Champion a culture of continuous improvement with a strong focus on safety, quality, and performance</li> <li>Deliver front-line engineering support to our customers throughout operations, resolving issues independently</li> </ul> <p><strong>What We’re Looking For</strong>&nbsp;</p><br> <ul> <li>Graduated with bachelor’s degree in engineering (all fields) within the last 24 months</li> <li>No more than 1 year of experience</li> <li>English language fluent proficiency (written and spoken)</li> <li>Strong communication and interpersonal skills</li> <li>Ability to analyse complex problems, apply critical thinking, and make informed decisions</li> <li>A passion for hands-on work and learning in dynamic environments&nbsp;(onshore and offshore)</li> </ul> <p><strong>What to Expect</strong>&nbsp;</p><br> <p>This role is physically and mentally demanding. You’ll work 12-hour shifts (day or night), often in tough weather conditions. You may be away from home for extended periods, including weekends and holidays. But if you’re up for the challenge, the rewards are big.&nbsp;</p><br> <p>You’ll join one of our specialized product lines, such as:&nbsp;</p><br> <ul> <li>Completions&nbsp;</li> <li>Drilling Services&nbsp;</li> <li>Wireline Services&nbsp;</li> <li>Artificial Lift&nbsp;</li> <li>Well Services&nbsp;</li> <li>Managed Pressure Drilling…and many more&nbsp;</li> </ul> <p>&nbsp;<strong>Why Join Us?</strong>&nbsp;</p><br> <ul> <li>Fast-track your career with structured development and mentorship&nbsp;</li> <li>Work with cutting-edge technology in real-world settings&nbsp;</li> <li>Travel, learn, and grow with a global leader in energy services&nbsp;</li> <li>Open doors to future roles in operations, product management, sales, and more&nbsp;</li> </ul> <p>Ready to engineer your future? Apply now and start your journey with Weatherford</p><br> <br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>About Rahal Rahal is the travel mini-app inside Iraq’s Super Qi ecosystem, a Rocketship redefining how millions of travelers search, book, and manage journeys across flights, hotels, and digital services.<br> We make travel simple, safe, and accessible to everyone, everywhere.<br> Behind every great traveler experience lies a powerful hotel inventory and this is where you come in.<br> We’re building a new generation of travel; transparent, tech-first, and truly customer-obsessed.<br> About the Role Rahal is looking for a Senior Backend Software Engineer who will play a key role in designing and implementing advanced solutions to improve our Travel platform, enhancing customer satisfaction and ensuring smooth operational processes.<br> Key Responsibilities Design and implement reusable, clean, tested, efficient, secure, maintainable, and well-documented solutions.<br> Assist partners in their integration process with our published APIs.<br> Document findings, actions, and plans thoroughly, by setting up the foundations for a solid reporting framework and a communication standard.<br> Provide the technical feasibility of implementing product requirements and offer valuable input to the product team.<br> Translate product requirements into SRS and technical plan.<br> Proactively identify technical debt and propose mitigation strategies.<br> Maintaining and developing your knowledge about software development, and supporting/mentoring other team-members, sharing guidance to help them achieve career growth.<br> Conduct code reviews for peers to enhance code quality and ensure adherence to high standards.<br> Understanding the business side of the project and having the ability to lead in-depth technical and product discussions.<br> Bring new tools and invitations that can boost the startup productivity.<br> Requirements 5+ Years of experience in Software Engineering or adjacent fields.<br> 3+ Years of experience working fully remotely with a track record of self-management and accountability.<br> Hands-on experience with JavaScript/typescript and/or NodeJS/NestJs.<br> In-depth understanding of web application architecture and design principles behind the scalable applications.<br> Solid understanding of the Software Development Life Cycle (SDLC) and Agile methodologies.<br> Experience in designing and optimizing databases, with skills in query optimization, scaling, data modeling.<br> Advanced knowledge of Docker and AWS.<br></span> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Senior CWI Engineer<br><br>Position Details<ul><li>Position Title: CWI Senior Engineer</li><li>Department: Wells</li><li>Location: Majnoon Oil Field – Basra, Iraq</li><li>Reports to: CWI Engineering Team Lead</li><li>Direct Reports: None</li></ul>1. Role Purpose<p>Provide engineering expertise in the planning, design, and execution support of completions, workover, well intervention and well integrity operations. Ensure high-quality engineering input, technical assurance, well integrity compliance, and continuous performance improvement across CWI operations.</p><br><br>2. Key ResponsibilitiesHSSE &amp; Well Integrity<ul><li>Champion a proactive safety culture with Zero Harm.</li><li>Conduct site safety visits, audits, and toolbox talk reviews.</li><li>Ensure compliance with well integrity standards such as NORSOK D‑010</li><li>Ensure engineering designs comply with HSSE policies, Life-Saving Rules, and well integrity guidelines.</li><li>Participate in risk assessments, HAZID, HAZOP, and technical assurance reviews.</li><li>Support incident investigations by providing technical analysis and recommendations.</li></ul>Program Development &amp; Technical Assurance<ul><li>Prepare and review Completion Programs, Workover Programs, and Intervention Procedures.</li><li>Develop well schematics, tool string designs, barrier philosophies, and risk assessments.</li><li>Ensure engineering designs comply with well integrity standards and operational requirements.</li><li>Perform technical evaluations for new technologies, equipment, and intervention methods.</li></ul>Operational Support &amp; Problem Solving<ul><li>Provide real-time engineering support to wellsite supervisors during operations.</li><li>Analyze operational challenges and propose technical solutions.</li><li>Perform pre-job and post-job reviews to ensure procedural compliance.</li><li>Support SIMOPS planning and coordination with Production, Subsurface, and Drilling teams.</li></ul>Cost &amp; Schedule Control<ul><li>Support development of budgets, forecasts, and AFE inputs.</li><li>Monitor job efficiency, performance, and operational KPIs.</li><li>Identify cost‑saving opportunities without compromising safety or quality.</li></ul>Contractor &amp; Performance Management<ul><li>Lead technical interface with service companies and contractors.</li><li>Evaluate technical proposals, equipment specifications, and new technologies.</li><li>Support tendering, technical evaluations, scopes of work, and contract management.</li><li>Monitor service quality and ensure alignment with engineering requirements.</li></ul>Reporting &amp; Governance<ul><li>Review technical proposals from service companies and ensure alignment with operational requirements.</li><li>Participate in contractor performance reviews and technical evaluations.</li><li>Ensure QA/QC compliance for equipment and tools used in rigless operations.</li></ul>3. Qualifications &amp; Experience<ul><li>Bachelor’s degree in Petroleum, Mechanical, or related Engineering discipline.</li><li>8-12+ years of experience in completions, well intervention, workover, and well integrity engineering disciplines.</li><li>Valid IWCF Level 4 Well Intervention Pressure Control certification.</li><li>Strong experience leading CWI engineering teams in high‑activity onshore fields.</li><li>Comprehensive understanding of well integrity standards (e.g., NORSOK D‑010), well control, and barrier management.</li><li>Strong knowledge of international standards (API, ISO, IOGP) and regulatory compliance requirements.</li><li>Expertise in completion, CT, slickline, e-line, ESP, stimulation, and workover engineering.</li><li>Experience in Iraq/Majnoon preferred.</li><li>Fluency in English; Arabic is an advantage.</li></ul>4. Core Competencies<ul><li>CWI Technical Mastery</li><li>Well Integrity &amp; Risk Management</li><li>Engineering &amp; HSSE Leadership</li><li>Performance Management &amp; Continuous Improvement</li><li>Cross‑Functional Collaboration</li><li>Contractor &amp; Stakeholder Management</li><li>Communication &amp; Technical Reporting</li></ul><br><p>Approved By: Steven Hendry</p><br><br><br><p>Position: Wells Manager</p><br><br><br><p>Date: 03 Mar 2026</p><br><br><br><br><br> </div>

<p>The Chief Engineer will be based at one of the Amentum sites in Iraq and serve the Operations and Maintenance Support Services (OMSS) contract in support of the U.S. Department of State.</p><p>The Chief Engineer is responsible for all water purification, water storage, water distribution and wastewater treatments, as well as generators, and associated power generation, transmission and distribution equipment.</p><p>The Chief Engineer is also responsible for the safe operation and maintenance of power plants, generators, compressors, air conditioning systems, etc., and operates industrial machinery and equipment in various forms.</p><p>The duties and responsibilities listed are representative of the nature and level of work assigned and are not necessarily all inclusive.</p><p><b><br></b></p><p><b>DUTIES:</b></p><ul><li>Responsible for maintaining a safe workplace and ensuring safety is the highest priority in the workplace.</li><li>Comply with all Environmental &amp; Safety and Quality Assurance requirements and goals.</li><li>Provide information and materials to these divisions as necessary to ensure adequate and legal documentation.</li><li>Responsible for managing, monitoring and tracking physical plant and building operations services.</li><li>Supervise and oversee the operations of the water and wastewater treatment plants to include all water quality laboratory, pumping, filtering, piping and control systems.</li><li>Ensure the viability, availability and safety of water treatment and waste distribution systems.</li><li>Maintain water well operations and water storage systems.</li><li>Manage water treatment waste stream to contractual standards.</li><li>Oversee the: Prime power and water/wastewater treatment programs; Operation, calibration, diagnostics, troubleshooting and repairs to all mechanical, electrical equipment systems and electrical/pneumatic control systems.</li><li>Preventative maintenance, condition monitoring, repair, installation and modernization of all power generation, transmission and distribution equipment on site; and Support of prime power generators made by Caterpillar, Cummins, Perkins, FG Wilson and other manufacturers, with outputs ranging from 20KW up to 160KW.</li><li>Provide daily guidance and direction to supervisors, operators, mechanics and technicians.</li><li>Perform scheduled and unscheduled inspections.</li><li>Report any malfunctions or lack of compliance with SOW to the Chief Engineer.</li><li>Assist in developing the SOW when requested, including diagrams and specifications in compliance with Overseas Building Operations (OBO), Environmental Protection Agency (EPA), Occupational Safety and Health Administration (OSHA) and National electric Code (NEC) standards.</li><li>Maintain effective, timely and respectful communication and interaction with other employees and managers and support other organizations.</li><li>Perform administrative tasks including ordering material, inventorying and scheduling work.</li><li>Manage logistics, stock levels and workflow processes.</li><li>Collect, analyze and summarize data for report preparation and submit written reports.</li><li>Maintain appropriate technical library and record keeping, which documents all procedures necessary to accomplish assigned responsibilities.</li><li>Responsible for facility custodianship of work area and management of tools, equipment and spare parts.</li><li>Take initiative to analyze situations and make frequent technical decisions based on specifications, safety and electrical codes.</li><li>Evaluate operational effectiveness and develop/maintain effective operational control mechanisms.</li><li>Responsible for allocating and managing staff resources according to changing needs</li><li>Identify problem areas and respond to mission requirements to perform task order requirements.</li><li>Plan and manage projects.</li><li>Control resources; monitor staff proficiency and qualifications; monitor the locations and activities of assets; and coordinate the flow of information to and from O&amp;M staff and USG representatives.</li><li>Resolve physical plant and building operations issues.</li><li>Provide professional engineering guidance for all future work and technical proposals and will be responsible for drafting and presenting reports and analysis of system performance and recommendations for improvement.</li><li>Interpret all architectural, civil, structural, mechanical, electrical, plumbing, and fire system diagrams or drawings for large facilities.</li><li>Continually interface with Department of State Facility Management personnel in order to coordinate the work being completed on the equipment systems within the Utilities section and brief the customer during meetings and site surveys.</li><li>Perform additional duties and projects as assigned.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><br></li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Important Employment Information This role is located in Baghdad and will be hired through a third-party employment provider, as Atlas Copco does not maintain a legal entity or Customer Center in the country. While administrative processes such as contracts and payroll will be handled externally, your day-to-day operations will be fully connected to the Turkiye Customer Center, reporting to the Business Line Manager in Turkiye. Your role As an Area Sales Engineer, your mission is to develop sales and market our products in Baghdat Iraq by leveraging your technical expertise and understanding of customer needs. You will report to the Business Line Manager and work closely with product teams to ensure successful execution of sales strategies. You will: Establish and manage channel partners through the distribution network. Conduct market research and identify opportunities in the assigned region. Generate product requirements and determine regional specifications. Coordinate production timetables, pricing, and plans for product introduction. Develop marketing strategies and manage dealer relationships. Deliver product training and support after-sales activities. Drive sales for Portable Compressors, Handheld Tools, Generators, Pumps, and Light Towers and Aftermarket Products. To succeed, you will need You have: 3+ years of experience working as a Sales Engineer or in a similar technical-commercial role. A university degree in Engineering, Marketing, or Business Management (preferably mechanical, electrical, or industrial engineering) Non-negotiable skills: Strong technical know-how and marketing knowledge. Ability to develop and execute sales strategies, including dealer management and channel development. Fluency in English (written and verbal) and a valid local driving license. Preferred skills: Experience in market research and determining customer needs through data collection and analysis. Ability to recommend product scope, review specifications, and appraise new product ideas or packaging changes. Skilled in competitor analysis and defining product marketing communication objectives. Experience in preparing short- and long-term sales forecasts, special reports, and answering management requests. Ability to manage inventory turnover and product availability through forecasting and production schedule alignment. Expertise in pricing strategies using market research data and cost analysis for customized orders. Familiarity with digitalization tools and platforms for product development, sales, and marketing activities. Strong understanding of product management and value creation principles. Excellent presentation, communication, and relationship-building skills. Advanced computer skills (MS Office) and adaptability to new technologies. Additional responsibilities include: Regular dealer and end-user visits, product training, and after-sales support. Selling and promoting service products (e.g., maintenance parts, kits, lubricants). Building and maintaining strong business relationships with customers and distributors. Maintaining professional and technical knowledge by attending workshops, reviewing publications, and networking. Contributing to team efforts and performing other duties as directed by management. In return, we offer Culture of trust and accountability Lifelong learning and career growth Innovation powered by people Comprehensive compensation and benefits Health and well-being Job location This role is fully remote, enabling you to work from anywhere within the region of Baghdad, while being associated with our customer center in Turkiye.</span> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Senior Process Safety Engineer<br><br><p><b>Job Description</b></p><br><br><p><b>Job Title: </b>Senior Process Safety Engineer<br><b>Company: </b>KBR<br><b>Location</b>: Basra Iraq<br><b>Employment Type:</b> Full-time, Contract</p><br><br><p>Rotation: 28/28</p><br><br><p>Required Nationals Any</p><br><br><br><p><b>About Company</b></p><br><br><p><i><u>"Belong, Connect, Grow, with KBR!</u></i></p><br><br><br><p><i>The KBR team delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</i></p><br><br><br><p><i>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets."</i></p><br><br><br><p><b>Job Purpose</b></p><br><br><br><p>Shaping risk management by developing guidelines and leading/participating in safety studies, safety reviews, implementing PSM/HSSE Management, also acting as a consultant for commercial teams and other business partners in the early stages of project development &amp; MOC detailed Risk assessment</p><br><br><br><p><b>Job Responsibilities</b></p><br><br><br><ul><li><span>Provide technical leadership, advice and support in the implementation of Safety Management Systems.</span></li><li><span>Provide HSEQ input in the Risk and Safety studies performed (e.g. HAZOP, HAZID), participate in internal audits, conducts independent safety tours; and support safety improvements, including Root Cause Analysis (RCA) and procedure development, with a particular focus on process safety.</span></li><li><span>Improve process safety awareness across the organization, particularly among engineers and project leaders, through continuous improvement initiatives, Management of Change (MOC), and joint site inspections.</span></li><li><span>Facilitate and participate in P&amp;ID reviews, HEMP, HAZID, HAZOP, SIL, layout safety reviews, PSSR, 3D model reviews, safety audits, QRA workshops, and other relevant process and technical safety studies.</span></li><li><span>Deliver training and actively communicate Process Safety Management (PSM) requirements and related matters to the organization and relevant stakeholders.</span></li><li><span>Coordinate and oversee process safety engineering activities to ensure technical objectives are achieved during new projects, MOCs, and technical studies.</span></li><li><span>Review technical bid submissions and conduct technical bid evaluations and analyses. </span></li><li><span>Participate in EPC contractor and vendor pre-qualification, bid evaluation, and performance evaluation.</span></li><li><span>Ensure the quality and accuracy of EPC contractors' process safety engineering activities and review associated deliverables, including philosophies, layouts, detailed drawings, close-out reports, risk studies, and process safety system documentation.</span></li><li><span>Participate in the commissioning, start-up, and performance testing of new projects, verifying the availability and functionality of Process and Technical Safety Systems.</span></li><li><span>Develop Process Safety Management procedures, monitor their implementation, and evaluate their effectiveness.</span></li><li><span>Develop Technical Supply Specifications, Technical Design Guidelines, and Basis for Design documentation for large-scale MOCs.</span></li><li><span>Support HSE, Process Safety, and Asset Integrity audits and coordinate the planning and implementation of resulting corrective actions.</span></li><li><span>Participate in Process Incidents Investigations.</span></li><li><span>Provide Process and Process Safety technical expertise in Flow Assurance, Hydraulic Calculations, Blowdown Verification, Surge Analysis &amp; Equipment Sizing.</span></li></ul><br><p><b>Technical Qualification &amp; Skills</b></p><br><br><ul><li><span>Minimum Bachelor's degree in Chemical Engineering.</span></li><li><span>15+ of engineering experience in the Oil and Gas industry.</span></li><li><span>10+ years of Process Safety engineering experience or equivalent in the Oil and Gas industry.</span></li><li><span>Experience with Brownfield / Revamp projects.</span></li><li><span>Practical knowledge and experience in HAZOP, LOPA, MOC, Physical Effects Modelling, and Facility Siting.</span></li><li><span>Good knowledge of CCPS/EI Process Safety Management and Risk-Based Process (RBPS) guidelines.</span></li><li><span>PH &amp; RA certifications.</span></li><li><span>Strong knowledge of process safety regulations, standards, and industry practices, including OSHA PSM, EPA RMP, and NFPA requirements</span></li></ul><br><p><b>Soft skills</b></p><br><br><ul><li><span>Excellent analytical, problem-solving, and management skills.</span></li><li><span>Strong communication and interpersonal skills.</span></li><li><span>Ability to work independently and as part of a team.</span></li><li><span>Proficiency in Microsoft Office applications, including Excel, Word, PowerPoint and Outlook.</span></li><li><span>English - upper intermediate proficiency (both verbal &amp; written)</span></li></ul><br><br><br><br> </div>

<p><b>Job Objectives/Project context:</b></p><p><br></p><p>The project is a gas plant located in Iraq, delivered under a DBOOM (Design, Build, Own, Operate, Maintain) contract. The Construction phase and Mechanical Completion are ongoing, Commissioning to be started very sooner. An experienced reinforcement is required to support the Commissioning &amp; Start-Up Manager, drive contractors across all disciplines and accelerate activities in fast-track mode, with no compromise on safety or quality.</p><p><br></p><p>Key Responsibilities:</p><p><br></p><p>Monitoring &amp; driving: Ensure day-to-day monitoring of contractors’ progress across all disciplines (ICSS, mechanical, electrical, instrumentation, HVAC, utilities…).</p><p>Acceleration: Challenge contractors, identify bottlenecks, enforce priorities and push teams to meet commissioning milestones.</p><p>Methodology: ORBIT methodology is considered for this project for the follow up of (subsystems, ITR, punch lists, MC/RFCC, completion dossiers).&nbsp;</p><p>Documentation: To make sure of the readiness of procedure and dossier to be ready for the activities. Review and validate commissioning procedures, JSA, energization dossiers, LoTo, PSSR…And to prepare all the handover of the phase Precom - Commissioning.</p><p>Coordination: Coordinate Mechanical Completion, pre-commissioning, commissioning and start-up activities while securing interfaces and SIMOPS.</p><p>Reporting: Run daily and weekly review meetings with Construction, CSU and Company Representative.</p><p>Handover: Deliver the closure of punch lists (A/B), remarks clearance and handover to operations.</p><p>&nbsp;</p><p><b>Qualifications</b></p><p><br></p><p><br></p><p>Expected:</p><p><br></p><p>Engineering degree (MSc / BSc) in chemical, mechanical, electrical, instrumentation engineering or equivalent.</p><p>Experience:</p><p><br></p><p>Experience: Minimum 15 years of experience in commissioning and start-up of Oil &amp; Gas / LNG / petrochemical facilities.</p><p>Projects: Proven track record on at least two (2) gas plant, LNG or refinery projects delivered in fast-track mode.</p><p>Methodology: knowledge of OPERCOM and Orbit is a plus.</p><p>Environment: Previous experience working for a major international operator and managing multi-discipline contractors.</p><p>Technical Skills:</p><p><br></p><p>In-depth knowledge of subsystems, ITR, MC, RFCC, punch lists and system completion.</p><p>Full command of HSE, ATEX, PtW, LoTo, safety inhibition and PSSR procedures.</p><p>Strong understanding of process equipment, rotating, HV/LV electrical, F&amp;G, ESD/PSD and ICSS systems.</p><p>Proficiency with completion management tools (ICAPS or equivalent).</p><p>Personal Qualities:</p><p><br></p><p>Leadership: Ability to challenge contractors and enforce priorities.</p><p>Adaptability: Comfort in fast-track, multicultural and high-pressure environments.</p><p>Rigor: Strong reporting discipline, documentation rigor and clear communication.</p><p>Diplomacy: Team spirit and diplomacy at Company / EPC / Vendor interfaces.</p><p>Languages:</p><p><br></p><p>Fluent professional English (mandatory).</p><p>French appreciated. Arabic is a plus.</p><p>Conditions:</p><p><br></p><p>Site-based assignment in Iraq, Rotational.</p><p><strong>Desired Candidate Profile</strong></p><p><br></p>