Automotive Engineer Jobs - Karbala Iraq

<p>The GSE Electrician Technician is responsible for performing electrical preventive, corrective, and emergency maintenance on all Ground Support Equipment across the airport. This includes 12V/24V/48V DC systems, AC electrical systems, control panels, sensors, alternators, starters, wiring harnesses, ECUs, and electrical components related to diesel/electric GSE. The role ensures the electrical systems of all GSE units are reliable, safe, and operational to support continuous airport operations. o Performs electrical maintenance and repair of all GSE electrical systems, including: o GPUs (400Hz/28V DC) electrical circuits o ASU electrical systems o Pushback tractors electrical/electronic components o Belt loaders, baggage tractors, and high-lift trucks o Lavatory/water trucks electrical systems o Battery-operated GSE o Troubleshoots electrical faults related to: o Fuses, relays, connectors o Alternators, starters, batteries o Controllers, ECUs, sensors o Switches, actuators, solenoids o Diagnoses electronic and CAN-BUS communication issues (if applicable). o Performs battery maintenance, load testing, and replacement. o Reads and interprets electrical diagrams, wiring schematics, and service manuals. o Uses multimeters, clamp meters, diagnostic scanners, and test equipment effectively. o Assists in overhauls, rebuilds, and electrical refurbishment of older GSE units. o Ensures electrical components are installed correctly and safely. o Supports installation of lighting, safety beacons, alarms, and electrical accessories on GSE. o Completes service reports, checklists, and work orders accurately. o Ensures electrical systems comply with OEM standards and airport safety rules.</p><p>A skilled Electrical Technician with 2-3 years of experience in GSE, heavy vehicles, or industrial equipment maintenance, possessing strong expertise in electrical troubleshooting, batteries, charging systems, wiring, and electronic controls. The candidate should be capable of independently diagnosing and repairing faults while ensuring equipment availability, operational reliability, and compliance with airport safety standards. Education: Diploma in Electrical Engineering Technology or Automotive Electrical Systems. Experience: Minimum 2–3 years of experience in electrical maintenance on GSE, heavy vehicles, or industrial equipment. Strong knowledge of DC/AC automotive electrical systems. Experience in fault finding, wiring, and control systems. Training Requirements: GSE Electrical Systems Training (OEM preferred) , Battery Maintenance & High-Amperage Safety, Airside Driving & Safety (recommended) Computer Skills: MS office Language Skills: Arabic and English Behavioral Competencies: • Delivering Results & Fostering Ownership • Building Customer Value • Networking & Influencing Collaboratively • Leading Teams • Driving Change Technical Competencies • Diagnostic & Troubleshooting Techniques • Preventive & Corrective Maintenance • GSE Maintenance • GSE Electrical Systems • Technical Reporting and Documentation</p>

<p>The Mechanical & Hydraulic Technician (GSE) is responsible for carrying out preventive, corrective, and emergency maintenance on all Ground Support Equipment used in airport operations. This includes diesel engines, transmissions, hydraulic pumps, cylinders, hoses, valves, braking systems, chassis components, and all mechanical/hydraulic assemblies. The role ensures that GSE units remain safe, reliable, and operational to support continuous aircraft ground handling. Performs preventive and corrective maintenance on mechanical and hydraulic systems for all GSE, including: • Pushback tractors • Belt loaders • Baggage tractors • High-lift catering trucks • Lavatory/water service trucks • Ground Power Units (GPU – mechanical side) • Air Start Units (ASU – mechanical/hydraulic side) • Passenger stairs • All hydraulic-driven and mechanical-driven GSE Mechanical Maintenance Tasks • Engine repair and overhaul (diesel & gasoline) • Transmission repair (manual/automatic) • Cooling system service (radiators, hoses, thermostats) • Brake system service (air, hydraulic, mechanical) • Suspension & steering system repairs • Lubrication, oil/filter changes, belt replacement • Structural inspections (welding cracks, chassis damage) Hydraulic Maintenance Tasks • Hydraulic pump repair and replacement • Hydraulic cylinder rebuilding (seals, rods, pistons) • Valve block service and troubleshooting • Hose replacement, fitting installation, and leak rectification • System pressure testing and flow measurement • Hydraulic fluid flushing, bleeding, and contamination control Diagnostics & Technical Reporting • Uses mechanical and hydraulic diagnostic equipment • Identifies mechanical/hydraulic faults and root causes • Reads and interprets service manuals, diagrams, hydraulic schematics • Completes work orders, checklists, and maintenance reports accurately</p><p>A hands-on technician with 2-4 years of experience in heavy equipment, GSE, or hydraulic systems, capable of independently diagnosing and repairing mechanical and hydraulic faults, performing preventive maintenance, reading technical manuals, and ensuring GSE equipment remains safe, reliable, and operational in an airport environment. Education: Diploma in Mechanical Engineering Technology, Automotive Maintenance, or Hydraulic Systems. Experience: 2–4 years of experience in GSE, heavy vehicles, industrial machinery, or hydraulic systems, Strong understanding of engine, hydraulic, and mechanical systems, Airport GSE experience is desirable. Training Requirements: Mechanical & Hydraulic Systems Maintenance, Diesel Engine Repair Training, Hydraulic Troubleshooting. Computer Skills: MS office Language Skills (Eng., Arabic, other): Arabic and English Behavioral Competencies • Delivering Results & Fostering Ownership • Building Customer Value • Networking & Influencing Collaboratively • Leading Teams • Driving Change Technical Competencies • Diagnostic & Troubleshooting Techniques • Preventive & Corrective Maintenance • GSE Maintenance • Hydraulic and Mechanical Systems • Technical Reporting and Documentation</p>

<p>The Mechanical & Hydraulic Technician (GSE) is responsible for carrying out preventive, corrective, and emergency maintenance on all Ground Support Equipment used in airport operations. This includes diesel engines, transmissions, hydraulic pumps, cylinders, hoses, valves, braking systems, chassis components, and all mechanical/hydraulic assemblies. The role ensures that GSE units remain safe, reliable, and operational to support continuous aircraft ground handling. Performs preventive and corrective maintenance on mechanical and hydraulic systems for all GSE, including: • Pushback tractors • Belt loaders • Baggage tractors • High-lift catering trucks • Lavatory/water service trucks • Ground Power Units (GPU – mechanical side) • Air Start Units (ASU – mechanical/hydraulic side) • Passenger stairs • All hydraulic-driven and mechanical-driven GSE Mechanical Maintenance Tasks • Engine repair and overhaul (diesel & gasoline) • Transmission repair (manual/automatic) • Cooling system service (radiators, hoses, thermostats) • Brake system service (air, hydraulic, mechanical) • Suspension & steering system repairs • Lubrication, oil/filter changes, belt replacement • Structural inspections (welding cracks, chassis damage) Hydraulic Maintenance Tasks • Hydraulic pump repair and replacement • Hydraulic cylinder rebuilding (seals, rods, pistons) • Valve block service and troubleshooting • Hose replacement, fitting installation, and leak rectification • System pressure testing and flow measurement • Hydraulic fluid flushing, bleeding, and contamination control Diagnostics & Technical Reporting • Uses mechanical and hydraulic diagnostic equipment • Identifies mechanical/hydraulic faults and root causes • Reads and interprets service manuals, diagrams, hydraulic schematics • Completes work orders, checklists, and maintenance reports accurately</p><p>A hands-on technician with 2-4 years of experience in heavy equipment, GSE, or hydraulic systems, capable of independently diagnosing and repairing mechanical and hydraulic faults, performing preventive maintenance, reading technical manuals, and ensuring GSE equipment remains safe, reliable, and operational in an airport environment. Education: Diploma in Mechanical Engineering Technology, Automotive Maintenance, or Hydraulic Systems. Experience: 2–4 years of experience in GSE, heavy vehicles, industrial machinery, or hydraulic systems, Strong understanding of engine, hydraulic, and mechanical systems, Airport GSE experience is desirable. Training Requirements: Mechanical & Hydraulic Systems Maintenance, Diesel Engine Repair Training, Hydraulic Troubleshooting. Computer Skills: MS office Language Skills (Eng., Arabic, other): Arabic and English Behavioral Competencies • Delivering Results & Fostering Ownership • Building Customer Value • Networking & Influencing Collaboratively • Leading Teams • Driving Change Technical Competencies • Diagnostic & Troubleshooting Techniques • Preventive & Corrective Maintenance • GSE Maintenance • Hydraulic and Mechanical Systems • Technical Reporting and Documentation</p>

<p>Job Specification • Act as the primary liaison and first point of contact for ATC, RFF, Ground Handling Agents, Airlines, Engineering, and external stakeholders on all airside operational matters during the shift, escalating to the Head of Airside Operations where required. • Ensure strict enforcement of Airside Driving Regulations (ADR), Apron Discipline, and all active Airside Driving Permits (ADP) and Airside Vehicle Permits (AVP) throughout the shift; direct shift inspectors to act on violations and authorize the issuance of Non-Compliance Notices (NCN). • Coordinate and direct Wildlife Hazard Management activities during the shift, ensuring that wildlife observations are reported, logged, and acted upon in accordance with the Wildlife Hazard Management Plan, and that the runway and movement area remain safe for operations. • Oversee apron safety and operational discipline across all apron zones, including monitoring of ground handling activities, FOD prevention, fuel safety compliance, and resolution of apron. • Authorize and oversee emergency and contingency responses for airside-specific incidents during the shift — including runway/taxiway incursions, ground handling accidents, FOD alerts, fuel spills, airside vehicle accidents, and wildlife strikes — in accordance with the Airport Emergency Plan (AEP) and Airside Operations contingency procedures. • Complete, review, and submit comprehensive shift log reports capturing all significant events, incidents, operational decisions taken, and handover notes for each shift, ensuring accurate and auditable records for the Head of Airside Operations. • Conduct or delegate shift airside inspections of the movement area, apron, perimeter roads, and active worksites, ensuring compliance with ICAO Annex 14 standards, aerodrome certification requirements, and airport operational procedures. • Represent Airside Operations in real-time coordination calls, Airside Operations Room meetings, and pre/post-flight briefings during the shift as required. Human and Technical Resources • Direct and coordinate the full complement of Airside Operations shift staff across all sections for the duration of the shift, ensuring appropriate task allocation, coverage of all operational zones, and staff welfare. • Utilize the available management systems, stand planning tools, NOTAM databases, radio communication systems, and CCTV/surveillance platforms to maintain real-time situational awareness and operational control throughout the shift. • Ensure all shift operational vehicles and equipment are serviceable and deployed effectively; report unserviceable assets to the Head of Airside Operations and Engineering for immediate action. Planning and Programme • Review and brief all shift staff on the daily flight programme, scheduled airside works, active NOTAMs, planned closures, and any regulatory or safety advisories at shift commencement. • Contribute shift-level observations and operational data to the continuous improvement of Airside Operations procedures, SOPs, and contingency plans by providing structured feedback to the Head of Airside Operations. Core Operational Activities • Execute structured shift start and shift end handovers, ensuring all active permits, incidents, NOTAMs, ongoing works, and outstanding actions are clearly communicated and transferred to the incoming duty manager. • Authorize real-time operational decisions including temporary runway/taxiway restrictions, emergency equipment pre-positioning, and suspension of airside work activities when safety is at risk. • Coordinate the activation and stand-down of airside emergency responses for airside-specific incidents, ensuring all relevant parties (ATC, RFF, Ground Handlers, Engineering, airside operations team) are notified and deployed in accordance with the AEP. • Monitor and enforce FOD (Foreign Object Debris/Damage) prevention programmes across all apron and movement area zones, directing FOD inspections and ensuring immediate clearance of any identified debris. Human Resources Management • Provide direct line management, mentoring, and performance evaluation for all operational shift subordinates in alignment with the airport HR and competency framework. • Manage leave planning, duty rosters, and workforce scheduling to ensure continuous, uninterrupted operational coverage of all shift functions. • Identify training and career development opportunities for Operations Section staff and foster a safety-first, accountability-driven team culture.</p><p>Education • Bachelor's Degree, (Preferably in Aviation Management, Airport Operations, Aeronautical Science) Engineering, or a related discipline from a recognized institution. • A post-graduate qualification or diploma in Aviation/Airport Management is an added advantage) Experience • Minimum 6 years of progressive experience in airport airside operations, of which at least 2 years must be in a supervisory or senior Operational role with demonstrated shift management responsibility. • Proven experience in apron management, movement area operations, airside safety enforcement, and emergency/contingency coordination. • Experience across multiple Airside Operational functions is highly desirable. Computer Skills • Professional knowledge of Microsoft Suite (especially Word, PowerPoint and Excel) (Essential) • Demonstrated competency with various Airport Operations Management Systems (AODB, FIDS, stand planning tools), NOTAM databases, radio communication systems, and airside surveillance/CCTV platforms. Language Skills • English: solid written and spoken proficiency (Essential). English Language Proficiency - Minimum ICAO Level 4 or equivalent • Arabic: working proficiency (Desirable). Training Requirements • ICAO Annex 14 – Aerodromes (Essential). • ICAO Safety Management System (SMS) – ICAO-recognized institute (Essential). • Coordination of Emergency Response (Aerodrome Emergency Planning) (Essential). • Airside Driving Permit / Airside Driving Assessor certification (Highly Desirable). • Aerodrome Wildlife Hazard Management (Highly Desirable). • FOD Prevention Programme certification (Highly Desirable). • First Aid / Basic Life Support (Desirable).</p>

<p>Job Specification • Act as the primary liaison and first point of contact for ATC, RFF, Ground Handling Agents, Airlines, Engineering, and external stakeholders on all airside operational matters during the shift, escalating to the Head of Airside Operations where required. • Ensure strict enforcement of Airside Driving Regulations (ADR), Apron Discipline, and all active Airside Driving Permits (ADP) and Airside Vehicle Permits (AVP) throughout the shift; direct shift inspectors to act on violations and authorize the issuance of Non-Compliance Notices (NCN). • Coordinate and direct Wildlife Hazard Management activities during the shift, ensuring that wildlife observations are reported, logged, and acted upon in accordance with the Wildlife Hazard Management Plan, and that the runway and movement area remain safe for operations. • Oversee apron safety and operational discipline across all apron zones, including monitoring of ground handling activities, FOD prevention, fuel safety compliance, and resolution of apron. • Authorize and oversee emergency and contingency responses for airside-specific incidents during the shift — including runway/taxiway incursions, ground handling accidents, FOD alerts, fuel spills, airside vehicle accidents, and wildlife strikes — in accordance with the Airport Emergency Plan (AEP) and Airside Operations contingency procedures. • Complete, review, and submit comprehensive shift log reports capturing all significant events, incidents, operational decisions taken, and handover notes for each shift, ensuring accurate and auditable records for the Head of Airside Operations. • Conduct or delegate shift airside inspections of the movement area, apron, perimeter roads, and active worksites, ensuring compliance with ICAO Annex 14 standards, aerodrome certification requirements, and airport operational procedures. • Represent Airside Operations in real-time coordination calls, Airside Operations Room meetings, and pre/post-flight briefings during the shift as required. Human and Technical Resources • Direct and coordinate the full complement of Airside Operations shift staff across all sections for the duration of the shift, ensuring appropriate task allocation, coverage of all operational zones, and staff welfare. • Utilize the available management systems, stand planning tools, NOTAM databases, radio communication systems, and CCTV/surveillance platforms to maintain real-time situational awareness and operational control throughout the shift. • Ensure all shift operational vehicles and equipment are serviceable and deployed effectively; report unserviceable assets to the Head of Airside Operations and Engineering for immediate action. Planning and Programme • Review and brief all shift staff on the daily flight programme, scheduled airside works, active NOTAMs, planned closures, and any regulatory or safety advisories at shift commencement. • Contribute shift-level observations and operational data to the continuous improvement of Airside Operations procedures, SOPs, and contingency plans by providing structured feedback to the Head of Airside Operations. Core Operational Activities • Execute structured shift start and shift end handovers, ensuring all active permits, incidents, NOTAMs, ongoing works, and outstanding actions are clearly communicated and transferred to the incoming duty manager. • Authorize real-time operational decisions including temporary runway/taxiway restrictions, emergency equipment pre-positioning, and suspension of airside work activities when safety is at risk. • Coordinate the activation and stand-down of airside emergency responses for airside-specific incidents, ensuring all relevant parties (ATC, RFF, Ground Handlers, Engineering, airside operations team) are notified and deployed in accordance with the AEP. • Monitor and enforce FOD (Foreign Object Debris/Damage) prevention programmes across all apron and movement area zones, directing FOD inspections and ensuring immediate clearance of any identified debris. Human Resources Management • Provide direct line management, mentoring, and performance evaluation for all operational shift subordinates in alignment with the airport HR and competency framework. • Manage leave planning, duty rosters, and workforce scheduling to ensure continuous, uninterrupted operational coverage of all shift functions. • Identify training and career development opportunities for Operations Section staff and foster a safety-first, accountability-driven team culture.</p><p>Education • Bachelor's Degree, (Preferably in Aviation Management, Airport Operations, Aeronautical Science) Engineering, or a related discipline from a recognized institution. • A post-graduate qualification or diploma in Aviation/Airport Management is an added advantage) Experience • Minimum 6 years of progressive experience in airport airside operations, of which at least 2 years must be in a supervisory or senior Operational role with demonstrated shift management responsibility. • Proven experience in apron management, movement area operations, airside safety enforcement, and emergency/contingency coordination. • Experience across multiple Airside Operational functions is highly desirable. Computer Skills • Professional knowledge of Microsoft Suite (especially Word, PowerPoint and Excel) (Essential) • Demonstrated competency with various Airport Operations Management Systems (AODB, FIDS, stand planning tools), NOTAM databases, radio communication systems, and airside surveillance/CCTV platforms. Language Skills • English: solid written and spoken proficiency (Essential). English Language Proficiency - Minimum ICAO Level 4 or equivalent • Arabic: working proficiency (Desirable). Training Requirements • ICAO Annex 14 – Aerodromes (Essential). • ICAO Safety Management System (SMS) – ICAO-recognized institute (Essential). • Coordination of Emergency Response (Aerodrome Emergency Planning) (Essential). • Airside Driving Permit / Airside Driving Assessor certification (Highly Desirable). • Aerodrome Wildlife Hazard Management (Highly Desirable). • FOD Prevention Programme certification (Highly Desirable). • First Aid / Basic Life Support (Desirable).</p>

<p>Job description: • The incumbent is responsible for the management and supervision of all airside operations activities at Karbala International Airport (KIA), requiring specific technical competencies, skills and behavioral attributes, ensuring a safe, secure and efficient airside environment in full compliance with applicable national regulations and ICAO SARPS, including oversight of airside safety, permits and licensing, wildlife and landscaping and standards training and development Sections. Human and Technical Resources • Ensures that subordinate Sections have the necessary and appropriate number of staff to provide the services and tasks within airside operations, and that they have received training on the competencies and skills required for their functions; • Determines and evaluates that the Sections within ASO Department have the necessary number and type of equipment required for operational tasks, that they are properly maintained, and that they are in good and safe operating condition; • Plans, coordinates and supervises the execution of all operational activities within the ASO Department, including AMG, SST, PEL and WLS Sections; • Implements and enforces the approved corporative policies within the Airside Operations Department; Planning and Programmes • Develop, implement and maintain the ASO Manuals and all associated airside standard operational procedures (SOPs), in compliance with ICAA ICAR 12, ICAO Annex 14 SARPs, and KIA requirements; ensure periodic review, update and formal approval of all operational documents. • Coordinate the preparation, review and approval of all ASO SOPs, and Work Instructions (WIs) for all sections (AMG, SST, PEL and WLS), ensuring alignment with the AOM and applicable regulatory requirements. • Develop and maintain the ASO Annual Training Programme, covering initial qualification, recurrent and competency-based training for all ASO staff, including airside safety, airside driving, wildlife hazard management and standards, in compliance with ICAA and ICAO SARPS. • Prepare and maintain the Airside Contingency Plan covering abnormal and disrupted airside operations scenarios, including runway and taxiway closures, FOD events, wildlife strikes, and airside emergencies; ensure alignment with the Airport Emergency Plan (AEP) and that all ASO staff are trained on their respective roles and procedures. • In coordination with the E&M Department, support the development of the ASO Equipment and Vehicle Maintenance Plan, defining preventive maintenance schedules, inspection cycles and replacement planning for all ASO operational equipment, airside vehicles and specialist tools assigned to the department. • Prepare and submit the annual ASO Plan, including operational objectives, KPIs, resource needs and CAPEX/OPEX proposals, aligned with airport strategic goals; monitor progress and report to the Airport Operations Director. Core Operational, Corporate and Compliance Activities • Develop, implement and review airside operational manuals, procedures and instructions to ensure safe and efficient airside operations at KIA. • Develop and implement airside operational procedures in compliance with ICAA ICAR 12 and other applicable regulations, and ICAO Annex 14 SARPS; • Manage and oversee all airside driver´s and vehicles permits licensing and activities, ensuring compliance with ICAA requirements and applicable airside regulations. • Manage the Wildlife Hazard Management Programme in accordance with ICAA reegulations and ICAO Doc 9137 Part 3, ensuring effective control of wildlife hazards on and around KIA airside area. • Oversee and monitor all the activities and airside works performed by contractors or subcontractors on the airside, providing escort whener required and necessary; • Liaise with the GHS Department, any other ground service providers, airlines, and other airside stakeholders, ensuring alignment with airside regulatory requirements and operational standards. • Develop and monitor airside operational performance metrics, KPIs and service level indicators, ensuring continuous improvement in airside safety and operational efficiency. • Participate in and support the airport committees established by ICAA and/or defined by ICAO, contributing as a subject matter expert on airside operations matters; • Serves as a member of the Airside Operations Department, on the Runway Safety Committee, and Safety and Environmental Committee (if established); • Serves as a member of the EOC and Airport Crisis Management Center; • Advises the Airport Operations Director on various technical/operational airside matters; • Prepares, coordinates and reviews airside-related correspondence with external agencies, regulators and other stakeholders; • Serves as a member of the Airside Operations Department management team and participates in planning for operational matters affecting the department’s activities; Human Resources Management • Promotes and systematically ensures the correct application of all company policies regarding human resources and corporate processes; • Coordinates and ensures the correct management of the tasks and human resources within the subordinate departments and Sections; • Conducts annual performance and competency reviews and ensures that all employees are adequately and properly trained and qualified to perform the assigned duties; • Manages and mobilizes human resources within the subordinate units to support emergency and contingency situations, as required by the Airport Emergency Plan and Security Program. • Ensures distribution and use of required Personal Protective Equipment (PPE) and monitors and reports all incidents and OHS situations to the Safety Office. • Manages the human resources of the Airside Operations Department and liaises with the Human Resources Department on all personnel matters, namely departmental needs, resignations, absences, disciplinary matters, etc; Budget and Activity Plans • Coordinates and reviews the department's annual OPEX budget and CAPEX investment proposals and revisions; • Consolidates and implements the department's annual plans, including training; • Consolidates and prepares the department activity report; • Conducts and coordinates annual performance reviews; • Replaces the Airport Operations Director on an interim basis, in the event of his absence or disability, by specific act of delegation. Quality and Environmental Management (QMS / EMS) • Ensures the establishment, implementation and maintenance of the SMS and EMS throughout the Airside Operations Department; • Approves the relevant SMS and EMS documents within the ASO Department, and coordinates the preparation and review of manuals, plans and operational procedures (SOPs), to submit to the Airport Operations Director for approval; • Ensures the implementation of the related airport Committees objectives and recommendations within the Airside Operations Department; Safety Management System (SMS) • Ensures the implementation of the SMS and safety policies as defined by the company within the Airside Operations Department; • Conducts Hazard / Risk Assessments and prepares Safety Action Plans accordingly in close coordination with the Safety Office; • Reports all potential hazards, safety concerns, incidents and accidents to the Safety Office and ensures that safety is an integral part of all activities and resulting responsibilities; • Serves as a member of KIA’s Aerodrome Safety Committee, Runway Safety Committee, and Wildlife Hazard Management Committee, as applicable.</p><p>Education • Bachelor’s degree in Airport/Aviation Management or related field (Master’s degree preferred). • IAP Accreditation (is a plus) Experience • Minimum 12 years of experience in international airport airside operations, at least 5 of which in managerial functions. Computer Skills • Knowledgeable in Microsoft Office suite (user´s perspective) • Able to manage other specific project/management software, provided adequate training. Language Skills • English: Solid written and spoken (essential) • Arabic: Desirable. Training Requirements • Certification in Airside Operations, SMS, or Airport Management from recognized aviation bodies (ACI, IATA, or ICAO). • Aerodrome/Airside Operations certification (e.g. ICAO, ACI) highly desirable. • A valid Category B Airside Driving Permit.( Highly Desirable)</p>