Cost Engineer Jobs in Iraq

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Design, install, commission, and maintain chilled &amp; frozen refrigeration systems ✅ Diagnose and resolve refrigeration system faults and technical issues ✅ Perform preventive and corrective maintenance to ensure optimal performance ✅ Monitor system efficiency and recommend energy-saving improvements ✅ Ensure compliance with safety regulations and industry standards ✅ Coordinate with clients, contractors, and project teams ✅ Prepare maintenance reports and technical documentation</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>✔ Bachelor's Degree/Diploma in Mechanical Engineering, Refrigeration Engineering, or a related field ✔ Proven experience with commercial or industrial chilled &amp; frozen refrigeration systems ✔ Strong knowledge of compressors, condensers, evaporators, cold rooms, and refrigeration controls ✔ Experience with ammonia (NH₃) and/or Freon-based systems is an advantage ✔ Ability to read technical drawings and troubleshoot complex refrigeration systems</p><p></p></section>

<p><b>Job Objectives/Project context:</b></p><p><br></p><p>The project is a gas plant located in Iraq, delivered under a DBOOM (Design, Build, Own, Operate, Maintain) contract. The Construction phase and Mechanical Completion are ongoing, Commissioning to be started very sooner. An experienced reinforcement is required to support the Commissioning &amp; Start-Up Manager, drive contractors across all disciplines and accelerate activities in fast-track mode, with no compromise on safety or quality.</p><p><br></p><p>Key Responsibilities:</p><p><br></p><p>Monitoring &amp; driving: Ensure day-to-day monitoring of contractors’ progress across all disciplines (ICSS, mechanical, electrical, instrumentation, HVAC, utilities…).</p><p>Acceleration: Challenge contractors, identify bottlenecks, enforce priorities and push teams to meet commissioning milestones.</p><p>Methodology: ORBIT methodology is considered for this project for the follow up of (subsystems, ITR, punch lists, MC/RFCC, completion dossiers).&nbsp;</p><p>Documentation: To make sure of the readiness of procedure and dossier to be ready for the activities. Review and validate commissioning procedures, JSA, energization dossiers, LoTo, PSSR…And to prepare all the handover of the phase Precom - Commissioning.</p><p>Coordination: Coordinate Mechanical Completion, pre-commissioning, commissioning and start-up activities while securing interfaces and SIMOPS.</p><p>Reporting: Run daily and weekly review meetings with Construction, CSU and Company Representative.</p><p>Handover: Deliver the closure of punch lists (A/B), remarks clearance and handover to operations.</p><p>&nbsp;</p><p><b>Qualifications</b></p><p><br></p><p><br></p><p>Expected:</p><p><br></p><p>Engineering degree (MSc / BSc) in chemical, mechanical, electrical, instrumentation engineering or equivalent.</p><p>Experience:</p><p><br></p><p>Experience: Minimum 15 years of experience in commissioning and start-up of Oil &amp; Gas / LNG / petrochemical facilities.</p><p>Projects: Proven track record on at least two (2) gas plant, LNG or refinery projects delivered in fast-track mode.</p><p>Methodology: knowledge of OPERCOM and Orbit is a plus.</p><p>Environment: Previous experience working for a major international operator and managing multi-discipline contractors.</p><p>Technical Skills:</p><p><br></p><p>In-depth knowledge of subsystems, ITR, MC, RFCC, punch lists and system completion.</p><p>Full command of HSE, ATEX, PtW, LoTo, safety inhibition and PSSR procedures.</p><p>Strong understanding of process equipment, rotating, HV/LV electrical, F&amp;G, ESD/PSD and ICSS systems.</p><p>Proficiency with completion management tools (ICAPS or equivalent).</p><p>Personal Qualities:</p><p><br></p><p>Leadership: Ability to challenge contractors and enforce priorities.</p><p>Adaptability: Comfort in fast-track, multicultural and high-pressure environments.</p><p>Rigor: Strong reporting discipline, documentation rigor and clear communication.</p><p>Diplomacy: Team spirit and diplomacy at Company / EPC / Vendor interfaces.</p><p>Languages:</p><p><br></p><p>Fluent professional English (mandatory).</p><p>French appreciated. Arabic is a plus.</p><p>Conditions:</p><p><br></p><p>Site-based assignment in Iraq, Rotational.</p><p><strong>Desired Candidate Profile</strong></p><p><br></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>About Zaincash ZainCash Iraq is a leading mobile wallet in Iraq and recognized as Forbes top Fintech company of 2023 and 2024 as well as GSMA’s Best Mobile Innovation Supporting Humanitarian Situations.<br> The company offers a range of consumer and business services including local and international money transfer, bill payments, companion payment cards, payroll, aid disbursement, and more.<br> For more information, please visit www.<br>zaincash.iq. Responsibilities: Conduct thorough testing of software applications (web and mobile) to ensure compliance with quality standards, Record test results.<br> Develop and execute comprehensive test plans, test cases, and test scripts to validate functionality, performance, and usability.<br> Identify, document, and report software defects; collaborate with developers to ensure timely resolution.<br> Perform regression testing to confirm that resolved issues remain fixed in subsequent releases.<br> Provide constructive feedback to improve overall software quality and user experience.<br> Collaborate with cross-functional teams (development, system administration, product management) to resolve technical challenges during the software development lifecycle.<br> Manage and prioritize incidents requiring specialized technical expertise based on business impact and severity Bachelor’s degree in computer science, Engineering, or related field, or equivalent work experience.<br> Minimum 1 year of experience in software quality assurance and testing methodologies.<br> Proven experience with web and mobile application testing.<br> Familiarity with Agile development methodologies and tools (e.<br>g., Jira, Scrum) is a plus.<br> Good understanding of software QA methodologies, tools, and processes.<br> For example manual testing, automated testing.<br> Experience with test automation frameworks and scripting languages (e.<br>g., Python, Shell) is a plus.<br> Proficiency in troubleshooting and diagnosing technical issues</span> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>• Applying and following the client contractual QHSE obligations, PSGS’ QHSE policy and procedures.</p><p>• Maintaining the integrity of the ISO Management Documentation System and standards of ISO 9001, ISO 14001, ISO 22000, &amp; ISO 45001.</p><p>• Maintaining, repairing and installing plumbing and related fixtures and components, as well as appliances and trims.</p><p>• Repairing piping of various sizes and types.</p><p>• Checking safety equipment and replacing components such as washers, gaskets and filters.</p><p>• Inspecting, repairing or replacing pumps, valves and boiler systems.</p><p>• Monitoring work done by outside contractors for adherence to Plumbing Code Requirements and reporting back to direct manager.</p><p>• Installing supports and hangers for pipes, fixtures and equipment.</p><p>• Assembling and installing valves and fittings.</p><p>• Installing, repairing and maintaining water treatment equipment, piping and controls.</p><p>• Testing pipe systems and fixtures for leaks.</p><p>• Ensuring all installations, repairing and maintenance meet the requirements of the appropriate codes.</p><p>• Maintaining good relationship with the client to accomplish ongoing tasks in a timely manner.</p><p>• Ensuring all installations, repairs and maintenance meet environmental protection requirements.</p><p>• Maintaining appropriate service and repair records.</p><p>• Performing preventive/corrective maintenance and call-off activities on daily, weekly and monthly basis and ensuring that the company avoids any liquidated damages.</p><p>• Controlling the inventory for related equipment parts and supplies.</p><p>• Preparing Permit to Work and daily/weekly/monthly reports and sharing them with the management.</p><p>• Preparing estimation for call-off works and sharing it with the management.</p><p>• Coordinating with the client on regular basis for related works and assisting in completing the third-party request.</p><p>• Performing other duties as directed.</p><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>·&nbsp;&nbsp;&nbsp;Diploma in Mechanical or Trade Certificate or a similar discipline</p><p>·&nbsp;&nbsp;&nbsp;5+ years in a similar role, Middle East experience preferred</p><p>·&nbsp;&nbsp;&nbsp;Must understand regulatory compliance and be able to maintain and submit any documentation required</p><p>·&nbsp;&nbsp;&nbsp;Fluent in English, Arabic is an added value</p><p>·&nbsp;&nbsp;&nbsp;Computer literate</p><p><br></p></div>

<p>Job Responsibilities:<br>1. Inspect machine room power distribution, UPS circuits, cabinet power distribution, earthing resistance and environmental facilities to confirm all weak current systems meet preconditions for power-on commissioning.<br>2. Organize standalone power-on, equipment configuration, protocol docking and point-by-point commissioning for airport integrated security, building automation, structured cabling, information network, information integration, security screening, baggage handling, clock, stand guidance, flight information display, public address, CCTV monitoring and perimeter alarm systems.<br>3. Arrange on-site attendance during full-airport weak current system trial operation; conduct daily inspections of platform online status, terminal online rate, link connectivity and equipment operating conditions.<br>4. Record a defect ledger during trial operation; continuously rectify issues including system lag, offline devices, false alarms, linkage failures and abnormal video images to ensure stable long-term operation of all weak current systems compliant with airport trial operation standards and support smooth operational transition.<br>5. Cooperate with the client, airport operation &amp; maintenance team and supervision consultants to conduct full-system function re-inspection, random point sampling and scenario linkage acceptance tests.<br><br>Job Requirements:<br>1. Bachelor’s degree or above, major in Electrical Engineering, Automation or related fields; graduates from 985/211 universities are preferred.<br>2. Fluent in English.<br>3. Minimum 3–5 years of commissioning and operational experience on at least one 4D or higher-class civil aviation airport.<br>4. Proficient in technical standards and specifications issued by ICAO (International Civil Aviation Organization) and CAAC (Civil Aviation Administration of China).<br>5. Capable of multi-system interface coordination; able to resolve issues involving system communication, protocol docking and building automation.<br>6. Experience in commissioning weak current systems, information integration, BHS baggage handling, security inspection, ATC, meteorology and related systems.<br>7. Strong communication and coordination skills, high sense of responsibility, excellent execution and team spirit.8. Good physical health and willingness to work overseas.</p>

<p>Job Responsibilities:</p><p>1. Review installation quality of ATC equipment and complete pre-power-on acceptance; verify power supply, signal links and earthing systems to meet civil aviation standards for equipment power-on commissioning.</p><p>2. Conduct standalone power-on, hardware self-test, program loading, parameter configuration and functional commissioning for VHF air-ground communication, intercom dispatching, ATC recording, secondary radar surveillance, surface surveillance and ATC automatic processing systems.</p><p>3. &nbsp;Perform cross-discipline joint commissioning across multiple systems to realize data interconnection, business linkage and signal synchronization among ATC automation, radar surveillance, air-ground communication and dispatching intercom systems.</p><p>4. Test main/standby redundancy switching, fault alarms, emergency switchover and business fault tolerance functions to ensure uninterrupted air traffic control operations.</p><p>5. Support flight calibration of ATC systems, track calibration parameters, optimize equipment settings and rectify non-compliant items to align with civil aviation operational technical standards.</p><p>6. &nbsp;Provide on-site support during the trial operation of full ATC systems; real-time monitor radar targets, air-ground communication channels, automated flight tracks and dispatching workstation status.</p><p>&nbsp;</p><p>Job Requirements:</p><p>1. Bachelor’s degree or above, major in Electrical Engineering, Automation or related fields; graduates from 985/211 universities are preferred.</p><p><strong>2. </strong>Fluent in English.</p><p><strong>3. </strong>3Minimum 3–5 years of commissioning and operational experience on at least one 4D or higher-class civil aviation airport.</p><p><strong>4. </strong>4Proficient in technical standards and specifications issued by ICAO (International Civil Aviation Organization) and CAAC (Civil Aviation Administration of China).</p><p><strong>5. </strong>Capable of multi-system interface coordination; able to resolve issues involving system communication, protocol docking and building automation.</p><p><strong>6. </strong>Experience in commissioning weak current systems, information integration, BHS baggage handling, security inspection, ATC, meteorology and related systems.</p><p>&nbsp;</p><p><strong>7. </strong>Strong communication and coordination skills, high sense of responsibility, excellent execution and team spirit.8. Good physical health and willingness to work overseas.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Conduct thorough testing of software applications (web and mobile) to ensure compliance with quality standards, Record test results. Develop and execute comprehensive test plans, test cases, and test scripts to validate functionality, performance, and usability. Identify, document, and report software defects; collaborate with developers to ensure timely resolution. Perform regression testing to confirm that resolved issues remain fixed in subsequent releases. Provide constructive feedback to improve overall software quality and user experience. Collaborate with cross-functional teams (development, system administration, product management) to resolve technical challenges during the software development lifecycle. Manage and prioritize incidents requiring specialized technical expertise based on business impact and severity</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelor s degree in computer science, Engineering, or related field, or equivalent work experience. Minimum 1 year of experience in software quality assurance and testing methodologies. Proven experience with web and mobile application testing. Familiarity with Agile development methodologies and tools (e.g., Jira, Scrum) is a plus. Good understanding of software QA methodologies, tools, and processes. For example manual testing, automated testing. Experience with test automation frameworks and scripting languages (e.g., Python, Shell) is a plus. Proficiency in troubleshooting and diagnosing technical issues</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Under general supervision from the Production Manager, The Production Supervisor works in a multi-discipline Asset Operations Team to develop potentially large and challenging unconventional plays and mature oil and gas fields. Identifies innovative ways to apply HAL technology, service capability and expertise within the context of understanding the reservoir, production and facilities to design new, step-change field exploitation methodologies. Integral member of the multi-discipline Production Team comprised of a reservoir engineer, production geologist and field personnel team. Analyzes production history, well files, production equipment and decline curve analysis and nodal analysis of well performance to estimate remaining recoverable reserves, production and cost of upgrading equipment. Selects and implements production technology, service capability and expertise including completion systems comprised of tubing selection, perforating, sand control and fine migration, matrix stimulation, water control and hydraulic fracturing; artificial lift equipment comprised of sucker-rod lift, gas lift, electrical submersible pumps, subsurface hydraulic pumps, progressing-cavity pumps and plunger lift; real-time surveillance and monitoring systems and waterflooding and other enhanced recovery techniques. Uses decline curve analysis and nodal analysis to identify workovers or recompletions candidates and to select and upgrade production equipment. Focuses on maintaining and increasing daily production through optimizing well performance and field operations while controlling operating costs. Performs daily field operations including optimizing well behavior, production, water disposal, chemical injection and treatment, waterflood performance and artificial lift systems. Evaluates proposed modifications to equipment or to operating procedures to improve safety, efficiency and reliability of equipment and ensures all modifications meet statutory and Company standards. Develops and maintains good working relationships with Production Team through effective communication and teamwork.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Requires excellent communication skills and the ability to work closely with geologists, engineers, contractors and asset teams to successfully execute projects from concept to operation; over time, incumbent will become very knowledgeable of HAL technologies and solutions experience together with the exploitation methodologies and technologies that other companies apply. Requires an undergraduate degree and a minimum of eight (8) years of industry experience. Degree in geology or engineering is preferred. Halliburton is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation .</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span> <span></span></span><p>We are looking for the right people — people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world’s largest providers of products and services to the global energy industry.</p><br><b>Job Duties</b> <br><p>Under general supervision from the Production Manager,</p><br> <ul> <li>The Production Supervisor works in a multi-discipline Asset Operations Team to develop potentially large and challenging unconventional plays and mature oil and gas fields.</li> <li>Identifies innovative ways to apply HAL technology, service capability and expertise within the context of understanding the reservoir, production and facilities to design new, step-change field exploitation methodologies.</li> <li>Integral member of the multi-discipline Production Team comprised of a reservoir engineer, production geologist and field personnel team.</li> <li>Analyzes production history, well files, production equipment and decline curve analysis and nodal analysis of well performance to estimate remaining recoverable reserves, production and cost of upgrading equipment.</li> <li>Selects and implements production technology, service capability and expertise including completion systems comprised of tubing selection, perforating, sand control and fine migration, matrix stimulation, water control and hydraulic fracturing; artificial lift equipment comprised of sucker-rod lift, gas lift, electrical submersible pumps, subsurface hydraulic pumps, progressing-cavity pumps and plunger lift; real-time surveillance and monitoring systems and waterflooding and other enhanced recovery techniques.</li> <li>Uses decline curve analysis and nodal analysis to identify workovers or recompletions candidates and to select and upgrade production equipment.</li> <li>Focuses on maintaining and increasing daily production through optimizing well performance and field operations while controlling operating costs.</li> <li>Performs daily field operations including optimizing well behavior, production, water disposal, chemical injection and treatment, waterflood performance and artificial lift systems.</li> <li>Evaluates proposed modifications to equipment or to operating procedures to improve safety, efficiency and reliability of equipment and ensures all modifications meet statutory and Company standards.</li> <li>Develops and maintains good working relationships with Production Team through effective communication and teamwork.&nbsp;</li> </ul><br><br><b>Qualifications</b> <br><ul> <li>Requires excellent communication skills and the ability to work closely with geologists, engineers, contractors and asset teams to successfully execute projects from concept to operation; over time, incumbent will become very knowledgeable of HAL technologies and solutions experience together with the exploitation methodologies and technologies that other companies apply.</li> <li>Requires an undergraduate degree and a minimum of eight (8) years of industry experience. Degree in geology or engineering is preferred.</li> </ul><br><br><br><p><strong>Halliburton is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation</strong>.</p><br> <p><strong><u>Location</u></strong></p><br> <p>Oils Opertion ST,N°29 Burjesia,&nbsp;Basra,&nbsp;Basrah,&nbsp;61001, Iraq</p><br> <p><strong><u>Job Details</u></strong></p><br> <p><strong>Requisition Number:</strong>&nbsp;210433&nbsp;&nbsp;<br><strong>Experience Level:&nbsp;</strong>Experienced Hire&nbsp;<br><strong>Job Family:</strong>&nbsp;Operations&nbsp;<br><strong>Product Service Line:&nbsp;</strong>Halliburton Project Management&nbsp;&nbsp;&nbsp;<br><strong>Full Time / Part Time:&nbsp;</strong>Full Time</p><br> <p><strong>Additional Locations for this position:&nbsp;</strong></p><br> <p><u><strong>Compensation Information</strong></u><br>Compensation is competitive and commensurate with experience.</p><br> </div>

<p><h4>Job description</h4> <p><strong>Division:</strong> CSSP (Ratawi Hub – Iraq)<br> <strong>Direction:</strong> PCM</p> <h4>Situation in organization</h4> <p>The Reporting Engineer position is within the Project Control Organization of the project reporting to the Planning & Reporting Manager.</p> <h4>Job dimensions</h4> <p>The Reporting Engineer is responsible for collecting, analyzing, and presenting project performance data to support decision-making and ensure transparency across all phases of the CSSP project. The role contributes to the timely and accurate delivery of internal and external reports, dashboards, and KPIs, including HSE and risk-related metrics.</p> <p>In addition, the Reporting Engineer is responsible for supporting project digitalization and information management initiatives, ensuring the effective governance, quality, accessibility, and integration of project information across all participating organizations. The position oversees the Information Management Assistant function and promotes the efficient use of digital collaboration platforms, reporting systems, document management tools, and data-sharing solutions to enhance project execution and stakeholder alignment.</p> <p>The role acts as a focal point between Project Controls, Engineering, Construction, HSE, Contractors, and Company stakeholders to ensure consistency, traceability, and reliability of project data and information throughout the project lifecycle.</p> <p>Iraq Common Seawater Supply Project (CSSP) intends to provide treated seawater to the oil fields in southern Iraq (for injection). CSSP is composed of water pipelines which are part of Basra Oil Company (BOC) scope of work, and the Water Infrastructure Project (WIP), previously named STF (Seawater Treatment Facilities). The WIP will be located on the west side of the Khor Al Zubair, upstream of the port of Umm Qasr.</p> <p>The major components of the WIP include seawater intake and outfall structures, material offloading facility, seawater clarification, filtration and deoxygenating processes, shipping pumps, a fuel gas pipeline, power generation, utilities and non-process.</p> <p>The budget of the WIP is circa $3 billion.</p> <p>The Reporting Engineer is expected to commence duties in the 3rd quarter of 2026 and will be based in Basra.</p> <h4>Activities</h4> <p><strong>1- Reporting & Analysis</strong><br> <li>Collect and validate progress data from various project disciplines (engineering, procurement, construction, HSE, etc.).</li> <li>Prepare and update weekly/monthly progress reports, dashboards, and executive summaries.</li> <li>Track and report key performance indicators (KPIs), including physical progress, productivity, and forecasted completion dates.</li> <li>Support the Planning & Reporting Manager in preparing presentations for internal and external stakeholders.</li> <li>Ensure consistency and traceability of reporting documentation across all project phases.</li></p> <p><strong>2- HSE & Risk Reporting</strong><br> <li>Monitor and report HSE performance indicators (e.g., LTIs, TRIR, safety observations) in coordination with HSE teams.</li> <li>Maintain and update HSE dashboards and integrate safety metrics into overall project reporting.</li> <li>Assist in compiling and presenting periodic risk assessments and mitigation tracking.</li></p> <p><strong>3- Systems & Tools</strong><br> <li>Use reporting tools such as Power BI, Excel, Word, PowerPoint, and project control systems to generate visualizations and reports.</li> <li>Ensure data integrity and alignment between planning, cost control, and reporting systems.</li></p> <p><strong>4- Documentation & Compliance</strong><br> <li>Ensure compliance with TotalEnergies, BOC, and project standards for reporting procedures.</li> <li>Support audits, reviews, and project evaluations by providing accurate and timely reporting documentation.</li> <li>Coordinate with internal departments (Planning, Cost Control, Contracts, HSE) to ensure reporting accuracy.</li></p> <p><strong>5- Information Management & Digitalization</strong><br> <li>Lead project information management and digitalization activities.</li> <li>Supervise the Information Management Assistant and oversee project information, data, and records management.</li> <li>Ensure information quality, consistency, accessibility, and traceability across all project stakeholders.</li> <li>Coordinate information exchange between Company and Contractors.</li> <li>Support and optimize digital tools and platforms, including SharePoint, Power BI, and document management systems.</li> <li>Develop and maintain project data repositories, dashboards, and reporting systems.</li></p> <h4>Context and environment</h4> <p>TotalEnergies is acting as contractor to BOC. After the completion of the project, the facilities will be handed over to BOC for operation.</p> <h4>Accountabilities</h4> <p>The Reporting Engineer is responsible for collecting, analyzing, and presenting project performance data while ensuring effective information management and digital collaboration across the CSSP project. The role drives reporting excellence, supports project digitalization initiatives, supervises the Information Management Assistant, and ensures that project information is accurate, accessible, integrated, and available to support timely decision-making across all stakeholders.</p> <h4>Qualifications / Experience required</h4> <li>Degree in engineering, data analytics, or related field.</li> <li>Minimum 5 years of experience in project reporting within large-scale industrial or oil & gas projects.</li> <li>Strong analytical and data visualization skills.</li> <li>Proficiency in reporting tools (Power BI, Excel, Word, PowerPoint, etc.).</li> <li>Experience in information management or project data management.</li> <li>Understanding of data governance and information quality principles.</li> <li>Good communication and organizational skills.</li> <li>Ability to work in a multicultural and high-pressure environment.</li> <li>Experience in engineering/construction commercial or contracts administration role.</li> <li>Ability to listen to and understand the signals and queries from various interlocutors.</li> <li>Languages: English is mandatory; knowledge of French and Arabic is a plus.</li></p><p></p>

<ul><li><p>Define and lead drilling, completion, and well intervention strategies.</p></li><li><p>Oversee multi-rig drilling and well operations.</p></li><li><p>Ensure safe, efficient, and cost-effective well delivery.</p></li><li><p>Manage well integrity and operational risks.</p></li><li><p>Lead drilling contracts and supplier management.</p></li><li><p>Manage budgets, forecasts, and DrillEx performance.</p></li><li><p>Align drilling activities with project schedules.</p></li><li><p>Drive technical governance and performance improvement.</p></li><li><p>Represent the company with partners, authorities, and headquarters.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Master's degree in Petroleum Engineering or an equivalent discipline.</p></li><li><p>Minimum of 15 years of experience in drilling and well operations.</p></li><li><p>Strong expertise in drilling, completions, and well integrity.</p></li><li><p>Proven experience managing multi-rig operations and complex well programs.</p></li><li><p>In-depth knowledge of risk management and well control practices.</p></li><li><p>Strong executive leadership, strategic decision-making, and team management skills.</p></li><li><p>Excellent negotiation, communication, and stakeholder management capabilities.</p></li><li><p>Demonstrated ability to operate effectively in complex, high-risk environments.</p></li><li><p>Experience working on large-scale international oil and gas projects.</p></li><li><p>Exposure to multicultural, high-performance work environments.</p></li><li><p>Fluent in English and Arabic (mandatory); proficiency in French is an advantage.&nbsp;</p></li></ul>

<p><h4>Belong, connect, grow, with KBR!</h4> <p>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</p> <p>KBR provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Deputy finance manager – IFMS contract (Majnoon oil field)</h4> <h4>Position overview</h4> <p>Located at the Majnoon Oil Field in Iraq, this role is responsible for leading overall controller and cost recovery functions for KBR on the Integrated Field Management Service (IFMS) Contract. The F&A Manager ensures timely and accurate financial transactions review, invoice generation, and optimized cash flow.</p> <p>The role ensures robust financial governance, accurate reporting, and strong compliance with internal controls and contractual obligations.</p> <h4>Key responsibilities</h4> <p><strong>Cost recovery process</strong><br> Oversee cost recovery operations.<br> Hold overall responsibility for the end-to-end cost recovery process, including management of payments and collections.<br> Ensure client billings are accurate, timely and compliant with the contract.<br> Manage working capital.</p> <p><strong>Risk management & assurance</strong><br> Supervise risk management and assurance operations.<br> Lead financial risk management activities.<br> Conduct policy and compliance audits.<br> Ensure external compliance.<br> Drive internal reviews and audits.<br> Strengthen control systems.</p> <p><strong>Internal reporting</strong><br> Oversee accounting operations and ensure accurate financial reporting.<br> Manage monthly and quarterly close processes.<br> Monitor financial performance and provide analysis.<br> Ensure integrity of financial records.<br> Lead the development of annual budgets and multi-year plans.</p> <p><strong>Team leadership / development</strong><br> Lead, manage and develop a team of approximately 30 people.</p> <h4>Qualifications & experience</h4> <p>Bachelor’s degree required; a professional accounting certification is preferred.<br> Minimum 10 years of finance experience, ideally within the oil & gas or energy sector.<br> Leadership experience.<br> Experience working in remote site environments or large upstream projects is beneficial.<br> Strong communication skills with ability to influence non-financial stakeholders.</p></p><p></p>

<p>Under the overall guidance of the Project Manager and the direct supervision of the Lead Civil Engineer, the Civil Engineer is required to perform the following specific duties and responsibilities ensuring their effectiveness, transparency, and integrity:</p> <p>Plan, supervise, and manage the implementation of rehabilitation and/or construction works, ensuring alignment with project requirements, timelines, and budgets.</p> <p>Responsible for implementation and contributing to the preparation of the bill of quantities, as-built and construction drawings, Specifications and other engineering documents.</p> <p>Responsible for day-to-day site visit of the construction works, coordination with the contractors and suppliers according to the needs and requirements on site; Inspects and report on contractor s works in progress ensuring that the contractor meets client`s quality standards and implement the contract in accordance with the regulations.</p> <p>Provide support and guidance to the contractor and assists in resolving site problems, as necessary; Assist in the preparation of project plans, detailed schedules, and progress reports, and contribute to project closure activities and documentation.</p> <p>Responsible for supervision of site technical staff and consultants assigned to the project, and the assignment and monitoring of duties during the progress of works; Liaise with relevant government authorities, beneficiaries, and stakeholders to facilitate permits, secure approvals, and maintain effective working relationships.</p> <p>Embed sustainability dimensions including social and gender inclusion, as well as Health, Safety, Security, and Environmental (HSSE) aspects into the project during the design and construction phases; Ensure PSEA measures are implemented throughout the project implementation, as per the country PSEA action plan; Perform other related duties as required by the Project Manager.</p> <p>Supervise and monitor contractors setting-out and construction activities, ensuring full compliance with contract specifications, approved work plans, and project requirements in terms of scope, timeline, and budget; Conduct daily site visits to monitor work progress, identify issues, and propose practical engineering solutions in coordination with the Project Manager and Lead Civil Engineer; Responsible for preparation of progress reports on construction activities, according to the agreed timeframe of works and submission of such on a weekly basis to the Project Manager; Assess and report on the project closing plans, archiving of cost and progress report and hand over all related reports to the Project Manager; Evaluate and assess work schedules and programmes, including the comparison with the schedule baselines and reports to the Project Manager accordingly; Check all laboratory reports, operation and maintenance manuals, and keep records and report to the Project Manager accordingly; Assess the work activities of contractor/s, measure completed work, and make recommendations to the Project Manager for progress payments to contractors.</p> <p>Carry out on-site technical inspections and assessments to ensure that all construction activities comply with client`s quality standards and approved project specifications. Maintain accurate records and compile periodic and ad hoc reports in accordance with client`s procedures and reporting requirements.</p> <p>Conduct site inspections, testing, and quantity verification, and review/approve technical submittals including shop drawings, material approvals, and as-built documentation. Maintain records, compile periodic reports and any specific reports required by client`s standard procedures; Responsible for the preparation and verification of a database for the available materials shipped to the project, schedules of labor force, and monitoring of quality of such during the progress of works; Check, verify and approve the interim payments submitted by the Contractor/s and submit detailed reports to the Project Manager.</p> <p>Maintain accurate records of site activities, inspections, incidents and progress, ensuring timely submission of reports (weekly/monthly/quarterly). Support project closure through commissioning, handover and archiving of construction documentation. Assist in compiling periodic and specific reports, and ensure all project documentation is up-to-date and properly filed. Support the Project Team in overseeing change controls, risk and issue registers, and ensure timely and accurate reporting on project progress.</p> <p>Ensure that lessons learned and challenges are documented throughout the project implementation and shared with the project team; Participate in knowledge-sharing initiatives and contributing insights and lessons learned.</p> <p>Project reporting Civil Engineer will be reporting to Lead Civil Engineer and/or Project Manager (PM)</p><p><strong>Desired Candidate Profile</strong></p><h3>Key competencies</h3> <p>A minimum of 2 years of experience in development and coordination within agricultural, water resources , or related projects, particularly in irrigation (Open Channels and Closed Pipe System) and water-related activities, is required. Experience in site supervision, as well as monitoring and evaluation, is required. Experience working on international and/or local projects in conflict-affected areas is preferred. Experience in implementing and delivering projects for international organizations is considered an asset. Experience in report writing, data analysis, and document drafting is desirable. Experience in Health and Safety Management is desirable. Experience in quality assurance and quality control (QA/QC) for infrastructure projects is desirable. Experience working in the southern governorates is desirable.</p> <h3>Team management</h3> <p>This role has no team management</p> <h3>Further information</h3> <p>Disclaimer: At no stage of the recruitment process will CTG ask candidates for a fee. This includes during the application stage, interview, assessment and training. CTG has a zero tolerance to Sexual Exploitation and Abuse (SEA) which is outlined in its Code of Conduct. Protection from SEA is everyone s responsibility CTG encourages all candidates applying for this advertisement to ensure that their candidate profile is up to date with up to date experience / education / contact details, as this will help you being considered further in your application for this role.</p>

<p>Wood is recruiting for a Project Engineer (Local National Arabic Speaker) to join its Iraq business unit focusing on supporting a portfolio of construction based minor EPC and maintenance repair order projects. This role is a full-time on-site role in Kirkuk, Iraq with travel requirement. Reports to: Senior Project Manager Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy &amp; Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com Diversity Statement We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws. What makes you remarkable? At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world s most critical challenges. Expected: Demonstrable experience in the management of multi-disciplined construction focused minor EPC and maintenance repair order projects. Practiced in project control mechanisms and with commercial and technical risk assessments Excellent communications skills. Practitioner in risk management processes. Strong effective delegation skills. Wood is recruiting for a Project Engineer (Local National Arabic Speaker) to join its Iraq business unit focusing on supporting a portfolio of construction based minor EPC and maintenance repair order projects. This role is a full-time on-site role in Kirkuk, Iraq with travel requirement. Reports to: Senior Project Manager #Wood #Iraq #Kirkuk #Project Engineer The role This is an exciting opportunity for an experienced Project Engineer to join our Iraq Business Unit. Our Clients and Projects Designing the future. Transforming the world. Wood is an integral part of operations in Iraq, and we are continuing to grow our footprint across the country. With a 90-year heritage, 10 major contracts and over 850 employees, we have the skills, expertise and asset knowledge to support clients to deliver energy security and decarbonisation ambitions. Wood excels in supporting our clients to deliver complex upstream and midstream oil and gas projects in Iraq delivering maintenance, modifications and engineering solutions. We are committed to decarbonising existing assets, producing cleaner energy and developing a sustainable national workforce, ensuring the long-term growth of the region. What we can offer Meaningful and interesting projects Delivered to high profile clients and complex projects in Iraq Commitment to Diversity and Inclusion ; we are an organisation actively committed to diversity and inclusion across our business with employee networks committed to giving all employees a voice Competitive salary with regular salary reviews to ensure we are rewarding at the right level in line with the market Medical Insurance: Ensures inpatient and outpatient medical care is available should you require treatment. Commitment to continued professional development; development plans that are tailored to your individual needs and interests Global connections : join experts around the world who are at the leading edge of our industry, shaping the standards of our profession Long Service Award: Wood values the commitment and loyalty of our people. Celebrating Long Service provides an opportunity for the business to demonstrate their appreciation of the hard work, dedication and many years services of our employees at 5-year service milestones Job Objectives: The objective of the role is to support a portfolio of construction biased minor EPC and maintenance repair order projects. This includes leading a small group of multi-discipline construction engineers and subcontractors where applicable to complete the full lifecycle of the project following the Project Management Framework. Accountable for: Delivery of a portfolio of minor EPC and maintenance repair order projects Management and coordination of local supply chain partners Project execution and governance compliance Defining project execution strategies Application of project change control practices and procedures Monitoring and control of portfolio performance Maintaining cost awareness by all project personnel throughout all phases of project execution Ownership of project reporting Leadership and management of their project portfolio Identifying and managing critical issues Proactive risk management and reporting Preparation of Early Warning Notices and Compensation Events Responsible for:&nbsp;</p><p><strong>Desired Candidate Profile</strong></p><p>Demonstrable experience in the management of multi-disciplined construction focused minor EPC and maintenance repair order projects. Practiced in project control mechanisms and with commercial and technical risk assessments Excellent communications skills. Practitioner in risk management processes. Strong effective delegation skills.</p>

<p><h4>Belong, connect, grow, with KBR!</h4> <p>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</p> <p>KBR provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Deputy finance manager – IFMS contract (Majnoon oil field)</h4> <h4>Position overview</h4> <p>Located at the Majnoon Oil Field in Iraq, this role is responsible for leading overall controller and cost recovery functions for KBR on the Integrated Field Management Service (IFMS) Contract. The F&A Manager ensures timely and accurate financial transactions review, invoice generation, and optimized cash flow.</p> <p>The role ensures robust financial governance, accurate reporting, and strong compliance with internal controls and contractual obligations.</p> <h4>Key responsibilities</h4> <p><strong>Cost recovery process</strong><br> Oversee cost recovery operations.<br> Hold overall responsibility for the end-to-end cost recovery process, including management of payments and collections.<br> Ensure client billings are accurate, timely and compliant with the contract.<br> Manage working capital.</p> <p><strong>Risk management & assurance</strong><br> Supervise risk management and assurance operations.<br> Lead financial risk management activities.<br> Conduct policy and compliance audits.<br> Ensure external compliance.<br> Drive internal reviews and audits.<br> Strengthen control systems.</p> <p><strong>Internal reporting</strong><br> Oversee accounting operations and ensure accurate financial reporting.<br> Manage monthly and quarterly close processes.<br> Monitor financial performance and provide analysis.<br> Ensure integrity of financial records.<br> Lead the development of annual budgets and multi-year plans.</p> <p><strong>Team leadership / development</strong><br> Lead, manage and develop a team of approximately 30 people.</p> <h4>Qualifications & experience</h4> <p>Bachelor’s degree required; a professional accounting certification is preferred.<br> Minimum 10 years of finance experience, ideally within the oil & gas or energy sector.<br> Leadership experience.<br> Experience working in remote site environments or large upstream projects is beneficial.<br> Strong communication skills with ability to influence non-financial stakeholders.</p></p><p></p>

<p>The Construction Manager is responsible for the complete administration and organization of construction and field personnel and directs the field effort through the activities of his staff. He reports directly to the Project Manager. Contributes to Construction Safety by reducing site exposure through modularization, standardization and maximizing off plot construction. Contributes in the development of brownfield construction strategies and planning initiatives for project opportunities pre FID. Focusses on addressing and removing hurdles to efficient construction and actively monitors productivity on site, advising (acting on behalf of) the construction manager of ways to improve the productivity metrics. Identifies and monitors brownfield construction planning initiatives for approved projects post FID. Will input into enhancing the design, contracting strategy and execution planning all in consideration of constructability through input into HSE, cost, schedule and quality. Acts as the Construction interface from the point of project inception to the point the project starts field execution. Ability to effectively work on more than one project at a time. Accountabilities/ Expectations : Coordinate with Project Engineer and EPCM Construction Management Team to bring a coordinated approach to the overall project scope, quality, cost and schedule expectations. Ensure that planning of the project deliverables from Engineering and Contracts &amp; Procurement is line with the construction sequence and further to the hand over sequence. Ensures designs make optimal use of cold work, modularization and off plots construction to minimize HSSE exposure on site.</p><p><strong>Desired Candidate Profile</strong></p><p>Skills are typically acquired through completion of an undergraduate degree in architecture, engineering, or business administration, preferred Engineering branches., i.e. Mechanical, Civil, electrical, chemical, or equivalent. 5 years of experience in project management which includes experience in facility construction or remodeling and management experience. Preferred Experience: Minimum 15 years experience in Oil and Gas related project Design and Engineering Minimum 10 years experience in Oil and Gas Project Delivery as a Umbrella Contract Construction Manager function in a discipline Workforce Experience in Productivity measurement resource based planning (Level 4 Scheduling) Strong Managerership and teambuilding skills Supervisory experience</p>

<p>Determine, review and establish the local and international policies, standards and specifications required for mechanical engineering work related to building construction and refurbishment, water supply stations and water wells, water supply networks for the project in Iraq. Carry out inspections of the water supply facilities to be constructed, assess the current situation of the mechanical systems, and design suitable upgrades/replacement of existing mechanical systems to meet the local and international standards and specifications applicable, and in consultation with all stakeholders. And or, propose, design the replacements and new installations. Prepare and/or review detailed mechanical engineering design documentation including drawings, specifications and scope of work reports to be included in water supply facilities construction tender documents. Prepare quality control and quality assurance documentation related to mechanical engineering work for new water supply facilities. and rehabilitation works. Assist the PM, Deputy PM, Water Supply Engineer and the QA/QC Engineer in the preparation of bidding documents for the new water supply facilities. Supervise on-site works carried out by contractors closely on a day to day basis to ensure quality of the works is monitored and controlled as per specification requirements. Prepare and submit progress reports to the Project Manager/Deputy PM at intervals agreed upon. Ensure safety and health of everyone involved in the project and general public by identifying risks and threats, planning, implementing and maintaining internationally acceptable safety standards in all aspects, at all stages of the project. Ensure all design and construction of water supply facilities and mechanical works is carried out in accordance with and in compliance with industry standards and international best practice energy efficiency principles, standards, guidelines and specification. Provide expert advice to all stakeholders including contractors, PM/Deputy PM, project staff , clients and donor agencies on Mechanical engineering related water supply facilities works where required. Preparing Mechanical drawing package including for new and or rehabilitation works. Preparing Mechanical SOW (scope of work) with technical specification including water wells, pump stations, water supply networks and related works, plumbing and fire protection systems. Designing and preparing a package of water supply and sanitation systems for small and medium scale projects. Using S-pipe and D-pipe or any other relevant and applicable software Create and review technical drawings, plans, and specifications using computer software and prepare design packages in line with client`s design planning manual and design reviewers instructions. Coordinate while required, with design reviewers and incorporate their comments if any. Perform detailed documentation to track project development and design process Ensure project timeline is met and project stays within budget Support the project team in the evaluation and endorsement of objectives and goals of contractor plans, including staffing and budgeting, milestone descriptions, risk management strategies, detailed schedules and scope descriptions, and work breakdown structures Check to assure all materials and /equipment have been tested, submitted and approved. Review all submittals to insure compliance with the plans and specification Inspect all material, equipment and mechanical tools delivered, at the time of receipt, to ensure compliance with submittals, and specifications. Resolve technical problems at site and the certification of construction work at site. Recommend design changes, cost reductions, warranty improvements, and manufacturing issues. Perform other duties as may be assigned. Establishment of procedures with time limits for inspection, sampling and testing of works and all other electrical requirements. Implementation and monitoring of quality assessments. Supervises the Quality Control functions/activities of a project or its parts, including Quality Control inspection schedules and the collection of Quality Records. Review all submittals to insure compliance with the plans and specifi cation Daily/Weekly/ Monthly report to the Project Manager on project progress activities. Project reporting Mechanical Engineer is to be reported to Project Manager (PM)</p><p><strong>Desired Candidate Profile</strong></p><p>Excellent oral and written communication skills. Strong interpersonal skills and ability to work as part of a team Very Good Knowledge in written and oral English and Arabic languages is required. Experience in the usage of computers and software packages (Autodesk AutoCAD, Microsoft office and mechanical design software).</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Site E&amp;I Construction lead-(Oil, Gas &amp; Water)<br><br><p><b>Job Description</b>: Construction E&amp;I Lead</p><br><br><p>Company: KBR</p><br><br><p>Location: Iraq (28/28 Rotational Assignment)</p><br><br><p>Nationality: Any</p><br><br><br><p>The Lead Construction Engineer (E&amp;I) will drive construction readiness, optimize field execution strategies, and ensure effective coordination between engineering, procurement, construction, commissioning, and operations. This position requires a seasoned professional capable of leading multidisciplinary teams and consistently achieving project safety, cost, schedule, and quality objectives</p><br><br><br><p><b>Accountability/ Expectations</b></p><br><br><ul><li>Enhance construction safety performance by promoting modularization, standardized assemblies, pre‑fabricated E&amp;I modules, and off‑site construction to reduce field exposure.</li><li>Develop brownfield and greenfield construction strategies, including tie‑in planning, SIMOPS coordination, shutdown integration, and live‑plant execution methodologies.</li><li>Identify and resolve E&amp;I construction challenges such as cable routing conflicts, hazardous area compliance issues, and instrument accessibility constraints.</li><li>Monitor field productivity using discipline-specific KPIs (cable pulling rates, termination progress, loop completion curves, energization milestones).</li><li>Lead construction planning, ensuring detailed sequencing for electrical load transfer, instrument migration, and control system cutover activities.</li><li>Provide constructability input into electrical single-line diagrams, cable block diagrams, instrument indexes, control system architecture, and hazardous area layouts.</li><li>Ensure design decisions align with HSE, cost, schedule, and quality requirements, validating field feasibility and installation constraints.</li><li>Facilitate Constructability Reviews focused on cable routing, instrument maintainability, equipment lifting constraints, and hazardous area compliance.</li><li>Serve as the primary E&amp;I construction interface from project inception through field execution.</li><li>Collaborate with Construction Management to develop execution plans covering power distribution, loop testing, control system migration, and cable management.</li><li>Manage multiple concurrent E&amp;I work fronts, ensuring resource leveling and contractor performance oversight.</li><li>Ensure engineering and procurement deliverables (SLDs, ILDs, P&amp;IDs, I/O lists, datasheets, cable drums, switchgear, instrument panels) align with construction sequencing and commissioning priorities.</li><li>Prepare detailed E&amp;I work packages including cable schedules, termination sheets, loop diagrams, installation drawings, and material take-offs.</li><li>Review and update work package documentation, red-line markups, as-built records, and test documentation.</li><li>Ensure compliance with IEC/NEC standards, ATEX/IECEx requirements, grounding and bonding standards, and project-specific electrical safety rules.</li><li>Support commissioning teams in developing energization plans, loop testing protocols, instrument calibration procedures, and control system functional testing.</li><li>Ensure construction activities integrate seamlessly with commissioning, operations, and other discipline interfaces.</li><li>Advocate for cold-work strategies such as pre-terminated instrument cables, plug-and-play analyzer shelters, and pre-assembled marshalling cabinets.</li><li>Align construction execution with project scope, quality, cost, and schedule targets.</li><li>Ensure engineering and procurement deliverables meet construction and handover requirements.</li><li>Implement Work Face Planning to ensure crews receive fully validated work packages.</li><li>Support interfaces with operations, ensuring safe and efficient brownfield and greenfield execution.</li><li>Ensure final designs incorporate construction risk assessments and economic considerations.</li></ul><br><p><b>Education</b></p><br><br><p>BSc. in Instrumentation, Electrical Engineering, or a related discipline.</p><br><br><br><p><b>Experience Requirements</b></p><br><br><p>Minimum 10 + years experience in Oil &amp; Gas E&amp;I design, construction, and commissioning.</p><br><br><br><p>Strong understanding of:</p><br><br><ul><li>LV/MV electrical distribution</li><li>Instrumentation installation and calibration</li><li>Loop testing and commissioning workflows</li><li>Proficiency in productivity measurement and resource-based planning (Level 4 Scheduling).</li><li>Proven leadership and supervisory experience in managing E&amp;I construction teams and contractors.</li><li>Strong organizational skills with the ability to manage multiple work fronts and shifting priorities.</li><li>High attention to detail with a focus on quality, accuracy, and safe execution.</li></ul><br><br><br><br> </div>

<p>We are seeking an experienced and commercially aware MEP Pre-Sales, Estimation &amp; Procurement Engineer capable of independently managing tendering, estimation, pre-sales activities, and end-to-end procurement requirements for MEP projects.</p><p>The ideal candidate must combine strong technical MEP knowledge with solid estimation, sourcing, negotiation, procurement, and logistics experience, and be capable of maintaining continuity between what is priced during tender stage and what is ultimately procured and delivered during project execution.</p><p><b><br></b></p><p><b>Key Responsibilities</b></p><ul><li>Review tender documents, drawings, specifications, BOQs, and scopes of work to fully understand project requirements.</li><li>Prepare and review MEP quantity take-offs, cost estimates, pricing, technical proposals, and tender submissions.</li><li>Identify scope gaps, technical risks, exclusions, assumptions, and potential cost impacts during the pre-sales stage.</li><li>Issue RFQs to suppliers and subcontractors, obtain competitive quotations, and prepare detailed technical and commercial comparisons.</li><li>Evaluate proposed materials, equipment, brands, and subcontractor offers for technical compliance, commercial competitiveness, availability, and lead time.</li><li>Develop and maintain a reliable network of MEP suppliers, manufacturers, subcontractors, and service providers.</li><li>Negotiate pricing, payment terms, delivery schedules, commercial conditions, and supplier commitments.</li><li>Support value engineering and identify technically compliant alternatives that improve project cost, lead time, or execution efficiency.</li><li>Maintain continuity between tender pricing and post-award procurement to ensure that approved project budgets, specifications, and commercial assumptions are preserved.</li><li>Manage procurement activities after project award, including supplier selection, purchase orders, material submittals, approvals, manufacturing follow-up, expediting, and delivery schedules.</li><li>Handle and coordinate international procurement, shipping arrangements, import documentation, customs clearance requirements, and final delivery to site.</li><li>Monitor long-lead and critical MEP items and ensure procurement activities remain aligned with the project programme.</li><li>Coordinate closely with project managers, engineers, consultants, suppliers, subcontractors, and site teams regarding technical and procurement requirements.</li><li>Maintain accurate procurement records, supplier comparisons, purchase commitments, delivery status, and project cost information.</li><li>Take ownership of procurement-related issues and proactively resolve technical, commercial, logistical, and delivery challenges.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor s Degree in Mechanical Engineering or Electrical Engineering.</li><li>Strong multidisciplinary knowledge of MEP systems and the ability to review mechanical, electrical, plumbing, firefighting, ELV, and related project requirements.</li><li>Proven experience in MEP pre-sales, tendering, estimation, and procurement.</li><li>Strong capability in reviewing drawings, specifications, BOQs, and technical documentation and translating them into accurate pricing and procurement requirements.</li><li>Demonstrated experience in supplier sourcing, RFQs, technical and commercial evaluations, negotiation, and subcontractor procurement.</li><li>Proven hands-on experience in end-to-end procurement, including purchase orders, international shipping, import documentation, customs clearance coordination, expediting, and delivery to site.</li><li>Strong commercial awareness and ability to evaluate pricing, payment terms, lead times, alternatives, and procurement risks.</li><li>Ability to independently manage both pre-award tendering activities and post-award procurement requirements.</li><li>Strong negotiation, coordination, organizational, problem-solving, and follow-up skills.</li><li>Ability to work under tender deadlines while simultaneously managing active project procurement requirements.</li><li>Previous site / project execution experience will be considered an advantage.</li><li>Previous experience within an MEP contractor, EPC contractor, or construction company will be highly preferred.</li></ul>

<p>Under general autonomy and wide scope: The Well Engineering Manager functions as a technical Subject Matter Expert (SME), typically at the Country level staying abreast of current industry and PSL technological developments.</p><p>This position is accountable for the implementation of Engineering processes with respect to quality and integrity assurance. Reviews and maintains HMS processes to ensure the management system remains up-to-date with industry best practices. Responsible for approval of Well Designs and/or Programs and ensures these are in compliance with contracts, as well as, the Company's HMS policies &amp; procedures. Ensures all Operational Activities are adequately evaluated and a full Risk Matrix table with Mitigation plans is completed. Responsible for resolving critical engineering/operational issues, identifying chronic problems and proposing solutions, ensuring optimum technical solutions for field project development, and compliance with all Project/Contract metrics. Coordinates engineering programs/procedures and practices among different Projects and/or Rigs. Supports development of new technology and champions the application and deployment of the same. Leads technical presentations to client. Provides work direction and mentorship on a regular basis to Engineers. Responsible for the training &amp; development of Well Engineers and their competency development. Operates with significant level of technical and/or operational independence in all assigned areas.</p><h4>Additional Role Responsibilities:</h4><ul><li>Ability and flexibility to travel to Iraq both domestically and internationally typically 28/28 days per business required.</li><li>Provides Managership and guidance to both planning and operational teams.</li><li>Demonstrates support of the management system</li><li>Manages all well planning, design and engineering activities associated with drilling, completions and abandonment operations.</li><li>Ensures the team properly consider design options, assess risks and validate costs and work closely with other Wells/technical teams, legislative bodes and service providers at various stages of the well planning process to ensure viability of proposals.</li><li>Manages well operations to effectively control the risk, technical execution, cost control and ensures compliance with policies and procedures.</li><li>Manages operational deviations from Company policy with suitable adherence to the risk assessment process.</li><li>Manages platform rig engineering in the planning and execution of rig maintenance, rig modifications, recertification and upgrades.</li><li>Ensures peer reviews, risk assessments, engineering/planning reviews, etc. are undertaken.</li><li>Sets performance targets and implements performance measurement and improvement processes.</li><li>Ensures that the lessons learned system is utilized to record lessons and used to transfer lessons into detail well planning to complete the full learning cycle.</li></ul><p>Requires an undergraduate degree in STEM, preferably in Petroleum or Mechanical Engineering, and 12+ years experience as a Well Engineer with knowledge of drilling, completions, intervention operations and techniques. Demonstrated experience in leading or supervising an engineering team. Must have a Well Control certificate.</p><p>Preferred Experience: Minimum of 15-years relevant experience in their discipline or in an operations environment within the oil &amp; gas industry.</p><p><strong>Desired Candidate Profile</strong></p><p>Requires an undergraduate degree in STEM, preferably in Petroleum or Mechanical Engineering, and 12+ years experience as a Well Engineer with knowledge of drilling, completions, intervention operations and techniques. Demonstrated experience in leading or supervising an engineering team. Must have a Well Control certificate.</p><p>Preferred Experience: Minimum of 15-years relevant experience in their discipline or in an operations environment within the oil &amp; gas industry.</p>