Equipment operator Jobs

<p>To install, assemble, align, and complete Gas Turbines, Steam Turbines, generators, and auxiliary mechanical equipment safely and accurately. To ensure all installation and alignment work meets OEM specifications, project quality standards, and HSE requirements. To support mechanical completion, inspection, commissioning, and punch-list clearance activities.</p><p>Install and assemble Gas Turbines, Steam Turbines, generators, and auxiliary equipment. Perform precision alignment of rotating equipment using laser alignment and conventional methods. Install bearings, couplings, seals, diaphragms, casings, valves, and piping connections. Carry out dimensional checks, equipment elevation, centerline, and tolerance verification as per OEM requirements. Assist with turbine casing assembly, rotor installation, rotor coupling, and turning gear installation. Perform flange assembly and controlled bolting/hydraulic torqueing. Conduct inspection, flushing, preservation, and mechanical completion activities. Support commissioning and mechanical run-test activities when required. Participate in punch-list clearance and quality inspections. Maintain installation records, inspection reports, and quality documentation. Follow all HSE requirements, work permits, safety procedures, and site instructions. Coordinate effectively with mechanical, electrical, commissioning, QA/QC, and other site teams.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Minimum 5 years of experience in rotating equipment installation.</li><li>Experience in power plant construction projects.</li><li>Knowledge of Gas Turbine, Steam Turbine, Generator, and auxiliary equipment installation.</li><li>Ability to read and interpret mechanical and assembly drawings.</li><li>Knowledge of turbine alignment, rotor installation, and flange assembly.</li><li>Familiarity with Dial Indicators, Micrometers, Feeler Gauges, Precision Levels, and Laser Alignment Systems.</li><li>Knowledge of hydraulic torqueing and mechanical assembly practices.</li><li>Ability to understand and follow OEM installation drawings and manuals.</li><li>Good English communication and reading ability.</li></ul>

<p>Job Specification • Supervise assigned crew during duties, emergency response activities, drills, and standby operations. • Operate and supervise the operation of ARFF vehicles, firefighting systems, rescue equipment, communication systems, and associated operational resources. • Respond to aircraft emergencies, structural fires, fuel incidents, medical emergencies, hazardous material incidents, and other airport emergencies as directed. • Participate and supervise tactical firefighting, rescue, casualty handling, evacuation, and hazard control activities during emergency operations. • Conduct routine inspections of firefighting vehicles, rescue tools, communication systems, PPE, extinguishing agents, and station equipment to maintain operational readiness. • Assist in the implementation of station drills, practical exercises, operational familiarization activities, and recurrent training programmes. • Maintain operational records, inspection checklists, equipment logs, occurrence reports, and assigned documentation related to shift activities. • Monitor operational safety practices, PPE compliance, housekeeping standards, and readiness conditions within assigned operational areas. • Ensure implementation of departmental SOPs, Airport Emergency Plan procedures, and operational instructions during routine and emergency activities. • Direct the assigned crew activities and maintain effective communication with supervisors and operational personnel during emergency response operations. Human and Technical Resources • Supervise operational activities of assigned firefighters and drivers/operators during routine duties and emergency operations. • Verify operational readiness and serviceability of assigned vehicles, firefighting equipment, rescue tools, PPE, and communication systems. • Report equipment defects, operational deficiencies, and maintenance requirements affecting emergency response capability. • Assist in practical familiarization and on-the-job guidance of personnel deployed under. • Ensure operational resources assigned to the crew are maintained in a clean, serviceable, and operationally ready condition. Planning and Programmes • Conduct shift level drills, operational exercises, practical training sessions, and familiarization programmes. • Participate in operational preparedness activities, inspection schedules, and emergency readiness programmes. • Assist in organizing crew activities during shifts to maintain continuous operational response capability. • Participate in post-drill debriefings, operational reviews, and continuous improvement activities. • Ensure completion of all competency development activities as per stipulated timeframe. Core Operational Activities • Respond promptly to all emergency calls and participate in the deployment of ARFF resources during emergency operations. • Operate and supervise the operation of crash fire tenders, firefighting appliances, rescue tools, and associated emergency equipment in accordance with approved procedures. • Participate in firefighting, rescue, casualty management, hazard control, and evacuation operations during emergency incidents. • Maintain communication discipline and comply with approved RT communication procedures and phraseology during operational activities. • Conduct operational inspections, equipment checks, foam level checks, and routine readiness inspections during assigned duties. • Assist in maintaining station discipline, operational housekeeping, and readiness standards throughout the operational shift. Human Resources Management • Effective supervision of assigned crew personnel during operational and training activities. • Promote teamwork, discipline, safe working practices, and professional conduct among operational personnel. • Assist in training, mentoring, and practical familiarization of firefighters and newly assigned personnel. • Encourage reporting of hazards, unsafe conditions, equipment defects, and operational concerns. • Maintain effective coordination and communication with supervisory personnel during operational activities. Budget and Activity Planning • Supports efficient utilization and care of operational vehicles, firefighting media, PPE, rescue tools, and station resources. • Monitor operational usage of firefighting agents, consumables, and equipment and report deficiencies or replenishment requirements. • Ensure inventory accountability and operational care of equipment assigned to the crew. • Carry out assigned activities efficiently while maintaining operational readiness standards. Quality and Environmental Management (QMS / EMS) • Follow approved operational procedures, inspection standards, and departmental requirements during firefighting, rescue, and routine operational activities. • Participate in operational inspections, equipment checks, and readiness verification activities assigned during shift duties. • Maintain responsible handling practices related to firefighting foam, fuel, hazardous materials, and operational waste within assigned work areas. Safety Management System (SMS) • Assist in the implementation of Safety Management System (SMS) requirements during operational and emergency response activities. • Identify and report operational hazards, unsafe conditions, equipment defects, and safety concerns through approved reporting procedures. • Follow approved operational safety practices, PPE requirements, and safe system of work during all duties. • Participate in operational investigations, safety briefings, and corrective action implementation activities where assigned. • Promote safety awareness and responsible operational conduct during routine and emergency duties.</p><p>Education Bachelor’s degree or equivalent qualification (Essential). Experience • Minimum 6 years of progressive experience in Aircraft Rescue and Firefighting operations. • Experience in Aerodrome Category 8 or above airport operations preferred. • Additional consideration may be given to candidates possessing operational experience on NAFFCO CFTs. Computer Skills Working knowledge of MS Office Language Skills English: Proficient written and spoken communication skills (Essential). Arabic: Desirable Training Requirements • Basic ARFF training certificate from a recognised aviation firefighting training institution • Heavy vehicle driving license and driving & operation of crash fire tenders Physical Standards • Physically and medically fit to perform operational firefighting and rescue duties. • Ability to perform operational duties involving firefighting PPE, breathing apparatus, rescue operations, and emergency response activities.</p>

<p>The Avionics Technician performs aircraft maintenance to include inspection, operational test, repair, modification and replacement of aircraft electrical / avionics systems and components. Applies technical knowledge and skills to troubleshoot electrical / avionics discrepancies.</p> <div> <div> <div> <div> <div> <div> <div> <div> <div> <p> </p> <p> <b>Essential Responsibilities:</b> </p> <ul> <li> <p>Possess in-depth knowledge of applicable maintenance/technical manuals and publications, and special tools and test equipment. Must be familiar with operational capabilities and limitations of electrical/avionics systems</p> </li> <li> <p>Possess a high degree of expertise of aircraft electrical/avionics systems</p> </li> <li> <p>Performs the inspection, testing, troubleshooting, repair, modification and rewiring as required of complex avionics/electrical systems and subsystems discrepancies and modifications</p> </li> <li> <p>Use schematic diagrams, blueprint drawings, maintenance manuals and factory publications to operate, modify, test and repair aircraft electrical / avionics systems.</p> </li> <li> <p>Utilize test equipment to include but not limited to digital volt / amp meter, transponder ramp tester, fuel quantity tester, ITT calibration test set, and other test equipment required in the troubleshooting, modification, and repair of avionics / electrical systems.</p> </li> <li> <p>Order parts and materials.</p> </li> <li> <p>Obtain and maintain qualification as a Plane Captain and any associated licenses/qualifications necessary to perform the duties of an OMAT2. </p> </li> <li> <p>Operate ground support equipment.</p> </li> <li> <p>Identify and treat avionics/ electrical corrosion.</p> </li> <li> <p>Perform aircraft jacking and hoisting as required.</p> </li> <li> <p>Perform certification and re-certification of altimeter systems.</p> </li> <li> <p>Perform calibration of directional guidance systems.</p> </li> <li> <p>Required to perform collateral duty inspections.</p> </li> <li> <p>Must obtain and keep current turn qualification.</p> </li> <li> <p>Maintain cleanliness of the work center.</p> </li> <li> <p>Comply with Foreign Object Damage (FOD), Egress Familiarization, and Hazardous Waste and Tool Control programs.</p> </li> <li> <p>Comply with all established general and industrial safety rules and regulations as applicable to the contract, facility, and job assignment.</p> </li> <li> <p>Assist as directed to ensure safety, security and preservation of government / company owned equipment.</p> </li> <li> <p>Present a courteous and professional demeanor when dealing with customers.</p> </li> <li> <p>Furnish and maintain own hand tools.</p> </li> <li> <p>Operate portable firefighting equipment.</p> </li> <li> <p>Operate aircraft ground servicing equipment including vehicles, tugs, tractors, servicing carts, aircraft jacks and hoists, test equipment, hand tools, power tools.</p> </li> <li> <p>Perform all other position related duties as assigned or requested.</p> </li> </ul> <p> </p> <p> <b>Minimum Qualifications:</b> </p> <ul> <li> <p>Satisfactory completion of U.S. Armed Forces aircraft avionics school or other schools with equivalent curriculum or three (3) years of on-the-job training and / or experience working with similar avionics systems and components is required.</p> </li> <li> <p>Graduation from high school or GED required.</p> </li> <li> <p>Must be able to meet any Government / Company licensing / qualification requirements for the position.</p> </li> <li> <p>Must have an FAA Airframe and Powerplant (A&amp;P) License.</p> </li> <li> <p>Must have three (3) years experience in T6 aircraft electrical / avionics maintenance including avionics corrosion detection, treatment and prevention, performing maintenance on avionics and/ or electrical systems, utilizing tools, blueprints, drawings, wiring diagrams, schematics and normal safety requirement.</p> </li> <li> <p>Demonstrate a basic knowledge of aircraft systems and nomenclature. </p> </li> <li> <p>Possess working knowledge and skill in the use of basic tools and test equipment.</p> </li> <li> <p>Must be familiar with the operational capabilities and limitations of electrical / avionics systems.</p> </li> <li> <p>Possess a working knowledge of the detection, prevention, and treatment of corrosion.</p> </li> <li> <p>Must be able to read, write, understand, and communicate the English language and follow verbal and written instruction.</p> </li> <li> <p>Must obtain and keep current turn qualification.</p> </li> </ul> </div></div></div></div></div></div></div></div></div>

<p><h4>Essential responsibilities:</h4> <p>The avionics technician performs aircraft maintenance to include inspection, operational test, repair, modification and replacement of aircraft electrical/avionics systems and components. Applies technical knowledge and skills to troubleshoot electrical/avionics discrepancies.</p> <ul> <li>Possess in-depth knowledge of applicable maintenance/technical manuals and publications, and special tools and test equipment. Must be familiar with operational capabilities and limitations of electrical/avionics systems.</li> <li>Possess a high degree of expertise of aircraft electrical/avionics systems.</li> <li>Performs the inspection, testing, troubleshooting, repair, modification and rewiring as required of complex avionics/electrical systems and subsystems discrepancies and modifications.</li> <li>Use schematic diagrams, blueprint drawings, maintenance manuals and factory publications to operate, modify, test and repair aircraft electrical/avionics systems.</li> <li>Utilize test equipment to include but not limited to digital volt/amp meter, transponder ramp tester, fuel quantity tester, ITT calibration test set, and other test equipment required in the troubleshooting, modification, and repair of avionics/electrical systems.</li> <li>Order parts and materials.</li> <li>Obtain and maintain qualification as a plane captain and any associated licenses/qualifications necessary to perform the duties of an OMAT2.</li> <li>Operate ground support equipment.</li> <li>Identify and treat avionics/electrical corrosion.</li> <li>Perform aircraft jacking and hoisting as required.</li> <li>Perform certification and re-certification of altimeter systems.</li> <li>Perform calibration of directional guidance systems.</li> <li>Required to perform collateral duty inspections.</li> <li>Must obtain and keep current turn qualification.</li> <li>Maintain cleanliness of the work center.</li> <li>Comply with foreign object damage (FOD), egress familiarization, and hazardous waste and tool control programs.</li> <li>Comply with all established general and industrial safety rules and regulations as applicable to the contract, facility, and job assignment.</li> <li>Assist as directed to ensure safety, security and preservation of government/company owned equipment.</li> <li>Present a courteous and professional demeanor when dealing with customers.</li> <li>Furnish and maintain own hand tools.</li> <li>Operate portable firefighting equipment.</li> <li>Operate aircraft ground servicing equipment including vehicles, tugs, tractors, servicing carts, aircraft jacks and hoists, test equipment, hand tools, power tools.</li> <li>Perform all other position related duties as assigned or requested.</li> </ul> <h4>Minimum qualifications:</h4> <ul> <li>Satisfactory completion of U.S. Armed Forces aircraft avionics school or other schools with equivalent curriculum or three (3) years of on-the-job training and/or experience working with similar avionics systems and components is required.</li> <li>Graduation from high school or GED required.</li> <li>Must be able to meet any government/company licensing/qualification requirements for the position.</li> <li>Must have an FAA Airframe and Powerplant (A&P) license.</li> <li>Must have three (3) years’ experience in T6 aircraft electrical/avionics maintenance including avionics corrosion detection, treatment and prevention, performing maintenance on avionics and/or electrical systems, utilizing tools, blueprints, drawings, wiring diagrams, schematics and normal safety requirements.</li> <li>Demonstrate a basic knowledge of aircraft systems and nomenclature.</li> <li>Possess working knowledge and skill in the use of basic tools and test equipment.</li> <li>Must be familiar with the operational capabilities and limitations of electrical/avionics systems.</li> <li>Possess a working knowledge of the detection, prevention, and treatment of corrosion.</li> <li>Must be able to read, write, understand, and communicate the English language and follow verbal and written instruction.</li> <li>Must obtain and keep current turn qualification.</li> </ul></p><p></p>

<p>ey Responsibilities</p><p>1- Production Management</p><ul><li><p>Prepare daily, weekly, and monthly production plans in coordination with Sales and Warehouse departments.</p></li><li><p>Manage production orders across injection molding and IML production lines.</p></li><li><p>Monitor actual production results against targets and analyze performance gaps.</p></li><li><p>Ensure the availability of raw materials, labels, molds, packaging materials, and required manpower.</p></li><li><p>Supervise machine setup, mold changes, robot settings, color changes, and product changeovers.</p></li><li><p>Monitor production output, cycle time, rejection rate, waste, and downtime.</p></li><li><p>Ensure that finished products comply with approved specifications and samples.</p></li><li><p>Improve machine and workforce productivity and reduce mold-change time.</p></li><li><p>Coordinate with Quality Control to address non-conforming products and prevent recurrence.</p></li><li><p>Prepare and submit daily, weekly, and monthly operational reports.</p></li></ul><p>2- Maintenance Management</p><ul><li><p>Develop and implement preventive, periodic, and predictive maintenance plans.</p></li><li><p>Supervise the maintenance of injection molding machines, IML robots, molds, compressors, chillers, and auxiliary equipment.</p></li><li><p>Ensure quick diagnosis and repair of emergency breakdowns.</p></li><li><p>Conduct root-cause analysis for recurring failures and implement corrective actions.</p></li><li><p>Monitor equipment downtime and maintenance performance indicators.</p></li><li><p>Maintain complete maintenance records for each machine, mold, and piece of equipment.</p></li><li><p>Identify critical spare parts and ensure appropriate inventory levels.</p></li><li><p>Coordinate with suppliers, service providers, and external technicians when required.</p></li><li><p>Inspect completed maintenance work and confirm that equipment is safe and ready for operation.</p></li></ul><p>3- Operational Improvement</p><ul><li><p>Improve the plant’s Overall Equipment Effectiveness (OEE).</p></li><li><p>Reduce raw-material waste and the consumption of electricity, compressed air, and cooling water.</p></li><li><p>Analyze rejected products and production losses and implement improvement plans.</p></li><li><p>Develop and update Standard Operating Procedures (SOPs) and work instructions.</p></li><li><p>Lead continuous-improvement and production-capacity projects.</p></li><li><p>Participate in the evaluation and procurement of new machinery, molds, and equipment.</p></li><li><p>Prepare production and maintenance budgets and control operational costs.</p></li><li><p>Ensure the proper use and protection of company assets and equipment.</p></li></ul><p>4- Team Management</p><ul><li><p>Lead production and maintenance engineers, supervisors, technicians, operators, and workers.</p></li><li><p>Prepare shift schedules and assign duties according to operational requirements.</p></li><li><p>Evaluate employee performance and identify training requirements.</p></li><li><p>Train employees on proper operation, troubleshooting, quality, and safety procedures.</p></li><li><p>Ensure compliance with attendance, discipline, and company policies.</p></li><li><p>Promote effective coordination between Production, Maintenance, Quality, and Warehouse teams.</p></li></ul><p>5- Quality and Safety</p><ul><li><p>Ensure compliance with quality, hygiene, and housekeeping requirements for IML products.</p></li><li><p>Prevent the use of unapproved materials, labels, molds, or production parameters.</p></li><li><p>Ensure first-piece inspection is completed after startup, mold changes, or material changes.</p></li><li><p>Enforce occupational health and safety procedures and the use of personal protective equipment.</p></li><li><p>Ensure Lockout/Tagout (LOTO) procedures are followed during maintenance activities.</p></li><li><p>Investigate incidents and operational risks and implement preventive measures.</p></li><li><p>Maintain clean, safe, and organized production and maintenance areas.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><p>At least seven years of experience in industrial operations or production, including three years in a supervisory or managerial position.</p><ul><li><p>Experience in plastic</p></li></ul>

<p><h4>Duties</h4> <p>Responsible for maintaining a safe workplace and ensuring that safety is the highest priority in the workplace.<br> Comply with all Environmental Health & Safety and Quality Assurance requirements and goals.<br> Provide information and materials to these divisions as necessary to ensure adequate and legal documentation.<br> Ensures data accuracy and update of equipment inventory database.<br> Ensure that related data related to activities meet the requirements.<br> Process excess documentation for all controlled and non-controlled excess equipment and materials.<br> Review, reconcile, adjust and process all inventory transactions.<br> Process and coordinate equipment transfers.<br> Assist in a broad scope of direct and indirect support activities involving customer owned equipment as necessary to complete assigned tasks.<br> Conduct daily inspections of assigned equipment and immediately report defects or maintenance requirements.<br> Assist with scrap metal processing and preparation for disposal or recycling.<br> Assist in contingency waste removal operations during emergencies, special events, or increased operational requirements.<br> Perform additional duties and projects assigned.</p> <h4>Required</h4> <p>Minimum acceptable experience level: minimum 4 or more years’ experience handling waste management and disposal activity.<br> Previous experience in waste management, sanitation, logistics, construction support, or material handling preferred.<br> Ability to operate or learn disposal collection equipment and material handling equipment.<br> Ability to communicate effectively with supervisors and team members.</p> <h4>Knowledge, Skills, and Abilities</h4> <ul> <li>Prior proven experience in property disposal operations with Defense Reutilization.</li> <li>Experience operating heavy equipment to include up to a 30K forklift, extended reach forklift, material handler, grappler (excavator), front end loader and material shredders.</li> <li>Experience with cutting torches to include plasma cutters.</li> <li>Commitment to maintaining a high-performance team which delivers customer service excellence.</li> <li>Knowledge of principles and processes involved in supporting contract responsibilities at an overseas facility.</li> <li>Ability to work in a fast-paced environment requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules.</li> <li>Cross-cultural sensitivity with an international perspective.</li> <li>Excellent organizational and time management skills.</li> <li>Computer skills, specifically in Microsoft Word and Excel.</li> <li>Ability to become an active and functioning member of a team.</li> <li>Ability to be innovative and be an agent for change.</li> <li>Ability to prioritize multiple tasks in a fast-paced operational environment.</li> <li>Basic recordkeeping and reporting skills.</li> </ul> <h4>Physical Requirements</h4> <ul> <li>Frequently lift and carry materials weighing up to 25 kg.</li> <li>Stand, walk, bend, climb, kneel, and work for extended periods.</li> <li>Operate manual and powered equipment safely.</li> <li>Work in dusty, noisy, and outdoor environments.</li> <li>Wear required PPE, including safety boots, gloves, eye protection, hearing protection, and reflective clothing.</li> </ul> <h4>Working Conditions</h4> <ul> <li>Outdoor and industrial work environment.</li> <li>Exposure to heat, dust, noise, and moving equipment.</li> <li>May be required to work overtime, weekends, holidays, or emergency callouts to support mission requirements.</li> </ul> <h4>Performance Expectations</h4> <ul> <li>Complete disposal operations safely, efficiently, and on schedule.</li> <li>Maintain high standards of cleanliness throughout assigned work areas.</li> <li>Ensure waste is properly segregated and disposed of in accordance with environmental requirements.</li> <li>Demonstrate reliability, professionalism, accountability, and teamwork while supporting mission operations.</li> </ul> <h4>Education</h4> <p>A high school diploma or GED (General Education Diploma). Certifications or 4 years’ substitute experience in waste management and disposal services will be acceptable.<br> Valid Iraqi driver’s license (if operating company vehicles).</p> <h4>Security Vetting</h4> <p>Already possess a RSO issued security clearance or be able to obtain a favorable RSO issued clearance prior to being hired is required for the position. Must maintain eligibility at the required certification or clearance level for the duration of the contract.</p> <h4>Language Skills</h4> <p>Satisfactory English and Arabic proficiency to meet job requirements and to adhere and comply with safety, health, and security measures.</p> <h4>Medical</h4> <p>Successfully complete and pass the medical and drug examinations as required by Amentum and our customer for deployment to Iraq. Must maintain physical and drug requirements for duration of deployment.</p> <h4>Desired</h4> <ul> <li>Previous out of home country experience and previous work experience in harsh environmental conditions are a plus.</li> <li>Experience supporting Department of State.</li> <li>Experience working with Amentum.</li> </ul> <h4>Other Knowledge, Skills and Abilities</h4> <ul> <li>Knowledge of the principles and processes involved in Quality Control Management.</li> <li>Successful management of multiple sites in geographically dispersed locations.</li> <li>Ability to collect, analyze and summarize data and to prepare clear and concise reports.</li> <li>Experience in effectively dealing with international and headquarters staff, and sensitivity to other cultures.</li> <li>Exercise sound judgment and make decisions independently.</li> <li>Excellent organizational and time management skills, with the ability to handle multiple tasks and administrative details in a fast paced and constantly changing environment.</li> <li>Expert communication skills to facilitate and disseminate information.</li> </ul> <h4>Working and Living Conditions</h4> <p>This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environment. Temperatures can reach 120-130 degrees Fahrenheit/50-55 degrees Celsius during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to Iraq for extended periods. Work schedules are a minimum of 6 days per week and 10 hours per day, while some jobs have higher daily and weekly minimums. Employees must be willing and able to perform physical activities including, but not limited to, heavy lifting and moving of items, parts, assemblies, and equipment up to the safety regulation maximum; climbing in and out of equipment; crawling; and working outdoors. This includes being able to lift and carry 40 pounds of personal protective equipment for extended periods of time and being capable of running and ‘duck & cover’ during emergencies without putting oneself or others at risk.</p></p><p></p>

<p>Riggers are highly specialized in moving jobs that cannot be accomplished by ordinary means and use equipment expressly designed for moving and lifting objects weighing hundreds of thousands or even millions of pounds or kilograms in places where ordinary material handling equipment cannot go. He/she performs assignments, as directed by the crew chief or field supervisor, involved in the installation of power plants, facilities, and new oilfield pumping units and maintenance/inspections of existing oilfield pumping units. You may be assigned other duties to help proactively drive our FieldCore vision and align with our organization s core values.</p><p><strong>Essential Duties &amp; Responsibilities:</strong></p><ul><li>Signal or verbally direct workers engaged in hoisting and moving loads, to ensure safety of workers and materials.</li><li>Test rigging to ensure safety and reliability.</li><li>Attach loads to rigging to provide support or prepare them for moving, using hand and power tools</li><li>Select gear such as slings, shackles, chokers and winches, per load weights and sizes, facilities, and work schedules.</li><li>Control movement of heavy equipment through narrow openings or confined spaces, using chain falls, gin poles, gallows frames, and other equipment.</li><li>Tilt, dip, and turn suspended loads to maneuver over, under, and/or around obstacles, using multi-point suspension techniques.</li><li>Manipulate rigging lines, hoists, and pulling gear to move or support materials such as heavy equipment.</li><li>Clean and dress machine surfaces and component parts.</li><li>Attach pulleys and blocks to fixed overhead structures such as beams, ceilings, and gin pole booms, using bolts and clamps</li><li>Dismantle and store rigging equipment after use.</li><li>Use proper rigging apparatus (i.e. chains, slings and ropes) and techniques to ensure safe and proper lifting is performed.</li><li>Work in adverse weather conditions including high and low temperatures and windy conditions</li><li>Ensure that safety is included in all aspects of each job he/she performs.</li><li>Use this position to influence operational personnel and visitors to do the same.</li><li>Demonstrate support / use of JSAs for every task and actively assist the work group when they are developed.</li><li>Attendance of all scheduled safety meetings and training.</li><li>Participate in regular scheduled audits of equipment and tools.</li><li>Identifying sub-standard acts and near misses.</li><li>Assist in all safety and environmental incident investigations to help determine root cause.</li><li>Ensure that he complies with the required STOP Observations and Near Miss Programs</li><li>Perform other duties as assigned</li><li>Travel extensively (internationally and domestically)</li><li>Ability and willingness to work holidays, weekends and overtime as required by field assignments</li></ul><p><strong>Desired Candidate Profile</strong></p><p><strong>Required Qualifications &amp; Experience :</strong></p><ul><li>Qualified level. Able to successfully perform all requirements of the job properly.</li><li>Possess advanced skills and applies the fundamental concepts, practices and procedures of a particular field of specialization.</li><li>Basic English language skills are required.</li><li>High School Diploma and related mechanical experience (carpentry, lifts, cranes, etc.)</li><li>Rigger / Auxiliary Moving &amp; Material Handling Equipment Certifications highly desired but not required</li></ul><p><strong>Desired Characteristics:</strong></p><ul><li>Experience of power generation (gas/steam turbines) and associated auxiliary equipment</li><li>Application of the Correct Rigging Tackle (ie Capable of Safely Lifting the Specified Loads)</li><li>Identification of Specific Shackles and Beam Clamps</li><li>Color Codes of Lifting Slings or Wires be they Belt Slings or Endless Bag Slings and or Wire Strops</li><li>Safety Mandatory Emergency Stop Signals</li><li>Able to Understand and act upon the Basic Safe Systems of Work and Method Statement showing any Approved Rigging Studies.</li><li>Overhead Crane Operation be it Pendant or Cab or Remotely Operated.</li><li>Working knowledge of Forklift, Tele Handler, Scissor Lift, Cherry Picker, Tractor (Tractor Cottil with lifting Arm), O/H Crane, etc.</li></ul>

<p><h4>Duties</h4> <p>Responsible for maintaining a safe workplace and ensuring that safety is the highest priority in the workplace.<br> Comply with all environmental health and safety and quality assurance requirements and goals.<br> Provide information and materials to these divisions as necessary to ensure adequate and legal documentation.<br> Ensure data accuracy and update of equipment inventory database.<br> Ensure that related data related to activities meet the requirements.<br> Process excess documentation for all controlled and non-controlled excess equipment and materials.<br> Review, reconcile, adjust, and process all inventory transactions.<br> Process and coordinate equipment transfers.<br> Assist in a broad scope of direct and indirect support activities involving customer owned equipment as necessary to complete assigned tasks.<br> Conduct daily inspections of assigned equipment and immediately report defects or maintenance requirements.<br> Assist with scrap metal processing and preparation for disposal or recycling.<br> Assist in contingency waste removal operations during emergencies, special events, or increased operational requirements.<br> Perform additional duties and projects assigned.</p> <h4>Required</h4> <p>Minimum acceptable experience level: minimum 4 or more years’ experience handling waste management and disposal activity.<br> Previous experience in waste management, sanitation, logistics, construction support, or material handling preferred.<br> Ability to operate or learn disposal collection equipment and material handling equipment.<br> Ability to communicate effectively with supervisors and team members.</p> <h4>Knowledge, Skills, and Abilities</h4> <ul> <li>Prior proven experience in property disposal operations with defense reutilization.</li> <li>Experience operating heavy equipment to include up to a 30K forklift, extended reach forklift, material handler, grappler (excavator), front end loader, and material shredders.</li> <li>Experience with cutting torches to include plasma cutters.</li> <li>Commitment to maintaining a high-performance team which delivers customer service excellence.</li> <li>Knowledge of principles and processes involved in supporting contract responsibilities at an overseas facility.</li> <li>Ability to work in a fast-paced environment requiring handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules.</li> <li>Cross-cultural sensitivity with an international perspective.</li> <li>Excellent organizational and time management skills.</li> <li>Computer skills, specifically in Microsoft Word and Excel.</li> <li>Ability to become an active and functioning member of a team.</li> <li>Ability to be innovative and be an agent for change.</li> <li>Ability to prioritize multiple tasks in a fast-paced operational environment.</li> <li>Basic recordkeeping and reporting skills.</li> </ul> <h4>Physical Requirements</h4> <ul> <li>Frequently lift and carry materials weighing up to 25 kg.</li> <li>Stand, walk, bend, climb, kneel, and work for extended periods.</li> <li>Operate manual and powered equipment safely.</li> <li>Work in dusty, noisy, and outdoor environments.</li> <li>Wear required PPE, including safety boots, gloves, eye protection, hearing protection, and reflective clothing.</li> </ul> <h4>Working Conditions</h4> <ul> <li>Outdoor and industrial work environment.</li> <li>Exposure to heat, dust, noise, and moving equipment.</li> <li>May be required to work overtime, weekends, holidays, or emergency callouts to support mission requirements.</li> </ul> <h4>Performance Expectations</h4> <ul> <li>Complete disposal operations safely, efficiently, and on schedule.</li> <li>Maintain high standards of cleanliness throughout assigned work areas.</li> <li>Ensure waste is properly segregated and disposed of in accordance with environmental requirements.</li> <li>Demonstrate reliability, professionalism, accountability, and teamwork while supporting mission operations.</li> </ul> <h4>Education</h4> <p>A high school diploma or GED (General Education Diploma). Certifications or 4 years’ substitute experience in waste management and disposal services will be acceptable.<br> Valid Iraqi driver’s license (if operating company vehicles).</p> <h4>Security Vetting</h4> <p>Already possess a RSO issued security clearance or be able to obtain a favorable RSO issued clearance prior to being hired is required for the position. Must maintain eligibility at the required certification or clearance level for the duration of the contract.</p> <h4>Language Skills</h4> <p>Satisfactory English and Arabic proficiency to meet job requirements and to adhere and comply with safety, health, and security measures.</p> <h4>Medical</h4> <p>Successfully complete and pass the medical and drug examinations as required by the company and our customer for deployment to Iraq. Must maintain physical and drug requirements for duration of deployment.</p> <h4>Desired</h4> <ul> <li>Previous out of home country experience and previous work experience in harsh environmental conditions are a plus.</li> <li>Experience supporting Department of State.</li> <li>Experience working with the company.</li> </ul> <h4>Other Knowledge, Skills, and Abilities</h4> <ul> <li>Knowledge of the principles and processes involved in quality control management.</li> <li>Successful management of multiple sites in geographically dispersed locations.</li> <li>Ability to collect, analyze, and summarize data and to prepare clear and concise reports.</li> <li>Experience in effectively dealing with international and headquarters staff, and sensitivity to other cultures.</li> <li>Exercise sound judgment and make decisions independently.</li> <li>Excellent organizational and time management skills, with the ability to handle multiple tasks and administrative details in a fast paced and constantly changing environment.</li> <li>Expert communication skills to facilitate and disseminate information.</li> </ul> <h4>Working and Living Conditions</h4> <p>This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environment. Temperatures can reach 120-130 degrees Fahrenheit/50-55 degrees Celsius during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to Iraq for extended periods. Work schedules are a minimum of 6 days per week and 10 hours per day, while some jobs have higher daily and weekly minimums. Employees must be willing and able to perform physical activities including, but not limited to, heavy lifting and moving of items, parts, assemblies, and equipment up to the safety regulation maximum; climbing in and out of equipment; crawling; and working outdoors. This includes being able to lift and carry 40 pounds of personal protective equipment for extended periods of time and being capable of running and ‘duck & cover’ during emergencies without putting oneself or others at risk.</p></p><p></p>

<p>A Lead Electrician is the one who does the maintenance, inspection, and repair, and installation of needed equipment and other electric-related things. They are the one who supervises and monitors the job of the Electrician, plans and takes action to every happening and problem that they can encounter. They also do the planning of schedule and the process of conducting an equipment check-up and maintenance.</p><p><strong>Desired Candidate Profile</strong></p><p>A Lead Electrician is the one who does the maintenance, inspection, and repair, and installation of needed equipment and other electric-related things. They are the one who supervises and monitors the job of the Electrician, plans and takes action to every happening and problem that they can encounter. They also do the planning of schedule and the process of conducting an equipment check-up and maintenance.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><div> <div> <div> <div> <div> <div> <div> <div> <div> <div> <div> <p><br></p> <p> <strong> </strong> <strong>Who You Are:</strong> </p> <p>Seeking a full-time professional in Iraq, supporting Navigational Aids (NAVAIDS) Maintenance &amp; Repair Support project. This position supports 24/7 aviation operations in a deployed environment and ensures safe, efficient, and compliant airfield operations while supporting mission-critical systems.</p> <p> <strong> NOTE: This position is contingent upon award of work.</strong> </p> <p> <strong>What You ll Do:</strong> </p> <ul> <li>Maintain, inspect, troubleshoot, repair, calibrate, and test radar systems supporting airfield and aviation operations.</li> <li>Perform preventive and corrective maintenance in accordance with FAA, ICAO, DoD, OEM, and contract requirements.</li> <li>Diagnose radar transmitter, receiver, antenna, display, power supply, and signal processing system faults.</li> <li>Conduct calibration, alignment, performance verification, and operational testing of radar systems.</li> <li>Monitor radar system performance and analyze equipment data to identify deficiencies and reliability concerns.</li> <li>Install, modify, upgrade, and commission radar equipment and associated infrastructure.</li> <li>Utilize oscilloscopes, spectrum analyzers, signal generators, and specialized test equipment for troubleshooting and fault isolation.</li> <li>Maintain maintenance records, inspection reports, configuration documentation, and technical logs.</li> <li>Coordinate maintenance activities with Airfield Management, ATC, Operations, and other stakeholders.</li> <li>Respond to radar outages and emergency service calls to restore mission-critical capabilities.</li> <li>Support system modernization initiatives and technical improvements.</li> <li>Support airfield operational readiness inspections and mission support activities.</li> </ul> <p> <strong>What You ll Bring:</strong> </p> <strong> </strong> <strong>Required Qualifications</strong> <ul> <li>Must be a US Citizen.</li> <li>Must have computer skills and be able to operate a variety of computer programs.</li> <li>Must be able to speak, read and write English fluently.</li> <li>Must maintain a valid driver's license from their home country with validity for 12 months from on-site employment date.</li> <li>Must maintain a valid passport from their home country with validity for 12 months from the wheels-up deployment date to the site. </li> <li>Must satisfy and maintain all medical screening requirements.</li> <li>Ability to perform essential job duties in a deployed environment.</li> </ul> Additional Required Qualifications <ul> <li>Minimum 5 years of radar systems maintenance and repair experience.</li> <li>Associate degree, military technical training, vocational training, or equivalent experience in Radar Systems, Electronics, Avionics, or related field.</li> <li>Technical training or certification in radar, avionics, electronics, or related discipline.</li> <li>Experience with radar transmitters, receivers, antennas, signal processors, displays, and associated support equipment.</li> <li>Ability to read and interpret technical manuals, schematics, wiring diagrams, and engineering drawings.</li> <li>Experience using oscilloscopes, spectrum analyzers, signal generators, multimeters, and electronic test equipment.</li> <li>Demonstrated troubleshooting, calibration, alignment, and fault isolation experience.</li> <li>Experience supporting aviation, military airfield, FAA, ICAO, or defense systems preferred.</li> <li>Strong technical problem-solving and analytical skills.</li> <li>Certified on the equipment/systems prior to being assigned work and performing maintenance and/or repair on defective equipment/systems.</li> <li>Ability to work rotating shifts, weekends, holidays, and emergency call-outs as required.</li> </ul> <p> </p> <p><br></p><div><div> </div> </div> </div> </div> </div> </div> </div> </div> </div> </div> </div> </div> </div></div></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><strong>Job Purpose:</strong></p><br><p>The commercial Team Leader (TL) supports and assists the Operations Manager, Baghdad in the day-to-day management of region-wide commercial operations and specified projects. The commercial TL has a major impact on how potential clients assess the capabilities of Control Risks and as such is responsible for setting and maintaining the highest standards of team presentation and capability. The commercial TL will be supporting an international client base that spans across oil and gas, humanitarian, infrastructure, diplomatic and financial services sectors amongst others.</p><br><p><strong>Role tasks and responsibilities:</strong></p><br><p><strong>Operational Responsibilities </strong></p><br><ul><li>Ensure that all HQ teams meet operational and training standards with assistance from the training team and that the team is fully compliant with Control Risks Standard Operating Procedures (SOPs). </li><li>Ensure the teams display client etiquette, discipline and Control Risks’ low-profile approach whilst maintaining a high standard of team presentation.</li><li>Responsible for the professional delivery of operational briefs to both Armed Protection Teams (APTs) and client staff when appropriate.</li><li>Understanding of Iraq’s geo-political landscape and Control Risks’ wider operations.</li><li>Assist in the conduct of risk assessments and operational planning.</li><li>Conduct venue and route surveys, security reviews and be able to produce bespoke reports.</li><li>Plan and execute tasks to remote areas and locations outside normal area of operations.</li><li>Provide cover to the project armed protection team contingent as and when required.</li></ul><p><strong>Management Responsibilities</strong></p><br><ul><li>To conduct certifiable instruction in all relevant operational and medical team requirements in accordance with current Control Risks training directives, both to HQ teams as well as client dedicated teams.</li><li>Responsible for deputizing in the absence of Ops Manager Baghdad and Baghdad Security Manager, assisting with the coordination of all operational activity within the region ensuring business continuity to the operations department.</li><li>Work closely with the operational management team to assist with the delivery of regional operational activities as required, including APT QA/QCs, by the organizational quality management system.</li><li>Work closely with the operational management team and regional departments to assists with all new commercial team mobilizations in support of operational requirements.</li><li>To ensure that the HQ and Baghdad based dedicated teams conducts effective administration to include vehicle maintenance, equipment husbandry / accountability and reports and return.</li><li>Assist and oversee with the management of temporary staff and all IN HR administration.</li><li>Responsible for the oversight and enforcements of HSE standards across HQ and Baghdad based dedicated teams.</li></ul><p>Applications will be closed tomorrow, 03 July 2026</p><br><p>Potential start date: mid July 2026</p><br><p>Rotation: 8 weeks on / 4 weeks off</p><br><p>Salary: To be discussed on the next stage of recruitment</p><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Machinist, Maintenance will fabricate parts and components for equipment or items on fabrication work order and to meet specified or original specification requirements in accordance with applicable equipment technical directives referenced in the Technical Library.</p><p>Principal Accountabilities</p><ul><li>Interpret written instructions and specifications.</li><li>Plan and lay out of work to be completed.</li><li>Use a variety of machinist's hand tools and precision measuring instruments.</li><li>Set up and operate standard machine tools.</li><li>Responsible for the shaping of metal parts to close tolerances.</li><li>Make standard shop computations relating to dimensions of work, tooling, feeds, and speeds of machining.</li><li>Perform other qualified duties as requested.</li></ul><p>Knowledge &amp; Skills</p><ul><li>Knowledge of the working properties of the common metals, selecting standard materials, parts, and equipment required for this work</li><li>Knowledge of fitting and assembling parts into mechanical equipment.</li><li>Requires a rounded training in machine-shop practice, usually acquired through a formal apprenticeship or equivalent training and experience.</li></ul><p>Physical Requirements/Working Environment</p><ul><li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li><li>Must be able to climb stairs, ramps, ladders, and work stands.</li><li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li><li>May be required to lift heavy objects whose weight may exceed 50 pounds.</li><li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li><li>Will handle dirty parts and lubricants.</li><li>Will be required to wear proper Personal Protective Equipment (PPE).</li><li>Must be able to pass a Respirator Physical and Fit Test qualification.</li><li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, fork lift, etc.</li><li>Must be able to lift/push/pull minimum of 50 pounds.</li><li>May work in normal office environment, maintenance shop or outside.</li><li>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</li><li>May be exposed to extreme noise from operating equipment.</li><li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li></ul><p>Benefits Overview:</p><ul><li>Health, dental, and vision insurance</li><li>Paid time off and holidays</li><li>Retirement benefits (including 401(k) matching)</li><li>Educational reimbursement</li><li>Parental leave</li><li>Employee stock purchase plan</li><li>Tax-saving options</li><li>Disability and life insurance</li><li>Pet insurance</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Minimum Requirements</p><ul><li>High school diploma or equivalent.</li><li>U.S. military technical school or specialized training course is desired, certification of education level.</li><li>Four (4) or more years machinist experience with repair, modification, maintenance and overhaul of equipment related to individual specialty codes within the past six (6) years.</li><li>Must be in possession of a Valid U.S. Passport valid for 2 years and 6 blank pages at the time of hiring and be able to travel internationally.</li><li>Must be able to obtain and maintain facility Public Trust NAC-I. "Note: US Citizenship is required for facility Public Trust NAC-I at this work location".</li><li>Must be able to clear CENTCOM MOD Physicals requirements for deployment training (Will be required to attend CRC (DIDC).</li><li>Must be able to obtain Iraq visa.</li></ul><p></p></section>

<p>Job Specification • Act as the primary liaison and first point of contact for ATC, RFF, Ground Handling Agents, Airlines, Engineering, and external stakeholders on all airside operational matters during the shift, escalating to the Head of Airside Operations where required. • Ensure strict enforcement of Airside Driving Regulations (ADR), Apron Discipline, and all active Airside Driving Permits (ADP) and Airside Vehicle Permits (AVP) throughout the shift; direct shift inspectors to act on violations and authorize the issuance of Non-Compliance Notices (NCN). • Coordinate and direct Wildlife Hazard Management activities during the shift, ensuring that wildlife observations are reported, logged, and acted upon in accordance with the Wildlife Hazard Management Plan, and that the runway and movement area remain safe for operations. • Oversee apron safety and operational discipline across all apron zones, including monitoring of ground handling activities, FOD prevention, fuel safety compliance, and resolution of apron. • Authorize and oversee emergency and contingency responses for airside-specific incidents during the shift — including runway/taxiway incursions, ground handling accidents, FOD alerts, fuel spills, airside vehicle accidents, and wildlife strikes — in accordance with the Airport Emergency Plan (AEP) and Airside Operations contingency procedures. • Complete, review, and submit comprehensive shift log reports capturing all significant events, incidents, operational decisions taken, and handover notes for each shift, ensuring accurate and auditable records for the Head of Airside Operations. • Conduct or delegate shift airside inspections of the movement area, apron, perimeter roads, and active worksites, ensuring compliance with ICAO Annex 14 standards, aerodrome certification requirements, and airport operational procedures. • Represent Airside Operations in real-time coordination calls, Airside Operations Room meetings, and pre/post-flight briefings during the shift as required. Human and Technical Resources • Direct and coordinate the full complement of Airside Operations shift staff across all sections for the duration of the shift, ensuring appropriate task allocation, coverage of all operational zones, and staff welfare. • Utilize the available management systems, stand planning tools, NOTAM databases, radio communication systems, and CCTV/surveillance platforms to maintain real-time situational awareness and operational control throughout the shift. • Ensure all shift operational vehicles and equipment are serviceable and deployed effectively; report unserviceable assets to the Head of Airside Operations and Engineering for immediate action. Planning and Programme • Review and brief all shift staff on the daily flight programme, scheduled airside works, active NOTAMs, planned closures, and any regulatory or safety advisories at shift commencement. • Contribute shift-level observations and operational data to the continuous improvement of Airside Operations procedures, SOPs, and contingency plans by providing structured feedback to the Head of Airside Operations. Core Operational Activities • Execute structured shift start and shift end handovers, ensuring all active permits, incidents, NOTAMs, ongoing works, and outstanding actions are clearly communicated and transferred to the incoming duty manager. • Authorize real-time operational decisions including temporary runway/taxiway restrictions, emergency equipment pre-positioning, and suspension of airside work activities when safety is at risk. • Coordinate the activation and stand-down of airside emergency responses for airside-specific incidents, ensuring all relevant parties (ATC, RFF, Ground Handlers, Engineering, airside operations team) are notified and deployed in accordance with the AEP. • Monitor and enforce FOD (Foreign Object Debris/Damage) prevention programmes across all apron and movement area zones, directing FOD inspections and ensuring immediate clearance of any identified debris. Human Resources Management • Provide direct line management, mentoring, and performance evaluation for all operational shift subordinates in alignment with the airport HR and competency framework. • Manage leave planning, duty rosters, and workforce scheduling to ensure continuous, uninterrupted operational coverage of all shift functions. • Identify training and career development opportunities for Operations Section staff and foster a safety-first, accountability-driven team culture.</p><p>Education • Bachelor's Degree, (Preferably in Aviation Management, Airport Operations, Aeronautical Science) Engineering, or a related discipline from a recognized institution. • A post-graduate qualification or diploma in Aviation/Airport Management is an added advantage) Experience • Minimum 6 years of progressive experience in airport airside operations, of which at least 2 years must be in a supervisory or senior Operational role with demonstrated shift management responsibility. • Proven experience in apron management, movement area operations, airside safety enforcement, and emergency/contingency coordination. • Experience across multiple Airside Operational functions is highly desirable. Computer Skills • Professional knowledge of Microsoft Suite (especially Word, PowerPoint and Excel) (Essential) • Demonstrated competency with various Airport Operations Management Systems (AODB, FIDS, stand planning tools), NOTAM databases, radio communication systems, and airside surveillance/CCTV platforms. Language Skills • English: solid written and spoken proficiency (Essential). English Language Proficiency - Minimum ICAO Level 4 or equivalent • Arabic: working proficiency (Desirable). Training Requirements • ICAO Annex 14 – Aerodromes (Essential). • ICAO Safety Management System (SMS) – ICAO-recognized institute (Essential). • Coordination of Emergency Response (Aerodrome Emergency Planning) (Essential). • Airside Driving Permit / Airside Driving Assessor certification (Highly Desirable). • Aerodrome Wildlife Hazard Management (Highly Desirable). • FOD Prevention Programme certification (Highly Desirable). • First Aid / Basic Life Support (Desirable).</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Under general supervision from the Production Manager, <br> The Production Supervisor works in a multi-discipline Asset Operations Team to develop potentially large and challenging unconventional plays and mature oil and gas fields. <br> Identifies innovative ways to apply HAL technology, service capability and expertise within the context of understanding the reservoir, production and facilities to design new, step-change field exploitation methodologies. <br> Integral member of the multi-discipline Production Team comprised of a reservoir engineer, production geologist and field personnel team. <br> Analyzes production history, well files, production equipment and decline curve analysis and nodal analysis of well performance to estimate remaining recoverable reserves, production and cost of upgrading equipment. <br> Selects and implements production technology, service capability and expertise including completion systems comprised of tubing selection, perforating, sand control and fine migration, matrix stimulation, water control and hydraulic fracturing; artificial lift equipment comprised of sucker-rod lift, gas lift, electrical submersible pumps, subsurface hydraulic pumps, progressing-cavity pumps and plunger lift; real-time surveillance and monitoring systems and waterflooding and other enhanced recovery techniques. <br> Uses decline curve analysis and nodal analysis to identify workovers or recompletions candidates and to select and upgrade production equipment. <br> Focuses on maintaining and increasing daily production through optimizing well performance and field operations while controlling operating costs. <br> Performs daily field operations including optimizing well behavior, production, water disposal, chemical injection and treatment, waterflood performance and artificial lift systems. <br> Evaluates proposed modifications to equipment or to operating procedures to improve safety, efficiency and reliability of equipment and ensures all modifications meet statutory and Company standards. <br> Develops and maintains good working relationships with Production Team through effective communication and teamwork.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Requires excellent communication skills and the ability to work closely with geologists, engineers, contractors and asset teams to successfully execute projects from concept to operation; over time, incumbent will become very knowledgeable of HAL technologies and solutions experience together with the exploitation methodologies and technologies that other companies apply. <br> Requires an undergraduate degree and a minimum of eight (8) years of industry experience. Degree in geology or engineering is preferred.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><div> <p><br></p> <p> <strong> </strong> <strong>Who You Are:</strong> </p> <p>Seeking a full-time Site Manager/NAVAIDS Manager in Iraq, supporting Navigational Aids (NAVAIDS) Maintenance &amp; Repair Support project. This position is tasked with performing management functions including the oversight and overall leadership and management of all NAVAIDS, radar, communications, and airfield lighting maintenance operations in a 24/7 deployed environment. Ensures safe, efficient, and compliant airfield operations while serving as the primary interface with the Prime Contractor and Government stakeholders. Join our team and grow with us as we provide best in-class services that help clients solve their most complex challenges.</p> <p><br></p> <p> <strong>What You ll Do:</strong> </p> <ul> <li>Oversight of the maintenance, repair, and support services, including managing the team of qualified personnel responsible for performing the maintenance, repair, and support activities.</li> <li>Developing and implementing maintenance schedules and procedures to ensure equipment/systems is maintained in an operational and safe condition.</li> <li>Conducting regular inspections of equipment/systems and maintaining an accurate inventory.</li> <li>When applicable, managing the maintenance and repair budget for equipment/systems, ensuring that all expenditures are within budget and justified.</li> <li>Developing and implementing a training program for maintenance personnel to ensure they are knowledgeable and proficient in the maintenance and repair of equipment/systems.</li> <li>Coordinating with other stakeholders, including Air Traffic Controllers and other maintenance personnel, to ensure that equipment/systems is operational and meets the needs of the Air Traffic Control (ATC) system(s).</li> <li>Keeping Vectrus informed of any equipment/systems issue(s) or concern(s) including maintenance and repair needs, budgetary issues, and any other issues that may impact the safe and efficient operation of the equipment/systems.</li> <li>Maintaining all necessary documentation and records related to the maintenance, repair, and support activities including maintenance logs, repair reports, and equipment inventories.</li> <li>Providing monthly reports to V2X on the status of the equipment, including any maintenance issues, repairs, or modifications that have been performed.</li> <li>Serving as Primary POC on all Quality Assurance related audits and providing objective evidence that all requirements in this SOW are being met upon request. </li> <li>Manages personnel and the performance of multiple functional areas. </li> <li>Provides expert direction and guidance to subordinates, develops schedules, formulates work plans, manages and controls project funds and resources, and serves as point of contact with the prime contractor representative; </li> <li>Manages a diverse staff of U.S. nationals, skilled and unskilled other country and local nationals. Maintains good order and morale among their staff members and their team in accordance with the guidance and direction by local base requirements, and in accordance with VGS Human Resource Policies and Procedures. Ensures that all employees adhere to and comply with the US Military general orders; </li> <li>Ensures that all corporate procedures are followed. Ensures that annual and other periodic performance reviews and carried out and properly documented. </li> <li>Oversight of the management controls to assure all on-site staff are carryout their duties with the highest degree of quality, accountability, and integrity and within the code of conduct required by VGS, and the U.S. military. </li> <li>Willingness to work shifts and extended hours in support of 24/7 operations; </li> <li>Performs other duties as required</li> </ul> <p> <strong> </strong> <strong>What You ll Bring:</strong> </p> <strong> </strong> <strong>Required Qualifications</strong> <ul> <li>Must be a US Citizen.</li> <li>Must have computer skills and be able to operate a variety of computer programs.</li> <li>Must be able to speak, read and write English fluently</li> <li>Must maintain a valid driver s license from their home country with validity for 12 months from on-site employment date.</li> <li>Must maintain a valid passport from their home country with validity for 12 months from the wheels-up deployment date to the site. </li> <li>Must satisfy and maintain all medical screening requirements </li> <li>Must be able to gain and maintain authorized entry onto US military installations.</li> <li>To perform this job successfully, an individual must be able to perform each essential job duty satisfactorily. Reasonable accommodation may be made to enable qualified individuals with disabilities to perform essential job functions.</li> </ul> <strong>Additional Required Qualifications</strong> <ul> <li>Minimum Acceptable Experience Level: twelve (12) years experience in aviation and DoD, including serving in a leadership role as either supervisor or manager for a minimum of eight (8) years.</li> <li>Ability to lift 70 lbs. </li> <li>Ability to work effectively with a multinational workforce. </li> <li>Experience in project development and implementation management, including planning, budgeting, scheduling, forecasting, developing and implementing staffing and equipment plans, and reporting; </li> <li>Knowledge in contract management including production of Scopes of Work, Budgets, Schedules, contract development, bidding-award, contract administration, and close outs; Knowledge of US military operations and contracting support in a contingency environment is desired; </li> <li>Sound civilian/military management background displaying ability to staff, organize, lead and manage a diverse work force larger than 10 people.</li> </ul> <p><br></p> </div></div></section>

<p><b>Job Description:</b></p><p>Welders fabricate and assemble metal structures and equipment through the use of welders, cutters, shapers and measuring tools.</p><p>Knowledge &amp; Qualification:</p><p>N/A</p><p><b>Role &amp; Responsibilities:</b></p><p>Welders fabricate and assemble metal structures and equipment through the use of welders, cutters, shapers and measuring tools. Welders produce metal products according to customer or employer specifications. ... Welders set up, operate and maintain welding equipment.</p><p><strong>Desired Candidate Profile</strong></p><p>KnowledgeAndQualifiction</p>

<p>The Instrumentation &amp; Controls Technician disassembles, inspects, cleans, repairs, calibrates, tests, and performs periodic maintenance of field instruments, equipment systems and controls. Evaluates and determines necessary modification, performs complex repairs or removal of instruments or devices needing overhaul during scheduled maintenance, troubleshooting while performing unscheduled work.</p><p><strong>Essential Duties &amp; Responsibilities:</strong></p><ul><li>Record and report abnormal function or out of tolerance conditions of equipment and initiate corrective action and documentation</li><li>Provide documents daily record of inspection, maintenance activity, repair and other work performed within approved guidelines and procedures.</li><li>Reinstall, test, evaluate, calibrate, and maintain instruments or devices upon completion of repairs.</li><li>Communicate with customer staff in the calibration, repair and operation of equipment as necessary.</li><li>Perform work in accordance with approved equipment, calibration, maintenance and safety procedures.</li><li>Ability and willingness to work holidays, weekends and overtime as required by field assignments</li><li>Travel extensively (internationally and domestically)</li><li>May be assigned other duties to help proactively drive our FieldCore vision and align with our organization s core values.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Two-year degree, scientific field of study preferred or equivalent related work experience</p><p>Must have appropriate license or certification where required by federal, state or local laws</p><p>English proficiency required</p><p><strong>Desired Characteristics:</strong></p><ul><li>Introductory level.</li><li>Possess good attitude, skills, and ambition</li><li>Basic skills training to ensure knowledge of fundamental concepts, practices and procedures of a particular field of specialization.</li><li>Experience in instrumentation, controls, installing, calibrating, maintaining and repairing equipment or equivalent experience.</li><li>Demonstrated use and understanding of physical standards of mass, temperature flow and pressure.</li><li>Working knowledge of computers.</li><li>Ability to read and work from blueprints, schematic diagrams and specification manuals.</li><li>Team player committed to working in a quality environment</li><li>Working knowledge of computers/PLC's</li><li>Excellent customer, communication, and interpersonal skills</li><li>Ability to work independently</li><li>Ability to complete multiple projects within time constraints</li><li>Strong organizational skills</li></ul>

<p>The Instrumentation &amp; Controls Technician, having completed level two competencies, disassembles, inspects, cleans, repairs, calibrates, tests, and performs periodic maintenance of field instruments, equipment systems and controls. Evaluates and determines necessary modification, performs complex repairs or removal of instruments or devices needing overhaul during scheduled maintenance, troubleshooting while performing unscheduled work.</p><p><strong>Essential Duties &amp; Responsibilities:</strong></p><ul><li>Record and report abnormal function or out of tolerance conditions of equipment and initiate corrective action and documentation</li><li>Provide documents daily record of inspection, maintenance activity, repair and other work performed within approved guidelines and procedures.</li><li>Reinstall, test, evaluate, calibrate, and maintain instruments or devices upon completion of repairs.</li><li>Communicate with customer staff in the calibration, repair and operation of equipment as necessary.</li><li>Perform work in accordance with approved equipment, calibration, maintenance and safety procedures.</li><li>Ability and willingness to work holidays, weekends and overtime as required by field assignments</li><li>Travel extensively (internationally and domestically)</li><li>May be assigned other duties to help proactively drive our FieldCore vision and align with our organization s core values.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Two-year degree, scientific field of study preferred or equivalent related work experience. Basic English language skills are required. 1-3 years of experience in instrumentation, controls, installing, calibrating, maintaining and repairing equipment or equivalent experience. Must have appropriate license or certification where required by federal, state or local laws English proficiency required</p><p><strong>Desired Characteristics:</strong></p><ul><li>Qualified level. Able to successfully perform all requirements of the job properly.</li><li>Possess advanced skills and applies the fundamental concepts, practices and procedures of a particular field of specialization.</li><li>Demonstrated use and understanding of physical standards of mass, temperature flow and pressure.</li><li>Working knowledge of computers.</li><li>Ability to read and work from blueprints, schematic diagrams and specification manuals.</li><li>Team player committed to working in a quality environment</li><li>Working knowledge of computers/PLC's</li><li>Excellent customer, communication, and interpersonal skills</li><li>Ability to work independently</li><li>Ability to complete multiple projects within time constraints</li><li>Strong organizational skills</li></ul>

<p>The Aircraft Mechanic II - Egress performs organizational, intermediate and limited depot level maintenance to include inspection, operational test, repair, modification and troubleshooting on all assigned aircraft, components and equipment.</p> <div> <div> <div> <div> <div> <div> <div> <div> <div> <p> </p> <p> <b>Essential Responsibilities:</b> </p> <ul> <li> <p>Remove/install canopies, ejection seats</p> </li> <li> <p>Perform periodic maintenance of all cockpit egress and life support systems of moderate difficulty, such as seats, canopies, CADs, heating/cooling systems</p> </li> <li> <p>Inspects and operates powered and nonpowered aerospace ground equipment.</p> </li> <li> <p>Reviews maintenance forms, aircraft records, automated maintenance data systems, and historical reports to ensure complete documentation. </p> </li> <li> <p>Maintain aircraft support equipment and orderly workspace.</p> </li> <li> <p>Interpret Maintenance Instruction Manuals, maintenance requirement cards, work from related schematics, diagrams, drawings, technical directives, maintenance/servicing instructions and operational written procedures and Company directives to perform maintenance.</p> </li> <li> <p>Install and remove cartridge actuated devices.</p> </li> <li> <p>Performs inspections and maintenance of aircraft air conditioning systems, fire warning/extinguishing systems. </p> </li> <li> <p>Identifies and treats corrosion.</p> </li> <li> <p>Operates, maintains, troubleshoots, removes and replaces associated parts and components on a variety of systems, such as aircraft, cabin environmental and pressurization systems, equipment cooling, liquid/gaseous and OBOGS oxygen systems.</p> </li> <li> <p>Perform related duties in hazardous areas such as oxygen system, engine fire extinguishing systems including the removal and replacement of cartridge-actuated devices.</p> </li> <li> <p>Maintains foreign object damage (FOD), hazardous waste, and tool control programs.</p> </li> <li> <p>Shall adhere to all applicable Amentum policies and procedures.</p> </li> <li> <p>Perform all other position related duties as assigned or requested.</p> </li> </ul> <p> </p> <p> <b>Minimum Qualifications:</b> </p> <ul> <li> <p>High School graduate or equivalent</p> </li> <li> <p>Must have completed Egress Course.</p> </li> <li> <p>Must have an FAA Airframe and Powerplant (A&amp;P) License.</p> </li> <li> <p>Shall have completed and be able to document the appropriate T/M required/ series preferred Navy Egress class</p> </li> <li> <p>Must have Five (5) years of applicable aircraft maintenance support experience.</p> </li> <li> <p>Three (3) or more years of T6 aircraft experience.</p> </li> <li> <p>Must have experience and thorough working knowledge in corrosion detection, treatment, and prevention.</p> </li> <li> <p>Shall be qualified according to their field of expertise and the level of maintenance assigned.</p> </li> <li> <p>Must be a U.S. citizen.</p> </li> <li> <p>Possess a high degree of expertise of aircraft systems</p> </li> <li> <p>Demonstrates in-depth knowledge of applicable maintenance/technical manuals, publications, instructions and special tools and test equipment.</p> </li> <li> <p>Must be familiar with operational capabilities and limitations of aircraft systems.</p> </li> <li> <p>Must be customer oriented.</p> </li> </ul> <p> </p> </div></div></div></div></div></div></div></div></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Wood is recruiting for a Rotating Mechanical Engineer to join its Iraq business unit focusing on developing and implementing preventive and predictive maintenance programs for rotating equipment.</p><br><p>This role is a full-time on-site role in Basra, Iraq with travel requirement.</p><br><p><strong>Reports to:</strong> Construction Manager</p><br><br> Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy &amp; Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com<br> <b>Diversity Statement&nbsp;</b><br> We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.<br> </div>