Equipment operator Jobs

<p>The Mechanical &amp; Rotating QC Inspector is responsible for monitoring, supervising, and controlling all Quality Control activities related to mechanical static and rotating equipment within the AGUP2 Project CPF2 Package. He ensures that all contractual, technical, and quality requirements are properly implemented by the Contractor and Subcontractors during Construction, Pre-commissioning, and Commissioning phases. The position reports directly to the CPF2 Site QC Superintendent and works closely with Construction, Commissioning, QC disciplines, Vendors, and Contractor/Subcontractor teams .</p><p><strong>MAIN MISSIONS/RESPONSIBILITIES</strong></p><p><strong>Daily Inspection &amp; Reporting</strong></p><ul><li>Monitor and record all rotating equipment activities on a daily basis.</li><li>Conduct routine inspections in construction areas, equipment installation zones, and pre-commissioning areas.</li><li>Perform specific inspections on rotating machinery and associated installation activities.</li><li>Provide daily update and weekly reporting directly to the CPF2 Site QC Superintendent, covering:</li><ul><li>Inspection progress and key findings</li><li>Non-conformities and recurring defects</li><li>Critical issues requiring escalation or arbitration</li><li>Status of corrective actions</li><li>Quality trends and contractor performance indicators</li></ul><li>Contribute actively to daily/weekly QC coordination meetings and ensure the QC Superintendent receives all relevant data for consolidated site reporting.</li><li>Maintain up-to-date records, ITP follow-up, NCR/CAR tracking, and Mechanical Completion documentation enabling full visibility for the QC Superintendent.</li></ul><p><strong>Rotating Equipment Installation &amp; Inspection</strong></p><ul><li>Inspect rotating equipment such as: Pumps (centrifugal, reciprocating, screw), Compressors (reciprocating, centrifugal), Turbines, Electric motors, Blowers and fans</li><li>Verify foundations, grout, anchor bolts, leveling, and mounting conditions for rotating equipment.</li><li>Check alignment (cold/hot), coupling installation, run-out, and shaft rotation.</li><li>Verify lubrication systems, mechanical seals, and auxiliary systems.</li><li>Review and validate inspection reports, punch lists, and test results (vibration, performance, run-in).</li><li>Ensure compliance with vendor documentation, project specifications, and industry standards.</li></ul><p><strong>Pre-Commissioning &amp; Commissioning</strong></p><ul><li>Witness and verify rotating equipment pre-commissioning activities: Oil flushing, Lubrication system checks, Motor solo-run, Direction of rotation, Alignment verification</li><li>Participate in commissioning tests: Vibration analysis, Performance testing, Functional checks</li><li>Ensure all rotating equipment is ready for handover to Commissioning.</li></ul><p><strong>Documentation &amp; Compliance</strong></p><ul><li>Review and comment on Contractors' and Suppliers' ITPs, Method Statements, and procedures.</li><li>Ensure proper implementation of approved drawings, QC plans, surveillance plans, and ITPs.</li><li>Verify vendor documentation, equipment certification files, and material certificates.</li><li>Issue Quality Records, NCRs, and CARs when required.</li><li>Ensure proper traceability of inspections, tests, and mechanical completion documentation.</li></ul><p><strong>Welding, NDT &amp; Interfaces (Only where rotating equipment interfaces with piping or structural supports)</strong></p><ul><li>Coordinate with QC Welding, NDT, Piping, and Structural teams for interface inspections.</li><li>Verify NDT results related to rotating equipment supports, baseplates, and connected piping.</li><li>Ensure correct implementation of flange alignment and piping connection tolerances.</li></ul><p><strong>Non-Conformities &amp; Corrective Actions</strong></p><ul><li>Identify and report non-conformities or deviations in a timely manner.</li><li>Ensure corrective actions are implemented and verified.</li><li>Immediately escalate critical anomalies to the QC Superintendent.</li></ul><p><strong>Coordination &amp; Interface</strong></p><ul><li>Participate in daily/weekly construction and QC coordination meetings.</li><li>Interface with Construction, Commissioning, Engineering, Vendors, and Contractor QC teams.</li><li>Support technical clarifications and design queries with Engineering when required.</li><li>Participate in audits (Construction, HSE, QC) and site visits.</li><li>Ensure confidentiality of all documentation under responsibility.</li></ul><p><strong>Scope of Work</strong></p><p><strong>Rotating Equipment</strong></p><p>The Mechanical &amp; Rotating QC Inspector covers the following equipment categories:</p><ul><li><strong>Rotating Equipment</strong><ul><li>Centrifugal pumps</li><li>Reciprocating pumps</li><li>Screw pumps</li><li>Centrifugal compressors</li><li>Reciprocating compressors</li><li>Gas/steam turbines</li><li>Electric motors</li><li>Blowers and fans</li><li>Mechanical packages containing rotating components</li></ul></li><li><strong>Associated Systems</strong><ul><li>Alignment systems (laser, dial indicator)</li><li>Lubrication systems</li><li>Mechanical seals</li><li>Couplings</li><li>Vibration monitoring systems</li><li>Auxiliary systems (cooling, sealing, lubrication)</li></ul></li></ul><p><strong>Desired Candidate Profile</strong></p><p>Professional Experience Minimum 10 years of experience in Mechanical &amp; Rotating QC on major Oil &amp; Gas EPC projects. Strong experience with rotating equipment installation, alignment, and commissioning. Experience on CPF, refinery, or large industrial facilities is strongly preferred. Demonstrated ability in resource planning, decision-making, and team coordination.</p><p>Technical Competencies Solid knowledge of rotating equipment ( pumps, compressors, turbines, motors, fans ). Strong understanding of mechanical installation requirements ( alignment, foundations, couplings ). Ability to interpret standards, codes, specifications, and technical drawings. Proficiency with measuring instruments ( micrometers, calipers, dial indicators, laser alignment tools ). Knowledge of vibration analysis and performance testing. Understanding of NCR, deviation, and concession processes. Familiarity with digital QC systems ( Aconex, SharePoint, SmartPlant, or equivalent ) is a plus.</p><p>Behavioral Competencies Exemplary behavior regarding Company Code of Conduct and HSSE rules. Ensure that all HSSE training are completed and HSE rules implemented within his area of responsibility. Ability to represent the Company in discussions and meetings with Vendors, Contractors, and Subcontractors. High attention to detail and strong reporting discipline. Ability to work autonomously in a harsh, remote site environment. Leadership, team spirit, and resilience under pressure. Ability to transfer knowledge to team members. Fluent English (mandatory).</p>

<h2>Mechanical Maintenance Manager</h2><p><strong>Location:</strong> Iraq<br><strong>Industry:</strong> Food Manufacturing – New Pasta Production Plant<br><strong>Department:</strong> Engineering & Maintenance<br><strong>Reports To:</strong> Plant Manager</p><h3>Job Purpose</h3><p>The Mechanical Maintenance Manager is responsible for leading all mechanical maintenance activities to ensure maximum equipment reliability, operational efficiency, and production continuity. The role oversees preventive, predictive, and corrective maintenance programs while supporting the successful commissioning and operation of a new pasta manufacturing facility.</p><h3>Key Responsibilities</h3><ul><li><p>Develop, implement, and continuously improve preventive, predictive, and corrective maintenance programs for all mechanical equipment.</p></li><li><p>Lead, supervise, and develop the mechanical maintenance team to achieve high performance and technical excellence.</p></li><li><p>Support the installation, commissioning, and start-up of new production lines and utility systems.</p></li><li><p>Ensure maximum equipment availability and minimize production downtime.</p></li><li><p>Investigate equipment failures using Root Cause Analysis (RCA) and implement permanent corrective actions.</p></li><li><p>Prepare annual maintenance plans, budgets, and spare parts strategies.</p></li><li><p>Implement and maintain a Computerized Maintenance Management System &#40;CMMS&#41;, where applicable.</p></li><li><p>Coordinate closely with Production, Quality, Utilities, and Warehouse departments to ensure smooth plant operations.</p></li><li><p>Manage critical spare parts inventory and optimize maintenance costs.</p></li><li><p>Supervise contractors, equipment suppliers, and external service providers.</p></li><li><p>Ensure compliance with health, safety, environmental, and food safety standards.</p></li><li><p>Monitor and report key maintenance performance indicators, including:</p><ul><li><p>Equipment Availability</p></li><li><p>Downtime</p></li><li><p>Mean Time to Repair (MTTR)</p></li><li><p>Mean Time Between Failures (MTBF)</p></li><li><p>Maintenance Cost Performance</p></li></ul></li><li><p>Drive continuous improvement initiatives to increase equipment efficiency and reliability.</p></li><li><p>Ensure all maintenance documentation, SOPs, and technical records are accurate and up to date.</p></li></ul><p></p><p><strong>Requirements</strong></p><h3>Qualifications</h3><ul><li><p>Bachelor's degree in Mechanical Engineering or a related discipline.</p></li><li><p>Minimum of 8–10 years of experience in mechanical maintenance within a manufacturing environment.</p></li><li><p>At least 3–5 years of experience in a maintenance leadership or managerial role.</p></li><li><p>Previous experience in food manufacturing is highly preferred, particularly in pasta, flour milling, bakery, or similar processing industries.</p></li></ul><h3>Preferred Experience</h3><ul><li><p>Hands-on experience with <strong>Anselmo</strong> pasta production lines is highly preferred.</p></li><li><p>Experience with Italian pasta processing equipment manufacturers such as Pavan, Fava, Braibanti, or equivalent is an advantage.</p></li><li><p>Strong knowledge of pasta processing equipment including mixers, presses, dryers, conveyors, packaging machines, and related auxiliary systems.</p></li><li><p>Experience in the commissioning and start-up of new manufacturing facilities is highly desirable.</p></li></ul><p></p>

<p>Job Summary We are seeking an experienced Mechanical Engineer to supervise and execute mechanical installation activities for static and rotating equipment on a large-scale construction project. The successful candidate will ensure that all mechanical works are completed safely, efficiently, and in accordance with approved drawings, project specifications, quality standards, and HSE requirements. The Mechanical Engineer will work closely with construction, QA/QC, commissioning teams, and subcontractors to ensure timely project delivery while maintaining the highest standards of safety and quality.</p><p>Key Responsibilities</p><ul><li>Supervise the installation of static equipment, including pressure vessels, heat exchangers, columns, tanks, separators, and other process equipment in accordance with approved drawings and specifications.</li><li>Oversee the installation, alignment, and grouting of rotating equipment, including pumps, compressors, blowers, and packaged units, following manufacturer recommendations and project standards.</li><li>Monitor piping installation activities, including supports, routing, fit-up, and hydrotest preparation, ensuring compliance with approved drawings.</li><li>Verify equipment foundations, anchor bolt positioning, base plate leveling, and readiness prior to equipment installation.</li><li>Ensure proper execution of cold and hot alignment, shaft alignment, and pre-commissioning mechanical checks for rotating equipment.</li><li>Review mechanical documentation, including general arrangement drawings, P&amp;IDs, isometric drawings, vendor documentation, and method statements, to ensure correct site implementation.</li><li>Coordinate with QA/QC teams for inspections, material verification, NDT activities, hydrostatic testing, and mechanical completion documentation.</li><li>Collaborate with civil, electrical, instrumentation, and other disciplines to ensure effective coordination of installation activities.</li><li>Ensure compliance with applicable international standards, project specifications, and quality requirements.</li><li>Support pre-commissioning and commissioning activities, including flushing, leak testing, mechanical run tests, and system handover.</li><li>Participate in progress meetings, monitor subcontractor performance, and provide regular progress updates to site management.</li><li>Promote and maintain a strong safety culture by ensuring compliance with HSE procedures, conducting risk assessments, and supporting safe lifting, rigging, and installation practices.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in Mechanical Engineering.</li><li>7 10 years of experience in mechanical construction and installation, including static and rotating equipment.</li><li>Strong knowledge of piping systems and general mechanical installation works.</li><li>Experience with equipment installation, alignment, rigging, and mechanical completion activities.</li><li>Ability to interpret engineering drawings, P&amp;IDs, isometrics, and vendor documentation.</li><li>Familiarity with international engineering and quality standards.</li><li>Strong coordination, communication, and problem-solving skills.</li><li>Experience working on large-scale construction projects is preferred.</li></ul>

<p>Performs preventive/predictive maintenance and repair of a variety of mechanical equipment relative to their assigned location. Assists in supervising other technicians and prioritizes and/or assigns work when needed. Possesses advanced diagnostic/troubleshooting knowledge and skills. Performs advanced function testing to verify equipment readiness after maintenance. Must be proficient in understanding/interpreting mechanical schematics/drawings/prints. Ability to identify correct parts and locate them in a system search to enable accurate procurement of spares. Ensures adherence, accurate input, and maintenance of data into Halliburton's system of record. This role is responsible for following specific and detailed work processes within the Halliburton Management System (HMS) during daily job activities. Responsible for mentoring junior technicians. Responsible for ensuring duties are performed in a safe, efficient, and effective manner. Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations. Consequences of error are easily measured and can be confined.</p><p>Additional Role Responsibilities: (1). Provide the professional technical Support for static equipment and facilities operation and maintenance services; (2). Conducts detailed technical evaluations to address issues with equipment and system design, operation and maintenance; (3). Provides pertinent engineering expertise to Root Cause Failure Analysis; (4).Review and approval of mechanical data sheets of static equipment (5).Reviews affiliate, project and contractor deliverables as requested to ensure compliance with project specifications, Design Practices, Static Equipment Toolkit guidance, and best practices. Documents to be reviewed may include Piping &amp; Instrument Diagrams, equipment arrangements, equipment specifications, data sheets, vendor proposals, and technical studies; (6).Participates in design reviews, risk assessments, HAZOPs, vendor qualification, and vendor bid evaluations as requested; (7).Supports functional initiatives and maintains discipline documentation pertinent to Upstream Facilities; (8).Provides technical mentorship to less experienced engineers with emphasis on areas of identified skill gaps; (9).Proactively and continuously grows disciplines technical expertise in pertinent technologies. (10).Maintains current knowledge (e.g. through participation in industry conferences / forums).</p><p><strong>Desired Candidate Profile</strong></p><p>A high school diploma or equivalent and 5 years of experience in related mechanical fields are required. A technical school certification is preferred. Preferred Experience: Minimum of 10-years relevant experience in their discipline or in an operations environment within the oil &amp; gas industry.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Construction Supervisor -Mechanical &amp; Piping-Onsite<br><br><p><b>Job Description</b></p><br><br><p><b>Job Title: </b>Construction Supervisor -Mechanical &amp; Piping<br><b>Company: </b>KBR<br><b>Location</b>: Basra Iraq<br><b>Employment Type:</b> Full-time, Contract</p><br><br><p>Rotation: 28/28</p><br><br><p>Required Nationals Local National</p><br><br><br><p><b>About Company</b></p><br><br><p><i><u>"Belong, Connect, Grow, with KBR!</u></i></p><br><br><br><p><i>The KBR team delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</i></p><br><br><br><p><i>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets."</i></p><br><br><br><p><b><u>Roles and Responsibilities:</u></b></p><br><br><br><p>Specific responsibilities of the Construction Supervisor include:</p><br><br><p>Overall view of the role:</p><br><br><br><ul><li>Contributes to Construction Safety by reducing site exposure through modularization, standardization, and maximizing off-plot construction.</li><li>Contributes to developing brownfield/greenfield construction strategies and planning initiatives for project opportunities pre-FID.</li><li>Focuses on addressing and removing hurdles to efficient construction and actively monitors productivity on site, advising (as per the instruction) from the construction lead and the construction manager on ways to improve the productivity metrics.</li><li>Identifies and monitors brownfield/greenfield construction planning initiatives for approved projects post-FID.</li><li>Coordinate with engineering, QA/QC, and HSE teams to ensure compliance.</li><li>Working with the construction mechanical and piping lead and the construction manager to effectively execute construction deliverables for the project.</li><li>Ability to effectively work on more than one project at a time and identify and resolve site issues efficiently.</li><li>Experience in reading and understanding construction drawings (ISOs, GAD, and P&amp;ID).</li><li>Experience in reading and understanding LOSH, Test packs, hydrotesting, flushing, and all pre-commissioning requirements.</li><li>Coordinate with the Contractor/Subcontractor's day-to-day mechanical and piping construction activities at site, assembly, torquing, Installation, Reinstatement, and Final completion of the subsystem, both Brownfield and Greenfield projects.</li><li>Experience in rotating equipment construction activities. Including but not limited to the installation, managing the quality of the executed work, and alignment requirements till the mechanical completion stage.</li><li>Wide experience in static mechanical construction activities, including but not limited to piping fabrication, good knowledge of preparing piping MTOs, weld maps, and enough experience for the piping quality requirements (NDT, PWHT, Etc.).</li><li>Having strong experience in shutdown requirements, including but not limited to tie-ins and hook-up spools.</li></ul><br><p><b><u>Accountabilities/Expectations:</u></b></p><br><br><br><ul><li>Coordinate with all the team members, follow up daily with the construction lead he will be assigned to and the construction manager.</li><li>Ensure that the project planning is deliverable from Engineering and that Contracts &amp; Procurement aligns with the construction and handover sequences.</li><li>Ensure designs optimally use cold work, modularization, and off-plot construction to minimize on-site HSSE exposure.</li><li>Ensure to follow the final/approved design during construction.</li><li>Good knowledge of international standards (ASME, API, etc.)</li><li>Strong understanding of safety/HSE regulations, procedures, and PTW system.</li></ul><br><p><b><u>Education, Skills &amp; Experience:</u></b></p><br><br><ul><li>BSc., University degree in mechanical.</li></ul><br><p><b><u>Experience and Skillset</u></b></p><br><br><ul><li>Minimum 10-12 years’ Construction experience in Oil and Gas-related projects with strong proof for piping and rotating roles.</li><li>Strong leadership and teambuilding skills; supervisory experience.</li><li>Experience in Static and rotating equipment installation and Alignment.</li><li>Strong software skills, Microsoft Office, document websites, 3D module review, and prefer to have good knowledge of software design (AutoCAD).</li><li>Strong level in English language to communicate properly with the team members and all stakeholders.</li></ul><br><br><br><br><br><br><br> </div>

<p>Request for Quotation For Supply, Delivery, Installation, Testing, Commissioning and After-Sales Support of Equipment and Furnishings for the Establishment of a One-Stop Shop Public Employment Services (PES) Centre in both Erbil and Dohuk- Kurdistan Region of Iraq</p><p>BACKGROUND The International Labour Organization (ILO) is implementing activities under the Promoting Employment and Employability among Refugees, Internally Displaced Persons (IDPs) and Host Communities focusing on Women, PWDs, and Youths in Northern Iraq project. The project aimed at better Labour market integration and transition of marginalized populations including refugees, internally displaced persons, host communities as well as youth and women, into decent jobs through supportive evidence-based policies, strengthened employment services, work-based learning, and skills development, with a focus on green jobs and green enterprise development. As part of this initiative, two One-Stop Shop Public Employment Services (PES) Centre will be established to provide integrated employment and Labour market services to jobseekers, employers, entrepreneurs, persons with disabilities, youth, women, migrants, returning migrants and other vulnerable populations. The One-Stop Shop concept is intended to provide jobseekers with access to multiple employment-related services from a single location, reducing transaction costs and improving service efficiency. The centre will facilitate job matching, career counselling, vocational guidance, labour market information, entrepreneurship support, referral to skills development programmes, social protection information, and employer services. To operationalise the centre, the ILO intends to procure office furniture, ICT equipment, networking infrastructure, communication systems, training facilities, customer service equipment and associated installation and commissioning services. Qualified suppliers are therefore invited to submit quotations for the supply, delivery, installation, testing, commissioning, training and warranty support for the required equipment.</p><p>OBJECTIVE Assignment Objectives: The objective of this procurement is to engage a competent supplier capable of providing a complete, operational and fully equipped One-Stop Shop Public Employment Services Centre through the supply and installation of modern equipment, furniture and ICT infrastructure. The supplier shall ensure that all equipment is delivered, installed, tested and commissioned to enable immediate operation of the centre upon completion.</p><p><b>SpecificObjectives</b></p><ul><li>Establish a fully operational One-Stop Shop Public Employment Services Centre.</li><li>Equip the center with modern ICT infrastructure to support digital employment services.</li><li>Install networking infrastructure to facilitate internal communication and internet connectivity.</li><li>Establish facilities for client registration, counselling, training and employer engagement.</li><li>Ensure sustainability through warranty, maintenance support and after-sales services.</li></ul><p>SCOPEOF ASSIGNMENT The International Labour Organization seeks for a company/ organization to supply, deliver, install, test, commission and provide after-sales support of equipment and furnishings for the establishment of two One-Stop Shop Public Employment Service (PES) Centers in Erbil and Duhok governorates of Kurdistan Region of Iraq by 27 August 2026. The assignment includes the following:</p><ul><li>Supply, deliver &amp; install IT equipment to the both locations in Erbil and Dohuk as per the below table &amp; specifications:</li><li>Component 5: Installation and Commissioning The supplier shall:</li><ul><li>Deliver all equipment.</li><li>Coordinate installation of ICT equipment in both locations (Erbil and Dohuk).</li><li>Conduct functional testing</li><li>Rectify defects before handover</li></ul></ul><p>DELIVERABLES The selected supplier will produce the following deliverables:</p><ul><li>Delivery notes</li><li>Equipment inventory</li><li>Asset register</li><li>Warranty certificates</li><li>User manuals</li><li>Maintenance schedules</li><li>Final accomplishment report</li></ul><p><b>QUALIFICATIONS AND REQUIREMENTS </b>The interested suppliers shall demonstrate the following:</p><ul><li>Legal registration.</li><li>Tax compliance.</li><li>At least five years of experience in doing similar work.</li><li>Similar assignments completed for government, UN agencies or development partners.</li><li>Availability of qualified engineers.</li><li>Manufacturer authorization (where applicable).</li><li>Financial capacity.</li><li>Local maintenance capability.</li></ul><p><br></p><p><strong>Desired Candidate Profile</strong></p><ul><li>Legal registration.</li><li>Tax compliance.</li><li>At least five years of experience in doing similar work.</li><li>Similar assignments completed for government, UN agencies or development partners.</li><li>Availability of qualified engineers.</li><li>Manufacturer authorization (where applicable).</li><li>Financial capacity.</li><li>Local maintenance capability.</li></ul>

<p>Support the operation, maintenance and reliability of Data Center telecom infrastructure and equipment to ensure continuous service availability and operational efficiency Perform daily operation and maintenance activities for Data Center telecom infrastructure and equipment. Monitor alarms, equipment status, and system performance, and report abnormalities. Perform preventive and corrective maintenance activities to ensure service continuity and minimize downtime. Install, maintain, and troubleshoot telecom equipment, fiber optic systems, connectivity infrastructure, and tower-mounted equipment within the Data Center site. Support the implementation of approved maintenance activities and Change Requests (CRs).</p><p><strong>Desired Candidate Profile</strong></p><p>A degree or diploma Computer /Software offices English &amp; Arabic languages Communication and Collaboration 0 - 2-year experiences Behavioral Competencies: Delivering Results &amp; Fostering Ownership Building Customer Value Technical Competencies: Data Center Operation &amp; Maintenance Network Monitoring Safety Management Troubleshooting &amp; Technical Problem Solving</p>

<p>Job Specification • Act as the primary liaison and first point of contact for ATC, RFF, Ground Handling Agents, Airlines, Engineering, and external stakeholders on all airside operational matters during the shift, escalating to the Head of Airside Operations where required. • Ensure strict enforcement of Airside Driving Regulations (ADR), Apron Discipline, and all active Airside Driving Permits (ADP) and Airside Vehicle Permits (AVP) throughout the shift; direct shift inspectors to act on violations and authorize the issuance of Non-Compliance Notices (NCN). • Coordinate and direct Wildlife Hazard Management activities during the shift, ensuring that wildlife observations are reported, logged, and acted upon in accordance with the Wildlife Hazard Management Plan, and that the runway and movement area remain safe for operations. • Oversee apron safety and operational discipline across all apron zones, including monitoring of ground handling activities, FOD prevention, fuel safety compliance, and resolution of apron. • Authorize and oversee emergency and contingency responses for airside-specific incidents during the shift — including runway/taxiway incursions, ground handling accidents, FOD alerts, fuel spills, airside vehicle accidents, and wildlife strikes — in accordance with the Airport Emergency Plan (AEP) and Airside Operations contingency procedures. • Complete, review, and submit comprehensive shift log reports capturing all significant events, incidents, operational decisions taken, and handover notes for each shift, ensuring accurate and auditable records for the Head of Airside Operations. • Conduct or delegate shift airside inspections of the movement area, apron, perimeter roads, and active worksites, ensuring compliance with ICAO Annex 14 standards, aerodrome certification requirements, and airport operational procedures. • Represent Airside Operations in real-time coordination calls, Airside Operations Room meetings, and pre/post-flight briefings during the shift as required. Human and Technical Resources • Direct and coordinate the full complement of Airside Operations shift staff across all sections for the duration of the shift, ensuring appropriate task allocation, coverage of all operational zones, and staff welfare. • Utilize the available management systems, stand planning tools, NOTAM databases, radio communication systems, and CCTV/surveillance platforms to maintain real-time situational awareness and operational control throughout the shift. • Ensure all shift operational vehicles and equipment are serviceable and deployed effectively; report unserviceable assets to the Head of Airside Operations and Engineering for immediate action. Planning and Programme • Review and brief all shift staff on the daily flight programme, scheduled airside works, active NOTAMs, planned closures, and any regulatory or safety advisories at shift commencement. • Contribute shift-level observations and operational data to the continuous improvement of Airside Operations procedures, SOPs, and contingency plans by providing structured feedback to the Head of Airside Operations. Core Operational Activities • Execute structured shift start and shift end handovers, ensuring all active permits, incidents, NOTAMs, ongoing works, and outstanding actions are clearly communicated and transferred to the incoming duty manager. • Authorize real-time operational decisions including temporary runway/taxiway restrictions, emergency equipment pre-positioning, and suspension of airside work activities when safety is at risk. • Coordinate the activation and stand-down of airside emergency responses for airside-specific incidents, ensuring all relevant parties (ATC, RFF, Ground Handlers, Engineering, airside operations team) are notified and deployed in accordance with the AEP. • Monitor and enforce FOD (Foreign Object Debris/Damage) prevention programmes across all apron and movement area zones, directing FOD inspections and ensuring immediate clearance of any identified debris. Human Resources Management • Provide direct line management, mentoring, and performance evaluation for all operational shift subordinates in alignment with the airport HR and competency framework. • Manage leave planning, duty rosters, and workforce scheduling to ensure continuous, uninterrupted operational coverage of all shift functions. • Identify training and career development opportunities for Operations Section staff and foster a safety-first, accountability-driven team culture.</p><p>Education • Bachelor's Degree, (Preferably in Aviation Management, Airport Operations, Aeronautical Science) Engineering, or a related discipline from a recognized institution. • A post-graduate qualification or diploma in Aviation/Airport Management is an added advantage) Experience • Minimum 6 years of progressive experience in airport airside operations, of which at least 2 years must be in a supervisory or senior Operational role with demonstrated shift management responsibility. • Proven experience in apron management, movement area operations, airside safety enforcement, and emergency/contingency coordination. • Experience across multiple Airside Operational functions is highly desirable. Computer Skills • Professional knowledge of Microsoft Suite (especially Word, PowerPoint and Excel) (Essential) • Demonstrated competency with various Airport Operations Management Systems (AODB, FIDS, stand planning tools), NOTAM databases, radio communication systems, and airside surveillance/CCTV platforms. Language Skills • English: solid written and spoken proficiency (Essential). English Language Proficiency - Minimum ICAO Level 4 or equivalent • Arabic: working proficiency (Desirable). Training Requirements • ICAO Annex 14 – Aerodromes (Essential). • ICAO Safety Management System (SMS) – ICAO-recognized institute (Essential). • Coordination of Emergency Response (Aerodrome Emergency Planning) (Essential). • Airside Driving Permit / Airside Driving Assessor certification (Highly Desirable). • Aerodrome Wildlife Hazard Management (Highly Desirable). • FOD Prevention Programme certification (Highly Desirable). • First Aid / Basic Life Support (Desirable).</p>

<p>Perform rigging, lifting, and hoisting activities in accordance with approved lifting plans and safety procedures. Inspect and select appropriate lifting gear, including slings, shackles, hooks, wire ropes, and other rigging equipment. Ensure all lifting equipment is in safe working condition before use. Attach, secure, balance, and guide loads during lifting operations. Communicate effectively with crane operators using standard hand signals and radio communication. Establish and maintain safe lifting zones to protect personnel and equipment. Monitor lifting operations and immediately report unsafe conditions or equipment defects. Assist in the assembly, dismantling, and positioning of lifting equipment when required. Coordinate with supervisors, crane operators, and other team members to ensure safe and efficient lifting operations. Maintain proper housekeeping and ensure work areas remain clean and hazard-free. Comply with all company policies, client requirements, and site safety regulations. Support the successful completion of project activities while maintaining the highest standards of safety and quality.</p><p><strong>Desired Candidate Profile</strong></p><p>Minimum 3 years of experience as a Rigger in construction, infrastructure, oil &amp; gas, or industrial projects. Good knowledge of lifting operations, rigging techniques, and load handling procedures. Ability to inspect and identify suitable lifting gear and rigging equipment. Familiarity with lifting plans, load charts, and safe lifting practices. Basic English communication skills. Physically fit and capable of working in demanding site conditions. Valid rigging certification (if applicable as per project/client requirements). Knowledge of site safety regulations, permit-to-work systems, and hazard identification.</p>

<p>Welders fabricate and assemble metal structures and equipment through the use of welders, cutters, shapers and measuring tools. Welders produce metal products according to customer or employer specifications. Welders set up, operate and maintain welding equipment.</p><p><strong>Desired Candidate Profile</strong></p><p>Welders fabricate and assemble metal structures and equipment through the use of welders, cutters, shapers and measuring tools. Welders produce metal products according to customer or employer specifications. ... Welders set up, operate and maintain welding equipment.</p>

<p>The Avionics Technician performs aircraft maintenance to include inspection, operational test, repair, modification and replacement of aircraft electrical / avionics systems and components. Applies technical knowledge and skills to troubleshoot electrical / avionics discrepancies.</p> <div> <div> <div> <div> <div> <div> <div> <div> <div> <p> </p> <p> <b>Essential Responsibilities:</b> </p> <ul> <li> <p>Possess in-depth knowledge of applicable maintenance/technical manuals and publications, and special tools and test equipment. Must be familiar with operational capabilities and limitations of electrical/avionics systems</p> </li> <li> <p>Possess a high degree of expertise of aircraft electrical/avionics systems</p> </li> <li> <p>Performs the inspection, testing, troubleshooting, repair, modification and rewiring as required of complex avionics/electrical systems and subsystems discrepancies and modifications</p> </li> <li> <p>Use schematic diagrams, blueprint drawings, maintenance manuals and factory publications to operate, modify, test and repair aircraft electrical / avionics systems.</p> </li> <li> <p>Utilize test equipment to include but not limited to digital volt / amp meter, transponder ramp tester, fuel quantity tester, ITT calibration test set, and other test equipment required in the troubleshooting, modification, and repair of avionics / electrical systems.</p> </li> <li> <p>Order parts and materials.</p> </li> <li> <p>Obtain and maintain qualification as a Plane Captain and any associated licenses/qualifications necessary to perform the duties of an OMAT2. </p> </li> <li> <p>Operate ground support equipment.</p> </li> <li> <p>Identify and treat avionics/ electrical corrosion.</p> </li> <li> <p>Perform aircraft jacking and hoisting as required.</p> </li> <li> <p>Perform certification and re-certification of altimeter systems.</p> </li> <li> <p>Perform calibration of directional guidance systems.</p> </li> <li> <p>Required to perform collateral duty inspections.</p> </li> <li> <p>Must obtain and keep current turn qualification.</p> </li> <li> <p>Maintain cleanliness of the work center.</p> </li> <li> <p>Comply with Foreign Object Damage (FOD), Egress Familiarization, and Hazardous Waste and Tool Control programs.</p> </li> <li> <p>Comply with all established general and industrial safety rules and regulations as applicable to the contract, facility, and job assignment.</p> </li> <li> <p>Assist as directed to ensure safety, security and preservation of government / company owned equipment.</p> </li> <li> <p>Present a courteous and professional demeanor when dealing with customers.</p> </li> <li> <p>Furnish and maintain own hand tools.</p> </li> <li> <p>Operate portable firefighting equipment.</p> </li> <li> <p>Operate aircraft ground servicing equipment including vehicles, tugs, tractors, servicing carts, aircraft jacks and hoists, test equipment, hand tools, power tools.</p> </li> <li> <p>Perform all other position related duties as assigned or requested.</p> </li> </ul> <p> </p> <p> <b>Minimum Qualifications:</b> </p> <ul> <li> <p>Satisfactory completion of U.S. Armed Forces aircraft avionics school or other schools with equivalent curriculum or three (3) years of on-the-job training and / or experience working with similar avionics systems and components is required.</p> </li> <li> <p>Graduation from high school or GED required.</p> </li> <li> <p>Must be able to meet any Government / Company licensing / qualification requirements for the position.</p> </li> <li> <p>Must have an FAA Airframe and Powerplant (A&amp;P) License.</p> </li> <li> <p>Must have three (3) years experience in T6 aircraft electrical / avionics maintenance including avionics corrosion detection, treatment and prevention, performing maintenance on avionics and/ or electrical systems, utilizing tools, blueprints, drawings, wiring diagrams, schematics and normal safety requirement.</p> </li> <li> <p>Demonstrate a basic knowledge of aircraft systems and nomenclature. </p> </li> <li> <p>Possess working knowledge and skill in the use of basic tools and test equipment.</p> </li> <li> <p>Must be familiar with the operational capabilities and limitations of electrical / avionics systems.</p> </li> <li> <p>Possess a working knowledge of the detection, prevention, and treatment of corrosion.</p> </li> <li> <p>Must be able to read, write, understand, and communicate the English language and follow verbal and written instruction.</p> </li> <li> <p>Must obtain and keep current turn qualification.</p> </li> </ul> </div></div></div></div></div></div></div></div></div>

<p><h4>Essential responsibilities:</h4> <p>The avionics technician performs aircraft maintenance to include inspection, operational test, repair, modification and replacement of aircraft electrical/avionics systems and components. Applies technical knowledge and skills to troubleshoot electrical/avionics discrepancies.</p> <ul> <li>Possess in-depth knowledge of applicable maintenance/technical manuals and publications, and special tools and test equipment. Must be familiar with operational capabilities and limitations of electrical/avionics systems.</li> <li>Possess a high degree of expertise of aircraft electrical/avionics systems.</li> <li>Performs the inspection, testing, troubleshooting, repair, modification and rewiring as required of complex avionics/electrical systems and subsystems discrepancies and modifications.</li> <li>Use schematic diagrams, blueprint drawings, maintenance manuals and factory publications to operate, modify, test and repair aircraft electrical/avionics systems.</li> <li>Utilize test equipment to include but not limited to digital volt/amp meter, transponder ramp tester, fuel quantity tester, ITT calibration test set, and other test equipment required in the troubleshooting, modification, and repair of avionics/electrical systems.</li> <li>Order parts and materials.</li> <li>Obtain and maintain qualification as a plane captain and any associated licenses/qualifications necessary to perform the duties of an OMAT2.</li> <li>Operate ground support equipment.</li> <li>Identify and treat avionics/electrical corrosion.</li> <li>Perform aircraft jacking and hoisting as required.</li> <li>Perform certification and re-certification of altimeter systems.</li> <li>Perform calibration of directional guidance systems.</li> <li>Required to perform collateral duty inspections.</li> <li>Must obtain and keep current turn qualification.</li> <li>Maintain cleanliness of the work center.</li> <li>Comply with foreign object damage (FOD), egress familiarization, and hazardous waste and tool control programs.</li> <li>Comply with all established general and industrial safety rules and regulations as applicable to the contract, facility, and job assignment.</li> <li>Assist as directed to ensure safety, security and preservation of government/company owned equipment.</li> <li>Present a courteous and professional demeanor when dealing with customers.</li> <li>Furnish and maintain own hand tools.</li> <li>Operate portable firefighting equipment.</li> <li>Operate aircraft ground servicing equipment including vehicles, tugs, tractors, servicing carts, aircraft jacks and hoists, test equipment, hand tools, power tools.</li> <li>Perform all other position related duties as assigned or requested.</li> </ul> <h4>Minimum qualifications:</h4> <ul> <li>Satisfactory completion of U.S. Armed Forces aircraft avionics school or other schools with equivalent curriculum or three (3) years of on-the-job training and/or experience working with similar avionics systems and components is required.</li> <li>Graduation from high school or GED required.</li> <li>Must be able to meet any government/company licensing/qualification requirements for the position.</li> <li>Must have an FAA Airframe and Powerplant (A&P) license.</li> <li>Must have three (3) years’ experience in T6 aircraft electrical/avionics maintenance including avionics corrosion detection, treatment and prevention, performing maintenance on avionics and/or electrical systems, utilizing tools, blueprints, drawings, wiring diagrams, schematics and normal safety requirements.</li> <li>Demonstrate a basic knowledge of aircraft systems and nomenclature.</li> <li>Possess working knowledge and skill in the use of basic tools and test equipment.</li> <li>Must be familiar with the operational capabilities and limitations of electrical/avionics systems.</li> <li>Possess a working knowledge of the detection, prevention, and treatment of corrosion.</li> <li>Must be able to read, write, understand, and communicate the English language and follow verbal and written instruction.</li> <li>Must obtain and keep current turn qualification.</li> </ul></p><p></p>

<p><h4>Duties</h4> <p>Responsible for maintaining a safe workplace and ensuring that safety is the highest priority in the workplace.<br> Comply with all Environmental Health & Safety and Quality Assurance requirements and goals.<br> Provide information and materials to these divisions as necessary to ensure adequate and legal documentation.<br> Ensures data accuracy and update of equipment inventory database.<br> Ensure that related data related to activities meet the requirements.<br> Process excess documentation for all controlled and non-controlled excess equipment and materials.<br> Review, reconcile, adjust and process all inventory transactions.<br> Process and coordinate equipment transfers.<br> Assist in a broad scope of direct and indirect support activities involving customer owned equipment as necessary to complete assigned tasks.<br> Conduct daily inspections of assigned equipment and immediately report defects or maintenance requirements.<br> Assist with scrap metal processing and preparation for disposal or recycling.<br> Assist in contingency waste removal operations during emergencies, special events, or increased operational requirements.<br> Perform additional duties and projects assigned.</p> <h4>Required</h4> <p>Minimum acceptable experience level: minimum 4 or more years’ experience handling waste management and disposal activity.<br> Previous experience in waste management, sanitation, logistics, construction support, or material handling preferred.<br> Ability to operate or learn disposal collection equipment and material handling equipment.<br> Ability to communicate effectively with supervisors and team members.</p> <h4>Knowledge, Skills, and Abilities</h4> <ul> <li>Prior proven experience in property disposal operations with Defense Reutilization.</li> <li>Experience operating heavy equipment to include up to a 30K forklift, extended reach forklift, material handler, grappler (excavator), front end loader and material shredders.</li> <li>Experience with cutting torches to include plasma cutters.</li> <li>Commitment to maintaining a high-performance team which delivers customer service excellence.</li> <li>Knowledge of principles and processes involved in supporting contract responsibilities at an overseas facility.</li> <li>Ability to work in a fast-paced environment requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules.</li> <li>Cross-cultural sensitivity with an international perspective.</li> <li>Excellent organizational and time management skills.</li> <li>Computer skills, specifically in Microsoft Word and Excel.</li> <li>Ability to become an active and functioning member of a team.</li> <li>Ability to be innovative and be an agent for change.</li> <li>Ability to prioritize multiple tasks in a fast-paced operational environment.</li> <li>Basic recordkeeping and reporting skills.</li> </ul> <h4>Physical Requirements</h4> <ul> <li>Frequently lift and carry materials weighing up to 25 kg.</li> <li>Stand, walk, bend, climb, kneel, and work for extended periods.</li> <li>Operate manual and powered equipment safely.</li> <li>Work in dusty, noisy, and outdoor environments.</li> <li>Wear required PPE, including safety boots, gloves, eye protection, hearing protection, and reflective clothing.</li> </ul> <h4>Working Conditions</h4> <ul> <li>Outdoor and industrial work environment.</li> <li>Exposure to heat, dust, noise, and moving equipment.</li> <li>May be required to work overtime, weekends, holidays, or emergency callouts to support mission requirements.</li> </ul> <h4>Performance Expectations</h4> <ul> <li>Complete disposal operations safely, efficiently, and on schedule.</li> <li>Maintain high standards of cleanliness throughout assigned work areas.</li> <li>Ensure waste is properly segregated and disposed of in accordance with environmental requirements.</li> <li>Demonstrate reliability, professionalism, accountability, and teamwork while supporting mission operations.</li> </ul> <h4>Education</h4> <p>A high school diploma or GED (General Education Diploma). Certifications or 4 years’ substitute experience in waste management and disposal services will be acceptable.<br> Valid Iraqi driver’s license (if operating company vehicles).</p> <h4>Security Vetting</h4> <p>Already possess a RSO issued security clearance or be able to obtain a favorable RSO issued clearance prior to being hired is required for the position. Must maintain eligibility at the required certification or clearance level for the duration of the contract.</p> <h4>Language Skills</h4> <p>Satisfactory English and Arabic proficiency to meet job requirements and to adhere and comply with safety, health, and security measures.</p> <h4>Medical</h4> <p>Successfully complete and pass the medical and drug examinations as required by Amentum and our customer for deployment to Iraq. Must maintain physical and drug requirements for duration of deployment.</p> <h4>Desired</h4> <ul> <li>Previous out of home country experience and previous work experience in harsh environmental conditions are a plus.</li> <li>Experience supporting Department of State.</li> <li>Experience working with Amentum.</li> </ul> <h4>Other Knowledge, Skills and Abilities</h4> <ul> <li>Knowledge of the principles and processes involved in Quality Control Management.</li> <li>Successful management of multiple sites in geographically dispersed locations.</li> <li>Ability to collect, analyze and summarize data and to prepare clear and concise reports.</li> <li>Experience in effectively dealing with international and headquarters staff, and sensitivity to other cultures.</li> <li>Exercise sound judgment and make decisions independently.</li> <li>Excellent organizational and time management skills, with the ability to handle multiple tasks and administrative details in a fast paced and constantly changing environment.</li> <li>Expert communication skills to facilitate and disseminate information.</li> </ul> <h4>Working and Living Conditions</h4> <p>This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environment. Temperatures can reach 120-130 degrees Fahrenheit/50-55 degrees Celsius during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to Iraq for extended periods. Work schedules are a minimum of 6 days per week and 10 hours per day, while some jobs have higher daily and weekly minimums. Employees must be willing and able to perform physical activities including, but not limited to, heavy lifting and moving of items, parts, assemblies, and equipment up to the safety regulation maximum; climbing in and out of equipment; crawling; and working outdoors. This includes being able to lift and carry 40 pounds of personal protective equipment for extended periods of time and being capable of running and ‘duck & cover’ during emergencies without putting oneself or others at risk.</p></p><p></p>

<p>ey Responsibilities</p><p>1- Production Management</p><ul><li><p>Prepare daily, weekly, and monthly production plans in coordination with Sales and Warehouse departments.</p></li><li><p>Manage production orders across injection molding and IML production lines.</p></li><li><p>Monitor actual production results against targets and analyze performance gaps.</p></li><li><p>Ensure the availability of raw materials, labels, molds, packaging materials, and required manpower.</p></li><li><p>Supervise machine setup, mold changes, robot settings, color changes, and product changeovers.</p></li><li><p>Monitor production output, cycle time, rejection rate, waste, and downtime.</p></li><li><p>Ensure that finished products comply with approved specifications and samples.</p></li><li><p>Improve machine and workforce productivity and reduce mold-change time.</p></li><li><p>Coordinate with Quality Control to address non-conforming products and prevent recurrence.</p></li><li><p>Prepare and submit daily, weekly, and monthly operational reports.</p></li></ul><p>2- Maintenance Management</p><ul><li><p>Develop and implement preventive, periodic, and predictive maintenance plans.</p></li><li><p>Supervise the maintenance of injection molding machines, IML robots, molds, compressors, chillers, and auxiliary equipment.</p></li><li><p>Ensure quick diagnosis and repair of emergency breakdowns.</p></li><li><p>Conduct root-cause analysis for recurring failures and implement corrective actions.</p></li><li><p>Monitor equipment downtime and maintenance performance indicators.</p></li><li><p>Maintain complete maintenance records for each machine, mold, and piece of equipment.</p></li><li><p>Identify critical spare parts and ensure appropriate inventory levels.</p></li><li><p>Coordinate with suppliers, service providers, and external technicians when required.</p></li><li><p>Inspect completed maintenance work and confirm that equipment is safe and ready for operation.</p></li></ul><p>3- Operational Improvement</p><ul><li><p>Improve the plant’s Overall Equipment Effectiveness (OEE).</p></li><li><p>Reduce raw-material waste and the consumption of electricity, compressed air, and cooling water.</p></li><li><p>Analyze rejected products and production losses and implement improvement plans.</p></li><li><p>Develop and update Standard Operating Procedures (SOPs) and work instructions.</p></li><li><p>Lead continuous-improvement and production-capacity projects.</p></li><li><p>Participate in the evaluation and procurement of new machinery, molds, and equipment.</p></li><li><p>Prepare production and maintenance budgets and control operational costs.</p></li><li><p>Ensure the proper use and protection of company assets and equipment.</p></li></ul><p>4- Team Management</p><ul><li><p>Lead production and maintenance engineers, supervisors, technicians, operators, and workers.</p></li><li><p>Prepare shift schedules and assign duties according to operational requirements.</p></li><li><p>Evaluate employee performance and identify training requirements.</p></li><li><p>Train employees on proper operation, troubleshooting, quality, and safety procedures.</p></li><li><p>Ensure compliance with attendance, discipline, and company policies.</p></li><li><p>Promote effective coordination between Production, Maintenance, Quality, and Warehouse teams.</p></li></ul><p>5- Quality and Safety</p><ul><li><p>Ensure compliance with quality, hygiene, and housekeeping requirements for IML products.</p></li><li><p>Prevent the use of unapproved materials, labels, molds, or production parameters.</p></li><li><p>Ensure first-piece inspection is completed after startup, mold changes, or material changes.</p></li><li><p>Enforce occupational health and safety procedures and the use of personal protective equipment.</p></li><li><p>Ensure Lockout/Tagout (LOTO) procedures are followed during maintenance activities.</p></li><li><p>Investigate incidents and operational risks and implement preventive measures.</p></li><li><p>Maintain clean, safe, and organized production and maintenance areas.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><p>At least seven years of experience in industrial operations or production, including three years in a supervisory or managerial position.</p><ul><li><p>Experience in plastic</p></li></ul>

<p>Riggers are highly specialized in moving jobs that cannot be accomplished by ordinary means and use equipment expressly designed for moving and lifting objects weighing hundreds of thousands or even millions of pounds or kilograms in places where ordinary material handling equipment cannot go. He/she performs assignments, as directed by the crew chief or field supervisor, involved in the installation of power plants, facilities, and new oilfield pumping units and maintenance/inspections of existing oilfield pumping units. You may be assigned other duties to help proactively drive our FieldCore vision and align with our organization s core values.</p><p><strong>Essential Duties &amp; Responsibilities:</strong></p><ul><li>Signal or verbally direct workers engaged in hoisting and moving loads, to ensure safety of workers and materials.</li><li>Test rigging to ensure safety and reliability.</li><li>Attach loads to rigging to provide support or prepare them for moving, using hand and power tools</li><li>Select gear such as slings, shackles, chokers and winches, per load weights and sizes, facilities, and work schedules.</li><li>Control movement of heavy equipment through narrow openings or confined spaces, using chain falls, gin poles, gallows frames, and other equipment.</li><li>Tilt, dip, and turn suspended loads to maneuver over, under, and/or around obstacles, using multi-point suspension techniques.</li><li>Manipulate rigging lines, hoists, and pulling gear to move or support materials such as heavy equipment.</li><li>Clean and dress machine surfaces and component parts.</li><li>Attach pulleys and blocks to fixed overhead structures such as beams, ceilings, and gin pole booms, using bolts and clamps</li><li>Dismantle and store rigging equipment after use.</li><li>Use proper rigging apparatus (i.e. chains, slings and ropes) and techniques to ensure safe and proper lifting is performed.</li><li>Work in adverse weather conditions including high and low temperatures and windy conditions</li><li>Ensure that safety is included in all aspects of each job he/she performs.</li><li>Use this position to influence operational personnel and visitors to do the same.</li><li>Demonstrate support / use of JSAs for every task and actively assist the work group when they are developed.</li><li>Attendance of all scheduled safety meetings and training.</li><li>Participate in regular scheduled audits of equipment and tools.</li><li>Identifying sub-standard acts and near misses.</li><li>Assist in all safety and environmental incident investigations to help determine root cause.</li><li>Ensure that he complies with the required STOP Observations and Near Miss Programs</li><li>Perform other duties as assigned</li><li>Travel extensively (internationally and domestically)</li><li>Ability and willingness to work holidays, weekends and overtime as required by field assignments</li></ul><p><strong>Desired Candidate Profile</strong></p><p><strong>Required Qualifications &amp; Experience :</strong></p><ul><li>Qualified level. Able to successfully perform all requirements of the job properly.</li><li>Possess advanced skills and applies the fundamental concepts, practices and procedures of a particular field of specialization.</li><li>Basic English language skills are required.</li><li>High School Diploma and related mechanical experience (carpentry, lifts, cranes, etc.)</li><li>Rigger / Auxiliary Moving &amp; Material Handling Equipment Certifications highly desired but not required</li></ul><p><strong>Desired Characteristics:</strong></p><ul><li>Experience of power generation (gas/steam turbines) and associated auxiliary equipment</li><li>Application of the Correct Rigging Tackle (ie Capable of Safely Lifting the Specified Loads)</li><li>Identification of Specific Shackles and Beam Clamps</li><li>Color Codes of Lifting Slings or Wires be they Belt Slings or Endless Bag Slings and or Wire Strops</li><li>Safety Mandatory Emergency Stop Signals</li><li>Able to Understand and act upon the Basic Safe Systems of Work and Method Statement showing any Approved Rigging Studies.</li><li>Overhead Crane Operation be it Pendant or Cab or Remotely Operated.</li><li>Working knowledge of Forklift, Tele Handler, Scissor Lift, Cherry Picker, Tractor (Tractor Cottil with lifting Arm), O/H Crane, etc.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><strong>Job Purpose</strong></p><br><p>The commercial Team Leader (TL) supports and assists the Operations Manager, Baghdad in the day-to-day management of region-wide commercial operations and specified projects. The commercial TL has a major impact on how potential clients assess the capabilities of Control Risks and as such is responsible for setting and maintaining the highest standards of team presentation and capability. The commercial TL will be supporting an international client base that spans across oil and gas, humanitarian, infrastructure, diplomatic and financial services sectors amongst others.</p><br><p><strong>Application closing date: 31 August 2026</strong></p><br><p>Start Date: 26 September 2026</p><br><p>Salary: to be discussed with shortlisted candidates</p><br><p>Rotation: 8 weeks on / 4 weeks off</p><br><p><strong>Role tasks and responsibilities</strong></p><br><p><strong>Operational Responsibilities</strong></p><br><ul><li>Ensure that all HQ teams meet operational and training standards with assistance from the training team and that the team is fully compliant with Control Risks Standard Operating Procedures (SOPs).</li><li>Ensure the teams display client etiquette, discipline and Control Risks’ low-profile approach whilst maintaining a high standard of team presentation.</li><li>Responsible for the professional delivery of operational briefs to both Armed Protection Teams (APTs) and client staff when appropriate. </li><li>Understanding of Iraq’s geo-political landscape and Control Risks’ wider operations.</li><li>Assist in the conduct of risk assessments and operational planning.</li><li>Conduct venue and route surveys, security reviews and be able to produce bespoke reports.</li><li>Plan and execute tasks to remote areas and locations outside normal area of operations.</li><li>Provide cover to the project armed protection team contingent as and when required. </li></ul><p><strong>Management Responsibilities</strong></p><br><ul><li>To conduct certifiable instruction in all relevant operational and medical team requirements in accordance with current Control Risks training directives, both to HQ teams as well as client dedicated teams.</li><li>Responsible for deputising in the absence of Ops Manager Baghdad and Baghdad Security Manager, assisting with the coordination of all operational activity within the region ensuring business continuity to the operations department.</li><li>Work closely with the operational management team to assist with the delivery of regional operational activities as required, including APT QA/QCs, by the organisational quality management system.</li><li>Work closely with the operational management team and regional departments to assists with all new commercial team mobilisations in support of operational requirements</li><li>To ensure that the HQ and Baghdad based dedicated teams conducts effective administration to include vehicle maintenance, equipment husbandry / accountability and reports and return.</li><li>Assist and oversee with the management of temporary staff and all IN HR administration.</li><li>Responsible for the oversight and enforcements of HSE standards across HQ and Baghdad based dedicated teams. </li></ul> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><strong>Job Purpose:</strong></p><br><p>The commercial Team Leader (TL) supports and assists the Operations Manager, Baghdad in the day-to-day management of region-wide commercial operations and specified projects. The commercial TL has a major impact on how potential clients assess the capabilities of Control Risks and as such is responsible for setting and maintaining the highest standards of team presentation and capability. The commercial TL will be supporting an international client base that spans across oil and gas, humanitarian, infrastructure, diplomatic and financial services sectors amongst others.</p><br><p><strong>Role tasks and responsibilities:</strong></p><br><p><strong>Operational Responsibilities </strong></p><br><ul><li>Ensure that all HQ teams meet operational and training standards with assistance from the training team and that the team is fully compliant with Control Risks Standard Operating Procedures (SOPs). </li><li>Ensure the teams display client etiquette, discipline and Control Risks’ low-profile approach whilst maintaining a high standard of team presentation.</li><li>Responsible for the professional delivery of operational briefs to both Armed Protection Teams (APTs) and client staff when appropriate.</li><li>Understanding of Iraq’s geo-political landscape and Control Risks’ wider operations.</li><li>Assist in the conduct of risk assessments and operational planning.</li><li>Conduct venue and route surveys, security reviews and be able to produce bespoke reports.</li><li>Plan and execute tasks to remote areas and locations outside normal area of operations.</li><li>Provide cover to the project armed protection team contingent as and when required.</li></ul><p><strong>Management Responsibilities</strong></p><br><ul><li>To conduct certifiable instruction in all relevant operational and medical team requirements in accordance with current Control Risks training directives, both to HQ teams as well as client dedicated teams.</li><li>Responsible for deputizing in the absence of Ops Manager Baghdad and Baghdad Security Manager, assisting with the coordination of all operational activity within the region ensuring business continuity to the operations department.</li><li>Work closely with the operational management team to assist with the delivery of regional operational activities as required, including APT QA/QCs, by the organizational quality management system.</li><li>Work closely with the operational management team and regional departments to assists with all new commercial team mobilizations in support of operational requirements.</li><li>To ensure that the HQ and Baghdad based dedicated teams conducts effective administration to include vehicle maintenance, equipment husbandry / accountability and reports and return.</li><li>Assist and oversee with the management of temporary staff and all IN HR administration.</li><li>Responsible for the oversight and enforcements of HSE standards across HQ and Baghdad based dedicated teams.</li></ul><p>Applications will be closed tomorrow, 03 July 2026</p><br><p>Potential start date: mid July 2026</p><br><p>Rotation: 8 weeks on / 4 weeks off</p><br><p>Salary: To be discussed on the next stage of recruitment</p><br> </div>

<p>Install, maintain, troubleshoot, and repair heavy industrial electrical systems. Ensure safe and reliable operation of electrical equipment. Support preventive maintenance, breakdown maintenance, and commissioning activities.</p><p>Install, inspect, troubleshoot, and repair heavy electrical systems. Perform preventive and corrective maintenance of industrial equipment. Diagnose faults in motors, transformers, generators, MCCs, and switchgear. Carry out cable laying, termination, and panel wiring. Test electrical equipment using appropriate measuring instruments. Replace faulty electrical components and restore equipment operation. Support commissioning and startup activities. Maintain maintenance records and inspection reports. Ensure compliance with electrical safety standards and LOTO procedures. Coordinate with mechanical and production teams to minimize downtime. Maintain housekeeping and cleanliness of electrical panels and work areas. Report equipment abnormalities promptly.</p><p><strong>Desired Candidate Profile</strong></p><p>Minimum 10th Pass with ITI/Diploma in Electrician, Electrical Maintenance, or Electrical Mechanic. 3 5 years of experience in heavy industrial electrical maintenance. Knowledge of AC/DC motors, transformers, generators, MCCs, switchgear, and control panels. Ability to read electrical drawings and schematics. Familiarity with multimeter, clamp meter, megger, and insulation tester. Understanding of preventive and breakdown maintenance. Basic PLC knowledge is an advantage. Knowledge of LOTO procedures and electrical safety standards.</p>

<p><h4>Duties</h4> <p>Responsible for maintaining a safe workplace and ensuring that safety is the highest priority in the workplace.<br> Comply with all environmental health and safety and quality assurance requirements and goals.<br> Provide information and materials to these divisions as necessary to ensure adequate and legal documentation.<br> Ensure data accuracy and update of equipment inventory database.<br> Ensure that related data related to activities meet the requirements.<br> Process excess documentation for all controlled and non-controlled excess equipment and materials.<br> Review, reconcile, adjust, and process all inventory transactions.<br> Process and coordinate equipment transfers.<br> Assist in a broad scope of direct and indirect support activities involving customer owned equipment as necessary to complete assigned tasks.<br> Conduct daily inspections of assigned equipment and immediately report defects or maintenance requirements.<br> Assist with scrap metal processing and preparation for disposal or recycling.<br> Assist in contingency waste removal operations during emergencies, special events, or increased operational requirements.<br> Perform additional duties and projects assigned.</p> <h4>Required</h4> <p>Minimum acceptable experience level: minimum 4 or more years’ experience handling waste management and disposal activity.<br> Previous experience in waste management, sanitation, logistics, construction support, or material handling preferred.<br> Ability to operate or learn disposal collection equipment and material handling equipment.<br> Ability to communicate effectively with supervisors and team members.</p> <h4>Knowledge, Skills, and Abilities</h4> <ul> <li>Prior proven experience in property disposal operations with defense reutilization.</li> <li>Experience operating heavy equipment to include up to a 30K forklift, extended reach forklift, material handler, grappler (excavator), front end loader, and material shredders.</li> <li>Experience with cutting torches to include plasma cutters.</li> <li>Commitment to maintaining a high-performance team which delivers customer service excellence.</li> <li>Knowledge of principles and processes involved in supporting contract responsibilities at an overseas facility.</li> <li>Ability to work in a fast-paced environment requiring handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules.</li> <li>Cross-cultural sensitivity with an international perspective.</li> <li>Excellent organizational and time management skills.</li> <li>Computer skills, specifically in Microsoft Word and Excel.</li> <li>Ability to become an active and functioning member of a team.</li> <li>Ability to be innovative and be an agent for change.</li> <li>Ability to prioritize multiple tasks in a fast-paced operational environment.</li> <li>Basic recordkeeping and reporting skills.</li> </ul> <h4>Physical Requirements</h4> <ul> <li>Frequently lift and carry materials weighing up to 25 kg.</li> <li>Stand, walk, bend, climb, kneel, and work for extended periods.</li> <li>Operate manual and powered equipment safely.</li> <li>Work in dusty, noisy, and outdoor environments.</li> <li>Wear required PPE, including safety boots, gloves, eye protection, hearing protection, and reflective clothing.</li> </ul> <h4>Working Conditions</h4> <ul> <li>Outdoor and industrial work environment.</li> <li>Exposure to heat, dust, noise, and moving equipment.</li> <li>May be required to work overtime, weekends, holidays, or emergency callouts to support mission requirements.</li> </ul> <h4>Performance Expectations</h4> <ul> <li>Complete disposal operations safely, efficiently, and on schedule.</li> <li>Maintain high standards of cleanliness throughout assigned work areas.</li> <li>Ensure waste is properly segregated and disposed of in accordance with environmental requirements.</li> <li>Demonstrate reliability, professionalism, accountability, and teamwork while supporting mission operations.</li> </ul> <h4>Education</h4> <p>A high school diploma or GED (General Education Diploma). Certifications or 4 years’ substitute experience in waste management and disposal services will be acceptable.<br> Valid Iraqi driver’s license (if operating company vehicles).</p> <h4>Security Vetting</h4> <p>Already possess a RSO issued security clearance or be able to obtain a favorable RSO issued clearance prior to being hired is required for the position. Must maintain eligibility at the required certification or clearance level for the duration of the contract.</p> <h4>Language Skills</h4> <p>Satisfactory English and Arabic proficiency to meet job requirements and to adhere and comply with safety, health, and security measures.</p> <h4>Medical</h4> <p>Successfully complete and pass the medical and drug examinations as required by the company and our customer for deployment to Iraq. Must maintain physical and drug requirements for duration of deployment.</p> <h4>Desired</h4> <ul> <li>Previous out of home country experience and previous work experience in harsh environmental conditions are a plus.</li> <li>Experience supporting Department of State.</li> <li>Experience working with the company.</li> </ul> <h4>Other Knowledge, Skills, and Abilities</h4> <ul> <li>Knowledge of the principles and processes involved in quality control management.</li> <li>Successful management of multiple sites in geographically dispersed locations.</li> <li>Ability to collect, analyze, and summarize data and to prepare clear and concise reports.</li> <li>Experience in effectively dealing with international and headquarters staff, and sensitivity to other cultures.</li> <li>Exercise sound judgment and make decisions independently.</li> <li>Excellent organizational and time management skills, with the ability to handle multiple tasks and administrative details in a fast paced and constantly changing environment.</li> <li>Expert communication skills to facilitate and disseminate information.</li> </ul> <h4>Working and Living Conditions</h4> <p>This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environment. Temperatures can reach 120-130 degrees Fahrenheit/50-55 degrees Celsius during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to Iraq for extended periods. Work schedules are a minimum of 6 days per week and 10 hours per day, while some jobs have higher daily and weekly minimums. Employees must be willing and able to perform physical activities including, but not limited to, heavy lifting and moving of items, parts, assemblies, and equipment up to the safety regulation maximum; climbing in and out of equipment; crawling; and working outdoors. This includes being able to lift and carry 40 pounds of personal protective equipment for extended periods of time and being capable of running and ‘duck & cover’ during emergencies without putting oneself or others at risk.</p></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span> <span></span></span><p>We are looking for the right people — people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world’s largest providers of products and services to the global energy industry.</p><br><b>Job Duties</b> <br><p>Under broad direction, as a subject matter expert:</p><br> <ul> <li>Performs preventive/predictive maintenance and repair of a variety of mechanical equipment relative to their assigned location.&nbsp;</li> <li>Assists in supervising other technicians and prioritizes and/or assigns work when needed.</li> <li>Possesses advanced diagnostic/troubleshooting knowledge and skills.</li> <li>Performs advanced function testing to verify equipment readiness after maintenance.</li> <li>Must be proficient in understanding/interpreting mechanical schematics/drawings/prints.</li> <li>Ability to identify correct parts and locate them in a system search to enable accurate procurement of spares.</li> <li>Ensures adherence, accurate input, and maintenance of data into Halliburton's system of record.</li> <li>This role is responsible for following specific and detailed work processes within the Halliburton Management System (HMS) during daily job activities.</li> <li>Responsible for mentoring junior technicians.</li> <li>Responsible for ensuring duties are performed in a safe, efficient, and effective manner. Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations.</li> <li>Consequences of error are easily measured and can be confined.</li> </ul> <p><strong>Additional Role Responsibilities:</strong></p><br> <p>(1). Provide the professional technical Support for static equipment and facilities operation and maintenance services;&nbsp;<br>(2). Conducts detailed technical evaluations to address issues with equipment and system design, operation and maintenance;&nbsp;<br>(3). Provides pertinent engineering expertise to Root Cause Failure Analysis;&nbsp;<br>(4).Review and approval of mechanical data sheets of static equipment&nbsp;<br>(5).Reviews affiliate, project and contractor deliverables as requested to ensure compliance with project specifications, Design Practices, Static Equipment Toolkit guidance, and best practices. Documents to be reviewed may include Piping &amp; Instrument Diagrams, equipment arrangements, equipment specifications, data sheets, vendor proposals, and technical studies;&nbsp;<br>(6).Participates in design reviews, risk assessments, HAZOPs, vendor qualification, and vendor bid evaluations as requested;&nbsp;<br>(7).Supports functional initiatives and maintains discipline documentation pertinent to Upstream Facilities;&nbsp;<br>(8).Provides technical mentorship to less experienced engineers with emphasis on areas of identified skill gaps;&nbsp;<br>(9).Proactively and continuously grows disciplines technical expertise in pertinent technologies.&nbsp;<br>(10).Maintains current knowledge (e.g. through participation in industry conferences / forums).&nbsp;</p><br> <br><br><b>Qualifications</b> <br><p>A high school diploma or equivalent and 5 years of experience in related mechanical fields are required. A technical school certification is preferred.</p><br> <p><br><strong>Preferred Experience:</strong><br>Minimum of 10-years relevant experience in their discipline or in an operations environment within the oil &amp; gas industry.&nbsp;</p><br><br><br><br><p><strong>Halliburton is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation</strong>.</p><br> <p><strong><u>Location</u></strong></p><br> <p>Oils Opertion ST,N°29 Burjesia,&nbsp;Basra,&nbsp;Basrah,&nbsp;61006, Iraq</p><br> <p><strong><u>Job Details</u></strong></p><br> <p><strong>Requisition Number:</strong>&nbsp;211593&nbsp;&nbsp;<br><strong>Experience Level:&nbsp;</strong>Experienced Hire&nbsp;<br><strong>Job Family:</strong>&nbsp;Support Services&nbsp;<br><strong>Product Service Line:&nbsp;</strong>Halliburton Project Management&nbsp;&nbsp;&nbsp;<br><strong>Full Time / Part Time:&nbsp;</strong>Full Time</p><br> <p><strong>Additional Locations for this position:&nbsp;</strong></p><br> <p><u><strong>Compensation Information</strong></u><br>Compensation is competitive and commensurate with experience.</p><br> </div>