Equipment operator Jobs

<p>The Chief Engineer will be based at one of the Amentum sites in Iraq and serve the Operations and Maintenance Support Services (OMSS) contract in support of the U.S. Department of State.</p><p>The Chief Engineer is responsible for all water purification, water storage, water distribution and wastewater treatments, as well as generators, and associated power generation, transmission and distribution equipment.</p><p>The Chief Engineer is also responsible for the safe operation and maintenance of power plants, generators, compressors, air conditioning systems, etc., and operates industrial machinery and equipment in various forms.</p><p>The duties and responsibilities listed are representative of the nature and level of work assigned and are not necessarily all inclusive.</p><p><b><br></b></p><p><b>DUTIES:</b></p><ul><li>Responsible for maintaining a safe workplace and ensuring safety is the highest priority in the workplace.</li><li>Comply with all Environmental &amp; Safety and Quality Assurance requirements and goals.</li><li>Provide information and materials to these divisions as necessary to ensure adequate and legal documentation.</li><li>Responsible for managing, monitoring and tracking physical plant and building operations services.</li><li>Supervise and oversee the operations of the water and wastewater treatment plants to include all water quality laboratory, pumping, filtering, piping and control systems.</li><li>Ensure the viability, availability and safety of water treatment and waste distribution systems.</li><li>Maintain water well operations and water storage systems.</li><li>Manage water treatment waste stream to contractual standards.</li><li>Oversee the: Prime power and water/wastewater treatment programs; Operation, calibration, diagnostics, troubleshooting and repairs to all mechanical, electrical equipment systems and electrical/pneumatic control systems.</li><li>Preventative maintenance, condition monitoring, repair, installation and modernization of all power generation, transmission and distribution equipment on site; and Support of prime power generators made by Caterpillar, Cummins, Perkins, FG Wilson and other manufacturers, with outputs ranging from 20KW up to 160KW.</li><li>Provide daily guidance and direction to supervisors, operators, mechanics and technicians.</li><li>Perform scheduled and unscheduled inspections.</li><li>Report any malfunctions or lack of compliance with SOW to the Chief Engineer.</li><li>Assist in developing the SOW when requested, including diagrams and specifications in compliance with Overseas Building Operations (OBO), Environmental Protection Agency (EPA), Occupational Safety and Health Administration (OSHA) and National electric Code (NEC) standards.</li><li>Maintain effective, timely and respectful communication and interaction with other employees and managers and support other organizations.</li><li>Perform administrative tasks including ordering material, inventorying and scheduling work.</li><li>Manage logistics, stock levels and workflow processes.</li><li>Collect, analyze and summarize data for report preparation and submit written reports.</li><li>Maintain appropriate technical library and record keeping, which documents all procedures necessary to accomplish assigned responsibilities.</li><li>Responsible for facility custodianship of work area and management of tools, equipment and spare parts.</li><li>Take initiative to analyze situations and make frequent technical decisions based on specifications, safety and electrical codes.</li><li>Evaluate operational effectiveness and develop/maintain effective operational control mechanisms.</li><li>Responsible for allocating and managing staff resources according to changing needs</li><li>Identify problem areas and respond to mission requirements to perform task order requirements.</li><li>Plan and manage projects.</li><li>Control resources; monitor staff proficiency and qualifications; monitor the locations and activities of assets; and coordinate the flow of information to and from O&amp;M staff and USG representatives.</li><li>Resolve physical plant and building operations issues.</li><li>Provide professional engineering guidance for all future work and technical proposals and will be responsible for drafting and presenting reports and analysis of system performance and recommendations for improvement.</li><li>Interpret all architectural, civil, structural, mechanical, electrical, plumbing, and fire system diagrams or drawings for large facilities.</li><li>Continually interface with Department of State Facility Management personnel in order to coordinate the work being completed on the equipment systems within the Utilities section and brief the customer during meetings and site surveys.</li><li>Perform additional duties and projects as assigned.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><br></li></ul>

<p>The Horizontal Foreman will be based at Baghdad Embassy Compound (BEC) Amentum site in Iraq and serve the Operations and Maintenance Support Services (OMSS) contract in support of the U.S. Department of State. This position will be responsible for managing the daily work assignments of Material Handling and Heavy Equipment Operations and will report to the Operations and Maintenance Manager.</p><p>The duties and responsibilities listed below are representative of the nature and level of work assigned and are not necessarily all inclusive.</p><p>DUTIES:</p><ul><li>Responsible for maintaining a safe workplace and ensuring that safety is the highest priority in the workplace.</li><li>Comply with all Environmental Health &amp; Safety and Quality Assurance requirements and goals.</li><li>Provide information and materials to these divisions as necessary to ensure adequate and legal documentation.</li><li>Provide oversight of all material handling and heavy equipment support operations.</li><li>Primary responsibilities will be the safety and professional operations of a daily multi-national workforce and ensuring that all work requests are completed.</li><li>Schedule daily work assignments of personnel.</li><li>Review work orders and support requests to determine safety requirements, permitting, and equipment needs.</li><li>Manage all work order activity to ensure that all work is properly documented and submitted for recording.</li><li>Provide reports and data - both required and ad hoc.</li><li>Ensure adequate supplies and materials are ordered for department.</li><li>Ensure personnel are properly trained in equipment operation.</li><li>Monitor and evaluate performance of personnel.</li><li>Perform additional duties and projects as assigned.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Minimum Acceptable Experience Level: Two (2) years experience with Horizontal Earthwork and Material Handling Equipment including forklifts, cranes, loaders, bulldozers, skid steers, and semi-tractor trucks.</li><li>Knowledge, Skills, and Abilities:<ul><li>Good time management skills and able to multi-task using various types of cranes and rigging gear.</li><li>Knowledge of proper loading techniques and forklift weight capacities.</li><li>Ability to lift up to 30 pounds, bend, stoop, and climb in and around construction type equipment and work in adverse climatic conditions.</li><li>Ability to coordinate and complete basic Transportation Movement Request (TMR).</li><li>Prior experience in working with a multi-national workforce</li><li>Ability to extract information to produce reports.</li><li>Ability to communicate with a wide variety of colleagues and customers.</li><li>Knowledge of principles and processes involved in supporting contract responsibilities at an overseas facility.</li><li>Ability to work in a fast-paced environment that requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules.</li><li>Cross-cultural sensitivity with an international perspective.</li><li>Excellent organizational and time management skills.</li><li>Computer skills, specifically in Microsoft Word and Excel.</li><li>Ability to become an active and functioning member of a team.</li><li>Ability to be innovative and be an agent for change.</li><li>Expert communication skills to facilitate and disseminate information.</li></ul></li><li>Education: A high school diploma or GED.</li><li>Passport, Licenses and Certifications: As part of pre-contingency requirements, by the time the visa process starts , candidates must possess a valid passport with a minimum of 18 months remaining to expiration date with 8 blank pages.</li><li>Valid drivers license from Home of Record.</li><li>Security Vetting: Already possess a US Government issued security clearance or Moderate Risk Public Trust (MRPT) or be able to obtain a favorable MRPT certification or US Government clearance prior to being hired is required for the position. Must maintain eligibility at the required certification or clearance level for the duration of the contract.</li><li>Language Skills: Satisfactory English proficiency to meet job requirements and to adhere and comply with safety, health, and security measures.</li><li>Medical: Successfully complete and pass the medical and dental examinations as required by Amentum and our customer for deployment to Iraq. Must maintain physical and dental requirements for duration of deployment.</li><li>Relevant overseas contract experience.</li><li>Previous work experience in harsh environmental conditions are a plus.</li><li>Experience working with Amentum.</li></ul>

<p><h4>Duties</h4> <p>Responsible for maintaining a safe workplace and ensuring that safety is the highest priority in the workplace.</p> <p>Comply with all Environmental Health & Safety and Quality Assurance requirements and goals.</p> <p>Provide information and materials to these divisions as necessary to ensure adequate and legal documentation.</p> <p>Ensure data accuracy and update of equipment inventory database.</p> <p>Ensure that related data processing activities meet the requirements.</p> <p>Process excess turn-in documentation for all controlled and non-controlled excess equipment and materials.</p> <p>Review, reconcile, adjust and process all inventory transactions.</p> <p>Process Survey Reports for all missing equipment.</p> <p>Process and coordinate equipment transfers.</p> <p>Perform positive verbal and written communication skills with all internal and external customers.</p> <p>Assist in a broad scope of direct and indirect support activities involving customer owned equipment as necessary to complete assigned tasks.</p> <p>Perform additional duties and projects as assigned.</p> <h4>Required</h4> <p><strong>Minimum acceptable experience level:</strong> Minimum of 3 years’ experience supporting a DOD or DOS program exposure, at least two (2) years’ of international experience.</p> <p><strong>Knowledge, skills, and abilities:</strong></p> <ul> <li>Prior proven experience in property disposal operations with Defense Reutilization Management Operations (DRMO), Hazmat experience.</li> <li>Experience operating heavy equipment to include up to a 30K forklift, extended reach forklift, material handler, grappler (excavator), front end loader and material shredders.</li> <li>Experience with cutting torches to include plasma cutters.</li> <li>Commitment to maintaining a high performance team which delivers customer service excellence.</li> <li>Knowledge of principles and processes involved in supporting contract responsibilities at an overseas facility.</li> <li>Ability to work in a fast-paced environment that requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules.</li> <li>Cross-cultural sensitivity with an international perspective.</li> <li>Excellent organizational and time management skills.</li> <li>Computer skills, specifically in Microsoft Word and Excel.</li> <li>Ability to become an active and functioning member of a team.</li> <li>Ability to be innovative and be an agent for change.</li> <li>Expert communication skills to facilitate and disseminate information.</li> </ul> <p><strong>Education:</strong> A high school diploma or GED (General Education Diploma).</p> <p><strong>Passport, licenses and certifications:</strong></p> <ul> <li>As part of pre-contingency requirements, by the time the visa process starts, candidates must possess a valid passport with a minimum of 18 months remaining to expiration date with 8 blank pages.</li> <li>Valid drivers’ license.</li> </ul> <p><strong>Security vetting:</strong> Already possess a US Government issued security clearance or be able to obtain a favorable US Government clearance prior to being hired is required for the position. Must maintain eligibility at the required certification or clearance level for the duration of the contract.</p> <p><strong>Language skills:</strong> Satisfactory English proficiency to meet job requirements and to adhere and comply with safety, health, and security measures.</p> <p><strong>Medical:</strong> Successfully complete and pass the medical and drug examinations as required by the employer and customer for deployment to Iraq. Must maintain physical and drug requirements for duration of deployment.</p> <h4>Desired</h4> <ul> <li>Previous out of home country experience and previous work experience in harsh environmental conditions are a plus.</li> <li>Department of State experience.</li> <li>Five to seven years’ of international experience in challenging locations, preferably working in the Middle East, with a working knowledge of customs and cultural differences.</li> <li>Experience working with the employer.</li> </ul> <h4>Other knowledge, skills and abilities</h4> <ul> <li>Knowledge of the principles and processes involved in Quality Control Management.</li> <li>Successful management of multiple sites in geographically dispersed locations.</li> <li>Ability to collect, analyze and summarize data and to prepare clear and concise reports.</li> <li>Experience in effectively dealing with international and headquarters staff, and sensitivity to other cultures.</li> <li>Exercise sound judgment and make decisions independently.</li> <li>Excellent organizational and time management skills, with the ability to handle multiple tasks and administrative details in a fast paced and constantly changing environment.</li> <li>Expert communication skills to facilitate and disseminate information.</li> </ul></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Job Description: Maintenance Supervisor – Water Cup Production Line Department: Engineering and Maintenance Industry: Packaged Water / Water Cup Manufacturing Employment Type: Full-time Number of Vacancies: 1 Reports To: Factory Manager / Operations Manager Direct Reports: Senior Maintenance Technicians and Mechanical Maintenance Technicians Preferred Nationality: Indian/Iranian Job Purpose Lead the maintenance function for high-speed thermoforming/Form-Fill-Seal water cup production lines.<br> The Maintenance Supervisor will develop maintenance plans, manage the technical team, respond hands-on to major breakdowns, improve machine reliability, and ensure critical spare parts are available.<br> Key Responsibilities Prepare daily, weekly, monthly, quarterly, preventive, and shutdown maintenance plans.<br> Assign maintenance activities and supervise their safe, timely completion.<br> Lead troubleshooting during major breakdowns and recurring machine failures.<br> Conduct root-cause analysis and implement permanent corrective actions.<br> Reduce unplanned downtime and improve equipment reliability and availability.<br> Coordinate maintenance schedules and machine interventions with production.<br> Prepare maintenance checklists, SOPs, equipment histories, and technical reports.<br> Monitor equipment condition and recommend repairs, overhauls, or replacements.<br> Develop critical spare-parts lists for the complete production line.<br> Forecast spare-parts requirements and establish minimum and maximum stock levels.<br> Monitor spare-parts consumption, failure frequency, and component service life.<br> Prepare accurate technical specifications for purchasing spare parts and services.<br> Evaluate the technical suitability of proposed replacement components.<br> Train senior technicians, mechanical technicians, and selected production employees.<br> Ensure compliance with safety, food-hygiene, and lockout/tagout requirements.<br> Maintain proper housekeeping and tool control during maintenance activities.<br> Required Technical Experience Candidates must have direct, hands-on experience maintaining thermoforming/FFS machines that form, fill, and seal water cups, including: Plastic-film feeding, tracking, and tension control Heating and thermoforming stations Forming molds, vacuum systems, and cooling arrangements Water-filling mechanisms, nozzles, pumps, and volume adjustment Lid-film feeding and alignment systems Heat-sealing temperature, pressure, and timing control Cutting, punching, and cup-discharge systems Pneumatic cylinders, valves, regulators, and air preparation Bearings, chains, sprockets, timing belts, shafts, and gearboxes Linear guides, conveyors, lubrication systems, and machine alignment Mechanical synchronization of high-speed production equipment Experience with Thermonox, Beta-Pak, or technically similar high-speed machines is strongly preferred.<br> Required Qualifications Diploma or bachelor’s degree in Mechanical Engineering, Mechatronics, Industrial Maintenance, or a related discipline.<br> Minimum 7–10 years of relevant maintenance experience.<br> Demonstrated supervisory experience in a production environment.<br> Strong mechanical troubleshooting and root-cause-analysis ability.<br> Ability to prepare preventive maintenance plans, SOPs, checklists, and reports.<br> Working knowledge of maintenance KPIs, downtime analysis, and spare-parts control.<br> Ability to read mechanical drawings, manuals, parts diagrams, and specifications.<br> Willingness to work hands-on and respond to breakdowns outside normal hours when required.<br> Critical Selection Requirement General maintenance experience alone is not sufficient.<br> Candidates whose experience is limited to bottled-water filling lines, RO plants, automotive maintenance, building maintenance, utilities, or unrelated factory equipment will not qualify unless they also have substantial direct experience with thermoform/FFS water cup production machines.<br></span> </div>

<p>Reading blueprints and drawings and taking measurements to plan layout and procedures. Determining the appropriate welding equipment or method based on requirements. Setting up components for welding according to specifications.</p><p><strong>Desired Candidate Profile</strong></p>Reading blueprints and drawings and taking measurements to plan layout and procedures. Determining the appropriate welding equipment or method based on requirements. Setting up components for welding according to specifications.

<p>The Mechanical & Hydraulic Technician (GSE) is responsible for carrying out preventive, corrective, and emergency maintenance on all Ground Support Equipment used in airport operations. This includes diesel engines, transmissions, hydraulic pumps, cylinders, hoses, valves, braking systems, chassis components, and all mechanical/hydraulic assemblies. The role ensures that GSE units remain safe, reliable, and operational to support continuous aircraft ground handling. Performs preventive and corrective maintenance on mechanical and hydraulic systems for all GSE, including: • Pushback tractors • Belt loaders • Baggage tractors • High-lift catering trucks • Lavatory/water service trucks • Ground Power Units (GPU – mechanical side) • Air Start Units (ASU – mechanical/hydraulic side) • Passenger stairs • All hydraulic-driven and mechanical-driven GSE Mechanical Maintenance Tasks • Engine repair and overhaul (diesel & gasoline) • Transmission repair (manual/automatic) • Cooling system service (radiators, hoses, thermostats) • Brake system service (air, hydraulic, mechanical) • Suspension & steering system repairs • Lubrication, oil/filter changes, belt replacement • Structural inspections (welding cracks, chassis damage) Hydraulic Maintenance Tasks • Hydraulic pump repair and replacement • Hydraulic cylinder rebuilding (seals, rods, pistons) • Valve block service and troubleshooting • Hose replacement, fitting installation, and leak rectification • System pressure testing and flow measurement • Hydraulic fluid flushing, bleeding, and contamination control Diagnostics & Technical Reporting • Uses mechanical and hydraulic diagnostic equipment • Identifies mechanical/hydraulic faults and root causes • Reads and interprets service manuals, diagrams, hydraulic schematics • Completes work orders, checklists, and maintenance reports accurately</p><p>A hands-on technician with 2-4 years of experience in heavy equipment, GSE, or hydraulic systems, capable of independently diagnosing and repairing mechanical and hydraulic faults, performing preventive maintenance, reading technical manuals, and ensuring GSE equipment remains safe, reliable, and operational in an airport environment. Education: Diploma in Mechanical Engineering Technology, Automotive Maintenance, or Hydraulic Systems. Experience: 2–4 years of experience in GSE, heavy vehicles, industrial machinery, or hydraulic systems, Strong understanding of engine, hydraulic, and mechanical systems, Airport GSE experience is desirable. Training Requirements: Mechanical & Hydraulic Systems Maintenance, Diesel Engine Repair Training, Hydraulic Troubleshooting. Computer Skills: MS office Language Skills (Eng., Arabic, other): Arabic and English Behavioral Competencies • Delivering Results & Fostering Ownership • Building Customer Value • Networking & Influencing Collaboratively • Leading Teams • Driving Change Technical Competencies • Diagnostic & Troubleshooting Techniques • Preventive & Corrective Maintenance • GSE Maintenance • Hydraulic and Mechanical Systems • Technical Reporting and Documentation</p>

<p>The Mechanical & Hydraulic Technician (GSE) is responsible for carrying out preventive, corrective, and emergency maintenance on all Ground Support Equipment used in airport operations. This includes diesel engines, transmissions, hydraulic pumps, cylinders, hoses, valves, braking systems, chassis components, and all mechanical/hydraulic assemblies. The role ensures that GSE units remain safe, reliable, and operational to support continuous aircraft ground handling. Performs preventive and corrective maintenance on mechanical and hydraulic systems for all GSE, including: • Pushback tractors • Belt loaders • Baggage tractors • High-lift catering trucks • Lavatory/water service trucks • Ground Power Units (GPU – mechanical side) • Air Start Units (ASU – mechanical/hydraulic side) • Passenger stairs • All hydraulic-driven and mechanical-driven GSE Mechanical Maintenance Tasks • Engine repair and overhaul (diesel & gasoline) • Transmission repair (manual/automatic) • Cooling system service (radiators, hoses, thermostats) • Brake system service (air, hydraulic, mechanical) • Suspension & steering system repairs • Lubrication, oil/filter changes, belt replacement • Structural inspections (welding cracks, chassis damage) Hydraulic Maintenance Tasks • Hydraulic pump repair and replacement • Hydraulic cylinder rebuilding (seals, rods, pistons) • Valve block service and troubleshooting • Hose replacement, fitting installation, and leak rectification • System pressure testing and flow measurement • Hydraulic fluid flushing, bleeding, and contamination control Diagnostics & Technical Reporting • Uses mechanical and hydraulic diagnostic equipment • Identifies mechanical/hydraulic faults and root causes • Reads and interprets service manuals, diagrams, hydraulic schematics • Completes work orders, checklists, and maintenance reports accurately</p><p>A hands-on technician with 2-4 years of experience in heavy equipment, GSE, or hydraulic systems, capable of independently diagnosing and repairing mechanical and hydraulic faults, performing preventive maintenance, reading technical manuals, and ensuring GSE equipment remains safe, reliable, and operational in an airport environment. Education: Diploma in Mechanical Engineering Technology, Automotive Maintenance, or Hydraulic Systems. Experience: 2–4 years of experience in GSE, heavy vehicles, industrial machinery, or hydraulic systems, Strong understanding of engine, hydraulic, and mechanical systems, Airport GSE experience is desirable. Training Requirements: Mechanical & Hydraulic Systems Maintenance, Diesel Engine Repair Training, Hydraulic Troubleshooting. Computer Skills: MS office Language Skills (Eng., Arabic, other): Arabic and English Behavioral Competencies • Delivering Results & Fostering Ownership • Building Customer Value • Networking & Influencing Collaboratively • Leading Teams • Driving Change Technical Competencies • Diagnostic & Troubleshooting Techniques • Preventive & Corrective Maintenance • GSE Maintenance • Hydraulic and Mechanical Systems • Technical Reporting and Documentation</p>

<p><h4>Job Description</h4> <p>The computer systems analyst I provides several phases of the required systems analysis where the nature of the system is predetermined, uses established fact-finding approaches, knowledge of pertinent work processes and procedures, and familiarity with related computer programming practices, system software, and computer equipment.</p> <p>This analyst provides several phases of the required systems analysis where the nature of the system is predetermined, uses established fact-finding approaches, knowledge of pertinent work processes and procedures, and familiarity with related computer programming practices, system software, and computer equipment.</p> <p>Carries out fact finding and analyses as assigned, usually of a single activity or a routine problem, and applies established procedures where the nature of the system, feasibility, computer equipment, and programming language have already been decided.</p> <p>May assist a higher-level systems analyst by preparing the detailed specifications required by computer programmers from information developed by the higher-level analyst.</p> <p>May research routine user problems and solve them by modifying the existing system when the solutions follow clear precedents.</p> <p>Prepare cost and deadline estimates as required for review.</p> <p>Works independently to adapt guides to specific situations; resolve problems and deviations according to established practices; and obtain advice where precedents are unclear or not available.</p> <p>Carries out objectives, priorities, and deadlines as defined by the supervisor.</p> <p>May supervise technicians and others who assist in specific assignments.</p> <p>Will have some variation within and across contracts and may list additional or specific job duties related to assigned function or level which are not aforementioned.</p> <h4>Minimum Requirements</h4> <ul> <li>High school diploma or equivalent is required. Certification of education level is required.</li> <li>CompTIA Security+ certification.</li> <li>Must possess two (2) years of related experience in computer systems analysis.</li> <li>Ability to obtain and maintain a US government SECRET clearance is required (prefer active Secret clearance). US citizenship is required for SECRET clearance at this work location.</li> <li>A valid U.S. passport is required to travel internationally. Passport must have a minimum of 6 blank pages and 2 plus year validity on expiration date of passport.</li> <li>Must be able to pass CENTCOM medical requirements for deployment.</li> <li>Must be able to obtain a visa in CENTCOM locations.</li> </ul> <h4>Knowledge & Skills</h4> <ul> <li>Requires competence in most phases of system analysis.</li> <li>Systems analysis and design skills in an area such as a record keeping or scientific operation.</li> <li>Knowledge of pertinent system software and computer equipment.</li> <li>Knowledge of work processes, applicable regulations, and practices of the assigned subject-matter area.</li> <li>Ability to recognize probable interactions of related computer systems and predict impact of a change in assigned system.</li> <li>Good problem-solving skills.</li> <li>Self-motivated and the ability to work independently.</li> </ul> <h4>Physical Requirements / Working Environment</h4> <ul> <li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li> <li>Must be able to lift, push, or pull a minimum of 50 pounds.</li> <li>May work in maintenance shop or outside.</li> <li>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</li> <li>May be exposed to extreme noise from operating equipment.</li> <li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li> <li>May be expected to work in austere environments and all weather conditions.</li> </ul></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Radiology Technician uses specialized X-ray equipment to create images of the body for doctors to diagnose and treat patients. The position is on a Locum rotation, 30 days active and 120 days inactive.</p><p>Key Responsibilities:</p><ul><li>Prepares patients, operates equipment and evaluates X-ray images.</li><li>Documents patient care services by charting in patient and department records.</li><li>Prepares patients for radiological procedure by positioning patient.</li><li>Adjusts immobilization devices, moves equipment into specified positions and modifies equipment controls to set exposure factors.</li><li>Providing explanations of treatment and answering questions for patients.</li><li>Minimizes radiation to patient and staff by practicing radiation protection techniques, using beam restrictive devices, patient shielding and knowledge of exposure factors.</li><li>Adjusts and maintains imaging equipment and ensures it is working properly.</li><li>Protects patients and employees by adhering to infection-control policies and protocols.</li><li>Maintains safe and clean working environment by complying with procedures, rules, and regulations.</li><li>Actively participates in Mass Casualty exercises and events.</li><li>Performance of other duties as assigned.</li></ul><p>Operational responsibilities:</p><ul><li>Assess patient and uses proper patient positioning to obtain optimal images.</li><li>Evaluates previous studies for comparison.</li><li>Performs technical phases of radiographic procedures within the radiology department</li><li>Documents findings in a technologist report.</li><li>Performs procedures while taking precautions against unsafe exposure to patient, self or others.</li><li>Develops digital images, creates, updates and maintains patient data files and ensures transmission of images to consultant radiologists.</li><li>Manages diagnostic evaluation reports.</li><li>Provides written and verbal reports to physicians recognizing cases requiring immediate attention.</li><li>Interfaces with consultant radiologists and manages the operational and fiduciary compliance.</li><li>Interfaces with clinic staff, technical support for regular software upgrades, maintenance and troubleshooting.</li><li>Responsible for imaging patient records, creates and maintains files and preforms audits.</li></ul><p>This list is non-exhaustive, and the role holder may be required to undertake additional duties that are not specifically listed above.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Capable of functioning independently and proven ability in exercising independent judgment.</li><li>Consultation skills, excellent verbal and written communication abilities, public speaking skills, and proficiency with computer system.</li><li>Must be familiar with all standard radiographic procedures.</li><li>Possesses technical ability to obtain optimal images.</li><li>Have fluency in both oral and written English.</li><li>Current experience in direct patient care and must have worked a minimum of 6-months of the last 12-months in career field.</li><li>Maintain continuing education activities.</li><li>Experience with digital acquisition and transmission of images desired.</li><li>Must be certified by the American Registry of Radiologic Technologists (ARRT) or home country equivalent.</li><li>Certified Ultrasound Technician or home country equivalent preferred.</li><li>Must meet pre-deployment physical requirements.</li><li>Work involves sitting and standing for prolonged periods of time.</li><li>May require bending, stooping and lifting to 25 lbs.</li><li>Obtain medical clearance and maintain current immunizations.</li><li>Must be able to relocate to Balad, Iraq.</li><li>A valid passport from country of record is required and must be in your possession prior to relocation.</li><li>You must maintain a current passport during your stay in Balad.</li><li>The incumbent may be required to perform job related tasks other than those specifically presented in this job description.</li><li>This job description is subject to regular review.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Radiology Technician uses specialized X-ray equipment to create images of the body for doctors to diagnose and treat patients. The position is on a Locum rotation, 30 days active and 120 days inactive.</p><p>Key Responsibilities:</p><ul><li>Prepares patients, operates equipment and evaluates X-ray images.</li><li>Documents patient care services by charting in patient and department records.</li><li>Prepares patients for radiological procedure by positioning patient.</li><li>Adjusts immobilization devices, moves equipment into specified positions and modifies equipment controls to set exposure factors.</li><li>Providing explanations of treatment and answering questions for patients.</li><li>Minimizes radiation to patient and staff by practicing radiation protection techniques, using beam restrictive devices, patient shielding and knowledge of exposure factors.</li><li>Adjusts and maintains imaging equipment and ensures it is working properly.</li><li>Protects patients and employees by adhering to infection-control policies and protocols.</li><li>Maintains safe and clean working environment by complying with procedures, rules, and regulations.</li><li>Actively participates in Mass Casualty exercises and events.</li><li>Performance of other duties as assigned.</li></ul><p>Operational responsibilities:</p><ul><li>Assess patient and uses proper patient positioning to obtain optimal images.</li><li>Evaluates previous studies for comparison.</li><li>Performs technical phases of radiographic procedures within the radiology department</li><li>Documents findings in a technologist report.</li><li>Performs procedures while taking precautions against unsafe exposure to patient, self or others.</li><li>Develops digital images, creates, updates and maintains patient data files and ensures transmission of images to consultant radiologists.</li><li>Manages diagnostic evaluation reports.</li><li>Provides written and verbal reports to physicians recognizing cases requiring immediate attention.</li><li>Interfaces with consultant radiologists and manages the operational and fiduciary compliance.</li><li>Interfaces with clinic staff, technical support for regular software upgrades, maintenance and troubleshooting.</li><li>Responsible for imaging patient records, creates and maintains files and preforms audits.</li></ul><p>This list is non-exhaustive, and the role holder may be required to undertake additional duties that are not specifically listed above.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Required Skills and Knowledge:</p><ul><li>Capable of functioning independently and proven ability in exercising independent judgment.</li><li>Consultation skills, excellent verbal and written communication abilities, public speaking skills, and proficiency with computer system.</li><li>Must be familiar with all standard radiographic procedures.</li><li>Possesses technical ability to obtain optimal images.</li><li>Have fluency in both oral and written English.</li></ul><p>Experience Required:</p><ul><li>Current experience in direct patient care and must have worked a minimum of 6-months of the last 12-months in career field.</li><li>Maintain continuing education activities.</li><li>Experience with digital acquisition and transmission of images desired.</li></ul><p>Education Required:</p><ul><li>Must be certified by the American Registry of Radiologic Technologists (ARRT) or home country equivalent.</li><li>Certified Ultrasound Technician or home country equivalent preferred.</li></ul><p>Physical Requirements:</p><ul><li>Must meet pre-deployment physical requirements.</li><li>Work involves sitting and standing for prolonged periods of time.</li><li>May require bending, stooping and lifting to 25 lbs.</li></ul><p>Other Special Qualifications:</p><ul><li>Obtain medical clearance and maintain current immunizations.</li><li>Must be able to relocate to Balad, Iraq.</li><li>A valid passport from country of record is required and must be in your possession prior to relocation.</li><li>You must maintain a current passport during your stay in Balad.</li><li>The incumbent may be required to perform job related tasks other than those specifically presented in this job description.</li><li>This job description is subject to regular review.</li></ul><p></p></section>

<p><h4>Principal accountabilities</h4> <p>Interpret written instructions and specifications.<br> Plan and lay out work to be completed.<br> Use a variety of machinist's hand tools and precision measuring instruments.<br> Set up and operate standard machine tools.<br> Responsible for the shaping of metal parts to close tolerances.<br> Make standard shop computations relating to dimensions of work, tooling, feeds, and speeds of machining.<br> Perform other qualified duties as requested.</p> <h4>Minimum requirements</h4> <p>High school diploma or equivalent.<br> U.S. military technical school or specialized training course is desired, certification of education level.<br> Four (4) or more years’ machinist experience with repair, modification, maintenance, and overhaul of equipment related to individual specialty codes within the past six (6) years.<br> Must be in possession of a valid U.S. passport valid for 2 years and 6 blank pages at the time of hiring and be able to travel internationally.<br> Must be able to obtain and maintain facility Public Trust NAC-I. Note: US citizenship is required for facility Public Trust NAC-I at this work location.<br> Must be able to clear CENTCOM MOD physical requirements for deployment training (will be required to attend CRC (DIDC)).<br> Must be able to obtain Iraq visa.</p> <h4>Knowledge & skills</h4> <p>Knowledge of the working properties of common metals, selecting standard materials, parts, and equipment required for this work.<br> Knowledge of fitting and assembling parts into mechanical equipment.<br> Requires rounded training in machine-shop practice, usually acquired through a formal apprenticeship or equivalent training and experience.</p> <h4>Physical requirements / working environment</h4> <p>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.<br> Must be able to climb stairs, ramps, ladders, and work stands.<br> Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.<br> May be required to lift heavy objects whose weight may exceed 50 pounds.<br> Must be able to type using a standard keyboard to communicate through e-mail and various software applications.<br> Will handle dirty parts and lubricants.<br> Will be required to wear proper personal protective equipment (PPE).<br> Must be able to pass a respirator physical and fit test qualification.<br> May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.<br> Must be able to lift/push/pull minimum of 50 pounds.<br> May work in normal office environment, maintenance shop, or outside.<br> Must be able to work in a shop where the environment is drafty, noisy, and dirty.<br> May be exposed to extreme noise from operating equipment.<br> May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</p> <h4>Compensation details</h4> <p>Not applicable.</p> <p>The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws.</p> <h4>Benefits overview</h4> <p>Our health and welfare benefits are designed to support you and your priorities. Offerings include:</p> <ul> <li>Health, dental, and vision insurance</li> <li>Paid time off and holidays</li> <li>Retirement benefits (including 401(k) matching)</li> <li>Educational reimbursement</li> <li>Parental leave</li> <li>Employee stock purchase plan</li> <li>Tax-saving options</li> <li>Disability and life insurance</li> <li>Pet insurance</li> </ul> <p>Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a collective bargaining agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits.</p> <h4>Original posting</h4> <p>06/17/2026 - Until filled<br> The company anticipates this job requisition will remain open for at least three days, with a closing date no earlier than three days after the original posting. This timeline may change based on business needs.</p> <p>The company is proud to be an equal opportunity employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law.</p></p><p></p>

<p><h4>Company description</h4> <p>Wellington’s largest economy hotel within walking distance to the capital’s largest venues, Takina, Te Papa, TSB and Sky Stadium. This robust hotel offers consistency and efficiency for large groups with generous vibrant Vivant restaurant dining spaces, offering a big buffet breakfast, and a la carte lunch and dinner.</p> <h4>Job description</h4> <p>We are seeking a skilled and detail-oriented CDP Butchery professional to join our meat processing team in Baghdad, Iraq. In this role, you will be responsible for butchering, processing, and preparing high-quality meat products while maintaining the highest standards of food safety and hygiene. You will work efficiently in a fast-paced environment, utilizing specialized equipment and techniques to deliver consistent, quality results that meet our customers' specifications and expectations.</p> <ul> <li>Butcher and process meat products using industry-standard tools and techniques with precision and efficiency</li> <li>Prepare meat cuts according to customer specifications and quality standards</li> <li>Maintain strict food safety and hygiene protocols in compliance with local and international regulations</li> <li>Operate and maintain butchery equipment, ensuring all tools are clean, sharp, and properly sanitized</li> <li>Manage inventory by monitoring stock levels, rotating products using FIFO (First In, First Out) methods, and minimizing waste</li> <li>Organize and maintain a clean, organized workspace that meets health and safety requirements</li> <li>Perform quality control checks on all meat products before packaging and distribution</li> <li>Follow proper handling and storage procedures for all meat products, particularly in cold storage environments</li> <li>Collaborate with team members to meet daily production targets and deadlines</li> <li>Report any equipment malfunctions or food safety concerns to management immediately</li> </ul> <h4>Qualifications</h4> <ul> <li>Proven experience in butchery, meat processing, or a related food production role</li> <li>Strong knowledge of food safety regulations and best practices in meat handling</li> <li>Proficiency with butchery tools, equipment, and machinery (saws, grinders, slicers, etc.)</li> <li>Solid understanding of different meat grades, cuts, and processing techniques</li> <li>Excellent attention to detail and commitment to quality standards</li> <li>Physical stamina and dexterity to perform repetitive tasks in a cold environment</li> <li>Strong time management and organizational skills</li> <li>Ability to work efficiently in a team-oriented environment</li> <li>Preferred: Food handling or food safety certification</li> <li>Preferred: Experience with meat grading systems and classification standards</li> <li>Preferred: Supervisory or mentoring experience in a butchery or food production setting</li> </ul> <h4>Additional information</h4> <p>Our commitment to diversity & inclusion:<br>We are an inclusive company and our ambition is to attract, recruit and promote diverse talent.</p></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br>Company Description<br><br><p>Wellington’s largest economy hotel within walking distance to the capital’s largest venues, Takina, Te Papa, TSB and Sky Stadium. This robust hotel offers consistency and efficiency for large groups with generous vibrant Vivant restaurant dining spaces, offering a big buffet breakfast, and a la carte lunch and dinner.</p><br><br>Job Description<br><br><p>We are seeking a skilled and detail-oriented CDP Butchery professional to join our meat processing team in Baghdad, Iraq. In this role, you will be responsible for butchering, processing, and preparing high-quality meat products while maintaining the highest standards of food safety and hygiene. You will work efficiently in a fast-paced environment, utilizing specialized equipment and techniques to deliver consistent, quality results that meet our customers' specifications and expectations.</p><br><ul><li>Butcher and process meat products using industry-standard tools and techniques with precision and efficiency</li><li>Prepare meat cuts according to customer specifications and quality standards</li><li>Maintain strict food safety and hygiene protocols in compliance with local and international regulations</li><li>Operate and maintain butchery equipment, ensuring all tools are clean, sharp, and properly sanitized</li><li>Manage inventory by monitoring stock levels, rotating products using FIFO (First In, First Out) methods, and minimizing waste</li><li>Organize and maintain a clean, organized workspace that meets health and safety requirements</li><li>Perform quality control checks on all meat products before packaging and distribution</li><li>Follow proper handling and storage procedures for all meat products, particularly in cold storage environments</li><li>Collaborate with team members to meet daily production targets and deadlines</li><li>Report any equipment malfunctions or food safety concerns to management immediately</li></ul><br>Qualifications<br><br><ul><li>Proven experience in butchery, meat processing, or a related food production role</li><li>Strong knowledge of food safety regulations and best practices in meat handling</li><li>Proficiency with butchery tools, equipment, and machinery (saws, grinders, slicers, etc.)</li><li>Solid understanding of different meat grades, cuts, and processing techniques</li><li>Excellent attention to detail and commitment to quality standards</li><li>Physical stamina and dexterity to perform repetitive tasks in a cold environment</li><li>Strong time management and organizational skills</li><li>Ability to work efficiently in a team-oriented environment</li><li>Preferred: Food handling or food safety certification</li><li>Preferred: Experience with meat grading systems and classification standards</li><li>Preferred: Supervisory or mentoring experience in a butchery or food production setting</li></ul><br>Additional Information<br><br><p><strong>Our commitment to Diversity &amp; Inclusion:</strong></p><br><p>We are an inclusive company and our ambition is to attract, recruit and promote diverse talent.<br>&nbsp;</p><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Machinist, Maintenance will fabricate parts and components for equipment or items on fabrication work order and to meet specified or original specification requirements in accordance with applicable equipment technical directives referenced in the Technical Library. Principal Accountabilities Interpret written instructions and specifications. Plan and lay out of work to be completed. Use a variety of machinist's hand tools and precision measuring instruments. Set up and operate standard machine tools. Responsible for the shaping of metal parts to close tolerances. Make standard shop computations relating to dimensions of work, tooling, feeds, and speeds of machining. Perform other qualified duties as requested.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>High school diploma or equivalent.</li><li>U.S. military technical school or specialized training course is desired, certification of education level.</li><li>Four (4) or more years machinist experience with repair, modification, maintenance and overhaul of equipment related to individual specialty codes within the past six (6) years.</li><li>Must be in possession of a Valid U.S. Passport valid for 2 years and 6 blank pages at the time of hiring and be able to travel internationally.</li><li>Must be able to obtain and maintain facility Public Trust NAC-I. "Note: US Citizenship is required for facility Public Trust NAC-I at this work location".</li><li>Must be able to clear CENTCOM MOD Physicals requirements for deployment training (Will be required to attend CRC (DIDC).</li><li>Must be able to obtain Iraq visa.</li></ul><p></p></section>

<p>A mechanical installer uses a set of structures to maintain machinery. The primary responsibilities of this position are assembling, installing, dismantling, troubleshooting, and conducting repairs on machinery. Assisting the mechanical engineer with mechanical design and maintenance tasks. Installing and performing diagnostic tests on mechanical systems. Developing and implementing mechanical maintenance plans to prevent costly equipment breakdowns. Troubleshooting mechanical malfunctions and breakdowns, as well as performing repairs. Documenting processes and maintaining mechanical service records. Monitoring the availability of parts and replenishing supplies. Optimizing mechanical efficiency by adjusting machinery and equipment settings.</p><p><strong>Desired Candidate Profile</strong></p><p><br></p>

<p>Job Specification • Supervise ARFF shift activities and maintain continuous readiness of personnel, vehicles, rescue equipment, communication systems, and firefighting resources. • Ensure the declared aerodrome category protection level is continuously maintained. • Deployment of personnel and resources during aircraft emergencies, structural fires, fuel incidents, medical emergencies, hazardous material incidents, and standby operations. • Function as the initial incident commander during emergencies until the arrival of designated incident commander as per AEP. • Maintain operational discipline, shift supervision, personnel accountability, and compliance with approved operational procedures and safety requirements. • Conduct operational inspections of firefighting vehicles, rescue tools, communication systems, extinguishing agents, PPE, and associated operational equipment. • Oversee implementation of operational drills, practical exercises, shift training activities, and familiarization programmes during assigned duty periods and submit relevant reports to Training Officer. • Ensure operational records, occurrence reports, inspection logs, vehicle checklists, and shift documentation are properly maintained and updated. • Coordinate with ATC, medical services, security agencies, airlines, maintenance departments, and external emergency services during operational activities and emergencies. • Ensure implementation of departmental SOPs, Airport Emergency Plan procedures, operational directives, and regulatory requirements. Human and Technical Resources • Supervise shift personnel deployment and ensure adequate manpower availability for operational response, standby coverage, drills, and routine duties. • Verify competency, operational preparedness, PPE compliance, and duty readiness of personnel assigned to the operational shift. • Ensure that all personnel deployed under are completed mandatory training requirements as per the prescribed schedule and submit the reports to Training officer. • Monitor serviceability and operational condition of ARFF vehicles, firefighting equipment, rescue tools, communication systems, and station facilities. • Reporting and follow-up of equipment defects, maintenance requirements, and operational deficiencies affecting emergency response capability. • Competency development and operational mentoring of Crew Commanders, Senior Firefighters, Firefighters, and Drivers/Operators. Planning and Programmes • Plan and supervise shift-level operational drills, practical training sessions, equipment familiarization activities, and emergency response exercises. • Implement departmental operational plans, training schedules, inspection programmes, and emergency preparedness activities. • Manage operational activities during shift duty to ensure efficient time management without affecting emergency response readiness. • Participate in operational debriefings, performance reviews, and improvement initiatives arising from incidents, drills, and exercises. • Assist in the implementation of fire prevention activities, operational inspections, and emergency preparedness programmes where assigned. • Ensure completion of all competency development activities as per stipulated timeframe. Core Operational Activities • Respond to all airport emergency calls and conduct tactical deployment of ARFF resources during emergency operations. • Coordinate and direct firefighting, rescue, casualty handling, hazard control, evacuation, and operational containment activities during emergencies. • Maintain effective communication and operational coordination with responding agencies and airport operational departments. • Monitor compliance with operational response procedures, safety precautions, PPE usage, and emergency communication protocols during incidents. • Supervise operational activities within fire stations, including inspections, readiness checks, reporting activities, and operational administration. • Participate in post-incident reviews, operational debriefings, and implementation of corrective actions arising from emergency operations. • Function as initial on scene commander until the arrival of designated OSC. Human Resources Management • Supervise operational personnel during assigned shifts and allocate duties in accordance with operational and training requirements. • Maintain discipline, professional conduct, teamwork, and operational accountability among shift personnel. • Monitor operational performance and competency of personnel and provide guidance, coaching, and mentoring where required. • Conduct training and familiarization activities aimed at improving operational competency and emergency response capability. • Ensure compliance with occupational health and safety requirements and encourage reporting of hazards, unsafe conditions, and operational concerns. Budget and Activity Planning • Propose ARFF CAPEX/OPEX need for next FY to Fire Chief for effective budgetary planning. • Ensures efficient utilization of operational resources, firefighting media, vehicles, equipment, and station facilities. • Monitor operational consumption of firefighting agents, PPE, fuel, and station resources and report replenishment or replacement requirements. • Oversee inventory monitoring and operational stock control activities associated with firefighting and rescue operations. • Supervise shift activities efficiently to maintain operational effectiveness and continuous emergency readiness. Quality and Environmental Management (QMS / EMS) • Ensure operational activities, inspections, and station records are maintained in accordance with approved quality procedures and departmental operational standards. • Participate in audits, operational inspections, and continual improvement activities associated with ARFF operational readiness. • Promote environmentally responsible operational practices during firefighting activities, foam handling, fuel spill response, and hazardous material incidents. Safety Management System (SMS) • Implement Safety Management System (SMS) requirements during operational activities and emergency response operations. • Conduct hazard identification and operational risk assessment during routine activities and emergency incidents. • Ensure operational occurrences, hazards, equipment failures, and safety concerns are reported through approved reporting systems. • Participate in operational investigations, safety reviews, and corrective action implementation associated with incidents and operational occurrences. • Promote safety awareness, operational discipline, and safe working practices among shift personnel.</p><p>Education Bachelor’s degree or equivalent qualification (Essential) Experience • Minimum 12 years of progressive experience in Aircraft Rescue and Firefighting operations. • Experience in Aerodrome Category 8 or above airport operations preferred. • Previous supervisory experience in ARFF operational activities and emergency response coordination is essential. • Additional consideration may be given to candidates possessing operational experience on NAFFCO CFTs. Computer Skills Working knowledge of MS Office Language Skills English: Proficient written and spoken communication skills (Essential). Arabic: Desirable Training Requirements • Fire Officer / Watch Commander / Airport Fire Officer course from a recognised training institution • Heavy vehicle driving license and driving & operation of crash fire tenders</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><b>Job Description </b><div> <p>We are seeking a detail-oriented and organized Housekeeping Attendant to join our team in Baghdad, Iraq. In this role, you will be responsible for maintaining clean, safe, and welcoming environments across our facilities. The successful candidate will demonstrate exceptional attention to detail, strong time management skills, and a commitment to upholding our organization's cleanliness and safety standards.</p> <ul> <li>Perform daily cleaning and sanitization of assigned areas, including offices, common spaces, restrooms, and other facility areas</li> <li>Dust, vacuum, mop, and sweep floors using appropriate cleaning equipment and techniques</li> <li>Empty trash receptacles and dispose of waste in accordance with organizational and environmental guidelines</li> <li>Restock supplies such as paper towels, soap, and other restroom amenities</li> <li>Report maintenance issues, safety hazards, or equipment malfunctions to supervisory staff promptly</li> <li>Follow all health, safety, and chemical handling protocols to ensure a secure work environment</li> <li>Organize and maintain cleaning supply storage areas</li> <li>Collaborate with team members to ensure efficient completion of housekeeping tasks</li> <li>Respond professionally to requests from staff and visitors</li> <li>Maintain accurate records of cleaning schedules and completed tasks as required</li></ul></div></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph">Qualifications </p><div> <ul> <li>Proven experience in housekeeping, cleaning, or facility maintenance</li> <li>Strong attention to detail and commitment to quality standards</li> <li>Excellent time management and organizational skills</li> <li>Knowledge of cleaning chemicals, equipment, and safety procedures</li> <li>Ability to work independently and as part of a team</li> <li>Reliable attendance and punctuality</li> <li>Effective communication skills</li> <li>Willingness to follow instructions and adapt to changing priorities</li> <li>Familiarity with safety protocols and procedures</li> <li>Preferred: Previous experience in a corporate, hospitality, or institutional setting</li></ul></div><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><div> <div> <div> <div> <div> <p><br></p> <p> <strong> </strong> <strong>Who You Are:</strong> </p> <p>Seeking a full-time professional in Iraq supporting a Navigational Aids (NAVAIDS) Maintenance &amp; Repair Support project. This position supports 24/7 aviation operations in a deployed environment and ensures safe, efficient, and compliant airfield operations while supporting mission-critical systems.</p> <p><br></p> <p> <strong> </strong> <strong>What You ll Do:</strong> </p> <ul> <li>Maintain, inspect, troubleshoot, calibrate, repair, and certify NAVAIDS systems including ILS, VOR, TACAN, DME, NDB, airfield beacons, and associated communications interfaces.</li> <li>Perform preventive and corrective maintenance in accordance with FAA, ICAO, DoD, OEM, and contract requirements.</li> <li>Conduct diagnostics, performance testing, alignment, calibration, and fault isolation of NAVAIDS equipment and subsystems.</li> <li>Analyze technical data, schematics, wiring diagrams, and equipment manuals to identify and correct system deficiencies.</li> <li>Perform system commissioning, acceptance testing, and operational verification following maintenance activities.</li> <li>Monitor equipment performance and recommend repairs, upgrades, or replacement actions to maintain operational readiness.</li> <li>Maintain detailed maintenance records, inspection reports, calibration data, and configuration documentation.</li> <li>Coordinate maintenance activities with Airfield Management, Operations, ATC, and other stakeholders.</li> <li>Provide technical guidance and mentorship to junior technicians and assist with workforce training.</li> <li>Respond to emergency outages and restore critical NAVAIDS systems within required response timelines.</li> <li>Ensure compliance with electrical safety, Lockout/Tagout (LOTO), environmental, and quality control requirements.</li> <li>Support airfield operational readiness inspections and mission support activities.</li> </ul> <p> <strong>What You ll Bring:</strong> </p> <strong> </strong> <strong>Required Qualifications</strong> <ul> <li>Must be a US Citizen.</li> <li>Must have computer skills and be able to operate a variety of computer programs.</li> <li>Must be able to speak, read and write English fluently.</li> <li>Must maintain a valid driver's license from their home country with validity for 12 months from on-site employment date.</li> <li>Must maintain a valid passport from their home country with validity for 12 months from the wheels-up deployment date to the site. </li> <li>Must satisfy and maintain all medical screening requirements.</li> <li>Ability to perform essential job duties in a deployed environment.</li> </ul> Additional Required Qualifications <ul> <li>Associate degree, military technical training, or equivalent formal training in Avionics, Electronics, Communications, Electrical Systems, or related discipline.</li> <li>Minimum 8 years of experience maintaining and repairing NAVAIDS systems.</li> <li>Hands-on experience with ILS, VOR, TACAN, DME, NDB, airfield beacons, and related navigation systems.</li> <li>Technical certification in avionics, electronics, communications, or a related field.</li> <li>Demonstrated experience performing calibration, alignment, troubleshooting, and fault isolation of electronic navigation systems.</li> <li>Ability to read and interpret technical manuals, schematics, wiring diagrams, engineering drawings, and OEM documentation.</li> <li>Experience using electronic test equipment including multimeters, oscilloscopes, spectrum analyzers, signal generators, and related diagnostic tools.</li> <li>Experience supporting aviation, military airfield, FAA, ICAO, or DoD operations.</li> <li>Experience supervising or mentoring technicians preferred.</li> <li>Ability to work rotating shifts, weekends, holidays, and emergency call-outs as required.</li> </ul> <p> </p> <p><br></p> </div> </div> </div> </div> </div></div></section>

<p><h4>Job description</h4> <p>In this function, QA/QC Electrical & Instrumentation Inspector will be responsible for site-based activities and monitoring and verifying installation activities for compliance with approved drawings, specifications, ITPs, and procedures of electrical & instrumentation and telecom, HVAC, fire and gas equipment i.e. cable tray, junction box, smoke & heat detector, speakers, lighting & small power, panel, motor, transformer, heat tracing systems, navigational aids, UPS, tubing, pressure, level, temperature transmitter located in Majnoon.</p> <p>Review all project electrical & instrumentation and telecom, HVAC, fire and gas documentations such as ITP, procedure, MS, specification, data sheets, etc.</p> <p>Support and promote project HSSE requirements within QA/QC activities and inspections.</p> <p>QA/QC Electrical & Instrumentation Inspector reports to Site QA/QC Lead and has a reporting line to the Quality Assurance Discipline.</p> <h4>Roles and responsibilities</h4> <ul> <li>Perform quality control activities in accordance with approved inspection & test plans and associated specifications and procedures.</li> <li>Review contractor inspection and test reports.</li> <li>Review all project electrical & instrumentation and telecom, HVAC, fire and gas documentations such as ITP, procedure, MS, specification, data sheets, etc.</li> <li>Inspection of all project Ex certified (ATEX) electrical, instrumentation, telecom, fire and gas, HVAC equipment as per IEC 60079.</li> <li>Inspection and testing of LV & HV, control, instrumentation, telecom’s cabling, glanding, termination, etc.</li> <li>Inspect and monitor installation of the switchboard, distribution board, telecom cabinet, ladder rack, cable trays, heat tracing, CCTV, earthing, glanding & termination, cathodic protection.</li> <li>Inspection of the electrical & instrumentation equipment and telecom, HVAC, fire & gas i.e. cable tray, junction box, smoke & heat detector, speakers, lighting & small power, panel, motor, transformer, heat tracing systems, navigational aids, UPS, tubing, pressure, level, temperature transmitter.</li> <li>Join line walk and identify and close punch items.</li> <li>Work closely and maintain ongoing communication with contractors quality control representatives.</li> <li>Pre-installation checks, installation compliance, pre-commissioning checks and associated risks with each of these areas and ensure problem areas are identified, reported and closed out.</li> <li>Ensure non-conformances are reported in accordance with procedures.</li> <li>Prepare weekly quality control status reports and submit to line manager.</li> <li>Implement QA/QC activities including contractors/sub-contractors works in accordance with approved QCP/ITPs related ITRs and procedures, method statements and other contract documents.</li> <li>Prepare and sign off applicable RFI records for quality surveillance/inspections/tests.</li> <li>Confirm testing parameters are duly recorded and signed off and that testing equipment is calibrated.</li> <li>Witness procedures, tests and certify the results.</li> <li>Issue flash report daily or as agreed with line manager.</li> <li>Play an active role in the development of the safety culture on the project, making safety a natural part of all work performed.</li> <li>Verify certification, tagging, and traceability of E&I materials.</li> </ul> <h4>Skills and experience</h4> <p>A minimum 10 years of QA/QC Electrical & Instrumentation inspection experience in Oil & Gas EPC projects.</p> <p><strong>Mandatory experience and knowledge for:</strong></p> <ul> <li>Instrument/Telecommunication/Fire & Gas</li> <li>Electrical</li> <li>HVAC</li> <li>ESD and SCADA</li> <li>IP Protection</li> <li>ATEX regulations</li> <li>IEC regulations</li> </ul> <h4>Educational experience</h4> <ul> <li>Preferred engineering degree</li> <li>Relevant experience: minimum of 10 years E & I inspection activities</li> <li>Qualified CompEX certification</li> <li>Successful completion of ISO 9001:2015 lead auditor training or transition course, preferred</li> </ul></p><p></p>

<p>Purpose and Scope: Supervise the Maintenance cycle to ensure satisfactory completion of the program objectives. Essential Responsibilities: Supervises all maintenance operations for assigned equipment in accordance with applicable PWS, Company policies, OSHA, DOT, ANSI, ASME and applicable military regulations. Supervises shop foreman and mechanics to include vacation planning, discipline, conducting performance evaluations, and training. Establishes job priorities and estimates down time. Coordinates work flow for downed equipment waiting for parts to minimize backlog of work and cost to customer division. Provides direct support to internal/external customers to ensure compliance, tracking efficiency, burn rates, equipment usage and maximizing cost avoidance measures. Supervises the recovery operations of MHE, VE, CE, Heavy and Light vehicle maintenance throughout assigned area of operation. Coordinates the proper administration, maintenance and distribution of approved publications, warranty documentation, and LDD and ECOD documentation. Provides input to management for forecasting and monitoring of the stock levels for required service/repair parts and petroleum. Responsible for the accurate and timely submission of all required plans and reports. Maintains effective lines of formal and informal communication amongst all levels of management (and the customer) as required. Coordinates collection and preparation of activity reports. Supervise and coordinate all maintenance activities required per the preventive maintenance program. Responsible to provide for and enforce guidelines to ensure the health, safety, and welfare of all assigned employees. Acts as the POC for all maintenance issues in the absence of the Maintenance Manager. Monitors team development and ensures the execution of performance evaluations in accordance with DI policy. Conduct site visits to establish professional relationships with maintenance teams, site personnel, and the customer as needed. Perform all other position related duties as assigned or requested.</p><p><strong>Desired Candidate Profile</strong></p><h2>Minimum Position Knowledge, Skills, and Abilities Required:</h2><ul><li>Associate's degree in an associated discipline</li><li>Two (2) years of experience in related field can be substituted for each year of college</li><li>Six (6) to eight (8) years of logistics experience in a military/tactical environment</li><li>Prefer at least three (3) years in a maintenance supervisor environment</li><li>Understanding of organizational maintenance and supply concepts and procedures</li><li>Understanding of maintenance production, production control and knowledge of U.S Army maintenance support systems?</li><li>Knowledge of MHE, heavy truck and or heavy equipment</li><li>Knowledge of equipment parts acquisition, warranty, LDD, and ECOD submissions</li><li>Must possess knowledge of DOT, OSHA, ANSI, ASME, Military regulations standards and OEM requirements</li><li>Knowledge of diagnostics and ability to conduct technical research</li><li>Strong understanding of Department of Defense contracting policies and procedures</li><li>Outstanding problem solving skills and sound judgment</li><li>Excellent writing, communication, leadership and interpersonal skills</li><li>Demonstrative proficiency in Microsoft application</li><li>Must be able to meet deployment status requirements</li></ul><h2>Work Environment, Physical Demands, and Mental Demands:</h2><ul><li>Ability to stand, sit, walk, stoop, squat, crouch, kneel, push and pull</li><li>Ability to lift and carry up to fifty (50) pounds</li><li>Assist in lifting up to one hundred (100) pounds</li><li>Able to work in both inside and outside conditions</li><li>Be exposed to dust, fumes and gases from running engines and motors</li><li>Living and working conditions at the assignment location could be remote and uncomfortable</li><li>Long hours, exposure to weather and hazardous conditions</li><li>Personnel should be aware of moving on short notice and under adverse conditions</li><li>Ability to travel domestically and internationally</li></ul><h2>Other Responsibilities:</h2><ul><li>Safety - Amentum enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid/buddy aid responsibilities, participating in emergency response tasks and serving on safety committees and teams.</li><li>Quality - Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the Amentum Quality Policy and carry out job activities in compliance with applicable Amentum Quality System documents and customer contracts. Each employee must read and understand his/her Quality Management and Customer Satisfaction responsibilities.</li><li>Procedure Compliance - Each employee must read, understand and implement the general and specific operational, safety, quality and environmental requirements of all plans, procedures and policies pertaining to his/her job.</li></ul>