Food industries engineer Jobs

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>INTECH Process Automation is seeking a skilled<strong> Instrument Design Engineer</strong> to join our Operations &amp; Maintenance (O&amp;M) team. The selected candidate will be responsible for <strong>instrumentation design, engineering deliverables, site surveys, technical coordination, and design verification</strong> for new and brownfield facilities. also ensuring that the designs are technically compliant, constructible, and properly controlled through procurement, installation, commissioning, MOC, and as-built stages.</p><br><p><strong>Key Responsibilities:</strong></p><br><ul><li>Prepare and check <strong>instrument design deliverables</strong> including P&amp;IDs, datasheets, instrument indexes, and specifications.</li><li>Develop and review <strong>I/O lists, loop diagrams, hook-up drawings, cable schedules, and JB schedules</strong>.</li><li>Prepare <strong>MTOs, instrument calculations, specifications, and material requirements</strong>.</li><li>Conduct <strong>site surveys, field verification, walkdowns, and brownfield assessments</strong>.</li><li>Ensure design compliance with <strong>project specifications, Company standards, and applicable engineering practices</strong>.</li><li>Coordinate instrumentation interfaces with <strong>ICSS, Electrical, Mechanical, Civil, Process, Operations, and Engineering</strong>.</li><li>Resolve <strong>technical queries, design discrepancies, and field engineering issues</strong>.</li><li>Support <strong>instrument procurement, technical bid evaluation, vendor document review, and material selection</strong>.</li><li>Support <strong>installation, inspection, testing, loop checking, commissioning, and startup</strong> activities.</li><li>Review and incorporate <strong>MOC changes, redlines, as-built drawings, and final engineering records</strong>.</li><li>Verify design deliverables for <strong>accuracy, consistency, constructability, and interface integrity</strong>.</li><li>Maintain engineering registers, calculations, drawings, and technical documentation in accordance with <strong>document control requirements</strong>.</li><li>Comply with <strong>Company procedures, HSE requirements, quality standards, and project controls</strong>.</li></ul> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>INTECH Process Automation is seeking a Seasoned<strong> Commissioning Engineer (Instrument) </strong>to join our Operations &amp; Maintenance (O&amp;M) team. The selected candidate will be Responsible for <strong>instrument and ICSS pre-commissioning, commissioning, testing, and handover</strong> activities. Ensure systems are safely tested, defects are resolved, impairments are controlled, and equipment is fully documented and ready for reliable operation.</p><br><p><strong>Key Responsibilities:</strong></p><br><ul><li>Lead <strong>instrument and ICSS pre-commissioning and commissioning</strong> activities.</li><li>Prepare and review <strong>commissioning procedures, test packs, check sheets, and schedules</strong>.</li><li>Coordinate <strong>loop checks, calibration verification, functional tests, and Cause &amp; Effect testing</strong>.</li><li>Verify <strong>instrument, control, shutdown, SIS/ESD, and F&amp;G system functionality</strong> as applicable.</li><li>Coordinate <strong>energization, isolation, permits, system interfaces, and safe work execution</strong>.</li><li>Manage <strong>punch lists, outstanding work, test failures, and corrective actions</strong> through closeout.</li><li>Control <strong>system impairments, bypasses, overrides, inhibits, and temporary modifications</strong> during commissioning.</li><li>Coordinate with <strong>Construction, Operations, Instrumentation, ICSS, Electrical, Mechanical, HSE, vendors, and contractors</strong>.</li><li>Verify <strong>test results, calibration records, loop documentation, Cause &amp; Effect results, and commissioning dossiers</strong>.</li><li>Support <strong>startup, shutdown, reinstatement, and controlled return to service</strong>.</li><li>Resolve commissioning issues through <strong>troubleshooting, technical queries, and coordinated corrective actions</strong>.</li><li>Ensure completed systems meet <strong>design requirements, approved procedures, Company standards, and acceptance criteria</strong>.</li><li>Support <strong>handover, as-built documentation, final punch clearance, and system acceptance</strong>.</li><li>Ensure compliance with <strong>PTW, LOTO, HSE, process safety, quality, and commissioning requirements</strong>.</li></ul> </div>

<p>� WE ARE HIRING: Product Manager – Accessories ��� We are looking for a strategic and detail-oriented Product Manager to drive growth for our Accessories portfolio in Iraq! If you have a strong background in category management, a deep understanding of ecosystem selling and attach strategies, and a track record of driving multi-channel growth, this opportunity is for you. � Location: Baghdad, Iraq � Role Type: Full-Time / Product & Category Management ✨ What You’ll Do Go-To-Market & Attach Growth: Develop and execute sales strategies to drive attach rates, bundling programs, and sustained growth across retail, enterprise, SME, and telecom channels. Category & Inventory Management: Manage a complex SKU portfolio while optimizing inventory, efficiency, and overall profitability. Partner Alignment: Act as the strategic liaison between vendors, sales teams, and partners to align commercial priorities and expand ecosystem footprint. Commercial Leadership: Utilize data-driven insights and a strong P&L mindset to outperform market competition and deliver financial targets. </p><p><strong>Desired Candidate Profile</strong></p><p>� Who We’re Looking For Experience: 10–12 years of overall experience, with 8–10 years dedicated to sales or category management within tech/consumer electronics. Domain Knowledge: Strong understanding of premium device ecosystems and accessories portfolios (product certifications preferred). Education: Graduate, Engineer, or Postgraduate degree. Core Skills: Portfolio/SKU management, cross-functional stakeholder alignment, negotiation, and strong analytical decision-making capabilities. </p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>INTECH Process Automation is seeking a seasoned <strong>Rigger </strong>to join our Operations &amp; Maintenance (O&amp;M) team. The selected candidate will be responsible for preparing, inspecting, connecting, and controlling loads during lifting operations in accordance with approved lift plans, rigging procedures, and site safety requirements. Ensure safe handling and movement of equipment and materials supporting construction, instrumentation, and ICSS activities.</p><br><p><strong>Key Responsibilities:</strong></p><br><ul><li>Execute rigging and lifting activities in accordance with approved lift plans and instructions.</li><li>Select suitable slings, shackles, hooks, lifting accessories, and rigging equipment for the load.</li><li>Inspect rigging equipment for damage, wear, defects, certification, and safe working load (SWL) before use.</li><li>Secure and connect loads using approved rigging methods and lifting points.</li><li>Guide load movement using standard hand signals, radios, and clear communication with crane operators.</li><li>Control loads during lifting, slewing, positioning, and lowering to prevent swinging, collision, or uncontrolled movement.</li><li>Establish and maintain exclusion zones and prevent unauthorized access to lifting areas.</li><li>Verify load stability, balance, clearances, and potential obstructions before and during lifts.</li><li>Support the movement and positioning of instruments, ICSS equipment, panels, cable drums, and other materials.</li><li>Stop lifting activities and report unsafe conditions, equipment defects, or deviations from the approved lift plan.</li><li>Maintain proper storage, handling, and traceability of rigging equipment and accessories.</li><li>Coordinate with the Lifting Supervisor, Lifting Engineer, crane operator, banksman, and work crews.</li><li>Comply with PTW, JSA, lifting procedures, HSE requirements, and site rules.</li></ul> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>INTECH Process Automation is seeking a Seasoned<strong> Sr. Instrument Design Engineer</strong> to join our Operations &amp; Maintenance (O&amp;M) team. The selected candidate will be responsible for <strong>senior-level instrumentation and ICSS design assurance, technical reviews, and engineering coordination</strong> for new and brownfield projects. Ensure design deliverables, calculations, specifications, interfaces, and modifications are technically sound, compliant, constructible, maintainable, and properly reflected in as-built documentation.</p><br><p><strong>Key Responsibilities:</strong></p><br><ul><li>Lead <strong>instrumentation and ICSS design engineering</strong> and technical reviews.</li><li>Review and approve <strong>P&amp;IDs, datasheets, instrument indexes, I/O lists, loop diagrams, hook-ups, cable/JB schedules, MTOs, and specifications</strong>.</li><li>Review and approve <strong>instrument calculations, sizing, selection, and engineering deliverables</strong>.</li><li>Ensure compliance with <strong>COMPANY standards, project specifications, applicable codes, and engineering practices</strong>.</li><li>Review <strong>control philosophy, C&amp;E, SIL, SIS/ESD, and F&amp;G interfaces</strong> as applicable.</li><li>Lead <strong>brownfield surveys, constructability reviews, tie-ins, modifications, and MOC activities</strong>.</li><li>Review <strong>vendor technical documents, data sheets, drawings, and engineering submissions</strong>.</li><li>Manage technical interfaces with <strong>ICSS, Process, Electrical, Mechanical, Civil, Operations, Procurement, and Construction</strong>.</li><li>Resolve <strong>technical queries, design discrepancies, field issues, and engineering conflicts</strong>.</li><li>Ensure designs address <strong>installation, commissioning, maintainability, operability, and lifecycle requirements</strong>.</li><li>Support <strong>procurement, FAT/SAT, construction, loop checking, commissioning, and startup</strong>.</li><li>Review and control <strong>redlines, as-built drawings, design changes, and final engineering documentation</strong>.</li><li>Monitor design quality, progress, deliverables, and technical compliance.</li><li>Provide <strong>technical guidance and mentoring</strong> to Instrument Engineers and Designers.</li><li>Ensure compliance with <strong>HSE, quality, document control, MOC, and project requirements</strong>.</li></ul> </div>

<p>� WE ARE HIRING: Product Manager – iPhone ��� We are looking for a high-energy, results-driven Product Manager to own and grow the iPhone business unit in Iraq! If you have a strong background in commercial tech sales, deep expertise in mobile device ecosystems, and a passion for managing multi-channel go-to-market strategies, this is your opportunity to lead growth across retail, enterprise, SME, and telecom channels. � Location: Baghdad, Iraq � Role Type: Full-Time / Product & Commercial Management ✨ What You’ll Do Go-To-Market Execution: Develop and execute sales strategies to drive sustainable growth for iPhone across retail, telecom, SME, and enterprise channels. Channel & Vendor Alignment: Act as the strategic link between vendors, partners, and customers to maximize market share and align sales priorities. Product Lifecycle & NPI: Lead new product introductions (NPI), channel programs, and portfolio enablement to deliver a seamless customer experience. Financial & Commercial Ownership: Bring a strong P&L mindset to analyze data, manage financial targets, and outpace market competition. </p><p><strong>Desired Candidate Profile</strong></p><p>� Who We’re Looking For Experience: 10–12 years of total experience, with 8–10 years focused in sales and commercial product management within Middle East markets. Technical Expertise: Deep understanding of the mobile ecosystem (iPhone specific experience and vendor product certifications preferred). Education: Graduate, Engineer, or Postgraduate degree. Core Skills: Exceptional stakeholder management, data-driven decision-making, commercial acumen, and the ability to present complex technology solutions with clarity. </p>

<p><h4>Job description</h4> <p><strong>Position:</strong> Lead process engineer<br> <strong>Company:</strong> KBR<br> <strong>Project:</strong> Majnoon<br> <strong>Location:</strong> Basra. 28/28 rotation</p> <p>Belong, connect, grow, with KBR! The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</p> <p>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Job purpose</h4> <p>The lead process engineer will own the technical integrity and successful delivery of process engineering scope across projects at different stages (conceptual studies, front-end design (FEED), and detailed engineering) for oil and gas field developments, including upstream offshore/onshore, gas treating, and downstream processing, in greenfield and brownfield environments. This role leads a team of engineers within a multidisciplinary project team, ensuring compliance with industry standards and project specifications, driving technical excellence, and fostering the development of Iraqi national staff.</p> <h4>Job responsibilities</h4> <ul> <li>Lead the preparation and review of process simulations and optimization studies for select/appraise stage projects, and champion the development of process flow schemes with heat and mass balances, equipment sizing, layout, etc., for costing and option selection.</li> <li>Own the detailed process engineering deliverables across all design phases, including process flow diagrams, piping & instrumentation diagrams, equipment datasheets, study reports/manuals, etc., ensuring alignment with international standards and project requirements.</li> <li>Oversee the review of process design work by third parties (vendors) and other offices; champion participation in HAZIDs, HAZOPs, SIL, hazard analysis reviews, and audits; ensure timely issue resolution and closure.</li> <li>Act as the primary technical interface with clients, communicating complex concepts clearly in both written and verbal formats; manage client expectations and confirm technical commitments.</li> <li>Mentor and actively develop Iraqi national staff to fulfill process engineering roles, providing structured on-the-job training, performance feedback, and growth opportunities.</li> <li>Ensure adherence to office quality and safety systems; lead the implementation of quality assurance/quality control practices within the process discipline.</li> <li>Collaborate with other disciplines to drive on-time, efficient, and safe project delivery; lead technical risk management and issue resolution within the process scope.</li> <li>Lead the technical supervision of FEED and detailed engineering activities for offshore/onshore greenfield/brownfield projects, ensuring design integrity and constructability.</li> <li>Support procurement activities by providing authoritative technical input for equipment selection and vendor evaluation, including evaluation of bid technical clarifications.</li> <li>Participate in commissioning and start-up activities, providing seasoned technical support and facilitating smooth handover to operations.</li> </ul> <h4>Functional responsibilities</h4> <ul> <li>Maintain and further develop process engineering standards, best practices, and technical governance within the project teams.</li> <li>Lead risk assessments and develop comprehensive mitigation strategies for process-related issues; own the risk register for the process discipline.</li> <li>Ensure timely delivery of all process engineering deliverables in accordance with project schedules; manage resource planning and workload distribution within the team.</li> <li>Provide technical leadership in design reviews, technical compliance, and governance for all process workstreams.</li> <li>Support and guide procurement activities with robust technical input for equipment specifications, vendor selection, and qualification.</li> <li>Lead commissioning and start-up activities from a process perspective, delivering technical support, commissioning procedures, and start-up readiness reviews.</li> </ul> <h4>Technical skills</h4> <ul> <li>Extensive experience in FEED and detailed engineering design for offshore/onshore greenfield/brownfield projects.</li> <li>Proficiency in process simulation software (e.g., Aspen HYSYS, Flare System Analyzer, ProMax, Pipesim, Pipenet, others).</li> <li>Strong knowledge of process safety management and hazard analysis techniques.</li> <li>Familiarity with relevant industry codes and standards (e.g., API, ASME, ISO).</li> <li>Experience with process control systems and instrumentation.</li> </ul> <h4>Soft skills</h4> <ul> <li>Leadership and team management skills.</li> <li>Strong communication and interpersonal skills.</li> <li>Ability to work collaboratively in a multidisciplinary environment.</li> <li>Problem-solving mindset with a focus on innovation and efficiency.</li> <li>Adaptability to changing project requirements and priorities.</li> </ul> <h4>Qualifications</h4> <ul> <li><strong>Mandatory:</strong> Bachelor’s degree in engineering (chemical, process, or related field).</li> <li><strong>Preferred:</strong> Master’s degree in engineering (chemical, process, or related field) and/or membership of internationally accepted applicable professional institute.</li> <li>10 years of experience in process engineering within engineering contractors, with a focus on FEED and EPC design for upstream onshore/offshore greenfield/brownfield projects.</li> </ul> <h4>Work environment</h4> <p>The role will be based in Iraq, requiring collaboration with local and international teams. The work environment is dynamic and fast-paced, necessitating flexibility and a proactive approach to challenges.</p></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Soluvide (soluvide.com) is a UAE-based software company that builds AI-powered automation tools for businesses — including AI chatbots, workflow automations, custom software, and system integrations.</p><p>We are hiring two Sales Executives based in Iraq,Erbil to identify and develop B2B client relationships for our software and automation solutions across the region.</p><p>What You'll Do</p><p>Identify and approach potential B2B clients across different industries.</p><p>Build and maintain a sales pipeline.</p><p>Present Soluvide's software and automation solutions to decision-makers.</p><p>Understand client requirements and recommend suitable solutions.</p><p>Schedule discovery meetings and product demonstrations.</p><p>Negotiate proposals and close deals.</p><p>Maintain CRM records and follow up with prospects.</p><p>Represent Soluvide professionally in client interactions.</p><p>Qualifications</p><p>Experience in B2B sales, software sales, or technology solutions preferred.</p><p>Background in software development, IT, computer engineering, or related technical fields is an advantage.</p><p>Strong communication and negotiation skills.</p><p>Understanding of business needs and digital transformation.</p><p>Ability to work independently.</p><p>Fluent Arabic, English proficiency, and Kurdish proficiency.</p><p><br></p><p>Skills</p><p>B2B sales and client relationship management</p><p>Strong negotiation and closing skills</p><p>CRM software proficiency</p><p>Understanding of SaaS, software, or AI/tech products (or background in software development, IT, or computer engineering)</p><p>Excellent verbal and written Arabic; English is a strong plus</p><p>Self-motivated with the ability to work independently and manage a full sales pipeline.</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>B2B sales and client relationship management</p><p>Strong negotiation and closing skills</p><p>CRM software proficiency</p><p>Understanding of SaaS, software, or AI/tech products (or background in software development, IT, or computer engineering)</p><p>Excellent verbal and written Arabic; English is a strong plus</p><p>Self-motivated with the ability to work independently and manage a full sales pipeline</p></div>

<p>Capable of establishing effective coordination with Engineering, QA/QC, Construction, Procurement, Commercial, and Subcontractor teams.</p><p><strong>Desired Candidate Profile</strong></p><p>Proficient in Microsoft Office applications, particularly Excel, with the ability to manage comprehensive logs, registers, and tracking tools. Good command of English, sufficient to understand, manage, and respond to formal project correspondence and participate in daily coordination activities. Proven experience in large-scale international construction projects, preferably working within a Main Contractor organization or in Consortium / Joint Venture environments, with exposure to interactions among the Employer, Consultant/Engineer, Main Contractor, and Subcontractors. Minimum 5-6 years of experience as a DCC Specialist One of the most critical requirements is previous involvement in Project Completion, Handover, and Closeout activities, with demonstrated experience in successfully completing the full project closeout process. Minimum experience in the DCC (Document Control Center) Department on at least two international construction projects. Solid experience managing project documentation and official correspondence processes among Employers, Consultants/Engineers, Main Contractors, Subcontractors, and other project stakeholders. Strong knowledge and practical experience in Document Management Systems (DMS/EDMS), preferably including hands-on use of Aconex or similar platforms. Thorough understanding of the registration, distribution, tracking, follow-up, and closure processes related to: Ability to proactively identify missing or outstanding documents and coordinate with relevant departments to ensure timely completion, rather than performing document registration and uploading only. Strong organizational skills with the ability to prioritize workload and manage deadlines effectively within a high-volume document and correspondence environment. Able to quickly adapt to existing document control systems and project procedures and work effectively with minimal supervision.</p>

<p>Capable of establishing effective coordination with Engineering, QA/QC, Construction, Procurement, Commercial, and Subcontractor teams.</p><p><strong>Desired Candidate Profile</strong></p><p>Proficient in Microsoft Office applications, particularly Excel, with the ability to manage comprehensive logs, registers, and tracking tools. Good command of English, sufficient to understand, manage, and respond to formal project correspondence and participate in daily coordination activities. Proven experience in large-scale international construction projects, preferably working within a Main Contractor organization or in Consortium / Joint Venture environments, with exposure to interactions among the Employer, Consultant/Engineer, Main Contractor, and Subcontractors. Minimum 5-6 years of experience as a DCC Specialist One of the most critical requirements is previous involvement in Project Completion, Handover, and Closeout activities, with demonstrated experience in successfully completing the full project closeout process. Minimum experience in the DCC (Document Control Center) Department on at least two international construction projects. Solid experience managing project documentation and official correspondence processes among Employers, Consultants/Engineers, Main Contractors, Subcontractors, and other project stakeholders. Strong knowledge and practical experience in Document Management Systems (DMS/EDMS), preferably including hands-on use of Aconex or similar platforms. Thorough understanding of the registration, distribution, tracking, follow-up, and closure processes related to: Ability to proactively identify missing or outstanding documents and coordinate with relevant departments to ensure timely completion, rather than performing document registration and uploading only. Strong organizational skills with the ability to prioritize workload and manage deadlines effectively within a high-volume document and correspondence environment. Able to quickly adapt to existing document control systems and project procedures and work effectively with minimal supervision.</p>

<p>Capable of establishing effective coordination with Engineering, QA/QC, Construction, Procurement, Commercial, and Subcontractor teams.</p><p><strong>Desired Candidate Profile</strong></p><p>Proficient in Microsoft Office applications, particularly Excel, with the ability to manage comprehensive logs, registers, and tracking tools. Good command of English, sufficient to understand, manage, and respond to formal project correspondence and participate in daily coordination activities. Proven experience in large-scale international construction projects, preferably working within a Main Contractor organization or in Consortium / Joint Venture environments, with exposure to interactions among the Employer, Consultant/Engineer, Main Contractor, and Subcontractors. Minimum 5-6 years of experience as a DCC Specialist One of the most critical requirements is previous involvement in Project Completion, Handover, and Closeout activities, with demonstrated experience in successfully completing the full project closeout process. Minimum experience in the DCC (Document Control Center) Department on at least two international construction projects. Solid experience managing project documentation and official correspondence processes among Employers, Consultants/Engineers, Main Contractors, Subcontractors, and other project stakeholders. Strong knowledge and practical experience in Document Management Systems (DMS/EDMS), preferably including hands-on use of Aconex or similar platforms. Thorough understanding of the registration, distribution, tracking, follow-up, and closure processes related to: Ability to proactively identify missing or outstanding documents and coordinate with relevant departments to ensure timely completion, rather than performing document registration and uploading only. Strong organizational skills with the ability to prioritize workload and manage deadlines effectively within a high-volume document and correspondence environment. Able to quickly adapt to existing document control systems and project procedures and work effectively with minimal supervision.</p>

<p>Implement quality control activities for Structural works as per Project Quality Plan, project specifications, codes and standards and contract requirements Responsible for the organization, safekeeping and attachment of all quality records for materials/products to ITP records for the final acceptance of the Structural works Witness and disposition all site inspections for Structural works Perform site quality control inspections to verify compliance Perform site surveillance inspections to monitor site activities Notify the interested parties identified in ITPs for upcoming inspections Coordinate all site inspections with the subcontractors and the Customers Engineer/Inspector for Structural works Ensure all work is correctly prepared prior to any inspection being undertaken Ensure that all inspection reports are accurate and that all attached documents are current status Assist the QC Manager, Superintendent and Supervisor in the organization, maintenance and control of the quality system Review all Structural inspection reports for compliance Liaise with the site construction engineers and provide assistance when requested Prepare nonconformity reports and assist in developing corrective actions Coordinate with the customers QC Inspectors for the resolution of site problems Coordinate with the site subcontractors to ensure that communications exist and are maintained Assist the site subcontractors in the resolution of drawing interpretation Attend QC meetings Comply with the projects HSE plan and regulations</p><p><strong>Desired Candidate Profile</strong></p><p>Education: Bachelors degree in Civil Engineering, or a relevant technical/vocational diploma.</p><p>Experience: Minimum of 3 years in a similar structural QC role, specifically on large, complex projects.</p><p>Skills: Strong knowledge of structural steel material testing, quality regulations, and intermediate English proficiency.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>INTECH Process Automation is looking for an experienced <strong>Lifting Engineer </strong>to join our <strong>Operations &amp; Maintenance (O&amp;M) team</strong>. The successful candidate will be Responsible for <strong>lift engineering, lifting plans, load calculations, crane selection, rigging arrangements, and critical lifting activities</strong>. </p><br><p><strong>Key Responsibilities:</strong></p><br><ul><li>Prepare and review <strong>lifting plans, lift studies, method statements, and risk assessments</strong> for routine and critical lifts.</li><li>Perform <strong>load, radius, lifting capacity, center-of-gravity, sling-angle, and rigging calculations</strong>.</li><li>Select suitable <strong>cranes, lifting equipment, rigging accessories, and configurations</strong> based on load and site conditions.</li><li>Verify <strong>crane capacity charts, boom configuration, radius, ground conditions, outrigger loads, and ground bearing requirements</strong>.</li><li>Develop and verify <strong>rigging arrangements, lifting points, slings, shackles, spreader beams, lifting beams, and other accessories</strong>.</li><li>Review equipment <strong>certificates, inspection status, SWL/WLL, and certification validity</strong> before lifting activities.</li><li>Verify competency and certification of <strong>Crane Operators, Riggers, Banksmen/Signalers, and Lifting Supervisors</strong>.</li><li>Conduct or support <strong>site surveys, lift-path assessments, access reviews, and obstruction/clearance checks</strong>.</li><li>Supervise or provide engineering support for <strong>critical, complex, tandem, restricted-access, and high-risk lifting operations</strong>.</li><li>Ensure lifting activities comply with approved <strong>lift plans, exclusion zones, communication arrangements, and control measures</strong>.</li><li>Coordinate with <strong>Construction, Maintenance, Mechanical, Instrumentation, Logistics, HSE, Crane Operators, Riggers, and other representatives</strong>.</li><li>Review lifting-related <strong>method statements, JSA/RAMS, temporary works, and technical queries</strong>.</li><li>Monitor lifting execution and stop or escalate activities where <strong>conditions deviate from the approved plan or become unsafe</strong>.</li><li>Maintain accurate <strong>lift plans, calculations, equipment certificates, inspection records, and lifting documentation</strong>.</li><li>Support <strong>lifting audits, incident investigations, lessons learned, and improvement of lifting practices</strong>.</li><li>Ensure compliance with applicable <strong>lifting standards, procedures, PTW, HSE, and critical-lift requirements</strong>.</li></ul> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>INTECH Process Automation is seeking a seasoned <strong>Electrical Engineer (Explosion Proof)</strong> to join our Operations &amp; Maintenance (O&amp;M) team. The selected candidate will be responsible for <strong>hazardous-area electrical and instrumentation Ex inspection, assessment, and compliance verification</strong>. Reviews installations, identifies nonconformities, defines corrective actions, and verifies compliant restoration in accordance with <strong>IEC 60079, approved Ex certification, and Company requirements</strong>.</p><br><p><strong>Key Responsibilities:</strong></p><br><ul><li>Inspect and assess <strong>Ex electrical and instrumentation equipment and installations</strong> in hazardous areas.</li><li>Verify compliance with applicable <strong>IEC 60079 requirements, Ex protection concepts, equipment certification, and installation practices</strong>.</li><li>Inspect <strong>Ex glands, cable entries, seals, plugs, enclosures, junction boxes, terminals, and associated accessories</strong>.</li><li>Verify <strong>earthing, bonding, cable routing, segregation, enclosure integrity, and mechanical condition</strong>.</li><li>Review <strong>Ex certificates, equipment markings, installation records, inspection reports, and hazardous-area dossiers</strong>.</li><li>Identify, classify, and document <strong>Ex defects, nonconformities, unauthorized modifications, and certification discrepancies</strong>.</li><li>Define appropriate <strong>rectification and corrective actions</strong> based on defect severity and applicable standards.</li><li>Verify completion of corrective actions and <strong>compliant restoration of Ex installations</strong> before return to service.</li><li>Support <strong>initial, periodic, detailed, and visual Ex inspections</strong> as applicable to the installation and inspection program.</li><li>Review hazardous-area equipment selection and installation against <strong>area classification, EPL/zone requirements, gas group, temperature class, and Ex protection type</strong>.</li><li>Provide technical support for <strong>Ex equipment installation, maintenance, modification, replacement, and commissioning</strong>.</li><li>Coordinate with <strong>Electrical, Instrumentation, ICSS, Maintenance, Construction, QA/QC, HSE, and approved Ex inspection personnel</strong>.</li><li>Maintain accurate <strong>Ex inspection registers, defect lists, certification records, dossiers, photographs, and closeout documentation</strong>.</li><li>Support <strong>MOC, audits, incident investigations, and reliability initiatives</strong> related to hazardous-area equipment.</li><li>Ensure all activities comply with <strong>IEC 60079, Company procedures, PTW/LOTO, hazardous-area requirements, and HSE standards</strong>.</li></ul> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Chief Investment Officer <ul> <li><span>Posting Date</span>: 11/08/2026</li> <li><span>Ref</span>: IRQ-48</li> <li><span>Position</span>: Chief Investment Officer</li> <li> </li><li><span>Location</span>: Iraq </li> <li><span>City</span>: Baghdad</li> <li> </li><li><span>Sector</span>: Conglomerate</li> <li><span>Years of Experience</span> 15 to 20+ years</li> <li> </li><li><span>Qualification</span>: Bachelor’s degree in Finance, Economics, or Business Administration; CFA Charterholder status and/or an MBA in Finance is strongly preferred.</li> <li><span>Salary</span>: QAR 60,000 – QAR 70,000 per month</li> <li><span>Workdays</span>: 5 </li> <li> </li><li><span>Description</span>: Our client is a prominent, large-scale multi-industry conglomerate with extensive operations spanning Real Estate Development, Hotel &amp; Hospitality Assets, Food Manufacturing, and F&amp;B/Restaurant chains. Expanding aggressively across key regional hubs, the group is seeking a highly analytical, hands-on, and strategic Chief Investment Officer (CIO) to oversee its investment portfolio, lead in-house feasibility and financial modeling, direct deal structuring, and drive cross-sector capital allocation while reporting directly to the Group CEO. (Note: Primary location is Baghdad, Iraq (75% of the time) with periodic travel to Qatar (25%); residency provided). Key Responsibilities <ul> <li>Hands-On Feasibility &amp; Financial Modeling: Personally lead the in-house creation of complex financial models, DCF valuations, feasibility studies, and project projections across Real Estate, Hospitality, FMCG, and F&amp;B without heavy reliance on third-party consultancies.</li> <li>Portfolio &amp; Investment Strategy: Partner with the Group CEO and Board on overarching capital allocation; evaluate cross-sector growth opportunities in Iraq, Qatar, and the broader Middle East; draft strategic investment memos for board presentation.</li> <li>Deal Execution &amp; Structuring: Oversee end-to-end deal structuring, debt/equity financing, corporate negotiations, and joint venture closures for new projects and site acquisitions.</li> <li>Asset &amp; Operational Monitoring: Track ROI, IRR, and operational KPIs for existing real estate developments, hotel properties, factories, and restaurant chains against initial feasibility benchmarks; drive asset optimization and exit strategies.</li> <li>Team Leadership: Build, mentor, and direct an internal team of investment and financial analysts toward technical excellence.</li> </ul> Key Qualifications <ul> <li>Experience: 15 to 20+ years of senior investment leadership within large-scale organizations or conglomerates, with direct experience across Real Estate, Hospitality, and FMCG/F&amp;B sectors.</li> <li>Education &amp; Credentials: Bachelor’s degree in Finance, Economics, or Business Administration; CFA Charterholder status and/or an MBA in Finance is strongly preferred.</li> <li>Technical Mastery: Superior hands-on financial modeling, valuation, deal structuring, and cross-sector M&amp;A expertise.</li> <li>Languages: Native-level Arabic is strictly required; fluent corporate English required.</li> <li>Location &amp; Mobility: Based primarily in Baghdad, Iraq (~75%) with travel to Qatar (~25%) (Middle East candidates preferred; Iraq market experience is a major plus).</li> <li>Work Logistics: 5 to 6 working days per week; joining timeline as per executive notice period/agreement.</li> </ul> <br> More<br> </li> </ul> <br> <br> </div>

<p>We are seeking an experienced Mechanical Engineer to lead the complete MEP works for a prestigious 5-Star Hotel Project in Iraq.</p><p>The successful candidate will be responsible for managing the Mechanical, Electrical, Plumbing, Fire Fighting, ELV, and BMS works from design coordination through procurement, construction, testing &amp; commissioning, and final handover while ensuring the highest standards of quality, safety, and schedule performance. Previous experience delivering luxury hospitality projects is highly preferred.</p><p><b>Key Responsibilities</b></p><ul><li>Lead and manage all MEP activities throughout the project lifecycle.</li><li>Coordinate Mechanical, Electrical, Plumbing, Fire Fighting, ELV, and BMS works.</li><li>Coordinate with architects, structural engineers, interior designers, consultants, and subcontractors.</li><li>Review and approve shop drawings, material submittals, method statements, and technical documentation.</li><li>Monitor project progress, quality, cost, and schedule to ensure successful project delivery.</li><li>Lead procurement planning and coordinate material approvals.</li><li>Manage testing, commissioning, system integration, and project handover.</li><li>Ensure compliance with project specifications, hotel brand standards, local regulations, and HSE requirements.</li><li>Resolve technical and construction challenges proactively.</li><li>Prepare progress reports and attend coordination meetings with the Client and Consultant.</li></ul><p>What We Offer</p><ul><li>Opportunity to lead a landmark hospitality project.</li><li>Professional and collaborative working environment.</li><li>Competitive salary package based on qualifications and experience.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Bachelor's Degree in Mechanical Engineering.</p><p>Minimum 12 years of experience in MEP construction projects.</p><p>Minimum 5 years in a Project Manager or Senior MEP Management role.</p><p>Proven experience delivering at least one 5-Star Hotel Project from construction through testing &amp; commissioning and handover.</p><p>Strong knowledge of HVAC (Chilled Water Systems), Plumbing, Fire Fighting, ELV, BMS, and coordination of Electrical systems.</p><p>Proficiency in Primavera P6, Microsoft Project, AutoCAD, and Microsoft Office.</p><p>PMP certification is an advantage.</p><p>Excellent leadership, communication, and coordination skills.</p><p>Excellent command of English.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Risk Coordinator<br><br><br><br><p><b><i>"Belong, Connect, Grow, with KBR! </i></b></p><br><br><br><p><b><i>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</i></b></p><br><br><br><p><b><i>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets."</i></b></p><br><br><br><p>KBR is looking for a&nbsp;<b>Risk Coordinator </b>to be based in <b>Basra, Iraq – Daily Commute</b></p><br><br><p>The role is responsible for coordinating project risk management activities and supporting schedule integration across the Project.</p><br><br><br><p><b><u>Accountability</u></b></p><br><br><p>The Schedule &amp; Risk Coordinator is accountable for maintaining an effective Project Risk Management process, coordinating risk mitigation activities, and ensuring alignment of interface schedules and milestones across the CSSP Project. The role supports integration between WIP and Pipeline Project schedules, follows execution progress from the field, and provides reliable information to support project decision-making. The position serves as backup to the Planning Engineer when required; however, ownership of the Integrated Project Schedule, schedule development, forecasting, and baseline control remains with the Planning Engineer.</p><br><br><br><p><b><u>Qualifications/Experience required</u></b></p><br><br><br><ul><li>Bachelor's degree in Engineering, Project Management, Construction Management, Risk Management, or a related discipline.</li><li>Minimum 7-10 years of experience in Project Controls, Construction Planning, Risk Management, or Project Execution within major Oil &amp; Gas, Energy, Infrastructure, or EPC projects.</li><li>Extensive field construction experience with direct involvement in site execution, construction sequencing, workfront planning, contractor performance monitoring, and multidisciplinary team coordination.</li><li>Proven experience in developing, maintaining, and challenging Project Risk Registers, risk assessments, mitigation plans, and risk management processes.</li><li>Demonstrated experience in schedule integration, interface management, and coordination of critical milestones across multiple contractors, stakeholders, and project packages.</li><li>Demonstrated ability to identify, assess, and mitigate construction, logistics, procurement, interface, and country-specific project risks.</li><li>Proven ability to independently challenge contractor schedules, risk assessments, mitigation strategies, and execution plans through analytical review and field verification.</li><li>Experience facilitating risk workshops and coordinating mitigation actions with risk owners and project stakeholders.</li><li>Experience working in complex multi-contractor execution environments, including large-scale brownfield and greenfield developments.</li><li>Ability to provide risk-based assessments and construction-driven recommendations to support project management decision-making.</li></ul><p><b>Technical Skills</b></p><br><br><ul><li>Strong knowledge of project risk management methodologies, quantitative and qualitative risk assessment techniques, and risk reporting systems.</li><li>strong understanding of construction execution processes, construction sequencing, work packaging, site productivity, and contractor performance monitoring.</li><li>Strong capability to evaluate construction readiness, identify execution constraints, and assess impacts on project milestones and critical paths.</li><li>Proficient in Primavera P6 and schedule analysis techniques, including critical path analysis, float consumption, schedule risk assessment, and recovery planning.</li></ul><p><b>Personal Competencies</b></p><br><br><ul><li>Strong analytical and problem-solving skills.</li><li>Strong coordination and stakeholder management capabilities.</li><li>Excellent communication and facilitation skills.</li><li>Ability to interact effectively with engineering, construction, contractor, PMC, and project management teams.</li><li>Strong organizational and follow-up skills with attention to detail.</li><li>Ability to work in a multicultural and fast-paced project environment.</li></ul><br><p><b>Languages:</b> English is mandatory, knowledge of French and Arabic is a plus</p><br><br><br><p>Interested and suitable candidates please apply for the role. Suitable candidates will be contacted directly.</p><br><br><br><br><br><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Site E&amp;I Construction lead-(Oil, Gas &amp; Water)<br><br><p><b>Job Description</b>: Construction E&amp;I Lead</p><br><br><p>Company: KBR</p><br><br><p>Location: Iraq (28/28 Rotational Assignment)</p><br><br><p>Nationality: Any</p><br><br><br><p>The Lead Construction Engineer (E&amp;I) will drive construction readiness, optimize field execution strategies, and ensure effective coordination between engineering, procurement, construction, commissioning, and operations. This position requires a seasoned professional capable of leading multidisciplinary teams and consistently achieving project safety, cost, schedule, and quality objectives</p><br><br><br><p><b>Accountability/ Expectations</b></p><br><br><ul><li>Enhance construction safety performance by promoting modularization, standardized assemblies, pre‑fabricated E&amp;I modules, and off‑site construction to reduce field exposure.</li><li>Develop brownfield and greenfield construction strategies, including tie‑in planning, SIMOPS coordination, shutdown integration, and live‑plant execution methodologies.</li><li>Identify and resolve E&amp;I construction challenges such as cable routing conflicts, hazardous area compliance issues, and instrument accessibility constraints.</li><li>Monitor field productivity using discipline-specific KPIs (cable pulling rates, termination progress, loop completion curves, energization milestones).</li><li>Lead construction planning, ensuring detailed sequencing for electrical load transfer, instrument migration, and control system cutover activities.</li><li>Provide constructability input into electrical single-line diagrams, cable block diagrams, instrument indexes, control system architecture, and hazardous area layouts.</li><li>Ensure design decisions align with HSE, cost, schedule, and quality requirements, validating field feasibility and installation constraints.</li><li>Facilitate Constructability Reviews focused on cable routing, instrument maintainability, equipment lifting constraints, and hazardous area compliance.</li><li>Serve as the primary E&amp;I construction interface from project inception through field execution.</li><li>Collaborate with Construction Management to develop execution plans covering power distribution, loop testing, control system migration, and cable management.</li><li>Manage multiple concurrent E&amp;I work fronts, ensuring resource leveling and contractor performance oversight.</li><li>Ensure engineering and procurement deliverables (SLDs, ILDs, P&amp;IDs, I/O lists, datasheets, cable drums, switchgear, instrument panels) align with construction sequencing and commissioning priorities.</li><li>Prepare detailed E&amp;I work packages including cable schedules, termination sheets, loop diagrams, installation drawings, and material take-offs.</li><li>Review and update work package documentation, red-line markups, as-built records, and test documentation.</li><li>Ensure compliance with IEC/NEC standards, ATEX/IECEx requirements, grounding and bonding standards, and project-specific electrical safety rules.</li><li>Support commissioning teams in developing energization plans, loop testing protocols, instrument calibration procedures, and control system functional testing.</li><li>Ensure construction activities integrate seamlessly with commissioning, operations, and other discipline interfaces.</li><li>Advocate for cold-work strategies such as pre-terminated instrument cables, plug-and-play analyzer shelters, and pre-assembled marshalling cabinets.</li><li>Align construction execution with project scope, quality, cost, and schedule targets.</li><li>Ensure engineering and procurement deliverables meet construction and handover requirements.</li><li>Implement Work Face Planning to ensure crews receive fully validated work packages.</li><li>Support interfaces with operations, ensuring safe and efficient brownfield and greenfield execution.</li><li>Ensure final designs incorporate construction risk assessments and economic considerations.</li></ul><br><p><b>Education</b></p><br><br><p>BSc. in Instrumentation, Electrical Engineering, or a related discipline.</p><br><br><br><p><b>Experience Requirements</b></p><br><br><p>Minimum 10 + years experience in Oil &amp; Gas E&amp;I design, construction, and commissioning.</p><br><br><br><p>Strong understanding of:</p><br><br><ul><li>LV/MV electrical distribution</li><li>Instrumentation installation and calibration</li><li>Loop testing and commissioning workflows</li><li>Proficiency in productivity measurement and resource-based planning (Level 4 Scheduling).</li><li>Proven leadership and supervisory experience in managing E&amp;I construction teams and contractors.</li><li>Strong organizational skills with the ability to manage multiple work fronts and shifting priorities.</li><li>High attention to detail with a focus on quality, accuracy, and safe execution.</li></ul><br><br><br><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><br></p> <p> <strong> </strong> </p> <p> <strong> </strong> </p> <p> <strong>The opportunity </strong> </p> <p> <strong> </strong> </p> <p>To support the significant growth of our Technology Risk service in MENA, EY is looking to hire highly qualified resources. Specifically, as part of this job posting, we are looking for a Senior Consultant / Assistant Manager. Working across many different industries, this role will be responsible for executing and leading IT and cybersecurity projects. It is all about listening to our clients, asking the better questions, and supporting them in areas where there are no off-the-shelf solutions.</p> <p> </p> <p> <strong>Your key responsibilities </strong> </p> <p> <strong> </strong> </p> <p>A large part of the role will be engagement delivery and EY will expect the candidates to lead and deliver engagements with very minimal supervision. EY also expects the candidates to support executives in development of proposals, presentations and other business development activities. The candidate will be responsible for the delivery and quality of the final reports to EY's clients. </p> <p>An existing track record of successful engagement delivery in Technology Risk is expected of all candidates for this role. A Big 4 background or comparable consulting experience is highly advantageous. A broad background across IT and Cybersecurity is expected with specific experience in the following areas:</p> <ul> <li>Expertise in Risk and Governance Frameworks, including IT governance frameworks (e.g., COBIT, ITIL, NIST), ISO 27001 standards, information security principles, policy development, and risk assessment.</li> <li>Proficiency in IT Systems Audit, encompassing planning, execution, audit methodologies, complex IT environment evaluation, control weakness identification, and effective communication of findings.</li> <li>Comprehensive knowledge of internal controls over financial reporting (ICFR), covering ITGCs, ITACs, SOX requirements, supporting financial audits with IT expertise, and strong liaison skills with financial auditors.</li> <li>Good understanding around the application systems such as SAP, Oracle, Microsoft Dynamics and operating systems and databases.</li> <li>Strong understanding of Business Continuity Planning (BCP), including BCP/DRP principles, business impact analyses, recovery strategy development, and plan testing.</li> <li>Strong understanding of cybersecurity fundamentals, including common threats, vulnerabilities, basic principles, and contributions to cybersecurity discussions.</li> <li>General Skills: Excellent analytical, problem-solving, communication, presentation, project management, organizational, leadership, client service, and business development skills.</li> </ul> <p> </p> <p> <strong>Skills and attributes for success </strong> </p> <p> </p> <ul> <li>Bachelor's degree in Information Technology, Cybersecurity, Computer Science, or in a related field.</li> <li>Relevant professional certifications (e.g., CISA, CISSP, CISM, ISO 27001 Lead Auditor) are preferred.</li> <li>Minimum of 3 to 5 years of experience in IT audit, information security, or related fields.</li> <li>Strong knowledge of ITGC/ITAC, information security frameworks, and cybersecurity best practices.</li> <li>Excellent analytical, problem-solving, and communication skills.</li> <li>Ability to work independently and collaboratively within a team environment.</li> </ul> <p> </p> <p><br></p> <p> <strong> </strong> </p> <p> <strong> </strong> </p></div></section>

<p>Experienced ELV Engineer to join our QA/QC department, focusing on quality control for extra-low voltage (ELV) and weak current systems in high-rise tower construction project for the Main Contractor. The ideal candidate should have a strong background in site quality inspections for specialized systems, testing &amp; commissioning experience, and the ability to maintain high professionalism and execution capability under intense work and tight schedules.</p><p>Conduct quality inspections throughout all stages of ELV installation works during construction and post-completion phases. Verify site construction quality and compliance against approved drawings, schematic diagrams, and technical specifications. Identify quality deviations, installation defects, interference risks, and non-conformities; track corrective actions to closure. Supervise material receiving inspections (MIR); ensure compliance with approved material submittals and samples in terms of specification, brand, grade, and certification standards. Lead and participate in pre-commissioning inspections, system testing acceptance, and defect rectification processes. Witness and verify multi-system integration testing. Prepare and maintain punch lists for ELV systems; track the rectification status of each defect with photographic and technical records until closure. Review as-built drawings and O&amp;M manuals for completeness and accuracy; ensure compliance with delivery standards. Coordinate with sub-contractors, specialized system vendors, consultants, and the client to complete final acceptance and handover sign-off processes. Maintain the quality documentation system, including quality inspection plans, checklists, and method statements Prepare daily and weekly quality reports to inform management of quality status and critical issues Manage the material submittal log and document version control; ensure the latest drawings are used on site Coordinate multi-disciplinary interfaces at the field level, specifically managing boundaries between ELV systems, LV power supplies, and Mechanical interfaces (HVAC dampers, fire pumps, elevators, etc.) to resolve technical interface issues during installation. Attend quality coordination meetings; follow up on the timely implementation of preventive and corrective measures on site.</p><p><strong>Desired Candidate Profile</strong></p><p>Bachelor's degree or higher in Electrical Engineering, Electronics &amp; Communication Engineering, or a related discipline (or equivalent Technical Diploma with extensive experience).</p>