Heavy equipment mechanical engineer Jobs

<p><h4>Location</h4> <p>Erbil, Iraq</p> <h4>Job summary</h4> <p>The heavy wheel motor vehicle field service representative (FSR) provides on-site technical support and advice to assigned customers.</p> <h4>Principal accountabilities</h4> <p>(Typical duties include the following, although specific duties vary by assignment or contract)</p> <ul> <li>Provide technical guidance and advice to the customer.</li> <li>Present a positive image of self and company’s services.</li> <li>Work effectively with differing customers and cultures.</li> <li>Maintain a safe work environment and ensure compliance with safety objectives and policies.</li> <li>Provide inspection support and perform repairs, sustainment maintenance, retrofits, and modifications to multiple platform vehicles.</li> <li>Conduct technical analysis of vehicle implementations, modifications and enhancements.</li> <li>Troubleshoot technical problems and issues and determine technical solutions.</li> <li>Act as local on-site representative to customer's organization.</li> <li>Document and submit company expense reports and time cards.</li> <li>Perform other qualified duties as assigned.</li> </ul> <h4>Reporting relationships</h4> <p>Title of direct report(s): None<br> Title of supervisor: Program manager, or other supervisor title may vary by assignment</p> <h4>Knowledge & skills</h4> <ul> <li>Must have knowledge of database software, spreadsheet software, presentation software, and word processing software.</li> <li>Knowledgeable of U.S. military vehicle maintenance management publications and guidelines.</li> <li>Ability to interpret and use all types of engineering drawings, schematics, diagrams, and specification sheets.</li> <li>Ability to use all types of power tools, lifting devices, carrying or support equipment, including safe use of slings and chains.</li> <li>Familiar with the use and operation of TMDE (Test, Measurement and Diagnostic Equipment).</li> <li>Must be able to function with minimal supervision.</li> <li>Ability to obtain and maintain a US passport.</li> <li>Ability to obtain a secret security clearance.</li> </ul> <h4>Experience & education</h4> <ul> <li>High school diploma or GED required. Bachelor’s degree preferred.</li> <li>Class A or B CDL preferred.</li> <li>Four (4) years certified vehicle maintenance required.</li> <li>ASE level certification in vehicular and component level fault diagnostics and maintenance or military equivalent.</li> <li>Prior instructional experience delivering technical training in fault diagnostics and maintenance/repair.</li> </ul> <h4>Physical requirements / working environment</h4> <ul> <li>Must be willing and able to work in extreme temperatures.</li> <li>Capability to lift 55 lbs without assistance.</li> <li>Must be able to meet medical and physical fitness requirements to enter into and maintain deployment in accordance with customer requirements.</li> <li>Live and work in an austere environment in an active combat zone most likely under U.S. government control.</li> </ul> <h4>Travel</h4> <ul> <li>Able to travel domestically and internationally.</li> <li>Relocate to different locations within the area of responsibility on short notice to support assignment.</li> </ul></p><p></p>

<br><ol><li><p>Establish, develop and maintain the overall Project Master Schedule, baseline schedule and integrated project schedule in line with Contract requirements and Company procedures.</p></li><li><p>Prepare detailed Work Breakdown Structure (WBS), activity definition, logic relationships, durations, resources and cost loading using Primavera P6 (or equivalent planning software).</p></li><li><p>Monitor and update project progress on a regular basis (weekly/monthly), calculate physical % complete, prepare S-curves, histograms, progress reports and dashboards.</p></li><li><p>Identify critical path, float, schedule risks and potential delays; prepare recovery plans and what-if scenarios when necessary.</p></li><li><p>Coordinate with engineering, procurement, construction, subcontractors and client teams to collect accurate progress data and resolve planning issues.</p></li><li><p>Prepare and submit timely progress reports, look-ahead schedules, manpower histograms and material delivery forecasts to Project Manager and Client.</p></li><li><p>Perform delay analysis, support Extension of Time (EOT) claims preparation and provide forensic planning inputs when required.</p></li><li><p>Lead planning review meetings, present schedule status and forecasts to senior management and stakeholders.</p></li><li><p>Ensure proper version control of schedule files and maintain historical schedule records for traceability.</p></li><li><p>Support project close-out by preparing as-built schedules, lessons learned and handover documentation related to planning.</p></li><li><p>Maintain confidentiality of sensitive project schedule and commercial information.</p></li><li><p>Authorities:</p><ol><li><p>Access and manage the project planning/scheduling system and databases (Primavera P6, etc.).</p></li><li><p>Review and approve/disapprove subcontractor/consultant submitted schedules for compliance with project requirements.</p></li><li><p>Request clarification, missing progress data or corrective actions from relevant departments/disciplines for accurate schedule updating.</p></li><li><p>Enforce schedule update procedures, coding standards, WBS structure and reporting requirements across the project team.</p></li><li><p>Compliance of planning practices with Contract requirements, Company procedures and industry standards (e.g. AACE, PMI).</p></li></ol></li></ol><p><strong>Desired Candidate Profile</strong></p><br><ol><li><p>Bachelor’s degree in Engineering (Civil, Mechanical, Electrical, Industrial), Construction Management, Project Management or a related discipline.</p></li><li><p>Minimum 10 years of planning/scheduling experience in EPC or large-scale construction projects (preferably in Oil & Gas, Infrastructure or Industrial sectors), with at least 3–5 years in a Lead/Senior Planning Engineer role.</p></li><li><p>Proven experience in developing and managing Level 3–5 schedules using Primavera P6 (mandatory); MS Project experience is a plus.</p></li><li><p>Strong knowledge of project controls principles, progress measurement, earned value management (EVM), delay analysis and claims support.</p></li><li><p>Familiarity with international project environments, FIDIC/EPC contract forms and Client reporting requirements in the Middle East.</p></li><li><p>Working proficiency in English (written and spoken) is required.</p></li><li><p>Physical Requirements</p><ol><li><p>Ability to work in an office-based project environment with occasional site visits.</p></li><li><p>Capability to handle prolonged computer-based work and attend extended meetings.</p></li><li><p>Ability to work under pressure and meet tight reporting/submission deadlines.</p></li></ol><p>Skill Requirements</p><ol><li><p>Advanced proficiency in Primavera P6 (resource loading, baseline management, critical path analysis).</p></li><li><p>Strong analytical, problem-solving and forecasting skills.</p></li><li><p>Excellent organizational, time management and attention to detail.</p></li><li><p>Good communication, presentation and coordination skills with multidisciplinary and multicultural teams.</p></li><li><p>Proficiency in MS Office applications (Excel advanced functions, Word, PowerPoint, Outlook).</p></li><li><p>Ability to maintain confidentiality of sensitive project schedule and commercial data.</p></li></ol></li></ol>

<p>Under general autonomy and wide scope: The Well Engineering Manager functions as a technical Subject Matter Expert (SME), typically at the Country level staying abreast of current industry and PSL technological developments. 2 This position is accountable for the implementation of Engineering processes with respect to quality and integrity assurance. Reviews and maintains HMS processes to ensure the management system remains up-to-date with industry best practices. Responsible for approval of Well Designs and/or Programs and ensures these are in compliance with contracts, as well as, the Company's HMS policies &amp; procedures. Ensures all Operational Activities are adequately evaluated and a full Risk Matrix table with Mitigation plans is completed. Responsible for resolving critical engineering/operational issues, identifying chronic problems and proposing solutions, ensuring optimum technical solutions for field project development, and compliance with all Project/Contract metrics. Coordinates engineering programs/procedures and practices among different Projects and/or Rigs. Supports development of new technology and champions the application and deployment of the same. Leads technical presentations to client. Provides work direction and mentorship on a regular basis to Engineers. Responsible for the training &amp; development of Well Engineers and their competency development. Operates with significant level of technical and/or operational independence in all assigned areas.</p><p>Additional Role Responsibilities: (1) Ability and flexibility to travel to Iraq both domestically and internationally typically 28/28 days per business required. (2) Provides Managership and guidance to both planning and operational teams. (3) Demonstrates support of the management system (4) Manages all well planning, design and engineering activities associated with drilling, completions and abandonment operations. (5) Ensures the team properly consider design options, assess risks and validate costs and work closely with other Wells/technical teams, legislative bodes and service providers at various stages of the well planning process to ensure viability of proposals. (6) Manages well operations to effectively control the risk, technical execution, cost control and ensures compliance with policies and procedures. (7) Manages operational deviations from Company policy with suitable adherence to the risk assessment process. (8) Manages platform rig engineering in the planning and execution of rig maintenance, rig modifications, recertification and upgrades. (9) Ensures peer reviews, risk assessments, engineering/planning reviews, etc. are undertaken. (10) Sets performance targets and implements performance measurement and improvement processes. (11) Ensures that the lessons learned system is utilized to record lessons and used to transfer lessons into detail well planning to complete the full learning cycle.</p><p><strong>Desired Candidate Profile</strong></p><p>Requires an undergraduate degree in STEM, preferably in Petroleum or Mechanical Engineering, and 12+ years experience as a Well Engineer with knowledge of drilling, completions, intervention operations and techniques. Demonstrated experience in leading or supervising an engineering team. Must have a Well Control certificate.</p><p>Preferred Experience: Minimum of 15-years relevant experience in their discipline or in an operations environment within the oil &amp; gas industry.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Site Electrical Supervisor<br><br><p><i><b>"Belong, Connect, Grow, with KBR!</b></i></p><br><br><br><p><i><b>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</b></i></p><br><br><br><p><i><b>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets."</b></i></p><br><br><br><p>KBR is looking for a&nbsp;<b>Site Electrical Supervisor </b>to be based in <b>Basra, Iraq – Daily Commute</b></p><br><br><br><p><b><u>MAIN MISSIONS</u></b></p><br><br><ul><li>Ensure safe, compliant, and high-quality execution of all electrical construction, installation, testing, and pre-commissioning activities at site.</li></ul><ul><li>Supervise EPC Contractor and subcontractors electrical works in accordance with approved drawings, project specifications, method statements, ITPs, applicable codes, and COMPANY requirements.</li></ul><ul><li>Coordinate electrical activities with construction, engineering, QA/QC, HSE, commissioning, and other disciplines to achieve the project schedule and system priorities.</li></ul><ul><li>Identify technical, quality, safety, and constructability issues, and ensure timely resolution and close-out.</li></ul><ul><li>Support mechanical completion, energization readiness, commissioning, and handover of electrical systems.</li></ul><br><p><b><u>KEY ACTIVITIES</u></b></p><br><br><p><b>Site Supervision and Construction Control</b></p><br><br><ul><li>Supervise daily electrical construction activities, including installation of HV, MV, and LV equipment and systems.</li></ul><ul><li>Monitor installation of transformers, switchgear, motor control centres, generators, UPS and DC systems, distribution boards, power and control cables, lighting, small power, earthing, lightning protection, and electrical heat tracing where applicable.</li></ul><ul><li>Verify equipment location, orientation, access, supports, interfaces, and installation against approved AFC drawings and vendor requirements.</li></ul><ul><li>Ensure cable tray, ladder, conduit, cable pulling, segregation, dressing, glanding, termination, identification, and fire-stopping works comply with project requirements.</li></ul><ul><li>Monitor preservation, storage, handling, and protection of electrical equipment and materials at site.</li></ul><ul><li>Ensure work fronts are properly planned and that required drawings, materials, tools, access, permits, and preceding works are available.</li></ul><br><p><b>Technical Compliance and Quality</b></p><br><br><ul><li>Ensure execution in accordance with approved AFC drawings, specifications, equipment data sheets, vendor documentation, method statements, ITPs, and applicable international standards.</li></ul><ul><li>Participate in inspection requests and witness required hold and witness points with QA/QC personnel.</li></ul><ul><li>Inspect equipment installation, bolted connections, cable routing and segregation, terminations, earthing connections, labelling, and general workmanship.</li></ul><ul><li>Witness or review electrical tests, as applicable, including insulation resistance, continuity, earthing resistance, winding resistance, ratio tests, protection relay tests, cable tests, functional checks, and interlock verification.</li></ul><ul><li>Review and follow up punch items, site observations, non-conformities, and corrective actions until closure.</li></ul><ul><li>Assist in checking red-line mark-ups, test records, inspection reports, and as-built documentation.</li></ul><br><p><b>Contractor Supervision and Progress</b></p><br><br><ul><li>Monitor contractor and subcontractor manpower, supervision, productivity, work quality, and compliance with the approved construction schedule.</li></ul><ul><li>Review short-term work plans and report constraints, delays, interface issues, and recovery requirements to the Electrical Superintendent or Construction Manager.</li></ul><ul><li>Attend daily coordination meetings, site walkthroughs, progress reviews, toolbox talks, and technical meetings as required.</li></ul><ul><li>Prepare clear daily and weekly reports covering progress, manpower, inspections, constraints, quality issues, HSE observations, and planned activities.</li></ul><ul><li>Ensure contractor personnel assigned to specialized electrical work are competent and appropriately authorized.</li></ul><br><p><b>Interfaces, Completion and Commissioning</b></p><br><br><ul><li>Coordinate electrical interfaces with civil, structural, mechanical, piping, instrumentation, telecom, HVAC, package vendors, and commissioning teams.</li></ul><ul><li>Ensure foundations, embedded items, sleeves, trenches, rooms, supports, cable routes, and equipment access are ready before electrical installation.</li></ul><ul><li>Support systemization, mechanical completion checks, punch-listing, turnover dossier preparation, and handover by system or subsystem.</li></ul><ul><li>Participate in energization readiness reviews and ensure outstanding construction, quality, and safety items are controlled before energization.</li></ul><ul><li>Support pre-commissioning and commissioning activities, including vendor attendance, functional testing, loop and interlock checks, and troubleshooting.</li></ul><br><p><b><u>HSE RESPONSIBILITY</u></b></p><br><br><ul><li>Ensure electrical works are performed in accordance with project HSE requirements, approved risk assessments, method statements, permit-to-work procedures, and isolation rules.</li></ul><ul><li>Pay particular attention to electrical safety, lockout/tagout, temporary power, excavation and underground services, lifting operations, work at height, confined spaces, and simultaneous operations.</li></ul><ul><li>Intervene and stop unsafe work when necessary, report unsafe acts and conditions, and verify implementation of corrective measures.</li></ul><ul><li>Participate in toolbox talks, safety walks, audits, incident investigations, and lessons-learned activities.</li></ul><ul><li>Promote a strong safety culture and ensure good housekeeping in electrical work areas, substations, electrical rooms, and cable routes.</li></ul><br><p><b>Professional Experience</b></p><br><br><ul><li>More than 10 years of relevant experience in electrical construction and site supervision on large EPC/EPSCC projects in oil and gas, power generation, water treatment, utilities, or major industrial facilities.</li></ul><ul><li>Significant field experience supervising electrical installation, testing, pre-commissioning, and handover activities.</li></ul><br><p><b>Experience in Similar Position</b></p><br><br><ul><li>Previous experience as Site Electrical Supervisor, Electrical Construction Supervisor, or equivalent position on a major project.</li></ul><ul><li>Hands-on experience with HV, MV, and LV systems; transformers; switchgear; MCCs; UPS and DC systems; power and control cables; earthing; lighting; and electrical equipment associated with rotating and packaged equipment.</li></ul><ul><li>Experience in power generation facilities, large pumping stations, substations, or water treatment plants is preferred.</li></ul><ul><li>Experience on Middle East projects and/or remote construction sites is an advantage.</li></ul><br><p><b>Technical Skills</b></p><br><br><ul><li>Strong knowledge of electrical construction methods, installation practices, inspection requirements, testing, energization, and completion processes.</li></ul><ul><li>Ability to read and interpret single-line diagrams, schematics, wiring diagrams, cable schedules, equipment layouts, earthing layouts, interconnection diagrams, vendor drawings, and AFC documentation.</li></ul><ul><li>Good understanding of electrical interfaces with civil, mechanical, instrumentation, telecom, HVAC, and package systems.</li></ul><ul><li>Familiarity with ITP, RFI, NCR, punch-list, mechanical completion, turnover, and quality-record processes.</li></ul><ul><li>Working knowledge of applicable IEC, IEEE, NFPA, ISO, and project-specific standards and requirements.</li></ul><ul><li>Competence in reporting, progress monitoring, work-front planning, and use of standard office applications.</li></ul><br><p><b>Level / Diploma</b></p><br><br><ul><li>Bachelor’s Degree in Electrical Engineering preferred.</li></ul><ul><li>A recognized technical diploma in Electrical Engineering may be accepted with substantial relevant site experience.</li></ul><ul><li>Relevant electrical safety, HV authorization, commissioning, or construction supervision training is an advantage.</li></ul><br><p><b>Languages</b></p><br><br><ul><li>Proficiency in English is mandatory. Knowledge of Arabic is an advantage.</li></ul><br><p><b>Soft Skills</b></p><br><br><ul><li>Strong field presence, leadership, and contractor-management capability.</li></ul><ul><li>Clear communication and coordination skills in a multicultural environment.</li></ul><ul><li>Proactive, practical, safety-conscious, and quality-focused approach.</li></ul><ul><li>Ability to prioritize work, resolve site issues, manage interfaces, and work under schedule pressure.</li></ul><ul><li>Ability to challenge non-compliant work and intervene firmly when safety or quality is at risk.</li></ul><br><p><span>Interested and suitable candidates please apply for the role. Suitable candidates will be contacted directly.</span></p><br><br><br><br><br> </div>

<p><h4>Overview</h4> <p>As maintenance advisor, you will play a key role in enabling safe, reliable, and efficient maintenance execution at site. Acting as the main interface between the ROO and BOC maintenance teams and site operations, you will guide priorities, coach national staff, and ensure effective work management. Your influence, collaboration, and technical leadership will support timely execution of planned and unplanned maintenance while ensuring strong safety and compliance standards.</p> <h4>Key responsibilities</h4> <strong>Leadership</strong><br> <p>Promotes a culture of open safety reporting, continuous improvement, and shared respect across a diverse workforce. Encourages team engagement and promotes accountability aligned with ROO’s values and behaviours.</p> <strong>Risk / Operating discipline</strong><br> <p>Accountable for the safe execution of all maintenance activities, ensuring strict adherence to safety standards and risk management protocols. Maintains zero tolerance for overdue maintenance, particularly SCEs and anomalies, and ensures high-quality deferral processes.</p> <strong>Maintenance execution</strong><br> <p>Accountable for effective and efficient asset maintenance across multi-discipline activities, including preventive (PM) and corrective maintenance (CM). Conducts daily validation and maintenance planning meetings to ensure timely prioritization and approval of work. Leads compliance with standardized work management processes, including deferral management and risk mitigation. Oversees contractor-executed tasks by reviewing CTRs for scope quality, cost, resource utilization, materials, and duration. Manages scaffolding needs by initiating requests and ensuring prompt dismantling after completion. Maintains up-to-date records in the O&M tracker and supports reporting accuracy. Owns and maintains the ROO choke model for assigned sites to ensure plant vulnerabilities are understood, tracked, and addressed. Drives plant and equipment availability and supports reliability improvement initiatives, ensuring RCFA actions are followed through to closure.</p> <strong>People</strong><br> <p>Coaches and develops direct reports to support the nationalisation agenda, ensuring timely delivery of personal development plans aligned with the nationalisation plan.</p> <strong>Delivery, optimization & reliability</strong><br> <p>Recommends execution optimization opportunities to the METL and manages the 12-week maintenance activity schedule, deciding what enters the 2-week execution window. Ensures nesting of activities and addresses risks before scheduling, supports timely change management (MOC) and engineering queries to meet business objectives. Assists operations in returning plant to safe operation post-interventions, ensuring timely closeout of GOC paperwork, walkdowns, and PSSR sign-offs. Champions continuous improvement by standardizing best practices, optimizing maintenance strategy, materials staging, and maintenance build. Inputs and manages maintenance budgets for site TAR and train outages.</p> <h4>Experience, qualifications & key skills</h4> <ul> <li>Over 15 years’ oil & gas experience, ideally with IOCs</li> <li>Technical degree or HNC in engineering</li> <li>Previous experience in maintenance lead or superintendent roles</li> <li>Strong knowledge of maintenance planning, scheduling, and CMMS (Maximo)</li> <li>Proven leadership of multi-discipline, multicultural teams</li> <li>Skilled in hazard identification, communication, and priority setting</li> <li>Results-driven with focus on continuous improvement</li> <li>Experience in diverse, multilingual environments preferred</li> </ul> <h4>Interfaces</h4> <p>Collaborate closely with maintenance execution team leader, scheduler, coordinators, work prep specialists, site operations, planning, BOC execution teams, OTL, operations and discipline advisors, service providers, PSCM/materials, and HSE teams to ensure safe, efficient completion of maintenance activities, projects, and emergencies.</p> <h4>Procedures and processes</h4> <p>The MA must have strong knowledge of key ROO procedures including work management & CMMS (with deferral process), activity planning and scheduling, CTR procedures, control of work (HWNF, ORA, SORA, containment, ground disturbance, CSE), MOC/EQ process, and GOC.</p> <h4>Summary of decision rights</h4> <p>The MA is responsible for stopping unsafe work or plant operations (with escalation to the site engineer or higher when necessary), recommends priority maintenance tasks to ensure safety and reliability, decides which activities enter the 2-week execution schedule, supports MC competency development, contributes to vulnerability assessments, and advises on prioritization of CoW and SIMOPS.</p> <h4>Meetings to attend</h4> <ul> <li>Daily: Morning maintenance, site engineer prioritization, work order validation, afternoon ops & maintenance meetings</li> <li>Weekly: Team meeting, bi-weekly planning meeting</li> <li>Fortnightly: 12-week schedule meeting</li> <li>Monthly: Vulnerabilities meeting</li> <li>Ad hoc: TAR Bookies Board, TAR Ops, Projects Ops & Safety Review, production losses, and other required meetings</li> </ul></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are currently looking for&nbsp; dynamic, and self motivated Food &amp; Beverage professionals who want to move their careers forward.<br><br>As part of the team, some of the key responsibilities will include:<br><br>• Clean food processing facilities, storage rooms, walk in fridge’s, kitchen utensils, immediate corridors and holding areas as well as the operation equipment<br>• Work in close cooperation with all kitchen and service employees<br>• Work as per duty schedule and shifts<br>• Perform all stewarding tasks as per given instructions<br>• Ensure minimum wastage, breakage and spoilage</p> </div>

<p><br></p><p>What makes you remarkable? At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world s most critical challenges.</p><p>Expected: 6-8 years in Commissioning / Field Operations activities. Experience in similar position (years): At least 3 years of experience in similar position during project, relevant site experience in an onshore field. Experience as Production Manager, Site Manager or equivalent is a plus. Knowledgeable of rules and specifications Knowledgeable of OPERCOM and ICAPS Knowledgeable of Engineering, Construction, Hook-up/commissioning and Start Up. Good communication skills and fluency in English Level / Diploma: Engineer Languages: English mandatory</p><p>The position will be based in Basra (Iraq) on rotational basis (4 weeks On /4 weeks Off) Duration 2/3 years</p><p>The role This is an exciting opportunity for an experienced Commissioning Process Lead to join our Iraq Business Unit. Our Clients and Projects Designing the future. Transforming the world. This Project aims to take over the existing asset and maximize the production in 2 phases. This is a fast-track project and schedule-oriented Design to enhance the production. The Phase 1 will restore, upgrade, and develop the current plant (CPF1) including: Restoration of initial CPF1 capacity; building a new export pipeline (24 , ~30km); restoration of CPF1 integrity and operability; flaring elimination and released water; development of new flowlines, pads, and electrification network for approximately 30 new wells; debottlenecking of the plant; upgrade of the Safety and Security facilities. Our scope is to provide Engineering, Procurement services and Construction assistance (EPsCa) for the initial development phase of the field in Southern Iraq. The scope of services includes FEED, detailed design, procurement support, and construction and commissioning assistance.</p><p>What we can offer Meaningful and interesting projects Delivered to high profile clients and complex projects in Iraq Commitment to Diversity and Inclusion ; we are an organisation actively committed to diversity and inclusion across our business with employee networks committed to giving all employees a voice Competitive salary with regular salary reviews to ensure we are rewarding at the right level in line with the market Medical Insurance: Ensures inpatient and outpatient medical care is available should you require treatment. Commitment to continued professional development; development plans that are tailored to your individual needs and interests Global connections : join experts around the world who are at the leading edge of our industry, shaping the standards of our profession Long Service Award: Wood values the commitment and loyalty of our people. Celebrating Long Service provides an opportunity for the business to demonstrate their appreciation of the hard work, dedication and many years services of our employees at 5-year service milestones</p><p>Job Objectives: In this position, the main missions are: To adopt &amp; demonstrate an exemplary behavior with regard to HSSE requirements. To adopt and demonstrate an exemplary behavior with regard to the Company Ethics and Code of Conduct policy and to promote and enforce the Corporate Anti-Corruption Program within the project team. To ensure that latest digital and carbon footprint reduction initiatives are studied and implemented if possible.</p><p>Review the preparation of the Commissioning for systems which he is in charge of. This includes: procedures, reporting tools (ICAPS, planning, punch list control), requisition for equipment, spares, special tools and review of the Commissioning Dossier with particular attention to Operational Test Procedures. System / Sub System preparation, Start Up and Commissioning sequence. Ensure adequate involvement of Field Operations in Commissioning documentation review (particularly for OTs). To provide assistance to the Contractor during the detailed preparation of the Commissioning planning, in order to optimise the schedule by maximising the Commissioning activities to a minimum. To assist the Commissioning Manager in identifying and addressing all internal/external interface issues with respect to Commissioning. Throughout the preparation phase, liaise with corresponding Area engineers. To promote HSE behaviour within the commissioning activities and verify that HSE procedures are implemented by Commissioning Team. To witness the pre-commissioning activities performed by Contractor and ensure systems have reached the RFC status with associated punch list. To define, with Commissioning Manager, Commissioning specialist supervision/execution needs. To ensure progress (from ICAPS database) is in accordance with priorities defined in the Commissioning and Start-up sequence in order to reach the planned end date. To monitor and follow-up the execution of commissioning (including attendance to FATs at manufacturers premises) to achieve maximum productivity, minimize cost and achieve smooth handover. To validate the results of the operational tests for systems he is in charge of, ensuring adequate involvement of Field Operations. To co-ordinate Field Operations witnessing and assist in Handover preparation. To ensure together with the ICAPS coordinator the correct update of the Commissioning dossiers for the systems he has been assigned. To follow-up and approve punch list items entry / clearance. To prepare and supervise the material / spares / tools / first fill status during Commissioning. To ensure optimal vendor intervention planning. To be responsible for PID s conformity checks ( as commissioned documents) for all systems he is in charge of). To ensure that adequate care and maintenance/preservation and operation of equipment are carried out until handover to Field Operations. Controls Commissioning activities and identifies priorities to meet systems AOC status as per schedule for the systems he is in charge of. To ensure Vendor s recommendation for preservation procedures are applied and followed via CTR tool. To ensure Vendor s/equipment/package punch list coordination and input into ICAPS.</p><p><br></p><p><strong>Desired Candidate Profile</strong></p>Expected: 6-8 years in Commissioning / Field Operations activities. Experience in similar position (years): At least 3 years of experience in similar position during project, relevant site experience in an onshore field. Experience as Production Manager, Site Manager or equivalent is a plus. Knowledgeable of rules and specifications Knowledgeable of OPERCOM and ICAPS Knowledgeable of Engineering, Construction, Hook-up/commissioning and Start Up. Good communication skills and fluency in English Level / Diploma: Engineer Languages: English mandatory

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are seeking a motivated and results-driven Sales Representative to join our team in Iraq. The successful candidate will be responsible for promoting and selling medical equipment, healthcare solutions, and consumable products to hospitals, clinics, laboratories, and healthcare professionals.</p><p><br></p><p>Requirements</p><ul><li>raqi resident based in Baghdad.</li><li>Bachelor's degree in Biomedical Engineering, or a related field.</li><li>Previous experience in medical equipment or healthcare sales is preferred.</li><li>Strong communication, negotiation, and presentation skills.</li><li>Ability to build professional relationships with healthcare providers.</li><li>Self-motivated, organized, and target-oriented.</li><li>Willingness to travel within Baghdad and other areas of Iraq when required.</li><li>Good command of Arabic and English is preferred.</li><li>Car is a must. </li></ul><p> Interested candidates are invited to apply and send their CV.</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p><br></p><ul><li>Develop and maintain strong relationships with hospitals, clinics, doctors, and healthcare institutions.</li><li>Promote medical equipment and healthcare solutions to potential customers.</li><li>Identify new business opportunities and expand the customer network.</li><li>Conduct product presentations and demonstrations.</li><li>Prepare quotations and follow up with customers throughout the sales process.</li><li>Achieve sales targets and provide regular market feedback.</li><li>Monitor market trends and competitor activities.</li><li>Coordinate with the technical and management teams to ensure customer satisfaction.</li></ul></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span>The role of Operations Coordinator focused on inventory management, asset utilisation, procurement coordination, and logistics support across a regional operation. Liaising with client on any operational issues.&nbsp;</span></p><br><p><span>Responsibilities:</span></p><br><ul><li><span><span>Locate and identify underutilised assets in the region.&nbsp;</span></span></li><li><span><span>Monitor expendable supply stocks in each location in the region.&nbsp;</span></span></li><li><span><span>Move excess stocks of expendables from location to location to consume excess.&nbsp;</span></span></li><li><span><span>Set-up central expendable stock points that serve outlying locations using a hub &amp; spoke distribution plan.&nbsp;</span></span></li><li><span><span>Place replenishment orders for the central stock point with no purchases made at the outlying locations.&nbsp;</span></span></li><li><span><span>Coordinate capital equipment purchases and key product purchase agreements with the Houston purchasing and materials management group to maximize the companies purchasing volume.&nbsp;</span></span></li><li><span><span>Provide support as required and directed to operations/administrative departments such as inventory/asset tracking, marketing, accounting, corporate development, regional, field operation.&nbsp;</span></span></li><li><span><span>Provide support to domestic operations in arranging for the movement of rental, fishing, and other service equipment to gain optimum utilization and revenue.&nbsp;</span></span></li><li><span><span>Serve as the region focal point for conducting searches in the region for equipment which can be used to avoid purchasing, sub-renting or transferring equipment to meet job requirements&nbsp;</span></span></li><li><span><span>Know and understand Weatherford Quality Policy and comply with all requirements of the Quality Systems Manual, Operating and Technical Procedures and Workplace Instructions.&nbsp;</span></span></li><li><span><span>Must understand and comply with all safety rules and company policies of Weatherford.&nbsp;</span></span></li><li><span><span>Work assignments carried out to the highest quality level.&nbsp;</span></span></li><li><span><span>Perform various other duties and activities as assigned by supervisor within the physical constraints of the job.</span></span></li></ul><p><span>Required:&nbsp;</span></p><br><ul><li><span><span>Minimum 3-4+ years operational experience plus 0-1 years coordinator experience</span></span></li><li><span><span>Have engineering background&nbsp;</span></span></li><li><span><span>Field and/or Workshop experience of well service equipment is essential</span></span></li><li><p><span>Exposure to tenders and P&amp;L</span></p><br></li><li><span><span>Fluent English and strong communication skills both written and verbal&nbsp;</span></span></li><li><p><span><span>Should be able to work closely with internal and external customers</span></span></p><br></li><li><span>Technical Sales experience within Well services would be an advantage</span></li><li><span>Sponsorship is not available therefore you must be eligible to work in Iraq without a visa</span></li></ul><p><span>Qualification:&nbsp;</span></p><br><ul><li><span><span>High School Diploma or Equivalent&nbsp;</span></span></li></ul><p><span><span>Preferred:</span></span></p><br><ul><li><span><span>Associate’s degree</span></span></li></ul><br> </div>

<p><h4>Job description</h4> <p><strong>Job title:</strong> Construction supervisor - mechanical & piping</p> <p><strong>Company:</strong> KBR</p> <p><strong>Location:</strong> Basra Iraq</p> <p><strong>Employment type:</strong> Full-time, contract</p> <p><strong>Rotation:</strong> 28/28</p> <p><strong>Required nationals:</strong> Local national</p> <h4>About company</h4> <p>Belong, connect, grow, with KBR! The KBR team delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</p> <p>KBR sustainable technology solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Roles and responsibilities</h4> <p>Specific responsibilities of the construction supervisor include:</p> <p><strong>Overall view of the role:</strong></p> <ul> <li>Contributes to construction safety by reducing site exposure through modularization, standardization, and maximizing off-plot construction.</li> <li>Contributes to developing brownfield/greenfield construction strategies and planning initiatives for project opportunities pre-FID.</li> <li>Focuses on addressing and removing hurdles to efficient construction and actively monitors productivity on site, advising (as per the instruction) from the construction lead and the construction manager on ways to improve the productivity metrics.</li> <li>Identifies and monitors brownfield/greenfield construction planning initiatives for approved projects post-FID.</li> <li>Coordinates with engineering, QA/QC, and HSE teams to ensure compliance.</li> <li>Works with the construction mechanical and piping lead and the construction manager to effectively execute construction deliverables for the project.</li> <li>Ability to effectively work on more than one project at a time and identify and resolve site issues efficiently.</li> <li>Experience in reading and understanding construction drawings (ISOs, GAD, and P&ID).</li> <li>Experience in reading and understanding LOSH, test packs, hydrotesting, flushing, and all pre-commissioning requirements.</li> <li>Coordinates with the contractor/subcontractor's day-to-day mechanical and piping construction activities at site, assembly, torquing, installation, reinstatement, and final completion of the subsystem, both brownfield and greenfield projects.</li> <li>Experience in rotating equipment construction activities including but not limited to the installation, managing the quality of the executed work, and alignment requirements till the mechanical completion stage.</li> <li>Wide experience in static mechanical construction activities, including but not limited to piping fabrication, good knowledge of preparing piping MTOs, weld maps, and sufficient experience for the piping quality requirements (NDT, PWHT, etc.).</li> <li>Strong experience in shutdown requirements, including but not limited to tie-ins and hook-up spools.</li> </ul> <h4>Accountabilities/expectations</h4> <ul> <li>Coordinate with all the team members, follow up daily with the construction lead he will be assigned to and the construction manager.</li> <li>Ensure that the project planning is deliverable from engineering and that contracts & procurement aligns with the construction and handover sequences.</li> <li>Ensure designs optimally use cold work, modularization, and off-plot construction to minimize on-site HSSE exposure.</li> <li>Ensure to follow the final/approved design during construction.</li> <li>Good knowledge of international standards (ASME, API, etc.).</li> <li>Strong understanding of safety/HSE regulations, procedures, and PTW system.</li> </ul> <h4>Education, skills & experience</h4> <p>BSc., university degree in mechanical engineering.</p> <p><strong>Experience and skillset:</strong></p> <ul> <li>Minimum 10-12 years’ construction experience in oil and gas-related projects with strong proof for piping and rotating roles.</li> <li>Strong leadership and teambuilding skills; supervisory experience.</li> <li>Experience in static and rotating equipment installation and alignment.</li> <li>Strong software skills including Microsoft Office, document websites, 3D module review, and preferably good knowledge of software design (AutoCAD).</li> <li>Strong level in English language to communicate properly with the team members and all stakeholders.</li> </ul></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Job Description: Senior Maintenance Technician – Water Cup Production Line Department: Engineering and Maintenance Industry: Packaged Water / Water Cup Manufacturing Employment Type: Full-time Number of Vacancies: 2 Reports To: Maintenance Supervisor Supervisory Responsibility: Shift maintenance team when assigned Preferred Nationality: Indian/Iranian Job Purpose Provide senior-level, hands-on maintenance support for high-speed thermoforming/Form-Fill-Seal water cup production lines.<br> The Senior Maintenance Technician will lead shift maintenance work, diagnose complex faults, perform precision adjustments, and support preventive and major maintenance activities.<br> Key Responsibilities Implement daily, weekly, monthly, and shutdown maintenance plans.<br> Lead technicians during scheduled maintenance and production-line breakdowns.<br> Diagnose complex mechanical faults and production-related machine problems.<br> Perform machine setup, changeovers, adjustment, alignment, and synchronization.<br> Inspect machine condition and identify developing faults before failure occurs.<br> Carry out preventive, corrective, and major maintenance activities.<br> Escalate recurring faults and support root-cause analysis.<br> Record completed work, findings, parts used, and follow-up actions.<br> Identify future maintenance requirements and critical spare-parts needs.<br> Monitor recurring component failures and recommend technical improvements.<br> Assist with installation, commissioning, and overhaul work when required.<br> Train mechanical technicians and selected production operators.<br> Coordinate with production personnel during adjustment and test runs.<br> Assume responsibility for the maintenance team when the supervisor is unavailable.<br> Follow food-safety, personal-safety, lockout/tagout, and housekeeping requirements.<br> Required Technical Experience Candidates must have practical experience across the complete thermoforming/FFS water cup process: Film feeding, tracking, tensioning, and alignment Heating-zone inspection and adjustment Thermoforming stations, molds, vacuum, and cooling Filling systems, pumps, valves, nozzles, and volume adjustment Lid-film feeding, tracking, and tension control Heat-sealing temperature, pressure, timing, and alignment Cutting, punching, and cup-discharge mechanisms Pneumatic cylinders, solenoid valves, regulators, and air systems Bearings, chains, sprockets, timing belts, shafts, and gearboxes Linear guides, conveyors, lubrication systems, and mechanical alignment Candidates must be able to troubleshoot: Poor or incomplete cup forming Film tracking and alignment problems Water leakage and inaccurate filling volume Weak, incomplete, or uneven sealing Cutting and punching defects Mechanical timing and synchronization problems Abnormal vibration, noise, and overheating Repeated stoppages and intermittent machine faults Experience with Thermonox, Beta-Pak, or technically similar high-speed machines is strongly preferred.<br> Required Qualifications Technical diploma or equivalent qualification in Mechanical Maintenance, Mechanical Engineering, Mechatronics, or a related field.<br> Minimum 5–7 years of direct experience on thermoforming/FFS cup production machines.<br> Ability to lead maintenance work during shifts and breakdowns.<br> Strong practical knowledge of precision fitting, alignment, and adjustment.<br> Ability to interpret machine manuals, drawings, and spare-parts diagrams.<br> Basic ability to prepare maintenance records and technical reports.<br> Ability to train and guide junior technicians.<br> Willingness to work shifts and respond to urgent breakdowns.<br> Critical Selection Requirement Applicants must have direct experience maintaining machines that form, fill, and seal plastic water cups.<br> Experience limited to bottled-water lines, RO systems, vehicles, buildings, utilities, or general factory maintenance does not meet the position’s core requirement.<br></span> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span> <span></span></span><p>We are looking for the right people — people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world’s largest providers of products and services to the global energy industry.</p><br><b>Job Duties</b> <br><p><span>The Construction Manager is responsible for the complete administration and organization of construction and field personnel and directs the field effort through the activities of his staff. &nbsp;</span></p><br> <p><span>He reports directly to the Project Manager.</span></p><br> <ul> <li><span>Contributes to Construction Safety by reducing site exposure through modularization, standardization and maximizing off plot construction. &nbsp;</span></li> <li><span>Contributes in the development of brownfield construction strategies and planning initiatives for project opportunities pre FID. &nbsp;</span></li> <li><span>Focusses on addressing and removing hurdles to efficient construction and actively monitors productivity on site, advising (acting on behalf of) the construction manager of ways to improve the productivity metrics.</span></li> <li><span>Identifies and monitors brownfield construction planning initiatives for approved projects post FID.</span></li> <li><span>Will input into enhancing the design, contracting strategy and execution planning all in consideration of constructability through input into HSE, cost, schedule and quality.</span></li> <li><span>Acts as the Construction interface from the point of project inception to the point the project starts field execution.</span></li> <li><span>Ability to effectively work on more than one project at a time.&nbsp;<br>&nbsp;<br><span><strong><em>Accountabilities/ Expectations</em></strong><em>:</em></span><br></span></li> <li><span>Coordinate with Project Engineer and EPCM Construction Management Team to bring a coordinated approach to the overall project scope, quality, cost and schedule expectations.</span></li> <li><span>Ensure that planning of the project deliverables from Engineering and Contracts &amp; Procurement is line with the construction sequence and further to the hand over sequence.</span></li> <li><span>Ensures designs make optimal use of cold work, modularization and off plots construction to minimize HSSE exposure on site.</span></li> </ul><br><br><b>Qualifications</b> <br><ul> <li>Skills are typically acquired through completion of an undergraduate degree in architecture, engineering, or business administration, preferred Engineering branches., i.e. Mechanical, Civil, electrical, chemical, or equivalent.</li> <li>5 years of experience in project management which includes experience in facility construction or remodeling and management experience.</li> </ul> <p><strong>Preferred Experience:</strong><br>&nbsp;<br>• &nbsp; &nbsp;Minimum 15 years experience in &nbsp;Oil and Gas related project Design and Engineering&nbsp;<br>• &nbsp; &nbsp;Minimum 10 years experience in &nbsp;Oil and Gas Project Delivery as a Umbrella Contract &nbsp;Construction Manager function in a multidiscipline Workforce &nbsp;<br>• &nbsp; &nbsp;Experience in Productivity measurement resource based planning (Level 4 Scheduling)&nbsp;<br>• &nbsp; &nbsp;Strong Managerership and teambuilding skills&nbsp;<br>• &nbsp; &nbsp;Supervisory experience&nbsp;</p><br><br><br><br><p><strong>Halliburton is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation</strong>.</p><br> <p><strong><u>Location</u></strong></p><br> <p>Oils Opertion ST,N°29 Burjesia,&nbsp;Basra,&nbsp;Basrah,&nbsp;61006, Iraq</p><br> <p><strong><u>Job Details</u></strong></p><br> <p><strong>Requisition Number:</strong>&nbsp;211573&nbsp;&nbsp;<br><strong>Experience Level:&nbsp;</strong>Experienced Hire&nbsp;<br><strong>Job Family:</strong>&nbsp;Support Services&nbsp;<br><strong>Product Service Line:&nbsp;</strong>Halliburton Project Management&nbsp;&nbsp;&nbsp;<br><strong>Full Time / Part Time:&nbsp;</strong>Full Time</p><br> <p><strong>Additional Locations for this position:&nbsp;</strong></p><br> <p><u><strong>Compensation Information</strong></u><br>Compensation is competitive and commensurate with experience.</p><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span> <span></span></span><p>We are looking for the right people — people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world’s largest providers of products and services to the global energy industry.</p><br><b>Job Duties</b> <br><ul> <li>Under broad direction from the Senior Petrophysics Advisor and the IAM leadership and with support from engineering and operations staff across all Halliburton product service lines (PSLs), the Petrophysics Advisor works within a senior, multi-discipline petrotechnical team to develop and apply</li> <li>advanced formation evaluation techniques in support of the evaluation and development of potentially large and challenging oil and gas field development projects for potential investment by IAM.</li> <li>The Petrophysics Advisor will support Technical Asset Team evaluation work by providing both qualitative and quantitative analysis of data relevant to formation evaluation and reservoir characterization.</li> <li>This evaluation work will require integration of information derived from various sources including open and cased hole well logs, mud logs, sidewall cores, full cores, RFT/MDT pressure test/fluid samples, mini-fracs, Diagnostic Fracture Injectivity Tests, and geochem analysis.</li> <li>Additionally, the role will also perform advanced geomechanics evaluation in order to make predictions related to wellbore stability assessment, formation sanding potential, pore pressure prediction, principal present-day stress analysis, and mechanical property determination useful in defining barriers to hydraulic fracture growth.</li> <li>Additional responsibilities for this role include supporting Technical Asset Team senior management in defining standardized, best practice processes to support systematic yet efficient and effective evaluation, well engineering, and field development planning work required as part of the project development process.</li> <li>The Petrophysics Advisor will participate in formal brainstorming workshops with other key Halliburton technical resources and research, prepare and present technical publications.&nbsp;</li> </ul><br><br><b>Qualifications</b> <br><p>Requires an undergraduate degree in petroleum engineering or geology and a minimum of 10 years of experience in petrophysical evaluation, which includes experience in oil &amp; gas operators, service companies or consulting companies.</p><br><br><br><br><p><strong>Halliburton is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation</strong>.</p><br> <p><strong><u>Location</u></strong></p><br> <p>Oils Opertion ST,N°29 Burjesia,&nbsp;Basra,&nbsp;Basrah,&nbsp;61001, Iraq</p><br> <p><strong><u>Job Details</u></strong></p><br> <p><strong>Requisition Number:</strong>&nbsp;210427&nbsp;&nbsp;<br><strong>Experience Level:&nbsp;</strong>Experienced Hire&nbsp;<br><strong>Job Family:</strong>&nbsp;Engineering/Science/Technology&nbsp;<br><strong>Product Service Line:&nbsp;</strong>Halliburton Project Management&nbsp;&nbsp;&nbsp;<br><strong>Full Time / Part Time:&nbsp;</strong>Full Time</p><br> <p><strong>Additional Locations for this position:&nbsp;</strong></p><br> <p><u><strong>Compensation Information</strong></u><br>Compensation is competitive and commensurate with experience.</p><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <strong>Job Title- Piping / Mechanical Construction Supervisor&nbsp;<br> Location- Anbar, Iraq<br> Rotation - 6/3</strong> <strong>Role purpose:</strong> Lead and coordinate all <strong>piping &amp; mechanical construction</strong> activities on site, ensuring <strong>safe execution</strong>, <strong>schedule adherence</strong>, and <strong>quality compliance</strong> across the construction-to-commissioning phases.<br> <strong>Must-have responsibilities</strong><ul><li>Manage day-to-day <strong>piping &amp; mechanical construction execution</strong> on site, including <strong>subcontractor supervision</strong> and work-front coordination.</li><li>Ensure work is executed per <strong>Approved For Construction (AFC)</strong> drawings, project specs, and latest document revisions (strong <strong>engineering–site interface</strong>).</li><li>Control key construction interfaces: <strong>free-issue materials</strong>, major equipment/packages receipt and correct installation.</li><li>Drive <strong>HSE compliance</strong>: manage/verify <strong>PTW</strong>, <strong>isolations</strong>, and <strong>LOTO</strong> requirements; ensure safe working practices and hazard controls.</li><li>Monitor <strong>construction progress vs schedule</strong>, report daily status/forecast, and highlight constraints/deviations with corrective actions.</li><li>Ensure <strong>quality compliance</strong>: coordinate with piping/mechanical QA/QC; manage inspection readiness, resolve NCR drivers, and verify subcontractor workmanship.</li><li>Support <strong>mechanical completion / CCMS</strong> completion activities and <strong>commissioning assistance</strong> as required.</li><li>Manage <strong>as-built documentation</strong> from subcontractors.</li></ul><strong>Must-have experience / qualifications</strong><ul><li><strong>Bachelor Degree in Mechanical Engineering</strong> (or closely related).</li><li><strong>10+ years</strong> proven experience as <strong>Piping / Mechanical Supervisor</strong> on <strong>Oil &amp; Gas EPCC projects</strong> (construction through commissioning exposure).</li><li>Strong working knowledge of <strong>PTW</strong>, <strong>LOTO</strong>, isolations, and site safety rules.</li><li>Strong understanding of <strong>piping/mechanical erection</strong>, installation practices, and construction planning/resource allocation.</li><li>Ability to coordinate across disciplines (basic understanding of <strong>civil, E&amp;I, instrumentation</strong> interfaces).</li><li>Strong leadership, contractor management, and communication skills (client/subcontractor/site team).</li></ul><br>With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil &amp; Gas, Power &amp; Renewables, Chemicals, Construction &amp; Infrastructure, Life Sciences, Mining and&nbsp;Manufacturing&nbsp;sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients. <br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Maintenance Advisor<br><br><p><b>Job Title: Maintenance Advisor</b></p><br><br><br><p><u><b>Overview</b></u></p><br><br><p>As Maintenance Advisor, you will play a key role in enabling safe, reliable, and efficient maintenance execution at site. Acting as the main interface between the ROO and BOC maintenance teams and site operations, you will guide priorities, coach national staff, and ensure effective work management. Your influence, collaboration, and technical leadership will support timely execution of planned and unplanned maintenance while ensuring strong safety and compliance standards.</p><br><br><br><p><u><b>K</b><b>ey </b><b>Responsibilities</b></u></p><br><br><p><b>Leadership</b></p><br><br><p>Promotes a culture of open safety reporting, continuous improvement, and shared respect across a diverse workforce. Encourages team engagement and promote accountability aligned with ROO’s values and behaviours.</p><br><br><br><p><b>Risk / Operating Discipline&nbsp;</b></p><br><br><p>Accountable for the safe execution of all maintenance activities, ensuring strict adherence to safety standards and risk management protocols. Maintains zero tolerance for overdue maintenance, particularly SCEs and anomalies, and ensures high-quality deferral processes.</p><br><br><br><p><b>Maintenance Execution</b>&nbsp;</p><br><br><p>Accountable for effective and efficient asset maintenance across multi-discipline activities, including Preventive (PM) and Corrective Maintenance (CM). Conducts daily validation and maintenance planning meetings to ensure timely prioritization and approval of work. Leads compliance with standardized Work Management processes, including deferral management and risk mitigation. Oversees contractor-executed tasks by reviewing CTRs for scope quality, cost, resource utilization, materials, and duration. Manages scaffolding needs by initiating requests and ensuring prompt dismantling after completion. Maintains up-to-date records in the O&amp;M tracker and supports reporting accuracy. Owns and maintains the ROO choke model for assigned sites to ensure plant vulnerabilities are understood, tracked, and addressed. Drives plant and equipment availability and supports reliability improvement initiatives, ensuring RCFA actions are followed through to closure.</p><br><br><br><p><b>People</b></p><br><br><p>Coaches and develops direct reports to support the nationalisation agenda, ensuring timely delivery of personal development plans aligned with the nationalisation plan.</p><br><br><br><p><b>Delivery, Optimization &amp; Reliability</b></p><br><br><p>Recommends execution optimization opportunities to the METL and manages the 12-week maintenance activity schedule, deciding what enters the 2-week execution window. Ensures nesting of activities and addresses risks before scheduling, supports timely change management (MOC) and Engineering Queries to meet business objectives. Assists operations in returning plant to safe operation post-interventions, ensuring timely closeout of GOC paperwork, walkdowns, and PSSR sign-offs. Champions continuous improvement by standardizing best practices, optimizing maintenance strategy, materials staging, and maintenance build. Inputs and manages maintenance budgets for site TAR and train outages.</p><br><br><br><p><b>Experience, Qualifications &amp; Key Skills</b></p><br><br><ul><li>Over 15 years’ oil &amp; gas experience, ideally with IOCs,&nbsp;</li><li>Technical degree or HNC in engineering,&nbsp;</li><li>Previous experience in Maintenance Lead or Superintendent roles,&nbsp;</li><li>Strong knowledge of maintenance planning, scheduling, and CMMS (Maximo),&nbsp;</li><li>Proven leadership of multi-discipline, multicultural teams,&nbsp;</li><li>Skilled in hazard identification, communication, and priority setting,&nbsp;</li><li>Results-driven with focus on continuous improvement,&nbsp;</li><li>Experience in diverse, multilingual environments preferred.</li></ul><br><p><b>Interfaces</b></p><br><br><p>Collaborate closely with Maintenance Execution Team Leader, Scheduler, Coordinators, Work Prep Specialists, Site Operations, Planning, BOC execution teams, OTL, Operations and Discipline Advisors, Service Providers, PSCM/Materials, and HSE teams to ensure safe, efficient completion of maintenance activities, projects, and emergencies.</p><br><br><br><p><b>Procedures and Processes</b></p><br><br><p>The MA must have strong knowledge of key ROO procedures including Work Management &amp; CMMS (with deferral process), Activity Planning and Scheduling, CTR procedures, Control of Work (HWNF, ORA, SORA, Containment, Ground Disturbance, CSE), MOC/EQ process, and GOC.</p><br><br><br><p><b>Summary of Decision Rights</b></p><br><br><p>The MA is responsible for stopping unsafe work or plant operations (with escalation to the Site Engineer or higher when necessary), recommends priority maintenance tasks to ensure safety and reliability, decides which activities enter the 2-week execution schedule, supports MC competency development, contributes to vulnerability assessments, and advises on prioritization of CoW and SIMOPS.</p><br><br><br><p><b>Meetings to Attend</b></p><br><br><ul><li>Daily: Morning Maintenance, Site Engineer prioritization, Work Order validation, Afternoon Ops &amp; Maintenance meetings</li><li>Weekly: Team meeting, Bi-weekly planning meeting&nbsp;</li><li>Fortnightly: 12-Week Schedule meeting&nbsp;</li><li>Monthly: Vulnerabilities meeting&nbsp;</li><li>Ad Hoc: TAR Bookies Board, TAR Ops, Projects Ops &amp; Safety Review, Production Losses, and other required meetings.</li></ul><br><br><br> </div>

<p>The Disposal operator will be based at Amentum Baghdad Embassy Compound (BEC) in Baghdad, Iraq, and serve the Base Life Support Services contract in support of the State Department. This position will report to the Disposal Yard Manager.</p><p>DUTIES:</p><ul><li>Responsible for maintaining a safe workplace and ensuring that safety is the highest priority in the workplace.</li><li>Comply with all Environmental Health &amp; Safety and Quality Assurance requirements and goals.</li><li>Provide information and materials to these divisions as necessary to ensure adequate and legal documentation.</li><li>Ensures data accuracy and update of equipment inventory database.</li><li>Ensure that related data related to activities meet the requirements.</li><li>Process excess documentation for all controlled and non-controlled excess equipment and materials.</li><li>Review, reconcile, adjust and process all inventory transactions.</li><li>Process and coordinate Equipment Transfers.</li><li>Assist in a broad scope of direct and indirect support activities involving customer owned equipment as necessary to complete assigned tasks.</li><li>Conduct daily inspections of assigned equipment and immediately report defects or maintenance requirements.</li><li>Assist with scrap metal processing and preparation for disposal or recycling.</li><li>Assist in contingency waste removal operations during emergencies, special events, or increased operational requirements.</li><li>Perform additional duties and projects assigned.</li></ul><p>Physical Requirements</p><ul><li>Frequently lift and carry materials weighing up to 25 kg.</li><li>Stand, walk, bend, climb, kneel, and work for extended periods.</li><li>Operate manual and powered equipment safely.</li><li>Work in dusty, noisy, and outdoor environments.</li><li>Wear required PPE, including safety boots, gloves, eye protection, hearing protection, and reflective clothing.</li></ul><p>Working Conditions</p><ul><li>Outdoor and industrial work environment.</li><li>Exposure to heat, dust, noise, and moving equipment.</li><li>May be required to work overtime, weekends, holidays, or emergency callouts to support mission requirements.</li></ul><p>Performance Expectations</p><ul><li>Complete disposal operations safely, efficiently, and on schedule.</li><li>Maintain high standards of cleanliness throughout assigned work areas.</li><li>Ensure waste is properly segregated and disposed of in accordance with environmental requirements.</li><li>Demonstrate reliability, professionalism, accountability, and teamwork while supporting mission operations.</li></ul><p>DESIRED:</p><ul><li>Previous out of home country experience and previous work experience in harsh environmental conditions are a plus.</li><li>Experience supporting Department of State.</li><li>Experience working with Amentum.</li></ul><p>OTHER KNOWLEDGE, SKILLS AND ABILITIES:</p><ul><li>Knowledge of the principles and processes involved in Quality Control Management.</li><li>Successful management of multiple sites in geographically dispersed locations.</li><li>Ability to collect, analyze and summarize data and to prepare clear and concise reports.</li><li>Experience in effectively dealing with international and headquarters staff, and sensitivity to other cultures.</li><li>Exercise sound judgment and make decisions independently.</li><li>Excellent organizational and time management skills, with the ability to handle multiple tasks and administrative details in a fast paced and constantly changing environment. Expert communication skills to facilitate and disseminate information.</li></ul><p><br></p><p><strong>Desired Candidate Profile</strong></p><ul><li>Minimum 4 or more years experience handling waste management and disposal activity.</li><li>Previous experience in waste management, sanitation, logistics, construction support, or material handling preferred.</li><li>Ability to operate or learn Disposal collection equipment and material handling equipment.</li><li>Ability to communicate effectively with supervisors and team members.</li><li>Prior proven experience in Property Disposal operations with Defense Reutilization</li><li>Experience operating heavy equipment to include up to a 30K Forklift, Extended reach Forklift, Material Handler, Grappler (Excavator), Front End Loader and Material Shredders.</li><li>Experience with cutting torches to include Plasma cutters.</li><li>Commitment to maintaining a high-performance team which delivers customer service excellence.</li><li>Knowledge of principles and processes involved in supporting contract responsibilities at an overseas facility.</li><li>Ability to work in a fast-paced environment requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules.</li><li>Cross-cultural sensitivity with an international perspective.</li><li>Excellent organizational and time management skills.</li><li>Computer skills, specifically in Microsoft Word and Excel.</li><li>Ability to become an active and functioning member of a team.</li><li>Ability to be innovative and be an agent for change.</li><li>Ability to prioritize multiple tasks in a fast-paced operational environment.</li><li>Basic recordkeeping and reporting skills.</li><li>A high school diploma or GED (General Education Diploma) Certifications or 4 years substitute experience in waste management and disposal services will be acceptable.</li><li>Valid Iraqi driver s license (if operating company vehicles).</li><li>Security Vetting: Already possess a RSO issued security clearance or be able to obtain a favorable RSO issued clearance prior to being hired is required for the position. Must maintain eligibility at the required certification or clearance level for the duration of the contract.</li><li>Language Skills: Satisfactory English and Arabic proficiency to meet job requirements and to adhere and comply with safety, health, and security measures.</li><li>Medical: Successfully complete and pass the medical and drug examinations as required by Amentum and our customer for deployment to Iraq. Must maintain physical and drug requirements for duration of deployment.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br>Company Description<br><br><p>Wellington’s largest economy hotel within walking distance to the capital’s largest venues, Takina, Te Papa, TSB and Sky Stadium. This robust hotel offers consistency and efficiency for large groups with generous vibrant Vivant restaurant dining spaces, offering a big buffet breakfast, and a la carte lunch and dinner.</p><br><br>Job Description<br><br><p>We are seeking a skilled and detail-oriented CDP Butchery professional to join our meat processing team in Baghdad, Iraq. In this role, you will be responsible for butchering, processing, and preparing high-quality meat products while maintaining the highest standards of food safety and hygiene. You will work efficiently in a fast-paced environment, utilizing specialized equipment and techniques to deliver consistent, quality results that meet our customers' specifications and expectations.</p><br><ul><li>Butcher and process meat products using industry-standard tools and techniques with precision and efficiency</li><li>Prepare meat cuts according to customer specifications and quality standards</li><li>Maintain strict food safety and hygiene protocols in compliance with local and international regulations</li><li>Operate and maintain butchery equipment, ensuring all tools are clean, sharp, and properly sanitized</li><li>Manage inventory by monitoring stock levels, rotating products using FIFO (First In, First Out) methods, and minimizing waste</li><li>Organize and maintain a clean, organized workspace that meets health and safety requirements</li><li>Perform quality control checks on all meat products before packaging and distribution</li><li>Follow proper handling and storage procedures for all meat products, particularly in cold storage environments</li><li>Collaborate with team members to meet daily production targets and deadlines</li><li>Report any equipment malfunctions or food safety concerns to management immediately</li></ul><br>Qualifications<br><br><ul><li>Proven experience in butchery, meat processing, or a related food production role</li><li>Strong knowledge of food safety regulations and best practices in meat handling</li><li>Proficiency with butchery tools, equipment, and machinery (saws, grinders, slicers, etc.)</li><li>Solid understanding of different meat grades, cuts, and processing techniques</li><li>Excellent attention to detail and commitment to quality standards</li><li>Physical stamina and dexterity to perform repetitive tasks in a cold environment</li><li>Strong time management and organizational skills</li><li>Ability to work efficiently in a team-oriented environment</li><li>Preferred: Food handling or food safety certification</li><li>Preferred: Experience with meat grading systems and classification standards</li><li>Preferred: Supervisory or mentoring experience in a butchery or food production setting</li></ul><br>Additional Information<br><br><p><strong>Our commitment to Diversity &amp; Inclusion:</strong></p><br><p>We are an inclusive company and our ambition is to attract, recruit and promote diverse talent.<br>&nbsp;</p><br> </div>

<p><h4>Duties</h4> <p>Provide information and materials to these divisions as necessary to ensure adequate and legal documentation.<br> Ensure Property Department compliance with Property Management and Control Procedures.<br> Conduct random compliance audits on all sites and departments in Iraq.<br> Develop and execute corrective action plans for audit deficiencies and inventory accountable property.<br> Mentor lower-level Property Staff and custodians in proper process and procedures as they relate to Government Property.<br> Identify problem areas and recommend viable solutions.<br> Perform physical inventories of Government Furnished Property (GFP) and Contractor Acquired Property (CAP), as directed by the Property Management and Control Procedures and/or the Logistics and Property Manager.<br> Ensure Government Property Identification numbers (GP) are properly assigned, prepare required schedule, and assist with identifying lost, damaged, and destroyed property as well as excessive consumption.<br> Work closely with Property Custodians to ensure overall accountability of assets.<br> Track and record movement of all types of Government property. This includes movement from one point to another within a contractor’s facility, movement between facilities for any purpose, and protection during movement.<br> Conduct country-wide Property Training on a yearly basis as well as establish training plans for new hire employees and refresher training.<br> Ensure compliance with Federal Acquisition Regulation (FAR), Statement of Work (SOW), and Standard Operating Procedures (SOP).<br> Develop processes and desktop procedures to maintain continuity of job performance.<br> Audit logs and status records to ensure completion of lost, damaged, or destroyed items.<br> Check LTDD packages for accuracy and completion.<br> Perform additional duties and projects as qualified to perform as assigned.<br> Responsible for maintaining a safe workplace and ensuring that safety is the highest priority in the workplace.<br> Comply with all Environmental Health & Safety and Quality Assurance requirements and goals.</p> <h4>Required</h4> <p><strong>Minimum acceptable experience level:</strong> Five years’ experience with overseas Government contracts. Department of State contracts strongly preferred.</p> <p><strong>Knowledge, skills, and abilities:</strong><br> Knowledge of FAR and industry leading practices regarding government property.<br> Ability to clearly and concisely articulate services and requirements in writing.<br> Ability to articulate in a clear and concise manner with Management and Trades Departments daily.<br> Ability to demonstrate analytical and researching skills.<br> Ability to perform the technical requirements efficiently and effectively.<br> Ability to define problems, collect data, and propose solutions.<br> Ability to read, interpret, and follow all Logistic Management procedures, policies, and guidelines.<br> Ability to effectively present information and respond to questions.<br> Excellent organizational and time management skills, with ability to prioritize effectively and work with a sense of urgency.<br> Ability to lift materials and equipment weighing up to 50 lbs.<br> Ability to work in a fast-paced environment that requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules.<br> Understanding how inventory affects compensation.<br> Knowledge of principles and processes involved in supporting contract responsibilities at an overseas facility.<br> Cross-cultural sensitivity with an international perspective.<br> Computer skills, specifically in Microsoft Word and Excel.<br> Ability to become an active and functioning member of a team.<br> Ability to be innovative and be an agent for change.<br> Expert communication skills to facilitate and disseminate information.</p> <p><strong>Education:</strong><br> An undergraduate degree is preferred but can be replaced with additional years of Government Property Administration experience.</p> <p><strong>Licenses and certifications:</strong><br> Valid driver’s license from home of record.<br> NPMA Certification or ability to obtain within one year.</p> <p><strong>Security vetting:</strong><br> Possessing a Moderate Risk Public Trust (MRPT) or be able to obtain a favorable MRPT certification prior to being hired is required.</p> <p><strong>Language skills:</strong><br> Sufficient English proficiency to meet job requirements and to adhere and comply with safety, health, and security measures.</p> <p><strong>Medical:</strong><br> Successfully complete and pass the medical and dental examinations as required for deployment. Must maintain physical and dental requirements for duration of deployment.</p> <h4>Desired</h4> <ul> <li>Previous out of home country experience and previous work experience in harsh environmental conditions are a plus.</li> <li>Experience working with the company.</li> </ul> <h4>Other responsibilities</h4> <p><strong>Safety:</strong> Enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. Each employee is responsible for completing all training requirements and fulfilling all self-aid and buddy aid responsibilities, participating in emergency response tasks, and serving on safety committees and teams as appropriate.</p> <p><strong>Quality:</strong> Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the Quality Policy and carry out job activities in compliance with applicable Quality System documents and customer contracts. Each employee must read and understand his or her Quality Management and Customer Satisfaction responsibilities.</p> <p><strong>Procedure compliance:</strong> Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to the job.</p> <h4>Working and living conditions</h4> <p>This position may be in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environments. Temperatures can reach 120 to 130 degrees Fahrenheit (50 to 55 degrees Celsius) during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy for extended periods. Work schedules are a minimum of six days per week and 10 hours per day, while some jobs have higher daily and weekly minimums. Employees must be willing and able to perform physical activities including, but not limited to, heavy lifting and moving of items, parts, assemblies, and equipment up to the safety regulation maximum; climbing in and out of equipment; crawling; and working outdoors. This includes being able to lift and carry 40 pounds of personal protective equipment for extended periods of time and being capable of running and ‘duck and cover’ during emergencies without putting oneself or others at risk.</p></p><p></p>

<p><h4>Duties</h4> <p>Responsible for maintaining a safe workplace and ensuring that safety is the highest priority in the workplace.<br> Comply with all Environmental Health & Safety and Quality Assurance requirements and goals. Provide information and materials to these divisions as necessary to ensure adequate and legal documentation.<br> Order fuel from commercial sources.<br> Monitor fuel levels and re-order points.<br> Maintain close coordination with fuel sub-contractor and U.S. Department of State administrative personnel to obtain correct documentation for fuel delivery.<br> Track fuel, food, and material shipments.<br> Process fuel delivery receipts and update records.<br> Liaise with the Logistics Management Center (LMC) to submit official State Department letters to Oil Product Distribution Center to maintain the monthly fuel allocation.<br> Provide the LMC staff with verbal translations from State Department to officials located at multiple Government of Iraq offices.<br> Perform additional duties and projects as assigned.</p> <h4>Required</h4> <p>Minimum acceptable experience level: One (1) year’s experience in fuels and logistics services.</p> <p><strong>Knowledge, skills, and abilities:</strong></p> <ul> <li>Complete understanding of the general aspects and technical phases of the job and their practical applications and situations ordinarily encountered.</li> <li>Knowledge and understanding of fuel testing procedures and fuel testing equipment.</li> <li>Complete understanding of safe fuel handling practices.</li> <li>Familiar with set fuel quality standards and the required testing used to establish fuel conformance.</li> <li>Knowledge of principles and processes involved in supporting contract responsibilities at an overseas facility.</li> <li>Ability to work in a fast-paced environment that requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules.</li> <li>Cross-cultural sensitivity with an international perspective.</li> <li>Excellent organizational and time management skills.</li> <li>Proficient computer skills, specifically in Microsoft Word and Excel.</li> <li>Ability to become an active and functioning member of a team.</li> <li>Ability to be innovative and be an agent for change.</li> <li>Expert communication skills to facilitate and disseminate information.</li> </ul> <p><strong>Education:</strong> A high school diploma or GED.</p> <p><strong>Licenses and certifications:</strong> Valid driver’s license from home of record.</p> <p><strong>Security vetting:</strong> Must obtain a favorable RSO certification as required by the position. Must maintain eligibility at the required security level for the duration of the contract.</p> <p><strong>Language skills:</strong> The selected candidate must be fluent in Arabic and English (both written and spoken).</p> <p><strong>Medical:</strong> Favorable passage of a drug screen and physical examination.</p> <h4>Desired</h4> <ul> <li>Previous out of home country experience is highly desirable and previous work experience in harsh environmental conditions is a plus.</li> <li>Experience working with Amentum.</li> </ul> <h4>Working and living conditions</h4> <p>This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environment. Temperatures can reach 120-130 degrees Fahrenheit/50-55 degrees Celsius during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to Iraq for extended periods. Work schedules are a minimum of 6 days per week and 10 hours per day, while some jobs have higher daily and weekly minimums. Employees must be willing and able to perform physical activities including, but not limited to, heavy lifting and moving of items, parts, assemblies, and equipment up to the safety regulation maximum; climbing in and out of equipment; crawling; and working outdoors. This includes being able to lift and carry 40 pounds of personal protective equipment for extended periods of time and being capable of running and ‘duck & cover’ during emergencies without putting oneself or others at risk.</p> <p>We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law.</p> <p>Amentum is a drug-free workplace.</p></p><p></p>

<p>Welder is responsible for cutting, shaping and putting together a variety of different things related to metalwork and piping and will operate appropriate equipment to put together mechanical structures or parts with a great deal of precision. Welder carries various welding tasks including preparation and execution of welding joint as per welding procedure/system within safety and quality requirements. You may be assigned other duties to help proactively drive our FieldCore vision and align with our organization s core values.</p><p><strong>Essential Duties &amp; Responsibilities:</strong></p><ul><li>Correct tools for proper execution of the work.</li><li>Must be proficient in understanding mechanical drawings.</li><li>While in the work place, responsible for both quality, and safety.</li><li>Capable of using hand grinders to grind weld back to original shape and contour.</li><li>Review quality documents as required.</li><li>Operate and have knowledge of heating torches such as oxy-acetylene and gas torches</li><li>Perform other duties as assigned</li><li>Travel extensively (internationally and domestically)</li><li>Ability and willingness to work holidays, weekends and overtime as required by field assignments</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>High School Diploma or GED (US)</li><li>Comply with ISO certification requirements.</li><li>Experience of power generation (gas/steam turbines) and associated auxiliary equipment is preferable.</li><li>Qualified level.</li><li>Able to successfully perform all requirements of the job properly.</li><li>Possess advanced skills and applies the fundamental concepts, practices and procedures of a particular field of specialization.</li><li>Have the ability to effectively operate jacking fixtures/porta power, cranes, forklifts oxygen and acetylene torches/propane</li><li>Experience in welding/grinding of Turbine components and Tig Welding.</li><li>Excellent customer, communication, and interpersonal skills</li><li>Ability to work independently and complete multiple projects within time constraints</li><li>Strong organizational skills</li><li>English proficiency required</li></ul>