Heavy equipment mechanical engineer Jobs

<p>The Non-Destruction Inspection Technician (NDI) II inspects aerospace weapon systems components and support equipment for structural integrity using nondestructive inspection methods and performs fluid analysis.</p><p>• Determine test method and prepare fluids and parts for nondestructive inspection.</p><p>• Interpret nondestructive inspection test results and provide information about defects to repair center.</p><p>• Analyze wear metal content reports on engine lubricating oil and other fluids and recommend corrective action.</p><p>• Establish radiation areas for radiographic operations.</p><p>• Compute and monitor personal exposure areas for radiographic operations, and monitor personnel exposure data.</p><p>• Perform nondestructive inspection on structures, components, and systems.</p><p>• Detect flaws such as cracks, delamination s, voids, processing defects, and heat damage using penetrate testing, eddy current, magnetic particle, radiographic, optical, and ultrasonic test equipment.</p><p>• Determine metallurgical information of components according to alloy, temper, conductivity, and associated factors.</p><p>• Operate, maintain, and inspect nondestructive equipment.</p><p>• Perform operator maintenance and service inspections on shop equipment and tools.</p><p>• Ensure lock out and tag out procedures are accomplished prior to maintenance on equipment.</p><p>• Perform silver recovery functions.</p><p>• Handle and dispose of hazardous waste and materials.</p><p>• Perform other qualified duties as assigned.</p><p>Knowledge &amp; Skills</p><p>• Previous experience in the maintenance, modification and repair of tactical aircraft systems of the type being serviced and their associated components (UH60, AH64, CH47).</p><p>• Have the skills and knowledge to set up and standardize equipment, conduct tests, interpret and evaluate for acceptance or rejection, and document.</p><p>• Thoroughly familiar with the scope and limitations of the technique/method in which they are certified.</p><p>• Capable of providing the necessary guidance and supervision to trainers and Level I personnel in the technique/method in which they are certified.</p><p>• Familiar with the codes, standards, and other contractual documents that control the method as utilized by the employer.</p><p>• Capable of developing written instructions from approved general procedures. Such instructions shall require final approval by a Level III.</p><p>• Knowledge of electrical, mechanical, electronic, hydraulic and pneumatic systems or other technology as applicable to fabrication, repair, operation and maintenance requirements.</p><p>• Efficient in record keeping and preparation of reports; capable of reviewing other people's work and determining accuracy and conformity to standards.</p><p>• Proficient in the use of the Unit Level Logistics System-Aviation Enhanced (ULLS-AE), the current maintenance management system utilized to maintain Army aircraft forms and records.</p><p>• Comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components.</p><p>• Thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems.</p><p>• Detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. is required.</p><p>• Ability to provide technical support to structural/mechanical engineers and customers.</p><p>• Excellent organizational skills in prioritizing workload to meet aircraft delivery schedule.</p><p>Physical Requirements/Working Environment</p><p>• Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day</p><p>• Must be able to climb stairs, ramps, ladders, and work stands</p><p>• Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders</p><p>• May be required to lift heavy objects whose weight may exceed 50 pounds</p><p>• Must be able to type using a standard keyboard to communicate through e-mail and various software applications</p><p>• Will handle dirty parts and lubricants</p><p>• Will be required to wear proper Personal Protective Equipment (PPE)</p><p>• Must be able to pass a Respirator Physical and Fit Test qualification</p><p>• May be required to operate power vehicles, machinery, hand tools, ground support equipment, fork lift, etc.</p><p>• Must be able to lift/push/pull minimum of 50 pounds</p><p>• May work in maintenance shop or outside</p><p>• Must be able to work in a shop where the environment is drafty, noisy, and dirty</p><p>• May be exposed to extreme noise from operating equipment</p><p>• May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</p><p><strong>Desired Candidate Profile</strong></p><p>Minimum Requirements :</p><ul><li>High school diploma or equivalent required.</li><li>U.S. military technical school or specialized training course is desired, certification of education level is required.</li><li>Completion of a initial Non Destructive Inspection Level II training Course and current basic qualification.</li><li>Three (3) or more years experience as an aviation inspector and a minimum of one year experience on the assigned(MDS) airframe . (UH60, AH64, CH47 )</li><li>Shall be trained and qualified per NAS 410 or ASNT-CP-189 to the level assigned.</li><li>Must be in possession of a U.S. Passport with 3 years of validity remaining at the time of hire and be able to travel internationally.</li><li>Ability to obtain and maintain a US Government Security Clearance, NAC-I T1 Public Trust.</li><li>** US Citizenship is required to obtain a T1/CAC NACI Clearance.</li><li>Able to clear CENTCOM Medical requirements for deployment.</li><li>Ability to obtain and maintain Iraq Visa</li></ul>

<p><h4>Essential responsibilities (but not limited to):</h4> <p>Perform launch, recovery, scheduled and unscheduled inspections/maintenance.<br> Preflight/thru flight/BPO inspections, ground handling, minor maintenance, and servicing.<br> Perform routine troubleshooting, installation, repair and maintenance of all electro-mechanical systems and components on the aircraft at the organizational level of maintenance.<br> Services aircraft. Performs end-of-runway, post-flight, preflight, thru-flight, and phase inspections.<br> Troubleshoots and maintains aircraft structures, systems, components, and related equipment. Removes and installs aircraft components.<br> Performs inspections, scheduled and unscheduled maintenance on the company aircraft in accordance with FAA regulations, manufacturer and company maintenance manuals and procedures.<br> Services, operates, and maintains ground support equipment and performs interior and exterior cleaning of aircraft and work areas. Must precisely complete all maintenance documentation.<br> Perform all other position related duties as assigned or requested.</p> <h4>Minimum position knowledge, skills, and abilities required:</h4> <ul> <li>Must have a current FAA Airframe and Powerplant (A&P) license in good standing.</li> <li>At least four (4) years of directly related heavy aircraft maintenance experience is highly desired. Experience must include complying with all applicable aircraft servicing procedures, aircraft maintenance manuals and parts catalogs.</li> <li>Experience with OBOGS systems and T-6 life support required.</li> <li>2.5 years Textron T6 Texan II aircraft maintenance experience within the last 5 years required.</li> <li>Must read, interpret and use manufacturers and aircraft maintenance manuals, service bulletins, blueprints, wiring/schematic diagrams, data tables and other specifications to determine feasibility and method to repair or replace malfunctioning or damaged components.</li> <li>Must be able to inspect, repair, and operate ground support and auxiliary equipment.</li> <li>Possess a current state issued driver’s license.</li> <li>Must be able to obtain and maintain U.S. passport for facility credentials/authorization. Note: U.S. citizenship is required for facility credentials/authorization at this work site.</li> </ul> <h4>Work environment, physical demands, and mental demands:</h4> <ul> <li>Must possess the ability to carry and lift overhead up to 50 pounds.</li> <li>Duties include walking, climbing, standing, stooping, stretching, and squatting for purposes of moving equipment, boarding and de-boarding the aircraft, performing maintenance using ladders, and performing maintenance atop and below aircraft.</li> <li>Must be able to work at high altitudes when performing flight attendant duties.</li> <li>Work is primarily performed outside in a high-level noise environment.</li> <li>Performing maintenance in low-light areas, operating support equipment after daylight hours. Work is occasionally performed in inclement weather.</li> </ul></p><p></p>

<p><h4>Essential Responsibilities</h4> <p>The air crew life support technician will perform inspections, maintenance and troubleshooting tasks on T-6A aircraft.</p> <p>Responsibilities include but are not limited to:</p> <ul> <li>Perform launch, recovery, scheduled and unscheduled inspections/maintenance.</li> <li>Preflight, thru flight, BPO inspections, ground handling, minor maintenance, and servicing.</li> <li>Perform routine troubleshooting, installation, repair and maintenance of all electro-mechanical systems and components on the aircraft at the organizational level of maintenance.</li> <li>Service aircraft. Perform end-of-runway, post-flight, preflight, thru-flight, and phase inspections.</li> <li>Troubleshoot and maintain aircraft structures, systems, components, and related equipment. Remove and install aircraft components.</li> <li>Perform inspections, scheduled and unscheduled maintenance on the company aircraft in accordance with FAA regulations, manufacturer and company maintenance manuals and procedures.</li> <li>Service, operate, and maintain ground support equipment and perform interior and exterior cleaning of aircraft and work areas.</li> <li>Precisely complete all maintenance documentation.</li> <li>Perform all other position related duties as assigned or requested.</li> </ul> <h4>Minimum Position Knowledge, Skills, and Abilities Required</h4> <ul> <li>Must have a current FAA Airframe and Powerplant (A&P) license in good standing.</li> <li>At least four (4) years of directly related heavy aircraft maintenance experience is highly desired. Experience must include complying with all applicable aircraft servicing procedures, aircraft maintenance manuals and parts catalogs.</li> <li>Experience with OBOGS systems and T-6 life support required.</li> <li>2.5 years Textron T6 Texan II aircraft maintenance experience within the last 5 years required.</li> <li>Must read, interpret and use manufacturers and aircraft maintenance manuals, service bulletins, blueprints, wiring/schematic diagrams, data tables and other specifications to determine feasibility and method to repair or replace malfunctioning or damaged components.</li> <li>Must be able to inspect, repair, and operate ground support and auxiliary equipment.</li> <li>Possess a current state issued driver’s license.</li> <li>Must be able to obtain and maintain U.S. passport for facility credentials/authorization. Note: U.S. citizenship is required for facility credentials/authorization at this work site.</li> </ul> <h4>Work Environment, Physical Demands, and Mental Demands</h4> <ul> <li>Must possess the ability to carry and lift overhead up to 50 pounds.</li> <li>Duties include walking, climbing, standing, stooping, stretching, and squatting for purposes of moving equipment, boarding and de-boarding the aircraft, performing maintenance using ladders, and performing maintenance atop and below aircraft.</li> <li>Must be able to work at high altitudes when performing flight attendant duties.</li> <li>Work is primarily performed outside in a high-level noise environment.</li> <li>Performing maintenance in low-light areas, operating support equipment after daylight hours.</li> <li>Work is occasionally performed in inclement weather.</li> </ul></p><p></p>

<p><h4>Job Description</h4> <p>The quality construction inspector will support the U.S. Department of State contract in Iraq. Under specific direction, the inspector will apply knowledge and experience of facility systems in the construction and modification of horizontal and vertical applications and support services for LCC department. They will demonstrate knowledge of setting and meeting key performance indicators, to include the verification of compliance metrics in preliminary laydown, during construction phases and then final and acceptance inspections, utilizing the framework Amentum standards, OBO and DoS policies and regulations, local and international construction codes and standards (ICCS).</p> <p>This position will be responsible for providing oversight and collaboration of standards at construction sites, with the monitoring of construction teams, providing oversight in mechanical, electrical and plumbing functions, directing inspections and managing work requirements, utilizing skills and knowledge requiring flexibility, adaptability, and responsiveness. The duties and responsibilities listed below are representative of the nature and level of work assigned and are not necessarily all inclusive.</p> <h4>Duties:</h4> <ul> <li>Provide specific support of construction techniques and improvements and facilitate verification of products and/or service support applications, recommend training, tools, and methods for sound and safe construction principles.</li> <li>Align the quality management function with the performance needs of the product line and/or service support application.</li> <li>Manage and maintain project portfolios, adhere to policies and procedures, the basis being ISO 9001:2015 standard requirements, understand OBO and DoS maintenance practices and policies, and USACE requirements.</li> <li>Maintain an audit schedule, and perform audits of procedures, reporting requirements, plans, programs, and keeping records, reviewing cut sheets, horizontal and vertical building codes.</li> <li>Conduct site inspection, verification of safety practices and procedures, material deliveries and product/materials standards.</li> <li>Record data and analyze performance of material testing, hardness, and slump testing, project change bulletins and change orders.</li> <li>Track deficiencies and work with management to define corrective action plans and close out deficiencies, understand CAPA principles and methods.</li> <li>Collect and analyze data to determine performance trends on mechanical, electrical and plumbing systems and assist in-house teams in repairs, oversee and direct sub-contractors work and products, be aware of new product lines, parts and manufacturing techniques.</li> <li>Prepare and provide daily, weekly and monthly reports to management, document progress and compliance by reporting and photographs, must obtain RSO photo badge approval.</li> <li>Ensure quality-related training is provided by the program and sub-contractor employees.</li> <li>Implement, maintain program instructions, plans, and SOPs. Ensure archives and libraries are reviewed and revised on a planned and scheduled timetable.</li> </ul> <h4>Required:</h4> <p><strong>Minimum acceptable experience level:</strong></p> <ul> <li>Five (5) years’ experience in quality assurance/control in construction projects.</li> <li>Five (5) years’ experience as a quality management professional, supporting a DoD or DoS program.</li> <li>At least two (2) years’ international experience in challenging locations, preferably the Middle East.</li> </ul> <p><strong>Knowledge, skills, and abilities:</strong></p> <ul> <li>Knowledge of all principles and processes involved in quality construction management.</li> <li>Ability to collect, analyze, and summarize data and to prepare clear and concise reports.</li> <li>Experience in effectively dealing with international and headquarters staff, and sensitivity to other cultures, a basic understanding of local customs, culture and language.</li> <li>Exercise sound judgment and make decisions independently and be able to take direction from leadership.</li> <li>Ability to work in a fast-paced environment that requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules, at multiple sites and projects.</li> <li>Must have excellent people skills, organizational and time management abilities.</li> <li>Expert computer skills, specifically in Microsoft Word, PowerPoint, and Excel.</li> <li>Ability to become an active and functioning member of a team.</li> <li>Ability to be innovative and be an agent for change.</li> </ul> <p><strong>Education/Certification:</strong> Certification of quality construction inspector, or eight (8) years’ related experience and/or education.</p> <p><strong>Licenses and certifications:</strong> ISO 9001:2015 certification. Valid driver’s license from home of record.</p> <p><strong>Security vetting:</strong> Must be able to obtain and maintain a secret US government clearance. Note: US citizenship is required to obtain a secret clearance.</p> <p><strong>Language skills:</strong> Satisfactory English proficiency to meet job requirements and to adhere and comply with safety, health, and security measures.</p> <p><strong>Medical:</strong> Successfully complete and pass the medical and dental examinations as required by Amentum and our customer for deployment to Iraq. Must maintain physical and dental requirements for duration of deployment.</p> <h4>Other Responsibilities:</h4> <ul> <li><strong>Safety:</strong> Amentum enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid/buddy aid responsibilities, participating in emergency response tasks, and serving on safety committees and teams.</li> <li><strong>Quality:</strong> Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the Amentum quality policy and carry out job activities in compliance with applicable Amentum quality system documents and customer contracts. Each employee must read and understand his/her quality management and customer satisfaction responsibilities.</li> <li><strong>Procedure compliance:</strong> Each employee must read, understand, and implement the general and specific operational, safety, quality and environmental requirements of all plans, procedures and policies pertaining to job.</li> </ul> <h4>Working and Living Conditions:</h4> <p>This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environment. Temperatures can reach 120-130 degrees Fahrenheit / 50-55 degrees Celsius during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to Iraq for extended periods.</p> <p>Work schedules are a minimum of 6 days per week and 10 hours per day, while some jobs have higher daily and weekly minimums. Employees must be willing and able to perform physical activities including, but not limited to, heavy lifting and moving of items, parts, assemblies, and equipment up to the safety regulation maximum; climbing in and out of equipment; crawling; and working outdoors. This includes being able to lift and carry 40 pounds of personal protective equipment for extended periods of time and being capable of running and ‘duck & cover’ during emergencies without putting oneself or others at risk.</p></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Disposal Yard Specialist will be based at Amentum Baghdad Embassy Compound [BEC] in Baghdad, Iraq, and serve the Base Life Support Services contract in support of the State Department. This position will report to the Disposal Yard Manager. The duties and responsibilities listed below are representative of the nature and level of work assigned and are not necessarily all inclusive.</p><p>DUTIES:</p><ul><li>Responsible for maintaining a safe workplace and ensuring that safety is the highest priority in the workplace.</li><li>Comply with all Environmental Health &amp; Safety and Quality Assurance requirements and goals.</li><li>Provide information and materials to these divisions as necessary to ensure adequate and legal documentation.</li><li>Ensures data accuracy and update of equipment inventory database.</li><li>Ensure that related data processing activities meet the requirements.</li><li>Process excess turn-in documentation for all controlled and non-controlled excess equipment and materials.</li><li>Review, reconcile, adjust and process all inventory transactions.</li><li>Process Survey Reports for all missing equipment.</li><li>Process and coordinate Equipment Transfers.</li><li>Perform positive verbal and written communication skills with all internal and external customers.</li><li>Assist in a broad scope of direct and indirect support activities involving customer owned equipment as necessary to complete assigned tasks.</li><li>Perform additional duties and projects as assigned.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Minimum Acceptable Experience Level: Minimum of 3 years experience supporting a DOD or DOS program Exposure, at least two (2) years of international experience.</li><li>Knowledge, Skills, and Abilities:</li><li>Prior proven experience in Property Disposal operations with Defense Reutilization Management Operations (DRMO), Hazmat experience.</li><li>Experience operating heavy equipment to include up to a 30K Forklift, Extended reach Forklift, Material Handler, Grappler (Excavator), Front End Loader and Material Shredders.</li><li>Experience with cutting torches to include Plasma cutters.</li><li>Commitment to maintaining a high performance team which delivers customer service excellence.</li><li>Knowledge of principles and processes involved in supporting contract responsibilities at an overseas facility.</li><li>Ability to work in a fast-paced environment that requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules.</li><li>Cross-cultural sensitivity with an international perspective.</li><li>Excellent organizational and time management skills.</li><li>Computer skills, specifically in Microsoft Word and Excel.</li><li>Ability to become an active and functioning member of a team.</li><li>Ability to be innovative and be an agent for change.</li><li>Expert communication skills to facilitate and disseminate information.</li><li>Education: A high school diploma or GED (General Education Diploma), Bachelor s Degree in related field fifteen (15) yeas of related experience.</li><li>Passport, Licenses and Certifications:</li><li>As part of pre-contingency requirements, by the time the visa process starts , candidates must possess a valid passport with a minimum of 18 months remaining to expiration date with 8 blank pages.</li><li>Valid drivers license</li><li>Security Vetting: Already possess a US Government issued security clearance or be able to obtain a favorable US Government clearance prior to being hired is required for the position. Must maintain eligibility at the required certification or clearance level for the duration of the contract.</li><li>Language Skills: Satisfactory English proficiency to meet job requirements and to adhere and comply with safety, health, and security measures.</li><li>Medical: Successfully complete and pass the medical and drug examinations as required by Amentum and our customer for deployment to Iraq. Must maintain physical and drug requirements for duration of deployment.</li><li>Previous out of home country experience and previous work experience in harsh environmental conditions are a plus.</li><li>Department of State experience.</li><li>Five to seven years of international experience in challenging locations, preferably working in the Middle East, with a working knowledge of customs and cultural differences.</li><li>Experience working with Amentum-PAE.</li><li>Knowledge of the principles and processes involved in Quality Control Management.</li><li>Successful management of multiple sites in geographically dispersed locations.</li><li>Ability to collect, analyze and summarize data and to prepare clear and concise reports.</li><li>Experience in effectively dealing with international and headquarters staff, and sensitivity to other cultures.</li><li>Exercise sound judgment and make decisions independently.</li><li>Excellent organizational and time management skills, with the ability to handle multiple tasks and administrative details in a fast paced and constantly changing environment. Expert communication skills to facilitate and disseminate information.</li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> We are supporting a leading international Oil &amp; Gas company in to hire an experienced <strong>Project Interface Engineer.</strong><br> This is a unique opportunity to contribute to a high-impact project, working alongside global experts on one of the region’s most strategic energy developments.<br> NES has deep insight into their culture and hiring expectations - allowing us to support candidates effectively throughout the hiring process. <strong>Job Description</strong><ul><li><strong>Role- Project Interface&nbsp;Engineer.</strong></li><li><strong>Location: Al-Anbar Governate, Iraq </strong></li><li><strong>Work Pattern: Rotation– 6 weeks on 3 weeks off</strong></li><li><strong>Daily pay rate </strong></li><li><strong>Verbal and written communication in English is mandatory</strong></li></ul><strong>Why This Opportunity Stands Out</strong><ul><li>6–10 years of experience in Oil &amp; Gas EPC/Construction projects.</li><li>Prior experience as an <strong>Interface Engineer, Project Engineer, Construction Engineer, or Package Engineer</strong>.</li><li>Strong understanding of multidisciplinary engineering: - Mechanical, Electrical, Civil, Instrumentation</li><li>Ability to read and interpret: P&amp;IDs, Isometric drawing, Construction drawings</li><li>Hands-on experience with <strong>Primavera P6</strong>.</li><li>Experience managing interfaces between Client, Contractor, and Subcontractors.</li><li>Construction phase project experience.</li><li>Knowledge of engineering standards, specifications, and compliance requirements.</li></ul><strong>Soft Skill Must-Haves</strong><ul><li>Strong stakeholder management.</li><li>Excellent communication and coordination skills.</li><li>Decision-making capability.</li><li>Conflict resolution and negotiation skills.</li><li>Ability to manage multiple interface issues simultaneously.</li></ul><strong>Why Apply Through NES?</strong><br> NES is the world’s leading engineering staffing provider, operating across Oil &amp; Gas, Power, Life Sciences, and infrastructure sectors.<br> 80+ offices across 45 countries<br> 24,000+ contractors globally and 10,000+ in the Middle East<br> Strong regional presence and long-term client partnerships<br>With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil &amp; Gas, Power &amp; Renewables, Chemicals, Construction &amp; Infrastructure, Life Sciences, Mining and&nbsp;Manufacturing&nbsp;sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients. <br><br> </div>

<p>The Site EHS Specialist is a key member of our EHS Team and a critical partner for our operational site teams at planning, project execution and post outage review stage. The Field EHS Specialist I is responsible for supporting with the creation and execution of a comprehensive EHS plan on our operational site, that drives the best-in-class standards of EHS and sustainability. The objective of this role is to observe, advise, coach and support those with operational responsibilities during planning phase and on-site execution, to prevent injuries, help drive accountability and remain in compliance with company/client EHS policies, programs, and procedures alongside country legislative standards. The field EHS team are central to the adoption, communication, and implementation of injury preventative EHS initiatives and campaigns to reiterate our NO HARM culture.</p><p><strong>Essential Duties &amp; Responsibilities:</strong></p><p>Partner with the operational team in all matters related to EHS Planning, On Site Execution and Outage Close out for mid-complexity outage scopes / customer sites or in support to a Senior EHS Specialist in a high complexity scope / customer site, as assigned by your Resource Manager depending on work demand, competency, and availability</p><p><strong>Outage Planning</strong></p><ul><li>Remove and mitigate Risk</li><li>Pre-Deployment</li><li>Actively participate in the outage planning and Outage Readiness Reviews (ORR), clearly communicating the EHS needs with the project team and manage all compliance activities, including the implementation of in-country legislation and Gas Power OFS EHS programs</li><li>Consult with Service Manager, Lead Field Engineer, Outage Manager and Customer on any potential workplace and task-specific hazards (and the control of such hazards) such as Asbestos, Lead, Arsenic, and Hexavalent Chrome, which may impact the work scope</li><li>Facilitate and lead site walkdowns to ensure strong planning that includes access/egress/laydown areas</li><li>Ensure medical preparedness and that facilities are readily available for all employees.</li><li>Ensure that records are properly maintained</li><li>Mobilization Phase</li><li>Develop and maintain the One Field Services (OFS) EHS Plan, including current Risk Management tools (such as Outage Risk Profile) for each outage in collaboration with the Service Manager and/or Outage Manager.</li><li>Provide support to communicate and manage all sections of the plan</li><li>Establish and monitor adherence to workers work-rest cycle (rest and recovery plan) schedule</li><li>Manage required compliance activities, including the implementation of in-country legislation and OFS current EHS programs</li><li>Confirm submission of all required site documents prior to outage team arrival</li><li>Deliver relevant project specific EHS training, including site induction/orientation training for craft and field crew as well as visitors to ensure that all personnel are informed of site safe working procedures, customer requirements, and practices to fulfill their responsibilities.</li><li>Ensure records of attendance are maintained</li><li>Complete the security plan (non-US group I &amp; II country safety plans) and verify with Security Team</li><li>On Site Execution</li><li>Drive the implementation of OFS EHS Plan, standards, and procedures at site</li><li>Observe and monitor progress of work to coach and advise our on-site teams to ensure:</li><li>The correct Field Procedures are being used</li><li>Identification of hazardous work practices and hazardous conditions associated with tasks to proactively coach teams when there are gaps in risk control</li><li>Meaningful hazard prevention and control conversation are held and facilitated by point of work risk assessment tools (such as Task Risk Assessments)</li><li>Continually coach and reinforce the need of peer checks on site to prevent human error and injury</li><li>Serve as direct liaison with end customer at site in safety task planning with project scope of work, conducting site audits, equipment, and PPE inspections</li><li>Design and host Tool Box talks, safety meetings, orientations, and training ensuring the team understands the hazards associated with the scope of work and maintain the relevant records.</li><li>Coach other team members on site on how to conduct Tool Box talks</li><li>Stop work when conditions or work practices are unsafe and coach all team members to do the same.</li><li>Contribute to safe solutions to resume work</li><li>Support incident investigations, and Root Cause Analysis (RCA) of Near Miss and incidents including compilation and completion of any necessary documentation</li><li>Investigate incidents or near miss events as necessary or required, including compilation and completion of any necessary documentation (Accident investigation or Near miss forms, Gensuite measurements submissions, etc.).</li><li>Analyze root causes to determine safety measures to prevent future incidents and influence the implementation of corrective actions</li><li>Review customers permit systems, including requirements for site posting of permits, LOTO, Hot Work, Confined Space procedures, and FieldCore Lift Plans</li><li>Support and conduct audits to ensure safe work procedures are being followed in respect to Company policy, OSHA, EPA, DOT, and client/ company policy as well as applicable regulatory state and federal laws within specified area where work is being performed</li><li>Complete weekly site internal audits in computer based Gensuite program and advise leadership of Site setup information in system</li><li><br></li></ul><p><strong>Desired Candidate Profile</strong></p><p><strong>Required Qualifications &amp; Experience :</strong></p><ul><li>Technical/University degree (i.e. Bachelor s degree) in EHS or engineering discipline</li><li>Demonstrable experience in an EHS professional role that included responsibility for safety leadership in an industrial field service organization, manufacturing, or heavy construction setting.</li><li>NEBOSH (or the country specific accredited certification) General Certificate or equivalent</li><li>Working knowledge of EHS regulatory requirements across the work region including knowledge of concepts, techniques, and in-country safety regulatory requirements, familiar with OHSA regulations desirable</li><li>Knowledge of ISO 45001 and ISO 19011</li><li>Ability to promptly research and understand how to apply state / provincial / local EHS requirements</li><li>Knowledge and experience of applying and understanding local environmental requirements</li><li>Field experience in construction, power, oil and gas, or heavy industries</li><li>Demonatable interpersonal skills including the ability to coach and influence field employees, leaders and customers in a high pressure, safety critical environment</li><li>Strong written communication for example to prepare comprehensive accurate semi- technical reports that contains key findings and recommendations, fill out permits, document OSHA inspections, documenting details to support RCA</li><li>Proficient in English language both written and verbal</li><li>Proficient in the use of Microsoft office applications and other Internet based reporting tools</li></ul><p><strong>Desired Characteristics:</strong></p><ul><li>Working knowledge of improving mental health and wellbeing in safety critical environment</li><li>first aider Qualified first aider</li><li>Knowledge of ISO 45001 and ISO 19011</li><li>Experience and knowledge of the risks involved in the maintenance of equipment in the power generation industry</li><li>OSHA 30 Training (for USA candidates) or local country equivalent</li><li>Experience and knowledge of the risks involved in the maintenance of equipment in the power generation industry (relevant to where the job is located; e.g., Gas Turbines, Steam Turbines, Generators)</li><li>Strong customer service experience</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <ul><li>Applying and following the client contractual QHSE obligations, PSGS’s QHSE policy and procedures.</li><li>Maintaining the integrity of the ISO Management Documentation System and standards of ISO 9001, ISO 14001, ISO 22000, &amp; ISO 45000.</li><li>Ensuring personal hygiene standards, uniform code, safe lifting techniques and code of behavior is strictly follow</li><li>Following Health and Safety measures including code of accident prevention</li><li>Receiving and inspecting all incoming materials and reconciles with purchase orders/supplier invoice or delivery note</li><li>Inspecting deliveries and verifying freshness, cleanliness, consistency and quality throughout case lots</li><li>Refusing acceptance of damaged or incorrect items</li><li>Following FIFO principles at the time of receiving and during normal routine tasks </li><li>Checking and reporting expiry dates of products, and segregates damaged and spoilt goods for further inspection and recording before disposing</li><li>Entering issuance and receipts vouchers in the warehouse management system when it takes place</li><li>Updating the stock ledger/warehouse management system for better planning and forecasting</li><li>Notifying line Manager/Supervisor of low stock levels in a timely manner</li><li>Ensuring the chiller, freezer and dry stores’ temperature is accurate and reports to Management if any drop in temperature is recorded</li><li>Adhering to food safety and handling policies and procedures across all food-related areas</li><li>Reporting accidents, injuries, and unsafe work conditions to manager</li><li>Maximizing space-usage within the warehouse</li><li>Setting aside storage areas for new stock</li><li>Driving forklifts and operates pallet jacks </li><li>Ensuring products are stocked correctly and safely</li><li>Keeping stock control systems up to date and ensures inventory accuracy</li><li>Preparing various Management information reports on a daily and monthly basis</li><li>Maintaining statistical and financial records</li><li>Act as a food safety team member</li><li>Performing other duties as directed</li></ul><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>Degree in Food service Management and Logistics Training or equivalent</li><li>Minimum of 5 to 7 years work experience in a 4 to 5 star environment or Remote Site Life Support Services</li><li>Hold a valid heavy duty vehicle license</li><li>Trained and certified to drive a forklift and to operate a pallet jacket</li><li>Computer-literate</li><li>Good command of English language, Arabic is an added value</li></ul><p>&nbsp;</p></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Job Description: Maintenance Supervisor – Water Cup Production Line Department: Engineering and Maintenance Industry: Packaged Water / Water Cup Manufacturing Employment Type: Full-time Number of Vacancies: 1 Reports To: Factory Manager / Operations Manager Direct Reports: Senior Maintenance Technicians and Mechanical Maintenance Technicians Preferred Nationality: Indian/Iranian Job Purpose Lead the maintenance function for high-speed thermoforming/Form-Fill-Seal water cup production lines.<br> The Maintenance Supervisor will develop maintenance plans, manage the technical team, respond hands-on to major breakdowns, improve machine reliability, and ensure critical spare parts are available.<br> Key Responsibilities Prepare daily, weekly, monthly, quarterly, preventive, and shutdown maintenance plans.<br> Assign maintenance activities and supervise their safe, timely completion.<br> Lead troubleshooting during major breakdowns and recurring machine failures.<br> Conduct root-cause analysis and implement permanent corrective actions.<br> Reduce unplanned downtime and improve equipment reliability and availability.<br> Coordinate maintenance schedules and machine interventions with production.<br> Prepare maintenance checklists, SOPs, equipment histories, and technical reports.<br> Monitor equipment condition and recommend repairs, overhauls, or replacements.<br> Develop critical spare-parts lists for the complete production line.<br> Forecast spare-parts requirements and establish minimum and maximum stock levels.<br> Monitor spare-parts consumption, failure frequency, and component service life.<br> Prepare accurate technical specifications for purchasing spare parts and services.<br> Evaluate the technical suitability of proposed replacement components.<br> Train senior technicians, mechanical technicians, and selected production employees.<br> Ensure compliance with safety, food-hygiene, and lockout/tagout requirements.<br> Maintain proper housekeeping and tool control during maintenance activities.<br> Required Technical Experience Candidates must have direct, hands-on experience maintaining thermoforming/FFS machines that form, fill, and seal water cups, including: Plastic-film feeding, tracking, and tension control Heating and thermoforming stations Forming molds, vacuum systems, and cooling arrangements Water-filling mechanisms, nozzles, pumps, and volume adjustment Lid-film feeding and alignment systems Heat-sealing temperature, pressure, and timing control Cutting, punching, and cup-discharge systems Pneumatic cylinders, valves, regulators, and air preparation Bearings, chains, sprockets, timing belts, shafts, and gearboxes Linear guides, conveyors, lubrication systems, and machine alignment Mechanical synchronization of high-speed production equipment Experience with Thermonox, Beta-Pak, or technically similar high-speed machines is strongly preferred.<br> Required Qualifications Diploma or bachelor’s degree in Mechanical Engineering, Mechatronics, Industrial Maintenance, or a related discipline.<br> Minimum 7–10 years of relevant maintenance experience.<br> Demonstrated supervisory experience in a production environment.<br> Strong mechanical troubleshooting and root-cause-analysis ability.<br> Ability to prepare preventive maintenance plans, SOPs, checklists, and reports.<br> Working knowledge of maintenance KPIs, downtime analysis, and spare-parts control.<br> Ability to read mechanical drawings, manuals, parts diagrams, and specifications.<br> Willingness to work hands-on and respond to breakdowns outside normal hours when required.<br> Critical Selection Requirement General maintenance experience alone is not sufficient.<br> Candidates whose experience is limited to bottled-water filling lines, RO plants, automotive maintenance, building maintenance, utilities, or unrelated factory equipment will not qualify unless they also have substantial direct experience with thermoform/FFS water cup production machines.<br></span> </div>

<p>We are seeking an experienced and commercially aware MEP Pre-Sales, Estimation &amp; Procurement Engineer capable of independently managing tendering, estimation, pre-sales activities, and end-to-end procurement requirements for MEP projects.</p><p>The ideal candidate must combine strong technical MEP knowledge with solid estimation, sourcing, negotiation, procurement, and logistics experience, and be capable of maintaining continuity between what is priced during tender stage and what is ultimately procured and delivered during project execution.</p><p><b><br></b></p><p><b>Key Responsibilities</b></p><ul><li>Review tender documents, drawings, specifications, BOQs, and scopes of work to fully understand project requirements.</li><li>Prepare and review MEP quantity take-offs, cost estimates, pricing, technical proposals, and tender submissions.</li><li>Identify scope gaps, technical risks, exclusions, assumptions, and potential cost impacts during the pre-sales stage.</li><li>Issue RFQs to suppliers and subcontractors, obtain competitive quotations, and prepare detailed technical and commercial comparisons.</li><li>Evaluate proposed materials, equipment, brands, and subcontractor offers for technical compliance, commercial competitiveness, availability, and lead time.</li><li>Develop and maintain a reliable network of MEP suppliers, manufacturers, subcontractors, and service providers.</li><li>Negotiate pricing, payment terms, delivery schedules, commercial conditions, and supplier commitments.</li><li>Support value engineering and identify technically compliant alternatives that improve project cost, lead time, or execution efficiency.</li><li>Maintain continuity between tender pricing and post-award procurement to ensure that approved project budgets, specifications, and commercial assumptions are preserved.</li><li>Manage procurement activities after project award, including supplier selection, purchase orders, material submittals, approvals, manufacturing follow-up, expediting, and delivery schedules.</li><li>Handle and coordinate international procurement, shipping arrangements, import documentation, customs clearance requirements, and final delivery to site.</li><li>Monitor long-lead and critical MEP items and ensure procurement activities remain aligned with the project programme.</li><li>Coordinate closely with project managers, engineers, consultants, suppliers, subcontractors, and site teams regarding technical and procurement requirements.</li><li>Maintain accurate procurement records, supplier comparisons, purchase commitments, delivery status, and project cost information.</li><li>Take ownership of procurement-related issues and proactively resolve technical, commercial, logistical, and delivery challenges.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor s Degree in Mechanical Engineering or Electrical Engineering.</li><li>Strong multidisciplinary knowledge of MEP systems and the ability to review mechanical, electrical, plumbing, firefighting, ELV, and related project requirements.</li><li>Proven experience in MEP pre-sales, tendering, estimation, and procurement.</li><li>Strong capability in reviewing drawings, specifications, BOQs, and technical documentation and translating them into accurate pricing and procurement requirements.</li><li>Demonstrated experience in supplier sourcing, RFQs, technical and commercial evaluations, negotiation, and subcontractor procurement.</li><li>Proven hands-on experience in end-to-end procurement, including purchase orders, international shipping, import documentation, customs clearance coordination, expediting, and delivery to site.</li><li>Strong commercial awareness and ability to evaluate pricing, payment terms, lead times, alternatives, and procurement risks.</li><li>Ability to independently manage both pre-award tendering activities and post-award procurement requirements.</li><li>Strong negotiation, coordination, organizational, problem-solving, and follow-up skills.</li><li>Ability to work under tender deadlines while simultaneously managing active project procurement requirements.</li><li>Previous site / project execution experience will be considered an advantage.</li><li>Previous experience within an MEP contractor, EPC contractor, or construction company will be highly preferred.</li></ul>

<p>Operate front-end loaders safely and efficiently. Load trucks, hoppers, conveyors, and storage areas with materials such as sand, gravel, soil, aggregates, ore, or other bulk materials. Transport materials within the worksite while minimizing spillage and equipment wear. Perform excavation, stockpiling, backfilling, and site cleanup as required. Conduct pre-start and post-operation inspections of equipment. Monitor and report equipment defects, malfunctions, or maintenance requirements. Perform routine preventive maintenance, including checking fluid levels, tires, hydraulic systems, and lubrication points. Follow site traffic management plans and all health, safety, and environmental (HSE) procedures.</p><p><strong>Desired Candidate Profile</strong></p><p>High school diploma or equivalent (preferred). Valid heavy equipment operator certification or license, where required. Minimum 2 3 years of experience operating front-end loaders or similar heavy equipment.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview ***This position will be physically located in Iraq*** Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. Responsible for the supervision of an assigned aircraft or structural firefighting crew on an alternating shift, supervising all assigned crew members in fire ground situations as well as the performance of care and maintenance of apparatus and equipment as defined in the current task order, Performance Work Standard (PWS), and as directed by Vectrus. Responsible for implementing and maintaining all fire protection services related functional standards within their assigned department IAW the Statement of Work. Implements the Fire Chief’s comprehensive firefighting program at the assigned installation to ensure compliance with AR 420-1, Army Facilities Management, Chapter 25, Fire and Emergency Services, Local work instructions, and National Fire Protection Association (NFPA) Guidelines. Responsibilities This position description is subject to change at any time as needed to meet the requirements of the program or company. + Reports to the Assistant Chief of Operations and functions under their direct supervision. + Supervises a structural and/or aircraft firefighting crew at assigned fire department to ensure compliance with PWS and all local requirements are met. + Assigns, directs, and reviews the work of assigned subordinate employees who assist in carrying out program activities. Ensure timely submittal of CDRL, deliverable, and work product reports pertaining to the operations section as required. Ensure scheduling of required fire protection equipment inspections to comply and meet PWS requirements for the department. + Prevents loss of life and minimizes damage to property and the environment from fire by directing fire attack, confinement, salvage, overhaul, ventilation and rescue activities, to include performing emergency medical care and CPR. Protects and preserves evidence at a fire scene and may participate in investigation of fire incidents. + Assures that procedures are affected; station logs and other records pertinent to reports, activities, drills, equipment inspections, etc., are maintained properly and submitted within time limits, if required. + Maintains current knowledge of the base, its structures, and all systems related to fire protection. + Ensures related firefighting duties are accomplished and documented as outlined in the PWS and department work instructions. When aircraft/facility pre-fire plans are outdated, develop and provide updates. Performs required operators maintenance and tests on rescue tools and saws, ground ladders, fire hose, ropes, harnesses and hardware; serviceable inspections of firefighters’ protective firefighting clothing; and enforces mandated standards for a respiratory protection program for self-contained breathing apparatus (SCBA). + Participates in career and proficiency training programs designed to increase technical proficiency of firefighters. Provide and conducts scheduled training as prescribed by the Fire Chief’s Annual Training Plan and as scheduled by the Assistant Fire Chief. + When first to arrive on-scene, serves as the incident commander of a fire/crash scene until relieved by the Assistant Fire Chief. Determines the best course of action to minimize loss or damage from fires or explosions. Directs the placement of firefighting equipment and personnel to ensure maximum utilization in fire control of aircraft crash/rescue operations. Assesses the fire scene/emergency situation to facilitate fire/rescue operations and to brief the Assistant Fire Chief upon arrival. + Leads and directs assigned firefighting crew to provide safe and proper rescue operations of endangered persons. Ensures rescue operations are performed in accordance with established policies and procedures and minimize the risk of additional danger to firefighting personnel and endangered persons. Employs firefighting measures to minimize the loss or damage as a result of fire or explosions. Responds to hazardous material incidents; leads operations level actions, as directed by the Assistant Fire Chief, to establish control of the affected area with minimal risk to response + As required and/or assigned, oversees fire alarm communication center operations to ensure all firefighting equipment and personnel are dispatched as required. Ensures that the communications center is manned at all times during the shift. Oversees the checkout of communications equipment at the beginning of the shift. As necessary, details additional personnel in case of short staffing. Maintains constant contact with the communications center during real world emergencies or fire drills. + Ensures the maintenance of reference materials such as the NFPA Standards, IFSTA Training Manuals, Lesson Plans, and reviews and provides input to work instructions pertaining to the operations, training, and communications sections of the department. + Performs mid-level supervisory personnel management responsibilities. Advises and provides counsel to employees regarding policies, procedures, and directives of management. Explains performance expectations to employees and provides regular feedback on strengths and weaknesses. Holds employees responsible for satisfactory completion of work assignments. Appraises subordinate workers’ performance ensuring consistency and equity in rating technique + Performs other duties and assignments as required or as directed by the Assistant Fire Chief or Fire Chief. Qualifications + Qualifications + Minimum Qualifications: Education/Certifications: One year related experience may be substituted for one year of education, if degree is required. + Must be CAC eligible and/or able to obtain a Common Access Card (CAC) + Must be a U.S. Citizen + Must be able to pass annual firefighter Occupational Health Exam and SCBA Fit Testing IAW NFPA 1582 and 1583 + Certifications: + Must possess current DoD (IFSAC/PROBOARD) certifications for: Fire Officer I, Fire Inspector I, Fire Instructor I, Airport Fire Fighter, Hazardous Materials - Operations, and Driver/Operator ARFF and Pumper, Mobile Water Supply + Must possess current CPR and First Aid First Responder certification + Required to have IFSAC or Pro-Board Certification + Preferred Qualification: + Undergraduate Degree preferred or equivalent work-related experience + Experience: + Minimum of (7) Seven years of related work experience. + Minimum of three years of leadership experience. + Preferred: + 3 Years’ experience as a Firefighter Crew Chief + Working knowledge of Microsoft Office (Word, Excel and Outlook) + Supervisory Responsibilities: + Supervises a shift and crew for response readiness. Performs training to his/her crew IAW with Assistant Chief training plan. + Skills: + Excellent computer, interpersonal, and oral and written communication skills required. + Computer skills include a working knowledge of Microsoft Word, Excel, Outlook + Requires excellent organizational skills; with the ability to work under fast paced and adverse conditions. + Knowledge of fire protection mission and organization; fire safety requirements and objectives; firefighting and rescue procedures and techniques, firefighter training requirements, firefighting apparatus and equipment, alarm and suppression system operation; water supply systems; hazardous materials. + Required to have the requisite knowledge to maintain and operate: + Fire apparatus firefighting pumps + Firefighting/Rescue equipment, to include but not limited to, air, hydraulic, and hand tools + Vehicle mounted and portable firefighting pumps + Mounted fire suppression systems (Dry Chemical) + Attack lines and Master Streams + Self-Contained Breathing Apparatus (SCBA) + Working Conditions: + Must be capable of working in an extreme weather condition with temperatures exceeding 120 degrees Fahrenheit. Indoor and/or outdoor environment with very adverse and harsh conditions (i.e., hot, dry, dusty, desert environment with average temperatures of 30 degrees in the winter and 130 degrees in the summer months). + Includes some industrial production environment conditions as well. + Physical Requirements: + Heavy work. Exerting up to 100 pounds of force occasionally, and/or up to 50 pounds of force frequently, and/or up to 50 pounds of force constantly to move objects. + Work may require heavy lifting, stooping, climbing, prolonged standing, prolonged sitting, and working with or in areas where a potential could exist for exposure to physical, chemical, or biological agents. Employee use of personal protective equipment (PPE) is required for some situations. PPE includes, but is not limited to, head, foot, torso, respiratory, vision, and hearing protective devices. Must comply with all Fire and Safety Regulations and post policies. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>

<p>Under direct supervision: The Well Engineer is responsible for well proposals and the Basis of Design. Provides Operation Plans and prepares Programs as well as assures technical integrity of Operations planning and execution. Responsible for the day-to-day surveillance of operations. Responsible for the creation of Approval for Expenditure (AFE) and performs cost control of operations. Participates in risk assessment, forecasts and plans medium and long term needs to meet program requirements, and anticipates operational changes and needs. Prepares equipment lists and identifies long lead items. Ensures proper communication within the project. Performs engineering studies to solve recurring problems. Prepares End-of-Well reports and contributes to knowledge management.</p><p>Additional Role Responsibilities: (1) Ability and flexibility to travel to Iraq both domestically and internationally typically 28/28 days per business required. (2) Bachelor's degree in Petroleum Engineering or a relevant Engineering specialization (3) Manages all aspects of rig operations including HS&amp;E, detail well planning, well construction, resourcing, cost reporting, performance management, materials and logistics, service company performance and management systems compliance (4) Manages the team, ensures activities are prioritized effectively and that the team delivers results in line with approved plans and timescales. (5) Develops a high level of responsibility and ownership within the team and promotes continuous improvement in the development of technical expertise and competency, standards and practices, commercial awareness and innovative thinking. (6) Demonstrated experience working on diverse, cross-functional teams. (7) Demonstrated Managership skills. (8) Demonstrated ability to manage stakeholders demands and issues on a Global scale. (9) Demonstrated ability to manage projects and deadlines. (10) Excellent communication skills (oral and written). (11) Strong acumen for technology development and innovation.</p><p>Qualifications Requires a Bachelors degree in STEM, preference in Petroleum or Mechanical Engineering, and 4 or more years of well services / intervention experience. Supervisory experience and exposure to Multi-discipline operations is preferred. Must have Well Control Certificate. Preferred Experience: Minimum of 10-years relevant experience in their discipline or in an operations environment within the oil &amp; gas industry.</p><p><strong>Desired Candidate Profile</strong></p><p>We are looking for the right people - people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world's largest providers of products and services to the global energy industry.</p>

<p>The Well Engineer is responsible for well proposals and the Basis of Design. Provides Operation Plans and prepares Programs as well as assures technical integrity of Operations planning and execution. Responsible for the day-to-day surveillance of operations. Responsible for the creation of Approval for Expenditure (AFE) and performs cost control of operations. Participates in risk assessment, forecasts and plans medium and long term needs to meet program requirements, and anticipates operational changes and needs. Prepares equipment lists and identifies long lead items. Ensures proper communication within the project. Performs engineering studies to solve recurring problems. Prepares End-of-Well reports and contributes to knowledge management.</p><p>Additional Role Responsibilities: (1) Ability and flexibility to travel to Iraq both domestically and internationally typically 28/28 days per business required. (2) Bachelor's degree in Petroleum Engineering or a relevant Engineering specialization (3) Manages all aspects of rig operations including HS&amp;E, detail well planning, well construction, resourcing, cost reporting, performance management, materials and logistics, service company performance and management systems compliance (4) Manages the team, ensures activities are prioritized effectively and that the team delivers results in line with approved plans and timescales. (5) Develops a high level of responsibility and ownership within the team and promotes continuous improvement in the development of technical expertise and competency, standards and practices, commercial awareness and innovative thinking. (6) Demonstrated experience working on diverse, cross-functional teams. (7) Demonstrated Managership skills. (8) Demonstrated ability to manage stakeholders demands and issues on a Global scale. (9) Demonstrated ability to manage projects and deadlines. (10) Excellent communication skills (oral and written). (11) Strong acumen for technology development and innovation.</p><p>Requires a Bachelors degree in STEM, preference in Petroleum or Mechanical Engineering, and 4 or more years of well services / intervention experience. Supervisory experience and exposure to Multi-discipline operations is preferred. Must have Well Control Certificate.</p><p>Preferred Experience: Minimum of 10-years relevant experience in their discipline or in an operations environment within the oil &amp; gas industry.</p><p>Job Details Requisition Number: PHONE_NUMBER Experience Level: Experienced Hire Job Family: Engineering/Science/Technology Product Service Line: Halliburton Project Management Full Time / Part Time: Full Time Additional Locations for this position: Compensation Information Compensation is competitive and commensurate with experience.</p><p><strong>Desired Candidate Profile</strong></p><p>(2) Bachelor's degree in Petroleum Engineering or a relevant Engineering specialization (3) Manages all aspects of rig operations including HS&amp;E, detail well planning, well construction, resourcing, cost reporting, performance management, materials and logistics, service company performance and management systems compliance (4) Manages the team, ensures activities are prioritized effectively and that the team delivers results in line with approved plans and timescales. (5) Develops a high level of responsibility and ownership within the team and promotes continuous improvement in the development of technical expertise and competency, standards and practices, commercial awareness and innovative thinking. (6) Demonstrated experience working on diverse, cross-functional teams. (7) Demonstrated Managership skills. (8) Demonstrated ability to manage stakeholders demands and issues on a Global scale. (9) Demonstrated ability to manage projects and deadlines. (10) Excellent communication skills (oral and written). (11) Strong acumen for technology development and innovation.</p><p>Qualifications Requires a Bachelors degree in STEM, preference in Petroleum or Mechanical Engineering, and 4 or more years of well services / intervention experience. Supervisory experience and exposure to Multi-discipline operations is preferred. Must have Well Control Certificate.</p>

<p>Be a proactive and team-spirit driven member of the CPF-2 Site Construction team, Participate in the review and approval of site construction procedures/method statements. Identify and make recommendations as to areas for improvement in constructability related issues, Ensure Contractors compliance to the technical and safety/environmental Contract requirements, Maintain good relationships with Contractors, being flexible enough where relevant (strive to achieve value at every opportunity) but also enforce rigorously procedures when required, Supervise and control the PVV activities performed by the CPF-2 Site Contractors, Check fitness of the Contractors construction equipment (report any HSE issues) and adequacy of Contractor personnel mob/demob for each activity he is in charge of supervising, Report any Quality Control issues to the CPF-2 Site Quality QC team for proper resolution, Monitor and track the progress of PVV activities. Provide inputs and report issues to the CPF-2 Site Construction and Project Support team, Facilitate the management/resolution of short-term co-activities issues, Provide inputs to the field engineering group to ensure timely resolution of engineering issues that materialize at Site level, Assist in reviewing optimizing short/medium term construction sequences for the benefit of the overall construction schedule and potential recovery plans, Participate in meetings with Contractors and Affiliate s departments as required, Promote and support a positive safety culture within the CPY Site Team and with the Contractors, Act as an example in all H3SE aspects concerned by the AGUP-2 activities in the Site area (including surrounding communities areas), Adopt and demonstrate exemplary behavior with regards to Ethics and Project code of conduct policy, Observe strict confidentiality in the performance of his duties, all along the course of the Project, Carry out any other duties or tasks that may be required by the position. Ensure that CPY Policies, rules, guidelines and procedures are enforced at Site, Ensure short/medium term monitoring of Contractors activities under his area of supervision up to precommissioning, Provide continuous, reliable and relevant reporting to the upper management, Be continuously aware of what information and decisions have respectively to be shared with or made by the upper management, Be exemplary when it comes to H3SE, engagement with Stakeholders and ethics matters. Make sure that other CPY Site team members behave in the same way.</p><p><strong>Desired Candidate Profile</strong></p><p>Professional experience: Degree: Diploma/ Degree in Mechanical disciplines, Minimum 10 years of experience in Oil &amp; Gas Industry or Heavy industries with similar large-scale projects and context in Contract, Engineering and Construction activities for Onshore (or Onshore yards) projects, Proven track records of several successful assignments on similar site positions.</p><p>Technical competencies: Broad Piping, Valving and Vessel technical experience across all aspects of major Surface Facilities project development, Sound knowledge and experience in other disciplines (notably Mechanical, Civil and E&amp;I) of Engineering and Construction for Onshore and Nearshore projects is considered a plus, Vast and concrete knowledge of monitoring of large Oil&amp;Gas EPC Contractors at site.</p><p>Behavioral competencies: Ability to adapt and to represent the company in discussions and meetings with contractors and stakeholders, Ability to embrace and closely monitor Environmental, Social Performances and Security requirements as critical aspects of the Site Project Execution, Proven records of ability to effectively integrate a team and adhere to team-spirit rules. Demonstrate sound organization ability and work in a multi-cultural/international business environment, Strong Leadership Good interpersonal and communication skills ; Good motivational skills, Dedication and ability to work under pressing conditions. Fluent in English (absolute mandatory)</p>

<p><h4>Essential responsibilities:</h4> <p>Aerostat operators/user-level maintainers will participate in the overall, hands-on operation of the aerostat system including launch, in-flight, recovery, and moored activities.</p> <p>Candidates will perform all functions to operate the PGSS/PTDS, an aerostat mounted intelligence, surveillance, and reconnaissance (ISR) platform, its mobile mooring platform (MMP), sensor payload(s), communications and navigation systems as well as associated support equipment (boom lift, forklift, all terrain vehicles (ATVs), and electrical power generators).</p> <p>Candidate will perform user-level maintenance functions including performing hands-on preventative maintenance checks and services (PMCS), troubleshooting, removing and replacing line replaceable units (LRUs), and removing and replacing payloads.</p> <p>Candidate must possess a diverse range of skills with the ability to quickly adapt to new situations. Tasks will be performed under direction of higher classified technicians and/or site personnel.</p> <h4>Minimum requirements:</h4> <ul> <li>High school diploma or equivalent is required.</li> <li>Two-year associate’s degree in a technical field from an accredited college can substitute for work experience.</li> <li>Must have an active secret US government clearance or the ability to obtain a secret clearance. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must have a valid U.S. passport with a minimum of one year remaining.</li> <li>Must have valid US driver’s license.</li> <li>Knowledge of and experience in the operations of hardware systems and components.</li> <li>Experience in fault detection, isolation, and correction of hardware systems and individual components.</li> <li>Ability to perform routine system maintenance and analysis functions including: hardware configurations; adding, removing and replacing hardware components; use of hardware and software diagnostic testing tools; reading of electronic circuit schematics; and repairing printed circuit boards.</li> <li>At least one (1) year previous aerostat experience OR two (2) years of experience in the following areas may be substituted in lieu of aerostat experience:</li> </ul> <p><strong>1) Electrical maintenance mechanic</strong></p> <ul> <li>Possess at least two (2) years aerostat experience as an operator at the 20 series level or greater from Army MOS 35F (Intelligence Analyst), 35G (Geospatial Intelligence Imagery Analyst), 35H (Common Ground System Analyst), 96R (Ground Surveillance Systems Operator), 96U (Unmanned Aerial Vehicle Operator), or military branch equivalent.</li> <li>Two years of hands-on experience in performing operations and maintenance tasks either on an aerostat system or a related industry/military equivalent is required.</li> <li>Must be qualified at the 10 series or greater level (via military or civilian technical schools) is required.</li> <li>Ability to read electronic schematics.</li> <li>O&M of electro-mechanical equipment to include one or more of the following: <ul> <li>Hydraulic/servo valves</li> <li>Hydraulic actuators, control systems</li> <li>Test and diagnostic equipment</li> </ul> </li> </ul> <p><strong>2) Networking, IT & information systems</strong></p> <ul> <li>Two years’ experience is required.</li> <li>Must be qualified at the 10 series or greater level; MOS 25B/F or other military branch equivalent or industry occupational specialties as a CISCO Network Administrator; Army MOS 25L/N or other military branch equivalent or industry occupational specialties as a Network Installation (BICSI or Network + or Comp T Certification) will be considered.</li> <li>CCIE certification with fiber optic certification is preferred.</li> </ul> <p><strong>3) Mechanical maintenance</strong></p> <ul> <li>Mechanical maintenance with qualifications at the 10 series or greater from U.S. Army MOS 94D/X and 91/B/S/W or other military branch equivalent, or industry occupational specialties such as National Institute for Automotive Service Excellence (ASE) Certified Truck Mechanic or Federal Aviation Administration (FAA) General Mechanic 1 or greater.</li> <li>Two years of hands-on experience on an aerostat system or a related industry/military equivalent is required.</li> <li>O&M of mechanical equipment to include one or more of the following: hydraulic systems, winch systems, tether/cable handling systems, industrial generator sets, power switch gear, HVAC, cranes aerial lift, forklift, industrial generator sets.</li> </ul> <h4>Physical requirements:</h4> <ul> <li>Requires the ability to regularly lift up to 50 lbs.</li> <li>Requires the ability to regularly climb extension ladders, roof ladder, stepladders, and stairs at least 10 times during shift.</li> <li>Requires the flexibility to bend/stoop, squat repetitive during shift.</li> <li>Requires the ability to regularly kneel repetitive for shift.</li> <li>Requires the ability to move in a 90-degree fashion on a repetitive basis for shift.</li> <li>Requires the ability to stretch/reach on a repetitive basis for shift.</li> <li>Requires the ability to walk extensively throughout the plant during shift.</li> <li>Requires the ability to interact with all clients in a professional and friendly manner despite periods of stress.</li> </ul> <h4>Medical requirements:</h4> <p>Successfully complete and pass the medical and dental examinations as required by the employer and customer for deployment to Iraq.</p> <p>Must maintain physical and dental requirements for the duration of the deployment.</p> <h4>Working and living conditions:</h4> <p>This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environment. Temperatures can reach 120-130 degrees Fahrenheit/50-55 degrees Celsius during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to CENTCOM, EUCOM, and AFRICOM for extended periods. Work schedules are a minimum of 6 days per week and 10 hours per day, while some jobs have higher daily and weekly minimums.</p></p><p></p>

<p>We are seeking an experienced Mechanical Engineer to lead the complete MEP works for a prestigious 5-Star Hotel Project in Iraq.</p><p>The successful candidate will be responsible for managing the Mechanical, Electrical, Plumbing, Fire Fighting, ELV, and BMS works from design coordination through procurement, construction, testing &amp; commissioning, and final handover while ensuring the highest standards of quality, safety, and schedule performance. Previous experience delivering luxury hospitality projects is highly preferred.</p><p><b>Key Responsibilities</b></p><ul><li>Lead and manage all MEP activities throughout the project lifecycle.</li><li>Coordinate Mechanical, Electrical, Plumbing, Fire Fighting, ELV, and BMS works.</li><li>Coordinate with architects, structural engineers, interior designers, consultants, and subcontractors.</li><li>Review and approve shop drawings, material submittals, method statements, and technical documentation.</li><li>Monitor project progress, quality, cost, and schedule to ensure successful project delivery.</li><li>Lead procurement planning and coordinate material approvals.</li><li>Manage testing, commissioning, system integration, and project handover.</li><li>Ensure compliance with project specifications, hotel brand standards, local regulations, and HSE requirements.</li><li>Resolve technical and construction challenges proactively.</li><li>Prepare progress reports and attend coordination meetings with the Client and Consultant.</li></ul><p>What We Offer</p><ul><li>Opportunity to lead a landmark hospitality project.</li><li>Professional and collaborative working environment.</li><li>Competitive salary package based on qualifications and experience.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Bachelor's Degree in Mechanical Engineering.</p><p>Minimum 12 years of experience in MEP construction projects.</p><p>Minimum 5 years in a Project Manager or Senior MEP Management role.</p><p>Proven experience delivering at least one 5-Star Hotel Project from construction through testing &amp; commissioning and handover.</p><p>Strong knowledge of HVAC (Chilled Water Systems), Plumbing, Fire Fighting, ELV, BMS, and coordination of Electrical systems.</p><p>Proficiency in Primavera P6, Microsoft Project, AutoCAD, and Microsoft Office.</p><p>PMP certification is an advantage.</p><p>Excellent leadership, communication, and coordination skills.</p><p>Excellent command of English.</p>

<p><h4>Job purpose</h4> <p>To maintain, repair HVAC system in process area. Perform preventive and shutdown maintenance, inspection, repair, installation and commissioning of HVAC i.e. heating, ventilation, air conditioning systems in Majnoon.</p> <h4>Duties and responsibilities</h4> <ul> <li>Maintain, install, and repair HVAC, air conditioning, ventilation and heating systems.</li> <li>Troubleshoot issues with industrial HVAC system.</li> <li>Conduct performance tests with specialized tools and adjust system settings to keep the system reliable.</li> <li>Downloading and uploading programs in PLCs such as Siemens, Schneider, ABB, Mitsubishi, Allen Bradley etc.</li> <li>Troubleshoot and repair the smart VRF HVAC units which are having BLDC motors and programmed electronic cards.</li> <li>Carry out brazing with oxy acetylene set to replace compressors, rectifying copper pipe leaks and modifying refrigerant pipe lines.</li> <li>Repair or replace defective parts in units and equipment and their controls, including thermostats, automatic switches, fan controls, log switches, damper motors, louvers, relays, filters, controls, belts, compressors, heat exchangers, high limit controls, pressure controls.</li> <li>Operate a variety of hand and power tools, brazing torch, vacuum pump, test equipment utilized.</li> <li>Install and calibrate systems; install copper tubing and repair pipes and tubing as necessary; test joints and insulate pipes of HVAC, air conditioning systems; flush rebuild pressure and temperature.</li> <li>Install compressors, evaporators, motors, ducts, and piping as well as mechanical/electrical controls; read and interpret blueprints/diagrams.</li> <li>Troubleshoot breakdowns and repair malfunctioning HVAC systems and components; utilize measuring and testing instruments.</li> <li>Demonstrated exceptional time management skills; organized and prioritized high volume of work orders to ensure maximum quality.</li> </ul> <h4>Qualifications & experience</h4> <ul> <li>University degree in related discipline.</li> <li>8-10 years’ experience of HVAC system and AC units within a large industrial plant, preferably in the oil and gas industry.</li> <li>Understanding of advanced principles of air conditioning, refrigeration and heating.</li> <li>Proficient in reading schematics and work plans.</li> <li>Computer and software skills: <ul> <li>Excel – advanced</li> <li>Word – intermediate</li> <li>PowerPoint – intermediate</li> </ul> </li> <li>Intermediate proficiency in English verbal and written.</li> </ul> <h4>Skills</h4> <ul> <li>Knowledge of materials, methods and tools used in the operation and repair of HVAC.</li> <li>Knowledge of welding and soldering techniques.</li> <li>Proper methods of storing equipment.</li> <li>Aware about PTW system and working in oil field.</li> <li>Have IT skills (Excel, PowerPoint, Microsoft Office, SharePoint etc.).</li> <li>Communicate effectively both orally and in writing.</li> <li>Work cooperatively with others.</li> <li>Work independently with little direction.</li> <li>Meet schedules and timelines.</li> <li>Maintain routine records and prepare reports.</li> </ul></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>INTECH Process Automation is seeking a Seasoned<strong> Commissioning Technician (Electrical) </strong>to join our Operations &amp; Maintenance (O&amp;M) team. The selected candidate will be responsible for <strong>electrical pre-commissioning, testing, inspection, rectification, and documentation</strong> under approved procedures and Engineer supervision. Ensure electrical systems supporting instrumentation and ICSS are safely tested and ready for energization and handover.</p><br><p><strong>Key Responsibilities:</strong></p><br><ul><li>Perform assigned <strong>electrical pre-commissioning and commissioning tests</strong> under Engineer supervision.</li><li>Conduct <strong>continuity, insulation resistance (IR), earth/grounding, polarity, and functional tests</strong>.</li><li>Inspect and verify <strong>cables, terminations, glands, panels, connections, and labeling</strong>.</li><li>Perform checks on <strong>UPS, battery systems, control power supplies, and distribution panels</strong>.</li><li>Support testing of electrical power supplies serving <strong>Instrumentation, ICSS, DCS, SIS, PLC, and F&amp;G systems</strong>.</li><li>Identify and rectify approved <strong>electrical defects and punch-list items</strong>.</li><li>Support <strong>LOTO, isolation, de-energization, energization, and safe reinstatement</strong> activities.</li><li>Maintain <strong>test equipment, meters, tools, cables, and commissioning consumables</strong>.</li><li>Complete <strong>test sheets, checklists, punch records, inspection records, and commissioning documentation</strong>.</li><li>Report failed tests, defects, abnormal conditions, and unresolved issues to the <strong>Commissioning Engineer</strong>.</li><li>Coordinate with <strong>Electrical, Instrumentation, ICSS, Operations, Construction, HSE, and vendors</strong>.</li><li>Comply with <strong>PTW, LOTO, electrical safety, HSE, quality, and Company requirements</strong>.</li></ul> </div>

<p>Under general autonomy and wide scope: The Well Engineering Manager functions as a technical Subject Matter Expert (SME), typically at the Country level staying abreast of current industry and PSL technological developments.</p><p>This position is accountable for the implementation of Engineering processes with respect to quality and integrity assurance. Reviews and maintains HMS processes to ensure the management system remains up-to-date with industry best practices. Responsible for approval of Well Designs and/or Programs and ensures these are in compliance with contracts, as well as, the Company's HMS policies &amp; procedures. Ensures all Operational Activities are adequately evaluated and a full Risk Matrix table with Mitigation plans is completed. Responsible for resolving critical engineering/operational issues, identifying chronic problems and proposing solutions, ensuring optimum technical solutions for field project development, and compliance with all Project/Contract metrics. Coordinates engineering programs/procedures and practices among different Projects and/or Rigs. Supports development of new technology and champions the application and deployment of the same. Leads technical presentations to client. Provides work direction and mentorship on a regular basis to Engineers. Responsible for the training &amp; development of Well Engineers and their competency development. Operates with significant level of technical and/or operational independence in all assigned areas.</p><h4>Additional Role Responsibilities:</h4><ul><li>Ability and flexibility to travel to Iraq both domestically and internationally typically 28/28 days per business required.</li><li>Provides Managership and guidance to both planning and operational teams.</li><li>Demonstrates support of the management system</li><li>Manages all well planning, design and engineering activities associated with drilling, completions and abandonment operations.</li><li>Ensures the team properly consider design options, assess risks and validate costs and work closely with other Wells/technical teams, legislative bodes and service providers at various stages of the well planning process to ensure viability of proposals.</li><li>Manages well operations to effectively control the risk, technical execution, cost control and ensures compliance with policies and procedures.</li><li>Manages operational deviations from Company policy with suitable adherence to the risk assessment process.</li><li>Manages platform rig engineering in the planning and execution of rig maintenance, rig modifications, recertification and upgrades.</li><li>Ensures peer reviews, risk assessments, engineering/planning reviews, etc. are undertaken.</li><li>Sets performance targets and implements performance measurement and improvement processes.</li><li>Ensures that the lessons learned system is utilized to record lessons and used to transfer lessons into detail well planning to complete the full learning cycle.</li></ul><p>Requires an undergraduate degree in STEM, preferably in Petroleum or Mechanical Engineering, and 12+ years experience as a Well Engineer with knowledge of drilling, completions, intervention operations and techniques. Demonstrated experience in leading or supervising an engineering team. Must have a Well Control certificate.</p><p>Preferred Experience: Minimum of 15-years relevant experience in their discipline or in an operations environment within the oil &amp; gas industry.</p><p><strong>Desired Candidate Profile</strong></p><p>Requires an undergraduate degree in STEM, preferably in Petroleum or Mechanical Engineering, and 12+ years experience as a Well Engineer with knowledge of drilling, completions, intervention operations and techniques. Demonstrated experience in leading or supervising an engineering team. Must have a Well Control certificate.</p><p>Preferred Experience: Minimum of 15-years relevant experience in their discipline or in an operations environment within the oil &amp; gas industry.</p>