Interior Designer Jobs in Iraq

<p><h4>E&I Engineer</h4> <p>KBR Sustainable Technology Solutions (STS) provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design capabilities, and smart solutions to optimize planned and operating assets.</p> <p>Responsible for start-up and plant operations activities including equipment and system checkout, inspection for proper installation, review for correct design, and calculation of expected system and equipment operating parameters under temporary start-up conditions. Coordinates start-up operations, including the direction of craft, and all other start-up activities such as flushing, chemical cleaning, and initial equipment and system operation. Coordinates performance tests and calculates test results and heat balances. Performs calculations required to properly evaluate design changes, provides engineering reports for the engineering department to assist in design change preparation. Works with client at the site.</p> <p>Under general supervision, performs all conventional aspects of the functional area subject matter. Devises new approaches to problems encountered. Plans, schedules, and conducts work requiring judgment in the independent evaluation, selection, and adaptation of engineering techniques, procedures, and criteria. Performs work which involves conventional engineering practice but may include a variety of complex features such as conflicting design requirements, unsuitability of conventional materials, and difficult coordination requirements. Provides technical guidance to designers and less experienced engineers.</p> <p>Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability, or operations. Skills are typically acquired through an undergraduate degree in engineering and a minimum of 10 years related experience, with average experience ranging from 10-15 years.</p></p><p></p>

<p><h4>E&I Engineer</h4> <p>KBR Sustainable Technology Solutions (STS) provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design capabilities, and smart solutions to optimize planned and operating assets.</p> <p>Responsible for start-up and plant operations activities including equipment and system checkout, inspection for proper installation, review for correct design, and calculation of expected system and equipment operating parameters under temporary start-up conditions. Coordinates start-up operations, including the direction of craft, and all other start-up activities such as flushing, chemical cleaning, and initial equipment and system operation. Coordinates performance tests and calculates test results and heat balances. Performs calculations required to properly evaluate design changes, provides engineering reports for the engineering department to assist in design change preparation. Works with client at the site.</p> <p>Under general supervision, performs all conventional aspects of the functional area subject matter. Devises new approaches to problems encountered. Plans, schedules, and conducts work requiring judgment in the independent evaluation, selection, and adaptation of engineering techniques, procedures, and criteria. Performs work which involves conventional engineering practice but may include a variety of complex features such as conflicting design requirements, unsuitability of conventional materials, and difficult coordination requirements. Provides technical guidance to designers and less experienced engineers.</p> <p>Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability, or operations. Skills are typically acquired through an undergraduate degree in engineering and a minimum of 10 years related experience, with average experience ranging from 10-15 years.</p></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>E&amp;I Engineer<br><br>E&amp;I EngineerECSS30 - Sr. Specialist, Commissioning<br><p>KBR Sustainable Technology Solutions (STS) provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design capabilities, and smart solutions to optimize planned and operating assets.</p><br><br><br><p>Responsible for start-up and plant operations activities including equipment and system checkout, inspection for proper installation, review for correct design, and calculation of expected system and equipment operating parameters under temporary start-up conditions. Coordinates start-up operations, including the direction of craft, and all other start-up activities such as flushing, chemical cleaning, and initial equipment and system operation. Coordinates performance tests and calculates test results and heat balances. Performs calculations required to properly evaluate design changes, provides engineering reports for the engineering department to assist in design change preparation. Works with client at the site. Under general supervision, performs all conventional aspects of the functional area subject matter. Devises new approaches to problems encountered. Plans, schedules, and conducts work requiring judgment in the independent evaluation, selection, and adaptation of engineering techniques, procedures, and criteria. Performs work which involves conventional engineering practice but may include a variety of complex features such as conflicting design requirements, unsuitability of conventional materials, and difficult coordination requirements. Provides technical guidance to designers and less experienced engineers. Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations. Skills are typically acquired through an undergraduate degree in Engineering and a minimum of 10 years related experience, with average experience ranging from 10-15 years.</p><br><br><br><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Role Purpose <br> <p><span>Zain Iraq is actively recruiting to hire a Senior Product Designer - Digital Platforms to turn product vision and business priorities into specifications precise enough to build from. The role owns the documentation bridge between what the business asks for and what technology teams deliver.</span></p><br><p><span>The role is responsible for defining features through user stories, functional and technical requirements, and acceptance criteria that leave no room for interpretation, and for confirming feasibility with technology teams before development begins.</span></p><br><p><span>This is a technical specification and documentation role, distinct from Experience Design. The role owns the precision of what is defined and the responsibility that what gets built is what was asked for.</span></p><br> <br> <br><br> Responsibilities <br> <ul><li><p><span>Translate the product vision and business priorities set by product owners into detailed product requirements and specifications.</span></p><br></li><li><p><span>Define features through comprehensive user stories setting out functional and technical requirements, including edge cases, error states and dependencies.</span></p><br></li><li><p><span>Develop acceptance criteria precise enough for quality assurance to test against and for technology teams to build from without interpretation.</span></p><br></li><li><p><span>Create and maintain product documentation as the single reference point for each feature, keeping it current as scope changes.</span></p><br></li><li><p><span>Work with technology teams to assess feature feasibility before development begins and resolve gaps between business intent and technical constraints.</span></p><br></li><li><p><span>Identify and document API, data, and third-party dependencies within the specification, so they are known before build rather than discovered during it.</span></p><br></li><li><p><span>Ensure technical constraints and integration requirements are reflected in the requirement itself and flag any dependency that affects deliverability.</span></p><br></li><li><p><span>Ensure backlog items meet the definition of ready before they are committed to a sprint, so development is never held up by an incomplete specification.</span></p><br></li><li><p><span>Contribute requirement detail to backlog refinement, resolving ambiguity before items enter development.</span></p><br></li><li><p><span>Provide requirement clarification on demand during build, at the point the question arises.</span></p><br></li><li><p><span>Review delivered features against the specification and acceptance criteria, and confirm the build matches the intent before sign-off.</span></p><br></li><li><p><span>Gather and analyses stakeholder requirements with product owners and convert them into actionable user stories.</span></p><br></li><li><p><span>Maintain the specification pipeline so requirements are documented ahead of development need.</span></p><br></li><li><p><span>Coordinate with Experience Design so that user journeys and interface designs are reflected accurately in the specification.</span></p><br></li><li><p><span>Challenge requirements that are unclear, conflicting, or commercially unjustified before they enter the backlog.</span></p><br></li><li><p><span>Work with the teams to define tracking and success metrics for each feature at the specification stage rather than after launch.</span></p><br></li><li><p><span>Evaluate feature adoption and usage against the metrics defined and specify iterative improvements.</span></p><br></li><li><p><span>Work with the quality assurance teams so that acceptance criteria, test conditions and defect resolution stay aligned to product intent.</span></p><br></li><li><p><span>Set and maintain the specification standards, templates and documentation conventions used across digital platforms.</span></p><br></li><li><p><span>Present feature scope, progress and performance to stakeholders in terms of business outcome rather than technical detail.</span></p><br></li></ul> <br> <br><br> Education, Experience, and Competencies <br> <p><strong><span>Education</span></strong></p><br><ul><li><p><span>Bachelor’s degree in Computer Science, Information Systems, Engineering, Business or a related discipline.</span></p><br></li></ul><p><strong><span>Experience</span></strong></p><br><ul><li><p><span>5+ years of experience in product management, business analysis, product ownership, or technical product specification for digital products.</span></p><br></li><li><p><span>Proven ability to define user stories, functional/technical requirements, and acceptance criteria for technology teams.</span></p><br></li><li><p><span>Experience working with Agile teams (Scrum/Kanban) and cross-functional stakeholders, including Product, Design, Development, and QA.</span></p><br></li><li><p><span>Experience specifying consumer-facing mobile and web products, including understanding APIs, data flows, dependencies, feasibility, and technical constraints.</span></p><br></li><li><p><span>Proficiency in JIRA, Confluence, Azure DevOps, and familiarity with Figma.</span></p><br></li><li><p><span>Strong analytical and documentation skills, with the ability to identify requirement gaps and translate data insights into product improvements.</span></p><br></li><li><p><span>Experience in telecom, fintech, e-commerce, or high-volume digital products is an advantage.</span></p><br></li></ul><p><strong><span>Competencies</span></strong></p><br><p><span>Behavioral</span></p><br><ul><li><p><span>Analytical Thinking</span></p><br></li><li><p><span>Problem Solving and Creativity</span></p><br></li><li><p><span>Initiative</span></p><br></li><li><p><span>Teamwork</span></p><br></li><li><p><span>Communication and Presentation</span></p><br></li><li><p><span>Relationship Building</span></p><br></li></ul><p><span>Technical</span></p><br><ul><li><p><span>Product Management</span></p><br></li><li><p><span>Technology Application</span></p><br></li><li><p><span>Project/Program Management</span></p><br></li><li><p><span>Business Modelling and Analysis</span></p><br></li><li><p><span>IT User Support</span></p><br></li><li><p><span>Strategic Planning</span></p><br></li></ul><p><span>IDE Competency</span></p><br><ul><li><p><span>Courage to Engage</span></p><br></li><li><p><span>Addressing Bias</span></p><br></li><li><p><span>Allyship</span></p><br></li></ul> <br> <br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Senior Piping Engineer - Materials (Iraq)<br><br><br><p><b><i>"</i></b><b><i>Belong, Connect, Grow, with KBR! </i></b></p><br><br><br><p><b><i>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</i></b></p><br><br><br><p><b><i>KBR provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets."</i></b></p><br><br><br><p><b>Title:</b>&nbsp;Senior Piping Engineer – Materials</p><br><br><p><b>Location:</b>&nbsp;Iraq - KBR office</p><br><br><p>28/28 rotation</p><br><br><br><p><b>Job Purpose</b></p><br><br><ul><li>Define piping design bases, codes, standards, and deliverables to ensure safe, reliable, and cost-effective solutions.</li><li>Single point of contact for Piping deliverables and Activities related to Piping Materials </li><li>Interface with client, Vendor and other stakeholders for successful execution of the project</li><li>Coordinate with multi-disciplinary teams (process, mechanical, civil, electrical, instrumentation) and vendors to ensure integrated piping systems.</li><li>Mentor engineers, drive quality, and ensure schedule adherence for piping deliverables across project phases.</li></ul><br><p><b>Key Responsibilities</b></p><br><br><ul><li>Develop and review piping design basis, piping material specifications, datasheets, and technical bid evaluations.</li><li>Ensure compliance with applicable codes and standards and project-specific requirements.</li></ul><ul><li>Development of standard deliverables, various datasheets, and requisition packages related to piping.</li><li>Experience in Non-metallic Piping (GRE / HDPE) Procurement and specs.</li><li>Provide in-depth technical support for material selection involving metallic and Non-metallic piping systems.</li><li>Participate in material selection and corrosion review sessions to ensure suitable materials for service conditions.</li><li>Review and approve technical deliverables (isometrics, P&amp;IDs, BOMs, MOC/Change Notes, design change requests, technical queries).</li><li>Demonstrated knowledge of the Material Tracking throughout the project cycle.</li><li>Understand the MOC process and employ effective change management throughout the lifecycle of the project</li><li>Contribute to Lesson Learnt from the Project</li><li>Report to Department Manager/ Lead Engineer for the project.</li></ul><br><p><b>Experience</b></p><br><br><ul><li>12+ years of experience in Concept, FEED and Detail Engineering and EPCM experience in the Oil &amp; Gas industry.</li><li>Experience in Middle East clients like ADNOC, BP, BOC, PDO, Total Energies &amp; Qatar Energies others are highly preferred.</li><li>Familiarity of Onshore and Offshore facilities and carried out Greenfield and Brownfield Projects.</li><li>Experience in working with multicultural project teams across the various project execution center’s</li><li>Familiarity with international piping codes and standards such as ASME B31.3, ASTM, API, and NACE MR0175/ISO 15156.</li></ul><br><p><b>Qualifications</b></p><br><br><ul><li>Master or Bachelor of Engineering in a related field.</li><li>Professional membership or relevant certifications (e.g., PE/Chartered Engineer) are a plus.</li><li>Certification related to piping design or stress analysis is advantageous.</li></ul><br><p><b>Technical Skills</b></p><br><br><ul><li>Strong background in piping design, engineering, stress analysis, and support design.</li><li>Proficiency with piping design software and calculation tools (e.g., CAESAR, AutoPIPE and 3D modeling tools).</li><li>Technical experience to prepare manhours estimation for different types of piping activities &amp; deliverables of different phases of the project like Select phase, FEED &amp; Execution etc.</li><li>Familiarity with codes, standards, regulations and practices applicable to the design and construction of Various facilities.</li><li>Hands on knowledge of codes and standards relevant to piping.</li><li>Experience with high-pressure piping, thermal insulation, coatings, and corrosion considerations.</li><li>Diverse working experience in project management, conceptual, FEED and detailed design, and construction.</li><li>Knowledge of Interdisciplinary Work Processes/Interface/Deliverables</li><li>Responsible for the training and development of engineers in his/her Team.</li><li>Adherence to company processes and procedures and handle internal and external project audits.</li><li>Proven experience in vendor qualification, technical bid evaluation, and factory audits.</li></ul><br><p><b>Soft Skills</b></p><br><br><ul><li><b>Communication:</b>&nbsp;Clear, concise communication with technical and non-technical stakeholders.</li><li><b>Problem Solving:</b>&nbsp;Proactive identification and mitigation of piping-related risks.</li><li><b>Project Management:</b>&nbsp;Planning, scheduling, risk management, and deliverable tracking.</li><li><b>Influence &amp; Collaboration:</b>&nbsp;Effective collaboration with clients, vendors, and internal teams.</li><li><b>Adaptability:</b>&nbsp;Comfort in dynamic project environments and changing technical requirements.</li><li><b>Attention to Detail:</b>&nbsp;Rigorous approach to reviews, calculations, and documentation.</li><li><b>Safety Mindset:</b>&nbsp;Commitment to health, safety, and environment (HSE) standards.</li><li><b>Critical Thinking: </b>Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems</li></ul><br><br><br> </div>

<p>The Electrical Engineer will be responsible for the design, analysis, and maintenance of high-voltage transmission systems supporting petroleum and gas operations. The role includes leading transmission line projects from concept through commissioning, conducting electrical load analysis, preparing system models, developing technical specifications, ensuring compliance with IEEE, NESC, NEC, and environmental regulations, and coordinating with multidisciplinary engineering teams. The successful candidate will also oversee inspections, mentor engineering staff, and provide technical expertise for transmission system upgrades and expansion projects.</p><p>Bachelor's degree in Electrical Engineering is required; a Master's degree with a specialization in Power Systems is highly preferred. Candidates must have a minimum of 10 years of electrical engineering experience, including at least 5 years in high-voltage transmission line design, analysis, and maintenance within the oil & gas, petroleum, or energy industry. Proficiency in ETAP, PLS-CADD, AutoCAD, or equivalent electrical engineering software is required. Strong knowledge of IEEE, NESC, and NEC standards, proven leadership skills, excellent communication abilities, and a Professional Engineer (PE) license or equivalent certification are preferred.</p>

<p>The Electrical Engineer will be responsible for the design, analysis, and maintenance of high-voltage transmission systems supporting petroleum and gas operations. The role includes leading transmission line projects from concept through commissioning, conducting electrical load analysis, preparing system models, developing technical specifications, ensuring compliance with IEEE, NESC, NEC, and environmental regulations, and coordinating with multidisciplinary engineering teams. The successful candidate will also oversee inspections, mentor engineering staff, and provide technical expertise for transmission system upgrades and expansion projects.</p><p>Bachelor's degree in Electrical Engineering is required; a Master's degree with a specialization in Power Systems is highly preferred. Candidates must have a minimum of 10 years of electrical engineering experience, including at least 5 years in high-voltage transmission line design, analysis, and maintenance within the oil & gas, petroleum, or energy industry. Proficiency in ETAP, PLS-CADD, AutoCAD, or equivalent electrical engineering software is required. Strong knowledge of IEEE, NESC, and NEC standards, proven leadership skills, excellent communication abilities, and a Professional Engineer (PE) license or equivalent certification are preferred.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>About Rahal Rahal is the travel mini-app inside Iraq’s Super Qi ecosystem, a Rocketship redefining how millions of travelers search, book, and manage journeys across flights, hotels, and digital services.<br> We make travel simple, safe, and accessible to everyone, everywhere.<br> Behind every great traveler experience lies a powerful hotel inventory and this is where you come in.<br> We’re building a new generation of travel; transparent, tech-first, and truly customer-obsessed.<br> About the Role Rahal is looking for a Senior Backend Software Engineer who will play a key role in designing and implementing advanced solutions to improve our Travel platform, enhancing customer satisfaction and ensuring smooth operational processes.<br> Key Responsibilities Design and implement reusable, clean, tested, efficient, secure, maintainable, and well-documented solutions.<br> Assist partners in their integration process with our published APIs.<br> Document findings, actions, and plans thoroughly, by setting up the foundations for a solid reporting framework and a communication standard.<br> Provide the technical feasibility of implementing product requirements and offer valuable input to the product team.<br> Translate product requirements into SRS and technical plan.<br> Proactively identify technical debt and propose mitigation strategies.<br> Maintaining and developing your knowledge about software development, and supporting/mentoring other team-members, sharing guidance to help them achieve career growth.<br> Conduct code reviews for peers to enhance code quality and ensure adherence to high standards.<br> Understanding the business side of the project and having the ability to lead in-depth technical and product discussions.<br> Bring new tools and invitations that can boost the startup productivity.<br> Requirements 5+ Years of experience in Software Engineering or adjacent fields.<br> 3+ Years of experience working fully remotely with a track record of self-management and accountability.<br> Hands-on experience with JavaScript/typescript and/or NodeJS/NestJs.<br> In-depth understanding of web application architecture and design principles behind the scalable applications.<br> Solid understanding of the Software Development Life Cycle (SDLC) and Agile methodologies.<br> Experience in designing and optimizing databases, with skills in query optimization, scaling, data modeling.<br> Advanced knowledge of Docker and AWS.<br></span> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Lead Process Engineer<br><br><p><b>Job Description</b></p><br><br><br><p><b>Position: Lead Process Engineer</b></p><br><br><p><b>Company: KBR </b></p><br><br><p><b>Project: Majnoon</b></p><br><br><p><b>Location: Basra. 28/28 rotation</b></p><br><br><br><p><b><i>"Belong, Connect, Grow, with KBR!</i></b></p><br><br><br><p><b><i>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</i></b></p><br><br><br><p><b><i>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets."</i></b></p><br><br><br><p><b>Position: Lead Process Engineer</b></p><br><br><p><b>Company: KBR </b></p><br><br><p><b>Project: Majnoon</b></p><br><br><p><b>Location: Basra. 28/28 rotation</b></p><br><br><br><p><b>Job Purpose</b></p><br><br><p>The Lead Process Engineer will own the technical integrity and successful delivery of process engineering scope across projects at different stages (Conceptual Studies, Front-End Design (FEED), and Detailed Engineering) for oil and gas field developments, including upstream offshore/onshore, gas treating, and downstream processing, in greenfield and brownfield environments. This role leads a team of engineers within a multidisciplinary project team, ensuring compliance with industry standards and project specifications, driving technical excellence, and fostering the development of Iraqi national staff.</p><br><br><br><p><b>Job Responsibilities</b></p><br><br><ul><li>Lead the preparation and review of process simulations and optimization studies for select/appraise stage projects, and champion the development of Process Flow Schemes with heat and mass balances, equipment sizing, layout, etc., for costing and option selection.</li><li>Own the detailed process engineering deliverables across all design phases, including Process Flow Diagrams, Piping &amp; Instrumentation Diagrams, Equipment Datasheets, Study Reports/Manuals, etc., ensuring alignment with international standards and project requirements.</li><li>Oversee the review of process design work by third parties (vendors) and other offices; champion participation in HAZIDs, HAZOPs, SIL, Hazard Analysis reviews, and audits; ensure timely issue resolution and closure.</li><li>Act as the primary technical interface with clients, communicating complex concepts clearly in both written and verbal formats; manage client expectations and confirm technical commitments.</li><li>Mentor and actively develop Iraqi national staff to fulfill process engineering roles, providing structured on-the-job training, performance feedback, and growth opportunities.</li><li>Ensure adherence to office quality and safety systems; lead the implementation of quality assurance/quality control practices within the process discipline.</li><li>Collaborate with other disciplines to drive on-time, efficient, and safe project delivery; lead technical risk management and issue resolution within the process scope.</li><li>Lead the technical supervision of FEED and Detailed Engineering activities for offshore/onshore greenfield/brownfield projects, ensuring design integrity and constructability.</li><li>Support procurement activities by providing authoritative technical input for equipment selection and vendor evaluation, including evaluation of bid technical clarifications.</li><li>Participate in commissioning and start-up activities, providing seasoned technical support and facilitating smooth handover to operations.</li></ul><br><p><b>Functional Responsibilities</b></p><br><br><ul><li>Maintain and further develop process engineering standards, best practices, and technical governance within the project teams.</li><li>Lead risk assessments and develop comprehensive mitigation strategies for process-related issues; own the risk register for the process discipline.</li><li>Ensure timely delivery of all process engineering deliverables in accordance with project schedules; manage resource planning and workload distribution within the team.</li><li>Provide technical leadership in design reviews, technical compliance, and governance for all process workstreams.</li><li>Support and guide procurement activities with robust technical input for equipment specifications, vendor selection, and qualification.</li><li>Lead commissioning and start-up activities from a process perspective, delivering technical support, commissioning procedures, and start-up readiness reviews.</li></ul><br><p><b>Technical Skills</b></p><br><br><ul><li>Extensive experience in FEED and Detailed Engineering design for offshore/onshore greenfield/brownfield projects.</li><li>Proficiency in process simulation software (e.g., Aspen HYSYS, Flare System Analyzer, ProMax, Pipesim, Pipenet, others).</li><li>Strong knowledge of process safety management and hazard analysis techniques.</li><li>Familiarity with relevant industry codes and standards (e.g., API, ASME, ISO).</li><li>Experience with process control systems and instrumentation.</li></ul><br><p><b>Soft Skills</b></p><br><br><ul><li>Leadership and team management skills.</li><li>Strong communication and interpersonal skills.</li><li>Ability to work collaboratively in a multidisciplinary environment.</li><li>Problem-solving mindset with a focus on innovation and efficiency.</li><li>Adaptability to changing project requirements and priorities.</li></ul><br><p><b>Qualifications</b></p><br><br><ul><li>Mandatory:&nbsp;Bachelor’s degree in engineering (Chemical, Process, or related field).</li><li>Preferred:&nbsp;Master’s degree in engineering (Chemical, Process, or related field) and/or membership of internationally accepted applicable professional Institute.</li><li>10 years of experience in process engineering within engineering Contractors, with a focus on FEED and EPC design for upstream onshore/offshore greenfield/brownfield projects.</li></ul><br><p><b>Work Environment</b></p><br><br><p>The role will be based in Iraq, requiring collaboration with local and international teams. The work environment is dynamic and fast-paced, necessitating flexibility and a proactive approach to challenges.</p><br><br><br><br><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Job Title: Control System Specialist Engineer<br> Location: Basra, Iraq<br> Duration: 12 months with possible extension.<br> Renumeration: Competitive day rate + Flight + Accommodation<br> 28x28 Rotation<br> <br> Department: This role will be reporting into the Maintenance &amp; Engineering team.<br> <br> The control systems engineer shall report to Instrument &amp; Control Team Lead and will be an integral member of a multi-discipline Engineering Department.<br> &nbsp;Responsibilities shall include:<ul><li>Provide technical control and safety system engineering support to client departments in the execution of brownfield and greenfield development projects, construction, operations and maintenance groups.</li><li>Participate in conceptual, basic, and detailed design activities.</li><li>Provide assurance on engineering compliance against pertinent standards, specifications, codes and regulations. Ensure that non-conformities and deviations are identified, risk assessed and mitigated.</li><li>Provide response to engineering and site queries in line with client specifications and best engineering practices.</li><li>Provide technical input to client management of change process. Carry out site surveys. Produce design and instrument, control and safety system work pack deliverables. Contents to include scopes of work, design/construction drawings, design calculations, system architecture, network configuration, control narrative, software design specification, HMI specification, alarm configuration, system I/O allocation, MTOs, task hazard assessments.</li><li>Provide support to develop and execute strategies to upgrade and expand existing control /safety systems.&nbsp;</li><li>Review and approve third-party engineering deliverables.</li><li>Produce material requisitions, technical bid evaluations, interfacing with vendors via procurement department</li><li>Provide support to activity planning and progress reporting.</li><li>Liaise and work closely with client instrument technical authority for guidance as necessary</li><li>Attend system testing, FAT, SAT and conduct technical audit/verification</li></ul><br> <br> Qualification:<ul><li>Bachelor’s degree in Instrumentation/Control /Electronics engineering</li><li>15+ years relevant experience in control and safety system engineering, including the design and operation of processing systems in the oil and gas industry.</li><li>Functonal safety certified from TUV/Exida or similar organization.</li><li>Experience in onshore operations, emerging areas / multicultural environments. Relevant experience in successive roles includes problem analysis, solution proposal, related working procedure draft and implementation.</li><li>Experience of engineering role in detailed engineering design, procurement, construction and commissioning of PLC, DCS, ESD, FGS, RTU, SCADA, HMI and Historian.</li><li>Sound knowledge on system topology and control networks RS232/485/422, Modbus, Ethernet, TCP/IP, SafetyNet, Control Net, DH+ etc and network security.</li><li>Experience on digital/smart oil field instrumentation and network.</li><li>Hands on experience on Emerson Delta-V ICSS and Alen Bradley Control logix.</li><li>Candidate to demonstrate familiarity with all relevant industry codes, standards, and practices (IEC, IEEE, ISA, API, ISO), for instrumentation &amp; control systems.</li><li>Candidate to demonstrate good presentation and effective interdisciplinary communication skills, capability of communication with all levels, manages with different cultural background.</li></ul><br> If you would like to know more about this opportunity, please send your most updated CV to erica.balde@nesfircroft.com&nbsp;<br>With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil &amp; Gas, Power &amp; Renewables, Chemicals, Construction &amp; Infrastructure, Life Sciences, Mining and&nbsp;Manufacturing&nbsp;sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients. <br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Process Engineer (Local Talent)<br><br><p><b>"Belong, Connect, Grow, with KBR!</b></p><br><br><br><p><b>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</b></p><br><br><p><b>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets."</b></p><br><br><br><p><b>Position title: </b>Process Engineer</p><br><br><p><b>Position status: </b>Local Talent</p><br><br><p><b>Position reports to: </b>Lead- Operation Support &amp; Process</p><br><br><p><b>Department: </b>O&amp;M Support</p><br><br><p><b>Rotation pattern: </b>28/28</p><br><br><br><p><b>Job purpose</b></p><br><br><br><p>Responsible for the process design, operation and implementation, improve industrial processes in order to maintain efficiency, reduce cost, improve sustainability and maximize profitability.</p><br><br><br><p><b>Duties and responsibilities</b></p><br><br><ul><li>Develop, configure and optimize industrial processes from inception through to start up and certification</li><li>Assess processes, take measurements and interpret data</li><li>Design, run, test and upgrade systems and processes</li><li>Develop best practices, routines and innovative solutions to improve production rates and quality of output</li><li>Perform process simulations</li><li>Manage cost and time constraints</li><li>Provide technical assurance to unit operations and ensure production plan delivery</li><li>Provide process documentation and operating instructions</li><li>Participate timely completion of Management of Change work (MOCs, medium to long term).</li><li>Utilise and perform maintenance of standardized monitoring tools to perform unit monitoring (Spreadsheets, or data historians like PI Process Book, etc).</li><li>Participate in special projects as required</li><li>Support Senior Operation Support Engineer as required</li><li>Consult technical specialist teams as required</li><li>Facilitate/ Pparticipate in HAZOP studies, and other safeguarding reviews</li><li>Utilize structured problem-solving techniques as appropriate: option analysis, RCA, etc</li><li>Ensure compliance with engineering related regulations and Shell standards</li><li>Promote and support compliance to Operating Integrity</li><li>Provide input into and support for the Integrated Activity Plan</li><li>Support Operations Reliability Improvement Process to ensure timely and appropriate corrective action has been taken to ensure repeat failures are eliminated</li></ul><br><br><p><b>Qualification &amp; Training requirements</b></p><br><br><ul><li>BSc. Degree in one of chemical or petrochemical engineering department.</li></ul><p><b>Experience </b></p><br><br><ul><li>A minimum of 5 years of proven working experience in Process Engineering.</li><li>Experience in process simulations, with working knowledge of process engineering software packages and Knowledge of process related standards.</li><li>Experience in different process industry, either upstream, downstream, gas plants or with engineering and construction major contractors.</li></ul><p><b>Language proficiency, computer and software skills</b></p><br><br><ul><li>Advanced knowledge of MS Office <b>Advance</b></li><li>Honey well Unisim <b>Intermediate</b> </li><li>PipeSim <b>Intermediate</b></li><li>Instrument Calc. tool <b>Intermediate</b></li><li>PI Process Book <b>Intermediate</b></li><li>English - Speaking, Writing and reading <b>Intermediate</b></li></ul><br><p><b>Skills</b></p><br><br><ul><li>Reading and updating process documents</li><li>Presentation skills</li><li>Problem Solving</li><li>Report Writing</li><li>Communication skills</li></ul><br><br><br> </div>

<p>Requirements &amp; Summary</p><ul><li>Skills : Process Management , Process Engineer</li><li>Other Skills : Process Safety Engineer, Safety Engineer, QAR, RAM, FEED, detailed design, safety-critical systems, process safety and risk management</li><li>Experience : 20 + Years</li><li>Education : Bachelors/3-5 yr Degree</li><li>Employment Type : Full Time Salaried Employee</li><li>Location : Iraq, Iraq</li></ul><p>Qualifications and Experience</p><ul><li>Education: Bachelor degree and above in Chemical Engineering or related discipline.</li><li>Experience: Minimum 20 years of experience in process safety and risk management for large oil, gas, or refining projects.</li><li>Technical Background: Strong expertise in process safety studies, QRA, RAM, safety-critical systems, and international safety standards.</li></ul><p>Competencies:</p><ul><li>Ability to integrate safety across disciplines and project phases</li><li>Strong analytical and risk assessment skills</li><li>Experience in multi-contractor project environments</li></ul><p>The Senior Process Safety Engineer is responsible for the governance and management of all process safety, risk management, and loss prevention activities throughout the full lifecycle of the integrated project. Acting on behalf of the Owner within the PMT, this role ensures that safety considerations are embedded in site selection, layout development, FEED, detailed design, construction, commissioning, and start-up. The Senior Process Safety Engineer oversees all safety studies, risk assessments, and safety-related design reviews, and ensures alignment with international standards, regulatory requirements, and Owner safety philosophy. The role includes oversight of PMC safety resources and coordination of safety inputs across all contractors and licensors.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Education: Bachelor degree and above in Chemical Engineering or related discipline.</li><li>Experience: Minimum 20 years of experience in process safety and risk management for large oil, gas, or refining projects.</li><li>Technical Background: Strong expertise in process safety studies, QRA, RAM, safety-critical systems, and international safety standards.</li><li>Competencies:</li><ul><li>Ability to integrate safety across disciplines and project phases</li><li>Strong analytical and risk assessment skills</li><li>Experience in multi-contractor project environments</li></ul></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Instrument &amp; Controls Lead Engineer<br><br><p><b>Instrument &amp; Controls Lead Engineer</b></p><br><br><p>ECSS40 - Principal Specialist, Commissioning</p><br><br><p>Rotation: 28/28</p><br><br><br><p>KBR Sustainable Technology Solutions (STS) provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design capabilities, and smart solutions to optimize planned and operating assets.</p><br><br><p>We are looking for an Instrument &amp; Controls (I&amp;C) Lead for an upcoming project. This role will work with our team of engineers to identify and define solutions that reduce risk and grow installed production capacity. This role will provide Instrument and Controls support for site operations while ensuring safe and effective operations through managing risk, addressing questions, and minor modification activities. The Instrument &amp; Controls Lead Engineer will be responsible for providing immediate front-line support for Operations and Maintenance teams to resolve minor issues and escalate more significant issues to the Central Engineering Team. This role will report to the Area Engineering Support Team Lead and will have I&amp;C Engineers as direct reports.</p><br><br><br><p><b>Responsibilities: </b></p><br><br><ul><li>Production Delivery, Optimisation &amp; Excellent Performance</li><li>Responsible for day-to-day optimization of I&amp;C systems to ensure safe, stable, and efficient process control, including loop tuning, alarm management, and SIS performance monitoring.</li><li>Identifies production vulnerabilities and optimization opportunities to support production forecast and grow IPC.</li><li>Ensure control systems are operated within their design and operating envelopes; any deviations are reported, risk assessed and managed via operational risk assessment processes.</li><li>Lead or support root cause investigations (e.g., 5 Whys, fault tree analysis) for I&amp;C-related process safety incidents, production losses, and product quality issues exceeding defined limits.</li><li>Prioritize I&amp;C vulnerabilities based on risk and production impact, ensuring corrective actions are focused on the highest-priority issues.</li><li>Actively lead Continuous Improvement projects involving instrumentation, automation, and control systems; promote CI philosophy and engage site teams to drive improvement initiatives.</li></ul><p><b>Qualifications:</b></p><br><br><ul><li>Above 10 Years experience in O&amp;G industry (Preferable with IOC’s direct or contract)  Technical degree in Engineering or relevant engineering subject.</li><li>Experience in previous asset engineering / operations engineering role  Practical exposure to production facilities.</li><li>Excellent communication, interpersonal and coaching skills  Strong bias for being proactive and getting results.</li><li>Excellent IT skills – Office suite, document management, applications for CMMS and Change Management.</li><li>Contribute to an environment in which all team members are respected regardless of their individual differences and are motivated to improve both their individual and team contributions to achieve desired business results.</li><li>Skilled in behaviour change management Not essential but preferable:  Professional (Chartered) Engineer.</li><li>Experience in roles in culturally and linguistically diverse working environments</li></ul><br><p><b>Preferred Qualifications:</b></p><br><br><ul><li>Certified Professional Engineer</li></ul><br><p><b>Belong. Connect. Grow. with KBR! </b></p><br><br><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Position: Principal Well Engineer <br> Department: Wells<br> Location: Basra, Iraq<br> Duration: 12 months renewable <br> Rotation: 28/28<br> <br> <strong>Role synopsis</strong>&nbsp;<br> <br> The Principal Well Engineer reports to the Well Engineering Manager (WEM). The role will be responsible for supplying well engineering and well operation support across the Wells department. Responsibilities include the development and implementation of a bespoke Wells Management System (WMS), engineering and management of integrated well engineering projects across the drilling, workover and well services functions as well as providing peer review and guidance to the wider WE community.<br> <br> The individual shall have a broad experience base across drilling, workover and well services with a main experience base in one or more of these areas. A thorough understanding of Wells organisations and management systems in complex operations will be required; similarly a strong working relationship with the wells operations teams, subsurface, HSE, base management, reservoir engineering and contractors is essential. The individual should be adaptable and demonstrate a willingness to apply themselves across various wells functions.<br> <strong>Key accountabilities</strong>&nbsp;<ul><li>Creation, review and update of documents within the Wells Management System (WMS), standards and BOD’s under the direct guidance of the WEM</li><li>Project management and engineering of integrated engineering projects across the drilling, workover and well service functions working with various teams and stakeholders across multiple teams and departments.</li><li>The identification, evaluation and application of value enhancing, innovative and new technologies and continuous improvement initiatives across the Wells teams.</li><li>Lead problem-solving sessions with delivery teams, engineering and service providers to resolve challenges and manage change.</li><li>Consolidate performance reporting across Wells, structuring input from the various functions and presenting this in a clear and meaningful way on a regular basis.</li><li>Focal point for wellheads and Xmas trees contracts. Includes preparation and evaluation of tenders. Technical design and review ensuring fit-for-purpose design. Operational oversight.</li><li>Focal point for OCTG contracts. Includes preparation and evaluation of tenders. Technical design and review ensuring fit-for-purpose design.</li><li>Develop and initiate a WMS self-verification process.</li><li>Participate in HSE &amp; NPT incident root cause analysis, investigations and reporting.</li><li>Participate in planning of well control exercises.</li><li>Arrange and facilitate contractor performance improvement meetings as and when required.</li><li>Assurance of the technical integrity of operations and compliance with in-country law, policy, international standards and guidelines.</li><li>Develop (annual) WE departmental objectives for inclusion in AOP and report on progress throughout the year.</li><li>Initiate and or contribute to engineering research projects.</li><li>Provide additional technical input and support to various wells teams when required.</li></ul><strong>Criteria and Qualifications</strong><ul><li>Possesses international experience in the oil &amp; gas industry.</li><li>Educated to Bachelor of Science (Engineering) degree level, or equivalent.</li><li>A broad engineering and operations experience across drilling, workover, well services and well integrity with a main experience base in one or more of these areas.</li><li>Team player, fluent in English language with strong communication skills is essential.</li><li>Strong leadership.</li><li>Good interpersonal skills – peer reviews/consultation</li><li>Experience in developing, maintenance and improvement of Integrated Management Systems in the wells sphere.</li><li>Experience working for an international major operator preferred.</li><li>Knowledge of tender preparation and evaluation of wells contracts.</li><li>Effective and proficient communicator, both verbal (English language) and written.</li><li>Maintains a high standard of business integrity, professional behaviour and confidentiality.</li><li>Experience in PowerBI and Sharepoint.</li><li>Experience working in a Joint Venture environment and in a remote location.</li><li>Experience in tendering &amp; contracting. Demonstratable history of being part or leading a Technical Evaluation Team for tender evaluation (Technical only).</li><li>Experience working on land operations, and in the Middle East would be considered beneficial.</li></ul><br>With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil &amp; Gas, Power &amp; Renewables, Chemicals, Construction &amp; Infrastructure, Life Sciences, Mining and&nbsp;Manufacturing&nbsp;sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients. <br><br> </div>

<p>The Water Injection Engineer will be responsible for designing, developing, and optimizing water injection systems to support enhanced oil recovery (EOR) and reservoir pressure maintenance. The role includes conducting hydraulic analysis and simulation modeling, monitoring system performance, optimizing injection efficiency, preparing engineering documentation, supporting commissioning and start-up activities, and ensuring compliance with HSE, environmental, and industry standards. The successful candidate will work closely with reservoir, production, and operations teams to improve field performance and mentor junior engineers.</p><p>Bachelor's degree in Petroleum Engineering, Chemical Engineering, Mechanical Engineering, or a related engineering discipline; a Master's degree is an advantage. Minimum of 10 years of experience in water injection engineering within the Oil & Gas industry. Strong expertise in enhanced oil recovery (EOR), reservoir pressure maintenance, hydraulic analysis, water treatment systems, pipeline hydraulics, and injection well performance. Proficient in Aspen HYSYS, PIPEPHASE, OLGA, or equivalent simulation software. Excellent analytical, project management, communication, and troubleshooting skills. Professional Engineer (PE) registration or equivalent certification is preferred.</p>

<p>The Water Injection Engineer will be responsible for designing, developing, and optimizing water injection systems to support enhanced oil recovery (EOR) and reservoir pressure maintenance. The role includes conducting hydraulic analysis and simulation modeling, monitoring system performance, optimizing injection efficiency, preparing engineering documentation, supporting commissioning and start-up activities, and ensuring compliance with HSE, environmental, and industry standards. The successful candidate will work closely with reservoir, production, and operations teams to improve field performance and mentor junior engineers.</p><p>Bachelor's degree in Petroleum Engineering, Chemical Engineering, Mechanical Engineering, or a related engineering discipline; a Master's degree is an advantage. Minimum of 10 years of experience in water injection engineering within the Oil & Gas industry. Strong expertise in enhanced oil recovery (EOR), reservoir pressure maintenance, hydraulic analysis, water treatment systems, pipeline hydraulics, and injection well performance. Proficient in Aspen HYSYS, PIPEPHASE, OLGA, or equivalent simulation software. Excellent analytical, project management, communication, and troubleshooting skills. Professional Engineer (PE) registration or equivalent certification is preferred.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Job Title: Lead Process Safety Engineer<br> Department / Function: Maintenance &amp; Engineering <br> Duration: 12 months renewable<br> Location: Basra, Iraq<br> Rotation: 28/28<br><strong>Role Synopsis</strong><br>An outstanding opportunity for a highly motivated individual to join an exciting division. This role will have the opportunity to contribute in a positive way to help build a sustainable future for the client and the people of Iraq. The Lead Process Safety Engineer (LPSE) will be a member of the Central Engineering Team reporting into the Process Safety Team Lead (PSTL). The LPSE will provide deep process safety engineering expertise and judgment in service of the operation and development of the Rumaila field. The LPSE shall work closely with Projects and Area Operations to ensure efficient handover of all issues that require process safety engineering input to resolve.<br>The incumbent is expected to assist the PSTL with the Process Safety programme for the Rumaila Operation and help champion all aspects of good Process Safety management in an aging oilfield.<br> <br><strong>Key Accountabilities</strong><br><ul><li>Promote a culture of process safety and continuous improvement.</li><li>Assist the PSTL with the nationalisation program and support professional development of Iraqi nationals.</li><li>Provides process safety engineering expertise to support the wider organisation through engineering guidance and by performing and reviewing complex, or non-routine process safety engineering calculations, risk assessment and analyses.</li><li>Provides process safety engineering expertise to EQs, MoCs and Projects including coordination with Production / Operations/ Maintenance staff to identify / prioritise engineering activities.</li><li>Provide assurance on process safety engineering compliance with applicable Standards, Specifications, Codes and Regulations within organisation and 3rd Ensure that non-conformities and temporary deviations are identified and assessed.</li><li>Perform / review risk and consequence analysis and where required coach others on the use of risk analysis and consequence modelling techniques such as QRA, FERA, Explosion Modelling, Fire and Gas Mapping using industry standard software such as PHAST</li><li>Where required facilitate and participate in process safety design reviews and safety studies such as HAZOP and HAZID/ENVID.</li><li>Working knowledge of functional safety concepts and the application of industry standards e.g. IEC61508/11, in design and operational phases.</li><li>Ensures critical process safety documentation and information, e.g. Bowtie diagrams are kept up to date.</li><li>Assists with the reviews of the impact of emerging risks.</li><li>Communicates process safety engineering lessons learned and encourages a culture of sharing experience and continuous improvement.</li><li>Where required, provides process safety engineering expertise in performing incident investigations and defect investigations.</li><li>Provides process safety engineering expertise to delivery of regional actions. Leads on resolution of complex, multi-discipline technical issues where the dominant component is process safety related.</li></ul><strong>Essential Education</strong><br>Degree / diploma qualified engineer or equivalent work experience. BSc, BEng or MEng (UK), BSc (US), or international equivalent in Chemical / Process Engineering or other relevant engineering subject.<br>Professional accreditation, such as Professional Engineer or Chartered Engineer.<br><strong>Essential experience and job requirements</strong><br>At least 15 years industry experience with 5 years in international multicultural operational roles across the full value chain of hydrocarbon and water production facilities. Experience in brownfield operations process safety engineering, reliability, modifications and strong technical leadership with influencing capabilities. <br>An ability to work effectively with other disciplines / teams to understand and assess complex issues and develop pragmatic solutions.<br>Proven ability in practical application of engineering standards and practices for process safety engineering. Candidate to demonstrate familiarity with all relevant industry process safety engineering codes, standards, and practices (API, ASME, ISO etc.), and relevant experience with key process safety engineering tools such as Phast, Bowtie XP, Aspen HYSYS &amp; Flare System Analyser.<br><strong>Desirable criteria and qualifications</strong><br><ul><li>Key skills include communication, interpersonal relationships, facilitation, influencing, and negotiating across department.</li><li>Ability to develop others and foster diverse relationships in a multicultural environment.</li><li>Ability to identify correct priorities of maintenance and engineering support activities.</li><li>Ability to Identify and assess process safety hazards.</li><li>Ability to speak Arabic would be beneficial but not essential.</li></ul><strong>Other Requirements</strong><br><ul><li>A passion and relentless drive for continuous improvement.</li><li>Strong use of IT systems to analyse data, and produce reports &amp; KPI’s etc.</li><li>Strong interpersonal skills with experience influencing operating teams and contractors.</li><li>Strong cultural awareness.</li><li>Able to prioritise work in a high activity environment.</li><li>Able to work within a multidisciplinary team.</li><li>Ability to handle multiple tasks with minimal supervision.</li><li>Strong bias for being proactive and getting results.</li><li>Demonstrate planning, organizational and communication skills.</li></ul><br>With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil &amp; Gas, Power &amp; Renewables, Chemicals, Construction &amp; Infrastructure, Life Sciences, Mining and&nbsp;Manufacturing&nbsp;sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients. <br><br> </div>

<p>The Process Engineer will be responsible for designing, analyzing, and optimizing oil and gas processing systems to improve operational efficiency, safety, and reliability. The role involves developing process simulations, preparing engineering documentation including P&IDs and equipment specifications, conducting risk assessments and feasibility studies, supporting construction, commissioning, and start-up activities, and collaborating with multidisciplinary teams to integrate new technologies into existing facilities. The successful candidate will also ensure compliance with API, ASME, ISO, and environmental regulations while providing technical guidance and training to operations personnel.</p><p>Bachelor's degree in Chemical Engineering, Mechanical Engineering, Petroleum Engineering, or a related engineering discipline; a Master's degree is preferred. Minimum of 10 years of experience in oil and gas process engineering with expertise in processing facilities and system integration. Strong knowledge of HYSYS, PIPESIM, or similar process simulation software. Solid understanding of thermodynamics, fluid dynamics, process control, and international engineering standards including API, ASME, and ISO. Excellent analytical, project management, communication, and teamwork skills with the ability to work in multicultural environments.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Lead Mechanical Engineer<br><br><span><u><b>Lead Mechanical Engineer</b></u></span><b>EFLD35 - Principal Technical Professional - Field Engineering</b><br>KBR Sustainable Technology Solutions (STS) provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design capabilities, and smart solutions to optimize planned and operating assets.<b><u>Responsibilities:</u> </b>• Day to day delivery of Mechanical Engineering support for site operations.• Deliver safe and effective operations by managing risks, addressing queries and minor modifications activities.• Collaborates with Central Engineering team to identify and define engineering solutions to reduce risk and grow installed production capacity.• Promotes a culture of open safety reporting and continuous improvement.• Provides immediate front line support for Operations and Maintenance teams to resolve minor issues and escalate more significant issues to the Central Engineering Team.• Ensures asset Mechanical Engineering risks (both static and rotating) are understood, controlled, managed and reduced.• Participates in a variety of asset and project risk assessments• Input into anomaly assessment and resolution plans.• Monitors condition monitoring data and health of static and rotating equipment and associated operating envelopes, recording and investigating all Safe Operating Limit excursions.• Monitors static/rotating equipment KPIs and initiates corrective actions as necessary.• Provides Mechanical support to technical MoCs and Engineering Queries• Acts as technical interface with Projects and Modifications organisation, including development of Statement of Requirements (SOR) and Project Initiation Requests (PIRs) and Decision Support Packages (DSP)• Supports delivery of Production Efficiency Improvement and Defect Elimination processes (including simple investigations for deferrals and vulnerabilities)• Identifies production vulnerabilities and optimization opportunities to support production forecast and grow IPC.• Performs follow-up actions and observations from self-verification checks that are related to Mechanical Engineering• Participates in Start Up Readiness and Assurance Reviews• Provides coaching to junior engineers.<br><u><b>Experience, Qualifications &amp; Key Skills</b></u>• Above 10 Years experience in O&amp;G industry (Preferable with IOC’s direct or contract)• Professional (Chartered) Engineer Preferred• Technical degree in Mechanical Engineering or allied engineering subject.• Experience in previous asset engineering / operations support engineering role• Practical exposure to production facilities• Excellent communication, interpersonal and coaching skills• Strong bias for being proactive and getting results• Excellent IT skills – Office suite, document management, applications for CMMS and Change Management.• Contribute to an environment in which all team members are respected regardless of their individual differences and are motivated to improve both their individual and team contributions to achieve desired business results• Skilled in behavior change management<br><u><b>Preferred Qualifications:</b></u><ul><li>Certified Professional Engineer</li></ul><br><p><b>Belong. Connect. Grow. with KBR! </b></p><br><br><br><br><br> </div>

<p>The Process Engineer will be responsible for designing, analyzing, and optimizing oil and gas processing systems to improve operational efficiency, safety, and reliability. The role involves developing process simulations, preparing engineering documentation including P&IDs and equipment specifications, conducting risk assessments and feasibility studies, supporting construction, commissioning, and start-up activities, and collaborating with multidisciplinary teams to integrate new technologies into existing facilities. The successful candidate will also ensure compliance with API, ASME, ISO, and environmental regulations while providing technical guidance and training to operations personnel.</p><p>Bachelor's degree in Chemical Engineering, Mechanical Engineering, Petroleum Engineering, or a related engineering discipline; a Master's degree is preferred. Minimum of 10 years of experience in oil and gas process engineering with expertise in processing facilities and system integration. Strong knowledge of HYSYS, PIPESIM, or similar process simulation software. Solid understanding of thermodynamics, fluid dynamics, process control, and international engineering standards including API, ASME, and ISO. Excellent analytical, project management, communication, and teamwork skills with the ability to work in multicultural environments.</p>