Materials Engineer Jobs

<p>Job Responsibilities:</p><p>1. Review installation quality of ATC equipment and complete pre-power-on acceptance; verify power supply, signal links and earthing systems to meet civil aviation standards for equipment power-on commissioning.</p><p>2. Conduct standalone power-on, hardware self-test, program loading, parameter configuration and functional commissioning for VHF air-ground communication, intercom dispatching, ATC recording, secondary radar surveillance, surface surveillance and ATC automatic processing systems.</p><p>3. &nbsp;Perform cross-discipline joint commissioning across multiple systems to realize data interconnection, business linkage and signal synchronization among ATC automation, radar surveillance, air-ground communication and dispatching intercom systems.</p><p>4. Test main/standby redundancy switching, fault alarms, emergency switchover and business fault tolerance functions to ensure uninterrupted air traffic control operations.</p><p>5. Support flight calibration of ATC systems, track calibration parameters, optimize equipment settings and rectify non-compliant items to align with civil aviation operational technical standards.</p><p>6. &nbsp;Provide on-site support during the trial operation of full ATC systems; real-time monitor radar targets, air-ground communication channels, automated flight tracks and dispatching workstation status.</p><p>&nbsp;</p><p>Job Requirements:</p><p>1. Bachelor’s degree or above, major in Electrical Engineering, Automation or related fields; graduates from 985/211 universities are preferred.</p><p><strong>2. </strong>Fluent in English.</p><p><strong>3. </strong>3Minimum 3–5 years of commissioning and operational experience on at least one 4D or higher-class civil aviation airport.</p><p><strong>4. </strong>4Proficient in technical standards and specifications issued by ICAO (International Civil Aviation Organization) and CAAC (Civil Aviation Administration of China).</p><p><strong>5. </strong>Capable of multi-system interface coordination; able to resolve issues involving system communication, protocol docking and building automation.</p><p><strong>6. </strong>Experience in commissioning weak current systems, information integration, BHS baggage handling, security inspection, ATC, meteorology and related systems.</p><p>&nbsp;</p><p><strong>7. </strong>Strong communication and coordination skills, high sense of responsibility, excellent execution and team spirit.8. Good physical health and willingness to work overseas.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Conduct thorough testing of software applications (web and mobile) to ensure compliance with quality standards, Record test results. Develop and execute comprehensive test plans, test cases, and test scripts to validate functionality, performance, and usability. Identify, document, and report software defects; collaborate with developers to ensure timely resolution. Perform regression testing to confirm that resolved issues remain fixed in subsequent releases. Provide constructive feedback to improve overall software quality and user experience. Collaborate with cross-functional teams (development, system administration, product management) to resolve technical challenges during the software development lifecycle. Manage and prioritize incidents requiring specialized technical expertise based on business impact and severity</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelor s degree in computer science, Engineering, or related field, or equivalent work experience. Minimum 1 year of experience in software quality assurance and testing methodologies. Proven experience with web and mobile application testing. Familiarity with Agile development methodologies and tools (e.g., Jira, Scrum) is a plus. Good understanding of software QA methodologies, tools, and processes. For example manual testing, automated testing. Experience with test automation frameworks and scripting languages (e.g., Python, Shell) is a plus. Proficiency in troubleshooting and diagnosing technical issues</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><b>Main Duties and Responsibilities:</b></p> <ul> <li>Ensures compliance with the company's policies and standards.</li> <li>Identifies high-risk situations, reviews risk analysis, adopts a risk mitigation approach to the program, and discusses with the WS Team.</li> <li>Leads in HSE and non-conformance event investigations and reporting as required</li> <li>Responsible for ensuring that key projects and engineering duties are fulfilled.</li> <li>Assign tasks to engineers.</li> <li>Provide engineering experience, expertise, and leadership to the WS Department.</li> <li>Review the well services programs, including full contribution and QA/QC, to ensure the highest standard is generated by the Engineering Team.</li> <li>Manage continuous improvement through integration of learnings, best practice and benchmarking data.</li> <li>Coordination of in-house technical support and external well service technical support</li> <li>Review required AFEs of WS activities.</li> <li>QA/QC of all pre-job technical calculations within Programs.</li> <li>Daily engineering and troubleshooting support to the Well Services Operations Team</li> <li>Training and mentoring of local and junior staff engineers.</li> <li>Liaise with Service Providers and Contractors with regard to inventory and equipment needs aligned with short- and long-term Rig/Well scheduling and planning</li> <li>Must be flexible to support extended operations beyond a normal working day when required</li> <li>Be proactive in anticipating well ops challenges and be quick and effective when reacting to issues.</li> <li>Preparing programs/AFEs, as well as reviewing them.</li> </ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Requirements:</p> <ul> <li>Bachelor s degree in engineering.</li> <li>Minimum 15 years experience, including completions, workovers, stimulation, and well intervention operations at an Engineering level, with at least a substantial amount spent at the supervisor level.</li> <li>Safety courses are required to carry out work at the site and in accordance with company policy, and as required by Country law and regulations.</li> <li>Must be able to work with a team, take directions from line manager(s), and focus attention on details.</li> <li>Must be self-motivated and capable of working with limited direct supervision.</li> <li>Must be capable of completing and tracking multiple tasks simultaneously, and often under tight deadlines.</li> <li>Detailed understanding of best industry practice on engineering of well integrity during well service operations.</li> <li>Ability to solve complex problems in an innovative and cost-effective manner.</li> <li>Ability to work effectively with others.</li> <li>Good communication skills.</li> <li>Can work in a multi-national environment.</li> <li>Demonstrates commitment to HSSE policy and statement and knows and understands expectations as detailed in the HSSE Management System.</li> <li>Develops highly positive relationships with both field and office teams.</li> <li>Looks beyond the obvious in problem-solving.</li> <li>Provide support to WS Managers/Superintendents when required on technical matters.</li> <li>Ensures cost-effective use of services and equipment.</li> <li>Maintains a strong focus on progress towards the achievement of objectives.</li> <li>Demonstrates a high level of competence in leading others.</li> <li>Workover operations.</li> <li>Well Completions.</li> <li>Well Interventions incl. Coiled Tubing and Slickline operations.</li> <li>Knowledge of stimulation.</li> <li>Fishing cased hole.</li> <li>Well control.</li> </ul><p></p></section>

شركة فليكس، الشركة الرائدة في مجال التعبئة والتغليف المرن، تعلن عن حاجتها إلى مهندس ميكانيكا للانضمام إلى فريق الميكانيكا&nbsp;بمصنعها في مدينة 6 أكتوبر، وذلك وفقًا للشروط التالية:<br><br>حاصل على بكالوريوس هندسة ميكانيكية.<br><br>خبرة من 3 إلى 5 سنوات في المصانع.<br><br><strong>المتطلبات العامة:</strong><br>إجادة اللغة الإنجليزية بطلاقة.<br>مهارات تواصل قوية جدًا.

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Job Title: Inventory / SCM Location: Iraq Experience: 3 5 Years Job Summary We are seeking an experienced Inventory / SCM Support Engineer to support warehouse operations, inventory validation, and ERP-based supply chain processes. The ideal candidate should have hands-on experience with Oracle, SAP, or IBM Maximo , along with strong knowledge of warehouse operations, barcode/RFID technologies, and physical inventory verification. Key Responsibilities Perform inventory validation and physical stock verification. Support warehouse mapping and material master data validation. Troubleshoot barcode scanners, RFID devices, and warehouse hardware. Execute inventory transactions and reconciliation in Oracle, SAP, or Maximo. Identify and resolve inventory discrepancies. Support warehouse system testing, implementation, and on-site validation. Coordinate with warehouse, logistics, and IT teams to ensure inventory accuracy.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor's degree in Supply Chain, Logistics, Engineering, IT, or a related field.</li><li>3 5 years of experience in warehouse operations or SCM systems.</li><li>Hands-on experience with Oracle SCM, SAP MM/WM/EWM, or IBM Maximo .</li><li>Strong knowledge of inventory control, warehouse operations, and material management.</li><li>Experience with barcode/RFID devices and warehouse hardware troubleshooting.</li><li>Strong analytical, communication, and problem-solving skills.</li><li>Preferred Experience in Oil &amp; Gas, Industrial, or Large Enterprise environments.</li><li>Oracle, SAP, Maximo, or Supply Chain certifications are an advantage.</li></ul><p></p></section>

<p><strong>About the company:</strong></p><p>iMaker Group is a renowned for its expertise in luxury villas, hospitality, and commercial developments.&nbsp;</p><p>We are a dynamic consortium of companies offering comprehensive services in master planning, architecture, interior design, construction, project management, and the sourcing of furniture and materials.&nbsp;</p><p>With operations spanning Dubai, London, Riyadh, Miami, and Cairo. iMaker Group delivers diverse projects on a global scale.&nbsp;<br>&nbsp;</p><p><strong>Summary of the role:</strong></p><p>The Project Manager will be responsible for overseeing finishing tasks in construction projects, including coordinating with design teams, managing budgets, sourcing and inspecting materials, and ensuring compliance with project specifications. It requires liaising between contractors, suppliers, and owners, monitoring the implementation of key construction phases, and ensuring quality across interior and exterior works.</p><p>&nbsp;</p><p><strong>Key responsibilities:</strong></p><ul><li>Collaborate with the team to understand design specs and create detailed finishing schedules.</li><li>Assist in developing and managing the finishing budget, tracking expenses and variances.</li><li>Source, procure, and inspect materials for quality and compliance with project requirements.</li><li>Coordinate with contractors and owners, securing material samples and reviewing offers.</li><li>Act as a liaison between design teams, subcontractors, and suppliers; provide regular updates.</li><li>Oversee project implementation, including contractor offers, scheduling, planning, and material approval. Review and approve shop drawings and supervise key construction works (excavation, carpentry, concrete, insulation, etc.), ensuring quality and compliance with engineering drawings.</li><li>Oversee all finishing tasks, including exterior and interior works (facades, plastering, painting, woodwork, electrical, plumbing, HVAC, landscaping, pool, etc.) to ensure it meets design specifications and industry standards.</li><li>Verify executed quantities and coordinate overlapping works.</li><li>Enforce safety protocols and ensure compliance with local building codes and regulations.</li><li>Identify and resolve issues in finishing work, proposing solutions to improve efficiency.</li><li>Maintain accurate records of progress, inspections, and change orders; generate required reports.</li><li>Supervise and guide subcontractors and laborers, fostering a productive work environment.</li><li>Draft and audit contracts, review schedules, and ensure timely work completion.</li><li>Manage work receipt with proper documentation and owner approval.</li><li>Submit daily and weekly progress reports to Line Manager.</li><li>Perform other duties as assigned by Management.</li><li>Stay informed on the latest trends, materials and technology in the design industry to keep our projects at the forefront of innovation.</li></ul><p>&nbsp;</p><p><strong>Education and Experience:</strong></p><ul><li>Bachelor’s degree in Architecture, Construction Management, or Civil Engineering field.</li><li>Project Management Professional (PMP) or equivalent is preferable.</li><li>12+ years of professional experience in Project Management with a focus on high-end projects working on budgets, procurement, and coordinating with contractors and design teams.</li></ul><p>&nbsp;</p><p><strong>Knowledge, Skills and Abilities:</strong></p><ul><li>Proficient in using AutoCAD, SketchUp, and Project management software.</li><li>Arabic speaking is a must.</li><li>Strong project management, organizational, and budgeting skills.</li><li>Proven track record of delivering interior and exterior projects.</li><li>Strong leadership and team coordination abilities.</li><li>Excellent client-facing communication skills.</li><li>Creative and strategic mindset with ability to think innovatively and execute complete design concepts.</li><li>Proactive in identifying and resolving project issues.</li><li>Strong organizational and multitasking abilities, with a high attention to detail.</li></ul><p>&nbsp;</p><p><strong>Working conditions and Environment:</strong></p><ul><li>The position is site based in Baghdad, Iraq.</li><li>The position may have occasional international travel requirements.</li></ul><p>&nbsp;</p><p><strong>Success Metrics &amp; KPIs:</strong></p><ul><li>Client Satisfaction score after handover: Client feedback score after milestones/handover.</li><li>Weekly progress reporting: Timely submission of accurate weekly site reports.</li><li>Budget and material control: Actual project cost vs. approved budget.</li><li>Project completion on schedule: % of project milestones achieved on or before planned dates.</li><li>Subcontractor performance management: Evaluate subcontractors based on quality, timeline, and coordination.</li><li>Problem-solving &amp; escalation: Timely identification and resolution of site issues.<br>&nbsp;</li></ul><p><strong>What We Offer?</strong></p><ul><li>Opportunities to work on high-profile, international projects.</li><li>A chance to work in a collaborative, creative work environment that fosters innovation.</li><li>Opportunities for career growth and professional development.</li><li>Competitive salary and benefits package.</li></ul>

<p><h4>Belong, connect, grow, with KBR!</h4> <p>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</p> <p>KBR provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Location</h4> <p>Iraq - KBR office<br> 28/28 rotation</p> <h4>Job purpose</h4> <p>Define piping design bases, codes, standards, and deliverables to ensure safe, reliable, and cost-effective solutions.<br> Single point of contact for piping deliverables and activities related to piping materials.<br> Interface with client, vendor, and other stakeholders for successful execution of the project.<br> Coordinate with multi-disciplinary teams (process, mechanical, civil, electrical, instrumentation) and vendors to ensure integrated piping systems.<br> Mentor engineers, drive quality, and ensure schedule adherence for piping deliverables across project phases.</p> <h4>Key responsibilities</h4> <ul> <li>Develop and review piping design basis, piping material specifications, datasheets, and technical bid evaluations.</li> <li>Ensure compliance with applicable codes and standards and project-specific requirements.</li> <li>Develop standard deliverables, various datasheets, and requisition packages related to piping.</li> <li>Experience in non-metallic piping (GRE / HDPE) procurement and specifications.</li> <li>Provide in-depth technical support for material selection involving metallic and non-metallic piping systems.</li> <li>Participate in material selection and corrosion review sessions to ensure suitable materials for service conditions.</li> <li>Review and approve technical deliverables (isometrics, P&IDs, BOMs, MOC/Change Notes, design change requests, technical queries).</li> <li>Demonstrated knowledge of material tracking throughout the project cycle.</li> <li>Understand the MOC process and employ effective change management throughout the lifecycle of the project.</li> <li>Contribute to lessons learnt from the project.</li> <li>Report to department manager/lead engineer for the project.</li> </ul> <h4>Experience</h4> <ul> <li>12+ years of experience in concept, FEED and detail engineering and EPCM experience in the oil & gas industry.</li> <li>Experience with Middle East clients like ADNOC, BP, BOC, PDO, Total Energies & Qatar Energies is highly preferred.</li> <li>Familiarity with onshore and offshore facilities and carried out greenfield and brownfield projects.</li> <li>Experience working with multicultural project teams across various project execution centers.</li> <li>Familiarity with international piping codes and standards such as ASME B31.3, ASTM, API, and NACE MR0175/ISO 15156.</li> </ul> <h4>Qualifications</h4> <ul> <li>Master or bachelor of engineering in a related field.</li> <li>Professional membership or relevant certifications (e.g., PE/Chartered Engineer) are a plus.</li> <li>Certification related to piping design or stress analysis is advantageous.</li> </ul> <h4>Technical skills</h4> <ul> <li>Strong background in piping design, engineering, stress analysis, and support design.</li> <li>Proficiency with piping design software and calculation tools (e.g., CAESAR, AutoPIPE and 3D modeling tools).</li> <li>Technical experience to prepare manhours estimation for different types of piping activities and deliverables of different phases of the project like select phase, FEED and execution.</li> <li>Familiarity with codes, standards, regulations and practices applicable to the design and construction of various facilities.</li> <li>Hands-on knowledge of codes and standards relevant to piping.</li> <li>Experience with high-pressure piping, thermal insulation, coatings, and corrosion considerations.</li> <li>Diverse working experience in project management, conceptual, FEED and detailed design, and construction.</li> <li>Knowledge of interdisciplinary work processes, interfaces, and deliverables.</li> <li>Responsible for the training and development of engineers in his/her team.</li> <li>Adherence to company processes and procedures and handle internal and external project audits.</li> <li>Proven experience in vendor qualification, technical bid evaluation, and factory audits.</li> </ul> <h4>Soft skills</h4> <ul> <li><strong>Communication:</strong> Clear, concise communication with technical and non-technical stakeholders.</li> <li><strong>Problem solving:</strong> Proactive identification and mitigation of piping-related risks.</li> <li><strong>Project management:</strong> Planning, scheduling, risk management, and deliverable tracking.</li> <li><strong>Influence & collaboration:</strong> Effective collaboration with clients, vendors, and internal teams.</li> <li><strong>Adaptability:</strong> Comfort in dynamic project environments and changing technical requirements.</li> <li><strong>Attention to detail:</strong> Rigorous approach to reviews, calculations, and documentation.</li> <li><strong>Safety mindset:</strong> Commitment to health, safety, and environment (HSE) standards.</li> <li><strong>Critical thinking:</strong> Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems.</li> </ul></p><p></p>

<p>The Chief Engineer will be based at one of the Amentum sites in Iraq and serve the Operations and Maintenance Support Services (OMSS) contract in support of the U.S. Department of State.</p><p>The Chief Engineer is responsible for all water purification, water storage, water distribution and wastewater treatments, as well as generators, and associated power generation, transmission and distribution equipment.</p><p>The Chief Engineer is also responsible for the safe operation and maintenance of power plants, generators, compressors, air conditioning systems, etc., and operates industrial machinery and equipment in various forms.</p><p>The duties and responsibilities listed are representative of the nature and level of work assigned and are not necessarily all inclusive.</p><p><b><br></b></p><p><b>DUTIES:</b></p><ul><li>Responsible for maintaining a safe workplace and ensuring safety is the highest priority in the workplace.</li><li>Comply with all Environmental &amp; Safety and Quality Assurance requirements and goals.</li><li>Provide information and materials to these divisions as necessary to ensure adequate and legal documentation.</li><li>Responsible for managing, monitoring and tracking physical plant and building operations services.</li><li>Supervise and oversee the operations of the water and wastewater treatment plants to include all water quality laboratory, pumping, filtering, piping and control systems.</li><li>Ensure the viability, availability and safety of water treatment and waste distribution systems.</li><li>Maintain water well operations and water storage systems.</li><li>Manage water treatment waste stream to contractual standards.</li><li>Oversee the: Prime power and water/wastewater treatment programs; Operation, calibration, diagnostics, troubleshooting and repairs to all mechanical, electrical equipment systems and electrical/pneumatic control systems.</li><li>Preventative maintenance, condition monitoring, repair, installation and modernization of all power generation, transmission and distribution equipment on site; and Support of prime power generators made by Caterpillar, Cummins, Perkins, FG Wilson and other manufacturers, with outputs ranging from 20KW up to 160KW.</li><li>Provide daily guidance and direction to supervisors, operators, mechanics and technicians.</li><li>Perform scheduled and unscheduled inspections.</li><li>Report any malfunctions or lack of compliance with SOW to the Chief Engineer.</li><li>Assist in developing the SOW when requested, including diagrams and specifications in compliance with Overseas Building Operations (OBO), Environmental Protection Agency (EPA), Occupational Safety and Health Administration (OSHA) and National electric Code (NEC) standards.</li><li>Maintain effective, timely and respectful communication and interaction with other employees and managers and support other organizations.</li><li>Perform administrative tasks including ordering material, inventorying and scheduling work.</li><li>Manage logistics, stock levels and workflow processes.</li><li>Collect, analyze and summarize data for report preparation and submit written reports.</li><li>Maintain appropriate technical library and record keeping, which documents all procedures necessary to accomplish assigned responsibilities.</li><li>Responsible for facility custodianship of work area and management of tools, equipment and spare parts.</li><li>Take initiative to analyze situations and make frequent technical decisions based on specifications, safety and electrical codes.</li><li>Evaluate operational effectiveness and develop/maintain effective operational control mechanisms.</li><li>Responsible for allocating and managing staff resources according to changing needs</li><li>Identify problem areas and respond to mission requirements to perform task order requirements.</li><li>Plan and manage projects.</li><li>Control resources; monitor staff proficiency and qualifications; monitor the locations and activities of assets; and coordinate the flow of information to and from O&amp;M staff and USG representatives.</li><li>Resolve physical plant and building operations issues.</li><li>Provide professional engineering guidance for all future work and technical proposals and will be responsible for drafting and presenting reports and analysis of system performance and recommendations for improvement.</li><li>Interpret all architectural, civil, structural, mechanical, electrical, plumbing, and fire system diagrams or drawings for large facilities.</li><li>Continually interface with Department of State Facility Management personnel in order to coordinate the work being completed on the equipment systems within the Utilities section and brief the customer during meetings and site surveys.</li><li>Perform additional duties and projects as assigned.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><br></li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Wood is recruiting for a Rotating Mechanical Engineer to join its Iraq business unit focusing on developing and implementing preventive and predictive maintenance programs for rotating equipment.</p><br><p>This role is a full-time on-site role in Basra, Iraq with travel requirement.</p><br><p><strong>Reports to:</strong> Construction Manager</p><br><br> Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy &amp; Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com<br> <b>Diversity Statement&nbsp;</b><br> We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.<br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Operate boom truck crane to lift, move, position or place equipment and materials such as but not limited to light gauge steel trusses, walls, and floors at construction sites. ... Perform routine maintenance check on boom truck.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Daily circle check reports and upkeep of the vehicle, including general maintenance (greasing of Boom/ Moffat)</li><li>Verifying loads and paperwork (proper loading of materials, tarping, strapping etc.)</li><li>Safe and timely deliveries and pick ups of material to locations</li><li>Participate in loading and unloading materials on outgoing trucks by repetitive lifting or using a boom truck</li><li>Responsible for directives on site to helper</li><li>Provide professional and courteous service to customers and sub trades</li><li>Reporting damaged or missing materials or equipment</li><li>Adhere and follow company s Health &amp; Safety policies and regulations</li><li>Abide by all rules and laws of the road</li></ul><p></p></section>

<p>Implement quality control activities for Structural works as per Project Quality Plan, project specifications, codes and standards and contract requirements Responsible for the organization, safekeeping and attachment of all quality records for materials/products to ITP records for the final acceptance of the Structural works Witness and disposition all site inspections for Structural works Perform site quality control inspections to verify compliance Perform site surveillance inspections to monitor site activities Notify the interested parties identified in ITPs for upcoming inspections Coordinate all site inspections with the subcontractors and the Customers Engineer/Inspector for Structural works Ensure all work is correctly prepared prior to any inspection being undertaken Ensure that all inspection reports are accurate and that all attached documents are current status Assist the QC Manager, Superintendent and Supervisor in the organization, maintenance and control of the quality system Review all Structural inspection reports for compliance Liaise with the site construction engineers and provide assistance when requested Prepare nonconformity reports and assist in developing corrective actions Coordinate with the customers QC Inspectors for the resolution of site problems Coordinate with the site subcontractors to ensure that communications exist and are maintained Assist the site subcontractors in the resolution of drawing interpretation Attend QC meetings Comply with the projects HSE plan and regulations</p><p><strong>Desired Candidate Profile</strong></p><p>Education: Bachelors degree in Civil Engineering, or a relevant technical/vocational diploma.</p><p>Experience: Minimum of 3 years in a similar structural QC role, specifically on large, complex projects.</p><p>Skills: Strong knowledge of structural steel material testing, quality regulations, and intermediate English proficiency.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Overview **This position will be physically located in Iraq in support of LOGCAP** Under the supervision of the Sr. ESH Engineer, the Pest Management Supervisor is responsible to the assigned Engineer in performance of their duties. Assigns work to and oversees work being accomplished by Pest Controllers. Assures safety practices are followed. Major areas of responsibility include, but are not limited to: residential, commercial, and industrial pest management services, and the safe and efficient operation of industry particular equipment for LOGCAP V AOR. Must be knowledgeable of laws governing the application of controlled and non-controlled pesticides and herbicides. Coordinates work/inspections with facility managers/occupants. Researches materials, and prepares necessary documents. Responds to emergency service calls during regular hours or after-duty on-call hours. Responsibilities This position description is subject to change at any time as needed to meet the requirements of the program or company.</p><p>Assigns work to and oversees work being accomplished by Pest Controllers. Must be able to supervise the activities of multi-national and culturally diverse work force. Possess knowledge of safety and environmental and pesticide handling. Accustomed to dealing with IPM Must be knowledgeable of laws governing the application of controlled and non-controlled pesticides and herbicides Coordinates work/inspections with facility managers/occupants. Provides educational awareness of pest management practices through instructing/providing technician training. Manages staff to ensure safe, ethical, and robust procedures are followed in accordance with regulatory guidance.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><h2>Qualifications</h2><p>Minimum Qualifications:</p><p>Education/Certifications: One year related experience may be substituted for one year of education, if degree is required.</p><p>Must be a U.S. Citizen</p><p>Must have vast knowledge and background in Integrated Pest Management techniques and implementation.</p><p>Experience: Must have at least 5 years experience in Pest Management supervisor capacity</p><p>Hazardous Materials experience is a plus</p><p>Licenses/Certifications: Must obtain respiratory program certification within the 90-day probationary period and annually thereafter. At a minimum, must have either a commercial/non-commercial or Department of Defense certified applicator license. Primary certification must be for Industrial, Institutional, and Household Pest Control. Other certifications can come from the following (listed in the preferred order): Ornamental and Turf Pest Control, Wood-Destroying Organisms Pest Control, Aquatic Pest Control, Public Health Pest Control: GROUND, and Right-of-Way Pest Control.</p><p>Skills:</p><ul><li>Excellent English communication skills both verbal and written.</li><li>Excellent organizational and planning skills.</li><li>Excellent interpersonal skills, with the ability to interact with all levels of workers and external high-ranking officials.</li><li>Must be self-motivated to complete job requirements without constant supervision.</li><li>Demonstrate leadership qualities.</li></ul><p>Working Conditions:</p><p>Work is generally in an office environment. However, duties will involve work in the outdoors with a potential exposure to extreme climatic conditions including frequent dust storms, and high temperatures up to 130 degrees in the summer months. Potential exposure to chemical or biological agents could exist. Indoor and/or outdoor environment with very adverse and harsh conditions (i.e., hot, dry, dusty, desert environment with average temperatures of 30 degrees in the winter and 130 degrees in the summer months). Includes some industrial production environment conditions as well.</p><p>Physical Requirements:</p><p>Light work. Exerting up to 20 pounds of force occasionally, and/or up to 10 pounds of force frequently, and/or a negligible amount of force constantly to move objects. If the use of arm and/or leg controls requires exertion of forces greater than that for sedentary work and the worker sits most of the time, the job is rated for light work. Employee use of Personal Protective Equipment (PPE) in certain areas is required. Such PPE includes but is not limited to head, foot, hand, torso, respiratory, vision and hearing protective devices. Must comply with all Fire and Safety Regulations and post policies.</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Wood is recruiting for a Rotating Mechanical Engineer to join its Iraq business unit focusing on developing and implementing preventive and predictive maintenance programs for rotating equipment.</p><br><p>This role is a full-time on-site role in Basra, Iraq with travel requirement.</p><br><p><strong>Reports to:</strong> Construction Manager</p><br><br> Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy &amp; Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com<br> <b>Diversity Statement&nbsp;</b><br> We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.<br><br>Responsibilities:<br><p>Wood is recruiting for a Rotating Mechanical Engineer to join its Iraq business unit focusing on developing and implementing preventive and predictive maintenance programs for rotating equipment.</p><br><p>This role is a full-time on-site role in Basra, Iraq with travel requirement.</p><br><p><strong>Reports to:</strong> Construction Manager</p><br><p><i><strong>#Wood #Iraq #Basra #Rotating Mechanical Engineer</strong></i></p><br><p><strong><u>The role</u></strong></p><br><p>This is an exciting opportunity for an experienced&nbsp;Rotating Mechanical Engineer to join our Iraq Business Unit.</p><br><p><strong>Our Clients and Projects&nbsp;</strong></p><br><p><strong>Designing the future. Transforming the world.&nbsp;</strong></p><br><p>Wood is an integral part of operations in Iraq, and we are continuing to grow our footprint across the country. With a 90-year heritage, 10 major contracts and over 850 employees, we have the skills, expertise and asset knowledge to support clients to deliver energy security and decarbonisation ambitions.</p><br><p>Wood excels in supporting our clients to deliver complex upstream and midstream oil and gas projects in Iraq delivering maintenance, modifications and engineering solutions. We are committed to decarbonising existing assets, producing cleaner energy and developing a sustainable national workforce, ensuring the long-term growth of the region.</p><br><p><strong><u>What we can offer</u></strong></p><br><ul> <li><strong>Meaningful and interesting projects</strong> Delivered to high profile clients and complex projects in Iraq&nbsp;</li> <li><strong>Commitment to Diversity and Inclusion</strong>; we are an organisation actively committed to diversity and inclusion across our business with employee networks committed to giving all employees a voice&nbsp;</li> <li><strong>Competitive salary</strong> with regular salary reviews to ensure we are rewarding at the right level in line with the market&nbsp;</li> <li><strong>Medical Insurance:&nbsp;</strong>Ensures inpatient and outpatient medical care is available should you require treatment.&nbsp;</li> <li><strong>Commitment to continued professional development;</strong> development plans that are tailored to your individual needs and interests&nbsp;</li> <li><strong>Global connections</strong>: join experts around the world who are at the leading edge of our industry, shaping the standards of our profession&nbsp;</li> <li><strong>Long Service Award:&nbsp;</strong>Wood values the commitment and loyalty of our people. Celebrating Long Service provides an opportunity for the business to demonstrate their appreciation of the hard work, dedication and many years’ services of our employees at 5-year service milestones&nbsp;</li></ul><p><strong><u>Job Objectives:</u></strong></p><br><ul> <li><span>Develop and implement preventive and predictive maintenance programs for rotating equipment.</span></li> <li><span>Lead root cause failure analysis (RCFA) and implement corrective actions.</span></li> <li><span>Monitor equipment performance and recommend improvements to enhance reliability and efficiency.</span></li> <li><span>Support condition monitoring activities (vibration analysis, thermography, oil analysis).</span></li> <li><span>Provide technical expertise during troubleshooting, overhauls, and major repairs.</span></li> <li><span>Review maintenance procedures, work packs, and job safety analyses (JSAs).</span></li> <li><span>Ensure compliance with OEM specifications, industry standards (API, ISO), and company procedures.</span></li> <li><span>Prepare maintenance plans, schedules, and spare parts lists for rotating equipment.</span></li> <li><span>Maintain accurate records of maintenance history, failure reports, and performance data.</span></li> <li><span>Support the development of equipment criticality assessments and risk-based maintenance strategies.</span></li> <li><span>Liaise with operations, planning, procurement, and engineering teams to ensure maintenance activities are aligned with production goals.</span></li> <li><span>Participate in HAZOPs, MOCs, and technical audits.</span></li> <li><span>Support audits, inspections, and regulatory compliance efforts.</span></li> <li><span>Provide rotating equipment expertise during facility shutdowns, turnarounds, and brownfield projects.</span></li> <li><span>Ensure that all work complies with health, safety, and environmental standards at West Qurna 1.</span></li> <li><span>Support the application of WQ1-FOD Policy in relation to the Drug and Alcohol policy, Company Ethics, Award conditions, etc, whilst respecting and protecting the personal rights of subordinates.</span></li></ul><br>Qualifications:<br><p><strong>What makes you remarkable?&nbsp;</strong></p><br><p>At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world’s most critical challenges.&nbsp;&nbsp;</p><br><p><strong>Expected:</strong></p><br><ul> <li><span>Bachelor’s degree in Mechanical Engineering or a related discipline.</span></li> <li><span>Minimum of 10 years’ experience specifically in Rotating Equipment Maintenance, preferably in oil &amp; gas and petrochemical sector.</span></li> <li><span>Certifications in vibration analysis (Category I/II) or RCA Training is a plus.</span></li> <li><span>Knowledge on the International Standard related to Mechanical, such as API 610, API 617, ANSI B73.1, ISO 5199, ISO 10816, etc.</span></li></ul><p><span><strong>Skills:</strong></span></p><br><ul> <li><span>Language English and Arabic Proficiency.</span></li> <li><span>Proficiency in reading and interpreting engineering drawings and specifications.</span></li> <li><span>Strong knowledge of rotating machinery design, operation, and maintenance.</span></li> <li><span>Strong knowledge of condition monitoring tools and analysis techniques.</span></li> <li><span>Good awareness in Safety Operations, Risk Assessment, and Best Practice Engineering.</span></li> <li><span>Problem Solving</span></li> <li><span>Excellent Communication and interpersonal skills.</span></li> <li><span>Understand and follow oral and written instructions; prepare clear and concise records, reports and other written materials.</span></li> <li><span>Continuous Improvement</span></li> <li><span>Ability to interact in a multi-cultural environment</span></li> <li><span>Demonstrated experience in liaising with third party contractors, business partners and local communities</span></li></ul><p><span><strong>Systems:</strong></span></p><br><ul> <li><span>Maximo / CMMS / Aconex</span></li> <li><span>Microsoft Offices</span></li></ul> </div>

<p>The Electrical Engineer will be responsible for electrical system design, load calculations, and preparation and review of material submittals in compliance with project specifications and international standards.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Operate heavy equipment in compliance with the company's operating safety policies and procedures. Provide recommendations for maintaining and improving environmental performance. Load and unload equipment from vehicles and trailers. Ensure company equipment, material, and the work site are maintained, kept clean, and stored in a safe manner. Collect and dispose of scrap, excess materials, and refuse. Observe distribution of paving material to adjust machine settings or material flow, and indicate low spots for workers to add material. Complete required paperwork, reporting, and other documentation.</p></div></section>

<p><h4>Job description</h4> <p><strong>Division:</strong> CSSP (Ratawi Hub – Iraq)<br> <strong>Direction:</strong> PCM</p> <h4>Situation in organization</h4> <p>The Reporting Engineer position is within the Project Control Organization of the project reporting to the Planning & Reporting Manager.</p> <h4>Job dimensions</h4> <p>The Reporting Engineer is responsible for collecting, analyzing, and presenting project performance data to support decision-making and ensure transparency across all phases of the CSSP project. The role contributes to the timely and accurate delivery of internal and external reports, dashboards, and KPIs, including HSE and risk-related metrics.</p> <p>In addition, the Reporting Engineer is responsible for supporting project digitalization and information management initiatives, ensuring the effective governance, quality, accessibility, and integration of project information across all participating organizations. The position oversees the Information Management Assistant function and promotes the efficient use of digital collaboration platforms, reporting systems, document management tools, and data-sharing solutions to enhance project execution and stakeholder alignment.</p> <p>The role acts as a focal point between Project Controls, Engineering, Construction, HSE, Contractors, and Company stakeholders to ensure consistency, traceability, and reliability of project data and information throughout the project lifecycle.</p> <p>Iraq Common Seawater Supply Project (CSSP) intends to provide treated seawater to the oil fields in southern Iraq (for injection). CSSP is composed of water pipelines which are part of Basra Oil Company (BOC) scope of work, and the Water Infrastructure Project (WIP), previously named STF (Seawater Treatment Facilities). The WIP will be located on the west side of the Khor Al Zubair, upstream of the port of Umm Qasr.</p> <p>The major components of the WIP include seawater intake and outfall structures, material offloading facility, seawater clarification, filtration and deoxygenating processes, shipping pumps, a fuel gas pipeline, power generation, utilities and non-process.</p> <p>The budget of the WIP is circa $3 billion.</p> <p>The Reporting Engineer is expected to commence duties in the 3rd quarter of 2026 and will be based in Basra.</p> <h4>Activities</h4> <p><strong>1- Reporting & Analysis</strong><br> <li>Collect and validate progress data from various project disciplines (engineering, procurement, construction, HSE, etc.).</li> <li>Prepare and update weekly/monthly progress reports, dashboards, and executive summaries.</li> <li>Track and report key performance indicators (KPIs), including physical progress, productivity, and forecasted completion dates.</li> <li>Support the Planning & Reporting Manager in preparing presentations for internal and external stakeholders.</li> <li>Ensure consistency and traceability of reporting documentation across all project phases.</li></p> <p><strong>2- HSE & Risk Reporting</strong><br> <li>Monitor and report HSE performance indicators (e.g., LTIs, TRIR, safety observations) in coordination with HSE teams.</li> <li>Maintain and update HSE dashboards and integrate safety metrics into overall project reporting.</li> <li>Assist in compiling and presenting periodic risk assessments and mitigation tracking.</li></p> <p><strong>3- Systems & Tools</strong><br> <li>Use reporting tools such as Power BI, Excel, Word, PowerPoint, and project control systems to generate visualizations and reports.</li> <li>Ensure data integrity and alignment between planning, cost control, and reporting systems.</li></p> <p><strong>4- Documentation & Compliance</strong><br> <li>Ensure compliance with TotalEnergies, BOC, and project standards for reporting procedures.</li> <li>Support audits, reviews, and project evaluations by providing accurate and timely reporting documentation.</li> <li>Coordinate with internal departments (Planning, Cost Control, Contracts, HSE) to ensure reporting accuracy.</li></p> <p><strong>5- Information Management & Digitalization</strong><br> <li>Lead project information management and digitalization activities.</li> <li>Supervise the Information Management Assistant and oversee project information, data, and records management.</li> <li>Ensure information quality, consistency, accessibility, and traceability across all project stakeholders.</li> <li>Coordinate information exchange between Company and Contractors.</li> <li>Support and optimize digital tools and platforms, including SharePoint, Power BI, and document management systems.</li> <li>Develop and maintain project data repositories, dashboards, and reporting systems.</li></p> <h4>Context and environment</h4> <p>TotalEnergies is acting as contractor to BOC. After the completion of the project, the facilities will be handed over to BOC for operation.</p> <h4>Accountabilities</h4> <p>The Reporting Engineer is responsible for collecting, analyzing, and presenting project performance data while ensuring effective information management and digital collaboration across the CSSP project. The role drives reporting excellence, supports project digitalization initiatives, supervises the Information Management Assistant, and ensures that project information is accurate, accessible, integrated, and available to support timely decision-making across all stakeholders.</p> <h4>Qualifications / Experience required</h4> <li>Degree in engineering, data analytics, or related field.</li> <li>Minimum 5 years of experience in project reporting within large-scale industrial or oil & gas projects.</li> <li>Strong analytical and data visualization skills.</li> <li>Proficiency in reporting tools (Power BI, Excel, Word, PowerPoint, etc.).</li> <li>Experience in information management or project data management.</li> <li>Understanding of data governance and information quality principles.</li> <li>Good communication and organizational skills.</li> <li>Ability to work in a multicultural and high-pressure environment.</li> <li>Experience in engineering/construction commercial or contracts administration role.</li> <li>Ability to listen to and understand the signals and queries from various interlocutors.</li> <li>Languages: English is mandatory; knowledge of French and Arabic is a plus.</li></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Wood is recruiting for a Mechanical Engineer to join its Iraq business unit focusing on ensuring that all work is completed without compromise to quality and is delivered according to the project schedule.</p><br><p>This role is a full-time on-site role in Basra, Iraq with travel requirement.</p><br><br> Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy &amp; Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com<br> <b>Diversity Statement&nbsp;</b><br> We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.<br><br>Responsibilities:<br><p>Wood is recruiting for a Mechanical Engineer to join its Iraq business unit focusing on ensuring that all work is completed without compromise to quality and is delivered according to the project schedule.</p><br><p>This role is a full-time on-site role in Basra, Iraq with travel requirement.</p><br><p><i><strong>#Wood #Iraq #Basra #Mechanical Engineer</strong></i></p><br><p><strong><u>The role</u></strong></p><br><p>This is an exciting opportunity for an experienced&nbsp;Mechanical Engineer&nbsp;to join our Iraq Business Unit.</p><br><p><strong>Our Clients and Projects&nbsp;</strong></p><br><p><strong>Designing the future. Transforming the world.&nbsp;</strong></p><br><p><span>Wood has been awarded an Onshore Project to support an International Client operation by providing Brownfield Engineering &amp; Design Services. The Vision of this Contract is to enhance the production &amp; assets integrity across various locations. Team of Engineers and Designers based in Basra and Dubai supports execution of these projects. Projects under this contract focuses on Flare system revamps/re-ignition, Rehab of aging assets, BTEX emission control, Flare Gas Recovery &amp; Replacement/upgrade of obsolete equipment, piping &amp; systems.</span></p><br><p><strong><u>What we can offer</u></strong></p><br><ul> <li><strong>Meaningful and interesting projects</strong> Delivered to high profile clients and complex projects in Iraq&nbsp;</li> <li><strong>Commitment to Diversity and Inclusion</strong>; we are an organisation actively committed to diversity and inclusion across our business with employee networks committed to giving all employees a voice&nbsp;</li> <li><strong>Competitive salary</strong> with regular salary reviews to ensure we are rewarding at the right level in line with the market&nbsp;</li> <li><strong>Medical Insurance:&nbsp;</strong>Ensures inpatient and outpatient medical care is available should you require treatment.&nbsp;</li> <li><strong>Commitment to continued professional development;</strong> development plans that are tailored to your individual needs and interests&nbsp;</li> <li><strong>Global connections</strong>: join experts around the world who are at the leading edge of our industry, shaping the standards of our profession&nbsp;</li> <li><strong>Long Service Award:&nbsp;</strong>Wood values the commitment and loyalty of our people. Celebrating Long Service provides an opportunity for the business to demonstrate their appreciation of the hard work, dedication and many years’ services of our employees at 5-year service milestones&nbsp;</li></ul><p><strong><u>Job Objectives:</u></strong></p><br><ul> <li><span>To always promote safe behavior</span></li> <li><span>To ensure that all work is completed without compromise to quality and is delivered according to the project schedule.</span></li> <li><span>To liaise with the Client’s Engineering, Operations and Maintenance staff as required to ensure a consistent approach to project completion.</span></li> <li><span>To produce and verify piping engineering and design deliverables as and when required.</span></li> <li><span>To co-ordinate with other disciplines during all stages of design development, construction, pre-commissioning, and start-up</span></li> <li><span>To provide technical support to site as required</span></li> <li><span>To assist in the coordination of all activities related to Piping engineering and design.</span></li> <li><span>To identify any areas of concern with respect to progress and/or quality and recommend corrective actions as required.</span></li></ul><br>Qualifications:<br><p><strong>What makes you remarkable?&nbsp;</strong></p><br><p>At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world’s most critical challenges.&nbsp;&nbsp;</p><br><p><span><strong>Expected:</strong></span></p><br><ul> <li><span>Bachelor’s degree in an Engineering discipline</span></li> <li><span>Minimum of 5-7 years piping design engineering experience in the oil and gas industries.</span></li> <li><span>Onshore Oil and Gas related design experience.</span></li> <li><span>Familiarity with International Design Guidelines and Standards.</span></li> <li><span>A determination to continually improve safety in all aspects of plant design and operation.</span></li> <li><span>Exposure to typical software packages (Auto Cad / PDMS / Micro station / PDS) that are used in piping engineering and design.</span></li> <li><span>Extensive Brown field and green field experience in the oil and gas industry.</span></li> <li><span>Proven capability in an engineering design company.</span></li> <li><span>Experience of site-based project work involving field engineering and understanding of construction, commissioning, operations, or maintenance relativity is preferred.</span></li> <li><span>Experience of working with multi-national and multi-cultural project teams is strongly preferred. Commercially / contractually aware and able to manage design budgets.</span></li> <li><span>A determination to continually improve safety in all aspects of plant design and operation.</span></li> <li><span>Experience of participation in HAZOP &amp; HAZID studies is essential.</span></li> <li><span>Familiarity with typical software packages that are used in pipeline engineering and designing.</span></li></ul> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Responsible for operating mixer trucks to deliver construction materials and concrete mixtures to construction and industrial site</p><p>Must inspect the condition of the truck's engine before and after operations to ensure its stability and performance that would prevent operational delays and avoid potential hazards</p><p>Dispense the mixtures properly and clean spills after delivery</p></div></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Wood is recruiting for a Senior Commissioning Engineer to join its Iraq business unit focusing on supporting the Commissioning &amp; Start-Up Manager, drive contractors across all disciplines and accelerate activities in fast-track mode, with no compromise on safety or quality.</p><br><p>This role is a full-time on-site role in Basra, Iraq with travel requirement.<br><strong>Reports to: </strong>Commissioning &amp; Start-Up Manager&nbsp;<br> &nbsp;</p><br><br> Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy &amp; Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com<br> <b>Diversity Statement&nbsp;</b><br> We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.<br> </div>

<p>Job Summary We are seeking an experienced Mechanical Engineer to supervise and execute mechanical installation activities for static and rotating equipment on a large-scale construction project. The successful candidate will ensure that all mechanical works are completed safely, efficiently, and in accordance with approved drawings, project specifications, quality standards, and HSE requirements. The Mechanical Engineer will work closely with construction, QA/QC, commissioning teams, and subcontractors to ensure timely project delivery while maintaining the highest standards of safety and quality.</p><p>Key Responsibilities</p><ul><li>Supervise the installation of static equipment, including pressure vessels, heat exchangers, columns, tanks, separators, and other process equipment in accordance with approved drawings and specifications.</li><li>Oversee the installation, alignment, and grouting of rotating equipment, including pumps, compressors, blowers, and packaged units, following manufacturer recommendations and project standards.</li><li>Monitor piping installation activities, including supports, routing, fit-up, and hydrotest preparation, ensuring compliance with approved drawings.</li><li>Verify equipment foundations, anchor bolt positioning, base plate leveling, and readiness prior to equipment installation.</li><li>Ensure proper execution of cold and hot alignment, shaft alignment, and pre-commissioning mechanical checks for rotating equipment.</li><li>Review mechanical documentation, including general arrangement drawings, P&amp;IDs, isometric drawings, vendor documentation, and method statements, to ensure correct site implementation.</li><li>Coordinate with QA/QC teams for inspections, material verification, NDT activities, hydrostatic testing, and mechanical completion documentation.</li><li>Collaborate with civil, electrical, instrumentation, and other disciplines to ensure effective coordination of installation activities.</li><li>Ensure compliance with applicable international standards, project specifications, and quality requirements.</li><li>Support pre-commissioning and commissioning activities, including flushing, leak testing, mechanical run tests, and system handover.</li><li>Participate in progress meetings, monitor subcontractor performance, and provide regular progress updates to site management.</li><li>Promote and maintain a strong safety culture by ensuring compliance with HSE procedures, conducting risk assessments, and supporting safe lifting, rigging, and installation practices.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in Mechanical Engineering.</li><li>7 10 years of experience in mechanical construction and installation, including static and rotating equipment.</li><li>Strong knowledge of piping systems and general mechanical installation works.</li><li>Experience with equipment installation, alignment, rigging, and mechanical completion activities.</li><li>Ability to interpret engineering drawings, P&amp;IDs, isometrics, and vendor documentation.</li><li>Familiarity with international engineering and quality standards.</li><li>Strong coordination, communication, and problem-solving skills.</li><li>Experience working on large-scale construction projects is preferred.</li></ul>