Materials Engineer Jobs

<p><h4>Job description: construction e&i lead</h4> <p>The lead construction engineer (E&I) will drive construction readiness, optimize field execution strategies, and ensure effective coordination between engineering, procurement, construction, commissioning, and operations. This position requires a seasoned professional capable of leading multidisciplinary teams and consistently achieving project safety, cost, schedule, and quality objectives.</p> <h4>Accountability / expectations</h4> <ul> <li>Enhance construction safety performance by promoting modularization, standardized assemblies, pre-fabricated E&I modules, and off-site construction to reduce field exposure.</li> <li>Develop brownfield and greenfield construction strategies, including tie-in planning, SIMOPS coordination, shutdown integration, and live-plant execution methodologies.</li> <li>Identify and resolve E&I construction challenges such as cable routing conflicts, hazardous area compliance issues, and instrument accessibility constraints.</li> <li>Monitor field productivity using discipline-specific KPIs (cable pulling rates, termination progress, loop completion curves, energization milestones).</li> <li>Lead construction planning, ensuring detailed sequencing for electrical load transfer, instrument migration, and control system cutover activities.</li> <li>Provide constructability input into electrical single-line diagrams, cable block diagrams, instrument indexes, control system architecture, and hazardous area layouts.</li> <li>Ensure design decisions align with HSE, cost, schedule, and quality requirements, validating field feasibility and installation constraints.</li> <li>Facilitate constructability reviews focused on cable routing, instrument maintainability, equipment lifting constraints, and hazardous area compliance.</li> <li>Serve as the primary E&I construction interface from project inception through field execution.</li> <li>Collaborate with construction management to develop execution plans covering power distribution, loop testing, control system migration, and cable management.</li> <li>Manage multiple concurrent E&I work fronts, ensuring resource leveling and contractor performance oversight.</li> <li>Ensure engineering and procurement deliverables (SLDs, ILDs, P&IDs, I/O lists, datasheets, cable drums, switchgear, instrument panels) align with construction sequencing and commissioning priorities.</li> <li>Prepare detailed E&I work packages including cable schedules, termination sheets, loop diagrams, installation drawings, and material take-offs.</li> <li>Review and update work package documentation, red-line markups, as-built records, and test documentation.</li> <li>Ensure compliance with IEC/NEC standards, ATEX/IECEx requirements, grounding and bonding standards, and project-specific electrical safety rules.</li> <li>Support commissioning teams in developing energization plans, loop testing protocols, instrument calibration procedures, and control system functional testing.</li> <li>Ensure construction activities integrate seamlessly with commissioning, operations, and other discipline interfaces.</li> <li>Advocate for cold-work strategies such as pre-terminated instrument cables, plug-and-play analyzer shelters, and pre-assembled marshalling cabinets.</li> <li>Align construction execution with project scope, quality, cost, and schedule targets.</li> <li>Ensure engineering and procurement deliverables meet construction and handover requirements.</li> <li>Implement work face planning to ensure crews receive fully validated work packages.</li> <li>Support interfaces with operations, ensuring safe and efficient brownfield and greenfield execution.</li> <li>Ensure final designs incorporate construction risk assessments and economic considerations.</li> </ul> <h4>Education</h4> <p>BSc. in instrumentation, electrical engineering, or a related discipline.</p> <h4>Experience requirements</h4> <ul> <li>Minimum 10+ years experience in oil & gas E&I design, construction, and commissioning.</li> <li>Strong understanding of:</li> <ul> <li>LV/MV electrical distribution</li> <li>Instrumentation installation and calibration</li> <li>Loop testing and commissioning workflows</li> </ul> <li>Proficiency in productivity measurement and resource-based planning (Level 4 scheduling).</li> <li>Proven leadership and supervisory experience in managing E&I construction teams and contractors.</li> <li>Strong organizational skills with the ability to manage multiple work fronts and shifting priorities.</li> <li>High attention to detail with a focus on quality, accuracy, and safe execution.</li> </ul></p><p></p>

<p><h4>Petroleum engineer (reservoir)</h4> <p>Under direct supervision, this position is responsible for all phases of planning and execution on a small project or may be responsible for a segment of a larger project.</p> <p>Plans, organizes, coordinates, and controls small engineering projects in accordance with the established policies, procedures, systems, and requirements approved by the company.</p> <p>Contributes toward the day to day contact and communication with the client and focuses on providing client satisfaction.</p> <p>Possesses knowledge of the respective industry.</p> <p>Skills are typically acquired through completion of an undergraduate degree in engineering or project management and a minimum of 2 years related experience, with typical experience ranging from 3-7 years.</p></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Petroleum Engineer (Reservoir)<br><br><p>Under direct supervision, this position is responsible for all phases of planning and execution on a small project or may be responsible for a segment of a larger project. Plans, organizes, coordinates, and controls small engineering projects in accordance with the established policies, procedures, systems, and requirements approved by the company. Contributes toward the day to day contact and communication with the client and focuses on providing client satisfaction. Possesses knowledge of the respective industry. Skills are typically acquired through completion of an undergraduate degree in Engineering or Project management and a minimum of 2 years related experience, with typical experience ranging from 3-7 years.</p><br><br><br><br><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><b>Job Description:</b></p><p>Obtains copy of production schedule or shipping order and transports material or equipment to and from designated areas in the facility</p><p><b><br></b></p><p><b>Knowledge &amp; Qualification:</b></p><p><b>N/A</b></p><p>Role &amp; Responsibilities:</p><p>Loading and unloading goods from vehicles such as trucks or aircraft.</p></div></section>

<p>Launch Your Career as a Field Engineer with Weatherford Are you ready to kick-start your engineering career in a hands-on, high-impact role? At Weatherford, our Field Engineers are the essential connection between our cutting-edge technologies and the real-world challenges faced in oil and gas rigs. This is more than just a job it s an adventure. You ll be working in the field, often at remote rig sites, where you ll gain unmatched experience and responsibility from day one. Whether it s assembling equipment, analysing data, or solving problems on the fly, you ll be at the heart of operations that matter. Your Development Journey You ll be enrolled in our 4-year Field Engineer Technical Development Program, which blends classroom learning with real-world experience: Year 1: Work with guidance and take part in hands-on training at one of our global centers. Travel may be needed to gain real-world experience Year 2: Take on more responsibility at the wellsite while continuing to grow your technical skills through hands-on and classroom training Years 3 &amp; 4: Expanding your knowledge and skills, and may lead teams at the wellsite while serving as the main contact for our clients Your day-to-day could include: Prepare, deploy, and operate advanced downhole tools to meet specific wellsite objectives Utilize cutting-edge simulation software to design and optimize wellsite solutions tailored to client needs Analyse performance data and recommend improvements Manage equipment logistics and ensure seamless setup and operation at the rig site Create detailed post-job reports and share actionable insights with clients and internal teams Champion a culture of continuous improvement with a strong focus on safety, quality, and performance Deliver front-line engineering support to our customers throughout operations, resolving issues independently What We re Looking For Graduated with bachelor s degree in engineering (all fields) within the last 24 months No more than 1 year of experience English language fluent proficiency (written and spoken) Strong communication and interpersonal skills Ability to analyse complex problems, apply critical thinking, and make informed decisions A passion for hands-on work and learning in dynamic environments (onshore and offshore) What to Expect This role is physically and mentally demanding. You ll work 12-hour shifts (day or night), often in tough weather conditions. You may be away from home for extended periods, including weekends and holidays. But if you re up for the challenge, the rewards are big. You ll join one of our specialized product lines, such as: Completions Drilling Services Wireline Services Artificial Lift Well Services Managed Pressure&nbsp;</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Graduated with bachelor s degree in engineering (all fields) within the last 24 months</li><li>No more than 1 year of experience</li><li>English language fluent proficiency (written and spoken)</li><li>Strong communication and interpersonal skills</li><li>Ability to analyse complex problems, apply critical thinking, and make informed decisions</li><li>A passion for hands-on work and learning in dynamic environments (onshore and offshore)</li></ul>

<p>We are seeking a Technical Sales Engineer Power Generators to drive business growth and support customers with reliable power generation solutions. The role focuses on identifying client requirements, proposing suitable generator systems, managing the sales cycle, and providing technical support throughout project execution. The successful candidate will possess strong technical knowledge of generator systems and established relationships within the projects and construction sectors.</p><p><strong>Desired Candidate Profile</strong></p><h2>Key Requirements</h2><p>Bachelor s degree in Electrical Engineering or a related field.</p><p>Minimum 3 years of experience in the sales and marketing of power generators in Baghdad.</p><p>Strong technical knowledge of generator systems and related control systems.</p><p>Established network within the construction and project sectors.</p><h2>Other Qualifications</h2><p>Strong communication, presentation, and negotiation skills.</p><p>Strong commercial awareness and customer relationship management capabilities.</p><p>Ability to manage multiple opportunities and meet sales targets.</p><p>Strong analytical and problem-solving skills.</p>

<p>Wood is recruiting for a Mechanical Engineer to join its Iraq business unit focusing on ensuring that all work is completed without compromise to quality and is delivered according to the project schedule. This role is a full-time on-site role in Basra, Iraq with travel requirement.</p><p>This is an exciting opportunity for an experienced Mechanical Engineer to join our Iraq Business Unit. Our Clients and Projects Designing the future. Transforming the world. Wood has been awarded an Onshore Project to support an International Client operation by providing Brownfield Engineering &amp; Design Services. The Vision of this Contract is to enhance the production &amp; assets integrity across various locations. Team of Engineers and Designers based in Basra and Dubai supports execution of these projects. Projects under this contract focuses on Flare system revamps/re-ignition, Rehab of aging assets, BTEX emission control, Flare Gas Recovery &amp; Replacement/upgrade of obsolete equipment, piping &amp; systems.</p><p>Job Objectives:</p><ul><li>To always promote safe behavior</li><li>To ensure that all work is completed without compromise to quality and is delivered according to the project schedule.</li><li>To lia with the Client s Engineering, Operations and Maintenance staff as required to ensure a consistent approach to project completion.</li><li>To produce and verify piping engineering and design deliverables as and when required.</li><li>To co-ordinate with other disciplines during all stages of design development, construction, pre-commissioning, and start-up</li><li>To provide technical support to site as required</li><li>To assist in the coordination of all activities related to Piping engineering and design.</li><li>To identify any areas of concern with respect to progress and/or quality and recommend corrective actions as required.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>What makes you remarkable?</p><p>At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world s most critical challenges.</p><p>Expected:</p><ul><li>Bachelor s degree in an Engineering discipline</li><li>Minimum of 5-7 years piping design engineering experience in the oil and gas industries.</li><li>Onshore Oil and Gas related design experience.</li><li>Familiarity with International Design Guidelines and Standards.</li><li>A determination to continually improve safety in all aspects of plant design and operation.</li><li>Exposure to typical software packages (Auto Cad / PDMS / Micro station / PDS) that are used in piping engineering and design.</li><li>Extensive Brown field and green field experience in the oil and gas industry.</li><li>Proven capability in an engineering design company.</li><li>Experience of site-based project work involving field engineering and understanding of construction, commissioning, operations, or maintenance relativity is preferred.</li><li>Experience of working with multi-national and multi-cultural project teams is strongly preferred.</li><li>Commercially / contractually aware and able to manage design budgets.</li><li>A determination to continually improve safety in all aspects of plant design and operation.</li><li>Experience of participation in HAZOP &amp; HAZID studies is essential.</li><li>Familiarity with typical software packages that are used in pipeline engineering and designing.</li></ul>

<p><h4>Duties</h4> <p>Responsible for maintaining a safe workplace and ensuring that safety is the highest priority in the workplace.</p> <p>Comply with all Environmental Health & Safety and Quality Assurance requirements and goals.</p> <p>Provide information and materials to these divisions as necessary to ensure adequate and legal documentation.</p> <p>Ensure data accuracy and update of equipment inventory database.</p> <p>Ensure that related data processing activities meet the requirements.</p> <p>Process excess turn-in documentation for all controlled and non-controlled excess equipment and materials.</p> <p>Review, reconcile, adjust and process all inventory transactions.</p> <p>Process Survey Reports for all missing equipment.</p> <p>Process and coordinate Equipment Transfers.</p> <p>Perform positive verbal and written communication skills with all internal and external customers.</p> <p>Assist in a broad scope of direct and indirect support activities involving customer owned equipment as necessary to complete assigned tasks.</p> <p>Perform additional duties and projects as assigned.</p> <h4>Required</h4> <p><strong>Minimum acceptable experience level:</strong> Minimum of 3 years’ experience supporting a DOD or DOS program exposure, at least two (2) years’ of international experience.</p> <p><strong>Knowledge, skills, and abilities:</strong></p> <ul> <li>Prior proven experience in property disposal operations with Defense Reutilization Management Operations (DRMO), Hazmat experience.</li> <li>Experience operating heavy equipment to include up to a 30K forklift, extended reach forklift, material handler, grappler (excavator), front end loader and material shredders.</li> <li>Experience with cutting torches to include plasma cutters.</li> <li>Commitment to maintaining a high performance team which delivers customer service excellence.</li> <li>Knowledge of principles and processes involved in supporting contract responsibilities at an overseas facility.</li> <li>Ability to work in a fast-paced environment that requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules.</li> <li>Cross-cultural sensitivity with an international perspective.</li> <li>Excellent organizational and time management skills.</li> <li>Computer skills, specifically in Microsoft Word and Excel.</li> <li>Ability to become an active and functioning member of a team.</li> <li>Ability to be innovative and be an agent for change.</li> <li>Expert communication skills to facilitate and disseminate information.</li> </ul> <p><strong>Education:</strong> A high school diploma or GED (General Education Diploma), bachelor’s degree in related field or fifteen (15) years of related experience.</p> <h4>Passport, licenses and certifications</h4> <p>As part of pre-contingency requirements, by the time the visa process starts, candidates must possess a valid passport with a minimum of 18 months remaining to expiration date with 8 blank pages.</p> <p>Valid drivers’ license.</p> <h4>Security vetting</h4> <p>Already possess a US Government issued security clearance or be able to obtain a favorable US Government clearance prior to being hired is required for the position. Must maintain eligibility at the required certification or clearance level for the duration of the contract.</p> <h4>Language skills</h4> <p>Satisfactory English proficiency to meet job requirements and to adhere and comply with safety, health, and security measures.</p> <h4>Medical</h4> <p>Successfully complete and pass the medical and drug examinations as required by the employer and customer for deployment to Iraq. Must maintain physical and drug requirements for duration of deployment.</p> <h4>Desired</h4> <ul> <li>Previous out of home country experience and previous work experience in harsh environmental conditions are a plus.</li> <li>Department of State experience.</li> <li>Five to seven years of international experience in challenging locations, preferably working in the Middle East, with a working knowledge of customs and cultural differences.</li> <li>Experience working with Amentum-PAE.</li> </ul> <h4>Other knowledge, skills and abilities</h4> <ul> <li>Knowledge of the principles and processes involved in Quality Control Management.</li> <li>Successful management of multiple sites in geographically dispersed locations.</li> <li>Ability to collect, analyze and summarize data and to prepare clear and concise reports.</li> <li>Experience in effectively dealing with international and headquarters staff, and sensitivity to other cultures.</li> <li>Exercise sound judgment and make decisions independently.</li> <li>Excellent organizational and time management skills, with the ability to handle multiple tasks and administrative details in a fast paced and constantly changing environment.</li> <li>Expert communication skills to facilitate and disseminate information.</li> </ul></p><p></p>

<p><h4>About company</h4> <p>Belong, connect, grow, with KBR! The KBR team delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</p> <p>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Roles and responsibilities</h4> <p>The Cost Engineer will report to the Project Control Manager.</p> <p>Specific responsibilities include:</p> <li>Full understanding of the commercial aspect of the project contract and the application to the cost management</li> <li>Understand contract specific cost procedures and carry out all work in accordance with these</li> <li>Study and understand all relevant project documents relating to the cost management of allocated project(s)</li> <li>Work with all relevant projects and discipline personnel to ensure that cost control procedures are followed</li> <li>Set up project/projects within Cost System to agreed format</li> <li>Establishing project control budgets based on the client approved Project Control Estimate</li> <li>Reviewing cost commitment and expenditure information (for all cost elements), for input to the computerized cost control and reporting system on a weekly basis and ensuring that all information received is accurate and correctly input</li> <li>Producing regular cost reports and advising management of any forecast cost overruns as soon as possible to allow corrective actions to be taken in a timely manner. Highlighting areas of concern and suggesting areas of improvement</li> <li>Maintaining comprehensive accessible registers of financial approvals, variations and change orders</li> <li>Review project man-hours and the allocation of man-hours in conjunction with Planning on a regular basis</li> <li>Liaising with the Project Management, Finance, Contracts and Procurement departments with regards to establishing monthly evaluation of work done, goods received and services rendered for invoice preparation and verification</li> <li>Ensure that all cost related work is in compliance with the contract</li> <li>Maintain rates within Computerized Cost System, ensuring they are up to date and all rate uplifts are implemented. Advise Project Management of additional costs involved and assist in obtaining additional approval from client</li> <li>Check that all estimates meet contract requirements and all relevant cost information is fed back to the estimates</li> <li>When Project specific Cost Procedures are in place ensure they have been implemented in full</li> <li>Maintain a good working knowledge of relevant corporate cost software</li> <li>Ensure that adequate control of commitment is in place</li> <li>Supervise and encourage junior and assistant personnel, including checking their work</li> <li>Participate in schedule risk analysis as required</li> <li>Ensure that the Corporate and Project Specific Change Control procedures are being adhered to</li> <h4>Education, skills & experience</h4> <h4>Education</h4> <li>Bachelor’s degree in an engineering discipline</li> <h4>Experience and skill set</h4> <li>Minimum 8 years experience in oil and gas industry in cost engineering roles</li> <li>Minimum 5 years experience in oil and gas related project delivery related projects</li> <li>Minimum 5 years experience in oil and gas project delivery as an umbrella contract senior cost engineer</li> <li>Ability to work and manage in a multi-cultural environment with good understanding of cost estimation parameters to be considered in Middle East</li> <li>Skill to actively engage with different project disciplines</li> <li>Ability to work and manage in a multi-cultural environment</li></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>At our organization, we don’t just create products—we create experiences that redefine industries.<br> The diversity of our people and ideas drives the innovation behind everything we do.<br> The Sales organization fuels the development of our products and services, impacting millions of customers globally.<br> As a Product Manager for Accessories, you will play a critical role in driving business growth across designated markets, acting as a key link between vendors, partners, and customers.<br> You will be responsible for developing and executing go-to-market strategies, driving attach rates, and ensuring strong alignment with vendor priorities to deliver sustained growth across retail, enterprise, SME, and telecom channels.<br> Key Qualifications: You understand the importance of ecosystem selling and how accessories enhance the overall connected device experience.<br> You bring strong commercial acumen and the ability to drive category growth through attach and bundling strategies.<br> You are highly analytical and detail-oriented, with the ability to manage a wide SKU portfolio while maintaining focus on profitability and efficiency.<br> You are an excellent communicator who can influence cross-functional teams and align stakeholders across sales, marketing, and partners.<br> You are confident presenting insights and strategies, simplifying complexity and driving action.<br> You thrive in fast-paced environments and bring agility, ownership, and a strong execution mindset.<br> Education and Experience: • Graduate / Engineer / Postgraduate • 10–12 years of experience, with 8–10 years in sales/category management Information Classification: Public • Vendor product certification preferred • Strong understanding of technology ecosystem and accessories portfolio • Commercial acumen with a P&amp;L ownership mindset • Strong stakeholder management and negotiation skills • Data-driven decision-making capability • Ability to manage multiple SKUs and complex inventory.<br></span> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Lead a Team of Warehousemen, Clerks and Operators and mainting smooth logistic planning of the Warehouse</p><p>Completes shipments by processing and loading orders. Prepares orders by processing requests and supply orders; pulling materials; packing boxes; placing orders in delivery area. Completes deliveries by driving truck or van to and from vendors. Maintains truck or van by completing preventive maintenance requirements and arranging for repairs. Enforces inventory controls by collecting stock location orders and printing requests. Provides quality service by following organization standards. Preserves safe and clean work environment by keeping shelves, pallet area, and workstations neat. Promotes clean shipping supply area by complying with procedures, rules, and regulations. Completes reports by entering required information. Contributes to team effort by accomplishing related results as needed.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Gradute with 5- 10 yrs experience of warehouse management</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Disposal Yard Specialist will be based at Amentum Baghdad Embassy Compound [BEC] in Baghdad, Iraq, and serve the Base Life Support Services contract in support of the State Department. This position will report to the Disposal Yard Manager. The duties and responsibilities listed below are representative of the nature and level of work assigned and are not necessarily all inclusive.</p><p>DUTIES:</p><ul><li>Responsible for maintaining a safe workplace and ensuring that safety is the highest priority in the workplace.</li><li>Comply with all Environmental Health &amp; Safety and Quality Assurance requirements and goals.</li><li>Provide information and materials to these divisions as necessary to ensure adequate and legal documentation.</li><li>Ensures data accuracy and update of equipment inventory database.</li><li>Ensure that related data processing activities meet the requirements.</li><li>Process excess turn-in documentation for all controlled and non-controlled excess equipment and materials.</li><li>Review, reconcile, adjust and process all inventory transactions.</li><li>Process Survey Reports for all missing equipment.</li><li>Process and coordinate Equipment Transfers.</li><li>Perform positive verbal and written communication skills with all internal and external customers.</li><li>Assist in a broad scope of direct and indirect support activities involving customer owned equipment as necessary to complete assigned tasks.</li><li>Perform additional duties and projects as assigned.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Minimum of 3 years experience supporting a DOD or DOS program Exposure, at least two (2) years of international experience.</li><li>Prior proven experience in Property Disposal operations with Defense Reutilization Management Operations (DRMO), Hazmat experience.</li><li>Experience operating heavy equipment to include up to a 30K Forklift, Extended reach Forklift, Material Handler, Grappler (Excavator), Front End Loader and Material Shredders.</li><li>Experience with cutting torches to include Plasma cutters.</li><li>Commitment to maintaining a high performance team which delivers customer service excellence.</li><li>Knowledge of principles and processes involved in supporting contract responsibilities at an overseas facility.</li><li>Ability to work in a fast-paced environment that requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules.</li><li>Cross-cultural sensitivity with an international perspective.</li><li>Excellent organizational and time management skills.</li><li>Computer skills, specifically in Microsoft Word and Excel.</li><li>Ability to become an active and functioning member of a team.</li><li>Ability to be innovative and be an agent for change.</li><li>Expert communication skills to facilitate and disseminate information.</li><li>A high school diploma or GED (General Education Diploma), Bachelor s Degree in related field fifteen (15) yeas of related experience.</li><li>As part of pre-contingency requirements, by the time the visa process starts , candidates must possess a valid passport with a minimum of 18 months remaining to expiration date with 8 blank pages.</li><li>Valid drivers license</li><li>Already possess a US Government issued security clearance or be able to obtain a favorable US Government clearance prior to being hired is required for the position. Must maintain eligibility at the required certification or clearance level for the duration of the contract.</li><li>Satisfactory English proficiency to meet job requirements and to adhere and comply with safety, health, and security measures.</li><li>Successfully complete and pass the medical and drug examinations as required by Amentum and our customer for deployment to Iraq. Must maintain physical and drug requirements for duration of deployment.</li><li>Previous out of home country experience and previous work experience in harsh environmental conditions are a plus.</li><li>Department of State experience.</li><li>Five to seven years of international experience in challenging locations, preferably working in the Middle East, with a working knowledge of customs and cultural differences.</li><li>Experience working with Amentum-PAE.</li><li>Knowledge of the principles and processes involved in Quality Control Management.</li><li>Successful management of multiple sites in geographically dispersed locations.</li><li>Ability to collect, analyze and summarize data and to prepare clear and concise reports.</li><li>Experience in effectively dealing with international and headquarters staff, and sensitivity to other cultures.</li><li>Exercise sound judgment and make decisions independently.</li><li>Excellent organizational and time management skills, with the ability to handle multiple tasks and administrative details in a fast paced and constantly changing environment.</li><li>Expert communication skills to facilitate and disseminate information.</li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are currently seeking for passionate and dynamic guest focused Housekeeping professionals who pride themselves on their ability to deliver extraordinary levels of customer service and provide creative solutions to our guests.<br><br>As a Tailor you are responsible for daily tailoring duties as instructed by Superiors while adhering to hotel policies and procedures and your role will include key responsibilities such as:<br><br>• Measure, make or alter uniforms for new employees<br>• Take care of basic alterations requested by guests<br>• Inform the linen room supervisor for replenishing sewing supplies<br>• Repair and maintain uniforms for all hotel employees<br>• Keep a detailed record of the daily work<br>• Convert discarded linen into usable items for re-circulation<br>• Organize and take inventory of all fabric materials<br>• Keep the tailoring area clean and tidy<br>• Assume duties and tasks assigned by Superiors</p> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Wood is currently recruiting for a QC Piping Engineer to strengthen our team in Iraq. This is a full-time onsite position based in Basra, Iraq.</p> <p><strong>Diversity Statement</strong></p> <p>We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.</p> <p><strong>Qualification:</strong></p> <ul> <li>More than 10 years experience in the Up-stream or Mid-Stream of the Oil and Gas project/operations engineering business</li> <li>Bachelor s Degree in Piping Engineering or equivalent technical discipline.</li> <li>More than 5 years experience in Hazardous areas.</li> <li>Good knowledge for the Implementation of project Quality Management System according to requirement of ISO 9001:2015 at different stages of project construction activities.</li> <li>Good Knowledge with international standards such as: ASME B16.5, ASME B31.4, ISO 13623, ISO 13640, API RP Series 5 (5L), 6 etc</li> <li>Qualified in Atex certified Equipment with Non-Electrical Compex or equivalent qualification.</li> </ul> <p><strong>Skills:</strong></p> <ul> <li>Quality Audits and Inspections experience</li> <li>Understand and follow oral and written instructions; prepare clear and concise records, reports, and other written materials.</li> <li>Establish and maintain effective relationships with those encountered in the course of work.</li> <li>Read and understand P&amp;ID, technical documentation, Certification documents, manuals, drawing, specifications, and processes diagrams pertaining to oil and gas industry.</li> <li>Organize, plan and complete projects.</li> <li>Communicate effectively and professionally orally and in writing.</li> <li>Work with minimal supervision; schedule own time according to established priorities; work under less detailed instructions to complete assignments.</li> <li>Manage condition and asset failure data; assist with determining where to store it; QA/QC the data to make sure that it is correct; work with appropriate groups to request schema changes in applications used to support asset management.</li> <li>Proven supervisory experience with excellent behaviors and the ability to plan and measure.</li> <li>Hands on experience in Oil and Gas facilities</li> <li>Excellent communication skills in verbal and written briefs and skilled in report writing and compilation.</li> <li>Strong knowledge of piping maintenance and inspection techniques.</li> <li>Experience and ability to find fault piping systems</li> </ul> <p><strong>Systems:</strong></p> <ul> <li>Maximo / CMMS / Aconex</li> <li>Microsoft Suite</li> </ul> <p><strong>Key Activities:</strong></p> <ul> <li>Quality Control Experience.</li> <li>Inspection, maintenance, repair and rectification work on all Piping equipment in west qurna1</li> <li>Ensure all work meets the site needs in reference to the regulations and the subsequent ATEX compliance if applicable.</li> <li>Utilizes and understands P&amp;ID, single line drawings, termination drawings, technical documentation, Certification documents, manuals, drawing, specifications, and processes diagrams pertaining to oil and gas industry.</li> <li>Ability to complete reports and ITR on equipment inspected and tested.</li> <li>Experience with piping installation and inspection.</li> <li>Provide support for the implementation and on-going maintenance of safety critical piping systems.</li> <li>Troubleshooting to Identify problems or issues in a timely manner to take corrective action as required.</li> <li>Builds relationships with other departments and project team members.</li> <li>Supervise vender activities.</li> <li>Knowledge of the working principle of field installed piping equipment's.</li> <li>Computer skills related to Maintenance Management software Passport, Excel, Word, Outlook</li> <li>Complies with National Codes, Standards and Regulations</li> <li>Adhere to Health, Safety and Environment policy and comply with employee responsibilities listed in the Health, Safety and Environment Handbook.</li> </ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><strong>What makes you remarkable?</strong></p> <p>At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world s most critical challenges. </p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>At our organization, we don’t just create products—we create experiences that redefine industries.<br> The diversity of our people and ideas drives the innovation behind everything we do.<br> The Sales organization fuels the development of our products and services, impacting millions of customers globally.<br> As a Product Manager for Smartphones, you will play a critical role in driving business growth across designated markets, acting as a key link between vendors, partners, and customers.<br> You will be responsible for developing and executing go-to-market strategies, enabling sales teams, and ensuring strong alignment with vendor priorities to deliver sustained growth across retail, enterprise, SME, and telecom channels.<br> Key Qualifications: You understand there are many moving parts in an organization, and navigating cross-functional dependencies is critical to success.<br> You bring strong commercial acumen, understand business financials, and focus on sustaining profitable growth while staying ahead of competition.<br> You are an excellent communicator who can influence, collaborate, and align diverse stakeholders.<br> You actively listen, challenge constructively, and bring clarity to complex situations.<br> You are confident presenting to any audience, simplifying complexity and articulating the product value proposition effectively.<br> You bring deep knowledge of how hardware, software, and services integrate to deliver a seamless customer experience.<br> You thrive in dynamic environments, remain composed under pressure, and inspire teams with your energy and clarity of thought.<br> Education and Experience: • Graduate / Engineer / Postgraduate • 10–12 years of experience, with 8–10 years in sales Information Classification: Public • Vendor product certification preferred • Experience across Middle East markets • Strong understanding of technology ecosystem, particularly smartphones • Experience in managing product lifecycle, NPI, and channel programs • Commercial acumen with a P&amp;L ownership mindset • Strong stakeholder management and negotiation skills • Data-driven decision-making capability • Ability to thrive in fast-paced, multicultural environment • Willingness to travel as per business requirements.<br></span> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Tile and marble setters are responsible for installing hard tiles, wood, and marble in homes and offices. They determine the tile or marble pattern layout, cut and shape the tiles to size, and expertly install flooring fixtures using hand and machine tools.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Knowledge of Tiles and basic Chemicals</li><li>Measuring and marking: Measuring and marking surfaces to be tiled</li><li>Preparing surfaces: Preparing surfaces for tiling by cleaning and applying waterproofing material or lath</li><li>Cutting and shaping: Cutting and shaping tiles to fit around obstacles and in tight spaces</li><li>Forming tile beds: Forming tile beds using concrete, plaster, mastic, cement, glue, or mortar</li><li>Aligning and straightening: Aligning and straightening tiles to ensure patterns are even and precise</li><li>Installing and anchoring: Installing and anchoring fixtures in designated positions</li><li>Mixing and applying: Mixing, applying, and spreading adhesive to apply, seal, and finish tile</li><li>Creating designs: Creating decorative wall and floor designs by laying and setting mosaic tiles</li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span> <span></span></span><p>We are looking for the right people — people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world’s largest providers of products and services to the global energy industry.</p><br><b>Job Duties</b> <br><p>Under general supervision from the Production Manager,</p><br> <ul> <li>The Production Supervisor works in a multi-discipline Asset Operations Team to develop potentially large and challenging unconventional plays and mature oil and gas fields.</li> <li>Identifies innovative ways to apply HAL technology, service capability and expertise within the context of understanding the reservoir, production and facilities to design new, step-change field exploitation methodologies.</li> <li>Integral member of the multi-discipline Production Team comprised of a reservoir engineer, production geologist and field personnel team.</li> <li>Analyzes production history, well files, production equipment and decline curve analysis and nodal analysis of well performance to estimate remaining recoverable reserves, production and cost of upgrading equipment.</li> <li>Selects and implements production technology, service capability and expertise including completion systems comprised of tubing selection, perforating, sand control and fine migration, matrix stimulation, water control and hydraulic fracturing; artificial lift equipment comprised of sucker-rod lift, gas lift, electrical submersible pumps, subsurface hydraulic pumps, progressing-cavity pumps and plunger lift; real-time surveillance and monitoring systems and waterflooding and other enhanced recovery techniques.</li> <li>Uses decline curve analysis and nodal analysis to identify workovers or recompletions candidates and to select and upgrade production equipment.</li> <li>Focuses on maintaining and increasing daily production through optimizing well performance and field operations while controlling operating costs.</li> <li>Performs daily field operations including optimizing well behavior, production, water disposal, chemical injection and treatment, waterflood performance and artificial lift systems.</li> <li>Evaluates proposed modifications to equipment or to operating procedures to improve safety, efficiency and reliability of equipment and ensures all modifications meet statutory and Company standards.</li> <li>Develops and maintains good working relationships with Production Team through effective communication and teamwork.&nbsp;</li> </ul><br><br><b>Qualifications</b> <br><ul> <li>Requires excellent communication skills and the ability to work closely with geologists, engineers, contractors and asset teams to successfully execute projects from concept to operation; over time, incumbent will become very knowledgeable of HAL technologies and solutions experience together with the exploitation methodologies and technologies that other companies apply.</li> <li>Requires an undergraduate degree and a minimum of eight (8) years of industry experience. Degree in geology or engineering is preferred.</li> </ul><br><br><br><p><strong>Halliburton is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation</strong>.</p><br> <p><strong><u>Location</u></strong></p><br> <p>Oils Opertion ST,N°29 Burjesia,&nbsp;Basra,&nbsp;Basrah,&nbsp;61001, Iraq</p><br> <p><strong><u>Job Details</u></strong></p><br> <p><strong>Requisition Number:</strong>&nbsp;210433&nbsp;&nbsp;<br><strong>Experience Level:&nbsp;</strong>Experienced Hire&nbsp;<br><strong>Job Family:</strong>&nbsp;Operations&nbsp;<br><strong>Product Service Line:&nbsp;</strong>Halliburton Project Management&nbsp;&nbsp;&nbsp;<br><strong>Full Time / Part Time:&nbsp;</strong>Full Time</p><br> <p><strong>Additional Locations for this position:&nbsp;</strong></p><br> <p><u><strong>Compensation Information</strong></u><br>Compensation is competitive and commensurate with experience.</p><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Project Manager will be responsible for overseeing finishing tasks in construction projects, including coordinating with design teams, managing budgets, sourcing and inspecting materials, and ensuring compliance with project specifications. It requires liaising between contractors, suppliers, and owners, monitoring the implementation of key construction phases, and ensuring quality across interior and exterior works.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"><b>Education and Experience:</b></p><p>Bachelor s degree in Architecture, Construction Management, or Civil Engineering field.</p><p>Project Management Professional (PMP) or equivalent is preferable.</p><p>12+ years of professional experience in Project Management with a focus on high-end projects working on budgets, procurement, and coordinating with contractors and design teams.</p><b>Knowledge, Skills and Abilities:</b><ul><li>Proficient in using AutoCAD, SketchUp, and Project management software.</li><li>Arabic speaking is a must.</li><li>Strong project management, organizational, and budgeting skills.</li><li>Proven track record of delivering interior and exterior projects.</li><li>Strong leadership and team coordination abilities.</li><li>Excellent client-facing communication skills.</li><li>Creative and strategic mindset with ability to think innovatively and execute complete design concepts.</li><li>Proactive in identifying and resolving project issues.</li><li>Strong organizational and multitasking abilities, with a high attention to detail.</li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>At our organization, we don’t just create products—we create experiences that redefine industries.<br> The diversity of our people and ideas drives the innovation behind everything we do.<br> The Sales organization fuels the development of our products and services, impacting millions of customers globally.<br> As a Product Manager for Computing Devices, you will play a critical role in driving business growth across designated markets, acting as a key link between vendors, partners, and customers.<br> You will be responsible for developing and executing go-to-market strategies, enabling sales teams, and ensuring strong alignment with vendor priorities to deliver sustained growth across retail, enterprise, and SME channels.<br> Key Qualifications: You understand there are many moving parts in an organization.<br> Navigating cross-functional interdependencies is essential for success.<br> Understanding how business financials work, and strategies for sustaining profitable growth, are key to staying ahead of the competition.<br> You analyze the market and think beyond the short term.<br> You believe that communication is key to business success.<br> You actively engage, listen, and collaborate with customers and teammates alike.<br> To ensure the most innovative ideas become reality, you recognize diverse perspectives, patiently listen to every detail, and commit to what is right in order to move the business forward.<br> No matter the audience, you are an expert at presenting and remain composed under pressure.<br> You simplify complexity and confidently lead audiences through strategic discussions.<br> You empower others to learn, stay curious, and share your passion for the brand story.<br> When challenged with complex questions, you demonstrate deep knowledge of how hardware, software, and services integrate to deliver seamless customer experiences.<br> Information Classification: Public Education and Experience: • Graduate / Engineer / Postgraduate • 10–12 years of experience, with 8–10 years in sales • Vendor product certification preferred • Experience across Middle East markets • Strong understanding of technology ecosystem, particularly computing devices • Commercial acumen with a P&amp;L ownership mindset • Strong stakeholder management and negotiation skills • Data-driven decision-making capability • Ability to thrive in fast-paced, multicultural environments • Willingness to travel as per business requirements.<br></span> </div>

<p><h4>Job description</h4> <p>Kinetic is working with a leading construction company who are hiring a senior cost control engineer to be based in Iraq.</p> <p>Please note that you must meet all the criteria set out below for your application to be considered. Suitable candidates will be contacted within 5 working days. If you are not contacted by us within that time, please consider your application unsuccessful on this occasion.</p> <h4>Main responsibilities</h4> <ul> <li>Lead cost control activities across major EPC projects.</li> <li>Develop, monitor, and maintain project budgets, forecasts, and cost reports.</li> <li>Implement earned value management reporting and performance tracking.</li> <li>Prepare s-curves, cash flow forecasts, and variance analysis.</li> <li>Support project planning and scheduling integration with cost data (Primavera P6).</li> <li>Monitor commitments, actuals, and accruals to ensure accurate cost visibility.</li> <li>Provide regular cost performance updates and recommendations to project teams.</li> <li>Support contract administration, including variations and commercial reporting.</li> <li>Ensure compliance with project controls procedures and governance standards.</li> </ul> <h4>Requirements</h4> <ul> <li>Degree qualified in engineering or a related technical discipline.</li> <li>5+ years proven experience in project cost control within major EPC or construction environments.</li> <li>Strong capability in project controls principles, particularly earned value-based reporting and analysis.</li> <li>Advanced Excel skills with experience producing cost forecasts and s-curve reporting.</li> <li>Exposure to integrated planning tools such as Primavera P6.</li> <li>Good understanding of large EPC contract frameworks and commercial project controls processes.</li> <li>Excellent verbal and written communication skills in English and Arabic.</li> <li>Open to applicants willing to relocate.</li> </ul></p><p></p>