Packing & Packaging Technician Jobs in Iraq

<p>In this role, you ll work with department managers and supervisors to deliver the program s preventative medicine plan. Your responsibilities will span food service, water purification, potable water, and ice plant operations, combining inspections and records review with disease prevention and environmental health activities.</p><h3>Position Title: Preventative Medicine Specialist or Technician</h3><p>Assignment Location: Onsite in Balad, Iraq; relocation required.</p><p>Work Environment: Work is normally performed in a deployed work environment.</p><h3>Key Responsibilities</h3><ul><li>Provide food and water safety support and subject matter expertise for the dining facility, retail concession restaurants and stores, reverse osmosis water purification unit, potable water operations, and ice plant operations.</li><li>Evaluate sanitation practices and preventative hygiene measures for dining facility customers and workers.</li><li>Inspect storage areas and food packaging, and inspect or review food and water deliveries.</li><li>Review water test results and collaborate on activities to prevent foodborne and waterborne illnesses. The prime contractor is responsible for testing water samples.</li><li>Work with the prime contractor, as needed, on disease surveillance, vector control, waste management, environmental health concerns, and infectious disease outbreak identification and mitigation.</li><li>Support preventative medicine inspection schedules and review department records supporting program-referenced medical technical bulletin requirements and the prevention of foodborne and waterborne illnesses.</li><li>Complete required organizational and client-specified compliance education associated with Joint Commission Healthcare Staffing Services certification or other regulatory bodies.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Two years of experience in preventative medicine, including food and water safety practices.</p><p>Education or training equivalent to Preventative Specialist, Military Occupational Specialty (MOS) 68S, or an international equivalent.</p><p>Fluency in both spoken and written English.</p><h3>Assignment and Physical Requirements</h3><ul><li>Obtain medical clearance and maintain current immunizations.</li><li>Possess a valid passport from your country of record before relocation and maintain a current passport throughout your stay in Balad.</li><li>Be able to sit and stand for prolonged periods.</li><li>Work may also require bending, stooping, and lifting up to 15 pounds.</li></ul>

<p>The Mechanical & Hydraulic Technician (GSE) is responsible for carrying out preventive, corrective, and emergency maintenance on all Ground Support Equipment used in airport operations. This includes diesel engines, transmissions, hydraulic pumps, cylinders, hoses, valves, braking systems, chassis components, and all mechanical/hydraulic assemblies. The role ensures that GSE units remain safe, reliable, and operational to support continuous aircraft ground handling. Performs preventive and corrective maintenance on mechanical and hydraulic systems for all GSE, including: • Pushback tractors • Belt loaders • Baggage tractors • High-lift catering trucks • Lavatory/water service trucks • Ground Power Units (GPU – mechanical side) • Air Start Units (ASU – mechanical/hydraulic side) • Passenger stairs • All hydraulic-driven and mechanical-driven GSE Mechanical Maintenance Tasks • Engine repair and overhaul (diesel & gasoline) • Transmission repair (manual/automatic) • Cooling system service (radiators, hoses, thermostats) • Brake system service (air, hydraulic, mechanical) • Suspension & steering system repairs • Lubrication, oil/filter changes, belt replacement • Structural inspections (welding cracks, chassis damage) Hydraulic Maintenance Tasks • Hydraulic pump repair and replacement • Hydraulic cylinder rebuilding (seals, rods, pistons) • Valve block service and troubleshooting • Hose replacement, fitting installation, and leak rectification • System pressure testing and flow measurement • Hydraulic fluid flushing, bleeding, and contamination control Diagnostics & Technical Reporting • Uses mechanical and hydraulic diagnostic equipment • Identifies mechanical/hydraulic faults and root causes • Reads and interprets service manuals, diagrams, hydraulic schematics • Completes work orders, checklists, and maintenance reports accurately</p><p>A hands-on technician with 2-4 years of experience in heavy equipment, GSE, or hydraulic systems, capable of independently diagnosing and repairing mechanical and hydraulic faults, performing preventive maintenance, reading technical manuals, and ensuring GSE equipment remains safe, reliable, and operational in an airport environment. Education: Diploma in Mechanical Engineering Technology, Automotive Maintenance, or Hydraulic Systems. Experience: 2–4 years of experience in GSE, heavy vehicles, industrial machinery, or hydraulic systems, Strong understanding of engine, hydraulic, and mechanical systems, Airport GSE experience is desirable. Training Requirements: Mechanical & Hydraulic Systems Maintenance, Diesel Engine Repair Training, Hydraulic Troubleshooting. Computer Skills: MS office Language Skills (Eng., Arabic, other): Arabic and English Behavioral Competencies • Delivering Results & Fostering Ownership • Building Customer Value • Networking & Influencing Collaboratively • Leading Teams • Driving Change Technical Competencies • Diagnostic & Troubleshooting Techniques • Preventive & Corrective Maintenance • GSE Maintenance • Hydraulic and Mechanical Systems • Technical Reporting and Documentation</p>

<p>The Mechanical & Hydraulic Technician (GSE) is responsible for carrying out preventive, corrective, and emergency maintenance on all Ground Support Equipment used in airport operations. This includes diesel engines, transmissions, hydraulic pumps, cylinders, hoses, valves, braking systems, chassis components, and all mechanical/hydraulic assemblies. The role ensures that GSE units remain safe, reliable, and operational to support continuous aircraft ground handling. Performs preventive and corrective maintenance on mechanical and hydraulic systems for all GSE, including: • Pushback tractors • Belt loaders • Baggage tractors • High-lift catering trucks • Lavatory/water service trucks • Ground Power Units (GPU – mechanical side) • Air Start Units (ASU – mechanical/hydraulic side) • Passenger stairs • All hydraulic-driven and mechanical-driven GSE Mechanical Maintenance Tasks • Engine repair and overhaul (diesel & gasoline) • Transmission repair (manual/automatic) • Cooling system service (radiators, hoses, thermostats) • Brake system service (air, hydraulic, mechanical) • Suspension & steering system repairs • Lubrication, oil/filter changes, belt replacement • Structural inspections (welding cracks, chassis damage) Hydraulic Maintenance Tasks • Hydraulic pump repair and replacement • Hydraulic cylinder rebuilding (seals, rods, pistons) • Valve block service and troubleshooting • Hose replacement, fitting installation, and leak rectification • System pressure testing and flow measurement • Hydraulic fluid flushing, bleeding, and contamination control Diagnostics & Technical Reporting • Uses mechanical and hydraulic diagnostic equipment • Identifies mechanical/hydraulic faults and root causes • Reads and interprets service manuals, diagrams, hydraulic schematics • Completes work orders, checklists, and maintenance reports accurately</p><p>A hands-on technician with 2-4 years of experience in heavy equipment, GSE, or hydraulic systems, capable of independently diagnosing and repairing mechanical and hydraulic faults, performing preventive maintenance, reading technical manuals, and ensuring GSE equipment remains safe, reliable, and operational in an airport environment. Education: Diploma in Mechanical Engineering Technology, Automotive Maintenance, or Hydraulic Systems. Experience: 2–4 years of experience in GSE, heavy vehicles, industrial machinery, or hydraulic systems, Strong understanding of engine, hydraulic, and mechanical systems, Airport GSE experience is desirable. Training Requirements: Mechanical & Hydraulic Systems Maintenance, Diesel Engine Repair Training, Hydraulic Troubleshooting. Computer Skills: MS office Language Skills (Eng., Arabic, other): Arabic and English Behavioral Competencies • Delivering Results & Fostering Ownership • Building Customer Value • Networking & Influencing Collaboratively • Leading Teams • Driving Change Technical Competencies • Diagnostic & Troubleshooting Techniques • Preventive & Corrective Maintenance • GSE Maintenance • Hydraulic and Mechanical Systems • Technical Reporting and Documentation</p>

<p>The GSE Electrician Technician is responsible for performing electrical preventive, corrective, and emergency maintenance on all Ground Support Equipment across the airport. This includes 12V/24V/48V DC systems, AC electrical systems, control panels, sensors, alternators, starters, wiring harnesses, ECUs, and electrical components related to diesel/electric GSE. The role ensures the electrical systems of all GSE units are reliable, safe, and operational to support continuous airport operations. o Performs electrical maintenance and repair of all GSE electrical systems, including: o GPUs (400Hz/28V DC) electrical circuits o ASU electrical systems o Pushback tractors electrical/electronic components o Belt loaders, baggage tractors, and high-lift trucks o Lavatory/water trucks electrical systems o Battery-operated GSE o Troubleshoots electrical faults related to: o Fuses, relays, connectors o Alternators, starters, batteries o Controllers, ECUs, sensors o Switches, actuators, solenoids o Diagnoses electronic and CAN-BUS communication issues (if applicable). o Performs battery maintenance, load testing, and replacement. o Reads and interprets electrical diagrams, wiring schematics, and service manuals. o Uses multimeters, clamp meters, diagnostic scanners, and test equipment effectively. o Assists in overhauls, rebuilds, and electrical refurbishment of older GSE units. o Ensures electrical components are installed correctly and safely. o Supports installation of lighting, safety beacons, alarms, and electrical accessories on GSE. o Completes service reports, checklists, and work orders accurately. o Ensures electrical systems comply with OEM standards and airport safety rules.</p><p>A skilled Electrical Technician with 2-3 years of experience in GSE, heavy vehicles, or industrial equipment maintenance, possessing strong expertise in electrical troubleshooting, batteries, charging systems, wiring, and electronic controls. The candidate should be capable of independently diagnosing and repairing faults while ensuring equipment availability, operational reliability, and compliance with airport safety standards. Education: Diploma in Electrical Engineering Technology or Automotive Electrical Systems. Experience: Minimum 2–3 years of experience in electrical maintenance on GSE, heavy vehicles, or industrial equipment. Strong knowledge of DC/AC automotive electrical systems. Experience in fault finding, wiring, and control systems. Training Requirements: GSE Electrical Systems Training (OEM preferred) , Battery Maintenance & High-Amperage Safety, Airside Driving & Safety (recommended) Computer Skills: MS office Language Skills: Arabic and English Behavioral Competencies: • Delivering Results & Fostering Ownership • Building Customer Value • Networking & Influencing Collaboratively • Leading Teams • Driving Change Technical Competencies • Diagnostic & Troubleshooting Techniques • Preventive & Corrective Maintenance • GSE Maintenance • GSE Electrical Systems • Technical Reporting and Documentation</p>

<p>O &amp; M technician for daily job orders and team follow-up Daily task O&amp;M follow-up Network performances and KPI with outage follow-up Project implementations participations Daily reporting.</p><p>Technical knowledge (Power, Generators and cooling) maintenances and repair Preventive and correction process</p><p>Behavioral Competencies: Delivering Results &amp; Fostering Ownership. Building Customer Value.</p><p>Technical Competencies: Access Network Operations Network Monitoring Passive Network Operations Problem Solving Technical Writing and Reporting</p><p><strong>Desired Candidate Profile</strong></p><p>Mechanical /Electrical perp industry / technology institute 5-year experiences in field</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>INTECH Process Automation is seeking a Seasoned<strong> Commissioning Technician (Electrical) </strong>to join our Operations &amp; Maintenance (O&amp;M) team. The selected candidate will be responsible for <strong>electrical pre-commissioning, testing, inspection, rectification, and documentation</strong> under approved procedures and Engineer supervision. Ensure electrical systems supporting instrumentation and ICSS are safely tested and ready for energization and handover.</p><br><p><strong>Key Responsibilities:</strong></p><br><ul><li>Perform assigned <strong>electrical pre-commissioning and commissioning tests</strong> under Engineer supervision.</li><li>Conduct <strong>continuity, insulation resistance (IR), earth/grounding, polarity, and functional tests</strong>.</li><li>Inspect and verify <strong>cables, terminations, glands, panels, connections, and labeling</strong>.</li><li>Perform checks on <strong>UPS, battery systems, control power supplies, and distribution panels</strong>.</li><li>Support testing of electrical power supplies serving <strong>Instrumentation, ICSS, DCS, SIS, PLC, and F&amp;G systems</strong>.</li><li>Identify and rectify approved <strong>electrical defects and punch-list items</strong>.</li><li>Support <strong>LOTO, isolation, de-energization, energization, and safe reinstatement</strong> activities.</li><li>Maintain <strong>test equipment, meters, tools, cables, and commissioning consumables</strong>.</li><li>Complete <strong>test sheets, checklists, punch records, inspection records, and commissioning documentation</strong>.</li><li>Report failed tests, defects, abnormal conditions, and unresolved issues to the <strong>Commissioning Engineer</strong>.</li><li>Coordinate with <strong>Electrical, Instrumentation, ICSS, Operations, Construction, HSE, and vendors</strong>.</li><li>Comply with <strong>PTW, LOTO, electrical safety, HSE, quality, and Company requirements</strong>.</li></ul> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>INTECH Process Automation is seeking a Seasoned<strong> Commissioning Technician (Instrument) </strong>to join our Operations &amp; Maintenance (O&amp;M) team. The selected candidate will be Responsible for <strong>instrument pre-commissioning, commissioning, calibration, loop checking, functional testing, and punch-list rectification</strong> in accordance with approved procedures. Ensure accurate test results, proper defect reporting, and safe system readiness for handover.</p><br><p><strong>Key Responsibilities:</strong></p><br><ul><li>Perform <strong>instrument pre-commissioning and commissioning</strong> activities in accordance with approved procedures.</li><li>Conduct <strong>calibration, continuity checks, loop checks, and signal verification</strong>.</li><li>Configure and test <strong>field instruments, smart devices, and instrument interfaces</strong>.</li><li>Perform <strong>functional, Cause &amp; Effect, alarm, interlock, and shutdown tests</strong> under Engineer supervision.</li><li>Verify instrument signals and functionality through <strong>DCS, SIS/ESD, F&amp;G, PLC, and ICSS interfaces</strong>.</li><li>Identify, troubleshoot, and rectify <strong>commissioning defects and punch-list items</strong>.</li><li>Support <strong>energization, isolation, reinstatement, startup, and controlled return to service</strong>.</li><li>Maintain and verify <strong>test equipment, calibration standards, tools, and commissioning consumables</strong>.</li><li>Complete <strong>test sheets, calibration records, checklists, punch lists, and commissioning documentation</strong>.</li><li>Report abnormal conditions, failed tests, defects, and unresolved issues to the <strong>Commissioning Engineer</strong>.</li><li>Coordinate with <strong>Operations, Instrumentation, ICSS, Electrical, Mechanical, Construction, HSE, and vendors</strong>.</li><li>Comply with <strong>PTW, LOTO, HSE, process safety, quality, and commissioning requirements</strong>.</li></ul> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>INTECH Process Automation is seeking a seasoned <strong>Tank Calibration Technician</strong> to join our Operations &amp; Maintenance (O&amp;M) team. The selected candidate will be responsible for performing and supporting <strong>tank gauging, calibration, measurement verification, and documentation</strong> activities in accordance with approved procedures and reference standards. Ensures accurate, traceable measurements and safe execution of calibration work in tank areas.</p><br><p><strong>Key Responsibilities:</strong></p><br><ul><li>Perform or assist with <strong>tank gauging and calibration/verification</strong> activities using approved procedures.</li><li>Inspect and verify <strong>tank level, gauging, measurement, and associated instrumentation</strong>.</li><li>Use approved <strong>reference standards, calibration equipment, and measurement tools</strong>.</li><li>Perform required <strong>measurements, calculations, comparisons, and verification</strong> of tank readings.</li><li>Ensure calibration equipment and reference standards have valid <strong>calibration status and traceability</strong>.</li><li>Record <strong>as-found/as-left readings, measurements, calculations, deviations, and calibration results</strong>.</li><li>Identify and report <strong>measurement errors, abnormal readings, instrument defects, and discrepancies</strong>.</li><li>Support troubleshooting, adjustment, replacement, and verification of <strong>tank gauging instruments</strong>.</li><li>Maintain accurate <strong>calibration certificates, test sheets, inspection records, and CMMS documentation</strong>.</li><li>Coordinate with <strong>Instrumentation, Operations, Maintenance, QA/QC, ICSS, and approved calibration/service providers</strong>.</li><li>Maintain calibration equipment, tools, standards, and work areas in <strong>safe and serviceable condition</strong>.</li><li>Follow <strong>tank-entry restrictions, gas testing, PTW, LOTO, hazardous-area, HSE, and process safety requirements</strong>.</li><li>Ensure all measurements and records remain <strong>complete, accurate, traceable, and auditable</strong>.</li></ul> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>INTECH Process Automation is seeking a Seasoned<strong> Piping/Tubing Technician </strong>to join our Operations &amp; Maintenance (O&amp;M) team. The selected candidate will be responsible for <strong>fabrication, installation, maintenance, testing, and repair of instrument tubing and small-bore piping systems</strong>. Ensure tubing and piping assemblies are correctly installed, leak-free, properly supported, clean, identified, and protected.</p><br><p><strong>Key Responsibilities:</strong></p><br><ul><li>Fabricate and install <strong>instrument tubing and small-bore piping assemblies</strong> in accordance with approved drawings and procedures.</li><li>Perform accurate <strong>tube cutting, bending, routing, and preparation</strong>.</li><li>Install and tighten <strong>compression fittings, manifolds, valves, regulators, and tubing connections</strong>.</li><li>Install and maintain proper <strong>supports, clamps, brackets, and tubing protection</strong>.</li><li>Perform <strong>leak, pressure, and functional tests</strong> as required.</li><li>Inspect tubing and piping for <strong>correct routing, slope, supports, fittings, cleanliness, and workmanship</strong>.</li><li>Troubleshoot and repair <strong>leaks, damaged tubing, fittings, and small-bore piping defects</strong>.</li><li>Support installation and maintenance of <strong>impulse lines, pneumatic tubing, hydraulic tubing, and instrument connections</strong>.</li><li>Ensure tubing systems are properly <strong>identified, tagged, protected, and weatherproofed</strong>.</li><li>Maintain cleanliness and prevent <strong>contamination, moisture ingress, and blockage</strong> during fabrication and installation.</li><li>Restore and verify <strong>supports, clamps, insulation interfaces, and protective arrangements</strong> after maintenance.</li><li>Coordinate with <strong>Instrumentation, Piping, Mechanical, Operations, ICSS, Construction, and HSE</strong> teams.</li><li>Maintain <strong>test records, inspection results, material records, and work completion documentation</strong>.</li><li>Comply with <strong>PTW, LOTO, HSE, pressure safety, quality, and Company requirements</strong>.</li></ul> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>INTECH Process Automation is seeking a seasoned <strong>HVAC Technician</strong> to join our Operations &amp; Maintenance (O&amp;M) team. The selected candidate will be responsible for the <strong>maintenance, troubleshooting, inspection, and repair of HVAC and package cooling systems</strong> supporting analyzers, control rooms, ICSS, electrical/instrument rooms, and other critical facilities. Ensures reliable environmental conditions and safe operation of HVAC equipment.</p><br><p><strong>Key Responsibilities:</strong></p><br><ul><li>Perform <strong>preventive and corrective maintenance</strong> on HVAC units, package cooling systems, split/ducted systems, and associated equipment.</li><li>Inspect and maintain <strong>compressors, condensers, evaporators, fans, filters, coils, belts, dampers, drains, and refrigerant circuits</strong>.</li><li>Monitor and record <strong>temperature, humidity, pressure, refrigerant condition, and operating parameters</strong>.</li><li>Troubleshoot and repair <strong>HVAC mechanical, electrical, control, and instrumentation faults</strong>.</li><li>Maintain environmental conditions for <strong>analyzer shelters, control rooms, ICSS rooms, equipment rooms, and other critical areas</strong>.</li><li>Check and maintain <strong>thermostats, sensors, controllers, contactors, relays, motors, and control panels</strong>.</li><li>Perform <strong>filter cleaning/replacement, coil cleaning, refrigerant checks, leak detection, and system servicing</strong>.</li><li>Support <strong>refrigerant recovery, charging, and handling</strong> in accordance with approved procedures and safety requirements.</li><li>Identify abnormal conditions, recurring failures, and equipment deterioration; perform <strong>basic troubleshooting and root-cause assessment</strong> and escalate major defects.</li><li>Verify HVAC performance after maintenance and ensure <strong>environmental conditions are restored before return to service</strong>.</li><li>Maintain accurate <strong>maintenance records, operating logs, checklists, work orders, and CMMS documentation</strong>.</li><li>Coordinate with <strong>Instrumentation, Electrical, ICSS, Analyzer, Operations, and Maintenance teams</strong> for equipment interfaces and shutdown activities.</li><li>Maintain HVAC tools, test equipment, spare parts, and consumables in <strong>safe and serviceable condition</strong>.</li><li>Follow <strong>PTW, LOTO, refrigerant safety, electrical safety, HSE, and procedures</strong>.</li></ul> </div>

<p> Provide network maintenance services<strong>.</strong> </p> <p> Carry out maintenance (Replace Antenna, RRU, Jumper, Optical, SFP).</p> <p> Carry out preventive &amp; corrective maintenance (Visit BSC, Node, site to clear fans and cables systemize)</p> <p> Health check &amp; Clear Alarms (critical, Major, Minor).</p> <p> Make site acceptance tests to be done before going on-air.</p> <p> Install/dismantle the HW of MW &amp; RAN network component including sub-racks, antennas, radios &amp; all related cables not limited to IF, RF &amp; wave guide cables.</p> <p> Install, test &amp; Maintain twisted pair cable, Fiber optic, coax data &amp; lan cabling systems using the related test.</p> <p> Support network design activities in the filed such as line of Sight LOS, alignment, Rack/Subrack Expansion, Tower space, equipment inventories &amp; generating a professional reporting for the survey result.</p> <p> Perform troubleshooting to network failures &amp; identify bottlenecks to ensure long term efficiency of network.</p> <p> Perform emergency &amp; routine field servicing of the transportation network including MW, Fiber Optic &amp; Datacom devices &amp; RAN cabinet.</p> <p> Assist &amp; coordinate with related department technician to joint deployment, troubleshooting, and repair of network E2E segments.</p> <p> Create &amp; implement daily work schedule &amp; performs other related jobs duties as assigned.</p> <p> Carry out materials inventory maintenance support including stock counts, logistics support from WH/office to sites &amp; sites to WH/office. Materials include equipment, accessories, consumables &amp; tools.</p> <p> Secondary or High school.</p> <p> 2 years work experience.</p> <p> </p> <p> <strong>Behavioral Competencies:</strong> </p> <p> <br> </p> <p> Delivering Results &amp; Fostering Ownership.</p> <p> Building Customer Value<strong>. </strong> </p> <p> <br> </p> <p> <strong>Technical Competencies:</strong> </p> <p> <br> </p> <p> Access Network Operations.</p> <p> Problem Solving.</p> <p> Service Operations Center (SOC).</p> <p> Technical Writing and Reporting.</p> <p> Troubleshooting &amp; Technical Problem Solving.</p>

<p>The Mechanical Technician is responsible for maintaining, troubleshooting, repairing, and servicing mechanical equipment, machinery, and production systems within the farm. The position ensures that all machinery operates safely, efficiently, and reliably while minimizing equipment downtime and supporting continuous production.</p><p>Key Responsibilities</p><ul><li>Perform preventive and corrective maintenance on factory machinery and mechanical equipment.</li><li>Inspect machines regularly to identify mechanical problems, wear, leaks, or potential failures.</li><li>Diagnose mechanical faults and determine the appropriate repair or replacement requirements.</li><li>Repair, dismantle, assemble, and replace mechanical components such as bearings, belts, chains, gears, shafts, pumps, valves, and couplings.</li><li>Carry out routine lubrication, alignment, adjustment, and calibration of mechanical equipment.</li><li>Respond promptly to machinery breakdowns and production maintenance requests.</li><li>Assist in the installation, commissioning, and relocation of machinery and production equipment.</li><li>Conduct routine inspections and maintenance according to established schedules.</li><li>Read and interpret mechanical drawings, equipment manuals, technical specifications, and maintenance instructions.</li><li>Use hand tools, power tools, measuring instruments, and workshop equipment safely and effectively.</li><li>Work closely with production operators to identify equipment issues and minimize production interruptions.</li><li>Maintain accurate records of maintenance activities, repairs, spare parts, and equipment failures.</li><li>Identify recurring mechanical problems and recommend improvements to increase equipment reliability.</li><li>Ensure that all maintenance work is performed in accordance with factory safety procedures and applicable standards.</li><li>Maintain a clean, organized, and safe maintenance workshop and work area.</li><li>Assist with maintaining adequate stocks of mechanical spare parts and maintenance materials.</li><li>Follow lockout/tagout and other applicable safety procedures before working on machinery.</li><li>Support the Maintenance Supervisor and Engineering team with maintenance projects and equipment improvements.</li><li>Perform other duties related to mechanical maintenance as assigned by management.</li></ul>

<p>The Instrumentation &amp; Controls Technician disassembles, inspects, cleans, repairs, calibrates, tests, and performs periodic maintenance of field instruments, equipment systems and controls. Evaluates and determines necessary modification, performs complex repairs or removal of instruments or devices needing overhaul during scheduled maintenance, troubleshooting while performing unscheduled work.</p><p><strong>Essential Duties &amp; Responsibilities:</strong></p><ul><li>Record and report abnormal function or out of tolerance conditions of equipment and initiate corrective action and documentation</li><li>Provide documents daily record of inspection, maintenance activity, repair and other work performed within approved guidelines and procedures.</li><li>Reinstall, test, evaluate, calibrate, and maintain instruments or devices upon completion of repairs.</li><li>Communicate with customer staff in the calibration, repair and operation of equipment as necessary.</li><li>Perform work in accordance with approved equipment, calibration, maintenance and safety procedures.</li><li>Ability and willingness to work holidays, weekends and overtime as required by field assignments</li><li>Travel extensively (internationally and domestically)</li><li>May be assigned other duties to help proactively drive our FieldCore vision and align with our organization s core values.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Two-year degree, scientific field of study preferred or equivalent related work experience</p><p>Must have appropriate license or certification where required by federal, state or local laws</p><p>English proficiency required</p><p><strong>Desired Characteristics:</strong></p><ul><li>Introductory level.</li><li>Possess good attitude, skills, and ambition</li><li>Basic skills training to ensure knowledge of fundamental concepts, practices and procedures of a particular field of specialization.</li><li>Experience in instrumentation, controls, installing, calibrating, maintaining and repairing equipment or equivalent experience.</li><li>Demonstrated use and understanding of physical standards of mass, temperature flow and pressure.</li><li>Working knowledge of computers.</li><li>Ability to read and work from blueprints, schematic diagrams and specification manuals.</li><li>Team player committed to working in a quality environment</li><li>Working knowledge of computers/PLC's</li><li>Excellent customer, communication, and interpersonal skills</li><li>Ability to work independently</li><li>Ability to complete multiple projects within time constraints</li><li>Strong organizational skills</li></ul>

<p>As a CT/X-ray Radiographer (Radiologic Technician), also known as a Radiologic Technologist, you'll perform diagnostic X-ray and computed tomography examinations within an international healthcare environment in Baghdad, Iraq. You'll prepare and position patients, operate imaging equipment, maintain accurate clinical records, and apply radiation protection and infection-control practices throughout each examination.</p><p>Assignment Location: This position is based onsite in Baghdad, Iraq.</p><h3>Key Responsibilities</h3><ul><li>Perform ordered diagnostic X-ray and CT examinations.</li><li>Prepare and position patients, adjust immobilization devices, and configure imaging equipment and exposure controls.</li><li>Explain imaging procedures, answer patient questions, and document services in patient and departmental records.</li><li>Apply radiation protection techniques, including beam restriction, patient shielding, and appropriate exposure-factor selection.</li><li>Follow infection-control, workplace safety, contrast-reaction, first-aid, and emergency response protocols.</li><li>Participate in required mass-casualty exercises and organizational compliance education.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Requirements Completion of an approved radiologic technology program leading to a diploma, certificate, or associate degree; qualifying U.S. military radiology technical-school training; or applicable country-of-record equivalent. At least three years of recent experience as a Radiologic Technologist, including at least six months within the past year. Current unrestricted professional license and ARRT certification, or applicable country-of-record equivalent. Current ARRT CT certification/registration, or applicable country-of-record equivalent. Current BLS certification or approved equivalent. Proficiency with electronic medical records and Microsoft Office applications. Ability to read, write, and speak English effectively. Valid passport from your country of record with at least 18 months remaining before expiration; ability to maintain a current passport while in Iraq; ability to obtain and maintain the required security clearance; and ability to relocate to Iraq for the duration of the project. Ability to meet pre-assignment physical requirements and perform work involving prolonged sitting and standing, bending, stooping, and lifting up to 25 pounds.</p><p>Preferred Prior experience supporting military, government, or international healthcare environments. Current applicable security clearance.</p>

<p>As a CT/X-ray Radiographer (Radiologic Technician), also known as a Radiologic Technologist, you'll perform diagnostic X-ray and computed tomography examinations within an international healthcare environment in Baghdad, Iraq. You'll prepare and position patients, operate imaging equipment, maintain accurate clinical records, and apply radiation protection and infection-control practices throughout each examination.</p><p>Assignment Location: This position is based onsite in Baghdad, Iraq.</p><p>Key Responsibilities</p><ul><li>Perform ordered diagnostic X-ray and CT examinations.</li><li>Prepare and position patients, adjust immobilization devices, and configure imaging equipment and exposure controls.</li><li>Explain imaging procedures, answer patient questions, and document services in patient and departmental records.</li><li>Apply radiation protection techniques, including beam restriction, patient shielding, and appropriate exposure-factor selection.</li><li>Follow infection-control, workplace safety, contrast-reaction, first-aid, and emergency response protocols.</li><li>Participate in required mass-casualty exercises and organizational compliance education.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Completion of an approved radiologic technology program leading to a diploma, certificate, or associate degree; qualifying U.S. military radiology technical-school training; or applicable country-of-record equivalent.</li><li>At least three years of recent experience as a Radiologic Technologist, including at least six months within the past year.</li><li>Current unrestricted professional license and ARRT certification, or applicable country-of-record equivalent.</li><li>Current ARRT CT certification/registration, or applicable country-of-record equivalent.</li><li>Current BLS certification or approved equivalent.</li><li>Proficiency with electronic medical records and Microsoft Office applications.</li><li>Ability to read, write, and speak English effectively.</li><li>Valid passport from your country of record with at least 18 months remaining before expiration; ability to maintain a current passport while in Iraq; ability to obtain and maintain the required security clearance; and ability to relocate to Iraq for the duration of the project.</li><li>Ability to meet pre-assignment physical requirements and perform work involving prolonged sitting and standing, bending, stooping, and lifting up to 25 pounds.</li></ul><p>Preferred</p><ul><li>Prior experience supporting military, government, or international healthcare environments.</li><li>Current applicable security clearance.</li></ul>

<p>The Instrumentation &amp; Controls Technician, having completed level two competencies, disassembles, inspects, cleans, repairs, calibrates, tests, and performs periodic maintenance of field instruments, equipment systems and controls. Evaluates and determines necessary modification, performs complex repairs or removal of instruments or devices needing overhaul during scheduled maintenance, troubleshooting while performing unscheduled work.</p><p><strong>Essential Duties &amp; Responsibilities:</strong></p><ul><li>Record and report abnormal function or out of tolerance conditions of equipment and initiate corrective action and documentation</li><li>Provide documents daily record of inspection, maintenance activity, repair and other work performed within approved guidelines and procedures.</li><li>Reinstall, test, evaluate, calibrate, and maintain instruments or devices upon completion of repairs.</li><li>Communicate with customer staff in the calibration, repair and operation of equipment as necessary.</li><li>Perform work in accordance with approved equipment, calibration, maintenance and safety procedures.</li><li>Ability and willingness to work holidays, weekends and overtime as required by field assignments</li><li>Travel extensively (internationally and domestically)</li><li>May be assigned other duties to help proactively drive our FieldCore vision and align with our organization s core values.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Two-year degree, scientific field of study preferred or equivalent related work experience. Basic English language skills are required. 1-3 years of experience in instrumentation, controls, installing, calibrating, maintaining and repairing equipment or equivalent experience. Must have appropriate license or certification where required by federal, state or local laws English proficiency required</p><p><strong>Desired Characteristics:</strong></p><ul><li>Qualified level. Able to successfully perform all requirements of the job properly.</li><li>Possess advanced skills and applies the fundamental concepts, practices and procedures of a particular field of specialization.</li><li>Demonstrated use and understanding of physical standards of mass, temperature flow and pressure.</li><li>Working knowledge of computers.</li><li>Ability to read and work from blueprints, schematic diagrams and specification manuals.</li><li>Team player committed to working in a quality environment</li><li>Working knowledge of computers/PLC's</li><li>Excellent customer, communication, and interpersonal skills</li><li>Ability to work independently</li><li>Ability to complete multiple projects within time constraints</li><li>Strong organizational skills</li></ul>

<p><h4>Essential Responsibilities</h4> <p>The air crew life support technician will perform inspections, maintenance and troubleshooting tasks on T-6A aircraft.</p> <p>Responsibilities include but are not limited to:</p> <ul> <li>Perform launch, recovery, scheduled and unscheduled inspections/maintenance.</li> <li>Preflight, thru flight, BPO inspections, ground handling, minor maintenance, and servicing.</li> <li>Perform routine troubleshooting, installation, repair and maintenance of all electro-mechanical systems and components on the aircraft at the organizational level of maintenance.</li> <li>Service aircraft. Perform end-of-runway, post-flight, preflight, thru-flight, and phase inspections.</li> <li>Troubleshoot and maintain aircraft structures, systems, components, and related equipment. Remove and install aircraft components.</li> <li>Perform inspections, scheduled and unscheduled maintenance on the company aircraft in accordance with FAA regulations, manufacturer and company maintenance manuals and procedures.</li> <li>Service, operate, and maintain ground support equipment and perform interior and exterior cleaning of aircraft and work areas.</li> <li>Precisely complete all maintenance documentation.</li> <li>Perform all other position related duties as assigned or requested.</li> </ul> <h4>Minimum Position Knowledge, Skills, and Abilities Required</h4> <ul> <li>Must have a current FAA Airframe and Powerplant (A&P) license in good standing.</li> <li>At least four (4) years of directly related heavy aircraft maintenance experience is highly desired. Experience must include complying with all applicable aircraft servicing procedures, aircraft maintenance manuals and parts catalogs.</li> <li>Experience with OBOGS systems and T-6 life support required.</li> <li>2.5 years Textron T6 Texan II aircraft maintenance experience within the last 5 years required.</li> <li>Must read, interpret and use manufacturers and aircraft maintenance manuals, service bulletins, blueprints, wiring/schematic diagrams, data tables and other specifications to determine feasibility and method to repair or replace malfunctioning or damaged components.</li> <li>Must be able to inspect, repair, and operate ground support and auxiliary equipment.</li> <li>Possess a current state issued driver’s license.</li> <li>Must be able to obtain and maintain U.S. passport for facility credentials/authorization. Note: U.S. citizenship is required for facility credentials/authorization at this work site.</li> </ul> <h4>Work Environment, Physical Demands, and Mental Demands</h4> <ul> <li>Must possess the ability to carry and lift overhead up to 50 pounds.</li> <li>Duties include walking, climbing, standing, stooping, stretching, and squatting for purposes of moving equipment, boarding and de-boarding the aircraft, performing maintenance using ladders, and performing maintenance atop and below aircraft.</li> <li>Must be able to work at high altitudes when performing flight attendant duties.</li> <li>Work is primarily performed outside in a high-level noise environment.</li> <li>Performing maintenance in low-light areas, operating support equipment after daylight hours.</li> <li>Work is occasionally performed in inclement weather.</li> </ul></p><p></p>

<p>The primary responsibility of the Mechanic Steam and Gas - is to safely accomplish the installation, maintenance and repair of the heavy rotating machinery used mainly in power generation applications. Turbine Mechanics work closely with Supervisors, EHS personnel, and the Operations Department to achieve these goals. You may be assigned other duties to help proactively drive our FieldCore vision and align with our organization s core values.</p><p>Essential Duties &amp; Responsibilities:</p><ul><li>Read blueprints, schematic drawings and technical documentation to determine proper work procedures.</li><li>Install machinery and equipment according to layout plans, blueprints and other drawings in industrial establishments.</li><li>Dismantle and assemble machinery and equipment using a variety of hand, power, pneumatic and hydraulic tools.</li><li>Perform mechanical and electrical maintenance and repairs on power tools, hand tools and training equipment.</li><li>Move machinery and equipment using hoists, cranes, chain falls and trucks.</li><li>Align machinery and equipment using hoists, squares, rules, micrometers, plumb bobs, dial indicators and/or laser alignment equipment.</li><li>Perform machining and welding operations for making various parts for lab and shop training equipment</li><li>Perform material and machine inspections using precision measuring equipment such as micrometers, rules, calipers, protractors, and torque wrenches.</li><li>Responsible for shipping and receiving all major pieces for T&amp;DC, plus all shipping, receiving, inventory, and control of tools, equipment and supplies</li><li>Determine equipment specifications and prepare parts lists for purchasing, consisting of mechanical, electrical, and hydraulic devices as needed to complete assigned projects.</li><li>Load, transport, and unload materials, tools, equipment and supplies.</li><li>Availability to travel and be away from home for extended periods of time</li><li>Ability and willingness to work holidays, weekends and overtime as required by field assignments</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Degree or associate degree in Technical Field, Gas Turbine Systems Technician preferred</li><li>Must have a minimum of two (2) years experience maintaining, dismantling, and installing machinery and industrial service equipment including various pumps, motors, fans, generators, and turbines.</li><li>Must have experience performing equipment alignments using either laser or traditional methods.</li><li>Must have Driver s License</li><li>Must possess minimum required hand tools.</li></ul><p>Desired Characteristics:</p><ul><li>Qualified level. Able to successfully perform all requirements of the job properly.</li><li>Possess advanced skills and applies the fundamental concepts, practices and procedures of a particular field of specialization.</li><li>Has solid skills acquired with trainings and required to disassemble and reassemble complex rotating equipment</li><li>Bolting, Hydraulic Bolting, Flange Management, Small Bore Piping, Basic Rigging/Lifting, O/H Crane Operator</li><li>Good mechanical/technical skills.</li><li>Good oral communication skills and critical thinking ability.</li><li>May be required to handle time-sensitive tasks and maintain a schedule within operationally challenging environments.</li><li>Must work well both independently and in a team environment.</li></ul>

<p><h4>Job description</h4> <p>The computer systems analyst I provides several phases of the required systems analysis where the nature of the system is predetermined, uses established fact-finding approaches, knowledge of pertinent work processes and procedures, and familiarity with related computer programming practices, system software, and computer equipment.</p> <p>This analyst provides several phases of the required systems analysis where the nature of the system is predetermined, uses established fact-finding approaches, knowledge of pertinent work processes and procedures, and familiarity with related computer programming practices, system software, and computer equipment.</p> <p>Carries out fact finding and analyses as assigned, usually of a single activity or a routine problem, and applies established procedures where the nature of the system, feasibility, computer equipment, and programming language have already been decided.</p> <p>May assist a higher-level systems analyst by preparing the detailed specifications required by computer programmers from information developed by the higher-level analyst.</p> <p>May research routine user problems and solve them by modifying the existing system when the solutions follow clear precedents.</p> <p>Prepare cost and deadline estimates as required for review.</p> <p>Works independently to adapt guides to specific situations; resolve problems and deviations according to established practices; and obtain advice where precedents are unclear or not available.</p> <p>Carries out objectives, priorities, and deadlines as defined by the supervisor.</p> <p>May supervise technician and others who assist in specific assignments.</p> <p>Will have some variation within and across contracts and may list additional or specific job duties related to assigned function/level which are not aforementioned.</p> <h4>Minimum requirements</h4> <p>High school diploma or equivalent is required. Certification of education level is required.</p> <p>CompTIA Security+ certification.</p> <p>Must possess two (2) years of related experience in computer systems analysis.</p> <p>Ability to obtain and maintain a US government SECRET clearance is required (prefer active Secret clearance). US citizenship is required for SECRET clearance at this work location.</p> <p>A valid U.S. passport is required to travel internationally. Passport must have a minimum of 6 blank pages and 2 plus year validity on expiration date of passport.</p> <p>Must be able to pass CENTCOM medical requirements for deployment.</p> <p>Must be able to obtain a visa in CENTCOM locations.</p> <h4>Knowledge & skills</h4> <ul> <li>Requires competence in most phases of system analysis.</li> <li>Systems analysis and design skills in an area such as a record keeping or scientific operation.</li> <li>Knowledge of pertinent system software and computer equipment.</li> <li>Knowledge of work processes, applicable regulations, and practices of the assigned subject-matter area.</li> <li>Ability to recognize probable interactions of related computer systems and predict impact of a change in assigned system.</li> <li>Good problem-solving skills.</li> <li>Self-motivated and the ability to work independently.</li> </ul> <h4>Physical requirements/working environment</h4> <ul> <li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li> <li>Must be able to lift/push/pull minimum of 50 pounds.</li> <li>May work in maintenance shop or outside.</li> <li>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</li> <li>May be exposed to extreme noise from operating equipment.</li> <li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li> <li>May be expected to work in austere environments and all weather conditions.</li> </ul></p><p></p>

<p><h4>Job description</h4> <p>The computer systems analyst I provides several phases of the required systems analysis where the nature of the system is predetermined, uses established fact-finding approaches, knowledge of pertinent work processes and procedures, and familiarity with related computer programming practices, system software, and computer equipment.</p> <p>This analyst provides several phases of the required systems analysis where the nature of the system is predetermined, uses established fact-finding approaches, knowledge of pertinent work processes and procedures, and familiarity with related computer programming practices, system software, and computer equipment.</p> <p>Carries out fact finding and analyses as assigned, usually of a single activity or a routine problem, and applies established procedures where the nature of the system, feasibility, computer equipment, and programming language have already been decided.</p> <p>May assist a higher-level systems analyst by preparing the detailed specifications required by computer programmers from information developed by the higher-level analyst.</p> <p>May research routine user problems and solve them by modifying the existing system when the solutions follow clear precedents.</p> <p>Prepare cost and deadline estimates as required for review.</p> <p>Works independently to adapt guides to specific situations; resolve problems and deviations according to established practices; and obtain advice where precedents are unclear or not available.</p> <p>Carries out objectives, priorities, and deadlines as defined by the supervisor.</p> <p>May supervise technician and others who assist in specific assignments.</p> <p>Will have some variation within and across contracts and may list additional or specific job duties related to assigned function/level which are not aforementioned.</p> <h4>Minimum requirements</h4> <p>High school diploma or equivalent is required. Certification of education level is required.</p> <p>CompTIA Security+ certification.</p> <p>Must possess two (2) years of related experience in computer systems analysis.</p> <p>Ability to obtain and maintain a US government SECRET clearance is required (prefer active Secret clearance). US citizenship is required for SECRET clearance at this work location.</p> <p>A valid U.S. passport is required to travel internationally. Passport must have a minimum of 6 blank pages and 2 plus year validity on expiration date of passport.</p> <p>Must be able to pass CENTCOM medical requirements for deployment.</p> <p>Must be able to obtain a visa in CENTCOM locations.</p> <h4>Knowledge & skills</h4> <ul> <li>Requires competence in most phases of system analysis.</li> <li>Systems analysis and design skills in an area such as a record keeping or scientific operation.</li> <li>Knowledge of pertinent system software and computer equipment.</li> <li>Knowledge of work processes, applicable regulations, and practices of the assigned subject-matter area.</li> <li>Ability to recognize probable interactions of related computer systems and predict impact of a change in assigned system.</li> <li>Good problem-solving skills.</li> <li>Self-motivated and the ability to work independently.</li> </ul> <h4>Physical requirements/working environment</h4> <ul> <li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li> <li>Must be able to lift/push/pull minimum of 50 pounds.</li> <li>May work in maintenance shop or outside.</li> <li>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</li> <li>May be exposed to extreme noise from operating equipment.</li> <li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li> <li>May be expected to work in austere environments and all weather conditions.</li> </ul></p><p></p>