Packing & Packaging Technician Jobs in Iraq

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>EPP III, Generator (3 - 150KW) and HVAC Technician SWA (Bahrain, UAE, Saudia Arabia, Kuwait, Jordan, Iraq) Perform troubleshooting, diagnostics, maintenance, and services on all types of military and commercial generators and HVAC systems used by the U.S. Army to include the 150kW EPP III generators. MEANINGFUL WORK AND PERSONAL IMPACT As a Generator and HVAC Mechanic, the work you ll do at GDIT will be impactful to the mission of the Worldwide Field Support contract for the U.S. Army. You ll play a crucial role in providing on-site technical and maintenance assistance, analyzing complex technical problems, and providing training to site operations and maintenance personnel. Perform maintenance and sustainment support on 3kW to 150kW, 500 0hz generators involving installation and removal of generators from fixed and mobile locations, troubleshoots and repair alternating current (AC) systems, direct current (DC) systems, electronic control systems and other program logic controls, electrical wiring and accessories. Perform overhaul, maintenance and sustainment support on 3kW to 150kW, 500 0hz generators involving installation and removal of generators from fixed and mobile locations, troubleshoots and repair alternating current (AC) systems, direct current (DC) systems, electronic control systems and other program logic controls, electrical wiring and accessories. Troubleshoot and repair HVAC, Chillers, and Environmental Control Units some are standalone units and others are mounted on trailers and vehicles. Maintain all types of commercial power generation equipment; military spec generators and Uninterrupted Power Systems (UPS). Operate a Load bank during testing Fabricate wire harnesses and solder terminals. Some work will be in a generator shop environment, and some work will be in a field environment. Other duties as assigned.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bring your Generator and HVAC expertise along with a drive for innovation to GDIT. The Generator and HVAC Mechanic must have: Education: High School diploma Experience: BA/BS plus 2 years experience, AA/AS/plus 4 years experience, or a High School diploma and 7 years experience Technical skills: Extensive diesel generator experience. Knowledge of generator parallel systems and switch gear. Experience with brazing copper tubing and evacuating and recharging refrigerant. Security Clearance: Able to obtain and maintain a Secret Clearance. Travel to Bahrain, UAE, Saudia Arabia, Kuwait, Jordan, Iraq Role requirements: US passport must not expire for at least 2 years, valid US driver s license, and an international driver s permit (AAA). Ability to pass CRC to deploy.</p><p></p></section>

<p>The primary responsibility of the Mechanic Steam and Gas - is to safely accomplish the installation, maintenance and repair of the heavy rotating machinery used mainly in power generation applications. Turbine Mechanics work closely with Supervisors, EHS personnel, and the Operations Department to achieve these goals. You may be assigned other duties to help proactively drive our FieldCore vision and align with our organization s core values.</p><p>Essential Duties &amp; Responsibilities:</p><ul><li>Read blueprints, schematic drawings and technical documentation to determine proper work procedures.</li><li>Install machinery and equipment according to layout plans, blueprints and other drawings in industrial establishments.</li><li>Dismantle and assemble machinery and equipment using a variety of hand, power, pneumatic and hydraulic tools.</li><li>Perform mechanical and electrical maintenance and repairs on power tools, hand tools and training equipment.</li><li>Move machinery and equipment using hoists, cranes, chain falls and trucks.</li><li>Align machinery and equipment using hoists, squares, rules, micrometers, plumb bobs, dial indicators and/or laser alignment equipment.</li><li>Perform machining and welding operations for making various parts for lab and shop training equipment</li><li>Perform material and machine inspections using precision measuring equipment such as micrometers, rules, calipers, protractors, and torque wrenches.</li><li>Responsible for shipping and receiving all major pieces for T&amp;DC, plus all shipping, receiving, inventory, and control of tools, equipment and supplies</li><li>Determine equipment specifications and prepare parts lists for purchasing, consisting of mechanical, electrical, and hydraulic devices as needed to complete assigned projects.</li><li>Load, transport, and unload materials, tools, equipment and supplies.</li><li>Availability to travel and be away from home for extended periods of time</li><li>Ability and willingness to work holidays, weekends and overtime as required by field assignments</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Degree or associate degree in Technical Field, Gas Turbine Systems Technician preferred</li><li>Must have a minimum of two (2) years experience maintaining, dismantling, and installing machinery and industrial service equipment including various pumps, motors, fans, generators, and turbines.</li><li>Must have experience performing equipment alignments using either laser or traditional methods.</li><li>Must have Driver s License</li><li>Must possess minimum required hand tools.</li></ul><p>Desired Characteristics:</p><ul><li>Qualified level. Able to successfully perform all requirements of the job properly.</li><li>Possess advanced skills and applies the fundamental concepts, practices and procedures of a particular field of specialization.</li><li>Has solid skills acquired with trainings and required to disassemble and reassemble complex rotating equipment</li><li>Bolting, Hydraulic Bolting, Flange Management, Small Bore Piping, Basic Rigging/Lifting, O/H Crane Operator</li><li>Good mechanical/technical skills.</li><li>Good oral communication skills and critical thinking ability.</li><li>May be required to handle time-sensitive tasks and maintain a schedule within operationally challenging environments.</li><li>Must work well both independently and in a team environment.</li></ul>

<p><h4>Job description</h4> <p>The computer systems analyst I provides several phases of the required systems analysis where the nature of the system is predetermined, uses established fact-finding approaches, knowledge of pertinent work processes and procedures, and familiarity with related computer programming practices, system software, and computer equipment.</p> <p>This analyst provides several phases of the required systems analysis where the nature of the system is predetermined, uses established fact-finding approaches, knowledge of pertinent work processes and procedures, and familiarity with related computer programming practices, system software, and computer equipment.</p> <p>Carries out fact finding and analyses as assigned, usually of a single activity or a routine problem, and applies established procedures where the nature of the system, feasibility, computer equipment, and programming language have already been decided.</p> <p>May assist a higher-level systems analyst by preparing the detailed specifications required by computer programmers from information developed by the higher-level analyst.</p> <p>May research routine user problems and solve them by modifying the existing system when the solutions follow clear precedents.</p> <p>Prepare cost and deadline estimates as required for review.</p> <p>Works independently to adapt guides to specific situations; resolve problems and deviations according to established practices; and obtain advice where precedents are unclear or not available.</p> <p>Carries out objectives, priorities, and deadlines as defined by the supervisor.</p> <p>May supervise technician and others who assist in specific assignments.</p> <p>Will have some variation within and across contracts and may list additional or specific job duties related to assigned function/level which are not aforementioned.</p> <h4>Minimum requirements</h4> <p>High school diploma or equivalent is required. Certification of education level is required.</p> <p>CompTIA Security+ certification.</p> <p>Must possess two (2) years of related experience in computer systems analysis.</p> <p>Ability to obtain and maintain a US government SECRET clearance is required (prefer active Secret clearance). US citizenship is required for SECRET clearance at this work location.</p> <p>A valid U.S. passport is required to travel internationally. Passport must have a minimum of 6 blank pages and 2 plus year validity on expiration date of passport.</p> <p>Must be able to pass CENTCOM medical requirements for deployment.</p> <p>Must be able to obtain a visa in CENTCOM locations.</p> <h4>Knowledge & skills</h4> <ul> <li>Requires competence in most phases of system analysis.</li> <li>Systems analysis and design skills in an area such as a record keeping or scientific operation.</li> <li>Knowledge of pertinent system software and computer equipment.</li> <li>Knowledge of work processes, applicable regulations, and practices of the assigned subject-matter area.</li> <li>Ability to recognize probable interactions of related computer systems and predict impact of a change in assigned system.</li> <li>Good problem-solving skills.</li> <li>Self-motivated and the ability to work independently.</li> </ul> <h4>Physical requirements/working environment</h4> <ul> <li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li> <li>Must be able to lift/push/pull minimum of 50 pounds.</li> <li>May work in maintenance shop or outside.</li> <li>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</li> <li>May be exposed to extreme noise from operating equipment.</li> <li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li> <li>May be expected to work in austere environments and all weather conditions.</li> </ul></p><p></p>

<p><h4>Job description</h4> <p>The computer systems analyst I provides several phases of the required systems analysis where the nature of the system is predetermined, uses established fact-finding approaches, knowledge of pertinent work processes and procedures, and familiarity with related computer programming practices, system software, and computer equipment.</p> <p>This analyst provides several phases of the required systems analysis where the nature of the system is predetermined, uses established fact-finding approaches, knowledge of pertinent work processes and procedures, and familiarity with related computer programming practices, system software, and computer equipment.</p> <p>Carries out fact finding and analyses as assigned, usually of a single activity or a routine problem, and applies established procedures where the nature of the system, feasibility, computer equipment, and programming language have already been decided.</p> <p>May assist a higher-level systems analyst by preparing the detailed specifications required by computer programmers from information developed by the higher-level analyst.</p> <p>May research routine user problems and solve them by modifying the existing system when the solutions follow clear precedents.</p> <p>Prepare cost and deadline estimates as required for review.</p> <p>Works independently to adapt guides to specific situations; resolve problems and deviations according to established practices; and obtain advice where precedents are unclear or not available.</p> <p>Carries out objectives, priorities, and deadlines as defined by the supervisor.</p> <p>May supervise technician and others who assist in specific assignments.</p> <p>Will have some variation within and across contracts and may list additional or specific job duties related to assigned function/level which are not aforementioned.</p> <h4>Minimum requirements</h4> <p>High school diploma or equivalent is required. Certification of education level is required.</p> <p>CompTIA Security+ certification.</p> <p>Must possess two (2) years of related experience in computer systems analysis.</p> <p>Ability to obtain and maintain a US government SECRET clearance is required (prefer active Secret clearance). US citizenship is required for SECRET clearance at this work location.</p> <p>A valid U.S. passport is required to travel internationally. Passport must have a minimum of 6 blank pages and 2 plus year validity on expiration date of passport.</p> <p>Must be able to pass CENTCOM medical requirements for deployment.</p> <p>Must be able to obtain a visa in CENTCOM locations.</p> <h4>Knowledge & skills</h4> <ul> <li>Requires competence in most phases of system analysis.</li> <li>Systems analysis and design skills in an area such as a record keeping or scientific operation.</li> <li>Knowledge of pertinent system software and computer equipment.</li> <li>Knowledge of work processes, applicable regulations, and practices of the assigned subject-matter area.</li> <li>Ability to recognize probable interactions of related computer systems and predict impact of a change in assigned system.</li> <li>Good problem-solving skills.</li> <li>Self-motivated and the ability to work independently.</li> </ul> <h4>Physical requirements/working environment</h4> <ul> <li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li> <li>Must be able to lift/push/pull minimum of 50 pounds.</li> <li>May work in maintenance shop or outside.</li> <li>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</li> <li>May be exposed to extreme noise from operating equipment.</li> <li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li> <li>May be expected to work in austere environments and all weather conditions.</li> </ul></p><p></p>

<p>The Avionics Technician performs aircraft maintenance to include inspection, operational test, repair, modification and replacement of aircraft electrical / avionics systems and components. Applies technical knowledge and skills to troubleshoot electrical / avionics discrepancies.</p> <div> <div> <div> <div> <div> <div> <div> <div> <div> <p> </p> <p> <b>Essential Responsibilities:</b> </p> <ul> <li> <p>Possess in-depth knowledge of applicable maintenance/technical manuals and publications, and special tools and test equipment. Must be familiar with operational capabilities and limitations of electrical/avionics systems</p> </li> <li> <p>Possess a high degree of expertise of aircraft electrical/avionics systems</p> </li> <li> <p>Performs the inspection, testing, troubleshooting, repair, modification and rewiring as required of complex avionics/electrical systems and subsystems discrepancies and modifications</p> </li> <li> <p>Use schematic diagrams, blueprint drawings, maintenance manuals and factory publications to operate, modify, test and repair aircraft electrical / avionics systems.</p> </li> <li> <p>Utilize test equipment to include but not limited to digital volt / amp meter, transponder ramp tester, fuel quantity tester, ITT calibration test set, and other test equipment required in the troubleshooting, modification, and repair of avionics / electrical systems.</p> </li> <li> <p>Order parts and materials.</p> </li> <li> <p>Obtain and maintain qualification as a Plane Captain and any associated licenses/qualifications necessary to perform the duties of an OMAT2. </p> </li> <li> <p>Operate ground support equipment.</p> </li> <li> <p>Identify and treat avionics/ electrical corrosion.</p> </li> <li> <p>Perform aircraft jacking and hoisting as required.</p> </li> <li> <p>Perform certification and re-certification of altimeter systems.</p> </li> <li> <p>Perform calibration of directional guidance systems.</p> </li> <li> <p>Required to perform collateral duty inspections.</p> </li> <li> <p>Must obtain and keep current turn qualification.</p> </li> <li> <p>Maintain cleanliness of the work center.</p> </li> <li> <p>Comply with Foreign Object Damage (FOD), Egress Familiarization, and Hazardous Waste and Tool Control programs.</p> </li> <li> <p>Comply with all established general and industrial safety rules and regulations as applicable to the contract, facility, and job assignment.</p> </li> <li> <p>Assist as directed to ensure safety, security and preservation of government / company owned equipment.</p> </li> <li> <p>Present a courteous and professional demeanor when dealing with customers.</p> </li> <li> <p>Furnish and maintain own hand tools.</p> </li> <li> <p>Operate portable firefighting equipment.</p> </li> <li> <p>Operate aircraft ground servicing equipment including vehicles, tugs, tractors, servicing carts, aircraft jacks and hoists, test equipment, hand tools, power tools.</p> </li> <li> <p>Perform all other position related duties as assigned or requested.</p> </li> </ul> <p> </p> <p> <b>Minimum Qualifications:</b> </p> <ul> <li> <p>Satisfactory completion of U.S. Armed Forces aircraft avionics school or other schools with equivalent curriculum or three (3) years of on-the-job training and / or experience working with similar avionics systems and components is required.</p> </li> <li> <p>Graduation from high school or GED required.</p> </li> <li> <p>Must be able to meet any Government / Company licensing / qualification requirements for the position.</p> </li> <li> <p>Must have an FAA Airframe and Powerplant (A&amp;P) License.</p> </li> <li> <p>Must have three (3) years experience in T6 aircraft electrical / avionics maintenance including avionics corrosion detection, treatment and prevention, performing maintenance on avionics and/ or electrical systems, utilizing tools, blueprints, drawings, wiring diagrams, schematics and normal safety requirement.</p> </li> <li> <p>Demonstrate a basic knowledge of aircraft systems and nomenclature. </p> </li> <li> <p>Possess working knowledge and skill in the use of basic tools and test equipment.</p> </li> <li> <p>Must be familiar with the operational capabilities and limitations of electrical / avionics systems.</p> </li> <li> <p>Possess a working knowledge of the detection, prevention, and treatment of corrosion.</p> </li> <li> <p>Must be able to read, write, understand, and communicate the English language and follow verbal and written instruction.</p> </li> <li> <p>Must obtain and keep current turn qualification.</p> </li> </ul> </div></div></div></div></div></div></div></div></div>

<p><h4>Essential responsibilities:</h4> <p>The avionics technician performs aircraft maintenance to include inspection, operational test, repair, modification and replacement of aircraft electrical/avionics systems and components. Applies technical knowledge and skills to troubleshoot electrical/avionics discrepancies.</p> <ul> <li>Possess in-depth knowledge of applicable maintenance/technical manuals and publications, and special tools and test equipment. Must be familiar with operational capabilities and limitations of electrical/avionics systems.</li> <li>Possess a high degree of expertise of aircraft electrical/avionics systems.</li> <li>Performs the inspection, testing, troubleshooting, repair, modification and rewiring as required of complex avionics/electrical systems and subsystems discrepancies and modifications.</li> <li>Use schematic diagrams, blueprint drawings, maintenance manuals and factory publications to operate, modify, test and repair aircraft electrical/avionics systems.</li> <li>Utilize test equipment to include but not limited to digital volt/amp meter, transponder ramp tester, fuel quantity tester, ITT calibration test set, and other test equipment required in the troubleshooting, modification, and repair of avionics/electrical systems.</li> <li>Order parts and materials.</li> <li>Obtain and maintain qualification as a plane captain and any associated licenses/qualifications necessary to perform the duties of an OMAT2.</li> <li>Operate ground support equipment.</li> <li>Identify and treat avionics/electrical corrosion.</li> <li>Perform aircraft jacking and hoisting as required.</li> <li>Perform certification and re-certification of altimeter systems.</li> <li>Perform calibration of directional guidance systems.</li> <li>Required to perform collateral duty inspections.</li> <li>Must obtain and keep current turn qualification.</li> <li>Maintain cleanliness of the work center.</li> <li>Comply with foreign object damage (FOD), egress familiarization, and hazardous waste and tool control programs.</li> <li>Comply with all established general and industrial safety rules and regulations as applicable to the contract, facility, and job assignment.</li> <li>Assist as directed to ensure safety, security and preservation of government/company owned equipment.</li> <li>Present a courteous and professional demeanor when dealing with customers.</li> <li>Furnish and maintain own hand tools.</li> <li>Operate portable firefighting equipment.</li> <li>Operate aircraft ground servicing equipment including vehicles, tugs, tractors, servicing carts, aircraft jacks and hoists, test equipment, hand tools, power tools.</li> <li>Perform all other position related duties as assigned or requested.</li> </ul> <h4>Minimum qualifications:</h4> <ul> <li>Satisfactory completion of U.S. Armed Forces aircraft avionics school or other schools with equivalent curriculum or three (3) years of on-the-job training and/or experience working with similar avionics systems and components is required.</li> <li>Graduation from high school or GED required.</li> <li>Must be able to meet any government/company licensing/qualification requirements for the position.</li> <li>Must have an FAA Airframe and Powerplant (A&P) license.</li> <li>Must have three (3) years’ experience in T6 aircraft electrical/avionics maintenance including avionics corrosion detection, treatment and prevention, performing maintenance on avionics and/or electrical systems, utilizing tools, blueprints, drawings, wiring diagrams, schematics and normal safety requirements.</li> <li>Demonstrate a basic knowledge of aircraft systems and nomenclature.</li> <li>Possess working knowledge and skill in the use of basic tools and test equipment.</li> <li>Must be familiar with the operational capabilities and limitations of electrical/avionics systems.</li> <li>Possess a working knowledge of the detection, prevention, and treatment of corrosion.</li> <li>Must be able to read, write, understand, and communicate the English language and follow verbal and written instruction.</li> <li>Must obtain and keep current turn qualification.</li> </ul></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Lead a Team of Warehousemen, Clerks and Operators and mainting smooth logistic planning of the Warehouse</p><p>Completes shipments by processing and loading orders. Prepares orders by processing requests and supply orders; pulling materials; packing boxes; placing orders in delivery area. Completes deliveries by driving truck or van to and from vendors. Maintains truck or van by completing preventive maintenance requirements and arranging for repairs. Enforces inventory controls by collecting stock location orders and printing requests. Provides quality service by following organization standards. Preserves safe and clean work environment by keeping shelves, pallet area, and workstations neat. Promotes clean shipping supply area by complying with procedures, rules, and regulations. Completes reports by entering required information. Contributes to team effort by accomplishing related results as needed.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Gradute with 5- 10 yrs experience of warehouse management</p><p></p></section>

<p>The Air Crew Life Support Technician will perform inspections, maintenance and troubleshooting tasks on T-6A aircraft. Essential Responsibilities but not limited to:</p><ul><li>Perform launch, recovery, scheduled and unscheduled inspections/maintenance.</li><li>Preflight/thru flight/BPO inspections, ground handling, minor maintenance, and servicing.</li><li>Perform routine troubleshooting, installation, repair and maintenance of all electro-mechanical systems and components on the aircraft at the organizational level of maintenance.</li><li>Services aircraft. Performs end-of-runway, post-flight, preflight, thru-flight, and phase inspections.</li><li>Troubleshoots and maintains aircraft structures, systems, components, and related equipment. Removes and installs aircraft components.</li><li>Performs inspections, scheduled and unscheduled maintenance on the company aircraft in accordance with FAA regulations, manufacturer and company maintenance manuals and procedures.</li><li>Services, operates, and maintains ground support equipment and performs interior and exterior cleaning of aircraft and work areas. Must precisely complete all maintenance documentation.</li><li>Perform all other position related duties as assigned or requested.</li></ul><p>Minimum Position Knowledge, Skills, and Abilities Required:</p><ul><li>Must have a current FAA Airframe and Powerplant (A&amp;P) license in good standing.</li><li>At least four (4) years of directly related heavy aircraft maintenance experience is highly desired. Experience must include complying with all applicable aircraft servicing procedures, aircraft maintenance manuals and parts catalogs.</li><li>Experience with OBOGS systems and T-6 Life support required.</li><li>2.5 Years Textron T6 Texan II aircraft maintenance experience with in the last 5 years required.</li><li>Must read, interpret and use manufacturers and aircraft maintenance manuals, service bulletins, blueprints, wiring/schematic diagrams, data tables and other specifications to determine feasibility and method to repair or replace malfunctioning or damaged components.</li><li>Must be able to inspect, repair, and operate ground support and auxiliary equipment.</li><li>Possess a current state issued driver s license.</li><li>Must be able to obtain and maintain U.S. passport for facility credentials/authorization.</li><li>NOTE: U.S. citizenship is required for facility credentials/authorization at this work site.</li></ul><p>Work Environment, Physical Demands, and Mental Demands:</p><ul><li>Must possess the ability to carry and lift overhead up to 50 pounds.</li><li>Duties include walking, climbing, standing, stooping, stretching, and squatting for purposes of moving equipment, boarding and de-boarding the aircraft, performing maintenance using ladders, and performing maintenance atop and below aircraft.</li><li>Must be able to work at high altitudes when performing flight attendant duties.</li><li>Work is primarily performed outside in a high-level noise environment.</li><li>Performing maintenance in low-light areas, operating support equipment after daylight hours. Work is occasionally performed in inclement weather.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Must have a current FAA Airframe and Powerplant (A&amp;P) license in good standing.</p><p>At least four (4) years of directly related heavy aircraft maintenance experience is highly desired. Experience must include complying with all applicable aircraft servicing procedures, aircraft maintenance manuals and parts catalogs.</p><p>Experience with OBOGS systems and T-6 Life support required.</p><p>2.5 Years Textron T6 Texan II aircraft maintenance experience with in the last 5 years required.</p><p>Must read, interpret and use manufacturers and aircraft maintenance manuals, service bulletins, blueprints, wiring/schematic diagrams, data tables and other specifications to determine feasibility and method to repair or replace malfunctioning or damaged components.</p><p>Must be able to inspect, repair, and operate ground support and auxiliary equipment.</p><p>Possess a current state issued driver s license.</p><p>Must be able to obtain and maintain U.S. passport for facility credentials/authorization.</p><p>NOTE: U.S. citizenship is required for facility credentials/authorization at this work site.</p><p>Must possess the ability to carry and lift overhead up to 50 pounds.</p><p>Duties include walking, climbing, standing, stooping, stretching, and squatting for purposes of moving equipment, boarding and de-boarding the aircraft, performing maintenance using ladders, and performing maintenance atop and below aircraft.</p><p>Must be able to work at high altitudes when performing flight attendant duties.</p><p>Work is primarily performed outside in a high-level noise environment.</p><p>Performing maintenance in low-light areas, operating support equipment after daylight hours. Work is occasionally performed in inclement weather.</p>

<p>The Air Crew Life Support Technician will perform inspections, maintenance and troubleshooting tasks on T-6A aircraft. Essential Responsibilities but not limited to: Perform launch, recovery, scheduled and unscheduled inspections/maintenance. Preflight/thru flight/BPO inspections, ground handling, minor maintenance, and servicing. Perform routine troubleshooting, installation, repair and maintenance of all electro-mechanical systems and components on the aircraft at the organizational level of maintenance. Services aircraft. Performs end-of-runway, post-flight, preflight, thru-flight, and phase inspections. Troubleshoots and maintains aircraft structures, systems, components, and related equipment. Removes and installs aircraft components. Performs inspections, scheduled and unscheduled maintenance on the company aircraft in accordance with FAA regulations, manufacturer and company maintenance manuals and procedures. Services, operates, and maintains ground support equipment and performs interior and exterior cleaning of aircraft and work areas. Must precisely complete all maintenance documentation. Perform all other position related duties as assigned or requested.</p><p>Must have a current FAA Airframe and Powerplant (A&amp;P) license in good standing. At least four (4) years of directly related heavy aircraft maintenance experience is highly desired. Experience must include complying with all applicable aircraft servicing procedures, aircraft maintenance manuals and parts catalogs. Experience with OBOGS systems and T-6 Life support required. 2.5 Years Textron T6 Texan II aircraft maintenance experience with in the last 5 years required. Must read, interpret and use manufacturers and aircraft maintenance manuals, service bulletins, blueprints, wiring/schematic diagrams, data tables and other specifications to determine feasibility and method to repair or replace malfunctioning or damaged components. Must be able to inspect, repair, and operate ground support and auxiliary equipment. Possess a current state issued driver s license. Must be able to obtain and maintain U.S. passport for facility credentials/authorization. NOTE: U.S. citizenship is required for facility credentials/authorization at this work site.</p><p>Must possess the ability to carry and lift overhead up to 50 pounds. Duties include walking, climbing, standing, stooping, stretching, and squatting for purposes of moving equipment, boarding and de-boarding the aircraft, performing maintenance using ladders, and performing maintenance atop and below aircraft. Must be able to work at high altitudes when performing flight attendant duties. Work is primarily performed outside in a high-level noise environment. Performing maintenance in low-light areas, operating support equipment after daylight hours. Work is occasionally performed in inclement weather.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Must have a current FAA Airframe and Powerplant (A&amp;P) license in good standing.</li><li>At least four (4) years of directly related heavy aircraft maintenance experience is highly desired.</li><li>Experience must include complying with all applicable aircraft servicing procedures, aircraft maintenance manuals and parts catalogs.</li><li>Experience with OBOGS systems and T-6 Life support required.</li><li>2.5 Years Textron T6 Texan II aircraft maintenance experience with in the last 5 years required.</li><li>Must read, interpret and use manufacturers and aircraft maintenance manuals, service bulletins, blueprints, wiring/schematic diagrams, data tables and other specifications to determine feasibility and method to repair or replace malfunctioning or damaged components.</li><li>Must be able to inspect, repair, and operate ground support and auxiliary equipment.</li><li>Possess a current state issued driver s license.</li><li>Must be able to obtain and maintain U.S. passport for facility credentials/authorization.</li><li>NOTE: U.S. citizenship is required for facility credentials/authorization at this work site.</li><li>Must possess the ability to carry and lift overhead up to 50 pounds.</li><li>Duties include walking, climbing, standing, stooping, stretching, and squatting for purposes of moving equipment, boarding and de-boarding the aircraft, performing maintenance using ladders, and performing maintenance atop and below aircraft.</li><li>Must be able to work at high altitudes when performing flight attendant duties.</li><li>Work is primarily performed outside in a high-level noise environment.</li><li>Performing maintenance in low-light areas, operating support equipment after daylight hours.</li><li>Work is occasionally performed in inclement weather.</li></ul>

<p>Introduction Established in 1951, IOM is a Related Organization of the United Nations and the leading UN agency in the field of migration. Working closely with governmental, intergovernmental and non-governmental partners, IOM promotes humane and orderly migration for the benefit of all. It saves lives and protects people on the move, drives solutions to displacement, and facilitates pathways for regular migration, while providing services and advice to governments and migrants. IOM is committed to fostering a respectful, inclusive and supportive workplace where all employees can thrive professionally and feel valued. By creating such an environment, IOM aims to better harness the full potential of migration and strengthen its support to people on the move. IOM invites candidates from diverse backgrounds to apply and provides reasonable accommodation throughout the recruitment process when required. Learn more about IOM s workplace culture at IOM workplace culture | International Organization for Migration Applications are welcome from internal and external candidates. For all IOM vacancies, applications from qualified and eligible first-tier candidates are considered before those of qualified and eligible second-tier candidates in the selection process. For the purpose of this vacancy, internal and internal-equivalent candidates are considered as first-tier candidates.</p><p>Organizational Context and Scope Under general guidance of the Chief of Mission (CoM), the overall supervision of the Head of Resources Management and Supply Chain Officer and, the direct supervision of the Senior Supply Chain Assistant - Logistic is responsible for the following:</p><p>Assist the Supply Chain Officer in the planning of procurement activities and analysing of purchasing trends. Identify Supply Chain bottlenecks and propose the way to fill in the gaps. Plan and prepare procurement actions and analyze procurement requests, identify service providers, evaluate information regarding vendor s performance regarding quality, prices delivery of equipment in respect of organizations best interests. Solicit bids or quotations, analyzing them for conformity to specified requirements, conduct appraisals and select suppliers, and confirm terms of payment. Prepare purchase orders and ensure receiving authorization by CoM, Supply Chain Officer according to the IOM Procurement Manual. Participate in the negociation ofcertain conditions of contracts in full compliance with IOM rules and regulations. Monitor that procurement transactions are tracked to facilitate timely delivery and shorter procurement lead times. Monitor that payments for goods and services ordered are made in timely manner and according to IOM Procurement guidelines. Ensure that the Goods Receipt Notes are acknowledged by the requisitioner upon services/works are rendered and/or the goods are received.</p><p>Logistics Monitor and track office supplies such as stationary and cleaning materials on a monthly basis. Prepare and submit to Finance Unit all payments related to Logistics services such as Utility Bills, Internet Bills, and Landlines Bills at the end of every month. Fleet management ensure that vehicle movement requests, both IOM and rented vehicles are supported and each vehicle has a vehicle logbook allocated. Ensure vehicle data is uploaded into the system in a timely and accurate manner to be able to generate monthly utilization and fuel consumption reports. Ensure Registration of all IOM assets and/or disposal with accordance with IOM procedures and regulations, and make sure that all the needed forms are signed by the staff upon assigning/releasing assets. Conduct and follow-up the fuel consumption for generators and track usage via log sheet. Communicate with the generators technician with regards to the generator's maintenance. Perform any other duties as assigned by Supply Chain Officer.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>University degree in Procurement, Business Administration, Logistics, or a related field from an accredited academic institution with three years of relevant professional experience, or Completed High School degree from an accredited academic institution with five years of relevant professional experience. Accredited Universities are those listed in the UNESCO World Higher Education Database.</li><li>Professional experience with specific focus on local/international procurement, clearing &amp; forwarding, VAT, GoI laws and regulations, Fleet management experience and insurance management</li><li>Experience in inventory/stock/supplies management.</li><li>Experience working with an international organization or NGO in the procurement section</li><li>Fluency in English, Kurdish and Arabic is required (oral and written).</li></ul>

<p>The UH-60 Aircraft Mechanic AM-II performs the full range of military tactical aircraft maintenance and maintains repairs and troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems. Remove and install aircraft subsystem assemblies and components such as engines, rotors, transmissions, mechanical flight controls and their components. Service and lubricate aircraft and subsystems. Safely prepare aircraft for inspections and maintenance checks and services. Perform scheduled inspections and assist in performing special inspections. Perform limited maintenance operational checks and diagnoses and troubleshoots aircraft systems using special tools and test equipment as required. Use and perform operator maintenance on tools, special tools and aircraft ground support equipment. Apply comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as aircraft Technical Manuals, Maintenance Information and Action Messages and all technical guidance provided through government official representatives. Maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components. Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and use required expertise in restoring equipment condition and or operation. Participate in maintenance test flights and operation checks as required. Perform other duties as requested.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>High school diploma or equivalent required.</li><li>Three (3) or more years aviation maintenance experience within the past five (5) years on the (MDS) -UH60. OR FAA A&amp;P license AND Two (2) years of aviation maintenance experience within the past Five (5) years on the (MDS)- UH60.</li><li>U.S. military technical school or specialized training course is desired, certification of education level is required.</li><li>Must be in possession of a Valid U.S. Passport valid for 2 years at the time of hiring and be able to travel internationally.</li><li>Must be able to obtain and maintain facility Public Trust NAC-I. "Note: US Citizenship is required for facility Public Trust NAC-I at this work location".</li><li>Must be able to clear CENTCOM MOD Physicals requirements for deployment training (Will be required to attend CRC (DIDC).</li><li>Must be able to obtain Iraq Visa.</li><li>Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts.</li><li>Broad knowledge of aircraft sheet metal/structural modifications and repair.</li><li>Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers.</li><li>Working knowledge of technical publications and Logistics Information Systems.</li><li>Able to prioritize workloads to maintain schedules on assigned projects and may be required to lead teams through more complex aircraft relevant tasks.</li><li>Participate in maintenance test flights and operation checks as required.</li><li>Possess the level of experience to inspect all required aeronautical type maintenance to be performed by Mechanics.</li><li>The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.</li><li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li><li>Must be able to climb stairs, ramps, ladders, and work stands.</li><li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li><li>May be required to lift heavy objects whose weight may exceed 50 pounds.</li><li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li><li>Will handle dirty parts and lubricants.</li><li>Will be required to wear proper Personal Protective Equipment (PPE).</li><li>Must be able to pass a Respirator Physical and Fit Test</li><li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</li><li>Must be able to lift/push/pull minimum of 50 pounds.</li><li>May work in maintenance shop or outside.</li><li>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</li><li>May be exposed to extreme noise from operating equipment.</li><li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li><li>May be expected to work in austere environments and all-weather conditions.</li></ul>

<p>The UH-60 Aircraft Mechanic AM-II performs the full range of military tactical aircraft maintenance and maintains repairs and troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems.</p><p>• Remove and install aircraft subsystem assemblies and components such as engines, rotors, transmissions, mechanical flight controls and their components.</p><p>• Service and lubricate aircraft and subsystems.</p><p>• Safely prepare aircraft for inspections and maintenance checks and services.</p><p>• Perform scheduled inspections and assist in performing special inspections.</p><p>• Perform limited maintenance operational checks and diagnoses and troubleshoots aircraft systems using special tools and test equipment as required.</p><p>• Use and perform operator maintenance on tools, special tools and aircraft ground support equipment.</p><p>• Apply comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as aircraft Technical Manuals, Maintenance Information and Action Messages and all technical guidance provided through government official representatives.</p><p>• Maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components.</p><p>• Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and use required expertise in restoring equipment condition and or operation.</p><p>• Participate in maintenance test flights and operation checks as required.</p><p>• Perform other duties as requested.</p><p><strong>Knowledge &amp; Skills</strong></p><p>• Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts.</p><p>• Broad knowledge of aircraft sheet metal/structural modifications and repair.</p><p>• Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers.</p><p>• Working knowledge of technical publications and Logistics Information Systems.</p><p>• Able to prioritize workloads to maintain schedules on assigned projects and may be required to lead teams through more complex aircraft relevant tasks.</p><p>• Participate in maintenance test flights and operation checks as required.</p><p>• Possess the level of experience to inspect all required aeronautical type maintenance to be performed by Mechanics.</p><p>• The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.</p><p><strong>Physical Requirements/Working Environment</strong></p><p>• Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</p><p>• Must be able to climb stairs, ramps, ladders, and work stands.</p><p>• Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</p><p>• May be required to lift heavy objects whose weight may exceed 50 pounds.</p><p>• Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</p><p>• Will handle dirty parts and lubricants.</p><p>• Will be required to wear proper Personal Protective Equipment (PPE).</p><p>• Must be able to pass a Respirator Physical and Fit Test</p><p>• May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</p><p>• Must be able to lift/push/pull minimum of 50 pounds.</p><p>• May work in maintenance shop or outside.</p><p>• Must be able to work in a shop where the environment is drafty, noisy, and dirty.</p><p>• May be exposed to extreme noise from operating equipment.</p><p>• May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</p><p>• May be expected to work in austere environments and all-weather conditions.</p><p><strong>Desired Candidate Profile</strong></p><p>Minimum Requirements:</p><ul><li>High school diploma or equivalent required.</li><li>Three (3) or more years aviation maintenance experience within the past five (5) years on the (MDS) -UH60.</li><li>OR FAA A&amp;P license AND Two (2) years of aviation maintenance experience within the past Five (5) years on the (MDS)- UH60.</li><li>U.S. military technical school or specialized training course is desired, certification of education level is required.</li><li>Must be in possession of a Valid U.S. Passport valid for 2 years at the time of hiring and be able to travel internationally.</li><li>Must be able to obtain and maintain facility Public Trust NAC-I. "Note: US Citizenship is required for facility Public Trust NAC-I at this work location".</li><li>Must be able to clear CENTCOM MOD Physicals requirements for deployment training (Will be required to attend CRC (DIDC).</li><li>Must be able to obtain Iraq Visa.</li></ul>

<p><h4>Job Description</h4> <p>The UH-60 Aircraft Mechanic AM-II performs the full range of military tactical aircraft maintenance and maintains, repairs, and troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneuhydraulic, engines, auxiliary power unit, and ventilation and heating systems.</p> <p>Remove and install aircraft subsystem assemblies and components such as engines, rotors, transmissions, mechanical flight controls and their components.</p> <p>Service and lubricate aircraft and subsystems.</p> <p>Safely prepare aircraft for inspections and maintenance checks and services.</p> <p>Perform scheduled inspections and assist in performing special inspections.</p> <p>Perform limited maintenance operational checks and diagnose and troubleshoot aircraft systems using special tools and test equipment as required.</p> <p>Use and perform operator maintenance on tools, special tools, and aircraft ground support equipment.</p> <p>Apply comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as aircraft technical manuals, maintenance information and action messages, and all technical guidance provided through government official representatives.</p> <p>Maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components.</p> <p>Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and use required expertise in restoring equipment condition and/or operation.</p> <p>Participate in maintenance test flights and operation checks as required.</p> <p>Perform other duties as requested.</p> <h4>Minimum Requirements</h4> <ul> <li>High school diploma or equivalent required.</li> <li>Three (3) or more years aviation maintenance experience within the past five (5) years on the (MDS)-UH60.</li> <li>OR FAA A&P license AND two (2) years of aviation maintenance experience within the past five (5) years on the (MDS)-UH60.</li> <li>U.S. military technical school or specialized training course is desired; certification of education level is required.</li> <li>Must be in possession of a valid U.S. passport valid for 2 years at the time of hiring and be able to travel internationally.</li> <li>Must be able to obtain and maintain facility Public Trust NAC-I. Note: US citizenship is required for facility Public Trust NAC-I at this work location.</li> <li>Must be able to clear CENTCOM MOD physical requirements for deployment training (will be required to attend CRC (DIDC)).</li> <li>Must be able to obtain Iraq visa.</li> </ul> <h4>Knowledge & Skills</h4> <ul> <li>Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures, and replacement of parts.</li> <li>Broad knowledge of aircraft sheet metal/structural modifications and repair.</li> <li>Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes, and shears.</li> <li>Working knowledge of technical publications and logistics information systems.</li> <li>Able to prioritize workloads to maintain schedules on assigned projects and may be required to lead teams through more complex aircraft relevant tasks.</li> <li>Participate in maintenance test flights and operation checks as required.</li> <li>Possess the level of experience to inspect all required aeronautical type maintenance to be performed by mechanics.</li> <li>The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.</li> </ul> <h4>Physical Requirements / Working Environment</h4> <ul> <li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li> <li>Must be able to climb stairs, ramps, ladders, and work stands.</li> <li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li> <li>May be required to lift heavy objects whose weight may exceed 50 pounds.</li> <li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li> <li>Will handle dirty parts and lubricants.</li> <li>Will be required to wear proper personal protective equipment (PPE).</li> <li>Must be able to pass a respirator physical and fit test.</li> <li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</li> <li>Must be able to lift/push/pull minimum of 50 pounds.</li> <li>May work in maintenance shop or outside.</li> <li>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</li> <li>May be exposed to extreme noise from operating equipment.</li> <li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li> <li>May be expected to work in austere environments and all-weather conditions.</li> </ul></p><p></p>

<p>The UH-60 Aircraft Mechanic AM-II performs the full range of military tactical aircraft maintenance and maintains repairs and troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems. Remove and install aircraft subsystem assemblies and components such as engines, rotors, transmissions, mechanical flight controls and their components. Service and lubricate aircraft and subsystems. Safely prepare aircraft for inspections and maintenance checks and services. Perform scheduled inspections and assist in performing special inspections. Perform limited maintenance operational checks and diagnoses and troubleshoots aircraft systems using special tools and test equipment as required. Use and perform operator maintenance on tools, special tools and aircraft ground support equipment. Apply comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as aircraft Technical Manuals, Maintenance Information and Action Messages and all technical guidance provided through government official representatives. Maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components. Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and use required expertise in restoring equipment condition and or operation. Participate in maintenance test flights and operation checks as required. Perform other duties as requested.</p><p>Knowledge &amp; Skills Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts. Broad knowledge of aircraft sheet metal/structural modifications and repair. Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. Working knowledge of technical publications and Logistics Information Systems. Able to prioritize workloads to maintain schedules on assigned projects and may be required to lead teams through more complex aircraft relevant tasks. Participate in maintenance test flights and operation checks as required. Possess the level of experience to inspect all required aeronautical type maintenance to be performed by Mechanics. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.</p><p>Physical Requirements/Working Environment Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day. Must be able to climb stairs, ramps, ladders, and work stands. Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders. May be required to lift heavy objects whose weight may exceed 50 pounds. Must be able to type using a standard keyboard to communicate through e-mail and various software applications. Will handle dirty parts and lubricants. Will be required to wear proper Personal Protective Equipment (PPE). Must be able to pass a Respirator Physical and Fit Test May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc. Must be able to lift/push/pull minimum of 50 pounds. May work in maintenance shop or outside. Must be able to work in a shop where the environment is drafty, noisy, and dirty. May be exposed to extreme noise from operating equipment. May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles. May be expected to work in austere environments and all-weather conditions.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>High school diploma or equivalent required.</li><li>Three (3) or more years aviation maintenance experience within the past five (5) years on the (MDS) -UH60. OR FAA A&amp;P license AND Two (2) years of aviation maintenance experience within the past Five (5) years on the (MDS)- UH60.</li><li>U.S. military technical school or specialized training course is desired, certification of education level is required.</li><li>Must be in possession of a Valid U.S. Passport valid for 2 years at the time of hiring and be able to travel internationally.</li><li>Must be able to obtain and maintain facility Public Trust NAC-I. "Note: US Citizenship is required for facility Public Trust NAC-I at this work location".</li><li>Must be able to clear CENTCOM MOD Physicals requirements for deployment training (Will be required to attend CRC (DIDC).</li><li>Must be able to obtain Iraq Visa.</li></ul>

<p><h4>Job description</h4> <p>The UH-60 aircraft mechanic AM-II performs the full range of military tactical aircraft maintenance and maintains, repairs, and troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneumatic and hydraulic systems, engines, auxiliary power unit, and ventilation and heating systems.</p> <p>Remove and install aircraft subsystem assemblies and components such as engines, rotors, transmissions, mechanical flight controls and their components.<br> Service and lubricate aircraft and subsystems.<br> Safely prepare aircraft for inspections and maintenance checks and services.<br> Perform scheduled inspections and assist in performing special inspections.<br> Perform limited maintenance operational checks and diagnose and troubleshoot aircraft systems using special tools and test equipment as required.<br> Use and perform operator maintenance on tools, special tools, and aircraft ground support equipment.<br> Apply comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as aircraft technical manuals, maintenance information and action messages, and all technical guidance provided through government official representatives.<br> Maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components.<br> Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and use required expertise in restoring equipment condition and/or operation.<br> Participate in maintenance test flights and operation checks as required.<br> Perform other duties as requested.</p> <h4>Minimum requirements</h4> <p>High school diploma or equivalent required.<br> Three (3) or more years aviation maintenance experience within the past five (5) years on the (MDS)-UH60.<br> OR FAA A&P license AND two (2) years of aviation maintenance experience within the past five (5) years on the (MDS)-UH60.<br> U.S. military technical school or specialized training course is desired; certification of education level is required.<br> Must be in possession of a valid U.S. passport valid for 2 years at the time of hiring and be able to travel internationally.<br> Must be able to obtain and maintain facility public trust NAC-I. <strong>Note: US citizenship is required for facility public trust NAC-I at this work location.</strong><br> Must be able to clear CENTCOM MOD physical requirements for deployment training (will be required to attend CRC (DIDC)).<br> Must be able to obtain Iraq visa.</p> <h4>Knowledge and skills</h4> <p>Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures, and replacement of parts.<br> Broad knowledge of aircraft sheet metal/structural modifications and repair.<br> Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes, and shears.<br> Working knowledge of technical publications and logistics information systems.<br> Able to prioritize workloads to maintain schedules on assigned projects and may be required to lead teams through more complex aircraft relevant tasks.<br> Participate in maintenance test flights and operation checks as required.<br> Possess the level of experience to inspect all required aeronautical type maintenance to be performed by mechanics.<br> The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.</p> <h4>Physical requirements / working environment</h4> <p>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.<br> Must be able to climb stairs, ramps, ladders, and work stands.<br> Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee, and reach above/below shoulders.<br> May be required to lift heavy objects whose weight may exceed 50 pounds.<br> Must be able to type using a standard keyboard to communicate through e-mail and various software applications.<br> Will handle dirty parts and lubricants.<br> Will be required to wear proper personal protective equipment (PPE).<br> Must be able to pass a respirator physical and fit test.<br> May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.<br> Must be able to lift/push/pull minimum of 50 pounds.<br> May work in maintenance shop or outside.<br> Must be able to work in a shop where the environment is drafty, noisy, and dirty.<br> May be exposed to extreme noise from operating equipment.<br> May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.<br> May be expected to work in austere environments and all-weather conditions.</p></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview ***This position is physically located in Balad, Iraq*** Under the supervision of the Firefighter Crew Chiefs, the Firefighter responds to multiple-types of emergencies operating as a firefighter. Maintains vehicles, equipment, tools, and protective clothing in a serviceable condition. Extinguish fires and takes precautions to prevent fire rekindling. Operates pumps, foam generators, turrets, nozzles, and other firefighting tools and equipment. Exercises caution to avoid personal injury and property damage and comply with strict health and safety standards. At the site of a fire protects and preserves evidence indicating the cause of the fire. Properly wears personal protective clothing. Conducts and take part in frequent reoccurring proficiency training, OJT and maintains required certifications. Performs other duties as assigned. Responsibilities This position description is subject to change at any time as needed to meet the requirements of the program or company. + Participates as a positive team member and understands and conforms to the LOGCAP V contract Performance Work Statement. + Actively participates and maintains a safe workplace, ensuring safety is the highest priority. + Complies with all Environmental, Health, and Safety (EHS) and Quality Assurance (QA) requirements and goals. + Maintains documentation as necessary to meet these requirements. + Ensures emergency equipment is operational and in a state of readiness as required by NFPA or other industry standards. + Maintains and clean personal protective equipment and works as an effective team member in cleaning equipment and facilities. + As part of a team conducts fire inspections, pre-incident planning and ensures that facilities are safe and documentation is recorded and tracked. + Operates computerized digital fire alarm receiving equipment including two-way radio communications equipment. + Performs additional property control and logistical duties in support of fire department operations to include, maintaining accountability of equipment, scheduling maintenance of equipment, coordinating appointments of subordinates, and other administrative duties as needed. + Serves as a team member on a rescue unit, ladder truck, engine company, water tender, or airport ARFF apparatus. + Enters burning or contaminated structures, vehicles, and other immediately dangerous to life and health areas to fight fires and/or perform rescues while wearing required personal protective equipment. + Acts as a crew member for structural fires, aircraft fires, rescue operations, medical emergencies, hazardous materials responses and other emergency events as directed in accordance with process and procedures identified in the department, standard operating procedures. + Performs duties in support of organizational metrics. + Adequately and honestly tracks all data related to metrics. + Provides direct support to the achievement of all metrics related to the LOGCAP V. + Attends meeting in the absence of the supervisor or as needed. + Communicates professionally both orally and in writing with team members and others, as needed, to relay information necessary for job success. + This includes, but is not limited to, performance appraisals, job requirements, division metrics, projects, quality standard procedures, and safety practices. + Performs other duties as required. + This position description is subject to change at any time as needed to meet the requirements of the program or company. Qualifications + Minimum Qualifications: + Education/Certifications: + One-year related experience may be substituted for one year of education, if degree is required. + Must be CAC eligible and/or able to obtain a Common Access Card (CAC) + Must be able to pass annual firefighter Occupations Health Exam and SCBA Fit Testing IAW NFPA 1582 and 1583 + Must be available for recall. + Required to have IFSAC or Pro-Board Certification to these levels: Hazardous Materials Awareness and Operations, Fire Fighter II, Airport Firefighter (ARFF), Driver Operator Pumper and Driver Operator ARFF, Mobile Water Supply, CPR &amp; First Aid Responder and Telecommunicator II. + Experience: + Minimum Five (5) years experience as a Fire Fighter working on a DOD Installation. + OCN Qualifications/Experience Requirements: + Minimum five (5) Years of Fire Fighter Experience working on a DOD installation. + Required to have IFSAC or Pro-Board Certification to these levels: Hazardous Materials Awareness and Operations, Fire Fighter II, Driver Operator Pumper, + Required to have Hazmat Technician Certification + Airport Firefighter certification received with in six months of hire date preferred + Airport Firefighter and ARFF Driver Operator certification required + Must be able to read/write and speak English. + Skills: + Possess the ability to demonstrate firefighter knowledge and skills in a professional manner. + Ability to work effectively with fellow employees and management personnel at all levels to include multinational staff, and military officials. + Strong ability to exercise professional discretion and good judgment and to understand the effect of decisions made. + Exhibit strong interpersonal skills and ability to communicate in English both verbally and writing and must have good computer skills in MS-Word, MS-Excel, and MS- Outlook. + Working Conditions: + Duties will involve the conduct of work in the outdoors with a potential exposure to extreme climatic conditions including frequent dust storms and high temperatures up to 130 degrees in the summer months. + Potential exposure to chemical or biological agents could exist. + Employee use of personal protective equipment (PPE) in certain areas is required. + Such PPE includes but is not limited to head, foot, hand, torso, respiratory, vision, and hearing protective devices. + Must comply with all Fire Department, company, and Army safety policies. + Must be able to respond and work in all types of weather and in less than ideal conditions and may have to enter hazardous environments. + Must be able climb ladders to gain access to upper levels of buildings or to rescue individuals from burning structures or when trapped. + Physical Requirements: + Must meet or exceed physical requirements contained in the current edition NFPA 1582, including but not limited to the physical strength and ability to perform heavy and strenuous tasks for extended periods of time under dangerous and uncomfortable conditions, often while wearing bulky protective gear, including self-contained breathing apparatus. + Must be available for recall and manage personnel issues off duty. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Important Employment Information This role is located in Baghdad and will be hired through a third-party employment provider, as Atlas Copco does not maintain a legal entity or Customer Center in the country. While administrative processes such as contracts and payroll will be handled externally, your day-to-day operations will be fully connected to the Turkiye Customer Center, reporting to the Business Line Manager in Turkiye. Your role As an Area Sales Engineer, your mission is to develop sales and market our products in Baghdat Iraq by leveraging your technical expertise and understanding of customer needs. You will report to the Business Line Manager and work closely with product teams to ensure successful execution of sales strategies. You will: Establish and manage channel partners through the distribution network. Conduct market research and identify opportunities in the assigned region. Generate product requirements and determine regional specifications. Coordinate production timetables, pricing, and plans for product introduction. Develop marketing strategies and manage dealer relationships. Deliver product training and support after-sales activities. Drive sales for Portable Compressors, Handheld Tools, Generators, Pumps, and Light Towers and Aftermarket Products. To succeed, you will need You have: 3+ years of experience working as a Sales Engineer or in a similar technical-commercial role. A university degree in Engineering, Marketing, or Business Management (preferably mechanical, electrical, or industrial engineering) Non-negotiable skills: Strong technical know-how and marketing knowledge. Ability to develop and execute sales strategies, including dealer management and channel development. Fluency in English (written and verbal) and a valid local driving license. Preferred skills: Experience in market research and determining customer needs through data collection and analysis. Ability to recommend product scope, review specifications, and appraise new product ideas or packaging changes. Skilled in competitor analysis and defining product marketing communication objectives. Experience in preparing short- and long-term sales forecasts, special reports, and answering management requests. Ability to manage inventory turnover and product availability through forecasting and production schedule alignment. Expertise in pricing strategies using market research data and cost analysis for customized orders. Familiarity with digitalization tools and platforms for product development, sales, and marketing activities. Strong understanding of product management and value creation principles. Excellent presentation, communication, and relationship-building skills. Advanced computer skills (MS Office) and adaptability to new technologies. Additional responsibilities include: Regular dealer and end-user visits, product training, and after-sales support. Selling and promoting service products (e.g., maintenance parts, kits, lubricants). Building and maintaining strong business relationships with customers and distributors. Maintaining professional and technical knowledge by attending workshops, reviewing publications, and networking. Contributing to team efforts and performing other duties as directed by management. In return, we offer Culture of trust and accountability Lifelong learning and career growth Innovation powered by people Comprehensive compensation and benefits Health and well-being Job location This role is fully remote, enabling you to work from anywhere within the region of Baghdad, while being associated with our customer center in Turkiye.</span> </div>

<h3>Position Title</h3><p>Production Manager</p><h3>Department</h3><p>Production</p><h3>Reports To</h3><p>Plant Manager / General Manager</p><h3>Position Summary</h3><p>The Production Manager is responsible for planning, organizing, directing, and controlling all manufacturing operations to ensure production targets are achieved safely, efficiently, and in compliance with the company's quality, food safety, and operational standards. The role focuses on maximizing productivity, minimizing downtime and waste, optimizing resource utilization, and driving continuous improvement across all production activities.</p><h3>Key Responsibilities</h3><ul><li><p>Plan, organize, and manage all daily production operations to ensure the achievement of production targets.</p></li><li><p>Develop and implement daily, weekly, and monthly production plans in coordination with Sales, Supply Chain, Warehouse, Maintenance, and Quality departments.</p></li><li><p>Ensure production schedules are executed on time while meeting quality, safety, and cost objectives.</p></li><li><p>Supervise all manufacturing and packaging operations across production lines.</p></li><li><p>Monitor production performance, analyze operational data, and implement corrective actions to improve efficiency.</p></li><li><p>Maximize Overall Equipment Effectiveness (OEE) through continuous monitoring and performance improvement initiatives.</p></li><li><p>Identify production bottlenecks and implement solutions to minimize downtime and increase productivity.</p></li><li><p>Coordinate closely with the Maintenance Department to ensure equipment reliability and preventive maintenance execution.</p></li><li><p>Ensure the availability of raw materials and packaging materials to support uninterrupted production.</p></li><li><p>Optimize labor utilization and production resources to maximize operational efficiency.</p></li><li><p>Monitor production costs and implement initiatives to reduce waste and improve cost efficiency.</p></li><li><p>Ensure compliance with Good Manufacturing Practices (GMP), HACCP, ISO 22000, and all food safety and quality standards.</p></li><li><p>Develop, review, and enforce Standard Operating Procedures (SOPs) and work instructions.</p></li><li><p>Lead continuous improvement initiatives using Lean Manufacturing and best manufacturing practices.</p></li><li><p>Analyze production issues using Root Cause Analysis (RCA) and implement Corrective and Preventive Actions (CAPA).</p></li><li><p>Prepare and present daily, weekly, and monthly production performance reports to senior management.</p></li><li><p>Manage production budgets and support cost-saving initiatives.</p></li><li><p>Lead the recruitment, training, coaching, and performance evaluation of production supervisors and operators.</p></li><li><p>Foster a culture of teamwork, accountability, operational excellence, and continuous improvement.</p></li><li><p>Ensure full compliance with Occupational Health &amp; Safety regulations and company policies.</p></li><li><p>Conduct regular production meetings to review performance, address operational challenges, and align production priorities.</p></li><li><p>Participate in the planning, installation, commissioning, and startup of new production lines and manufacturing equipment.</p></li><li><p>Support new product development, process validation, and production trials.</p></li><li><p>Collaborate effectively with cross-functional departments to ensure smooth plant operations.</p></li><li><p>Perform any additional duties assigned by senior management that are related to the role.</p></li></ul><p></p><p><strong>Requirements</strong></p><h1>Job Requirements</h1><h3>Education</h3><ul><li><p>Bachelor's degree in Mechanical Engineering, Industrial Engineering, Production Engineering, Food Engineering, Chemical Engineering, or a related field.</p></li><li><p>A Master's degree in Industrial Management, Operations Management, Business Administration (MBA), or a related discipline is an advantage.</p></li></ul><h3>Experience</h3><ul><li><p>Minimum of <strong>10 years</strong> of experience in a food and beverage manufacturing environment.</p></li><li><p>At least <strong>5 years</strong> of experience in a Production Manager or equivalent leadership role.</p></li><li><p>Proven experience in managing high-speed production and packaging lines.</p></li><li><p>Experience in the production of bottled water, carbonated soft drinks, juices, energy drinks, or dairy beverages is highly preferred.</p></li><li><p>Experience in leading large production teams and managing multi-shift operations.</p></li></ul><h3>Technical Skills</h3><ul><li><p>Strong knowledge of Production Planning and Scheduling.</p></li><li><p>Experience with Lean Manufacturing, Continuous Improvement, and Waste Reduction initiatives.</p></li><li><p>Knowledge of Overall Equipment Effectiveness (OEE) and production performance analysis.</p></li><li><p>Experience in Root Cause Analysis (RCA) and Corrective &amp; Preventive Actions (CAPA).</p></li><li><p>Familiarity with Total Productive Maintenance (TPM) principles.</p></li><li><p>Strong understanding of Good Manufacturing Practices (GMP).</p></li><li><p>Knowledge of HACCP and ISO 22000 Food Safety Management Systems.</p></li><li><p>Experience in production cost control and productivity improvement.</p></li><li><p>Ability to develop and implement Standard Operating Procedures (SOPs).</p></li><li><p>Proficiency in ERP systems (Odoo, SAP, Oracle, Microsoft Dynamics, or similar).</p></li><li><p>Advanced proficiency in Microsoft Office, particularly Microsoft Excel.</p></li></ul><h3>Leadership &amp; Management Skills</h3><ul><li><p>Strong leadership and team management capabilities.</p></li><li><p>Excellent planning, organizing, and decision-making skills.</p></li><li><p>Ability to manage multiple priorities in a fast-paced manufacturing environment.</p></li><li><p>Strong analytical and problem-solving skills.</p></li><li><p>Excellent communication and interpersonal skills.</p></li><li><p>Ability to motivate, coach, and develop production teams.</p></li><li><p>Strong conflict resolution and performance management skills.</p></li><li><p>Results-oriented with a continuous improvement mindset.</p></li></ul><h3>Language Requirements</h3><ul><li><p>Fluent in Arabic.</p></li><li><p>Good command of English (spoken and written).</p></li></ul><h3>Computer Skills</h3><ul><li><p>Microsoft Office Suite (Advanced), especially Excel.</p></li><li><p>ERP Systems.</p></li><li><p>Power BI or other data visualization tools is an advantage.</p></li></ul><h3>Personal Attributes</h3><ul><li><p>High level of integrity and professionalism.</p></li><li><p>Strong sense of responsibility and accountability.</p></li><li><p>Ability to work under pressure and meet tight deadlines.</p></li><li><p>Excellent organizational and time management skills.</p></li><li><p>Adaptability and flexibility in a dynamic manufacturing environment.</p></li><li><p>Commitment to workplace safety, quality, and operational excellence.</p></li></ul><p></p>

<p>We are seeking a skilled and detail-oriented CDP Butchery professional to join our meat processing team in Baghdad, Iraq. In this role, you will be responsible for butchering, processing, and preparing high-quality meat products while maintaining the highest standards of food safety and hygiene. You will work efficiently in a fast-paced environment, utilizing specialized equipment and techniques to deliver consistent, quality results that meet our customers' specifications and expectations.</p><p>Butcher and process meat products using industry-standard tools and techniques with precision and efficiency</p><p>Prepare meat cuts according to customer specifications and quality standards</p><p>Maintain strict food safety and hygiene protocols in compliance with local and international regulations</p><p>Operate and maintain butchery equipment, ensuring all tools are clean, sharp, and properly sanitized</p><p>Manage inventory by monitoring stock levels, rotating products using FIFO (First In, First Out) methods, and minimizing waste</p><p>Organize and maintain a clean, organized workspace that meets health and safety requirements</p><p>Perform quality control checks on all meat products before packaging and distribution</p><p>Follow proper handling and storage procedures for all meat products, particularly in cold storage environments</p><p>Collaborate with team members to meet daily production targets and deadlines</p><p>Report any equipment malfunctions or food safety concerns to management immediately</p><p><strong>Desired Candidate Profile</strong></p><h2>Qualifications</h2><p>Proven experience in butchery, meat processing, or a related food production role</p><p>Strong knowledge of food safety regulations and best practices in meat handling</p><p>Proficiency with butchery tools, equipment, and machinery (saws, grinders, slicers, etc.)</p><p>Solid understanding of different meat grades, cuts, and processing techniques</p><p>Excellent attention to detail and commitment to quality standards</p><p>Physical stamina and dexterity to perform repetitive tasks in a cold environment</p><p>Strong time management and organizational skills</p><p>Ability to work efficiently in a team-oriented environment</p><h2>Preferred</h2><ul><li>Food handling or food safety certification</li><li>Experience with meat grading systems and classification standards</li><li>Supervisory or mentoring experience in a butchery or food production setting</li></ul>

<h2>Mechanical Maintenance Manager</h2><p><strong>Location:</strong> Iraq<br><strong>Industry:</strong> Food Manufacturing – New Pasta Production Plant<br><strong>Department:</strong> Engineering & Maintenance<br><strong>Reports To:</strong> Plant Manager</p><h3>Job Purpose</h3><p>The Mechanical Maintenance Manager is responsible for leading all mechanical maintenance activities to ensure maximum equipment reliability, operational efficiency, and production continuity. The role oversees preventive, predictive, and corrective maintenance programs while supporting the successful commissioning and operation of a new pasta manufacturing facility.</p><h3>Key Responsibilities</h3><ul><li><p>Develop, implement, and continuously improve preventive, predictive, and corrective maintenance programs for all mechanical equipment.</p></li><li><p>Lead, supervise, and develop the mechanical maintenance team to achieve high performance and technical excellence.</p></li><li><p>Support the installation, commissioning, and start-up of new production lines and utility systems.</p></li><li><p>Ensure maximum equipment availability and minimize production downtime.</p></li><li><p>Investigate equipment failures using Root Cause Analysis (RCA) and implement permanent corrective actions.</p></li><li><p>Prepare annual maintenance plans, budgets, and spare parts strategies.</p></li><li><p>Implement and maintain a Computerized Maintenance Management System &#40;CMMS&#41;, where applicable.</p></li><li><p>Coordinate closely with Production, Quality, Utilities, and Warehouse departments to ensure smooth plant operations.</p></li><li><p>Manage critical spare parts inventory and optimize maintenance costs.</p></li><li><p>Supervise contractors, equipment suppliers, and external service providers.</p></li><li><p>Ensure compliance with health, safety, environmental, and food safety standards.</p></li><li><p>Monitor and report key maintenance performance indicators, including:</p><ul><li><p>Equipment Availability</p></li><li><p>Downtime</p></li><li><p>Mean Time to Repair (MTTR)</p></li><li><p>Mean Time Between Failures (MTBF)</p></li><li><p>Maintenance Cost Performance</p></li></ul></li><li><p>Drive continuous improvement initiatives to increase equipment efficiency and reliability.</p></li><li><p>Ensure all maintenance documentation, SOPs, and technical records are accurate and up to date.</p></li></ul><p></p><p><strong>Requirements</strong></p><h3>Qualifications</h3><ul><li><p>Bachelor's degree in Mechanical Engineering or a related discipline.</p></li><li><p>Minimum of 8–10 years of experience in mechanical maintenance within a manufacturing environment.</p></li><li><p>At least 3–5 years of experience in a maintenance leadership or managerial role.</p></li><li><p>Previous experience in food manufacturing is highly preferred, particularly in pasta, flour milling, bakery, or similar processing industries.</p></li></ul><h3>Preferred Experience</h3><ul><li><p>Hands-on experience with <strong>Anselmo</strong> pasta production lines is highly preferred.</p></li><li><p>Experience with Italian pasta processing equipment manufacturers such as Pavan, Fava, Braibanti, or equivalent is an advantage.</p></li><li><p>Strong knowledge of pasta processing equipment including mixers, presses, dryers, conveyors, packaging machines, and related auxiliary systems.</p></li><li><p>Experience in the commissioning and start-up of new manufacturing facilities is highly desirable.</p></li></ul><p></p>