Purchasing specialist Jobs in Iraq

<p>Under broad direction, as a subject matter expert: Performs preventive/predictive maintenance and repair of a variety of mechanical equipment relative to their assigned location. Assists in supervising other technicians and prioritizes and/or assigns work when needed. Possesses advanced diagnostic/troubleshooting knowledge and skills. Performs advanced function testing to verify equipment readiness after maintenance. Must be proficient in understanding/interpreting mechanical schematics/drawings/prints. Ability to identify correct parts and locate them in a system search to enable accurate procurement of spares. Ensures adherence, accurate input, and maintenance of data into Halliburton's system of record. This role is responsible for following specific and detailed work processes within the Halliburton Management System (HMS) during daily job activities. Responsible for mentoring junior technicians. Responsible for ensuring duties are performed in a safe, efficient, and effective manner. Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations. Consequences of error are easily measured and can be confined. Additional Role Responsibilities: (1). Provide the professional technical Support for Rotating equipment and facilities operation and maintenance services; (2). Maintenance, support and troubleshooting of vibration, lubrication, controls applications / systems of equipment; (3). Mechanical support of manufacturing units across the facility; (4). Responsible of the training and technical development of the Mechanical Maintenance organization; (5). Responsible for the development and control the annual budget for the Mechanical Maintenance organization; (6). Routinely analyze and report expenditures to ensure budget compliance; (7). Participate and advise in developing plans for major shutdowns, construction or alteration projects where mechanical inspections will be critical to the accomplishment of the work; (8). Become personally involved in all repairs during shutdowns to insure a trouble-free start-up. Assume responsible role in start-up of all major rotating equipment after shutdown.</p><p><strong>Desired Candidate Profile</strong></p><p>A high school diploma or equivalent and 5 years of experience in related mechanical fields are required. A technical school certification is preferred. Preferred Experience: Minimum of 10-years relevant experience in their discipline or in an operations environment within the oil &amp; gas industry.</p>

<p>The Construction Manager is responsible for the complete administration and organization of construction and field personnel and directs the field effort through the activities of his staff. He reports directly to the Project Manager. Contributes to Construction Safety by reducing site exposure through modularization, standardization and maximizing off plot construction. Contributes in the development of brownfield construction strategies and planning initiatives for project opportunities pre FID. Focusses on addressing and removing hurdles to efficient construction and actively monitors productivity on site, advising (acting on behalf of) the construction manager of ways to improve the productivity metrics. Identifies and monitors brownfield construction planning initiatives for approved projects post FID. Will input into enhancing the design, contracting strategy and execution planning all in consideration of constructability through input into HSE, cost, schedule and quality. Acts as the Construction interface from the point of project inception to the point the project starts field execution. Ability to effectively work on more than one project at a time. Accountabilities/ Expectations : Coordinate with Project Engineer and EPCM Construction Management Team to bring a coordinated approach to the overall project scope, quality, cost and schedule expectations. Ensure that planning of the project deliverables from Engineering and Contracts &amp; Procurement is line with the construction sequence and further to the hand over sequence. Ensures designs make optimal use of cold work, modularization and off plots construction to minimize HSSE exposure on site.</p><p><strong>Desired Candidate Profile</strong></p><p>Skills are typically acquired through completion of an undergraduate degree in architecture, engineering, or business administration, preferred Engineering branches., i.e. Mechanical, Civil, electrical, chemical, or equivalent. 5 years of experience in project management which includes experience in facility construction or remodeling and management experience. Preferred Experience: Minimum 15 years experience in Oil and Gas related project Design and Engineering Minimum 10 years experience in Oil and Gas Project Delivery as a Umbrella Contract Construction Manager function in a discipline Workforce Experience in Productivity measurement resource based planning (Level 4 Scheduling) Strong Managerership and teambuilding skills Supervisory experience</p>

<p>This role involves supervising junior staff, ensuring high standards of food preparation and presentation, and maintaining consistency in quality and hygiene. The Chef de Partie plays a key role in supporting the Sous Chef and Executive Sous Chef in daily operations and culinary excellence.. Run the day to day operation of any area of the hot kitchen in the absence of Chef de Cuisine or sous Chef on duty. Taste and season the food appropriately and to ensure it is well presented and of the standard and quality required before serving it to the guest. train and develop junior chefs. Communicate and pass on information and confirm the comprehension of information (conduct kitchen briefings) with staff and ensure a smooth uninterrupted operation and service to our guests Discipline and ensure the quality of employee's work in the absence of a senior Chef. The ability to act as a liaison between the Executive Chef, Executive Sous Chef and other senior Chefs and the line employees. Prepare stocks and sauces, meats and seafood s using traditional Western Food Techniques To report in the kitchen at your station at scheduled times regardless of beginning of shift or returning from meal break Utilize information on forecasts and reports to enable the planning of a smooth uninterrupted operation and service our guests; i.e. food production, purchasing &amp; manpower planning. Make requisitions of all items needed for the next day, with the assistance of the Chef de Cuisine or sous chef on duty. Prioritise, plan and organise your and your teams daily tasks in order to ensure on time delivery as required The ability to follow instruction and work closely with the senior chef, Sous Chef and Executive sous Chef.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Previous experience in a similar role.</li><li>Understanding food safety, sanitation, and hygiene standards.</li><li>Ability to supervise, train, and motivate kitchen staff.</li><li>Ability to work efficiently in a fast-paced environment.</li><li>Strong attention to detail and commitment to food quality and presentation.</li></ul>

<p>What you will be doing: This role involves supervising junior staff, ensuring high standards of food preparation and presentation, and maintaining consistency in quality and hygiene. The Chef de Partie plays a key role in supporting the Sous Chef and Executive Sous Chef in daily operations and culinary excellence.. Run the day to day operation of any area of the hot kitchen in the absence of Chef de Cuisine or sous Chef on duty. Taste and season the food appropriately and to ensure it is well presented and of the standard and quality required before serving it to the guest. train and develop junior chefs. Communicate and pass on information and confirm the comprehension of information (conduct kitchen briefings) with staff and ensure a smooth uninterrupted operation and service to our guests Discipline and ensure the quality of employee's work in the absence of a senior Chef. The ability to act as a liaison between the Executive Chef, Executive Sous Chef and other senior Chefs and the line employees. Prepare stocks and sauces, meats and seafood s using traditional Western Food Techniques To report in the kitchen at your station at scheduled times regardless of beginning of shift or returning from meal break Utilize information on forecasts and reports to enable the planning of a smooth uninterrupted operation and service our guests; i.e. food production, purchasing &amp; manpower planning. Make requisitions of all items needed for the next day, with the assistance of the Chef de Cuisine or sous chef on duty. Prioritise, plan and organise your and your teams daily tasks in order to ensure on time delivery as required The ability to follow instruction and work closely with the senior chef, Sous Chef and Executive sous Chef.</p><p><strong>Desired Candidate Profile</strong></p><p>Previous experience in a similar role. Understanding food safety, sanitation, and hygiene standards. Ability to supervise, train, and motivate kitchen staff. Ability to work efficiently in a fast-paced environment. Strong attention to detail and commitment to food quality and presentation.</p>

<p><b>How can you make a difference?</b></p><p><br></p><p>Reporting to the Representative, the Advocacy and Communications Specialist leads the Advocacy and Communication section at UNICEF Iraq and supervises two roles: Communication Officer (NO-2) and Communication Associate (GS-6).</p><p><br></p><p>The Advocacy and Communication Specialist is accountable for coordinating, networking, implementing and monitoring public advocacy strategies and associated products and activities on an on-going basis with public audiences with the objective of promoting awareness, understanding, support and respect for children’s and women’s rights, and support for UNICEF's mission, geared towards achieving advocacy impact in alignment with programme outcomes and overall advocacy and communication priorities in the country office, and in a coordinated manner with regional and global communication and advocacy priorities.</p><p><br></p><p>Summary of key functions/accountabilities:&nbsp;</p><p><br></p><p>Public advocacy strategy&nbsp;</p><p>Communication and media relations&nbsp;</p><p>Networking&nbsp;</p><p>Global priorities and campaigns</p><p>DRR and Humanitarian Advocacy</p><p>Monitoring and evaluation</p><p>Team management&nbsp;</p><p>Capacity building</p><p>Stakeholder engagement</p><p>Others</p><p>If you would like to know more about this position, please review the complete Job Description here:Download File Classified JD _ Advocacy and Communications, NO-3, Baghdad, #136367.pdf</p><p><br></p><p>To qualify as an advocate for every child you will have…&nbsp;</p><p><br></p><p>Minimum requirements</p><p>Education: Master or equivalent (Advanced University Degree) in Communications,Journalism,Public Relations/Communication,Marketing,Social Science and any other related fields.</p><p>Work Experience: At least 5 years of relevant work experience in Communication,Media,International Development,Humanitarian Assistance, Advocacy. and any other related fields.</p><p>Skills: Supervision, Communication, Media Relations, International developement, Strategical thinking.</p><p>Language Requirements : English - Proficient/Fluent,Arabic - Proficient/Fluent</p><p>Desirables</p><p>Language: Knowledge of another official UN language (Chinese, French, Russian or Spanish) or a local language</p><p>Emergency, Advocacy strategy development, Networking, Build communication alliances, Media engagement plan, UN or INGO experience</p><p>Relevant experience at country level, particularly in development, fragile settings and humanitarian contexts.&nbsp;</p><p>For every Child, you demonstrate...</p><p><br></p><p>UNICEF's Core Values of Care, Respect, Integrity, Trust and Accountability and Sustainability (CRITAS) underpin everything we do and how we do it. Get acquainted with Our Values Charter: UNICEF Values</p><p><br></p><p>UNICEF competencies required for this post are…</p><p><br></p><p>(1) Builds and maintains partnerships</p><p>(2) Demonstrates self-awareness and ethical awareness</p><p>(3) Drive to achieve results for impact</p><p>(4) Innovates and embraces change</p><p>(5) Manages ambiguity and complexity</p><p>(6) Thinks and acts strategically</p><p>(7) Works collaboratively with others</p><p>(8) Nurtures, leads and manages people</p><p><strong>Desired Candidate Profile</strong></p><p>Master or equivalent (Advanced University Degree) in Communications,Journalism,Public Relations/Communication,Marketing,Social Science and any other related fields.</p><p>At least 5 years of relevant work experience in Communication,Media,International Development,Humanitarian Assistance, Advocacy. and any other related fields.</p><p>Skills : Supervision, Communication, Media Relations, International developement, Strategical thinking.</p><p>English - Proficient/Fluent,Arabic - Proficient/Fluent</p><p>Desirables</p><p>Language: Knowledge of another official UN language (Chinese, French, Russian or Spanish) or a local language</p><p>Emergency, Advocacy strategy development, Networking, Build communication alliances, Media engagement plan, UN or INGO experience</p><p>Relevant experience at country level, particularly in development, fragile settings and humanitarian contexts.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>E&amp;I Engineer<br><br>E&amp;I EngineerECSS30 - Sr. Specialist, Commissioning<br><p>KBR Sustainable Technology Solutions (STS) provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design capabilities, and smart solutions to optimize planned and operating assets.</p><br><br><br><p>Responsible for start-up and plant operations activities including equipment and system checkout, inspection for proper installation, review for correct design, and calculation of expected system and equipment operating parameters under temporary start-up conditions. Coordinates start-up operations, including the direction of craft, and all other start-up activities such as flushing, chemical cleaning, and initial equipment and system operation. Coordinates performance tests and calculates test results and heat balances. Performs calculations required to properly evaluate design changes, provides engineering reports for the engineering department to assist in design change preparation. Works with client at the site. Under general supervision, performs all conventional aspects of the functional area subject matter. Devises new approaches to problems encountered. Plans, schedules, and conducts work requiring judgment in the independent evaluation, selection, and adaptation of engineering techniques, procedures, and criteria. Performs work which involves conventional engineering practice but may include a variety of complex features such as conflicting design requirements, unsuitability of conventional materials, and difficult coordination requirements. Provides technical guidance to designers and less experienced engineers. Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations. Skills are typically acquired through an undergraduate degree in Engineering and a minimum of 10 years related experience, with average experience ranging from 10-15 years.</p><br><br><br><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Wood is recruiting for an Electrical &amp; Instrument Supervisor ((Iraqi National) to join its Iraq business unit focusing on receiving and verifying all electrical equipment, ensuring conformity to project specifications and&nbsp;<br> standards.</p><br><p>This role is a full-time on-site role in Basra, Iraq with travel requirement.<br> &nbsp;</p><br><br> Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy &amp; Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com<br> <b>Diversity Statement&nbsp;</b><br> We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.<br><br>Responsibilities:<br><p>Wood is recruiting for an Electrical &amp; Instrument Supervisor ((Iraqi National) to join its Iraq business unit focusing on receiving and verifying all electrical equipment, ensuring conformity to project specifications and&nbsp;<br> standards.</p><br><p>This role is a full-time on-site role in Basra, Iraq with travel requirement.<br><i><strong>#Wood #Iraq #Basra #Electrical &amp; Instrument Supervisor</strong></i></p><br><p><strong><u>The role</u></strong></p><br><p>This is an exciting opportunity for an experienced&nbsp;Electrical &amp; Instrument Supervisor&nbsp;to join our Iraq Business Unit.</p><br><p><strong>Our Clients and Projects&nbsp;</strong></p><br><p><strong>Designing the future. Transforming the world.&nbsp;</strong></p><br><p>This Project aims to take over the existing asset and maximize the production in 2 phases. This is a fast-track project and schedule-oriented Design to enhance the production.&nbsp;</p><br><p>The Phase 1 will restore, upgrade, and develop the current plant (CPF1) including: Restoration of initial CPF1 capacity; building a new export pipeline (24”, ~30km); restoration of CPF1 integrity and operability; flaring elimination and released water; development of new flowlines, pads, and electrification network for approximately 30 new wells; debottlenecking of the plant; upgrade of the Safety and Security facilities.&nbsp;</p><br><p>Our scope is to provide Engineering, Procurement services and Construction assistance (EPsCa) for the initial development phase of the field in Southern Iraq. The scope of services includes FEED, detailed design, procurement support, and construction and commissioning assistance.</p><br><p><strong><u>What we can offer</u></strong></p><br><ul> <li><strong>Meaningful and interesting projects</strong> Delivered to high profile clients and complex projects in Iraq&nbsp;</li> <li><strong>Commitment to Diversity and Inclusion</strong>; we are an organisation actively committed to diversity and inclusion across our business with employee networks committed to giving all employees a voice&nbsp;</li> <li><strong>Competitive salary</strong> with regular salary reviews to ensure we are rewarding at the right level in line with the market&nbsp;</li> <li><strong>Medical Insurance:&nbsp;</strong>Ensures inpatient and outpatient medical care is available should you require treatment.&nbsp;</li> <li><strong>Commitment to continued professional development;</strong> development plans that are tailored to your individual needs and interests&nbsp;</li> <li><strong>Global connections</strong>: join experts around the world who are at the leading edge of our industry, shaping the standards of our profession&nbsp;</li> <li><strong>Long Service Award:&nbsp;</strong>Wood values the commitment and loyalty of our people. Celebrating Long Service provides an opportunity for the business to demonstrate their appreciation of the hard work, dedication and many years’ services of our employees at 5-year service milestones&nbsp;</li></ul><p><strong><u>Job Objectives:</u></strong></p><br><ul> <li>Receive and verify all electrical equipment, ensuring conformity to project specifications and standards.</li> <li>Coordinate and schedule equipment deliveries to the site, planning and managing logistics for all electrical equipment.&nbsp;</li> <li>Develop and implement preservation plans for electrical equipment on-site, ensuring proper maintenance until installation.&nbsp;</li> <li>Supervise the installation of all electrical equipment.&nbsp;</li> <li>Coordinate with other disciplines to ensure site readiness, including foundation preparation and electrical interfaces.&nbsp;</li> <li>Be proactive in addressing potential issues and ensuring smooth installation processes.&nbsp;</li> <li>Implement and oversee QA/QC procedures during equipment installation, conducting inspections to ensure compliance with quality standards.&nbsp;</li> <li>Manage and coordinate electrical construction activities, resolving any on-site technical issues.&nbsp;</li> <li>Assist in pre-commissioning and commissioning of electrical systems, ensuring all systems meet performance criteria.&nbsp;</li> <li>Prepare and manage the hand-over of electrical systems, ensuring all documentation is complete and accurate.&nbsp;</li> <li>Interface between interdisciplinary departments and within international teams, ensuring seamless integration of electrical systems&nbsp;</li> <li>Maintain and update technical documentation, including technical reports and specifications.&nbsp;</li> <li>Troubleshoot and resolve electrical issues, providing technical support as needed.&nbsp;</li> <li>Monitor a team of contractor’s electrical technicians, providing guidance and training as necessary.&nbsp;</li> <li>Monitor and control project costs related to electrical work, identifying, and implementing cost-saving measures.</li> <li>Develop and manage electrical work schedules, ensuring timely completion of all electrical activities.&nbsp;</li> <li>Assist in the procurement of electrical equipment and materials, reviewing vendor documentation for compliance.</li> <li>Identify and mitigate risks related to electrical activities, implementing contingency plans as necessary.&nbsp;</li> <li>Manage changes to electrical systems and documentation, evaluating and approving change requests.</li></ul><br>Qualifications:<br><p><strong>What makes you remarkable?&nbsp;</strong></p><br><p>At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world’s most critical challenges.&nbsp;&nbsp;</p><br><p><strong>Expected:</strong></p><br><ul> <li>Bachelor’s degree in electrical engineering, 5 to 10 years of experience in the oil industry, with significant experience with SIMOPS works,</li> <li>Strong understanding of Oil &amp; Gas International Codes and Standards,</li> <li>Proactive and team-oriented approach with the ability to work collaboratively across complex project teams. Strong technical and problem-solving skills,</li> <li>Excellent communication and interpersonal skills,</li> <li>Ability to work effectively under pressure, Detail-oriented with strong organizational skills.</li></ul> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Wood is recruiting for a Punch List Coordinator to join its Iraq business unit focusing on ensuring the completions database development and set-up with systemization, punch-list raising and clearing.</p><br><p>This role is a full-time on-site role in Basra, Iraq with travel requirement.</p><br><br> Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy &amp; Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com<br> <b>Diversity Statement&nbsp;</b><br> We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.<br><br>Responsibilities:<br><p>Wood is recruiting for a Punch List Coordinator to join its Iraq business unit focusing on ensuring the completions database development and set-up with systemization, punch-list raising and clearing.</p><br><p>This role is a full-time on-site role in Basra, Iraq with travel requirement.</p><br><p><i><strong>#Wood #Iraq #Basra #Punch List Coordinator</strong></i></p><br><p><strong><u>The role</u></strong></p><br><p>This is an exciting opportunity for an experienced&nbsp;Punch List Coordinator&nbsp;to join our Iraq Business Unit.</p><br><p><strong>Our Clients and Projects&nbsp;</strong></p><br><p><strong>Designing the future. Transforming the world.&nbsp;</strong></p><br><p>This Project aims to take over the existing asset and maximize the production in 2 phases. This is a fast-track project and schedule-oriented Design to enhance the production.&nbsp;</p><br><p>The Phase 1 will restore, upgrade, and develop the current plant (CPF1) including: Restoration of initial CPF1 capacity; building a new export pipeline (24”, ~30km); restoration of CPF1 integrity and operability; flaring elimination and released water; development of new flowlines, pads, and electrification network for approximately 30 new wells; debottlenecking of the plant; upgrade of the Safety and Security facilities.&nbsp;</p><br><p>Our scope is to provide Engineering, Procurement services and Construction assistance (EPsCa) for the initial development phase of the field in Southern Iraq. The scope of services includes FEED, detailed design, procurement support, and construction and commissioning assistance.</p><br><p><strong><u>What we can offer</u></strong></p><br><ul> <li><strong>Meaningful and interesting projects</strong> Delivered to high profile clients and complex projects in Iraq&nbsp;</li> <li><strong>Commitment to Diversity and Inclusion</strong>; we are an organisation actively committed to diversity and inclusion across our business with employee networks committed to giving all employees a voice&nbsp;</li> <li><strong>Competitive salary</strong> with regular salary reviews to ensure we are rewarding at the right level in line with the market&nbsp;</li> <li><strong>Medical Insurance:&nbsp;</strong>Ensures inpatient and outpatient medical care is available should you require treatment.&nbsp;</li> <li><strong>Commitment to continued professional development;</strong> development plans that are tailored to your individual needs and interests&nbsp;</li> <li><strong>Global connections</strong>: join experts around the world who are at the leading edge of our industry, shaping the standards of our profession&nbsp;</li> <li><strong>Long Service Award:&nbsp;</strong>Wood values the commitment and loyalty of our people. Celebrating Long Service provides an opportunity for the business to demonstrate their appreciation of the hard work, dedication and many years’ services of our employees at 5-year service milestones&nbsp;</li></ul><p><strong><u>Job Objectives:</u></strong></p><br><ul> <li><span>To adopt &amp; demonstrate an exemplary behavior with regard to HSSE requirements.</span></li> <li><span>To adopt and demonstrate an exemplary behavior with regard to the Company Ethics and “Code of Conduct” policy and to promote and enforce the Corporate Anti-Corruption Program within the project team.</span></li> <li><span>To ensure that latest digital and carbon footprint reduction initiatives are studied and implemented if possible.</span></li> <li><span>To ensures the completions database development and set-up with systemization, punch-list raising and clearing.</span></li> <li><span>&nbsp;To walkdown coordination, allocation and closure of check sheets A, B and C, and Coordination with other stakeholder disciplines to develop the completions database and Handover Dossiers.&nbsp;</span></li> <li><span>To provides clear guidance to the EPC contractor and facilitates resolution of completions issues to meet Project objectives and milestones.</span></li> <li><span>To provides Weekly report with forecast of the Punch List closure.</span></li> <li><span>To support the completion, ICAPS Pre-commissioning, commissioning and Start Up activities.</span></li> <li><span>To ensure the ICAPS network is always available.</span></li> <li><span>To oversight Contractor on completion, pre-commissioning, and commissioning activities.</span></li> <li><span>To support the establishment of specific mechanical completion, pre-commissioning and commissioning/start-up progress reporting tools and indicators.</span></li> <li><span>To develop / prepare and follow-up the mechanical completion and commissioning/start-up dossiers to COMPANY.</span></li> <li><span>To follow the Contractor's Pre-Com &amp; commissioning activities as per OPERCOM using ICAPS software.</span></li> <li><span>To Track, report of all pre-commissioning / commissioning activities and the receipt and review of all Completion dossiers Ready for Commissioning and Achievement of Commissioning.</span></li> <li><span>To report the progress of Punch List closure with highlight of risk of schedule slippage.</span></li></ul><br>Qualifications:<br><p><strong>What makes you remarkable?&nbsp;</strong></p><br><p>At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world’s most critical challenges.&nbsp;&nbsp;</p><br><p><strong>Expected:</strong></p><br><p><span><strong>Professional Experience (years):</strong> &gt;20 years in Oil and Gas projects</span></p><br><p><span><strong>Experience in similar position (years): </strong>At least 3 years of experience in similar position during project, relevant site experience in an onshore field and 10 years as Commissioning Manager is required. Experience as Production Manager, Site Manager or equivalent is also required to meet the Filed Operation aspects of this position.</span></p><br><ul> <li><span>Knowledgeable of TOTAL rules and specifications</span></li> <li><span>Knowledgeable of OPERCOM and ICAPS</span></li> <li><span>Knowledgeable of Crystal Report and SQL Server installation</span></li> <li><span>Good communication skills and fluency in English</span></li> <li><span>Good interpersonal and diplomatic skills</span></li></ul><p><span><strong>Level / Diploma:</strong> Engineer</span></p><br><p><span><strong>Languages: </strong>English mandatory</span></p><br><p><span>The position will be based in Basra (Iraq) on rotational basis (4 weeks On/4 weeks Off)</span></p><br> </div>

<p>Performs preventive/predictive maintenance and repair of a variety of mechanical equipment relative to their assigned location. Assists in supervising other technicians and prioritizes and/or assigns work when needed. Possesses advanced diagnostic/troubleshooting knowledge and skills. Performs advanced function testing to verify equipment readiness after maintenance. Must be proficient in understanding/interpreting mechanical schematics/drawings/prints. Ability to identify correct parts and locate them in a system search to enable accurate procurement of spares. Ensures adherence, accurate input, and maintenance of data into Halliburton's system of record. This role is responsible for following specific and detailed work processes within the Halliburton Management System (HMS) during daily job activities. Responsible for mentoring junior technicians. Responsible for ensuring duties are performed in a safe, efficient, and effective manner. Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations. Consequences of error are easily measured and can be confined.</p><p>Additional Role Responsibilities: (1). Provide the professional technical Support for static equipment and facilities operation and maintenance services; (2). Conducts detailed technical evaluations to address issues with equipment and system design, operation and maintenance; (3). Provides pertinent engineering expertise to Root Cause Failure Analysis; (4).Review and approval of mechanical data sheets of static equipment (5).Reviews affiliate, project and contractor deliverables as requested to ensure compliance with project specifications, Design Practices, Static Equipment Toolkit guidance, and best practices. Documents to be reviewed may include Piping &amp; Instrument Diagrams, equipment arrangements, equipment specifications, data sheets, vendor proposals, and technical studies; (6).Participates in design reviews, risk assessments, HAZOPs, vendor qualification, and vendor bid evaluations as requested; (7).Supports functional initiatives and maintains discipline documentation pertinent to Upstream Facilities; (8).Provides technical mentorship to less experienced engineers with emphasis on areas of identified skill gaps; (9).Proactively and continuously grows disciplines technical expertise in pertinent technologies. (10).Maintains current knowledge (e.g. through participation in industry conferences / forums).</p><p><strong>Desired Candidate Profile</strong></p><p>A high school diploma or equivalent and 5 years of experience in related mechanical fields are required. A technical school certification is preferred. Preferred Experience: Minimum of 10-years relevant experience in their discipline or in an operations environment within the oil &amp; gas industry.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are seeking a Head of Contracts Management who will lead contract management strategy and governance across the organization.</p><ul><li>Lead contract management strategy, governance, and the full contract lifecycle.</li><li>Manage high-value negotiations, contract awards, amendments, claims, and disputes.</li><li>Ensure compliance with legal, regulatory, contractual, and company requirements.</li><li>Advise stakeholders on contractual risks, opportunities, and commercial matters.</li><li>Drive cost optimization, value creation, and continuous performance improvement.</li><li>Manage relationships with key suppliers, partners, contractors, and authorities.</li><li>Lead and develop a high-performing contract management team.</li><li>Ensure HSE requirements, confidentiality, and risk management are integrated into all contractual activities.</li></ul><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Requirements</p><ul><li>Master’s degree in Law, Engineering, Business, or an equivalent field</li><li>Minimum 15 years of experience in contract management</li><li>Strong expertise in contract management, procurement, and legal frameworks</li><li>Proven experience managing complex industrial contracts and project environments</li><li>Strong ability to manage risks, claims, and disputes</li><li>Excellent negotiation and influencing skills</li><li>Ability to manage complex stakeholder environments</li><li>Strong leadership and team development capabilities</li><li>Experience in multinational organizations or large-scale project environments</li><li>Strong knowledge of international contracting standards</li><li>Fluent in English and Arabic (mandatory)</li><li>French is an advantage</li></ul><p><br></p></div>

<p>The primary responsibility of the Steam/Gas Mechanic is to safely accomplish the installation, maintenance and repair of the heavy rotating machinery used mainly in power generation applications. Turbine Mechanics work closely with Supervisors, EHS personnel, and the Operations Department to achieve these goals. You may be assigned other duties to help proactively drive our FieldCore vision and align with our organization s core values.</p><p>Essential Duties &amp; Responsibilities:</p><ul><li>Dismantle, assemble, move and align, machinery and equipment using: hoists, cranes, chain falls, hand tools, power tools, pneumatic and hydraulic tools, micrometers, rules, squares, plumb bobs, dial indicators and/or laser alignment equipment</li><li>Read blueprints, schematic drawings and technical documentation to determine proper work procedures</li><li>Responsible for shipping and receiving all major pieces for T&amp;DC, plus all shipping, receiving, inventory, and control of tools, equipment and supplies</li><li>Perform material and machine inspections using precision measuring equipment such as micrometers, rules, calipers, protractors, and torque wrenches</li><li>Perform machining and welding operations for making various parts for lab and shop training equipment</li><li>Determine equipment specifications and prepare parts lists for purchasing, consisting of mechanical, electrical, and hydraulic devices as needed to complete assigned projects</li><li>Load, transport, and unload materials, tools, equipment and supplies and perform mechanical and electrical maintenance and repairs as needed</li><li>Read blueprints, schematic drawings and technical documentation to determine proper work procedures</li><li>Install machinery and equipment according to layout plans, blueprints and other drawings in industrial establishments</li><li>Ability and willingness to work holidays, weekends and overtime as required by field assignments.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Minimum of one (1) years experience maintaining, dismantling, and installing machinery and industrial service equipment including various pumps, motors, fans, generators, and turbines</li><li>Valid Driver s License</li></ul><p>Preferred:</p><ul><li>Degree/Associate Degree in Technical Field or Gas Turbine Systems</li></ul><p>Desired Characteristics:</p><ul><li>Ability to disassemble and reassemble complex rotating equipment</li><li>Bolting, Hydraulic Bolting, Flange Management, Small Bore Piping, Basic Rigging/Lifting, O/H Crane Operator</li><li>Proficient in the following: mechanical/technical skills, oral communications skills, Critical Thinking</li><li>Manage time-sensitive tasks and maintain a schedule within operationally challenging environments.</li><li>Must work well both independently and in a team environment.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are seeking a Site Logistics Coordinator who will ensure the use of the company HSE standards (Company Rules, General Specifications, Guides &amp; Manuals) throughout his activities, for the Lifting, excavation and the Road Transport in particular - Organise Tool Box talks with Contractors, stand downs sessions after incidents.</p><ul><li>Coordinate equipment and material transfers within the Ratawi field, Logistics Base, project locations, BOC yards, contractors' yards, and other destinations.</li><li>Participate in Road Safety campaigns organized by the Affiliate Road Safety Coordinator.</li><li>Assist the Site Lifting Specialist (SLS) with lifting operations, including preparation and coordination with other entities.</li><li>Coordinate transportation and lifting resources on site.</li><li>Follow up on Life Support contract KPIs and statistics, coordinate interfaces with the Camp Boss, and report to RSES.</li><li>Ensure high-quality and hygiene standards for Catering Services.</li><li>Follow up on improvement action plans for the Site Catering contract.</li><li>Organize spot audits and inspections of the Site Catering contract.</li><li>Monitor chemical storage activities from an HSE perspective, including Safety Data Sheet updates and training of forklift operators and truck drivers.</li><li>Interface with the Logistics team regarding logistics purchases.</li><li>Participate in the watchkeeping team during Full Field Shutdowns, providing day and night support according to the roster.</li><li>Coordinate Logistics topics with Drilling, RFM, and Projects entities.</li><li>Participate in site surveys at the CPF, wellpads, and project sites.</li><li>Report activities and statistics for tasks under his management.</li><li>Support GGIP Project Logistics activities, including personnel and equipment transportation and diesel deliveries.</li></ul><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Requirements</p><ul><li>3 years of experience in the Oil &amp; Gas sector</li><li>Bachelor’s degree, preferably in Computer Science or Languages</li><li>Field experience in personnel transportation</li><li>Experience in Health, Safety &amp; Environment (HSE) is a plus</li><li>Excellent proficiency in Microsoft Office Suite (Excel, Word, PowerPoint)</li><li>Fluent in English; French is a plus</li></ul><p><br></p></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Field Service Engineer - Mechanical Heavy-Duty Gas Turbine</b><br>&nbsp;</p><br><p><b>Are you a Field Specialist looking for a new opportunity?</b><br>&nbsp;</p><br><p><b>Do you like working in collaborative teams and solving critical issues?</b><br>&nbsp;</p><br><p><b>Join our Industrial and Energy Technology</b> <b>Team!</b></p><br><p>Our Industrial and Energy Technology (IET) operates across 120 countries and serves the entire energy value chain and industrial sector. We hold an extensive portfolio of rotating equipment, process flow, transmission technology and lifecycle services. Our Engineering Transformation team work to improve the quality of our Engineering processes.</p><br><p><b>Partner with the best</b><br>Coordinates and oversees work at a field site, providing quality service to the customer. Job roles may include sales, job design, execution, and follow-up activities. Provides the planning necessary for the job, including instructions to the crew and equipment used.<br>&nbsp;</p><br><p>As a Field Service Engineer, you will be responsible for:</p><br><ul><li><p>Performing minor/major maintenance of equipment following the TPS Service Site Quality Check Lists and procedures.</p><br></li><li><p>Providing records of all activities accomplished at the Customer Site to the TPS Supervisor promotes and maintains relations.</p><br></li><li><p>Executing all required responsibilities safely by following all TPS Service applicable processes and procedures.</p><br></li><li><p>Providing significant troubleshooting support on the equipment under maintenance and/or installation in the Field.</p><br></li></ul><p><br><b>Fuel your passion</b><br>To be successful in this role, you will:</p><br><ul><li><p>Have a Bachelor's degree OR Full-time Diploma in Mechanical Engineering.</p><br></li><li><p>Have experience of a minimum of 5 years in the Oil &amp; Gas industry within maintenance or installation field activities.</p><br></li><li><p>Have knowledge of rotating equipment, Installation, commissioning, startup, and maintenance of Heavy-Duty Gas Turbines (Frame 5/2, Frame 3, Frame 6B, Frame 7FA) and their Auxiliaries.</p><br></li><li><p>Be specialized in Heavy Duty Gas Turbine Products.</p><br></li><li><p>Have industry experience and TPS product line training, as required</p><br></li><li><p>Have acquired expertise in more than one TPS rotating Equipment product.</p><br></li></ul><p><br><b>Work in a way that works for you</b><br>We recognize that everyone is different and that the way in which people want to work and deliver at their best is different for everyone too. In this role, we can offer the following flexible working patterns:</p><br><ul><li><p>This role is working with our customers on-site in locations across the world. When onsite, you will have the flexibility to work in line with customer working patterns. When projects are complete, we offer you the opportunity to take extended leave before you take on your next project.</p><br></li></ul><p><br><b>Working with us</b><br>Our people are at the heart of what we do at Baker Hughes. We know we are better when all of our people are developed, engaged and able to bring their whole authentic selves to work. We invest in the health and well-being of our workforce, train and reward talent and develop leaders at all levels to bring out the best in each other.<br>&nbsp;</p><br><p><b>Working for you</b><br>Our inventions have revolutionized energy for over a century. But to keep going forward tomorrow, we know we have to push the boundaries today. We prioritize rewarding those who embrace change with a package that reflects how much we value their input. Join us, and you can expect:<br>&nbsp;</p><br><ul><li><p>Contemporary work-life balance policies and well-being activities</p><br></li><li><p>Comprehensive private medical care options</p><br></li><li><p>A safety net of life insurance and disability programs</p><br></li><li><p>Tailored financial programs</p><br></li><li><p>Additional elected or voluntary benefits</p><br></li></ul>The Baker Hughes internal title for this role is: Field Specialist IV - SVS - HDGT </div>

<p>About the Role</p><p>The Creative Designer will transform marketing ideas, campaigns, promotions, and business requirements into professional, engaging, and effective visual content.</p><p>The position covers several areas of creative work, including:</p><ul><li><p>Graphic and digital design</p></li><li><p>Social media creative production</p></li><li><p>Digital advertising design</p></li><li><p>UX/UI design for mobile and web</p></li><li><p>Video, reels, and motion content</p></li><li><p>AI-assisted creative production</p></li><li><p>Brand and visual identity</p></li><li><p>eCommerce and product presentation</p></li></ul><p>You will work closely with our Digital Marketing Specialist, management team, developers, photographers, and other team members.</p><p>Main Responsibilities</p><p>You will be responsible for creating high-quality visual content across BASKITT’s digital channels, including:</p><ul><li><p>Social media posts, stories, advertisements, banners, and campaign visuals.</p></li><li><p>Promotional materials for products, offers, discounts, seasonal campaigns, and launches.</p></li><li><p>Creative variations for Meta, Google, TikTok, and other digital advertising platforms.</p></li><li><p>Website and mobile application banners, landing pages, and promotional assets.</p></li><li><p>UX/UI concepts, wireframes, mockups, prototypes, and interface improvements.</p></li><li><p>Short promotional videos, reels, animated advertisements, and other digital video content.</p></li><li><p>Professional product-focused designs and eCommerce promotional materials.</p></li><li><p>Reusable templates and visual systems that maintain BASKITT’s brand consistency.</p></li><li><p>Creative concepts and visual materials produced using both traditional design software and modern AI-powered creative tools.</p></li></ul><p>The Creative Designer will also work with the Digital Marketing Specialist to understand campaign objectives and translate marketing requirements into professional visual content.</p><p><strong>Desired Candidate Profile</strong></p><p>What We Are Looking For</p><p>The ideal candidate should have practical experience in several of the following areas:</p><p><strong>Performance Marketing</strong></p><p>Managing paid advertising campaigns and optimizing them based on measurable results.</p><p><strong>eCommerce & Mobile App Marketing</strong></p><p>Understanding how to attract users, drive app installations, generate purchases, and improve repeat customer activity.</p><p><strong>Customer Acquisition & Retention</strong></p><p>Developing acquisition, retargeting, remarketing, loyalty, referral, and reactivation campaigns.</p><p><strong>Analytics & Conversion Optimization</strong></p><p>Understanding marketing funnels, customer journeys, conversion rates, attribution, and campaign performance.</p><p><strong>Campaign Planning</strong></p><p>Turning business objectives into structured campaigns with clear audiences, budgets, messaging, timelines, and KPIs.</p><p>Technical Experience</p><p>Experience with several of the following is strongly preferred:</p><ul><li><p>Meta Ads Manager, Google Ads, TikTok Ads, Google Analytics 4 (GA4), Firebase Analytics, Meta Pixel, UTM Tracking, Conversion Tracking, Retargeting and Remarketing, A/B Testing, Funnel Analysis, Marketing Attribution, Dashboard and performance reporting tools</p></li></ul><p>You do not need to be an expert in every platform listed above. We are more interested in <strong>practical experience, measurable results, analytical ability, and the ability to continuously improve campaign performance.</strong></p><p>AI & Productivity Tools</p><p>Experience using modern AI tools to improve marketing productivity is strongly preferred.</p><p>This may include:</p><ul><li><p>ChatGPT, AI-assisted copywriting tools, AI research and analysis tools, AI-powered campaign planning tools, Marketing automation and productivity platforms</p></li></ul><p>We are interested in candidates who understand how to use AI practically to improve efficiency, research, analysis, campaign planning, and marketing execution.</p><p>Language Requirements</p><ul><li><p><strong>Arabic:</strong> Required</p></li><li><p><strong>Kurdish:</strong> Strong advantage</p></li><li><p><strong>English:</strong> Preferred</p></li></ul><p>Work Location</p><p><strong>Sulaymaniyah, Iraq</strong></p><p>This is a <strong>full-time position</strong>, and we are primarily looking for candidates who can work from Sulaymaniyah.</p><p>Salary</p><p>Salary will be discussed based on the candidate’s experience, qualifications, demonstrated abilities, and previous campaign results.</p><p>How to Apply</p><p>Please submit:</p><ul><li><p>Your CV or a summary of your relevant digital marketing experience.</p></li><li><p>Examples of digital marketing or advertising campaigns you have worked on.</p></li><li><p>Any measurable campaign results you can share.</p></li><li><p>Your contact information.</p></li></ul><p>Experience with eCommerce, mobile applications, marketplaces, or digital consumer businesses will be considered a strong advantage.</p><p>Additional information about the role, detailed responsibilities, performance expectations, marketing budget, and interview process will be shared with selected applicants after their initial application.</p>

<p><br><strong>About the Role</strong></p><p><br>The Creative Designer will transform marketing ideas, campaigns, promotions, and business requirements into professional, engaging, and effective visual content.<br></p><p>The position covers several areas of creative work, including:<br></p><ul><li><p>Graphic and digital design</p></li><li><p>Social media creative production</p></li><li><p>Digital advertising design</p></li><li><p>UX/UI design for mobile and web</p></li><li><p>Video, reels, and motion content</p></li><li><p>AI-assisted creative production</p></li><li><p>Brand and visual identity</p></li><li><p>eCommerce and product presentation<br></p></li></ul><p>You will work closely with our Digital Marketing Specialist, management team, developers, photographers, and other team members.</p><p><br><strong>Main Responsibilities</strong><br></p><p>You will be responsible for creating high-quality visual content across BASKITT’s digital channels, including:</p><ul><li><p>Social media posts, stories, advertisements, banners, and campaign visuals.</p></li><li><p>Promotional materials for products, offers, discounts, seasonal campaigns, and launches.</p></li><li><p>Creative variations for Meta, Google, TikTok, and other digital advertising platforms.</p></li><li><p>Website and mobile application banners, landing pages, and promotional assets.</p></li><li><p>UX/UI concepts, wireframes, mockups, prototypes, and interface improvements.</p></li><li><p>Short promotional videos, reels, animated advertisements, and other digital video content.</p></li><li><p>Professional product-focused designs and eCommerce promotional materials.</p></li><li><p>Reusable templates and visual systems that maintain BASKITT’s brand consistency.</p></li><li><p>Creative concepts and visual materials produced using both traditional design software and modern AI-powered creative tools.</p></li></ul><p>The Creative Designer will also work with the Digital Marketing Specialist to understand campaign objectives and translate marketing requirements into professional visual content.</p><p><strong>Desired Candidate Profile</strong></p><p><br><strong>What We Are Looking For</strong></p><p><br>We are particularly interested in candidates with strong practical ability in several of the following areas:</p><p><br><strong>Graphic & Digital Design</strong></p><p><br>Professional social media graphics, advertisements, promotional banners, campaign materials, and digital content.</p><p><br><strong>UX/UI Design</strong></p><p><br>Mobile application and website interfaces, wireframes, prototypes, landing pages, customer journeys, and usability improvements.</p><p><br><strong>Social Media Creative Production</strong></p><p><br>High-quality visual content specifically designed for social media engagement and advertising.</p><p><br><strong>Video & Motion Content</strong></p><p><br>Reels, short videos, animated advertisements, and promotional content suitable for modern digital platforms.</p><p><br><strong>AI-Assisted Creative Production</strong></p><p><br>Practical use of modern AI tools to improve creativity, quality, and production efficiency.</p><p>Candidates do not need to be equally strong in every area. However, <strong>strong graphic design ability and a professional portfolio are essential</strong>, while practical UX/UI capability is highly preferred.</p><p><br><strong>Tools & Technology</strong></p><p><br>Experience with tools such as the following is valuable:</p><ul><li><p>Figma</p></li><li><p>Adobe Photoshop</p></li><li><p>Adobe Illustrator</p></li><li><p>Adobe Express</p></li><li><p>Canva</p></li><li><p>CapCut</p></li><li><p>Video and motion graphics tools</p></li><li><p>Prototyping and digital illustration tools</p></li><li><p>AI-powered image, video, and creative platforms</p></li></ul><p>You do not need to use every tool listed above. <strong>The quality of your work, creativity, speed, attention to detail, and ability to choose the right tool for the task are more important than the specific software you use.</strong></p><p><br><strong>Language Requirements</strong><br></p><ul><li><p><strong>Arabic:</strong> Required</p></li><li><p><strong>Kurdish:</strong> Strong advantage</p></li><li><p><strong>English:</strong> Preferred</p></li></ul><p>Candidates should be comfortable creating and designing Arabic content and understand appropriate typography, layout, and right-to-left design requirements.</p><p><br><strong>Work Location</strong></p><p><br><strong>Sulaymaniyah, Iraq</strong></p><p>This is a <strong>full-time position</strong>, and we are primarily looking for candidates who can work from Sulaymaniyah.</p><p><br><strong>Salary</strong></p><p><br>Salary will be discussed based on experience, qualifications, portfolio quality, creative abilities, and UX/UI capabilities.</p><p><br><strong>How to Apply</strong></p><p><br>Please submit:</p><ul><li><p>Your CV or a short summary of your professional experience.</p></li><li><p>Your portfolio or examples of your strongest creative work.</p></li><li><p>Your contact information.</p></li></ul><p><strong>A professional portfolio is required. Applications without a portfolio or sufficient examples of previous creative work may not be considered.</strong></p><p>Additional information about the position, detailed responsibilities, portfolio requirements, and the interview process will be shared with selected applicants after their initial application.</p>

<p>Accountability The Schedule & Risk Coordinator is accountable for maintaining an effective Project Risk Management process, coordinating risk mitigation activities, and ensuring alignment of interface schedules and milestones across the CSSP Project. The role supports integration between WIP and Pipeline Project schedules, follows execution progress from the field, and provides reliable information to support project decision-making. The position serves as backup to the Planning Engineer when required; however, ownership of the Integrated Project Schedule, schedule development, forecasting, and baseline control remains with the Planning Engineer.</p><br><p><strong>Technical Skills</strong></p><ul><li><p>Strong knowledge of project risk management methodologies, quantitative and qualitative risk assessment techniques, and risk reporting systems.</p></li><li><p>strong understanding of construction execution processes, construction sequencing, work packaging, site productivity, and contractor performance monitoring.</p></li><li><p>Strong capability to evaluate construction readiness, identify execution constraints, and assess impacts on project milestones and critical paths.</p></li><li><p>Proficient in Primavera P6 and schedule analysis techniques, including critical path analysis, float consumption, schedule risk assessment, and recovery planning.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor's degree in Engineering, Project Management, Construction Management, Risk Management, or a related discipline.</p></li><li><p>Minimum 7-10 years of experience in Project Controls, Construction Planning, Risk Management, or Project Execution within major Oil & Gas, Energy, Infrastructure, or EPC projects.</p></li><li><p>Extensive field construction experience with direct involvement in site execution, construction sequencing, workfront planning, contractor performance monitoring, and multidisciplinary team coordination.</p></li><li><p>Proven experience in developing, maintaining, and challenging Project Risk Registers, risk assessments, mitigation plans, and risk management processes.</p></li><li><p>Demonstrated experience in schedule integration, interface management, and coordination of critical milestones across multiple contractors, stakeholders, and project packages.</p></li><li><p>Demonstrated ability to identify, assess, and mitigate construction, logistics, procurement, interface, and country-specific project risks.</p></li><li><p>Proven ability to independently challenge contractor schedules, risk assessments, mitigation strategies, and execution plans through analytical review and field verification.</p></li><li><p>Experience facilitating risk workshops and coordinating mitigation actions with risk owners and project stakeholders.</p></li><li><p>Experience working in complex multi-contractor execution environments, including large-scale brownfield and greenfield developments.</p></li><li><p>Ability to provide risk-based assessments and construction-driven recommendations to support project management decision-making.</p></li><li><p><strong>Personal Competencies</strong></p><ul><li><p>Strong analytical and problem-solving skills.</p></li><li><p>Strong coordination and stakeholder management capabilities.</p></li><li><p>Excellent communication and facilitation skills.</p></li><li><p>Ability to interact effectively with engineering, construction, contractor, PMC, and project management teams.</p></li><li><p>Strong organizational and follow-up skills with attention to detail.</p></li><li><p>Ability to work in a multicultural and fast-paced project environment.</p></li></ul><br><p><strong>Languages:</strong> English is mandatory, knowledge of French and Arabic is a plus</p></li></ul>

<p><h4>Job description</h4> <p>The superintendent is responsible for leading, coordinating, and supervising all site construction activities across oil & gas and water infrastructure projects within the Majnoon oil field. This role ensures safe execution, compliance with project specifications, alignment with KBR standards, and delivery of work packages on schedule. The superintendent acts as the primary interface between field crews, subcontractors, and project management, ensuring operational discipline and high-quality workmanship.</p> <h4>Accountability / expectations</h4> <ul> <li>Direct and supervise daily construction activities for oil & gas facilities, pipelines, water treatment systems, and associated civil works.</li> <li>Manage multi-disciplinary site teams including civil, mechanical, piping, electrical, and water project crews.</li> <li>Coordinate work fronts, manpower allocation, equipment usage, and material availability to maintain progress.</li> <li>Ensure all work is executed in accordance with IFC drawings, project specifications, and KBR procedures.</li> <li>Enforce KBR HSSE policies and site safety rules, lead by example in promoting a strong safety culture.</li> <li>Conduct site inspections, and hazard identification activities.</li> <li>Ensure all permits to work (PTW) are properly issued, controlled, and closed.</li> <li>Support incident investigations and implement corrective actions.</li> <li>Monitor construction quality and ensure compliance with project standards and client requirements.</li> <li>Review and interpret drawings, method statements, and technical documents.</li> <li>Raise and resolve technical queries (TQs) with engineering teams when required.</li> <li>Ensure proper documentation of inspections, test records, and completion certificates.</li> <li>Track daily progress, productivity, and resource utilization; report deviations promptly.</li> <li>Prepare daily/weekly site reports, progress updates, and look-ahead plans.</li> <li>Coordinate with planning and project controls to maintain accurate schedules and forecasts.</li> <li>Oversee subcontractor performance, ensuring adherence to scope, quality, and safety requirements.</li> <li>Validate subcontractor work completion for invoicing and progress measurement.</li> <li>Resolve site-level conflicts and interface issues between contractors and disciplines.</li> <li>Ensure timely availability of materials, tools, and equipment at work fronts.</li> <li>Coordinate with warehouse, procurement, and logistics teams for site needs.</li> <li>Supervise construction of water treatment units, pumping stations, pipelines, and utility networks.</li> <li>Ensure compliance with water project standards, environmental requirements, and testing protocols.</li> <li>Oversee hydrotesting, flushing, commissioning support, and handover documentation.</li> </ul> <h4>Education</h4> <p>Bachelor’s degree or diploma in engineering (civil, mechanical, or related field).</p> <h4>Experience</h4> <ul> <li>10+ years experience in oil & gas construction, experience in water infrastructure projects.</li> <li>Strong knowledge of HSSE systems, PTW, SIMOPS, and field execution in live oilfield environments.</li> <li>Proven leadership experience managing large site teams and subcontractors.</li> <li>Ability to read and interpret engineering drawings and technical documents.</li> </ul></p><p></p>

<p>Drive the execution and performance of the handsets and devices business by owning actions across portfolio, pricing, procurement, and commercialization, leveraging data-driven insights to achieve AOP targets and maximize revenue and profitability. The role is accountable for translating analysis into actions, ensuring optimal device strategy execution across all channels and customer segments Own and drive delivery of AOP targets for device sales volumes and revenue, optimizing all commercial levers. Drive device portfolio strategy and lifecycle management, including product selection, positioning, and phase-out decisions. Own and manage device pricing, promotions, and subsidy frameworks, ensuring margin optimization and ROI. Lead business case development and commercialization strategy for new devices and portfolio initiatives. Own flagship launches and pre-order planning, ensuring readiness, demand capture, and execution excellence. Own forecasting, aligning quantities with market demand and business targets. Define and manage device allocation and channel assortment strategy across digital, retail, B2B, and dealer networks. Oversee inventory performance and stock health, driving corrective actions to manage aging and optimize rotation. Manage and evaluate OEM performance, including pricing, delivery timelines, and support effectiveness. Drive integration of devices with tariffs, financing models, and digital services, ensuring strong end-to-end propositions. Ensure alignment of device value propositions and launch execution across segments and all commercial channels, including bundled offers. Own device performance KPIs and risk management, translating insights into actions to optimize portfolio, pricing, and commercial outcomes.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor s degree in Business Administration, Marketing, Economics, or a relevant quantitative field. An MBA in Marketing or a related management field is highly preferred.</li><li>5+ years of progressive experience in Marketing, specifically within the GSM, Telecommunications, or Internet/Digital Service domains.</li><li>5+ years of experience in partner/vendor management, with a proven track record of coordinating with OEMs, distributors, or external technology providers.</li><li>Advanced command of Excel and PowerPoint for executive reporting and business case development.</li><li>Advanced command of Microsoft Excel (Pivot Tables, data modeling, dashboarding) and PowerPoint for executive reporting and data visualization.</li><li>Excellent proficiency in both English and Arabic (written and verbal) to ensure effective communication with international vendors and local cross-functional teams.</li></ul><p><strong>Behavioral Competencies:</strong></p><ul><li>Delivering Results &amp; Fostering Ownership</li><li>Building Customer Value</li><li>Networking &amp; Influencing Collaboratively</li><li>Leading Teams</li><li>Shaping Strategy</li><li>Driving Change</li></ul><p><strong>Technical Competencies:</strong></p><ul><li>Telecom Market &amp; Industry Knowledge</li><li>Market Segmentation</li><li>Product / Portfolio Strategy Development</li><li>Performance Management &amp; Reporting</li><li>Analytical Thinking</li><li>Creative Thinking</li><li>Business Acumen</li></ul>

<p>Expected: Previous experience in the oil and gas industry, preferably in a safety-related or permit to work coordination role In-depth knowledge of safety regulations and industry best practices, excellent communication skills and ability to work as part of a team Experienced in onshore Greenfield and brownfield project with a very good knowledge of rules, procedures and International Codes and Standards, strong communication and interpersonal skills to collaborate with various stakeholders Degree in engineering, health and safety, or a related field, Certification in industrial safety or risk management (an asset). Wood is recruiting for a PTW Coordinator to join its Iraq business unit responsible for coordinating and overseeing the entire permit to work process. This role is a full-time on-site role in Basra, Iraq on 4 weeks on/4 weeks off rotation with travel requirement. #Wood #Iraq #Basra #PTW Coordinator The role This is an exciting opportunity for an experienced PTW Coordinator to join our Iraq Business Unit. Our Clients and Projects Designing the future. Transforming the world. This Project aims to take over the existing asset and maximize the production in 2 phases. This is a fast-track project and schedule-oriented Design to enhance the production. The Phase 1 will restore, upgrade, and develop the current plant (CPF1) including: Restoration of initial CPF1 capacity; building a new export pipeline (24 , ~30km); restoration of CPF1 integrity and operability; flaring elimination and released water; development of new flowlines, pads, and electrification network for approximately 30 new wells; debottlenecking of the plant; upgrade of the Safety and Security facilities. Our scope is to provide Engineering, Procurement services and Construction assistance (EPsCa) for the initial development phase of the field in Southern Iraq. The scope of services includes FEED, detailed design, procurement support, and construction and commissioning assistance. What we can offer Meaningful and interesting projects Delivered to high profile clients and complex projects in Iraq Commitment to Diversity and Inclusion ; we are an organisation actively committed to diversity and inclusion across our business with employee networks committed to giving all employees a voice Competitive salary with regular salary reviews to ensure we are rewarding at the right level in line with the market Medical Insurance: Ensures inpatient and outpatient medical care is available should you require treatment. Commitment to continued professional development; development plans that are tailored to your individual needs and interests Global connections : join experts around the world who are at the leading edge of our industry, shaping the standards of our profession Long Service Award: Wood values the commitment and loyalty of our people. Celebrating Long Service provides an opportunity for the business to demonstrate their appreciation of the hard work, dedication and many years services of our employees at 5-year service milestones Job Objectives: Responsible for coordinating and overseeing the entire permit to work process. Ensuring strict adherence to safety requirements and operational procedures. Strong understanding of safety regulations in the oil and gas industry, as well as communication and risk management skills. Health, Safety and Environment Activities: Support and enforce project guidelines and Health, Safety and Environment (HSE) objectives. Attend HSE meetings and training when necessary. Participate in or lead Job Safety Analysis, make suggestions, stop dangerous situations, and report anomalies, accidents, and incidents. Activities: Coordinate and oversee the permit to work process to ensure compliance with safety standards and operational procedures. Ensure that workers understand and adhere to safety requirements associated with permits to work. Collaborate with operational teams to safely plan and execute work activities. Identify and assess potential risks associated with tasks and work activities and recommend corrective measures. Provide training and support to employees on permit to work procedures and safety best practices. Responsible for the daily coordination of the Permit to Work (PTW) system for start-up operations. Maintain proper records of all permits and associated certificates raised in connection with operation and facility construction activities.</p><p><strong>Desired Candidate Profile</strong></p><p>Previous experience in the oil and gas industry, preferably in a safety-related or permit to work coordination role</p><p>In-depth knowledge of safety regulations and industry best practices, excellent communication skills and ability to work as part of a team</p><p>Experienced in onshore Greenfield and brownfield project with a very good knowledge of rules, procedures and International Codes and Standards, strong communication and interpersonal skills to collaborate with various stakeholders</p><p>Degree in engineering, health and safety, or a related field, Certification in industrial safety or risk management (an asset).</p>

<p>In coordination with the RMO, support the R&amp;R Officer PSD in monitoring the financial aspects of all PSD projects, including overseeing expenditure, fund availability, and cash flow management. Proactively prepare expenditure plans, internal monitoring reports, for all PSD projects. Identify and address bottlenecks, recommend solutions, and ensure approval processes are followed. In collaboration with PSD Project Officers, PSD Reporting Officer, Partnerships and Coordination Division and RMU, provide support to the R&amp;R Officer in drafting and reviewing project budgets. Assist in conducting analyses on variations between budgeted and actual expenditures and forecast future budget requirements. In collaboration with Resources Management Officer (RMO), identify any unusual trends and notify Project Managers and RMO for timely action and potential remedies to keep projects on track. In collaboration with PSD Officers and relevant technical staff, participate in the design of solutions for PSD's operational requirements. This includes new systems, processes, or tools to meet the identified needs. Support the R&amp;R Officer and program staff in coordinating internal activities and pay particular attention to emerging and cross-cutting issues and work closely with the R&amp;R Officer to address them. Support the successful implementation of PSD projects by facilitating timely and appropriate resource mobilization. Proactively identify opportunities for program development. In coordination with the PSD Reporting Officer conduct project monitoring and evaluation activities through field visits, identify opportunities for development, and flag accountability issues and solutions to the Head of PRD. Support the PSD Project Officers in forecasting cash flows based on project activities and ensure financial expenditures and records adhere to donor agreements. Monitor and track projectization for PSD staff and operations. Track commitments, precommitments, and expenditures to ensure operations align with the project budget. Support program staff in the procurement, transportation and facilitating access in all regions of the country. Collaborate with the Liaison and Access team to address any access issues. Collaborate with Supply Chain Unit to assess the impact of price changes on the overall procurement process. Determine how the price changes may affect budgets, delivery timelines, and other logistical considerations. Perform any additional duties as assigned.</p><p><strong>Desired Candidate Profile</strong></p><h2>Education</h2><p>University degree in Accounting or Business Administration or in a related field from an accredited academic institution with 5 years of relevant professional experience; or Completed Hight School Degree in the above fields or related field from an accredited academic institution with 7 years of relevant professional experience; Accredited Universities are those listed in the UNESCO World Higher Education Database.</p><h2>Experience</h2><p>Experience in emergency settings and complex environments. Experience in IOM administrative and financial management, budget monitoring, cash management and internal control procedures. Experience in the usage of office software packages (MS Word, Excel, etc.) and knowledge of spreadsheet and data analysis. Experience in working in an international environment and in liaising with a variety of partners at all levels of the hierarchy.</p><h2>Skills</h2><p>Familiarity with IOM/UN administrative and financial management. Excellent coordination and information management skills. Ability to extract, interpret, analyse and format data and make decision rapidly to resolve operational problems. Capacity to work effectively in high-pressure, rapidly changing environments. Ability to meet deadlines and work under pressure. Personal commitment, efficiency, flexibility, drives for results. Ability to work effectively and harmoniously with colleagues from varied cultures and professional backgrounds. Ability to handle confidential matters.</p><h2>Languages</h2><p>Fluency in English is required Arabic and Kurdish are advantage Languages. IOM s official languages are English, French and Spanish. Proficiency of language(s) required will be specifically evaluated during the selection process, which may include written and/or oral assessments.</p><h2>Required Competencies</h2><p>IOM s competency framework can be found at this link . Competencies will be assessed during the selection process.</p><h2>Values</h2><p>all IOM staff members must abide by and demonstrate these three values:</p><ul><li><strong>Inclusion and respect for diversity:</strong> Respects and promotes individual and cultural differences. Encourages diversity and inclusion.</li><li><strong>Integrity and transparency:</strong> Maintains high ethical standards and acts in a manner consistent with organizational principles/rules and standards of conduct.</li><li><strong>Professionalism:</strong> Demonstrates ability to work in a composed, competent and committed manner and exercises careful judgment in meeting day-to-day challenges.</li></ul><h2>Courage:</h2><p>Demonstrates willingness to take a stand on issues of importance.</p><h2>Empathy:</h2><p>Shows compassion for others, makes people feel safe, respected and fairly treated.</p><h2>Core Competencies behavioural indicators (Level 2)</h2><ul><li><strong>Teamwork:</strong> Develops and promotes effective collaboration within and across units to achieve shared goals and optimize results.</li><li><strong>Delivering results:</strong> Produces and delivers quality results in a service-oriented and timely manner. Is action oriented and committed to achieving agreed outcomes.</li><li><strong>Managing and sharing knowledge:</strong> Continuously seeks to learn, share knowledge and innovate.</li><li><strong>Accountability:</strong> Takes ownership for achieving the Organization s priorities and assumes responsibility for own actions and delegated work.</li><li><strong>Communication:</strong> Encourages and contributes to clear and open communication. Explains complex matters in an informative, inspiring and motivational way.</li></ul><h2>Managerial Competencies behavioural indicators (Level 2)</h2><p>(applicable only if position is with direct reports)</p><ul><li><strong>Leadership:</strong> Provides a clear sense of direction, leads by example and demonstrates the ability to carry out the Organization s vision. Assists others to realize and develop their leadership and professional potential.</li><li><strong>Empowering others:</strong> Creates an enabling environment where staff can contribute their best and develop their potential.</li><li><strong>Building Trust:</strong> Promotes shared values and creates an atmosphere of trust and honesty.</li><li><strong>Strategic thinking and vision:</strong> Works strategically to realize the Organization s goals and communicates a clear strategic direction.</li><li><strong>Humility:</strong> Leads with humility and shows openness to acknowledging own shortcomings.</li></ul>