Water TreatmentJobs in Iraq

<p>The Water Injection Engineer will be responsible for designing, developing, and optimizing water injection systems to support enhanced oil recovery (EOR) and reservoir pressure maintenance. The role includes conducting hydraulic analysis and simulation modeling, monitoring system performance, optimizing injection efficiency, preparing engineering documentation, supporting commissioning and start-up activities, and ensuring compliance with HSE, environmental, and industry standards. The successful candidate will work closely with reservoir, production, and operations teams to improve field performance and mentor junior engineers.</p><p>Bachelor's degree in Petroleum Engineering, Chemical Engineering, Mechanical Engineering, or a related engineering discipline; a Master's degree is an advantage. Minimum of 10 years of experience in water injection engineering within the Oil & Gas industry. Strong expertise in enhanced oil recovery (EOR), reservoir pressure maintenance, hydraulic analysis, water treatment systems, pipeline hydraulics, and injection well performance. Proficient in Aspen HYSYS, PIPEPHASE, OLGA, or equivalent simulation software. Excellent analytical, project management, communication, and troubleshooting skills. Professional Engineer (PE) registration or equivalent certification is preferred.</p>

<p>The Water Injection Engineer will be responsible for designing, developing, and optimizing water injection systems to support enhanced oil recovery (EOR) and reservoir pressure maintenance. The role includes conducting hydraulic analysis and simulation modeling, monitoring system performance, optimizing injection efficiency, preparing engineering documentation, supporting commissioning and start-up activities, and ensuring compliance with HSE, environmental, and industry standards. The successful candidate will work closely with reservoir, production, and operations teams to improve field performance and mentor junior engineers.</p><p>Bachelor's degree in Petroleum Engineering, Chemical Engineering, Mechanical Engineering, or a related engineering discipline; a Master's degree is an advantage. Minimum of 10 years of experience in water injection engineering within the Oil & Gas industry. Strong expertise in enhanced oil recovery (EOR), reservoir pressure maintenance, hydraulic analysis, water treatment systems, pipeline hydraulics, and injection well performance. Proficient in Aspen HYSYS, PIPEPHASE, OLGA, or equivalent simulation software. Excellent analytical, project management, communication, and troubleshooting skills. Professional Engineer (PE) registration or equivalent certification is preferred.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Job Description: Senior Maintenance Technician – Water Cup Production Line Department: Engineering and Maintenance Industry: Packaged Water / Water Cup Manufacturing Employment Type: Full-time Number of Vacancies: 2 Reports To: Maintenance Supervisor Supervisory Responsibility: Shift maintenance team when assigned Preferred Nationality: Indian/Iranian Job Purpose Provide senior-level, hands-on maintenance support for high-speed thermoforming/Form-Fill-Seal water cup production lines.<br> The Senior Maintenance Technician will lead shift maintenance work, diagnose complex faults, perform precision adjustments, and support preventive and major maintenance activities.<br> Key Responsibilities Implement daily, weekly, monthly, and shutdown maintenance plans.<br> Lead technicians during scheduled maintenance and production-line breakdowns.<br> Diagnose complex mechanical faults and production-related machine problems.<br> Perform machine setup, changeovers, adjustment, alignment, and synchronization.<br> Inspect machine condition and identify developing faults before failure occurs.<br> Carry out preventive, corrective, and major maintenance activities.<br> Escalate recurring faults and support root-cause analysis.<br> Record completed work, findings, parts used, and follow-up actions.<br> Identify future maintenance requirements and critical spare-parts needs.<br> Monitor recurring component failures and recommend technical improvements.<br> Assist with installation, commissioning, and overhaul work when required.<br> Train mechanical technicians and selected production operators.<br> Coordinate with production personnel during adjustment and test runs.<br> Assume responsibility for the maintenance team when the supervisor is unavailable.<br> Follow food-safety, personal-safety, lockout/tagout, and housekeeping requirements.<br> Required Technical Experience Candidates must have practical experience across the complete thermoforming/FFS water cup process: Film feeding, tracking, tensioning, and alignment Heating-zone inspection and adjustment Thermoforming stations, molds, vacuum, and cooling Filling systems, pumps, valves, nozzles, and volume adjustment Lid-film feeding, tracking, and tension control Heat-sealing temperature, pressure, timing, and alignment Cutting, punching, and cup-discharge mechanisms Pneumatic cylinders, solenoid valves, regulators, and air systems Bearings, chains, sprockets, timing belts, shafts, and gearboxes Linear guides, conveyors, lubrication systems, and mechanical alignment Candidates must be able to troubleshoot: Poor or incomplete cup forming Film tracking and alignment problems Water leakage and inaccurate filling volume Weak, incomplete, or uneven sealing Cutting and punching defects Mechanical timing and synchronization problems Abnormal vibration, noise, and overheating Repeated stoppages and intermittent machine faults Experience with Thermonox, Beta-Pak, or technically similar high-speed machines is strongly preferred.<br> Required Qualifications Technical diploma or equivalent qualification in Mechanical Maintenance, Mechanical Engineering, Mechatronics, or a related field.<br> Minimum 5–7 years of direct experience on thermoforming/FFS cup production machines.<br> Ability to lead maintenance work during shifts and breakdowns.<br> Strong practical knowledge of precision fitting, alignment, and adjustment.<br> Ability to interpret machine manuals, drawings, and spare-parts diagrams.<br> Basic ability to prepare maintenance records and technical reports.<br> Ability to train and guide junior technicians.<br> Willingness to work shifts and respond to urgent breakdowns.<br> Critical Selection Requirement Applicants must have direct experience maintaining machines that form, fill, and seal plastic water cups.<br> Experience limited to bottled-water lines, RO systems, vehicles, buildings, utilities, or general factory maintenance does not meet the position’s core requirement.<br></span> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Job Description: Maintenance Supervisor – Water Cup Production Line Department: Engineering and Maintenance Industry: Packaged Water / Water Cup Manufacturing Employment Type: Full-time Number of Vacancies: 1 Reports To: Factory Manager / Operations Manager Direct Reports: Senior Maintenance Technicians and Mechanical Maintenance Technicians Preferred Nationality: Indian/Iranian Job Purpose Lead the maintenance function for high-speed thermoforming/Form-Fill-Seal water cup production lines.<br> The Maintenance Supervisor will develop maintenance plans, manage the technical team, respond hands-on to major breakdowns, improve machine reliability, and ensure critical spare parts are available.<br> Key Responsibilities Prepare daily, weekly, monthly, quarterly, preventive, and shutdown maintenance plans.<br> Assign maintenance activities and supervise their safe, timely completion.<br> Lead troubleshooting during major breakdowns and recurring machine failures.<br> Conduct root-cause analysis and implement permanent corrective actions.<br> Reduce unplanned downtime and improve equipment reliability and availability.<br> Coordinate maintenance schedules and machine interventions with production.<br> Prepare maintenance checklists, SOPs, equipment histories, and technical reports.<br> Monitor equipment condition and recommend repairs, overhauls, or replacements.<br> Develop critical spare-parts lists for the complete production line.<br> Forecast spare-parts requirements and establish minimum and maximum stock levels.<br> Monitor spare-parts consumption, failure frequency, and component service life.<br> Prepare accurate technical specifications for purchasing spare parts and services.<br> Evaluate the technical suitability of proposed replacement components.<br> Train senior technicians, mechanical technicians, and selected production employees.<br> Ensure compliance with safety, food-hygiene, and lockout/tagout requirements.<br> Maintain proper housekeeping and tool control during maintenance activities.<br> Required Technical Experience Candidates must have direct, hands-on experience maintaining thermoforming/FFS machines that form, fill, and seal water cups, including: Plastic-film feeding, tracking, and tension control Heating and thermoforming stations Forming molds, vacuum systems, and cooling arrangements Water-filling mechanisms, nozzles, pumps, and volume adjustment Lid-film feeding and alignment systems Heat-sealing temperature, pressure, and timing control Cutting, punching, and cup-discharge systems Pneumatic cylinders, valves, regulators, and air preparation Bearings, chains, sprockets, timing belts, shafts, and gearboxes Linear guides, conveyors, lubrication systems, and machine alignment Mechanical synchronization of high-speed production equipment Experience with Thermonox, Beta-Pak, or technically similar high-speed machines is strongly preferred.<br> Required Qualifications Diploma or bachelor’s degree in Mechanical Engineering, Mechatronics, Industrial Maintenance, or a related discipline.<br> Minimum 7–10 years of relevant maintenance experience.<br> Demonstrated supervisory experience in a production environment.<br> Strong mechanical troubleshooting and root-cause-analysis ability.<br> Ability to prepare preventive maintenance plans, SOPs, checklists, and reports.<br> Working knowledge of maintenance KPIs, downtime analysis, and spare-parts control.<br> Ability to read mechanical drawings, manuals, parts diagrams, and specifications.<br> Willingness to work hands-on and respond to breakdowns outside normal hours when required.<br> Critical Selection Requirement General maintenance experience alone is not sufficient.<br> Candidates whose experience is limited to bottled-water filling lines, RO plants, automotive maintenance, building maintenance, utilities, or unrelated factory equipment will not qualify unless they also have substantial direct experience with thermoform/FFS water cup production machines.<br></span> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Job Description: Mechanical Maintenance Technician – Water Cup Production Line Department: Engineering and Maintenance Industry: Packaged Water / Water Cup Manufacturing Employment Type: Full-time Number of Vacancies: 5 Reports To: Maintenance Supervisor / Senior Maintenance Technician Preferred Nationality: Indian/Iranian Job Purpose Perform hands-on preventive and corrective mechanical maintenance on high-speed thermoforming/Form-Fill-Seal water cup production machines.<br> The technician will inspect, service, repair, adjust, and troubleshoot equipment throughout the complete cup-forming, filling, sealing, cutting, and discharge process.<br> Key Responsibilities Perform scheduled preventive maintenance according to approved checklists.<br> Respond quickly to production-line breakdowns and restore equipment safely.<br> Inspect, dismantle, repair, replace, and reassemble mechanical components.<br> Clean, lubricate, adjust, and align machine parts and assemblies.<br> Check film feeding, heating, forming, filling, sealing, cutting, and discharge stations.<br> Replace bearings, chains, sprockets, timing belts, seals, guides, and other wear parts.<br> Service shafts, gearboxes, conveyors, pumps, pneumatic cylinders, and valves.<br> Assist with mold changes, machine setup, alignment, and trial production.<br> Identify abnormal noise, vibration, temperature, wear, leakage, and misalignment.<br> Report developing defects and required spare parts to senior maintenance personnel.<br> Record completed work, replaced components, and observed machine conditions.<br> Support major maintenance, overhauls, installations, and shutdown activities.<br> Work with production operators to identify and correct machine-related quality problems.<br> Maintain tools and keep maintenance areas clean and organized.<br> Follow all safety, food-hygiene, and lockout/tagout procedures.<br> Required Technical Experience Candidates should have strong practical knowledge of: Thermoforming stations and molds Plastic-film feeding, tracking, and tension systems Heating systems and heating zones Vacuum systems Pneumatic cylinders, valves, and air-control components Filling mechanisms, pumps, and filling nozzles Lid-film feeding and alignment systems Heat-sealing stations Cutting and punching systems Cup-discharge mechanisms Bearings, chains, sprockets, and timing belts Shafts, couplings, and gearboxes Linear guides and mechanical slides Conveyors and pumps Lubrication and preventive maintenance Candidates must be able to assist in diagnosing and correcting: Poor or incomplete cup forming Film misalignment, slipping, or incorrect tension Water leakage or incorrect filling volume Weak, uneven, or incomplete sealing Cutting and punching problems Machine timing and synchronization faults Abnormal vibration, noise, wear, or overheating Repeated machine stoppages Experience with Thermonox, Beta-Pak, or technically similar high-speed machines is strongly preferred.<br> Required Qualifications Technical certificate or diploma in Mechanical Maintenance, Industrial Maintenance, Mechanical Engineering, or a related field.<br> Minimum 3–5 years of practical experience on thermoforming/FFS cup production machines.<br> Strong mechanical fitting and troubleshooting skills.<br> Ability to use standard maintenance tools and precision measuring instruments.<br> Basic ability to read drawings, equipment manuals, and parts diagrams.<br> Ability to work safely under pressure during production breakdowns.<br> Willingness to work shifts, overtime, and emergency maintenance when required.<br> Ability to follow instructions and work effectively within a maintenance team.<br> Critical Selection Requirement This is a specialized production-line maintenance position.<br> Applicants whose experience is limited to bottled-water filling lines, RO plants, automotive maintenance, building maintenance, or general factory maintenance will not qualify unless they also possess direct thermoforming/FFS water cup production-machine experience.<br></span> </div>

<p>Managing the office side of project execution on a day-to-day basis: ensuring sites have the materials, machinery, and approvals they need before they are required, and converting drawings, specifications, and bill of quantities into actionable, approved information; measuring what has been completed, documenting, certifying, and uploading it in the interim statements so the company receives its full dues on time. This role is the liaison between sites, suppliers, and the client consultant, and conveys this liaison in English.</p><p><strong>&nbsp; Tasks and responsibilities &nbsp;</strong></p><p><strong>First: Office logistics and procurement support</strong></p><p>▪&nbsp;&nbsp;&nbsp; Consolidate material requests from all sites into a single organized purchase plan, in sequence of the project schedule, rather than processing each request separately.</p><p>▪&nbsp;&nbsp;&nbsp; Prepare technical RFIs and RFQs, and obtain at least three quotes for each material or service of significant value.</p><p>▪&nbsp;&nbsp;&nbsp; Prepare technical and financial comparison tables, verify each quote against specifications, and raise recommendations to management for award.</p><p>▪&nbsp;&nbsp;&nbsp; Prepare internal purchase requests, follow up on issued purchase orders, fix delivery dates, and expedite any supplier that is delayed.</p><p>▪&nbsp;&nbsp;&nbsp; Maintain a material tracking log — what was requested, in transit, delivered, and still pending — and circulate weekly.</p><p>▪&nbsp;&nbsp;&nbsp; Identify long lead-time materials at the start of each project, and notify management in writing of any material threatening its planned delivery schedule.</p><p>▪&nbsp;&nbsp;&nbsp; Coordinate transport, hire machinery, and equipment movement between sites, and secure related permits.</p><p>▪&nbsp;&nbsp;&nbsp; Maintain a log of machinery and equipment: location, operating hours, fuel consumption, maintenance dates, and certificate validity.</p><p>▪&nbsp;&nbsp;&nbsp; Control minimum stock levels of consumables and monitor their distribution to sites against signed requests.</p><p><strong>Second: Delegation of works from the technical office</strong></p><p>▪&nbsp;&nbsp;&nbsp; Review drawings, specifications, and BOQs before work starts, raise RFI on any conflict to be resolved at the office, not on site.</p><p>▪&nbsp;&nbsp;&nbsp; Prepare as-built (Shop Drawings) and As-Built drawings, reinforcement schedules, and cutting lists.</p><p>▪&nbsp;&nbsp;&nbsp; Prepare and submit material submittals with their technical data, and maintain a log of their status and dates.</p><p>▪&nbsp;&nbsp;&nbsp; Issue the latest approved edition of each drawing to site, and withdraw obsolete editions from circulation.</p><p>▪&nbsp;&nbsp;&nbsp; Compile quantities from drawings and compare with the BOQ; define additional works before execution, not after.</p><p>▪&nbsp;&nbsp;&nbsp; Prepare method statements, ITPs, and material approval requests.</p><p>▪&nbsp;&nbsp;&nbsp; Review daily and weekly site reports, update progress against the schedule, and raise variances with reasons.</p><p><strong>Third: Measurement, interim payments, and cost control</strong></p><p>▪&nbsp;&nbsp;&nbsp; Prepare interim monthly progress certificates: measurement sheets, quantities, supporting documents, and a pictorial record, submitted on the contractual date.</p><p>▪&nbsp;&nbsp;&nbsp; Verify subcontractor interim payments against actual billed works, and certify only what is proven.</p><p>▪&nbsp;&nbsp;&nbsp; Prepare change orders and extension requests with supporting documents and cost analysis.</p><p>▪&nbsp;&nbsp;&nbsp; Maintain a comparison of actual cost vs budget for each item in the BOM and escalate any overruns when they occur, not at project close.</p><p>▪&nbsp;&nbsp;&nbsp; Reconcile material consumption with theoretical quantities from drawings and report waste or loss.</p><p><strong>Fourth: Subcontractors and suppliers</strong></p><p>▪&nbsp;&nbsp;&nbsp; Prepare scopes of work for subcontractors and RFQ packages, and compare bids on a comparable basis.</p><p>▪&nbsp;&nbsp;&nbsp; Maintain approved suppliers and subcontractors lists, with contact details, prices, and past performance records.</p><p>▪&nbsp;&nbsp;&nbsp; Monitor validity of subcontractor insurance and bonds, registrations, and work permits, and provide warnings before expiry.</p><p><strong>Fifth: Planning and reporting</strong></p><p>▪&nbsp;&nbsp;&nbsp; Maintain baseline schedule and update actual progress on agreed dates (MS Project or Primavera P6).</p><p>▪&nbsp;&nbsp;&nbsp; Prepare weekly and monthly progress reports, including the cumulative progress curve (S-Curve), labor and equipment curves, and pictorial log.</p><p>▪&nbsp;&nbsp;&nbsp; Maintain a log of action items arising from client, consultant, and internal meetings, and follow through to closure.</p><p>▪&nbsp;&nbsp;&nbsp; Contribute to preparing tender timelines, method of execution, and resource schedules accompanying bids.</p><p><strong>Sixth: Documentation and correspondences in English</strong></p><p>▪&nbsp;&nbsp;&nbsp; Draft technical correspondences, RFIs, approvals, transmittals, and progress reports in English with sound technical terminology.</p><p>▪&nbsp;&nbsp;&nbsp; Attend meetings with clients and consultants, present the technical position, and prepare meeting minutes.</p><p>▪&nbsp;&nbsp;&nbsp; Control project documentation: numbering, transmittal log, drawing register, and archiving all outgoing and incoming items in an organized manner.</p><p>▪&nbsp;&nbsp;&nbsp; Note: Company clients are international entities and organizations, and their contracts, specifications, and correspondences are in English only; thus English writing proficiency is a mandatory requirement for this role, not an added bonus.</p><p><strong>&nbsp; Qualifications and experience &nbsp;</strong></p><p>▪&nbsp;&nbsp;&nbsp; Bachelor’s degree in Civil Engineering (preferred), or Electrical or Mechanical Engineering, from a recognized university.</p><p>▪&nbsp;&nbsp;&nbsp; Valid membership in the Engineers Syndicate or equivalent in the work country.</p><p>▪&nbsp;&nbsp;&nbsp; Four (4) years of experience or more with a contracting company in the technical office or in project execution; design office experience alone is not a substitute.</p><p>▪&nbsp;&nbsp;&nbsp; Proficiency in English speaking and writing — mandatory. Arabic is the daily language for site coordination.</p><p>▪&nbsp;&nbsp;&nbsp; Proficiency in AutoCAD, advanced Excel, Word, and MS Project or Primavera P6; familiarity with Revit and BIM systems is a plus.</p><p>▪&nbsp;&nbsp;&nbsp; Ability to quantify accurately and read civil, structural, and MEP drawings and specifications.</p><p>▪&nbsp;&nbsp;&nbsp; Practical knowledge of FIDIC contracts and the structure of BOQs and certifying interim payments is a plus.</p><p>▪&nbsp;&nbsp;&nbsp; Valid driving license and willingness to travel to sites.</p><p><strong>&nbsp; Personal skills and competencies &nbsp;</strong></p><p>▪&nbsp;&nbsp;&nbsp; Numerical accuracy — this role deals with quantities that translate into money, and any miscalculation will cost later.</p><p>▪&nbsp;&nbsp;&nbsp; Organizational ability to manage multiple projects concurrently without neglecting any.</p><p>▪&nbsp;&nbsp;&nbsp; Proactive rather than reactive: procurement and submission ahead of need, not after work stops due to shortage.</p><p>▪&nbsp;&nbsp;&nbsp; Clear and proper English writing, enabling communication with the consultant without rephrasing the letter.</p><p>▪&nbsp;&nbsp;&nbsp; Discretion in dealing with prices, costs, profit margins, and supplier terms.</p><p>▪&nbsp;&nbsp;&nbsp; Ability to stand firm on a technical position under client or consultant pressure, and escalate to management instead of yielding.</p><p><strong>&nbsp;</strong></p>

<p>The Chief Engineer will be based at one of the Amentum sites in Iraq and serve the Operations and Maintenance Support Services (OMSS) contract in support of the U.S. Department of State. The Chief Engineer is responsible for all water purification, water storage, water distribution and wastewater treatments, as well as generators, and associated power generation, transmission and distribution equipment. The Chief Engineer is also responsible for the safe operation and maintenance of power plants, generators, compressors, air conditioning systems, etc., and operates industrial machinery and equipment in various forms.</p><p>DUTIES:</p><ul><li>Responsible for maintaining a safe workplace and ensuring safety is the highest priority in the workplace.</li><li>Comply with all Environmental &amp; Safety and Quality Assurance requirements and goals. Provide information and materials to these divisions as necessary to ensure adequate and legal documentation.</li><li>Responsible for managing, monitoring and tracking physical plant and building operations services.</li><li>Supervise and oversee the operations of the water and wastewater treatment plants to include all water quality laboratory, pumping, filtering, piping and control systems.</li><li>Ensure the viability, availability and safety of water treatment and waste distribution systems.</li><li>Maintain water well operations and water storage systems.</li><li>Manage water treatment waste stream to contractual standards.</li><li>Oversee the:</li><ul><li>Prime power and water/wastewater treatment programs;</li><li>Operation, calibration, diagnostics, troubleshooting and repairs to all mechanical, electrical equipment systems and electrical/pneumatic control systems.</li><li>Preventative maintenance, condition monitoring, repair, installation and modernization of all power generation, transmission and distribution equipment on site; and</li><li>Support of prime power generators made by Caterpillar, Cummins, Perkins, FG Wilson and other manufacturers, with outputs ranging from 20KW up to 160KW.</li></ul><li>Provide daily guidance and direction to supervisors, operators, mechanics and technicians.</li><li>Perform scheduled and unscheduled inspections.</li><li>Report any malfunctions or lack of compliance with SOW to the Chief Engineer.</li><li>Assist in developing the SOW when requested, including diagrams and specifications in compliance with Overseas Building Operations (OBO), Environmental Protection Agency (EPA), Occupational Safety and Health Administration (OSHA) and National electric Code (NEC) standards.</li><li>Maintain effective, timely and respectful communication and interaction with other employees and managers and support other organizations.</li><li>Perform administrative tasks including ordering material, inventorying and scheduling work.</li><li>Manage logistics, stock levels and workflow processes.</li><li>Collect, analyze and summarize data for report preparation and submit written reports.</li><li>Maintain appropriate technical library and record keeping, which documents all procedures necessary to accomplish assigned responsibilities.</li><li>Responsible for facility custodianship of work area and management of tools, equipment and spare parts.</li><li>Take initiative to analyze situations and make frequent technical decisions based on specifications, safety and electrical codes.</li><li>Evaluate operational effectiveness and develop/maintain effective operational control mechanisms.</li><li>Responsible for allocating and managing staff resources according to changing needs</li><li>Identify problem areas and respond to mission requirements to perform task order requirements.</li><li>Plan and manage projects.</li><li>Control resources; monitor staff proficiency and qualifications; monitor the locations and activities of assets; and coordinate the flow of information to and from O&amp;M staff and USG representatives.</li><li>Resolve physical plant and building operations issues.</li><li>Provide professional engineering guidance for all future work and technical proposals and will be responsible for drafting and presenting reports and analysis of system performance and recommendations for improvement.</li><li>Interpret all architectural, civil, structural, mechanical, electrical, plumbing, and fire system diagrams or drawings for large facilities.</li><li>Continually interface with Department of State Facility Management personnel in order to coordinate the work being completed on the equipment systems within the Utilities section and brief the customer during meetings and site surveys.</li><li>Perform additional duties and projects as assigned.</li></ul><p>REQUIRED:</p><ul><li>Minimum Acceptable Experience Level:</li><ul><li>Five (5) or more years supervisory experience in physical plant and building operations, including power plants for large facilities.</li></ul><li><br></li><li><br></li><li>Language Skills: Strong, professional, oral and written English communication skills.</li><li>Medical: Favorable passage of a drug screen and physical examination.</li></ul><p>DESIRED:</p><ul><li>Degree in Electrical or Mechanical Engineering.</li><li>Relevant overseas physical plant and building operations experience.</li><li>Previous out of home country experience is highly desirable and previous work experience in harsh environmental conditions is a plus.</li><li>Experience working with Amentum.</li></ul><p>OTHER KNOWLEDGE, SKILLS AND ABILITIES:</p><ul><li>Knowledge of principles and processes involved in operating and supporting power generation, transition, and distribution as well as water and wastewater treatment functions at an overseas facility.</li><li>Experience providing excellent customer services.</li><li>Ability to work in a fast-paced environment that requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules.</li><li>Cross-cultural sensitivity with an international perspective.</li><li>Excellent organizational and time management skills.</li><li>Ability to become an active and functioning member of a team.</li><li>Must have the ability to be innovative and be an agent for change.</li></ul><p><br></p><p><strong>Desired Candidate Profile</strong></p><ul><li><br></li></ul>

<p>The Chief Engineer will be based at one of the Amentum sites in Iraq and serve the Operations and Maintenance Support Services (OMSS) contract in support of the U.S. Department of State.</p><p>The Chief Engineer is responsible for all water purification, water storage, water distribution and wastewater treatments, as well as generators, and associated power generation, transmission and distribution equipment.</p><p>The Chief Engineer is also responsible for the safe operation and maintenance of power plants, generators, compressors, air conditioning systems, etc., and operates industrial machinery and equipment in various forms.</p><p>The duties and responsibilities listed are representative of the nature and level of work assigned and are not necessarily all inclusive.</p><p><b><br></b></p><p><b>DUTIES:</b></p><ul><li>Responsible for maintaining a safe workplace and ensuring safety is the highest priority in the workplace.</li><li>Comply with all Environmental &amp; Safety and Quality Assurance requirements and goals.</li><li>Provide information and materials to these divisions as necessary to ensure adequate and legal documentation.</li><li>Responsible for managing, monitoring and tracking physical plant and building operations services.</li><li>Supervise and oversee the operations of the water and wastewater treatment plants to include all water quality laboratory, pumping, filtering, piping and control systems.</li><li>Ensure the viability, availability and safety of water treatment and waste distribution systems.</li><li>Maintain water well operations and water storage systems.</li><li>Manage water treatment waste stream to contractual standards.</li><li>Oversee the: Prime power and water/wastewater treatment programs; Operation, calibration, diagnostics, troubleshooting and repairs to all mechanical, electrical equipment systems and electrical/pneumatic control systems.</li><li>Preventative maintenance, condition monitoring, repair, installation and modernization of all power generation, transmission and distribution equipment on site; and Support of prime power generators made by Caterpillar, Cummins, Perkins, FG Wilson and other manufacturers, with outputs ranging from 20KW up to 160KW.</li><li>Provide daily guidance and direction to supervisors, operators, mechanics and technicians.</li><li>Perform scheduled and unscheduled inspections.</li><li>Report any malfunctions or lack of compliance with SOW to the Chief Engineer.</li><li>Assist in developing the SOW when requested, including diagrams and specifications in compliance with Overseas Building Operations (OBO), Environmental Protection Agency (EPA), Occupational Safety and Health Administration (OSHA) and National electric Code (NEC) standards.</li><li>Maintain effective, timely and respectful communication and interaction with other employees and managers and support other organizations.</li><li>Perform administrative tasks including ordering material, inventorying and scheduling work.</li><li>Manage logistics, stock levels and workflow processes.</li><li>Collect, analyze and summarize data for report preparation and submit written reports.</li><li>Maintain appropriate technical library and record keeping, which documents all procedures necessary to accomplish assigned responsibilities.</li><li>Responsible for facility custodianship of work area and management of tools, equipment and spare parts.</li><li>Take initiative to analyze situations and make frequent technical decisions based on specifications, safety and electrical codes.</li><li>Evaluate operational effectiveness and develop/maintain effective operational control mechanisms.</li><li>Responsible for allocating and managing staff resources according to changing needs</li><li>Identify problem areas and respond to mission requirements to perform task order requirements.</li><li>Plan and manage projects.</li><li>Control resources; monitor staff proficiency and qualifications; monitor the locations and activities of assets; and coordinate the flow of information to and from O&amp;M staff and USG representatives.</li><li>Resolve physical plant and building operations issues.</li><li>Provide professional engineering guidance for all future work and technical proposals and will be responsible for drafting and presenting reports and analysis of system performance and recommendations for improvement.</li><li>Interpret all architectural, civil, structural, mechanical, electrical, plumbing, and fire system diagrams or drawings for large facilities.</li><li>Continually interface with Department of State Facility Management personnel in order to coordinate the work being completed on the equipment systems within the Utilities section and brief the customer during meetings and site surveys.</li><li>Perform additional duties and projects as assigned.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><br></li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Site Construction Superintendent (Oil, Gas &amp; Water)<br><br><br><p><b>Job Description</b>: Superintendent Oil &amp; Gas &amp; Water Projects&nbsp;</p><br><br><p><b>Company</b>: KBR Iraq</p><br><br><p><b>Location:&nbsp;</b>Majnoon Oil Field, Iraq Rotation 28/28</p><br><br><p><b>Nationality:</b>&nbsp;Any</p><br><br><br><p>The Superintendent is responsible for leading, coordinating, and supervising all site construction activities across Oil &amp; Gas and water infrastructure projects within the Majnoon Oil Field. This role ensures safe execution, compliance with project specifications, alignment with KBR standards, and delivery of work packages on schedule. The Superintendent acts as the primary interface between field crews, subcontractors, and project management, ensuring operational discipline and high-quality workmanship.</p><br><br><br><p><b>Accountability / Expectations</b></p><br><br><ul><li>Direct and supervise daily construction activities for oil &amp; gas facilities, pipelines, water treatment systems, and associated civil works.</li><li>Manage multi‑disciplinary site teams including civil, mechanical, piping, electrical, and water project crews.</li><li>Coordinate work fronts, manpower allocation, equipment usage, and material availability to maintain progress.</li><li>Ensure all work is executed in accordance with IFC drawings, project specifications, and KBR procedures.</li><li>Enforce KBR HSSE policies and site safety rules, lead by example in promoting a strong safety culture.</li><li>Conduct site inspections, and hazard identification activities.</li><li>Ensure all permits to work (PTW) are properly issued, controlled, and closed.</li><li>Support incident investigations and implement corrective actions.</li><li>Monitor construction quality and ensure compliance with project standards and client requirements.</li><li>Review and interpret drawings, method statements, and technical documents.</li><li>Raise and resolve technical queries (TQs) with engineering teams when required.</li><li>Ensure proper documentation of inspections, test records, and completion certificates.</li><li>Track daily progress, productivity, and resource utilization; report deviations promptly.</li><li>Prepare daily/weekly site reports, progress updates, and look‑ahead plans.</li><li>Coordinate with planning and project controls to maintain accurate schedules and forecasts.</li><li>Oversee subcontractor performance, ensuring adherence to scope, quality, and safety requirements.</li><li>Validate subcontractor work completion for invoicing and progress measurement.</li><li>Resolve site-level conflicts and interface issues between contractors and disciplines.</li><li>Ensure timely availability of materials, tools, and equipment at work fronts.</li><li>Coordinate with warehouse, procurement, and logistics teams for site needs.</li><li>Supervise construction of water treatment units, pumping stations, pipelines, and utility networks.</li><li>Ensure compliance with water project standards, environmental requirements, and testing protocols.</li><li>Oversee hydrotesting, flushing, commissioning support, and handover documentation.</li></ul><br><p><b>Education</b></p><br><br><p>Bachelor’s degree or diploma in Engineering (Civil, Mechanical, or related field).</p><br><br><br><p><b>Experience</b></p><br><br><p>10+ years experience in Oil &amp; Gas construction, experience in water infrastructure projects.</p><br><br><br><ul><li>Strong knowledge of HSSE systems, PTW, SIMOPS, and field execution in live oilfield environments.</li><li>Proven leadership experience managing large site teams and subcontractors.</li><li>Ability to read and interpret engineering drawings and technical documents.</li></ul><br><br><br> </div>

<p><h4>Division</h4> <p>CSSP (Ratawi Hub – Iraq)</p> <p><strong>Direction:</strong> IM</p> <p><strong>Situation in organization</strong><br> Within the Project Organization, the Lead Interface Engineer reports to the Interface Manager.</p> <p><strong>Job location(s):</strong> CPP Office (Abu Dhabi, UAE) during detailed engineering phase / site (Iraq) during construction phase.</p> <h4>Job dimensions</h4> <p>The Lead Interface Engineer shall assist the Interface Manager on the following:</p> <ul> <li>Take care of the overall management of interface and data changes between stakeholders of the Common Seawater Supply Project, and provide advice on any schedule and commercial issues arising from such interfaces and changes.</li> <li>Ensure that interface management procedures are in place and that EPC and other contractors implement the required interface management system throughout the project duration.</li> </ul> <p>The Lead Interface Engineer is anticipated to start early 2026 and will be based in Abu Dhabi (UAE).</p> <h4>Activities</h4> <p>The job holder shall assist the Interfaces Manager:</p> <ul> <li>With the support of the Project Management Consultant, define, implement and maintain the methodology/procedure to be applied and the corresponding database to be created, to ensure a clear and accurate identification and management of interfaces. This procedure will be as efficient and simple as possible and will be used throughout the life of the project and shall be applied by the different entities/contractors.</li> <li>Management of interface and change data between parties, monitor and control interface and change issues, in order to resolve interface and change issues in a timely and organised manner according to the project interface and change control procedures.</li> <li>Attend major interface meetings, internal and external with other entities of CSSP Project, contractor representatives, vendors, TotalEnergies specialists, partner’s experts, etc. Lead interface and other technical meetings as required.</li> <li>Ensure that HSE requirements are systematically considered all along the interface management process and in particular that interfaces are properly addressed during HAZID/HAZOP/PTR project audits.</li> <li>Consolidate and advise the Project Director and Technical and Project Control Managers of any risks, especially schedule and commercial issues arising from interfaces and changes. Shall be the coordinator of the Management of Change, providing the justification through all disciplines of the change. Ensure complete documentation of all changes, and communication of these in compliance with the processes agreed with BOC and regulatory authorities.</li> <li>Prepare technical papers to support management positions for clarifications or decisions with regulatory authorities of host countries, other entities or partners.</li> <li>Ensure that EPC Contractor implements required interface management system and resources and monitor throughout the project duration that EPC Contractor honours its responsibilities as defined in the project interface procedure.</li> <li>Ensure the implementation of interface changes/optimisations resulting from negotiations of the external interfaces.</li> <li>Together with Project Management Consultant, ensure design consistency and continuity throughout the facilities.</li> <li>Avoid change orders and delays caused by interface issues; ensure timely follow-up of interface issues.</li> <li>Assist the Project Management Consultant, prior to and during construction phase, by anticipating operational interfaces with other parties (clashes or conflicting program).</li> <li>In case of SIMOPS (phased delivery of the plant): propose solutions and participate in definition and resolution.</li> </ul> <h4>Context and environment</h4> <p>Basrah Oil Company (BOC) is undertaking the Seawater Treatment Facilities (STF) project to provide treated seawater to the oil fields in southern Iraq (for injection). The STF will be located on the west side of the Khor Al Zubair, upstream of the port of Umm Qasr and will have the following key components:</p> <ul> <li>Site development and non-process facilities.</li> <li>Ancillaries and buildings.</li> <li>Seawater intake and outfall structures.</li> <li>Material off-loading facility.</li> <li>Seawater clarification, filtration and deoxygenating processes.</li> <li>Chemical addition systems.</li> <li>Shipping pumps.</li> <li>Power generation.</li> <li>Utilities.</li> </ul> <p>FEED was completed (June 2016) with Phase 1 capacity of 7.5 million barrels of water per day (MMBWPD) of treated seawater, with a subsequent Phase 2 of 5 MMBWPD for a total buildout capacity of 12.5 MMBWPD. The project was placed on hold upon the completion of FEED.</p> <p>In 2018 BOC launched a call for tender on the FEED, but instructed bidders to reduce capacity to 5.0 MMBWPD, with provision for a future addition of 2.5 MMBWPD for a total build-out phase of 7.5 MMBWPD.</p> <h4>Accountabilities</h4> <p>Accountable for the interfaces and management of change (MoC), being internal (between units, disciplines, PMT, One Tech and specialists) or external (between other CSSP projects, contractors, company, etc.). The job holder coordinates all interface and MoC matters, protecting the WI Project and company’s position with regards to all external interfaces and to internal interfaces between contractors, and ensuring that changes are evaluated and executed for the overall benefit of the project.</p> <p>Accordingly, the job holder shall make the necessary coordination between all involved contractors/parties and company teams and implement an agreed interface management procedure and methodology. He/she shall ensure the proper and timely follow-up and resolution of interface issues between the various involved parties documents. He/she must support the Interface Manager to ensure full control of the Management of Change process, and shall document all the changes, taking care to perform a full review with various disciplines with project aspects to justify or reject the change.</p> <p>A key aspect of interface coordination is the ability to effectively communicate, across all involved parties, all details related to an interface, including requirements, technical specifications, and potential issues. It is important that the communication channel is promptly established, the proper information is exchanged, and all involved parties acknowledge that they fully understand the interface requirements.</p> <p>The nature of the development might call for a “staged” delivery of the facilities. Simultaneous activities between construction activities and operations activities can occur to meet the agreed schedule.</p> <h4>Qualification</h4> <ul> <li>Degree in engineering.</li> </ul> <h4>Experience</h4> <ul> <li>15 years of relevant experience in industrial projects.</li> <li>A sound multi-discipline technical background complemented by a sound knowledge on onshore surveys campaigns and civil works experience.</li> <li>Very good communication and interpersonal skills and capacity to work in a “transverse” organisation.</li> <li>Mastering English is a must, knowledge of French and Arabic is a plus.</li> </ul></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Lead Interface Engineer<br><br><p><b>Job Description</b></p><br><br><p>Division: CSSP (Ratawi Hub – Iraq) </p><br><br><p>Direction&nbsp;: IM</p><br><br><p><b>Job title: Lead Interface Engineer</b></p><br><br><p><b>Situation in organization</b></p><br><br><p>Within the Project Organization, the Lead Interface Engineer is reporting to the Interface Manager</p><br><br><p>Job Location(s): CPP Office (Abu Dhabi, UAE) during Detailed Engineering Phase / SITE (Iraq) during Construction Phase</p><br><br><p><b>Job dimensions</b></p><br><br><p>The Lead Interface Engineer shall assist the Interface Manager on the following:</p><br><br><ul><li>take care of the overall Management of interface and data changes between stakeholders of the Common Seawater Supply Project, and provide advice on any schedule &amp; commercial issues arising from such interfaces and changes</li><li>ensure that Interfaces Management procedures are in place and that EPC and other contractors implement the required interface management system throughout the project duration</li></ul><p>The Lead Interface Engineer is anticipated to start early 2026 and will be based in Abu Dhabi (UAE).</p><br><br><p><b>Activities</b></p><br><br><p>The job holder shall assist the Interfaces Manager:</p><br><br><ul><li>with the support of the Project Management Consultant, define, implement and maintain the methodology/procedure to be applied and the corresponding database to be created, to ensure a clear and accurate identification and management of interfaces. This procedure will be as efficient and simple as possible and will be used throughout the life of the project and shall be applied by the different entities/ Contractors.</li><li>Management of interface and change data between parties, monitor and control interface and change issues, in order to resolve interface and change issues in a timely and organised manner according to the project interface and change control procedures.</li><li>Attend major interface meetings, internal and external with other entities of CSSP Project, Contractor representatives, Vendors, TotalEnergies specialists, Partner’s experts, etc. Lead interface and other technical meetings as required.</li><li>Ensure that HSE requirements are systematically considered all along the interface management process and in particular that interfaces are properly addressed during HAZID/HAZOP/PTR project audits.</li><li>Consolidate and advise the Project Director and Technical and Project Control Managers of any risks specially schedule &amp; commercial issues arising from interfaces and changes. Shall be the coordinator of the Management of Change, providing the justification through all disciplines of the change. Ensure complete documentation of all changes, and communication of these in compliance with the processes agreed with BOC and regulatory authorities.</li><li>Preparing technical papers to support management positions for clarifications / decisions with regulatory authorities of host countries, other entities or partners.</li><li>Ensure that EPC Contractor implements required interface management system &amp; resources and monitor throughout the project duration that EPC Contractor honours its responsibilities as defined in the project interface procedure.</li><li>Ensure the implementation of interface changes/optimisations resulting from negotiations of the external interfaces.</li><li>Together with Project Management Consultant, ensure design consistency and continuity throughout the facilities.</li><li>Avoid change orders and delays caused by interface issues; ensure timely follow-up of interface issues.</li><li>Assist the Project Management Consultant, prior to and during construction phase, by anticipating operational interfaces with other parties (clashes or conflicting program).</li><li>In case of SIMOPS (phased delivery of the plant): propose solutions and participate to definition and resolution.</li></ul><p><b>Context and environment</b></p><br><br><br><p>Basrah Oil Company (BOC) is undertaking the Seawater Treatment Facilities (STF) project to provide treated seawater to the oil fields in southern Iraq (for injection). The STF will be located on the west side of the Khor Al Zubair, upstream of the port of Umm Qasr and will have the following key components:</p><br><br><ul><li>Site development and non-process facilities.</li><li>Ancillaries and buildings.</li><li>Seawater intake and outfall structures.</li><li>Material off-loading facility.</li><li>Seawater clarification, filtration and deoxygenating processes.</li><li>Chemical addition systems.</li><li>Shipping pumps.</li><li>Power Generation.</li><li>Utilities.</li></ul><p>FEED was completed (June 2016) with Phase 1 capacity of 7.5 million barrels of water per day (MMBWPD) of treated seawater, with a subsequent Phase 2 of 5 MMBWPD for a total buildout capacity of 12.5 MMBWPD. The project was placed on hold upon the completion of FEED.</p><br><br><p>In 2018 BOC launched a call for tender on the FEED, but instructed bidders to reduce capacity to 5.0 MMBWPD, with provision for a future addition of 2.5 MMBWPD for a total build-out phase of 7.5 MMBWPD.</p><br><br><br><p><b>Accountabilities</b></p><br><br><ul><li>Accountable for the interfaces and MoC, being internal (between units, disciplines, PMT, One Tech and Specialists) or external (between other CSSP Projects, Contractors, COMPANY, etc…). The job holder coordinates all interface and MoC matters, protecting the WI Project and COMPANY’s position with regards to all external interfaces and to internal interfaces between Contractors, and ensuring that changes are evaluated and executed for the overall benefit of the Project.</li><li>Accordingly, the job holder shall make the necessary coordination between all involved Contractors/parties and Company Teams and implement an agreed interface management procedure and methodology. She/He shall ensure the proper and timely follow-up and resolution of interfaces issues between the various involved parties documents. She/He must support the Interface Manager to ensure full control of the Management of Change process, and shall document all the changes, taking care to perform a full review with various disciplines with Project aspects to justify or reject the change.</li><li>A key aspect of interface coordination is the ability to effectively communicate, across all involved parties, all details related to an interface, including requirements, technical specifications, and potential issues. It is important that the communication channel is promptly established, the proper information is exchanged, and all involved parties acknowledge that they fully understand the interface requirements.</li><li>The nature of the development might call for a “staged” delivery of the facilities. Simultaneous activities between construction activities and operations activities can occur to meet the agreed schedule.</li></ul><br><p><b><u>Qualification:</u></b></p><br><br><ul><li><span>Degree in</span> Engineering</li></ul><p><b><u>Experience: </u></b></p><br><br><ul><li>15 years of relevant experience in Industrial Projects.</li><li>A sound multi-discipline technical background complemented by a sound knowledge on Onshore Surveys campaigns and civil works experience.</li><li>Very good communication and interpersonal skills and capacity to work in a “transverse” organisation.</li><li>Mastering English is a must, knowledge of French and Arabic is a plus.</li></ul><br><br><br><br><br> </div>

<p><h4>Division</h4> <p>CSSP (Ratawi Hub – Iraq)</p> <p><strong>Direction:</strong> IM</p> <p><strong>Situation in organization</strong><br> Within the Project Organization, the Lead Interface Engineer reports to the Interface Manager.</p> <p><strong>Job location(s):</strong> CPP Office (Abu Dhabi, UAE) during detailed engineering phase / site (Iraq) during construction phase.</p> <h4>Job dimensions</h4> <p>The Lead Interface Engineer shall assist the Interface Manager on the following:</p> <ul> <li>Take care of the overall management of interface and data changes between stakeholders of the Common Seawater Supply Project, and provide advice on any schedule and commercial issues arising from such interfaces and changes.</li> <li>Ensure that interface management procedures are in place and that EPC and other contractors implement the required interface management system throughout the project duration.</li> </ul> <p>The Lead Interface Engineer is anticipated to start early 2026 and will be based in Abu Dhabi (UAE).</p> <h4>Activities</h4> <p>The job holder shall assist the Interfaces Manager:</p> <ul> <li>With the support of the Project Management Consultant, define, implement and maintain the methodology/procedure to be applied and the corresponding database to be created, to ensure a clear and accurate identification and management of interfaces. This procedure will be as efficient and simple as possible and will be used throughout the life of the project and shall be applied by the different entities/contractors.</li> <li>Management of interface and change data between parties, monitor and control interface and change issues, in order to resolve interface and change issues in a timely and organised manner according to the project interface and change control procedures.</li> <li>Attend major interface meetings, internal and external with other entities of CSSP Project, contractor representatives, vendors, TotalEnergies specialists, partner’s experts, etc. Lead interface and other technical meetings as required.</li> <li>Ensure that HSE requirements are systematically considered all along the interface management process and in particular that interfaces are properly addressed during HAZID/HAZOP/PTR project audits.</li> <li>Consolidate and advise the Project Director and Technical and Project Control Managers of any risks, especially schedule and commercial issues arising from interfaces and changes. Shall be the coordinator of the Management of Change, providing the justification through all disciplines of the change. Ensure complete documentation of all changes, and communication of these in compliance with the processes agreed with BOC and regulatory authorities.</li> <li>Prepare technical papers to support management positions for clarifications or decisions with regulatory authorities of host countries, other entities or partners.</li> <li>Ensure that EPC Contractor implements required interface management system and resources and monitor throughout the project duration that EPC Contractor honours its responsibilities as defined in the project interface procedure.</li> <li>Ensure the implementation of interface changes/optimisations resulting from negotiations of the external interfaces.</li> <li>Together with Project Management Consultant, ensure design consistency and continuity throughout the facilities.</li> <li>Avoid change orders and delays caused by interface issues; ensure timely follow-up of interface issues.</li> <li>Assist the Project Management Consultant, prior to and during construction phase, by anticipating operational interfaces with other parties (clashes or conflicting program).</li> <li>In case of SIMOPS (phased delivery of the plant): propose solutions and participate in definition and resolution.</li> </ul> <h4>Context and environment</h4> <p>Basrah Oil Company (BOC) is undertaking the Seawater Treatment Facilities (STF) project to provide treated seawater to the oil fields in southern Iraq (for injection). The STF will be located on the west side of the Khor Al Zubair, upstream of the port of Umm Qasr and will have the following key components:</p> <ul> <li>Site development and non-process facilities.</li> <li>Ancillaries and buildings.</li> <li>Seawater intake and outfall structures.</li> <li>Material off-loading facility.</li> <li>Seawater clarification, filtration and deoxygenating processes.</li> <li>Chemical addition systems.</li> <li>Shipping pumps.</li> <li>Power generation.</li> <li>Utilities.</li> </ul> <p>FEED was completed (June 2016) with Phase 1 capacity of 7.5 million barrels of water per day (MMBWPD) of treated seawater, with a subsequent Phase 2 of 5 MMBWPD for a total buildout capacity of 12.5 MMBWPD. The project was placed on hold upon the completion of FEED.</p> <p>In 2018 BOC launched a call for tender on the FEED, but instructed bidders to reduce capacity to 5.0 MMBWPD, with provision for a future addition of 2.5 MMBWPD for a total build-out phase of 7.5 MMBWPD.</p> <h4>Accountabilities</h4> <p>Accountable for the interfaces and management of change (MoC), being internal (between units, disciplines, PMT, One Tech and specialists) or external (between other CSSP projects, contractors, company, etc.). The job holder coordinates all interface and MoC matters, protecting the WI Project and company’s position with regards to all external interfaces and to internal interfaces between contractors, and ensuring that changes are evaluated and executed for the overall benefit of the project.</p> <p>Accordingly, the job holder shall make the necessary coordination between all involved contractors/parties and company teams and implement an agreed interface management procedure and methodology. He/she shall ensure the proper and timely follow-up and resolution of interface issues between the various involved parties documents. He/she must support the Interface Manager to ensure full control of the Management of Change process, and shall document all the changes, taking care to perform a full review with various disciplines with project aspects to justify or reject the change.</p> <p>A key aspect of interface coordination is the ability to effectively communicate, across all involved parties, all details related to an interface, including requirements, technical specifications, and potential issues. It is important that the communication channel is promptly established, the proper information is exchanged, and all involved parties acknowledge that they fully understand the interface requirements.</p> <p>The nature of the development might call for a “staged” delivery of the facilities. Simultaneous activities between construction activities and operations activities can occur to meet the agreed schedule.</p> <h4>Qualification</h4> <ul> <li>Degree in engineering.</li> </ul> <h4>Experience</h4> <ul> <li>15 years of relevant experience in industrial projects.</li> <li>A sound multi-discipline technical background complemented by a sound knowledge on onshore surveys campaigns and civil works experience.</li> <li>Very good communication and interpersonal skills and capacity to work in a “transverse” organisation.</li> <li>Mastering English is a must, knowledge of French and Arabic is a plus.</li> </ul></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>• Applying and following the client contractual QHSE obligations, PSGS’ QHSE policy and procedures.</p><p>• Maintaining the integrity of the ISO Management Documentation System and standards of ISO 9001, ISO 14001, ISO 22000, &amp; ISO 45001.</p><p>• Maintaining, repairing and installing plumbing and related fixtures and components, as well as appliances and trims.</p><p>• Repairing piping of various sizes and types.</p><p>• Checking safety equipment and replacing components such as washers, gaskets and filters.</p><p>• Inspecting, repairing or replacing pumps, valves and boiler systems.</p><p>• Monitoring work done by outside contractors for adherence to Plumbing Code Requirements and reporting back to direct manager.</p><p>• Installing supports and hangers for pipes, fixtures and equipment.</p><p>• Assembling and installing valves and fittings.</p><p>• Installing, repairing and maintaining water treatment equipment, piping and controls.</p><p>• Testing pipe systems and fixtures for leaks.</p><p>• Ensuring all installations, repairing and maintenance meet the requirements of the appropriate codes.</p><p>• Maintaining good relationship with the client to accomplish ongoing tasks in a timely manner.</p><p>• Ensuring all installations, repairs and maintenance meet environmental protection requirements.</p><p>• Maintaining appropriate service and repair records.</p><p>• Performing preventive/corrective maintenance and call-off activities on daily, weekly and monthly basis and ensuring that the company avoids any liquidated damages.</p><p>• Controlling the inventory for related equipment parts and supplies.</p><p>• Preparing Permit to Work and daily/weekly/monthly reports and sharing them with the management.</p><p>• Preparing estimation for call-off works and sharing it with the management.</p><p>• Coordinating with the client on regular basis for related works and assisting in completing the third-party request.</p><p>• Performing other duties as directed.</p><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>·&nbsp;&nbsp;&nbsp;Diploma in Mechanical or Trade Certificate or a similar discipline</p><p>·&nbsp;&nbsp;&nbsp;5+ years in a similar role, Middle East experience preferred</p><p>·&nbsp;&nbsp;&nbsp;Must understand regulatory compliance and be able to maintain and submit any documentation required</p><p>·&nbsp;&nbsp;&nbsp;Fluent in English, Arabic is an added value</p><p>·&nbsp;&nbsp;&nbsp;Computer literate</p><p><br></p></div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Under general supervision from the Production Manager, The Production Supervisor works in a multi-discipline Asset Operations Team to develop potentially large and challenging unconventional plays and mature oil and gas fields. Identifies innovative ways to apply HAL technology, service capability and expertise within the context of understanding the reservoir, production and facilities to design new, step-change field exploitation methodologies. Integral member of the multi-discipline Production Team comprised of a reservoir engineer, production geologist and field personnel team. Analyzes production history, well files, production equipment and decline curve analysis and nodal analysis of well performance to estimate remaining recoverable reserves, production and cost of upgrading equipment. Selects and implements production technology, service capability and expertise including completion systems comprised of tubing selection, perforating, sand control and fine migration, matrix stimulation, water control and hydraulic fracturing; artificial lift equipment comprised of sucker-rod lift, gas lift, electrical submersible pumps, subsurface hydraulic pumps, progressing-cavity pumps and plunger lift; real-time surveillance and monitoring systems and waterflooding and other enhanced recovery techniques. Uses decline curve analysis and nodal analysis to identify workovers or recompletions candidates and to select and upgrade production equipment. Focuses on maintaining and increasing daily production through optimizing well performance and field operations while controlling operating costs. Performs daily field operations including optimizing well behavior, production, water disposal, chemical injection and treatment, waterflood performance and artificial lift systems. Evaluates proposed modifications to equipment or to operating procedures to improve safety, efficiency and reliability of equipment and ensures all modifications meet statutory and Company standards. Develops and maintains good working relationships with Production Team through effective communication and teamwork.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Requires excellent communication skills and the ability to work closely with geologists, engineers, contractors and asset teams to successfully execute projects from concept to operation; over time, incumbent will become very knowledgeable of HAL technologies and solutions experience together with the exploitation methodologies and technologies that other companies apply. Requires an undergraduate degree and a minimum of eight (8) years of industry experience. Degree in geology or engineering is preferred. Halliburton is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation .</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>&nbsp;It seeks to address critical challenges related to water scarcity, climate change, and agricultural productivity through targeted infrastructure and capacity-building interventions. The project focuses on three key objectives: 1. Water Management: Improve water availability and increase irrigation efficiency to ensure sustainable water supply for agricultural production in the targeted governorates. 2. Climate Change Adaptation: Reduce the impacts of climate change, particularly declining rainfall and increasing water scarcity, by supporting more resilient and efficient irrigated agriculture systems. 3. Agricultural Development: Enhance the productivity and profitability of smallholder farmers and agri-businesses, contributing to improved livelihoods and economic opportunities for vulnerable rural communities. As part of its implementation responsibilities, OUR CLIENT will oversee the design and rehabilitation of irrigation infrastructure, including the lining of water canals, installation of closed irrigation systems, and rehabilitation of pumping stations. The project is expected to be implemented by a team of approximately five personnel and has an estimated budget of USD 12 million. 2. Purpose and Scope of Assignment The HSSE Field Monitor will report directly to the HSSE Senior Analyst / Project Manager and will work in close coordination with Site Engineers and other project team members. The primary function of the HSSE Field Monitor is to support the implementation and monitoring of health, safety, social and environmental measures at project field sites, ensuring that all activities are conducted in compliance with applicable HSSE standards, OUR CLIENT policies, and international best practices. The HSSE Field Monitor shall carry out routine field-level inspections, observation of work activities, reporting of hazards and incidents, and support to awareness-raising efforts among workers and contractors on construction or development project sites. Specific Duties and Responsibilities More specifically, the HSSE Field Monitor will be responsible for the following tasks: Conduct daily site inspections to monitor compliance with HSSE requirements and identify hazards or non-conformities. Observe and report unsafe acts or conditions to the HSSE Analyst or Project Manager and follow up on corrective actions. Support the implementation of Contractor Health and Safety Plans as well as Social and Environmental Management Plans at the field level. Assist in the identification, documentation, and reporting and investigation of incidents, accidents, and near-misses, including gathering witness statements and photographic evidence. Maintain accurate and up-to-date records of HSSE inspections, checklists, and field monitoring reports. Conduct regular field inspections to verify that the contractor is distributing appropriate PPE to all workers in accordance with the project's HSSE requirements and ESMP provisions, and monitor workers' correct and consistent use of PPE on site at all times, documenting any non-compliance and issuing corrective action requests to the contractor accordingly. Support the induction of new workers, contractors, and visitors on site-specific HSSE rules, emergency procedures and safe work practices. Monitor environmental compliance at site level, including waste management, Noise and dust control, water management, and protection of surrounding communities. Assist in the implementation of the CCRM by receiving and logging community grievances at field level and escalating to the relevant team members. Support stakeholder engagement activities and community consultations related to HSSE matters. Participate in HSSE toolbox talks, safety meetings, and training sessions organized for field workers and contractors. Report any social concerns or issues affecting local communities or vulnerable groups near project sites to the HSSE Analyst. Ensure all Health and Safety signage, barriers, and demarcations are correctly installed and maintained on site. Contribute to the preparation of weekly and monthly HSSE field monitoring reports. Perform any other tasks assigned by the HSSE Senior Analyst or Project Manager related to HSSE field implementation. Project reporting PM Key competencies Qualifications and Experience Education A Bachelor's Degree or Diploma in Occupational Health and Safety, Environmental Engineering, Environmental Science, Civil Engineering, or a related field is required. Additional certification in Health and Safety (e.g., NEBOSH, IOSH, or equivalent) will be considered an advantage. Experience At least 1 year of experience in HSSE monitoring or field safety supervision on construction, infrastructure, or development project sites is required. Familiarity with HSSE inspection checklists, incident reporting forms, and field documentation is required. Experience with international organizations or UN agencies is considered an advantage. Knowledge of environmental and social safeguards is an asset. Language Fluency in Arabic is required. Working knowledge of English is desirable. 4. Key Competencies Treats all individuals with respect; responds sensitively to differences and encourages others to do the same. Upholds organizational and ethical norms. Maintains high standards of trustworthiness. Role model for diversity and inclusion. Acts as a positive role model contributing to the team spirit. Collaborates and supports the development of others. Acts as positive leadership role model, motivates, directs and inspires others to succeed, utilizing appropriate leadership styles. Demonstrates understanding of the impact of one's own role on all partners and always puts the end beneficiary first. Builds and maintains strong external relationships and is a competent partner for others (if relevant to the role). Efficiently establishes an appropriate course of action for self and/or others to accomplish a goal. Actions lead to total task accomplishment through concern for quality in all areas.&nbsp;</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>A Bachelor's Degree or Diploma in Occupational Health and Safety, Environmental Engineering, Environmental Science, Civil Engineering, or a related field is required. Additional certification in Health and Safety (e.g., NEBOSH, IOSH, or equivalent) will be considered an advantage.</p><p>At least 1 year of experience in HSSE monitoring or field safety supervision on construction, infrastructure, or development project sites is required.</p><p>Familiarity with HSSE inspection checklists, incident reporting forms, and field documentation is required.</p><p>Experience with international organizations or UN agencies is considered an advantage.</p><p>Knowledge of environmental and social safeguards is an asset.</p><p>Fluency in Arabic is required. Working knowledge of English is desirable.</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>A leading company in the Water Purification &amp; Bottling Industry is looking to hire an experienced Water Treatment &amp; Filtration System Officer to oversee the water treatment and purification system for the bottling line.<br> Responsibilities Operate and monitor modern water filtration and purification systems.<br> Monitor filtration and treatment systems supporting the water bottling line.<br> Ensure efficient and continuous operation of the treatment system.<br> Monitor water quality and ensure compliance with approved specifications and standards.<br> Identify and follow up on operational and technical issues.<br> Coordinate routine operation and maintenance activities to maintain system performance.<br> Minimum 5 years of hands-on experience in operating and maintaining modern water filtration and purification systems.<br> Proven experience with water treatment systems used in water bottling lines.<br> Bachelor’s degree in Engineering.<br> Strong ability to monitor system efficiency and maintain water quality according to approved standards.<br> Previous experience in a water bottling plant or factory is preferred.<br></span> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview ***This position is physically located in Balad, Iraq*** Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. The Water Services Manager is responsible for managing and supervising all water purification functions at multiple locations within Iraq. Area of responsibility includes ensuring water quality regulatory compliance and consumer satisfaction through improved source water quality, optimizing existing treatment and distribution processes, and development of future treatment options. Responsibilities This position description is subject to change at any time as needed to meet the requirements of the program or company. + This position manages all activities related to water quality regulatory compliance + Examines source water quality and investigates proposed changes in the watersheds to improve the quality of the raw water entering the treatment plants + Sets operational criteria for both near-term operations and long-term planning to ensure regulatory compliance. + Provides process design criteria when a facility is in the planning stages to ensure water quality goals are achieved + Examines water regulations and emerging water quality issues to determine options to address these concerns. + Develops innovative ways to optimize processes (combined with operational reality) with the goal of even greater reliability and cost effectiveness in operations. + Performs Job Duties as assigned. Qualifications + Minimum Qualifications: Education/Certifications: One year related experience may be substituted for one year of education, if degree is required. Use the guide below to determine education and experience for this position. + High School Graduate or equivalent required. + Preferred Qualifications: + Bachelor's Degree and/or equivalent field experience is strongly preferred. + Licenses/Certifications: + Shall possess a minimum of a Class B water treatment plant operator (Level 3) certification or equivalent. + Experience: + Twelve (12) years related experience in in water purification and treatment operations with a minimum of seven years' experience in municipal water treatment, municipal water distribution, and/or operation of well systems, water treatment operation, and repair in an overseas location. + Work experience on Reverse Osmosis Water Purification Units (ROWPU) is required. + Must have knowledge of all principles and processes involved in the repair, maintenance, installation, and modernization of water treatment for buildings and grounds at an overseas facility. + Minimum five years supervisory experience in the management of personnel. + Experience with municipal Water Treatment, as well as some knowledge of Water Distribution systems is a required. + Previous experience in a contingency environment is a plus. + Supervisory Responsibilities: + Manages a team of Water Treatment professionals at multiple locations. + Skills: + Excellent computer, interpersonal, and oral and written communication skills required. + Requires excellent organizational skills; with the ability to work under fast paced and adverse conditions. + Working Conditions: + Must be capable of working in an extreme weather conditions with temperatures exceeding 120 degrees Fahrenheit. Indoor and/or outdoor environment with very adverse and harsh conditions (i.e., hot, dry, duty, desert environment with average temperatures of 30 degrees in the winter and 130 degrees in the summer months). + Includes some industrial production environment conditions as well. + Physical Requirements: + Medium work. Exerting up to 50 pounds of force occasionally, and/or up to 30 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects. + Work may require heavy lifting, stooping, climbing, prolonged standing, prolonged sitting, and working with or in areas where a potential could exist for exposure to physical, chemical, or biological agents. Employee use of personal protective equipment (PPE) is required for some situations. PPE includes, but is not limited to, head, foot, torso, respiratory, vision, and hearing protective devices. Must comply with all Fire and Safety Regulations and post policies. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>

<br> <p> <strong>Job Summary</strong> </p> <p>The purpose of this position is to ensure effective and efficient operation of Water Treatment Plant, water analysis and in-house effluent &amp; emission monitoring at plant site and to adhere to standards of regulatory authorities. The Shift Chemist is also to monitor and take measures to maintain the chemistry of water systems including Boiler chemistry within the prescribed Limits.</p> <p> <strong>Essential Duties &amp; Responsibilities:</strong> </p> <ul> <li>Maintain close coordination with Plant Chemist for Monitoring and managing boiler chemistry</li> <li>Carry out on daily basis, analysis of Raw water, Waste water, Water treatment plant, boiler water &amp; steam, Cooling Tower water and closed cooling system according to applicable standards and maintaining system chemistry within the recommended limits.</li> <li>Operate of the water treatment plant (production / regeneration)</li> <li>Collect sample for Lubricant / oil of plant &amp; machinery</li> <li>Manage personal protection device (chemical suits, respirators etc.)</li> <li>Supervise &amp; assist in unloading of all type of chemical from the chemical vendors.</li> <li>Understand OH&amp;S risks / hazards and environmental / legislative aspect / impacts related to work activities.</li> <li>Issue Confined space entry, Gas free certificate etc. as and when required under the Plant Safety rules for ongoing job in the absence of Plant Chemist.</li> <li>Raise work orders for required operational preventative and corrective maintenance</li> <li>Travel extensively (internationally and domestically)</li> <li>You may be assigned other duties to help proactively drive our FieldCore vision and align with our organization s core values.</li> </ul> <p> <strong>Required Qualifications &amp; Experience</strong>:</p> <ul> <li>Bachelor s Degree in Chemical Engineering or Chemistry focus</li> <li>Minimum 3-5 years related experience in a similar position at combined cycle power plant preferably having GE F Class Technology or CCPP/Petrochemicals.</li> <li>English proficiency required</li> </ul> <p> <strong>Desired Characteristics:</strong> </p> <ul> <li>Ability to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals.</li> <li>Ability to write routine reports and correspondence.</li> <li>Ability to speak effectively to employees of the organization</li> </ul> <p> <strong> </strong> </p> <p> <strong> </strong> </p> <p> <em>FieldCore is an equal employment opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, status as a qualified individual with a disability, marital status, pregnancy, sexual orientation, ancestry, genetic information, gender identity, or any other characteristic protected by law</em> </p> <p></p>

<p><h4>About company</h4> <p>Belong, connect, grow, with KBR!<br> The KBR team delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.<br> KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Job purpose</h4> <p>This role aims to provide environmental technical support to the MFD. This role has a strong emphasis on environmental compliance and emergency response. Candidates should be recognised for expertise in the environmental function including but not limited to: emissions, disturbed lands remediation, biodiversity, ecological impacts and environmental management system, as well as waste management and minimisation. The environmental function supports company operations, and this person should have a customer-focused and change management mindset.</p> <h4>Duties and responsibilities</h4> <ul> <li>Implementing environmental policies and practices in Majnoon Oilfield development.</li> <li>Devising strategies to meet targets and encourage best practices.</li> <li>Devising the best tools and systems to monitor performance and implement strategies.</li> <li>Ensuring compliance with Iraqi environmental legislation.</li> <li>Assessing, analysing and collating environmental performance data and reporting information to internal staff, clients and regulatory bodies.</li> <li>Responsible for ensuring that the contractors are fully complying with all environmental policies and regulations of the MFD.</li> <li>Responsible for conducting environmental inspections, developing inspection reports, creating SMART actions and follow-up actions to closure, and supporting field environmental survey work.</li> <li>Supporting field environmental survey work.</li> <li>Supporting delivery of the soil and ground water and noise monitoring program.</li> <li>Responsible for air quality monitoring survey.</li> <li>Assessing, analysing, and collating environmental performance data and reporting information to internal staff and clients.</li> <li>Responsible for the complete environmental data analyses and collecting the water and ODS inventories.</li> <li>Supporting completion of all weekly, monthly, quarterly, and annual environmental reports.</li> <li>Analyzing the passive tubes, STPs reading and submitting a comprehensive report.</li> <li>Scheduling and managing the housekeeping campaigns in MFD.</li> <li>Keeping up to date with relevant changes in environmental legislation and initiatives, including international legislation where applicable.</li> <li>Producing educational or information resources for internal staff, clients or the general public.</li> <li>Delivering the annual World Environmental Day event in the field.</li> </ul> <h4>Qualification & training requirements</h4> <ul> <li>BSc in engineering degree or MSc in environment or equivalent.</li> <li>NEBOSH Environmental Management Certificate is preferred.</li> <li>Working knowledge of HSE-related activities and environmental monitoring programs.</li> <li>Certified ISO 45001 and ISO 14001 or equivalent.</li> </ul> <h4>Experience</h4> <ul> <li>Five years of relevant job experience within the oil & gas industry.</li> <li>Knowledge of HSE rules and regulations of the oil industry.</li> <li>Has an awareness of STP sampling and soil and groundwater-related matters.</li> <li>Knowledge in recognizing environmental issues and problems.</li> <li>Knowledge in using the noise handheld equipment.</li> <li>Experience in data managing and reporting.</li> <li>Demonstrable experience in all functional aspects of environmental monitoring programs, including environmental contract of air quality monitoring, soil and groundwater monitoring, noise monitoring program, environmental reports review, AAQMS (ambient air quality system) station managing and maintaining.</li> <li>Minimum of four years of responsible experience related to contaminated site assessment and remediation, environmental risk assessment, environmental field sampling, monitoring, instrumentation, laboratory analyses and data management.</li> </ul> <h4>Language proficiency, computer and software skills</h4> <ul> <li>MS Office: Excel – Intermediate, Word – Intermediate, PowerPoint – Intermediate.</li> <li>English – Intermediate (verbal & written).</li> </ul> <h4>Skills</h4> <ul> <li>IT skills (Excel, PowerPoint, Microsoft Office, SharePoint).</li> <li>Presentation skills and strong reporting skills.</li> <li>Communication skills, teamwork, and stakeholder engagement.</li> <li>A genuine interest in and understanding of environmental issues and relevant legislation.</li> <li>High proficiency with environmental software, e.g. Env Man as part of air quality monitoring and maintenance of environmental monitoring equipment.</li> </ul></p><p></p>

<p><h4>Job description</h4> <p>The superintendent is responsible for leading, coordinating, and supervising all site construction activities across oil & gas and water infrastructure projects within the Majnoon oil field. This role ensures safe execution, compliance with project specifications, alignment with KBR standards, and delivery of work packages on schedule. The superintendent acts as the primary interface between field crews, subcontractors, and project management, ensuring operational discipline and high-quality workmanship.</p> <h4>Accountability / expectations</h4> <ul> <li>Direct and supervise daily construction activities for oil & gas facilities, pipelines, water treatment systems, and associated civil works.</li> <li>Manage multi-disciplinary site teams including civil, mechanical, piping, electrical, and water project crews.</li> <li>Coordinate work fronts, manpower allocation, equipment usage, and material availability to maintain progress.</li> <li>Ensure all work is executed in accordance with IFC drawings, project specifications, and KBR procedures.</li> <li>Enforce KBR HSSE policies and site safety rules, lead by example in promoting a strong safety culture.</li> <li>Conduct site inspections, and hazard identification activities.</li> <li>Ensure all permits to work (PTW) are properly issued, controlled, and closed.</li> <li>Support incident investigations and implement corrective actions.</li> <li>Monitor construction quality and ensure compliance with project standards and client requirements.</li> <li>Review and interpret drawings, method statements, and technical documents.</li> <li>Raise and resolve technical queries (TQs) with engineering teams when required.</li> <li>Ensure proper documentation of inspections, test records, and completion certificates.</li> <li>Track daily progress, productivity, and resource utilization; report deviations promptly.</li> <li>Prepare daily/weekly site reports, progress updates, and look-ahead plans.</li> <li>Coordinate with planning and project controls to maintain accurate schedules and forecasts.</li> <li>Oversee subcontractor performance, ensuring adherence to scope, quality, and safety requirements.</li> <li>Validate subcontractor work completion for invoicing and progress measurement.</li> <li>Resolve site-level conflicts and interface issues between contractors and disciplines.</li> <li>Ensure timely availability of materials, tools, and equipment at work fronts.</li> <li>Coordinate with warehouse, procurement, and logistics teams for site needs.</li> <li>Supervise construction of water treatment units, pumping stations, pipelines, and utility networks.</li> <li>Ensure compliance with water project standards, environmental requirements, and testing protocols.</li> <li>Oversee hydrotesting, flushing, commissioning support, and handover documentation.</li> </ul> <h4>Education</h4> <p>Bachelor’s degree or diploma in engineering (civil, mechanical, or related field).</p> <h4>Experience</h4> <ul> <li>10+ years experience in oil & gas construction, experience in water infrastructure projects.</li> <li>Strong knowledge of HSSE systems, PTW, SIMOPS, and field execution in live oilfield environments.</li> <li>Proven leadership experience managing large site teams and subcontractors.</li> <li>Ability to read and interpret engineering drawings and technical documents.</li> </ul></p><p></p>