Head Pastry Jobs in Iraq
652 Jobs Found
<p>Under general supervision: From Surface Facilities IAM Project Manager or Project/Asset Manager, supervises the operations on the field projects for a given project or several projects in an asset. Establishes scope of work with site customer and site representative. Checks design documentation for adequacy to specific site conditions and agreed scope of work. Proposes engineering adjustments to site condition as required. Visits site before and during the project and verifies that applied project procedures by contractor will allow compliance of technical requirements and timely completion. Additional responsibilities include verifying project advance payment and contractor resource allocation; commenting and proposing adjustments to comply with project schedule and budget; verifying safety conditions at site and stop work if required; informing management and personnel of unsafe practice. Also participates in site project meetings with contractor and customer, and coordinates site inspection by QA/QC, HSE and commissioning teams in a timely matter. Prepares periodic reports for upper management.</p><p>Additional Role Responsibilities: (1). Supervises the activities of assigned personnel at BIN-UMAR &SINDBAD Stations well site. Performs supervisory duties at the level established by management for the position; (2). Supervises all activities under the Company Health, Safety and Environment (HSE) policies and procedures are fully implemented and adhered to, so that Loss Prevention is maximized; (3). Drive innovative solutions to operating issues, ensure accurate measurement and optimize operations; (4). Prepare, maintain, and execute terminal operating and capital budgets, establish and monitor key performance indicators; (5). Set priorities, assign projects, monitor progress and set standards for a high performing team; (6). Organization and Cooperate with maintenance team do the PM/CM and troubleshooting jobs; (7). Monitor and operate the SAP/CMMS system. (8). Contribute and participate in successful completion of plant improvements; (9). Performs E.R.T. responsibilities as stipulated in Loss Control Procedures and acts as an emergency response team Managerer in case of emergency. (10). Control, minimize and monitor flare losses & waste generation. (11). Coordinates with Royal commission and other outside party for flare losses & waste management. (12). Identify team and individuals limitations and develop contingency plans to address any short fall.</p><p>Qualifications Requires undergraduate degree in Engineering or similar discipline, and preferably a minimum of five (5) years of progressive experience in planning, design and construction of surface facilities for oil fields. Preferred Experience: Minimum of 10-15 years relevant experience in their discipline or in an operations environment within the oil & gas industry. Recognized International Qualifications (NVQ, C&G, OPITO etc) Valid Emergency Response competence CMMS/SAP Experience Coaching & Development Experience (Competence Assessors preferred) Commissioning experience Experience from similar challenging environments. (Wells experience a must for production operations personnel) Valid trade competencies (Complex, Flange Management, ESR s, Small bore tubing etc.) Internationally recognized driving license Good English skills, Arabic speaking advantageous ISSOW/PTW experience</p><p>Location Oils Opertion ST,N 29 Burjesia, Basra, Basrah, 61006, Iraq Job Details Requisition Number: PHONE_NUMBER Experience Level: Experienced Hire Job Family: Operations Product Service Line: Halliburton Project Management Full Time / Part Time: Full Time Additional Locations for this position: Compensation Information Compensation is competitive and commensurate with experience.</p><p><strong>Desired Candidate Profile</strong></p>Requires undergraduate degree in Engineering or similar discipline, and preferably a minimum of five (5) years of progressive experience in planning, design and construction of surface facilities for oil fields. Preferred Experience: Minimum of 10-15 years relevant experience in their discipline or in an operations environment within the oil & gas industry. Recognized International Qualifications (NVQ, C&G, OPITO etc) Valid Emergency Response competence CMMS/SAP Experience Coaching & Development Experience (Competence Assessors preferred) Commissioning experience Experience from similar challenging environments. (Wells experience a must for production operations personnel) Valid trade competencies (Complex, Flange Management, ESR s, Small bore tubing etc.) Internationally recognized driving license Good English skills, Arabic speaking advantageous ISSOW/PTW experience
<p><br></p><p>Expected:</p><p>We are looking for an experienced Civil & Structure Construction Supervisor in onshore Greenfield and brownfield project with a very good knowledge of Oil & Gas International Codes and Standards, rules & procedures.</p><p>Team player with ability to work collaboratively across complex project teams and interface between interdisciplinary departments and within an international team.</p><p>Fluent in English, Arabic.</p><p>The position will be based in Basra (Iraq) on rotational basis (4 On/4 Off). Duration 3-4 years</p><p>The role</p><p>This is an exciting opportunity for an experienced Civil Supervisor to join our Iraq Business Unit.</p><p>Our Clients and Projects</p><p>Designing the future. Transforming the world.</p><p>This Project aims to take over the existing asset and maximize the production in 2 phases. This is a fast-track project and schedule-oriented Design to enhance the production. The Phase 1 will restore, upgrade, and develop the current plant (CPF1) including:</p><ul><li>Restoration of initial CPF1 capacity;</li><li>building a new export pipeline (24 , ~30km);</li><li>restoration of CPF1 integrity and operability;</li><li>flaring elimination and released water;</li><li>development of new flowlines, pads, and electrification network for approximately 30 new wells;</li><li>debottlenecking of the plant;</li><li>upgrade of the Safety and Security facilities.</li></ul><p>Our scope is to provide Engineering, Procurement services and Construction assistance (EPsCa) for the initial development phase of the field in Southern Iraq. The scope of services includes FEED, detailed design, procurement support, and construction and commissioning assistance.</p><p><br></p><p>Job Objectives:</p><p>The Civil & Structure Construction Supervisor is responsible of all Civil & Structure Construction works related to all different Project Construction Packages and modifications works in respect of the following: safety cost efficient high quality according to specifications in time in line with legal aspects and with minimum disturbance operations.</p><p>Will guarantee transparency in relations with subcontractors.</p><p>HSE activities:</p><ul><li>Support and enforce project guidelines and HSE objectives.</li><li>Attend HSE meetings and training when necessary.</li><li>Participate in Job Safety Analysis, make suggestions, stop dangerous situations, and report anomalies and dangerous acts.</li></ul><p>Activities, for his area of expertise:</p><ul><li>Supervise and control the selected Contractor s to carry out the Civil & Structural works in their premises in prefabrication and under construction on the Sites.</li><li>Ensure the proper execution of the works in compliance with safety and environmental protection procedures, technical specifications, budgets, and schedules,</li><li>Optimize and follow the work schedules, to do this check the good organization of the logistics and the Contractor's site,</li><li>Ensure good coordination / interface between the Site (the Contractor and the Operator) and the Construction Manager and the various entities involved in the project (the INSPECTION, TOPOGRAPHY, LOGISTICS departments, the COMMISSIONNING team, the organizations officials for the events, etc.),</li><li>Check the procedures and task sheets of the Companies, participate, or control the risk analyses, help in the preparation / check the work permits,</li><li>Check the technical information provided by the Contractor and its consistency,</li><li>Monitor supplies for the smooth running of the site. (Verification of equipment or consumables).</li><li>Mainly ensure the general supervision of Structural, earthworks and civil engineering, building construction,</li><li>Anticipate all potential problems, propose, if necessary, alternative "practical" solutions,</li><li>Provide occasional general supervision of the works: All Structural Construction works (primary, secondary, and tertiary) structural works, Civil engineering: Marking and realization of track, realization of various protections, Construction control (structural work, finishing work, concrete test control, etc.).</li><li>Ensure the receipt, control, and transmission of all Contractors' documents,</li><li>Establish the daily report (progress of work, number of people, highlights, etc.),</li><li>Participate in weekly meetings, (preparation or control of meeting minutes),</li><li>Validate the acceptance of the works with the Construction Manager and the Contractors.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Bachelor s degree in engineering or construction field. 5 to 10 years of experience in the oil industry, with significant experience in Construction. Previous experience under SIMOPS works will be considered as a plus.</p>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<p><strong>Job Purpose</strong></p><br><p>The Team Leader (TL) has a significant impact on how potential clients assess Control Risks’ capabilities. The TL is responsible for setting and maintaining the highest standards of team presentation and capability to the client, and will coordinate the direction and management of the team. The TL ensures that the team meets all operational and training standards with assistance from the training team and that the team is fully compliant with Control Risks’ standard operating procedures (SOPs) and doctrine at all times. The TL assists in mission planning for all tasks as detailed by the Operations Manager. The TL is responsible for the professional delivery of operational briefs to both the team and clients when required. </p><br><p><strong>Application closing date: 04 September 2026</strong></p><br><p><strong>Start Date: 15 September 2026</strong></p><br><p><strong>_____________________________________________________________________</strong></p><br><p><strong>Role tasks and responsibilities</strong></p><br><ul><li>Demonstrates competence in Control Risks’ SOPs and personal skills.</li><li>Displays client etiquette, discipline and maintain Control Risks’ low profile approach.</li><li>Remains informed about the threats and key issues in Iraq.</li><li>Conducts vehicle and dismounted contact and immediate action drills.</li><li>Maintains advanced first aid skills.</li><li>Possesses competent navigation skills including map-reading, compass and use of GPS.</li><li>Uses vehicle-mounted and handheld communications systems.</li><li>To be fully conversant and comply with Rules for the Use of Force (RUF).</li><li>Maintains competence in all required skills through regular formal assessment.</li></ul><p><strong>Management responsibilities</strong></p><br><ul><li>Conducts certifiable instruction in all relevant operational and medical team requirements in accordance with Control Risks’ training directives.</li><li>Ensures the team maintains a professional approach, appropriate client etiquette, discipline and presentation.</li><li>Ensures that the team conducts effective administration, including vehicle maintenance, equipment husbandry/accountability and reports and returns.</li></ul><p><strong>Operational responsibilities</strong></p><br><ul><li>Assists in conducting risk assessments and operational planning.</li><li>Issues orders to team members and brief clients in line with SOPs when required.</li><li>Conducts venue and route recces and produce reports.</li><li>Commands the team and issue direction to clients.</li><li>Provides emergency medical and primary health.</li></ul> </div>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<span>
<span></span></span><p>We are looking for the right people — people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world’s largest providers of products and services to the global energy industry.</p><br><b>Job Duties</b> <br><p>The Petrophysics Advisor provides expert technical leadership in formation evaluation, reservoir characterization, and petrophysical analysis in support for an oil and gas asset managed under an Integrated Asset Management (IAM) contract.</p><br>
<p>Under broad direction from the Subsurface Technical Manager:</p><br>
<ul>
<li>Develop and apply advanced formation evaluation techniques in support of the evaluation and development of potentially large, yet challenging oil and gas field development projects.</li>
<li>The Geophysical Advisor will perform detailed petrophysical analyses using well logs, core, and fluid data to determine porosity, permeability, water saturation, and hydrocarbon volumes. Integrate data from multiple sources (wireline, LWD, core, SCAL, formation tests, RFT/MDT pressure test/fluid samples, mini-fracs, Diagnostic Fracture Injectivity Tests, and geochem analysis) to generate robust reservoir property models. Evaluate and characterize different lithologies and fluid types within complex reservoir systems. Conduct multi-well and field-level petrophysical studies to support reservoir zonation and facies classification. Develop petrophysical models for input into geological and reservoir simulation workflows.</li>
<li>Provide technical oversight during logging operations (wireline and LWD) and post-job evaluations. Oversee the acquisition, processing, and interpretation of well logging data, ensuring data integrity and quality. Ensure consistency and standardization of petrophysical workflows and data management across the asset.</li>
<li>Solid grounding in petrophysics and working knowledge of development geology, static modeling, geomechanics, geologic operations, directional drilling and drilling & completions.</li>
<li>Be actively involved in technical engagements, present to and establish strong working relationships with senior management and key stakeholders</li>
<li>Present to and participate in internal and external reviews ensuring work deliverables are robust and fit-for-purpose.</li>
<li>Mentor and provide technical guidance to less experienced geoscientists within the asset team.</li>
<li>Promote the adoption of best practices, digital tools, and innovative techniques and technologies in petrophysics. The Petrophysics Advisor will collaborate and stay engaged with other key Halliburton petrophysical technical and product service line professionals, resources and research.</li>
</ul>
<p><strong>Qualifications</strong></p><br>
<ul>
<li>Requires an undergraduate degree in petroleum engineering, geology or Applied sciences and a minimum of 10 years of experience in petrophysical evaluation, which includes experience in oil & gas operators, service companies or consulting companies.</li>
<li>Requires field development and reservoir management experience on a producing field for an oil & gas operator.</li>
<li>Extensive experience in clastic and/or carbonate reservoirs; exposure to mature or brownfield assets preferred</li>
</ul> <p><span>Minimum Qualifications: Minimum qualifications may be acquired through technical schools or equivalent related experience. Candidates having qualifications that exceed the minimum job requirements will receive consideration for higher level roles given (1) their experience, (2) additional job requirements, and/or (3) business needs. Depending on education, experience, and skill level, a variety of job opportunities might be available, including Petrophysics Advisor, Petrophysics Advisor, Sr, and Technical Manager. </span></p><br><br><br><br><p><strong>Halliburton is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation</strong>.</p><br> <p><strong><u>Location</u></strong></p><br>
<p>Oils Opertion ST,N°29 Burjesia, Basra, Basrah, 61001, Iraq</p><br> <p><strong><u>Job Details</u></strong></p><br>
<p><strong>Requisition Number:</strong> 210427 <br><strong>Experience Level: </strong>Experienced Hire <br><strong>Job Family:</strong> Engineering/Science/Technology <br><strong>Product Service Line: </strong>Halliburton Project Management <br><strong>Full Time / Part Time: </strong>Full Time</p><br>
<p><strong>Additional Locations for this position: </strong></p><br> <p><u><strong>Compensation Information</strong></u><br>Compensation is competitive and commensurate with experience.</p><br>
</div>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<span>
<span></span></span><p>We are looking for the right people — people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world’s largest providers of products and services to the global energy industry.</p><br><b>Job Duties</b> <br><p><strong>Position Summary</strong></p><br>
<p>The Geology Advisor provides expert geological interpretation, reservoir characterization, and development planning support for an oil and gas asset managed under an Integrated Asset Management (IAM) contract. </p><br>
<p><strong>Job Duties</strong></p><br>
<p>Under broad direction from the Subsurface Technical Manager:</p><br>
<ul>
<li>Develop and apply advanced development geology techniques in support of the evaluation and development of potentially large, yet challenging oil and gas field development projects.</li>
<li>Accountable for ensuring robust geological understanding of the asset, integrating static and dynamic data to guide reservoir management, field development, and production optimization.</li>
<li>The Geology Advisor will support prospect evaluation work by providing validation of preexisting interpretations as well as creating new interpretations (e.g., structure maps, isopach maps, cross sections, annotated bubble maps, etc.)</li>
<li>Role includes data analysis, reservoir characterization and mapping, determination of reservoir rock and fluid properties, static uncertainty/risk management analysis, deterministic/probabilistic in-place hydrocarbon volumetric calculations, static modeling, reserves estimation, and other work related to reservoir understanding / development.</li>
<li>Lead the interpretation of geological, geophysical, petrophysical, and drilling data to develop robust static reservoir models. Integrating well log, core, seismic, and production data to define reservoir architecture, facies distribution, and structural framework.</li>
<li>Solid grounding in development geology and working knowledge of geologic operations, logging, directional drilling, petrophysics, geophysics, rock and core sampling and analysis, reservoir simulation and drilling & completions.</li>
<li>Understands the fundamentals of petroleum engineering, subsurface uncertainties, risks and technical issues associated with subsurface, wells and surface development opportunities.</li>
<li>Collaborate with production and operations teams to identify and implement production enhancement opportunities. Additionally, translates technical insights into actionable operational and development plans.</li>
<li>Be actively involved in technical engagements, present to and establish strong working relationships with senior management and key stakeholders.</li>
<li>Present to and participate in internal and external reviews ensuring work deliverables are robust and fit-for-purpose.</li>
<li>Mentor and provide technical guidance to less experienced geoscientists within the asset team.</li>
<li>Promote the adoption of best practices, digital tools, and innovative techniques in geoscience.</li>
</ul> <p><strong>Qualifications</strong></p><br>
<ul>
<li>Requires an undergraduate degree in Geoscience and a minimum of 10 years of experience in oil and gas exploration and production roles which may include experience in development geology, static modeling, operations geology, field development planning etc.</li>
<li>Requires field development and reservoir management experience working directly (preferred) or indirectly on a producing field for an oil & gas operator</li>
<li>Extensive experience in clastic and/or carbonate reservoirs; exposure to mature or brownfield assets preferred</li>
</ul> <p><span>Minimum Qualifications: Minimum qualifications may be acquired through technical schools or equivalent related experience. Candidates having qualifications that exceed the minimum job requirements will receive consideration for higher level roles given (1) their experience, (2) additional job requirements, and/or (3) business needs. Depending on education, experience, and skill level, a variety of job opportunities might be available, including Geology Advisor, Geology Advisor, Sr, and Technical Manager. </span></p><br><br><br><br><p><strong>Halliburton is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation</strong>.</p><br> <p><strong><u>Location</u></strong></p><br>
<p>Oils Opertion ST,N°29 Burjesia, Basra, Basrah, 61001, Iraq</p><br> <p><strong><u>Job Details</u></strong></p><br>
<p><strong>Requisition Number:</strong> 210422 <br><strong>Experience Level: </strong>Experienced Hire <br><strong>Job Family:</strong> Engineering/Science/Technology <br><strong>Product Service Line: </strong>Halliburton Project Management <br><strong>Full Time / Part Time: </strong>Full Time</p><br>
<p><strong>Additional Locations for this position: </strong></p><br> <p><u><strong>Compensation Information</strong></u><br>Compensation is competitive and commensurate with experience.</p><br>
</div>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<p><span><strong>Key resposibility: </strong></span></p><br><p>•Follows all relevant Sales procedures so that work is carried out in a controlled and consistent manner.</p><br><p>•Follows the day-to-day operations related to own job in the Sales function to ensure continuity of work.</p><br><p>•Visits doctors in private clinics or hospitals on a daily basis to promote particular products, disseminate product information and convey company messages to achieve monthly sales target. </p><br><p>•Collates accurate and prompt basic sales information and enters them on the CRM system on a daily basis to be revised by the Field Sales Supervisor.</p><br><p>•Coordinates and communicates with sales representatives and direct manager on a daily basis to achieve sales targets.</p><br><p>•Acquires the necessary knowledge of all of the company’s products and/or services in order to help increase sales.</p><br><p>•Complies with all relevant safety, quality, health and environmental procedures and code of conduct to ensure a healthy and safe work environment.</p><br><p><span><strong>Qualifications & experience:</strong></span></p><br><ul><li>Holding bachelor degree in Pharmacy department. </li><li><p>0-3 years of related experience.</p><br></li><li><p>Area of work: Baghdad</p><br></li></ul> </div>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<p><strong>Key resposibility: </strong></p><br><p>•Follows all relevant Sales procedures so that work is carried out in a controlled and consistent manner.</p><br><p>•Follows the day-to-day operations related to own job in the Sales function to ensure continuity of work.</p><br><p>•Visits doctors in private clinics or hospitals on a daily basis to promote particular products, disseminate product information and convey company messages to achieve monthly sales target. </p><br><p>•Collates accurate and prompt basic sales information and enters them on the CRM system on a daily basis to be revised by the Field Sales Supervisor.</p><br><p>•Coordinates and communicates with sales representatives and direct manager on a daily basis to achieve sales targets.</p><br><p>•Acquires the necessary knowledge of all of the company’s products and/or services in order to help increase sales.</p><br><p>•Complies with all relevant safety, quality, health and environmental procedures and code of conduct to ensure a healthy and safe work environment.</p><br><p><strong>Qualifications & experience:</strong></p><br><ul><li>Holding bachelor degree in Pharmacy department. </li><li><p>0-3 years of related experience.</p><br></li><li><p>Area of work: Karuk</p><br></li></ul><br><br> </div>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<p>We are seeking a Logistics Manager to define and implement the logistics strategy supporting operations and projects, while overseeing all transportation, warehousing, freight forwarding, and supply chain activities.</p><ul><li>Lead end-to-end logistics operations for large-scale industrial projects, covering transport, warehousing, supply chain, and fleet management.</li><li>Manage large teams, vehicle fleets, material supply, inventory, and personnel movements in complex environments.</li><li>Oversee logistics contracts, tenders, and service providers, ensuring cost efficiency and operational performance.</li><li>Ensure seamless logistics integration with drilling, field operations, and projects.</li><li>Drive KPI performance, continuous improvement, and local workforce development to ensure operational continuity.</li></ul><p><br></p> </div><h2 class="h5">Skills</h2>
<div data-jb-field="skills"><p>Requirements</p><ul><li>Degree in Engineering, Logistics, or equivalent, with 15+ years of experience in oil & gas logistics or large-scale industrial environments.</li><li>Strong expertise in logistics operations, supply chain, inventory management, transport, warehousing, and contract management.</li><li>Proficient in logistics systems and SAP.</li><li>Proven operational leadership, team management, and stakeholder coordination skills.</li><li>Experienced in working within complex, high-pressure, and multinational environments.</li><li>Fluent in English and Arabic; French is an advantage.</li></ul><p><br></p></div>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<p>We are seeking a Human Resources Manager who will define and drive the HR strategy aligned with business, project, partner requirements and HQ expectations / objectives.</p><ul><li>Lead the full HR function for a 1,500+ employee industrial project, covering HR strategy, operations, staffing, C&B, training, and reporting.</li><li>Drive workforce planning, nationalization, succession, and compliance aligned with business and project objectives.</li><li>Partner with senior leadership, HQ, partners, and authorities on strategic HR matters and operational continuity.</li><li>Lead HR crisis response and ensure workforce readiness, operational excellence, and business continuity.</li></ul><p><br></p> </div><h2 class="h5">Skills</h2>
<div data-jb-field="skills"><p>Requirements</p><ul><li>Master’s degree in HR, Business, or equivalent, with 15+ years of HR experience, including senior leadership roles.</li><li>Strong expertise across the full HR lifecycle, workforce strategy, compliance, and regulatory frameworks.</li><li>Proven experience managing large-scale, international workforces, preferably within multinational or industrial environments.</li><li>Strong strategic leadership, stakeholder management, execution, and decision-making skills.</li><li>Ability to operate effectively in complex, high-pressure environments with a high level of confidentiality.</li><li>Excellent communication skills with HQ, partners, senior management, and key stakeholders.</li><li>Fluent in English and Arabic; French is an advantage.</li></ul><p><br></p></div>
<p>The Operations Manager will be based at the Baghdad Embassy Compound (BEC) site in Iraq and serve the Operations and Maintenance Support Services (OMSS) contract in support of the U.S. Department of State. This position will be responsible for taking ownership of the site operational responsibilities to include directing the daily performance of the organization, planning, scheduling and training processes to meet the requirements of the contract. This position will report to the OMSS Program Manager. The duties and responsibilities listed below are representative of the nature and level of work assigned and are not necessarily all inclusive.</p><p>DUTIES:</p><ul><li>Responsible for maintaining a safe workplace and ensuring that safety is the highest priority in the workplace.</li><li>Comply with all Environmental Health & Safety and Quality Assurance requirements and goals.</li><li>Development and updating of the operations plan and maintenance program on a monthly basis</li><li>Record keeping for site data including as-builts, O&M manuals, commissioning documentation, design drawings, material and equipment cut sheets, etc.</li><li>Develop and maintain the MSDS program and provide access as specified for all EC personnel.</li><li>Develop , implement, and enforce a comprehensive safety program for all O&M Contractor staff, including periodic inspections and training programs.</li><li>Provide information and materials to these divisions as necessary to ensure adequate and legal documentation.</li><li>Revie and maintain current information manuals for building operations and repair services and maintain accurate equipment and personnel records.</li><li>Act as the Program Manager s principal operations representative.</li><li>Responsible for the management of all O&M functions, including ensuring there are qualified personnel to meet staffing requirements, and the central planning, coordination, control, and actual performance of these functions.</li><li>Manage the O&M and other assigned functions on site to ensure overall contract performance, which requires getting information to and from critical operating/supporting elements and directing/coordinating actions to ensure resources are fully utilized to properly perform the mission.</li><li>Monitor system readiness, identify problem areas, and respond to mission requirements to perform contract requirements.</li><li>Direct and monitor the preventive maintenance program; accept, process, coordinate, and assign work orders, projects, and large task assignments.</li><li>Control resources; monitor staff proficiency and qualifications; monitor staff endurance; monitor the location and activities of assets; and coordinate the flow of information to and from O&M staff.</li><li>Perform additional duties and projects assigned.</li></ul><p>REQUIRED:</p><ul><li>Minimum Acceptable Experience Level: Minimum of 15 years experience in Operations and Maintenance services, with a minimum of 5 years experience in large facilities.</li><li>Knowledge, Skills and Abilities:</li><ul><li>Demonstrated working knowledge of Operations and Maintenance activities for a small plant, overseas, or military facility.</li><li>Demonstrated ability to manage required staff.</li><li>Ability to work in a fast-paced environment requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules.</li><li>Cross-cultural sensitivity with an international perspective.</li><li>Excellent organizational and time management skills.</li><li>Computer skills, specifically in Microsoft Word and Excel.</li><li>Ability to become an active and functioning member of a team.</li><li>Ability to be innovative and be an agent for change.</li><li>Expert communication skills to facilitate and disseminate information.</li></ul></ul><p>Education:</p><ul><li>A high school diploma or GED.</li><li>A bachelor s degree in business management, project management or similar discipline leading to a broad management background is preferred.</li></ul><p>Passport, Licenses and Certifications:</p><ul><li>As part of pre-contingency requirements, by the time the visa process starts , candidates must possess a valid passport with a minimum of 18 months remaining until the expiration date with 8 blank pages.</li><li>Valid drivers license.</li></ul><p>Security Vetting:</p><ul><li>Must be able to obtain and maintain a Secret US Government Clearance.</li><li>Note: US Citizenship is required to obtain Secret Clearance.</li></ul><p>Language Skills:</p><ul><li>Satisfactory English proficiency to meet job requirements and to adhere and comply with safety, health, and security measures.</li></ul><p>Medical:</p><ul><li>Successfully complete and pass the medical and dental examinations as required by Amentum and our customer for deployment to Iraq.</li><li>Must maintain physical and dental requirements for duration of deployment.</li></ul><p>DESIRED:</p><ul><li>Relevant experience, skills and knowledge of electrical, mechanical/HVAC, power generation, water systems for a large facility are strongly preferred.</li><li>Relevant overseas operations management experience.</li><li>Previous out of home country experience and previous work experience in harsh environmental conditions are a plus.</li><li>Experience working with Amentum.</li></ul><p>OTHER RESPONSIBILITIES</p><ul><li>Safety - Amentum enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid/buddy aid responsibilities, participating in emergency response tasks, and serving on safety committees and teams.</li><li>Quality - Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the Amentum Quality Policy and carry out job activities in compliance with applicable Amentum Quality System documents and customer contracts. Each employee must read and understand his/her Quality Management and Customer Satisfaction responsibilities.</li><li>Procedure Compliance - Each employee must read, understand, and implement the general and specific operational, safety, quality and environmental requirements of all plans, procedures and policies pertaining to job.</li></ul><p><br></p><p><strong>Desired Candidate Profile</strong></p><ul><li>Minimum of 15 years experience in Operations and Maintenance services, with a minimum of 5 years experience in large facilities.</li><li>Demonstrated working knowledge of Operations and Maintenance activities for a small plant, overseas, or military facility.</li><li>Demonstrated ability to manage required staff.</li><li>Ability to work in a fast-paced environment requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules.</li><li>Cross-cultural sensitivity with an international perspective.</li><li>Excellent organizational and time management skills.</li><li>Computer skills, specifically in Microsoft Word and Excel.</li><li>Ability to become an active and functioning member of a team.</li><li>Ability to be innovative and be an agent for change.</li><li>Expert communication skills to facilitate and disseminate information.</li><li>A high school diploma or GED.</li><li>A bachelor s degree in business management, project management or similar discipline leading to a broad management background is preferred.</li><li>Valid passport with a minimum of 18 months remaining until the expiration date with 8 blank pages.</li><li>Valid drivers license.</li><li>Must be able to obtain and maintain a Secret US Government Clearance.</li><li>Satisfactory English proficiency to meet job requirements and to adhere and comply with safety, health, and security measures.</li><li>Successfully complete and pass the medical and dental examinations as required by Amentum and our customer for deployment to Iraq.</li><li>Must maintain physical and dental requirements for duration of deployment.</li></ul>
<p><h4>Duties</h4>
<p>The LCC/LCC-A site manager will be based at an Amentum site in Iraq and serve the Operations and Maintenance Support Services (OMSS) contract in support of the U.S. Department of State. This position will be responsible for supervising the LCC/LCC-A team in day-to-day operations by assigning projects, coordinating schedules, monitoring performance and quality of workers, and will report to the OMSS program manager. The duties and responsibilities listed below are representative of the nature and level of work assigned and are not necessarily all inclusive.</p>
<ul>
<li>Responsible for maintaining a safe workplace and ensuring that safety is the highest priority in the workplace.</li>
<li>Comply with all Environmental Health & Safety and Quality Assurance requirements and goals. Provide information and materials to these divisions as necessary to ensure adequate and legal documentation.</li>
<li>Receive projects from OMSS COR/ACOR & FAC.</li>
<li>Perform work with considerable independence within established DoS policies, regulations, and technical guidelines.</li>
<li>Oversee the management and implementation of the Program Management Plan.</li>
<li>Oversee the coordination of work priorities and monitoring of methods, procedures, and programs.</li>
<li>Recommend, develop, implement, establish, and enforce procedures and programs to increase efficiency and improve cost effectiveness to the program.</li>
<li>Adhere to company and government processes, regulations, and statutes.</li>
<li>Establish milestones and monitor adherence to master plans and schedules. Identify program problems and obtain solutions, such as allocation of resources or changing contractual specifications.</li>
<li>Direct and coordinate activities to meet goals in terms of performance, objectives/standards, service delivery, quality, and customer satisfaction.</li>
<li>Review work orders and work order reports to ensure the tasks are completed on time and inspect the projects to ensure all work is accomplished per the statement of work.</li>
<li>Confer with staff in order to resolve performance and personnel problems.</li>
<li>Prepare project specific plans and long-range work schedules; delegate specific duties to assigned work crews.</li>
<li>Assist with the implementation of all formal policies and procedures governing site operations.</li>
<li>Submit work order requests as required.</li>
<li>Evaluate the quality and effectiveness of all completed work orders and provide summary feedback both verbally and in writing to the LCC A country manager.</li>
<li>Prepare and submit detailed reports on work completed and on the status of the facility infrastructure systems projects.</li>
<li>Perform additional duties and projects as assigned.</li>
</ul>
<h4>Required</h4>
<p><strong>Minimum acceptable experience level:</strong> Five (5) years’ supervisory experience in at least one of the major construction trades.</p>
<p><strong>Knowledge, skills, and abilities:</strong></p>
<ul>
<li>Possess knowledge of the theories, principles, and practices of project management.</li>
<li>Knowledge of technical information systems.</li>
<li>Ability to demonstrate and provide leadership and collaboration in diverse experiences to address operational methodologies in project planning and management and customer service.</li>
<li>Knowledge of principles and processes involved in supporting contract responsibilities at an overseas facility.</li>
<li>Ability to work in a fast-paced environment which requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules.</li>
<li>Cross-cultural sensitivity with an international perspective.</li>
<li>Excellent organizational and time management skills.</li>
<li>Expert computer skills, specifically in Microsoft Word and Excel.</li>
<li>Ability to become an active and functioning member of a team.</li>
<li>Ability to be innovative and be an agent for change.</li>
<li>Expert communication skills to facilitate and disseminate information.</li>
</ul>
<p><strong>Education:</strong> Bachelor’s degree in construction management or master’s degree in a similar profession is preferred. Verifiable experience managing multiple trades in a large institutional setting or managing construction projects may be considered in lieu of a 4-year degree.</p>
<p><strong>Passport, licenses, and certifications:</strong></p>
<ul>
<li>As part of pre-contingency requirements, by the time the visa process starts, candidates must possess a valid passport with a minimum of 18 months remaining to expiration date with 8 blank pages.</li>
<li>Valid drivers’ license.</li>
<li>Project Management Professional (PMP) certification, current or pursuing, from PMI.</li>
</ul>
<p><strong>Security vetting:</strong> Must be able to obtain and maintain a Secret US Government Clearance. Note: US citizenship is required to obtain a Secret Clearance.</p>
<p><strong>Language skills:</strong> Satisfactory English proficiency to meet job requirements and to adhere and comply with safety, health, and security measures.</p>
<p><strong>Medical:</strong> Successfully complete and pass the medical and dental examinations as required by Amentum and our customer for deployment to Iraq. Must maintain physical and dental requirements for duration of deployment.</p>
<h4>Desired</h4>
<ul>
<li>Knowledge of PowerPoint, Outlook, Project, and Visio.</li>
<li>Previous out of home country experience and previous work experience in harsh environmental conditions are a plus.</li>
<li>Experience working with Amentum.</li>
</ul>
<h4>Other responsibilities</h4>
<ul>
<li><strong>Safety:</strong> Amentum enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid/buddy aid responsibilities, participating in emergency response tasks, and serving on safety committees and teams.</li>
<li><strong>Quality:</strong> Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the Amentum Quality Policy and carry out job activities in compliance with applicable Amentum Quality System documents and customer contracts. Each employee must read and understand his/her Quality Management and Customer Satisfaction responsibilities.</li>
<li><strong>Procedure compliance:</strong> Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to job.</li>
</ul>
<h4>Working and living conditions</h4>
<p>This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environment. Temperatures can reach 120-130 degrees Fahrenheit (50-55 degrees Celsius) during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to Iraq for extended periods.</p>
<p>Work schedules are a minimum of six days per week and ten hours per day, while some jobs have higher daily and weekly minimums. Employees must be willing and able to perform physical activities including, but not limited to, heavy lifting and moving of items, parts, assemblies, and equipment up to the safety regulation maximum; climbing in and out of equipment; crawling; and working outdoors. This includes being able to lift and carry 40 pounds of personal protective equipment for extended periods of time and being capable of running and ‘duck & cover’ during emergencies without putting oneself or others at risk.</p></p><p></p>
<p><strong>Accountant (based in South Iraq)</strong></p><p>Reporting to CFO and Country Manager and/or his/her designate, the duties generally include:</p><p>Ø Manage the accounting functions of branch offices in Iraq to ensure the timely preparation and submission of management accounts, ensure compliance to the statutory requirements and filing of tax returns.</p><p>Ø Prepare statistical reports required by management to make timely business decisions.</p><p>Ø Responsible for weekly bank balance reports for management.</p><p>Ø Ensure the proper accountability of inventory and fixed assets.</p><p>Ø Prepare and submit monthly accounts meeting minutes.</p><p>Ø Ensure all revenues are accurately captured for all on-going jobs.</p><p>Ø Responsible for the calculation/verification and payment of salaries and allowances to office and field engineers and mandatory contributions to local authorities.</p><p>Ø Ensure all renewals relating to the business are timely attended to.</p><p>Ø Ensure a high degree of productivity through proper selection, orientation, training and counselling of accounting staff if necessary.</p><p>Ø Identify weakness in the operating system if any and implement internal control measures.</p><p>> Liaise with auditors, tax consultants, bankers, government authorities, clients and suppliers on related matters.</p><p> </p><p>Skills Required:</p><p>Ø Experience: Minimum 5+ years at management level in the oil and gas industry upstream industry, and preferably from services sector.</p><p>Ø Familiar Navision accounting software</p><p>Ø Knowledge of corporate and secretarial functions</p><p>Ø Familiar with North Iraq and South Iraq statutory requirements</p><p>Ø Handle funds management and banking requirements</p><p>Ø Excellent interpersonal, communication and presentation skills</p><p>Ø Commercial and business awareness</p><p>Ø An analytical approach to work with high numeracy and sound technical skills</p><p>Ø Problem-solving skills and initiative</p><p>Ø Negotiation skills and the ability to influence others</p><p> </p><p>Ø Preferred fluency in written Arabic and English</p><p> </p>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<p>Wood is recruiting for a Punch List Coordinator to join its Iraq business unit focusing on ensuring the completions database development and set-up with systemization, punch-list raising and clearing.</p><br><p>This role is a full-time on-site role in Basra, Iraq with travel requirement.</p><br><br> Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy & Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com<br> <b>Diversity Statement </b><br> We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.<br><br>Responsibilities:<br><p>Wood is recruiting for a Punch List Coordinator to join its Iraq business unit focusing on ensuring the completions database development and set-up with systemization, punch-list raising and clearing.</p><br><p>This role is a full-time on-site role in Basra, Iraq with travel requirement.</p><br><p><i><strong>#Wood #Iraq #Basra #Punch List Coordinator</strong></i></p><br><p><strong><u>The role</u></strong></p><br><p>This is an exciting opportunity for an experienced Punch List Coordinator to join our Iraq Business Unit.</p><br><p><strong>Our Clients and Projects </strong></p><br><p><strong>Designing the future. Transforming the world. </strong></p><br><p>This Project aims to take over the existing asset and maximize the production in 2 phases. This is a fast-track project and schedule-oriented Design to enhance the production. </p><br><p>The Phase 1 will restore, upgrade, and develop the current plant (CPF1) including: Restoration of initial CPF1 capacity; building a new export pipeline (24”, ~30km); restoration of CPF1 integrity and operability; flaring elimination and released water; development of new flowlines, pads, and electrification network for approximately 30 new wells; debottlenecking of the plant; upgrade of the Safety and Security facilities. </p><br><p>Our scope is to provide Engineering, Procurement services and Construction assistance (EPsCa) for the initial development phase of the field in Southern Iraq. The scope of services includes FEED, detailed design, procurement support, and construction and commissioning assistance.</p><br><p><strong><u>What we can offer</u></strong></p><br><ul> <li><strong>Meaningful and interesting projects</strong> Delivered to high profile clients and complex projects in Iraq </li> <li><strong>Commitment to Diversity and Inclusion</strong>; we are an organisation actively committed to diversity and inclusion across our business with employee networks committed to giving all employees a voice </li> <li><strong>Competitive salary</strong> with regular salary reviews to ensure we are rewarding at the right level in line with the market </li> <li><strong>Medical Insurance: </strong>Ensures inpatient and outpatient medical care is available should you require treatment. </li> <li><strong>Commitment to continued professional development;</strong> development plans that are tailored to your individual needs and interests </li> <li><strong>Global connections</strong>: join experts around the world who are at the leading edge of our industry, shaping the standards of our profession </li> <li><strong>Long Service Award: </strong>Wood values the commitment and loyalty of our people. Celebrating Long Service provides an opportunity for the business to demonstrate their appreciation of the hard work, dedication and many years’ services of our employees at 5-year service milestones </li></ul><p><strong><u>Job Objectives:</u></strong></p><br><ul> <li><span>To adopt & demonstrate an exemplary behavior with regard to HSSE requirements.</span></li> <li><span>To adopt and demonstrate an exemplary behavior with regard to the Company Ethics and “Code of Conduct” policy and to promote and enforce the Corporate Anti-Corruption Program within the project team.</span></li> <li><span>To ensure that latest digital and carbon footprint reduction initiatives are studied and implemented if possible.</span></li> <li><span>To ensures the completions database development and set-up with systemization, punch-list raising and clearing.</span></li> <li><span> To walkdown coordination, allocation and closure of check sheets A, B and C, and Coordination with other stakeholder disciplines to develop the completions database and Handover Dossiers. </span></li> <li><span>To provides clear guidance to the EPC contractor and facilitates resolution of completions issues to meet Project objectives and milestones.</span></li> <li><span>To provides Weekly report with forecast of the Punch List closure.</span></li> <li><span>To support the completion, ICAPS Pre-commissioning, commissioning and Start Up activities.</span></li> <li><span>To ensure the ICAPS network is always available.</span></li> <li><span>To oversight Contractor on completion, pre-commissioning, and commissioning activities.</span></li> <li><span>To support the establishment of specific mechanical completion, pre-commissioning and commissioning/start-up progress reporting tools and indicators.</span></li> <li><span>To develop / prepare and follow-up the mechanical completion and commissioning/start-up dossiers to COMPANY.</span></li> <li><span>To follow the Contractor's Pre-Com & commissioning activities as per OPERCOM using ICAPS software.</span></li> <li><span>To Track, report of all pre-commissioning / commissioning activities and the receipt and review of all Completion dossiers Ready for Commissioning and Achievement of Commissioning.</span></li> <li><span>To report the progress of Punch List closure with highlight of risk of schedule slippage.</span></li></ul><br>Qualifications:<br><p><strong>What makes you remarkable? </strong></p><br><p>At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world’s most critical challenges. </p><br><p><strong>Expected:</strong></p><br><p><span><strong>Professional Experience (years):</strong> >20 years in Oil and Gas projects</span></p><br><p><span><strong>Experience in similar position (years): </strong>At least 3 years of experience in similar position during project, relevant site experience in an onshore field and 10 years as Commissioning Manager is required. Experience as Production Manager, Site Manager or equivalent is also required to meet the Filed Operation aspects of this position.</span></p><br><ul> <li><span>Knowledgeable of TOTAL rules and specifications</span></li> <li><span>Knowledgeable of OPERCOM and ICAPS</span></li> <li><span>Knowledgeable of Crystal Report and SQL Server installation</span></li> <li><span>Good communication skills and fluency in English</span></li> <li><span>Good interpersonal and diplomatic skills</span></li></ul><p><span><strong>Level / Diploma:</strong> Engineer</span></p><br><p><span><strong>Languages: </strong>English mandatory</span></p><br><p><span>The position will be based in Basra (Iraq) on rotational basis (4 weeks On/4 weeks Off)</span></p><br> </div>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<p>Wood is recruiting for a Rotating Mechanical Engineer to join its Iraq business unit focusing on developing and implementing preventive and predictive maintenance programs for rotating equipment.</p><br><p>This role is a full-time on-site role in Basra, Iraq with travel requirement.</p><br><p><strong>Reports to:</strong> Construction Manager</p><br><br> Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy & Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com<br> <b>Diversity Statement </b><br> We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.<br><br>Responsibilities:<br><p>Wood is recruiting for a Rotating Mechanical Engineer to join its Iraq business unit focusing on developing and implementing preventive and predictive maintenance programs for rotating equipment.</p><br><p>This role is a full-time on-site role in Basra, Iraq with travel requirement.</p><br><p><strong>Reports to:</strong> Construction Manager</p><br><p><i><strong>#Wood #Iraq #Basra #Rotating Mechanical Engineer</strong></i></p><br><p><strong><u>The role</u></strong></p><br><p>This is an exciting opportunity for an experienced Rotating Mechanical Engineer to join our Iraq Business Unit.</p><br><p><strong>Our Clients and Projects </strong></p><br><p><strong>Designing the future. Transforming the world. </strong></p><br><p>Wood is an integral part of operations in Iraq, and we are continuing to grow our footprint across the country. With a 90-year heritage, 10 major contracts and over 850 employees, we have the skills, expertise and asset knowledge to support clients to deliver energy security and decarbonisation ambitions.</p><br><p>Wood excels in supporting our clients to deliver complex upstream and midstream oil and gas projects in Iraq delivering maintenance, modifications and engineering solutions. We are committed to decarbonising existing assets, producing cleaner energy and developing a sustainable national workforce, ensuring the long-term growth of the region.</p><br><p><strong><u>What we can offer</u></strong></p><br><ul> <li><strong>Meaningful and interesting projects</strong> Delivered to high profile clients and complex projects in Iraq </li> <li><strong>Commitment to Diversity and Inclusion</strong>; we are an organisation actively committed to diversity and inclusion across our business with employee networks committed to giving all employees a voice </li> <li><strong>Competitive salary</strong> with regular salary reviews to ensure we are rewarding at the right level in line with the market </li> <li><strong>Medical Insurance: </strong>Ensures inpatient and outpatient medical care is available should you require treatment. </li> <li><strong>Commitment to continued professional development;</strong> development plans that are tailored to your individual needs and interests </li> <li><strong>Global connections</strong>: join experts around the world who are at the leading edge of our industry, shaping the standards of our profession </li> <li><strong>Long Service Award: </strong>Wood values the commitment and loyalty of our people. Celebrating Long Service provides an opportunity for the business to demonstrate their appreciation of the hard work, dedication and many years’ services of our employees at 5-year service milestones </li></ul><p><strong><u>Job Objectives:</u></strong></p><br><ul> <li><span>Develop and implement preventive and predictive maintenance programs for rotating equipment.</span></li> <li><span>Lead root cause failure analysis (RCFA) and implement corrective actions.</span></li> <li><span>Monitor equipment performance and recommend improvements to enhance reliability and efficiency.</span></li> <li><span>Support condition monitoring activities (vibration analysis, thermography, oil analysis).</span></li> <li><span>Provide technical expertise during troubleshooting, overhauls, and major repairs.</span></li> <li><span>Review maintenance procedures, work packs, and job safety analyses (JSAs).</span></li> <li><span>Ensure compliance with OEM specifications, industry standards (API, ISO), and company procedures.</span></li> <li><span>Prepare maintenance plans, schedules, and spare parts lists for rotating equipment.</span></li> <li><span>Maintain accurate records of maintenance history, failure reports, and performance data.</span></li> <li><span>Support the development of equipment criticality assessments and risk-based maintenance strategies.</span></li> <li><span>Liaise with operations, planning, procurement, and engineering teams to ensure maintenance activities are aligned with production goals.</span></li> <li><span>Participate in HAZOPs, MOCs, and technical audits.</span></li> <li><span>Support audits, inspections, and regulatory compliance efforts.</span></li> <li><span>Provide rotating equipment expertise during facility shutdowns, turnarounds, and brownfield projects.</span></li> <li><span>Ensure that all work complies with health, safety, and environmental standards at West Qurna 1.</span></li> <li><span>Support the application of WQ1-FOD Policy in relation to the Drug and Alcohol policy, Company Ethics, Award conditions, etc, whilst respecting and protecting the personal rights of subordinates.</span></li></ul><br>Qualifications:<br><p><strong>What makes you remarkable? </strong></p><br><p>At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world’s most critical challenges. </p><br><p><strong>Expected:</strong></p><br><ul> <li><span>Bachelor’s degree in Mechanical Engineering or a related discipline.</span></li> <li><span>Minimum of 10 years’ experience specifically in Rotating Equipment Maintenance, preferably in oil & gas and petrochemical sector.</span></li> <li><span>Certifications in vibration analysis (Category I/II) or RCA Training is a plus.</span></li> <li><span>Knowledge on the International Standard related to Mechanical, such as API 610, API 617, ANSI B73.1, ISO 5199, ISO 10816, etc.</span></li></ul><p><span><strong>Skills:</strong></span></p><br><ul> <li><span>Language English and Arabic Proficiency.</span></li> <li><span>Proficiency in reading and interpreting engineering drawings and specifications.</span></li> <li><span>Strong knowledge of rotating machinery design, operation, and maintenance.</span></li> <li><span>Strong knowledge of condition monitoring tools and analysis techniques.</span></li> <li><span>Good awareness in Safety Operations, Risk Assessment, and Best Practice Engineering.</span></li> <li><span>Problem Solving</span></li> <li><span>Excellent Communication and interpersonal skills.</span></li> <li><span>Understand and follow oral and written instructions; prepare clear and concise records, reports and other written materials.</span></li> <li><span>Continuous Improvement</span></li> <li><span>Ability to interact in a multi-cultural environment</span></li> <li><span>Demonstrated experience in liaising with third party contractors, business partners and local communities</span></li></ul><p><span><strong>Systems:</strong></span></p><br><ul> <li><span>Maximo / CMMS / Aconex</span></li> <li><span>Microsoft Offices</span></li></ul> </div>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<p>We are seeking a Field Operations Manager who will Lead and manage field operations and production activities, and ensure safe and efficient oil and gas production aligned with targets.</p><ul><li>Lead field operations and oil & gas production, ensuring safe, reliable, and efficient performance against targets.</li><li>Oversee maintenance, inspection, and operational support activities, with responsibility for OPEX/CAPEX and operational planning.</li><li>Drive production, emissions performance, continuous improvement, digitalization, and operational excellence.</li><li>Ensure compliance with HSE, regulatory, and company standards.</li><li>Manage large multicultural teams, develop the national workforce, and coordinate partners, contractors, and authorities.</li><li>Lead emergency response and crisis management to maintain operational continuity and safety.</li></ul><p><br></p> </div><h2 class="h5">Skills</h2>
<div data-jb-field="skills"><p>Requirements</p><ul><li>Master’s degree in Engineering.</li><li>15+ years of experience in oil & gas operations.</li><li>Strong expertise in production operations and facility management.</li><li>Solid knowledge of oil & gas processing and field operations.</li><li>Proven experience managing complex operational assets.</li><li>Strong leadership and team management capabilities.</li><li>Ability to influence senior stakeholders and business partners.</li><li>Excellent decision-making skills in high-risk environments.</li><li>Experience working in complex industrial and international environments.</li><li>Fluent in English and Arabic; French is an advantage.</li></ul><p><br></p></div>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<p>We are seeking a Acceptability & Communication Manager who will define and implement the communication and stakeholder engagement strategy, and lead internal and external communications (media, digital, corporate messaging, events)</p><ul><li>Define and implement communication and stakeholder engagement strategies.</li><li>Lead internal and external communications, including media, digital, and events.</li><li>Manage reputation topics and crisis communications.</li><li>Build relationships with media, authorities, and key stakeholders.</li><li>Develop corporate content, press releases, and executive messaging.</li><li>Ensure consistent corporate messaging and standards.</li><li>Support stakeholder engagement and project acceptability initiatives.</li><li>Coordinate communications across teams and entities.</li><li>Promote HSE culture through communication activities.</li><li>Ensure confidentiality of sensitive corporate information. </li></ul><p><br></p> </div><h2 class="h5">Skills</h2>
<div data-jb-field="skills"><p>Requirements</p><ul><li>Master’s degree in Communications, Public Affairs, or equivalent.</li><li>8–12 years of experience in corporate communications.</li><li>Strong expertise in stakeholder engagement, media relations, and reputation management.</li><li>Experience in crisis communication and strategic messaging.</li><li>Strong skills in content creation and communication strategy.</li><li>Excellent influencing, communication, and interpersonal skills.</li><li>Ability to operate in sensitive and high-pressure environments.</li><li>Strong project management and coordination capabilities.</li><li>Experience in multinational or complex institutional environments.</li><li>Good understanding of regional dynamics and communication challenges.</li><li>Fluent in English and Arabic (mandatory); French is an advantage.</li></ul><p><br></p></div>
<section><p class="heading jdMain">Job Description</p><p class="heading">Roles & Responsibilities</p><div class="paragraph"><p>The Disposal Yard Specialist will be based at Amentum Baghdad Embassy Compound [BEC] in Baghdad, Iraq, and serve the Base Life Support Services contract in support of the State Department. This position will report to the Disposal Yard Manager. The duties and responsibilities listed below are representative of the nature and level of work assigned and are not necessarily all inclusive.</p><p>DUTIES:</p><ul><li>Responsible for maintaining a safe workplace and ensuring that safety is the highest priority in the workplace.</li><li>Comply with all Environmental Health & Safety and Quality Assurance requirements and goals.</li><li>Provide information and materials to these divisions as necessary to ensure adequate and legal documentation.</li><li>Ensures data accuracy and update of equipment inventory database.</li><li>Ensure that related data processing activities meet the requirements.</li><li>Process excess turn-in documentation for all controlled and non-controlled excess equipment and materials.</li><li>Review, reconcile, adjust and process all inventory transactions.</li><li>Process Survey Reports for all missing equipment.</li><li>Process and coordinate Equipment Transfers.</li><li>Perform positive verbal and written communication skills with all internal and external customers.</li><li>Assist in a broad scope of direct and indirect support activities involving customer owned equipment as necessary to complete assigned tasks.</li><li>Perform additional duties and projects as assigned.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Minimum Acceptable Experience Level: Minimum of 3 years experience supporting a DOD or DOS program Exposure, at least two (2) years of international experience.</li><li>Knowledge, Skills, and Abilities:</li><li>Prior proven experience in Property Disposal operations with Defense Reutilization Management Operations (DRMO), Hazmat experience.</li><li>Experience operating heavy equipment to include up to a 30K Forklift, Extended reach Forklift, Material Handler, Grappler (Excavator), Front End Loader and Material Shredders.</li><li>Experience with cutting torches to include Plasma cutters.</li><li>Commitment to maintaining a high performance team which delivers customer service excellence.</li><li>Knowledge of principles and processes involved in supporting contract responsibilities at an overseas facility.</li><li>Ability to work in a fast-paced environment that requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules.</li><li>Cross-cultural sensitivity with an international perspective.</li><li>Excellent organizational and time management skills.</li><li>Computer skills, specifically in Microsoft Word and Excel.</li><li>Ability to become an active and functioning member of a team.</li><li>Ability to be innovative and be an agent for change.</li><li>Expert communication skills to facilitate and disseminate information.</li><li>Education: A high school diploma or GED (General Education Diploma), Bachelor s Degree in related field fifteen (15) yeas of related experience.</li><li>Passport, Licenses and Certifications:</li><li>As part of pre-contingency requirements, by the time the visa process starts , candidates must possess a valid passport with a minimum of 18 months remaining to expiration date with 8 blank pages.</li><li>Valid drivers license</li><li>Security Vetting: Already possess a US Government issued security clearance or be able to obtain a favorable US Government clearance prior to being hired is required for the position. Must maintain eligibility at the required certification or clearance level for the duration of the contract.</li><li>Language Skills: Satisfactory English proficiency to meet job requirements and to adhere and comply with safety, health, and security measures.</li><li>Medical: Successfully complete and pass the medical and drug examinations as required by Amentum and our customer for deployment to Iraq. Must maintain physical and drug requirements for duration of deployment.</li><li>Previous out of home country experience and previous work experience in harsh environmental conditions are a plus.</li><li>Department of State experience.</li><li>Five to seven years of international experience in challenging locations, preferably working in the Middle East, with a working knowledge of customs and cultural differences.</li><li>Experience working with Amentum-PAE.</li><li>Knowledge of the principles and processes involved in Quality Control Management.</li><li>Successful management of multiple sites in geographically dispersed locations.</li><li>Ability to collect, analyze and summarize data and to prepare clear and concise reports.</li><li>Experience in effectively dealing with international and headquarters staff, and sensitivity to other cultures.</li><li>Exercise sound judgment and make decisions independently.</li><li>Excellent organizational and time management skills, with the ability to handle multiple tasks and administrative details in a fast paced and constantly changing environment. Expert communication skills to facilitate and disseminate information.</li></ul><p></p></section>
<section><p class="heading jdMain">Job Description</p><p class="heading">Roles & Responsibilities</p><div class="paragraph"><p><br></p>
<p> <strong> </strong> </p>
<p> <strong> </strong> </p>
<p> <strong>The opportunity </strong> </p>
<p> <strong> </strong> </p>
<p>To support the significant growth of our Technology Risk service in MENA, EY is looking to hire highly qualified resources. Specifically, as part of this job posting, we are looking for a Senior Consultant / Assistant Manager. Working across many different industries, this role will be responsible for executing and leading IT and cybersecurity projects. It is all about listening to our clients, asking the better questions, and supporting them in areas where there are no off-the-shelf solutions.</p>
<p> </p>
<p> <strong>Your key responsibilities </strong> </p>
<p> <strong> </strong> </p>
<p>A large part of the role will be engagement delivery and EY will expect the candidates to lead and deliver engagements with very minimal supervision. EY also expects the candidates to support executives in development of proposals, presentations and other business development activities. The candidate will be responsible for the delivery and quality of the final reports to EY's clients. </p>
<p>An existing track record of successful engagement delivery in Technology Risk is expected of all candidates for this role. A Big 4 background or comparable consulting experience is highly advantageous. A broad background across IT and Cybersecurity is expected with specific experience in the following areas:</p>
<ul>
<li>Expertise in Risk and Governance Frameworks, including IT governance frameworks (e.g., COBIT, ITIL, NIST), ISO 27001 standards, information security principles, policy development, and risk assessment.</li>
<li>Proficiency in IT Systems Audit, encompassing planning, execution, audit methodologies, complex IT environment evaluation, control weakness identification, and effective communication of findings.</li>
<li>Comprehensive knowledge of internal controls over financial reporting (ICFR), covering ITGCs, ITACs, SOX requirements, supporting financial audits with IT expertise, and strong liaison skills with financial auditors.</li>
<li>Good understanding around the application systems such as SAP, Oracle, Microsoft Dynamics and operating systems and databases.</li>
<li>Strong understanding of Business Continuity Planning (BCP), including BCP/DRP principles, business impact analyses, recovery strategy development, and plan testing.</li>
<li>Strong understanding of cybersecurity fundamentals, including common threats, vulnerabilities, basic principles, and contributions to cybersecurity discussions.</li>
<li>General Skills: Excellent analytical, problem-solving, communication, presentation, project management, organizational, leadership, client service, and business development skills.</li>
</ul>
<p> </p>
<p> <strong>Skills and attributes for success </strong> </p>
<p> </p>
<ul>
<li>Bachelor's degree in Information Technology, Cybersecurity, Computer Science, or in a related field.</li>
<li>Relevant professional certifications (e.g., CISA, CISSP, CISM, ISO 27001 Lead Auditor) are preferred.</li>
<li>Minimum of 3 to 5 years of experience in IT audit, information security, or related fields.</li>
<li>Strong knowledge of ITGC/ITAC, information security frameworks, and cybersecurity best practices.</li>
<li>Excellent analytical, problem-solving, and communication skills.</li>
<li>Ability to work independently and collaboratively within a team environment.</li>
</ul>
<p> </p>
<p><br></p>
<p> <strong> </strong> </p>
<p> <strong> </strong> </p></div></section>
<section><p class="heading jdMain">Job Description</p><p class="heading">Roles & Responsibilities</p><div class="paragraph"><p>Job Purpose: The Team Leader (TL) has a significant impact on how potential clients assess Control Risks capabilities. The TL is responsible for setting and maintaining the highest standards of team presentation and capability to the client, and will coordinate the direction and management of the team. The TL ensures that the team meets all operational and training standards with assistance from the training team and that the team is fully compliant with Control Risks standard operating procedures (SOPs) and doctrine at all times. The TL assists in mission planning for all tasks as detailed by the Operations Manager. The TL is responsible for the professional delivery of operational briefs to both the team and clients when required.</p><p>Role tasks and responsibilities:</p><ul><li>Demonstrates competence in Control Risks SOPs and personal skills</li><li>Display client etiquette, discipline and maintain Control Risks low-profile approach</li><li>Remains informed about the threats and key issues in Iraq</li><li>Conducts vehicle and dismounted contact and immediate action drills</li><li>Maintains advanced first aid skills</li><li>Possesses competent navigation skills including map-reading, compass and use of GPS</li><li>Uses vehicle-mounted and handheld communications systems</li><li>To be fully conversant and comply with Rules for the Use of Force (RUF)</li><li>Maintains competence in all required skills through regular formal assessment</li></ul><p>Management responsibilities</p><ul><li>Conducts certifiable instruction in all relevant operational and medical team requirements in accordance with Control Risks training directives</li><li>Ensures the team maintains a professional approach, appropriate client etiquette, discipline and presentation</li><li>Ensures that the team conducts effective administration, including vehicle maintenance, equipment husbandry/accountability and reports and returns.</li></ul><p>Operational responsibilities</p><ul><li>Assists in conducting risk assessments and operational planning</li><li>Issues orders to team members and brief clients in line with SOPs when required</li><li>Conducts venue and route recces and produce reports</li><li>Commands the team and issue direction to clients</li><li>Provides emergency medical and primary health</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><h2>Essential</h2><ul><li>Completion of Control Risks recruitment and selection process, including a pass on the HECPO course (may be gained retrospectively)</li><li>Completion of Close Protection course</li><li>Familiarity and comfort with Microsoft Office suite of applications</li><li>Fit and active to work in a hostile environment where there are limited medical facilities</li><li>A minimum of 5 years of military / police experience</li><li>A minimum of 2 years of experience working in a PSD capacity in Iraq</li><li>12 months of commercial APT operational experience in Iraq</li></ul><h2>Preferred</h2><ul><li>Certified training instructor CTTLS, PTLLS or equivalent</li><li>BTEC Ex-military JNCO or equivalent</li><li>Training in leadership skills and performance management</li><li>Knowledge of and exposure to oil and gas sector</li></ul><h2>Qualifications and Specialist Skills</h2><ul><li>If not from a country where English is the official language, the candidate will provide proof (dated within the last 2 years) of language ability based on the TOEFL testing process with score of 110 or above or the IELTS of 8 or above</li><li>Valid SIA Frontline Close Protection License</li><li>Valid certificate for FPOS-I Level 4 and/or FREC Level</li></ul><p></p></section>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<span>
<span></span></span><p>We are looking for the right people — people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world’s largest providers of products and services to the global energy industry.</p><br><b>Job Duties</b> <br><p>Under general supervision:</p><br>
<ul>
<li>The Senior Well Engineering Leader is responsible for more technically complex well designs and process implementation for well proposals, the Well Basis of Design, and Well Operation Programs.</li>
<li>May be responsible for supervising less senior Well Engineers .</li>
<li>Assures technical integrity of Well Operations planning and execution.</li>
<li>Responsible for continuous improvement through lessons learned, timely End-of-Well reports and ensures feedback is incorporated in future operations.</li>
<li>Ensures creation and approval of Approval for Expenditure (AFE) and cost control of operations.</li>
<li>Ensures risk assessments are conducted to assure a safe and environmentally acceptable operation and forecasts and plans medium and long term needs to meet operational requirements.</li>
<li>Coordinates daily morning meetings, anticipates operational changes and needs, and revises plans accordingly.</li>
<li>Evaluates results compared to goals and performance targets.</li>
<li>Ensures engineering studies are performed to solve recurring problems.</li>
<li>Prepares equipment lists and identifies long lead items.</li>
</ul> <p><strong>Additional Role Responsibilities:</strong></p><br>
<p>(1) Ability and flexibility to travel to Iraq both domestically and internationally typically 28/28 days per business required. <br>(2) Project Execution – Responsible for planning, logistics, supervision, and documentation of the execution of well work activities. Work closely with the engineers and Operations Team Managers to make well work decisions/recommendations including selection and optimization of services; materials; fluid systems; operational techniques, operational efficiencies, cost tracking, and management of project risks. Provide input on well programs, including details around HSSE, well control, equipment, contractors, etc. <br>(3) HSSE – Responsible for ensuring HSSE is integrated in the procedure and execution of completion and well intervention operations. Actively promote HSSE and Sustainable Development (SD) in all activities and ensure compliance with business principles. <br>(4) Coaching and Mentoring -- Coach and mentor less experienced team members to deliver best-in-class performance in HSSE, cost, and time. <br>(5) Cost and Time Tracking – Champion and Manager a team of supervisors in tracking well costs and job timing during execution, including differentiating trouble costs/time from expected costs/time. <br>(6) Contract Management – Provide input and suggestions on service contracts to enable high performance. Manage contractor services in the field in line with the contracting strategy and the goals of the contract management team. Support contract management as a contract holder is select cases and participate as a member of the contract management team. Serve as a focal point for HSSE management with the contractors and the evaluation of service quality. <br>(7) Performance Improvement – Responsible for championing operational performance improvement initiatives throughout the well delivery process. Support the implementation of new technologies as part of the performance improvement process. Manager the supervisory team in implementation of opportunities to optimize operations. <br>(8) Communication – Responsible for maintaining communication and <span>managing</span> by example in ensuring integration with production operations and other support departments. </p><br> <br><br><b>Qualifications</b> <br><ul>
<li>Requires an undergraduate degree in STEM, preference in Petroleum or Mechanical Engineering, and 8+ years of well services experience.</li>
<li>Well Supervisory experience and exposure to Multi-discipline operations is preferred.</li>
<li>Must have Well Control Certificate.<br></li>
</ul>
<p><strong>Preferred Experience:</strong><br>Minimum of 10-years relevant experience in their discipline or in an operations environment within the oil & gas industry. </p><br><br><br><br><p><strong>Halliburton is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation</strong>.</p><br> <p><strong><u>Location</u></strong></p><br>
<p>Oils Opertion ST,N°29 Burjesia, Basra, Basrah, 61006, Iraq</p><br> <p><strong><u>Job Details</u></strong></p><br>
<p><strong>Requisition Number:</strong> 211606 <br><strong>Experience Level: </strong>Experienced Hire <br><strong>Job Family:</strong> Engineering/Science/Technology <br><strong>Product Service Line: </strong>Halliburton Project Management <br><strong>Full Time / Part Time: </strong>Full Time</p><br>
<p><strong>Additional Locations for this position: </strong></p><br> <p><u><strong>Compensation Information</strong></u><br>Compensation is competitive and commensurate with experience.</p><br>
</div>