PLC Automation Engineer Jobs in Iraq 2026

Full Time 0 to 0 years Gulf Talnet

Lead Interface Engineer

On-site - Iraq - Basra 20 July 2026

Engineering

<h4>Division</h4> CSSP (Ratawi Hub – Iraq) Direction: IM Situation in organization Within the Project Organization, the Lead Interface Engineer reports to the Interface Manager. Job location(s): CPP Office (Abu Dhabi, UAE) during detailed engineering phase / site (Iraq) during construction phase. <h4>Job dimensions</h4> The Lead Interface Engineer shall assist the Interface Manager on the following: <ul> <li>Take care of the overall management of interface and data changes between stakeholders of the Common Seawater Supply Project, and provide advice on any schedule and commercial issues arising from such interfaces and changes.</li> <li>Ensure that interface management procedures are in place and that EPC and other contractors implement the required interface management system throughout the project duration.</li> </ul> The Lead Interface Engineer is anticipated to start early 2026 and will be based in Abu Dhabi (UAE). <h4>Activities</h4> The job holder shall assist the Interfaces Manager: <ul> <li>With the support of the Project Management Consultant, define, implement and maintain the methodology/procedure to be applied and the corresponding database to be created, to ensure a clear and accurate identification and management of interfaces. This procedure will be as efficient and simple as possible and will be used throughout the life of the project and shall be applied by the different entities/contractors.</li> <li>Management of interface and change data between parties, monitor and control interface and change issues, in order to resolve interface and change issues in a timely and organised manner according to the project interface and change control procedures.</li> <li>Attend major interface meetings, internal and external with other entities of CSSP Project, contractor representatives, vendors, TotalEnergies specialists, partner’s experts, etc. Lead interface and other technical meetings as required.</li> <li>Ensure that HSE requirements are systematically considered all along the interface management process and in particular that interfaces are properly addressed during HAZID/HAZOP/PTR project audits.</li> <li>Consolidate and advise the Project Director and Technical and Project Control Managers of any risks, especially schedule and commercial issues arising from interfaces and changes. Shall be the coordinator of the Management of Change, providing the justification through all disciplines of the change. Ensure complete documentation of all changes, and communication of these in compliance with the processes agreed with BOC and regulatory authorities.</li> <li>Prepare technical papers to support management positions for clarifications or decisions with regulatory authorities of host countries, other entities or partners.</li> <li>Ensure that EPC Contractor implements required interface management system and resources and monitor throughout the project duration that EPC Contractor honours its responsibilities as defined in the project interface procedure.</li> <li>Ensure the implementation of interface changes/optimisations resulting from negotiations of the external interfaces.</li> <li>Together with Project Management Consultant, ensure design consistency and continuity throughout the facilities.</li> <li>Avoid change orders and delays caused by interface issues; ensure timely follow-up of interface issues.</li> <li>Assist the Project Management Consultant, prior to and during construction phase, by anticipating operational interfaces with other parties (clashes or conflicting program).</li> <li>In case of SIMOPS (phased delivery of the plant): propose solutions and participate in definition and resolution.</li> </ul> <h4>Context and environment</h4> Basrah Oil Company (BOC) is undertaking the Seawater Treatment Facilities (STF) project to provide treated seawater to the oil fields in southern Iraq (for injection). The STF will be located on the west side of the Khor Al Zubair, upstream of the port of Umm Qasr and will have the following key components: <ul> <li>Site development and non-process facilities.</li> <li>Ancillaries and buildings.</li> <li>Seawater intake and outfall structures.</li> <li>Material off-loading facility.</li> <li>Seawater clarification, filtration and deoxygenating processes.</li> <li>Chemical addition systems.</li> <li>Shipping pumps.</li> <li>Power generation.</li> <li>Utilities.</li> </ul> FEED was completed (June 2016) with Phase 1 capacity of 7.5 million barrels of water per day (MMBWPD) of treated seawater, with a subsequent Phase 2 of 5 MMBWPD for a total buildout capacity of 12.5 MMBWPD. The project was placed on hold upon the completion of FEED. In 2018 BOC launched a call for tender on the FEED, but instructed bidders to reduce capacity to 5.0 MMBWPD, with provision for a future addition of 2.5 MMBWPD for a total build-out phase of 7.5 MMBWPD. <h4>Accountabilities</h4> Accountable for the interfaces and management of change (MoC), being internal (between units, disciplines, PMT, One Tech and specialists) or external (between other CSSP projects, contractors, company, etc.). The job holder coordinates all interface and MoC matters, protecting the WI Project and company’s position with regards to all external interfaces and to internal interfaces between contractors, and ensuring that changes are evaluated and executed for the overall benefit of the project. Accordingly, the job holder shall make the necessary coordination between all involved contractors/parties and company teams and implement an agreed interface management procedure and methodology. He/she shall ensure the proper and timely follow-up and resolution of interface issues between the various involved parties documents. He/she must support the Interface Manager to ensure full control of the Management of Change process, and shall document all the changes, taking care to perform a full review with various disciplines with project aspects to justify or reject the change. A key aspect of interface coordination is the ability to effectively communicate, across all involved parties, all details related to an interface, including requirements, technical specifications, and potential issues. It is important that the communication channel is promptly established, the proper information is exchanged, and all involved parties acknowledge that they fully understand the interface requirements. The nature of the development might call for a “staged” delivery of the facilities. Simultaneous activities between construction activities and operations activities can occur to meet the agreed schedule. <h4>Qualification</h4> <ul> <li>Degree in engineering.</li> </ul> <h4>Experience</h4> <ul> <li>15 years of relevant experience in industrial projects.</li> <li>A sound multi-discipline technical background complemented by a sound knowledge on onshore surveys campaigns and civil works experience.</li> <li>Very good communication and interpersonal skills and capacity to work in a “transverse” organisation.</li> <li>Mastering English is a must, knowledge of French and Arabic is a plus.</li> </ul>

0 to 0 years Bayt

Lead Process Engineer

On-site - Iraq 17 July 2026

Engineering

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Title: Lead Process Engineer Job Description Position: Lead Process Engineer Company: KBR Project: Majnoon Location: Basra. 28/28 rotation "Belong, Connect, Grow, with KBR! The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals. KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets." Position: Lead Process Engineer Company: KBR Project: Majnoon Location: Basra. 28/28 rotation Job Purpose The Lead Process Engineer will own the technical integrity and successful delivery of process engineering scope across projects at different stages (Conceptual Studies, Front-End Design (FEED), and Detailed Engineering) for oil and gas field developments, including upstream offshore/onshore, gas treating, and downstream processing, in greenfield and brownfield environments. This role leads a team of engineers within a multidisciplinary project team, ensuring compliance with industry standards and project specifications, driving technical excellence, and fostering the development of Iraqi national staff. Job Responsibilities <ul><li>Lead the preparation and review of process simulations and optimization studies for select/appraise stage projects, and champion the development of Process Flow Schemes with heat and mass balances, equipment sizing, layout, etc., for costing and option selection.</li><li>Own the detailed process engineering deliverables across all design phases, including Process Flow Diagrams, Piping & Instrumentation Diagrams, Equipment Datasheets, Study Reports/Manuals, etc., ensuring alignment with international standards and project requirements.</li><li>Oversee the review of process design work by third parties (vendors) and other offices; champion participation in HAZIDs, HAZOPs, SIL, Hazard Analysis reviews, and audits; ensure timely issue resolution and closure.</li><li>Act as the primary technical interface with clients, communicating complex concepts clearly in both written and verbal formats; manage client expectations and confirm technical commitments.</li><li>Mentor and actively develop Iraqi national staff to fulfill process engineering roles, providing structured on-the-job training, performance feedback, and growth opportunities.</li><li>Ensure adherence to office quality and safety systems; lead the implementation of quality assurance/quality control practices within the process discipline.</li><li>Collaborate with other disciplines to drive on-time, efficient, and safe project delivery; lead technical risk management and issue resolution within the process scope.</li><li>Lead the technical supervision of FEED and Detailed Engineering activities for offshore/onshore greenfield/brownfield projects, ensuring design integrity and constructability.</li><li>Support procurement activities by providing authoritative technical input for equipment selection and vendor evaluation, including evaluation of bid technical clarifications.</li><li>Participate in commissioning and start-up activities, providing seasoned technical support and facilitating smooth handover to operations.</li></ul> Functional Responsibilities <ul><li>Maintain and further develop process engineering standards, best practices, and technical governance within the project teams.</li><li>Lead risk assessments and develop comprehensive mitigation strategies for process-related issues; own the risk register for the process discipline.</li><li>Ensure timely delivery of all process engineering deliverables in accordance with project schedules; manage resource planning and workload distribution within the team.</li><li>Provide technical leadership in design reviews, technical compliance, and governance for all process workstreams.</li><li>Support and guide procurement activities with robust technical input for equipment specifications, vendor selection, and qualification.</li><li>Lead commissioning and start-up activities from a process perspective, delivering technical support, commissioning procedures, and start-up readiness reviews.</li></ul> Technical Skills <ul><li>Extensive experience in FEED and Detailed Engineering design for offshore/onshore greenfield/brownfield projects.</li><li>Proficiency in process simulation software (e.g., Aspen HYSYS, Flare System Analyzer, ProMax, Pipesim, Pipenet, others).</li><li>Strong knowledge of process safety management and hazard analysis techniques.</li><li>Familiarity with relevant industry codes and standards (e.g., API, ASME, ISO).</li><li>Experience with process control systems and instrumentation.</li></ul> Soft Skills <ul><li>Leadership and team management skills.</li><li>Strong communication and interpersonal skills.</li><li>Ability to work collaboratively in a multidisciplinary environment.</li><li>Problem-solving mindset with a focus on innovation and efficiency.</li><li>Adaptability to changing project requirements and priorities.</li></ul> Qualifications <ul><li>Mandatory: Bachelor’s degree in engineering (Chemical, Process, or related field).</li><li>Preferred: Master’s degree in engineering (Chemical, Process, or related field) and/or membership of internationally accepted applicable professional Institute.</li><li>10 years of experience in process engineering within engineering Contractors, with a focus on FEED and EPC design for upstream onshore/offshore greenfield/brownfield projects.</li></ul> Work Environment The role will be based in Iraq, requiring collaboration with local and international teams. The work environment is dynamic and fast-paced, necessitating flexibility and a proactive approach to challenges. </div>

0 to 0 years Bayt

Wireline Engineer

On-site - Iraq 14 July 2026

Engineering

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Job Title: Wireline Engineer Location: Iraq  Industry: Oil & Gas  Department: Wireline Services Job Summary The Wireline Engineer is responsible for planning, executing, and supervising wireline operations for oil and gas wells in accordance with company, customer, and HSE standards. The role includes operating wireline equipment, acquiring and validating downhole data, performing perforating and logging services, maintaining operational efficiency, and ensuring safe execution of field activities. Required Qualifications <ul><li>Bachelor's Degree in Engineering Discipline.</li><li>3–10+ years of wireline field experience in oil & gas operations.</li><li>Experience with Open Hole and/or Cased Hole wireline services.</li></ul> With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil & Gas, Power & Renewables, Chemicals, Construction & Infrastructure, Life Sciences, Mining and Manufacturing sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients. </div>

0 to 0 years Bayt

Junior Civil Engineer

On-site - Iraq 22 July 2026

Oil, Gas & Energy

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> We are supporting a leading international Oil & Gas operator in Basra to hire an experienced Wells Civils Data Engineer. This is a unique opportunity to contribute to a long-term, high-impact project, working alongside global experts on one of the region’s most strategic energy developments. With over 1500 workers supporting our clients in Iraq, NES has deep insight into their culture and hiring expectations - allowing us to support candidates effectively throughout the hiring process. Job Description Job Title           :Wells Civils Data Engineer Job Category   :Wells - Drilling, Workover and Well Services Location           :Basra (rotational 14:14 subject to change) Role Summary: The Wells Civils Data Engineer reports directly to the Wells Civils Manager. The role is responsible for all data related to civil scope of works for drilling, workovers and well services in the field. As required, may also be responsible for the correlation and updating QAQC & KPI processes. The role is instrumental in maintaining the wells civil databases, strengthening commitment to excellence, operational compliance and efficiency. Key Responsibilities <ul><li>Compile daily contractor reports and prepare the Wells Civils daily report.</li><li>Prepare and correlate the Monthly Dashboard for publication in Power BI.</li><li>Coordinate training requests, manage approvals, send notifications, and track progress.</li><li>Update the Civils Operations Tracker with daily data entries.</li><li>Oversee the Call Out Cost Tracker, ensuring autonomy and accuracy.</li><li>Prepare call outs, input into the cost tracker and send to Civils Team Leader for signatures</li><li>Prepare & issue completion certificates to the Civils Team Leader for required signatures.</li><li>Maintain document controls for the wells folders to ensure all information is current.</li><li>Carry out additional duties as assigned.</li></ul>Qualifications & Experience: Essential: <ul><li>A minimum of 3 years’ experience in Data Management or a Document Control role within the Oil & Gas industry.</li><li>Demonstrates advanced proficiency in utilizing the Microsoft Office suite of applications.</li><li>Excel expert</li><li>Skilled in MS Project</li><li>English language skills – both written & spoken.</li><li>Arabic Speaker.</li><li>Capable of handling a fast-paced, high-volume work environment with frequent challenges.</li><li>Demonstrated experience in managing dynamic, multi-site operations.</li><li>Strong communicator & team player.</li><li>Attention to detail</li></ul>  Preferred: <ul><li>A bachelor’s degree in Engineering or a technically related subject is desired or analogous discipline (Scientific).</li><li>International experience preferred Middle East onshore.</li></ul> Why This Opportunity Stands Out: • Long-term project stability (many contractors exceed 10 years) • Exposure to a major global operator • Opportunity to work alongside industry-leading professionals Why Apply Through NES? NES is the world’s leading engineering staffing provider, operating across Oil & Gas, Power, Life Sciences, and infrastructure sectors. <ul><li>80+ offices across 45 countries</li><li>24,000+ contractors globally and 10,000+ in the Middle East</li><li>Strong regional presence and long-term client partnerships</li></ul> If you find this opportunity matching your skills or if you know someone suitable for the role, please drop your CV on sayali.kothmire@nesfircroft.com With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil & Gas, Power & Renewables, Chemicals, Construction & Infrastructure, Life Sciences, Mining and Manufacturing sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients. </div>

0 to 0 years Bayt

Lead Project Completion Engineer

On-site - Iraq 27 June 2026

Information Technology

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> We are supporting a leading international Oil & Gas company in to hire an experienced Project Completion Lead Engineer. This is a unique opportunity to contribute to a high-impact project, working alongside global experts on one of the region’s most strategic energy developments. NES has deep insight into their culture and hiring expectations - allowing us to support candidates effectively throughout the hiring process. Job Description<ul><li>Role- Project Completion Lead Engineer.</li><li>Location: Al-Anbar Governate, Iraq </li><li>Work Pattern: Rotation– 6 weeks on 3 weeks off</li><li>Daily pay rate </li><li>Verbal and written communication in English is mandatory</li></ul>Why This Opportunity Stands Out<ul><li>End-to-End Project Ownership</li><li>Strategic Impact on Project Success</li><li>Specialized Expertise in CCMS</li><li>Cross-Functional Leadership Exposure</li><li>Data & Digital Systems Leadership</li><li>High Responsibility in Final Project Delivery</li></ul>Must-Have Requirements 10–15 years of experience in:<ul><li>Project completions</li><li>Commissioning systems</li><li>Database management (CCMS/Maximo)</li></ul>Engineering Degree or Diploma (Mechanical / Electrical / Instrumentation / relevant discipline) Why Apply Through NES? NES is the world’s leading engineering staffing provider, operating across Oil & Gas, Power, Life Sciences, and infrastructure sectors. 80+ offices across 45 countries 24,000+ contractors globally and 10,000+ in the Middle East Strong regional presence and long-term client partnerships With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil & Gas, Power & Renewables, Chemicals, Construction & Infrastructure, Life Sciences, Mining and Manufacturing sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients. </div>

0 to 0 years Bayt

Process Engineer

On-site - Iraq 22 July 2026

Research & Development

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Title: Process Engineer (Local Talent) "Belong, Connect, Grow, with KBR! The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals. KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets." Position title: Process Engineer Position status: Local Talent Position reports to: Lead- Operation Support & Process Department: O&M Support Rotation pattern: 28/28 Job purpose Responsible for the process design, operation and implementation, improve industrial processes in order to maintain efficiency, reduce cost, improve sustainability and maximize profitability. Duties and responsibilities <ul><li>Develop, configure and optimize industrial processes from inception through to start up and certification</li><li>Assess processes, take measurements and interpret data</li><li>Design, run, test and upgrade systems and processes</li><li>Develop best practices, routines and innovative solutions to improve production rates and quality of output</li><li>Perform process simulations</li><li>Manage cost and time constraints</li><li>Provide technical assurance to unit operations and ensure production plan delivery</li><li>Provide process documentation and operating instructions</li><li>Participate timely completion of Management of Change work (MOCs, medium to long term).</li><li>Utilise and perform maintenance of standardized monitoring tools to perform unit monitoring (Spreadsheets, or data historians like PI Process Book, etc).</li><li>Participate in special projects as required</li><li>Support Senior Operation Support Engineer as required</li><li>Consult technical specialist teams as required</li><li>Facilitate/ Pparticipate in HAZOP studies, and other safeguarding reviews</li><li>Utilize structured problem-solving techniques as appropriate: option analysis, RCA, etc</li><li>Ensure compliance with engineering related regulations and Shell standards</li><li>Promote and support compliance to Operating Integrity</li><li>Provide input into and support for the Integrated Activity Plan</li><li>Support Operations Reliability Improvement Process to ensure timely and appropriate corrective action has been taken to ensure repeat failures are eliminated</li></ul> Qualification & Training requirements <ul><li>BSc. Degree in one of chemical or petrochemical engineering department.</li></ul>Experience <ul><li>A minimum of 5 years of proven working experience in Process Engineering.</li><li>Experience in process simulations, with working knowledge of process engineering software packages and Knowledge of process related standards.</li><li>Experience in different process industry, either upstream, downstream, gas plants or with engineering and construction major contractors.</li></ul>Language proficiency, computer and software skills <ul><li>Advanced knowledge of MS Office Advance</li><li>Honey well Unisim Intermediate </li><li>PipeSim Intermediate</li><li>Instrument Calc. tool Intermediate</li><li>PI Process Book Intermediate</li><li>English - Speaking, Writing and reading Intermediate</li></ul> Skills <ul><li>Reading and updating process documents</li><li>Presentation skills</li><li>Problem Solving</li><li>Report Writing</li><li>Communication skills</li></ul> </div>

0 to 0 years Naukri Gulf

Operations Engineer Assistant

On-site - Iraq - Baghdad 2 July 2026

Engineering

<section>Job DescriptionRoles & Responsibilities<div class="paragraph">Job Description <div> Role Summary We are seeking a highly motivated and detail-oriented Engineer Assistant to join the talabat mart (tMart) Operations team. In this role, you will serve as the core technical focal point handling dark store expansion details, layouts, procurement documentation, and day-to-day facility maintenance tracking. You will play a pivotal role in designing store layout developments, drafting construction-related technical documents, and supervising third-party contractors across civil, electrical, and piping disciplines to ensure our rapid grocery fulfillment infrastructure operates seamlessly. What s On Your Plate? Expansion & Layout Development: <ul> <li> Technical Expansion Focal Point: Serve as the primary point of contact for all technical expansion details, collaborating with stakeholders to translate dark store requirements into actionable site project scopes. </li> <li> Layout Development & Enhancement: Develop initial store layouts and propose layout enhancements to maximize space utilization. </li> </ul> Procurement & Technical Documentation: <ul> <li> Construction BOQ & SOW: Formulate comprehensive Bills of Quantities (BOQs) and Scopes of Work (SOWs) for new store construction, physical expansions, and facility remodeling. </li> <li> Needs-Based Engineering Packages: Directly evaluate operational store needs and build tailored technical procurement packages for hardware, layout fixtures, and physical infrastructure upgrades. </li> </ul> Facilities Maintenance & Contractor Supervision: <ul> <li> Multidisciplinary Maintenance Tracking: Proactively identify, prioritize, and log maintenance needs across electrical networks, civil/structural store components, and water/refrigeration piping systems. </li> <li> Schedules & Lifecycle Management: Establish, coordinate, and monitor preventive maintenance schedules to minimize store downtime and prevent asset degradation. </li> <li> On-Site Contractor Management: Serve as the main point of contact dealing with civil, electrical, HVAC and piping contractors, suppliers, and external service providers during installations or repair works. </li> <li> Supervision & Asset Handover: Actively supervise contractor execution on-site, enforcing quality control, adherence to SOW guidelines, and directing final receiving or asset handover back to store operations.</li></ul></div></div></section><section>Desired Candidate ProfileQualifications <div> <ul> <li> Education & Experience: Diploma or Bachelor s degree in Civil, Electrical, Mechanical, or Industrial Engineering, Architecture, or a highly related technical field. Minimum of 1 2 years of practical experience in site coordination, drafting, facilities maintenance, or an engineering assistant capacity. </li> <li> Technical Layout & Project Skills: Proficiency in drafting tools (e.g., AutoCAD or similar layout planning software) with an understanding of commercial or warehousing space optimization. strong foundational knowledge in drafting construction BOQs and SOWs. </li> <li> Contractor & Site Management: Demonstrated experience dealing with or supervising external contractors, vendors, and suppliers across construction trades (civil, electrical, or piping). </li> <li> Core Competencies: Exceptional organizational skills to handle shifting maintenance needs, schedule planning, and technical execution updates across multiple dark store properties simultaneously.</li></ul></div></section>

0 to 0 years Bayt

Lead Process Safety Engineer

On-site - Iraq 10 July 2026

Research & Development

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Job Title: Lead Process Safety Engineer Department / Function: Maintenance & Engineering Duration: 12 months renewable Location: Basra, Iraq Rotation: 28/28 Role Synopsis An outstanding opportunity for a highly motivated individual to join an exciting division. This role will have the opportunity to contribute in a positive way to help build a sustainable future for the client and the people of Iraq. The Lead Process Safety Engineer (LPSE) will be a member of the Central Engineering Team reporting into the Process Safety Team Lead (PSTL). The LPSE will provide deep process safety engineering expertise and judgment in service of the operation and development of the Rumaila field. The LPSE shall work closely with Projects and Area Operations to ensure efficient handover of all issues that require process safety engineering input to resolve. The incumbent is expected to assist the PSTL with the Process Safety programme for the Rumaila Operation and help champion all aspects of good Process Safety management in an aging oilfield. Key Accountabilities <ul><li>Promote a culture of process safety and continuous improvement.</li><li>Assist the PSTL with the nationalisation program and support professional development of Iraqi nationals.</li><li>Provides process safety engineering expertise to support the wider organisation through engineering guidance and by performing and reviewing complex, or non-routine process safety engineering calculations, risk assessment and analyses.</li><li>Provides process safety engineering expertise to EQs, MoCs and Projects including coordination with Production / Operations/ Maintenance staff to identify / prioritise engineering activities.</li><li>Provide assurance on process safety engineering compliance with applicable Standards, Specifications, Codes and Regulations within organisation and 3rd Ensure that non-conformities and temporary deviations are identified and assessed.</li><li>Perform / review risk and consequence analysis and where required coach others on the use of risk analysis and consequence modelling techniques such as QRA, FERA, Explosion Modelling, Fire and Gas Mapping using industry standard software such as PHAST</li><li>Where required facilitate and participate in process safety design reviews and safety studies such as HAZOP and HAZID/ENVID.</li><li>Working knowledge of functional safety concepts and the application of industry standards e.g. IEC61508/11, in design and operational phases.</li><li>Ensures critical process safety documentation and information, e.g. Bowtie diagrams are kept up to date.</li><li>Assists with the reviews of the impact of emerging risks.</li><li>Communicates process safety engineering lessons learned and encourages a culture of sharing experience and continuous improvement.</li><li>Where required, provides process safety engineering expertise in performing incident investigations and defect investigations.</li><li>Provides process safety engineering expertise to delivery of regional actions. Leads on resolution of complex, multi-discipline technical issues where the dominant component is process safety related.</li></ul>Essential Education Degree / diploma qualified engineer or equivalent work experience. BSc, BEng or MEng (UK), BSc (US), or international equivalent in Chemical / Process Engineering or other relevant engineering subject. Professional accreditation, such as Professional Engineer or Chartered Engineer. Essential experience and job requirements At least 15 years industry experience with 5 years in international multicultural operational roles across the full value chain of hydrocarbon and water production facilities. Experience in brownfield operations process safety engineering, reliability, modifications and strong technical leadership with influencing capabilities. An ability to work effectively with other disciplines / teams to understand and assess complex issues and develop pragmatic solutions. Proven ability in practical application of engineering standards and practices for process safety engineering. Candidate to demonstrate familiarity with all relevant industry process safety engineering codes, standards, and practices (API, ASME, ISO etc.), and relevant experience with key process safety engineering tools such as Phast, Bowtie XP, Aspen HYSYS & Flare System Analyser. Desirable criteria and qualifications <ul><li>Key skills include communication, interpersonal relationships, facilitation, influencing, and negotiating across department.</li><li>Ability to develop others and foster diverse relationships in a multicultural environment.</li><li>Ability to identify correct priorities of maintenance and engineering support activities.</li><li>Ability to Identify and assess process safety hazards.</li><li>Ability to speak Arabic would be beneficial but not essential.</li></ul>Other Requirements <ul><li>A passion and relentless drive for continuous improvement.</li><li>Strong use of IT systems to analyse data, and produce reports & KPI’s etc.</li><li>Strong interpersonal skills with experience influencing operating teams and contractors.</li><li>Strong cultural awareness.</li><li>Able to prioritise work in a high activity environment.</li><li>Able to work within a multidisciplinary team.</li><li>Ability to handle multiple tasks with minimal supervision.</li><li>Strong bias for being proactive and getting results.</li><li>Demonstrate planning, organizational and communication skills.</li></ul> With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil & Gas, Power & Renewables, Chemicals, Construction & Infrastructure, Life Sciences, Mining and Manufacturing sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients. </div>

0 to 0 years Bayt

Operations Engineer Assistant

On-site - Iraq 2 July 2026

Engineering

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Company Description Since launching in Kuwait in 2004, talabat, the leading on-demand food and Q-commerce app for everyday deliveries, has been offering convenience and reliability to its customers. talabat’s local roots run deep, offering a real understanding of the needs of the communities we serve in eight countries across the region. We harness innovative technology and knowledge to simplify everyday life for our customers, optimize operations for our restaurants and local shops,  and provide our riders with reliable earning opportunities daily. At talabat, we foster an innovative environment where our talabaty employees can strive to create a positive impact across the region through the use of our platform. Job Description Role Summary We are seeking a highly motivated and detail-oriented Engineer Assistant to join the talabat mart (tMart) Operations team. In this role, you will serve as the core technical focal point handling dark store expansion details, layouts, procurement documentation, and day-to-day facility maintenance tracking. You will play a pivotal role in designing store layout developments, drafting construction-related technical documents, and supervising third-party contractors across civil, electrical, and piping disciplines to ensure our rapid grocery fulfillment infrastructure operates seamlessly. What’s On Your Plate? Expansion & Layout Development: <ul><li>Technical Expansion Focal Point: Serve as the primary point of contact for all technical expansion details, collaborating with stakeholders to translate dark store requirements into actionable site project scopes. </li><li>Layout Development & Enhancement: Develop initial store layouts and propose layout enhancements to maximize space utilization. </li></ul>Procurement & Technical Documentation: <ul><li>Construction BOQ & SOW: Formulate comprehensive Bills of Quantities (BOQs) and Scopes of Work (SOWs) for new store construction, physical expansions, and facility remodeling. </li><li>Needs-Based Engineering Packages: Directly evaluate operational store needs and build tailored technical procurement packages for hardware, layout fixtures, and physical infrastructure upgrades. </li></ul>Facilities Maintenance & Contractor Supervision: <ul><li>Multidisciplinary Maintenance Tracking: Proactively identify, prioritize, and log maintenance needs across electrical networks, civil/structural store components, and water/refrigeration piping systems. </li><li>Schedules & Lifecycle Management: Establish, coordinate, and monitor preventive maintenance schedules to minimize store downtime and prevent asset degradation. </li><li>On-Site Contractor Management: Serve as the main point of contact dealing with civil, electrical, HVAC and piping contractors, suppliers, and external service providers during installations or repair works. </li><li>Supervision & Asset Handover: Actively supervise contractor execution on-site, enforcing quality control, adherence to SOW guidelines, and directing final receiving or asset handover back to store operations. </li></ul> Qualifications <ul><li>Education & Experience: Diploma or Bachelor’s degree in Civil, Electrical, Mechanical, or Industrial Engineering, Architecture, or a highly related technical field. Minimum of 1–2 years of practical experience in site coordination, drafting, facilities maintenance, or an engineering assistant capacity. </li><li>Technical Layout & Project Skills: Proficiency in drafting tools (e.g., AutoCAD or similar layout planning software) with an understanding of commercial or warehousing space optimization.  strong foundational knowledge in drafting construction BOQs and SOWs. </li><li>Contractor & Site Management: Demonstrated experience dealing with or supervising external contractors, vendors, and suppliers across construction trades (civil, electrical, or piping). </li><li>Core Competencies: Exceptional organizational skills to handle shifting maintenance needs, schedule planning, and technical execution updates across multiple dark store properties simultaneously. </li></ul> </div>

0 to 0 years Bayt

Operations Engineer Assistant

On-site - Iraq 2 July 2026

Engineering

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> About the opportunity Role Summary We are seeking a highly motivated and detail-oriented Engineer Assistant to join the talabat mart (tMart) Operations team. In this role, you will serve as the core technical focal point handling dark store expansion details, layouts, procurement documentation, and day-to-day facility maintenance tracking. You will play a pivotal role in designing store layout developments, drafting construction-related technical documents, and supervising third-party contractors across civil, electrical, and piping disciplines to ensure our rapid grocery fulfillment infrastructure operates seamlessly. What’s On Your Plate? Expansion & Layout Development: <ul><li>Technical Expansion Focal Point: Serve as the primary point of contact for all technical expansion details, collaborating with stakeholders to translate dark store requirements into actionable site project scopes. </li><li>Layout Development & Enhancement: Develop initial store layouts and propose layout enhancements to maximize space utilization. </li></ul> Procurement & Technical Documentation: <ul><li>Construction BOQ & SOW: Formulate comprehensive Bills of Quantities (BOQs) and Scopes of Work (SOWs) for new store construction, physical expansions, and facility remodeling. </li><li>Needs-Based Engineering Packages: Directly evaluate operational store needs and build tailored technical procurement packages for hardware, layout fixtures, and physical infrastructure upgrades. </li></ul> Facilities Maintenance & Contractor Supervision: <ul><li>Multidisciplinary Maintenance Tracking: Proactively identify, prioritize, and log maintenance needs across electrical networks, civil/structural store components, and water/refrigeration piping systems. </li><li>Schedules & Lifecycle Management: Establish, coordinate, and monitor preventive maintenance schedules to minimize store downtime and prevent asset degradation. </li><li>On-Site Contractor Management: Serve as the main point of contact dealing with civil, electrical, HVAC and piping contractors, suppliers, and external service providers during installations or repair works. </li><li>Supervision & Asset Handover: Actively supervise contractor execution on-site, enforcing quality control, adherence to SOW guidelines, and directing final receiving or asset handover back to store operations. </li></ul> What you need to be successful <ul><li>Education & Experience: Diploma or Bachelor’s degree in Civil, Electrical, Mechanical, or Industrial Engineering, Architecture, or a highly related technical field. Minimum of 1–2 years of practical experience in site coordination, drafting, facilities maintenance, or an engineering assistant capacity. </li><li>Technical Layout & Project Skills: Proficiency in drafting tools (e.g., AutoCAD or similar layout planning software) with an understanding of commercial or warehousing space optimization. strong foundational knowledge in drafting construction BOQs and SOWs. </li><li>Contractor & Site Management: Demonstrated experience dealing with or supervising external contractors, vendors, and suppliers across construction trades (civil, electrical, or piping). </li><li>Core Competencies: Exceptional organizational skills to handle shifting maintenance needs, schedule planning, and technical execution updates across multiple dark store properties simultaneously. </li></ul> Who we are Since launching in Kuwait in 2004, talabat, the leading on-demand food and Q-commerce app for everyday deliveries, has been offering convenience and reliability to its customers. talabat’s local roots run deep, offering a real understanding of the needs of the communities we serve in eight countries across the region. We harness innovative technology and knowledge to simplify everyday life for our customers, optimize operations for our restaurants and local shops, and provide our riders with reliable earning opportunities daily. At talabat, we foster an innovative environment where our talabaty employees can strive to create a positive impact across the region through the use of our platform. </div>

0 to 0 years Bayt

Lead Interface Engineer

On-site - Iraq 16 July 2026

Information Technology

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Title: Lead Interface Engineer Job Description Division: CSSP (Ratawi Hub – Iraq) Direction : IM Job title: Lead Interface Engineer Situation in organization Within the Project Organization, the Lead Interface Engineer is reporting to the Interface Manager Job Location(s): CPP Office (Abu Dhabi, UAE) during Detailed Engineering Phase / SITE (Iraq) during Construction Phase Job dimensions The Lead Interface Engineer shall assist the Interface Manager on the following: <ul><li>take care of the overall Management of interface and data changes between stakeholders of the Common Seawater Supply Project, and provide advice on any schedule & commercial issues arising from such interfaces and changes</li><li>ensure that Interfaces Management procedures are in place and that EPC and other contractors implement the required interface management system throughout the project duration</li></ul>The Lead Interface Engineer is anticipated to start early 2026 and will be based in Abu Dhabi (UAE). Activities The job holder shall assist the Interfaces Manager: <ul><li>with the support of the Project Management Consultant, define, implement and maintain the methodology/procedure to be applied and the corresponding database to be created, to ensure a clear and accurate identification and management of interfaces. This procedure will be as efficient and simple as possible and will be used throughout the life of the project and shall be applied by the different entities/ Contractors.</li><li>Management of interface and change data between parties, monitor and control interface and change issues, in order to resolve interface and change issues in a timely and organised manner according to the project interface and change control procedures.</li><li>Attend major interface meetings, internal and external with other entities of CSSP Project, Contractor representatives, Vendors, TotalEnergies specialists, Partner’s experts, etc. Lead interface and other technical meetings as required.</li><li>Ensure that HSE requirements are systematically considered all along the interface management process and in particular that interfaces are properly addressed during HAZID/HAZOP/PTR project audits.</li><li>Consolidate and advise the Project Director and Technical and Project Control Managers of any risks specially schedule & commercial issues arising from interfaces and changes. Shall be the coordinator of the Management of Change, providing the justification through all disciplines of the change. Ensure complete documentation of all changes, and communication of these in compliance with the processes agreed with BOC and regulatory authorities.</li><li>Preparing technical papers to support management positions for clarifications / decisions with regulatory authorities of host countries, other entities or partners.</li><li>Ensure that EPC Contractor implements required interface management system & resources and monitor throughout the project duration that EPC Contractor honours its responsibilities as defined in the project interface procedure.</li><li>Ensure the implementation of interface changes/optimisations resulting from negotiations of the external interfaces.</li><li>Together with Project Management Consultant, ensure design consistency and continuity throughout the facilities.</li><li>Avoid change orders and delays caused by interface issues; ensure timely follow-up of interface issues.</li><li>Assist the Project Management Consultant, prior to and during construction phase, by anticipating operational interfaces with other parties (clashes or conflicting program).</li><li>In case of SIMOPS (phased delivery of the plant): propose solutions and participate to definition and resolution.</li></ul>Context and environment Basrah Oil Company (BOC) is undertaking the Seawater Treatment Facilities (STF) project to provide treated seawater to the oil fields in southern Iraq (for injection). The STF will be located on the west side of the Khor Al Zubair, upstream of the port of Umm Qasr and will have the following key components: <ul><li>Site development and non-process facilities.</li><li>Ancillaries and buildings.</li><li>Seawater intake and outfall structures.</li><li>Material off-loading facility.</li><li>Seawater clarification, filtration and deoxygenating processes.</li><li>Chemical addition systems.</li><li>Shipping pumps.</li><li>Power Generation.</li><li>Utilities.</li></ul>FEED was completed (June 2016) with Phase 1 capacity of 7.5 million barrels of water per day (MMBWPD) of treated seawater, with a subsequent Phase 2 of 5 MMBWPD for a total buildout capacity of 12.5 MMBWPD. The project was placed on hold upon the completion of FEED. In 2018 BOC launched a call for tender on the FEED, but instructed bidders to reduce capacity to 5.0 MMBWPD, with provision for a future addition of 2.5 MMBWPD for a total build-out phase of 7.5 MMBWPD. Accountabilities <ul><li>Accountable for the interfaces and MoC, being internal (between units, disciplines, PMT, One Tech and Specialists) or external (between other CSSP Projects, Contractors, COMPANY, etc…). The job holder coordinates all interface and MoC matters, protecting the WI Project and COMPANY’s position with regards to all external interfaces and to internal interfaces between Contractors, and ensuring that changes are evaluated and executed for the overall benefit of the Project.</li><li>Accordingly, the job holder shall make the necessary coordination between all involved Contractors/parties and Company Teams and implement an agreed interface management procedure and methodology. She/He shall ensure the proper and timely follow-up and resolution of interfaces issues between the various involved parties documents. She/He must support the Interface Manager to ensure full control of the Management of Change process, and shall document all the changes, taking care to perform a full review with various disciplines with Project aspects to justify or reject the change.</li><li>A key aspect of interface coordination is the ability to effectively communicate, across all involved parties, all details related to an interface, including requirements, technical specifications, and potential issues. It is important that the communication channel is promptly established, the proper information is exchanged, and all involved parties acknowledge that they fully understand the interface requirements.</li><li>The nature of the development might call for a “staged” delivery of the facilities. Simultaneous activities between construction activities and operations activities can occur to meet the agreed schedule.</li></ul> Qualification: <ul><li>Degree in Engineering</li></ul>Experience: <ul><li>15 years of relevant experience in Industrial Projects.</li><li>A sound multi-discipline technical background complemented by a sound knowledge on Onshore Surveys campaigns and civil works experience.</li><li>Very good communication and interpersonal skills and capacity to work in a “transverse” organisation.</li><li>Mastering English is a must, knowledge of French and Arabic is a plus.</li></ul> </div>

Full Time 0 to 0 years Naukri Gulf

Mechanical Engineer

On-site - Iraq - Basra 8 July 2026

Engineering

<section>Job DescriptionRoles & Responsibilities<div class="paragraph">The Mechanical Engineer will be based on-site in Basra, Iraq, and will be responsible for supervising and executing mechanical installation works for static and rotary equipment within an EPC oil & gas construction project. The role ensures that all installation activities are performed safely, in compliance with project specifications, approved drawings, international standards, and HSE requirements. The Mechanical Engineer will coordinate closely with construction, QA/QC, piping, commissioning teams, and subcontractors to ensure proper installation, alignment, testing, and timely project delivery while maintaining quality and safety standards throughout the project lifecycle. <ul><li>Supervise installation of static equipment including pressure vessels, heat exchangers, columns, tanks, separators, and other process equipment in accordance with approved drawings and specifications.</li><li>Oversee installation, alignment, and grouting of rotary equipment including pumps, compressors, blowers, and package units as per manufacturer requirements and project standards.</li><li>Monitor piping installation works including supports, fit-up, routing, and hydrotest preparation to ensure compliance with approved isometrics and piping layouts.</li><li>Verify equipment foundation preparation, anchor bolt positioning, and base plate leveling prior to equipment erection.</li><li>Ensure proper execution of cold and hot alignment, shaft alignment, and pre-commissioning mechanical checks for rotating equipment.</li><li>Review mechanical drawings such as GA drawings, P&IDs, isometrics, vendor drawings, and method statements to ensure correct site implementation.</li><li>Coordinate with QA/QC for inspections, material verification, NDT requirements, hydrostatic testing, and mechanical completion documentation.</li><li>Interface with other disciplines including E&I and civil teams to ensure proper coordination of mechanical installations.</li><li>Ensure compliance with international standards such as ASME, API, and project technical specifications.</li><li>Support pre-commissioning and commissioning activities including flushing, leak testing, mechanical run tests, and system handover to operations.</li><li>Participate in daily progress meetings, monitor subcontractor performance, and report progress to the Construction Manager.</li><li>Ensure strict adherence to HSE regulations, conduct risk assessments, and ensure safe mechanical lifting, rigging, and installation activities on site. </li></ul></div></section><section>Desired Candidate Profile<ul><li>Bachelor's degree in Mechanical Engineering or a related field.</li><li>Good knowledge in mechanical engineering principles, particularly in the oil and gas sector.</li><li>Knowledge of the design and process of oil and gas plants</li><li>Understanding of maintenance and troubleshooting techniques of equipment involved in field services and EPC operations.</li><li>Strong analytical and problem-solving skills.</li><li>Effective communication and teamwork abilities.</li><li>Ability to learn quickly and adapt to new tools and technologies.</li><li>Familiarity with industry standards and safety regulations is an advantage.</li><li>7-10 years experience in static, rotary equipment installation.</li><li>Knowledge of piping and general mechanical works.</li></ul></section>

20 to 25 years Naukri Gulf

Senior Process Safety Engineer

On-site - Iraq - Iraq 22 July 2026

Engineering

Requirements & Summary<ul><li>Skills : Process Management , Process Engineer</li><li>Other Skills : Process Safety Engineer, Safety Engineer, QAR, RAM, FEED, detailed design, safety-critical systems, process safety and risk management</li><li>Experience : 20 + Years</li><li>Education : Bachelors/3-5 yr Degree</li><li>Employment Type : Full Time Salaried Employee</li><li>Location : Iraq, Iraq</li></ul>Qualifications and Experience<ul><li>Education: Bachelor degree and above in Chemical Engineering or related discipline.</li><li>Experience: Minimum 20 years of experience in process safety and risk management for large oil, gas, or refining projects.</li><li>Technical Background: Strong expertise in process safety studies, QRA, RAM, safety-critical systems, and international safety standards.</li></ul>Competencies:<ul><li>Ability to integrate safety across disciplines and project phases</li><li>Strong analytical and risk assessment skills</li><li>Experience in multi-contractor project environments</li></ul>The Senior Process Safety Engineer is responsible for the governance and management of all process safety, risk management, and loss prevention activities throughout the full lifecycle of the integrated project. Acting on behalf of the Owner within the PMT, this role ensures that safety considerations are embedded in site selection, layout development, FEED, detailed design, construction, commissioning, and start-up. The Senior Process Safety Engineer oversees all safety studies, risk assessments, and safety-related design reviews, and ensures alignment with international standards, regulatory requirements, and Owner safety philosophy. The role includes oversight of PMC safety resources and coordination of safety inputs across all contractors and licensors.Desired Candidate Profile<ul><li>Education: Bachelor degree and above in Chemical Engineering or related discipline.</li><li>Experience: Minimum 20 years of experience in process safety and risk management for large oil, gas, or refining projects.</li><li>Technical Background: Strong expertise in process safety studies, QRA, RAM, safety-critical systems, and international safety standards.</li><li>Competencies:</li><ul><li>Ability to integrate safety across disciplines and project phases</li><li>Strong analytical and risk assessment skills</li><li>Experience in multi-contractor project environments</li></ul></ul>

0 to 0 years Bayt

Lead Mechanical Engineer

On-site - Iraq 23 July 2026

Legal

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Title: Lead Mechanical Engineer Lead Mechanical EngineerEFLD35 - Principal Technical Professional - Field Engineering KBR Sustainable Technology Solutions (STS) provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design capabilities, and smart solutions to optimize planned and operating assets.Responsibilities: • Day to day delivery of Mechanical Engineering support for site operations.• Deliver safe and effective operations by managing risks, addressing queries and minor modifications activities.• Collaborates with Central Engineering team to identify and define engineering solutions to reduce risk and grow installed production capacity.• Promotes a culture of open safety reporting and continuous improvement.• Provides immediate front line support for Operations and Maintenance teams to resolve minor issues and escalate more significant issues to the Central Engineering Team.• Ensures asset Mechanical Engineering risks (both static and rotating) are understood, controlled, managed and reduced.• Participates in a variety of asset and project risk assessments• Input into anomaly assessment and resolution plans.• Monitors condition monitoring data and health of static and rotating equipment and associated operating envelopes, recording and investigating all Safe Operating Limit excursions.• Monitors static/rotating equipment KPIs and initiates corrective actions as necessary.• Provides Mechanical support to technical MoCs and Engineering Queries• Acts as technical interface with Projects and Modifications organisation, including development of Statement of Requirements (SOR) and Project Initiation Requests (PIRs) and Decision Support Packages (DSP)• Supports delivery of Production Efficiency Improvement and Defect Elimination processes (including simple investigations for deferrals and vulnerabilities)• Identifies production vulnerabilities and optimization opportunities to support production forecast and grow IPC.• Performs follow-up actions and observations from self-verification checks that are related to Mechanical Engineering• Participates in Start Up Readiness and Assurance Reviews• Provides coaching to junior engineers. Experience, Qualifications & Key Skills• Above 10 Years experience in O&G industry (Preferable with IOC’s direct or contract)• Professional (Chartered) Engineer Preferred• Technical degree in Mechanical Engineering or allied engineering subject.• Experience in previous asset engineering / operations support engineering role• Practical exposure to production facilities• Excellent communication, interpersonal and coaching skills• Strong bias for being proactive and getting results• Excellent IT skills – Office suite, document management, applications for CMMS and Change Management.• Contribute to an environment in which all team members are respected regardless of their individual differences and are motivated to improve both their individual and team contributions to achieve desired business results• Skilled in behavior change management Preferred Qualifications:<ul><li>Certified Professional Engineer</li></ul> Belong. Connect. Grow. with KBR! </div>

0 to 0 years Bayt

Senior Piping Engineer

On-site - Iraq 22 July 2026

Engineering

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Title: Senior Piping Engineer - Materials (Iraq) "Belong, Connect, Grow, with KBR! The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals. KBR provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets." Title: Senior Piping Engineer – Materials Location: Iraq - KBR office 28/28 rotation Job Purpose <ul><li>Define piping design bases, codes, standards, and deliverables to ensure safe, reliable, and cost-effective solutions.</li><li>Single point of contact for Piping deliverables and Activities related to Piping Materials </li><li>Interface with client, Vendor and other stakeholders for successful execution of the project</li><li>Coordinate with multi-disciplinary teams (process, mechanical, civil, electrical, instrumentation) and vendors to ensure integrated piping systems.</li><li>Mentor engineers, drive quality, and ensure schedule adherence for piping deliverables across project phases.</li></ul> Key Responsibilities <ul><li>Develop and review piping design basis, piping material specifications, datasheets, and technical bid evaluations.</li><li>Ensure compliance with applicable codes and standards and project-specific requirements.</li></ul><ul><li>Development of standard deliverables, various datasheets, and requisition packages related to piping.</li><li>Experience in Non-metallic Piping (GRE / HDPE) Procurement and specs.</li><li>Provide in-depth technical support for material selection involving metallic and Non-metallic piping systems.</li><li>Participate in material selection and corrosion review sessions to ensure suitable materials for service conditions.</li><li>Review and approve technical deliverables (isometrics, P&IDs, BOMs, MOC/Change Notes, design change requests, technical queries).</li><li>Demonstrated knowledge of the Material Tracking throughout the project cycle.</li><li>Understand the MOC process and employ effective change management throughout the lifecycle of the project</li><li>Contribute to Lesson Learnt from the Project</li><li>Report to Department Manager/ Lead Engineer for the project.</li></ul> Experience <ul><li>12+ years of experience in Concept, FEED and Detail Engineering and EPCM experience in the Oil & Gas industry.</li><li>Experience in Middle East clients like ADNOC, BP, BOC, PDO, Total Energies & Qatar Energies others are highly preferred.</li><li>Familiarity of Onshore and Offshore facilities and carried out Greenfield and Brownfield Projects.</li><li>Experience in working with multicultural project teams across the various project execution center’s</li><li>Familiarity with international piping codes and standards such as ASME B31.3, ASTM, API, and NACE MR0175/ISO 15156.</li></ul> Qualifications <ul><li>Master or Bachelor of Engineering in a related field.</li><li>Professional membership or relevant certifications (e.g., PE/Chartered Engineer) are a plus.</li><li>Certification related to piping design or stress analysis is advantageous.</li></ul> Technical Skills <ul><li>Strong background in piping design, engineering, stress analysis, and support design.</li><li>Proficiency with piping design software and calculation tools (e.g., CAESAR, AutoPIPE and 3D modeling tools).</li><li>Technical experience to prepare manhours estimation for different types of piping activities & deliverables of different phases of the project like Select phase, FEED & Execution etc.</li><li>Familiarity with codes, standards, regulations and practices applicable to the design and construction of Various facilities.</li><li>Hands on knowledge of codes and standards relevant to piping.</li><li>Experience with high-pressure piping, thermal insulation, coatings, and corrosion considerations.</li><li>Diverse working experience in project management, conceptual, FEED and detailed design, and construction.</li><li>Knowledge of Interdisciplinary Work Processes/Interface/Deliverables</li><li>Responsible for the training and development of engineers in his/her Team.</li><li>Adherence to company processes and procedures and handle internal and external project audits.</li><li>Proven experience in vendor qualification, technical bid evaluation, and factory audits.</li></ul> Soft Skills <ul><li>Communication: Clear, concise communication with technical and non-technical stakeholders.</li><li>Problem Solving: Proactive identification and mitigation of piping-related risks.</li><li>Project Management: Planning, scheduling, risk management, and deliverable tracking.</li><li>Influence & Collaboration: Effective collaboration with clients, vendors, and internal teams.</li><li>Adaptability: Comfort in dynamic project environments and changing technical requirements.</li><li>Attention to Detail: Rigorous approach to reviews, calculations, and documentation.</li><li>Safety Mindset: Commitment to health, safety, and environment (HSE) standards.</li><li>Critical Thinking: Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems</li></ul> </div>

Full Time 0 to 0 years Gulf Talnet

Water Injection Engineer

On-site - Iraq - Iraq 20 July 2026

Engineering

The Water Injection Engineer will be responsible for designing, developing, and optimizing water injection systems to support enhanced oil recovery (EOR) and reservoir pressure maintenance. The role includes conducting hydraulic analysis and simulation modeling, monitoring system performance, optimizing injection efficiency, preparing engineering documentation, supporting commissioning and start-up activities, and ensuring compliance with HSE, environmental, and industry standards. The successful candidate will work closely with reservoir, production, and operations teams to improve field performance and mentor junior engineers.Bachelor's degree in Petroleum Engineering, Chemical Engineering, Mechanical Engineering, or a related engineering discipline; a Master's degree is an advantage. Minimum of 10 years of experience in water injection engineering within the Oil & Gas industry. Strong expertise in enhanced oil recovery (EOR), reservoir pressure maintenance, hydraulic analysis, water treatment systems, pipeline hydraulics, and injection well performance. Proficient in Aspen HYSYS, PIPEPHASE, OLGA, or equivalent simulation software. Excellent analytical, project management, communication, and troubleshooting skills. Professional Engineer (PE) registration or equivalent certification is preferred.

Full Time 0 to 0 years Gulf Talnet

Water Injection Engineer

On-site - Iraq - Iraq 20 July 2026

Engineering

0 to 0 years Bayt

Operations & Performance Admin Engineer

On-site - Iraq 30 June 2026

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> About the opportunity Role Summary We are seeking a versatile and highly organized Operations & Performance Admin Engineer to join the talabat mart (tMart) team. This hybrid role bridges technical facilities management with data-driven operational performance administration. On the engineering side, you will oversee the maintenance, procurement support, and supplier supervision for dark store facilities, ensuring critical infrastructure like cold chain systems (chillers/freezers) and electrical networks remain fully operational. On the administration side, you will dedicate focus to monitoring, tracking, and reporting the operational health of the dark stores, reviewing ground-level efficiency metrics, and delivering structured compliance dashboards to ensure seamless 30-minute delivery execution. What’s On Your Plate? Engineering & Facilities Management: <ul><li>Infrastructure Maintenance: Proactively identify, diagnose, and manage the maintenance and repair needs of essential store infrastructure, including industrial chillers, freezers, HVAC/AC systems, electrical distribution networks, and general facilities. </li><li>Procurement Documentation: Formulate highly accurate and detailed Scope of Work (SOW) documents and Bill of Quantities (BOQ) for new equipment purchases, facility upgrades, and engineering services. </li><li>Supplier Supervision: Supervise on-site third-party contractors and service providers during engineering installations, routine maintenance, and emergency repairs, enforcing strict quality and safety standards. </li><li>Handover & Receiving: Conduct technical inspections and serve as the final authority for the formal receiving and handover of newly executed engineering projects, facilities, or physical assets. </li></ul>Performance Administration: <ul><li>Real-Time Order Flow Monitoring: Maintain a regular order-flow monitoring schedule on the Shopper platform, and actively inform the relevant store team via communication groups in case of any delays in assigning or preparing orders. </li><li>Nightly Sales Tracking: Create and publish structured sales update tables every night at 7:00 PM, 9:00 PM, 11:00 PM, and 12:15 AM to keep the team informed on performance milestones. </li><li>Picker Performance Analytics: Check picker performance at the granular order level, calculate efficiency averages, and prepare comprehensive reports to help team leaders optimize speed and accuracy. </li><li>Customer Feedback Administration: Follow up with the account advisor to aggregate, categorize, and report back on direct customer feedback to identify service delivery bottlenecks. </li><li>Operational Sheet Management: Maintain and systematically update the central operations Google Sheet for all immediate store-level updates, operational tracking parameters, and system notifications. </li><li>In-App Quality Control Audits: Perform weekly systematic audits of images on the talabat App, flagging discrepancies, and proactively uploading missing visual assets to guarantee catalog completeness. </li><li>Barcode Error Tracking: Identify and log non-working barcodes using the specialized operations tracking sheet to minimize order picking delays. </li><li>Store Invoice & Compliance Audits: Monitor, track, and verify the physical and digital invoices uploaded directly by the store branches to ensure operational data integrity. </li></ul> What you need to be successful <ul><li>Education & Experience: Bachelor’s degree in Mechanical, Electrical, or Industrial Engineering, or a highly related technical field, combined with at least 3+ years of experience across data tracking, performance reporting, facilities engineering, or administrative operations. </li><li>Technical Facility Skills: Strong hands-on or supervisory experience identifying maintenance needs for commercial refrigeration (chillers/freezers), HVAC networks, and electrical systems. Proven ability to draft professional SOW and BOQ documents. </li><li>Analytical & Tooling Proficiency: Highly data-oriented and structured, with an advanced proficiency in Google Sheets/Excel. Comfortable managing high-volume operational dashboards and catching subtle metric anomalies. </li><li>Execution & Communication: Strong communication and reporting skills to seamlessly present daily facilities statuses and weekly performance summaries directly to Operations Management. </li></ul> Who we are Since launching in Kuwait in 2004, talabat, the leading on-demand food and Q-commerce app for everyday deliveries, has been offering convenience and reliability to its customers. talabat’s local roots run deep, offering a real understanding of the needs of the communities we serve in eight countries across the region. We harness innovative technology and knowledge to simplify everyday life for our customers, optimize operations for our restaurants and local shops, and provide our riders with reliable earning opportunities daily. At talabat, we foster an innovative environment where our talabaty employees can strive to create a positive impact across the region through the use of our platform. </div>

20 to 25 years Naukri Gulf

Senior Interface Engineer

On-site - Iraq - Iraq 22 July 2026

Engineering

Skills : Project EngineerOther Skills : Interface Engineer, interface principles, interface management. FEED, EPC, engineering interfaces, interface registers, interface matrices, interface issues, Oil and Gas, PetrochemicalExperience : 20 + YearsEducation : Bachelors/3-5 yr DegreeEmployment Type : Full Time Salaried EmployeeLocation : Iraq, IraqQualifications and ExperienceEducation: Bachelor degree and above in Engineering.Experience: Minimum 20 years of experience in large-scale oil, gas, refining, or petrochemical projects, with extensive exposure to FEED, EPC, and commissioning phases.Competencies:Strong understanding of multidisciplinary engineering interfacesProven ability to manage complex multi-contractor environmentsStrong coordination, negotiation, and conflict resolution skillsExperience working with government authorities and licensorsMust have overseas work experience.Fluent English (capable of using it as the operational language in daily work).Desired Candidate Profile

Full Time 0 to 0 years Gulf Talnet

Electrical Engineer

On-site - Iraq - Iraq 20 July 2026

Information Technology

The Electrical Engineer will be responsible for the design, analysis, and maintenance of high-voltage transmission systems supporting petroleum and gas operations. The role includes leading transmission line projects from concept through commissioning, conducting electrical load analysis, preparing system models, developing technical specifications, ensuring compliance with IEEE, NESC, NEC, and environmental regulations, and coordinating with multidisciplinary engineering teams. The successful candidate will also oversee inspections, mentor engineering staff, and provide technical expertise for transmission system upgrades and expansion projects.Bachelor's degree in Electrical Engineering is required; a Master's degree with a specialization in Power Systems is highly preferred. Candidates must have a minimum of 10 years of electrical engineering experience, including at least 5 years in high-voltage transmission line design, analysis, and maintenance within the oil & gas, petroleum, or energy industry. Proficiency in ETAP, PLS-CADD, AutoCAD, or equivalent electrical engineering software is required. Strong knowledge of IEEE, NESC, and NEC standards, proven leadership skills, excellent communication abilities, and a Professional Engineer (PE) license or equivalent certification are preferred.

PLC Automation Engineer Jobs in Iraq

Lead Interface Engineer

Lead Process Engineer

Wireline Engineer

Junior Civil Engineer

Lead Project Completion Engineer

Process Engineer

Operations Engineer Assistant

Lead Process Safety Engineer

Operations Engineer Assistant

Operations Engineer Assistant

Lead Interface Engineer

Mechanical Engineer

Senior Process Safety Engineer

Lead Mechanical Engineer

Senior Piping Engineer

Water Injection Engineer

Water Injection Engineer

Operations & Performance Admin Engineer

Senior Interface Engineer

Electrical Engineer

Site Owners

Employers

Job Seekers

PLC Automation Engineer Jobs in Iraq

Receive email alerts for PLC Automation Engineer Jobs in Iraq jobs