Radiographer Jobs - Baghdad Iraq

<p>As a CT/X-ray Radiographer (Radiologic Technician), also known as a Radiologic Technologist, you'll perform diagnostic X-ray and computed tomography examinations within an international healthcare environment in Baghdad, Iraq. You'll prepare and position patients, operate imaging equipment, maintain accurate clinical records, and apply radiation protection and infection-control practices throughout each examination.</p><p>Assignment Location: This position is based onsite in Baghdad, Iraq.</p><p>Key Responsibilities</p><ul><li>Perform ordered diagnostic X-ray and CT examinations.</li><li>Prepare and position patients, adjust immobilization devices, and configure imaging equipment and exposure controls.</li><li>Explain imaging procedures, answer patient questions, and document services in patient and departmental records.</li><li>Apply radiation protection techniques, including beam restriction, patient shielding, and appropriate exposure-factor selection.</li><li>Follow infection-control, workplace safety, contrast-reaction, first-aid, and emergency response protocols.</li><li>Participate in required mass-casualty exercises and organizational compliance education.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Completion of an approved radiologic technology program leading to a diploma, certificate, or associate degree; qualifying U.S. military radiology technical-school training; or applicable country-of-record equivalent.</li><li>At least three years of recent experience as a Radiologic Technologist, including at least six months within the past year.</li><li>Current unrestricted professional license and ARRT certification, or applicable country-of-record equivalent.</li><li>Current ARRT CT certification/registration, or applicable country-of-record equivalent.</li><li>Current BLS certification or approved equivalent.</li><li>Proficiency with electronic medical records and Microsoft Office applications.</li><li>Ability to read, write, and speak English effectively.</li><li>Valid passport from your country of record with at least 18 months remaining before expiration; ability to maintain a current passport while in Iraq; ability to obtain and maintain the required security clearance; and ability to relocate to Iraq for the duration of the project.</li><li>Ability to meet pre-assignment physical requirements and perform work involving prolonged sitting and standing, bending, stooping, and lifting up to 25 pounds.</li><li>Preferred Prior experience supporting military, government, or international healthcare environments.</li><li>Current applicable security clearance.</li></ul>

<p>You'll serve as the senior clinical leader for a multidisciplinary healthcare program supporting a diverse workforce in a remote-site healthcare environment. This role combines executive medical leadership with active clinical practice, making it well suited for an experienced physician who values both direct patient care and the opportunity to shape healthcare quality, governance, and operational performance. Working closely with site leadership and clinical teams, you'll oversee medical services across the program while helping ensure safe, compliant, and effective healthcare delivery. You'll guide clinical governance initiatives, support physician and provider performance, and maintain oversight of patient care standards, emergency preparedness, and organizational medical operations.</p><p>Key Responsibilities</p><ul><li>Lead clinical governance, quality improvement, patient safety, infection control, medical record standards, credentialing activities, and emergency preparedness initiatives across the healthcare program.</li><li>Oversee physicians, surgeons, advanced practice providers, dentists, and other medical personnel while providing strategic direction for medical services and physician practice programs.</li><li>Chair the Medical Executive Committee and provide oversight of committees including Pharmacy &amp; Therapeutics, Credentialing and Privileging, Peer Review, and Infection Control, ensuring appropriate reporting, documentation, and follow-through.</li><li>Guide clinical case management, medical referrals, patient movement decisions, and medical evacuation coordination while collaborating with external healthcare partners and medical transport providers.</li><li>Participate in organizational planning, policy development, government stakeholder meetings, audits, operational readiness activities, and business continuity planning from a medical leadership perspective.</li><li>Deliver direct patient care including medical evaluation, triage, diagnosis, treatment of acute, chronic, and emergent conditions, preventive care, annual physicals, immunizations, testing, follow-up care, and clinical documentation.</li><li>Order, perform, and interpret diagnostic testing; prescribe medications and therapies; maintain continuity of care; and ensure accurate, complete medical records.</li><li>Support workforce medical clearance compliance, participate in mass casualty exercises and emergency response activities, and provide liaison support to external healthcare organizations when continuity of care requires coordination.</li></ul><p>This is a role for a physician leader who is ready to balance clinical practice with meaningful responsibility for healthcare quality, governance, and organizational impact.</p><p><strong>Desired Candidate Profile</strong></p><p>MD or DO from an accredited U.S. medical school (or equivalent international institution) with completed residency training in Family Practice, Internal Medicine, or Emergency Medicine. Current unrestricted U.S. physician license; current BLS, ACLS, and ATLS certifications; DEA registration (or equivalent) required. 5+ years of post-residency medical practice experience in the United States and current direct patient care experience, including a minimum of 6 months worked within the last 12 months in the specialty. Ability to provide executive clinical leadership while maintaining active patient care responsibilities in a fast-paced healthcare environment. Ability to relocate internationally for assignment duration; valid passport required and ability to maintain required medical clearances and immunizations.</p><p>Preferred Experience supporting healthcare services within military, international, or government-supported healthcare environments. Experience in remote-site, geographically isolated, or operationally complex healthcare programs.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are seeking a Senior Medical Officer who will Provide clinical care and medical supervision, including 24/7 coverage, and lead and support emergency response and medical evacuations.</p><ul><li>&nbsp;Provide clinical care and medical supervision, including 24/7 medical coverage.</li><li>Lead and support emergency response activities and medical evacuations (MEDEVAC).</li><li>Ensure effective implementation of occupational health programs, policies, and procedures.</li><li>Oversee medical facility readiness, equipment, and emergency preparedness.</li><li>Ensure accurate medical reporting, documentation, and regulatory compliance.</li><li>Develop and implement medical protocols, procedures, and clinical governance practices.</li><li>Contribute to health risk assessments, disease prevention, and employee health programs.</li><li>Deliver medical training, including first aid, emergency response, and health awareness.</li><li>Support site inspections and HSE health-related initiatives.</li><li>Coordinate with local hospitals, medical authorities, emergency services, and healthcare providers.</li></ul><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Requirements</p><ul><li>Medical Doctor (MD) with a valid medical license.</li><li>Minimum 10+ years of experience in emergency, occupational, or remote medicine.</li><li>Strong expertise in emergency medicine and site medical operations.</li><li>Proven experience in MEDEVAC coordination and crisis response.</li><li>Good knowledge of occupational health and public health practices.</li><li>Strong decision-making and problem-solving skills under pressure.</li><li>High level of resilience, adaptability, and ability to work in challenging environments.</li><li>Excellent communication, leadership, and team coordination skills.</li><li>Experience working in remote, industrial, or high-risk environments.</li><li>Exposure to international medical standards, protocols, and practices.</li><li>Fluent in English and Arabic (mandatory).</li><li>French language proficiency is an advantage.&nbsp;</li></ul><p><br></p></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b><i>Your expertise can spark the next breakthrough. Become a Field Medical Advisor at AstraZeneca and turn cutting-edge research into meaningful patient outcomes.</i></b></p><br><p><b>ABOUT ASTRAZENECA</b></p><br><p>AstraZeneca is a global, science-led, patient-focused biopharmaceutical company that focuses on the discovery, development and commercialization of prescription medicines for some of the world’s most serious diseases. But we’re more than one of the world’s leading pharmaceutical companies.</p><br><p>Join a high-performing team, empowered to cut through the noise and drive real change. Our agility and pace, coupled with scientific focus, powers us to spot opportunities in the market that keep us moving forward and into new spaces.</p><br><p><b>Why AstraZeneca?</b></p><br><p>At AstraZeneca we’re dedicated to being a Great Place to Work. Where you are empowered to push the boundaries of science and unleash your entrepreneurial spirit. There’s no better place to make a difference to medicine, patients and society. An inclusive culture that champions diversity and collaboration, and always committed to lifelong learning, growth and development. We’re on an exciting journey to pioneer the future of healthcare.</p><br><p><b>ABOUT THE ROLE</b></p><br><p><b>Job Purpose:</b></p><br><p>As a Field Medical Advisor, you will execute the Medical Affairs Plan for assigned therapeutic area(s), providing scientific support for AstraZeneca products while building scientific partnerships with Healthcare Professionals (HCPs) and Key External Experts (KEEs). You will contribute to the implementation of the medical strategy through scientific exchange, stakeholder engagement, evidence generation, and actionable medical insights that enhance patient care and support the adoption of innovative medicines.</p><br><p><b>Key Responsibilities:</b></p><br><ul><li>Engage in scientific exchange with Healthcare Professionals (HCPs), Key External Experts (KEEs), and other relevant stakeholders in line with medical objectives.</li><li>Maintain deep clinical and scientific expertise in the disease area, AstraZeneca products, emerging therapies, and the competitive landscape.</li><li>Build and maintain scientific relationships with HCPs, KEEs, healthcare institutions, and other key stakeholders to support ongoing scientific dialogue.</li><li>Support the development and execution of the Field Medical Strategic Plan and provide scientific support to internal and external stakeholders.</li><li>Organize and facilitate scientific meetings, symposiums, advisory boards, and other non-promotional medical activities.</li><li>Support evidence-generation activities, including clinical studies, investigator-sponsored research, publications, and collaborations with Clinical Research Operations.</li><li>Gather and communicate actionable insights from the external medical environment to inform medical, product, and clinical development strategies.</li><li>Support patient access by aligning scientific engagement with medical strategy, patient journey needs, and healthcare system priorities.</li><li>Leverage digital tools and innovative approaches to enable scientific exchange and patient-centric solutions.</li><li>Ensure compliance with AstraZeneca standards, applicable regulations, and pharmacovigilance requirements in all medical activities.</li></ul><p><b>Job Requirements:</b></p><br><p><b><u>Essential Criteria:</u></b></p><br><ul><li>Medical Doctor (MD) or Pharmacist.</li><li>3+ years of experience in a similar role in Medical Affairs, within a multinational pharmaceutical company.</li><li>Experience in specialty lines (e.g., Oncology, Hematology, Rare Disease, Metabolic Diseases).</li><li>Proven stakeholder-management track record with KOLs, HCPs, and cross-functional partners.</li><li>Strong expertise in stakeholder engagement and relationship management with HCPs and KOLs.</li><li>Demonstrated ability in project management and cross-functional collaboration.</li><li>Excellent scientific knowledge, presentation, and communication skills.</li><li>Flexibility to travel as business needs require.</li><li>Experience working directly with a brand-owning company (not solely through a distributor) or, if working with a distributor, clear evidence of close collaboration with the parent/mother company.</li></ul><p><b><u>Preferred Criteria:</u></b></p><br><ul><li>Post-graduate degree (e.g., MSc, PhD) in a relevant scientific or medical discipline.</li><li>Experience in account management.</li></ul><p><b><i>Please note that this position is based in Baghdad and is not open for relocation; only apply if you are located in or can easily access this location.</i></b></p><br><p><b>Date Posted</b></p><br>02-Aug-2026<p><b>Closing Date</b></p><br>08-Aug-2026<p>AstraZeneca embraces diversity and equality of opportunity. &nbsp;We are committed to building an inclusive and diverse team representing all backgrounds, with as wide a range of perspectives as possible, and harnessing industry-leading skills. &nbsp;We believe that the more inclusive we are, the better our work will be. &nbsp;We welcome and consider applications to join our team from all qualified candidates, regardless of their characteristics. &nbsp;We comply with all applicable laws and regulations on non-discrimination in employment (and recruitment), as well as work authorization and employment eligibility verification requirements.</p><br> </div>

<p>ROLE PURPOSE: Promotion of Aspen products to health care professionals in assigned territory including building relations with HCPs, delivering the Key brands marketing messages and achieve sales targets.</p><p>RESPONSIBILITIES: Represent Aspen through achieving daily targeted Face to Face calls to physicians and pharmacists. Regularly Conducting AVAs &amp; promotional activities. Achieve assigned Sales Targets in the designated territory. Build sustainable positive relationships with target HCPs and Key stakeholders in assigned territory. Coach and support the South team in their day-to-day working activities. Maintain updated customer database. Timely Submission of Daily Calls Report &amp; Weekly Sales Trackers. Keeping up to date with the latest clinical data in the related therapy area, presenting and discussing this data with healthcare professionals. To provide accurate and complete market feedback on: competition, new product concepts, and customer requirements as well as marketing opportunities Planning and execution of medical educational events. Conduct ongoing market analysis. Support FLSM and Carry out Market Access assignments in Tender and Retail Institutions. Coaching New joiners on Day to Day working Activities.</p><p><strong>Desired Candidate Profile</strong></p><p>EDUCATION QUALIFICATION AND EXPERIENCE: Bachelor Degree in B.Sc pharmacy +3 Years in Pharmaceutical Sales TECHNICAL SKILLS: Selling Skills/Presentation Skills - Professional KEY ATTRIBUTES: Market Knowledge Flexibility and tolerance for ambiguity Technical /Professional skills Consumer relevancy Capacity for and resistance to stress Industry knowledge Problem solving Active listening Curiosity/learning agility Information seeking Informal communication skills ASPEN COMPETENCIES: BUSINESS Foster Consumer &amp; Customer Commitment Makes Good Decision PEOPLE Communicate Effectively Dealing with ambiguity/Embrace change SELF Continuously Grow &amp; Develop Contribute Special Expertise</p>

<p>ROLE PURPOSE: Promotion of Aspen products to health care professionals in assigned territory including building relations with HCPs, delivering the Key brands marketing messages and achieve sales targets. RESPONSIBILITIES: Represent Aspen through achieving daily targeted Face to Face calls to physicians and pharmacists. Regularly Conducting AVAs &amp; promotional activities. Achieve assigned Sales Targets in the designated territory. Build sustainable positive relationships with target HCPs and Key stakeholders in assigned territory. Coach and support the South team in their day-to-day working activities. Maintain updated customer database. Timely Submission of Daily Calls Report &amp; Weekly Sales Trackers. Keeping up to date with the latest clinical data in the related therapy area, presenting and discussing this data with healthcare professionals. To provide accurate and complete market feedback on: competition, new product concepts, and customer requirements as well as marketing opportunities Planning and execution of medical educational events. Conduct ongoing market analysis. Support FLSM and Carry out Market Access assignments in Tender and Retail Institutions. Coaching New joiners on Day to Day working Activities.</p><p><strong>Desired Candidate Profile</strong></p><p>EDUCATION QUALIFICATION AND EXPERIENCE: Bachelor Degree in B.Sc pharmacy +3 Years in Pharmaceutical Sales TECHNICAL SKILLS: Selling Skills/Presentation Skills - Professional KEY ATTRIBUTES: Market Knowledge Flexibility and tolerance for ambiguity Technical /Professional skills Consumer relevancy Capacity for and resistance to stress Industry knowledge Problem solving Active listening Curiosity/learning agility Information seeking Informal communication skills ASPEN COMPETENCIES: BUSINESS Foster Consumer &amp; Customer Commitment Makes Good Decision PEOPLE Communicate Effectively Dealing with ambiguity/Embrace change SELF Continuously Grow &amp; Develop Contribute Special Expertise</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><b>ROLE PURPOSE:</b> Promotion of Aspen products to health care professionals in assigned territory including building relations with HCPs, delivering the Key brands marketing messages and achieve sales targets. RESPONSIBILITIES: Represent Aspen through achieving daily targeted Face to Face calls to physicians and pharmacists. Regularly Conducting AVAs &amp; promotional activities. Achieve assigned Sales Targets in the designated territory. Build sustainable positive relationships with target HCPs and Key stakeholders in assigned territory. Coach and support the South team in their day-to-day working activities. Maintain updated customer database. Timely Submission of Daily Calls Report &amp; Weekly Sales Trackers. Keeping up to date with the latest clinical data in the related therapy area, presenting and discussing this data with healthcare professionals. To provide accurate and complete market feedback on: competition, new product concepts, and customer requirements as well as marketing opportunities Planning and execution of medical educational events. Conduct ongoing market analysis. Support FLSM and Carry out Market Access assignments in Tender and Retail Institutions. Coaching New joiners on Day to Day working Activities.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><b>EDUCATION QUALIFICATION AND EXPERIENC</b>E: Bachelor Degree in B.Sc pharmacy +3 Years in Pharmaceutical Sales TECHNICAL SKILLS: Selling Skills/Presentation Skills - Professional KEY ATTRIBUTES: Market Knowledge Flexibility and tolerance for ambiguity Technical /Professional skills Consumer relevancy Capacity for and resistance to stress Industry knowledge Problem solving Active listening Curiosity/learning agility Information seeking Informal communication skills ASPEN COMPETENCIES: BUSINESS Foster Consumer &amp; Customer Commitment Makes Good Decision PEOPLE Communicate Effectively Dealing with ambiguity/Embrace change SELF Continuously Grow &amp; Develop Contribute Special Expertise</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>ROLE PURPOSE: Promotion of Aspen products to health care professionals in assigned territory including building relations with HCPs, delivering the Key brands marketing messages and achieve sales targets. RESPONSIBILITIES: Represent Aspen through achieving daily targeted Face to Face calls to physicians and pharmacists. Regularly Conducting AVAs &amp; promotional activities. Achieve assigned Sales Targets in the designated territory. Build sustainable positive relationships with target HCPs and Key stakeholders in assigned territory. Coach and support the South team in their day-to-day working activities. Maintain updated customer database. Timely Submission of Daily Calls Report &amp; Weekly Sales Trackers. Keeping up to date with the latest clinical data in the related therapy area, presenting and discussing this data with healthcare professionals. To provide accurate and complete market feedback on: competition, new product concepts, and customer requirements as well as marketing opportunities Planning and execution of medical educational events. Conduct ongoing market analysis. Support FLSM and Carry out Market Access assignments in Tender and Retail Institutions. Coaching New joiners on Day to Day working Activities.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>EDUCATION QUALIFICATION AND EXPERIENCE: Bachelor Degree in B.Sc pharmacy +3 Years in Pharmaceutical Sales TECHNICAL SKILLS: Selling Skills/Presentation Skills - Professional KEY ATTRIBUTES: Market Knowledge Flexibility and tolerance for ambiguity Technical /Professional skills Consumer relevancy Capacity for and resistance to stress Industry knowledge Problem solving Active listening Curiosity/learning agility Information seeking Informal communication skills ASPEN COMPETENCIES: BUSINESS Foster Consumer &amp; Customer Commitment Makes Good Decision PEOPLE Communicate Effectively Dealing with ambiguity/Embrace change SELF Continuously Grow &amp; Develop Contribute Special Expertise</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Description</p><p>ROLE PURPOSE: Promotion of Aspen products to health care professionals in assigned territory including building relations with HCPs, delivering the Key brands marketing messages and achieve sales targets. RESPONSIBILITIES: Represent Aspen through achieving daily targeted Face to Face calls to physicians and pharmacists. Regularly Conducting AVAs &amp; promotional activities. Achieve assigned Sales Targets in the designated territory. Build sustainable positive relationships with target HCPs and Key stakeholders in assigned territory. Coach and support the South team in their day-to-day working activities. Maintain updated customer database. Timely Submission of Daily Calls Report &amp; Weekly Sales Trackers. Keeping up to date with the latest clinical data in the related therapy area, presenting and discussing this data with healthcare professionals. To provide accurate and complete market feedback on: competition, new product concepts, and customer requirements as well as marketing opportunities Planning and execution of medical educational events. Conduct ongoing market analysis. Support FLSM and Carry out Market Access assignments in Tender and Retail Institutions. Coaching New joiners on Day to Day working Activities.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>EDUCATION QUALIFICATION AND EXPERIENCE: Bachelor Degree in B.Sc pharmacy +3 Years in Pharmaceutical Sales TECHNICAL SKILLS: Selling Skills/Presentation Skills - Professional KEY ATTRIBUTES: Market Knowledge Flexibility and tolerance for ambiguity Technical /Professional skills Consumer relevancy Capacity for and resistance to stress Industry knowledge Problem solving Active listening Curiosity/learning agility Information seeking Informal communication skills ASPEN COMPETENCIES: BUSINESS Foster Consumer &amp; Customer Commitment Makes Good Decision PEOPLE Communicate Effectively Dealing with ambiguity/Embrace change SELF Continuously Grow &amp; Develop Contribute Special Expertise</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are seeking a motivated and results-driven Sales Representative to join our team in Iraq. The successful candidate will be responsible for promoting and selling medical equipment, healthcare solutions, and consumable products to hospitals, clinics, laboratories, and healthcare professionals.</p><p><br></p><p>Requirements</p><ul><li>raqi resident based in Baghdad.</li><li>Bachelor's degree in Biomedical Engineering, or a related field.</li><li>Previous experience in medical equipment or healthcare sales is preferred.</li><li>Strong communication, negotiation, and presentation skills.</li><li>Ability to build professional relationships with healthcare providers.</li><li>Self-motivated, organized, and target-oriented.</li><li>Willingness to travel within Baghdad and other areas of Iraq when required.</li><li>Good command of Arabic and English is preferred.</li><li>Car is a must. </li></ul><p> Interested candidates are invited to apply and send their CV.</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p><br></p><ul><li>Develop and maintain strong relationships with hospitals, clinics, doctors, and healthcare institutions.</li><li>Promote medical equipment and healthcare solutions to potential customers.</li><li>Identify new business opportunities and expand the customer network.</li><li>Conduct product presentations and demonstrations.</li><li>Prepare quotations and follow up with customers throughout the sales process.</li><li>Achieve sales targets and provide regular market feedback.</li><li>Monitor market trends and competitor activities.</li><li>Coordinate with the technical and management teams to ensure customer satisfaction.</li></ul></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><u><b>Job Summary</b></u> <br></span><p>The Dietician is responsible to provide expert nutritional guidance and support to individuals seeking to improve their health and well-being through diet. They aim to assess clients' dietary needs, preferences, and goals, developing personalized nutrition plans tailored to their specific requirements. Additionally, Dieticians educate clients on nutrition principles, healthy eating habits, and the importance of a balanced diet in achieving optimal health. They offer ongoing support, monitoring progress, and adjusting meal plans as needed to help clients reach their nutritional objectives. Ultimately, Dieticians play a crucial role in empowering individuals to make informed food choices and adopt sustainable lifestyle habits that promote long-term health and wellness. </p><br> <br><br><u><b>Job Responsibilities 1</b></u> <br><p>Conduct thorough nutritional assessments of clients, including their dietary habits, medical history, and lifestyle factors, to develop personalized nutrition plans.</p><br> <p>Educate clients on the principles of healthy eating, including portion control, nutrient balance, and food preparation techniques, to promote overall well-being.</p><br> <p>Provide individualized dietary recommendations to address specific health concerns or conditions, such as weight management, diabetes, heart disease, or gastrointestinal disorders.</p><br> <p>Monitor clients' progress towards their nutritional goals, conducting regular follow-up sessions to assess compliance, adjust meal plans, and offer ongoing support and encouragement.</p><br> <p>Stay abreast of the latest research, guidelines, and trends in nutrition and dietetics, continuously updating knowledge and skills to deliver evidence-based nutritional advice.</p><br> <p>Collaborate with other healthcare professionals, such as physicians, nurses, and fitness trainers, to coordinate care and ensure holistic support for clients' health and wellness goals.</p><br> <p>Conduct group nutrition education sessions, workshops, or seminars to promote healthy eating habits and raise awareness of the importance of nutrition in overall health.</p><br> <p>Develop educational materials, such as handouts, meal plans, or online resources, to support clients in implementing dietary changes and making informed food choices.</p><br> <p>Advocate for nutrition-related policy changes or initiatives within the community or organization to promote healthier environments and lifestyles.</p><br> <p>Maintain accurate and confidential records of client consultations, assessments, and progress notes, adhering to ethical and professional standards in dietetic practice.</p><br> <br><br><u><b>Job Responsibilities 2</b></u> <br><br><b>Additional Responsibilities 3</b> <br><br><u><b>Job Knowledge &amp; Skills</b></u> <br><p>Profound understanding of nutrition science, including macronutrients, micronutrients, and dietary guidelines, to develop comprehensive and evidence-based nutrition plans.</p><br> <p>Strong communication and interpersonal skills to effectively assess clients' nutritional needs, communicate dietary recommendations, and motivate behavior change.</p><br> <p>Ability to analyze and interpret nutritional data, such as dietary intake records and lab results, to identify areas for improvement and tailor nutrition interventions accordingly.</p><br> <p>Knowledge of special dietary considerations and restrictions, such as allergies, intolerances, and cultural or religious practices, to accommodate diverse client needs.</p><br> <p>Continuous learning and professional development to stay updated on the latest research, trends, and advancements in the field of nutrition and dietetics.</p><br> <p>ERP knowledge preferably SAP functional skills are a requirement to be successful in this role.</p><br> <br><br><u><b>Job Experience</b></u> <br><p>Minimum 8 year(s) working experience, 5 year(s) relevant working experience, 2 year (s) GCC is a plus</p><br><br><br><u><b>Competencies</b></u> <br>Resilience<br>AI Fluency<br>Quality<br>Leadership<br>Nutrition Management L3<br>Healthy menus L3<br>Recipes L3<br>Hygiene L3<br>Agility<br>Food Quality Control L3<br><br><br><u><b>Education</b></u> <br>Bachelor's Degree in Dietetics<br><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><u><b>Job Summary</b></u> <br></span><p>The Dietician is responsible to provide expert nutritional guidance and support to individuals seeking to improve their health and well-being through diet. They aim to assess clients' dietary needs, preferences, and goals, developing personalized nutrition plans tailored to their specific requirements. Additionally, Dieticians educate clients on nutrition principles, healthy eating habits, and the importance of a balanced diet in achieving optimal health. They offer ongoing support, monitoring progress, and adjusting meal plans as needed to help clients reach their nutritional objectives. Ultimately, Dieticians play a crucial role in empowering individuals to make informed food choices and adopt sustainable lifestyle habits that promote long-term health and wellness. </p><br> <br><br><u><b>Job Responsibilities 1</b></u> <br><p>Conduct thorough nutritional assessments of clients, including their dietary habits, medical history, and lifestyle factors, to develop personalized nutrition plans.</p><br> <p>Educate clients on the principles of healthy eating, including portion control, nutrient balance, and food preparation techniques, to promote overall well-being.</p><br> <p>Provide individualized dietary recommendations to address specific health concerns or conditions, such as weight management, diabetes, heart disease, or gastrointestinal disorders.</p><br> <p>Monitor clients' progress towards their nutritional goals, conducting regular follow-up sessions to assess compliance, adjust meal plans, and offer ongoing support and encouragement.</p><br> <p>Stay abreast of the latest research, guidelines, and trends in nutrition and dietetics, continuously updating knowledge and skills to deliver evidence-based nutritional advice.</p><br> <p>Collaborate with other healthcare professionals, such as physicians, nurses, and fitness trainers, to coordinate care and ensure holistic support for clients' health and wellness goals.</p><br> <p>Conduct group nutrition education sessions, workshops, or seminars to promote healthy eating habits and raise awareness of the importance of nutrition in overall health.</p><br> <p>Develop educational materials, such as handouts, meal plans, or online resources, to support clients in implementing dietary changes and making informed food choices.</p><br> <p>Advocate for nutrition-related policy changes or initiatives within the community or organization to promote healthier environments and lifestyles.</p><br> <p>Maintain accurate and confidential records of client consultations, assessments, and progress notes, adhering to ethical and professional standards in dietetic practice.</p><br> <br><br><u><b>Job Responsibilities 2</b></u> <br><br><b>Additional Responsibilities 3</b> <br><br><u><b>Job Knowledge &amp; Skills</b></u> <br><p>Profound understanding of nutrition science, including macronutrients, micronutrients, and dietary guidelines, to develop comprehensive and evidence-based nutrition plans.</p><br> <p>Strong communication and interpersonal skills to effectively assess clients' nutritional needs, communicate dietary recommendations, and motivate behavior change.</p><br> <p>Ability to analyze and interpret nutritional data, such as dietary intake records and lab results, to identify areas for improvement and tailor nutrition interventions accordingly.</p><br> <p>Knowledge of special dietary considerations and restrictions, such as allergies, intolerances, and cultural or religious practices, to accommodate diverse client needs.</p><br> <p>Continuous learning and professional development to stay updated on the latest research, trends, and advancements in the field of nutrition and dietetics.</p><br> <p>ERP knowledge preferably SAP functional skills are a requirement to be successful in this role.</p><br> <br><br><u><b>Job Experience</b></u> <br><p>Minimum 8 year(s) working experience, 5 year(s) relevant working experience, 2 year (s) GCC is a plus</p><br><br><br><u><b>Competencies</b></u> <br>Resilience<br>AI Fluency<br>Quality<br>Leadership<br>Nutrition Management L3<br>Healthy menus L3<br>Recipes L3<br>Hygiene L3<br>Agility<br>Food Quality Control L3<br><br><br><u><b>Education</b></u> <br>Bachelor's Degree in Dietetics<br><br><br><br> </div>

<p>EPP III, Generator (3 - 150KW) and HVAC Technician SWA (Bahrain, UAE, Saudia Arabia, Kuwait, Jordan, Iraq) Perform troubleshooting, diagnostics, maintenance, and services on all types of military and commercial generators and HVAC systems used by the U.S. Army to include the 150kW EPP III generators.</p><p>MEANINGFUL WORK AND PERSONAL IMPACT As a Generator and HVAC Mechanic, the work you ll do at GDIT will be impactful to the mission of the Worldwide Field Support contract for the U.S. Army. You ll play a crucial role in providing on-site technical and maintenance assistance, analyzing complex technical problems, and providing training to site operations and maintenance personnel.</p><p>Perform maintenance and sustainment support on 3kW to 150kW, 500 0hz generators involving installation and removal of generators from fixed and mobile locations, troubleshoots and repair alternating current (AC) systems, direct current (DC) systems, electronic control systems and other program logic controls, electrical wiring and accessories. Troubleshoot and repair HVAC, Chillers, and Environmental Control Units some are standalone units and others are mounted on trailers and vehicles. Maintain all types of commercial power generation equipment; military spec generators and Uninterrupted Power Systems (UPS). Operate a Load bank during testing Fabricate wire harnesses and solder terminals. Some work will be in a generator shop environment, and some work will be in a field environment. Other duties as assigned.</p><p>WHAT YOU LL NEED TO SUCCEED Bring your Generator and HVAC expertise along with a drive for innovation to GDIT.</p><p>Other duties as assigned.</p><p><strong>Desired Candidate Profile</strong></p><p>The Generator and HVAC Mechanic must have:</p><p>Education: High School diploma</p><p>Experience: BA/BS plus 2 years experience, AA/AS/plus 4 years experience, or a High School diploma and 7 years experience</p><p>Technical skills: Extensive diesel generator experience. Knowledge of generator parallel systems and switch gear. Experience with brazing copper tubing and evacuating and recharging refrigerant.</p><p>Security Clearance: Secret</p><p>Travel to Bahrain, UAE, Saudia Arabia, Kuwait, Jordan, Iraq</p><p>Role requirements: US passport must not expire for at least 2 years, valid US driver s license, and an international driver s permit (AAA)</p><p>Skills Generator Repair HVAC Repair/Troubleshooting Generator Troubleshooting Power Generation Certifications Section 608 Technician Certification EPA is a plus</p><p>Must meet CRC fitness standards for deployment to SWA (southwest Asia) and maintain those standards annually while on contract in SWA.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Job Description: Mechanical Maintenance Technician – Water Cup Production Line Department: Engineering and Maintenance Industry: Packaged Water / Water Cup Manufacturing Employment Type: Full-time Number of Vacancies: 5 Reports To: Maintenance Supervisor / Senior Maintenance Technician Preferred Nationality: Indian/Iranian Job Purpose Perform hands-on preventive and corrective mechanical maintenance on high-speed thermoforming/Form-Fill-Seal water cup production machines.<br> The technician will inspect, service, repair, adjust, and troubleshoot equipment throughout the complete cup-forming, filling, sealing, cutting, and discharge process.<br> Key Responsibilities Perform scheduled preventive maintenance according to approved checklists.<br> Respond quickly to production-line breakdowns and restore equipment safely.<br> Inspect, dismantle, repair, replace, and reassemble mechanical components.<br> Clean, lubricate, adjust, and align machine parts and assemblies.<br> Check film feeding, heating, forming, filling, sealing, cutting, and discharge stations.<br> Replace bearings, chains, sprockets, timing belts, seals, guides, and other wear parts.<br> Service shafts, gearboxes, conveyors, pumps, pneumatic cylinders, and valves.<br> Assist with mold changes, machine setup, alignment, and trial production.<br> Identify abnormal noise, vibration, temperature, wear, leakage, and misalignment.<br> Report developing defects and required spare parts to senior maintenance personnel.<br> Record completed work, replaced components, and observed machine conditions.<br> Support major maintenance, overhauls, installations, and shutdown activities.<br> Work with production operators to identify and correct machine-related quality problems.<br> Maintain tools and keep maintenance areas clean and organized.<br> Follow all safety, food-hygiene, and lockout/tagout procedures.<br> Required Technical Experience Candidates should have strong practical knowledge of: Thermoforming stations and molds Plastic-film feeding, tracking, and tension systems Heating systems and heating zones Vacuum systems Pneumatic cylinders, valves, and air-control components Filling mechanisms, pumps, and filling nozzles Lid-film feeding and alignment systems Heat-sealing stations Cutting and punching systems Cup-discharge mechanisms Bearings, chains, sprockets, and timing belts Shafts, couplings, and gearboxes Linear guides and mechanical slides Conveyors and pumps Lubrication and preventive maintenance Candidates must be able to assist in diagnosing and correcting: Poor or incomplete cup forming Film misalignment, slipping, or incorrect tension Water leakage or incorrect filling volume Weak, uneven, or incomplete sealing Cutting and punching problems Machine timing and synchronization faults Abnormal vibration, noise, wear, or overheating Repeated machine stoppages Experience with Thermonox, Beta-Pak, or technically similar high-speed machines is strongly preferred.<br> Required Qualifications Technical certificate or diploma in Mechanical Maintenance, Industrial Maintenance, Mechanical Engineering, or a related field.<br> Minimum 3–5 years of practical experience on thermoforming/FFS cup production machines.<br> Strong mechanical fitting and troubleshooting skills.<br> Ability to use standard maintenance tools and precision measuring instruments.<br> Basic ability to read drawings, equipment manuals, and parts diagrams.<br> Ability to work safely under pressure during production breakdowns.<br> Willingness to work shifts, overtime, and emergency maintenance when required.<br> Ability to follow instructions and work effectively within a maintenance team.<br> Critical Selection Requirement This is a specialized production-line maintenance position.<br> Applicants whose experience is limited to bottled-water filling lines, RO plants, automotive maintenance, building maintenance, or general factory maintenance will not qualify unless they also possess direct thermoforming/FFS water cup production-machine experience.<br></span> </div>

<p><h4>Duties</h4> <p>Responsible for maintaining a safe workplace and ensuring that safety is the highest priority in the workplace.</p> <p>Comply with all Environmental Health & Safety and Quality Assurance requirements and goals.</p> <p>Provide information and materials to these divisions as necessary to ensure adequate and legal documentation.</p> <p>Ensure data accuracy and update of equipment inventory database.</p> <p>Ensure that related data processing activities meet the requirements.</p> <p>Process excess turn-in documentation for all controlled and non-controlled excess equipment and materials.</p> <p>Review, reconcile, adjust and process all inventory transactions.</p> <p>Process Survey Reports for all missing equipment.</p> <p>Process and coordinate Equipment Transfers.</p> <p>Perform positive verbal and written communication skills with all internal and external customers.</p> <p>Assist in a broad scope of direct and indirect support activities involving customer owned equipment as necessary to complete assigned tasks.</p> <p>Perform additional duties and projects as assigned.</p> <h4>Required</h4> <p><strong>Minimum acceptable experience level:</strong> Minimum of 3 years’ experience supporting a DOD or DOS program exposure, at least two (2) years’ of international experience.</p> <p><strong>Knowledge, skills, and abilities:</strong></p> <ul> <li>Prior proven experience in property disposal operations with Defense Reutilization Management Operations (DRMO), Hazmat experience.</li> <li>Experience operating heavy equipment to include up to a 30K forklift, extended reach forklift, material handler, grappler (excavator), front end loader and material shredders.</li> <li>Experience with cutting torches to include plasma cutters.</li> <li>Commitment to maintaining a high performance team which delivers customer service excellence.</li> <li>Knowledge of principles and processes involved in supporting contract responsibilities at an overseas facility.</li> <li>Ability to work in a fast-paced environment that requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules.</li> <li>Cross-cultural sensitivity with an international perspective.</li> <li>Excellent organizational and time management skills.</li> <li>Computer skills, specifically in Microsoft Word and Excel.</li> <li>Ability to become an active and functioning member of a team.</li> <li>Ability to be innovative and be an agent for change.</li> <li>Expert communication skills to facilitate and disseminate information.</li> </ul> <p><strong>Education:</strong> A high school diploma or GED (General Education Diploma), bachelor’s degree in related field or fifteen (15) years of related experience.</p> <h4>Passport, licenses and certifications</h4> <p>As part of pre-contingency requirements, by the time the visa process starts, candidates must possess a valid passport with a minimum of 18 months remaining to expiration date with 8 blank pages.</p> <p>Valid drivers’ license.</p> <h4>Security vetting</h4> <p>Already possess a US Government issued security clearance or be able to obtain a favorable US Government clearance prior to being hired is required for the position. Must maintain eligibility at the required certification or clearance level for the duration of the contract.</p> <h4>Language skills</h4> <p>Satisfactory English proficiency to meet job requirements and to adhere and comply with safety, health, and security measures.</p> <h4>Medical</h4> <p>Successfully complete and pass the medical and drug examinations as required by the employer and customer for deployment to Iraq. Must maintain physical and drug requirements for duration of deployment.</p> <h4>Desired</h4> <ul> <li>Previous out of home country experience and previous work experience in harsh environmental conditions are a plus.</li> <li>Department of State experience.</li> <li>Five to seven years of international experience in challenging locations, preferably working in the Middle East, with a working knowledge of customs and cultural differences.</li> <li>Experience working with Amentum-PAE.</li> </ul> <h4>Other knowledge, skills and abilities</h4> <ul> <li>Knowledge of the principles and processes involved in Quality Control Management.</li> <li>Successful management of multiple sites in geographically dispersed locations.</li> <li>Ability to collect, analyze and summarize data and to prepare clear and concise reports.</li> <li>Experience in effectively dealing with international and headquarters staff, and sensitivity to other cultures.</li> <li>Exercise sound judgment and make decisions independently.</li> <li>Excellent organizational and time management skills, with the ability to handle multiple tasks and administrative details in a fast paced and constantly changing environment.</li> <li>Expert communication skills to facilitate and disseminate information.</li> </ul></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Disposal Yard Specialist will be based at Amentum Baghdad Embassy Compound [BEC] in Baghdad, Iraq, and serve the Base Life Support Services contract in support of the State Department. This position will report to the Disposal Yard Manager. The duties and responsibilities listed below are representative of the nature and level of work assigned and are not necessarily all inclusive.</p><p>DUTIES:</p><ul><li>Responsible for maintaining a safe workplace and ensuring that safety is the highest priority in the workplace.</li><li>Comply with all Environmental Health &amp; Safety and Quality Assurance requirements and goals.</li><li>Provide information and materials to these divisions as necessary to ensure adequate and legal documentation.</li><li>Ensures data accuracy and update of equipment inventory database.</li><li>Ensure that related data processing activities meet the requirements.</li><li>Process excess turn-in documentation for all controlled and non-controlled excess equipment and materials.</li><li>Review, reconcile, adjust and process all inventory transactions.</li><li>Process Survey Reports for all missing equipment.</li><li>Process and coordinate Equipment Transfers.</li><li>Perform positive verbal and written communication skills with all internal and external customers.</li><li>Assist in a broad scope of direct and indirect support activities involving customer owned equipment as necessary to complete assigned tasks.</li><li>Perform additional duties and projects as assigned.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Minimum of 3 years experience supporting a DOD or DOS program Exposure, at least two (2) years of international experience.</li><li>Prior proven experience in Property Disposal operations with Defense Reutilization Management Operations (DRMO), Hazmat experience.</li><li>Experience operating heavy equipment to include up to a 30K Forklift, Extended reach Forklift, Material Handler, Grappler (Excavator), Front End Loader and Material Shredders.</li><li>Experience with cutting torches to include Plasma cutters.</li><li>Commitment to maintaining a high performance team which delivers customer service excellence.</li><li>Knowledge of principles and processes involved in supporting contract responsibilities at an overseas facility.</li><li>Ability to work in a fast-paced environment that requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules.</li><li>Cross-cultural sensitivity with an international perspective.</li><li>Excellent organizational and time management skills.</li><li>Computer skills, specifically in Microsoft Word and Excel.</li><li>Ability to become an active and functioning member of a team.</li><li>Ability to be innovative and be an agent for change.</li><li>Expert communication skills to facilitate and disseminate information.</li><li>A high school diploma or GED (General Education Diploma), Bachelor s Degree in related field fifteen (15) yeas of related experience.</li><li>As part of pre-contingency requirements, by the time the visa process starts , candidates must possess a valid passport with a minimum of 18 months remaining to expiration date with 8 blank pages.</li><li>Valid drivers license</li><li>Already possess a US Government issued security clearance or be able to obtain a favorable US Government clearance prior to being hired is required for the position. Must maintain eligibility at the required certification or clearance level for the duration of the contract.</li><li>Satisfactory English proficiency to meet job requirements and to adhere and comply with safety, health, and security measures.</li><li>Successfully complete and pass the medical and drug examinations as required by Amentum and our customer for deployment to Iraq. Must maintain physical and drug requirements for duration of deployment.</li><li>Previous out of home country experience and previous work experience in harsh environmental conditions are a plus.</li><li>Department of State experience.</li><li>Five to seven years of international experience in challenging locations, preferably working in the Middle East, with a working knowledge of customs and cultural differences.</li><li>Experience working with Amentum-PAE.</li><li>Knowledge of the principles and processes involved in Quality Control Management.</li><li>Successful management of multiple sites in geographically dispersed locations.</li><li>Ability to collect, analyze and summarize data and to prepare clear and concise reports.</li><li>Experience in effectively dealing with international and headquarters staff, and sensitivity to other cultures.</li><li>Exercise sound judgment and make decisions independently.</li><li>Excellent organizational and time management skills, with the ability to handle multiple tasks and administrative details in a fast paced and constantly changing environment.</li><li>Expert communication skills to facilitate and disseminate information.</li></ul><p></p></section>

<p><h4>Duties</h4> <p>Responsible for maintaining a safe workplace and ensuring that safety is the highest priority in the workplace.</p> <p>Comply with all Environmental Health & Safety and Quality Assurance requirements and goals.</p> <p>Provide information and materials to these divisions as necessary to ensure adequate and legal documentation.</p> <p>Ensure data accuracy and update of equipment inventory database.</p> <p>Ensure that related data processing activities meet the requirements.</p> <p>Process excess turn-in documentation for all controlled and non-controlled excess equipment and materials.</p> <p>Review, reconcile, adjust and process all inventory transactions.</p> <p>Process Survey Reports for all missing equipment.</p> <p>Process and coordinate Equipment Transfers.</p> <p>Perform positive verbal and written communication skills with all internal and external customers.</p> <p>Assist in a broad scope of direct and indirect support activities involving customer owned equipment as necessary to complete assigned tasks.</p> <p>Perform additional duties and projects as assigned.</p> <h4>Required</h4> <p><strong>Minimum acceptable experience level:</strong> Minimum of 3 years’ experience supporting a DOD or DOS program exposure, at least two (2) years’ of international experience.</p> <p><strong>Knowledge, skills, and abilities:</strong></p> <ul> <li>Prior proven experience in property disposal operations with Defense Reutilization Management Operations (DRMO), Hazmat experience.</li> <li>Experience operating heavy equipment to include up to a 30K forklift, extended reach forklift, material handler, grappler (excavator), front end loader and material shredders.</li> <li>Experience with cutting torches to include plasma cutters.</li> <li>Commitment to maintaining a high performance team which delivers customer service excellence.</li> <li>Knowledge of principles and processes involved in supporting contract responsibilities at an overseas facility.</li> <li>Ability to work in a fast-paced environment that requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules.</li> <li>Cross-cultural sensitivity with an international perspective.</li> <li>Excellent organizational and time management skills.</li> <li>Computer skills, specifically in Microsoft Word and Excel.</li> <li>Ability to become an active and functioning member of a team.</li> <li>Ability to be innovative and be an agent for change.</li> <li>Expert communication skills to facilitate and disseminate information.</li> </ul> <p><strong>Education:</strong> A high school diploma or GED (General Education Diploma), bachelor’s degree in related field or fifteen (15) years of related experience.</p> <h4>Passport, licenses and certifications</h4> <p>As part of pre-contingency requirements, by the time the visa process starts, candidates must possess a valid passport with a minimum of 18 months remaining to expiration date with 8 blank pages.</p> <p>Valid drivers’ license.</p> <h4>Security vetting</h4> <p>Already possess a US Government issued security clearance or be able to obtain a favorable US Government clearance prior to being hired is required for the position. Must maintain eligibility at the required certification or clearance level for the duration of the contract.</p> <h4>Language skills</h4> <p>Satisfactory English proficiency to meet job requirements and to adhere and comply with safety, health, and security measures.</p> <h4>Medical</h4> <p>Successfully complete and pass the medical and drug examinations as required by the employer and customer for deployment to Iraq. Must maintain physical and drug requirements for duration of deployment.</p> <h4>Desired</h4> <ul> <li>Previous out of home country experience and previous work experience in harsh environmental conditions are a plus.</li> <li>Department of State experience.</li> <li>Five to seven years of international experience in challenging locations, preferably working in the Middle East, with a working knowledge of customs and cultural differences.</li> <li>Experience working with Amentum-PAE.</li> </ul> <h4>Other knowledge, skills and abilities</h4> <ul> <li>Knowledge of the principles and processes involved in Quality Control Management.</li> <li>Successful management of multiple sites in geographically dispersed locations.</li> <li>Ability to collect, analyze and summarize data and to prepare clear and concise reports.</li> <li>Experience in effectively dealing with international and headquarters staff, and sensitivity to other cultures.</li> <li>Exercise sound judgment and make decisions independently.</li> <li>Excellent organizational and time management skills, with the ability to handle multiple tasks and administrative details in a fast paced and constantly changing environment.</li> <li>Expert communication skills to facilitate and disseminate information.</li> </ul></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span></span><p><strong>Regional Medical Advisor- Field, Iraq</strong> &nbsp;</p><br> <p>Product &amp; Portfolio Strategy<br>Iraq&nbsp;</p><br> <p>Shape the future of cardiometabolic care by bridging cutting-edge science with the healthcare professionals and digital opinion leaders who influence treatment decisions for millions of pa-tients worldwide</p><br> <p><strong>Your new role:</strong><br>As a Regional Medical Advisor within our Cardiometabolic team, you will be at the intersection of science, strategy, and stakeholder engagement, driving medical education, building trusted relationships with Key Opinion Leaders (KOLs) and Digital Opinion Leaders (DOLs), and translating real-time insights into actions that help shape cardiometabolic care across Iraq.</p><br> <p><strong>Your key responsibilities will include:</strong></p><br> <ul> <li>Planning and executing medical education activities — from congress symposia to standalone scientific events — while supporting speaker development, emerging KOL growth, and publication activities including abstracts, presentations, and manuscripts</li> <li>Deliver&nbsp;scientific information to HCPs&nbsp;and&nbsp;experts; align&nbsp;HCP/KOL&nbsp;engagement&nbsp;with the brand event calendar; respond to medical information requests; and support the&nbsp;sales team&nbsp;with&nbsp;scientific and clinical questions&nbsp;on&nbsp;NN marketed products&nbsp;and&nbsp;disease awareness.&nbsp;</li> <li>Owning one-to-one digital scientific engagement with DOLs, tailoring discussions to their online behaviours, preferred content formats, and platform dynamics, and activating them around key data moments through agile, compliant execution</li> <li>Translating complex clinical evidence into clear, structured scientific narratives suited to digital contexts, while maintaining scientific accuracy, balance, and compliance at all times</li> <li>Gathering and synthesising insights from digital interactions, DOL activity, and competi-tor intelligence to inform national and local medical and marketing strategies</li> <li>Assessing and mapping local cardiometabolic standards of care to identify gaps, support-ing care pathway improvements across screening, diagnosis, referral, and access, and engaging medical associations to advance guideline-directed therapy</li> <li>Delivering internal medical training to Sales, Access, and cross-functional teams to strengthen scientific understanding and ensure consistent, compliant communication<br>Supporting medical readiness across the full product lifecycle — from pre-launch through to post-launch — and coordinating cycle planning meetings and capability-building initia-tives</li> </ul> <p><br><strong>Your new department:</strong></p><br> <p>In Product &amp; Portfolio Strategy we drive commercial strategy, medical affairs and business devel-opment across our therapy areas. We act as a connector and compass, guiding the new Novo Nordisk portfolio for sustained competitiveness upstream, and maximising portfolio potential through successful commercial strategies and competitive launches downstream.<br>Within this area, the Cardiometabolic Medical Affairs team plays a pivotal role in shaping how Novo Nordisk's diabetes and obesity portfolio is positioned within the broader Cardio-Metabolic-Renal approach. You will join a team of medical professionals who combine scientific rigour with strategic thinking, working closely with commercial, access, and other internal stakeholders to ensure that the best available evidence reaches the HCPs and decision-makers who need it most.</p><br> <p><strong>Your skills &amp; qualifications:</strong><br>We are looking for a scientifically credible medical advisor who thrives in digital-first engagement and can turn complex data into compelling narratives. You will bring:</p><br> <ul> <li>An advanced degree in life sciences (e.g., MD, PharmD, PhD, or equivalent)</li> <li>3–5 years of clinical practice or pharmaceutical experience in Medical Affairs; prior RMA experience is a strong advantage</li> <li>Strong stakeholder engagement, communication, and presentation skills can provide recommendations despite uncertainty and pressure and are able to handle and simplify complexity while focusing on the bigger picture.&nbsp;</li> <li>A digital-first mindset with the confidence to operate within evolving digital ecosystems, combined with genuine curiosity for emerging digital trends, tools, and engagement models</li> <li>Strong ability to translate scientific data into clear, structured, and engaging narratives tailored to different digital contexts and audiences, with demonstrated strength in written scientific communication</li> <li>Data-driven thinking, using digital signals and insights to guide interactions and priorities, paired with the agility to work effectively in a fast-paced, ambiguous environment</li> <li>A strong compliance mindset, particularly in the context of digital interactions and scien-tific exchange</li> </ul> <p><strong>Working at Novo Nordisk:</strong><br>At Novo Nordisk, we have spent over a century defeating serious chronic diseases — and today we are reaching more patients than ever before. This dedication has built a company where sci-entific ambition meets genuine care for the people we serve and the colleagues we work along-side. Here, diverse perspectives, shared purpose, and mutual accountability come together to create extraordinary results. When you join us, you step into a high-performance culture where your expertise shapes real outcomes for patients, and where your growth as a professional and as a person truly matters.</p><br> <p><br><strong>What we offer:</strong></p><br> <p>Beyond a purpose you can feel in your everyday work, being part of a global healthcare company means access to career development opportunities across functions and geographies, alongside benefits designed to support you at every stage of your career and life.</p><br> <p><strong>Deadline:</strong><br>18 September 2026. Applications are reviewed on an ongoing basis, so we encourage you to ap-ply as soon as possible.</p><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Wood is recruiting for a Rotating Mechanical Engineer to join its Iraq business unit focusing on developing and implementing preventive and predictive maintenance programs for rotating equipment.</p><br><p>This role is a full-time on-site role in Basra, Iraq with travel requirement.</p><br><p><strong>Reports to:</strong> Construction Manager</p><br><br> Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy &amp; Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com<br> <b>Diversity Statement&nbsp;</b><br> We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.<br><br>Responsibilities:<br><p>Wood is recruiting for a Rotating Mechanical Engineer to join its Iraq business unit focusing on developing and implementing preventive and predictive maintenance programs for rotating equipment.</p><br><p>This role is a full-time on-site role in Basra, Iraq with travel requirement.</p><br><p><strong>Reports to:</strong> Construction Manager</p><br><p><i><strong>#Wood #Iraq #Basra #Rotating Mechanical Engineer</strong></i></p><br><p><strong><u>The role</u></strong></p><br><p>This is an exciting opportunity for an experienced&nbsp;Rotating Mechanical Engineer to join our Iraq Business Unit.</p><br><p><strong>Our Clients and Projects&nbsp;</strong></p><br><p><strong>Designing the future. Transforming the world.&nbsp;</strong></p><br><p>Wood is an integral part of operations in Iraq, and we are continuing to grow our footprint across the country. With a 90-year heritage, 10 major contracts and over 850 employees, we have the skills, expertise and asset knowledge to support clients to deliver energy security and decarbonisation ambitions.</p><br><p>Wood excels in supporting our clients to deliver complex upstream and midstream oil and gas projects in Iraq delivering maintenance, modifications and engineering solutions. We are committed to decarbonising existing assets, producing cleaner energy and developing a sustainable national workforce, ensuring the long-term growth of the region.</p><br><p><strong><u>What we can offer</u></strong></p><br><ul> <li><strong>Meaningful and interesting projects</strong> Delivered to high profile clients and complex projects in Iraq&nbsp;</li> <li><strong>Commitment to Diversity and Inclusion</strong>; we are an organisation actively committed to diversity and inclusion across our business with employee networks committed to giving all employees a voice&nbsp;</li> <li><strong>Competitive salary</strong> with regular salary reviews to ensure we are rewarding at the right level in line with the market&nbsp;</li> <li><strong>Medical Insurance:&nbsp;</strong>Ensures inpatient and outpatient medical care is available should you require treatment.&nbsp;</li> <li><strong>Commitment to continued professional development;</strong> development plans that are tailored to your individual needs and interests&nbsp;</li> <li><strong>Global connections</strong>: join experts around the world who are at the leading edge of our industry, shaping the standards of our profession&nbsp;</li> <li><strong>Long Service Award:&nbsp;</strong>Wood values the commitment and loyalty of our people. Celebrating Long Service provides an opportunity for the business to demonstrate their appreciation of the hard work, dedication and many years’ services of our employees at 5-year service milestones&nbsp;</li></ul><p><strong><u>Job Objectives:</u></strong></p><br><ul> <li><span>Develop and implement preventive and predictive maintenance programs for rotating equipment.</span></li> <li><span>Lead root cause failure analysis (RCFA) and implement corrective actions.</span></li> <li><span>Monitor equipment performance and recommend improvements to enhance reliability and efficiency.</span></li> <li><span>Support condition monitoring activities (vibration analysis, thermography, oil analysis).</span></li> <li><span>Provide technical expertise during troubleshooting, overhauls, and major repairs.</span></li> <li><span>Review maintenance procedures, work packs, and job safety analyses (JSAs).</span></li> <li><span>Ensure compliance with OEM specifications, industry standards (API, ISO), and company procedures.</span></li> <li><span>Prepare maintenance plans, schedules, and spare parts lists for rotating equipment.</span></li> <li><span>Maintain accurate records of maintenance history, failure reports, and performance data.</span></li> <li><span>Support the development of equipment criticality assessments and risk-based maintenance strategies.</span></li> <li><span>Liaise with operations, planning, procurement, and engineering teams to ensure maintenance activities are aligned with production goals.</span></li> <li><span>Participate in HAZOPs, MOCs, and technical audits.</span></li> <li><span>Support audits, inspections, and regulatory compliance efforts.</span></li> <li><span>Provide rotating equipment expertise during facility shutdowns, turnarounds, and brownfield projects.</span></li> <li><span>Ensure that all work complies with health, safety, and environmental standards at West Qurna 1.</span></li> <li><span>Support the application of WQ1-FOD Policy in relation to the Drug and Alcohol policy, Company Ethics, Award conditions, etc, whilst respecting and protecting the personal rights of subordinates.</span></li></ul><br>Qualifications:<br><p><strong>What makes you remarkable?&nbsp;</strong></p><br><p>At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world’s most critical challenges.&nbsp;&nbsp;</p><br><p><strong>Expected:</strong></p><br><ul> <li><span>Bachelor’s degree in Mechanical Engineering or a related discipline.</span></li> <li><span>Minimum of 10 years’ experience specifically in Rotating Equipment Maintenance, preferably in oil &amp; gas and petrochemical sector.</span></li> <li><span>Certifications in vibration analysis (Category I/II) or RCA Training is a plus.</span></li> <li><span>Knowledge on the International Standard related to Mechanical, such as API 610, API 617, ANSI B73.1, ISO 5199, ISO 10816, etc.</span></li></ul><p><span><strong>Skills:</strong></span></p><br><ul> <li><span>Language English and Arabic Proficiency.</span></li> <li><span>Proficiency in reading and interpreting engineering drawings and specifications.</span></li> <li><span>Strong knowledge of rotating machinery design, operation, and maintenance.</span></li> <li><span>Strong knowledge of condition monitoring tools and analysis techniques.</span></li> <li><span>Good awareness in Safety Operations, Risk Assessment, and Best Practice Engineering.</span></li> <li><span>Problem Solving</span></li> <li><span>Excellent Communication and interpersonal skills.</span></li> <li><span>Understand and follow oral and written instructions; prepare clear and concise records, reports and other written materials.</span></li> <li><span>Continuous Improvement</span></li> <li><span>Ability to interact in a multi-cultural environment</span></li> <li><span>Demonstrated experience in liaising with third party contractors, business partners and local communities</span></li></ul><p><span><strong>Systems:</strong></span></p><br><ul> <li><span>Maximo / CMMS / Aconex</span></li> <li><span>Microsoft Offices</span></li></ul> </div>

<p><h4>Duties</h4> <p><strong>Responsible for maintaining a safe workplace and ensuring that safety is the highest priority in the workplace.</strong></p> <p><strong>Comply with all Environmental Health & Safety and Quality Assurance requirements and goals. Provide information and materials to these divisions as necessary to ensure adequate and legal documentation.</strong></p> <p><strong>Provide oversight of all material handling and heavy equipment support operations.</strong></p> <p><strong>Primary responsibilities will be the safety and professional operations of a daily multi-national workforce and ensuring that all work requests are completed.</strong></p> <p><strong>Schedule daily work assignments of personnel.</strong></p> <p><strong>Review work orders and support requests to determine safety requirements, permitting, and equipment needs.</strong></p> <p><strong>Manage all work order activity to ensure that all work is properly documented and submitted for recording.</strong></p> <p><strong>Provide reports and data - both required and ad hoc.</strong></p> <p><strong>Ensure adequate supplies and materials are ordered for department.</strong></p> <p><strong>Ensure personnel are properly trained in equipment operation.</strong></p> <p><strong>Monitor and evaluate performance of personnel.</strong></p> <p><strong>Perform additional duties and projects as assigned.</strong></p> <h4>Required</h4> <p><strong>Minimum acceptable experience level:</strong> Two (2) years’ experience with horizontal earthwork and material handling equipment including forklifts, cranes, loaders, bulldozers, skid steers, and semi-tractor trucks.</p> <p><strong>Knowledge, skills, and abilities:</strong></p> <ul> <li>Good time management skills and able to multi-task using various types of cranes and rigging gear.</li> <li>Knowledge of proper loading techniques and forklift weight capacities.</li> <li>Ability to lift up to 30 pounds, bend, stoop, and climb in and around construction type equipment and work in adverse climatic conditions.</li> <li>Ability to coordinate and complete basic Transportation Movement Request (TMR).</li> <li>Prior experience in working with a multi-national workforce.</li> <li>Ability to extract information to produce reports.</li> <li>Ability to communicate with a wide variety of colleagues and customers.</li> <li>Knowledge of principles and processes involved in supporting contract responsibilities at an overseas facility.</li> <li>Ability to work in a fast-paced environment that requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules.</li> <li>Cross-cultural sensitivity with an international perspective.</li> <li>Excellent organizational and time management skills.</li> <li>Computer skills, specifically in Microsoft Word and Excel.</li> <li>Ability to become an active and functioning member of a team.</li> <li>Ability to be innovative and be an agent for change.</li> <li>Expert communication skills to facilitate and disseminate information.</li> </ul> <p><strong>Education:</strong> A high school diploma or GED.</p> <p><strong>Passport, licenses and certifications:</strong> As part of pre-contingency requirements, by the time the visa process starts, candidates must possess a valid passport with a minimum of 18 months remaining to expiration date with 8 blank pages. Valid drivers’ license from home of record.</p> <p><strong>Security vetting:</strong> Already possess a US Government issued security clearance or Moderate Risk Public Trust (MRPT) or be able to obtain a favorable MRPT certification or US Government clearance prior to being hired is required for the position. Must maintain eligibility at the required certification or clearance level for the duration of the contract.</p> <p><strong>Language skills:</strong> Satisfactory English proficiency to meet job requirements and to adhere and comply with safety, health, and security measures.</p> <p><strong>Medical:</strong> Successfully complete and pass the medical and dental examinations as required by Amentum and our customer for deployment to Iraq. Must maintain physical and dental requirements for duration of deployment.</p> <h4>Desired</h4> <ul> <li>Relevant overseas contract experience.</li> <li>Previous work experience in harsh environmental conditions are a plus.</li> <li>Experience working with Amentum.</li> </ul> <h4>Other Responsibilities</h4> <p><strong>Safety</strong> - Amentum enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid/buddy aid responsibilities, participating in emergency response tasks, and serving on safety committees and teams.</p> <p><strong>Quality</strong> - Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the Amentum Quality Policy and carry out job activities in compliance with applicable Amentum Quality System documents and customer contracts. Each employee must read and understand his or her Quality Management and Customer Satisfaction responsibilities.</p> <p><strong>Procedure compliance</strong> - Each employee must read, understand, and implement the general and specific operational, safety, quality and environmental requirements of all plans, procedures and policies pertaining to job.</p> <h4>Working and Living Conditions</h4> <p>This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environment. Temperatures can reach 120-130 degrees Fahrenheit (50-55 degrees Celsius) during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to Iraq for extended periods.</p> <p>Work schedules are a minimum of 6 days per week and 10 hours per day, while some jobs have higher daily and weekly minimums. Employees must be willing and able to perform physical activities including, but not limited to, heavy lifting and moving of items, parts, assemblies, and equipment up to the safety regulation maximum; climbing in and out of equipment; crawling; and working outdoors. This includes being able to lift and carry 40 pounds of personal protective equipment for extended periods of time and being capable of running and ‘duck & cover’ during emergencies without putting oneself or others at risk.</p></p><p></p>