وظائف مهندس ميكانيكا سيارات في العراق

<p>Determine, review and establish the local and international policies, standards and specifications required for mechanical engineering work related to building construction and refurbishment, water supply stations and water wells, water supply networks for the project in Iraq. Carry out inspections of the water supply facilities to be constructed, assess the current situation of the mechanical systems, and design suitable upgrades/replacement of existing mechanical systems to meet the local and international standards and specifications applicable, and in consultation with all stakeholders. And or, propose, design the replacements and new installations. Prepare and/or review detailed mechanical engineering design documentation including drawings, specifications and scope of work reports to be included in water supply facilities construction tender documents. Prepare quality control and quality assurance documentation related to mechanical engineering work for new water supply facilities. and rehabilitation works. Assist the PM, Deputy PM, Water Supply Engineer and the QA/QC Engineer in the preparation of bidding documents for the new water supply facilities. Supervise on-site works carried out by contractors closely on a day to day basis to ensure quality of the works is monitored and controlled as per specification requirements. Prepare and submit progress reports to the Project Manager/Deputy PM at intervals agreed upon. Ensure safety and health of everyone involved in the project and general public by identifying risks and threats, planning, implementing and maintaining internationally acceptable safety standards in all aspects, at all stages of the project. Ensure all design and construction of water supply facilities and mechanical works is carried out in accordance with and in compliance with industry standards and international best practice energy efficiency principles, standards, guidelines and specification. Provide expert advice to all stakeholders including contractors, PM/Deputy PM, project staff , clients and donor agencies on Mechanical engineering related water supply facilities works where required. Preparing Mechanical drawing package including for new and or rehabilitation works. Preparing Mechanical SOW (scope of work) with technical specification including water wells, pump stations, water supply networks and related works, plumbing and fire protection systems. Designing and preparing a package of water supply and sanitation systems for small and medium scale projects. Using S-pipe and D-pipe or any other relevant and applicable software Create and review technical drawings, plans, and specifications using computer software and prepare design packages in line with client`s design planning manual and design reviewers instructions. Coordinate while required, with design reviewers and incorporate their comments if any. Perform detailed documentation to track project development and design process Ensure project timeline is met and project stays within budget Support the project team in the evaluation and endorsement of objectives and goals of contractor plans, including staffing and budgeting, milestone descriptions, risk management strategies, detailed schedules and scope descriptions, and work breakdown structures Check to assure all materials and /equipment have been tested, submitted and approved. Review all submittals to insure compliance with the plans and specification Inspect all material, equipment and mechanical tools delivered, at the time of receipt, to ensure compliance with submittals, and specifications. Resolve technical problems at site and the certification of construction work at site. Recommend design changes, cost reductions, warranty improvements, and manufacturing issues. Perform other duties as may be assigned. Establishment of procedures with time limits for inspection, sampling and testing of works and all other electrical requirements. Implementation and monitoring of quality assessments. Supervises the Quality Control functions/activities of a project or its parts, including Quality Control inspection schedules and the collection of Quality Records. Review all submittals to insure compliance with the plans and specifi cation Daily/Weekly/ Monthly report to the Project Manager on project progress activities. Project reporting Mechanical Engineer is to be reported to Project Manager (PM)</p><p><strong>Desired Candidate Profile</strong></p><p>Excellent oral and written communication skills. Strong interpersonal skills and ability to work as part of a team Very Good Knowledge in written and oral English and Arabic languages is required. Experience in the usage of computers and software packages (Autodesk AutoCAD, Microsoft office and mechanical design software).</p>

<p>Wood is recruiting for a Mechanical Engineer to join its Iraq business unit focusing on ensuring that all work is completed without compromise to quality and is delivered according to the project schedule. This role is a full-time on-site role in Basra, Iraq with travel requirement.</p><p>This is an exciting opportunity for an experienced Mechanical Engineer to join our Iraq Business Unit. Our Clients and Projects Designing the future. Transforming the world. Wood has been awarded an Onshore Project to support an International Client operation by providing Brownfield Engineering &amp; Design Services. The Vision of this Contract is to enhance the production &amp; assets integrity across various locations. Team of Engineers and Designers based in Basra and Dubai supports execution of these projects. Projects under this contract focuses on Flare system revamps/re-ignition, Rehab of aging assets, BTEX emission control, Flare Gas Recovery &amp; Replacement/upgrade of obsolete equipment, piping &amp; systems.</p><p>Job Objectives:</p><ul><li>To always promote safe behavior</li><li>To ensure that all work is completed without compromise to quality and is delivered according to the project schedule.</li><li>To lia with the Client s Engineering, Operations and Maintenance staff as required to ensure a consistent approach to project completion.</li><li>To produce and verify piping engineering and design deliverables as and when required.</li><li>To co-ordinate with other disciplines during all stages of design development, construction, pre-commissioning, and start-up</li><li>To provide technical support to site as required</li><li>To assist in the coordination of all activities related to Piping engineering and design.</li><li>To identify any areas of concern with respect to progress and/or quality and recommend corrective actions as required.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>What makes you remarkable?</p><p>At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world s most critical challenges.</p><p>Expected:</p><ul><li>Bachelor s degree in an Engineering discipline</li><li>Minimum of 5-7 years piping design engineering experience in the oil and gas industries.</li><li>Onshore Oil and Gas related design experience.</li><li>Familiarity with International Design Guidelines and Standards.</li><li>A determination to continually improve safety in all aspects of plant design and operation.</li><li>Exposure to typical software packages (Auto Cad / PDMS / Micro station / PDS) that are used in piping engineering and design.</li><li>Extensive Brown field and green field experience in the oil and gas industry.</li><li>Proven capability in an engineering design company.</li><li>Experience of site-based project work involving field engineering and understanding of construction, commissioning, operations, or maintenance relativity is preferred.</li><li>Experience of working with multi-national and multi-cultural project teams is strongly preferred.</li><li>Commercially / contractually aware and able to manage design budgets.</li><li>A determination to continually improve safety in all aspects of plant design and operation.</li><li>Experience of participation in HAZOP &amp; HAZID studies is essential.</li><li>Familiarity with typical software packages that are used in pipeline engineering and designing.</li></ul>

<p>Job Summary We are seeking an experienced Mechanical Engineer to supervise and execute mechanical installation activities for static and rotating equipment on a large-scale construction project. The successful candidate will ensure that all mechanical works are completed safely, efficiently, and in accordance with approved drawings, project specifications, quality standards, and HSE requirements. The Mechanical Engineer will work closely with construction, QA/QC, commissioning teams, and subcontractors to ensure timely project delivery while maintaining the highest standards of safety and quality.</p><p>Key Responsibilities</p><ul><li>Supervise the installation of static equipment, including pressure vessels, heat exchangers, columns, tanks, separators, and other process equipment in accordance with approved drawings and specifications.</li><li>Oversee the installation, alignment, and grouting of rotating equipment, including pumps, compressors, blowers, and packaged units, following manufacturer recommendations and project standards.</li><li>Monitor piping installation activities, including supports, routing, fit-up, and hydrotest preparation, ensuring compliance with approved drawings.</li><li>Verify equipment foundations, anchor bolt positioning, base plate leveling, and readiness prior to equipment installation.</li><li>Ensure proper execution of cold and hot alignment, shaft alignment, and pre-commissioning mechanical checks for rotating equipment.</li><li>Review mechanical documentation, including general arrangement drawings, P&amp;IDs, isometric drawings, vendor documentation, and method statements, to ensure correct site implementation.</li><li>Coordinate with QA/QC teams for inspections, material verification, NDT activities, hydrostatic testing, and mechanical completion documentation.</li><li>Collaborate with civil, electrical, instrumentation, and other disciplines to ensure effective coordination of installation activities.</li><li>Ensure compliance with applicable international standards, project specifications, and quality requirements.</li><li>Support pre-commissioning and commissioning activities, including flushing, leak testing, mechanical run tests, and system handover.</li><li>Participate in progress meetings, monitor subcontractor performance, and provide regular progress updates to site management.</li><li>Promote and maintain a strong safety culture by ensuring compliance with HSE procedures, conducting risk assessments, and supporting safe lifting, rigging, and installation practices.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in Mechanical Engineering.</li><li>7 10 years of experience in mechanical construction and installation, including static and rotating equipment.</li><li>Strong knowledge of piping systems and general mechanical installation works.</li><li>Experience with equipment installation, alignment, rigging, and mechanical completion activities.</li><li>Ability to interpret engineering drawings, P&amp;IDs, isometrics, and vendor documentation.</li><li>Familiarity with international engineering and quality standards.</li><li>Strong coordination, communication, and problem-solving skills.</li><li>Experience working on large-scale construction projects is preferred.</li></ul>

<p>Under the overall guidance of the Project Manager and the direct supervision of the Lead Civil Engineer, the Civil Engineer is required to perform the following specific duties and responsibilities ensuring their effectiveness, transparency, and integrity:</p> <p>Plan, supervise, and manage the implementation of rehabilitation and/or construction works, ensuring alignment with project requirements, timelines, and budgets.</p> <p>Responsible for implementation and contributing to the preparation of the bill of quantities, as-built and construction drawings, Specifications and other engineering documents.</p> <p>Responsible for day-to-day site visit of the construction works, coordination with the contractors and suppliers according to the needs and requirements on site; Inspects and report on contractor s works in progress ensuring that the contractor meets client`s quality standards and implement the contract in accordance with the regulations.</p> <p>Provide support and guidance to the contractor and assists in resolving site problems, as necessary; Assist in the preparation of project plans, detailed schedules, and progress reports, and contribute to project closure activities and documentation.</p> <p>Responsible for supervision of site technical staff and consultants assigned to the project, and the assignment and monitoring of duties during the progress of works; Liaise with relevant government authorities, beneficiaries, and stakeholders to facilitate permits, secure approvals, and maintain effective working relationships.</p> <p>Embed sustainability dimensions including social and gender inclusion, as well as Health, Safety, Security, and Environmental (HSSE) aspects into the project during the design and construction phases; Ensure PSEA measures are implemented throughout the project implementation, as per the country PSEA action plan; Perform other related duties as required by the Project Manager.</p> <p>Supervise and monitor contractors setting-out and construction activities, ensuring full compliance with contract specifications, approved work plans, and project requirements in terms of scope, timeline, and budget; Conduct daily site visits to monitor work progress, identify issues, and propose practical engineering solutions in coordination with the Project Manager and Lead Civil Engineer; Responsible for preparation of progress reports on construction activities, according to the agreed timeframe of works and submission of such on a weekly basis to the Project Manager; Assess and report on the project closing plans, archiving of cost and progress report and hand over all related reports to the Project Manager; Evaluate and assess work schedules and programmes, including the comparison with the schedule baselines and reports to the Project Manager accordingly; Check all laboratory reports, operation and maintenance manuals, and keep records and report to the Project Manager accordingly; Assess the work activities of contractor/s, measure completed work, and make recommendations to the Project Manager for progress payments to contractors.</p> <p>Carry out on-site technical inspections and assessments to ensure that all construction activities comply with client`s quality standards and approved project specifications. Maintain accurate records and compile periodic and ad hoc reports in accordance with client`s procedures and reporting requirements.</p> <p>Conduct site inspections, testing, and quantity verification, and review/approve technical submittals including shop drawings, material approvals, and as-built documentation. Maintain records, compile periodic reports and any specific reports required by client`s standard procedures; Responsible for the preparation and verification of a database for the available materials shipped to the project, schedules of labor force, and monitoring of quality of such during the progress of works; Check, verify and approve the interim payments submitted by the Contractor/s and submit detailed reports to the Project Manager.</p> <p>Maintain accurate records of site activities, inspections, incidents and progress, ensuring timely submission of reports (weekly/monthly/quarterly). Support project closure through commissioning, handover and archiving of construction documentation. Assist in compiling periodic and specific reports, and ensure all project documentation is up-to-date and properly filed. Support the Project Team in overseeing change controls, risk and issue registers, and ensure timely and accurate reporting on project progress.</p> <p>Ensure that lessons learned and challenges are documented throughout the project implementation and shared with the project team; Participate in knowledge-sharing initiatives and contributing insights and lessons learned.</p> <p>Project reporting Civil Engineer will be reporting to Lead Civil Engineer and/or Project Manager (PM)</p><p><strong>Desired Candidate Profile</strong></p><h3>Key competencies</h3> <p>A minimum of 2 years of experience in development and coordination within agricultural, water resources , or related projects, particularly in irrigation (Open Channels and Closed Pipe System) and water-related activities, is required. Experience in site supervision, as well as monitoring and evaluation, is required. Experience working on international and/or local projects in conflict-affected areas is preferred. Experience in implementing and delivering projects for international organizations is considered an asset. Experience in report writing, data analysis, and document drafting is desirable. Experience in Health and Safety Management is desirable. Experience in quality assurance and quality control (QA/QC) for infrastructure projects is desirable. Experience working in the southern governorates is desirable.</p> <h3>Team management</h3> <p>This role has no team management</p> <h3>Further information</h3> <p>Disclaimer: At no stage of the recruitment process will CTG ask candidates for a fee. This includes during the application stage, interview, assessment and training. CTG has a zero tolerance to Sexual Exploitation and Abuse (SEA) which is outlined in its Code of Conduct. Protection from SEA is everyone s responsibility CTG encourages all candidates applying for this advertisement to ensure that their candidate profile is up to date with up to date experience / education / contact details, as this will help you being considered further in your application for this role.</p>

<p><h4>About company</h4> <p>Belong, connect, grow, with KBR! The KBR team delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals. KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Job purpose</h4> <p>The site planning engineer is responsible for developing and managing site planning activities to ensure that the project is completed on time and within budget. This role involves coordinating with multidisciplinary teams during the FEED and design phases, focusing on onshore and brownfield projects. The site planning engineer will play a crucial role in implementing effective planning strategies, ensuring resource optimization, and mitigating risks associated with site operations.</p> <h4>Job responsibilities</h4> <li>Develop and maintain detailed project schedules using suitable project management software.</li> <li>Collaborate with engineering, construction, and procurement teams to assess project requirements and ensure alignment with project scope.</li> <li>Perform risk analysis and assessment to identify potential issues in project execution and propose corrective actions.</li> <li>Monitor project progress and report regularly to senior management and project stakeholders.</li> <li>Facilitate site assessments and prepare relevant reports to support decision-making processes.</li> <li>Ensure compliance with safety regulations and promote a culture of safety on-site.</li> <li>Maintain effective communication with all project stakeholders and foster strong working relationships.</li> <li>Participate in project meetings, providing insights on planning and scheduling aspects.</li> <li>Contribute to continuous improvement efforts by proposing innovative planning solutions and methodologies.</li> <li>Assist in the development of progress reports and other documentation as required by project management.</li> <h4>Functional responsibilities</h4> <li>Implementing site logistics and resource plans, considering workforce and construction equipment requirements.</li> <li>Coordinating with the engineering team to integrate design changes into the project schedule effectively.</li> <li>Evaluating and monitoring subcontractor performance in relation to planning and execution benchmarks.</li> <li>Preparing and analyzing variance reports to identify schedule delays or inefficiencies.</li> <h4>Technical skills</h4> <li>Proficient in project scheduling software (e.g., Primavera P6, MS Project).</li> <li>Strong understanding of project management principles, methodologies, and tools.</li> <li>Familiarity with FEED (Front-End Engineering Design) processes and brownfield project challenges.</li> <li>Ability to read and interpret engineering drawings and specifications.</li> <li>Competent in risk management and mitigation strategies.</li> <h4>Soft skills</h4> <li>Excellent communication and interpersonal skills to work collaboratively with diverse teams.</li> <li>Strong analytical and problem-solving abilities.</li> <li>Proactive attitude and ability to work under tight deadlines and pressure.</li> <li>Strong organizational skills and attention to detail.</li> <h4>Qualification</h4> <p>Must have 10 years of experience in site planning and project controls.</p> <p><strong>Mandatory:</strong></p> <li>Bachelor’s degree in engineering in related field from reputed university.</li> <p><strong>Good to have:</strong></p> <li>Master’s degree in engineering in related field from reputed university.</li> <h4>Work environment</h4> <li>The role will primarily be based on-site in Iraq, requiring a commitment to a dynamic and fast-paced work environment. The position may involve working in varying weather conditions and adhering to local health and safety regulations.</li> <li>Flexibility in working hours may be required to accommodate project demands and deadlines.</li></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Senior Project Engineer (Power)<br><br><p><b>"Belong, Connect, Grow, with KBR!</b></p><br><br><br><p><b>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</b></p><br><br><p><b>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets."</b></p><br><br><br><br><p><b>Job Title: Project Engineer - Power (Local Talent)</b></p><br><br><p><b>28/28 Basra.</b></p><br><br><br><p><b>Job Purpose: </b></p><br><br><p>To support project team in executing EPC and Call off Contractors works to manage, supervise, and execute site activities related to Overhead Transmission Line (OHTL) construction, and delivery of projects by coordinating technical activities, managing contractor and consultant interfaces and ensuring compliance with project requirements, Client standards, safety standards, quality requirements, applicable regulations and schedule targets. The role is primarily site-based in Iraq, with regular coordination with multi-disciplinary teams.</p><br><br><br><p><b>Key Responsibilities: </b></p><br><br><ul><li>Site Execution &amp; Supervision: Oversee construction activities for OHTL, ensure work is carried out as per approved drawings, method statements, and specifications and monitor contractor performance and productivity.</li></ul><ul><li>Project planning &amp; Execution: Plan and execute OHTL Projects (typically 33kV to 132kV or higher voltages) by coordinating with engineering, procurement, and construction teams. Monitor project milestones and deliverables.</li></ul><ul><li>Review construction schedules and ensure adherence to timelines, identify site constraints and propose mitigation measures and liaise with local authorities and stakeholders when required. Prepare and present regular progress reports to senior management and clients.</li></ul><ul><li>Quality Control: Ensure compliance with project specifications, standards (IEC/IEEE), and client requirements. Conduct inspections, audits, and ensure proper documentation of quality records.</li></ul><ul><li>Commercial &amp; Contract Support: Assist in quantity verification and BOQ tracking, support in variation claims and change orders and review subcontractor invoices and progress billing.</li></ul><ul><li>Testing &amp; Commissioning: Support pre-commissioning and commissioning activities, Coordinate energization readiness with client and grid authorities, Close out punch points and handover documentation.</li></ul><br><p><b>Qualifications:</b></p><br><br><ul><li>Bachelor’s degree in electrical engineering.</li><li>10 years of experience in high voltage (HV/EHV) transmission line projects related to oil and gas industry.</li><li>Experience in Middle East (preferably Iraq) is an advantage</li></ul><br><p><b>Key Skills:</b></p><br><br><ul><li>Experience in Majnoon Oil Field, Basra, Iraq is an advantage</li><li>Strong Knowledge of Overhead Transmission Line (OHTL) construction.</li><li>Experience in Contract management with Commercial awareness</li><li>Strong communication and coordination skills</li><li>Mandatory experience in Oil and Gas industry.</li><li>Strong problem-solving and decision-making skills under site conditions.</li><li>Ability to manage multiple stakeholders in a multicultural environment.</li><li>Proficiency in project management tools (e.g., Primavera P6, MS Project) is an advantage</li><li>Fluent in both English and Arabic language (written and spoken).</li><li>Good knowledge of International Standards (IEC/IEEE)</li></ul><br><br><br> </div>

<p><h4>Petroleum engineer (reservoir)</h4> <p>Under direct supervision, this position is responsible for all phases of planning and execution on a small project or may be responsible for a segment of a larger project.</p> <p>Plans, organizes, coordinates, and controls small engineering projects in accordance with the established policies, procedures, systems, and requirements approved by the company.</p> <p>Contributes toward the day to day contact and communication with the client and focuses on providing client satisfaction.</p> <p>Possesses knowledge of the respective industry.</p> <p>Skills are typically acquired through completion of an undergraduate degree in engineering or project management and a minimum of 2 years related experience, with typical experience ranging from 3-7 years.</p></p><p></p>

<p>Launch Your Career as a Field Engineer with Weatherford Are you ready to kick-start your engineering career in a hands-on, high-impact role? At Weatherford, our Field Engineers are the essential connection between our cutting-edge technologies and the real-world challenges faced in oil and gas rigs. This is more than just a job it s an adventure. You ll be working in the field, often at remote rig sites, where you ll gain unmatched experience and responsibility from day one. Whether it s assembling equipment, analysing data, or solving problems on the fly, you ll be at the heart of operations that matter. Your Development Journey You ll be enrolled in our 4-year Field Engineer Technical Development Program, which blends classroom learning with real-world experience: Year 1: Work with guidance and take part in hands-on training at one of our global centers. Travel may be needed to gain real-world experience Year 2: Take on more responsibility at the wellsite while continuing to grow your technical skills through hands-on and classroom training Years 3 &amp; 4: Expanding your knowledge and skills, and may lead teams at the wellsite while serving as the main contact for our clients Your day-to-day could include: Prepare, deploy, and operate advanced downhole tools to meet specific wellsite objectives Utilize cutting-edge simulation software to design and optimize wellsite solutions tailored to client needs Analyse performance data and recommend improvements Manage equipment logistics and ensure seamless setup and operation at the rig site Create detailed post-job reports and share actionable insights with clients and internal teams Champion a culture of continuous improvement with a strong focus on safety, quality, and performance Deliver front-line engineering support to our customers throughout operations, resolving issues independently What We re Looking For Graduated with bachelor s degree in engineering (all fields) within the last 24 months No more than 1 year of experience English language fluent proficiency (written and spoken) Strong communication and interpersonal skills Ability to analyse complex problems, apply critical thinking, and make informed decisions A passion for hands-on work and learning in dynamic environments (onshore and offshore) What to Expect This role is physically and mentally demanding. You ll work 12-hour shifts (day or night), often in tough weather conditions. You may be away from home for extended periods, including weekends and holidays. But if you re up for the challenge, the rewards are big. You ll join one of our specialized product lines, such as: Completions Drilling Services Wireline Services Artificial Lift Well Services Managed Pressure&nbsp;</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Graduated with bachelor s degree in engineering (all fields) within the last 24 months</li><li>No more than 1 year of experience</li><li>English language fluent proficiency (written and spoken)</li><li>Strong communication and interpersonal skills</li><li>Ability to analyse complex problems, apply critical thinking, and make informed decisions</li><li>A passion for hands-on work and learning in dynamic environments (onshore and offshore)</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Petroleum Engineer (Reservoir)<br><br><p>Under direct supervision, this position is responsible for all phases of planning and execution on a small project or may be responsible for a segment of a larger project. Plans, organizes, coordinates, and controls small engineering projects in accordance with the established policies, procedures, systems, and requirements approved by the company. Contributes toward the day to day contact and communication with the client and focuses on providing client satisfaction. Possesses knowledge of the respective industry. Skills are typically acquired through completion of an undergraduate degree in Engineering or Project management and a minimum of 2 years related experience, with typical experience ranging from 3-7 years.</p><br><br><br><br><br> </div>

<ul><li>Fundamental of Process Engineering Knowledge such as Hydraulics, Heat Transfer, and Mass Transfer etc.</li><li>Knowledge of Process Chemistry, Trouble Shooting, Equipment Performance Evaluation, Analysis of Process Problems</li><li>Review of Project Documents such as FEED, PFD, P&ID and Process Design Package</li><li>Very Good Knowledge of Technical Writing</li><li>Computer Skill such as MS Office</li><li>Knowledge of Process Simulation Software such as Hysis, HTRI, Flare Net etc.</li><li>Fluent in English.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Education: Minimum B.S. in Chemical Engineer.</p><p>Years of Experience: Minimum 8 years in Oil and Gas Industry</p><p>Nature of Experience: Process Engineering in Oil Refinery with special focus on Distillation and Catalytic Process Areas such as Hydrotreating, Semi Regenerative Reformer, Isomerization Process. and Sweetening Process such as Naphtha and Kerosene Merox.</p>

<p><h4>Belong, connect, grow with KBR!</h4> <p>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</p> <p>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <p>KBR is looking for a Risk Coordinator to be based in Basra, Iraq – daily commute.</p> <p>The role is responsible for coordinating project risk management activities and supporting schedule integration across the project.</p> <h4>Accountability</h4> <p>The Schedule & Risk Coordinator is accountable for maintaining an effective Project Risk Management process, coordinating risk mitigation activities, and ensuring alignment of interface schedules and milestones across the CSSP Project. The role supports integration between WIP and Pipeline Project schedules, follows execution progress from the field, and provides reliable information to support project decision-making. The position serves as backup to the Planning Engineer when required; however, ownership of the Integrated Project Schedule, schedule development, forecasting, and baseline control remains with the Planning Engineer.</p> <h4>Qualifications/Experience required</h4> <ul> <li>Bachelor's degree in Engineering, Project Management, Construction Management, Risk Management, or a related discipline.</li> <li>Minimum 7-10 years of experience in Project Controls, Construction Planning, Risk Management, or Project Execution within major Oil & Gas, Energy, Infrastructure, or EPC projects.</li> <li>Extensive field construction experience with direct involvement in site execution, construction sequencing, workfront planning, contractor performance monitoring, and multidisciplinary team coordination.</li> <li>Proven experience in developing, maintaining, and challenging Project Risk Registers, risk assessments, mitigation plans, and risk management processes.</li> <li>Demonstrated experience in schedule integration, interface management, and coordination of critical milestones across multiple contractors, stakeholders, and project packages.</li> <li>Demonstrated ability to identify, assess, and mitigate construction, logistics, procurement, interface, and country-specific project risks.</li> <li>Proven ability to independently challenge contractor schedules, risk assessments, mitigation strategies, and execution plans through analytical review and field verification.</li> <li>Experience facilitating risk workshops and coordinating mitigation actions with risk owners and project stakeholders.</li> <li>Experience working in complex multi-contractor execution environments, including large-scale brownfield and greenfield developments.</li> <li>Ability to provide risk-based assessments and construction-driven recommendations to support project management decision-making.</li> </ul> <h4>Technical Skills</h4> <ul> <li>Strong knowledge of project risk management methodologies, quantitative and qualitative risk assessment techniques, and risk reporting systems.</li> <li>Strong understanding of construction execution processes, construction sequencing, work packaging, site productivity, and contractor performance monitoring.</li> <li>Strong capability to evaluate construction readiness, identify execution constraints, and assess impacts on project milestones and critical paths.</li> <li>Proficient in Primavera P6 and schedule analysis techniques, including critical path analysis, float consumption, schedule risk assessment, and recovery planning.</li> </ul> <h4>Personal Competencies</h4> <ul> <li>Strong analytical and problem-solving skills.</li> <li>Strong coordination and stakeholder management capabilities.</li> <li>Excellent communication and facilitation skills.</li> <li>Ability to interact effectively with engineering, construction, contractor, PMC, and project management teams.</li> <li>Strong organizational and follow-up skills with attention to detail.</li> <li>Ability to work in a multicultural and fast-paced project environment.</li> <li>Languages: English is mandatory, knowledge of French and Arabic is a plus.</li> </ul> <p>Interested and suitable candidates please apply for the role. Suitable candidates will be contacted directly.</p></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>INTECH Process Automation is seeking a skilled<strong> Instrument Design Engineer</strong> to join our Operations &amp; Maintenance (O&amp;M) team. The selected candidate will be responsible for <strong>instrumentation design, engineering deliverables, site surveys, technical coordination, and design verification</strong> for new and brownfield facilities. also ensuring that the designs are technically compliant, constructible, and properly controlled through procurement, installation, commissioning, MOC, and as-built stages.</p><br><p><strong>Key Responsibilities:</strong></p><br><ul><li>Prepare and check <strong>instrument design deliverables</strong> including P&amp;IDs, datasheets, instrument indexes, and specifications.</li><li>Develop and review <strong>I/O lists, loop diagrams, hook-up drawings, cable schedules, and JB schedules</strong>.</li><li>Prepare <strong>MTOs, instrument calculations, specifications, and material requirements</strong>.</li><li>Conduct <strong>site surveys, field verification, walkdowns, and brownfield assessments</strong>.</li><li>Ensure design compliance with <strong>project specifications, Company standards, and applicable engineering practices</strong>.</li><li>Coordinate instrumentation interfaces with <strong>ICSS, Electrical, Mechanical, Civil, Process, Operations, and Engineering</strong>.</li><li>Resolve <strong>technical queries, design discrepancies, and field engineering issues</strong>.</li><li>Support <strong>instrument procurement, technical bid evaluation, vendor document review, and material selection</strong>.</li><li>Support <strong>installation, inspection, testing, loop checking, commissioning, and startup</strong> activities.</li><li>Review and incorporate <strong>MOC changes, redlines, as-built drawings, and final engineering records</strong>.</li><li>Verify design deliverables for <strong>accuracy, consistency, constructability, and interface integrity</strong>.</li><li>Maintain engineering registers, calculations, drawings, and technical documentation in accordance with <strong>document control requirements</strong>.</li><li>Comply with <strong>Company procedures, HSE requirements, quality standards, and project controls</strong>.</li></ul> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>INTECH Process Automation is seeking a Seasoned<strong> Sr. Instrument Design Engineer</strong> to join our Operations &amp; Maintenance (O&amp;M) team. The selected candidate will be responsible for <strong>senior-level instrumentation and ICSS design assurance, technical reviews, and engineering coordination</strong> for new and brownfield projects. Ensure design deliverables, calculations, specifications, interfaces, and modifications are technically sound, compliant, constructible, maintainable, and properly reflected in as-built documentation.</p><br><p><strong>Key Responsibilities:</strong></p><br><ul><li>Lead <strong>instrumentation and ICSS design engineering</strong> and technical reviews.</li><li>Review and approve <strong>P&amp;IDs, datasheets, instrument indexes, I/O lists, loop diagrams, hook-ups, cable/JB schedules, MTOs, and specifications</strong>.</li><li>Review and approve <strong>instrument calculations, sizing, selection, and engineering deliverables</strong>.</li><li>Ensure compliance with <strong>COMPANY standards, project specifications, applicable codes, and engineering practices</strong>.</li><li>Review <strong>control philosophy, C&amp;E, SIL, SIS/ESD, and F&amp;G interfaces</strong> as applicable.</li><li>Lead <strong>brownfield surveys, constructability reviews, tie-ins, modifications, and MOC activities</strong>.</li><li>Review <strong>vendor technical documents, data sheets, drawings, and engineering submissions</strong>.</li><li>Manage technical interfaces with <strong>ICSS, Process, Electrical, Mechanical, Civil, Operations, Procurement, and Construction</strong>.</li><li>Resolve <strong>technical queries, design discrepancies, field issues, and engineering conflicts</strong>.</li><li>Ensure designs address <strong>installation, commissioning, maintainability, operability, and lifecycle requirements</strong>.</li><li>Support <strong>procurement, FAT/SAT, construction, loop checking, commissioning, and startup</strong>.</li><li>Review and control <strong>redlines, as-built drawings, design changes, and final engineering documentation</strong>.</li><li>Monitor design quality, progress, deliverables, and technical compliance.</li><li>Provide <strong>technical guidance and mentoring</strong> to Instrument Engineers and Designers.</li><li>Ensure compliance with <strong>HSE, quality, document control, MOC, and project requirements</strong>.</li></ul> </div>

<p><h4>Belong, connect, grow, with KBR!</h4> <p>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</p> <p>KBR provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Location</h4> <p>Iraq - KBR office<br> 28/28 rotation</p> <h4>Job purpose</h4> <p>Define piping design bases, codes, standards, and deliverables to ensure safe, reliable, and cost-effective solutions.<br> Single point of contact for piping deliverables and activities related to piping materials.<br> Interface with client, vendor, and other stakeholders for successful execution of the project.<br> Coordinate with multi-disciplinary teams (process, mechanical, civil, electrical, instrumentation) and vendors to ensure integrated piping systems.<br> Mentor engineers, drive quality, and ensure schedule adherence for piping deliverables across project phases.</p> <h4>Key responsibilities</h4> <ul> <li>Develop and review piping design basis, piping material specifications, datasheets, and technical bid evaluations.</li> <li>Ensure compliance with applicable codes and standards and project-specific requirements.</li> <li>Develop standard deliverables, various datasheets, and requisition packages related to piping.</li> <li>Experience in non-metallic piping (GRE / HDPE) procurement and specifications.</li> <li>Provide in-depth technical support for material selection involving metallic and non-metallic piping systems.</li> <li>Participate in material selection and corrosion review sessions to ensure suitable materials for service conditions.</li> <li>Review and approve technical deliverables (isometrics, P&IDs, BOMs, MOC/Change Notes, design change requests, technical queries).</li> <li>Demonstrated knowledge of material tracking throughout the project cycle.</li> <li>Understand the MOC process and employ effective change management throughout the lifecycle of the project.</li> <li>Contribute to lessons learnt from the project.</li> <li>Report to department manager/lead engineer for the project.</li> </ul> <h4>Experience</h4> <ul> <li>12+ years of experience in concept, FEED and detail engineering and EPCM experience in the oil & gas industry.</li> <li>Experience with Middle East clients like ADNOC, BP, BOC, PDO, Total Energies & Qatar Energies is highly preferred.</li> <li>Familiarity with onshore and offshore facilities and carried out greenfield and brownfield projects.</li> <li>Experience working with multicultural project teams across various project execution centers.</li> <li>Familiarity with international piping codes and standards such as ASME B31.3, ASTM, API, and NACE MR0175/ISO 15156.</li> </ul> <h4>Qualifications</h4> <ul> <li>Master or bachelor of engineering in a related field.</li> <li>Professional membership or relevant certifications (e.g., PE/Chartered Engineer) are a plus.</li> <li>Certification related to piping design or stress analysis is advantageous.</li> </ul> <h4>Technical skills</h4> <ul> <li>Strong background in piping design, engineering, stress analysis, and support design.</li> <li>Proficiency with piping design software and calculation tools (e.g., CAESAR, AutoPIPE and 3D modeling tools).</li> <li>Technical experience to prepare manhours estimation for different types of piping activities and deliverables of different phases of the project like select phase, FEED and execution.</li> <li>Familiarity with codes, standards, regulations and practices applicable to the design and construction of various facilities.</li> <li>Hands-on knowledge of codes and standards relevant to piping.</li> <li>Experience with high-pressure piping, thermal insulation, coatings, and corrosion considerations.</li> <li>Diverse working experience in project management, conceptual, FEED and detailed design, and construction.</li> <li>Knowledge of interdisciplinary work processes, interfaces, and deliverables.</li> <li>Responsible for the training and development of engineers in his/her team.</li> <li>Adherence to company processes and procedures and handle internal and external project audits.</li> <li>Proven experience in vendor qualification, technical bid evaluation, and factory audits.</li> </ul> <h4>Soft skills</h4> <ul> <li><strong>Communication:</strong> Clear, concise communication with technical and non-technical stakeholders.</li> <li><strong>Problem solving:</strong> Proactive identification and mitigation of piping-related risks.</li> <li><strong>Project management:</strong> Planning, scheduling, risk management, and deliverable tracking.</li> <li><strong>Influence & collaboration:</strong> Effective collaboration with clients, vendors, and internal teams.</li> <li><strong>Adaptability:</strong> Comfort in dynamic project environments and changing technical requirements.</li> <li><strong>Attention to detail:</strong> Rigorous approach to reviews, calculations, and documentation.</li> <li><strong>Safety mindset:</strong> Commitment to health, safety, and environment (HSE) standards.</li> <li><strong>Critical thinking:</strong> Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems.</li> </ul></p><p></p>

<p><h4>Job description</h4> <p><strong>Position:</strong> Lead process engineer<br> <strong>Company:</strong> KBR<br> <strong>Project:</strong> Majnoon<br> <strong>Location:</strong> Basra. 28/28 rotation</p> <p>Belong, connect, grow, with KBR! The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</p> <p>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Job purpose</h4> <p>The lead process engineer will own the technical integrity and successful delivery of process engineering scope across projects at different stages (conceptual studies, front-end design (FEED), and detailed engineering) for oil and gas field developments, including upstream offshore/onshore, gas treating, and downstream processing, in greenfield and brownfield environments. This role leads a team of engineers within a multidisciplinary project team, ensuring compliance with industry standards and project specifications, driving technical excellence, and fostering the development of Iraqi national staff.</p> <h4>Job responsibilities</h4> <ul> <li>Lead the preparation and review of process simulations and optimization studies for select/appraise stage projects, and champion the development of process flow schemes with heat and mass balances, equipment sizing, layout, etc., for costing and option selection.</li> <li>Own the detailed process engineering deliverables across all design phases, including process flow diagrams, piping & instrumentation diagrams, equipment datasheets, study reports/manuals, etc., ensuring alignment with international standards and project requirements.</li> <li>Oversee the review of process design work by third parties (vendors) and other offices; champion participation in HAZIDs, HAZOPs, SIL, hazard analysis reviews, and audits; ensure timely issue resolution and closure.</li> <li>Act as the primary technical interface with clients, communicating complex concepts clearly in both written and verbal formats; manage client expectations and confirm technical commitments.</li> <li>Mentor and actively develop Iraqi national staff to fulfill process engineering roles, providing structured on-the-job training, performance feedback, and growth opportunities.</li> <li>Ensure adherence to office quality and safety systems; lead the implementation of quality assurance/quality control practices within the process discipline.</li> <li>Collaborate with other disciplines to drive on-time, efficient, and safe project delivery; lead technical risk management and issue resolution within the process scope.</li> <li>Lead the technical supervision of FEED and detailed engineering activities for offshore/onshore greenfield/brownfield projects, ensuring design integrity and constructability.</li> <li>Support procurement activities by providing authoritative technical input for equipment selection and vendor evaluation, including evaluation of bid technical clarifications.</li> <li>Participate in commissioning and start-up activities, providing seasoned technical support and facilitating smooth handover to operations.</li> </ul> <h4>Functional responsibilities</h4> <ul> <li>Maintain and further develop process engineering standards, best practices, and technical governance within the project teams.</li> <li>Lead risk assessments and develop comprehensive mitigation strategies for process-related issues; own the risk register for the process discipline.</li> <li>Ensure timely delivery of all process engineering deliverables in accordance with project schedules; manage resource planning and workload distribution within the team.</li> <li>Provide technical leadership in design reviews, technical compliance, and governance for all process workstreams.</li> <li>Support and guide procurement activities with robust technical input for equipment specifications, vendor selection, and qualification.</li> <li>Lead commissioning and start-up activities from a process perspective, delivering technical support, commissioning procedures, and start-up readiness reviews.</li> </ul> <h4>Technical skills</h4> <ul> <li>Extensive experience in FEED and detailed engineering design for offshore/onshore greenfield/brownfield projects.</li> <li>Proficiency in process simulation software (e.g., Aspen HYSYS, Flare System Analyzer, ProMax, Pipesim, Pipenet, others).</li> <li>Strong knowledge of process safety management and hazard analysis techniques.</li> <li>Familiarity with relevant industry codes and standards (e.g., API, ASME, ISO).</li> <li>Experience with process control systems and instrumentation.</li> </ul> <h4>Soft skills</h4> <ul> <li>Leadership and team management skills.</li> <li>Strong communication and interpersonal skills.</li> <li>Ability to work collaboratively in a multidisciplinary environment.</li> <li>Problem-solving mindset with a focus on innovation and efficiency.</li> <li>Adaptability to changing project requirements and priorities.</li> </ul> <h4>Qualifications</h4> <ul> <li><strong>Mandatory:</strong> Bachelor’s degree in engineering (chemical, process, or related field).</li> <li><strong>Preferred:</strong> Master’s degree in engineering (chemical, process, or related field) and/or membership of internationally accepted applicable professional institute.</li> <li>10 years of experience in process engineering within engineering contractors, with a focus on FEED and EPC design for upstream onshore/offshore greenfield/brownfield projects.</li> </ul> <h4>Work environment</h4> <p>The role will be based in Iraq, requiring collaboration with local and international teams. The work environment is dynamic and fast-paced, necessitating flexibility and a proactive approach to challenges.</p></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Field Service Engineer - Mechanical Heavy-Duty Gas Turbine</b><br>&nbsp;</p><br><p><b>Are you a Field Specialist looking for a new opportunity?</b><br>&nbsp;</p><br><p><b>Do you like working in collaborative teams and solving critical issues?</b><br>&nbsp;</p><br><p><b>Join our Industrial and Energy Technology</b> <b>Team!</b></p><br><p>Our Industrial and Energy Technology (IET) operates across 120 countries and serves the entire energy value chain and industrial sector. We hold an extensive portfolio of rotating equipment, process flow, transmission technology and lifecycle services. Our Engineering Transformation team work to improve the quality of our Engineering processes.</p><br><p><b>Partner with the best</b><br>Coordinates and oversees work at a field site, providing quality service to the customer. Job roles may include sales, job design, execution, and follow-up activities. Provides the planning necessary for the job, including instructions to the crew and equipment used.<br>&nbsp;</p><br><p>As a Field Service Engineer, you will be responsible for:</p><br><ul><li><p>Performing minor/major maintenance of equipment following the TPS Service Site Quality Check Lists and procedures.</p><br></li><li><p>Providing records of all activities accomplished at the Customer Site to the TPS Supervisor promotes and maintains relations.</p><br></li><li><p>Executing all required responsibilities safely by following all TPS Service applicable processes and procedures.</p><br></li><li><p>Providing significant troubleshooting support on the equipment under maintenance and/or installation in the Field.</p><br></li></ul><p><br><b>Fuel your passion</b><br>To be successful in this role, you will:</p><br><ul><li><p>Have a Bachelor's degree OR Full-time Diploma in Mechanical Engineering.</p><br></li><li><p>Have experience of a minimum of 5 years in the Oil &amp; Gas industry within maintenance or installation field activities.</p><br></li><li><p>Have knowledge of rotating equipment, Installation, commissioning, startup, and maintenance of Heavy-Duty Gas Turbines (Frame 5/2, Frame 3, Frame 6B, Frame 7FA) and their Auxiliaries.</p><br></li><li><p>Be specialized in Heavy Duty Gas Turbine Products.</p><br></li><li><p>Have industry experience and TPS product line training, as required</p><br></li><li><p>Have acquired expertise in more than one TPS rotating Equipment product.</p><br></li></ul><p><br><b>Work in a way that works for you</b><br>We recognize that everyone is different and that the way in which people want to work and deliver at their best is different for everyone too. In this role, we can offer the following flexible working patterns:</p><br><ul><li><p>This role is working with our customers on-site in locations across the world. When onsite, you will have the flexibility to work in line with customer working patterns. When projects are complete, we offer you the opportunity to take extended leave before you take on your next project.</p><br></li></ul><p><br><b>Working with us</b><br>Our people are at the heart of what we do at Baker Hughes. We know we are better when all of our people are developed, engaged and able to bring their whole authentic selves to work. We invest in the health and well-being of our workforce, train and reward talent and develop leaders at all levels to bring out the best in each other.<br>&nbsp;</p><br><p><b>Working for you</b><br>Our inventions have revolutionized energy for over a century. But to keep going forward tomorrow, we know we have to push the boundaries today. We prioritize rewarding those who embrace change with a package that reflects how much we value their input. Join us, and you can expect:<br>&nbsp;</p><br><ul><li><p>Contemporary work-life balance policies and well-being activities</p><br></li><li><p>Comprehensive private medical care options</p><br></li><li><p>A safety net of life insurance and disability programs</p><br></li><li><p>Tailored financial programs</p><br></li><li><p>Additional elected or voluntary benefits</p><br></li></ul>The Baker Hughes internal title for this role is: Field Specialist IV - SVS - HDGT </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Wood is recruiting for a Control System Engineer to join its Iraq business unit focusing on design, configuration, testing, and commission control and automation systems.</p><br><p>This role is a full-time on-site role in Basra, Iraq with travel requirement.<br><strong>Rotation: </strong>28*28</p><br><br> Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy &amp; Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com<br> <b>Diversity Statement&nbsp;</b><br> We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.<br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Wood is recruiting for a Senior Control System Engineer to join its Iraq business unit focusing on design, configuration, testing, and commission control and automation systems.</p><br><p>This role is a full-time on-site role in Basra, Iraq with travel requirement.<br><strong>Rotation:</strong> 28*28<br> &nbsp;</p><br><br> Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy &amp; Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com<br> <b>Diversity Statement&nbsp;</b><br> We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.<br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Job Vacancy: Specification Sales Engineer– Plumbing pipes (PVC, HDPE..ETC)</b></p><p><b>Location:</b> Iraq (Remotly)</p><p><b>Company:</b> Bahrain Pipes</p><p><b>Key Responsibilities:</b></p><ul><li>Drive project sales for plumbing systems across building, infrastructure, and industry sectors in Iraq.</li><li>Provide technical expertise and design support to MEP consultants, contractors, and project stakeholders.</li><li>Review project specifications, drawings, and BOQs to ensure alignment with company products and international standards.</li><li>Conduct technical presentations and product demonstrations for clients and engineering firms.</li><li>Support product development by gathering Iraqi market feedback, competitor analysis, and MEP consultancy insights.</li></ul><p><b>Requirements &amp; Technical Skills:</b></p><ul><li>Bachelor’s Degree in Mechanical Engineering or a related field.</li><li>5–8 years of experience in Iraq within an MEP consultancy firm or technical sales, with a strong focus on plumbing systems (design &amp; execution).</li><li>Solid knowledge of international plumbing codes, water supply, drainage, and fire-fighting systems.</li><li>Familiarity with preparing and reviewing specifications, BOQs, and technical submittals.</li></ul><p><br></p><p><br></p><p><br></p><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p><b>Requirements &amp; Technical Skills:</b></p><ul><li>Bachelor’s Degree in Mechanical Engineering or a related field.</li><li>5–8 years of experience in Iraq within an MEP consultancy firm or technical sales, with a strong focus on plumbing systems (design &amp; execution).</li><li>Solid knowledge of international plumbing codes, water supply, drainage, and fire-fighting systems.</li><li>Familiarity with preparing and reviewing specifications, BOQs, and technical submittals.</li></ul><p><br></p><p><br></p></div>