وظائف مشرف صيانة في العراق

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Job Description: Maintenance Supervisor – Water Cup Production Line Department: Engineering and Maintenance Industry: Packaged Water / Water Cup Manufacturing Employment Type: Full-time Number of Vacancies: 1 Reports To: Factory Manager / Operations Manager Direct Reports: Senior Maintenance Technicians and Mechanical Maintenance Technicians Preferred Nationality: Indian/Iranian Job Purpose Lead the maintenance function for high-speed thermoforming/Form-Fill-Seal water cup production lines.<br> The Maintenance Supervisor will develop maintenance plans, manage the technical team, respond hands-on to major breakdowns, improve machine reliability, and ensure critical spare parts are available.<br> Key Responsibilities Prepare daily, weekly, monthly, quarterly, preventive, and shutdown maintenance plans.<br> Assign maintenance activities and supervise their safe, timely completion.<br> Lead troubleshooting during major breakdowns and recurring machine failures.<br> Conduct root-cause analysis and implement permanent corrective actions.<br> Reduce unplanned downtime and improve equipment reliability and availability.<br> Coordinate maintenance schedules and machine interventions with production.<br> Prepare maintenance checklists, SOPs, equipment histories, and technical reports.<br> Monitor equipment condition and recommend repairs, overhauls, or replacements.<br> Develop critical spare-parts lists for the complete production line.<br> Forecast spare-parts requirements and establish minimum and maximum stock levels.<br> Monitor spare-parts consumption, failure frequency, and component service life.<br> Prepare accurate technical specifications for purchasing spare parts and services.<br> Evaluate the technical suitability of proposed replacement components.<br> Train senior technicians, mechanical technicians, and selected production employees.<br> Ensure compliance with safety, food-hygiene, and lockout/tagout requirements.<br> Maintain proper housekeeping and tool control during maintenance activities.<br> Required Technical Experience Candidates must have direct, hands-on experience maintaining thermoforming/FFS machines that form, fill, and seal water cups, including: Plastic-film feeding, tracking, and tension control Heating and thermoforming stations Forming molds, vacuum systems, and cooling arrangements Water-filling mechanisms, nozzles, pumps, and volume adjustment Lid-film feeding and alignment systems Heat-sealing temperature, pressure, and timing control Cutting, punching, and cup-discharge systems Pneumatic cylinders, valves, regulators, and air preparation Bearings, chains, sprockets, timing belts, shafts, and gearboxes Linear guides, conveyors, lubrication systems, and machine alignment Mechanical synchronization of high-speed production equipment Experience with Thermonox, Beta-Pak, or technically similar high-speed machines is strongly preferred.<br> Required Qualifications Diploma or bachelor’s degree in Mechanical Engineering, Mechatronics, Industrial Maintenance, or a related discipline.<br> Minimum 7–10 years of relevant maintenance experience.<br> Demonstrated supervisory experience in a production environment.<br> Strong mechanical troubleshooting and root-cause-analysis ability.<br> Ability to prepare preventive maintenance plans, SOPs, checklists, and reports.<br> Working knowledge of maintenance KPIs, downtime analysis, and spare-parts control.<br> Ability to read mechanical drawings, manuals, parts diagrams, and specifications.<br> Willingness to work hands-on and respond to breakdowns outside normal hours when required.<br> Critical Selection Requirement General maintenance experience alone is not sufficient.<br> Candidates whose experience is limited to bottled-water filling lines, RO plants, automotive maintenance, building maintenance, utilities, or unrelated factory equipment will not qualify unless they also have substantial direct experience with thermoform/FFS water cup production machines.<br></span> </div>

<p>Purpose and Scope: Supervise the Maintenance cycle to ensure satisfactory completion of the program objectives. Essential Responsibilities: Supervises all maintenance operations for assigned equipment in accordance with applicable PWS, Company policies, OSHA, DOT, ANSI, ASME and applicable military regulations. Supervises shop foreman and mechanics to include vacation planning, discipline, conducting performance evaluations, and training. Establishes job priorities and estimates down time. Coordinates work flow for downed equipment waiting for parts to minimize backlog of work and cost to customer division. Provides direct support to internal/external customers to ensure compliance, tracking efficiency, burn rates, equipment usage and maximizing cost avoidance measures. Supervises the recovery operations of MHE, VE, CE, Heavy and Light vehicle maintenance throughout assigned area of operation. Coordinates the proper administration, maintenance and distribution of approved publications, warranty documentation, and LDD and ECOD documentation. Provides input to management for forecasting and monitoring of the stock levels for required service/repair parts and petroleum. Responsible for the accurate and timely submission of all required plans and reports. Maintains effective lines of formal and informal communication amongst all levels of management (and the customer) as required. Coordinates collection and preparation of activity reports. Supervise and coordinate all maintenance activities required per the preventive maintenance program. Responsible to provide for and enforce guidelines to ensure the health, safety, and welfare of all assigned employees. Acts as the POC for all maintenance issues in the absence of the Maintenance Manager. Monitors team development and ensures the execution of performance evaluations in accordance with DI policy. Conduct site visits to establish professional relationships with maintenance teams, site personnel, and the customer as needed. Perform all other position related duties as assigned or requested.</p><p><strong>Desired Candidate Profile</strong></p><h2>Minimum Position Knowledge, Skills, and Abilities Required:</h2><ul><li>Associate's degree in an associated discipline</li><li>Two (2) years of experience in related field can be substituted for each year of college</li><li>Six (6) to eight (8) years of logistics experience in a military/tactical environment</li><li>Prefer at least three (3) years in a maintenance supervisor environment</li><li>Understanding of organizational maintenance and supply concepts and procedures</li><li>Understanding of maintenance production, production control and knowledge of U.S Army maintenance support systems?</li><li>Knowledge of MHE, heavy truck and or heavy equipment</li><li>Knowledge of equipment parts acquisition, warranty, LDD, and ECOD submissions</li><li>Must possess knowledge of DOT, OSHA, ANSI, ASME, Military regulations standards and OEM requirements</li><li>Knowledge of diagnostics and ability to conduct technical research</li><li>Strong understanding of Department of Defense contracting policies and procedures</li><li>Outstanding problem solving skills and sound judgment</li><li>Excellent writing, communication, leadership and interpersonal skills</li><li>Demonstrative proficiency in Microsoft application</li><li>Must be able to meet deployment status requirements</li></ul><h2>Work Environment, Physical Demands, and Mental Demands:</h2><ul><li>Ability to stand, sit, walk, stoop, squat, crouch, kneel, push and pull</li><li>Ability to lift and carry up to fifty (50) pounds</li><li>Assist in lifting up to one hundred (100) pounds</li><li>Able to work in both inside and outside conditions</li><li>Be exposed to dust, fumes and gases from running engines and motors</li><li>Living and working conditions at the assignment location could be remote and uncomfortable</li><li>Long hours, exposure to weather and hazardous conditions</li><li>Personnel should be aware of moving on short notice and under adverse conditions</li><li>Ability to travel domestically and internationally</li></ul><h2>Other Responsibilities:</h2><ul><li>Safety - Amentum enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid/buddy aid responsibilities, participating in emergency response tasks and serving on safety committees and teams.</li><li>Quality - Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the Amentum Quality Policy and carry out job activities in compliance with applicable Amentum Quality System documents and customer contracts. Each employee must read and understand his/her Quality Management and Customer Satisfaction responsibilities.</li><li>Procedure Compliance - Each employee must read, understand and implement the general and specific operational, safety, quality and environmental requirements of all plans, procedures and policies pertaining to his/her job.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> We are supporting a leading international Oil &amp; Gas operator in Basra to hire an experienced - Maintenance Co-ordinator<br> This is a unique opportunity to contribute to a long-term, high-impact project, working alongside global experts on one of the region’s most strategic energy developments.<br>With over 1500 workers supporting our clients in Iraq, NES has deep insight into their culture and hiring expectations - allowing us to support candidates effectively throughout the hiring process. <br><strong>Job Title - Maintenance Co-ordinator</strong><br><strong>Department - Operations</strong><br><strong>Rotation&nbsp;- 5/2 /&nbsp;Water Flood 6/1&nbsp;</strong><br><strong>Site - (5 days week minimum &amp; 8 hours pe day on site)</strong><br>Qualifications &amp; Exeprience:<br>• Above 3 Years experience in O&amp;G industry<br>• Technical HNC certificate in Maintenance discipline role (or equivalent)<br>• Practical exposure to production/water facilities <br>• Ability to identify and assess safety hazards. <br>• Good understanding of Computerised maintenance management systems (CMMS – Maximo) <br>• Good understanding of maintenance planning and scheduling<br>• Ability to identify priorities of maintenance activities in a high activity environment. <br>• Work closely with the following roles to ensure day to day maintenance activities, maintenance projects and emergency maintenance activities are completed safely and efficiently.<br>• Good English language proficiency spoken and written<br><strong>Why This Opportunity Stands Out:</strong><br>• Long-term project stability (many contractors exceed 10 years)<br>• Exposure to a major global operator<br>• Opportunity to work alongside industry-leading professionals<br> <br>NES is the world’s leading engineering staffing provider, operating across Oil &amp; Gas, Power, Life Sciences, and infrastructure sectors.<br>80+ offices across 45 countries<br>24,000+ contractors globally and 10,000+ in the Middle East<br>Strong regional presence and long-term client partnership<br>With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil &amp; Gas, Power &amp; Renewables, Chemicals, Construction &amp; Infrastructure, Life Sciences, Mining and&nbsp;Manufacturing&nbsp;sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients. <br><br> </div>

<p>Reports to the Nominated Project Maintenance Supervisor. As directed, leads or carries out maintenance of field instrumentation such as field measuring &amp; indicating devices transmitters, control valves, emergency shutdown valves, motor operated valves, flame sensors and vibration probes loading arm instruments, gas &amp; steam turbine, compressor and burner management instrumentations system to retain them in functional and good operating order for reliable performance with minimum or no supervision. Ensures compliance with PPM requirements and prepares records of validation/calibration data and details of maintenance activities carried out. Guide instrument technicians for effective execution of jobs in time and achieving appropriate standard of work. Communicates with supervisor, maintenance technicians, and operations and provides feedback on job progress. Evaluates and reports on maintenance needs and priorities in his area of responsibility. Reviews work notifications, manages work orders and provides details of maintenance activities. Leads diagnosis and repair of faults &amp; breakdowns and reports operational and functional problems to supervisor and carries out remedial action under supervisor s direction. Participates in acceptance tests of new and upgrade systems, identifies deficiencies and provides punch list. Compiles and submits reports on incidents and failure investigations as and when required. Conduct toolbox meeting with other technicians and insist on strict adherence to Project safety rules. Ensures safety of personnel and equipment through compliance with company s Environmental Health and Safety policies, procedures and standards. Job Specific Requirements: Well versed in techniques and devices used for measurement of different process variables such as flow, temperature, pressure, density and level. Good knowledge and troubleshooting of pneumatic, hydraulic, electronic and digital instrumentation systems. Good knowledge in vibration measurement, burner management, gas turbine control &amp; compressor anti-surge control instrumentation. Should be able to understand Piping &amp; Instrumentation Diagrams, Process Flow Diagrams, Loop Drawings and Cause &amp; Effect, Function Block &amp; Ladder Logic Diagrams. Installation, calibration, testing and commissioning of instrumentation in a diversified oil &amp; gas processing, LNG or petrochemical plant. Good knowledge of gas turbine Speedtronic Mark V&amp; VI control, Bentley Nevada Vibration, compressor anti-surge control (CCC). Triconex &amp; standalone PLC, Distributed Control and Emergency Shutdown Systems would be advantageous. Familiar with a permit to work system and LOTO and temporary defeat system procedures.</p><p><strong>Desired Candidate Profile</strong></p><p>Minimum Higher Secondary School Education plus a three to five year technical diploma or certificate in Instrumentation or Electronics from a recognized institution.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Job Description: Mechanical Maintenance Technician – Water Cup Production Line Department: Engineering and Maintenance Industry: Packaged Water / Water Cup Manufacturing Employment Type: Full-time Number of Vacancies: 5 Reports To: Maintenance Supervisor / Senior Maintenance Technician Preferred Nationality: Indian/Iranian Job Purpose Perform hands-on preventive and corrective mechanical maintenance on high-speed thermoforming/Form-Fill-Seal water cup production machines.<br> The technician will inspect, service, repair, adjust, and troubleshoot equipment throughout the complete cup-forming, filling, sealing, cutting, and discharge process.<br> Key Responsibilities Perform scheduled preventive maintenance according to approved checklists.<br> Respond quickly to production-line breakdowns and restore equipment safely.<br> Inspect, dismantle, repair, replace, and reassemble mechanical components.<br> Clean, lubricate, adjust, and align machine parts and assemblies.<br> Check film feeding, heating, forming, filling, sealing, cutting, and discharge stations.<br> Replace bearings, chains, sprockets, timing belts, seals, guides, and other wear parts.<br> Service shafts, gearboxes, conveyors, pumps, pneumatic cylinders, and valves.<br> Assist with mold changes, machine setup, alignment, and trial production.<br> Identify abnormal noise, vibration, temperature, wear, leakage, and misalignment.<br> Report developing defects and required spare parts to senior maintenance personnel.<br> Record completed work, replaced components, and observed machine conditions.<br> Support major maintenance, overhauls, installations, and shutdown activities.<br> Work with production operators to identify and correct machine-related quality problems.<br> Maintain tools and keep maintenance areas clean and organized.<br> Follow all safety, food-hygiene, and lockout/tagout procedures.<br> Required Technical Experience Candidates should have strong practical knowledge of: Thermoforming stations and molds Plastic-film feeding, tracking, and tension systems Heating systems and heating zones Vacuum systems Pneumatic cylinders, valves, and air-control components Filling mechanisms, pumps, and filling nozzles Lid-film feeding and alignment systems Heat-sealing stations Cutting and punching systems Cup-discharge mechanisms Bearings, chains, sprockets, and timing belts Shafts, couplings, and gearboxes Linear guides and mechanical slides Conveyors and pumps Lubrication and preventive maintenance Candidates must be able to assist in diagnosing and correcting: Poor or incomplete cup forming Film misalignment, slipping, or incorrect tension Water leakage or incorrect filling volume Weak, uneven, or incomplete sealing Cutting and punching problems Machine timing and synchronization faults Abnormal vibration, noise, wear, or overheating Repeated machine stoppages Experience with Thermonox, Beta-Pak, or technically similar high-speed machines is strongly preferred.<br> Required Qualifications Technical certificate or diploma in Mechanical Maintenance, Industrial Maintenance, Mechanical Engineering, or a related field.<br> Minimum 3–5 years of practical experience on thermoforming/FFS cup production machines.<br> Strong mechanical fitting and troubleshooting skills.<br> Ability to use standard maintenance tools and precision measuring instruments.<br> Basic ability to read drawings, equipment manuals, and parts diagrams.<br> Ability to work safely under pressure during production breakdowns.<br> Willingness to work shifts, overtime, and emergency maintenance when required.<br> Ability to follow instructions and work effectively within a maintenance team.<br> Critical Selection Requirement This is a specialized production-line maintenance position.<br> Applicants whose experience is limited to bottled-water filling lines, RO plants, automotive maintenance, building maintenance, or general factory maintenance will not qualify unless they also possess direct thermoforming/FFS water cup production-machine experience.<br></span> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Job Description: Senior Maintenance Technician – Water Cup Production Line Department: Engineering and Maintenance Industry: Packaged Water / Water Cup Manufacturing Employment Type: Full-time Number of Vacancies: 2 Reports To: Maintenance Supervisor Supervisory Responsibility: Shift maintenance team when assigned Preferred Nationality: Indian/Iranian Job Purpose Provide senior-level, hands-on maintenance support for high-speed thermoforming/Form-Fill-Seal water cup production lines.<br> The Senior Maintenance Technician will lead shift maintenance work, diagnose complex faults, perform precision adjustments, and support preventive and major maintenance activities.<br> Key Responsibilities Implement daily, weekly, monthly, and shutdown maintenance plans.<br> Lead technicians during scheduled maintenance and production-line breakdowns.<br> Diagnose complex mechanical faults and production-related machine problems.<br> Perform machine setup, changeovers, adjustment, alignment, and synchronization.<br> Inspect machine condition and identify developing faults before failure occurs.<br> Carry out preventive, corrective, and major maintenance activities.<br> Escalate recurring faults and support root-cause analysis.<br> Record completed work, findings, parts used, and follow-up actions.<br> Identify future maintenance requirements and critical spare-parts needs.<br> Monitor recurring component failures and recommend technical improvements.<br> Assist with installation, commissioning, and overhaul work when required.<br> Train mechanical technicians and selected production operators.<br> Coordinate with production personnel during adjustment and test runs.<br> Assume responsibility for the maintenance team when the supervisor is unavailable.<br> Follow food-safety, personal-safety, lockout/tagout, and housekeeping requirements.<br> Required Technical Experience Candidates must have practical experience across the complete thermoforming/FFS water cup process: Film feeding, tracking, tensioning, and alignment Heating-zone inspection and adjustment Thermoforming stations, molds, vacuum, and cooling Filling systems, pumps, valves, nozzles, and volume adjustment Lid-film feeding, tracking, and tension control Heat-sealing temperature, pressure, timing, and alignment Cutting, punching, and cup-discharge mechanisms Pneumatic cylinders, solenoid valves, regulators, and air systems Bearings, chains, sprockets, timing belts, shafts, and gearboxes Linear guides, conveyors, lubrication systems, and mechanical alignment Candidates must be able to troubleshoot: Poor or incomplete cup forming Film tracking and alignment problems Water leakage and inaccurate filling volume Weak, incomplete, or uneven sealing Cutting and punching defects Mechanical timing and synchronization problems Abnormal vibration, noise, and overheating Repeated stoppages and intermittent machine faults Experience with Thermonox, Beta-Pak, or technically similar high-speed machines is strongly preferred.<br> Required Qualifications Technical diploma or equivalent qualification in Mechanical Maintenance, Mechanical Engineering, Mechatronics, or a related field.<br> Minimum 5–7 years of direct experience on thermoforming/FFS cup production machines.<br> Ability to lead maintenance work during shifts and breakdowns.<br> Strong practical knowledge of precision fitting, alignment, and adjustment.<br> Ability to interpret machine manuals, drawings, and spare-parts diagrams.<br> Basic ability to prepare maintenance records and technical reports.<br> Ability to train and guide junior technicians.<br> Willingness to work shifts and respond to urgent breakdowns.<br> Critical Selection Requirement Applicants must have direct experience maintaining machines that form, fill, and seal plastic water cups.<br> Experience limited to bottled-water lines, RO systems, vehicles, buildings, utilities, or general factory maintenance does not meet the position’s core requirement.<br></span> </div>

<p><h4>Purpose and scope:</h4> <p>Supervise the maintenance cycle to ensure satisfactory completion of the program objectives.</p> <h4>Essential responsibilities:</h4> <ul> <li>Supervise all maintenance operations for assigned equipment in accordance with applicable PWS, company policies, OSHA, DOT, ANSI, ASME and applicable military regulations.</li> <li>Supervise shop foreman and mechanics to include vacation planning, discipline, conducting performance evaluations, and training.</li> <li>Establish job priorities and estimate down time.</li> <li>Coordinate workflow for downed equipment waiting for parts to minimize backlog of work and cost to customer division.</li> <li>Provide direct support to internal and external customers to ensure compliance, tracking efficiency, burn rates, equipment usage and maximizing cost avoidance measures.</li> <li>Supervise the recovery operations of MHE, VE, CE, heavy and light vehicle maintenance throughout assigned area of operation.</li> <li>Coordinate the proper administration, maintenance and distribution of approved publications, warranty documentation, and LDD and ECOD documentation.</li> <li>Provide input to management for forecasting and monitoring of the stock levels for required service and repair parts and petroleum.</li> <li>Responsible for the accurate and timely submission of all required plans and reports.</li> <li>Maintain effective lines of formal and informal communication amongst all levels of management and the customer as required.</li> <li>Coordinate collection and preparation of activity reports.</li> <li>Supervise and coordinate all maintenance activities required per the preventive maintenance program.</li> <li>Provide for and enforce guidelines to ensure the health, safety, and welfare of all assigned employees.</li> <li>Act as the point of contact for all maintenance issues in the absence of the Maintenance Manager.</li> <li>Monitor team development and ensure the execution of performance evaluations in accordance with DI policy.</li> <li>Conduct site visits to establish professional relationships with maintenance teams, site personnel, and the customer as needed.</li> <li>Perform all other position related duties as assigned or requested.</li> </ul> <h4>Minimum position knowledge, skills, and abilities required:</h4> <ul> <li>Associate's degree in an associated discipline.</li> <li>Two years of experience in related field can be substituted for each year of college.</li> <li>Six to eight years of logistics experience in a military or tactical environment.</li> <li>Prefer at least three years in a maintenance supervisor environment.</li> <li>Understanding of organizational maintenance and supply concepts and procedures.</li> <li>Understanding of maintenance production, production control and knowledge of U.S. Army maintenance support systems.</li> <li>Knowledge of MHE, heavy truck and/or heavy equipment.</li> <li>Knowledge of equipment parts acquisition, warranty, LDD, and ECOD submissions.</li> <li>Must possess knowledge of DOT, OSHA, ANSI, ASME, military regulations, standards and OEM requirements.</li> <li>Knowledge of diagnostics and ability to conduct technical research.</li> <li>Strong understanding of Department of Defense contracting policies and procedures.</li> <li>Outstanding problem solving skills and sound judgment.</li> <li>Excellent writing, communication, leadership and interpersonal skills.</li> <li>Demonstrative proficiency in Microsoft applications.</li> <li>Must be able to meet deployment status requirements.</li> </ul> <h4>Work environment, physical demands, and mental demands:</h4> <ul> <li>Ability to stand, sit, walk, stoop, squat, crouch, kneel, push and pull.</li> <li>Ability to lift and carry up to fifty pounds.</li> <li>Assist in lifting up to one hundred pounds.</li> <li>Able to work in both inside and outside conditions.</li> <li>Be exposed to dust, fumes and gases from running engines and motors.</li> <li>Living and working conditions at the assignment location could be remote and uncomfortable.</li> <li>Long hours, exposure to weather and hazardous conditions.</li> <li>Personnel should be aware of moving on short notice and under adverse conditions.</li> <li>Ability to travel domestically and internationally.</li> </ul> <h4>Other responsibilities:</h4> <ul> <li><strong>Safety:</strong> Enforce a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid and buddy aid responsibilities, participating in emergency response tasks and serving on safety committees and teams.</li> <li><strong>Quality:</strong> Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the Quality Policy and carry out job activities in compliance with applicable Quality System documents and customer contracts. Each employee must read and understand his or her Quality Management and Customer Satisfaction responsibilities.</li> <li><strong>Procedure compliance:</strong> Each employee must read, understand and implement the general and specific operational, safety, quality and environmental requirements of all plans, procedures and policies pertaining to his or her job.</li> </ul></p><p></p>

<p>Supervise the Maintenance cycle to ensure satisfactory completion of the program objectives.</p><p>Supervises all maintenance operations for assigned equipment in accordance with applicable PWS, Company policies, OSHA, DOT, ANSI, ASME and applicable military regulations.</p><p>Supervises shop foreman and mechanics to include vacation planning, discipline, conducting performance evaluations, and training.</p><p>Establishes job priorities and estimates down time.</p><p>Coordinates work flow for downed equipment waiting for parts to minimize backlog of work and cost to customer division.</p><p>Provides direct support to internal/external customers to ensure compliance, tracking efficiency, burn rates, equipment usage and maximizing cost avoidance measures.</p><p>Supervises the recovery operations of MHE, VE, CE, Heavy and Light vehicle maintenance throughout assigned area of operation.</p><p>Coordinates the proper administration, maintenance and distribution of approved publications, warranty documentation, and LDD and ECOD documentation.</p><p>Provides input to management for forecasting and monitoring of the stock levels for required service/repair parts and petroleum.</p><p>Responsible for the accurate and timely submission of all required plans and reports.</p><p>Maintains effective lines of formal and informal communication amongst all levels of management (and the customer) as required.</p><p>Coordinates collection and preparation of activity reports.</p><p>Supervise and coordinate all maintenance activities required per the preventive maintenance program.</p><p>Responsible to provide for and enforce guidelines to ensure the health, safety, and welfare of all assigned employees.</p><p>Acts as the POC for all maintenance issues in the absence of the Maintenance Manager.</p><p>Monitors team development and ensures the execution of performance evaluations in accordance with DI policy.</p><p>Conduct site visits to establish professional relationships with maintenance teams, site personnel, and the customer as needed.</p><p>Perform all other position related duties as assigned or requested.</p><p>Ability to stand, sit, walk, stoop, squat, crouch, kneel, push and pull</p><p>Ability to lift and carry up to fifty (50) pounds</p><p>Assist in lifting up to one hundred (100) pounds</p><p>Able to work in both inside and outside conditions</p><p>Be exposed to dust, fumes and gases from running engines and motors</p><p>Living and working conditions at the assignment location could be remote and uncomfortable</p><p>Long hours, exposure to weather and hazardous conditions</p><p>Personnel should be aware of moving on short notice and under adverse conditions</p><p>Ability to travel domestically and internationally</p><p>Amentum enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid/buddy aid responsibilities, participating in emergency response tasks and serving on safety committees and teams.</p><p>Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the Amentum Quality Policy and carry out job activities in compliance with applicable Amentum Quality System documents and customer contracts. Each employee must read and understand his/her Quality Management and Customer Satisfaction responsibilities.</p><p>Each employee must read, understand and implement the general and specific operational, safety, quality and environmental requirements of all plans, procedures and policies pertaining to his/her job.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Associate's degree in an associated discipline</li><li>Two (2) years of experience in related field can be substituted for each year of college</li><li>Six (6) to eight (8) years of logistics experience in a military/tactical environment</li><li>Prefer at least three (3) years in a maintenance supervisor environment</li><li>Understanding of organizational maintenance and supply concepts and procedures</li><li>Understanding of maintenance production, production control and knowledge of U.S Army maintenance support systems</li><li>Knowledge of MHE, heavy truck and or heavy equipment</li><li>Knowledge of equipment parts acquisition, warranty, LDD, and ECOD submissions</li><li>Must possess knowledge of DOT, OSHA, ANSI, ASME, Military regulations standards and OEM requirements</li><li>Knowledge of diagnostics and ability to conduct technical research</li><li>Strong understanding of Department of Defense contracting policies and procedures</li><li>Outstanding problem solving skills and sound judgment</li><li>Excellent writing, communication, leadership and interpersonal skills</li><li>Demonstrative proficiency in Microsoft application</li><li>Must be able to meet deployment status requirements</li></ul>