وظائف ميكانيكى سفن

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>INTECH Process Automation is seeking a seasoned <strong>Permit Coordinator</strong> to join our Operations &amp; Maintenance (O&amp;M) team. The selected candidate will be responsible to coordinating <strong>Permit to Work (PTW)</strong> activities, ensuring permits are properly prepared, reviewed, issued, monitored, suspended, handed over, and closed in accordance with <strong> procedures</strong>. Supports safe execution of maintenance, construction, commissioning, and SIMOPS activities.</p><br><p><strong>Key Responsibilities:</strong></p><br><ul><li>Coordinate preparation, review, and status of <strong>PTW, work permits, certificates, and supporting documents</strong>.</li><li>Verify permit prerequisites including <strong>isolations, LOTO, gas testing, JSA/RAMS, toolbox talks, and required approvals</strong>.</li><li>Coordinate <strong>SIMOPS</strong> interfaces and identify conflicts between simultaneous work activities.</li><li>Verify required <strong>mechanical, electrical, process, and instrument isolations</strong> are established before work starts.</li><li>Coordinate <strong>bypass, override, impairment, and temporary isolation</strong> requirements with responsible teams.</li><li>Monitor permit validity, conditions, extensions, suspensions, and <strong>safe work status</strong>.</li><li>Support safe <strong>permit suspension, handover, revalidation, and closure</strong> following work completion or operational changes.</li><li>Maintain accurate <strong>permit registers, status trackers, isolation records, and supporting documentation</strong>.</li><li>Coordinate with <strong>Operations, Maintenance, Construction, Commissioning, HSE, and contractors</strong> regarding permit requirements and interfaces.</li><li>Identify incomplete prerequisites, conflicting activities, or unsafe conditions and <strong>escalate before work proceeds</strong>.</li><li>Support permit audits and verify compliance with<strong> PTW procedures and site requirements</strong>.</li><li>Ensure proper communication of <strong>permit conditions, restrictions, emergency requirements, and work-area controls</strong>.</li><li>Maintain records for <strong>permit history, isolations, suspensions, handovers, and closeout</strong>.</li><li>Participate in <strong>toolbox meetings, site coordination, and work-front reviews</strong> as required.</li><li>Comply with <strong>PTW, LOTO, SIMOPS, HSE, process safety, and Company requirements</strong>.</li></ul> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>INTECH Process Automation is seeking a Seasoned<strong> Sr. Instrument Design Engineer</strong> to join our Operations &amp; Maintenance (O&amp;M) team. The selected candidate will be responsible for <strong>senior-level instrumentation and ICSS design assurance, technical reviews, and engineering coordination</strong> for new and brownfield projects. Ensure design deliverables, calculations, specifications, interfaces, and modifications are technically sound, compliant, constructible, maintainable, and properly reflected in as-built documentation.</p><br><p><strong>Key Responsibilities:</strong></p><br><ul><li>Lead <strong>instrumentation and ICSS design engineering</strong> and technical reviews.</li><li>Review and approve <strong>P&amp;IDs, datasheets, instrument indexes, I/O lists, loop diagrams, hook-ups, cable/JB schedules, MTOs, and specifications</strong>.</li><li>Review and approve <strong>instrument calculations, sizing, selection, and engineering deliverables</strong>.</li><li>Ensure compliance with <strong>COMPANY standards, project specifications, applicable codes, and engineering practices</strong>.</li><li>Review <strong>control philosophy, C&amp;E, SIL, SIS/ESD, and F&amp;G interfaces</strong> as applicable.</li><li>Lead <strong>brownfield surveys, constructability reviews, tie-ins, modifications, and MOC activities</strong>.</li><li>Review <strong>vendor technical documents, data sheets, drawings, and engineering submissions</strong>.</li><li>Manage technical interfaces with <strong>ICSS, Process, Electrical, Mechanical, Civil, Operations, Procurement, and Construction</strong>.</li><li>Resolve <strong>technical queries, design discrepancies, field issues, and engineering conflicts</strong>.</li><li>Ensure designs address <strong>installation, commissioning, maintainability, operability, and lifecycle requirements</strong>.</li><li>Support <strong>procurement, FAT/SAT, construction, loop checking, commissioning, and startup</strong>.</li><li>Review and control <strong>redlines, as-built drawings, design changes, and final engineering documentation</strong>.</li><li>Monitor design quality, progress, deliverables, and technical compliance.</li><li>Provide <strong>technical guidance and mentoring</strong> to Instrument Engineers and Designers.</li><li>Ensure compliance with <strong>HSE, quality, document control, MOC, and project requirements</strong>.</li></ul> </div>

<p>Warehouse Keeper ensures accurate handling, storage, and movement of parts and materials to support workshop and sales operations efficiently and reliably. Tasks • Deliver and supervise warehouse tasks to ensure proper storage/recording. • Perform routine inventory tasks including checks on quality and availability. • Transport goods efficiently within established procedures. • Maintain documentation for tracking warehouse activity. • Follow safety instructions to protect self and others.</p><p><strong>Desired Candidate Profile</strong></p><div><p>Vocational or Technical Diploma in a relevant field (automotive, mechanical, or related).</p><p>1 to 3 years of experience in a similar role.</p><p>Skill • Inventory Control &amp; Stock Accuracy • Warehouse Operations &amp; Housekeeping • ERP / Warehouse Management Systems Usage • Attention to Detail &amp; Documentation • Health, Safety &amp; Environment Awareness</p><p>Competencies • Customer Focus: Building strong customer relationships and delivering customer-centric solutions. • Ensures Accountability: Holding self and others accountable to meet commitments. • Action Oriented: Taking on new opportunities and tough challenges with a sense of urgency, high energy, and enthusiasm. • Optimizes Work Processes: Knowing the most effective and efficient processes to get things done, with a focus on continuous improvement. • Collaborates: Building partnerships and working collaboratively with others to meet shared objectives. • Nimble Learning: Actively learning through experimentation when tackling new problems, using both successes and failures as learning fodder. • Situational Adaptability: Adapting approach and demeanor in real time to match the shifting demands of different situations. • Self-Development: Actively seeking new ways to grow and be challenged using both formal and informal development channels.</p></div>

<p>Perform welding inspection and verification activities to ensure that all welding operations are carried out in strict compliance with approved WPS/PQR, project technical specifications, contractual requirements, applicable regulations, and relevant international/industry standards. Monitor and control all welding-related quality processes, evaluate welding performance, verify welder qualifications and certifications, and ensure that all welding activities comply with the specified acceptance criteria and quality requirements. Support the Site QA/QC Manager in maintaining welding quality records, traceability documentation, inspection and test reports (ITRs), and inspection status records, ensuring full compliance with TotalEnergies Technical Specifications and the project's Quality Management System (QMS) requirements.</p><p>Diploma, Higher National Diploma (HND), or Degree in Welding Engineering, Mechanical Engineering, Metallurgical Engineering, or a related engineering discipline. Possession of a valid international welding inspection certification, such as one of the following: CSWIP 3.1 / 3.2 AWS Certified Welding Inspector (AWS-CWI) ISO 9712 Level II certification (preferably in VT, MT, PT, and/or UT) Additional qualifications such as BGAS, API, or ASME certifications are considered an advantage. Minimum 8 years of experience in welding inspection within the oil & gas, petrochemical, refinery, pipeline, or onshore EPC construction industries. Sound knowledge of international welding codes, standards, and specifications, including but not limited to: ASME Section IX ASME B31.3 / B31.4 / B31.8 API 1104 ISO 3834 EN standards AWS D1.1 ISO 17635–17637 Familiarity with TotalEnergies General Specifications (GS), Company Procedures (CP), and project-specific quality requirements is highly preferred.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>INTECH Process Automation is seeking a seasoned <strong>HVAC Technician</strong> to join our Operations &amp; Maintenance (O&amp;M) team. The selected candidate will be responsible for the <strong>maintenance, troubleshooting, inspection, and repair of HVAC and package cooling systems</strong> supporting analyzers, control rooms, ICSS, electrical/instrument rooms, and other critical facilities. Ensures reliable environmental conditions and safe operation of HVAC equipment.</p><br><p><strong>Key Responsibilities:</strong></p><br><ul><li>Perform <strong>preventive and corrective maintenance</strong> on HVAC units, package cooling systems, split/ducted systems, and associated equipment.</li><li>Inspect and maintain <strong>compressors, condensers, evaporators, fans, filters, coils, belts, dampers, drains, and refrigerant circuits</strong>.</li><li>Monitor and record <strong>temperature, humidity, pressure, refrigerant condition, and operating parameters</strong>.</li><li>Troubleshoot and repair <strong>HVAC mechanical, electrical, control, and instrumentation faults</strong>.</li><li>Maintain environmental conditions for <strong>analyzer shelters, control rooms, ICSS rooms, equipment rooms, and other critical areas</strong>.</li><li>Check and maintain <strong>thermostats, sensors, controllers, contactors, relays, motors, and control panels</strong>.</li><li>Perform <strong>filter cleaning/replacement, coil cleaning, refrigerant checks, leak detection, and system servicing</strong>.</li><li>Support <strong>refrigerant recovery, charging, and handling</strong> in accordance with approved procedures and safety requirements.</li><li>Identify abnormal conditions, recurring failures, and equipment deterioration; perform <strong>basic troubleshooting and root-cause assessment</strong> and escalate major defects.</li><li>Verify HVAC performance after maintenance and ensure <strong>environmental conditions are restored before return to service</strong>.</li><li>Maintain accurate <strong>maintenance records, operating logs, checklists, work orders, and CMMS documentation</strong>.</li><li>Coordinate with <strong>Instrumentation, Electrical, ICSS, Analyzer, Operations, and Maintenance teams</strong> for equipment interfaces and shutdown activities.</li><li>Maintain HVAC tools, test equipment, spare parts, and consumables in <strong>safe and serviceable condition</strong>.</li><li>Follow <strong>PTW, LOTO, refrigerant safety, electrical safety, HSE, and procedures</strong>.</li></ul> </div>

<p>We are seeking an experienced <strong>MEP Project Manager</strong> to lead and manage the MEP execution works for a prestigious <strong>5-Star Hotel Project</strong> in Erbil, Iraq.</p><p>### Key Responsibilities</p><ul><li>Lead and manage the execution of all MEP works, including HVAC, Plumbing, Fire Fighting, Electrical, ELV, and associated building services.</li><li>Develop, monitor, and update the MEP project schedule using <strong>Primavera P6</strong>.</li><li>Manage subcontractors, suppliers, site engineers, supervisors, and technical teams.</li><li>Coordinate with the client, consultant, main contractor, and all project disciplines.</li><li>Review shop drawings, material submittmits, method statements, technical queries, and procurement schedules.</li><li>Monitor project progress, costs, quality, safety, manpower, materials, and resource allocation.</li><li>Identify potential delays and risks and implement corrective and recovery plans.</li><li>Lead coordination meetings and prepare progress, planning, and management reports.</li><li>Manage testing, commissioning, snagging, authority approvals, and final handover.</li><li>Ensure all MEP works comply with approved drawings, specifications, project requirements, and applicable standards.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>### Requirements</p><ul><li>Bachelor s Degree in Mechanical or Electrical Engineering.</li><li>Minimum <strong>10 years</strong> of experience in MEP project execution and management.</li><li>Proven experience managing MEP works for <strong>4-star or 5-star hotel projects</strong>.</li><li><strong>PMP certification is required.</strong></li><li>Strong practical experience in <strong>Primavera P6</strong> is required.</li><li>Strong knowledge of HVAC, Plumbing, Fire Fighting, Electrical, ELV, and building services systems.</li><li>Proven ability to manage subcontractors, multidisciplinary teams, budgets, schedules, and project risks.</li><li>Strong leadership, communication, coordination, and problem-solving skills.</li><li>Good command of English, both written and spoken.</li><li>Willingness to relocate and work in <strong>Erbil, Iraq</strong>.</li></ul><p>### What We Offer</p><ul><li>Competitive compensation package.</li><li>Opportunity to manage a prestigious hospitality project.</li><li>Professional and stable working environment.</li></ul>

<p>We are seeking an experienced <strong>MEP Project Manager</strong> to lead and manage the MEP execution works for a prestigious <strong>5-Star Hotel Project</strong> in Erbil, Iraq.</p><p>### Key Responsibilities</p><ul><li>Lead and manage the execution of all MEP works, including HVAC, Plumbing, Fire Fighting, Electrical, ELV, and associated building services.</li><li>Develop, monitor, and update the MEP project schedule using <strong>Primavera P6</strong>.</li><li>Manage subcontractors, suppliers, site engineers, supervisors, and technical teams.</li><li>Coordinate with the client, consultant, main contractor, and all project disciplines.</li><li>Review shop drawings, material submittmits, method statements, technical queries, and procurement schedules.</li><li>Monitor project progress, costs, quality, safety, manpower, materials, and resource allocation.</li><li>Identify potential delays and risks and implement corrective and recovery plans.</li><li>Lead coordination meetings and prepare progress, planning, and management reports.</li><li>Manage testing, commissioning, snagging, authority approvals, and final handover.</li><li>Ensure all MEP works comply with approved drawings, specifications, project requirements, and applicable standards.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>### Requirements</p><ul><li>Bachelor s Degree in Mechanical or Electrical Engineering.</li><li>Minimum <strong>10 years</strong> of experience in MEP project execution and management.</li><li>Proven experience managing MEP works for <strong>4-star or 5-star hotel projects</strong>.</li><li><strong>PMP certification is required.</strong></li><li>Strong practical experience in <strong>Primavera P6</strong> is required.</li><li>Strong knowledge of HVAC, Plumbing, Fire Fighting, Electrical, ELV, and building services systems.</li><li>Proven ability to manage subcontractors, multidisciplinary teams, budgets, schedules, and project risks.</li><li>Strong leadership, communication, coordination, and problem-solving skills.</li><li>Good command of English, both written and spoken.</li><li>Willingness to relocate and work in <strong>Erbil, Iraq</strong>.</li></ul><p>### What We Offer</p><ul><li>Competitive compensation package.</li><li>Opportunity to manage a prestigious hospitality project.</li><li>Professional and stable working environment.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>HVAC Specialist-Onsite<br><br><p><b>Position title: </b>HVAC Specialist</p><br><br><p><b>Position status: </b>Expat</p><br><br><p><b>Position reports to: </b>Electrical Team Lead</p><br><br><p><b>Department: </b>Maintenance</p><br><br><p><b>Rotation pattern: </b>28/28 (Expat)</p><br><br><br><p><b>Job purpose</b></p><br><br><br><p>To maintain, repair HVAC system in process area. Perform preventive &amp; shutdown maintenance, inspection, repair, installation and commissioning of HVAC i.e. Heating, Ventilation, Air Conditioning Systems in Majnoon.</p><br><br><br><p><b>Duties and responsibilities</b></p><br><br><ul><li><span>Maintain, install, and repair HVAC, air conditioning, ventilation and heating systems.</span></li><li><span>Troubleshoot issues with industrial HVAC system.</span></li><li><span>Conduct performance tests with specialized tools and adjust system settings to keep the system reliable.</span></li><li>Downloading and uploading programs in PLCs such as Siemens, Schneider, ABB, Mitsubishi, Allen Bradly etc.</li><li><span>Trouble shoot and repair the smart VRF HVAC units which are having BLDC motors and programmed electronic cards.</span></li><li><span>Carry out brazing with oxy acetylene set to replace compressors, rectifying copper pipe leaks and modifying refrigerant pipe lines</span></li><li><span>Repair or replace defective parts in units and equipment and their controls, including thermostats, automatic switches, fan controls, log switches, damper motors, louvers, relays, filters, controls, belts, compressors, heat exchangers, high limit controls, pressure controls,</span></li><li><span>Operate a variety of hand and power tools, </span><span>brazing</span><span> torch, vacuum pump, test equipment utilized.</span></li><li><span>Install and calibrate systems; install copper tubing and repair pipes and tubing as necessary; test joints and insulate pipes of HVAC, air conditioning systems; flush rebuild pressure and temperature.</span></li><li><span>Install compressors, evaporators, motors, ducts, and piping as well as mechanical/electrical controls; read and interpret blueprints/diagrams.</span></li><li><span>Troubleshoot breakdowns and repair malfunctioning HVAC systems and components; utilize measuring and testing instruments</span></li><li><span>Demonstrated exceptional time management skills; organized and prioritized high volume of work orders to ensure maximum quality</span></li></ul><br><p><b>Qualifications &amp; Experience</b></p><br><br><ul><li>University degree in related discipline.</li><li>8-10 Years’ experience of HVAC system and AC units within a large industrial plant, preferably in the Oil and Gas industry.</li><li>Understanding of advanced principles of air conditioning, refrigeration and heating.</li><li>Proficient in reading schematics and work plans.</li></ul><br><p><b>Computer and software skills</b></p><br><br><ul><li>Excel – advanced</li><li>Word – Intermediate</li><li>Power Point - Intermediate</li></ul><ul><li>Intermediate Proficiency in English verbal &amp; written.</li></ul><p><b><u>Skills </u></b></p><br><br><ul><li><span>Knowledge of Materials, methods and tools used in the operation and repair of HVAC.</span></li><li><span>knowledge of Welding and soldering techniques.</span></li><li><span>Proper methods of storing equipment </span></li><li><span>Aware about PTW system and working in Oil field </span></li><li><span>Have IT Skills (Excel, PowerPoint, Microsoft office, SharePoint etc…)</span></li><li><span>Communicate effectively both orally and in writing.</span></li><li><span>Work cooperatively with others.</span></li><li><span>Work independently with little direction. </span></li><li><span>Meet schedules and time lines.</span></li><li><span>Maintain routine records and prepare reports.</span></li></ul><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>HVAC Specialist<br><br><p><b>Position title: </b>HVAC Specialist</p><br><br><p><b>Position status: </b>Expat</p><br><br><p><b>Position reports to: </b>Electrical Team Lead</p><br><br><p><b>Department: </b>Maintenance</p><br><br><p><b>Rotation pattern: </b>28/28 (Expat)</p><br><br><br><p><b>Job purpose</b></p><br><br><br><p>To maintain, repair HVAC system in process area. Perform preventive &amp; shutdown maintenance, inspection, repair, installation and commissioning of HVAC i.e. Heating, Ventilation, Air Conditioning Systems in Majnoon.</p><br><br><br><p><b>Duties and responsibilities</b></p><br><br><ul><li><span>Maintain, install, and repair HVAC, air conditioning, ventilation and heating systems.</span></li><li><span>Troubleshoot issues with industrial HVAC system.</span></li><li><span>Conduct performance tests with specialized tools and adjust system settings to keep the system reliable.</span></li><li>Downloading and uploading programs in PLCs such as Siemens, Schneider, ABB, Mitsubishi, Allen Bradly etc.</li><li><span>Trouble shoot and repair the smart VRF HVAC units which are having BLDC motors and programmed electronic cards.</span></li><li><span>Carry out brazing with oxy acetylene set to replace compressors, rectifying copper pipe leaks and modifying refrigerant pipe lines</span></li><li><span>Repair or replace defective parts in units and equipment and their controls, including thermostats, automatic switches, fan controls, log switches, damper motors, louvers, relays, filters, controls, belts, compressors, heat exchangers, high limit controls, pressure controls,</span></li><li><span>Operate a variety of hand and power tools, </span><span>brazing</span><span> torch, vacuum pump, test equipment utilized.</span></li><li><span>Install and calibrate systems; install copper tubing and repair pipes and tubing as necessary; test joints and insulate pipes of HVAC, air conditioning systems; flush rebuild pressure and temperature.</span></li><li><span>Install compressors, evaporators, motors, ducts, and piping as well as mechanical/electrical controls; read and interpret blueprints/diagrams.</span></li><li><span>Troubleshoot breakdowns and repair malfunctioning HVAC systems and components; utilize measuring and testing instruments</span></li><li><span>Demonstrated exceptional time management skills; organized and prioritized high volume of work orders to ensure maximum quality</span></li></ul><br><p><b>Qualifications &amp; Experience</b></p><br><br><ul><li>University degree in related discipline.</li><li>8-10 Years’ experience of HVAC system and AC units within a large industrial plant, preferably in the Oil and Gas industry.</li><li>Understanding of advanced principles of air conditioning, refrigeration and heating.</li><li>Proficient in reading schematics and work plans.</li></ul><br><p><b>Computer and software skills</b></p><br><br><ul><li>Excel – advanced</li><li>Word – Intermediate</li><li>Power Point - Intermediate</li></ul><ul><li>Intermediate Proficiency in English verbal &amp; written.</li></ul><p><b><u>Skills </u></b></p><br><br><ul><li><span>Knowledge of Materials, methods and tools used in the operation and repair of HVAC.</span></li><li><span>knowledge of Welding and soldering techniques.</span></li><li><span>Proper methods of storing equipment </span></li><li><span>Aware about PTW system and working in Oil field </span></li><li><span>Have IT Skills (Excel, PowerPoint, Microsoft office, SharePoint etc…)</span></li><li><span>Communicate effectively both orally and in writing.</span></li><li><span>Work cooperatively with others.</span></li><li><span>Work independently with little direction. </span></li><li><span>Meet schedules and time lines.</span></li><li><span>Maintain routine records and prepare reports.</span></li></ul><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>INTECH Process Automation is looking for an experienced <strong>Lifting Engineer </strong>to join our <strong>Operations &amp; Maintenance (O&amp;M) team</strong>. The successful candidate will be Responsible for <strong>lift engineering, lifting plans, load calculations, crane selection, rigging arrangements, and critical lifting activities</strong>. </p><br><p><strong>Key Responsibilities:</strong></p><br><ul><li>Prepare and review <strong>lifting plans, lift studies, method statements, and risk assessments</strong> for routine and critical lifts.</li><li>Perform <strong>load, radius, lifting capacity, center-of-gravity, sling-angle, and rigging calculations</strong>.</li><li>Select suitable <strong>cranes, lifting equipment, rigging accessories, and configurations</strong> based on load and site conditions.</li><li>Verify <strong>crane capacity charts, boom configuration, radius, ground conditions, outrigger loads, and ground bearing requirements</strong>.</li><li>Develop and verify <strong>rigging arrangements, lifting points, slings, shackles, spreader beams, lifting beams, and other accessories</strong>.</li><li>Review equipment <strong>certificates, inspection status, SWL/WLL, and certification validity</strong> before lifting activities.</li><li>Verify competency and certification of <strong>Crane Operators, Riggers, Banksmen/Signalers, and Lifting Supervisors</strong>.</li><li>Conduct or support <strong>site surveys, lift-path assessments, access reviews, and obstruction/clearance checks</strong>.</li><li>Supervise or provide engineering support for <strong>critical, complex, tandem, restricted-access, and high-risk lifting operations</strong>.</li><li>Ensure lifting activities comply with approved <strong>lift plans, exclusion zones, communication arrangements, and control measures</strong>.</li><li>Coordinate with <strong>Construction, Maintenance, Mechanical, Instrumentation, Logistics, HSE, Crane Operators, Riggers, and other representatives</strong>.</li><li>Review lifting-related <strong>method statements, JSA/RAMS, temporary works, and technical queries</strong>.</li><li>Monitor lifting execution and stop or escalate activities where <strong>conditions deviate from the approved plan or become unsafe</strong>.</li><li>Maintain accurate <strong>lift plans, calculations, equipment certificates, inspection records, and lifting documentation</strong>.</li><li>Support <strong>lifting audits, incident investigations, lessons learned, and improvement of lifting practices</strong>.</li><li>Ensure compliance with applicable <strong>lifting standards, procedures, PTW, HSE, and critical-lift requirements</strong>.</li></ul> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>INTECH Process Automation is seeking a seasoned <strong>Electrical Engineer (Explosion Proof)</strong> to join our Operations &amp; Maintenance (O&amp;M) team. The selected candidate will be responsible for <strong>hazardous-area electrical and instrumentation Ex inspection, assessment, and compliance verification</strong>. Reviews installations, identifies nonconformities, defines corrective actions, and verifies compliant restoration in accordance with <strong>IEC 60079, approved Ex certification, and Company requirements</strong>.</p><br><p><strong>Key Responsibilities:</strong></p><br><ul><li>Inspect and assess <strong>Ex electrical and instrumentation equipment and installations</strong> in hazardous areas.</li><li>Verify compliance with applicable <strong>IEC 60079 requirements, Ex protection concepts, equipment certification, and installation practices</strong>.</li><li>Inspect <strong>Ex glands, cable entries, seals, plugs, enclosures, junction boxes, terminals, and associated accessories</strong>.</li><li>Verify <strong>earthing, bonding, cable routing, segregation, enclosure integrity, and mechanical condition</strong>.</li><li>Review <strong>Ex certificates, equipment markings, installation records, inspection reports, and hazardous-area dossiers</strong>.</li><li>Identify, classify, and document <strong>Ex defects, nonconformities, unauthorized modifications, and certification discrepancies</strong>.</li><li>Define appropriate <strong>rectification and corrective actions</strong> based on defect severity and applicable standards.</li><li>Verify completion of corrective actions and <strong>compliant restoration of Ex installations</strong> before return to service.</li><li>Support <strong>initial, periodic, detailed, and visual Ex inspections</strong> as applicable to the installation and inspection program.</li><li>Review hazardous-area equipment selection and installation against <strong>area classification, EPL/zone requirements, gas group, temperature class, and Ex protection type</strong>.</li><li>Provide technical support for <strong>Ex equipment installation, maintenance, modification, replacement, and commissioning</strong>.</li><li>Coordinate with <strong>Electrical, Instrumentation, ICSS, Maintenance, Construction, QA/QC, HSE, and approved Ex inspection personnel</strong>.</li><li>Maintain accurate <strong>Ex inspection registers, defect lists, certification records, dossiers, photographs, and closeout documentation</strong>.</li><li>Support <strong>MOC, audits, incident investigations, and reliability initiatives</strong> related to hazardous-area equipment.</li><li>Ensure all activities comply with <strong>IEC 60079, Company procedures, PTW/LOTO, hazardous-area requirements, and HSE standards</strong>.</li></ul> </div>

<p>The Construction Manager is responsible for the complete administration and organization of construction and field personnel and directs the field effort through the activities of his staff. He reports directly to the Project Manager. Contributes to Construction Safety by reducing site exposure through modularization, standardization and maximizing off plot construction. Contributes in the development of of brownfield construction strategies and planning initiatives for project opportunities pre FID. Focusses on addressing and removing hurdles to efficient construction and actively monitors productivity on site, advising (acting on behalf of) the construction manager of ways to improve the productivity metrics. Identifies and monitors brownfield construction planning initiatives for approved projects post FID. Will input into enhancing the design, contracting strategy and execution planning all in consideration of constructability through input into HSE, cost, schedule and quality. Acts as the Construction interface from the point of project inception to the point the project starts field execution. Ability to effectively work on more than one project at a time.</p><p><strong>Desired Candidate Profile</strong></p><p>Skills are typically acquired through completion of an undergraduate degree in architecture, engineering, or business administration, preferred Engineering branches., i.e. Mechanical, Civil, electrical, chemical, or equivalent. 5 years of experience in project management which includes experience in facility construction or remodeling and management experience. Preferred Experience: Minimum 15 years experience in Oil and Gas related project Design and Engineering Minimum 10 years experience in Oil and Gas Project Delivery as a Umbrella Contract Construction Manager function in a multidiscipline Workforce Experience in Productivity measurement resource based planning (Level 4 Scheduling) Strong Managerership and teambuilding skills Supervisory experience</p>

<p><h4>Job description</h4> <p>The computer systems analyst I provides several phases of the required systems analysis where the nature of the system is predetermined, uses established fact-finding approaches, knowledge of pertinent work processes and procedures, and familiarity with related computer programming practices, system software, and computer equipment.</p> <p>This analyst provides several phases of the required systems analysis where the nature of the system is predetermined, uses established fact-finding approaches, knowledge of pertinent work processes and procedures, and familiarity with related computer programming practices, system software, and computer equipment.</p> <p>Carries out fact finding and analyses as assigned, usually of a single activity or a routine problem, and applies established procedures where the nature of the system, feasibility, computer equipment, and programming language have already been decided.</p> <p>May assist a higher-level systems analyst by preparing the detailed specifications required by computer programmers from information developed by the higher-level analyst.</p> <p>May research routine user problems and solve them by modifying the existing system when the solutions follow clear precedents.</p> <p>Prepare cost and deadline estimates as required for review.</p> <p>Works independently to adapt guides to specific situations; resolve problems and deviations according to established practices; and obtain advice where precedents are unclear or not available.</p> <p>Carries out objectives, priorities, and deadlines as defined by the supervisor.</p> <p>May supervise technician and others who assist in specific assignments.</p> <p>Will have some variation within and across contracts and may list additional or specific job duties related to assigned function/level which are not aforementioned.</p> <h4>Minimum requirements</h4> <p>High school diploma or equivalent is required. Certification of education level is required.</p> <p>CompTIA Security+ certification.</p> <p>Must possess two (2) years of related experience in computer systems analysis.</p> <p>Ability to obtain and maintain a US government SECRET clearance is required (prefer active Secret clearance). US citizenship is required for SECRET clearance at this work location.</p> <p>A valid U.S. passport is required to travel internationally. Passport must have a minimum of 6 blank pages and 2 plus year validity on expiration date of passport.</p> <p>Must be able to pass CENTCOM medical requirements for deployment.</p> <p>Must be able to obtain a visa in CENTCOM locations.</p> <h4>Knowledge & skills</h4> <ul> <li>Requires competence in most phases of system analysis.</li> <li>Systems analysis and design skills in an area such as a record keeping or scientific operation.</li> <li>Knowledge of pertinent system software and computer equipment.</li> <li>Knowledge of work processes, applicable regulations, and practices of the assigned subject-matter area.</li> <li>Ability to recognize probable interactions of related computer systems and predict impact of a change in assigned system.</li> <li>Good problem-solving skills.</li> <li>Self-motivated and the ability to work independently.</li> </ul> <h4>Physical requirements/working environment</h4> <ul> <li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li> <li>Must be able to lift/push/pull minimum of 50 pounds.</li> <li>May work in maintenance shop or outside.</li> <li>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</li> <li>May be exposed to extreme noise from operating equipment.</li> <li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li> <li>May be expected to work in austere environments and all weather conditions.</li> </ul></p><p></p>

<p><h4>Job description</h4> <p>The computer systems analyst I provides several phases of the required systems analysis where the nature of the system is predetermined, uses established fact-finding approaches, knowledge of pertinent work processes and procedures, and familiarity with related computer programming practices, system software, and computer equipment.</p> <p>This analyst provides several phases of the required systems analysis where the nature of the system is predetermined, uses established fact-finding approaches, knowledge of pertinent work processes and procedures, and familiarity with related computer programming practices, system software, and computer equipment.</p> <p>Carries out fact finding and analyses as assigned, usually of a single activity or a routine problem, and applies established procedures where the nature of the system, feasibility, computer equipment, and programming language have already been decided.</p> <p>May assist a higher-level systems analyst by preparing the detailed specifications required by computer programmers from information developed by the higher-level analyst.</p> <p>May research routine user problems and solve them by modifying the existing system when the solutions follow clear precedents.</p> <p>Prepare cost and deadline estimates as required for review.</p> <p>Works independently to adapt guides to specific situations; resolve problems and deviations according to established practices; and obtain advice where precedents are unclear or not available.</p> <p>Carries out objectives, priorities, and deadlines as defined by the supervisor.</p> <p>May supervise technician and others who assist in specific assignments.</p> <p>Will have some variation within and across contracts and may list additional or specific job duties related to assigned function/level which are not aforementioned.</p> <h4>Minimum requirements</h4> <p>High school diploma or equivalent is required. Certification of education level is required.</p> <p>CompTIA Security+ certification.</p> <p>Must possess two (2) years of related experience in computer systems analysis.</p> <p>Ability to obtain and maintain a US government SECRET clearance is required (prefer active Secret clearance). US citizenship is required for SECRET clearance at this work location.</p> <p>A valid U.S. passport is required to travel internationally. Passport must have a minimum of 6 blank pages and 2 plus year validity on expiration date of passport.</p> <p>Must be able to pass CENTCOM medical requirements for deployment.</p> <p>Must be able to obtain a visa in CENTCOM locations.</p> <h4>Knowledge & skills</h4> <ul> <li>Requires competence in most phases of system analysis.</li> <li>Systems analysis and design skills in an area such as a record keeping or scientific operation.</li> <li>Knowledge of pertinent system software and computer equipment.</li> <li>Knowledge of work processes, applicable regulations, and practices of the assigned subject-matter area.</li> <li>Ability to recognize probable interactions of related computer systems and predict impact of a change in assigned system.</li> <li>Good problem-solving skills.</li> <li>Self-motivated and the ability to work independently.</li> </ul> <h4>Physical requirements/working environment</h4> <ul> <li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li> <li>Must be able to lift/push/pull minimum of 50 pounds.</li> <li>May work in maintenance shop or outside.</li> <li>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</li> <li>May be exposed to extreme noise from operating equipment.</li> <li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li> <li>May be expected to work in austere environments and all weather conditions.</li> </ul></p><p></p>

<h2>The role</h2><p>This is an exciting opportunity for an experienced QA/QC Lead to join our Iraq Business Unit.</p><h2>Our Clients and Projects</h2><p>Designing the future. Transforming the world. Wood is an integral part of operations in Iraq, and we are continuing to grow our footprint across the country. With a 90-year heritage, 10 major contracts and over 850 employees, we have the skills, expertise and asset knowledge to support clients to deliver energy security and decarbonisation ambitions. Wood excels in supporting our clients to deliver complex upstream and midstream oil and gas projects in Iraq delivering maintenance, modifications and engineering solutions. We are committed to decarbonising existing assets, producing cleaner energy and developing a sustainable national workforce, ensuring the long-term growth of the region.</p><h2>What we can offer</h2><ul><li>Meaningful and interesting projects Delivered to high profile clients and complex projects in Iraq</li><li>Commitment to Diversity and Inclusion ; we are an organisation actively committed to diversity and inclusion across our business with employee networks committed to giving all employees a voice</li><li>Competitive salary with regular salary reviews to ensure we are rewarding at the right level in line with the market</li><li>Medical Insurance: Ensures inpatient and outpatient medical care is available should you require treatment.</li><li>Commitment to continued professional development; development plans that are tailored to your individual needs and interests</li><li>Global connections : join experts around the world who are at the leading edge of our industry, shaping the standards of our profession</li><li>Long Service Award: Wood values the commitment and loyalty of our people. Celebrating Long Service provides an opportunity for the business to demonstrate their appreciation of the hard work, dedication and many years services of our employees at 5-year service milestones</li></ul><h2>Job Objectives:</h2><p>The QA/QC Lead will support the delivery of Quality and materials Inspection activities as part of a broader asset integrity management programme for major oil and gas operating assets. The role will be responsible for undertaking Quality assessments, supporting Quality studies, developing technical deliverables and providing engineering expertise to multidisciplinary teams involved in the operation and maintenance of oil and gas facilities. The successful candidate will work as part of Wood's Iraq team and contribute to the ongoing Quality reliability and performance of critical production assets.</p><h2>Nationality Requirement:</h2><p>This position is open to Iraqi nationals only .</p><h2>Core Responsibilities:</h2><ul><li>Directly supervise and lead QC inspectors and NDT personnel, fostering a collaborative and high-performing team environment. Define individual responsibilities, provide effective training and mentorship, and conduct performance evaluations. Schedule and assign work for efficient workflow and adherence to production schedules.</li><li>Monitoring of all Quality control and surveillance activities for several construction contracts, including planning and implementation by Contractors Quality control plans and Inspection Test Plans.</li><li>Supervise and control the Contractor s to carry out the Quality Control &amp; Surveillance works during prefabrication and under construction to check that the work is in conformity with COMPANY specifications and procedures</li><li>Prepare / Develop Quality Control Procedures as required such as NDT, Inspection, Coating as required in line with TEEPRH</li><li>Coordinate with TPI agencies, Suppliers, other affiliates and discipline for inspection and surveillance monitoring of the Project.</li><li>To supervise and control the Critical activities, such as welding, non-destructive examinations, and performance testing. (Including increased inspection levels when performance requirements are not met)</li><li>To check all the process of the field joint, coating traceability, welding, NDT, hydrotest, SAT till the RFC and FRSU.</li><li>Manage non-conformance reports (NCRs), initiating root cause analysis and driving corrective action implementation.</li><li>Report and Update all Quality issues on site together with a regular and brief description of all non-conformances issued and all related correction, corrective, and preventive actions</li><li>Maintain Quality documentation and records for each area of activity, and system index for all discipline works and each file and records.</li><li>Ensure inspection equipment used in the project are calibrated, and certified by independent, recognized, &amp; accredited testing laboratory as per their manufacturer recommendations</li><li>Ensure the receipt, control, and transmission of all Contractors' documents</li><li>Monitor and trend quality key performance indicators (KPIs) to identify areas for improvement.</li><li>Review and audit the Quality Management System (QMS) to ensure internal and external compliance.</li><li>Assist with complaint resolution and implement corrective and preventive actions (CAPA).</li><li>Participate actively in daily production meetings, providing QC and NDT updates.</li><li>Coordinate equipment calibration and verification, maintaining accurate records.</li><li>Produce detailed reports, presentations, and assignments regularly to a high standard.</li><li>Foster open communication with team members, colleagues, and stakeholders.</li><li>Possess excellent written and verbal communication skills.</li><li>Strong problem-solving and decision-making skills with the ability to think independently.</li><li>Comprehensive knowledge of mechanical and electrical commissioning procedures.</li><li>Proficiency in Microsoft Office Suite (Excel, Word, PowerPoint, Access) and Adobe Acrobat.</li></ul><p><strong>Desired Candidate Profile</strong></p><h2>What makes you remarkable?</h2><p>At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world s most critical challenges.</p><p>Expected: Bachelor's Degree in Mechanical Engineering, or related discipline. AMPP/NACE Senior Corrosion Technologist or equivalent preferred. API 571 certification preferred. API 580 certification adventageous.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are looking for the right people people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world s largest providers of products and services to the global energy industry. Job Duties </p><p>Under broad direction from the Senior Petrophysics Advisor and the IAM leadership and with support from engineering and operations staff across all Halliburton product service lines (PSLs), the Petrophysics Advisor works within a senior, multi-discipline petrotechnical team to develop and apply advanced formation evaluation techniques in support of the evaluation and development of potentially large and challenging oil and gas field development projects for potential investment by IAM. The Petrophysics Advisor will support Technical Asset Team evaluation work by providing both qualitative and quantitative analysis of data relevant to formation evaluation and reservoir characterization. This evaluation work will require integration of information derived from various sources including open and cased hole well logs, mud logs, sidewall cores, full cores, RFT/MDT pressure test/fluid samples, mini-fracs, Diagnostic Fracture Injectivity Tests, and geochem analysis. Additionally, the role will also perform advanced geomechanics evaluation in order to make predictions related to wellbore stability assessment, formation sanding potential, pore pressure prediction, principal present-day stress analysis, and mechanical property determination useful in defining barriers to hydraulic fracture growth. Additional responsibilities for this role include supporting Technical Asset Team senior management in defining standardized, best practice processes to support systematic yet efficient and effective evaluation, well engineering, and field development planning work required as part of the project development process. The Petrophysics Advisor will participate in formal brainstorming workshops with other key Halliburton technical resources and research, prepare and present technical publications.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Requires an undergraduate degree in petroleum engineering or geology and a minimum of 10 years of experience in petrophysical evaluation, which includes experience in oil &amp; gas operators, service companies or consulting companies. Halliburton is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation . </p><p></p></section>

<p>Experienced ELV Engineer to join our QA/QC department, focusing on quality control for extra-low voltage (ELV) and weak current systems in high-rise tower construction project for the Main Contractor. The ideal candidate should have a strong background in site quality inspections for specialized systems, testing &amp; commissioning experience, and the ability to maintain high professionalism and execution capability under intense work and tight schedules.</p><p>Conduct quality inspections throughout all stages of ELV installation works during construction and post-completion phases. Verify site construction quality and compliance against approved drawings, schematic diagrams, and technical specifications. Identify quality deviations, installation defects, interference risks, and non-conformities; track corrective actions to closure. Supervise material receiving inspections (MIR); ensure compliance with approved material submittals and samples in terms of specification, brand, grade, and certification standards. Lead and participate in pre-commissioning inspections, system testing acceptance, and defect rectification processes. Witness and verify multi-system integration testing. Prepare and maintain punch lists for ELV systems; track the rectification status of each defect with photographic and technical records until closure. Review as-built drawings and O&amp;M manuals for completeness and accuracy; ensure compliance with delivery standards. Coordinate with sub-contractors, specialized system vendors, consultants, and the client to complete final acceptance and handover sign-off processes. Maintain the quality documentation system, including quality inspection plans, checklists, and method statements Prepare daily and weekly quality reports to inform management of quality status and critical issues Manage the material submittal log and document version control; ensure the latest drawings are used on site Coordinate multi-disciplinary interfaces at the field level, specifically managing boundaries between ELV systems, LV power supplies, and Mechanical interfaces (HVAC dampers, fire pumps, elevators, etc.) to resolve technical interface issues during installation. Attend quality coordination meetings; follow up on the timely implementation of preventive and corrective measures on site.</p><p><strong>Desired Candidate Profile</strong></p><p>Bachelor's degree or higher in Electrical Engineering, Electronics &amp; Communication Engineering, or a related discipline (or equivalent Technical Diploma with extensive experience).</p>

<p>The Site Management Officer is responsible for (Follow up) all aspects of site acquisition, lease negotiations, contract renewals, coordination of security activities. This role involves field-based tasks to ensure site accessibility, security compliance, and operational readiness while maintaining smooth relationships with site owners and resolving site-related issues. Follow up, solve and complete/achieving all tasks in the best way to implement all corporate goals and requirements in a way that reflects positively on the company. Handle site acquisition processing via internal systems (click-on-site). Prepare and upload all required site acquisition documents. Conduct pre-plan and after-plan joint surveys for new and existing sites. Negotiate lease terms and rent with new and existing site owners (private and shared sites). Explain and clarify contract terms and conditions to site owners. Obtain approvals from owners for expansion, upgrades, or co-hosting with Asia cell. . Facilitate contract renewals by renegotiating lease terms and ensuring updated agreements are documented and explained. Conduct pre-plan site surveys for new sites, fixing MBTS, and additional infrastructure. Participate in after-plan joint surveys to validate implementation. Handover sites to designated security companies. Coordinate handovers with Deployment and Emergency Response (ER) teams. Prevent and manage site outages and complaints through calls or site visits. Take corrective actions by coordinating with responsible teams post-outage. Serve on the annual trespassing committee for EC. Participate in investigation committees for theft or related incidents. Obtain access permissions through calls and coordination with site owners. Assess sites for outsourcing or insourcing during contract renewals (with or without guards).</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Diploma Or Bachelor s degree</li><li>Experience (2-4years )</li><li>Safety &amp; Compliance Awareness</li><li>Intermediate Computer skill (Word, excel, outlook &amp; Power Point)</li><li>Language skills (Arabic, English) speaking &amp; writing</li><li>Ability to Coordinate Site Operational Activities</li><li>Stakeholder &amp; Government Coordination Skills</li></ul><h3>Behavioral Competencies:</h3><ul><li>Delivering Results &amp; Fostering Ownership</li><li>Building Customer Value</li><li>Networking &amp; Influencing Collaboratively</li><li>Leading Teams</li><li>Shaping Strategy</li><li>Driving Change</li></ul><h3>Technical Competencies:</h3><ul><li>Conflict Resolution</li><li>Fuel Management</li><li>Problem Solving</li><li>Negotiation</li><li>Local Language Knowledge</li><li>Government Relations</li><li>Mechanical, Electrical &amp; Plumbing Knowle</li></ul>

<p>The Construction Manager is responsible for the complete administration and organization of construction and field personnel and directs the field effort through the activities of his staff. He reports directly to the Project Manager. Contributes to Construction Safety by reducing site exposure through modularization, standardization and maximizing off plot construction. Contributes in the development of brownfield construction strategies and planning initiatives for project opportunities pre FID. Focusses on addressing and removing hurdles to efficient construction and actively monitors productivity on site, advising (acting on behalf of) the construction manager of ways to improve the productivity metrics. Identifies and monitors brownfield construction planning initiatives for approved projects post FID. Will input into enhancing the design, contracting strategy and execution planning all in consideration of constructability through input into HSE, cost, schedule and quality. Acts as the Construction interface from the point of project inception to the point the project starts field execution. Ability to effectively work on more than one project at a time. Accountabilities/ Expectations : Coordinate with Project Engineer and EPCM Construction Management Team to bring a coordinated approach to the overall project scope, quality, cost and schedule expectations. Ensure that planning of the project deliverables from Engineering and Contracts &amp; Procurement is line with the construction sequence and further to the hand over sequence. Ensures designs make optimal use of cold work, modularization and off plots construction to minimize HSSE exposure on site.</p><p><strong>Desired Candidate Profile</strong></p><p>Skills are typically acquired through completion of an undergraduate degree in architecture, engineering, or business administration, preferred Engineering branches., i.e. Mechanical, Civil, electrical, chemical, or equivalent. 5 years of experience in project management which includes experience in facility construction or remodeling and management experience. Preferred Experience: Minimum 15 years experience in Oil and Gas related project Design and Engineering Minimum 10 years experience in Oil and Gas Project Delivery as a Umbrella Contract Construction Manager function in a discipline Workforce Experience in Productivity measurement resource based planning (Level 4 Scheduling) Strong Managerership and teambuilding skills Supervisory experience</p>