Duct Technician jobs in Iraq

<p>Should have at least eight years experience out of which four years should be Gulf Experience. No Certificate required. However, he should be able to read the shop drawings so can install duct as per drawing. Should have knowledge of different kind of Duct &amp; duct flange types. Should have hands on experience for installation of duct at heights. Should have hands on experience for operation of power tools like drill machine, grinder, pop-rivet gun etc. Should able to fabricate support as per site requirement. Should able to apply sealant, install fire damper, VCD, sound attenuator, grill fixing etc.</p><p><strong>Desired Candidate Profile</strong></p><p>Should have at least eight years experience out of which four years should be Gulf Experience.</p><p>No Certificate required. However, he should be able to read the shop drawings so can install duct as per drawing. Should have knowledge of different kind of Duct &amp; duct flange types. Should have hands on experience for installation of duct at heights. Should have hands on experience for operation of power tools like drill machine, grinder, pop-rivet gun etc. Should able to fabricate support as per site requirement. Should able to apply sealant, install fire damper, VCD, sound attenuator, grill fixing etc.</p>

<p><h4>Essential responsibilities and daily duties include:</h4> <p><strong>Provide hands-on subject matter expertise for the 30mm MK 44 and MSI-DS Seahawk Weapons Systems utilized on Iraqi Naval vessels.</strong><br> Provide hands-on training in the operation, maintenance, and repair of all 30mm MK 44 and MSI-DS Seahawk Deck Gun Systems.<br> Provide subject matter expertise on the weapon system's operation, theory, and repair.<br> Collaborate with the Amentum in-country team, port engineer, and the Iraqi Navy to provide timely and efficient technical support for the Seahawk Weapons System.<br> Serve as a technical advisor/consultant.<br> Provide deck gun systems planning and workload execution support efforts.<br> Support troubleshooting and repair of the weapons system.<br> Provide timely and comprehensive input for the monthly status report.</p> <h4>Minimum requirements</h4> <p>High school diploma or GED.<br> 5 years of experience with weapons systems, primarily small arms and deck guns maintenance and repair.<br> Working knowledge and operational experience with MSI weapons systems, components, and associated support systems.<br> Ability to work independently and in a team environment.<br> Ability to communicate verbally and in writing. Must be proficient in English.<br> Ability to travel CONUS and OCONUS.<br> Ability to obtain a country clearance and base pass authorization.<br> Note: US citizenship is required.<br> Ability to possess an active passport at least two years after arrival in Iraq.</p> <h4>Preferred qualifications</h4> <p>10 years of experience with weapons systems, primarily small arms and deck guns maintenance and repair.<br> 5 years of experience as a MK44 Gun/Weapons Technician with specific experience maintaining MSI deck gun systems.<br> In-depth knowledge (technician and SME-level) of advanced electro-optical and laser range finding gun director systems.</p></p><p></p>

<p>Lead a team of duct erectors and fabricators, ensuring adherence to safety and quality standards. Oversee the installation of ductwork, ensuring proper alignment and secure fittings. Coordinate the fabrication of duct components, ensuring they meet specifications and project timelines. Conduct inspections of completed work to ensure compliance with design specifications and industry standards. Collaborate with project managers to plan and execute ductwork installation schedules. Provide training and mentorship to team members on best practices and safety protocols.</p><p><strong>Desired Candidate Profile</strong></p><p>Proficient in reading blueprints and technical drawings. Strong problem-solving and decision-making abilities. Excellent communication and interpersonal skills.</p>

<p>O &amp; M technician for daily job orders and team follow-up Daily task O&amp;M follow-up Network performances and KPI with outage follow-up Project implementations participations Daily reporting.</p><p>Technical knowledge (Power, Generators and cooling) maintenances and repair Preventive and correction process</p><p>Behavioral Competencies: Delivering Results &amp; Fostering Ownership. Building Customer Value.</p><p>Technical Competencies: Access Network Operations Network Monitoring Passive Network Operations Problem Solving Technical Writing and Reporting</p><p><strong>Desired Candidate Profile</strong></p><p>Mechanical /Electrical perp industry / technology institute 5-year experiences in field</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Medical Laboratory Technician (MLT) is responsible to provide comprehensive health services to DOS, DOD, and contractor personnel stationed in Iraq. The MLT performs lab tests and procedures, mostly comprising of microscopic, bacteriological, hematologic, immunologic, and chemical diagnostic analyses on samples of tissue, blood, urine, stool, synovial fluid and semen. The MLT looks for clues to the absence, presence, and extent of the causes and progression of diseases through accurate and efficient lab tests. The position is on a Locum rotation, 30 days active and 120 days inactive.</p><p><b>Key Responsibilities:</b></p><ul><li>Collect and process biological specimens for laboratory testing.</li><li>Conduct routine and specialized tests in hematology, microbiology, chemistry, and blood bank.</li><li>Maintain laboratory equipment and troubleshoot any technical issues.</li><li>Adhere to safety protocols and maintain a clean laboratory environment.</li><li>Record and report test results accurately and in a timely manner.</li><li>Collaborate with pathologists and other medical staff to interpret results and ensure quality patient care.</li><li>Maintains safe and clean working environment by complying with procedures, rules, and regulations.</li><li>Actively participates in Mass Casualty exercises and events.</li><li>Completes required organizational compliance education, including assigned requirements that are client-specified, for Joint Commission Healthcare Staffing Services certification or other regulatory bodies.</li></ul><p>This list is non-exhaustive, and the role holder may be required to undertake additional duties that are not specifically listed above.</p><p><b>Additional Duties:</b></p><ul><li>Compliance with International SOS Government Medical Services, Inc. policies and procedures.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Required Skills and Knowledge:</p><ul><li>Current Certification with a nationally recognized registry such a MT (ASCP) or home country equivalent.</li><li>Must be able to read, write and speak English in order to effectively communicate.</li><li>Proficiency with Microsoft Office applications and Electronic Medical Records (EMR).</li><li>Experience on a military site working as a government subcontractor or prime contractor is preferred.</li><li>Have fluency in both oral and written English.</li></ul><p>Experience Preferred:</p><ul><li>Minimum of 3 years recent experience as Medical Laboratory Technician including 6 months within the last year.</li><li>Current American Heart Association Basic Life Support (BLS) certification preferred.</li></ul><p>Education Required:</p><ul><li>Degree in medical laboratory technology or related field scientific field with an approved laboratory training program, or home country equivalent.</li></ul><p>Physical Requirements:</p><ul><li>Sitting, standing, walking, climbing, bending/stooping, kneeling, twisting.</li><li>Visual acuity.</li><li>Minimal hearing loss.</li><li>Push/pull/carry minimum 50 lbs.</li></ul><p>Other Special Qualifications:</p><ul><li>Obtain medical clearance and maintain current immunizations.</li><li>Must be able to relocate to Balad, Iraq.</li><li>A valid passport from country of record is required and must be in your possession prior to relocation.</li><li>You must maintain a current passport during your stay in Balad.</li></ul><p></p></section>

<p><h4>Job description</h4> <p>Amentum is seeking a HVAC technician to support various naval vessels and associated life support operations and facilities. This role is part of the Naval Sea Systems Command (NAVSEA) PMS 326 Follow-On Technical Support (FOTS) contract. As the HVAC technician, you will be responsible for the installation, maintenance, repair, and testing of HVAC systems aboard various naval vessels to include 60-meter offshore support vessels (OSV), 35-meter patrol boats (PB), and 26-foot defender rigid hull inflatable boats (RHIB). You will support the maintenance and repair of HVAC equipment serving life support facilities comprised of living spaces, workspaces, recreational areas, and dining facilities.</p> <p>This is a full-time, in-country role operating on a 90/30 schedule. The work location will be at the Iraqi Naval Base in the port of Umm Qsar, Iraq. This position includes a competitive benefits package.</p> <h4>Essential responsibilities and daily duties will include:</h4> <ul> <li>Installation, repair, and maintenance of HVAC systems including air conditioning, heating units, heat pumps, compressors, and refrigeration systems.</li> <li>Inspection and test of HVAC systems and components.</li> <li>Perform regular preventive maintenance tasks to maintain system effectiveness and ensure system longevity.</li> <li>Diagnose and repair malfunctions in various HVAC systems.</li> <li>Collaborate with management and logistics staff to coordinate logistics, procurement, and inventory management activities to ensure the timely availability of parts and materials to support HVAC maintenance and repair operations.</li> <li>Maintain records of HVAC maintenance and repair work performed.</li> <li>Perform emergency repairs promptly and efficiently.</li> <li>Comply with service standards, work instructions, and customer requirements.</li> <li>Maintain, repair, or replace motors, pumps, condensers, and controls.</li> <li>Assist with customer queries and provide technical feedback and recommendations.</li> <li>Prepare records and reports detailing work performed.</li> <li>Participate in project support meetings, as required.</li> <li>Comply with all Contract Deliverable Requirement List (CRDL) requirements.</li> </ul> <h4>Minimum requirements:</h4> <ul> <li>High school diploma or GED equivalent.</li> <li>6 years of progressive experience is required in the servicing of ship or submarine systems including the planning of field services.</li> <li>4 years of experience is required to have been obtained servicing HVAC equipment aboard ships or submarines.</li> <li>Ability to work independently and in a team environment.</li> <li>Ability to communicate verbally and in writing. Must be proficient in English.</li> <li>Ability to travel CONUS and OCONUS.</li> <li>Ability to obtain a country clearance and base pass authorization. Note: US citizenship is required.</li> <li>Ability to possess an active passport at least two years after arrival in Iraq.</li> </ul> <h4>Preferred qualifications:</h4> <ul> <li>Foreign Military Sales (FMS) experience.</li> <li>United States Navy (USN) experience in the servicing of ship or submarine systems.</li> </ul></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Radiology Technician uses specialized X-ray equipment to create images of the body for doctors to diagnose and treat patients. The position is on a Locum rotation, 30 days active and 120 days inactive.</p><p>Key Responsibilities:</p><ul><li>Prepares patients, operates equipment and evaluates X-ray images.</li><li>Documents patient care services by charting in patient and department records.</li><li>Prepares patients for radiological procedure by positioning patient.</li><li>Adjusts immobilization devices, moves equipment into specified positions and modifies equipment controls to set exposure factors.</li><li>Providing explanations of treatment and answering questions for patients.</li><li>Minimizes radiation to patient and staff by practicing radiation protection techniques, using beam restrictive devices, patient shielding and knowledge of exposure factors.</li><li>Adjusts and maintains imaging equipment and ensures it is working properly.</li><li>Protects patients and employees by adhering to infection-control policies and protocols.</li><li>Maintains safe and clean working environment by complying with procedures, rules, and regulations.</li><li>Actively participates in Mass Casualty exercises and events.</li><li>Performance of other duties as assigned.</li></ul><p>Operational responsibilities:</p><ul><li>Assess patient and uses proper patient positioning to obtain optimal images.</li><li>Evaluates previous studies for comparison.</li><li>Performs technical phases of radiographic procedures within the radiology department</li><li>Documents findings in a technologist report.</li><li>Performs procedures while taking precautions against unsafe exposure to patient, self or others.</li><li>Develops digital images, creates, updates and maintains patient data files and ensures transmission of images to consultant radiologists.</li><li>Manages diagnostic evaluation reports.</li><li>Provides written and verbal reports to physicians recognizing cases requiring immediate attention.</li><li>Interfaces with consultant radiologists and manages the operational and fiduciary compliance.</li><li>Interfaces with clinic staff, technical support for regular software upgrades, maintenance and troubleshooting.</li><li>Responsible for imaging patient records, creates and maintains files and preforms audits.</li></ul><p>This list is non-exhaustive, and the role holder may be required to undertake additional duties that are not specifically listed above.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Capable of functioning independently and proven ability in exercising independent judgment.</li><li>Consultation skills, excellent verbal and written communication abilities, public speaking skills, and proficiency with computer system.</li><li>Must be familiar with all standard radiographic procedures.</li><li>Possesses technical ability to obtain optimal images.</li><li>Have fluency in both oral and written English.</li><li>Current experience in direct patient care and must have worked a minimum of 6-months of the last 12-months in career field.</li><li>Maintain continuing education activities.</li><li>Experience with digital acquisition and transmission of images desired.</li><li>Must be certified by the American Registry of Radiologic Technologists (ARRT) or home country equivalent.</li><li>Certified Ultrasound Technician or home country equivalent preferred.</li><li>Must meet pre-deployment physical requirements.</li><li>Work involves sitting and standing for prolonged periods of time.</li><li>May require bending, stooping and lifting to 25 lbs.</li><li>Obtain medical clearance and maintain current immunizations.</li><li>Must be able to relocate to Balad, Iraq.</li><li>A valid passport from country of record is required and must be in your possession prior to relocation.</li><li>You must maintain a current passport during your stay in Balad.</li><li>The incumbent may be required to perform job related tasks other than those specifically presented in this job description.</li><li>This job description is subject to regular review.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Radiology Technician uses specialized X-ray equipment to create images of the body for doctors to diagnose and treat patients. The position is on a Locum rotation, 30 days active and 120 days inactive.</p><p>Key Responsibilities:</p><ul><li>Prepares patients, operates equipment and evaluates X-ray images.</li><li>Documents patient care services by charting in patient and department records.</li><li>Prepares patients for radiological procedure by positioning patient.</li><li>Adjusts immobilization devices, moves equipment into specified positions and modifies equipment controls to set exposure factors.</li><li>Providing explanations of treatment and answering questions for patients.</li><li>Minimizes radiation to patient and staff by practicing radiation protection techniques, using beam restrictive devices, patient shielding and knowledge of exposure factors.</li><li>Adjusts and maintains imaging equipment and ensures it is working properly.</li><li>Protects patients and employees by adhering to infection-control policies and protocols.</li><li>Maintains safe and clean working environment by complying with procedures, rules, and regulations.</li><li>Actively participates in Mass Casualty exercises and events.</li><li>Performance of other duties as assigned.</li></ul><p>Operational responsibilities:</p><ul><li>Assess patient and uses proper patient positioning to obtain optimal images.</li><li>Evaluates previous studies for comparison.</li><li>Performs technical phases of radiographic procedures within the radiology department</li><li>Documents findings in a technologist report.</li><li>Performs procedures while taking precautions against unsafe exposure to patient, self or others.</li><li>Develops digital images, creates, updates and maintains patient data files and ensures transmission of images to consultant radiologists.</li><li>Manages diagnostic evaluation reports.</li><li>Provides written and verbal reports to physicians recognizing cases requiring immediate attention.</li><li>Interfaces with consultant radiologists and manages the operational and fiduciary compliance.</li><li>Interfaces with clinic staff, technical support for regular software upgrades, maintenance and troubleshooting.</li><li>Responsible for imaging patient records, creates and maintains files and preforms audits.</li></ul><p>This list is non-exhaustive, and the role holder may be required to undertake additional duties that are not specifically listed above.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Required Skills and Knowledge:</p><ul><li>Capable of functioning independently and proven ability in exercising independent judgment.</li><li>Consultation skills, excellent verbal and written communication abilities, public speaking skills, and proficiency with computer system.</li><li>Must be familiar with all standard radiographic procedures.</li><li>Possesses technical ability to obtain optimal images.</li><li>Have fluency in both oral and written English.</li></ul><p>Experience Required:</p><ul><li>Current experience in direct patient care and must have worked a minimum of 6-months of the last 12-months in career field.</li><li>Maintain continuing education activities.</li><li>Experience with digital acquisition and transmission of images desired.</li></ul><p>Education Required:</p><ul><li>Must be certified by the American Registry of Radiologic Technologists (ARRT) or home country equivalent.</li><li>Certified Ultrasound Technician or home country equivalent preferred.</li></ul><p>Physical Requirements:</p><ul><li>Must meet pre-deployment physical requirements.</li><li>Work involves sitting and standing for prolonged periods of time.</li><li>May require bending, stooping and lifting to 25 lbs.</li></ul><p>Other Special Qualifications:</p><ul><li>Obtain medical clearance and maintain current immunizations.</li><li>Must be able to relocate to Balad, Iraq.</li><li>A valid passport from country of record is required and must be in your possession prior to relocation.</li><li>You must maintain a current passport during your stay in Balad.</li><li>The incumbent may be required to perform job related tasks other than those specifically presented in this job description.</li><li>This job description is subject to regular review.</li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span> </span><p><strong><span>GARDAWORLD CONTRACTOR ROLE SPECIFICATION</span></strong></p><br> <br> <p><strong><span>Position&nbsp;&nbsp;</span></strong></p><br> <p><strong><span>Communications Technician</span></strong></p><br> <br> <p><strong><span>Role Type</span></strong></p><br> <p><strong><span>Contractor, GW Consulting Middle East Limited</span></strong></p><br> <br> <p><strong><span>Project</span></strong></p><br> <p><strong><span>FCDO Baghdad</span></strong></p><br> <br> <p><strong><span>Client</span></strong></p><br> <p><strong><span>Foreign, Commonwealth and Development Office (FCDO)</span></strong></p><br> <br> <p><strong><span>Location &nbsp;&nbsp; &nbsp;</span></strong></p><br> <p><strong><span>Baghdad, Iraq</span></strong></p><br> <br> <p><strong><span>Est. Start Date</span></strong></p><br> <p><strong><span>TBC (subject to further confirmation/successful onboarding/visa processing)</span></strong></p><br> <br> <p><strong><span>Duration of Task</span></strong></p><br> <p><strong><span>Open ended</span></strong></p><br> <br> <p><strong><span>Duty Rotation</span></strong></p><br> <p><span>6 weeks on, 6 weeks off, subject to operational requirements.</span></p><br> <br> <p><strong><span>Travel Pay</span></strong></p><br> <p><span>Contractors are not entitled to pay while travelling. The first day of pay is the day of arrival in the country of operations. The last day of pay is the day of departure from the country of operations. Regardless of the time of arrival and departure, contractors are entitled to half of the daily on duty rate on the day of their arrival in and departure from the country of operations.</span></p><br> <br> <p><strong><span>Visa Requirements</span></strong></p><br> <p><span>The Company shall be responsible and liable for the multi-entry visa cost as required in order to deliver the Services. Any visa costs incurred by the Contractor shall be reimbursed.</span></p><br> <br> <p><strong><span>Package</span></strong></p><br> <p><span>GardaWorld will provide the Independent Contractor with appropriate accommodation, insurance, flights and life support while on duty.</span></p><br> <p><strong><span>Food, Accommodation and General Expenses:</span></strong></p><br> <p><span>Company will provide the Contractor with food, drink, transportation and accommodation as necessary whilst the Contractor is engaged in a project.</span></p><br> <p><span>If Company is unable to provide the Contractor with food, accommodation and transportation, except as set forth below for inbound and outbound travel to the project location,&nbsp;Company shall either provide a per diem at an agreed rate or&nbsp;reimburse to the Contractor for any travelling, hotel and other expenses reasonably incurred by him in the proper performance of his duties under this Agreement. In the case of the latter, the Contractor must provide Company with such vouchers and receipts or other evidence of actual payment of such expenses as Company may reasonably require. The Contractor shall seek the prior approval by Company for any individual expenses incurred under this Agreement.</span></p><br> <br> <p><strong><span>Flight Package</span></strong></p><br> <p><span>GardaWorld will provide an economy class return ticket per rotation to the project location from a hub airport as close as reasonably practicable to the Contractor’s declared home address.</span></p><br> <p><span>The Contractor will be asked to declare their preferences for a primary, secondary and tertiary hub airport from the GardaWorld hub list at the commencement of their engagement. Where possible and commercially acceptable, GardaWorld will look to book travel to and from one of the preferred hubs.</span></p><br> <p><span>The Contractor will be responsible for any travel arrangements between the hub airport and their home address.&nbsp; The Company will pay for any transfers from the airport near the project location or such other intermediate landing location to the Consultant’s accommodations at the project.</span></p><br> <p><span>Further information can be found in the GardaWorld Contractor Travel Standard Operating Instruction (SOI), copy will be provided upon acceptance.</span></p><br> <br> <p><strong><span>Role Requirements</span></strong></p><br> <p><strong><span>Essential Requirements:</span></strong></p><br> <ul> <li><span>Proven and demonstrable experience of commercial communications systems; HF/VHF/UHF radio, Satellite telephone systems, as well as ECM, IT, RF Safety.</span></li> <li><span>Fluent written and spoken English</span></li> <li><span>BTEC National Certificate in Telecommunications – Electrical/Electronic Engineering; Or</span></li> <li><span>Former military Telecommunications Technician/Operator with minimum 3 years’ experience.</span></li> </ul> <p><strong><span>Desirable:</span></strong></p><br> <ul> <li><span>Ex-Military with a minimum of 2 years’ experience of static operations rooms and commercial communications equipment.</span></li> <li><span>Ability to clearly communicate technical concepts and information to non-technical personnel.</span></li> <li><span>Demonstrable knowledge of relevant communications standards or best practice e.g. Vehicle installations, antenna and feeder types and uses along with installation practice, current regulations regarding equipment types and future developments.</span></li> </ul> <p><strong><span>Additional Qualities</span></strong></p><br> <ul> <li><span>Team member</span></li> <li><span>Able to work unsupervised for long periods</span></li> <li><span>Good communication skills</span></li> <li></li></ul> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>GARDAWORLD CONTRACTOR ROLE SPECIFICATION Position Communications Technician Role Type Contractor, GW Consulting Middle East Limited Project FCDO Baghdad Client Foreign, Commonwealth and Development Office (FCDO) Location Baghdad, Iraq Est. Start Date TBC (subject to further confirmation/successful onboarding/visa processing) Duration of Task Open ended Duty Rotation 6 weeks on, 6 weeks off, subject to operational requirements. Travel Pay Contractors are not entitled to pay while travelling. The first day of pay is the day of arrival in the country of operations. The last day of pay is the day of departure from the country of operations. Regardless of the time of arrival and departure, contractors are entitled to half of the daily on duty rate on the day of their arrival in and departure from the country of operations. Visa Requirements The Company shall be responsible and liable for the multi-entry visa cost as required in order to deliver the Services. Any visa costs incurred by the Contractor shall be reimbursed. Package GardaWorld will provide the Independent Contractor with appropriate accommodation, insurance, flights and life support while on duty. Food, Accommodation and General Expenses: Company will provide the Contractor with food, drink, transportation and accommodation as necessary whilst the Contractor is engaged in a project. If Company is unable to provide the Contractor with food, accommodation and transportation, except as set forth below for inbound and outbound travel to the project location, Company shall either provide a per diem at an agreed rate or reimburse to the Contractor for any travelling, hotel and other expenses reasonably incurred by him in the proper performance of his duties under this Agreement. In the case of the latter, the Contractor must provide Company with such vouchers and receipts or other evidence of actual payment of such expenses as Company may reasonably require. The Contractor shall seek the prior approval by Company for any individual expenses incurred under this Agreement. Flight Package GardaWorld will provide an economy class return ticket per rotation to the project location from a hub airport as close as reasonably practicable to the Contractor s declared home address. The Contractor will be asked to declare their preferences for a primary, secondary and tertiary hub airport from the GardaWorld hub list at the commencement of their engagement. Where possible and commercially acceptable, GardaWorld will look to book travel to and from one of the preferred hubs. The Contractor will be responsible for any travel arrangements between the hub airport and their home address. The Company will pay for any transfers from the airport near the project location or such other intermediate landing location to the Consultant s accommodations at the project. Further information can be found in the GardaWorld Contractor Travel Standard Operating Instruction (SOI), copy will be provided upon acceptance.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Proven and demonstrable experience of commercial communications systems; HF/VHF/UHF radio, Satellite telephone systems, as well as ECM, IT, RF Safety.</li><li>Fluent written and spoken English</li><li>BTEC National Certificate in Telecommunications Electrical/Electronic Engineering; Or</li><li>Former military Telecommunications Technician/Operator with minimum 3 years experience.</li></ul><h4>Desirable:</h4><ul><li>Ex-Military with a minimum of 2 years experience of static operations rooms and commercial communications equipment.</li><li>Ability to clearly communicate technical concepts and information to non-technical personnel.</li><li>Demonstrable knowledge of relevant communications standards or best practice e.g. Vehicle installations, antenna and feeder types and uses along with installation practice, current regulations regarding equipment types and future developments.</li></ul><h4>Additional Qualities</h4><ul><li>Team member</li><li>Able to work unsupervised for long periods</li><li>Good communication skills</li><li>Pro-active and keeping abreast of future technical innovations.</li><li>Ability to work in arduous conditions</li><li>*All candidates will need to be screened to SC level or eligible for screening so only British &amp; Commonwealth passport holders can apply.</li><li>Proviso: You must have been resident in the UK for at least two of the previous 10 years immediately prior to your application, at least one year of which must have been a consecutive twelve month period unless you have served overseas with HM Forces or in some other official capacity as a representative of Her Majesty s Government, or have lived overseas as a result of your parents or partner s Government employment.</li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Full Time <b>Massage Therapist</b> for a Day Spa in Iraq . <p> You must be permitted to work in this country.<br> Minimum experience required: over 2 years. <br>Salary: Negotiable based skills and experience <br>Location: Basra <br>Essential Qualifications: Degree <br>Start date: Immediately <br>Details:<br></p><br>Job Opportunity: VIP Spa &amp; Beauty Salon Professionals Needed A luxury, high-end VIP Ladies Salon ... Show More<br>Job Opportunity: VIP Spa &amp; Beauty Salon Professionals Needed<br> <br> A luxury, high-end VIP Ladies Salon &amp; Spa in Iraq is currently hiring top-tier professionals directly from The Philippines and Thailand for the following positions:<br> <br> 1. Female Physical Therapist / Massage Specialist (With professional degree/certification)<br> 2. Female Nail Technician (Specialized in Extensions, Nail Art, and Gel)<br> <br> Requirements:<br> * Minimum 3–5 years of experience in luxury spas, salons, or 5-star hotels.<br> * Good communication skills in English.<br> * Professional appearance and high hygiene standards.<br> <br> We Offer:<br> * Attractive tax-free salary + performance commissions.<br> * Free high-standard accommodation, transportation, and medical insurance.<br> * Free employment visa and round-trip flight ticket.<br> <br> How to Apply:<br> Please send your updated CV, a professional photo, and a short video (1-2 minutes) showcasing your work/technique via:<br> * WhatsApp: 009647822121385<br> * Email: <a href="/cdn-cgi/l/email-protection" class="__cf_email__" data-cfemail="4928273e3b33337870707d092e24282025672a2624">[email&nbsp;protected]</a><br> Show Less<br> <br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Provide network maintenance services . Carry out maintenance (Replace Antenna, RRU, Jumper, Optical, SFP). Carry out preventive &amp; corrective maintenance (Visit BSC, Node, site to clear fans and cables systemize) Health check &amp; Clear Alarms (critical, Major, Minor). Make site acceptance tests to be done before going on-air. Install/dismantle the HW of MW &amp; RAN network component including sub-racks, antennas, radios &amp; all related cables not limited to IF, RF &amp; wave guide cables. Install, test &amp; Maintain twisted pair cable, Fiber optic, coax data &amp; lan cabling systems using the related test. Support network design activities in the filed such as line of Sight LOS, alignment, Rack/Subrack Expansion, Tower space, equipment inventories &amp; generating a professional reporting for the survey result. Perform troubleshooting to network failures &amp; identify bottlenecks to ensure long term efficiency of network. Perform emergency &amp; routine field servicing of the transportation network including MW, Fiber Optic &amp; Datacom devices &amp; RAN cabinet. Assist &amp; coordinate with related department technician to joint deployment, troubleshooting, and repair of network E2E segments. Create &amp; implement daily work schedule &amp; performs other related jobs duties as assigned. Carry out materials inventory maintenance support including stock counts, logistics support from WH/office to sites &amp; sites to WH/office. Materials include equipment, accessories, consumables &amp; tools.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Secondary or High school.</li><li>2 years work experience.</li><li>Behavioral Competencies: Delivering Results &amp; Fostering Ownership. Building Customer Value .</li><li>Technical Competencies: Access Network Operations. Problem Solving. Service Operations Center (SOC). Technical Writing and Reporting. Troubleshooting &amp; Technical Problem Solving.</li></ul><p></p></section>

<p>The Instrumentation &amp; Controls Technician disassembles, inspects, cleans, repairs, calibrates, tests, and performs periodic maintenance of field instruments, equipment systems and controls. Evaluates and determines necessary modification, performs complex repairs or removal of instruments or devices needing overhaul during scheduled maintenance, troubleshooting while performing unscheduled work.</p><p><strong>Essential Duties &amp; Responsibilities:</strong></p><ul><li>Record and report abnormal function or out of tolerance conditions of equipment and initiate corrective action and documentation</li><li>Provide documents daily record of inspection, maintenance activity, repair and other work performed within approved guidelines and procedures.</li><li>Reinstall, test, evaluate, calibrate, and maintain instruments or devices upon completion of repairs.</li><li>Communicate with customer staff in the calibration, repair and operation of equipment as necessary.</li><li>Perform work in accordance with approved equipment, calibration, maintenance and safety procedures.</li><li>Ability and willingness to work holidays, weekends and overtime as required by field assignments</li><li>Travel extensively (internationally and domestically)</li><li>May be assigned other duties to help proactively drive our FieldCore vision and align with our organization s core values.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Two-year degree, scientific field of study preferred or equivalent related work experience</p><p>Must have appropriate license or certification where required by federal, state or local laws</p><p>English proficiency required</p><p><strong>Desired Characteristics:</strong></p><ul><li>Introductory level.</li><li>Possess good attitude, skills, and ambition</li><li>Basic skills training to ensure knowledge of fundamental concepts, practices and procedures of a particular field of specialization.</li><li>Experience in instrumentation, controls, installing, calibrating, maintaining and repairing equipment or equivalent experience.</li><li>Demonstrated use and understanding of physical standards of mass, temperature flow and pressure.</li><li>Working knowledge of computers.</li><li>Ability to read and work from blueprints, schematic diagrams and specification manuals.</li><li>Team player committed to working in a quality environment</li><li>Working knowledge of computers/PLC's</li><li>Excellent customer, communication, and interpersonal skills</li><li>Ability to work independently</li><li>Ability to complete multiple projects within time constraints</li><li>Strong organizational skills</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Computer Systems Analyst I provide several phases of the required systems analysis where the nature of the system is predetermined, uses established fact-finding approaches, knowledge of pertinent work processes and procedures, and familiarity with related computer programming practices, system software, and computer equipment.</p><p>This Analyst provides several phases of the required systems analysis where the nature of the system is predetermined, uses established fact-finding approaches, knowledge of pertinent work processes and procedures, and familiarity with related computer programming practices, system software, and computer equipment.</p><p>Carries out fact finding, and analyses as assigned, usually of a single activity or a routine problem, and applies established procedures where the nature of the system, feasibility, computer equipment and programming language have already been decided.</p><p>May assist a higher-level systems analyst by preparing the detailed specifications required by computer programmers from information developed by the higher-level analyst.</p><p>May research routine user problems and solve them by modifying the existing system when the solutions follow clear precedents.</p><p>Prepare cost and deadline estimates as required for review.</p><p>Works independently to adapt guides to specific situations; resolve problems and deviations according to established practices; and obtain advice where precedents are unclear or not available.</p><p>Carries out objectives, priorities and deadlines as defined by the supervisor.</p><p>May supervise technician and others who assist in specific assignments.</p><p>Will have some variation within and across contracts and may list additional or specific job duties related to assigned function/level which are not aforementioned.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>High School Diploma or Equivalent is required. Certification of education level is required.</li><li>CompTIA Security+ Certification.</li><li>Must possess Two (2) years of related experience in computer systems analysis.</li><li>Ability to obtain and maintain a US Government SECRET Clearance is required. (Prefer active Secret clearance). US Citizenship is required for SECRET clearance at this work location.</li><li>A valid U.S. Passport is required to travel internationally. Passport must have a minimum of 6 blank pages and 2 plus year validity on expiration date of passport.</li><li>Must be able to pass CENTCOM medical requirements for deployment.</li><li>Must be able to obtain a visa in CENTCOM locations.</li></ul><p>Requires competence in most phases of system analysis.</p><p>Systems analysis and design skills in an area such as a record keeping or scientific operation.</p><p>Knowledge of pertinent system software and computer equipment.</p><p>Knowledge of work processes, applicable regulations, and practices of the assigned subject-matter area.</p><p>Ability to recognize probable interactions of related computer systems and predict impact of a change in assigned system.</p><p>Good problem-solving skills.</p><p>Self-motivated and the ability to work independently.</p><p>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</p><p>Must be able to lift/push/pull minimum of 50 pounds.</p><p>May work in maintenance shop or outside.</p><p>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</p><p>May be exposed to extreme noise from operating equipment.</p><p>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</p><p>May be expected to work in austere environments and all weather conditions.</p><p></p></section>

<p>As a CT/X-ray Radiographer (Radiologic Technician), also known as a Radiologic Technologist, you'll perform diagnostic X-ray and computed tomography examinations within an international healthcare environment in Baghdad, Iraq. You'll prepare and position patients, operate imaging equipment, maintain accurate clinical records, and apply radiation protection and infection-control practices throughout each examination.</p><p>Assignment Location: This position is based onsite in Baghdad, Iraq.</p><p>Key Responsibilities</p><ul><li>Perform ordered diagnostic X-ray and CT examinations.</li><li>Prepare and position patients, adjust immobilization devices, and configure imaging equipment and exposure controls.</li><li>Explain imaging procedures, answer patient questions, and document services in patient and departmental records.</li><li>Apply radiation protection techniques, including beam restriction, patient shielding, and appropriate exposure-factor selection.</li><li>Follow infection-control, workplace safety, contrast-reaction, first-aid, and emergency response protocols.</li><li>Participate in required mass-casualty exercises and organizational compliance education.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Completion of an approved radiologic technology program leading to a diploma, certificate, or associate degree; qualifying U.S. military radiology technical-school training; or applicable country-of-record equivalent.</li><li>At least three years of recent experience as a Radiologic Technologist, including at least six months within the past year.</li><li>Current unrestricted professional license and ARRT certification, or applicable country-of-record equivalent.</li><li>Current ARRT CT certification/registration, or applicable country-of-record equivalent.</li><li>Current BLS certification or approved equivalent.</li><li>Proficiency with electronic medical records and Microsoft Office applications.</li><li>Ability to read, write, and speak English effectively.</li><li>Valid passport from your country of record with at least 18 months remaining before expiration; ability to maintain a current passport while in Iraq; ability to obtain and maintain the required security clearance; and ability to relocate to Iraq for the duration of the project.</li><li>Ability to meet pre-assignment physical requirements and perform work involving prolonged sitting and standing, bending, stooping, and lifting up to 25 pounds.</li><li>Preferred Prior experience supporting military, government, or international healthcare environments.</li><li>Current applicable security clearance.</li></ul>

<p>The Instrumentation &amp; Controls Technician, having completed level two competencies, disassembles, inspects, cleans, repairs, calibrates, tests, and performs periodic maintenance of field instruments, equipment systems and controls. Evaluates and determines necessary modification, performs complex repairs or removal of instruments or devices needing overhaul during scheduled maintenance, troubleshooting while performing unscheduled work.</p><p><strong>Essential Duties &amp; Responsibilities:</strong></p><ul><li>Record and report abnormal function or out of tolerance conditions of equipment and initiate corrective action and documentation</li><li>Provide documents daily record of inspection, maintenance activity, repair and other work performed within approved guidelines and procedures.</li><li>Reinstall, test, evaluate, calibrate, and maintain instruments or devices upon completion of repairs.</li><li>Communicate with customer staff in the calibration, repair and operation of equipment as necessary.</li><li>Perform work in accordance with approved equipment, calibration, maintenance and safety procedures.</li><li>Ability and willingness to work holidays, weekends and overtime as required by field assignments</li><li>Travel extensively (internationally and domestically)</li><li>May be assigned other duties to help proactively drive our FieldCore vision and align with our organization s core values.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Two-year degree, scientific field of study preferred or equivalent related work experience. Basic English language skills are required. 1-3 years of experience in instrumentation, controls, installing, calibrating, maintaining and repairing equipment or equivalent experience. Must have appropriate license or certification where required by federal, state or local laws English proficiency required</p><p><strong>Desired Characteristics:</strong></p><ul><li>Qualified level. Able to successfully perform all requirements of the job properly.</li><li>Possess advanced skills and applies the fundamental concepts, practices and procedures of a particular field of specialization.</li><li>Demonstrated use and understanding of physical standards of mass, temperature flow and pressure.</li><li>Working knowledge of computers.</li><li>Ability to read and work from blueprints, schematic diagrams and specification manuals.</li><li>Team player committed to working in a quality environment</li><li>Working knowledge of computers/PLC's</li><li>Excellent customer, communication, and interpersonal skills</li><li>Ability to work independently</li><li>Ability to complete multiple projects within time constraints</li><li>Strong organizational skills</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>EPP III, Generator (3 - 150KW) and HVAC Technician SWA (Bahrain, UAE, Saudia Arabia, Kuwait, Jordan, Iraq)Perform troubleshooting, diagnostics, maintenance, and services on all types of military and commercial generators and HVAC systems used by the U.S. Army to include the 150kW EPP III generators.MEANINGFUL WORK AND PERSONAL IMPACTAs a Generator and HVAC Mechanic, the work you ll do at GDIT will be impactful to the mission of the Worldwide Field Support contract for the U.S. Army. You ll play a crucial role in providing on-site technical and maintenance assistance, analyzing complex technical problems, and providing training to site operations and maintenance personnel. Perform maintenance and sustainment support on 3kW to 150kW, 500 0hz generators involving installation and removal of generators from fixed and mobile locations, troubleshoots and repair alternating current (AC) systems, direct current (DC) systems, electronic control systems and other program logic controls, electrical wiring and accessories.Perform overhaul, maintenance and sustainment support on 3kW to 150kW, 500 0hz generators involving installation and removal of generators from fixed and mobile locations, troubleshoots and repair alternating current (AC) systems, direct current (DC) systems, electronic control systems and other program logic controls, electrical wiring and accessories. Troubleshoot and repair HVAC, Chillers, and Environmental Control Units some are standalone units and others are mounted on trailers and vehicles. Maintain all types of commercial power generation equipment; military spec generators and Uninterrupted Power Systems (UPS). Operate a Load bank during testing Fabricate wire harnesses and solder terminals. Some work will be in a generator shop environment, and some work will be in a field environment. Other duties as assigned.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>High School diploma</li><li>Extensive diesel generator experience.</li><li>Knowledge of generator parallel systems and switch gear.</li><li>Experience with brazing copper tubing and evacuating and recharging refrigerant.</li><li>Able to obtain and maintain a Secret Clearance.</li><li>US passport must not expire for at least 2 years, valid US driver s license, and an international driver s permit (AAA).</li><li>Ability to pass CRC to deploy.</li></ul><p></p></section>

<p><h4>Essential responsibilities:</h4> <p>The designee shall be qualified to maintain, modify, and repair electrical power generating and control systems, automatic transfer switches, heating, ventilation, air conditioning and refrigeration (HVAC) systems, and associated equipment. Performs scheduled periodic maintenance on systems and components, and adjusts systems to maintain proper voltage, refrigerant levels, current, frequency, and synchronization. Identifies, repairs, and records malfunctions by removing, repairing, and/or replacing defective components.</p> <p>The designee shall maintain systems such as, but not limited to, Cummins generator series DGDK, DSGAB, DGBB, C15D6, C35D6, 125D6D, MEPP series 1050, 1070A, PP-3106A and utilize Cummins InPower software for diagnostics. This designee shall be qualified to work from blueprints, drawings, and operate a variety of electrician’s hand tools and testing instruments.</p> <p>Support various generator/HVAC systems identified in Table 4.5.1 – C2 Systems and Associated Support Equipment; Table 4.5.2 ATCALS Systems and Associated Support Equipment; Table 4.5.3 ATC Weather Systems and Associated Support Equipment; Table 4.5.4 C2 Air Control Squadron O&M Support; Table 4.5.5 Regional Maintenance Center O&M and Support Equipment. Units range from 15 kW to 250 kW power generation and 1 - 5 ton HVAC split and rooftop configurations.</p> <h4>Minimum position knowledge, skills, and abilities required:</h4> <ul> <li>Universal 608 HVAC certification.</li> <li>High school diploma or GED. Formal training on power generating equipment and associated equipment such as military technical training school, vocational college, and/or a four (4) year apprentice program with experience in electrical power production maintenance and repair.</li> <li>Willingness to perform other duties outside the HVAC trade.</li> <li>Computer knowledge to navigate online training, time keeping, and email.</li> <li>Four (4) years of practical experience with equipment the technician will maintain. Six (6) months of Cummins Commercial, Advanced Medium Mobile Power Source (AMMPS) and InPower Software experience required.</li> <li>Ability to lift up to 50 lbs.</li> <li>Ability to do the following for sustained periods of time: stoop, bend, kneel, carry, reach, lift.</li> <li>Ability to work in a fast-paced, constantly changing environment.</li> <li>Ability to obtain and maintain a US CENTCOM Medical Exam.</li> <li>Must be able to obtain and maintain a Secret Security Clearance. Note: US citizenship is required to obtain a Secret Clearance.</li> </ul></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The designee shall be qualified to maintain, modify, and repair electrical power generating and control systems, automatic transfer switches, heating, ventilation, air conditioning and refrigeration (HVAC) systems, and associated equipment. Performs scheduled periodic maintenance on systems and components, and adjusts systems to maintain proper voltage, refrigerant levels, current, frequency, and synchronization. Identifies, repairs, and records malfunctions by removing, repairing, and or replacing defective components. The designee shall maintain systems such as, but not limited to Cummins generator series' DGDK, DSGAB, DGBB, C15D6, C35D6 125D6D, MEPP series 1050, 1070A, PP- 3106A and utilize Cummins Inpower software for diagnostics. This designee shall be qualified to work from blueprints, drawings, and operating a variety of electrician s hand tools and testing instruments. Support various generator/HVAC systems identified in Table 4.5.1 C2 Systems and Associated Support Equipment; Table 4.5.2 ATCALS Systems and Associated Support Equipment; Table 4.5.3 ATC Weather Systems and Associated Support equipment; Table 4.5.4 C2 Air Control Squadron O&amp;M Support, Table 4.5.5 Regional Maintenance Center O&amp;M and Support Equipment. Units range from 15kW to 250kW power generation and 1 - 5 ton HVAC split and roof top configurations.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Universal 608 HVAC certification.</li><li>High School diploma or GED.</li><li>Formal training on power generating equipment and associated equipment such as: military technical training school, vocational college, and/or a four (4) year apprentice program with experience in electrical power production maintenance and repair.</li><li>Willingness to perform other duties outside the HVAC trade.</li><li>Computer knowledge to navigate online training, time keeping and email.</li><li>Four (4) years of practical experience with equipment the technician will maintain.</li><li>Six (6) months of Cummins Commercial, Advanced Medium Mobile Power Source (AMMPS) and InPower Software experience required.</li><li>Ability to lift of up 50 lbs.</li><li>Ability to do the following for sustained periods of time: stoop, bend, kneel, carry, reach, lift.</li><li>Ability to work in a fast paced, constantly changing environment</li><li>Ability to obtain and maintain a US CENTCOM Medical Exam</li><li>Must be able to obtain/maintain a Secret Security Clearance.</li><li>NOTE: US Citizenship is required to obtain a Secret Clearance.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>EPP III, Generator (3 - 150KW) and HVAC Technician SWA (Bahrain, UAE, Saudia Arabia, Kuwait, Jordan, Iraq) Perform troubleshooting, diagnostics, maintenance, and services on all types of military and commercial generators and HVAC systems used by the U.S. Army to include the 150kW EPP III generators. MEANINGFUL WORK AND PERSONAL IMPACT As a Generator and HVAC Mechanic, the work you ll do at GDIT will be impactful to the mission of the Worldwide Field Support contract for the U.S. Army. You ll play a crucial role in providing on-site technical and maintenance assistance, analyzing complex technical problems, and providing training to site operations and maintenance personnel. Perform maintenance and sustainment support on 3kW to 150kW, 500 0hz generators involving installation and removal of generators from fixed and mobile locations, troubleshoots and repair alternating current (AC) systems, direct current (DC) systems, electronic control systems and other program logic controls, electrical wiring and accessories. Perform overhaul, maintenance and sustainment support on 3kW to 150kW, 500 0hz generators involving installation and removal of generators from fixed and mobile locations, troubleshoots and repair alternating current (AC) systems, direct current (DC) systems, electronic control systems and other program logic controls, electrical wiring and accessories. Troubleshoot and repair HVAC, Chillers, and Environmental Control Units some are standalone units and others are mounted on trailers and vehicles. Maintain all types of commercial power generation equipment; military spec generators and Uninterrupted Power Systems (UPS). Operate a Load bank during testing Fabricate wire harnesses and solder terminals. Some work will be in a generator shop environment, and some work will be in a field environment. Other duties as assigned.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bring your Generator and HVAC expertise along with a drive for innovation to GDIT. The Generator and HVAC Mechanic must have: Education: High School diploma Experience: BA/BS plus 2 years experience, AA/AS/plus 4 years experience, or a High School diploma and 7 years experience Technical skills: Extensive diesel generator experience. Knowledge of generator parallel systems and switch gear. Experience with brazing copper tubing and evacuating and recharging refrigerant. Security Clearance: Able to obtain and maintain a Secret Clearance. Travel to Bahrain, UAE, Saudia Arabia, Kuwait, Jordan, Iraq Role requirements: US passport must not expire for at least 2 years, valid US driver s license, and an international driver s permit (AAA). Ability to pass CRC to deploy.</p><p></p></section>