Electrical Drafts Man Jobs in Iraq in Iraq 2026

5 - 10 Years Naukri Gulf

Mechanical Installation Lead Hand

On-site - Iraq - Iraq 17 August 2026

Engineering

To install, assemble, align, and complete Gas Turbines, Steam Turbines, generators, and auxiliary mechanical equipment safely and accurately. To ensure all installation and alignment work meets OEM specifications, project quality standards, and HSE requirements. To support mechanical completion, inspection, commissioning, and punch-list clearance activities.Install and assemble Gas Turbines, Steam Turbines, generators, and auxiliary equipment. Perform precision alignment of rotating equipment using laser alignment and conventional methods. Install bearings, couplings, seals, diaphragms, casings, valves, and piping connections. Carry out dimensional checks, equipment elevation, centerline, and tolerance verification as per OEM requirements. Assist with turbine casing assembly, rotor installation, rotor coupling, and turning gear installation. Perform flange assembly and controlled bolting/hydraulic torqueing. Conduct inspection, flushing, preservation, and mechanical completion activities. Support commissioning and mechanical run-test activities when required. Participate in punch-list clearance and quality inspections. Maintain installation records, inspection reports, and quality documentation. Follow all HSE requirements, work permits, safety procedures, and site instructions. Coordinate effectively with mechanical, electrical, commissioning, QA/QC, and other site teams.Desired Candidate Profile<ul><li>Minimum 5 years of experience in rotating equipment installation.</li><li>Experience in power plant construction projects.</li><li>Knowledge of Gas Turbine, Steam Turbine, Generator, and auxiliary equipment installation.</li><li>Ability to read and interpret mechanical and assembly drawings.</li><li>Knowledge of turbine alignment, rotor installation, and flange assembly.</li><li>Familiarity with Dial Indicators, Micrometers, Feeler Gauges, Precision Levels, and Laser Alignment Systems.</li><li>Knowledge of hydraulic torqueing and mechanical assembly practices.</li><li>Ability to understand and follow OEM installation drawings and manuals.</li><li>Good English communication and reading ability.</li></ul>

0 to 0 years Naukri Gulf

Site Supervisor

On-site - Iraq - Iraq 3 July 2026

Engineering

<section>Job DescriptionRoles & Responsibilities<div class="paragraph">Supervise all Mechanical & Piping commissioning activities within assigned systems.Coordinate Mechanical Completion (MC), Pre-Commissioning, Commissioning, and Start-up activities.Ensure work is executed in accordance with approved commissioning procedures and project schedules.Verify system readiness prior to energization and start-up.Supervise flushing, hydrotesting, pneumatic testing, leak testing, drying, reinstatement, and preservation activities.Coordinate closely with Construction, Process, Electrical, Instrumentation, Operations, and HSE teams.Participate in system walkdowns, punch list clearance, and Mechanical Completion inspections.Review and approve commissioning documentation, check sheets, and test records.Monitor contractor performance and ensure compliance with project quality and HSE requirements.Support integrated commissioning, performance testing, and plant start-up.Prepare daily commissioning reports and communicate progress, issues, and risks to the Commissioning Lead.Schedule: (6) Days/Week, (8) hours/Day.</div></section><section>Desired Candidate ProfileBachelor's Degree in Mechanical Engineering or a related discipline.Minimum 10 years of oil & gas industry experience.Minimum 5 years of Mechanical & Piping Commissioning experience on EPC projects.Proven experience in commissioning process facilities, gas plants, central processing facilities (CPF), refineries, or similar installations.Familiarity with international standards including API, ASME, ISO, and relevant commissioning practices.Excellent communication, coordination, and leadership skills.Experience working in Iraq.</section>

0 to 0 years Bayt

Quality Controller

On-site - Iraq 28 May 2026

Customer Service

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> To monitor and maintain quality standards across automotive service and body shop operations by conducting systematic inspections, validating repair quality, and ensuring all completed work complies with dealership procedures and manufacturer specifications. The role aims to minimize repeat repairs, improve customer satisfaction, and support operational excellence through effective quality control practices and coordination with workshop teams. Conduct final quality inspections on vehicles following mechanical repairs, diagnostics, body repairs, paint work, polishing, detailing, and accessory installations. Verify that all completed repairs and services align with job card requirements, manufacturer procedures, and dealership quality standards. Detect workmanship issues, missing repair items, cosmetic defects, or operational concerns and report them for corrective action. Coordinate closely with Technicians, Diagnostic Technicians, Bodyshop Staff, Supervisors, and Service Advisors to resolve identified quality issues. Perform road tests or functional checks when required to validate repair effectiveness and vehicle performance. Ensure that all safety-related repairs and systems are properly completed and functioning before vehicle delivery. Monitor workshop processes and identify recurring quality issues to support continuous improvement initiatives. Maintain inspection reports, quality checklists, and documentation records accurately within company systems. Support warranty compliance by ensuring repairs and replaced parts meet manufacturer warranty conditions and technical standards. Assist in implementing quality assurance procedures, operational standards, and workshop best practices. Ensure vehicles are clean, properly assembled, and ready for customer handover after repair completion. Participate in internal audits, workshop evaluations, and process improvement activities related to service quality. Follow all workplace health, safety, and environmental regulations during inspection and operational activities. Stay updated on manufacturer technical bulletins, repair methods, and quality control procedures. Educational Level / Required Certificates: Diploma or Bachelor’s degree in Mechanical Engineering, Automotive Engineering, Mechatronics, or a related technical field. Automotive quality inspection or OEM certification is considered an advantage. Experience: Minimum 2–4 years of experience in automotive workshops, dealerships, service centers, or bodyshop operations. Strong understanding of vehicle repair procedures, diagnostics, and automotive quality standards. Experience in inspecting mechanical, electrical, and cosmetic repair work. Familiarity with dealership operations and manufacturer service requirements. Ability to identify technical defects and evaluate repair quality effectively. Experience using workshop management systems and inspection documentation. Knowledge of safety standards and warranty procedures within automotive environments. Previous experience in premium automotive brands or OEM-authorized workshops is preferred. </div>

0 to 0 years Naukri Gulf

HSE Engineer

On-site - Iraq - Iraq 30 June 2026

Research & Development

<section>Job DescriptionRoles & Responsibilities<div class="paragraph">Support the team member of HSE team to prepare deliverable HSE documents such as HSE Plan and other relevant procedures for Project execution.Support the HSE team leader for project Proposals in mostly overseas. Review & prepares pre-qualification response to questionnaires documents from the client, ITB (Instruction to Bidder) review, and summary at the proposal stage. Prepare HSE documentation for clients/projects as per the requirements Support in providing training to HSE team member in project PQ (Project Pre-Qualification) and Project Proposal handling including Project Execution set up concerning Project HSE Management. Develop, implement and improve HSE management systems, processes and procedures to support business operations in accordance with ISO 45001 Develop HSE Alert & HSE Risk Assessment for overseas project sites safety awareness Prepares weekly, quarterly, annual and other HSE related report covering the overseas project sites HSE activities. Support overseas projects with the identification of environmental aspects and determining the project objectives and target Carryout HSE training courses when required</div></section><section>Desired Candidate Profile<h2>Knowledge And Qualifiction</h2>Degree holder in Engineering preferably major in Safety or Mechanical, Civil, Electrical, Industrial or ChemicalAt least Ten (10) years experienced in field as an HSE engineerAt least Two (2) years experienced in PQ/ITB Document Process</section>

Full Time Gulf Talnet

Aerostat Operator I

On-site - Iraq - Baghdad 3 June 2026

Engineering

<h4>Essential responsibilities:</h4> Aerostat operators/user-level maintainers will participate in the overall, hands-on operation of the aerostat system including launch, in-flight, recovery, and moored activities. Candidates will perform all functions to operate the PGSS/PTDS, an aerostat mounted Intelligence, Surveillance, and Reconnaissance (ISR) platform, its Mobile Mooring Platform (MMP), sensor payload(s), communications and navigation systems as well as associated support equipment (boom lift, forklift, all terrain vehicles (ATVs), and electrical power generators). Candidate will perform user-level maintenance functions including performing hands-on preventative maintenance checks and services (PMCS), troubleshooting, removing and replacing line replaceable units (LRUs), and removing and replacing payloads. Candidate must possess a diverse range of skills with the ability to quickly adapt to new situations. Tasks will be performed under direction of higher classified technicians and/or site personnel. <h4>Minimum requirements:</h4> <ul> <li>High school diploma or equivalent is required.</li> <li>Two-year associate’s degree in a technical field from an accredited college can substitute for work experience.</li> <li>Must have an active secret US government clearance. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must have a valid U.S. passport with a minimum of one year remaining.</li> <li>Must have valid US driver's license.</li> <li>Knowledge of and experience in the operations of hardware systems and components.</li> <li>Experience in fault detection, isolation, and correction of hardware systems and individual components.</li> <li>Ability to perform routine system maintenance and analysis functions including: hardware configurations; adding, removing and replacing hardware components; use of hardware and software diagnostic testing tools; reading of electronic circuit schematics; and repairing printed circuit boards.</li> <li>At least one (1) year previous aerostat experience OR two (2) years of experience in the following areas may be substituted in lieu of aerostat experience:</li> </ul> 1) Electrical Maintenance Mechanic <ul> <li>Possess at least two (2) years aerostat experience as an operator at the 20 series level or greater from Army MOS 35F (Intelligence Analyst), 35G (Geospatial Intelligence Imagery Analyst), 35H (Common Ground System Analyst), 96R (Ground Surveillance Systems Operator), 96U (Unmanned Aerial Vehicle Operator), or military branch equivalent.</li> <li>Two years of hands-on experience in performing operations and maintenance tasks either on an aerostat system or a related industry/military equivalent is required.</li> <li>Must be qualified at the 10 series or greater level (via military or civilian technical schools) is required.</li> <li>Ability to read electronic schematics.</li> <li>O&M of electro-mechanical equipment to include one or more of the following: hydraulic/servo valves, hydraulic actuators, control systems, test and diagnostic equipment.</li> </ul> 2) Networking, IT & information systems <ul> <li>Two years’ experience is required.</li> <li>Must be qualified at the 10 series or greater level; MOS 25B/F or other military branch equivalent or industry occupational specialties as a CISCO network administrator; Army MOS 25L/N or other military branch equivalent or industry occupational specialties as a network installation (BICSI or Network+ or Comp T certification) will be considered.</li> <li>CCIE certification with fiber optic certification is preferred.</li> </ul> 3) Mechanical Maintenance <ul> <li>Mechanical maintenance with qualifications at the 10 series or greater from U.S. Army MOS 94D/X and 91/B/S/W or other military branch equivalent, or industry occupational specialties such as National Institute for Automotive Service Excellence (ASE) certified truck mechanic or Federal Aviation Administration (FAA) general mechanic 1 or greater.</li> <li>Two years of hands-on experience on an aerostat system or a related industry/military equivalent is required.</li> <li>O&M of mechanical equipment to include one or more of the following: hydraulic systems, winch systems, tether/cable handling systems, industrial generator sets, power switch gear, HVAC, cranes aerial lift, forklift, industrial generator sets.</li> </ul> <h4>Physical requirements:</h4> <ul> <li>Requires the ability to regularly lift up to 50 lbs.</li> <li>Requires the ability to regularly climb extension ladders, roof ladder, stepladders, and stairs at least 10 times during shift.</li> <li>Requires the flexibility to bend/stoop, squat repetitive during shift.</li> <li>Requires the ability to regularly kneel repetitive for shift.</li> <li>Requires the ability to move in a 90-degree fashion on a repetitive basis for shift.</li> <li>Requires the ability to stretch/reach on a repetitive basis for shift.</li> <li>Requires the ability to walk extensively throughout the plant during shift.</li> <li>Requires the ability to interact with all clients in a professional and friendly manner despite periods of stress.</li> </ul> <h4>Medical requirements:</h4> <ul> <li>Successfully complete and pass the medical and dental examinations as required by employer and customer for deployment to Iraq.</li> <li>Must maintain physical and dental requirements for the duration of the deployment.</li> </ul> <h4>Working and living conditions:</h4> This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environment. Temperatures can reach 120-130 degrees Fahrenheit/50-55 degrees Celsius during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to CENTCOM, EUCOM, and AFRICOM for extended periods. Work schedules are a minimum of 6 days per week and 10 hours per day, while some jobs have higher daily and weekly minimums.

Full Time Gulf Talnet

Aerostat Operator I

On-site - Iraq - Baghdad 3 June 2026

Engineering

<h4>Essential responsibilities:</h4> Aerostat operators/user-level maintainers will participate in the overall, hands-on operation of the aerostat system including launch, in-flight, recovery, and moored activities. Candidates will perform all functions to operate the Persistent Ground Surveillance System (PGSS) and Persistent Threat Detection System (PTDS), an aerostat-mounted intelligence, surveillance, and reconnaissance (ISR) platform, its mobile mooring platform (MMP), sensor payload(s), communications and navigation systems, as well as associated support equipment (boom lift, forklift, all-terrain vehicles (ATVs), and electrical power generators). Candidates will perform user-level maintenance functions including performing hands-on preventative maintenance checks and services (PMCS), troubleshooting, removing and replacing line replaceable units (LRUs), and removing and replacing payloads. Candidates must possess a diverse range of skills with the ability to quickly adapt to new situations. Tasks will be performed under the direction of higher classified technicians and/or site personnel. <h4>Minimum requirements:</h4> <ul> <li>High school diploma or equivalent is required.</li> <li>Two-year associate’s degree in a technical field from an accredited college can substitute for work experience.</li> <li>Must have an active secret US government clearance. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must have a valid U.S. passport with a minimum of one year remaining.</li> <li>Must have a valid US driver’s license.</li> <li>Knowledge of and experience in the operations of hardware systems and components.</li> <li>Experience in fault detection, isolation, and correction of hardware systems and individual components.</li> <li>Ability to perform routine system maintenance and analysis functions including hardware configurations; adding, removing, and replacing hardware components; use of hardware and software diagnostic testing tools; reading of electronic circuit schematics; and repairing printed circuit boards.</li> <li>At least one (1) year previous aerostat experience OR two (2) years of experience in the following areas may be substituted in lieu of aerostat experience: <ul> <li>Electrical maintenance mechanic: Possess at least two (2) years aerostat experience as an operator at the 20 series level or greater from Army MOS 35F (Intelligence Analyst), 35G (Geospatial Intelligence Imagery Analyst), 35H (Common Ground System Analyst), 96R (Ground Surveillance Systems Operator), 96U (Unmanned Aerial Vehicle Operator), or military branch equivalent. Two years of hands-on experience in performing operations and maintenance tasks either on an aerostat system or a related industry/military equivalent is required. Must be qualified at the 10 series or greater level (via military or civilian technical schools). Ability to read electronic schematics. O&M of electro-mechanical equipment to include one or more of the following: hydraulic/servo valves, hydraulic actuators, control systems, test and diagnostic equipment.</li> <li>Networking, IT & information systems: Two years’ experience is required. Must be qualified at the 10 series or greater level; MOS 25B/F or other military branch equivalent or industry occupational specialties as a CISCO network administrator; Army MOS 25L/N or other military branch equivalent or industry occupational specialties as a network installation (BICSI or Network+ or CompTIA certification) will be considered. CCIE certification with fiber optic certification is preferred.</li> <li>Mechanical maintenance: Mechanical maintenance with qualifications at the 10 series or greater from U.S. Army MOS 94D/X and 91/B/S/W or other military branch equivalent, or industry occupational specialties such as National Institute for Automotive Service Excellence (ASE) Certified Truck Mechanic or Federal Aviation Administration (FAA) General Mechanic 1 or greater. Two years of hands-on experience on an aerostat system or a related industry/military equivalent is required. O&M of mechanical equipment to include one or more of the following: hydraulic systems, winch systems, tether/cable handling systems, industrial generator sets, power switch gear, HVAC, cranes, aerial lift, forklift, industrial generator sets.</li> </ul> </li> </ul> <h4>Physical requirements:</h4> <ul> <li>Requires the ability to regularly lift up to 50 lbs.</li> <li>Requires the ability to regularly climb extension ladders, roof ladders, stepladders, and stairs at least 10 times during shift.</li> <li>Requires the flexibility to bend/stoop and squat repetitively during shift.</li> <li>Requires the ability to regularly kneel repetitively during shift.</li> <li>Requires the ability to move in a 90-degree fashion on a repetitive basis during shift.</li> <li>Requires the ability to stretch/reach on a repetitive basis during shift.</li> <li>Requires the ability to walk extensively throughout the plant during shift.</li> <li>Requires the ability to interact with all clients in a professional and friendly manner despite periods of stress.</li> </ul> <h4>Medical requirements:</h4> <ul> <li>Successfully complete and pass the medical and dental examinations as required for deployment.</li> <li>Must maintain physical and dental requirements for the duration of the deployment.</li> </ul> <h4>Working and living conditions:</h4> This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environments. Temperatures can reach 120-130 degrees Fahrenheit (50-55 degrees Celsius) during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to CENTCOM, EUCOM, and AFRICOM for extended periods. Work schedules are a minimum of six days per week and ten hours per day, while some jobs have higher daily and weekly minimums.

Full Time Gulf Talnet

Operator

On-site - Iraq - Baghdad 3 June 2026

Engineering

<h4>Essential responsibilities:</h4> Aerostat operators/user-level maintainers will participate in the overall, hands-on operation of the aerostat system including launch, in-flight, recovery, and moored activities. Candidates will perform all functions to operate the PGSS/PTDS, an aerostat mounted Intelligence, Surveillance, and Reconnaissance (ISR) platform, its Mobile Mooring Platform (MMP), sensor payload(s), communications and navigation systems as well as associated support equipment (boom lift, forklift, all terrain vehicles (ATVs), and electrical power generators). Candidate will perform user-level maintenance functions including performing hands-on preventative maintenance checks and services (PMCS), troubleshooting, removing and replacing line replaceable units (LRUs), and removing and replacing payloads. Candidate must possess a diverse range of skills with the ability to quickly adapt to new situations. Tasks will be performed under direction of higher classified technicians and/or site personnel. <h4>Minimum requirements:</h4> <ul> <li>High school diploma or equivalent is required.</li> <li>Two-year associate’s degree in a technical field from an accredited college can substitute for work experience.</li> <li>Must have an active secret US government clearance. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must have a valid U.S. passport with a minimum of one year remaining.</li> <li>Must have valid US driver’s license.</li> <li>Knowledge of and experience in the operations of hardware systems and components.</li> <li>Experience in fault detection, isolation, and correction of hardware systems and individual components.</li> <li>Ability to perform routine system maintenance and analysis functions including: hardware configurations; adding, removing and replacing hardware components; use of hardware and software diagnostic testing tools; reading of electronic circuit schematics; and repairing printed circuit boards.</li> <li>At least one (1) year previous aerostat experience OR two (2) years of experience in the following areas may be substituted in lieu of aerostat experience:</li> </ul> <h4>1) Electrical maintenance mechanic</h4> <ul> <li>Possess at least two (2) years aerostat experience as an operator at the 20 series level or greater from Army MOS 35F (Intelligence Analyst), 35G (Geospatial Intelligence Imagery Analyst), 35H (Common Ground System Analyst), 96R (Ground Surveillance Systems Operator), 96U (Unmanned Aerial Vehicle Operator), or military branch equivalent.</li> <li>Two years of hands-on experience in performing operations and maintenance tasks either on an aerostat system or a related industry/military equivalent is required.</li> <li>Must be qualified at the 10 series or greater level (via military or civilian technical schools) is required.</li> <li>Ability to read electronic schematics.</li> <li>O&M of electro-mechanical equipment to include one or more of the following: <ul> <li>Hydraulic/servo valves</li> <li>Hydraulic actuators, control systems</li> <li>Test and diagnostic equipment</li> </ul> </li> </ul> <h4>2) Networking, IT & information systems</h4> <ul> <li>Two years’ experience is required.</li> <li>Must be qualified at the 10 series or greater level; MOS 25B/F or other military branch equivalent or industry occupational specialties as a CISCO network administrator; Army MOS 25L/N or other military branch equivalent or industry occupational specialties as a network installation (BICSI or Network+ or Comp T certification) will be considered.</li> <li>CCIE certification with fiber optic certification is preferred.</li> </ul> <h4>3) Mechanical maintenance</h4> <ul> <li>Mechanical maintenance with qualifications at the 10 series or greater from U.S. Army MOS 94D/X and 91/B/S/W or other military branch equivalent, or industry occupational specialties such as National Institute for Automotive Service Excellence (ASE) certified truck mechanic or Federal Aviation Administration (FAA) general mechanic 1 or greater.</li> <li>Two years of hands-on experience on an aerostat system or a related industry/military equivalent is required.</li> <li>O&M of mechanical equipment to include one or more of the following: hydraulic systems, winch systems, tether/cable handling systems, industrial generator sets, power switch gear, HVAC, cranes aerial lift, forklift, industrial generator sets.</li> </ul> <h4>Physical requirements:</h4> <ul> <li>Requires the ability to regularly lift up to 50 lbs.</li> <li>Requires the ability to regularly climb extension ladders, roof ladder, stepladders, and stairs at least 10 times during shift.</li> <li>Requires the flexibility to bend/stoop, squat repetitive during shift.</li> <li>Requires the ability to regularly kneel repetitive for shift.</li> <li>Requires the ability to move in a 90-degree fashion on a repetitive basis for shift.</li> <li>Requires the ability to stretch/reach on a repetitive basis for shift.</li> <li>Requires the ability to walk extensively throughout the plant during shift.</li> <li>Requires the ability to interact with all clients in a professional and friendly manner despite periods of stress.</li> </ul> <h4>Medical requirements</h4> <ul> <li>Successfully complete and pass the medical and dental examinations as required for deployment.</li> <li>Must maintain physical and dental requirements for the duration of the deployment.</li> </ul> <h4>Working and living conditions:</h4> This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environment. Temperatures can reach 120-130 degrees Fahrenheit (50-55 degrees Celsius) during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to CENTCOM, EUCOM, and AFRICOM for extended periods. Work schedules are a minimum of 6 days per week and 10 hours per day, while some jobs have higher daily and weekly minimums.

4 - 9 Years Naukri Gulf

Deployment Engineer

On-site - Iraq - Iraq 4 August 2026

Engineering

Following up all CME (Civil, Mechanical and Electrical) action, activities and modification related to CME tasks in sites Following up site construction, civil, power and telecom works on field and on daily basis with subcontractors. Checking installing all tower types erection (Tower, Mast Tower, Poles, etc.) which will be implemented by subcontractors or Asia cell teams under supervision. Reporting the issues related to site construction to the supervisor on daily basis, in addition reporting all the defects to subcontractors for fixing it. Reporting work progress and construction status for each site on daily basis. Prepare initial site layouts and civil/power/telecom work construction details and getting instruction from his superiors. Addressing each site requirement before implementation and get the required instruction and technical solutions before and during construction. Improving the quality of site work s by controlling implementation on field amending it according to Asia cell specifications. Following up deploying Asia cell technical specification in site construction. Following up applying all necessary technical tests on the materials and works in a professional way and discussing the results with his superiors. Coordination with other department (Acquisition team, RF, TR, Security) for new sites or expansion survey Preparing the actual BOQs for the sites that were constructed by subcontractor. Checking sites before warranty period came to end and monitoring defects till it be fixing. Tracking the site construction time line for each site during implementation.Desired Candidate Profile<ul><li>Bachelor's degree in engineering.</li><li>Minimum 4 years experience in (Civil, power, telecom) Engineering Field or equivalent</li><li>Language skills (Arabic and English)</li><li>Field supervision skills</li><li>Computer skills (Microsoft office), AutoCAD.</li><li>Having a Valid Engineers Union ID Card</li></ul>Behavioral Competencies:<ul><li>Delivering Results & Fostering Ownership.</li><li>Building Customer Value.</li><li>Networking & Influencing Collaboratively</li><li>Leading Teams</li><li>Driving Change</li></ul>Technical Competencies:<ul><li>Active Infrastructure Rollout</li><li>Analytical Thinking</li><li>Passive Infrastructure Deployment</li><li>Passive Network Operations</li><li>Problem Solving</li><li>Technical Specifications Development</li><li>Technical Writing and Reporting</li></ul>

2 - 7 Years Naukri Gulf

Site Management Technician

On-site - Iraq - Iraq 19 June 2026

Engineering

<section>Job DescriptionRoles & Responsibilities<div class="paragraph">Responsible for supporting site connectivity (NGP & LDG), maintenance, and overall site operations, ensuring functionality, safety, and compliance, while coordinating with vendors and stakeholders in line with company standards. Follow up connection of electricity to the sites processes until final stage, follow up all issues that related to connecting NGP, local generator & Water to the sites & buildings all areas Follow up maintenance for the NGP & LDG of the sites & buildings all areas. Collecting, preparing list & auditing Site Grid Power Elec.bill, LDG bill & Water bills of the sites & buildings all areas. Coordinate with safety maintenance companies for site visits and inspections (e.g., fire extinguisher checks, safety guard visits). Install and maintain safety signage at sites. Participate in the Fire Incident Committee and respond to incidents accordingly. Supervise removal of grass and other landscaping issues by coordinating outsourced workers coordination with Government Committees to determine monthly GFS amounts. Oversee FMD (Fuel Management Device) installation and maintenance, ensuring vendor coordination. Manage site fuel supply and replacement of level hoses Handle discrepancies in fuel quantity reports. Participate in committees to analyze fuel loss and determine pricing with internal departments Supervise pipe installation and maintenance between tanks and generators. Organize and manage periodic tank washing. Coordinate preventative maintenance site visits and ensure completion of checklists Follow up Outage in the sites & closing the Tickets. Based on AUTN system or any other system created by Asia cell</div></section><section>Desired Candidate Profile<ul><li>High school or above</li><li>minimum duration 2 years</li><li>Motivation for improving and empowering others</li><li>Basic Computer skill (Word, excel, outlook & Power Point)</li><li>Language skills (Arabic, English) speaking & writing</li><li>Behavioral Competencies: Delivering Results & Fostering Ownership Building Customer Value Networking & Influencing Collaboratively Leading Teams Shaping Strategy Driving Change</li><li>Technical Competencies: Business Case Development Conflict Resolution Fuel Management Problem Solving Government Relations Mechanical, Electrical & Plumbing Knowledge</li></ul></section>

1 - 3 Years Naukri Gulf

Aerostat Operator I

On-site - Iraq - Iraq 3 June 2026

Engineering

<section>Job DescriptionRoles & Responsibilities<div class="paragraph">Aerostat Operators provide Operations and Sustainment (O&S) support for the Persistent Surveillance Systems Tethered (PSS-T) program in OCONUS site locations. PSS-T is comprised of former Persistent Ground Surveillance System (PGSS) and Persistent Threat Detection System (PTDS) programs. Position will require 6-week 34M training TDY to Elizabeth City, South Carolina. Essential Responsibilities: Aerostat Operators/User-level maintainers will participate in the overall, hands-on operation of the aerostat system including launch, in-flight, recovery, and moored activities. Candidates will perform all functions to operate the PGSS/PTDS, an aerostat mounted Intelligence, Surveillance, And Reconnaissance (ISR) platform, its Mobile Mooring Platform (MMP), Sensor Payload(s), communications and navigation systems as well as associated support equipment (Boom Lift, Forklift, All Terrain Vehicles (ATV's), and Electrical Power Generators). Candidate will perform User-level maintenance functions include performing hands-on Preventative Maintenance Checks and Services (PMCS), troubleshooting, removing and replacing Line Replaceable Units (LRUs), and removing and replacing payloads. Candidate must possess a diverse range of skills with the ability to quickly adapt to new situations. Tasks will be performed under direction of higher classified technicians and/or site personnel.</div></section><section>Desired Candidate Profile<ul><li>High school diploma or equivalent is required.</li><li>Two-year Associate s degree in a technical field from an accredited college can substitute for work experience.</li><li>Must have an active Secret US Government Clearance. Note: US Citizenship is required to obtain a Secret Clearance.</li><li>Must have a valid U.S. passport with a minimum of one year remaining.</li><li>Must have valid US Driver's license.</li><li>Knowledge of and experience in the operations of hardware systems and components.</li><li>Experience in fault detection, isolation, and correction of hardware systems and individual components.</li><li>Ability to perform routine system maintenance and analysis functions including: hardware configurations; adding, removing and replacing hardware components; use of hardware and software diagnostic testing tools; reading of electronic circuit schematics; and repairing printed circuit boards.</li><li>At least one (1) year previous Aerostat experience OR two (2) years of experience in the following areas may be substituted in lieu of aerostat experience:</li><ul><li>1) Electrical Maintenance Mechanic Possess at least two (2) year s aerostat experience as an operator at the 20 series level or greater from Army MOS 35F (Intelligence Analyst), 35G (Geospatial Intelligence Imagery Analyst), 35H (Common Ground System Analyst), 96R (Ground Surveillance Systems Operator), 96U (Unmanned Aerial Vehicle Operator), or military branch equivalent. Two years of hands-on experience in performing operations and maintenance tasks either on an AEROSTAT system or a related industry/military equivalent is required. Must be qualified at the 10 series or greater level (via military or civilian technical schools) is required. Ability to read electronic schematics. O&M of electro-mechanical equipment to include one or more of the following: Hydraulic/servo valves Hydraulic actuators, control systems Test and diagnostic equipment</li><li>2) Networking, IT & information systems Two years experience is required. Must be qualified at the 10 series or greater level; MOS 25B/F or other military branch equivalent or industry occupational specialties as a CISCO Network Administrator; Army MOS 25L/N or other military branch equivalent or industry occupational specialties as a Network Installation (BICSI or Network + or Comp T Certification) will be considered. CCIE certification with fiber optic certification is preferred.</li><li>3) Mechanical Maintenance Mechanical Maintenance with qualifications at the 10 series or greater from U.S. Army MOS 94D/X and 91/B/S/W or other military branch equivalent, or industry occupational specialties such National Institute for Automotive Service Excellence (ASE) Certified Truck Mechanic or Federal Aviation Administration (FAA) General Mechanic 1 or greater. Two years of hands-on experience on an AEROSTAT system or a related industry/military equivalent is required. O&M of mechanical equipment to include one or more of the following: Hydraulic systems, Winch systems, Tether/cable handling systems, Industrial generator sets, Power switch gear, HVAC, Cranes Aerial lift , Forklift , Industrial generator sets</li></ul><li>Physical Requirements: Requires the ability to regularly lift up to 50 lbs. Requires the ability to regularly climb extension ladders, roof ladder, stepladders, and stairs at least 10 times during shift. Requires the flexibility to bend/stoop, squat repetitive during shift. Requires the ability to regularly kneel repetitive for shift. Requires the ability to move in a 90-degree fashion on a repetitive basis for shift. Requires the ability to stretch/reach on a repetitive basis for shift. Requires the ability to walk extensively throughout the plant during shift. Requires the ability to interact with all clients in a professional and friendly manner despite periods of stress.</li><li>Medical Requirements Successfully complete and pass the medical and dental examinations as required by Amentum and our customer for deployment to Iraq. Must maintain physical and dental requirements for the duration of the deployment.</li><li>Working and Living Conditions: This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environment. Temperatures can reach PHONE_NUMBER degrees Fahrenheit/50-55 degrees Celsius during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to CENTCOM, EUCOM, and AFRICOM for extended periods. Work schedules are a minimum of 6 days per week and 10 hours per day, while some jobs have higher daily and weekly minimums.</li></ul></section>

Full Time Gulf Talnet

Aerostat Operator

On-site - Iraq - Baghdad 3 June 2026

Engineering

<h4>Essential responsibilities:</h4> Aerostat operators and user-level maintainers will participate in the overall, hands-on operation of the aerostat system including launch, in-flight, recovery, and moored activities. Candidates will perform all functions to operate the Persistent Ground Surveillance System (PGSS) and Persistent Threat Detection System (PTDS), an aerostat-mounted intelligence, surveillance, and reconnaissance (ISR) platform, its mobile mooring platform (MMP), sensor payload(s), communications and navigation systems, as well as associated support equipment such as boom lift, forklift, all-terrain vehicles (ATVs), and electrical power generators. Candidates will perform user-level maintenance functions including performing hands-on preventative maintenance checks and services (PMCS), troubleshooting, removing and replacing line replaceable units (LRUs), and removing and replacing payloads. Candidates must possess a diverse range of skills with the ability to quickly adapt to new situations. Tasks will be performed under the direction of higher classified technicians and/or site personnel. <h4>Minimum requirements:</h4> <ul> <li>High school diploma or equivalent is required.</li> <li>Two-year associate’s degree in a technical field from an accredited college can substitute for work experience.</li> <li>Must have an active secret US government clearance. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must have a valid U.S. passport with a minimum of one year remaining.</li> <li>Must have a valid US driver’s license.</li> <li>Knowledge of and experience in the operations of hardware systems and components.</li> <li>Experience in fault detection, isolation, and correction of hardware systems and individual components.</li> <li>Ability to perform routine system maintenance and analysis functions including hardware configurations; adding, removing and replacing hardware components; use of hardware and software diagnostic testing tools; reading of electronic circuit schematics; and repairing printed circuit boards.</li> <li>At least one year previous aerostat experience or two years of experience in the following areas may be substituted in lieu of aerostat experience:</li> </ul> <h4>1) Electrical maintenance mechanic</h4> <ul> <li>Possess at least two years aerostat experience as an operator at the 20 series level or greater from Army MOS 35F (Intelligence Analyst), 35G (Geospatial Intelligence Imagery Analyst), 35H (Common Ground System Analyst), 96R (Ground Surveillance Systems Operator), 96U (Unmanned Aerial Vehicle Operator), or military branch equivalent.</li> <li>Two years of hands-on experience in performing operations and maintenance tasks either on an aerostat system or a related industry/military equivalent is required.</li> <li>Must be qualified at the 10 series or greater level (via military or civilian technical schools).</li> <li>Ability to read electronic schematics.</li> <li>Operations and maintenance of electro-mechanical equipment to include one or more of the following: <ul> <li>Hydraulic/servo valves</li> <li>Hydraulic actuators, control systems</li> <li>Test and diagnostic equipment</li> </ul> </li> </ul> <h4>2) Networking, IT and information systems</h4> <ul> <li>Two years’ experience is required.</li> <li>Must be qualified at the 10 series or greater level; MOS 25B/F or other military branch equivalent or industry occupational specialties as a CISCO network administrator; Army MOS 25L/N or other military branch equivalent or industry occupational specialties as a network installation (BICSI or Network+ or CompTIA certification) will be considered.</li> <li>CCIE certification with fiber optic certification is preferred.</li> </ul> <h4>3) Mechanical maintenance</h4> <ul> <li>Mechanical maintenance with qualifications at the 10 series or greater from U.S. Army MOS 94D/X and 91/B/S/W or other military branch equivalent, or industry occupational specialties such as National Institute for Automotive Service Excellence (ASE) certified truck mechanic or Federal Aviation Administration (FAA) general mechanic 1 or greater.</li> <li>Two years of hands-on experience on an aerostat system or a related industry/military equivalent is required.</li> <li>Operations and maintenance of mechanical equipment to include one or more of the following: <ul> <li>Hydraulic systems</li> <li>Winch systems</li> <li>Tether/cable handling systems</li> <li>Industrial generator sets</li> <li>Power switch gear</li> <li>HVAC</li> <li>Cranes, aerial lift, forklift</li> </ul> </li> </ul> <h4>Physical requirements:</h4> <ul> <li>Requires the ability to regularly lift up to 50 lbs.</li> <li>Requires the ability to regularly climb extension ladders, roof ladder, stepladders, and stairs at least 10 times during shift.</li> <li>Requires the flexibility to bend, stoop, and squat repetitively during shift.</li> <li>Requires the ability to regularly kneel repetitively during shift.</li> <li>Requires the ability to move in a 90-degree fashion on a repetitive basis during shift.</li> <li>Requires the ability to stretch and reach on a repetitive basis during shift.</li> <li>Requires the ability to walk extensively throughout the plant during shift.</li> <li>Requires the ability to interact with all clients in a professional and friendly manner despite periods of stress.</li> </ul> <h4>Medical requirements:</h4> <ul> <li>Successfully complete and pass the medical and dental examinations as required for deployment.</li> <li>Must maintain physical and dental requirements for the duration of the deployment.</li> </ul> <h4>Working and living conditions:</h4> This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environment. Temperatures can reach 120-130 degrees Fahrenheit (50-55 degrees Celsius) during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to CENTCOM, EUCOM, and AFRICOM for extended periods. Work schedules are a minimum of six days per week and 10 hours per day, while some jobs have higher daily and weekly minimums. Position requires a six-week 34M training temporary duty assignment (TDY) to Elizabeth City, South Carolina.

0 to 0 years Bayt

Senior TAR Supervisor E&I

On-site - Iraq 2 July 2026

Engineering

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Wood is recruiting for an Instrumentation and Electrical (E&I) TAR Supervisor to join its Iraq business unit for one of our operating clients. This role is a full-time on-site role in Basra, Iraq . Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy & Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com Diversity Statement  We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws. Responsibilities: Remarkable people, trusted by clients to design and advance the world. Wood is recruiting for an Instrumentation and Electrical (E&I) TAR Supervisor to join its Iraq business unit for one of our operating clients. This role is a full-time on-site role in Basra, Iraq. #Wood #Iraq #Basra #TAR Supervisor (E&I) The role This is an exciting opportunity for an experienced Instrumentation and Electrical (E&I) TAR Supervisor to join our Iraq Business Unit. Our Clients and Projects  Designing the future. Transforming the world.  This project is to focus more resources towards improving maintenance and reliability on the Oil, Gas & Water Systems, required to efficiently support maintenance, turn arounds and engineering organizations with the appropriate qualifications and experience. What we can offer <ul> <li>Meaningful and interesting projects Delivered to high profile clients and complex projects in Iraq </li> <li>Commitment to Diversity and Inclusion; we are an organisation actively committed to diversity and inclusion across our business with employee networks committed to giving all employees a voice </li> <li>Competitive salary with regular salary reviews to ensure we are rewarding at the right level in line with the market </li> <li>Medical Insurance: Ensures inpatient and outpatient medical care is available should you require treatment. </li> <li>Commitment to continued professional development; development plans that are tailored to your individual needs and interests </li> <li>Global connections: join experts around the world who are at the leading edge of our industry, shaping the standards of our profession </li> <li>Long Service Award: Wood values the commitment and loyalty of our people. Celebrating Long Service provides an opportunity for the business to demonstrate their appreciation of the hard work, dedication and many years’ services of our employees at 5-year service milestones </li></ul>Key Objectives Scope of Responsibilities: <ul> <li>Support the TAR Lead and TAR Coordinator with the safe and efficient delivery of the TAR program. Familiar with the HSE regulations, Fire Safety Rules, industrial safety requirements when performing works at a hazardous location.</li> <li>Promote strong Health, Safety & Environmental culture.  Lead by example. Ensure Toolbox Talks are structured, recorded & add value.</li> <li>Embrace a one team culture.</li> <li>Thorough understanding of Turnarounds and Maintenance to provide guidance for field execution of TAR I&E scopes. </li> <li>Familiar with E&I equipment used in Oil and Gas Facilities such as Switchgear components, Field Instruments (Pressure, Level, Flow & Temperature Instruments), Actuated valves, Control and Safety Systems, etc. Knowledge Emmerson control systems is preferable. </li> <li>Experience in reading and interpreting P&IDs, Electrical SLDs, Cable Layout Drawings, Trench Routing Drawings, Control Room Layouts, Cabinet GA Drawings, Cabinet Wiring Drawings, Cause & Effect etc. Design/ Detail Engineering Knowledge would be added advantage.</li> <li>Ability to manage concurrent activities safely & effectively and deconflict SIMOPS.</li> <li>Ability to communicate well with other functions, including Maintenance, Inspection, Engineering, Operations, Projects to deliver the plan.</li> <li>Complete site visits for all I&E scopes of work in support of site execution and complete visibility reports for the I&E Turnaround Scopes to ensure that all aspects of the job are captured within engineered work packages.  </li> <li>Develop I&E work packages in line with Rumaila standards to ensure all aspects of the I&E scopes have been captured within the work package. </li> <li>Work with Operations to develop culture of best practice Instrumentation and panel isolations for consistency of safe equipment shutdown preparation & support efficient de-isolation and re-commissioning.</li> <li>Ensure vendors with required expertise, spares, products, consumables, scaffolding, vehicular and other enabling logistics are at the worksite when required.</li> <li>Supervision of I&E contractor staff during Turnaround executions in support of the safe and efficient delivery of the I&E Turnaround work scope within the planned window. </li> <li>Manage all aspects of I&E TAR scope from start to finish including mobilization to and de-mob from worksite. Strictly in accordance with; good oilfield practice, ROO engineering standards, safety and quality processes and procedures.</li> <li>Drive consistency in TAR preparation process using checklists and other tools to track readiness against agreed Turnaround Milestones.</li> <li>Understand Security and Emergency Response rationale and mentor as appropriate.</li> <li>Provide input to on the duration and resource requirements to the planner to ensure accurate development of Turnaround execution schedules. </li> <li>During Turnaround execution ensure that the Planner receives accurate progress on I&E work scopes under their responsibility. </li> <li>Working with procurement, ensure management of spares and materials. Prioritize and identify long lead items in advance.</li> <li>Management of I&E contractor performance, monitoring and mentoring during site execution.</li> <li>Detailed daily reporting.  Clear communication to back-to-back position through handovers pre / post field breaks and across shifts (day/night).</li> <li>Drive continuous improvements in efficiency and cost reduction of TAR delivery.</li></ul>Supervisory Responsibility <ul> <li>Lead on-site team of Contractors</li> <li>Site supervision of construction contractors for execution of pre-Tar and TAR activity, to plan</li> <li>Safe execution of I&E site activities</li> <li>Ensure quality in construction execution</li> <li>Input to site execution plan, helping to identify and mitigate any schedule risks</li> <li>Identification of pre-TAR works</li> <li>Interface between contractors, operations, Basra Oil Company (BOC) for site execution</li> <li>Ensure materials availability at the work site in readiness for TAR execution</li> <li>Ensure plant and equipment available and set up in readiness for TAR execution</li> <li>Input to lessons learned</li></ul>Work Contacts <ul> <li>Operations & Maintenance</li> <li>HSE Team</li> <li>Contract Supervision</li> <li>Project Function</li> <li>Engineering</li> <li>Integrity / Inspection teams</li> <li>Planning Team</li> <li>Procurement Coordinator</li></ul>Physical Effort and Work Environment <ul> <li>Duties performed at site with generally harsh climatic conditions.</li></ul> Qualifications: What makes you remarkable?  At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world’s most critical challenges.   Expected: <ul> <li>10+ years’ experience in Petrochemical or Oil and Gas maintenance & engineering environment. With a proven track record for commissioning / construction activities on oil and gas sites</li> <li>2+ years’ experience in Turnarounds</li> <li>HNC qualification (preferably a degree) or higher in I&E Engineering or equivalent with strong understanding of engineering fundamentals.</li> <li>Familiar with Hazardous Area Classification, CompEX certification is considered an advantage. </li> <li>Intermediate communication (oral and written) skills in English </li> <li>Good knowledge of asset management system (CMMS) - preferable</li> <li>Demonstrate a positive attitude and embrace clients’ charter values. </li> <li>Foster good relationships and team working ethic with contractor groups to promote safe working practices and efficiency.</li> <li>Experience of working in an integrated team from diverse locations required.</li> <li>Experience of Safe Systems of Work.</li></ul> </div>

Bayt

Reporting Engineer

On-site - Iraq 31 July 2026

Education & Training

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Title: Reporting Engineer Job Description Division : CSSP (Ratawi Hub – Iraq) Direction : PCM  Job title:Reporting Engineer Situation in organization Reporting Engineer position is within the Project Control Organization of the Project reporting to the Planning & Reporting Manager.  Job dimensions The Reporting Engineer is responsible for collecting, analyzing, and presenting project performance data to support decision-making and ensure transparency across all phases of the CSSP Project. The role contributes to the timely and accurate delivery of internal and external reports, dashboards, and KPIs, including HSE and risk-related metrics. In addition, the Reporting Engineer is responsible for supporting project digitalization and information management initiatives, ensuring the effective governance, quality, accessibility, and integration of project information across all participating organizations. The position oversees the Information Management Assistant function and promotes the efficient use of digital collaboration platforms, reporting systems, document management tools, and data-sharing solutions to enhance project execution and stakeholder alignment. The role acts as a focal point between Project Controls, Engineering, Construction, HSE, Contractors, and Company  stakeholders to ensure consistency, traceability, and reliability of project data and information throughout the project lifecycle.  Iraq Common Seawater Supply Project (CSSP) intends to provide treated seawater to the oil fields in southern Iraq  (for injection). CSSP is composed of water pipelines which are part of Basra Oil Company (BOC) scope of work, and  the Water Infrastructure Project (WIP), previously named STF (Seawater Treatment Facilities). The WIP will be located on the west side of the Khor Al Zubair, upstream of the port of Umm Qasr. The major components of the WIP include seawater intake and outfall structures, material offloading facility, seawater clarification, filtration and deoxygenating processes, shipping pumps, a fuel gas pipeline, power generation, utilities and non-process. The budget of the WIP is circa $3Bln. The Reporting Engineer is expected to commence duties in the 3rd Qtr 2026 and will be based in Basra. Activities 1-Reporting & Analysis <ul><li>Collect and validate progress data from various project disciplines (engineering, procurement, construction, HSE, etc.) </li><li>Prepare and update weekly/monthly progress reports, dashboards, and executive summaries. </li><li>Track and report key performance indicators (KPIs), including physical progress, productivity, and forecasted completion dates. </li><li>Support the Planning & Reporting Manager in preparing presentations for internal and external stakeholders.</li><li>Ensure consistency and traceability of reporting documentation across all project phases. </li></ul>2-HSE & Risk Reporting <ul><li>Monitor and report HSE performance indicators (e.g., LTIs, TRIR, safety observations) in coordination with HSE teams. </li><li>Maintain and update HSE dashboards and integrate safety metrics into overall project reporting. </li><li>Assist in compiling and presenting periodic risk assessments and mitigation tracking. </li></ul>3-Systems & Tools <ul><li>Use reporting tools such as Power BI, Excel, Word, PowerPoint, and project control systems to generate visualizations and reports. </li><li>Ensure data integrity and alignment between planning, cost control, and reporting systems. </li></ul> 4-Documentation & Compliance <ul><li>Ensure compliance with TotalEnergies, BOC, and Project standards for reporting procedures </li><li>Support audits, reviews, and project evaluations by providing accurate and timely reporting documentation </li><li>Coordinate with internal departments (Planning, Cost Control, Contracts, HSE) to ensure reporting accuracy.  5- Information Management & Digitalization </li><li>Lead project information management and digitalization activities. </li><li>Supervise the Information Management Assistant and oversee project information, data, and records management. </li><li>Ensure information quality, consistency, accessibility, and traceability across all project stakeholders. </li><li>Coordinate information exchange between Company and Contractors. </li><li>Support and optimize digital tools and platforms, including SharePoint, Power BI, and document management systems. </li><li>Develop and maintain project data repositories, dashboards, and reporting systems. </li></ul> Context and environment TotalEnergies is acting as Contractor to BOC. After the completion of the Project, the Facilities will be handed over to BOC for operation.  Accountabilities The Reporting Engineer is responsible for collecting, analysing, and presenting project performance data while ensuring effective information management and digital collaboration across the CSSP Project. The role drives reporting excellence, supports project digitalization initiatives, supervises the Information Management Assistant, and ensures that project information is accurate, accessible, integrated, and available to support timely decision- making across all stakeholders.  Qualifications / Experience required <ul><li>Degree in Engineering, Data Analytics, or related field </li><li>Minimum 5 years of experience in pro</li></ul> </div>

Bayt

Project Interface Engineer

On-site - Iraq 10 August 2026

Construction & Real Estate

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> We are supporting a leading international Oil & Gas company in to hire an experienced Project Interface Engineer. This is a unique opportunity to contribute to a high-impact project, working alongside global experts on one of the region’s most strategic energy developments. NES has deep insight into their culture and hiring expectations - allowing us to support candidates effectively throughout the hiring process. Job Description<ul><li>Role- Project Interface Engineer.</li><li>Location: Al-Anbar Governate, Iraq </li><li>Work Pattern: Rotation– 6 weeks on 3 weeks off</li><li>Daily pay rate </li><li>Verbal and written communication in English is mandatory</li></ul>Why This Opportunity Stands Out<ul><li>6–10 years of experience in Oil & Gas EPC/Construction projects.</li><li>Prior experience as an Interface Engineer, Project Engineer, Construction Engineer, or Package Engineer.</li><li>Strong understanding of multidisciplinary engineering: - Mechanical, Electrical, Civil, Instrumentation</li><li>Ability to read and interpret: P&IDs, Isometric drawing, Construction drawings</li><li>Hands-on experience with Primavera P6.</li><li>Experience managing interfaces between Client, Contractor, and Subcontractors.</li><li>Construction phase project experience.</li><li>Knowledge of engineering standards, specifications, and compliance requirements.</li></ul>Soft Skill Must-Haves<ul><li>Strong stakeholder management.</li><li>Excellent communication and coordination skills.</li><li>Decision-making capability.</li><li>Conflict resolution and negotiation skills.</li><li>Ability to manage multiple interface issues simultaneously.</li></ul>Why Apply Through NES? NES is the world’s leading engineering staffing provider, operating across Oil & Gas, Power, Life Sciences, and infrastructure sectors. 80+ offices across 45 countries 24,000+ contractors globally and 10,000+ in the Middle East Strong regional presence and long-term client partnerships With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil & Gas, Power & Renewables, Chemicals, Construction & Infrastructure, Life Sciences, Mining and Manufacturing sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients. </div>

4 - 6 Years Naukri Gulf

Senior Site Management Officer

On-site - Iraq - Iraq 3 August 2026

Engineering

The Site Management Officer is responsible for (Follow up) all aspects of site acquisition, lease negotiations, contract renewals, coordination of security activities. This role involves field-based tasks to ensure site accessibility, security compliance, and operational readiness while maintaining smooth relationships with site owners and resolving site-related issues. Follow up, solve and complete/achieving all tasks in the best way to implement all corporate goals and requirements in a way that reflects positively on the company.. Handle site acquisition processing via internal systems (click-on-site) or other system created by Asia cell. Prepare and upload all required site acquisition documents. Conduct pre-plan and after-plan joint surveys for new and existing sites. Negotiate lease terms and rent with new and existing site owners (private and shared sites). Explain and clarify contract terms and conditions to site owners. Obtain approvals from owners for expansion, upgrades, or co-hosting with Asia cell. Facilitate contract renewals by renegotiating lease terms and ensuring updated agreements are documented and explained. Conduct pre-plan site surveys for new sites, fixing MBTS, and additional infrastructure. Participate in after-plan joint surveys to validate implementation. Handover sites to designated security companies. Coordinate handovers with Deployment and Emergency Response (ER) teams. Prevent and manage site outages and complaints through calls or site visits. Take corrective actions by coordinating with responsible teams post-outage. Serve on the annual trespassing committee for EC. Participate in investigation committees for theft or related incidents. Obtain access permissions through calls and coordination with site owners. Assess sites for outsourcing or insourcing during contract renewals (with or without guards).Desired Candidate Profile<ul><li>Diploma Or Bachelor s degree</li><li>Experience 4-6years</li><li>Computer skill (Word, excel, outlook & Power Point)</li><li>Language skills (Arabic, English) speaking & writing</li><li>Stakeholder Coordination</li><li>Safety & Compliance Awareness</li><li>Ability to Coordinate Site Operational Activities</li><li>Behavioural Competencies: Delivering Results & Fostering Ownership Building Customer Value Networking & Influencing Collaboratively Leading Teams Shaping Strategy Driving Change</li><li>Technical Competencies: Business Case Development Conflict Resolution Fuel Management Problem Solving Negotiation Local Language Knowledge Government Relations Mechanical, Electrical & Plumbing Knowledge</li></ul>

8 - 13 Years Naukri Gulf

Production Supervisor

On-site - Iraq - Basra 16 July 2026

Engineering

<section>Job DescriptionRoles & Responsibilities<div class="paragraph">Under general supervision from the Production Manager, The Production Supervisor works in a multi-discipline Asset Operations Team to develop potentially large and challenging unconventional plays and mature oil and gas fields. Identifies innovative ways to apply HAL technology, service capability and expertise within the context of understanding the reservoir, production and facilities to design new, step-change field exploitation methodologies. Integral member of the multi-discipline Production Team comprised of a reservoir engineer, production geologist and field personnel team. Analyzes production history, well files, production equipment and decline curve analysis and nodal analysis of well performance to estimate remaining recoverable reserves, production and cost of upgrading equipment. Selects and implements production technology, service capability and expertise including completion systems comprised of tubing selection, perforating, sand control and fine migration, matrix stimulation, water control and hydraulic fracturing; artificial lift equipment comprised of sucker-rod lift, gas lift, electrical submersible pumps, subsurface hydraulic pumps, progressing-cavity pumps and plunger lift; real-time surveillance and monitoring systems and waterflooding and other enhanced recovery techniques. Uses decline curve analysis and nodal analysis to identify workovers or recompletions candidates and to select and upgrade production equipment. Focuses on maintaining and increasing daily production through optimizing well performance and field operations while controlling operating costs. Performs daily field operations including optimizing well behavior, production, water disposal, chemical injection and treatment, waterflood performance and artificial lift systems. Evaluates proposed modifications to equipment or to operating procedures to improve safety, efficiency and reliability of equipment and ensures all modifications meet statutory and Company standards. Develops and maintains good working relationships with Production Team through effective communication and teamwork.</div></section><section>Desired Candidate ProfileRequires excellent communication skills and the ability to work closely with geologists, engineers, contractors and asset teams to successfully execute projects from concept to operation; over time, incumbent will become very knowledgeable of HAL technologies and solutions experience together with the exploitation methodologies and technologies that other companies apply. Requires an undergraduate degree and a minimum of eight (8) years of industry experience. Degree in geology or engineering is preferred.</section>

5 - 10 Years Naukri Gulf

Quality Construction Inspector

On-site - Iraq - Iraq Friday

Manufacturing & Production

The Quality Construction Inspector will support the U.S. Department of State contract in Iraq. Under specific direction, the Inspector will apply knowledge and experience of facility systems in the construction and modification of horizontal and vertical applications and support services for LCC department. They will demonstrate knowledge of setting and meeting Key Performance Indicators, to include the verification of compliance metrics in preliminary laydown, during construction phases and then final and acceptance inspections, utilizing the framework Amentum standards, OBO and DoS policies and regulations, local and international construction codes and standards (ICCS). This position will be responsible for providing oversight and collaboration of standards at construction sites, with the monitoring of construction teams, providing oversight in Mechanical, Electrical and Plumbing functions, directing inspections and managing work requirements, utilizing skills and knowledge requiring flexibility, adaptability, and responsiveness. The duties and responsibilities listed below are representative of the nature and level of work assigned and are not necessarily all inclusive.DUTIES:<ul><li>Provide specific support of construction technics and improvements and facilitate verification of products and/or service support applications, recommend training, tools, and methods for sound and safe construction principals.</li><li>Align the quality management function with the performance needs of the product line and/or service support application.</li><li>Manage and maintain project portfolios, adhere to policies and procedures, the basis being ISO 9001:2015 Standard requirements, understand OBO and DoS maintenance practices and policies, and USACE requirements.</li><li>Maintain an audit schedule, and perform audits of procedures, reporting requirements, plans, programs, and keeping records, reviewing cut sheets, horizontal and vertical building codes.</li><li>Conduct site inspection, verification of safety practices and procedures, material deliveries and product / materials standards.</li><li>Record data and analyze performance of material testing, hardness, and slump testing, project change bulletins and change orders.</li><li>Track deficiencies and work with management to define corrective action plans and close out deficiencies, understand CAPA principals and methods.</li><li>Collect and analyze data to determine performance trends on Mechanical, Electrical and Plumping systems and assist in house teams in reparations, oversee ad direct sub-contractors work and products, be aware of new product lines, parts and manufacturing technics.</li><li>Prepare and provide daily, weekly and monthly reports to management, documents progress and compliance by reporting and photographs, must obtain RSO photo badge approval.</li><li>Ensure quality-related training is provided by the Program and sub-contractor employees.</li><li>Implement, maintain Program Instructions, plans, and SOPs. Ensure archives and libraries are reviewed and revised on a planned and scheduled timetable.</li></ul>REQUIRED:<ul><li>Minimum Acceptable Experience Level:</li><li>Five (5) years experience in Quality Assurance/Control in construction projects.</li><li>Five (5) years experience as a Quality Management Professional, supporting a DoD or DOS program.</li><li>At least two (2) years international experience in challenging locations, preferably the Middle East.</li><li>Knowledge, Skills, and Abilities:</li><li>Knowledge of ALL principles and processes involved in Quality Construction Management.</li><li>Ability to collect, analyze, and summarize data and to prepare clear and concise reports.</li><li>Experience in effectively dealing with international and headquarters staff, and sensitivity to other cultures, a basic understanding of local customs and culture and language.</li><li>Exercise sound judgment and make decisions independently and be able to take direction from leadership.</li><li>Ability to work in a fast-paced environment that requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules, at multiple sites and projects.</li><li>Must have excellent people skills, organizational and time management abilities.</li><li>Expert computer skills, specifically in Microsoft Word, PowerPoint, and Excel.</li><li>Ability to become an active and functioning member of a team.</li><li>Ability to be innovative and be an agent for change.</li><li>Education/Certification: Certification of Quality Construction Inspector, or ten (8) years related experience and/or education.</li><li>Licenses and Certifications: ISO 9001:2015 certification. Valid drivers license from Home of Record.</li><li>Security Vetting: Must be able to obtain and maintain a Secret US Government Clearance. Note: US Citizenship is required to obtain a Secret Clearance.</li><li>Language Skills: Satisfactory English proficiency to meet job requirements and to adhere and comply with safety, health, and security measures.</li><li>Medical: Successfully complete and pass the medical and dental examinations as required by Amentum and our customer for deployment to Iraq. Must maintain physical and dental requirements for duration of deployment.</li></ul> Desired Candidate Profile<ul><li>Five (5) years experience in Quality Assurance/Control in construction projects.</li><li>Five (5) years experience as a Quality Management Professional, supporting a DoD or DOS program.</li><li>At least two (2) years international experience in challenging locations, preferably the Middle East.</li><li>Knowledge of ALL principles and processes involved in Quality Construction Management.</li><li>Ability to collect, analyze, and summarize data and to prepare clear and concise reports.</li><li>Experience in effectively dealing with international and headquarters staff, and sensitivity to other cultures, a basic understanding of local customs and culture and language.</li><li>Exercise sound judgment and make decisions independently and be able to take direction from leadership.</li><li>Ability to work in a fast-paced environment that requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules, at multiple sites and projects.</li><li>Must have excellent people skills, organizational and time management abilities.</li><li>Expert computer skills, specifically in Microsoft Word, PowerPoint, and Excel.</li><li>Ability to become an active and functioning member of a team.</li><li>Ability to be innovative and be an agent for change.</li><li>Certification of Quality Construction Inspector, or ten (8) years related experience and/or education.</li><li>ISO 9001:2015 certification.</li><li>Valid drivers license from Home of Record.</li><li>Must be able to obtain and maintain a Secret US Government Clearance. Note: US Citizenship is required to obtain a Secret Clearance.</li><li>Satisfactory English proficiency to meet job requirements and to adhere and comply with safety, health, and security measures.</li><li>Successfully complete and pass the medical and dental examinations as required by Amentum and our customer for deployment to Iraq. Must maintain physical and dental requirements for duration of deployment.</li></ul>

0 to 0 years Naukri Gulf

Translator / Office Administrator II

On-site - Iraq - Iraq 12 June 2026

Human Resources

<section>Job DescriptionRoles & Responsibilities<div class="paragraph">The Administrative Assistant, OMSS position will be based at one of three Amentum sites in Iraq and will serve the Operations and Maintenance Support Services (OMSS) contract in support of the U.S. Department of State. This position will be responsible for the daily reports, weekly due outs, monthly reports, general administration, and will report to the OMSS Site Management. The additional duties and responsibilities listed below are representative of the nature and level of work assigned and are not necessarily all inclusive.DUTIES:<ul><li>Responsible for maintaining a safe workplace and ensuring that safety is the highest priority in the workplace.</li><li>Comply with all Environmental Health & Safety and Quality Assurance requirements and goals. Provide information and materials to these divisions as necessary to ensure adequate and legal documentation.</li><li>Provide a full range of general support services for the OMSS Departments under the direction and supervision of the OMSS Management.</li><li>Perform all administrative and clerical services necessary in support of the OMSS Departments.</li><li>Support the OMSS Departments with a full working knowledge of the Contractor/DoS contract.</li><li>Prepare responses to questions and data requests.</li><li>Record meeting minutes and host meetings as needed.</li><li>Develop historical knowledge of the OMSS contract and read contract requirements and SOPs.</li><li>Develop program support using MS Word, Excel, Access, Project, Outlook, and PowerPoint as necessary in order to facilitate tracking of personnel and project status requirements, data, and reports.</li><li>Translate reports and conversations from Arabic to English and vice versa.</li><li>Perform additional duties and projects as assigned.</li></ul></div></section><section>Desired Candidate Profile<ul><li>Minimum Acceptable Experience Level: Five (5) years experience in an administrative role in a professional office environment.</li><li>Knowledge, Skills, and Abilities: <ul><li>Ability to work in a fast-paced environment that requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules.</li><li>Cross-cultural sensitivity with an international perspective.</li><li>Excellent organizational and time management skills.</li><li>Expert computer skills, specifically in Microsoft Word and Excel.</li><li>Ability to comprehend contractual language, SOPs, and policies.</li><li>Ability to accurately record meeting minutes and communicate via English writing.</li><li>Expert communication skills to facilitate and disseminate information</li></ul></li><li>Education: A high school diploma or GED.</li><li>Licenses and Certifications: None.</li><li>Security Vetting: Must obtain a favorable RSO Certification as required by the position. Must maintain eligibility at the required security level for the duration of the contract.</li><li>Language Skills: Satisfactory English proficiency to meet job requirements and to adhere and comply with safety, health, and security measures.</li><li>Medical: Favorable passage of a drug screen and physical examination.</li></ul>DESIRED:<ul><li>Relevant administrative type experience.</li><li>Previous U.S. embassy experience is highly desirable.</li><li>Experience working with Amentum and U.S. Department of State programs.</li><li>General knowledge of OMSS trades and their general practices (carpentry, custodial, electrical, Housekeeping, etc.).</li></ul>OTHER KNOWLEDGE, SKILLS AND ABILITIES:<ul><li>Knowledge of principles and processes involved in supporting contract responsibilities at a diplomatic facility.</li><li>Experience providing excellent customer services.</li><li>Ability to become an active and functioning member of a team.</li><li>Must have the ability to be innovative and be an agent for change.</li></ul></section>

0 to 0 years Bayt

Lead

On-site - Iraq 23 July 2026

Telecom & Technology

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Title: Construction IT & Telecom Lead "Belong, Connect, Grow, with KBR! The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals. KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets." Job Description: IT &Tele Construction Lead  Company: KBR Iraq Location: Majnoon Oil Field, Iraq, (Rotation Alignment 28/28) Nationality: Iraqi Nationals Preferred The IT & Telecom Lead / Construction Supervisor – Telecommunications is responsible for overseeing all telecommunications construction activities across greenfield and brownfield scopes within the Majnoon Oil Field. The role ensures safe execution, technical integrity, compliance with international standards, and alignment with project cost and schedule objectives. This position provides leadership to telecom technicians and contractors while coordinating closely with Engineering, HSE, Construction, and Contracts & Procurement teams. Accountability / Expectations <ul><li>Ensure full compliance with KBR and project HSE standards across all telecom construction activities.</li><li>Enforce safe work practices related to confined space entry, lifting operations, electrical safety, and cable installation.</li><li>Promote a proactive safety culture through regular inspections, toolbox talks, and risk mitigation planning.</li><li>Telecommunications Construction Oversight</li><li>Supervise installation, configuration, testing, and preservation of telecom systems including:</li></ul><ul><li>Fiber Optic networks</li><li>Structured cabling</li><li>Radio systems</li><li>PAGA</li><li>CCTV</li><li>Access Control Systems (ACS)</li><li>PIDs</li><li>Voice, data, and video networks</li></ul> <ul><li>Review and validate vendor test results for fiber optic and network performance.</li><li>Manage telecom contractors and vendors, ensuring adherence to project specifications and quality requirements.</li><li>Support development of construction strategies for both greenfield and brownfield scopes.</li><li>Work with the Discipline Lead to ensure alignment on scope, quality, cost, and schedule.</li><li>Ensure Engineering and C&P deliverables match construction sequencing and handover milestones.</li><li>Conduct constructability reviews to identify risks, improve productivity, and optimise execution plans.</li><li>Integrate telecom infrastructure into the broader construction plan with minimal operational disruption.</li><li>Provide accurate progress reporting and maintain documentation integrity.</li><li>Identify and resolve technical issues in coordination with Engineering and contractors.</li><li>Ensure telecom systems comply with international standards and project-specific requirements.</li><li>Lead multiple concurrent telecom construction packages, ensuring timely and quality delivery.</li><li>Collaborate with cross-functional teams to understand operational requirements and deliver fit‑for‑purpose telecom solutions.</li><li>Lead and motivate telecom technicians and contractor teams, setting clear objectives and expectations.</li><li>Provide technical guidance, coaching, and performance oversight.</li><li>Communicate effectively with stakeholders, including non‑technical personnel, ensuring clarity of requirements and interfaces.</li><li>Deliver telecom construction activities safely, on schedule, and within budget.</li><li>Maintain strict compliance with project specifications, standards, and HSE requirements.</li><li>Ensure quality of installation, testing, and commissioning activities.</li><li>Drive productivity improvements and resource‑based planning (Level 4 Scheduling).</li><li>Maintain strong coordination between contractors, engineering, and client representatives.</li><li>Ensure seamless integration of telecom systems into operational infrastructure.</li></ul> Education Bachelor’s degree in Telecommunications, Electrical Engineering, or related discipline. Experience 10+ years of experience in oil & gas telecommunications systems. 5–10 years of construction supervision experience. <ul><li>Strong background in fiber optics, structured cabling, radio communication, CCTV, SCADA, and PAGA systems.</li><li>Experience in remote, challenging environments and both brownfield and greenfield projects.</li><li>Knowledge of international telecom standards and oil & gas HSE regulations.</li><li>Strong leadership and team‑building capability.</li><li>Proven experience in productivity measurement and resource‑based planning.</li><li>Excellent communication and coordination skills.</li><li>Ability to manage multiple projects simultaneously.</li></ul> </div>

7 - 12 Years Naukri Gulf

Generator Technician

On-site - Iraq - Iraq Yesterday

Research & Development

EPP III, Generator (3 - 150KW) and HVAC Technician SWA (Bahrain, UAE, Saudia Arabia, Kuwait, Jordan, Iraq) Perform troubleshooting, diagnostics, maintenance, and services on all types of military and commercial generators and HVAC systems used by the U.S. Army to include the 150kW EPP III generators.MEANINGFUL WORK AND PERSONAL IMPACT As a Generator and HVAC Mechanic, the work you ll do at GDIT will be impactful to the mission of the Worldwide Field Support contract for the U.S. Army. You ll play a crucial role in providing on-site technical and maintenance assistance, analyzing complex technical problems, and providing training to site operations and maintenance personnel.Perform maintenance and sustainment support on 3kW to 150kW, 500 0hz generators involving installation and removal of generators from fixed and mobile locations, troubleshoots and repair alternating current (AC) systems, direct current (DC) systems, electronic control systems and other program logic controls, electrical wiring and accessories. Troubleshoot and repair HVAC, Chillers, and Environmental Control Units some are standalone units and others are mounted on trailers and vehicles. Maintain all types of commercial power generation equipment; military spec generators and Uninterrupted Power Systems (UPS). Operate a Load bank during testing Fabricate wire harnesses and solder terminals. Some work will be in a generator shop environment, and some work will be in a field environment. Other duties as assigned.WHAT YOU LL NEED TO SUCCEED Bring your Generator and HVAC expertise along with a drive for innovation to GDIT.Other duties as assigned.Desired Candidate ProfileThe Generator and HVAC Mechanic must have:Education: High School diplomaExperience: BA/BS plus 2 years experience, AA/AS/plus 4 years experience, or a High School diploma and 7 years experienceTechnical skills: Extensive diesel generator experience. Knowledge of generator parallel systems and switch gear. Experience with brazing copper tubing and evacuating and recharging refrigerant.Security Clearance: SecretTravel to Bahrain, UAE, Saudia Arabia, Kuwait, Jordan, IraqRole requirements: US passport must not expire for at least 2 years, valid US driver s license, and an international driver s permit (AAA)Skills Generator Repair HVAC Repair/Troubleshooting Generator Troubleshooting Power Generation Certifications Section 608 Technician Certification EPA is a plusMust meet CRC fitness standards for deployment to SWA (southwest Asia) and maintain those standards annually while on contract in SWA.

Electrical Drafts Man Jobs in Iraq

Mechanical Installation Lead Hand

Site Supervisor

Quality Controller

HSE Engineer

Aerostat Operator I

Aerostat Operator I

Operator

Deployment Engineer

Site Management Technician

Aerostat Operator I

Aerostat Operator

Senior TAR Supervisor E&I

Reporting Engineer

Project Interface Engineer

Senior Site Management Officer

Production Supervisor

Quality Construction Inspector

Translator / Office Administrator II

Lead

Generator Technician

Site Owners

Employers

Job Seekers

Electrical Drafts Man Jobs in Iraq

Receive email alerts for Electrical Drafts Man Jobs in Iraq jobs