Female Nurse Jobs in Iraq

<p>With general autonomy, has overarching responsibility for investment performance and operations pertaining to Halliburton’s equity and/or commercial ownership in Oil and Gas properties. The Sr. Asset Manager has direct oversight of one or more long term field development projects or a region as well as ultimate accountability for IAM’s performance. Directs and manages the Asset teams, consisting of Asset Operations and teams of geoscience and engineering professionals, who are responsible for managing and developing the field. Major responsibilities include: optimization of existing asset NPV through prudent decisions for continuing operations, investment, development, and technological improvements; acquisition of new Oil and Gas Assets entailing opportunity identification, scoping, technical evaluation, commercialization, drilling, and development to earn either equity or commercial ownership (with specific preference for external funding arrangements and maximized Halliburton PSL content); accountability to Halliburton Executive Management for planning, budget oversight, and P&amp;L performance of Oil and Gas Assets with special emphasis on ethical, safety, environmental and business compliance with Halliburton policies/standards.</p><p><strong>Desired Candidate Profile</strong></p><p>Requires an undergraduate degree in Petroleum Engineering or Geoscience and a minimum of 20 years of relevant industry experience which includes Oil and Gas deal structuring/negotiation, commercialization, Oil and Gas Accounting practices, onshore and offshore asset management, reservoir / production engineering, well construction, re-completions / workovers, geoscience interpretation, and leading/directing/mentoring technical and non-technical senior managers (professionals with middle management oversight). Superior presentation skills, project management training, and experience working in unconventional plays and offshore shelf areas is required. A strong knowledge of all relevant oil and gas technical disciplines in addition to specific knowledge of certain advanced interpretation and/or engineering methods is required. Halliburton is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation .</p>

<p>Under direct supervision from the Production Supervisor: The Production Tech specializes in working in office, field, or laboratory recording and analyzing data and writing reports. Fieldwork includes assisting geologists and engineers with electronic, sonic, or nuclear measuring instruments that indicate the potential for oil and gas; gathering and analyzing well and production data; assisting in well optimization and well failure analysis and preparing monthly performance reports for each producing well. Office work includes reporting Key Performance Indicators (KPI) for production, new completes, recompletes and workovers and preparing Weekly Production Report and Up/Down Reports; Weekly Activity Report operations and Flowback Reports for new completes and recompletes. Laboratory work includes assisting geologists and engineers with electronic, sonic, or nuclear measuring instruments that indicate the potential for oil and gas; collecting formation, mud and soil samples and preparing the samples for laboratory analysis; conducting scientific tests on samples to determine content and characteristics; recording data from tests and compiling information from reports, computer databases and other sources; recording data such as well temperatures, pressures, flow rates and watercut and comparing actual productivity to estimates.</p><p><strong>Desired Candidate Profile</strong></p>Requires a high school diploma or equivalent. Undergraduate degree preferred. Requires a minimum 3 years' experience in production operations which includes experience in oil &amp; gas operations. Strong computer skills, particularly with Microsoft software such as Excel, Word, PowerPoint and Outlook are preferable Minimum Qualifications: Minimum qualifications may be acquired through technical schools or equivalent related experience. Candidates having qualifications that exceed the minimum job requirements will receive consideration for higher level roles given (1) their experience, (2) additional job requirements, and/or (3) business needs. Depending on education, experience, and skill level, a variety of job opportunities might be available, including Production Technologist, Production Supervisor, and Production Manager. Halliburton is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation .

<p>The Instrumentation &amp; Controls Technician, having completed level two competencies, disassembles, inspects, cleans, repairs, calibrates, tests, and performs periodic maintenance of field instruments, equipment systems and controls. Evaluates and determines necessary modification, performs complex repairs or removal of instruments or devices needing overhaul during scheduled maintenance, troubleshooting while performing unscheduled work.</p><p><strong>Essential Duties &amp; Responsibilities:</strong></p><ul><li>Record and report abnormal function or out of tolerance conditions of equipment and initiate corrective action and documentation</li><li>Provide documents daily record of inspection, maintenance activity, repair and other work performed within approved guidelines and procedures.</li><li>Reinstall, test, evaluate, calibrate, and maintain instruments or devices upon completion of repairs.</li><li>Communicate with customer staff in the calibration, repair and operation of equipment as necessary.</li><li>Perform work in accordance with approved equipment, calibration, maintenance and safety procedures.</li><li>Ability and willingness to work holidays, weekends and overtime as required by field assignments</li><li>Travel extensively (internationally and domestically)</li><li>May be assigned other duties to help proactively drive our FieldCore vision and align with our organization s core values.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Two-year degree, scientific field of study preferred or equivalent related work experience. Basic English language skills are required. 1-3 years of experience in instrumentation, controls, installing, calibrating, maintaining and repairing equipment or equivalent experience. Must have appropriate license or certification where required by federal, state or local laws English proficiency required</p><p><strong>Desired Characteristics:</strong></p><ul><li>Qualified level. Able to successfully perform all requirements of the job properly.</li><li>Possess advanced skills and applies the fundamental concepts, practices and procedures of a particular field of specialization.</li><li>Demonstrated use and understanding of physical standards of mass, temperature flow and pressure.</li><li>Working knowledge of computers.</li><li>Ability to read and work from blueprints, schematic diagrams and specification manuals.</li><li>Team player committed to working in a quality environment</li><li>Working knowledge of computers/PLC's</li><li>Excellent customer, communication, and interpersonal skills</li><li>Ability to work independently</li><li>Ability to complete multiple projects within time constraints</li><li>Strong organizational skills</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Under the supervision of the Fire Chief, the Deputy Fire Chief responsible for Fire Station daily operations to ensure personnel are well-trained and capable to perform their duties effectively and on short notice. Select and guide firefighters to perform as expected when called upon and will continually assess their readiness and performance. This assessment will maintain daily awareness of fire inspections, fire services, inspection and testing of fire protection and alarm systems, firefighter training, and fire drills.</p><p>Manage installation FES to include maintaining operating instructions, Master Plan, Standards of Coverage, manpower, equipment and supplies. Develop and implement plans to cover for reduced operational capabilities; response, staffing, pollution prevention, safety of personnel, operational risk Manage compliance self-inspection program IAW Army Installation Command checklist ensuring requirements contained in Amy Regulation 420-1. Performance Work Statement, DoDI 6055.6 are continually maintained. Manage and participate in the development and implementation of goals, objectives, policies, and priorities for assigned programs; recommend and administer policies and procedures; oversee and participate in the development of new fire ordinances. Provide 24/7 FES to the installation. Services include on-scene incident management, aircraft rescue and firefighting, structural firefighting, response to hazardous materials, technical rescue to include auto extrication and confined space rescue and emergency medical services support. Monitor and evaluate the efficiency and effectiveness of service delivery methods and procedures; recommend, within company policy, appropriate service and staffing levels. Plan, direct, coordinate, and review the work plan for fire service staff; assign work activities, projects, and programs; review and evaluate work products, methods, and procedures. Meet with staff to identify and resolve problems. Select, train, motivate, and evaluate fire service personnel. Provide or coordinate staff training. Work with employees to correct deficiencies. Implement discipline and termination procedures. Ensure that equipment, safety clothing, apparatus, and supplies are specified, purchased, received, distributed in an effective and consistent Performs Job Duties as assigned.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><h2>Qualifications</h2><p>Minimum Qualifications:</p><p>Education/Certifications: One year related experience may be substituted for one year of education, if degree is required. An Associate s or higher degree in fire technology (Preferred)</p><p>Must be a U.S Citizen</p><p>Active or ability to obtain a Secret Clearance</p><p>Must be CAC eligible and/or able to obtain a Common Access Card (CAC)</p><p>Licenses/Certifications: Fire Officer IV, Fire Instructor II, Fire Instructor III, Fire Inspector II; HAZMAT Incident Commander, Airport Fire Fighter certifications required</p><p>Must meet training and certification requirements outlined in DOD 6055.06</p><p>Required to have IFSAC or ProBoard certification</p><p>Experience: Ten years fire protection experience</p><p>Five years supervisory experience in related position</p><p>Supervisory/ Budget Responsibilities: Review programs of the Assistant Fire Chief of Operations/Training. Respond and direct F&amp;ES personnel at emergencies. Manages large department with multiple fire stations geographically dispersed and large number of personnel. Manages significant annual budget and also vehicle replacement programming and facility improvement planning.</p><p>Skills: Must have experience directing firefighting operations to include fighting aircraft and structural fires, performing rescue services, and responding to hazardous materials incidents, medical emergencies, and confined space rescues. Knowledge of the chemistry of fire, preventive maintenance and operations of firefighting and rescue equipment, physical and chemical properties of combustible materials and building structures and their component systems. Experienced in managing fire prevention and protection plans and programs. Previous knowledge to act for the Fire Chief during his absence. Assumes complete charge of operations in absence of Fire Chief at crashes, fires, emergency situations, and at other times. Directs activities and personnel, transmitting instructions to Assistant Chiefs on the scene or other personnel as to the procedures to be followed contingent on complexity of the incident type. Must also have experience at management of self-inspection and compliance measurement programs</p><p>Working Conditions: Must be capable of working in an extreme weather conditions with temperatures exceeding 120 degrees Fahrenheit. Indoor and/or outdoor environment with very adverse and harsh conditions (i.e., hot, dry, duty, desert environment with average temperatures of 30 degrees in the winter and 130 degrees in the summer months). Includes some industrial production environment conditions as well. Work is performed in a standard office with frequent travel to various locations to attend meetings and/or perform Department activities in responding to emergency scenes, disasters, or critical incidents; the employee occasionally works near moving mechanical parts; occasionally exposed to outside weather conditions and wet and/or humid conditions; occasionally works in high, precarious places; occasionally exposed to fumes or airborne particles, toxic or caustic chemicals, extreme heat, risk of electrical shock, risk of radiation, and vibration; the noise level in the work environment is usually moderate; however, the noise level is occasionally very loud due to sirens, etc., wear protective apparel including goggles, face protector, aprons, safety shoes, and self-contained breathing apparatus; incumbents may be required to work extended hours including evenings and weekends.</p><p>Physical Requirements: Light work. Exerting up to 20 pounds of force occasionally, and/or up to 10 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects. Work may require heavy lifting, stooping, climbing, prolonged standing, prolonged sitting, and working with or in areas where a potential could exist for exposure to physical, chemical, or biological agents. Employee use of personal protective equipment (PPE) is required for some situations. PPE includes, but is not limited to, head, foot, torso, respiratory, vision, and hearing protective devices. Must comply with all Fire and Safety Regulations and post policies.</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $3.9B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. Responsibilities The F-16 Engine Mechanic is responsible for   Oversight/Training/Instructing  the host nation on the inspection, maintenance, and repair of F-16 aircraft engines, with a strong focus on ensuring the engine’s optimal performance, reliability, and safety. This role requires in-depth knowledge of turbine engines, especially Pratt &amp; Whitney or General Electric engines commonly used in F-16 aircraft . Working in close collaboration with other maintenance team members, the technician  oversees  both routine and complex tasks, diagnosing issues and implementing repairs that meet strict military and safety standards. Attention to detail, adherence to technical manuals, and commitment to quality assurance are critical to success in this role. Essential Duties and Responsibilities for Oversight/Training/Instructing host nation in the following: • Routine and non-routine inspections of F-16 aircraft engines, identifying issues or areas requiring attention. • Scheduled maintenance, including troubleshooting, removing, and installing engine components. • Utilizing advanced diagnostic equipment to assess engine conditions and analyze engine performance. • Repairing and replacing worn or damaged components, such as turbine blades, bearings, and seals, ensuring compliance with technical specifications. • Maintaining detailed records of work performed, including inspection and maintenance logs, and report findings to ensure accurate documentation. • Adhering to all safety protocols and technical manuals during maintenance procedures to ensure personnel safety and equipment functionality. • Collaborating with other technicians and engineers to discuss solutions for complex mechanical or technical issues. • Staying up-to-date on F-16 engine technologies, tools, and best practices by participating in ongoing training and professional development. • Supporting pre- and post-flight engine checks, ensuring engine readiness and addressing last-minute maintenance needs. Work Conditions Position is located OCONUS and in an austere environment; work is being performed on the flight line, limited hangar or aviation field environment. Physical Requirements • Must be able to lift and parts, tooling and other awkward items sometimes weighing greater than 50 lbs , including up and down stairs. • Requires intermittent standing, walking, sitting, squatting, stretching, and bending throughout the workday. • Must be able to see and hear, or use prosthetics that will enable these senses to function adequately to assure that the requirements of this position can be fully met. Qualifications Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required . • Must be able to obtain and maintain a US Secret security clearance. • In order to obtain a secret clearance, qualified candidates must have US Citizenship. • Ability to pass physical screening requirements. Education and/or Experience: • High school diploma or equivalent; an Associate’s or technical degree in aircraft maintenance or a related field is preferred. • Minimum of 8-10 years of experience working with military turbine engines, ideally on F-16 engines. • Extensive hands-on experience with Pratt &amp; Whitney or General Electric engines for the F-16 aircraft . • Proficiency in using diagnostic tools, maintenance software, and technical manuals for turbine engines. • Ability to work in a fast-paced environment, meet deadlines, and adapt to changing priorities. • Strong understanding of safety standards and procedures for working with military aircraft . • Certification through a relevant military or civilian aviation authority (e.g., FAA, A&amp;P) is highly desirable. • USAF 7 – Level skill or equivalent. What We Bring + + At V2X, we strive to be market competitive in our total reward offerings. + The successful candidate’s starting pay will be based on, but not limited to, their job-related skills, experience, qualifications, work location, and market conditions. + Please speak with a recruiter for additional information. + Employee benefits include the following: + Healthcare coverage + Retirement plan + Life insurance, AD&amp;D, and disability benefits + Wellness programs + Paid time off, including holidays + Learning and Development resources + Employee assistance resources + Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients</p> </div>

<p>Operate front-end loaders safely and efficiently. Load trucks, hoppers, conveyors, and storage areas with materials such as sand, gravel, soil, aggregates, ore, or other bulk materials. Transport materials within the worksite while minimizing spillage and equipment wear. Perform excavation, stockpiling, backfilling, and site cleanup as required. Conduct pre-start and post-operation inspections of equipment. Monitor and report equipment defects, malfunctions, or maintenance requirements. Perform routine preventive maintenance, including checking fluid levels, tires, hydraulic systems, and lubrication points. Follow site traffic management plans and all health, safety, and environmental (HSE) procedures.</p><p><strong>Desired Candidate Profile</strong></p><p>High school diploma or equivalent (preferred). Valid heavy equipment operator certification or license, where required. Minimum 2 3 years of experience operating front-end loaders or similar heavy equipment.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br><br><br><br>Head of IT <br><br><br><br>? Sulaymaniyah, Kurdistan Region<br> ? Permanent | Full-Time<br>Salary: $4,000-$5,000/month<br>Benefits: Accommodation, transport, family medical, schooling support, annual flights, bonus<br><br>A large and well-established group of companies is seeking an experienced and commercially minded ICT Manager to lead its technology operations and digital transformation initiatives across multiple business sectors.<br><br>This is a key leadership role responsible for driving ICT strategy, strengthening infrastructure and security, and supporting the group's ongoing digital transformation journey.<br><br>Key Responsibilities<br><br><br>Lead and manage the group-wide ICT function across a diverse business portfolio of approximately 2,000 employeesOversee ICT infrastructure, enterprise applications, cybersecurity, networks, and systems operationsSupport and enhance the existing SAP environment and wider digital transformation initiativesDevelop ICT policies, governance, and operational best practicesManage, mentor, and grow the local ICT team, including succession planning and capability developmentEnsure stable, secure, and scalable technology solutions aligned with business growth objectivesPartner closely with business leaders across multiple operating companies<br><br><br>We are looking for a hands-on technology leader with a strong balance of operational expertise and strategic vision.<br><br>Requirements<br><br><br>Proven experience leading ICT functions within large, diversified groups or conglomeratesStrong technical background across infrastructure, systems, cybersecurity, and/or ERP platforms such as SAPExperience working within sectors such as:<br>HealthcareReal EstateEducationConstructionIndustrial or Steel manufacturing<br>Demonstrated ability to lead teams and drive business-focused technology transformationPrevious exposure to international and family-owned business environments is highly desirableFluent English communication skills are essentialArabic or Indian nationality backgrounds would be advantageous <br><br><br><br> <br><br>Let op: vacaturefraude<br><br>Helaas komt vacaturefraude steeds vaker voor. We waarschuwen je voor mogelijke misleiding:<br>* Wij zullen nooit via WhatsApp of in een videogesprek vragen om jouw persoonlijke gegevens (zoals een kopie van je ID, bankgegevens of BSN).<br>* Twijfel je over de echtheid van een vacature of contactpersoon? Neem dan altijd rechtstreeks contact met ons op via de officiële contactgegevens op onze website.<br> <br>Important: job fraud<br> <br>Unfortunately, job fraud is becoming more common. Beware of such scams:<br>* We will never ask for personal information (such as a copy of your ID, bank details, or social security number) via WhatsApp or during a video call.<br>* If you're unsure whether a vacancy or contact person is legitimate, please reach out to us directly using the official contact details on our website.<br> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills">ICT, IT manager, digital transformation <br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Senior Program Manager is responsible for managing and implementing the Amideast Iraq Field Office s portfolio of scholarship and exchange programs. The portfolio includes degree-granting scholarships and short-term educational programs funded by U.S. Government agencies, as well as programs supported by other donor partners. The Senior Program Manager oversees the design, planning, budgeting, implementation, monitoring, and evaluation of these programs. Core activities include preparing implementation plans, managing recruitment processes, developing program announcements, delivering presentations to stakeholders and applicants, screening applications, participating in interview panels as required, and ensuring timely and accurate reporting. The Senior Program Manager also leads the development and expansion of the program portfolio, including drafting and managing grants and cooperative agreements with donor partners. In coordination with the Country Director, the role supports business development efforts and generates new funding opportunities. This includes leading the preparation of technical and cost proposals for U.S. Government agencies and other donors and developing associated budgets. The Senior Program Manager leads fee-for-service growth efforts across Iraq through market analysis and targeted outreach. The Senior Program Manager reports to the Country Director.</p><p>RESPONSIBILITIES</p><p>Project Management</p><ul><li>Manage the full project lifecycle, including planning, budgeting, implementation, monitoring and evaluation, reporting, and closeout.</li><li>Ensure compliance with donor regulations, Amideast policies, and budget requirements, including forecasting and financial oversight.</li><li>Lead the development of technical and cost proposals for U.S. Government agencies and other donor partners, in coordination with the Country Director and Amideast headquarters.</li><li>Manage assigned staff, including setting priorities, providing regular feedback, holding staff accountable for performance and deliverables, and ensuring compliance with Amideast policies and codes of conduct.</li></ul><p>Scholarship and Exchange Programs</p><ul><li>Oversee scholarship and exchange programs, including outreach, application support, advising, visa coordination, and pre-departure orientations.</li><li>Coordinate with the U.S. Embassy and Consulate and Amideast headquarters on program design, implementation, reporting, and compliance.</li><li>Conduct outreach visits to universities, NGOs, and businesses across Erbil and other areas of Iraq to promote exchange opportunities.</li><li>Maintain program databases, draft required reports, and ensure reporting deadlines are met.</li></ul><p>Business Development and Fee-for-Service Growth</p><ul><li>Lead strategies to expand Amideast s fee-for-service offerings, including TOEIC testing, PMP training, specialized English courses, and workforce development programs across Iraq.</li><li>Conduct market surveys, stakeholder mapping, and outreach campaigns to identify new clients and partners.</li><li>Collaborate with government ministries, universities, corporations, and NGOs to tailor Amideast products and services to client needs.</li><li>Support the Country Director in negotiating partnership agreements and developing proposals for new fee-for-service initiatives.</li></ul><p>Administrative Duties and Reporting</p><ul><li>Prepare quarterly and final program reports for the Country Director and headquarters.</li><li>Oversee program-related administrative tasks.</li><li>Support all priorities and initiatives assigned by the Country Director.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor's degree in education, international development, public administration, business, management, or a related discipline.</li><li>Minimum of 10 years of progressively responsible experience in program or project management, consulting, education services, or a related field, with substantial experience in Iraq and/or the Kurdistan Region of Iraq.</li><li>At least seven years of supervisory or managerial experience, with a proven ability to lead teams, set priorities, and ensure accountability for performance and deliverables.</li><li>Experience with project monitoring, evaluation, and performance reporting, including tracking indicators, outputs, and results.</li><li>Strong financial management skills, including experience overseeing program or project budgets and working closely with finance and compliance teams.</li><li>Advanced proficiency in Microsoft Excel for financial analysis, budget management, tracking, and reporting.</li><li>Excellent written and spoken English, with the ability to produce clear, well-structured reports, proposals, and professional correspondence for donors, institutional partners, and corporate clients.</li><li>Professional proficiency in written and spoken Sorani.</li><li>Professional proficiency in spoken Arabic.</li><li>Strong organizational, analytical, and problem-solving skills, with the ability to manage multiple priorities and deadlines in a fast-paced, results-oriented environment.</li><li>Ability to communicate effectively with diverse stakeholders, including government counterparts, donors, headquarters staff, institutional partners, and private-sector clients.</li><li>Demonstrated experience leading the development of technical and cost proposals for U.S. Government agencies and other international donors.</li><li>Prior experience managing or supporting grants and cooperative agreements funded by U.S. Government or other bilateral or multilateral donors.</li><li>Experience working with or within an international nonprofit or development organization.</li><li>Familiarity with education, workforce development, or exchange programs.</li><li>Experience working in complex or fragile operating environments.</li><li>Professional proficiency in written Arabic.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are seeking a highly experienced Senior Accountant to join our team in Baghdad, Iraq, and support the financial management of the company across its construction, engineering, and contracting operations.</p><p>Location: Baghdad, Iraq (On-Site Position)</p><p>Key Responsibilities:</p><ul><li>Manage and oversee day-to-day accounting operations</li><li>Maintain accurate accounting records and general ledger entries</li><li>Prepare financial statements, management reports, and periodic financial reports</li><li>Monitor accounts receivable and payable</li><li>Follow up with clients regarding payments and outstanding invoices</li><li>Monitor cash flow, payment schedules, and collections</li><li>Prepare and issue invoices, receipts, and payment certificates</li><li>Maintain project-based financial records and cost tracking</li><li>Assist in budgeting, cost control, and financial analysis</li><li>Follow up with suppliers regarding invoices, payments, contracts, and supporting documentation</li><li>Coordinate with procurement, HR, administration, and project teams on financial matters</li><li>Assist in month-end and year-end closing activities</li><li>Ensure compliance with company policies, accounting standards, and applicable regulations</li><li>Support management with financial planning and decision-making</li></ul><p>Requirements:</p><ul><li>Bachelor's Degree in Accounting, Finance, or a related field</li><li>Minimum 7 years of relevant accounting experience</li><li>Strong proficiency in Microsoft Excel and accounting software (Odoo experience is an advantage)</li><li>Strong knowledge of accounting principles, financial reporting, and cost control</li><li>Experience in construction, engineering, or contracting companies</li><li>Strong analytical, organizational, and problem-solving skills</li><li>Excellent communication and follow-up abilities</li><li>Ability to work independently and manage multiple priorities</li></ul><p>Preferred:</p><ul><li>Experience with project-based accounting and cost tracking</li><li>Experience working in Iraq or the Middle East region</li><li>Familiarity with ERP systems and financial controls</li><li>Iraqi nationals are preferred</li></ul><p>Employment Type: Full-Time</p><p>Work Location: Baghdad, Iraq</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor's Degree in Accounting, Finance, or a related field</li><li>Minimum 7 years of relevant accounting experience</li><li>Strong proficiency in Microsoft Excel and accounting software (Odoo experience is an advantage)</li><li>Strong knowledge of accounting principles, financial reporting, and cost control</li><li>Experience in construction, engineering, or contracting companies</li><li>Strong analytical, organizational, and problem-solving skills</li><li>Excellent communication and follow-up abilities</li><li>Ability to work independently and manage multiple priorities</li><li>Experience with project-based accounting and cost tracking</li><li>Experience working in Iraq or the Middle East region</li><li>Familiarity with ERP systems and financial controls</li><li>Iraqi nationals are preferred</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><strong>Overview</strong> <br> <br> ***This position will be physically located in Iraq in support of LOGCAP.*** <p>Under supervision of the Waste Services Manager, the Waste Management Supervisor supervises and coordinates all activities of a Non-Hazardous Waste Management Operation which includes wastewater treatment plant operations and black and gray water collection and disposal. The Supervisors oversees all personnel engaged in operation, maintenance, and repair of all Sewage and Black Water Waste Management activities at a 24 / 7 facility.</p> <br> <strong>Responsibilities</strong> <br> <br> <p> <em>This position description is subject to change at any time as needed to meet the requirements of the program or company.</em> </p> <ul> <li>Directs activities of workers engaged in tasks such as black and gray water collection, and dust abatement.</li> <li>Assists workers in repairing facilities and equipment, applying general knowledge of wastewater collection and disposal safety procedures, and using hand tools.</li> <li>Maintains personnel records.</li> <li>Trains workers in performance of duties and safety procedures.</li> <li>Inspects facilities and other equipment to detect need for maintenance and repair.</li> <li>Performs other duties as described.</li> </ul> <br> <strong>Qualifications</strong> <br> <br> <ul> <li> <strong>Minimum Qualifications: Education/Certifications:</strong> One year related experience may be substituted for one year of education, if degree is required.<br> <ul> <li>Must be a U.S. Citizen</li> <li>High school diploma or equivalent required. Undergraduate degree preferred.</li> <li>Must obtain or have equivalent Waste-Water Treatment Certificate, Certification and/or License</li> </ul> </li> <li> <strong>Experience:</strong> <ul> <li>Five (5) years related experience in Municipal Waste Management working at a Sewer Treatment facility.</li> </ul> </li> <li> <strong>Additional requirements:</strong> <ul> <li>Strong organization, communication (verbal/written) skills, and attention to detail.</li> <li>Requires extensive knowledge of Microsoft Office (Word, Visio, PowerPoint, Outlook, and Excel).</li> <li>Prior LOGCAP experience at a Foreman or Lead level in Non-Hazardous Solid Waste Management (Sewage and Black Water Waste Operations)</li> </ul> </li> <li> <strong>Skills</strong> <ul> <li>Strong organization, communication (verbal/written) skills, and attention to detail.</li> <li>Requires extensive knowledge of Microsoft Office (Word, Visio, PowerPoint, Outlook, and Excel).</li> <li>Prior LOGCAP experience at a Foreman or Lead level in Non-Hazardous Solid Waste Management (Black Water Waste Operations).</li> </ul> </li> <li> <strong>Supervisory Responsibilities</strong> <ul> <li>Supervises operations of Waste Management employees and activities</li> </ul> </li> <li> <strong>Working Conditions:</strong> <ul> <li>Must be capable of working in an extreme weather conditions with temperatures exceeding 120 degrees Fahrenheit. Indoor and/or outdoor environment with very adverse and harsh conditions (i.e., hot, dry, dusty, desert environment with average temperatures of 30 degrees in the winter and 130 degrees in the summer months).</li> <li>Includes some industrial production environment conditions as well.</li> </ul> </li> <li> <strong>Physical Requirements:</strong> <ul> <li>Medium work. Exerting up to 50 pounds of force occasionally, and/or up to 30 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects.</li> <li>Work may require heavy lifting, stooping, climbing, prolonged standing, prolonged sitting, and working with or in areas where a potential could exist for exposure to physical, chemical, or biological agents. Employee use of personal protective equipment (PPE) is required for some situations. PPE includes, but is not limited to, head, foot, torso, respiratory, vision, and hearing protective devices. Must comply with all Fire and Safety Regulations and post policies.</li> </ul> </li> </ul> At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</div></section>

<p><h4>Essential responsibilities:</h4> <p>Aerostat operators/user-level maintainers will participate in the overall, hands-on operation of the aerostat system including launch, in-flight, recovery, and moored activities.</p> <p>Candidates will perform all functions to operate the PGSS/PTDS, an aerostat mounted intelligence, surveillance, and reconnaissance (ISR) platform, its mobile mooring platform (MMP), sensor payload(s), communications and navigation systems as well as associated support equipment (boom lift, forklift, all terrain vehicles (ATVs), and electrical power generators).</p> <p>Candidate will perform user-level maintenance functions including performing hands-on preventative maintenance checks and services (PMCS), troubleshooting, removing and replacing line replaceable units (LRUs), and removing and replacing payloads.</p> <p>Candidate must possess a diverse range of skills with the ability to quickly adapt to new situations. Tasks will be performed under direction of higher classified technicians and/or site personnel.</p> <h4>Minimum requirements:</h4> <ul> <li>High school diploma or equivalent is required.</li> <li>Two-year associate’s degree in a technical field from an accredited college can substitute for work experience.</li> <li>Must have an active secret US government clearance or the ability to obtain a secret clearance. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must have a valid U.S. passport with a minimum of one year remaining.</li> <li>Must have valid US driver’s license.</li> <li>Knowledge of and experience in the operations of hardware systems and components.</li> <li>Experience in fault detection, isolation, and correction of hardware systems and individual components.</li> <li>Ability to perform routine system maintenance and analysis functions including: hardware configurations; adding, removing and replacing hardware components; use of hardware and software diagnostic testing tools; reading of electronic circuit schematics; and repairing printed circuit boards.</li> <li>At least one (1) year previous aerostat experience OR two (2) years of experience in the following areas may be substituted in lieu of aerostat experience:</li> </ul> <p><strong>1) Electrical maintenance mechanic</strong></p> <ul> <li>Possess at least two (2) years aerostat experience as an operator at the 20 series level or greater from Army MOS 35F (Intelligence Analyst), 35G (Geospatial Intelligence Imagery Analyst), 35H (Common Ground System Analyst), 96R (Ground Surveillance Systems Operator), 96U (Unmanned Aerial Vehicle Operator), or military branch equivalent.</li> <li>Two years of hands-on experience in performing operations and maintenance tasks either on an aerostat system or a related industry/military equivalent is required.</li> <li>Must be qualified at the 10 series or greater level (via military or civilian technical schools) is required.</li> <li>Ability to read electronic schematics.</li> <li>O&M of electro-mechanical equipment to include one or more of the following: <ul> <li>Hydraulic/servo valves</li> <li>Hydraulic actuators, control systems</li> <li>Test and diagnostic equipment</li> </ul> </li> </ul> <p><strong>2) Networking, IT & information systems</strong></p> <ul> <li>Two years’ experience is required.</li> <li>Must be qualified at the 10 series or greater level; MOS 25B/F or other military branch equivalent or industry occupational specialties as a CISCO Network Administrator; Army MOS 25L/N or other military branch equivalent or industry occupational specialties as a Network Installation (BICSI or Network + or Comp T Certification) will be considered.</li> <li>CCIE certification with fiber optic certification is preferred.</li> </ul> <p><strong>3) Mechanical maintenance</strong></p> <ul> <li>Mechanical maintenance with qualifications at the 10 series or greater from U.S. Army MOS 94D/X and 91/B/S/W or other military branch equivalent, or industry occupational specialties such as National Institute for Automotive Service Excellence (ASE) Certified Truck Mechanic or Federal Aviation Administration (FAA) General Mechanic 1 or greater.</li> <li>Two years of hands-on experience on an aerostat system or a related industry/military equivalent is required.</li> <li>O&M of mechanical equipment to include one or more of the following: hydraulic systems, winch systems, tether/cable handling systems, industrial generator sets, power switch gear, HVAC, cranes aerial lift, forklift, industrial generator sets.</li> </ul> <h4>Physical requirements:</h4> <ul> <li>Requires the ability to regularly lift up to 50 lbs.</li> <li>Requires the ability to regularly climb extension ladders, roof ladder, stepladders, and stairs at least 10 times during shift.</li> <li>Requires the flexibility to bend/stoop, squat repetitive during shift.</li> <li>Requires the ability to regularly kneel repetitive for shift.</li> <li>Requires the ability to move in a 90-degree fashion on a repetitive basis for shift.</li> <li>Requires the ability to stretch/reach on a repetitive basis for shift.</li> <li>Requires the ability to walk extensively throughout the plant during shift.</li> <li>Requires the ability to interact with all clients in a professional and friendly manner despite periods of stress.</li> </ul> <h4>Medical requirements:</h4> <p>Successfully complete and pass the medical and dental examinations as required by the employer and customer for deployment to Iraq.</p> <p>Must maintain physical and dental requirements for the duration of the deployment.</p> <h4>Working and living conditions:</h4> <p>This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environment. Temperatures can reach 120-130 degrees Fahrenheit/50-55 degrees Celsius during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to CENTCOM, EUCOM, and AFRICOM for extended periods. Work schedules are a minimum of 6 days per week and 10 hours per day, while some jobs have higher daily and weekly minimums.</p></p><p></p>

<p><h4>Essential responsibilities:</h4> <p>Aerostat operators/user-level maintainers will participate in the overall, hands-on operation of the aerostat system including launch, in-flight, recovery, and moored activities.</p> <p>Candidates will perform all functions to operate the PGSS/PTDS, an aerostat mounted intelligence, surveillance, and reconnaissance (ISR) platform, its mobile mooring platform (MMP), sensor payload(s), communications and navigation systems as well as associated support equipment (boom lift, forklift, all terrain vehicles (ATVs), and electrical power generators).</p> <p>Candidate will perform user-level maintenance functions including performing hands-on preventative maintenance checks and services (PMCS), troubleshooting, removing and replacing line replaceable units (LRUs), and removing and replacing payloads.</p> <p>Candidate must possess a diverse range of skills with the ability to quickly adapt to new situations. Tasks will be performed under direction of higher classified technicians and/or site personnel.</p> <h4>Minimum requirements:</h4> <ul> <li>High school diploma or equivalent is required.</li> <li>Two-year associate’s degree in a technical field from an accredited college can substitute for work experience.</li> <li>Must have an active secret US government clearance or the ability to obtain a secret clearance. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must have a valid U.S. passport with a minimum of one year remaining.</li> <li>Must have valid US driver’s license.</li> <li>Knowledge of and experience in the operations of hardware systems and components.</li> <li>Experience in fault detection, isolation, and correction of hardware systems and individual components.</li> <li>Ability to perform routine system maintenance and analysis functions including: hardware configurations; adding, removing and replacing hardware components; use of hardware and software diagnostic testing tools; reading of electronic circuit schematics; and repairing printed circuit boards.</li> <li>At least one (1) year previous aerostat experience OR two (2) years of experience in the following areas may be substituted in lieu of aerostat experience:</li> </ul> <p><strong>1) Electrical maintenance mechanic</strong></p> <ul> <li>Possess at least two (2) years aerostat experience as an operator at the 20 series level or greater from Army MOS 35F (Intelligence Analyst), 35G (Geospatial Intelligence Imagery Analyst), 35H (Common Ground System Analyst), 96R (Ground Surveillance Systems Operator), 96U (Unmanned Aerial Vehicle Operator), or military branch equivalent.</li> <li>Two years of hands-on experience in performing operations and maintenance tasks either on an aerostat system or a related industry/military equivalent is required.</li> <li>Must be qualified at the 10 series or greater level (via military or civilian technical schools) is required.</li> <li>Ability to read electronic schematics.</li> <li>O&M of electro-mechanical equipment to include one or more of the following: <ul> <li>Hydraulic/servo valves</li> <li>Hydraulic actuators, control systems</li> <li>Test and diagnostic equipment</li> </ul> </li> </ul> <p><strong>2) Networking, IT & information systems</strong></p> <ul> <li>Two years’ experience is required.</li> <li>Must be qualified at the 10 series or greater level; MOS 25B/F or other military branch equivalent or industry occupational specialties as a CISCO Network Administrator; Army MOS 25L/N or other military branch equivalent or industry occupational specialties as a Network Installation (BICSI or Network + or Comp T Certification) will be considered.</li> <li>CCIE certification with fiber optic certification is preferred.</li> </ul> <p><strong>3) Mechanical maintenance</strong></p> <ul> <li>Mechanical maintenance with qualifications at the 10 series or greater from U.S. Army MOS 94D/X and 91/B/S/W or other military branch equivalent, or industry occupational specialties such as National Institute for Automotive Service Excellence (ASE) Certified Truck Mechanic or Federal Aviation Administration (FAA) General Mechanic 1 or greater.</li> <li>Two years of hands-on experience on an aerostat system or a related industry/military equivalent is required.</li> <li>O&M of mechanical equipment to include one or more of the following: hydraulic systems, winch systems, tether/cable handling systems, industrial generator sets, power switch gear, HVAC, cranes aerial lift, forklift, industrial generator sets.</li> </ul> <h4>Physical requirements:</h4> <ul> <li>Requires the ability to regularly lift up to 50 lbs.</li> <li>Requires the ability to regularly climb extension ladders, roof ladder, stepladders, and stairs at least 10 times during shift.</li> <li>Requires the flexibility to bend/stoop, squat repetitive during shift.</li> <li>Requires the ability to regularly kneel repetitive for shift.</li> <li>Requires the ability to move in a 90-degree fashion on a repetitive basis for shift.</li> <li>Requires the ability to stretch/reach on a repetitive basis for shift.</li> <li>Requires the ability to walk extensively throughout the plant during shift.</li> <li>Requires the ability to interact with all clients in a professional and friendly manner despite periods of stress.</li> </ul> <h4>Medical requirements:</h4> <p>Successfully complete and pass the medical and dental examinations as required by the employer and customer for deployment to Iraq.</p> <p>Must maintain physical and dental requirements for the duration of the deployment.</p> <h4>Working and living conditions:</h4> <p>This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environment. Temperatures can reach 120-130 degrees Fahrenheit/50-55 degrees Celsius during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to CENTCOM, EUCOM, and AFRICOM for extended periods. Work schedules are a minimum of 6 days per week and 10 hours per day, while some jobs have higher daily and weekly minimums.</p></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Aerostat Operators provide Operations and Sustainment (O&amp;S) support for the Persistent Surveillance Systems Tethered (PSS-T) program in OCONUS site locations. PSS-T is comprised of former Persistent Ground Surveillance System (PGSS) and Persistent Threat Detection System (PTDS) programs. Position is contingent based upon availability and possible class dates. Updates to your application may be delayed. Essential Responsibilities: • Aerostat Operators/User-level maintainers will participate in the overall, hands-on operation of the aerostat system including launch, in-flight, recovery, and moored activities. • Candidates will perform all functions to operate the PGSS/PTDS, an aerostat mounted Intelligence, Surveillance, And Reconnaissance (ISR) platform, its Mobile Mooring Platform (MMP), Sensor Payload(s), communications and navigation systems as well as associated support equipment (Boom Lift, Forklift, All Terrain Vehicles (ATV's), and Electrical Power Generators). • Candidate will perform User-level maintenance functions include performing hands-on Preventative Maintenance Checks and Services (PMCS), troubleshooting, removing and replacing Line Replaceable Units (LRUs), and removing and replacing payloads. • Candidate must possess a diverse range of skills with the ability to quickly adapt to new situations. Tasks will be performed under direction of higher classified technicians and/or site personnel.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Minimum Requirements:</p><ul><li>High school diploma or equivalent is required.</li><li>Two-year Associate s degree in a technical field from an accredited college can substitute for work experience.</li><li>Must have an active Secret US Government Clearance or the ability to obtain a Secret clearance. Note: US Citizenship is required to obtain a Secret Clearance.</li><li>Must have a valid U.S. passport with a minimum of one year remaining.</li><li>Must have valid US Driver's license.</li><li>Knowledge of and experience in the operations of hardware systems and components.</li><li>Experience in fault detection, isolation, and correction of hardware systems and individual components.</li><li>Ability to perform routine system maintenance and analysis functions including: hardware configurations; adding, removing and replacing hardware components; use of hardware and software diagnostic testing tools; reading of electronic circuit schematics; and repairing printed circuit boards.</li><li>At least one (1) year previous Aerostat experience OR two (2) years of experience in the following areas may be substituted in lieu of aerostat experience:</li><ul><li>1) Electrical Maintenance Mechanic</li><ul><li>Possess at least two (2) year s aerostat experience as an operator at the 20 series level or greater from Army MOS 35F (Intelligence Analyst), 35G (Geospatial Intelligence Imagery Analyst), 35H (Common Ground System Analyst), 96R (Ground Surveillance Systems Operator), 96U (Unmanned Aerial Vehicle Operator), or military branch equivalent.</li><li>Two years of hands-on experience in performing operations and maintenance tasks either on an AEROSTAT system or a related industry/military equivalent is required.</li><li>Must be qualified at the 10 series or greater level (via military or civilian technical schools) is required.</li><li>Ability to read electronic schematics.</li><li>O&amp;M of electro-mechanical equipment to include one or more of the following:</li><ul><li>Hydraulic/servo valves</li><li>Hydraulic actuators, control systems</li><li>Test and diagnostic equipment</li></ul></ul><li>2) Networking, IT &amp; information systems</li><ul><li>Two years experience is required.</li><li>Must be qualified at the 10 series or greater level; MOS 25B/F or other military branch equivalent or industry occupational specialties as a CISCO Network Administrator; Army MOS 25L/N or other military branch equivalent or industry occupational specialties as a Network Installation (BICSI or Network + or Comp T Certification) will be considered.</li><li>CCIE certification with fiber optic certification is preferred.</li></ul><li>3) Mechanical Maintenance</li><ul><li>Mechanical Maintenance with qualifications at the 10 series or greater from U.S. Army MOS 94D/X and 91/B/S/W or other military branch equivalent, or industry occupational specialties such National Institute for Automotive Service Excellence (ASE) Certified Truck Mechanic or Federal Aviation Administration (FAA) General Mechanic 1 or greater.</li><li>Two years of hands-on experience on an AEROSTAT system or a related industry/military equivalent is required.</li><li>O&amp;M of mechanical equipment to include one or more of the following: Hydraulic systems, Winch systems, Tether/cable handling systems, Industrial generator sets, Power switch gear, HVAC, Cranes Aerial lift , Forklift , Industrial generator sets</li></ul></ul><p>Physical Requirements:</p><ul><li>Requires the ability to regularly lift up to 50 lbs.</li><li>Requires the ability to regularly climb extension ladders, roof ladder, stepladders, and stairs at least 10 times during shift.</li><li>Requires the flexibility to bend/stoop, squat repetitive during shift.</li><li>Requires the ability to regularly kneel repetitive for shift.</li><li>Requires the ability to move in a 90-degree fashion on a repetitive basis for shift.</li><li>Requires the ability to stretch/reach on a repetitive basis for shift.</li><li>Requires the ability to walk extensively throughout the plant during shift.</li><li>Requires the ability to interact with all clients in a professional and friendly manner despite periods of stress.</li></ul><p>Medical Requirements</p><ul><li>Successfully complete and pass the medical and dental examinations as required by Amentum and our customer for deployment to Iraq.</li><li>Must maintain physical and dental requirements for the duration of the deployment.</li></ul><p>Working and Living Conditions: This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environment. Temperatures can reach 130 degrees Fahrenheit/50-55 degrees Celsius during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to CENTCOM, EUCOM, and AFRICOM for extended periods. Work schedules are a minimum of 6 days per week and 10 hours per day, while some jobs have higher daily and weekly minimums.</p></ul><p></p></section>

<p>The Team Member provides armed protection security for client contracts. They are responsible for maintaining the highest standards and presenting the team and its capabilities to clients. They are compliant with Control Risks standard operating procedures (SOPs) at all times and work with colleagues to deliver the best possible service to the client.</p><p><strong>Tasks and Responsibilities:</strong></p><ul><li>Demonstrates client etiquette, discipline and Control Risks low-profile approach</li><li>Remains informed about the threats and key issues in Iraq</li><li>Conducts vehicle and dismounted contact and immediate action drills</li><li>Possesses competent navigation skills, including map-reading, compass and use of GPS</li><li>Uses vehicle-mounted and handheld communications systems</li><li>Complies with Rules of Engagement and Use of Force</li><li>Maintains competence in all required skills through regular formal assessment</li><li>Conducts effective administration, such as vehicle maintenance, equipment husbandry/accountability and reports and returns</li><li>Assists in conducting risk assessments and operational planning</li><li>Issues orders to team members and briefs clients in line with SOPs when required</li><li>Conducts venue and route recces and produces reports</li><li>Commands the team and issues direction to clients</li></ul><p><br></p><p><br></p><p><strong>Desired Candidate Profile</strong></p><ul><li>Essential Minimum of 5 years of military/police experience, with at least 6 months of operation experience</li><li>12 months commercial experience working within a hostile environment (preferably Iraq)</li><li>Attendance on an internationally regarded military Non-Commissioned Officer or similar organisational command and leadership course such as the British Army Section Commanders Battle Course (or higher).</li><li>Fluent English speaker and writer</li><li>Preferred Experience managing operations for oil and gas clients</li><li>Experience managing local guard force</li><li>Experience working for Control Risks in Iraq</li><li>Non-native English speakers from countries where English is not the official language: proof (dated within the last two years) of language ability based on the TOEFL testing process with score of 110 or above or the IELTS of 8 or above.</li><li>Valid SIA Frontline Close Protection License or country equivalent</li><li>Valid certificate for FPOS-I Level 4 and/or FREC Level 3 and/or AoFAQ Level 3</li><li>Military records</li><li>Holds a BTEC Level 3 Close Protection Certificate recognised by the Security Industry Authority (SIA) and accredited by Ofqual</li><li>HECPO qualified preferable</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>A foreman or foreperson supervises and coordinates the work of a crew of workers in a specific craft or trade. Foremen are primarily concerned with seeing that the workers under them do their job skillfully and efficiently, and that assigned work progresses on schedule.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>A foreman or foreperson supervises and coordinates the work of a crew of workers in a specific craft or trade. Foremen are primarily concerned with seeing that the workers under them do their job skillfully and efficiently, and that assigned work progresses on schedule.</p><p></p></section>

<p>The Disposal operator will be based at Amentum Baghdad Embassy Compound (BEC) in Baghdad, Iraq, and serve the Base Life Support Services contract in support of the State Department. This position will report to the Disposal Yard Manager. The duties and responsibilities listed below are representative of the nature and level of work assigned and are not necessarily all inclusive.</p><p>DUTIES:</p><ul><li>Responsible for maintaining a safe workplace and ensuring that safety is the highest priority in the workplace.</li><li>Comply with all Environmental Health &amp; Safety and Quality Assurance requirements and goals.</li><li>Provide information and materials to these divisions as necessary to ensure adequate and legal documentation.</li><li>Ensures data accuracy and update of equipment inventory database.</li><li>Ensure that related data related to activities meet the requirements.</li><li>Process excess documentation for all controlled and non-controlled excess equipment and materials.</li><li>Review, reconcile, adjust and process all inventory transactions.</li><li>Process and coordinate Equipment Transfers.</li><li>Assist in a broad scope of direct and indirect support activities involving customer owned equipment as necessary to complete assigned tasks.</li><li>Conduct daily inspections of assigned equipment and immediately report defects or maintenance requirements.</li><li>Assist with scrap metal processing and preparation for disposal or recycling.</li><li>Assist in contingency waste removal operations during emergencies, special events, or increased operational requirements.</li><li>Perform additional duties and projects assigned.</li></ul><p>REQUIRED:</p><p>Minimum Acceptable Experience Level: Minimum 4 or more years experience handling waste management and disposal activity. Previous experience in waste management, sanitation, logistics, construction support, or material handling preferred.</p><p>Ability to operate or learn Disposal collection equipment and material handling equipment.</p><p>Ability to communicate effectively with supervisors and team members.</p><p>Knowledge, Skills, and Abilities:</p><ul><li>Prior proven experience in Property Disposal operations with Defense Reutilization</li><li>Experience operating heavy equipment to include up to a 30K Forklift, Extended reach Forklift, Material Handler, Grappler (Excavator), Front End Loader and Material Shredders.</li><li>Experience with cutting torches to include Plasma cutters.</li><li>Commitment to maintaining a high-performance team which delivers customer service excellence.</li><li>Knowledge of principles and processes involved in supporting contract responsibilities at an overseas facility.</li><li>Ability to work in a fast-paced environment requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules.</li><li>Cross-cultural sensitivity with an international perspective.</li><li>Excellent organizational and time management skills.</li><li>Computer skills, specifically in Microsoft Word and Excel.</li><li>Ability to become an active and functioning member of a team.</li><li>Ability to be innovative and be an agent for change.</li><li>Ability to prioritize multiple tasks in a fast-paced operational environment.</li><li>Basic recordkeeping and reporting skills.</li></ul><p>Physical Requirements</p><ul><li>Frequently lift and carry materials weighing up to 25 kg.</li><li>Stand, walk, bend, climb, kneel, and work for extended periods.</li><li>Operate manual and powered equipment safely.</li><li>Work in dusty, noisy, and outdoor environments.</li><li>Wear required PPE, including safety boots, gloves, eye protection, hearing protection, and reflective clothing.</li></ul><p>Working Conditions</p><p>Outdoor and industrial work environment. Exposure to heat, dust, noise, and moving equipment. May be required to work overtime, weekends, holidays, or emergency callouts to support mission requirements.</p><p>Performance Expectations</p><ul><li>Complete disposal operations safely, efficiently, and on schedule.</li><li>Maintain high standards of cleanliness throughout assigned work areas.</li><li>Ensure waste is properly segregated and disposed of in accordance with environmental requirements.</li><li>Demonstrate reliability, professionalism, accountability, and teamwork while supporting mission operations.</li></ul><p>Education:</p><p>A high school diploma or GED (General Education Diploma) Certifications or 4 years substitute experience in waste management and disposal services will be acceptable.</p><p>Valid Iraqi driver s license (if operating company vehicles).</p><p>Security Vetting: Already possess a RSO issued security clearance or be able to obtain a favorable RSO issued clearance prior to being hired is required for the position. Must maintain eligibility at the required certification or clearance level for the duration of the contract.</p><p>Language Skills: Satisfactory English and Arabic proficiency to meet job requirements and to adhere and comply with safety, health, and security measures.</p><p>Medical: Successfully complete and pass the medical and drug examinations as required by Amentum and our customer for deployment to Iraq. Must maintain physical and drug requirements for duration of deployment.</p><p>DESIRED:</p><p>Previous out of home country experience and previous work experience in harsh environmental conditions are a plus. Experience supporting Department of State. Experience working with Amentum.</p><p><br></p><p><strong>Desired Candidate Profile</strong></p><ul><li>Minimum 4 or more years experience handling waste management and disposal activity.</li><li>Previous experience in waste management, sanitation, logistics, construction support, or material handling preferred.</li><li>Ability to operate or learn Disposal collection equipment and material handling equipment.</li><li>Ability to communicate effectively with supervisors and team members.</li><li>Prior proven experience in Property Disposal operations with Defense Reutilization</li><li>Experience operating heavy equipment to include up to a 30K Forklift, Extended reach Forklift, Material Handler, Grappler (Excavator), Front End Loader and Material Shredders.</li><li>Experience with cutting torches to include Plasma cutters.</li><li>Commitment to maintaining a high-performance team which delivers customer service excellence.</li><li>Knowledge of principles and processes involved in supporting contract responsibilities at an overseas facility.</li><li>Ability to work in a fast-paced environment requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules.</li><li>Cross-cultural sensitivity with an international perspective.</li><li>Excellent organizational and time management skills.</li><li>Computer skills, specifically in Microsoft Word and Excel.</li><li>Ability to become an active and functioning member of a team.</li><li>Ability to be innovative and be an agent for change.</li><li>Ability to prioritize multiple tasks in a fast-paced operational environment.</li><li>Basic recordkeeping and reporting skills.</li><li>A high school diploma or GED (General Education Diploma) Certifications or 4 years substitute experience in waste management and disposal services will be acceptable.</li><li>Valid Iraqi driver s license (if operating company vehicles).</li><li>Already possess a RSO issued security clearance or be able to obtain a favorable RSO issued clearance prior to being hired is required for the position. Must maintain eligibility at the required certification or clearance level for the duration of the contract.</li><li>Satisfactory English and Arabic proficiency to meet job requirements and to adhere and comply with safety, health, and security measures.</li><li>Successfully complete and pass the medical and drug examinations as required by Amentum and our customer for deployment to Iraq. Must maintain physical and drug requirements for duration of deployment.</li><li>Previous out of home country experience and previous work experience in harsh environmental conditions are a plus.</li><li>Experience supporting Department of State.</li><li>Experience working with Amentum.</li><li>Knowledge of the principles and processes involved in Quality Control Management.</li><li>Successful management of multiple sites in geographically dispersed locations.</li><li>Ability to collect, analyze and summarize data and to prepare clear and concise reports.</li><li>Experience in effectively dealing with international and headquarters staff, and sensitivity to other cultures.</li><li>Exercise sound judgment and make decisions independently.</li><li>Excellent organizational and time management skills, with the ability to handle multiple tasks and administrative details in a fast paced and constantly changing environment.</li><li>Expert communication skills to facilitate and disseminate information.</li></ul>

<p>• Relationship Management: Pitch the hotel’s corporate rates, amenities, and event hosting capabilities to potential business clients.</p><p>• Lead Conversion: Secure follow-up meetings or send formal corporate booking proposals via email.</p><p>• Pipeline Tracking: Maintain precise, daily updates on call outcomes, email responses, and booking pipelines.</p><p>&nbsp;</p><p>Qualifications &amp; Skills:</p><p>• Minimum 1–2 years of experience in telesales, customer service, or B2B sales (experience with telecom call centers or hospitality is a major plus).</p><p>• Highly professional telephone manner with excellent communication and negotiation skills in Iraqi Arabic (English is a strong asset).</p><p>• Proven ability to handle objections confidently and maintain a polite, respectful demeanor with corporate executives.</p><p>• Strong computer literacy (Microsoft Excel / Google Sheets, CRM platforms like HubSpot or similar).</p><p>• Goal-oriented mindset with a track record of meeting daily call quotas and targets.</p><p>&nbsp;</p><p>What We Offer:</p><p>• Competitive base salary.</p><p>• Professional training in hospitality B2B sales.</p><p>• Opportunities for career growth within our expanding hospitality group.</p><p>&nbsp;</p><p>To Apply:</p><p>Job Title: B2B Corporate Telesales Specialist</p><p>Location: Baghdad, Iraq (On-site / Hybrid)</p><p>Industry: Hospitality / Luxury Hotel Sector</p><p>Job Type: Full-time</p><p>&nbsp;</p><p>About Us:</p><p>Baz hotel is a leading hospitality provider in Baghdad, catering to international corporate guests, engineering bureaus, and local enterprises. We are expanding our commercial team and looking for a driven, professional Telesales Specialist to build and manage our corporate client database and secure corporate booking agreements.</p><p>&nbsp;</p><p>Key Responsibilities:</p><p>• Outbound Calling: Conduct daily professional cold and warm calls to companies, NGOs, oil &amp; gas firms, and engineering bureaus in Baghdad to identify corporate travel decision-makers.</p><p>• Database Building: Identify, verify, and document key contact information (HR Managers, Procurement Officers, Public Relations) into the hotel's CRM system.</p><p>• Relationship Management: Pitch the hotel’s corporate rates, amenities, and event hosting capabilities to potential business clients.</p><p>• Lead Conversion: Secure follow-up meetings or send formal corporate booking proposals via email.</p><p>• Pipeline Tracking: Maintain precise, daily updates on call outcomes, email responses, and booking pipelines.</p><p>&nbsp;</p><p>Qualifications &amp; Skills:</p><p>• Minimum 1–2 years of experience in telesales, customer service, or B2B sales (experience with telecom call centers or hospitality is a major plus).</p><p>• Highly professional telephone manner with excellent communication and negotiation skills in Iraqi Arabic (English is a strong asset).</p><p>• Proven ability to handle objections confidently and maintain a polite, respectful demeanor with corporate executives.</p><p>• Strong computer literacy (Microsoft Excel / Google Sheets, CRM platforms like HubSpot or similar).</p><p>• Goal-oriented mindset with a track record of meeting daily call quotas and targets.</p><p>&nbsp;</p><p>What We Offer:</p><p>• Competitive base salary.</p><p>• Professional training in hospitality B2B sales.</p><p>• Opportunities for career growth within our expanding hospitality group.</p><p>&nbsp;</p>

<p><h4>Job summary</h4> <p>Amentum is seeking an aviation logistics specialist to support associated aircraft maintenance and parts inventory/supply opportunity in Martyr BG Ali Flaih Air Base, Iraq (Balad Air Base). The selected candidate will possess versatile skills and abilities to perform a wide range of responsibilities that encompass administration, logistics, inventory requirements, and reporting throughout the procurement lifecycle to ensure timelines and inventory are met to sustain program requirements. The aviation maintenance specialist is responsible for the overall management of material requirements and control necessary for program support on site at Martyr BG Ali Flaih Air Base, Iraq. Direct and manage all logistics. Will exercise sound judgement in making decisions by an understanding of operational requirements, the available resources and options, and analyzing the impacts – both short term and long term. This person shall have knowledge of, and ability to, validate aircraft parts status, inventory and storage of aircraft parts and all aspects of receiving and shipping out repairs. The candidate shall have experience updating aircraft data collection systems files. The selected candidate will consider and engage all stakeholders to help ensure the most effective solutions to problems and maintain open and continuous communications and updates as appropriate. The candidate shall be responsible in assisting with all parts logistics support operations, to include procurement – requisition process, inventory and storage and maintain status trackers. Will be the primary point of contact to ensure property records and required documentation are maintained and compliant with requirements. Compile and submit daily, weekly, and other reports as required. These can include and are not limited to accountability reports, parts trackers, and any other reporting as needed. The duties and responsibilities listed below are representative of the nature and level of work assigned.</p> <h4>Knowledge & skills</h4> <ul> <li>Initiates purchase requisitions, transportation of goods, allocation of procurements.</li> <li>Provide leadership with KPIs and necessary data to ensure adequate logistic support.</li> <li>Forecast and track procurements of all parts for purchase, repair and/or calibration for the health of the program.</li> <li>Work closely with business manager and program manager to manage contract material funding and special contract funds.</li> <li>Ensures DOT, IATA and other transportation compliance and requirements are adhered to in conjunction with the Amentum QCC Center and the program logistics manager.</li> <li>Ensures inventory control of government assets for the entire program.</li> <li>Uses supply chain software and resolves customer, shipment, and host country issues.</li> <li>Prepare all necessary correspondence required in the performance of this effort for government review, approval and release.</li> <li>Assist with establishing and maintaining written procedures for the proper control of government furnished property and contractor acquired property.</li> <li>Submit changes to established procedures ensuring all functions are consistent with written procedures.</li> <li>Establish and maintain stocking levels of government property to ensure materials are available to meet maintenance requirements.</li> <li>Maintain inventory at lowest possible cost to the government.</li> <li>Interface with program manager and logistics manager on issues involving procedural deficiencies.</li> <li>Maintain accurate records of government property throughout the acquisition and disposition process.</li> <li>Perform other duties as assigned.</li> </ul> <h4>Experience & education</h4> <ul> <li>Six (6) years of experience in supply chain/logistics/warehousing, experience in material management for government, DoD, or commercial supply chain.</li> <li>Two (2) years experience in aviation parts acquisition preferred.</li> <li>High school diploma or equivalent. Bachelor's degree preferred.</li> <li>FAA or DoD related aviation supply parts experience.</li> <li>Experience in and capable of managing supply functions such as storage, issue, inspection, research, repairable processing, shipping, receiving, warehousing, aircraft maintenance support, preparing requisitions, procurement, and accounting for aircraft parts and equipment.</li> <li>Ability to work in a fast-paced environment that requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules.</li> </ul> <h4>Compensation details</h4> <p>$38.00 per hour</p> <p>The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws.</p> <h4>Benefits overview</h4> <p>Our health and welfare benefits are designed to support you and your priorities. Offerings include:</p> <ul> <li>Health, dental, and vision insurance</li> <li>Paid time off and holidays</li> <li>Retirement benefits (including 401(k) matching)</li> <li>Educational reimbursement</li> <li>Parental leave</li> <li>Employee stock purchase plan</li> <li>Tax-saving options</li> <li>Disability and life insurance</li> <li>Pet insurance</li> </ul> <p>Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a collective bargaining agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits.</p> <h4>Additional information</h4> <p>Original posting: 06/15/2026 - Until filled</p> <p>Amentum anticipates this job requisition will remain open for at least three days, with a closing date no earlier than three days after the original posting. This timeline may change based on business needs.</p> <p>Amentum is proud to be an equal opportunity employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law.</p></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview ***This position is physically located in Iraq*** Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. Under the supervision of the Chef, the Sous Chef coordinates and prepares food services function, to include food preparation, cooking and baking. May develop menus based on type of food to be prepared and applies personal knowledge and experience in food preparation. Prepares, seasons, cooks and portions meats, vegetables, desserts, and other foodstuffs for consumption. May assist in specific on-the-job training, guidance, and orientation for newly assigned or lower seniority employees. Responsible for care of Government equipment, tools, property and materials to assure that they are properly maintained and safeguarded. Performs specific tasks in accordance with verbal and/or written instructions and observes safety, fire, health, and work rules. Coordinates with members of other activities to insure quality and timely and efficient accomplishment of assigned duties. Familiar with a variety of the field’s concepts, practices and procedures. Leads and directs the work of cooks and other workers engaged in preparing and cooking foodstuffs. Performs other duties and assignments as required. Responsibilities This position description is subject to change at any time as needed to meet the requirements of the program or company. + Coordinates and prepares food services function, to include food preparation, cooking and baking. + May develop menus based on type of food to be prepared and applies personal knowledge and experience in food preparation. + Prepares, seasons, cooks and portions meats, vegetables, desserts, and other foodstuffs for consumption. + May assist in specific on-the-job training, guidance, and orientation for newly assigned or lower seniority employees. + Responsible for care of Government equipment, tools, property and materials to assure that they are properly maintained and safeguarded. + Performs specific tasks in accordance with verbal and/or written instructions and observes safety, fire, health, and work rules. + Coordinates with members of other activities to insure quality and timely and efficient accomplishment of assigned duties. + Familiar with a variety of the field’s concepts, practices and procedures. + Leads and directs the work of cooks and other workers engaged in preparing and cooking foodstuffs. + Performs other duties and assignments as required. Qualifications + Minimum Qualifications: Education/Certifications: One-year related experience may be substituted for one year of education, if degree is required. + Undergraduate Degree + ServSafe Certification or Food Service Certification approved under ANSI-CFP accredited programs and/or approved under the Tri Service Food Code guidelines. + OCN Qualifications/Experience Requirements: + Undergraduate Degree + One-year related experience may be substituted for one year of education, if degree is required, but must have a high school diploma or equivalent. + Must provide a copy of the diploma. + ServSafe Certification or Food Service Certification approved under ANSI-CFP accredited programs and/or approved under the Tri Service Food Code guidelines + Minimum of 5 years of experience in as a Sous Chef and a minimum of 2 years in Leadership Must be able to read write and speak English fluently. + Skills: + Must read, write, and speak English fluently + Working Conditions: + Must be capable of working in an extreme weather conditions with temperatures exceeding 120 degrees Fahrenheit. + Indoor and/or outdoor environment with very adverse and harsh conditions (i.e., hot, dry, dusty, desert environment with average temperatures of 30 degrees in the winter and 130 degrees in the summer months). + Includes some industrial production environment conditions as well + Physical Requirements: + Light work. Exerting up to 20 pounds of force occasionally, and/or up to 10 pounds of force frequently, and/or a negligible amount of force constantly to move objects. If the use of arm and/or leg controls requires exertion of forces greater than that for sedentary work and the worker sits most of the time, the job is rated for light work. + Employee use of personal protective equipment (PPE) is required for some situations. PPE includes, but is not limited to, head, foot, torso, respiratory, vision, and hearing protective devices. + Must comply with all Fire and Safety Regulations and post policies. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Job Title: Inventory / SCM Location: Iraq Experience: 3 5 Years Job Summary We are seeking an experienced Inventory / SCM Support Engineer to support warehouse operations, inventory validation, and ERP-based supply chain processes. The ideal candidate should have hands-on experience with Oracle, SAP, or IBM Maximo , along with strong knowledge of warehouse operations, barcode/RFID technologies, and physical inventory verification. Key Responsibilities Perform inventory validation and physical stock verification. Support warehouse mapping and material master data validation. Troubleshoot barcode scanners, RFID devices, and warehouse hardware. Execute inventory transactions and reconciliation in Oracle, SAP, or Maximo. Identify and resolve inventory discrepancies. Support warehouse system testing, implementation, and on-site validation. Coordinate with warehouse, logistics, and IT teams to ensure inventory accuracy.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor's degree in Supply Chain, Logistics, Engineering, IT, or a related field.</li><li>3 5 years of experience in warehouse operations or SCM systems.</li><li>Hands-on experience with Oracle SCM, SAP MM/WM/EWM, or IBM Maximo .</li><li>Strong knowledge of inventory control, warehouse operations, and material management.</li><li>Experience with barcode/RFID devices and warehouse hardware troubleshooting.</li><li>Strong analytical, communication, and problem-solving skills.</li><li>Preferred Experience in Oil &amp; Gas, Industrial, or Large Enterprise environments.</li><li>Oracle, SAP, Maximo, or Supply Chain certifications are an advantage.</li></ul><p></p></section>