Logistics Manager Jobs in Iraq
630 Jobs Found
Halliburton
Iraq - Basra
<p>Under general supervision: From Surface Facilities IAM Project Manager or Project/Asset Manager, supervises the operations on the field projects for a given project or several projects in an asset. Establishes scope of work with site customer and site representative. Checks design documentation for adequacy to specific site conditions and agreed scope of work. Proposes engineering adjustments to site condition as required. Visits site before and during the project and verifies that applied project procedures by contractor will allow compliance of technical requirements and timely completion. Additional responsibilities include verifying project advance payment and contractor resource allocation; commenting and proposing adjustments to comply with project schedule and budget; verifying safety conditions at site and stop work if required; informing management and personnel of unsafe practice. Also participates in site project meetings with contractor and customer, and coordinates site inspection by QA/QC, HSE and commissioning teams in a timely matter. Prepares periodic reports for upper management.</p><p>Additional Role Responsibilities: (1). Supervises the activities of assigned personnel at BIN-UMAR &SINDBAD Stations well site. Performs supervisory duties at the level established by management for the position; (2). Supervises all activities under the Company Health, Safety and Environment (HSE) policies and procedures are fully implemented and adhered to, so that Loss Prevention is maximized; (3). Drive innovative solutions to operating issues, ensure accurate measurement and optimize operations; (4). Prepare, maintain, and execute terminal operating and capital budgets, establish and monitor key performance indicators; (5). Set priorities, assign projects, monitor progress and set standards for a high performing team; (6). Organization and Cooperate with maintenance team do the PM/CM and troubleshooting jobs; (7). Monitor and operate the SAP/CMMS system. (8). Contribute and participate in successful completion of plant improvements; (9). Performs E.R.T. responsibilities as stipulated in Loss Control Procedures and acts as an emergency response team Managerer in case of emergency. (10). Control, minimize and monitor flare losses & waste generation. (11). Coordinates with Royal commission and other outside party for flare losses & waste management. (12). Identify team and individuals limitations and develop contingency plans to address any short fall.</p><p>Qualifications Requires undergraduate degree in Engineering or similar discipline, and preferably a minimum of five (5) years of progressive experience in planning, design and construction of surface facilities for oil fields. Preferred Experience: Minimum of 10-15 years relevant experience in their discipline or in an operations environment within the oil & gas industry. Recognized International Qualifications (NVQ, C&G, OPITO etc) Valid Emergency Response competence CMMS/SAP Experience Coaching & Development Experience (Competence Assessors preferred) Commissioning experience Experience from similar challenging environments. (Wells experience a must for production operations personnel) Valid trade competencies (Complex, Flange Management, ESR s, Small bore tubing etc.) Internationally recognized driving license Good English skills, Arabic speaking advantageous ISSOW/PTW experience</p><p>Location Oils Opertion ST,N 29 Burjesia, Basra, Basrah, 61006, Iraq Job Details Requisition Number: PHONE_NUMBER Experience Level: Experienced Hire Job Family: Operations Product Service Line: Halliburton Project Management Full Time / Part Time: Full Time Additional Locations for this position: Compensation Information Compensation is competitive and commensurate with experience.</p><p><strong>Desired Candidate Profile</strong></p>Requires undergraduate degree in Engineering or similar discipline, and preferably a minimum of five (5) years of progressive experience in planning, design and construction of surface facilities for oil fields. Preferred Experience: Minimum of 10-15 years relevant experience in their discipline or in an operations environment within the oil & gas industry. Recognized International Qualifications (NVQ, C&G, OPITO etc) Valid Emergency Response competence CMMS/SAP Experience Coaching & Development Experience (Competence Assessors preferred) Commissioning experience Experience from similar challenging environments. (Wells experience a must for production operations personnel) Valid trade competencies (Complex, Flange Management, ESR s, Small bore tubing etc.) Internationally recognized driving license Good English skills, Arabic speaking advantageous ISSOW/PTW experience
Control Risks Group Holdings Ltd
Iraq - Baghdad
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<p><strong>Job Purpose</strong></p><br><p>The Team Leader (TL) has a significant impact on how potential clients assess Control Risks’ capabilities. The TL is responsible for setting and maintaining the highest standards of team presentation and capability to the client, and will coordinate the direction and management of the team. The TL ensures that the team meets all operational and training standards with assistance from the training team and that the team is fully compliant with Control Risks’ standard operating procedures (SOPs) and doctrine at all times. The TL assists in mission planning for all tasks as detailed by the Operations Manager. The TL is responsible for the professional delivery of operational briefs to both the team and clients when required. </p><br><p><strong>Application closing date: 04 September 2026</strong></p><br><p><strong>Start Date: 15 September 2026</strong></p><br><p><strong>_____________________________________________________________________</strong></p><br><p><strong>Role tasks and responsibilities</strong></p><br><ul><li>Demonstrates competence in Control Risks’ SOPs and personal skills.</li><li>Displays client etiquette, discipline and maintain Control Risks’ low profile approach.</li><li>Remains informed about the threats and key issues in Iraq.</li><li>Conducts vehicle and dismounted contact and immediate action drills.</li><li>Maintains advanced first aid skills.</li><li>Possesses competent navigation skills including map-reading, compass and use of GPS.</li><li>Uses vehicle-mounted and handheld communications systems.</li><li>To be fully conversant and comply with Rules for the Use of Force (RUF).</li><li>Maintains competence in all required skills through regular formal assessment.</li></ul><p><strong>Management responsibilities</strong></p><br><ul><li>Conducts certifiable instruction in all relevant operational and medical team requirements in accordance with Control Risks’ training directives.</li><li>Ensures the team maintains a professional approach, appropriate client etiquette, discipline and presentation.</li><li>Ensures that the team conducts effective administration, including vehicle maintenance, equipment husbandry/accountability and reports and returns.</li></ul><p><strong>Operational responsibilities</strong></p><br><ul><li>Assists in conducting risk assessments and operational planning.</li><li>Issues orders to team members and brief clients in line with SOPs when required.</li><li>Conducts venue and route recces and produce reports.</li><li>Commands the team and issue direction to clients.</li><li>Provides emergency medical and primary health.</li></ul> </div>
Halliburton
Iraq - Baghdad
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<span>
<span></span></span><p>We are looking for the right people — people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world’s largest providers of products and services to the global energy industry.</p><br><b>Job Duties</b> <br><p>The Petrophysics Advisor provides expert technical leadership in formation evaluation, reservoir characterization, and petrophysical analysis in support for an oil and gas asset managed under an Integrated Asset Management (IAM) contract.</p><br>
<p>Under broad direction from the Subsurface Technical Manager:</p><br>
<ul>
<li>Develop and apply advanced formation evaluation techniques in support of the evaluation and development of potentially large, yet challenging oil and gas field development projects.</li>
<li>The Geophysical Advisor will perform detailed petrophysical analyses using well logs, core, and fluid data to determine porosity, permeability, water saturation, and hydrocarbon volumes. Integrate data from multiple sources (wireline, LWD, core, SCAL, formation tests, RFT/MDT pressure test/fluid samples, mini-fracs, Diagnostic Fracture Injectivity Tests, and geochem analysis) to generate robust reservoir property models. Evaluate and characterize different lithologies and fluid types within complex reservoir systems. Conduct multi-well and field-level petrophysical studies to support reservoir zonation and facies classification. Develop petrophysical models for input into geological and reservoir simulation workflows.</li>
<li>Provide technical oversight during logging operations (wireline and LWD) and post-job evaluations. Oversee the acquisition, processing, and interpretation of well logging data, ensuring data integrity and quality. Ensure consistency and standardization of petrophysical workflows and data management across the asset.</li>
<li>Solid grounding in petrophysics and working knowledge of development geology, static modeling, geomechanics, geologic operations, directional drilling and drilling & completions.</li>
<li>Be actively involved in technical engagements, present to and establish strong working relationships with senior management and key stakeholders</li>
<li>Present to and participate in internal and external reviews ensuring work deliverables are robust and fit-for-purpose.</li>
<li>Mentor and provide technical guidance to less experienced geoscientists within the asset team.</li>
<li>Promote the adoption of best practices, digital tools, and innovative techniques and technologies in petrophysics. The Petrophysics Advisor will collaborate and stay engaged with other key Halliburton petrophysical technical and product service line professionals, resources and research.</li>
</ul>
<p><strong>Qualifications</strong></p><br>
<ul>
<li>Requires an undergraduate degree in petroleum engineering, geology or Applied sciences and a minimum of 10 years of experience in petrophysical evaluation, which includes experience in oil & gas operators, service companies or consulting companies.</li>
<li>Requires field development and reservoir management experience on a producing field for an oil & gas operator.</li>
<li>Extensive experience in clastic and/or carbonate reservoirs; exposure to mature or brownfield assets preferred</li>
</ul> <p><span>Minimum Qualifications: Minimum qualifications may be acquired through technical schools or equivalent related experience. Candidates having qualifications that exceed the minimum job requirements will receive consideration for higher level roles given (1) their experience, (2) additional job requirements, and/or (3) business needs. Depending on education, experience, and skill level, a variety of job opportunities might be available, including Petrophysics Advisor, Petrophysics Advisor, Sr, and Technical Manager. </span></p><br><br><br><br><p><strong>Halliburton is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation</strong>.</p><br> <p><strong><u>Location</u></strong></p><br>
<p>Oils Opertion ST,N°29 Burjesia, Basra, Basrah, 61001, Iraq</p><br> <p><strong><u>Job Details</u></strong></p><br>
<p><strong>Requisition Number:</strong> 210427 <br><strong>Experience Level: </strong>Experienced Hire <br><strong>Job Family:</strong> Engineering/Science/Technology <br><strong>Product Service Line: </strong>Halliburton Project Management <br><strong>Full Time / Part Time: </strong>Full Time</p><br>
<p><strong>Additional Locations for this position: </strong></p><br> <p><u><strong>Compensation Information</strong></u><br>Compensation is competitive and commensurate with experience.</p><br>
</div>
Halliburton
Iraq - Baghdad
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<span>
<span></span></span><p>We are looking for the right people — people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world’s largest providers of products and services to the global energy industry.</p><br><b>Job Duties</b> <br><p><strong>Position Summary</strong></p><br>
<p>The Geology Advisor provides expert geological interpretation, reservoir characterization, and development planning support for an oil and gas asset managed under an Integrated Asset Management (IAM) contract. </p><br>
<p><strong>Job Duties</strong></p><br>
<p>Under broad direction from the Subsurface Technical Manager:</p><br>
<ul>
<li>Develop and apply advanced development geology techniques in support of the evaluation and development of potentially large, yet challenging oil and gas field development projects.</li>
<li>Accountable for ensuring robust geological understanding of the asset, integrating static and dynamic data to guide reservoir management, field development, and production optimization.</li>
<li>The Geology Advisor will support prospect evaluation work by providing validation of preexisting interpretations as well as creating new interpretations (e.g., structure maps, isopach maps, cross sections, annotated bubble maps, etc.)</li>
<li>Role includes data analysis, reservoir characterization and mapping, determination of reservoir rock and fluid properties, static uncertainty/risk management analysis, deterministic/probabilistic in-place hydrocarbon volumetric calculations, static modeling, reserves estimation, and other work related to reservoir understanding / development.</li>
<li>Lead the interpretation of geological, geophysical, petrophysical, and drilling data to develop robust static reservoir models. Integrating well log, core, seismic, and production data to define reservoir architecture, facies distribution, and structural framework.</li>
<li>Solid grounding in development geology and working knowledge of geologic operations, logging, directional drilling, petrophysics, geophysics, rock and core sampling and analysis, reservoir simulation and drilling & completions.</li>
<li>Understands the fundamentals of petroleum engineering, subsurface uncertainties, risks and technical issues associated with subsurface, wells and surface development opportunities.</li>
<li>Collaborate with production and operations teams to identify and implement production enhancement opportunities. Additionally, translates technical insights into actionable operational and development plans.</li>
<li>Be actively involved in technical engagements, present to and establish strong working relationships with senior management and key stakeholders.</li>
<li>Present to and participate in internal and external reviews ensuring work deliverables are robust and fit-for-purpose.</li>
<li>Mentor and provide technical guidance to less experienced geoscientists within the asset team.</li>
<li>Promote the adoption of best practices, digital tools, and innovative techniques in geoscience.</li>
</ul> <p><strong>Qualifications</strong></p><br>
<ul>
<li>Requires an undergraduate degree in Geoscience and a minimum of 10 years of experience in oil and gas exploration and production roles which may include experience in development geology, static modeling, operations geology, field development planning etc.</li>
<li>Requires field development and reservoir management experience working directly (preferred) or indirectly on a producing field for an oil & gas operator</li>
<li>Extensive experience in clastic and/or carbonate reservoirs; exposure to mature or brownfield assets preferred</li>
</ul> <p><span>Minimum Qualifications: Minimum qualifications may be acquired through technical schools or equivalent related experience. Candidates having qualifications that exceed the minimum job requirements will receive consideration for higher level roles given (1) their experience, (2) additional job requirements, and/or (3) business needs. Depending on education, experience, and skill level, a variety of job opportunities might be available, including Geology Advisor, Geology Advisor, Sr, and Technical Manager. </span></p><br><br><br><br><p><strong>Halliburton is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation</strong>.</p><br> <p><strong><u>Location</u></strong></p><br>
<p>Oils Opertion ST,N°29 Burjesia, Basra, Basrah, 61001, Iraq</p><br> <p><strong><u>Job Details</u></strong></p><br>
<p><strong>Requisition Number:</strong> 210422 <br><strong>Experience Level: </strong>Experienced Hire <br><strong>Job Family:</strong> Engineering/Science/Technology <br><strong>Product Service Line: </strong>Halliburton Project Management <br><strong>Full Time / Part Time: </strong>Full Time</p><br>
<p><strong>Additional Locations for this position: </strong></p><br> <p><u><strong>Compensation Information</strong></u><br>Compensation is competitive and commensurate with experience.</p><br>
</div>
Iraq - Baghdad
<p>The Operations Manager will be based at the Baghdad Embassy Compound (BEC) site in Iraq and serve the Operations and Maintenance Support Services (OMSS) contract in support of the U.S. Department of State. This position will be responsible for taking ownership of the site operational responsibilities to include directing the daily performance of the organization, planning, scheduling and training processes to meet the requirements of the contract. This position will report to the OMSS Program Manager. The duties and responsibilities listed below are representative of the nature and level of work assigned and are not necessarily all inclusive.</p><p>DUTIES:</p><ul><li>Responsible for maintaining a safe workplace and ensuring that safety is the highest priority in the workplace.</li><li>Comply with all Environmental Health & Safety and Quality Assurance requirements and goals.</li><li>Development and updating of the operations plan and maintenance program on a monthly basis</li><li>Record keeping for site data including as-builts, O&M manuals, commissioning documentation, design drawings, material and equipment cut sheets, etc.</li><li>Develop and maintain the MSDS program and provide access as specified for all EC personnel.</li><li>Develop , implement, and enforce a comprehensive safety program for all O&M Contractor staff, including periodic inspections and training programs.</li><li>Provide information and materials to these divisions as necessary to ensure adequate and legal documentation.</li><li>Revie and maintain current information manuals for building operations and repair services and maintain accurate equipment and personnel records.</li><li>Act as the Program Manager s principal operations representative.</li><li>Responsible for the management of all O&M functions, including ensuring there are qualified personnel to meet staffing requirements, and the central planning, coordination, control, and actual performance of these functions.</li><li>Manage the O&M and other assigned functions on site to ensure overall contract performance, which requires getting information to and from critical operating/supporting elements and directing/coordinating actions to ensure resources are fully utilized to properly perform the mission.</li><li>Monitor system readiness, identify problem areas, and respond to mission requirements to perform contract requirements.</li><li>Direct and monitor the preventive maintenance program; accept, process, coordinate, and assign work orders, projects, and large task assignments.</li><li>Control resources; monitor staff proficiency and qualifications; monitor staff endurance; monitor the location and activities of assets; and coordinate the flow of information to and from O&M staff.</li><li>Perform additional duties and projects assigned.</li></ul><p>REQUIRED:</p><ul><li>Minimum Acceptable Experience Level: Minimum of 15 years experience in Operations and Maintenance services, with a minimum of 5 years experience in large facilities.</li><li>Knowledge, Skills and Abilities:</li><ul><li>Demonstrated working knowledge of Operations and Maintenance activities for a small plant, overseas, or military facility.</li><li>Demonstrated ability to manage required staff.</li><li>Ability to work in a fast-paced environment requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules.</li><li>Cross-cultural sensitivity with an international perspective.</li><li>Excellent organizational and time management skills.</li><li>Computer skills, specifically in Microsoft Word and Excel.</li><li>Ability to become an active and functioning member of a team.</li><li>Ability to be innovative and be an agent for change.</li><li>Expert communication skills to facilitate and disseminate information.</li></ul></ul><p>Education:</p><ul><li>A high school diploma or GED.</li><li>A bachelor s degree in business management, project management or similar discipline leading to a broad management background is preferred.</li></ul><p>Passport, Licenses and Certifications:</p><ul><li>As part of pre-contingency requirements, by the time the visa process starts , candidates must possess a valid passport with a minimum of 18 months remaining until the expiration date with 8 blank pages.</li><li>Valid drivers license.</li></ul><p>Security Vetting:</p><ul><li>Must be able to obtain and maintain a Secret US Government Clearance.</li><li>Note: US Citizenship is required to obtain Secret Clearance.</li></ul><p>Language Skills:</p><ul><li>Satisfactory English proficiency to meet job requirements and to adhere and comply with safety, health, and security measures.</li></ul><p>Medical:</p><ul><li>Successfully complete and pass the medical and dental examinations as required by Amentum and our customer for deployment to Iraq.</li><li>Must maintain physical and dental requirements for duration of deployment.</li></ul><p>DESIRED:</p><ul><li>Relevant experience, skills and knowledge of electrical, mechanical/HVAC, power generation, water systems for a large facility are strongly preferred.</li><li>Relevant overseas operations management experience.</li><li>Previous out of home country experience and previous work experience in harsh environmental conditions are a plus.</li><li>Experience working with Amentum.</li></ul><p>OTHER RESPONSIBILITIES</p><ul><li>Safety - Amentum enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid/buddy aid responsibilities, participating in emergency response tasks, and serving on safety committees and teams.</li><li>Quality - Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the Amentum Quality Policy and carry out job activities in compliance with applicable Amentum Quality System documents and customer contracts. Each employee must read and understand his/her Quality Management and Customer Satisfaction responsibilities.</li><li>Procedure Compliance - Each employee must read, understand, and implement the general and specific operational, safety, quality and environmental requirements of all plans, procedures and policies pertaining to job.</li></ul><p><br></p><p><strong>Desired Candidate Profile</strong></p><ul><li>Minimum of 15 years experience in Operations and Maintenance services, with a minimum of 5 years experience in large facilities.</li><li>Demonstrated working knowledge of Operations and Maintenance activities for a small plant, overseas, or military facility.</li><li>Demonstrated ability to manage required staff.</li><li>Ability to work in a fast-paced environment requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules.</li><li>Cross-cultural sensitivity with an international perspective.</li><li>Excellent organizational and time management skills.</li><li>Computer skills, specifically in Microsoft Word and Excel.</li><li>Ability to become an active and functioning member of a team.</li><li>Ability to be innovative and be an agent for change.</li><li>Expert communication skills to facilitate and disseminate information.</li><li>A high school diploma or GED.</li><li>A bachelor s degree in business management, project management or similar discipline leading to a broad management background is preferred.</li><li>Valid passport with a minimum of 18 months remaining until the expiration date with 8 blank pages.</li><li>Valid drivers license.</li><li>Must be able to obtain and maintain a Secret US Government Clearance.</li><li>Satisfactory English proficiency to meet job requirements and to adhere and comply with safety, health, and security measures.</li><li>Successfully complete and pass the medical and dental examinations as required by Amentum and our customer for deployment to Iraq.</li><li>Must maintain physical and dental requirements for duration of deployment.</li></ul>
Iraq - Baghdad
<p><h4>Duties</h4>
<p>The LCC/LCC-A site manager will be based at an Amentum site in Iraq and serve the Operations and Maintenance Support Services (OMSS) contract in support of the U.S. Department of State. This position will be responsible for supervising the LCC/LCC-A team in day-to-day operations by assigning projects, coordinating schedules, monitoring performance and quality of workers, and will report to the OMSS program manager. The duties and responsibilities listed below are representative of the nature and level of work assigned and are not necessarily all inclusive.</p>
<ul>
<li>Responsible for maintaining a safe workplace and ensuring that safety is the highest priority in the workplace.</li>
<li>Comply with all Environmental Health & Safety and Quality Assurance requirements and goals. Provide information and materials to these divisions as necessary to ensure adequate and legal documentation.</li>
<li>Receive projects from OMSS COR/ACOR & FAC.</li>
<li>Perform work with considerable independence within established DoS policies, regulations, and technical guidelines.</li>
<li>Oversee the management and implementation of the Program Management Plan.</li>
<li>Oversee the coordination of work priorities and monitoring of methods, procedures, and programs.</li>
<li>Recommend, develop, implement, establish, and enforce procedures and programs to increase efficiency and improve cost effectiveness to the program.</li>
<li>Adhere to company and government processes, regulations, and statutes.</li>
<li>Establish milestones and monitor adherence to master plans and schedules. Identify program problems and obtain solutions, such as allocation of resources or changing contractual specifications.</li>
<li>Direct and coordinate activities to meet goals in terms of performance, objectives/standards, service delivery, quality, and customer satisfaction.</li>
<li>Review work orders and work order reports to ensure the tasks are completed on time and inspect the projects to ensure all work is accomplished per the statement of work.</li>
<li>Confer with staff in order to resolve performance and personnel problems.</li>
<li>Prepare project specific plans and long-range work schedules; delegate specific duties to assigned work crews.</li>
<li>Assist with the implementation of all formal policies and procedures governing site operations.</li>
<li>Submit work order requests as required.</li>
<li>Evaluate the quality and effectiveness of all completed work orders and provide summary feedback both verbally and in writing to the LCC A country manager.</li>
<li>Prepare and submit detailed reports on work completed and on the status of the facility infrastructure systems projects.</li>
<li>Perform additional duties and projects as assigned.</li>
</ul>
<h4>Required</h4>
<p><strong>Minimum acceptable experience level:</strong> Five (5) years’ supervisory experience in at least one of the major construction trades.</p>
<p><strong>Knowledge, skills, and abilities:</strong></p>
<ul>
<li>Possess knowledge of the theories, principles, and practices of project management.</li>
<li>Knowledge of technical information systems.</li>
<li>Ability to demonstrate and provide leadership and collaboration in diverse experiences to address operational methodologies in project planning and management and customer service.</li>
<li>Knowledge of principles and processes involved in supporting contract responsibilities at an overseas facility.</li>
<li>Ability to work in a fast-paced environment which requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules.</li>
<li>Cross-cultural sensitivity with an international perspective.</li>
<li>Excellent organizational and time management skills.</li>
<li>Expert computer skills, specifically in Microsoft Word and Excel.</li>
<li>Ability to become an active and functioning member of a team.</li>
<li>Ability to be innovative and be an agent for change.</li>
<li>Expert communication skills to facilitate and disseminate information.</li>
</ul>
<p><strong>Education:</strong> Bachelor’s degree in construction management or master’s degree in a similar profession is preferred. Verifiable experience managing multiple trades in a large institutional setting or managing construction projects may be considered in lieu of a 4-year degree.</p>
<p><strong>Passport, licenses, and certifications:</strong></p>
<ul>
<li>As part of pre-contingency requirements, by the time the visa process starts, candidates must possess a valid passport with a minimum of 18 months remaining to expiration date with 8 blank pages.</li>
<li>Valid drivers’ license.</li>
<li>Project Management Professional (PMP) certification, current or pursuing, from PMI.</li>
</ul>
<p><strong>Security vetting:</strong> Must be able to obtain and maintain a Secret US Government Clearance. Note: US citizenship is required to obtain a Secret Clearance.</p>
<p><strong>Language skills:</strong> Satisfactory English proficiency to meet job requirements and to adhere and comply with safety, health, and security measures.</p>
<p><strong>Medical:</strong> Successfully complete and pass the medical and dental examinations as required by Amentum and our customer for deployment to Iraq. Must maintain physical and dental requirements for duration of deployment.</p>
<h4>Desired</h4>
<ul>
<li>Knowledge of PowerPoint, Outlook, Project, and Visio.</li>
<li>Previous out of home country experience and previous work experience in harsh environmental conditions are a plus.</li>
<li>Experience working with Amentum.</li>
</ul>
<h4>Other responsibilities</h4>
<ul>
<li><strong>Safety:</strong> Amentum enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid/buddy aid responsibilities, participating in emergency response tasks, and serving on safety committees and teams.</li>
<li><strong>Quality:</strong> Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the Amentum Quality Policy and carry out job activities in compliance with applicable Amentum Quality System documents and customer contracts. Each employee must read and understand his/her Quality Management and Customer Satisfaction responsibilities.</li>
<li><strong>Procedure compliance:</strong> Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to job.</li>
</ul>
<h4>Working and living conditions</h4>
<p>This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environment. Temperatures can reach 120-130 degrees Fahrenheit (50-55 degrees Celsius) during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to Iraq for extended periods.</p>
<p>Work schedules are a minimum of six days per week and ten hours per day, while some jobs have higher daily and weekly minimums. Employees must be willing and able to perform physical activities including, but not limited to, heavy lifting and moving of items, parts, assemblies, and equipment up to the safety regulation maximum; climbing in and out of equipment; crawling; and working outdoors. This includes being able to lift and carry 40 pounds of personal protective equipment for extended periods of time and being capable of running and ‘duck & cover’ during emergencies without putting oneself or others at risk.</p></p><p></p>
Iraq - Basra
<p><strong>Accountant (based in South Iraq)</strong></p><p>Reporting to CFO and Country Manager and/or his/her designate, the duties generally include:</p><p>Ø Manage the accounting functions of branch offices in Iraq to ensure the timely preparation and submission of management accounts, ensure compliance to the statutory requirements and filing of tax returns.</p><p>Ø Prepare statistical reports required by management to make timely business decisions.</p><p>Ø Responsible for weekly bank balance reports for management.</p><p>Ø Ensure the proper accountability of inventory and fixed assets.</p><p>Ø Prepare and submit monthly accounts meeting minutes.</p><p>Ø Ensure all revenues are accurately captured for all on-going jobs.</p><p>Ø Responsible for the calculation/verification and payment of salaries and allowances to office and field engineers and mandatory contributions to local authorities.</p><p>Ø Ensure all renewals relating to the business are timely attended to.</p><p>Ø Ensure a high degree of productivity through proper selection, orientation, training and counselling of accounting staff if necessary.</p><p>Ø Identify weakness in the operating system if any and implement internal control measures.</p><p>> Liaise with auditors, tax consultants, bankers, government authorities, clients and suppliers on related matters.</p><p> </p><p>Skills Required:</p><p>Ø Experience: Minimum 5+ years at management level in the oil and gas industry upstream industry, and preferably from services sector.</p><p>Ø Familiar Navision accounting software</p><p>Ø Knowledge of corporate and secretarial functions</p><p>Ø Familiar with North Iraq and South Iraq statutory requirements</p><p>Ø Handle funds management and banking requirements</p><p>Ø Excellent interpersonal, communication and presentation skills</p><p>Ø Commercial and business awareness</p><p>Ø An analytical approach to work with high numeracy and sound technical skills</p><p>Ø Problem-solving skills and initiative</p><p>Ø Negotiation skills and the ability to influence others</p><p> </p><p>Ø Preferred fluency in written Arabic and English</p><p> </p>
Iraq - Baghdad
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<p>Overview ***This position is physically located in Balad, Iraq*** Under supervision of the Director of Operations, performs a full range of tasks to ensure Vectrus and its subcontractors have a culture of compliance and zero tolerance for Trafficking in Persons (TIPs) in accordance with (IAW) US Public Law (USPL), the Federal Acquisition Regulations (FAR), USG supplements thereto, as well as Local Laws. Manages employee trainings and implementing other management methods as assigned to ensure compliance with regulations and internal controls. Manages team that reviews and enforces compliance with standards or regulations imposed by contract requirements and the company’s internal guidelines. Responsibilities This position description is subject to change at any time as needed to meet the requirements of the program or company. + Applies knowledge of international standards related to exploitative child labor, forced labor, and human trafficking to specific case contexts. International standards include C138; C182; C029; C105; social, political and economic factors contributing to child labor and forced labor; UN Convention on the Rights of the Child; trafficking in persons, in general; Executive Order 13126 – Prohibition of Acquisition of Products Produced by Forced or Indentured Child Labor; Trade and Development Act of 2000; FAR 52.222-50, KSCR1-2 and Trafficking Victims Protection Act. Conducts substantive legal and regulatory research on Human Trafficking & labor issues + Manages a the CTIPS training program and reviews training materials, compliance plans, pay slips, financials and program management practices/policies to ensure compliance to applicable requirements. Responds within 24 hours to allegations, audit findings or requests for investigation, compliance audits or advocacy services for potential victims of human trafficking. Receive, track and manage to closure allegations, requests for information and referrals + Responsible for assessing the productivity, effectiveness, and efficiency of assigned program operations and objectives + Ensures compliance with regulations and controls by examining and analyzing records, reports, operating practices, and documentation; recommending opportunities to strengthen the internal control structure. + Identification of noncompliance’s, and corrective actions; identification of ways to improve the efficiency and effectiveness of policies at both the program and Subcontractor level. + Supports external auditors by coordinating information and logistics support requirements. + Continually develops self-knowledge of issues of compliance, human trafficking, and related laws/ policies; Participates in all assigned or recommended training opportunities. Updates job knowledge by seeking out and participating in educational opportunities and reading professional publications. + Adheres to the confidentiality policy regarding the company, its Subcontractors, as well as potential victims of trafficking. + Performs other duties as assigned. Qualifications + Qualifications + Minimum Qualifications: Education/Certifications: One year related experience may be substituted for one year of education, if degree is required. + High School Diploma; + Be able to obtain ISO 9001:2015 Auditor certification + Experience: + 5 years’ compliance, contract management, subcontract management, safety or quality experience with a minimum of one year auditing experience preferred. + 1 – 2 years in overseas contracting environment highly desirable. + Must have an understanding of DoD Human Trafficking regulations + Skills + Attention to detail and strong communication, analytical, reporting and decision-making skills are among the most important traits a CTIPs Supervisor must have to be successful in this position. The ability to work both individually and in teams is also important. + A Compliance Auditor should be particularly vigilant in following up to ensure that developed plans addressing compliance issues and problems have been implemented. + Proactive, hands-on strategic thinker who is approachable and comfortable working in partnership with all levels of staff; Able to work effectively and productively in a professional team environment; Ability to work independently and exhibits sound and accurate judgment. + Demonstrated flexibility and openness in responding to changing work priorities; Planning and project management skills, and capable of multi-tasking in a dynamic environment; attention to detail and follow-up; Self-motived with excellent organizational skills. Ability to think critically and manage multiple tasks simultaneously; + Accuracy and the ability to communicate clearly and attention to detail are a must. Strong skill in effective verbal and written communications, including active listening skills and skill in presenting audit findings and recommendations. Ability to inspire and motivate participants, and help them overcome barriers. + Ability to interpret statutes, regulations and guidelines + Maintain all organizational and professional ethical standards + Ability to demonstrate sensitivity to the cultural/ethnic diversity of the service population and to be sensitive to the needs of special populations + Working Conditions: + Must be capable of working in an extreme weather conditions with temperatures exceeding 120 degrees Fahrenheit. + Indoor and/or outdoor environment with very adverse and harsh conditions (i.e., hot, dry, dusty, desert environment with average temperatures of 30 degrees in the winter and 130 degrees in the summer months). + Includes some industrial production environment conditions as well. + Physical Requirements: + Light work. Exerting up to 20 pounds of force occasionally, and/or up to 10 pounds of force frequently, and/or a negligible amount of force constantly to move objects. If the use of arm and/or leg controls requires exertion of forces greater than that for sedentary work and the worker sits most of the time, the job is rated for light work. + Work may require heavy lifting, stooping, climbing, prolonged standing, prolonged sitting, and working with or in areas where a potential could exist for exposure to physical, chemical, or biological agents. + Employee use of personal protective equipment (PPE) is required for some situations. PPE includes, but is not limited to, head, foot, torso, respiratory, vision, and hearing protective devices. + Must comply with all Fire and Safety Regulations and post policies At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>
John Wood Group PLC
Iraq - Baghdad
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<p>Wood is recruiting for an Operation Technology Project Manager to join its Iraq business unit focusing on leading OT modernization, obsolescence, and digital transformation projects across gas facilities on 28/28 rotation.</p><br><p>This role is a full-time on-site role in Basra, Iraq with travel requirement.</p><br><br> Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy & Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com<br> <b>Diversity Statement </b><br> We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.<br> </div>
NES Global Talent
Iraq - Baghdad
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
Position: Wells QAQC Team Leader<br> Department: Wells<br> Location: Basra, Iraq<br> Duration: 12 months renewable<br> Rotation: 28/28<br> <strong>Role Synopsis <br> </strong><br> The QAQC Team Leader reports to the Well Engineering Manager. The role will be responsible for the management and coordination of the Wells QAQC team. The emphasis of this position is to ensure the growing demand for QAQC is met and managers are informed, along with the development of local workforce. This role is integral to our strategy of building and maintaining robust technical and management standards and furthering the commitment to advancing Iraq’s technical infrastructure and expertise to an international level of excellence.<br> <br> The functions to be managed by this position include but are not limited to: QAQC of local machine shops, all premium connections, make up and pressure testing of critical well components, fabrication and other sub-contractor systems and process, failure investigation for the contractor’s equipment, QMS audit for service suppliers, coordination of TPI’s and Support operational requirements where required. Technical evaluation of QAQC criteria for Wells related tenders.<br> <br> <strong>Key roles and responsibilities include:<br></strong><br> o Proactively Lead the QAQC Team by example with a strong commitment to HSSE, efficiency, practicality, and training of skillsets to Iraqi nationals.<br> o Help develop, implement and maintain the minimum standards for all Wells local and international contractors.<br> o Track and document QA Team and their daily activities and site visits including daily reporting.<br> o Manage and supervise local 3rd party inspection contractors during Drill Stem & BHA inspection (DS-1 cat 4 & 3-5).<br> o Manage the development of tiered multi-level QAQC check lists and verification tools.<br> o Ensure contractor delivery to international and contract standards by managing scheduled tiered multi-level field, facility and procedure & data QAQC audits.<br> o Schedule follow up reviews and tracking of QAQC action items to close.<br> o Manage and maintain NCR Log and close out actions with the Wells Team<br> o Perform trouble shooting, root cause analysis and incident investigation reports.<br> o Plan, deliver and assess periodic formal training on specialist subjects and quality control measures to Iraqi staff.<br> o Assign responsibilities and tasks to expat and national team members dependent on skill sets, experience, and knowledge.<br> o To liaise and facilitate feedback on QAQC and technical issues with the Wells department and PSCM managers.<br> o Review Tender documents for quality compliance.<br> o Arrange and facilitate contractor performance improvement meetings as and when required.<br> o To champion the application of new technology, international standards (API, ISO, IADC) and best practices as appropriate.<br> o Ensure on-going QAQC audits are tracked, reports are on T drive and actions are closed out.<br> o Review all QAQC reports and issue to relevant manager.<br> o Contract account manager (CAM) for local and international TPI contracts. This includes the coordination and management of these TPI contracts.<br> o Work closely with Integrity and Audit TLs to support the requirements of the Wells organisation.<br> o Technical focal point for OCTG, tubing refurbishment and local API machine shop contracts. Technical input to wellhead contracts.<br> o Coordinate and liaise with TPI teams (both local and international).<br> o Lead preparation and technical evaluation of QAQC criteria for Wells tenders. Provide support to PSCM/discipline engineers for preparation, execution and management of tenders and contracts.<br> o Provide additional technical input and support to various wells teams when required.<br> <br> <strong>Leadership and Behavioural Traits <br> </strong><br> o Strong leadership skills, demonstrated in the leadership of operating teams.<br> o Lead by example with a hands-on approach with regular rig and vendor visits.<br> o A proven ability to coach, train and mentor local & international staff in best industry practices.<br> o A strong team player with self-motivation skills and the ability to work independently is essential.<br> o Proactively practises and passes on values for Safety, Respect, Excellence, Courage and One Team: including Code of Conduct.<br> o Informed Judgment: Uses good practice and sound judgement to deliver safe and competitive operations. Knows when to escalate issues or request help.<br> o Commitment and Engagement: Inspires deep personal commitment in others about delivering the plan focused on continuous improvement.<br> <br> <strong>Criteria & Qualifications <br> </strong><br> o Proven record of strong execution and delivery in a similar role.<br> o A minimum of 15yrs oil industry experience in different roles, including minimum 5yrs in supervisor or management position. Experience working within Wells teams would be considered beneficial.<br> o Strong knowledge of QAQC and management systems.<br> o Strong knowledge of DS-1 and its implementation and use.<br> o Sound Knowledge of NDT processes and types. (MPI, UT, LPI etc)<br> o Strong knowledge of API standards and implementation.<br> o Familiar with surface wellhead systems. Strong knowledge preferred.<br> o IRCA lead auditor qualification.<br> o Excellent interpersonal skills. Fluent in English language written and spoken with strong communication skills is essential.<br> o Must be computer literate and have ability to operate MS Office applications.<br> o Educated to at least first-degree level (or equivalent) in Engineering, or related disciplines.<br> o Maintains a high standard of business integrity, professional behaviour and confidentiality.<br> o Experience of working in Middle East land-based environments is preferred.<br> o A flexible approach to daily work and tasks is essential.<br>With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil & Gas, Power & Renewables, Chemicals, Construction & Infrastructure, Life Sciences, Mining and Manufacturing sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients. <br><br> </div>
EHIF
Iraq - Baghdad
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<p>Wood is recruiting for a Rotating Mechanical Engineer to join its Iraq business unit focusing on developing and implementing preventive and predictive maintenance programs for rotating equipment.</p><br><p>This role is a full-time on-site role in Basra, Iraq with travel requirement.</p><br><p><strong>Reports to:</strong> Construction Manager</p><br><br> Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy & Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com<br> <b>Diversity Statement </b><br> We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.<br><br>Responsibilities:<br><p>Wood is recruiting for a Rotating Mechanical Engineer to join its Iraq business unit focusing on developing and implementing preventive and predictive maintenance programs for rotating equipment.</p><br><p>This role is a full-time on-site role in Basra, Iraq with travel requirement.</p><br><p><strong>Reports to:</strong> Construction Manager</p><br><p><i><strong>#Wood #Iraq #Basra #Rotating Mechanical Engineer</strong></i></p><br><p><strong><u>The role</u></strong></p><br><p>This is an exciting opportunity for an experienced Rotating Mechanical Engineer to join our Iraq Business Unit.</p><br><p><strong>Our Clients and Projects </strong></p><br><p><strong>Designing the future. Transforming the world. </strong></p><br><p>Wood is an integral part of operations in Iraq, and we are continuing to grow our footprint across the country. With a 90-year heritage, 10 major contracts and over 850 employees, we have the skills, expertise and asset knowledge to support clients to deliver energy security and decarbonisation ambitions.</p><br><p>Wood excels in supporting our clients to deliver complex upstream and midstream oil and gas projects in Iraq delivering maintenance, modifications and engineering solutions. We are committed to decarbonising existing assets, producing cleaner energy and developing a sustainable national workforce, ensuring the long-term growth of the region.</p><br><p><strong><u>What we can offer</u></strong></p><br><ul> <li><strong>Meaningful and interesting projects</strong> Delivered to high profile clients and complex projects in Iraq </li> <li><strong>Commitment to Diversity and Inclusion</strong>; we are an organisation actively committed to diversity and inclusion across our business with employee networks committed to giving all employees a voice </li> <li><strong>Competitive salary</strong> with regular salary reviews to ensure we are rewarding at the right level in line with the market </li> <li><strong>Medical Insurance: </strong>Ensures inpatient and outpatient medical care is available should you require treatment. </li> <li><strong>Commitment to continued professional development;</strong> development plans that are tailored to your individual needs and interests </li> <li><strong>Global connections</strong>: join experts around the world who are at the leading edge of our industry, shaping the standards of our profession </li> <li><strong>Long Service Award: </strong>Wood values the commitment and loyalty of our people. Celebrating Long Service provides an opportunity for the business to demonstrate their appreciation of the hard work, dedication and many years’ services of our employees at 5-year service milestones </li></ul><p><strong><u>Job Objectives:</u></strong></p><br><ul> <li><span>Develop and implement preventive and predictive maintenance programs for rotating equipment.</span></li> <li><span>Lead root cause failure analysis (RCFA) and implement corrective actions.</span></li> <li><span>Monitor equipment performance and recommend improvements to enhance reliability and efficiency.</span></li> <li><span>Support condition monitoring activities (vibration analysis, thermography, oil analysis).</span></li> <li><span>Provide technical expertise during troubleshooting, overhauls, and major repairs.</span></li> <li><span>Review maintenance procedures, work packs, and job safety analyses (JSAs).</span></li> <li><span>Ensure compliance with OEM specifications, industry standards (API, ISO), and company procedures.</span></li> <li><span>Prepare maintenance plans, schedules, and spare parts lists for rotating equipment.</span></li> <li><span>Maintain accurate records of maintenance history, failure reports, and performance data.</span></li> <li><span>Support the development of equipment criticality assessments and risk-based maintenance strategies.</span></li> <li><span>Liaise with operations, planning, procurement, and engineering teams to ensure maintenance activities are aligned with production goals.</span></li> <li><span>Participate in HAZOPs, MOCs, and technical audits.</span></li> <li><span>Support audits, inspections, and regulatory compliance efforts.</span></li> <li><span>Provide rotating equipment expertise during facility shutdowns, turnarounds, and brownfield projects.</span></li> <li><span>Ensure that all work complies with health, safety, and environmental standards at West Qurna 1.</span></li> <li><span>Support the application of WQ1-FOD Policy in relation to the Drug and Alcohol policy, Company Ethics, Award conditions, etc, whilst respecting and protecting the personal rights of subordinates.</span></li></ul><br>Qualifications:<br><p><strong>What makes you remarkable? </strong></p><br><p>At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world’s most critical challenges. </p><br><p><strong>Expected:</strong></p><br><ul> <li><span>Bachelor’s degree in Mechanical Engineering or a related discipline.</span></li> <li><span>Minimum of 10 years’ experience specifically in Rotating Equipment Maintenance, preferably in oil & gas and petrochemical sector.</span></li> <li><span>Certifications in vibration analysis (Category I/II) or RCA Training is a plus.</span></li> <li><span>Knowledge on the International Standard related to Mechanical, such as API 610, API 617, ANSI B73.1, ISO 5199, ISO 10816, etc.</span></li></ul><p><span><strong>Skills:</strong></span></p><br><ul> <li><span>Language English and Arabic Proficiency.</span></li> <li><span>Proficiency in reading and interpreting engineering drawings and specifications.</span></li> <li><span>Strong knowledge of rotating machinery design, operation, and maintenance.</span></li> <li><span>Strong knowledge of condition monitoring tools and analysis techniques.</span></li> <li><span>Good awareness in Safety Operations, Risk Assessment, and Best Practice Engineering.</span></li> <li><span>Problem Solving</span></li> <li><span>Excellent Communication and interpersonal skills.</span></li> <li><span>Understand and follow oral and written instructions; prepare clear and concise records, reports and other written materials.</span></li> <li><span>Continuous Improvement</span></li> <li><span>Ability to interact in a multi-cultural environment</span></li> <li><span>Demonstrated experience in liaising with third party contractors, business partners and local communities</span></li></ul><p><span><strong>Systems:</strong></span></p><br><ul> <li><span>Maximo / CMMS / Aconex</span></li> <li><span>Microsoft Offices</span></li></ul> </div>
INTECH
Iraq - Baghdad
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<p>INTECH Process Automation is looking for an experienced <strong>Materials Coordinator </strong>to join our <strong>Operations & Maintenance (O&M) team</strong>. The successful candidate will be responsible for controlling <strong>materials, spares, and equipment</strong> from receipt through storage, preservation, issuance, return, and reconciliation. Ensure proper <strong>segregation, traceability, documentation, inventory accuracy, and timely availability</strong> for approved work activities.</p><br><p><strong>Key Responsibilities:</strong></p><br><ul><li>Coordinate <strong>receipt, inspection, identification, and documentation</strong> of materials, equipment, and spare parts.</li><li>Verify received materials against <strong>purchase orders, delivery documents, specifications, quantities, and inspection status</strong>.</li><li>Maintain appropriate <strong>quarantine, accepted, rejected, and released material segregation</strong>.</li><li>Control storage and preservation of materials in accordance with <strong>manufacturer and Company requirements</strong>.</li><li>Maintain accurate <strong>inventory records, stock balances, locations, and material status</strong>.</li><li>Issue materials and spares against <strong>approved material requests, work orders, or authorized requirements</strong>.</li><li>Process and track <strong>material returns, unused items, damaged materials, and surplus stock</strong>.</li><li>Maintain full <strong>material traceability</strong>, including tags, certificates, batch/heat numbers, serial numbers, and relevant documentation.</li><li>Monitor <strong>critical, long-lead, warranty, shelf-life, and preservation-sensitive items</strong>.</li><li>Coordinate with <strong>Procurement, Expediting, QA/QC, Warehouse, Maintenance, Engineering, Logistics, and Company</strong>.</li><li>Update and maintain <strong>CMMS/ERP material records, inventory transactions, and supporting documentation</strong>.</li><li>Monitor stock levels and identify <strong>shortages, excesses, obsolete items, and replenishment requirements</strong>.</li><li>Maintain <strong>warranty records, certificates, inspection status, and material dossiers</strong> as applicable.</li><li>Conduct or support <strong>inventory counts, reconciliation, stock verification, and discrepancy investigation</strong>.</li><li>Ensure materials are handled and stored safely and comply with <strong>HSE, preservation, housekeeping, and Company requirements</strong>.</li></ul> </div>
INTECH
Iraq - Baghdad
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<p>INTECH Process Automation is seeking an experienced <strong>Security Coordinator</strong> to join our Operations & Maintenance (O&M) team. The selected candidate will be Responsible for providing <strong>Arabic-language security coordination and liaison</strong> for site activities, supporting access control, personnel documentation, authority coordination, and communication between <strong>Company, contractors, site stakeholders, and Arabic-speaking personnel</strong>.</p><br><p><strong>Key Responsibilities:</strong></p><br><ul><li>Coordinate daily <strong>personnel, vehicle, visitor, and equipment access</strong> in accordance with site security requirements.</li><li>Prepare and maintain <strong>access lists, security passes, badges, permits, and authorization records</strong>.</li><li>Coordinate mobilization and demobilization of <strong>personnel, vehicles, equipment, and contractors</strong>.</li><li>Verify access requirements against approved <strong>personnel lists, work scopes, and site authorizations</strong>.</li><li>Maintain accurate <strong>security registers, access records, visitor logs, vehicle records, and databases</strong>.</li><li>Coordinate with <strong>Company Security, Operations, HSE, HR, Logistics, Contractors, and Project teams</strong>.</li><li>Support issuance, renewal, cancellation, and control of <strong>security passes and site access credentials</strong>.</li><li>Coordinate security arrangements for <strong>deliveries, material movements, special activities, shutdowns, and project mobilization</strong>.</li><li>Identify and resolve <strong>access restrictions, documentation gaps, expired passes, and security-interface issues</strong>.</li><li>Monitor daily access status and escalate <strong>unauthorized access attempts or security concerns</strong>.</li><li>Support <strong>personnel accountability, muster information, emergency access, and security-related communications</strong>.</li><li>Prepare <strong>daily/weekly security reports, access summaries, registers, and status updates</strong>.</li><li>Maintain controlled security documentation and ensure records are <strong>accurate, current, and traceable</strong>.</li><li>Support security incident reporting and coordinate required follow-up with<strong> Security</strong>.</li><li>Comply with the<strong> Security procedures, site rules, HSE requirements, confidentiality, and applicable regulations</strong>.</li></ul> </div>
Weatherford International Oil Field Services
Iraq - Baghdad
<p><br></p><p><br></p><p>Your day-to-day could include: </p><p><br></p><p>Prepare, deploy, and operate advanced downhole tools to meet specific wellsite objectives</p><p>Utilize cutting-edge simulation software to design and optimize wellsite solutions tailored to client needs</p><p>Analyse performance data and recommend improvements </p><p>Manage equipment logistics and ensure seamless setup and operation at the rig site</p><p>Create detailed post-job reports and share actionable insights with clients and internal teams</p><p>Champion a culture of continuous improvement with a strong focus on safety, quality, and performance</p><p>Deliver front-line engineering support to our customers throughout operations, resolving issues independently</p><p> </p><p><br></p><p>What We’re Looking For </p><p><br></p><p>Graduated with bachelor’s degree in engineering (all fields) within the last 24 months</p><p>No more than 1 year of experience</p><p>English language fluent proficiency (written and spoken)</p><p>Strong communication and interpersonal skills</p><p>Ability to analyse complex problems, apply critical thinking, and make informed decisions</p><p>A passion for hands-on work and learning in dynamic environments (onshore and offshore)</p><p> </p><p><br></p><p>What to Expect </p><p><br></p><p>This role is physically and mentally demanding. You’ll work 12-hour shifts (day or night), often in tough weather conditions. You may be away from home for extended periods, including weekends and holidays. But if you’re up for the challenge, the rewards are big. </p><p><br></p><p>You’ll join one of our specialized product lines, such as: </p><p><br></p><p>Completions </p><p>Drilling Services </p><p>Wireline Services </p><p>Artificial Lift </p><p>Well Services </p><p>Managed Pressure Drilling</p><p><strong>Desired Candidate Profile</strong></p><ul><li><br></li></ul>
Confidential
Iraq - Baghdad
<section><p class="heading jdMain">Job Description</p><p class="heading">Roles & Responsibilities</p><div class="paragraph"><p>The Disposal Yard Specialist will be based at Amentum Baghdad Embassy Compound [BEC] in Baghdad, Iraq, and serve the Base Life Support Services contract in support of the State Department. This position will report to the Disposal Yard Manager. The duties and responsibilities listed below are representative of the nature and level of work assigned and are not necessarily all inclusive.</p><p>DUTIES:</p><ul><li>Responsible for maintaining a safe workplace and ensuring that safety is the highest priority in the workplace.</li><li>Comply with all Environmental Health & Safety and Quality Assurance requirements and goals.</li><li>Provide information and materials to these divisions as necessary to ensure adequate and legal documentation.</li><li>Ensures data accuracy and update of equipment inventory database.</li><li>Ensure that related data processing activities meet the requirements.</li><li>Process excess turn-in documentation for all controlled and non-controlled excess equipment and materials.</li><li>Review, reconcile, adjust and process all inventory transactions.</li><li>Process Survey Reports for all missing equipment.</li><li>Process and coordinate Equipment Transfers.</li><li>Perform positive verbal and written communication skills with all internal and external customers.</li><li>Assist in a broad scope of direct and indirect support activities involving customer owned equipment as necessary to complete assigned tasks.</li><li>Perform additional duties and projects as assigned.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Minimum Acceptable Experience Level: Minimum of 3 years experience supporting a DOD or DOS program Exposure, at least two (2) years of international experience.</li><li>Knowledge, Skills, and Abilities:</li><li>Prior proven experience in Property Disposal operations with Defense Reutilization Management Operations (DRMO), Hazmat experience.</li><li>Experience operating heavy equipment to include up to a 30K Forklift, Extended reach Forklift, Material Handler, Grappler (Excavator), Front End Loader and Material Shredders.</li><li>Experience with cutting torches to include Plasma cutters.</li><li>Commitment to maintaining a high performance team which delivers customer service excellence.</li><li>Knowledge of principles and processes involved in supporting contract responsibilities at an overseas facility.</li><li>Ability to work in a fast-paced environment that requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules.</li><li>Cross-cultural sensitivity with an international perspective.</li><li>Excellent organizational and time management skills.</li><li>Computer skills, specifically in Microsoft Word and Excel.</li><li>Ability to become an active and functioning member of a team.</li><li>Ability to be innovative and be an agent for change.</li><li>Expert communication skills to facilitate and disseminate information.</li><li>Education: A high school diploma or GED (General Education Diploma), Bachelor s Degree in related field fifteen (15) yeas of related experience.</li><li>Passport, Licenses and Certifications:</li><li>As part of pre-contingency requirements, by the time the visa process starts , candidates must possess a valid passport with a minimum of 18 months remaining to expiration date with 8 blank pages.</li><li>Valid drivers license</li><li>Security Vetting: Already possess a US Government issued security clearance or be able to obtain a favorable US Government clearance prior to being hired is required for the position. Must maintain eligibility at the required certification or clearance level for the duration of the contract.</li><li>Language Skills: Satisfactory English proficiency to meet job requirements and to adhere and comply with safety, health, and security measures.</li><li>Medical: Successfully complete and pass the medical and drug examinations as required by Amentum and our customer for deployment to Iraq. Must maintain physical and drug requirements for duration of deployment.</li><li>Previous out of home country experience and previous work experience in harsh environmental conditions are a plus.</li><li>Department of State experience.</li><li>Five to seven years of international experience in challenging locations, preferably working in the Middle East, with a working knowledge of customs and cultural differences.</li><li>Experience working with Amentum-PAE.</li><li>Knowledge of the principles and processes involved in Quality Control Management.</li><li>Successful management of multiple sites in geographically dispersed locations.</li><li>Ability to collect, analyze and summarize data and to prepare clear and concise reports.</li><li>Experience in effectively dealing with international and headquarters staff, and sensitivity to other cultures.</li><li>Exercise sound judgment and make decisions independently.</li><li>Excellent organizational and time management skills, with the ability to handle multiple tasks and administrative details in a fast paced and constantly changing environment. Expert communication skills to facilitate and disseminate information.</li></ul><p></p></section>
Ernst & Young AE
Iraq - Baghdad
<section><p class="heading jdMain">Job Description</p><p class="heading">Roles & Responsibilities</p><div class="paragraph"><p><br></p>
<p> <strong> </strong> </p>
<p> <strong> </strong> </p>
<p> <strong>The opportunity </strong> </p>
<p> <strong> </strong> </p>
<p>To support the significant growth of our Technology Risk service in MENA, EY is looking to hire highly qualified resources. Specifically, as part of this job posting, we are looking for a Senior Consultant / Assistant Manager. Working across many different industries, this role will be responsible for executing and leading IT and cybersecurity projects. It is all about listening to our clients, asking the better questions, and supporting them in areas where there are no off-the-shelf solutions.</p>
<p> </p>
<p> <strong>Your key responsibilities </strong> </p>
<p> <strong> </strong> </p>
<p>A large part of the role will be engagement delivery and EY will expect the candidates to lead and deliver engagements with very minimal supervision. EY also expects the candidates to support executives in development of proposals, presentations and other business development activities. The candidate will be responsible for the delivery and quality of the final reports to EY's clients. </p>
<p>An existing track record of successful engagement delivery in Technology Risk is expected of all candidates for this role. A Big 4 background or comparable consulting experience is highly advantageous. A broad background across IT and Cybersecurity is expected with specific experience in the following areas:</p>
<ul>
<li>Expertise in Risk and Governance Frameworks, including IT governance frameworks (e.g., COBIT, ITIL, NIST), ISO 27001 standards, information security principles, policy development, and risk assessment.</li>
<li>Proficiency in IT Systems Audit, encompassing planning, execution, audit methodologies, complex IT environment evaluation, control weakness identification, and effective communication of findings.</li>
<li>Comprehensive knowledge of internal controls over financial reporting (ICFR), covering ITGCs, ITACs, SOX requirements, supporting financial audits with IT expertise, and strong liaison skills with financial auditors.</li>
<li>Good understanding around the application systems such as SAP, Oracle, Microsoft Dynamics and operating systems and databases.</li>
<li>Strong understanding of Business Continuity Planning (BCP), including BCP/DRP principles, business impact analyses, recovery strategy development, and plan testing.</li>
<li>Strong understanding of cybersecurity fundamentals, including common threats, vulnerabilities, basic principles, and contributions to cybersecurity discussions.</li>
<li>General Skills: Excellent analytical, problem-solving, communication, presentation, project management, organizational, leadership, client service, and business development skills.</li>
</ul>
<p> </p>
<p> <strong>Skills and attributes for success </strong> </p>
<p> </p>
<ul>
<li>Bachelor's degree in Information Technology, Cybersecurity, Computer Science, or in a related field.</li>
<li>Relevant professional certifications (e.g., CISA, CISSP, CISM, ISO 27001 Lead Auditor) are preferred.</li>
<li>Minimum of 3 to 5 years of experience in IT audit, information security, or related fields.</li>
<li>Strong knowledge of ITGC/ITAC, information security frameworks, and cybersecurity best practices.</li>
<li>Excellent analytical, problem-solving, and communication skills.</li>
<li>Ability to work independently and collaboratively within a team environment.</li>
</ul>
<p> </p>
<p><br></p>
<p> <strong> </strong> </p>
<p> <strong> </strong> </p></div></section>
KBR Inc.
Iraq - Baghdad
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<p><b>Title:</b></p><br><br>Area Authority (AAD)<br><br><p><b>Planning and Risk Assessment</b>:</p><br><br><p>Conduct a detailed discussion with the Performing Authority (PA) during the work planning stage to ensure all hazards are identified. Verify that an appropriately detailed Risk Assessment is completed to reduce risks to an acceptable level (ALARP). Ensure the quality of the CoW documentation by checking that the content is accurate and supplementary certificates are approved and attached.</p><br><br><br><p><b>Worksite Visits and Monitoring</b>:</p><br><br><p>Visit the worksite with the PA to prepare the Hazard Identification and Risk Assessment (HITRA), ensuring the PA understands the location, equipment, activities, hazards, and related controls. Attend the worksite on the initial issue of the permit, participate in toolbox talks, and authorize the work to start. Perform regular monitoring checks during each shift, particularly within the first hour of the permit's issuance.</p><br><br><br><p><b>Energy Isolation and Safety Controls:</b></p><br><br><p>Approve the design of energy isolation and oversee the implementation of energy isolation measures prior to the issuance of work permits. Confirm that energy isolation is in place before task initiation and demonstrate the isolation to the PA. Confirm positive isolation for Hot Work,, and Confined Space Entry tasks. Liaise with the station SAEP to ensure that all work with electrical content is reviewed, and all associated electrical certificates and risk assessments are in place. Authorises sanction to test on agreed isolations and points Maintains station isolation register, monitoring work scopes and removing isolation when required or transferring to LTI.</p><br><br><br><p><b>Permit Closure and Worksite Safety:</b></p><br><br><p>Close permits by signing to confirm that work is completed, ensuring that the worksite is left safe, clean, and tidy. Ensure that energy isolation is removed after work completion and the cancellation of the permit.</p><br><br><br><p><b>Shift Handover: </b></p><br><br><p>Conduct a thorough handover regarding ongoing tasks during shift changes with the oncoming AA, ensuring continuity and safety.</p><br><br><br><p><b>SIMOPS Coordination:</b></p><br><br><p>Ensure that work can proceed safely with no significant impact from or to SIMOPS.</p><br><br><br><p><b>Daily Meetings and Continuous Improvement:</b></p><br><br><p>Attend daily permit/SIMOPS meetings to provide detailed work scopes to support the Site Manager (SM). Capture any lessons learned from the CoW process within WorkSafe and conduct self-verification audits.</p><br><br><br><br><br> </div>
KBR Inc.
Iraq - Baghdad
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<p><b>Title:</b></p><br><br>CoW Advisor<br><br><p>Planning and Risk Assessment: Conduct a detailed discussion with the Performing Authority (PA) during the work planning stage to ensure all hazards are identified. Verify that an appropriately detailed Risk Assessment is completed to reduce risks to an acceptable level (ALARP). Ensure the quality of the CoW documentation by checking that the content is accurate and supplementary certificates are approved and attached. Worksite Visits and Monitoring: Visit the worksite with the PA to prepare the Hazard Identification and Risk Assessment (HITRA), ensuring the PA understands the location, equipment, activities, hazards, and related controls. Attend the worksite on the initial issue of the permit, participate in toolbox talks, and authorize the work to start. Perform regular monitoring checks during each shift, particularly within the first hour of the permit's issuance. Energy Isolation and Safety Controls: Approve the design of energy isolation and oversee the implementation of energy isolation measures prior to the issuance of work permits. Confirm that energy isolation is in place before task initiation and demonstrate the isolation to the PA. Confirm positive isolation for Hot Work,, and Confined Space Entry tasks. Liaise with the station SAEP to ensure that all work with electrical content is reviewed, and all associated electrical certificates and risk assessments are in place. Authorises sanction to test on agreed isolations and points Maintains station isolation register, monitoring work scopes and removing isolation when required or transferring to LTI. Permit Closure and Worksite Safety: Close permits by signing to confirm that work is completed, ensuring that the worksite is left safe, clean, and tidy. Ensure that energy isolation is removed after work completion and the cancellation of the permit. Shift Handover: Conduct a thorough handover regarding ongoing tasks during shift changes with the oncoming AA, ensuring continuity and safety. SIMOPS Coordination: Ensure that work can proceed safely with no significant impact from or to SIMOPS. Daily Meetings and Continuous Improvement: Attend daily permit/SIMOPS meetings to provide detailed work scopes to support the Site Manager (SM). Capture any lessons learned from the CoW process within WorkSafe and conduct self-verification audits.</p><br><br><br><br><br> </div>
Iraq - Basra
<p><h4>Job description</h4>
<p><strong>Male gym supervisor (IFMS – KBR operated oil & gas site)</strong></p>
<p><strong>Contract:</strong> Integrated Facilities Management Services (IFMS)<br>
<strong>Employer:</strong> KBR (or KBR-appointed IFMS subcontractor)<br>
<strong>Client:</strong> KBR<br>
<strong>Location:</strong> Remote / camp-based oil & gas asset<br>
<strong>Reporting to:</strong> KBR IFMS FM manager / FM deputy manager</p>
<h4>Job purpose</h4>
<p>The physical training centre supervisor is responsible for the safe, compliant, and effective management of the physical training and fitness facility under the KBR IFMS contract, ensuring full alignment with:</p>
<ul>
<li>KBR HSSE management system</li>
<li>Applicable local regulatory requirements</li>
</ul>
<p>The role supports workforce health, wellbeing, and fatigue management while reinforcing IFMS Goal Zero, Life-Saving Rules, and KBR’s Beyond Zero safety culture.</p>
<h4>Key responsibilities</h4>
<p><strong>1. HSSE leadership & compliance</strong></p>
<ul>
<li>Demonstrate visible HSSE leadership in line with KBR Zero Harm</li>
<li>Ensure strict compliance with:
<ul>
<li>Life-Saving Rules</li>
<li>MFDS Permit to Work (PTW) and isolation requirements (where applicable)</li>
<li>KBR and IFMS HSSE procedures</li>
</ul>
</li>
<li>Develop, implement, and maintain:
<ul>
<li>Risk assessments (RA)</li>
<li>Task risk assessments (TRA)</li>
<li>Job safety analyses (JSA) for all fitness activities</li>
</ul>
</li>
<li>Ensure emergency preparedness including:
<ul>
<li>First aid and AED readiness</li>
<li>Clear emergency response procedures within the facility</li>
</ul>
</li>
<li>Report and investigate:
<ul>
<li>Incidents</li>
<li>Near misses</li>
<li>Unsafe acts and conditions</li>
</ul>
using KBR approved reporting systems
</li>
<li>Support and participate in:
<ul>
<li>HSSE audits</li>
<li>Site inspections</li>
<li>Assurance and compliance reviews</li>
</ul>
</li>
</ul>
<p><strong>2. Facility operations & asset integrity</strong></p>
<ul>
<li>Manage daily operations of the physical training centre, including:
<ul>
<li>Gymnasium</li>
<li>Functional training spaces</li>
<li>Games areas (inside and outside)</li>
<li>Stretching and group exercise areas</li>
<li>Swimming and sauna areas</li>
</ul>
</li>
<li>Ensure the facility is:
<ul>
<li>Clean, hygienic, and orderly</li>
<li>Safe, ventilated, and fit for purpose</li>
<li>Operated within approved capacity</li>
</ul>
</li>
<li>Conduct and record daily, weekly, and monthly equipment inspections</li>
<li>Coordinate planned preventive maintenance (PPM) and corrective maintenance through maintenance teams</li>
<li>Ensure fitness equipment is certified, serviceable, and used in accordance with manufacturer requirements, including pool maintenance</li>
<li>Control access and prevent misuse of equipment</li>
</ul>
<p><strong>3. Fitness programmes & user safety</strong></p>
<ul>
<li>Deliver or supervise fitness programmes suitable for:
<ul>
<li>Shift workers</li>
<li>Rotational personnel</li>
<li>Physically demanding roles</li>
</ul>
</li>
<li>Conduct mandatory gym inductions for all users</li>
<li>Ensure users are briefed on:
<ul>
<li>Safe exercise techniques</li>
<li>Personal responsibility for fitness activities</li>
</ul>
</li>
<li>Support injury prevention, mobility, and fatigue management initiatives</li>
<li>Coordinate with:
<ul>
<li>Site ISOS medical team</li>
<li>KBR HSSE team</li>
</ul>
for wellness, rehabilitation, or return-to-work support
</li>
</ul>
<p><strong>4. Supervision & IFMS administration</strong></p>
<ul>
<li>Supervise gym attendants, fitness instructors, or subcontracted staff (if applicable)</li>
<li>Enforce discipline, behavioral standards, and professional conduct aligned with:
<ul>
<li>KBR code of conduct</li>
<li>KBR values and ethics</li>
</ul>
</li>
<li>Maintain accurate records for:
<ul>
<li>User inductions</li>
<li>Attendance</li>
<li>Equipment inspections</li>
<li>HSSE documentation</li>
</ul>
</li>
<li>Provide input to monthly IFMS reports and KPIs including:
<ul>
<li>Facility utilization</li>
<li>HSSE observations</li>
<li>Incidents / near misses</li>
<li>Equipment availability</li>
</ul>
</li>
<li>Deliver toolbox talks and participate in KBR HSSE meetings as required</li>
<li>Prepare fitness programs, welfare event calendars, and manage sports events</li>
</ul>
<p><strong>5. Client & stakeholder interface</strong></p>
<ul>
<li>Act as the primary interface for fitness facility matters between:
<ul>
<li>KBR IFMS staff</li>
<li>KBR HSSE and site services providers</li>
<li>Site medical team</li>
</ul>
</li>
<li>Address client observations, workforce feedback, and corrective actions</li>
<li>Support field wellbeing campaigns and continuous improvement initiatives</li>
<li>Represent KBR IFMS in a professional and client-focused manner at all times</li>
</ul>
<h4>Qualifications & certifications</h4>
<p><strong>Essential</strong></p>
<ul>
<li>Formal qualification in:
<ul>
<li>Physical training</li>
<li>Sports science</li>
<li>Physical education</li>
<li>Fitness instruction</li>
</ul>
</li>
<li>Certified fitness instructor / personal trainer</li>
<li>Valid first aid, CPR, and AED certification or medical experience</li>
</ul>
<p><strong>Desirable</strong></p>
<ul>
<li>NEBOSH IGC / IOSH Managing Safely or equivalent</li>
<li>Experience working under KBR IFMS contracts</li>
<li>Prior experience on Majnoon or IOC operated sites</li>
<li>Mental health or wellbeing programme awareness</li>
</ul>
<h4>Experience</h4>
<ul>
<li>Minimum 3–5 years’ experience supervising a fitness or training facility</li>
<li>Experience in remote, industrial, or high-risk environments</li>
<li>Oil & gas, EPC, EPCM, or construction camp experience preferred</li>
</ul>
<h4>Competencies & behaviours</h4>
<ul>
<li>Strong HSSE awareness with proactive hazard identification</li>
<li>Demonstrates Shell and KBR safety leadership behaviours</li>
<li>High personal integrity and professionalism</li>
<li>Effective communicator with multicultural teams</li>
<li>Organised, resilient, and capable of working independently</li>
<li>Physically fit and able to safely demonstrate training techniques</li>
</ul>
<h4>Working conditions</h4>
<ul>
<li>Remote onshore oil & gas location</li>
<li>Rotational schedule (e.g. 28/28)</li>
<li>Camp accommodation</li>
<li>Hot and dusty environmental conditions</li>
<li>Flexible hours to support shift patterns</li>
</ul>
<h4>HSSE & performance expectations</h4>
<ul>
<li>Zero harm mindset</li>
<li>Full compliance with:
<ul>
<li>KBR HSSE management system</li>
<li>IFMS contract obligations</li>
</ul>
</li>
<li>Immediate intervention for unsafe acts or conditions</li>
<li>Continuous improvement focus</li>
</ul></p><p></p>
Iraq - Basra
<p><h4>Job description</h4>
<p>Female physical training centre supervisor (IFMS – KBR operated oil & gas site)</p>
<p><strong>Job title</strong><br>
Physical training centre supervisor</p>
<p><strong>Contract</strong><br>
Integrated facilities management services (IFMS)</p>
<p><strong>Employer</strong><br>
KBR (or KBR appointed IFMS subcontractor)</p>
<p><strong>Client</strong><br>
Shell</p>
<p><strong>Location</strong><br>
Remote / camp based oil & gas asset</p>
<p><strong>Reporting to</strong><br>
KBR IFMS FM manager / FM deputy manager</p>
<p><strong>Job purpose</strong><br>
The physical training centre supervisor is responsible for the safe, compliant, and effective management of the female physical training and fitness facility under the KBR IFMS contract, ensuring full alignment with:</p>
<ul>
<li>KBR HSSE management system</li>
<li>Applicable local regulatory requirements</li>
</ul>
<p>The role supports workforce health, wellbeing, and fatigue management while reinforcing IFMS Goal Zero, Life-Saving Rules, and KBR’s Beyond Zero safety culture.</p>
<h4>Key responsibilities</h4>
<p><strong>1. HSSE leadership & compliance</strong></p>
<ul>
<li>Demonstrate visible HSSE leadership in line with KBR Zero Harm</li>
<li>Ensure strict compliance with Life-Saving Rules, MFDS Permit to Work (PTW) and isolation requirements (where applicable), KBR and IFMS HSSE procedures</li>
<li>Develop, implement, and maintain risk assessments (RA), task risk assessments (TRA), and job safety analyses (JSA) for all fitness activities</li>
<li>Ensure emergency preparedness including first aid and AED readiness, clear emergency response procedures within the facility</li>
<li>Report and investigate incidents, near misses, unsafe acts and conditions using KBR approved reporting systems</li>
<li>Support and participate in HSSE audits, site inspections, assurance and compliance reviews</li>
</ul>
<p><strong>2. Facility operations & asset integrity</strong></p>
<ul>
<li>Manage daily operations of the physical training centre, including gymnasium, functional training spaces, games areas (inside and outside), stretching and group exercise areas, swimming and sauna areas</li>
<li>Ensure the facility is clean, hygienic, and orderly; safe, ventilated, and fit for purpose; operated within approved capacity</li>
<li>Conduct and record daily, weekly, and monthly equipment inspections</li>
<li>Coordinate planned preventive maintenance (PPM) and corrective maintenance through maintenance teams</li>
<li>Ensure fitness equipment is certified, serviceable, and used in accordance with manufacturer requirements, including pool maintenance</li>
<li>Control access and prevent misuse of equipment</li>
</ul>
<p><strong>3. Fitness programmes & user safety</strong></p>
<ul>
<li>Deliver or supervise fitness programmes suitable for shift workers, rotational personnel, and physically demanding roles</li>
<li>Conduct mandatory gym inductions for all users</li>
<li>Ensure users are briefed on safe exercise techniques and personal responsibility for fitness activities</li>
<li>Support injury prevention, mobility, and fatigue management initiatives</li>
<li>Coordinate with site ISOS medical team and KBR HSSE team for wellness, rehabilitation, or return-to-work support</li>
</ul>
<p><strong>4. Supervision & IFMS administration</strong></p>
<ul>
<li>Supervise gym attendants, fitness instructors, or subcontracted staff (if applicable)</li>
<li>Enforce discipline, behavioral standards, and professional conduct aligned with KBR Code of Conduct and KBR Values and Ethics</li>
<li>Maintain accurate records for user inductions, attendance, equipment inspections, and HSSE documentation</li>
<li>Provide input to monthly IFMS reports and KPIs including facility utilization, HSSE observations, incidents / near misses, and equipment availability</li>
<li>Deliver toolbox talks and participate in KBR HSSE meetings as required</li>
<li>Prepare fitness programs, welfare event calendars, and manage sports events</li>
</ul>
<p><strong>5. Client & stakeholder interface</strong></p>
<ul>
<li>Act as the primary interface for fitness facility matters between KBR IFMS staff, KBR HSSE and site services providers, and site medical team</li>
<li>Address client observations, workforce feedback, and corrective actions</li>
<li>Support field wellbeing campaigns and continuous improvement initiatives</li>
<li>Represent KBR IFMS in a professional and client-focused manner at all times</li>
</ul>
<h4>Qualifications & certifications</h4>
<p><strong>Essential</strong></p>
<ul>
<li>Formal qualification in physical training, sports science, physical education, or fitness instruction</li>
<li>Certified fitness instructor / personal trainer</li>
<li>Valid first aid, CPR, and AED certification or medical experience</li>
</ul>
<p><strong>Desirable</strong></p>
<ul>
<li>NEBOSH IGC / IOSH Managing Safely or equivalent</li>
<li>Experience working under KBR IFMS contracts</li>
<li>Prior experience on Majnoon or IOC operated sites</li>
<li>Mental health or wellbeing programme awareness</li>
</ul>
<h4>Experience</h4>
<ul>
<li>Minimum 3–5 years’ experience supervising a fitness or training facility</li>
<li>Experience in remote, industrial, or high-risk environments</li>
<li>Oil & gas, EPC, EPCM, or construction camp experience preferred</li>
</ul>
<h4>Competencies & behaviors</h4>
<ul>
<li>Strong HSSE awareness with proactive hazard identification</li>
<li>Demonstrates Shell and KBR safety leadership behaviours</li>
<li>High personal integrity and professionalism</li>
<li>Effective communicator with multicultural teams</li>
<li>Organised, resilient, and capable of working independently</li>
<li>Physically fit and able to safely demonstrate training techniques</li>
</ul>
<h4>Working conditions</h4>
<ul>
<li>Remote onshore oil & gas location</li>
<li>Rotational schedule (e.g. 28/28)</li>
<li>Camp accommodation</li>
<li>Hot and dusty environmental conditions</li>
<li>Flexible hours to support shift patterns</li>
</ul>
<h4>HSSE & performance expectations</h4>
<ul>
<li>Zero harm mindset</li>
<li>Full compliance with KBR HSSE management system and IFMS contract obligations</li>
<li>Immediate intervention for unsafe acts or conditions</li>
<li>Continuous improvement focus</li>
</ul></p><p></p>