Swift Jobs in Iraq

<p>Job Specification • Act as the primary liaison and first point of contact for ATC, RFF, Ground Handling Agents, Airlines, Engineering, and external stakeholders on all airside operational matters during the shift, escalating to the Head of Airside Operations where required. • Ensure strict enforcement of Airside Driving Regulations (ADR), Apron Discipline, and all active Airside Driving Permits (ADP) and Airside Vehicle Permits (AVP) throughout the shift; direct shift inspectors to act on violations and authorize the issuance of Non-Compliance Notices (NCN). • Coordinate and direct Wildlife Hazard Management activities during the shift, ensuring that wildlife observations are reported, logged, and acted upon in accordance with the Wildlife Hazard Management Plan, and that the runway and movement area remain safe for operations. • Oversee apron safety and operational discipline across all apron zones, including monitoring of ground handling activities, FOD prevention, fuel safety compliance, and resolution of apron. • Authorize and oversee emergency and contingency responses for airside-specific incidents during the shift — including runway/taxiway incursions, ground handling accidents, FOD alerts, fuel spills, airside vehicle accidents, and wildlife strikes — in accordance with the Airport Emergency Plan (AEP) and Airside Operations contingency procedures. • Complete, review, and submit comprehensive shift log reports capturing all significant events, incidents, operational decisions taken, and handover notes for each shift, ensuring accurate and auditable records for the Head of Airside Operations. • Conduct or delegate shift airside inspections of the movement area, apron, perimeter roads, and active worksites, ensuring compliance with ICAO Annex 14 standards, aerodrome certification requirements, and airport operational procedures. • Represent Airside Operations in real-time coordination calls, Airside Operations Room meetings, and pre/post-flight briefings during the shift as required. Human and Technical Resources • Direct and coordinate the full complement of Airside Operations shift staff across all sections for the duration of the shift, ensuring appropriate task allocation, coverage of all operational zones, and staff welfare. • Utilize the available management systems, stand planning tools, NOTAM databases, radio communication systems, and CCTV/surveillance platforms to maintain real-time situational awareness and operational control throughout the shift. • Ensure all shift operational vehicles and equipment are serviceable and deployed effectively; report unserviceable assets to the Head of Airside Operations and Engineering for immediate action. Planning and Programme • Review and brief all shift staff on the daily flight programme, scheduled airside works, active NOTAMs, planned closures, and any regulatory or safety advisories at shift commencement. • Contribute shift-level observations and operational data to the continuous improvement of Airside Operations procedures, SOPs, and contingency plans by providing structured feedback to the Head of Airside Operations. Core Operational Activities • Execute structured shift start and shift end handovers, ensuring all active permits, incidents, NOTAMs, ongoing works, and outstanding actions are clearly communicated and transferred to the incoming duty manager. • Authorize real-time operational decisions including temporary runway/taxiway restrictions, emergency equipment pre-positioning, and suspension of airside work activities when safety is at risk. • Coordinate the activation and stand-down of airside emergency responses for airside-specific incidents, ensuring all relevant parties (ATC, RFF, Ground Handlers, Engineering, airside operations team) are notified and deployed in accordance with the AEP. • Monitor and enforce FOD (Foreign Object Debris/Damage) prevention programmes across all apron and movement area zones, directing FOD inspections and ensuring immediate clearance of any identified debris. Human Resources Management • Provide direct line management, mentoring, and performance evaluation for all operational shift subordinates in alignment with the airport HR and competency framework. • Manage leave planning, duty rosters, and workforce scheduling to ensure continuous, uninterrupted operational coverage of all shift functions. • Identify training and career development opportunities for Operations Section staff and foster a safety-first, accountability-driven team culture.</p><p>Education • Bachelor's Degree, (Preferably in Aviation Management, Airport Operations, Aeronautical Science) Engineering, or a related discipline from a recognized institution. • A post-graduate qualification or diploma in Aviation/Airport Management is an added advantage) Experience • Minimum 6 years of progressive experience in airport airside operations, of which at least 2 years must be in a supervisory or senior Operational role with demonstrated shift management responsibility. • Proven experience in apron management, movement area operations, airside safety enforcement, and emergency/contingency coordination. • Experience across multiple Airside Operational functions is highly desirable. Computer Skills • Professional knowledge of Microsoft Suite (especially Word, PowerPoint and Excel) (Essential) • Demonstrated competency with various Airport Operations Management Systems (AODB, FIDS, stand planning tools), NOTAM databases, radio communication systems, and airside surveillance/CCTV platforms. Language Skills • English: solid written and spoken proficiency (Essential). English Language Proficiency - Minimum ICAO Level 4 or equivalent • Arabic: working proficiency (Desirable). Training Requirements • ICAO Annex 14 – Aerodromes (Essential). • ICAO Safety Management System (SMS) – ICAO-recognized institute (Essential). • Coordination of Emergency Response (Aerodrome Emergency Planning) (Essential). • Airside Driving Permit / Airside Driving Assessor certification (Highly Desirable). • Aerodrome Wildlife Hazard Management (Highly Desirable). • FOD Prevention Programme certification (Highly Desirable). • First Aid / Basic Life Support (Desirable).</p>

<p>Job Specification • Act as the primary liaison and first point of contact for ATC, RFF, Ground Handling Agents, Airlines, Engineering, and external stakeholders on all airside operational matters during the shift, escalating to the Head of Airside Operations where required. • Ensure strict enforcement of Airside Driving Regulations (ADR), Apron Discipline, and all active Airside Driving Permits (ADP) and Airside Vehicle Permits (AVP) throughout the shift; direct shift inspectors to act on violations and authorize the issuance of Non-Compliance Notices (NCN). • Coordinate and direct Wildlife Hazard Management activities during the shift, ensuring that wildlife observations are reported, logged, and acted upon in accordance with the Wildlife Hazard Management Plan, and that the runway and movement area remain safe for operations. • Oversee apron safety and operational discipline across all apron zones, including monitoring of ground handling activities, FOD prevention, fuel safety compliance, and resolution of apron. • Authorize and oversee emergency and contingency responses for airside-specific incidents during the shift — including runway/taxiway incursions, ground handling accidents, FOD alerts, fuel spills, airside vehicle accidents, and wildlife strikes — in accordance with the Airport Emergency Plan (AEP) and Airside Operations contingency procedures. • Complete, review, and submit comprehensive shift log reports capturing all significant events, incidents, operational decisions taken, and handover notes for each shift, ensuring accurate and auditable records for the Head of Airside Operations. • Conduct or delegate shift airside inspections of the movement area, apron, perimeter roads, and active worksites, ensuring compliance with ICAO Annex 14 standards, aerodrome certification requirements, and airport operational procedures. • Represent Airside Operations in real-time coordination calls, Airside Operations Room meetings, and pre/post-flight briefings during the shift as required. Human and Technical Resources • Direct and coordinate the full complement of Airside Operations shift staff across all sections for the duration of the shift, ensuring appropriate task allocation, coverage of all operational zones, and staff welfare. • Utilize the available management systems, stand planning tools, NOTAM databases, radio communication systems, and CCTV/surveillance platforms to maintain real-time situational awareness and operational control throughout the shift. • Ensure all shift operational vehicles and equipment are serviceable and deployed effectively; report unserviceable assets to the Head of Airside Operations and Engineering for immediate action. Planning and Programme • Review and brief all shift staff on the daily flight programme, scheduled airside works, active NOTAMs, planned closures, and any regulatory or safety advisories at shift commencement. • Contribute shift-level observations and operational data to the continuous improvement of Airside Operations procedures, SOPs, and contingency plans by providing structured feedback to the Head of Airside Operations. Core Operational Activities • Execute structured shift start and shift end handovers, ensuring all active permits, incidents, NOTAMs, ongoing works, and outstanding actions are clearly communicated and transferred to the incoming duty manager. • Authorize real-time operational decisions including temporary runway/taxiway restrictions, emergency equipment pre-positioning, and suspension of airside work activities when safety is at risk. • Coordinate the activation and stand-down of airside emergency responses for airside-specific incidents, ensuring all relevant parties (ATC, RFF, Ground Handlers, Engineering, airside operations team) are notified and deployed in accordance with the AEP. • Monitor and enforce FOD (Foreign Object Debris/Damage) prevention programmes across all apron and movement area zones, directing FOD inspections and ensuring immediate clearance of any identified debris. Human Resources Management • Provide direct line management, mentoring, and performance evaluation for all operational shift subordinates in alignment with the airport HR and competency framework. • Manage leave planning, duty rosters, and workforce scheduling to ensure continuous, uninterrupted operational coverage of all shift functions. • Identify training and career development opportunities for Operations Section staff and foster a safety-first, accountability-driven team culture.</p><p>Education • Bachelor's Degree, (Preferably in Aviation Management, Airport Operations, Aeronautical Science) Engineering, or a related discipline from a recognized institution. • A post-graduate qualification or diploma in Aviation/Airport Management is an added advantage) Experience • Minimum 6 years of progressive experience in airport airside operations, of which at least 2 years must be in a supervisory or senior Operational role with demonstrated shift management responsibility. • Proven experience in apron management, movement area operations, airside safety enforcement, and emergency/contingency coordination. • Experience across multiple Airside Operational functions is highly desirable. Computer Skills • Professional knowledge of Microsoft Suite (especially Word, PowerPoint and Excel) (Essential) • Demonstrated competency with various Airport Operations Management Systems (AODB, FIDS, stand planning tools), NOTAM databases, radio communication systems, and airside surveillance/CCTV platforms. Language Skills • English: solid written and spoken proficiency (Essential). English Language Proficiency - Minimum ICAO Level 4 or equivalent • Arabic: working proficiency (Desirable). Training Requirements • ICAO Annex 14 – Aerodromes (Essential). • ICAO Safety Management System (SMS) – ICAO-recognized institute (Essential). • Coordination of Emergency Response (Aerodrome Emergency Planning) (Essential). • Airside Driving Permit / Airside Driving Assessor certification (Highly Desirable). • Aerodrome Wildlife Hazard Management (Highly Desirable). • FOD Prevention Programme certification (Highly Desirable). • First Aid / Basic Life Support (Desirable).</p>

<p>The Control room operator shall be fully responsible for safe and efficient operation of plant in all operating conditions within the technical limits as outlined in PPA, GSA and in operating procedures following the best practices of the power industry. Strictly adheres to all safety rules; lockout/tag out, work permit guidelines, confined space entry and similar policies put in place to protect the employee s health and safety. Monitors device operation and power production at the control console/station. Records operating data in logs, maintains records. Starts stops and operates device in accordance with site Operating Procedures and as per the direction of Shift supervisor</p><p>Essential Duties &amp; Responsibilities:</p><ul><li>Understand and respond accordingly various alarm and process conditions.</li><li>Diagnose malfunctions in machinery and device and effectively communicate with the Shift Supervisor.</li><li>Raise work order &amp; communicate with maintenance department as per the advice of shift supervisor about malfunctions in machines and device.</li><li>Maintain a log of all shift activities carried out during his shift.</li><li>Assist shift supervisor in compiling the operation reports such as daily shift report, event summaries and trip reports.</li><li>Read meters and gauges or automatic recording devices at specified intervals to verify operating conditions.</li><li>Record data such as temperature of device, hours of operation, temperature or pressure, and fluid levels at specified intervals.</li><li>Meet operational schedules by distributing power demands among the generators and starting or stopping generating units and connecting or disconnecting them from circuits, units, boilers and open or close valves etc.</li><li>Coordinate and issue instructions to plant operators during normal and emergency condition.</li><li>Recommend and implement measures to improve production methods, device performance and quality of product.</li><li>Read, understand and maintain compliance with the following technical manuals system piping and instrumentation diagrams plant safety and regulatory procedures</li><li>Perform the duties of shift supervisor under specific instructions of the plant management.</li><li>Understand OH&amp;S risks / hazards and environmental / legislative aspect / impacts related to work activities.</li><li>Ensure the proper housekeeping of his designated plant area</li><li>Travel extensively (internationally and domestically)</li><li>Ability and willingness to work holidays, weekends and overtime as required by field assignments</li><li>You may be assigned other duties to help proactively drive our FieldCore vision and align with our organization s core values.</li></ul><p><strong>Desired Candidate Profile</strong></p><h2>Required Qualifications &amp; Experience :</h2><p>Associate Degree in Engineering with 5-7 years related work experience in similar position in Combined Cycle Power Plant preferably having GE F Class Technology</p><p>English proficiency required</p><h2>Desired Characteristics:</h2><ul><li>Ability to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals.</li><li>Ability to write routine reports and correspondence.</li></ul>

<p>Job Specification • Supervise ARFF shift activities and maintain continuous readiness of personnel, vehicles, rescue equipment, communication systems, and firefighting resources. • Ensure the declared aerodrome category protection level is continuously maintained. • Deployment of personnel and resources during aircraft emergencies, structural fires, fuel incidents, medical emergencies, hazardous material incidents, and standby operations. • Function as the initial incident commander during emergencies until the arrival of designated incident commander as per AEP. • Maintain operational discipline, shift supervision, personnel accountability, and compliance with approved operational procedures and safety requirements. • Conduct operational inspections of firefighting vehicles, rescue tools, communication systems, extinguishing agents, PPE, and associated operational equipment. • Oversee implementation of operational drills, practical exercises, shift training activities, and familiarization programmes during assigned duty periods and submit relevant reports to Training Officer. • Ensure operational records, occurrence reports, inspection logs, vehicle checklists, and shift documentation are properly maintained and updated. • Coordinate with ATC, medical services, security agencies, airlines, maintenance departments, and external emergency services during operational activities and emergencies. • Ensure implementation of departmental SOPs, Airport Emergency Plan procedures, operational directives, and regulatory requirements. Human and Technical Resources • Supervise shift personnel deployment and ensure adequate manpower availability for operational response, standby coverage, drills, and routine duties. • Verify competency, operational preparedness, PPE compliance, and duty readiness of personnel assigned to the operational shift. • Ensure that all personnel deployed under are completed mandatory training requirements as per the prescribed schedule and submit the reports to Training officer. • Monitor serviceability and operational condition of ARFF vehicles, firefighting equipment, rescue tools, communication systems, and station facilities. • Reporting and follow-up of equipment defects, maintenance requirements, and operational deficiencies affecting emergency response capability. • Competency development and operational mentoring of Crew Commanders, Senior Firefighters, Firefighters, and Drivers/Operators. Planning and Programmes • Plan and supervise shift-level operational drills, practical training sessions, equipment familiarization activities, and emergency response exercises. • Implement departmental operational plans, training schedules, inspection programmes, and emergency preparedness activities. • Manage operational activities during shift duty to ensure efficient time management without affecting emergency response readiness. • Participate in operational debriefings, performance reviews, and improvement initiatives arising from incidents, drills, and exercises. • Assist in the implementation of fire prevention activities, operational inspections, and emergency preparedness programmes where assigned. • Ensure completion of all competency development activities as per stipulated timeframe. Core Operational Activities • Respond to all airport emergency calls and conduct tactical deployment of ARFF resources during emergency operations. • Coordinate and direct firefighting, rescue, casualty handling, hazard control, evacuation, and operational containment activities during emergencies. • Maintain effective communication and operational coordination with responding agencies and airport operational departments. • Monitor compliance with operational response procedures, safety precautions, PPE usage, and emergency communication protocols during incidents. • Supervise operational activities within fire stations, including inspections, readiness checks, reporting activities, and operational administration. • Participate in post-incident reviews, operational debriefings, and implementation of corrective actions arising from emergency operations. • Function as initial on scene commander until the arrival of designated OSC. Human Resources Management • Supervise operational personnel during assigned shifts and allocate duties in accordance with operational and training requirements. • Maintain discipline, professional conduct, teamwork, and operational accountability among shift personnel. • Monitor operational performance and competency of personnel and provide guidance, coaching, and mentoring where required. • Conduct training and familiarization activities aimed at improving operational competency and emergency response capability. • Ensure compliance with occupational health and safety requirements and encourage reporting of hazards, unsafe conditions, and operational concerns. Budget and Activity Planning • Propose ARFF CAPEX/OPEX need for next FY to Fire Chief for effective budgetary planning. • Ensures efficient utilization of operational resources, firefighting media, vehicles, equipment, and station facilities. • Monitor operational consumption of firefighting agents, PPE, fuel, and station resources and report replenishment or replacement requirements. • Oversee inventory monitoring and operational stock control activities associated with firefighting and rescue operations. • Supervise shift activities efficiently to maintain operational effectiveness and continuous emergency readiness. Quality and Environmental Management (QMS / EMS) • Ensure operational activities, inspections, and station records are maintained in accordance with approved quality procedures and departmental operational standards. • Participate in audits, operational inspections, and continual improvement activities associated with ARFF operational readiness. • Promote environmentally responsible operational practices during firefighting activities, foam handling, fuel spill response, and hazardous material incidents. Safety Management System (SMS) • Implement Safety Management System (SMS) requirements during operational activities and emergency response operations. • Conduct hazard identification and operational risk assessment during routine activities and emergency incidents. • Ensure operational occurrences, hazards, equipment failures, and safety concerns are reported through approved reporting systems. • Participate in operational investigations, safety reviews, and corrective action implementation associated with incidents and operational occurrences. • Promote safety awareness, operational discipline, and safe working practices among shift personnel.</p><p>Education Bachelor’s degree or equivalent qualification (Essential) Experience • Minimum 12 years of progressive experience in Aircraft Rescue and Firefighting operations. • Experience in Aerodrome Category 8 or above airport operations preferred. • Previous supervisory experience in ARFF operational activities and emergency response coordination is essential. • Additional consideration may be given to candidates possessing operational experience on NAFFCO CFTs. Computer Skills Working knowledge of MS Office Language Skills English: Proficient written and spoken communication skills (Essential). Arabic: Desirable Training Requirements • Fire Officer / Watch Commander / Airport Fire Officer course from a recognised training institution • Heavy vehicle driving license and driving & operation of crash fire tenders</p>

<p>The Operator monitors device operation and power production locally. Makes rounds, checking the condition of all operating machinery. Records operating data in logs, maintains records. Starts stops and operates device in accordance with site Operating Procedures and per the direction of the control room operator and Shift Supervisor. Helps maintaining power output to meet system demand without exceeding machinery s design capacity. Helping out shift supervisor in carrying out Isolations/de-isolation as and when required. Escorts, observes and supervises performance of contractors to ensure compliance with Site Safety Procedures. Keeps site clear of all fire or other safety hazards.</p><p><strong>Essential Duties &amp; Responsibilities:</strong></p><ul><li>Maintain a log of all the field activities carried out during his shift</li><li>Coordinate with control room operator in safe isolation of device for preventive and corrective maintenance.</li><li>Reads and record meters and gauges or automatic recording devices at specified intervals to verify operating conditions.</li><li>Record data such as temperature of device, hours of operation, temperature or pressure, and fluid levels.</li><li>Open and close valves as required for proper system operation and mechanical isolation.</li><li>Open and close circuit breakers for proper system operation and electrical isolation.</li><li>Coordinate with control room operator to diagnose malfunctions in machinery and device and effectively communicate with the control room operator &amp; Shift Supervisor during plant normal and emergency situation</li><li>Discuss with control room operator and shift supervisor, measures to improve production methods, device performance and quality of product.</li><li>Analyze and resolve work problems or assist workers in solving work problems.</li><li>Raise work orders for required operational preventative and corrective maintenance.</li><li>Read and understand technical manuals and system piping and instrumentation diagrams.</li><li>Read, understand, and ensure compliance with all plant safety and regulatory procedures.</li><li>Perform the duties of control room operator under specific instructions of the plant management.</li><li>Keep clean, repair and maintain power plant device.</li><li>Understand OH&amp;S risks / hazards and environmental / legislative aspect / impacts related to work activities.</li><li>Be responsible for housekeeping of his assigned plant area.</li><li>Travel extensively (internationally and domestically)</li><li>Ability and willingness to work holidays, weekends and overtime as required by field assignments</li><li>You may be assigned other duties to help proactively drive our FieldCore vision and align with our organization s core values.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>High School Diploma or equivalent</li><li>1-3 years related work experience at combined cycle power plant preferably having GE F Class Technology</li><li>English proficiency required</li></ul><p><strong>Desired Characteristics:</strong></p><ul><li>Ability to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals.</li><li>Ability to write routine reports and correspondence.</li><li>Ability to speak effectively to employees of the organization</li></ul>

<p><h4>Essential responsibilities:</h4> <p>Aerostat operators/user-level maintainers will participate in the overall, hands-on operation of the aerostat system including launch, in-flight, recovery, and moored activities.</p> <p>Candidates will perform all functions to operate the Persistent Ground Surveillance System (PGSS) and Persistent Threat Detection System (PTDS), an aerostat mounted Intelligence, Surveillance, and Reconnaissance (ISR) platform, its Mobile Mooring Platform (MMP), sensor payloads, communications and navigation systems, as well as associated support equipment including boom lift, forklift, all-terrain vehicles (ATVs), and electrical power generators.</p> <p>Additional responsibilities include performing analyses of system operations. Candidates must have:</p> <ul> <li>Knowledge of and experience in the operations of hardware systems and components.</li> <li>Experience in fault detection, isolation, and correction of hardware systems and individual components.</li> <li>Ability to perform routine system maintenance and analysis functions including hardware configurations; adding, removing, and replacing hardware components; use of hardware and software diagnostic testing tools; reading of electronic circuit schematics; and repairing printed circuit boards.</li> </ul> <p>Candidates will perform user-level maintenance functions including performing hands-on Preventative Maintenance Checks and Services (PMCS), troubleshooting, removing and replacing Line Replaceable Units (LRUs), and removing and replacing payloads.</p> <p>Candidates must possess a diverse range of skills with the ability to quickly adapt to new situations. Tasks will be performed under the direction of higher classified technicians and/or site personnel.</p> <h4>Minimum requirements:</h4> <ul> <li>High school diploma or equivalent is required.</li> <li>Two-year associate’s degree in a technical field from an accredited college can substitute for work experience.</li> <li>Must have an active Secret US Government clearance. US citizenship is required to obtain a Secret clearance.</li> <li>At least one year previous aerostat experience.</li> <li>Certified and school trained on 34M and 74K.</li> <li>Must have a valid U.S. passport with a minimum of one year remaining.</li> <li>Must have a valid US driver’s license.</li> <li>Knowledge of and experience in the operations of hardware systems and components.</li> <li>Experience in fault detection, isolation, and correction of hardware systems and individual components.</li> <li>Ability to perform routine system maintenance and analysis functions including hardware configurations; adding, removing, and replacing hardware components; use of hardware and software diagnostic testing tools; reading of electronic circuit schematics; and repairing printed circuit boards.</li> </ul> <h4>Physical requirements:</h4> <ul> <li>Requires the ability to regularly lift up to 50 lbs.</li> <li>Requires the ability to regularly climb extension ladders, roof ladders, stepladders, and stairs at least 10 times during shift.</li> <li>Requires the flexibility to bend/stoop and squat repetitively during shift.</li> <li>Requires the ability to regularly kneel repetitively during shift.</li> <li>Requires the ability to move in a 90-degree fashion on a repetitive basis during shift.</li> <li>Requires the ability to stretch/reach on a repetitive basis during shift.</li> <li>Requires the ability to walk extensively throughout the plant during shift.</li> <li>Requires the ability to interact with all clients in a professional and friendly manner despite periods of stress.</li> </ul> <h4>Medical requirements:</h4> <ul> <li>Successfully complete and pass the medical and dental examinations as required for deployment to Iraq.</li> <li>Must maintain physical and dental requirements for the duration of the deployment.</li> </ul> <h4>Working and living conditions:</h4> <p>This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to an extreme and austere desert-like environment. Temperatures can reach 120-130 degrees Fahrenheit (50-55 degrees Celsius) during the summer months.</p> <p>Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to CENTCOM, EUCOM, and AFRICOM for extended periods.</p> <p>Work schedules are a minimum of six days per week and ten hours per day, while some jobs have higher daily and weekly minimums.</p></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>CoW Advisor<br><br><p>Planning and Risk Assessment: Conduct a detailed discussion with the Performing Authority (PA) during the work planning stage to ensure all hazards are identified. Verify that an appropriately detailed Risk Assessment is completed to reduce risks to an acceptable level (ALARP). Ensure the quality of the CoW documentation by checking that the content is accurate and supplementary certificates are approved and attached. Worksite Visits and Monitoring: Visit the worksite with the PA to prepare the Hazard Identification and Risk Assessment (HITRA), ensuring the PA understands the location, equipment, activities, hazards, and related controls. Attend the worksite on the initial issue of the permit, participate in toolbox talks, and authorize the work to start. Perform regular monitoring checks during each shift, particularly within the first hour of the permit's issuance. Energy Isolation and Safety Controls: Approve the design of energy isolation and oversee the implementation of energy isolation measures prior to the issuance of work permits. Confirm that energy isolation is in place before task initiation and demonstrate the isolation to the PA. Confirm positive isolation for Hot Work,, and Confined Space Entry tasks. Liaise with the station SAEP to ensure that all work with electrical content is reviewed, and all associated electrical certificates and risk assessments are in place. Authorises sanction to test on agreed isolations and points Maintains station isolation register, monitoring work scopes and removing isolation when required or transferring to LTI. Permit Closure and Worksite Safety: Close permits by signing to confirm that work is completed, ensuring that the worksite is left safe, clean, and tidy. Ensure that energy isolation is removed after work completion and the cancellation of the permit. Shift Handover: Conduct a thorough handover regarding ongoing tasks during shift changes with the oncoming AA, ensuring continuity and safety. SIMOPS Coordination: Ensure that work can proceed safely with no significant impact from or to SIMOPS. Daily Meetings and Continuous Improvement: Attend daily permit/SIMOPS meetings to provide detailed work scopes to support the Site Manager (SM). Capture any lessons learned from the CoW process within WorkSafe and conduct self-verification audits.</p><br><br><br><br><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Aerostat Operators provide Operations and Sustainment (O&amp;S) support for the Persistent Surveillance Systems Tethered (PSS-T) program in OCONUS site locations. PSS-T is comprised of former Persistent Ground Surveillance System (PGSS) and Persistent Threat Detection System (PTDS) programs. Essential Responsibilities: Aerostat Operators/User-level maintainers will participate in the overall, hands-on operation of the aerostat system including launch, in-flight, recovery, and moored activities. Candidates will perform all functions to operate the PGSS/PTDS, an aerostat mounted Intelligence, Surveillance, And Reconnaissance (ISR) platform, its Mobile Mooring Platform (MMP), Sensor Payload(s), communications and navigation systems as well as associated support equipment (Boom Lift, Forklift, All Terrain Vehicles (ATV's), and Electrical Power Generators). Additional responsibilities include performing analyses of system operations and candidates must have:</p><p>Knowledge of and experience in the operations of hardware systems and components. Experience in fault detection, isolation, and correction of hardware systems and individual components. Ability to perform routine system maintenance and analysis functions including: hardware configurations; adding, removing and replacing hardware components; use of hardware and software diagnostic testing tools; reading of electronic circuit schematics; and repairing printed circuit boards. Candidate will perform User-level maintenance functions include performing hands-on Preventative Maintenance Checks and Services (PMCS), troubleshooting, removing and replacing Line Replaceable Units (LRUs), and removing and replacing payloads. Candidate must possess a diverse range of skills with the ability to quickly adapt to new situations. Tasks will be performed under direction of higher classified technicians and/or site personnel.</p><p>Physical Requirements: Requires the ability to regularly lift up to 50 lbs. Requires the ability to regularly climb extension ladders, roof ladder, stepladders, and stairs at least 10 times during shift. Requires the flexibility to bend/stoop, squat repetitive during shift. Requires the ability to regularly kneel repetitive for shift. Requires the ability to move in a 90-degree fashion on a repetitive basis for shift. Requires the ability to stretch/reach on a repetitive basis for shift. Requires the ability to walk extensively throughout the plant during shift. Requires the ability to interact with all clients in a professional and friendly manner despite periods of stress.</p><p>Medical Requirements Successfully complete and pass the medical and dental examinations as required by Amentum and our customer for deployment to Iraq. Must maintain physical and dental requirements for the duration of the deployment.</p><p>Working and Living Conditions: This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environment. Temperatures can reach PHONE_NUMBER degrees Fahrenheit/50-55 degrees Celsius during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to CENTCOM, EUCOM, and AFRICOM for extended periods. Work schedules are a minimum of 6 days per week and 10 hours per day, while some jobs have higher daily and weekly minimums. #TAMOD</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>High school diploma or equivalent is required.</li><li>Two-year Associate s degree in a technical field from an accredited college can substitute for work experience.</li><li>Must have an active Secret US Government Clearance.</li><li>Note: US Citizenship is required to obtain a Secret Clearance.</li><li>At least ONE (1) year previous Aerostat experience.</li><li>Certified and school trained on 34M and 74K.</li><li>Must have a valid U.S. passport with a minimum of one year remaining.</li><li>Must have valid US Driver's license.</li><li>Knowledge of and experience in the operations of hardware systems and components.</li><li>Experience in fault detection, isolation, and correction of hardware systems and individual components.</li><li>Ability to perform routine system maintenance and analysis functions including: hardware configurations; adding, removing and replacing hardware components; use of hardware and software diagnostic testing tools; reading of electronic circuit schematics; and repairing printed circuit boards.</li><li>Candidate must possess a diverse range of skills with the ability to quickly adapt to new situations.</li></ul><p></p></section>

<p><h4>Planning and risk assessment</h4> <p>Conduct a detailed discussion with the performing authority (PA) during the work planning stage to ensure all hazards are identified. Verify that an appropriately detailed risk assessment is completed to reduce risks to an acceptable level (ALARP). Ensure the quality of the CoW documentation by checking that the content is accurate and supplementary certificates are approved and attached.</p> <h4>Worksite visits and monitoring</h4> <p>Visit the worksite with the PA to prepare the hazard identification and risk assessment (HITRA), ensuring the PA understands the location, equipment, activities, hazards, and related controls. Attend the worksite on the initial issue of the permit, participate in toolbox talks, and authorize the work to start. Perform regular monitoring checks during each shift, particularly within the first hour of the permit's issuance.</p> <h4>Energy isolation and safety controls</h4> <p>Approve the design of energy isolation and oversee the implementation of energy isolation measures prior to the issuance of work permits. Confirm that energy isolation is in place before task initiation and demonstrate the isolation to the PA. Confirm positive isolation for hot work and confined space entry tasks. Liaise with the station SAEP to ensure that all work with electrical content is reviewed, and all associated electrical certificates and risk assessments are in place. Authorise sanction to test on agreed isolations and points. Maintain the station isolation register, monitoring work scopes and removing isolation when required or transferring to LTI.</p> <h4>Permit closure and worksite safety</h4> <p>Close permits by signing to confirm that work is completed, ensuring that the worksite is left safe, clean, and tidy. Ensure that energy isolation is removed after work completion and the cancellation of the permit.</p> <h4>Shift handover</h4> <p>Conduct a thorough handover regarding ongoing tasks during shift changes with the oncoming AA, ensuring continuity and safety.</p> <h4>SIMOPS coordination</h4> <p>Ensure that work can proceed safely with no significant impact from or to SIMOPS.</p> <h4>Daily meetings and continuous improvement</h4> <p>Attend daily permit/SIMOPS meetings to provide detailed work scopes to support the site manager (SM). Capture any lessons learned from the CoW process within WorkSafe and conduct self-verification audits.</p></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Area Authority (AAD)<br><br><p><b>Planning and Risk Assessment</b>:</p><br><br><p>Conduct a detailed discussion with the Performing Authority (PA) during the work planning stage to ensure all hazards are identified. Verify that an appropriately detailed Risk Assessment is completed to reduce risks to an acceptable level (ALARP). Ensure the quality of the CoW documentation by checking that the content is accurate and supplementary certificates are approved and attached.</p><br><br><br><p><b>Worksite Visits and Monitoring</b>:</p><br><br><p>Visit the worksite with the PA to prepare the Hazard Identification and Risk Assessment (HITRA), ensuring the PA understands the location, equipment, activities, hazards, and related controls. Attend the worksite on the initial issue of the permit, participate in toolbox talks, and authorize the work to start. Perform regular monitoring checks during each shift, particularly within the first hour of the permit's issuance.</p><br><br><br><p><b>Energy Isolation and Safety Controls:</b></p><br><br><p>Approve the design of energy isolation and oversee the implementation of energy isolation measures prior to the issuance of work permits. Confirm that energy isolation is in place before task initiation and demonstrate the isolation to the PA. Confirm positive isolation for Hot Work,, and Confined Space Entry tasks. Liaise with the station SAEP to ensure that all work with electrical content is reviewed, and all associated electrical certificates and risk assessments are in place. Authorises sanction to test on agreed isolations and points Maintains station isolation register, monitoring work scopes and removing isolation when required or transferring to LTI.</p><br><br><br><p><b>Permit Closure and Worksite Safety:</b></p><br><br><p>Close permits by signing to confirm that work is completed, ensuring that the worksite is left safe, clean, and tidy. Ensure that energy isolation is removed after work completion and the cancellation of the permit.</p><br><br><br><p><b>Shift Handover: </b></p><br><br><p>Conduct a thorough handover regarding ongoing tasks during shift changes with the oncoming AA, ensuring continuity and safety.</p><br><br><br><p><b>SIMOPS Coordination:</b></p><br><br><p>Ensure that work can proceed safely with no significant impact from or to SIMOPS.</p><br><br><br><p><b>Daily Meetings and Continuous Improvement:</b></p><br><br><p>Attend daily permit/SIMOPS meetings to provide detailed work scopes to support the Site Manager (SM). Capture any lessons learned from the CoW process within WorkSafe and conduct self-verification audits.</p><br><br><br><br><br> </div>

<p><h4>Planning and risk assessment</h4> <p>Conduct a detailed discussion with the Performing Authority (PA) during the work planning stage to ensure all hazards are identified. Verify that an appropriately detailed risk assessment is completed to reduce risks to an acceptable level (ALARP). Ensure the quality of the CoW documentation by checking that the content is accurate and supplementary certificates are approved and attached.</p> <h4>Worksite visits and monitoring</h4> <p>Visit the worksite with the PA to prepare the Hazard Identification and Risk Assessment (HITRA), ensuring the PA understands the location, equipment, activities, hazards, and related controls. Attend the worksite on the initial issue of the permit, participate in toolbox talks, and authorize the work to start. Perform regular monitoring checks during each shift, particularly within the first hour of the permit's issuance.</p> <h4>Energy isolation and safety controls</h4> <p>Approve the design of energy isolation and oversee the implementation of energy isolation measures prior to the issuance of work permits. Confirm that energy isolation is in place before task initiation and demonstrate the isolation to the PA. Confirm positive isolation for Hot Work and Confined Space Entry tasks. Liaise with the station SAEP to ensure that all work with electrical content is reviewed, and all associated electrical certificates and risk assessments are in place. Authorises sanction to test on agreed isolations and points. Maintains station isolation register, monitoring work scopes and removing isolation when required or transferring to LTI.</p> <h4>Permit closure and worksite safety</h4> <p>Close permits by signing to confirm that work is completed, ensuring that the worksite is left safe, clean, and tidy. Ensure that energy isolation is removed after work completion and the cancellation of the permit.</p> <h4>Shift handover</h4> <p>Conduct a thorough handover regarding ongoing tasks during shift changes with the oncoming AA, ensuring continuity and safety.</p> <h4>SIMOPS coordination</h4> <p>Ensure that work can proceed safely with no significant impact from or to SIMOPS.</p> <h4>Daily meetings and continuous improvement</h4> <p>Attend daily permit/SIMOPS meetings to provide detailed work scopes to support the Site Manager (SM). Capture any lessons learned from the CoW process within WorkSafe and conduct self-verification audits.</p></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Provide transportation (Cars) per request, send and receive mail among all Iraqi districts, organize shift schedule for drivers (local and company cars). Organize shift drivers (local and company car. Provide transportation for all department per request. Provide transportation for national and international staff from airport to office and opposite. Send and receive all mail and goods among Iraq. On call day and night.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Minimum: High School, or Diploma or equivalent.</li><li>Preferred: Bachelor's degree in Logistics, Supply Chain, Business Administration.</li><li>2-3 years in freight forwarding, transport operations, or logistics .</li><li>Computer Skills (Excel, Word and GPS/Transportation fleet Software or SP system).</li><li>Knowledge of transport documentation, route optimization, and maintenance schedules.</li><li>Language Skill (Arabic, Kurdish English is preferred).</li><li>Ability to work under pressure, negotiate rates, and manage customer service.</li></ul><p>Behavioral Competencies: Delivering Results &amp; Fostering Ownership Building Customer Value Technical Competencies: Transportation &amp; Fleet Management Route Planning &amp; Traffic Regulations Technical Writing and Reporting Documents &amp; Records Management Safety Management Problem Solving</p><p></p></section>

<p>Job Specification • Supervise assigned crew during duties, emergency response activities, drills, and standby operations. • Operate and supervise the operation of ARFF vehicles, firefighting systems, rescue equipment, communication systems, and associated operational resources. • Respond to aircraft emergencies, structural fires, fuel incidents, medical emergencies, hazardous material incidents, and other airport emergencies as directed. • Participate and supervise tactical firefighting, rescue, casualty handling, evacuation, and hazard control activities during emergency operations. • Conduct routine inspections of firefighting vehicles, rescue tools, communication systems, PPE, extinguishing agents, and station equipment to maintain operational readiness. • Assist in the implementation of station drills, practical exercises, operational familiarization activities, and recurrent training programmes. • Maintain operational records, inspection checklists, equipment logs, occurrence reports, and assigned documentation related to shift activities. • Monitor operational safety practices, PPE compliance, housekeeping standards, and readiness conditions within assigned operational areas. • Ensure implementation of departmental SOPs, Airport Emergency Plan procedures, and operational instructions during routine and emergency activities. • Direct the assigned crew activities and maintain effective communication with supervisors and operational personnel during emergency response operations. Human and Technical Resources • Supervise operational activities of assigned firefighters and drivers/operators during routine duties and emergency operations. • Verify operational readiness and serviceability of assigned vehicles, firefighting equipment, rescue tools, PPE, and communication systems. • Report equipment defects, operational deficiencies, and maintenance requirements affecting emergency response capability. • Assist in practical familiarization and on-the-job guidance of personnel deployed under. • Ensure operational resources assigned to the crew are maintained in a clean, serviceable, and operationally ready condition. Planning and Programmes • Conduct shift level drills, operational exercises, practical training sessions, and familiarization programmes. • Participate in operational preparedness activities, inspection schedules, and emergency readiness programmes. • Assist in organizing crew activities during shifts to maintain continuous operational response capability. • Participate in post-drill debriefings, operational reviews, and continuous improvement activities. • Ensure completion of all competency development activities as per stipulated timeframe. Core Operational Activities • Respond promptly to all emergency calls and participate in the deployment of ARFF resources during emergency operations. • Operate and supervise the operation of crash fire tenders, firefighting appliances, rescue tools, and associated emergency equipment in accordance with approved procedures. • Participate in firefighting, rescue, casualty management, hazard control, and evacuation operations during emergency incidents. • Maintain communication discipline and comply with approved RT communication procedures and phraseology during operational activities. • Conduct operational inspections, equipment checks, foam level checks, and routine readiness inspections during assigned duties. • Assist in maintaining station discipline, operational housekeeping, and readiness standards throughout the operational shift. Human Resources Management • Effective supervision of assigned crew personnel during operational and training activities. • Promote teamwork, discipline, safe working practices, and professional conduct among operational personnel. • Assist in training, mentoring, and practical familiarization of firefighters and newly assigned personnel. • Encourage reporting of hazards, unsafe conditions, equipment defects, and operational concerns. • Maintain effective coordination and communication with supervisory personnel during operational activities. Budget and Activity Planning • Supports efficient utilization and care of operational vehicles, firefighting media, PPE, rescue tools, and station resources. • Monitor operational usage of firefighting agents, consumables, and equipment and report deficiencies or replenishment requirements. • Ensure inventory accountability and operational care of equipment assigned to the crew. • Carry out assigned activities efficiently while maintaining operational readiness standards. Quality and Environmental Management (QMS / EMS) • Follow approved operational procedures, inspection standards, and departmental requirements during firefighting, rescue, and routine operational activities. • Participate in operational inspections, equipment checks, and readiness verification activities assigned during shift duties. • Maintain responsible handling practices related to firefighting foam, fuel, hazardous materials, and operational waste within assigned work areas. Safety Management System (SMS) • Assist in the implementation of Safety Management System (SMS) requirements during operational and emergency response activities. • Identify and report operational hazards, unsafe conditions, equipment defects, and safety concerns through approved reporting procedures. • Follow approved operational safety practices, PPE requirements, and safe system of work during all duties. • Participate in operational investigations, safety briefings, and corrective action implementation activities where assigned. • Promote safety awareness and responsible operational conduct during routine and emergency duties.</p><p>Education Bachelor’s degree or equivalent qualification (Essential). Experience • Minimum 6 years of progressive experience in Aircraft Rescue and Firefighting operations. • Experience in Aerodrome Category 8 or above airport operations preferred. • Additional consideration may be given to candidates possessing operational experience on NAFFCO CFTs. Computer Skills Working knowledge of MS Office Language Skills English: Proficient written and spoken communication skills (Essential). Arabic: Desirable Training Requirements • Basic ARFF training certificate from a recognised aviation firefighting training institution • Heavy vehicle driving license and driving & operation of crash fire tenders Physical Standards • Physically and medically fit to perform operational firefighting and rescue duties. • Ability to perform operational duties involving firefighting PPE, breathing apparatus, rescue operations, and emergency response activities.</p>

<p><h4>Essential responsibilities:</h4> <p>Aerostat operators/user-level maintainers will participate in the overall, hands-on operation of the aerostat system including launch, in-flight, recovery, and moored activities.</p> <p>Candidates will perform all functions to operate the PGSS/PTDS, an aerostat mounted intelligence, surveillance, and reconnaissance (ISR) platform, its mobile mooring platform (MMP), sensor payload(s), communications and navigation systems as well as associated support equipment (boom lift, forklift, all terrain vehicles (ATVs), and electrical power generators).</p> <p>Candidate will perform user-level maintenance functions including performing hands-on preventative maintenance checks and services (PMCS), troubleshooting, removing and replacing line replaceable units (LRUs), and removing and replacing payloads.</p> <p>Candidate must possess a diverse range of skills with the ability to quickly adapt to new situations. Tasks will be performed under direction of higher classified technicians and/or site personnel.</p> <h4>Minimum requirements:</h4> <ul> <li>High school diploma or equivalent is required.</li> <li>Two-year associate’s degree in a technical field from an accredited college can substitute for work experience.</li> <li>Must have an active secret US government clearance or the ability to obtain a secret clearance. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must have a valid U.S. passport with a minimum of one year remaining.</li> <li>Must have valid US driver’s license.</li> <li>Knowledge of and experience in the operations of hardware systems and components.</li> <li>Experience in fault detection, isolation, and correction of hardware systems and individual components.</li> <li>Ability to perform routine system maintenance and analysis functions including: hardware configurations; adding, removing and replacing hardware components; use of hardware and software diagnostic testing tools; reading of electronic circuit schematics; and repairing printed circuit boards.</li> <li>At least one (1) year previous aerostat experience OR two (2) years of experience in the following areas may be substituted in lieu of aerostat experience:</li> </ul> <p><strong>1) Electrical maintenance mechanic</strong></p> <ul> <li>Possess at least two (2) years aerostat experience as an operator at the 20 series level or greater from Army MOS 35F (Intelligence Analyst), 35G (Geospatial Intelligence Imagery Analyst), 35H (Common Ground System Analyst), 96R (Ground Surveillance Systems Operator), 96U (Unmanned Aerial Vehicle Operator), or military branch equivalent.</li> <li>Two years of hands-on experience in performing operations and maintenance tasks either on an aerostat system or a related industry/military equivalent is required.</li> <li>Must be qualified at the 10 series or greater level (via military or civilian technical schools) is required.</li> <li>Ability to read electronic schematics.</li> <li>O&M of electro-mechanical equipment to include one or more of the following: <ul> <li>Hydraulic/servo valves</li> <li>Hydraulic actuators, control systems</li> <li>Test and diagnostic equipment</li> </ul> </li> </ul> <p><strong>2) Networking, IT & information systems</strong></p> <ul> <li>Two years’ experience is required.</li> <li>Must be qualified at the 10 series or greater level; MOS 25B/F or other military branch equivalent or industry occupational specialties as a CISCO Network Administrator; Army MOS 25L/N or other military branch equivalent or industry occupational specialties as a Network Installation (BICSI or Network + or Comp T Certification) will be considered.</li> <li>CCIE certification with fiber optic certification is preferred.</li> </ul> <p><strong>3) Mechanical maintenance</strong></p> <ul> <li>Mechanical maintenance with qualifications at the 10 series or greater from U.S. Army MOS 94D/X and 91/B/S/W or other military branch equivalent, or industry occupational specialties such as National Institute for Automotive Service Excellence (ASE) Certified Truck Mechanic or Federal Aviation Administration (FAA) General Mechanic 1 or greater.</li> <li>Two years of hands-on experience on an aerostat system or a related industry/military equivalent is required.</li> <li>O&M of mechanical equipment to include one or more of the following: hydraulic systems, winch systems, tether/cable handling systems, industrial generator sets, power switch gear, HVAC, cranes aerial lift, forklift, industrial generator sets.</li> </ul> <h4>Physical requirements:</h4> <ul> <li>Requires the ability to regularly lift up to 50 lbs.</li> <li>Requires the ability to regularly climb extension ladders, roof ladder, stepladders, and stairs at least 10 times during shift.</li> <li>Requires the flexibility to bend/stoop, squat repetitive during shift.</li> <li>Requires the ability to regularly kneel repetitive for shift.</li> <li>Requires the ability to move in a 90-degree fashion on a repetitive basis for shift.</li> <li>Requires the ability to stretch/reach on a repetitive basis for shift.</li> <li>Requires the ability to walk extensively throughout the plant during shift.</li> <li>Requires the ability to interact with all clients in a professional and friendly manner despite periods of stress.</li> </ul> <h4>Medical requirements:</h4> <p>Successfully complete and pass the medical and dental examinations as required by the employer and customer for deployment to Iraq.</p> <p>Must maintain physical and dental requirements for the duration of the deployment.</p> <h4>Working and living conditions:</h4> <p>This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environment. Temperatures can reach 120-130 degrees Fahrenheit/50-55 degrees Celsius during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to CENTCOM, EUCOM, and AFRICOM for extended periods. Work schedules are a minimum of 6 days per week and 10 hours per day, while some jobs have higher daily and weekly minimums.</p></p><p></p>

<p><h4>Essential responsibilities:</h4> <p>Aerostat operators/user-level maintainers will participate in the overall, hands-on operation of the aerostat system including launch, in-flight, recovery, and moored activities.</p> <p>Candidates will perform all functions to operate the PGSS/PTDS, an aerostat mounted intelligence, surveillance, and reconnaissance (ISR) platform, its mobile mooring platform (MMP), sensor payload(s), communications and navigation systems as well as associated support equipment (boom lift, forklift, all terrain vehicles (ATVs), and electrical power generators).</p> <p>Candidate will perform user-level maintenance functions including performing hands-on preventative maintenance checks and services (PMCS), troubleshooting, removing and replacing line replaceable units (LRUs), and removing and replacing payloads.</p> <p>Candidate must possess a diverse range of skills with the ability to quickly adapt to new situations. Tasks will be performed under direction of higher classified technicians and/or site personnel.</p> <h4>Minimum requirements:</h4> <ul> <li>High school diploma or equivalent is required.</li> <li>Two-year associate’s degree in a technical field from an accredited college can substitute for work experience.</li> <li>Must have an active secret US government clearance or the ability to obtain a secret clearance. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must have a valid U.S. passport with a minimum of one year remaining.</li> <li>Must have valid US driver’s license.</li> <li>Knowledge of and experience in the operations of hardware systems and components.</li> <li>Experience in fault detection, isolation, and correction of hardware systems and individual components.</li> <li>Ability to perform routine system maintenance and analysis functions including: hardware configurations; adding, removing and replacing hardware components; use of hardware and software diagnostic testing tools; reading of electronic circuit schematics; and repairing printed circuit boards.</li> <li>At least one (1) year previous aerostat experience OR two (2) years of experience in the following areas may be substituted in lieu of aerostat experience:</li> </ul> <p><strong>1) Electrical maintenance mechanic</strong></p> <ul> <li>Possess at least two (2) years aerostat experience as an operator at the 20 series level or greater from Army MOS 35F (Intelligence Analyst), 35G (Geospatial Intelligence Imagery Analyst), 35H (Common Ground System Analyst), 96R (Ground Surveillance Systems Operator), 96U (Unmanned Aerial Vehicle Operator), or military branch equivalent.</li> <li>Two years of hands-on experience in performing operations and maintenance tasks either on an aerostat system or a related industry/military equivalent is required.</li> <li>Must be qualified at the 10 series or greater level (via military or civilian technical schools) is required.</li> <li>Ability to read electronic schematics.</li> <li>O&M of electro-mechanical equipment to include one or more of the following: <ul> <li>Hydraulic/servo valves</li> <li>Hydraulic actuators, control systems</li> <li>Test and diagnostic equipment</li> </ul> </li> </ul> <p><strong>2) Networking, IT & information systems</strong></p> <ul> <li>Two years’ experience is required.</li> <li>Must be qualified at the 10 series or greater level; MOS 25B/F or other military branch equivalent or industry occupational specialties as a CISCO Network Administrator; Army MOS 25L/N or other military branch equivalent or industry occupational specialties as a Network Installation (BICSI or Network + or Comp T Certification) will be considered.</li> <li>CCIE certification with fiber optic certification is preferred.</li> </ul> <p><strong>3) Mechanical maintenance</strong></p> <ul> <li>Mechanical maintenance with qualifications at the 10 series or greater from U.S. Army MOS 94D/X and 91/B/S/W or other military branch equivalent, or industry occupational specialties such as National Institute for Automotive Service Excellence (ASE) Certified Truck Mechanic or Federal Aviation Administration (FAA) General Mechanic 1 or greater.</li> <li>Two years of hands-on experience on an aerostat system or a related industry/military equivalent is required.</li> <li>O&M of mechanical equipment to include one or more of the following: hydraulic systems, winch systems, tether/cable handling systems, industrial generator sets, power switch gear, HVAC, cranes aerial lift, forklift, industrial generator sets.</li> </ul> <h4>Physical requirements:</h4> <ul> <li>Requires the ability to regularly lift up to 50 lbs.</li> <li>Requires the ability to regularly climb extension ladders, roof ladder, stepladders, and stairs at least 10 times during shift.</li> <li>Requires the flexibility to bend/stoop, squat repetitive during shift.</li> <li>Requires the ability to regularly kneel repetitive for shift.</li> <li>Requires the ability to move in a 90-degree fashion on a repetitive basis for shift.</li> <li>Requires the ability to stretch/reach on a repetitive basis for shift.</li> <li>Requires the ability to walk extensively throughout the plant during shift.</li> <li>Requires the ability to interact with all clients in a professional and friendly manner despite periods of stress.</li> </ul> <h4>Medical requirements:</h4> <p>Successfully complete and pass the medical and dental examinations as required by the employer and customer for deployment to Iraq.</p> <p>Must maintain physical and dental requirements for the duration of the deployment.</p> <h4>Working and living conditions:</h4> <p>This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environment. Temperatures can reach 120-130 degrees Fahrenheit/50-55 degrees Celsius during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to CENTCOM, EUCOM, and AFRICOM for extended periods. Work schedules are a minimum of 6 days per week and 10 hours per day, while some jobs have higher daily and weekly minimums.</p></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Responsible for the supervision of an assigned aircraft or structural firefighting crew on an alternating shift, supervising all assigned crew members in fire ground situations as well as the performance of care and maintenance of apparatus and equipment as defined in the current task order, Performance Work Standard (PWS), and as directed by Vectrus. Responsible for implementing and maintaining all fire protection services related functional standards within their assigned department IAW the Statement of Work. Implements the Fire Chief s comprehensive firefighting program at the assigned installation to ensure compliance with AR 420-1, Army Facilities Management, Chapter 25, Fire and Emergency Services, Local work instructions, and National Fire Protection Association (NFPA) Guidelines.</p><p>This position description is subject to change at any time as needed to meet the requirements of the program or company. Reports to the Assistant Chief of Operations and functions under their direct supervision. Supervises a structural and/or aircraft firefighting crew at assigned fire department to ensure compliance with PWS and all local requirements are met. Assigns, directs, and reviews the work of assigned subordinate employees who assist in carrying out program activities. Ensure timely submittal of CDRL, deliverable, and work product reports pertaining to the operations section as required. Ensure scheduling of required fire protection equipment inspections to comply and meet PWS requirements for the department. Prevents loss of life and minimizes damage to property and the environment from fire by directing fire attack, confinement, salvage, overhaul, ventilation and rescue activities, to include performing emergency medical care and CPR. Protects and preserves evidence at a fire scene and may participate in investigation of fire incidents. Assures that procedures are affected; station logs and other records pertinent to reports, activities, drills, equipment inspections, etc., are maintained properly and submitted within time limits, if required. Maintains current knowledge of the base, its structures, and all systems related to fire protection. Ensures related firefighting duties are accomplished and documented as outlined in the PWS and department work instructions. When aircraft/facility pre-fire plans are outdated, develop and provide updates. Performs required operators maintenance and tests on rescue tools and saws, ground ladders, fire hose, ropes, harnesses and hardware; serviceable inspections of firefighters protective firefighting clothing; and enforces mandated standards for a respiratory protection program for self-contained breathing apparatus (SCBA). Participates in career and proficiency training programs designed to increase technical proficiency of firefighters. Provide and conducts scheduled training as prescribed by the Fire Chief s Annual Training Plan and as scheduled by the Assistant Fire Chief. When first to arrive on-scene, serves as the incident commander of a fire/crash scene until relieved by the Assistant Fire Chief. Determines the best course of action to minimize loss or damage from fires or explosions. Directs the placement of firefighting equipment and personnel to ensure maximum utilization in fire control of aircraft crash/rescue operations. Assesses the fire scene/emergency situation to facilitate fire/rescue operations and to brief the Assistant Fire Chief upon arrival. Leads and directs assigned firefighting crew to provide safe and proper rescue operations of endangered persons. Ensures rescue operations are performed in accordance with established policies and procedures and minimize the risk of additional danger to firefighting personnel and endangered persons. Employs firefighting measures to minimize the loss or damage as a result of fire or explosions. Responds to hazardous material incidents; leads operations level actions, as directed by the Assistant Fire Chief, to establish control of the affected area with minimal risk to response As required and/or assigned, oversees fire alarm communication center operations to ensure all firefighting equipment and personnel are dispatched as required. Ensures that the communications center is manned at all times during the shift. Oversees the checkout of communications equipment at the beginning of the shift. As necessary, details additional personnel in case of short staffing. Maintains constant contact with the communications center during real world emergencies or fire drills. Ensures the maintenance of reference materials such as the NFPA Standards, IFSTA Training Manuals, Lesson Plans, and reviews and provides input to work instructions pertaining to the operations, training, and communications sections of the department. Performs mid-level supervisory personnel management responsibilities. Advises and provides counsel to employees regarding policies, procedures, and directives of management. Explains performance expectations to employees and provides regular feedback on strengths and weaknesses. Holds employees responsible for satisfactory completion of work assignments. Appraises subordinate workers performance ensuring consistency and equity in rating technique Performs other duties and assignments as required or as directed by the Assistant Fire Chief or Fire Chief.</p><p>Must be capable of working in an extreme weather conditions with temperatures exceeding 120 degrees Fahrenheit. Indoor and/or outdoor environment with very adverse and harsh conditions (i.e., hot, dry, dusty, desert environment with average temperatures of 30 degrees in the winter and 130 degrees in the summer months). Includes some industrial production environment conditions as well. Heavy work. Exerting up to 100 pounds of force occasionally, and/or up to 50 pounds of force frequently, and/or up to 50 pounds of force constantly to move objects. Work may require heavy lifting, stooping, climbing, prolonged standing, prolonged sitting, and working with or in areas where a potential could exist for exposure to physical, chemical, or biological agents. Employee use of personal protective equipment (PPE) is required for some situations. PPE includes, but is not limited to, head, foot, torso, respiratory, vision, and hearing protective devices. Must comply with all Fire and Safety Regulations and post policies.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>One year related experience may be substituted for one year of education, if degree is required.</li><li>Must be a U.S. Citizen</li><li>Must be able to pass annual firefighter Occupational Health Exam and SCBA Fit Testing IAW NFPA 1582 and 1583</li><li>Certifications: Must possess current DoD (IFSAC/PROBOARD) certifications for: Fire Officer I, Fire Inspector I, Fire Instructor I, Airport Fire Fighter, Hazardous Materials - Operations, and Driver/Operator ARFF and Pumper, Mobile Water Supply</li><li>Must possess current CPR and First Aid First Responder certification</li><li>Required to have IFSAC or Pro-Board Certification</li><li>Undergraduate Degree preferred or equivalent work-related experience</li><li>Minimum of (7) Seven years of related work experience.</li><li>Minimum of three years of leadership experience.</li><li>Preferred: 3 Years experience as a Firefighter Crew Chief</li><li>Working knowledge of Microsoft Office (Word, Excel and Outlook)</li><li>Supervises a shift and crew for response readiness.</li><li>Performs training to his/her crew IAW with Assistant Chief training plan.</li><li>Excellent computer, interpersonal, and oral and written communication skills required.</li><li>Computer skills include a working knowledge of Microsoft Word, Excel, Outlook</li><li>Requires excellent organizational skills; with the ability to work under fast paced and adverse conditions.</li><li>Knowledge of fire protection mission and organization; fire safety requirements and objectives; firefighting and rescue procedures and techniques, firefighter training requirements, firefighting apparatus and equipment, alarm and suppression system operation; water supply systems; hazardous materials.</li><li>Required to have the requisite knowledge to maintain and operate: Fire apparatus firefighting pumps Firefighting/Rescue equipment, to include but not limited to, air, hydraulic, and hand tools Vehicle mounted and portable firefighting pumps Mounted fire suppression systems (Dry Chemical) Attack lines and Master Streams Self-Contained Breathing Apparatus (SCBA)</li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Job Description: Senior Maintenance Technician – Water Cup Production Line Department: Engineering and Maintenance Industry: Packaged Water / Water Cup Manufacturing Employment Type: Full-time Number of Vacancies: 2 Reports To: Maintenance Supervisor Supervisory Responsibility: Shift maintenance team when assigned Preferred Nationality: Indian/Iranian Job Purpose Provide senior-level, hands-on maintenance support for high-speed thermoforming/Form-Fill-Seal water cup production lines.<br> The Senior Maintenance Technician will lead shift maintenance work, diagnose complex faults, perform precision adjustments, and support preventive and major maintenance activities.<br> Key Responsibilities Implement daily, weekly, monthly, and shutdown maintenance plans.<br> Lead technicians during scheduled maintenance and production-line breakdowns.<br> Diagnose complex mechanical faults and production-related machine problems.<br> Perform machine setup, changeovers, adjustment, alignment, and synchronization.<br> Inspect machine condition and identify developing faults before failure occurs.<br> Carry out preventive, corrective, and major maintenance activities.<br> Escalate recurring faults and support root-cause analysis.<br> Record completed work, findings, parts used, and follow-up actions.<br> Identify future maintenance requirements and critical spare-parts needs.<br> Monitor recurring component failures and recommend technical improvements.<br> Assist with installation, commissioning, and overhaul work when required.<br> Train mechanical technicians and selected production operators.<br> Coordinate with production personnel during adjustment and test runs.<br> Assume responsibility for the maintenance team when the supervisor is unavailable.<br> Follow food-safety, personal-safety, lockout/tagout, and housekeeping requirements.<br> Required Technical Experience Candidates must have practical experience across the complete thermoforming/FFS water cup process: Film feeding, tracking, tensioning, and alignment Heating-zone inspection and adjustment Thermoforming stations, molds, vacuum, and cooling Filling systems, pumps, valves, nozzles, and volume adjustment Lid-film feeding, tracking, and tension control Heat-sealing temperature, pressure, timing, and alignment Cutting, punching, and cup-discharge mechanisms Pneumatic cylinders, solenoid valves, regulators, and air systems Bearings, chains, sprockets, timing belts, shafts, and gearboxes Linear guides, conveyors, lubrication systems, and mechanical alignment Candidates must be able to troubleshoot: Poor or incomplete cup forming Film tracking and alignment problems Water leakage and inaccurate filling volume Weak, incomplete, or uneven sealing Cutting and punching defects Mechanical timing and synchronization problems Abnormal vibration, noise, and overheating Repeated stoppages and intermittent machine faults Experience with Thermonox, Beta-Pak, or technically similar high-speed machines is strongly preferred.<br> Required Qualifications Technical diploma or equivalent qualification in Mechanical Maintenance, Mechanical Engineering, Mechatronics, or a related field.<br> Minimum 5–7 years of direct experience on thermoforming/FFS cup production machines.<br> Ability to lead maintenance work during shifts and breakdowns.<br> Strong practical knowledge of precision fitting, alignment, and adjustment.<br> Ability to interpret machine manuals, drawings, and spare-parts diagrams.<br> Basic ability to prepare maintenance records and technical reports.<br> Ability to train and guide junior technicians.<br> Willingness to work shifts and respond to urgent breakdowns.<br> Critical Selection Requirement Applicants must have direct experience maintaining machines that form, fill, and seal plastic water cups.<br> Experience limited to bottled-water lines, RO systems, vehicles, buildings, utilities, or general factory maintenance does not meet the position’s core requirement.<br></span> </div>

<p>Handle customer inquiries and requests through calls, email, live chat, social media and other communication channels. Escalate unresolved or complex issues to the relevant department and follow up until closure. Maintain detailed and accurate records of customer interactions, transactions and complaints. Contribute to achieving team performance targets, customer satisfaction goals and operational KPIs. Adhere to the quality standards and service level agreements (SLAs) for response times, resolution times, and customer satisfaction.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in Business Administration or relative field.</li><li>Fluency in Kurdish (Spoken, Reading and writing) and Arabic is mandatory; basic knowledge of English is required.</li><li>Ability to work on a shift rotation.</li><li>Minimum of 1 year experience in customer service or a related field</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>About Zaincash ZainCash Iraq is a leading mobile wallet in Iraq and recognized as Forbes top Fintech company of 2023 and 2024 as well as GSMA’s Best Mobile Innovation Supporting Humanitarian Situations.<br> The company offers a range of consumer and business services including local and international money transfer, bill payments, companion payment cards, payroll, aid disbursement, and more.<br> For more information, please visit www.<br>zaincash.iq. Responsibilities: Handle customer inquiries and requests through calls, email, live chat, social media and other communication channels.<br> Escalate unresolved or complex issues to the relevant department and follow up until closure.<br> Maintain detailed and accurate records of customer interactions, transactions and complaints.<br> Contribute to achieving team performance targets, customer satisfaction goals and operational KPIs.<br> Adhere to the quality standards and service level agreements (SLAs) for response times, resolution times, and customer satisfaction.<br> Education: Bachelor’s degree in Business Administration or relative field.<br> Languages: Fluency in Kurdish (Spoken, Reading and writing) and Arabic is mandatory; basic knowledge of English is required.<br> Availability: Ability to work on a shift rotation.<br> Experience: Minimum of 1 year experience in customer service or a related field</span> </div>

<p><h4>Job description</h4> <p><strong>Male gym supervisor (IFMS – KBR operated oil & gas site)</strong></p> <p><strong>Contract:</strong> Integrated Facilities Management Services (IFMS)<br> <strong>Employer:</strong> KBR (or KBR-appointed IFMS subcontractor)<br> <strong>Client:</strong> KBR<br> <strong>Location:</strong> Remote / camp-based oil & gas asset<br> <strong>Reporting to:</strong> KBR IFMS FM manager / FM deputy manager</p> <h4>Job purpose</h4> <p>The physical training centre supervisor is responsible for the safe, compliant, and effective management of the physical training and fitness facility under the KBR IFMS contract, ensuring full alignment with:</p> <ul> <li>KBR HSSE management system</li> <li>Applicable local regulatory requirements</li> </ul> <p>The role supports workforce health, wellbeing, and fatigue management while reinforcing IFMS Goal Zero, Life-Saving Rules, and KBR’s Beyond Zero safety culture.</p> <h4>Key responsibilities</h4> <p><strong>1. HSSE leadership & compliance</strong></p> <ul> <li>Demonstrate visible HSSE leadership in line with KBR Zero Harm</li> <li>Ensure strict compliance with: <ul> <li>Life-Saving Rules</li> <li>MFDS Permit to Work (PTW) and isolation requirements (where applicable)</li> <li>KBR and IFMS HSSE procedures</li> </ul> </li> <li>Develop, implement, and maintain: <ul> <li>Risk assessments (RA)</li> <li>Task risk assessments (TRA)</li> <li>Job safety analyses (JSA) for all fitness activities</li> </ul> </li> <li>Ensure emergency preparedness including: <ul> <li>First aid and AED readiness</li> <li>Clear emergency response procedures within the facility</li> </ul> </li> <li>Report and investigate: <ul> <li>Incidents</li> <li>Near misses</li> <li>Unsafe acts and conditions</li> </ul> using KBR approved reporting systems </li> <li>Support and participate in: <ul> <li>HSSE audits</li> <li>Site inspections</li> <li>Assurance and compliance reviews</li> </ul> </li> </ul> <p><strong>2. Facility operations & asset integrity</strong></p> <ul> <li>Manage daily operations of the physical training centre, including: <ul> <li>Gymnasium</li> <li>Functional training spaces</li> <li>Games areas (inside and outside)</li> <li>Stretching and group exercise areas</li> <li>Swimming and sauna areas</li> </ul> </li> <li>Ensure the facility is: <ul> <li>Clean, hygienic, and orderly</li> <li>Safe, ventilated, and fit for purpose</li> <li>Operated within approved capacity</li> </ul> </li> <li>Conduct and record daily, weekly, and monthly equipment inspections</li> <li>Coordinate planned preventive maintenance (PPM) and corrective maintenance through maintenance teams</li> <li>Ensure fitness equipment is certified, serviceable, and used in accordance with manufacturer requirements, including pool maintenance</li> <li>Control access and prevent misuse of equipment</li> </ul> <p><strong>3. Fitness programmes & user safety</strong></p> <ul> <li>Deliver or supervise fitness programmes suitable for: <ul> <li>Shift workers</li> <li>Rotational personnel</li> <li>Physically demanding roles</li> </ul> </li> <li>Conduct mandatory gym inductions for all users</li> <li>Ensure users are briefed on: <ul> <li>Safe exercise techniques</li> <li>Personal responsibility for fitness activities</li> </ul> </li> <li>Support injury prevention, mobility, and fatigue management initiatives</li> <li>Coordinate with: <ul> <li>Site ISOS medical team</li> <li>KBR HSSE team</li> </ul> for wellness, rehabilitation, or return-to-work support </li> </ul> <p><strong>4. Supervision & IFMS administration</strong></p> <ul> <li>Supervise gym attendants, fitness instructors, or subcontracted staff (if applicable)</li> <li>Enforce discipline, behavioral standards, and professional conduct aligned with: <ul> <li>KBR code of conduct</li> <li>KBR values and ethics</li> </ul> </li> <li>Maintain accurate records for: <ul> <li>User inductions</li> <li>Attendance</li> <li>Equipment inspections</li> <li>HSSE documentation</li> </ul> </li> <li>Provide input to monthly IFMS reports and KPIs including: <ul> <li>Facility utilization</li> <li>HSSE observations</li> <li>Incidents / near misses</li> <li>Equipment availability</li> </ul> </li> <li>Deliver toolbox talks and participate in KBR HSSE meetings as required</li> <li>Prepare fitness programs, welfare event calendars, and manage sports events</li> </ul> <p><strong>5. Client & stakeholder interface</strong></p> <ul> <li>Act as the primary interface for fitness facility matters between: <ul> <li>KBR IFMS staff</li> <li>KBR HSSE and site services providers</li> <li>Site medical team</li> </ul> </li> <li>Address client observations, workforce feedback, and corrective actions</li> <li>Support field wellbeing campaigns and continuous improvement initiatives</li> <li>Represent KBR IFMS in a professional and client-focused manner at all times</li> </ul> <h4>Qualifications & certifications</h4> <p><strong>Essential</strong></p> <ul> <li>Formal qualification in: <ul> <li>Physical training</li> <li>Sports science</li> <li>Physical education</li> <li>Fitness instruction</li> </ul> </li> <li>Certified fitness instructor / personal trainer</li> <li>Valid first aid, CPR, and AED certification or medical experience</li> </ul> <p><strong>Desirable</strong></p> <ul> <li>NEBOSH IGC / IOSH Managing Safely or equivalent</li> <li>Experience working under KBR IFMS contracts</li> <li>Prior experience on Majnoon or IOC operated sites</li> <li>Mental health or wellbeing programme awareness</li> </ul> <h4>Experience</h4> <ul> <li>Minimum 3–5 years’ experience supervising a fitness or training facility</li> <li>Experience in remote, industrial, or high-risk environments</li> <li>Oil & gas, EPC, EPCM, or construction camp experience preferred</li> </ul> <h4>Competencies & behaviours</h4> <ul> <li>Strong HSSE awareness with proactive hazard identification</li> <li>Demonstrates Shell and KBR safety leadership behaviours</li> <li>High personal integrity and professionalism</li> <li>Effective communicator with multicultural teams</li> <li>Organised, resilient, and capable of working independently</li> <li>Physically fit and able to safely demonstrate training techniques</li> </ul> <h4>Working conditions</h4> <ul> <li>Remote onshore oil & gas location</li> <li>Rotational schedule (e.g. 28/28)</li> <li>Camp accommodation</li> <li>Hot and dusty environmental conditions</li> <li>Flexible hours to support shift patterns</li> </ul> <h4>HSSE & performance expectations</h4> <ul> <li>Zero harm mindset</li> <li>Full compliance with: <ul> <li>KBR HSSE management system</li> <li>IFMS contract obligations</li> </ul> </li> <li>Immediate intervention for unsafe acts or conditions</li> <li>Continuous improvement focus</li> </ul></p><p></p>