Architect Jobs in Iraq

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Lead Interface Engineer<br><br><p><b>Job Description</b></p><br><br><p>Division: CSSP (Ratawi Hub – Iraq) </p><br><br><p>Direction&nbsp;: IM</p><br><br><p><b>Job title: Lead Interface Engineer</b></p><br><br><p><b>Situation in organization</b></p><br><br><p>Within the Project Organization, the Lead Interface Engineer is reporting to the Interface Manager</p><br><br><p>Job Location(s): CPP Office (Abu Dhabi, UAE) during Detailed Engineering Phase / SITE (Iraq) during Construction Phase</p><br><br><p><b>Job dimensions</b></p><br><br><p>The Lead Interface Engineer shall assist the Interface Manager on the following:</p><br><br><ul><li>take care of the overall Management of interface and data changes between stakeholders of the Common Seawater Supply Project, and provide advice on any schedule &amp; commercial issues arising from such interfaces and changes</li><li>ensure that Interfaces Management procedures are in place and that EPC and other contractors implement the required interface management system throughout the project duration</li></ul><p>The Lead Interface Engineer is anticipated to start early 2026 and will be based in Abu Dhabi (UAE).</p><br><br><p><b>Activities</b></p><br><br><p>The job holder shall assist the Interfaces Manager:</p><br><br><ul><li>with the support of the Project Management Consultant, define, implement and maintain the methodology/procedure to be applied and the corresponding database to be created, to ensure a clear and accurate identification and management of interfaces. This procedure will be as efficient and simple as possible and will be used throughout the life of the project and shall be applied by the different entities/ Contractors.</li><li>Management of interface and change data between parties, monitor and control interface and change issues, in order to resolve interface and change issues in a timely and organised manner according to the project interface and change control procedures.</li><li>Attend major interface meetings, internal and external with other entities of CSSP Project, Contractor representatives, Vendors, TotalEnergies specialists, Partner’s experts, etc. Lead interface and other technical meetings as required.</li><li>Ensure that HSE requirements are systematically considered all along the interface management process and in particular that interfaces are properly addressed during HAZID/HAZOP/PTR project audits.</li><li>Consolidate and advise the Project Director and Technical and Project Control Managers of any risks specially schedule &amp; commercial issues arising from interfaces and changes. Shall be the coordinator of the Management of Change, providing the justification through all disciplines of the change. Ensure complete documentation of all changes, and communication of these in compliance with the processes agreed with BOC and regulatory authorities.</li><li>Preparing technical papers to support management positions for clarifications / decisions with regulatory authorities of host countries, other entities or partners.</li><li>Ensure that EPC Contractor implements required interface management system &amp; resources and monitor throughout the project duration that EPC Contractor honours its responsibilities as defined in the project interface procedure.</li><li>Ensure the implementation of interface changes/optimisations resulting from negotiations of the external interfaces.</li><li>Together with Project Management Consultant, ensure design consistency and continuity throughout the facilities.</li><li>Avoid change orders and delays caused by interface issues; ensure timely follow-up of interface issues.</li><li>Assist the Project Management Consultant, prior to and during construction phase, by anticipating operational interfaces with other parties (clashes or conflicting program).</li><li>In case of SIMOPS (phased delivery of the plant): propose solutions and participate to definition and resolution.</li></ul><p><b>Context and environment</b></p><br><br><br><p>Basrah Oil Company (BOC) is undertaking the Seawater Treatment Facilities (STF) project to provide treated seawater to the oil fields in southern Iraq (for injection). The STF will be located on the west side of the Khor Al Zubair, upstream of the port of Umm Qasr and will have the following key components:</p><br><br><ul><li>Site development and non-process facilities.</li><li>Ancillaries and buildings.</li><li>Seawater intake and outfall structures.</li><li>Material off-loading facility.</li><li>Seawater clarification, filtration and deoxygenating processes.</li><li>Chemical addition systems.</li><li>Shipping pumps.</li><li>Power Generation.</li><li>Utilities.</li></ul><p>FEED was completed (June 2016) with Phase 1 capacity of 7.5 million barrels of water per day (MMBWPD) of treated seawater, with a subsequent Phase 2 of 5 MMBWPD for a total buildout capacity of 12.5 MMBWPD. The project was placed on hold upon the completion of FEED.</p><br><br><p>In 2018 BOC launched a call for tender on the FEED, but instructed bidders to reduce capacity to 5.0 MMBWPD, with provision for a future addition of 2.5 MMBWPD for a total build-out phase of 7.5 MMBWPD.</p><br><br><br><p><b>Accountabilities</b></p><br><br><ul><li>Accountable for the interfaces and MoC, being internal (between units, disciplines, PMT, One Tech and Specialists) or external (between other CSSP Projects, Contractors, COMPANY, etc…). The job holder coordinates all interface and MoC matters, protecting the WI Project and COMPANY’s position with regards to all external interfaces and to internal interfaces between Contractors, and ensuring that changes are evaluated and executed for the overall benefit of the Project.</li><li>Accordingly, the job holder shall make the necessary coordination between all involved Contractors/parties and Company Teams and implement an agreed interface management procedure and methodology. She/He shall ensure the proper and timely follow-up and resolution of interfaces issues between the various involved parties documents. She/He must support the Interface Manager to ensure full control of the Management of Change process, and shall document all the changes, taking care to perform a full review with various disciplines with Project aspects to justify or reject the change.</li><li>A key aspect of interface coordination is the ability to effectively communicate, across all involved parties, all details related to an interface, including requirements, technical specifications, and potential issues. It is important that the communication channel is promptly established, the proper information is exchanged, and all involved parties acknowledge that they fully understand the interface requirements.</li><li>The nature of the development might call for a “staged” delivery of the facilities. Simultaneous activities between construction activities and operations activities can occur to meet the agreed schedule.</li></ul><br><p><b><u>Qualification:</u></b></p><br><br><ul><li><span>Degree in</span> Engineering</li></ul><p><b><u>Experience: </u></b></p><br><br><ul><li>15 years of relevant experience in Industrial Projects.</li><li>A sound multi-discipline technical background complemented by a sound knowledge on Onshore Surveys campaigns and civil works experience.</li><li>Very good communication and interpersonal skills and capacity to work in a “transverse” organisation.</li><li>Mastering English is a must, knowledge of French and Arabic is a plus.</li></ul><br><br><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Role Purpose <br> <p><span>Zain Iraq is actively recruiting to hire an IT Experienced Quality Assurance Engineer who is </span><span>responsible for ensuring the quality and reliability of web, mobile, and API-based applications through manual testing practices. You will work closely with developers, product managers, and other stakeholders to identify defects, validate requirements, and improve the overall user experience.</span></p><br> <br> <br><br> Key Accountabilities <br> <ul><li><p><span>Analyze business and technical requirements, user stories, and acceptance criteria.</span></p><br></li><li><p><span>Create, review, and execute detailed test cases and test scenarios.</span></p><br></li><li><p><span>Perform functional, regression, integration, smoke, sanity, exploratory, and user acceptance testing.</span></p><br></li><li><p><span>Identify, document, track, and verify software defects using bug tracking tools.</span></p><br></li><li><p><span>Conduct API testing using tools such as Postman or Swagger.</span></p><br></li><li><p><span>Validate UI/UX consistency across different browsers, devices, and platforms.</span></p><br></li><li><p><span>Participate in Agile/Scrum ceremonies including sprint planning, stand-ups, grooming, and retrospectives.</span></p><br></li><li><p><span>Collaborate with developers and product teams to ensure timely resolution of issues.</span></p><br></li><li><p><span>Assist in test planning, test estimation, and release validation activities.</span></p><br></li><li><p><span>Maintain testing documentation, reports, and test evidence.</span></p><br></li><li><p><span>Support production issue verification and post-release testing.</span></p><br></li></ul> <br> <br><br> Educational Qualifications and Experience <br> <p><span>Education</span></p><br><ul><li><p><span>Bachelor’s degree in computer science or a related field</span></p><br></li></ul><p><span>Experience</span></p><br><ul><li><p><span>2–3 years of experience in software quality assurance and manual testing.</span></p><br></li><li><p><span>Strong understanding of software development lifecycle (SDLC) and software testing lifecycle (STLC).</span></p><br></li><li><p><span>Experience testing web and mobile applications.</span></p><br></li><li><p><span>Familiarity with API testing tools such as Postman.</span></p><br></li><li><p><span>Experience with defect tracking and test management tools such as Jira or Azure DevOps.</span></p><br></li><li><p><span>Good understanding of Agile methodologies.</span></p><br></li><li><p><span>Basic knowledge of SQL and database validation.</span></p><br></li><li><p><span>Familiarity with mobile testing tools and emulator environments.</span></p><br></li></ul><p><span>Competency</span></p><br><p><span>Behavioural Competency</span></p><br><ul><li><p><span>Achievement Driven</span></p><br></li><li><p><span>Problem Solving and Creativity</span></p><br></li><li><p><span>Analytic Thinking</span></p><br></li><li><p><span>Communication skill</span></p><br></li><li><p><span>Initiative</span></p><br></li></ul><p><span>Technical Competency</span></p><br><ul><li><p><span>Oral and Written Communication</span></p><br></li><li><p><span>Managing Information</span></p><br></li><li><p><span>Technology Application</span></p><br></li><li><p><span>IT User Support</span></p><br></li><li><p><span>IT Business Analysis</span></p><br></li></ul><p><span>IDE Competency</span></p><br><ul><li><p><span>Courage to Engage</span></p><br></li><li><p><span>Addressing Bias</span></p><br></li><li><p><span>Allyship</span></p><br></li></ul> <br> <br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <strong> We are supporting a leading international Oil &amp; Gas operator in Basra to hire an experienced <strong>Wells Civils Data Engineer.<br></strong><br>This is a unique opportunity to contribute to a long-term, high-impact project, working alongside global experts on one of the region’s most strategic energy developments.<br>With over 1500 workers supporting our clients in Iraq, NES has deep insight into their culture and hiring expectations - allowing us to support candidates effectively throughout the hiring process. <br> <br>Job Description <br>Job Title&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;:Wells Civils Data Engineer<br>Job Category&nbsp; &nbsp;:Wells - Drilling, Workover and Well Services<br>Location&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;:Basra (rotational 14:14 subject to change)<br>Role Summary:<br></strong>The Wells Civils Data Engineer reports directly to the Wells Civils Manager. <br>The role is responsible for all data related to civil scope of works for drilling, workovers and well services in the field. As required, may also be responsible for the correlation and updating QAQC &amp; KPI processes.<br>The role is instrumental in maintaining the wells civil databases, strengthening commitment to excellence, operational compliance and efficiency.<strong><strong> <br>Key Responsibilities<br></strong></strong><ul><li>Compile daily contractor reports and prepare the Wells Civils daily report.</li><li>Prepare and correlate the Monthly Dashboard for publication in Power BI.</li><li>Coordinate training requests, manage approvals, send notifications, and track progress.</li><li>Update the Civils Operations Tracker with daily data entries.</li><li>Oversee the Call Out Cost Tracker, ensuring autonomy and accuracy.</li><li>Prepare call outs, input into the cost tracker and send to Civils Team Leader for signatures</li><li>Prepare &amp; issue completion certificates to the Civils Team Leader for required signatures.</li><li>Maintain document controls for the wells folders to ensure all information is current.</li><li>Carry out additional duties as assigned.</li></ul><strong><strong><strong>Qualifications &amp; Experience:<br></strong><br><strong>Essential:</strong><br></strong></strong><ul><li>A minimum of 3 years’ experience in Data Management or a Document Control role within the Oil &amp; Gas industry.</li><li>Demonstrates advanced proficiency in utilizing the Microsoft Office suite of applications.</li><li>Excel expert</li><li>Skilled in MS Project</li><li>English language skills – both written &amp; spoken.</li><li>Arabic Speaker.</li><li>Capable of handling a fast-paced, high-volume work environment with frequent challenges.</li><li>Demonstrated experience in managing dynamic, multi-site operations.</li><li>Strong communicator &amp; team player.</li><li>Attention to detail</li></ul><strong><strong>&nbsp;<br><strong>Preferred:</strong><br></strong></strong><ul><li>A bachelor’s degree in Engineering or a technically related subject is desired or analogous discipline (Scientific).</li><li>International experience preferred Middle East onshore.</li></ul><br> <strong>Why This Opportunity Stands Out:</strong><br>• Long-term project stability (many contractors exceed 10 years)<br>• Exposure to a major global operator<br>• Opportunity to work alongside industry-leading professionals<br><strong> Why Apply Through NES?</strong><br>NES is the world’s leading engineering staffing provider, operating across Oil &amp; Gas, Power, Life Sciences, and infrastructure sectors.<br><ul><li>80+ offices across 45 countries</li><li>24,000+ contractors globally and 10,000+ in the Middle East</li><li>Strong regional presence and long-term client partnerships</li></ul><br> If you find this opportunity matching your skills or if you know someone suitable for the role, please drop your CV on sayali.kothmire@nesfircroft.com<br>With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil &amp; Gas, Power &amp; Renewables, Chemicals, Construction &amp; Infrastructure, Life Sciences, Mining and&nbsp;Manufacturing&nbsp;sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients. <br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><strong>Launch Your Career as a Field Engineer with Weatherford</strong> &nbsp;</p><br><p>Are you ready to kick-start your engineering career in a hands-on, high-impact role? At Weatherford, our Field Engineers are the essential connection between our&nbsp;cutting-edge&nbsp;technologies and the real-world challenges faced in oil and gas rigs. &nbsp;</p><br><p>This is more than just a job —&nbsp;it’s&nbsp;an adventure.&nbsp;You’ll&nbsp;be working in the field, often at remote rig sites, where&nbsp;you’ll&nbsp;gain unmatched experience and responsibility from day one. Whether&nbsp;it’s&nbsp;assembling equipment, analysing data, or solving problems on the fly,&nbsp;you’ll&nbsp;be at the heart of operations that matter. &nbsp;</p><br><p><strong>Your Development Journey</strong> &nbsp;</p><br><p>You’ll&nbsp;be enrolled in our 4-year Field Engineer Technical Development Program, which blends classroom learning with real-world experience: &nbsp;</p><br><ul> <li>Year 1: Work with guidance and take part in hands-on training at one of our global&nbsp;centers. Travel may be needed to gain real-world experience&nbsp;</li> <li>Year 2: Take on more responsibility at the wellsite while continuing to grow your technical skills through hands-on and classroom training&nbsp;</li> <li>Years 3 &amp; 4: Expanding your knowledge and skills, and may lead teams at the wellsite while serving as the main contact for our clients&nbsp;</li></ul><p><strong>Your day-to-day could include: </strong>&nbsp;</p><br><ul> <li>Prepare, deploy, and&nbsp;operate&nbsp;advanced downhole tools to meet specific wellsite objectives&nbsp;</li> <li>Utilize&nbsp;cutting-edge&nbsp;simulation software to design and&nbsp;optimize&nbsp;wellsite solutions tailored to client needs&nbsp;</li> <li>Analyse performance data and recommend improvements &nbsp;</li> <li>Manage equipment&nbsp;logistics&nbsp;and ensure seamless setup and operation at the rig site&nbsp;</li> <li>Create detailed post-job reports and share actionable insights with clients and internal teams&nbsp;</li> <li>Champion a culture of continuous improvement with a strong focus on safety, quality, and performance&nbsp;</li> <li>Deliver front-line engineering support to our customers throughout operations, resolving issues independently&nbsp;</li></ul><p>&nbsp;<strong>What&nbsp;We’re&nbsp;Looking For</strong> &nbsp;</p><br><ul> <li>Graduated with bachelor’s degree in engineering (all fields) within the last 24 months&nbsp;</li> <li>No more than 1 year of experience&nbsp;</li> <li>English language fluent&nbsp;proficiency&nbsp;(written and spoken)&nbsp;</li> <li>Strong communication&nbsp;and interpersonal skills&nbsp;</li> <li>Ability to analyse complex problems, apply critical thinking, and make informed decisions&nbsp;</li> <li>A passion for hands-on work and learning in dynamic environments (onshore and offshore)&nbsp;</li></ul><p><strong>What to Expect</strong> &nbsp;</p><br><p>This role is physically and mentally demanding.&nbsp;You’ll&nbsp;work 12-hour shifts (day or night), often in tough weather conditions. You may be away from home for extended periods, including weekends and holidays. But if&nbsp;you’re&nbsp;up for the challenge, the rewards are big. &nbsp;</p><br><p>You’ll&nbsp;join one of our specialized product lines, such as: &nbsp;</p><br><ul> <li>Completions &nbsp;</li> <li>Drilling Services &nbsp;</li> <li>Wireline Services &nbsp;</li> <li>Artificial Lift &nbsp;</li> <li>Well Services &nbsp;</li> <li>Managed Pressure Drilling…and many more &nbsp;</li></ul><p><strong>Why Join Us?</strong> &nbsp;</p><br><ul> <li>Fast-track your career with structured development and mentorship &nbsp;</li> <li>Work with&nbsp;cutting-edge&nbsp;technology in real-world settings &nbsp;</li> <li>Travel, learn, and grow with a global leader in energy services &nbsp;</li> <li>Open doors to future roles in operations, product management, sales, and more &nbsp;</li></ul><p>Ready to engineer your future? Apply now and start your journey with Weatherford&nbsp;</p><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Lead Mechanical Engineer<br><br><span><u><b>Lead Mechanical Engineer</b></u></span><b>EFLD35 - Principal Technical Professional - Field Engineering</b><br>KBR Sustainable Technology Solutions (STS) provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design capabilities, and smart solutions to optimize planned and operating assets.<b><u>Responsibilities:</u> </b>• Day to day delivery of Mechanical Engineering support for site operations.• Deliver safe and effective operations by managing risks, addressing queries and minor modifications activities.• Collaborates with Central Engineering team to identify and define engineering solutions to reduce risk and grow installed production capacity.• Promotes a culture of open safety reporting and continuous improvement.• Provides immediate front line support for Operations and Maintenance teams to resolve minor issues and escalate more significant issues to the Central Engineering Team.• Ensures asset Mechanical Engineering risks (both static and rotating) are understood, controlled, managed and reduced.• Participates in a variety of asset and project risk assessments• Input into anomaly assessment and resolution plans.• Monitors condition monitoring data and health of static and rotating equipment and associated operating envelopes, recording and investigating all Safe Operating Limit excursions.• Monitors static/rotating equipment KPIs and initiates corrective actions as necessary.• Provides Mechanical support to technical MoCs and Engineering Queries• Acts as technical interface with Projects and Modifications organisation, including development of Statement of Requirements (SOR) and Project Initiation Requests (PIRs) and Decision Support Packages (DSP)• Supports delivery of Production Efficiency Improvement and Defect Elimination processes (including simple investigations for deferrals and vulnerabilities)• Identifies production vulnerabilities and optimization opportunities to support production forecast and grow IPC.• Performs follow-up actions and observations from self-verification checks that are related to Mechanical Engineering• Participates in Start Up Readiness and Assurance Reviews• Provides coaching to junior engineers.<br><u><b>Experience, Qualifications &amp; Key Skills</b></u>• Above 10 Years experience in O&amp;G industry (Preferable with IOC’s direct or contract)• Professional (Chartered) Engineer Preferred• Technical degree in Mechanical Engineering or allied engineering subject.• Experience in previous asset engineering / operations support engineering role• Practical exposure to production facilities• Excellent communication, interpersonal and coaching skills• Strong bias for being proactive and getting results• Excellent IT skills – Office suite, document management, applications for CMMS and Change Management.• Contribute to an environment in which all team members are respected regardless of their individual differences and are motivated to improve both their individual and team contributions to achieve desired business results• Skilled in behavior change management<br><u><b>Preferred Qualifications:</b></u><ul><li>Certified Professional Engineer</li></ul><br><p><b>Belong. Connect. Grow. with KBR! </b></p><br><br><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Lead Process Engineer<br><br><p><b>Job Description</b></p><br><br><br><p><b>Position: Lead Process Engineer</b></p><br><br><p><b>Company: KBR </b></p><br><br><p><b>Project: Majnoon</b></p><br><br><p><b>Location: Basra. 28/28 rotation</b></p><br><br><br><p><b><i>"Belong, Connect, Grow, with KBR!</i></b></p><br><br><br><p><b><i>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</i></b></p><br><br><br><p><b><i>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets."</i></b></p><br><br><br><p><b>Position: Lead Process Engineer</b></p><br><br><p><b>Company: KBR </b></p><br><br><p><b>Project: Majnoon</b></p><br><br><p><b>Location: Basra. 28/28 rotation</b></p><br><br><br><p><b>Job Purpose</b></p><br><br><p>The Lead Process Engineer will own the technical integrity and successful delivery of process engineering scope across projects at different stages (Conceptual Studies, Front-End Design (FEED), and Detailed Engineering) for oil and gas field developments, including upstream offshore/onshore, gas treating, and downstream processing, in greenfield and brownfield environments. This role leads a team of engineers within a multidisciplinary project team, ensuring compliance with industry standards and project specifications, driving technical excellence, and fostering the development of Iraqi national staff.</p><br><br><br><p><b>Job Responsibilities</b></p><br><br><ul><li>Lead the preparation and review of process simulations and optimization studies for select/appraise stage projects, and champion the development of Process Flow Schemes with heat and mass balances, equipment sizing, layout, etc., for costing and option selection.</li><li>Own the detailed process engineering deliverables across all design phases, including Process Flow Diagrams, Piping &amp; Instrumentation Diagrams, Equipment Datasheets, Study Reports/Manuals, etc., ensuring alignment with international standards and project requirements.</li><li>Oversee the review of process design work by third parties (vendors) and other offices; champion participation in HAZIDs, HAZOPs, SIL, Hazard Analysis reviews, and audits; ensure timely issue resolution and closure.</li><li>Act as the primary technical interface with clients, communicating complex concepts clearly in both written and verbal formats; manage client expectations and confirm technical commitments.</li><li>Mentor and actively develop Iraqi national staff to fulfill process engineering roles, providing structured on-the-job training, performance feedback, and growth opportunities.</li><li>Ensure adherence to office quality and safety systems; lead the implementation of quality assurance/quality control practices within the process discipline.</li><li>Collaborate with other disciplines to drive on-time, efficient, and safe project delivery; lead technical risk management and issue resolution within the process scope.</li><li>Lead the technical supervision of FEED and Detailed Engineering activities for offshore/onshore greenfield/brownfield projects, ensuring design integrity and constructability.</li><li>Support procurement activities by providing authoritative technical input for equipment selection and vendor evaluation, including evaluation of bid technical clarifications.</li><li>Participate in commissioning and start-up activities, providing seasoned technical support and facilitating smooth handover to operations.</li></ul><br><p><b>Functional Responsibilities</b></p><br><br><ul><li>Maintain and further develop process engineering standards, best practices, and technical governance within the project teams.</li><li>Lead risk assessments and develop comprehensive mitigation strategies for process-related issues; own the risk register for the process discipline.</li><li>Ensure timely delivery of all process engineering deliverables in accordance with project schedules; manage resource planning and workload distribution within the team.</li><li>Provide technical leadership in design reviews, technical compliance, and governance for all process workstreams.</li><li>Support and guide procurement activities with robust technical input for equipment specifications, vendor selection, and qualification.</li><li>Lead commissioning and start-up activities from a process perspective, delivering technical support, commissioning procedures, and start-up readiness reviews.</li></ul><br><p><b>Technical Skills</b></p><br><br><ul><li>Extensive experience in FEED and Detailed Engineering design for offshore/onshore greenfield/brownfield projects.</li><li>Proficiency in process simulation software (e.g., Aspen HYSYS, Flare System Analyzer, ProMax, Pipesim, Pipenet, others).</li><li>Strong knowledge of process safety management and hazard analysis techniques.</li><li>Familiarity with relevant industry codes and standards (e.g., API, ASME, ISO).</li><li>Experience with process control systems and instrumentation.</li></ul><br><p><b>Soft Skills</b></p><br><br><ul><li>Leadership and team management skills.</li><li>Strong communication and interpersonal skills.</li><li>Ability to work collaboratively in a multidisciplinary environment.</li><li>Problem-solving mindset with a focus on innovation and efficiency.</li><li>Adaptability to changing project requirements and priorities.</li></ul><br><p><b>Qualifications</b></p><br><br><ul><li>Mandatory:&nbsp;Bachelor’s degree in engineering (Chemical, Process, or related field).</li><li>Preferred:&nbsp;Master’s degree in engineering (Chemical, Process, or related field) and/or membership of internationally accepted applicable professional Institute.</li><li>10 years of experience in process engineering within engineering Contractors, with a focus on FEED and EPC design for upstream onshore/offshore greenfield/brownfield projects.</li></ul><br><p><b>Work Environment</b></p><br><br><p>The role will be based in Iraq, requiring collaboration with local and international teams. The work environment is dynamic and fast-paced, necessitating flexibility and a proactive approach to challenges.</p><br><br><br><br><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> We are supporting a leading international Oil &amp; Gas company in to hire an experienced <strong>Project Completion Lead Engineer.</strong><br> This is a unique opportunity to contribute to a high-impact project, working alongside global experts on one of the region’s most strategic energy developments.<br> NES has deep insight into their culture and hiring expectations - allowing us to support candidates effectively throughout the hiring process.<br> <strong>Job Description</strong><ul><li><strong>Role- Project Completion Lead Engineer.</strong></li><li><strong>Location: Al-Anbar Governate, Iraq </strong></li><li><strong>Work Pattern: Rotation– 6 weeks on 3 weeks off</strong></li><li><strong>Daily pay rate </strong></li><li><strong>Verbal and written communication in English is mandatory</strong></li></ul><strong>Why This Opportunity Stands Out</strong><ul><li>End-to-End Project Ownership</li><li>Strategic Impact on Project Success</li><li>Specialized Expertise in CCMS</li><li>Cross-Functional Leadership Exposure</li><li>Data &amp; Digital Systems Leadership</li><li>High Responsibility in Final Project Delivery</li></ul><strong>Must-Have Requirements</strong><br> 10–15 years of experience in:<ul><li>Project completions</li><li>Commissioning systems</li><li>Database management (CCMS/Maximo)</li></ul>Engineering Degree or Diploma (Mechanical / Electrical / Instrumentation / relevant discipline)<br> <br> <strong>Why Apply Through NES?</strong><br> NES is the world’s leading engineering staffing provider, operating across Oil &amp; Gas, Power, Life Sciences, and infrastructure sectors.<br> 80+ offices across 45 countries<br> 24,000+ contractors globally and 10,000+ in the Middle East<br> Strong regional presence and long-term client partnerships<br>With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil &amp; Gas, Power &amp; Renewables, Chemicals, Construction &amp; Infrastructure, Life Sciences, Mining and&nbsp;Manufacturing&nbsp;sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients. <br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Position: Principal Well Engineer <br> Department: Wells<br> Location: Basra, Iraq<br> Duration: 12 months renewable <br> Rotation: 28/28<br> <br> <strong>Role synopsis</strong>&nbsp;<br> <br> The Principal Well Engineer reports to the Well Engineering Manager (WEM). The role will be responsible for supplying well engineering and well operation support across the Wells department. Responsibilities include the development and implementation of a bespoke Wells Management System (WMS), engineering and management of integrated well engineering projects across the drilling, workover and well services functions as well as providing peer review and guidance to the wider WE community.<br> <br> The individual shall have a broad experience base across drilling, workover and well services with a main experience base in one or more of these areas. A thorough understanding of Wells organisations and management systems in complex operations will be required; similarly a strong working relationship with the wells operations teams, subsurface, HSE, base management, reservoir engineering and contractors is essential. The individual should be adaptable and demonstrate a willingness to apply themselves across various wells functions.<br> <strong>Key accountabilities</strong>&nbsp;<ul><li>Creation, review and update of documents within the Wells Management System (WMS), standards and BOD’s under the direct guidance of the WEM</li><li>Project management and engineering of integrated engineering projects across the drilling, workover and well service functions working with various teams and stakeholders across multiple teams and departments.</li><li>The identification, evaluation and application of value enhancing, innovative and new technologies and continuous improvement initiatives across the Wells teams.</li><li>Lead problem-solving sessions with delivery teams, engineering and service providers to resolve challenges and manage change.</li><li>Consolidate performance reporting across Wells, structuring input from the various functions and presenting this in a clear and meaningful way on a regular basis.</li><li>Focal point for wellheads and Xmas trees contracts. Includes preparation and evaluation of tenders. Technical design and review ensuring fit-for-purpose design. Operational oversight.</li><li>Focal point for OCTG contracts. Includes preparation and evaluation of tenders. Technical design and review ensuring fit-for-purpose design.</li><li>Develop and initiate a WMS self-verification process.</li><li>Participate in HSE &amp; NPT incident root cause analysis, investigations and reporting.</li><li>Participate in planning of well control exercises.</li><li>Arrange and facilitate contractor performance improvement meetings as and when required.</li><li>Assurance of the technical integrity of operations and compliance with in-country law, policy, international standards and guidelines.</li><li>Develop (annual) WE departmental objectives for inclusion in AOP and report on progress throughout the year.</li><li>Initiate and or contribute to engineering research projects.</li><li>Provide additional technical input and support to various wells teams when required.</li></ul><strong>Criteria and Qualifications</strong><ul><li>Possesses international experience in the oil &amp; gas industry.</li><li>Educated to Bachelor of Science (Engineering) degree level, or equivalent.</li><li>A broad engineering and operations experience across drilling, workover, well services and well integrity with a main experience base in one or more of these areas.</li><li>Team player, fluent in English language with strong communication skills is essential.</li><li>Strong leadership.</li><li>Good interpersonal skills – peer reviews/consultation</li><li>Experience in developing, maintenance and improvement of Integrated Management Systems in the wells sphere.</li><li>Experience working for an international major operator preferred.</li><li>Knowledge of tender preparation and evaluation of wells contracts.</li><li>Effective and proficient communicator, both verbal (English language) and written.</li><li>Maintains a high standard of business integrity, professional behaviour and confidentiality.</li><li>Experience in PowerBI and Sharepoint.</li><li>Experience working in a Joint Venture environment and in a remote location.</li><li>Experience in tendering &amp; contracting. Demonstratable history of being part or leading a Technical Evaluation Team for tender evaluation (Technical only).</li><li>Experience working on land operations, and in the Middle East would be considered beneficial.</li></ul><br>With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil &amp; Gas, Power &amp; Renewables, Chemicals, Construction &amp; Infrastructure, Life Sciences, Mining and&nbsp;Manufacturing&nbsp;sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients. <br><br> </div>

<p><h4>Division</h4> <p>CSSP (Ratawi Hub – Iraq)</p> <p><strong>Direction:</strong> IM</p> <p><strong>Situation in organization</strong><br> Within the Project Organization, the Lead Interface Engineer reports to the Interface Manager.</p> <p><strong>Job location(s):</strong> CPP Office (Abu Dhabi, UAE) during detailed engineering phase / site (Iraq) during construction phase.</p> <h4>Job dimensions</h4> <p>The Lead Interface Engineer shall assist the Interface Manager on the following:</p> <ul> <li>Take care of the overall management of interface and data changes between stakeholders of the Common Seawater Supply Project, and provide advice on any schedule and commercial issues arising from such interfaces and changes.</li> <li>Ensure that interface management procedures are in place and that EPC and other contractors implement the required interface management system throughout the project duration.</li> </ul> <p>The Lead Interface Engineer is anticipated to start early 2026 and will be based in Abu Dhabi (UAE).</p> <h4>Activities</h4> <p>The job holder shall assist the Interfaces Manager:</p> <ul> <li>With the support of the Project Management Consultant, define, implement and maintain the methodology/procedure to be applied and the corresponding database to be created, to ensure a clear and accurate identification and management of interfaces. This procedure will be as efficient and simple as possible and will be used throughout the life of the project and shall be applied by the different entities/contractors.</li> <li>Management of interface and change data between parties, monitor and control interface and change issues, in order to resolve interface and change issues in a timely and organised manner according to the project interface and change control procedures.</li> <li>Attend major interface meetings, internal and external with other entities of CSSP Project, contractor representatives, vendors, TotalEnergies specialists, partner’s experts, etc. Lead interface and other technical meetings as required.</li> <li>Ensure that HSE requirements are systematically considered all along the interface management process and in particular that interfaces are properly addressed during HAZID/HAZOP/PTR project audits.</li> <li>Consolidate and advise the Project Director and Technical and Project Control Managers of any risks, especially schedule and commercial issues arising from interfaces and changes. Shall be the coordinator of the Management of Change, providing the justification through all disciplines of the change. Ensure complete documentation of all changes, and communication of these in compliance with the processes agreed with BOC and regulatory authorities.</li> <li>Prepare technical papers to support management positions for clarifications or decisions with regulatory authorities of host countries, other entities or partners.</li> <li>Ensure that EPC Contractor implements required interface management system and resources and monitor throughout the project duration that EPC Contractor honours its responsibilities as defined in the project interface procedure.</li> <li>Ensure the implementation of interface changes/optimisations resulting from negotiations of the external interfaces.</li> <li>Together with Project Management Consultant, ensure design consistency and continuity throughout the facilities.</li> <li>Avoid change orders and delays caused by interface issues; ensure timely follow-up of interface issues.</li> <li>Assist the Project Management Consultant, prior to and during construction phase, by anticipating operational interfaces with other parties (clashes or conflicting program).</li> <li>In case of SIMOPS (phased delivery of the plant): propose solutions and participate in definition and resolution.</li> </ul> <h4>Context and environment</h4> <p>Basrah Oil Company (BOC) is undertaking the Seawater Treatment Facilities (STF) project to provide treated seawater to the oil fields in southern Iraq (for injection). The STF will be located on the west side of the Khor Al Zubair, upstream of the port of Umm Qasr and will have the following key components:</p> <ul> <li>Site development and non-process facilities.</li> <li>Ancillaries and buildings.</li> <li>Seawater intake and outfall structures.</li> <li>Material off-loading facility.</li> <li>Seawater clarification, filtration and deoxygenating processes.</li> <li>Chemical addition systems.</li> <li>Shipping pumps.</li> <li>Power generation.</li> <li>Utilities.</li> </ul> <p>FEED was completed (June 2016) with Phase 1 capacity of 7.5 million barrels of water per day (MMBWPD) of treated seawater, with a subsequent Phase 2 of 5 MMBWPD for a total buildout capacity of 12.5 MMBWPD. The project was placed on hold upon the completion of FEED.</p> <p>In 2018 BOC launched a call for tender on the FEED, but instructed bidders to reduce capacity to 5.0 MMBWPD, with provision for a future addition of 2.5 MMBWPD for a total build-out phase of 7.5 MMBWPD.</p> <h4>Accountabilities</h4> <p>Accountable for the interfaces and management of change (MoC), being internal (between units, disciplines, PMT, One Tech and specialists) or external (between other CSSP projects, contractors, company, etc.). The job holder coordinates all interface and MoC matters, protecting the WI Project and company’s position with regards to all external interfaces and to internal interfaces between contractors, and ensuring that changes are evaluated and executed for the overall benefit of the project.</p> <p>Accordingly, the job holder shall make the necessary coordination between all involved contractors/parties and company teams and implement an agreed interface management procedure and methodology. He/she shall ensure the proper and timely follow-up and resolution of interface issues between the various involved parties documents. He/she must support the Interface Manager to ensure full control of the Management of Change process, and shall document all the changes, taking care to perform a full review with various disciplines with project aspects to justify or reject the change.</p> <p>A key aspect of interface coordination is the ability to effectively communicate, across all involved parties, all details related to an interface, including requirements, technical specifications, and potential issues. It is important that the communication channel is promptly established, the proper information is exchanged, and all involved parties acknowledge that they fully understand the interface requirements.</p> <p>The nature of the development might call for a “staged” delivery of the facilities. Simultaneous activities between construction activities and operations activities can occur to meet the agreed schedule.</p> <h4>Qualification</h4> <ul> <li>Degree in engineering.</li> </ul> <h4>Experience</h4> <ul> <li>15 years of relevant experience in industrial projects.</li> <li>A sound multi-discipline technical background complemented by a sound knowledge on onshore surveys campaigns and civil works experience.</li> <li>Very good communication and interpersonal skills and capacity to work in a “transverse” organisation.</li> <li>Mastering English is a must, knowledge of French and Arabic is a plus.</li> </ul></p><p></p>

<p><h4>Division</h4> <p>CSSP (Ratawi Hub – Iraq)</p> <p><strong>Direction:</strong> IM</p> <p><strong>Situation in organization</strong><br> Within the Project Organization, the Lead Interface Engineer reports to the Interface Manager.</p> <p><strong>Job location(s):</strong> CPP Office (Abu Dhabi, UAE) during detailed engineering phase / site (Iraq) during construction phase.</p> <h4>Job dimensions</h4> <p>The Lead Interface Engineer shall assist the Interface Manager on the following:</p> <ul> <li>Take care of the overall management of interface and data changes between stakeholders of the Common Seawater Supply Project, and provide advice on any schedule and commercial issues arising from such interfaces and changes.</li> <li>Ensure that interface management procedures are in place and that EPC and other contractors implement the required interface management system throughout the project duration.</li> </ul> <p>The Lead Interface Engineer is anticipated to start early 2026 and will be based in Abu Dhabi (UAE).</p> <h4>Activities</h4> <p>The job holder shall assist the Interfaces Manager:</p> <ul> <li>With the support of the Project Management Consultant, define, implement and maintain the methodology/procedure to be applied and the corresponding database to be created, to ensure a clear and accurate identification and management of interfaces. This procedure will be as efficient and simple as possible and will be used throughout the life of the project and shall be applied by the different entities/contractors.</li> <li>Management of interface and change data between parties, monitor and control interface and change issues, in order to resolve interface and change issues in a timely and organised manner according to the project interface and change control procedures.</li> <li>Attend major interface meetings, internal and external with other entities of CSSP Project, contractor representatives, vendors, TotalEnergies specialists, partner’s experts, etc. Lead interface and other technical meetings as required.</li> <li>Ensure that HSE requirements are systematically considered all along the interface management process and in particular that interfaces are properly addressed during HAZID/HAZOP/PTR project audits.</li> <li>Consolidate and advise the Project Director and Technical and Project Control Managers of any risks, especially schedule and commercial issues arising from interfaces and changes. Shall be the coordinator of the Management of Change, providing the justification through all disciplines of the change. Ensure complete documentation of all changes, and communication of these in compliance with the processes agreed with BOC and regulatory authorities.</li> <li>Prepare technical papers to support management positions for clarifications or decisions with regulatory authorities of host countries, other entities or partners.</li> <li>Ensure that EPC Contractor implements required interface management system and resources and monitor throughout the project duration that EPC Contractor honours its responsibilities as defined in the project interface procedure.</li> <li>Ensure the implementation of interface changes/optimisations resulting from negotiations of the external interfaces.</li> <li>Together with Project Management Consultant, ensure design consistency and continuity throughout the facilities.</li> <li>Avoid change orders and delays caused by interface issues; ensure timely follow-up of interface issues.</li> <li>Assist the Project Management Consultant, prior to and during construction phase, by anticipating operational interfaces with other parties (clashes or conflicting program).</li> <li>In case of SIMOPS (phased delivery of the plant): propose solutions and participate in definition and resolution.</li> </ul> <h4>Context and environment</h4> <p>Basrah Oil Company (BOC) is undertaking the Seawater Treatment Facilities (STF) project to provide treated seawater to the oil fields in southern Iraq (for injection). The STF will be located on the west side of the Khor Al Zubair, upstream of the port of Umm Qasr and will have the following key components:</p> <ul> <li>Site development and non-process facilities.</li> <li>Ancillaries and buildings.</li> <li>Seawater intake and outfall structures.</li> <li>Material off-loading facility.</li> <li>Seawater clarification, filtration and deoxygenating processes.</li> <li>Chemical addition systems.</li> <li>Shipping pumps.</li> <li>Power generation.</li> <li>Utilities.</li> </ul> <p>FEED was completed (June 2016) with Phase 1 capacity of 7.5 million barrels of water per day (MMBWPD) of treated seawater, with a subsequent Phase 2 of 5 MMBWPD for a total buildout capacity of 12.5 MMBWPD. The project was placed on hold upon the completion of FEED.</p> <p>In 2018 BOC launched a call for tender on the FEED, but instructed bidders to reduce capacity to 5.0 MMBWPD, with provision for a future addition of 2.5 MMBWPD for a total build-out phase of 7.5 MMBWPD.</p> <h4>Accountabilities</h4> <p>Accountable for the interfaces and management of change (MoC), being internal (between units, disciplines, PMT, One Tech and specialists) or external (between other CSSP projects, contractors, company, etc.). The job holder coordinates all interface and MoC matters, protecting the WI Project and company’s position with regards to all external interfaces and to internal interfaces between contractors, and ensuring that changes are evaluated and executed for the overall benefit of the project.</p> <p>Accordingly, the job holder shall make the necessary coordination between all involved contractors/parties and company teams and implement an agreed interface management procedure and methodology. He/she shall ensure the proper and timely follow-up and resolution of interface issues between the various involved parties documents. He/she must support the Interface Manager to ensure full control of the Management of Change process, and shall document all the changes, taking care to perform a full review with various disciplines with project aspects to justify or reject the change.</p> <p>A key aspect of interface coordination is the ability to effectively communicate, across all involved parties, all details related to an interface, including requirements, technical specifications, and potential issues. It is important that the communication channel is promptly established, the proper information is exchanged, and all involved parties acknowledge that they fully understand the interface requirements.</p> <p>The nature of the development might call for a “staged” delivery of the facilities. Simultaneous activities between construction activities and operations activities can occur to meet the agreed schedule.</p> <h4>Qualification</h4> <ul> <li>Degree in engineering.</li> </ul> <h4>Experience</h4> <ul> <li>15 years of relevant experience in industrial projects.</li> <li>A sound multi-discipline technical background complemented by a sound knowledge on onshore surveys campaigns and civil works experience.</li> <li>Very good communication and interpersonal skills and capacity to work in a “transverse” organisation.</li> <li>Mastering English is a must, knowledge of French and Arabic is a plus.</li> </ul></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Job Title: Control System Specialist Engineer<br> Location: Basra, Iraq<br> Duration: 12 months with possible extension.<br> Renumeration: Competitive day rate + Flight + Accommodation<br> 28x28 Rotation<br> <br> Department: This role will be reporting into the Maintenance &amp; Engineering team.<br> <br> The control systems engineer shall report to Instrument &amp; Control Team Lead and will be an integral member of a multi-discipline Engineering Department.<br> &nbsp;Responsibilities shall include:<ul><li>Provide technical control and safety system engineering support to client departments in the execution of brownfield and greenfield development projects, construction, operations and maintenance groups.</li><li>Participate in conceptual, basic, and detailed design activities.</li><li>Provide assurance on engineering compliance against pertinent standards, specifications, codes and regulations. Ensure that non-conformities and deviations are identified, risk assessed and mitigated.</li><li>Provide response to engineering and site queries in line with client specifications and best engineering practices.</li><li>Provide technical input to client management of change process. Carry out site surveys. Produce design and instrument, control and safety system work pack deliverables. Contents to include scopes of work, design/construction drawings, design calculations, system architecture, network configuration, control narrative, software design specification, HMI specification, alarm configuration, system I/O allocation, MTOs, task hazard assessments.</li><li>Provide support to develop and execute strategies to upgrade and expand existing control /safety systems.&nbsp;</li><li>Review and approve third-party engineering deliverables.</li><li>Produce material requisitions, technical bid evaluations, interfacing with vendors via procurement department</li><li>Provide support to activity planning and progress reporting.</li><li>Liaise and work closely with client instrument technical authority for guidance as necessary</li><li>Attend system testing, FAT, SAT and conduct technical audit/verification</li></ul><br> <br> Qualification:<ul><li>Bachelor’s degree in Instrumentation/Control /Electronics engineering</li><li>15+ years relevant experience in control and safety system engineering, including the design and operation of processing systems in the oil and gas industry.</li><li>Functonal safety certified from TUV/Exida or similar organization.</li><li>Experience in onshore operations, emerging areas / multicultural environments. Relevant experience in successive roles includes problem analysis, solution proposal, related working procedure draft and implementation.</li><li>Experience of engineering role in detailed engineering design, procurement, construction and commissioning of PLC, DCS, ESD, FGS, RTU, SCADA, HMI and Historian.</li><li>Sound knowledge on system topology and control networks RS232/485/422, Modbus, Ethernet, TCP/IP, SafetyNet, Control Net, DH+ etc and network security.</li><li>Experience on digital/smart oil field instrumentation and network.</li><li>Hands on experience on Emerson Delta-V ICSS and Alen Bradley Control logix.</li><li>Candidate to demonstrate familiarity with all relevant industry codes, standards, and practices (IEC, IEEE, ISA, API, ISO), for instrumentation &amp; control systems.</li><li>Candidate to demonstrate good presentation and effective interdisciplinary communication skills, capability of communication with all levels, manages with different cultural background.</li></ul><br> If you would like to know more about this opportunity, please send your most updated CV to erica.balde@nesfircroft.com&nbsp;<br>With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil &amp; Gas, Power &amp; Renewables, Chemicals, Construction &amp; Infrastructure, Life Sciences, Mining and&nbsp;Manufacturing&nbsp;sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients. <br><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Support the team member of HSE team to prepare deliverable HSE documents such as HSE Plan and other relevant procedures for Project execution.</p><p>Support the HSE team leader for project Proposals in mostly overseas. Review &amp; prepares pre-qualification response to questionnaires documents from the client, ITB (Instruction to Bidder) review, and summary at the proposal stage. Prepare HSE documentation for clients/projects as per the requirements Support in providing training to HSE team member in project PQ (Project Pre-Qualification) and Project Proposal handling including Project Execution set up concerning Project HSE Management. Develop, implement and improve HSE management systems, processes and procedures to support business operations in accordance with ISO 45001 Develop HSE Alert &amp; HSE Risk Assessment for overseas project sites safety awareness Prepares weekly, quarterly, annual and other HSE related report covering the overseas project sites HSE activities. Support overseas projects with the identification of environmental aspects and determining the project objectives and target Carryout HSE training courses when required</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><h2>Knowledge And Qualifiction</h2><p>Degree holder in Engineering preferably major in Safety or Mechanical, Civil, Electrical, Industrial or Chemical</p><p>At least Ten (10) years experienced in field as an HSE engineer</p><p>At least Two (2) years experienced in PQ/ITB Document Process</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><u><b>Job Summary</b></u> <br></span><p>The HSE Engineer supports the Company HSE Manager/Project HSE Manager to implement the HSE management system. The role assists in planning, implementation, evaluation and analyzing HSE activities at site to ensure HSE target and objectives are measured and achieved.</p><br> <br><br><u><b>Job Responsibilities 1</b></u> <br><p>Assist in the implementation of and compliance to the Project Health and Safety Management Plan (PHSP)</p><br> <p>and Project HSE Management Programme.</p><br> <p>Arrange, conduct and participates in training sessions, HSE Committee and Coordination Meetings.</p><br> <p>Advise supervisory Staff with regards to accident prevention and improvement related to work methods.</p><br> <p>Assist in leading and supervising HSE officers onsite.</p><br> <p>Monitor the execution of HSE activities on a project to ensure HSE requirements are met as per the project</p><br> <p>HSE plan and HSEMS requirement.</p><br> <p>Ensure that existing hazards, unsafe work conditions and /or practices are identified on a daily basis and</p><br> <p>observation reports are raised and corrective measures are recorded.</p><br> <p>Ensure to address and report violation on daily basis and make necessary recommendations.</p><br> <p>Monitor timely reporting of project HSE performance Ensure achievement of HSE goals on project.</p><br> <p>Ensure that existing hazards, unsafe work conditions and /or practices are identified on a daily basis and</p><br> <p>observation reports are raised and corrective measures are recorded.</p><br> <p>Ensure to address and report violation on daily basis and make necessary recommendations.</p><br> <p>Monitor timely reporting of project HSE performance Ensure achievement of HSE goals on project.</p><br> <p>Support the implementation of HSE initiatives, participate in safety awareness activities, and contribute to incident reporting and resolution in alignment with company and IMS policies</p><br> <br><br><u><b>Job Responsibilities 2</b></u> <br><br><b>Additional Responsibilities 3</b> <br><br><u><b>Job Knowledge &amp; Skills</b></u> <br><p>Knowledge of all relevant safety regulations, procedures and instructions. Knowledge in Qatar and International</p><br> <p>Safety Standards. Knowledge in integrated Management System. Strong knowledge of environmental</p><br> <p>regulations, including air, wastewater, and hazardous waste. Knowledge of Chemical Material Management,</p><br> <p>including management of MSDS.Knowledge of pollution prevention and waste minimization initiatives.</p><br> <p>ERP knowledge preferably SAP functional skills are a requirement to be successful in this role.</p><br><br><br><u><b>Job Experience</b></u> <br><p>Minimum 5 year(s) working experience, 3 year(s) relevant working experience, 2 year (s) GCC is a plus</p><br><br><br><u><b>Competencies</b></u> <br>Resilience<br>AI Fluency<br>Quality<br>Leadership<br>Safety Procedures and Compliance L2<br>Safety Management L2<br>Incident Investigations L2<br>Safety Program Development L2<br>Agility<br>Accident Reduction Programs L2<br><br><br><u><b>Education</b></u> <br>Bachelor's Degree in Engineering or Level 6 Diploma in OHS<br>Diploma in NEBOSH or any Related Technical Certificates<br><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><u><b>Job Summary</b></u> <br></span><p>The Senior HSE Engineer supports the HSE Manager, Project Directors / Project Manager by assisting projects to implement the integrated management system and local legal regulations. To plan, implement, evaluate and analyze HSE activities at site to ensure HSE Target and objectives are measured and achieved.</p><br> <br><br><u><b>Job Responsibilities 1</b></u> <br><p>Develop, implement, and maintain HSE management systems, policies, and procedures in accordance with regulatory requirements and industry standards.</p><br> <p>Conduct risk assessments and audits to identify hazards, evaluate risks, and recommend control measures to mitigate potential incidents.</p><br> <p>Provide technical guidance and support to project teams, contractors, and stakeholders on HSE matters, ensuring compliance with safety regulations and best practices.</p><br> <p>Lead incident investigations, root cause analyses, and corrective action planning to prevent recurrence and improve HSE performance.</p><br> <p>Develop and deliver HSE training programs to educate employees on safe work practices, emergency procedures, and environmental responsibilities.</p><br> <p>Monitor and evaluate HSE performance indicators, track trends, and analyze data to measure progress and identify areas for improvement.</p><br> <p>Liaise with regulatory agencies, clients, and external stakeholders on HSE matters, ensuring compliance with legal and contractual requirements.</p><br> <p>Prepare HSE reports, presentations, and documentation for internal and external stakeholders, communicating key findings and recommendations.</p><br> <p>Drive continuous improvement in HSE performance through the implementation of best practices, lessons learned, and feedback mechanisms.</p><br> <p>Provide leadership and mentorship to junior HSE staff, fostering a culture of safety and environmental stewardship within the organization.</p><br> <p>Support the implementation of HSE initiatives, participate in safety awareness activities, and contribute to incident reporting and resolution in alignment with company and IMS policies</p><br> <br><br><u><b>Job Responsibilities 2</b></u> <br><br><b>Additional Responsibilities 3</b> <br><br><u><b>Job Knowledge &amp; Skills</b></u> <br><p>Knowledge of all relevant safety regulations, procedures and instructions. Knowledge in Qatar and</p><br> <p>International Safety Standards. Knowledge in integrated management system. Knowledge of current and</p><br> <p>proposed applicable environmental regulations. High level of working knowledge and experience with regulatory</p><br> <p>requirements. Certified Fire Safety/ Engineering from a recognized institution. Audit Qualifications SO 45001</p><br> <p>OHSMS and EMS 14001.Accident Investigation Certification, Scaffolding Training, Fire Safety Training and</p><br> <p>Rigging Training.</p><br> <p>ERP knowledge preferably SAP functional skills are a requirement to be successful in this role.</p><br><br><br><u><b>Job Experience</b></u> <br><p>Minimum 8 year(s) working experience, 5 year(s) relevant working experience, 2 year (s) GCC is a plus</p><br><br><br><u><b>Competencies</b></u> <br>Resilience<br>Agility<br>AI Fluency<br>Quality<br>Leadership<br>Safety Management L3<br>Safety Program Development L3<br>Incident Investigations L3<br>Safety Procedures and Compliance L3<br>Accident Reduction Programs L3<br><br><br><u><b>Education</b></u> <br>Diploma in NEBOSH or Level 6 Diploma in OHS<br>Bachelor's Degree in Engineering or any related field<br><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>E&amp;I Engineer<br><br>E&amp;I EngineerECSS30 - Sr. Specialist, Commissioning<br><p>KBR Sustainable Technology Solutions (STS) provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design capabilities, and smart solutions to optimize planned and operating assets.</p><br><br><br><p>Responsible for start-up and plant operations activities including equipment and system checkout, inspection for proper installation, review for correct design, and calculation of expected system and equipment operating parameters under temporary start-up conditions. Coordinates start-up operations, including the direction of craft, and all other start-up activities such as flushing, chemical cleaning, and initial equipment and system operation. Coordinates performance tests and calculates test results and heat balances. Performs calculations required to properly evaluate design changes, provides engineering reports for the engineering department to assist in design change preparation. Works with client at the site. Under general supervision, performs all conventional aspects of the functional area subject matter. Devises new approaches to problems encountered. Plans, schedules, and conducts work requiring judgment in the independent evaluation, selection, and adaptation of engineering techniques, procedures, and criteria. Performs work which involves conventional engineering practice but may include a variety of complex features such as conflicting design requirements, unsuitability of conventional materials, and difficult coordination requirements. Provides technical guidance to designers and less experienced engineers. Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations. Skills are typically acquired through an undergraduate degree in Engineering and a minimum of 10 years related experience, with average experience ranging from 10-15 years.</p><br><br><br><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Senior CWI Engineer<br><br>Position Details<ul><li>Position Title: CWI Senior Engineer</li><li>Department: Wells</li><li>Location: Majnoon Oil Field – Basra, Iraq</li><li>Reports to: CWI Engineering Team Lead</li><li>Direct Reports: None</li></ul>1. Role Purpose<p>Provide engineering expertise in the planning, design, and execution support of completions, workover, well intervention and well integrity operations. Ensure high-quality engineering input, technical assurance, well integrity compliance, and continuous performance improvement across CWI operations.</p><br><br>2. Key ResponsibilitiesHSSE &amp; Well Integrity<ul><li>Champion a proactive safety culture with Zero Harm.</li><li>Conduct site safety visits, audits, and toolbox talk reviews.</li><li>Ensure compliance with well integrity standards such as NORSOK D‑010</li><li>Ensure engineering designs comply with HSSE policies, Life-Saving Rules, and well integrity guidelines.</li><li>Participate in risk assessments, HAZID, HAZOP, and technical assurance reviews.</li><li>Support incident investigations by providing technical analysis and recommendations.</li></ul>Program Development &amp; Technical Assurance<ul><li>Prepare and review Completion Programs, Workover Programs, and Intervention Procedures.</li><li>Develop well schematics, tool string designs, barrier philosophies, and risk assessments.</li><li>Ensure engineering designs comply with well integrity standards and operational requirements.</li><li>Perform technical evaluations for new technologies, equipment, and intervention methods.</li></ul>Operational Support &amp; Problem Solving<ul><li>Provide real-time engineering support to wellsite supervisors during operations.</li><li>Analyze operational challenges and propose technical solutions.</li><li>Perform pre-job and post-job reviews to ensure procedural compliance.</li><li>Support SIMOPS planning and coordination with Production, Subsurface, and Drilling teams.</li></ul>Cost &amp; Schedule Control<ul><li>Support development of budgets, forecasts, and AFE inputs.</li><li>Monitor job efficiency, performance, and operational KPIs.</li><li>Identify cost‑saving opportunities without compromising safety or quality.</li></ul>Contractor &amp; Performance Management<ul><li>Lead technical interface with service companies and contractors.</li><li>Evaluate technical proposals, equipment specifications, and new technologies.</li><li>Support tendering, technical evaluations, scopes of work, and contract management.</li><li>Monitor service quality and ensure alignment with engineering requirements.</li></ul>Reporting &amp; Governance<ul><li>Review technical proposals from service companies and ensure alignment with operational requirements.</li><li>Participate in contractor performance reviews and technical evaluations.</li><li>Ensure QA/QC compliance for equipment and tools used in rigless operations.</li></ul>3. Qualifications &amp; Experience<ul><li>Bachelor’s degree in Petroleum, Mechanical, or related Engineering discipline.</li><li>8-12+ years of experience in completions, well intervention, workover, and well integrity engineering disciplines.</li><li>Valid IWCF Level 4 Well Intervention Pressure Control certification.</li><li>Strong experience leading CWI engineering teams in high‑activity onshore fields.</li><li>Comprehensive understanding of well integrity standards (e.g., NORSOK D‑010), well control, and barrier management.</li><li>Strong knowledge of international standards (API, ISO, IOGP) and regulatory compliance requirements.</li><li>Expertise in completion, CT, slickline, e-line, ESP, stimulation, and workover engineering.</li><li>Experience in Iraq/Majnoon preferred.</li><li>Fluency in English; Arabic is an advantage.</li></ul>4. Core Competencies<ul><li>CWI Technical Mastery</li><li>Well Integrity &amp; Risk Management</li><li>Engineering &amp; HSSE Leadership</li><li>Performance Management &amp; Continuous Improvement</li><li>Cross‑Functional Collaboration</li><li>Contractor &amp; Stakeholder Management</li><li>Communication &amp; Technical Reporting</li></ul><br><p>Approved By: Steven Hendry</p><br><br><br><p>Position: Wells Manager</p><br><br><br><p>Date: 03 Mar 2026</p><br><br><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><u><b>Job Summary</b></u> <br></span><p>The Planning Engineer implements and monitors engineering design stages planning processes, reviews and monitors consultant design plans and authorities approval to ensure that there is no clash between construction and design plans, efficient delivery of the design engineering to maintain construction plans progress without delay. Monitors procurement process to ensure of material deliverable on site as per construction plans. Coordinates between constructions need and consultants to deliver all required for construction on time</p><br> <br><br><u><b>Job Responsibilities 1</b></u> <br><p>Provide project planning/scheduling support and manage small team of planners.</p><br> <p>Manage the project schedules in accordance with the project work breakdown structure and ensuring the project that project schedules are developed.</p><br> <p>Ensure that project plans are regularly updated and within levels certainty to allow effective monitoring forecasting and control.</p><br> <p>Produce pre-design, design, tender and award, procurement, construction, and completion scheduling in order to depict the project and contractual requirements in compliance to the planning procedures.</p><br> <p>Analyze project requirements, preparation of resource and cost loaded planning schedules</p><br> <p>Produce resource histograms for manpower, material and submittals.</p><br> <p>Evaluate and analyze the progress through updated status reports in various formats based on the contract schedule in order to provide performance assessment and accurate forecasts.</p><br> <p>Coordinate and liaise with project managers to update the detailed works program</p><br> <p>Coordinate and liaise with subcontractors and authorities in relation to planning and programming matters for the various interfaces that exist on the project</p><br> <p>Liaise with the Project Director/Manager on the different scenarios to be simulated in the schedule Prepare “What if Analysis</p><br> <p>Review and evaluate the subcontractor’s schedules and reports and recommend necessary actions in order to align the subcontracted items in schedule to the contract schedule.</p><br> <p>Prepare the progress monitoring portion of the monthly report including the monthly schedule updates in order to incorporate in the monthly progress report submittal to the client and the management</p><br> <p>Participate in the progress and coordination meetings in order to discuss the status of the project.</p><br> <p>Support the implementation of HSE initiatives, participate in safety awareness activities, and contribute to incident reporting and resolution in alignment with company and IMS policies</p><br> <br><br><u><b>Job Responsibilities 2</b></u> <br><br><b>Additional Responsibilities 3</b> <br><br><u><b>Job Knowledge &amp; Skills</b></u> <br><p>Knowledge in Engineering fundamentals </p><br> <p>Knowledge in Principles of planning and knowledge in Principles and practices of research and date collection.</p><br> <p>Familiarity with planning practices and the associated software such as Advance Primavera 6 </p><br> <p>Knowledge in Principles and practices of research and data collection </p><br> <p>Familiar with local and international standards in construction</p><br> <p>ERP knowledge preferably SAP functional skills are a requirement to be successful in this role.</p><br><br><br><u><b>Job Experience</b></u> <br><p>Minimum 8 year(s) working experience, 5 year(s) relevant working experience, 2 year (s) GCC is a plus</p><br><br><br><u><b>Competencies</b></u> <br>Resilience<br>AI Fluency<br>Quality<br>Leadership<br>Cash Flow Analysis L3<br>Project Resource Management L3<br>Project Tracking and Reporting L3<br>Revenue Forecasting L3<br>Agility<br>Primavera Project Planner L3<br><br><br><u><b>Education</b></u> <br>Bachelor's Degree in Engineering or any related field<br><br><br><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Role Summary We are seeking a versatile and highly organized Operations &amp; Performance Admin Engineer to join the talabat mart (tMart) team. This hybrid role bridges technical facilities management with data-driven operational performance administration. On the engineering side, you will oversee the maintenance, procurement support, and supplier supervision for dark store facilities, ensuring critical infrastructure like cold chain systems (chillers/freezers) and electrical networks remain fully operational. On the administration side, you will dedicate focus to monitoring, tracking, and reporting the operational health of the dark stores, reviewing ground-level efficiency metrics, and delivering structured compliance dashboards to ensure seamless 30-minute delivery execution. What s On Your Plate? Engineering &amp; Facilities Management: Infrastructure Maintenance: Proactively identify, diagnose, and manage the maintenance and repair needs of essential store infrastructure, including industrial chillers, freezers, HVAC/AC systems, electrical distribution networks, and general facilities. Procurement Documentation: Formulate highly accurate and detailed Scope of Work (SOW) documents and Bill of Quantities (BOQ) for new equipment purchases, facility upgrades, and engineering services. Supplier Supervision: Supervise on-site third-party contractors and service providers during engineering installations, routine maintenance, and emergency repairs, enforcing strict quality and safety standards. Handover &amp; Receiving: Conduct technical inspections and serve as the final authority for the formal receiving and handover of newly executed engineering projects, facilities, or physical assets. Performance Administration: Real-Time Order Flow Monitoring: Maintain a regular order-flow monitoring schedule on the Shopper platform, and actively inform the relevant store team via communication groups in case of any delays in assigning or preparing orders. Nightly Sales Tracking: Create and publish structured sales update tables every night at 7:00 PM, 9:00 PM, 11:00 PM, and 12:15 AM to keep the team informed on performance milestones. Picker Performance Analytics: Check picker performance at the granular order level, calculate efficiency averages, and prepare comprehensive reports to help team leaders optimize speed and accuracy. Customer Feedback Administration: Follow up with the account advisor to aggregate, categorize, and report back on direct customer feedback to identify service delivery bottlenecks. Operational Sheet Management: Maintain and systematically update the central operations Google Sheet for all immediate store-level updates, operational tracking parameters, and system notifications. In-App Quality Control Audits: Perform weekly systematic audits of images on the talabat App, flagging discrepancies, and proactively uploading missing visual assets to guarantee catalog completeness. Barcode Error Tracking: Identify and log non-working barcodes using the specialized operations tracking sheet to minimize order picking delays. Store Invoice &amp; Compliance Audits: Monitor, track, and verify the physical and digital invoices uploaded directly by the store branches to ensure operational data integrity.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"><b>Education &amp; Experience:</b></p><p>Bachelor's degree in Mechanical, Electrical, or Industrial Engineering, or a highly related technical field, combined with at least 3+ years of experience across data tracking, performance reporting, facilities engineering, or administrative operations.</p><b>Technical Facility Skills:</b><p>Strong hands-on or supervisory experience identifying maintenance needs for commercial refrigeration (chillers/freezers), HVAC networks, and electrical systems. Proven ability to draft professional SOW and BOQ documents.</p><b>Analytical &amp; Tooling Proficiency:</b><p>Highly data-oriented and structured, with an advanced proficiency in Google Sheets/Excel. Comfortable managing high-volume operational dashboards and catching subtle metric anomalies.</p><b>Execution &amp; Communication:</b><p>Strong communication and reporting skills to seamlessly present daily facilities statuses and weekly performance summaries directly to Operations Management.</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Control Field Service Engineer </b></p><br><p><b>Are you looking for the next step in your career?</b> <b>Do you have a passion for delivering new technology and problem solving to our customers in the field?</b><br>&nbsp;</p><br><p><b>Be part of our Team</b><br>&nbsp;Our Industrial and Energy Technology (IET) operates across 120 countries and serves the entire energy value-chain and industrial sector. We hold an extensive portfolio of rotating equipment, process flow, transmission technology and lifecycle services. Our Engineering Transformation team work to improve the quality of our Engineering processes.<br>&nbsp;</p><br><p><b>Partner with the best</b></p><br><p>As a Field Service Engineer (FSE) you will represent BH both technically and professionally to ensure the equipment to be installed, maintained and started-up properly. Your key responsibilities will include:</p><br><ul><li>Provide on-site technical direction on control systems installation, including loop checks, system tests during start-up, commissioning, troubleshooting and maintenance on customer owned sites in remote oilfield, power generation and industrial facilities (Power generation includes customer owned utilities, marine drives, petrochemical, paper, steel, automotive and transportation industries)</li><li>Supervise the positioning and wiring of control panels such as Unit Control Panel (UCP), auxiliary panels of any type, Direct Current Panel (DCP), battery charger and battery cells, Generator Control &amp; Protection Panel (GCPP), Motor Control Center (MCC), etc., particularly electrical hook up, pneumatic hook up, primary hook up and field wiring done by client or sub-contractor</li><li>Check the functionality of the control sequencing for all auxiliary systems, relevant to the turbine and driven equipment such as lube oil system, hydraulic oil system, oil coolers, starting means (motor &amp; torque converter/gas expander/hydraulic starter &amp; pumps etc.), enclosure and building ventilation systems, Fire &amp; Gas detection system, compressor seal oil system, compressor dry gas seal system, process gas coolers, fuel and process gas valves, anti-surge system, etc.</li><li>Leading Installation, Maintenance, Commissioning Site Activities with proper Customer/Company Schedule Targets Mindset following strictly Quality and HSE Rules</li><li>Establish through the immediate Report after the Daily HSE Toolbox Talking the critical activity tasks and remark any HSE aspect to be followed</li><li>Utilizing Problem Solving Skills, Engineering Instructions, Drawings, and Process Instructions during <b><u>Turbomachinery’s</u></b> Commissioning and Start-up Activities - Possessing the Technical Capability to troubleshoot and provide routine maintenance checkout for <b><u>Gas Turbines</u></b> Products</li><li>Preparation of job-planning documents based to Assignment’s Scope of Work (Installation, Upgrade, Outage)</li><li>Provide leadership and technical direction to skilled labor, performing work at customer sites, maintaining strong safety mindset to assure the executed work reflects the technical requirements within Baker Hughes and customer safety standards</li><li>Providing input for Daily Outage and Weekly Installation Reports</li><li>Communicate effectively with Service/Installation/Project Managers and Site Manager about job planning, job execution, job progression as well as personnel site arrivals and departures</li><li>Prepare timely and accurate technical reports for customer records and a reference for future field service interventions.</li><li>Actively participate to customer and/or contractor meeting.</li><li>Apply all Quality procedures and documentation applicable to specific activities, ensuring they are properly followed and updated</li><li>Ensure that Site Quality Check List/Job Cards/Field Procedure are applied, and relevant documentation is properly signed.</li><li>Ensure reports and drawings “marked-up” are completed.</li><li>Ensure all Non-Conformity (technical and materials) are properly addressed using Baker Hughes e-tools and follow up till resolution.</li><li>Ensure compliance with local/current legislation, requests &amp; requirements present in the site Safety Manual</li></ul><p><b>Fuel your passion</b><br>&nbsp;To be successful in this role you will:</p><br><ul><li>Have Engineering Degree with minimum 10 years of relevant field experience in Oil &amp; Gas or Energy Sector.</li><li>Have strong knowledge on rotating equipment installation/ commissioning /maintenance / Troubleshooting. Hands on expertise on of HDGT (Frame 5/2, 6B, 7E &amp; 9E) field Instrumentation, Control logic and their auxiliaries.</li><li>High expertise and Hands-On Knowledge of Mark Vie turbine control panels.</li><li>Knowledge of PLC control panels</li><li>Experience on DLN (Dry Low NOx) systems mapping.</li><li>Be able to speak fluent English language (Speaking and writing. Crucial for Report, Customer interaction and communication with ENG HQ technical alignment)</li><li>Have strong customer service-orientation, and the ability to communicate effectively with a range of stakeholders.</li><li>Proven ability to work efficiently without direct supervision.</li><li>Proven analytical and quality improvement ability.</li><li>Strong interpersonal and leadership skills</li><li>Health, Safety and Environmental mindset and compliance.</li><li>This role requires extensive travel. Applicants must be willing and able to travel significantly (not less than 70%) without geographical restriction including offshore</li></ul><p><b>Working with us</b><br>Our people are at the heart of what we do at Baker Hughes. We know we are better when all of our people are developed, engaged and able to bring their whole authentic selves to work. We invest in the health and well-being of our workforce, train and reward talent and develop leaders at all levels to bring out the best in each other.<br>&nbsp;</p><br><p><b>Working for you</b><br>&nbsp;Our inventions have revolutionized energy for over a century. But to keep going forward tomorrow, we know we have to push the boundaries today. We prioritize rewarding those who embrace change with a package that reflects how much we value their input.</p><br>The Baker Hughes internal title for this role is: Field Specialist IV - SVS - CTRL </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br>About the opportunity<br><p><strong>Role Summary</strong></p><br><br><p>We are seeking a versatile and highly organized Operations &amp; Performance Admin Engineer to join the talabat mart (tMart) team. This hybrid role bridges technical facilities management with data-driven operational performance administration. On the engineering side, you will oversee the maintenance, procurement support, and supplier supervision for dark store facilities, ensuring critical infrastructure like cold chain systems (chillers/freezers) and electrical networks remain fully operational. On the administration side, you will dedicate focus to monitoring, tracking, and reporting the operational health of the dark stores, reviewing ground-level efficiency metrics, and delivering structured compliance dashboards to ensure seamless 30-minute delivery execution.</p><br><br><p><strong>What’s On Your Plate?</strong></p><br><br><p><strong>Engineering &amp; Facilities Management:</strong></p><br><br><ul><li><p>Infrastructure Maintenance: Proactively identify, diagnose, and manage the maintenance and repair needs of essential store infrastructure, including industrial chillers, freezers, HVAC/AC systems, electrical distribution networks, and general facilities.</p><br><br></li><li><p>Procurement Documentation: Formulate highly accurate and detailed Scope of Work (SOW) documents and Bill of Quantities (BOQ) for new equipment purchases, facility upgrades, and engineering services.</p><br><br></li><li><p>Supplier Supervision: Supervise on-site third-party contractors and service providers during engineering installations, routine maintenance, and emergency repairs, enforcing strict quality and safety standards.</p><br><br></li><li><p>Handover &amp; Receiving: Conduct technical inspections and serve as the final authority for the formal receiving and handover of newly executed engineering projects, facilities, or physical assets.</p><br><br></li></ul><p><strong>Performance Administration:</strong></p><br><br><ul><li><p>Real-Time Order Flow Monitoring: Maintain a regular order-flow monitoring schedule on the Shopper platform, and actively inform the relevant store team via communication groups in case of any delays in assigning or preparing orders.</p><br><br></li><li><p>Nightly Sales Tracking: Create and publish structured sales update tables every night at 7:00 PM, 9:00 PM, 11:00 PM, and 12:15 AM to keep the team informed on performance milestones.</p><br><br></li><li><p>Picker Performance Analytics: Check picker performance at the granular order level, calculate efficiency averages, and prepare comprehensive reports to help team leaders optimize speed and accuracy.</p><br><br></li><li><p>Customer Feedback Administration: Follow up with the account advisor to aggregate, categorize, and report back on direct customer feedback to identify service delivery bottlenecks.</p><br><br></li><li><p>Operational Sheet Management: Maintain and systematically update the central operations Google Sheet for all immediate store-level updates, operational tracking parameters, and system notifications.</p><br><br></li><li><p>In-App Quality Control Audits: Perform weekly systematic audits of images on the talabat App, flagging discrepancies, and proactively uploading missing visual assets to guarantee catalog completeness.</p><br><br></li><li><p>Barcode Error Tracking: Identify and log non-working barcodes using the specialized operations tracking sheet to minimize order picking delays.</p><br><br></li><li><p>Store Invoice &amp; Compliance Audits: Monitor, track, and verify the physical and digital invoices uploaded directly by the store branches to ensure operational data integrity.</p><br><br></li></ul><br>What you need to be successful<br><ul><li><p>Education &amp; Experience: Bachelor’s degree in Mechanical, Electrical, or Industrial Engineering, or a highly related technical field, combined with at least 3+ years of experience across data tracking, performance reporting, facilities engineering, or administrative operations.</p><br><br></li><li><p>Technical Facility Skills: Strong hands-on or supervisory experience identifying maintenance needs for commercial refrigeration (chillers/freezers), HVAC networks, and electrical systems. Proven ability to draft professional SOW and BOQ documents.</p><br><br></li><li><p>Analytical &amp; Tooling Proficiency: Highly data-oriented and structured, with an advanced proficiency in Google Sheets/Excel. Comfortable managing high-volume operational dashboards and catching subtle metric anomalies.</p><br><br></li><li><p>Execution &amp; Communication: Strong communication and reporting skills to seamlessly present daily facilities statuses and weekly performance summaries directly to Operations Management.</p><br><br></li></ul><br>Who we are<br><p>Since launching in Kuwait in 2004, talabat, the leading on-demand food and Q-commerce app for everyday deliveries, has been offering convenience and reliability to its customers. talabat’s local roots run deep, offering a real understanding of the needs of the communities we serve in eight countries across the region.<br> <br> We harness innovative technology and knowledge to simplify everyday life for our customers, optimize operations for our restaurants and local shops, and provide our riders with reliable earning opportunities daily.<br> <br> At talabat, we foster an innovative environment where our talabaty employees can strive to create a positive impact across the region through the use of our platform.</p><br><br> <br><br> </div>