وظائف ممرضات - البصره العراق

<ul><li><p>Support implementation of the HSE Management System across projects and operations.</p></li><li><p>Develop and update HSE procedures, plans, and safety documentation.</p></li><li><p>Review PTW, JRA, Method Statements, and contractor safety documents.</p></li><li><p>Support safe site operations through inspections, audits, toolbox talks, and safety coaching.</p></li><li><p>Ensure compliance with permit conditions and site safety requirements.</p></li><li><p>Assist with E-Permit implementation and SIMOPS coordination.</p></li><li><p>Support occupational health, hazardous substances, lifting, and construction safety controls.</p></li><li><p>Participate in incident investigations and corrective action tracking.</p></li><li><p>Deliver HSE training, awareness sessions, and safety communications.</p></li><li><p>Monitor HSE performance, report KPIs, and promote continuous improvement and safety culture.&nbsp;</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Degree in Safety, Mechanical, Process Engineering, or equivalent relevant experience.</p></li><li><p>5–10 years of HSE experience in the oil and gas industry, including construction, production, or drilling operations.</p></li><li><p>Strong understanding of HSE legislation, standards, and company procedures.</p></li><li><p>Experience with SIMOPS and/or leading site teams is an advantage.</p></li><li><p>Trained in accident and incident investigation.</p></li><li><p>Strong communication, teamwork, and stakeholder management skills in multicultural environments.</p></li><li><p>Proactive, organised, and able to prioritise tasks effectively.</p></li><li><p>Valid and current medical certification.</p></li><li><p>Fluent in English and Arabic (written and spoken).</p></li></ul>

<p><h4>Petroleum engineer (reservoir)</h4> <p>Under direct supervision, this position is responsible for all phases of planning and execution on a small project or may be responsible for a segment of a larger project.</p> <p>Plans, organizes, coordinates, and controls small engineering projects in accordance with the established policies, procedures, systems, and requirements approved by the company.</p> <p>Contributes toward the day to day contact and communication with the client and focuses on providing client satisfaction.</p> <p>Possesses knowledge of the respective industry.</p> <p>Skills are typically acquired through completion of an undergraduate degree in engineering or project management and a minimum of 2 years related experience, with typical experience ranging from 3-7 years.</p></p><p></p>

<p><h4>Job description</h4> <p><strong>Function:</strong> Information Management / IT<br> <strong>Role level:</strong> Technical Team Lead<br> <strong>Location:</strong> Majnoon Project – Site Basra<br> <strong>Primary purpose:</strong> Lead systems support, stability, security, upgrades, troubleshooting and documentation<br> <strong>Reporting:</strong> Data Centre Manager</p> <h4>Preface</h4> <p>This job description outlines the purpose, responsibilities, competencies, experience, certifications, technical skills, and language requirements for the System Team Lead role. The role is designed for a technically experienced leader who can guide system administrators and engineers while maintaining reliable, secure, and efficient IT services.</p> <h4>Professional summary</h4> <p>The System Team Lead leads and mentors system administrators and engineers, ensuring that IT systems remain stable, secure, efficient, and aligned with operational requirements. The role oversees system upgrades, troubleshooting, technical support, documentation, and best-practice adoption. It requires strong hands-on technical capability combined with leadership, planning, communication, and stakeholder coordination skills.</p> <h4>Core competencies</h4> <ul> <li>Team leadership, mentoring, coaching, and development of system administrators and engineers.</li> <li>Strong technical problem-solving and ability to manage complex troubleshooting activities.</li> <li>Operational discipline focused on stability, security, availability, and efficiency of IT systems.</li> <li>Ability to plan, coordinate, and oversee system upgrades, patching, and continuous improvement activities.</li> <li>Strong documentation discipline, including procedures, standards, runbooks, and knowledge sharing.</li> <li>Clear communication with technical teams, business users, vendors, and management stakeholders.</li> <li>Ability to prioritize technical work across incidents, maintenance, projects, and operational support.</li> </ul> <h4>Professional experience</h4> <ul> <li>Extensive experience in systems administration, infrastructure support, or IT engineering roles.</li> <li>Experience leading or mentoring system administrators, engineers, or technical support resources.</li> <li>Proven experience supporting enterprise IT systems in operational or project-based environments.</li> <li>Experience overseeing system upgrades, troubleshooting, incident resolution, and root-cause analysis.</li> <li>Experience developing best practices, technical documentation, procedures, and operational standards.</li> <li>Experience working with internal IT teams, vendors, and wider project stakeholders to maintain service continuity.</li> </ul> <h4>Key responsibilities</h4> <ul> <li><strong>Lead and mentor:</strong> Lead, guide, and mentor system administrators and engineers, supporting team capability, work allocation, and technical discipline.</li> <li><strong>Maintain stability:</strong> Ensure IT systems remain stable, secure, efficient, and available to support business and project operations.</li> <li><strong>Oversee upgrades:</strong> Coordinate system upgrades, patching, maintenance activities, and technical changes in line with operational needs.</li> <li><strong>Troubleshoot issues:</strong> Oversee complex troubleshooting, escalation management, root-cause analysis, and incident resolution.</li> <li><strong>Drive best practice:</strong> Develop, maintain, and promote best practices, technical standards, runbooks, and operational documentation.</li> <li><strong>Support governance:</strong> Contribute to IT governance, reporting, risk reduction, service improvement, and stakeholder communication.</li> </ul> <h4>Certifications</h4> <p>Relevant professional certifications are preferred where aligned to the organisation, technology stack, and project requirements. Examples include:</p> <ul> <li>Microsoft, Linux, VMware, Cisco, cloud, cyber security, or infrastructure-related certifications.</li> <li>ITIL Foundation or equivalent service management certification.</li> <li>Security-related certification such as CompTIA Security+, Microsoft Security, or equivalent is advantageous.</li> </ul> <h4>Technical skills</h4> <ul> <li><strong>Systems administration:</strong> Windows Server, Linux, core infrastructure services, patching, backup, monitoring, and support.</li> <li><strong>Infrastructure operations:</strong> Virtualization, storage, compute, network services, hosting environments, and operational resilience.</li> <li><strong>Security and controls:</strong> Secure configuration, access control, vulnerability remediation, endpoint protection, and compliance support.</li> <li><strong>Troubleshooting:</strong> Incident response, escalation support, root-cause analysis, performance investigation, and service restoration.</li> <li><strong>Upgrades and maintenance:</strong> System upgrades, patch cycles, lifecycle planning, maintenance windows, and technical change coordination.</li> <li><strong>Documentation:</strong> Runbooks, SOPs, standards, technical guides, change records, and knowledge-base material.</li> </ul> <h4>Languages</h4> <p>English language proficiency required for technical documentation, reporting, stakeholder communication, and operational coordination.<br> Arabic language skills are also relevant.</p></p><p></p>

<p><h4>Job description</h4> <p><strong>Function:</strong> Information Management / IT<br> <strong>Role level:</strong> Technical Team Lead<br> <strong>Location:</strong> Majnoon Project – Site Basra<br> <strong>Primary purpose:</strong> Lead systems support, stability, security, upgrades, troubleshooting and documentation<br> <strong>Reporting:</strong> Data Centre Manager</p> <h4>Preface</h4> <p>This job description outlines the purpose, responsibilities, competencies, experience, certifications, technical skills, and language requirements for the System Team Lead role. The role is designed for a technically experienced leader who can guide system administrators and engineers while maintaining reliable, secure, and efficient IT services.</p> <h4>Professional summary</h4> <p>The System Team Lead leads and mentors system administrators and engineers, ensuring that IT systems remain stable, secure, efficient, and aligned with operational requirements. The role oversees system upgrades, troubleshooting, technical support, documentation, and best-practice adoption. It requires strong hands-on technical capability combined with leadership, planning, communication, and stakeholder coordination skills.</p> <h4>Core competencies</h4> <ul> <li>Team leadership, mentoring, coaching, and development of system administrators and engineers.</li> <li>Strong technical problem-solving and ability to manage complex troubleshooting activities.</li> <li>Operational discipline focused on stability, security, availability, and efficiency of IT systems.</li> <li>Ability to plan, coordinate, and oversee system upgrades, patching, and continuous improvement activities.</li> <li>Strong documentation discipline, including procedures, standards, runbooks, and knowledge sharing.</li> <li>Clear communication with technical teams, business users, vendors, and management stakeholders.</li> <li>Ability to prioritize technical work across incidents, maintenance, projects, and operational support.</li> </ul> <h4>Professional experience</h4> <ul> <li>Extensive experience in systems administration, infrastructure support, or IT engineering roles.</li> <li>Experience leading or mentoring system administrators, engineers, or technical support resources.</li> <li>Proven experience supporting enterprise IT systems in operational or project-based environments.</li> <li>Experience overseeing system upgrades, troubleshooting, incident resolution, and root-cause analysis.</li> <li>Experience developing best practices, technical documentation, procedures, and operational standards.</li> <li>Experience working with internal IT teams, vendors, and wider project stakeholders to maintain service continuity.</li> </ul> <h4>Key responsibilities</h4> <ul> <li><strong>Lead and mentor:</strong> Lead, guide, and mentor system administrators and engineers, supporting team capability, work allocation, and technical discipline.</li> <li><strong>Maintain stability:</strong> Ensure IT systems remain stable, secure, efficient, and available to support business and project operations.</li> <li><strong>Oversee upgrades:</strong> Coordinate system upgrades, patching, maintenance activities, and technical changes in line with operational needs.</li> <li><strong>Troubleshoot issues:</strong> Oversee complex troubleshooting, escalation management, root-cause analysis, and incident resolution.</li> <li><strong>Drive best practice:</strong> Develop, maintain, and promote best practices, technical standards, runbooks, and operational documentation.</li> <li><strong>Support governance:</strong> Contribute to IT governance, reporting, risk reduction, service improvement, and stakeholder communication.</li> </ul> <h4>Certifications</h4> <p>Relevant professional certifications are preferred where aligned to the organisation, technology stack, and project requirements. Examples include:</p> <ul> <li>Microsoft, Linux, VMware, Cisco, cloud, cyber security, or infrastructure-related certifications.</li> <li>ITIL Foundation or equivalent service management certification.</li> <li>Security-related certification such as CompTIA Security+, Microsoft Security, or equivalent is advantageous.</li> </ul> <h4>Technical skills</h4> <ul> <li><strong>Systems administration:</strong> Windows Server, Linux, core infrastructure services, patching, backup, monitoring, and support.</li> <li><strong>Infrastructure operations:</strong> Virtualization, storage, compute, network services, hosting environments, and operational resilience.</li> <li><strong>Security and controls:</strong> Secure configuration, access control, vulnerability remediation, endpoint protection, and compliance support.</li> <li><strong>Troubleshooting:</strong> Incident response, escalation support, root-cause analysis, performance investigation, and service restoration.</li> <li><strong>Upgrades and maintenance:</strong> System upgrades, patch cycles, lifecycle planning, maintenance windows, and technical change coordination.</li> <li><strong>Documentation:</strong> Runbooks, SOPs, standards, technical guides, change records, and knowledge-base material.</li> </ul> <h4>Languages</h4> <p>English language proficiency required for technical documentation, reporting, stakeholder communication, and operational coordination.<br> Arabic language skills are also relevant.</p></p><p></p>

<p><h4>Instrument & Controls Lead Engineer</h4> <p>KBR Sustainable Technology Solutions (STS) provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design capabilities, and smart solutions to optimize planned and operating assets.</p> <p>We are looking for an Instrument & Controls (I&C) Lead for an upcoming project. This role will work with our team of engineers to identify and define solutions that reduce risk and grow installed production capacity. This role will provide Instrument and Controls support for site operations while ensuring safe and effective operations through managing risk, addressing questions, and minor modification activities. The Instrument & Controls Lead Engineer will be responsible for providing immediate front-line support for Operations and Maintenance teams to resolve minor issues and escalate more significant issues to the Central Engineering Team. This role will report to the Area Engineering Support Team Lead and will have I&C Engineers as direct reports.</p> <h4>Responsibilities</h4> <ul> <li>Production delivery, optimisation & excellent performance</li> <li>Responsible for day-to-day optimization of I&C systems to ensure safe, stable, and efficient process control, including loop tuning, alarm management, and SIS performance monitoring.</li> <li>Identifies production vulnerabilities and optimization opportunities to support production forecast and grow installed production capacity.</li> <li>Ensure control systems are operated within their design and operating envelopes; any deviations are reported, risk assessed, and managed via operational risk assessment processes.</li> <li>Lead or support root cause investigations (e.g., 5 Whys, fault tree analysis) for I&C-related process safety incidents, production losses, and product quality issues exceeding defined limits.</li> <li>Prioritize I&C vulnerabilities based on risk and production impact, ensuring corrective actions are focused on the highest-priority issues.</li> <li>Actively lead continuous improvement projects involving instrumentation, automation, and control systems; promote continuous improvement philosophy and engage site teams to drive improvement initiatives.</li> </ul> <h4>Qualifications</h4> <ul> <li>Above 10 years experience in oil and gas industry, preferably with international oil companies (direct or contract).</li> <li>Technical degree in engineering or relevant engineering subject.</li> <li>Experience in previous asset engineering or operations engineering role.</li> <li>Practical exposure to production facilities.</li> <li>Excellent communication, interpersonal, and coaching skills.</li> <li>Strong bias for being proactive and getting results.</li> <li>Excellent IT skills – Office suite, document management, applications for CMMS and change management.</li> <li>Contribute to an environment in which all team members are respected regardless of their individual differences and are motivated to improve both their individual and team contributions to achieve desired business results.</li> <li>Skilled in behaviour change management.</li> <li>Not essential but preferable: professional (chartered) engineer.</li> <li>Experience in roles in culturally and linguistically diverse working environments.</li> </ul> <h4>Preferred Qualifications</h4> <ul> <li>Certified professional engineer.</li> </ul> <p><strong>Belong. Connect. Grow. with KBR!</strong></p></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are looking for the right people - people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world's largest providers of products and services to the global energy industry.</p><p><b>Job Duties</b></p><p>Under broad direction from the Asset or Project Manager , the Surface Facilities Manager Senior, supports the Asset or Project Manager in managing the surface facilities activities in the asset. Handles the project management requirements for the Customer surface facilities work scope, potentially including project planning, FEED work, detailed design, construction, commissioning, start-up and/or abandonment activities. Expertise in managing design consultants to optimize the design and construction contractors to maximize productivity. Strong understanding of all aspects of risk management methodologies; including risk identification, assessment, prioritization and mitigation/control. Analyzes, plans, and tracks company resources to complete facility design and construction on time and on budget. Attends internal coordination meetings with PSLs and other Project/Asset department heads, and informs activity completion dates and issues. Coordinates environmental impact studies produced by engineering group to comply with governmental requirements. Attends internal and external meetings for work coordination. Communicates surface facility needs and plans to Customer, and obtains corresponding contractual approval. Approves final revision and Engineering and Construction Work Orders and corresponding invoices. Reviews AFE requests and submits for upper management approval. Possesses strong knowledge of all aspects of project management control systems; including project scheduling, cost estimating, change/variance orders, MoC processes, monthly reporting, etc.</p><p>Location Oils Opertion ST,N 29 Burjesia, Basra, Basrah, 61001, Iraq</p><p><br></p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><h2><br></h2><h2>Qualifications</h2><p>Requires an undergraduate degree in engineering or similar discipline, and preferably 8 years of progressive experience in planning, design, construction and project management of surface facilities in oil fields.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Under general supervision from the Production Manager, <br> The Production Supervisor works in a multi-discipline Asset Operations Team to develop potentially large and challenging unconventional plays and mature oil and gas fields. <br> Identifies innovative ways to apply HAL technology, service capability and expertise within the context of understanding the reservoir, production and facilities to design new, step-change field exploitation methodologies. <br> Integral member of the multi-discipline Production Team comprised of a reservoir engineer, production geologist and field personnel team. <br> Analyzes production history, well files, production equipment and decline curve analysis and nodal analysis of well performance to estimate remaining recoverable reserves, production and cost of upgrading equipment. <br> Selects and implements production technology, service capability and expertise including completion systems comprised of tubing selection, perforating, sand control and fine migration, matrix stimulation, water control and hydraulic fracturing; artificial lift equipment comprised of sucker-rod lift, gas lift, electrical submersible pumps, subsurface hydraulic pumps, progressing-cavity pumps and plunger lift; real-time surveillance and monitoring systems and waterflooding and other enhanced recovery techniques. <br> Uses decline curve analysis and nodal analysis to identify workovers or recompletions candidates and to select and upgrade production equipment. <br> Focuses on maintaining and increasing daily production through optimizing well performance and field operations while controlling operating costs. <br> Performs daily field operations including optimizing well behavior, production, water disposal, chemical injection and treatment, waterflood performance and artificial lift systems. <br> Evaluates proposed modifications to equipment or to operating procedures to improve safety, efficiency and reliability of equipment and ensures all modifications meet statutory and Company standards. <br> Develops and maintains good working relationships with Production Team through effective communication and teamwork.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Requires excellent communication skills and the ability to work closely with geologists, engineers, contractors and asset teams to successfully execute projects from concept to operation; over time, incumbent will become very knowledgeable of HAL technologies and solutions experience together with the exploitation methodologies and technologies that other companies apply. <br> Requires an undergraduate degree and a minimum of eight (8) years of industry experience. Degree in geology or engineering is preferred.</p><p></p></section>

<ul><li><p>Oversee accounting operations and treasury management.</p></li><li><p>Manage cash flows, payments, banking relationships, and liquidity.</p></li><li><p>Ensure financial accuracy, compliance, and operational continuity.</p></li><li><p>Lead general accounting, AP/AR, and treasury activities.</p></li><li><p>Manage financial closing, reporting, and audits.</p></li><li><p>Implement internal controls and accounting procedures.</p></li><li><p>Improve SAP systems and financial processes.</p></li><li><p>Lead accounting and treasury teams.</p></li><li><p>Coordinate with banks, auditors, partners, and internal stakeholders.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Master’s degree in Finance, Accounting, or equivalent.</p></li><li><p>10–15 years of experience in accounting and treasury roles.</p></li><li><p>Strong expertise in accounting, treasury, and financial reporting.</p></li><li><p>Good knowledge of SAP financial modules and systems.</p></li><li><p>Experience managing complex financial environments with high transaction volumes.</p></li><li><p>Strong leadership, team management, and confidentiality skills.</p></li><li><p>Detail-oriented with strong analytical and problem-solving abilities.</p></li><li><p>Ability to work effectively in complex and fast-paced environments.</p></li><li><p>Experience in international industrial or project-based environments.</p></li><li><p>Fluent in English and Arabic (mandatory); French is an advantage.</p></li></ul>

<ul><li><p>Lead procurement operations and material supply chain activities.</p></li><li><p>Manage sourcing, purchasing, suppliers, and contracts.</p></li><li><p>Ensure material availability and inventory optimization.</p></li><li><p>Drive cost efficiency and procurement improvements.</p></li><li><p>Ensure compliance with procurement policies and HSE standards.</p></li><li><p>Coordinate with suppliers, technical teams, and stakeholders.</p></li><li><p>Improve procurement processes and SAP systems.</p></li><li><p>Manage confidentiality of commercial and supplier information.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Master's degree or equivalent qualification.</p></li><li><p>Minimum of 15 years of experience in procurement and supply chain management.</p></li><li><p>Strong expertise in procurement, material management, and supply chain optimization.</p></li><li><p>Proficiency in SAP and procurement systems.</p></li><li><p>Experience in industrial or project environments, preferably in the oil and gas sector.</p></li><li><p>Strong leadership, team management, and problem-solving skills.</p></li><li><p>Ability to perform effectively in complex, fast-paced environments.</p></li><li><p>Experience working in multinational organizations.</p></li><li><p>Fluent in English and Arabic (mandatory); French is an advantage.</p></li></ul>

<p>The Mechanical &amp; Rotating QC Inspector is responsible for monitoring, supervising, and controlling all Quality Control activities related to mechanical static and rotating equipment within the AGUP2 Project CPF2 Package. He ensures that all contractual, technical, and quality requirements are properly implemented by the Contractor and Subcontractors during Construction, Pre-commissioning, and Commissioning phases. The position reports directly to the CPF2 Site QC Superintendent and works closely with Construction, Commissioning, QC disciplines, Vendors, and Contractor/Subcontractor teams .</p><p><strong>MAIN MISSIONS/RESPONSIBILITIES</strong></p><p><strong>Daily Inspection &amp; Reporting</strong></p><ul><li>Monitor and record all rotating equipment activities on a daily basis.</li><li>Conduct routine inspections in construction areas, equipment installation zones, and pre-commissioning areas.</li><li>Perform specific inspections on rotating machinery and associated installation activities.</li><li>Provide daily update and weekly reporting directly to the CPF2 Site QC Superintendent, covering:</li><ul><li>Inspection progress and key findings</li><li>Non-conformities and recurring defects</li><li>Critical issues requiring escalation or arbitration</li><li>Status of corrective actions</li><li>Quality trends and contractor performance indicators</li></ul><li>Contribute actively to daily/weekly QC coordination meetings and ensure the QC Superintendent receives all relevant data for consolidated site reporting.</li><li>Maintain up-to-date records, ITP follow-up, NCR/CAR tracking, and Mechanical Completion documentation enabling full visibility for the QC Superintendent.</li></ul><p><strong>Rotating Equipment Installation &amp; Inspection</strong></p><ul><li>Inspect rotating equipment such as: Pumps (centrifugal, reciprocating, screw), Compressors (reciprocating, centrifugal), Turbines, Electric motors, Blowers and fans</li><li>Verify foundations, grout, anchor bolts, leveling, and mounting conditions for rotating equipment.</li><li>Check alignment (cold/hot), coupling installation, run-out, and shaft rotation.</li><li>Verify lubrication systems, mechanical seals, and auxiliary systems.</li><li>Review and validate inspection reports, punch lists, and test results (vibration, performance, run-in).</li><li>Ensure compliance with vendor documentation, project specifications, and industry standards.</li></ul><p><strong>Pre-Commissioning &amp; Commissioning</strong></p><ul><li>Witness and verify rotating equipment pre-commissioning activities: Oil flushing, Lubrication system checks, Motor solo-run, Direction of rotation, Alignment verification</li><li>Participate in commissioning tests: Vibration analysis, Performance testing, Functional checks</li><li>Ensure all rotating equipment is ready for handover to Commissioning.</li></ul><p><strong>Documentation &amp; Compliance</strong></p><ul><li>Review and comment on Contractors' and Suppliers' ITPs, Method Statements, and procedures.</li><li>Ensure proper implementation of approved drawings, QC plans, surveillance plans, and ITPs.</li><li>Verify vendor documentation, equipment certification files, and material certificates.</li><li>Issue Quality Records, NCRs, and CARs when required.</li><li>Ensure proper traceability of inspections, tests, and mechanical completion documentation.</li></ul><p><strong>Welding, NDT &amp; Interfaces (Only where rotating equipment interfaces with piping or structural supports)</strong></p><ul><li>Coordinate with QC Welding, NDT, Piping, and Structural teams for interface inspections.</li><li>Verify NDT results related to rotating equipment supports, baseplates, and connected piping.</li><li>Ensure correct implementation of flange alignment and piping connection tolerances.</li></ul><p><strong>Non-Conformities &amp; Corrective Actions</strong></p><ul><li>Identify and report non-conformities or deviations in a timely manner.</li><li>Ensure corrective actions are implemented and verified.</li><li>Immediately escalate critical anomalies to the QC Superintendent.</li></ul><p><strong>Coordination &amp; Interface</strong></p><ul><li>Participate in daily/weekly construction and QC coordination meetings.</li><li>Interface with Construction, Commissioning, Engineering, Vendors, and Contractor QC teams.</li><li>Support technical clarifications and design queries with Engineering when required.</li><li>Participate in audits (Construction, HSE, QC) and site visits.</li><li>Ensure confidentiality of all documentation under responsibility.</li></ul><p><strong>Scope of Work</strong></p><p><strong>Rotating Equipment</strong></p><p>The Mechanical &amp; Rotating QC Inspector covers the following equipment categories:</p><ul><li><strong>Rotating Equipment</strong><ul><li>Centrifugal pumps</li><li>Reciprocating pumps</li><li>Screw pumps</li><li>Centrifugal compressors</li><li>Reciprocating compressors</li><li>Gas/steam turbines</li><li>Electric motors</li><li>Blowers and fans</li><li>Mechanical packages containing rotating components</li></ul></li><li><strong>Associated Systems</strong><ul><li>Alignment systems (laser, dial indicator)</li><li>Lubrication systems</li><li>Mechanical seals</li><li>Couplings</li><li>Vibration monitoring systems</li><li>Auxiliary systems (cooling, sealing, lubrication)</li></ul></li></ul><p><strong>Desired Candidate Profile</strong></p><p>Professional Experience Minimum 10 years of experience in Mechanical &amp; Rotating QC on major Oil &amp; Gas EPC projects. Strong experience with rotating equipment installation, alignment, and commissioning. Experience on CPF, refinery, or large industrial facilities is strongly preferred. Demonstrated ability in resource planning, decision-making, and team coordination.</p><p>Technical Competencies Solid knowledge of rotating equipment ( pumps, compressors, turbines, motors, fans ). Strong understanding of mechanical installation requirements ( alignment, foundations, couplings ). Ability to interpret standards, codes, specifications, and technical drawings. Proficiency with measuring instruments ( micrometers, calipers, dial indicators, laser alignment tools ). Knowledge of vibration analysis and performance testing. Understanding of NCR, deviation, and concession processes. Familiarity with digital QC systems ( Aconex, SharePoint, SmartPlant, or equivalent ) is a plus.</p><p>Behavioral Competencies Exemplary behavior regarding Company Code of Conduct and HSSE rules. Ensure that all HSSE training are completed and HSE rules implemented within his area of responsibility. Ability to represent the Company in discussions and meetings with Vendors, Contractors, and Subcontractors. High attention to detail and strong reporting discipline. Ability to work autonomously in a harsh, remote site environment. Leadership, team spirit, and resilience under pressure. Ability to transfer knowledge to team members. Fluent English (mandatory).</p>

<p><h4>About company</h4> <p>Belong, connect, grow, with KBR! The KBR team delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals. KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Job purpose</h4> <p>Production Technologist is part of the Well Reservoir Facilities Management team in the Petroleum Engineering Department. The primary job purpose is to ensure technical support to wells performance, close monitoring and maintain well integrity, respond to production planning and reservoir engineers requests for well deliverability and optimization decisions.</p> <h4>Duties and responsibilities</h4> <ul> <li>Daily production of well performance, spot anomalies, diagnose well production issues and performance monitoring according to well operating envelope.</li> <li>Monitor and manage well integrity to minimize deferment and ensure HSE policies compliance in a safe working environment.</li> <li>Daily monitoring of workover activities (hoist, rigless-perforation, stimulation, clean up, tie-in, opening up etc).</li> <li>Production enhancement and optimisation strategy evaluation and implementation.</li> <li>Recommend well recompletion/well intervention activities, supervise on site, and support FDP implementation.</li> <li>Regular update of well operating envelope according to reservoir management plan and work closely with production planning and production operations.</li> <li>Identify, propose and evaluate opportunities to improve hydrocarbon production and reservoir recovery.</li> <li>Provide support to other groups for well intervention, generate proposal, data acquisition, drilling and workover, etc.</li> <li>Coordinate and conduct completion meetings, internally and externally (other department and vendors).</li> <li>Maintain, perform nodal analysis and update IPM model to support WRFM team on future reservoir development, depletion planning and reserves assessment.</li> <li>Conduct well and reservoir review, present recommendation to team and stakeholders as required.</li> <li>Ensure integration and consistency between engineering and geological interpretations by close collaboration with reservoir engineer and production planners, petrophysicists, geologists, geophysicist, operations and facilities engineers.</li> <li>Peer review less experienced team members.</li> </ul> <h4>Qualifications</h4> <ul> <li>Minimum of a Bachelor degree in Petroleum Engineering, Reservoir Engineering or engineering from an accredited and recognized university.</li> <li>Previously working in a multi-cultural and multi-nationalities team.</li> <li>Knowledge of well completion, intervention, drilling and workover procedures and regulations.</li> <li>Oil and Gas, wells design and integrity monitoring and management from conceptual and construction until abandonment.</li> </ul> <h4>Experience</h4> <ul> <li>Minimum 10-15 years’ experience with an operator.</li> <li>Experience in both clastic and carbonate reservoirs production strategies.</li> <li>Previously working in a multi-cultural and multi-nationalities team, international experience.</li> </ul> <h4>Language proficiency, computer and software skills</h4> <ul> <li>Must be able to speak upper intermediate and above English. Arabic is an advantage.</li> <li>Experience and knowledge of advanced level nodal analysis especially using Integrated Production System Model (IPSM) modelling software.</li> <li>Experience in other petroleum engineering standard software (intermediate level): PI, Eclipse, PVTSim, Kappa’s Saphire.</li> </ul> <h4>Skills</h4> <ul> <li>Good communication and analytical skills are essential.</li> <li>Eagerness to learn and develop own skills.</li> <li>Strong leadership skills, ability to delegate, and work with minimum supervision.</li> <li>Must have a HSSE driven mindset.</li> <li>The ability to work with people from different cultural backgrounds will be essential.</li> <li>The position will involve working with government, vendors or partner representatives.</li> <li>Ability to quickly determine the optimal production solution, with often conflicting or missing data or information.</li> <li>Experience and good understanding of completion, workover, stimulation design, well test analysis, production forecast and artificial lifts.</li> <li>Experience in supervising operations of production enhancements, well completion, intervention and workover procedures and regulations.</li> <li>Proven wells integrity monitoring and management from drilling, production until abandonment.</li> <li>Good diagnostic skills are required to troubleshoot problems.</li> </ul></p><p></p>

<ul><li><p>Define and implement communication and stakeholder engagement strategies.</p></li><li><p>Lead internal and external communications, including media, digital, and events.</p></li><li><p>Manage reputation topics and crisis communications.</p></li><li><p>Build relationships with media, authorities, and key stakeholders.</p></li><li><p>Develop corporate content, press releases, and executive messaging.</p></li><li><p>Ensure consistent corporate messaging and standards.</p></li><li><p>Support stakeholder engagement and project acceptability initiatives.</p></li><li><p>Coordinate communications across teams and entities.</p></li><li><p>Promote HSE culture through communication activities.</p></li><li><p>Ensure confidentiality of sensitive corporate information.&nbsp;</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Master’s degree in Communications, Public Affairs, or equivalent.</p></li><li><p>8–12 years of experience in corporate communications.</p></li><li><p>Strong expertise in stakeholder engagement, media relations, and reputation management.</p></li><li><p>Experience in crisis communication and strategic messaging.</p></li><li><p>Strong skills in content creation and communication strategy.</p></li><li><p>Excellent influencing, communication, and interpersonal skills.</p></li><li><p>Ability to operate in sensitive and high-pressure environments.</p></li><li><p>Strong project management and coordination capabilities.</p></li><li><p>Experience in multinational or complex institutional environments.</p></li><li><p>Good understanding of regional dynamics and communication challenges.</p></li><li><p>Fluent in English and Arabic (mandatory); French is an advantage.</p></li></ul>

<p><h4>Belong, connect, grow, with KBR!</h4> <p>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</p> <p>KBR provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Location</h4> <p>Iraq - KBR office<br> 28/28 rotation</p> <h4>Job purpose</h4> <p>Define piping design bases, codes, standards, and deliverables to ensure safe, reliable, and cost-effective solutions.<br> Single point of contact for piping deliverables and activities related to piping materials.<br> Interface with client, vendor, and other stakeholders for successful execution of the project.<br> Coordinate with multi-disciplinary teams (process, mechanical, civil, electrical, instrumentation) and vendors to ensure integrated piping systems.<br> Mentor engineers, drive quality, and ensure schedule adherence for piping deliverables across project phases.</p> <h4>Key responsibilities</h4> <ul> <li>Develop and review piping design basis, piping material specifications, datasheets, and technical bid evaluations.</li> <li>Ensure compliance with applicable codes and standards and project-specific requirements.</li> <li>Develop standard deliverables, various datasheets, and requisition packages related to piping.</li> <li>Experience in non-metallic piping (GRE / HDPE) procurement and specifications.</li> <li>Provide in-depth technical support for material selection involving metallic and non-metallic piping systems.</li> <li>Participate in material selection and corrosion review sessions to ensure suitable materials for service conditions.</li> <li>Review and approve technical deliverables (isometrics, P&IDs, BOMs, MOC/Change Notes, design change requests, technical queries).</li> <li>Demonstrated knowledge of material tracking throughout the project cycle.</li> <li>Understand the MOC process and employ effective change management throughout the lifecycle of the project.</li> <li>Contribute to lessons learnt from the project.</li> <li>Report to department manager/lead engineer for the project.</li> </ul> <h4>Experience</h4> <ul> <li>12+ years of experience in concept, FEED and detail engineering and EPCM experience in the oil & gas industry.</li> <li>Experience with Middle East clients like ADNOC, BP, BOC, PDO, Total Energies & Qatar Energies is highly preferred.</li> <li>Familiarity with onshore and offshore facilities and carried out greenfield and brownfield projects.</li> <li>Experience working with multicultural project teams across various project execution centers.</li> <li>Familiarity with international piping codes and standards such as ASME B31.3, ASTM, API, and NACE MR0175/ISO 15156.</li> </ul> <h4>Qualifications</h4> <ul> <li>Master or bachelor of engineering in a related field.</li> <li>Professional membership or relevant certifications (e.g., PE/Chartered Engineer) are a plus.</li> <li>Certification related to piping design or stress analysis is advantageous.</li> </ul> <h4>Technical skills</h4> <ul> <li>Strong background in piping design, engineering, stress analysis, and support design.</li> <li>Proficiency with piping design software and calculation tools (e.g., CAESAR, AutoPIPE and 3D modeling tools).</li> <li>Technical experience to prepare manhours estimation for different types of piping activities and deliverables of different phases of the project like select phase, FEED and execution.</li> <li>Familiarity with codes, standards, regulations and practices applicable to the design and construction of various facilities.</li> <li>Hands-on knowledge of codes and standards relevant to piping.</li> <li>Experience with high-pressure piping, thermal insulation, coatings, and corrosion considerations.</li> <li>Diverse working experience in project management, conceptual, FEED and detailed design, and construction.</li> <li>Knowledge of interdisciplinary work processes, interfaces, and deliverables.</li> <li>Responsible for the training and development of engineers in his/her team.</li> <li>Adherence to company processes and procedures and handle internal and external project audits.</li> <li>Proven experience in vendor qualification, technical bid evaluation, and factory audits.</li> </ul> <h4>Soft skills</h4> <ul> <li><strong>Communication:</strong> Clear, concise communication with technical and non-technical stakeholders.</li> <li><strong>Problem solving:</strong> Proactive identification and mitigation of piping-related risks.</li> <li><strong>Project management:</strong> Planning, scheduling, risk management, and deliverable tracking.</li> <li><strong>Influence & collaboration:</strong> Effective collaboration with clients, vendors, and internal teams.</li> <li><strong>Adaptability:</strong> Comfort in dynamic project environments and changing technical requirements.</li> <li><strong>Attention to detail:</strong> Rigorous approach to reviews, calculations, and documentation.</li> <li><strong>Safety mindset:</strong> Commitment to health, safety, and environment (HSE) standards.</li> <li><strong>Critical thinking:</strong> Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems.</li> </ul></p><p></p>

<p><h4>Belong, connect, grow with KBR!</h4> <p>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</p> <p>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Job description: HVAC mechanical lead – oil & gas / power projects</h4> <p><strong>Company:</strong> KBR Iraq<br> <strong>Location:</strong> Majnoon Oil Field, Iraq (Rotation Alignment 28/28)<br> <strong>Nationality:</strong> Iraqi nationals preferred</p> <p>The HVAC Mechanical Lead is responsible for overseeing all heating, ventilation, and air-conditioning systems across Majnoon Oil Field Projects. This role ensures safe, reliable, and compliant operation of HVAC assets in line with KBR standards, client specifications, and Iraq oil & gas regulatory requirements. The position leads a team of HVAC technicians, coordinates maintenance activities, and supports project execution for upgrades, shutdowns, and new installations.</p> <h4>Accountability / expectations</h4> <ul> <li>Lead and supervise HVAC teams, ensuring daily tasks are executed safely and efficiently.</li> <li>Manage preventive, corrective, and predictive maintenance programs for all HVAC systems, including chillers, package units, split units, ventilation systems, and industrial cooling equipment.</li> <li>Conduct technical troubleshooting, root-cause analysis, and performance diagnostics on mechanical and electrical HVAC components.</li> <li>Ensure compliance with KBR HSSE policies, client standards, and international codes.</li> <li>Review and approve HVAC work permits, job hazard analyses, and method statements.</li> <li>Coordinate with Operations, Electrical, Instrumentation, and Projects teams to support field activities and shutdown planning.</li> <li>Oversee contractor performance, ensuring quality workmanship and adherence to specifications.</li> <li>Maintain accurate documentation: maintenance logs, equipment history, spare-parts records, and inspection reports.</li> <li>Support project engineering teams with HVAC design reviews, material requisitions, and technical evaluations.</li> <li>Monitor inventory levels and ensure availability of critical spares and consumables.</li> <li>Train and mentor HVAC technicians, promoting competency development and safe work practices.</li> <li>Participate in incident investigations and implement corrective actions to prevent recurrence.</li> <li>Ensure HVAC systems operate efficiently to support critical facilities such as control rooms, substations, accommodation units, and workshops.</li> </ul> <h4>Education</h4> <p>Bachelor’s degree or diploma in mechanical engineering or HVAC technology.</p> <h4>Experience</h4> <ul> <li>10+ years of HVAC experience in oil & gas, petrochemical, or heavy industrial environments.</li> <li>Strong knowledge of HVAC mechanical systems, refrigeration cycles, ducting, ventilation, and industrial cooling.</li> <li>Experience supervising multi-disciplinary maintenance teams.</li> <li>Proven understanding of HSSE requirements in hazardous environments.</li> <li>Ability to interpret engineering drawings, P&IDs, and technical specifications.</li> <li>Strong communication and leadership skills.</li> </ul></p><p></p>

<p><h4>Job description</h4> <p>The E&I Construction Supervisor supports the Construction E&I Lead in delivering safe, efficient, and high-quality field execution. The role focuses on supervising daily electrical and instrumentation construction activities, ensuring compliance with project requirements, and coordinating closely with contractors, engineering, and commissioning teams. This position requires solid technical experience, strong field supervision capability, and disciplined execution of work packages under the direction of the Lead.</p> <h4>Accountability / expectations</h4> <ul> <li>Promote safe work practices and ensure crews follow all electrical and instrumentation safety rules, permit requirements, and site procedures.</li> <li>Execute construction activities in accordance with approved drawings, work packages, and instructions provided by the Construction E&I Lead.</li> <li>Supervise contractor teams performing cable pulling, termination, installation of instruments, panels, junction boxes, and electrical equipment.</li> <li>Identify field issues such as routing clashes, accessibility concerns, and installation constraints, escalating them to the Lead for resolution.</li> <li>Track daily progress (cable pulling, terminations, loop completion) and report deviations or delays to the Lead.</li> <li>Support construction sequencing for electrical load transfer, instrument migration, and control system cutover as directed.</li> <li>Provide field input during constructability reviews, focusing on practical installation concerns, hazardous area compliance, and maintainability.</li> <li>Coordinate with other disciplines to ensure safe SIMOPS execution, proper tie-in preparation, and efficient brownfield/greenfield work.</li> <li>Ensure engineering and procurement deliverables received at site (SLDs, ILDs, P&IDs, I/O lists, datasheets, cable drums, panels) are verified and ready for installation.</li> <li>Prepare and verify work package components such as cable schedules, termination sheets, loop diagrams, and material take-offs under guidance from the Lead.</li> <li>Maintain accurate red-line markups, as-built updates, and test documentation for handover.</li> <li>Ensure installation complies with standards, requirements, grounding/bonding rules, and project specifications.</li> <li>Support commissioning teams with loop testing, instrument calibration, energization preparation, and functional testing activities.</li> <li>Monitor contractor performance, manpower allocation, and work-front readiness, escalating resource gaps or performance issues.</li> <li>Implement Work Face Planning by ensuring crews receive validated work packages and required materials.</li> <li>Support coordination with operations for safe execution in live plant areas.</li> <li>Apply cold-work strategies such as pre-terminated cables, pre-assembled cabinets, and modular assemblies when instructed by the Lead.</li> <li>Ensure construction execution aligns with project quality, schedule, and scope expectations.</li> </ul> <h4>Education</h4> <p>BSc. in Instrumentation, Electrical Engineering, or related discipline.</p> <h4>Experience requirements</h4> <ul> <li>Minimum 5–10 years experience in Oil & Gas E&I construction.</li> <li>Strong understanding of:</li> <ul> <li>LV/MV electrical distribution</li> <li>Instrument installation and calibration</li> <li>Loop testing and commissioning workflows</li> </ul> <li>Experience supervising E&I construction crews and contractors.</li> <li>Ability to manage multiple work fronts under direction from the Lead.</li> <li>High attention to detail, quality, and safe execution.</li> </ul></p><p></p>