Embedded Systems Engineer Jobs in Iraq

<p><h4>Essential responsibilities:</h4> <p>Aerostat operators/user-level maintainers will participate in the overall, hands-on operation of the aerostat system including launch, in-flight, recovery, and moored activities.</p> <p>Candidates will perform all functions to operate the Persistent Ground Surveillance System (PGSS) and Persistent Threat Detection System (PTDS), an aerostat mounted Intelligence, Surveillance, and Reconnaissance (ISR) platform, its Mobile Mooring Platform (MMP), sensor payloads, communications and navigation systems, as well as associated support equipment including boom lift, forklift, all-terrain vehicles (ATVs), and electrical power generators.</p> <p>Additional responsibilities include performing analyses of system operations. Candidates must have:</p> <ul> <li>Knowledge of and experience in the operations of hardware systems and components.</li> <li>Experience in fault detection, isolation, and correction of hardware systems and individual components.</li> <li>Ability to perform routine system maintenance and analysis functions including hardware configurations; adding, removing, and replacing hardware components; use of hardware and software diagnostic testing tools; reading of electronic circuit schematics; and repairing printed circuit boards.</li> </ul> <p>Candidates will perform user-level maintenance functions including performing hands-on Preventative Maintenance Checks and Services (PMCS), troubleshooting, removing and replacing Line Replaceable Units (LRUs), and removing and replacing payloads.</p> <p>Candidates must possess a diverse range of skills with the ability to quickly adapt to new situations. Tasks will be performed under the direction of higher classified technicians and/or site personnel.</p> <h4>Minimum requirements:</h4> <ul> <li>High school diploma or equivalent is required.</li> <li>Two-year associate’s degree in a technical field from an accredited college can substitute for work experience.</li> <li>Must have an active Secret US Government clearance. US citizenship is required to obtain a Secret clearance.</li> <li>At least one year previous aerostat experience.</li> <li>Certified and school trained on 34M and 74K.</li> <li>Must have a valid U.S. passport with a minimum of one year remaining.</li> <li>Must have a valid US driver’s license.</li> <li>Knowledge of and experience in the operations of hardware systems and components.</li> <li>Experience in fault detection, isolation, and correction of hardware systems and individual components.</li> <li>Ability to perform routine system maintenance and analysis functions including hardware configurations; adding, removing, and replacing hardware components; use of hardware and software diagnostic testing tools; reading of electronic circuit schematics; and repairing printed circuit boards.</li> </ul> <h4>Physical requirements:</h4> <ul> <li>Requires the ability to regularly lift up to 50 lbs.</li> <li>Requires the ability to regularly climb extension ladders, roof ladders, stepladders, and stairs at least 10 times during shift.</li> <li>Requires the flexibility to bend/stoop and squat repetitively during shift.</li> <li>Requires the ability to regularly kneel repetitively during shift.</li> <li>Requires the ability to move in a 90-degree fashion on a repetitive basis during shift.</li> <li>Requires the ability to stretch/reach on a repetitive basis during shift.</li> <li>Requires the ability to walk extensively throughout the plant during shift.</li> <li>Requires the ability to interact with all clients in a professional and friendly manner despite periods of stress.</li> </ul> <h4>Medical requirements:</h4> <ul> <li>Successfully complete and pass the medical and dental examinations as required for deployment to Iraq.</li> <li>Must maintain physical and dental requirements for the duration of the deployment.</li> </ul> <h4>Working and living conditions:</h4> <p>This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to an extreme and austere desert-like environment. Temperatures can reach 120-130 degrees Fahrenheit (50-55 degrees Celsius) during the summer months.</p> <p>Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to CENTCOM, EUCOM, and AFRICOM for extended periods.</p> <p>Work schedules are a minimum of six days per week and ten hours per day, while some jobs have higher daily and weekly minimums.</p></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Construction Supervisor-HVAC Mechanical-Onsite<br><br><p><b>Job Description:</b> HVAC Mechanical Supervisor – Oil &amp; Gas / Power Projects</p><br><br><p><b>Company:</b> KBR Iraq</p><br><br><p><b>Location:</b> Majnoon Oil Field, Iraq (Rotation 28/28)</p><br><br><p><b>Nationality</b>: Iraqi Nationals Preferred</p><br><br><p><b><i>"Belong, Connect, Grow, with KBR!</i></b></p><br><br><br><p><b><i>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</i></b></p><br><br><p><b><i>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets."</i></b></p><br><br><br><p><b>Job Scope</b></p><br><br><p>The HVAC Mechanical Supervisor is responsible for supervising day‑to‑day heating, ventilation, and air‑conditioning activities across Majnoon Oil Field Projects. The role ensures safe, reliable, and compliant operation of HVAC systems in accordance with KBR standards, client specifications, and Iraq oil &amp; gas regulatory requirements. The Supervisor oversees HVAC technicians, executes maintenance plans, and supports project works including upgrades, shutdowns, and new installations.</p><br><br><p><b>Accountability / Expectations</b></p><br><br><ul><li>Supervise HVAC technicians and ensure daily tasks are completed safely, efficiently, and in compliance with KBR HSSE requirements.</li><li>Execute preventive, corrective, and predictive maintenance programs for chillers, package units, split units, ventilation systems, and industrial cooling equipment.</li><li>Perform technical troubleshooting, root‑cause analysis, and diagnostics on mechanical and electrical HVAC components.</li><li>Ensure adherence to KBR HSSE policies, client standards, and relevant international codes.</li><li>Review and support preparation of HVAC work permits, job hazard analyses, and method statements.</li><li>Coordinate with Operations, Electrical, Instrumentation, and Projects teams to support field activities and shutdown schedules.</li><li>Monitor contractor activities, ensuring quality workmanship and compliance with specifications.</li><li>Maintain accurate documentation including maintenance logs, equipment history, spare‑parts records, and inspection reports.</li><li>Assist project engineering teams with HVAC design reviews, material requisitions, and technical evaluations.</li><li>Track inventory levels and ensure availability of critical spares and consumables.</li><li>Train, guide, and mentor HVAC technicians to support competency development and safe work practices.</li><li>Participate in incident investigations and support implementation of corrective actions.</li><li>Ensure HVAC systems operate effectively to support critical facilities such as control rooms, substations, accommodation units, and workshops.</li></ul><p><b>Education</b></p><br><br><p>Bachelor’s Degree or Diploma in Mechanical Engineering or HVAC Technology.</p><br><br><p><b>Experience</b></p><br><br><p>Minimum 8 years of HVAC experience in oil &amp; gas, petrochemical, or heavy industrial environments.</p><br><br><p>Technical &amp; Professional Requirements</p><br><br><p>Strong knowledge of HVAC mechanical systems, refrigeration cycles, ducting, ventilation, and industrial cooling.</p><br><br><p>Experience supervising multi‑disciplinary maintenance teams.</p><br><br><p>Solid understanding of HSSE requirements in hazardous environments.</p><br><br><p>Ability to interpret engineering drawings, P&amp;IDs, and technical specifications.</p><br><br><p>Effective communication, leadership, and team‑coordination skills.</p><br><br><br><br><br><br> </div>

<p><br></p><p>Your employment contract will be managed by Eni International Resources Ltd (EIRL).</p><p>Main responsibilities :</p><p>Reference is made to the Annex G of the MSG Anti-Corruption on "Relations with Relevant Subjects".</p><p>The Job Holder is authorized and has the power to interact with the Public Authorities and Relevant Private Entities (as defined in Annex G), in accordance with the process laid down in the Annex, strictly for the purposes of discharging his/her official responsibilities detailed in this job description.</p><p>Ensure accuracy and integrity of procurement data, systems, and reports; perform quality checks and gap analysis.</p><p>Develop and maintain Procurement Plans aligned with projects; monitor progress and suggest corrective actions.</p><p>Produce and optimize internal/external reports and dashboards; support management with data-driven insights.</p><p>Liaise with business units for planning, compliance, and documentation; facilitate meetings and training sessions.</p><p>Support audits and regulatory inquiries; maintain proper records and ensure compliance with company policies and standards.</p><p>Implement and update C&amp;P procedures, compliance policies, and templates; advise on regulatory changes and deliver targeted training.</p><p>Promote continuous improvement in compliance, reporting, and planning processes; propose new practices and systems.</p><p>Ensure accurate data entry in systems (SAP, File Maker, Pie) and maintain workload updates.</p><p>Prepare ad-hoc analyses to support sourcing strategies and process optimization.</p><p>Perform additional tasks and ad-hoc analysis assigned by management.</p><p><strong>Desired Candidate Profile</strong></p><p>Degree in Engineering, Economics, or Law</p><p>Experience in oil &amp; gas projects in Compliance, Reporting, Planning and Auditing areas</p><p>Proven track record in complex international O&amp;G projects (onshore and offshore).</p><p>knowledge of international contractual formats and corporate/project governance.</p><p>High computer literacy with proficiency in Microsoft Visio, Project, Word, Excel, Access, and PowerPoint.</p><p>Familiarity with SAP and e-Procurement systems (e.g., Ariba, Jaggaer, Smart GEP etc.)</p><p>Fluency in written and spoken English, especially contract terminology.</p><p>Ability to work collaboratively across disciplines and with third parties.</p><p>High integrity, strong organizational and analytical skills.</p><p>Knowledge of oilfield contracts, procurement methods, terminology, and equipment.</p><p>Proficient in auditing, monitoring, and organizational processes to ensure compliance and efficiency.</p><p>Strategic and analytical thinker with excellent problem-solving skills and attention to detail.</p><p>Effective collaborator with proven ability to work across diverse cultures and disciplines.</p><p>Team leadership and mentoring skills, fostering professional growth through a collaborative approach.</p><p>High integrity and ethical standards, ensuring compliance with company policies and procedures.</p><p>Results-driven, delivering tasks within deadlines while maintaining quality and compliance.</p><p>Innovative mindset, applying creativity to develop practical solutions and process improvements.</p><p>negotiation skills aligned with company objectives.</p><p>Comprehensive knowledge of strategic, technical, legal, financial, taxation, and commercial aspects of procurement.</p><p>CIPS (Level 5+) or equivalent (APS, CPP/CPPM)</p><p>MBA or similar advanced education</p><p>Understanding of commodity markets, price trends, and material specifications.</p><p>Applied expertise in local content development and regulatory compliance.</p><p>Previous Middle East experience.</p><p>Arabic fluency is considered an advantage.</p>

<p><b>Main Duties and Responsibilities:</b></p><p>Lead, mentor, and develop the finance team to ensure high performance and adherence to financial standards.</p><p>Design, implement, and continuously improve financial processes, internal controls, and reporting systems.</p><p>ERP Implementation and Chart of Accounts preparation and Module integration.</p><p>Collaborate with the project teams, consultants, and other units, etc. for the budget preparation and collect necessary information which is required for the financial planning.</p><p>Implement banking strategy and proactively plan for the treasury and working capital for the short-term and long-term financial planning.</p><p>Negotiate with banks for the charges and the options to execute the transfers without delays.</p><p>Prepare and deliver financial reports, analyses, and recommendations to senior management for informed decision-making.</p><p>Perform budget vs. actual analyses, highlighting variances and proposing corrective actions or cost-saving strategies.</p><p>Oversee payroll processing, including calculations, deductions, approvals, and record maintenance.</p><p>Execute internal and external payments in accordance with approvals and organizational procedures.</p><p>Monitor project expenditures, track commitments, and ensure alignment with approved budgets and funding sources.</p><p>Ensure compliance with tax obligations, social security reporting, and other statutory requirements.</p><p>Support employees in banking matters, including account setup and necessary identification processes.</p><p>Manage relationships with banks, vendors, and key stakeholders to ensure smooth and timely financial operations.</p><p>Identify opportunities to optimize workflows, reduce financial risk, and enhance reporting accuracy.</p><p>Report any issues or discrepancies promptly to the line manager or HR and take corrective measures.</p><p>Adhere to organizational values, policies, and procedures in all financial activities.</p><p>Identify the risk involved in the transactions and provide suggestions to senior management for mitigating the risk.</p><p>Perform any other tasks assigned by the line manager.</p><p><strong>Desired Candidate Profile</strong></p><p>Bachelor s degree in Finance, Accounting, Economics, or a related field.</p><p>A master's degree or finance-related certification (e.g., CPA, ACCA, CFA, CMA) is highly desirable.</p><p>Previous experience [7-9 years] in finance and accounting, financial management, accounting, or auditing.</p><p>Minimum [2 3 years] in a supervisory or managerial role.</p><p>Proven experience in budgeting, financial reporting, and audit coordination.</p><p>Strong organization, planning, and execution skills.</p><p>Strong leadership and team management skills.</p><p>Excellent analytical, budgeting, and financial forecasting abilities.</p><p>In-depth knowledge of accounting principles, financial systems, and audit practices.</p><p>Excellent attention to detail and high level of accuracy.</p><p>Proficiency in Microsoft Excel and financial reporting tools.</p><p>Solid understanding of accounting principles and financial statements.</p><p>Strong English is required; Kurdish is desired.</p><p>Prepared to work additional hours when required.</p><p>Report any issues to the line manager or HR.</p><p>Adhere to SP office values, policies, and procedures.</p><p>Traveling to other locations within or outside the country for work and staying overnight.</p><p>Maintain confidentiality of information.</p><p>Government experience</p><p>Experience using accounting or ERP systems.</p><p>Background in developing or improving financial management systems.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Deadline for Applications</b></p><br><br><br><br><br><br><br><br>August 4, 2026<p><b>Grade</b></p><br>NOA<p><b>Staff Member / Affiliate Type</b></p><br><br><br><br><br><br><br><br>National Professional Officer<p><b>Reason</b></p><br>Temporary &gt; Temporary Assignment/ Appointment<p><b>Hardship Level</b></p><br><br><br><br><br><br><br><br>D<p><b>Family Type</b></p><br><br><br><br><br><br><br><br>Non Family<span><span><span><span><span><span><span><span><span>&lt;p&gt;&lt;/p&gt;&lt;p&gt;&lt;/p&gt;</span></span></span></span></span></span></span></span></span><p><b>Residential location (if applicable)</b></p><br><br><br><br><br><br><br><br><p><b>Target Start Date</b></p><br><br><br><br><br><br><br><br>2026-08-01<p><b>Target End Date</b></p><br><br><br><br><br><br><br><br>2026-12-31<p><b>Standard Job Description</b></p><br><p>Assistant Community-Based Protection Officer<br>Organizational Setting and Work Relationships<br>The Assistant Community-Based Protection Officer is a member of the Protection Unit in a Country Operation and may report to the Protection Officer, Community-Based Protection Officer, or another more senior staff member in the Protection Unit. Under the overall direction of the Protection Unit, and in coordination with other UNHCR staff, government, NGO partners and other stakeholders, the Assistant Community-Based Protection Officer works directly with communities of concern to identify the risks they face and to leverage their capacities to protect themselves, their families and communities. The incumbent may have direct supervisory responsibility for part of the protection and/or support staff and supports the application of community-based protection standards, operational procedures and practices in community-based protection delivery at the field level. To fulfil this role the Assistant Community-Based Protection Officer is required to spend a substantial percentage of the workday outside the office, building and maintaining networks within communities of persons of concern (PoC). The development and maintenance of constructive relationships with PoC that measurably impact and enhance protection planning, programming and results form the core of the work of the incumbent. S/he also supports the designing of a community-based protection strategy by ensuring that it is based on consultation with PoC.</p><br><p><br>All UNHCR staff members are accountable to perform their duties as reflected in their job description. They do so within their delegated authorities, in line with the regulatory framework of UNHCR which includes the UN Charter, UN Staff Regulations and Rules, UNHCR Policies and Administrative Instructions as well as relevant accountability frameworks. In addition, staff members are required to discharge their responsibilities in a manner consistent with the core, functional, cross-functional and managerial competencies and UNHCR's core values of professionalism, integrity and respect for diversity.</p><br><p><br>Duties<br>- Be fully informed about community structures and the protection and security situation of the PoC and develop strong links with a cross-section of members of refugee/IDP/stateless communities, using an AGD approach.<br>- Through relationships with PoC and network of partners stay abreast of political, social, economic and cultural developments that have an impact on the protection environment and provide advice to senior management.<br>- Ensure that the perspectives, capacities, needs and resources of the PoC are reflected in the protection strategy, planning processes and operations plan addressing the specific protection needs of women and men, children, youth and older persons, persons with disabilities, and marginalized groups.<br>- Support a consultative process with government counterparts at local levels, partners and PoC to develop and implement integrated strategies that address the key protection priorities, including, for example, child protection, education and GBV, and solutions approaches.<br>- Provide technical guidance and support to UNHCR and partners and implement and oversee Standard Operating Procedures (SOPs) on all community-based protection related issues.<br>- Support the design, implementation and evaluation of protection centred and solutions oriented programming with implementing and operational partners guaranteeing that community-owned activities are integrated.<br>- Support communities in establishing representation and coordination structures<br>- Promote confidence building and conflict resolution among PoC, authorities and host communities.<br>- Maintain protection presence through regular field missions and reports, making direct contact with PoC, host communities, local authorities and partners. In operations applying the humanitarian cluster system, contribute the development of an AGD-compliant strategy on which the response of the Protection Cluster is grounded and covers all assessed and prioritized protection needs of the affected populations.<br>- Support the Operation's work to fully integrate the protection strategy into the Country Operations Plan, the UN Development and Assistance Framework (UNDAF), the Humanitarian Country Team's common humanitarian action plan where applicable.<br>- Contribute to the Protection team's information management component which: provides disaggregated data on PoC and their problems; researches, collects and disseminates relevant protection information and good practices to enhance protection delivery and provide technical advice if necessary.<br>- Support the inclusion of participatory, community-based protection and AGD approaches in strategies and plans in the Country Operation.<br>- Support community understanding of UNHCR's commitment to deliver on accountability and quality assurance in its response.<br>- Support PoC to develop structures that enhance their participation and protection.<br>- Contribute to the design of project submissions and the budget for endorsement by the supervisor.<br>- Intervene with authorities on community-based protection issues.<br>- Negotiate with local counterparts, partners and PoC.</p><br><p>-&nbsp;Support the identification and management of risks and seek to seize opportunities impacting objectives in the area of responsibility. Ensure decision making in risk based in the functional area of work. Raise risks, issues and concerns to a supervisor or to relevant functional colleague(s).<br>- Perform other related duties as required.<br>Minimum Qualifications</p><br><p>Years of Experience / Degree Level<br>For P1/NOA - 1 year relevant experience with Undergraduate degree; or no experience with Graduate degree; or no experience with Doctorate degree<br>Field(s) of Education<br>International Development, Cultural Studies, Human Rights,<br>International Social Work, Social Science, Political Science,<br>Anthropology, International Law</p><br><p>or other relevant field.</p><br><p><br>Certificates and/or Licenses<br>Not specified<br>Relevant Job Experience<br>Essential<br>Some professional working experience.in the areas of community services, social work (e.g., gender, GBV programs, women's empowerment and protection, work with refugees) or/and human rights or related tasks in government, NGO or international organisation.<br>Desirable<br>Proven communication skills, both oral and written. Demonstrated knowledge of community communication and engagement approaches. Understanding of and demonstrated competencies in forced displacement and protection, particularly GBV prevention and response, child protection, education, gender equality, and the application of the Age, Gender and Diversity Policy.<br>Functional Skills<br>PR-Refugee Protection Principles and Framework<br>IT-Computer Literacy<br>DM-Database Management<br>PR-Coordination in Forced Displacement situations<br>PR-Child Protection Prevention and Response Programming<br>PR-Gender Equality<br>PR-Age, Gender and Diversity (AGD)<br>PR-Gender Based Violence (GBV) prevention programming<br>PR-Gender Based Violence (GBV) response programming<br>(Functional Skills marked with an asterisk* are essential)<br>Language Requirements<br>For International Professional and Field Service jobs: Knowledge of English and UN working language of the duty station if not English.<br>For National Professional jobs: Knowledge of English and UN working language of the duty station if not English and local language.<br>For General Service jobs: Knowledge of English and/or UN working language of the duty station if not English.</p><br><p><br>All UNHCR workforce members must individually and collectively, contribute towards a working environment where each person feels safe, and empowered to perform their duties. This includes by demonstrating no tolerance for sexual exploitation and abuse, harassment including sexual harassment, sexism, gender inequality, discrimination and abuse of power.<br>As individuals and as managers, all must be proactive in preventing and responding to inappropriate conduct, support ongoing dialogue on these matters and speaking up and seeking guidance and support from relevant UNHCR resources when these issues arise.</p><br><p><br>This is a Standard Job Description for all UNHCR jobs with this job title and grade level. The Operational Context may contain additional essential and/or desirable qualifications relating to the specific operation and/or position. Any such requirements are incorporated by reference in this Job Description and will be considered for the screening, shortlisting and selection of candidates.</p><br><p><b>Desired Candidate Profile</b></p><br><br><br><br><br><br><br><br>a. Operational Context:<br>After more than three decades of political turmoil and armed conflict that profoundly affected its population, Iraq is gradually emerging into a period of relative stability. The country is making progress towards sustainable development, including efforts to resolve protracted displacement. Iraq continues to host significant numbers of refugees and asylum-seekers and pursues an inclusive policy that enables their access to national services. Despite these advances, substantial humanitarian and development needs persist.<br>As of the end of 2025, Iraq generously hosts more than 348,600 refugees and asylum-seekers, of whom 88 per cent are Syrian nationals. Approximately 80 per cent of this population resides in the Kurdistan Region of Iraq (KRI). While most refugees and asylum-seekers live in urban and peri-urban areas, around 30 per cent continue to reside in nine refugee camps nationwide. Iraq also continues to have large numbers of internally displaced people (IDPs), including some 102,000 IDPs who live in IDP camps. <br>In this evolving context, UNHCR in Iraq has transitioned from a humanitarian response to an approach that increasingly supports development-oriented solutions. UNHCR works closely with the Government of Iraq and partners to support refugees and asylum-seekers in accessing protection, public services such as education and healthcare, and economic opportunities, while also advancing durable solutions for both refugees and IDPs. <br>Accordingly, UNHCR’s Multi-Year Strategy (2025–2029) envisions that forcibly displaced populations in Iraq will have enhanced access to legal protection, inclusive and quality basic and protection services within national systems and improved economic opportunities.<br>b. Desired Candidate Profile:<br>- Strong interpersonal and communication skills are essential for this role, as the incumbent will be expected to build trust and maintain effective relationships with refugee communities, often in complex and sensitive environments.<br>- Demonstrated experience in engaging with a wide range of stakeholders, including humanitarian/development partners, government authorities, and community representatives is crucial to ensure coordinated and inclusive protection responses.<br>- The ability to monitor, assess, and interpret protection trends and risks is vital. The incumbent should be capable of synthesizing complex information and translating it into concise reports and actionable recommendations. A proactive approach to identifying protection gaps and proposing practical, context-appropriate solutions is key to success in this position.<br>- In addition, strong managerial competencies are required, particularly in leading teams, coordination of protection activities, and ensuring accountability. <br>- Experience in designing and delivering training or capacity-building initiatives for staff and partners is also highly desirable, as it contributes to strengthening the overall protection response and sustainability of interventions.<br>c. Instructions for applicants:<br>- When completing the application, candidates are required to list all of their language skills – including their mother tongue. The three broad levels are A1/A2 ("Basic User"), B1/B2 ("Independent User"), and C1/C2 ("Proficient User").<br>- Shortlisted candidates might be required to undergo a written test. <br>- Female candidates are strongly encouraged to apply.<br>Kurdish Language is required.<p><b>Functional Clearance</b></p><br><br><br><br><br><br><br><br>This position doesn't require a functional clearance<u><b><b>Required languages (expected Overall ability is at least B2 level)</b></b></u><br><br><br><br><br><br><br>English<p>,</p><br><p>,</p><br><u><b><b>Desired languages</b></b></u><br><br><br><br><br><br><br>Arabic<p>,</p><br>Kurdish<p>,</p><br><p><b>Additional Qualifications</b></p><br><br><br><br><br><br><br><br><p><i>Skills</i></p><br>DM-Database Management, IT-Computer Literacy, PR-Age, Gender and Diversity (AGD), PR-Child Protection Prevention and Response Programming, PR-Coordination in Forced Displacement situations, PR-Gender Based Violence (GBV) prevention programming, PR-Gender Based Violence (GBV) response programming, PR-Gender Equality, PR-Refugee Protection Principles and Framework<p><i>Education</i></p><br>Bachelor of Arts: Anthropology, Bachelor of Arts: Cultural Studies, Bachelor of Arts: Human Rights, Bachelor of Arts: International Development, Bachelor of Arts: International Law, Bachelor of Arts: International Social Work, Bachelor of Arts: Political Science, Bachelor of Arts: Social Science<p><i>Certifications</i></p><br><p><i>Work Experience</i></p><br><br><br><br><br><br><br><br><p><b>UNHCR Salary Calculator</b></p><br><br><br><br><br><br><br><br><p><span><span><span><span>https://icsc.un.org/Home/SalaryScales</span></span></span></span></p><br><p><b>Other information</b></p><br><br><br><br><br><br><br><br> </div>

<p>The IT Associate supports the bank's technology operations, systems, infrastructure, and information security to ensure reliable, secure, and efficient banking services. The role assists in maintain IT systems, resolving technical issues, implementing security controls, and ensuring compliance with bank's IT policies and regulatory requirements. May work in areas such as: Cards, System Administration, Network &amp; security Engineering, IT Governance, and IT Security &amp; Access Management.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in information Technology , Computre Science, Computer Engineering, Network Engineering, Cybersecurity, or a related field.</li><li>1-3 years of relevant IT experience.</li><li>Good analytical, troubleshooting, and problem-solving skills.</li><li>Good communication and teamwork skills.</li></ul>

<p>The ideal candidate should have proven experience with Diesel &amp; Gas Generators and Solar Power Systems. Key Responsibilities Develop new business opportunities and maintain strong client relationships. Promote products, prepare quotations, negotiate contracts, and achieve sales targets. Provide after-sales support and coordinate with internal teams.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in Electrical or Mechanical Engineering (preferred, not mandatory).</li><li>Minimum 5 years' experience in the Power Generation industry.</li><li>Strong knowledge of Diesel &amp; Gas Generators and Solar Power Systems.</li><li>Excellent English communication skills.</li><li>Experience with CRM, quotations, sales reporting, Microsoft Office, and market analysis.</li><li>Strong communication, negotiation, and customer relationship skills.</li></ul>

<p><h4>Aircraft Mechanic III - Crew Chief</h4> <p>Amentum is seeking an aircraft mechanic III - crew chief to provide aircraft maintenance support, management, and leadership of a T-6A opportunity in Martyr BG Ali Flaih Air Base, Iraq (Balad Air Base). The selected candidate shall possess versatile skills and abilities to perform a wide range of responsibilities. The selected candidate will exercise sound judgment in making decisions by understanding operational requirements, the available resources and options, and analyzing the impacts – both short term and long term. This person shall have working experience in all aspects of flightline, phase maintenance, and aircrew life support systems.</p> <h4>Knowledge & Skills</h4> <ul> <li>Experience providing on-the-job training (OJT) to technicians.</li> <li>Interface with operational customers to develop flying schedules and plan major maintenance events, complete daily and monthly operational reports, document inventory usage, and control workflow.</li> <li>Work with other A&P mechanics and technical representatives to troubleshoot, diagnose, and solve unusual and complex maintenance problems.</li> <li>Ability to apply logic and good judgment, understand technical order diagrams and procedures, and use test equipment for analysis of airframe, engine, flight control, pneumatic/hydraulic, fuel, electrical/electronic systems problems.</li> <li>Plan and schedule aircraft utilization and maintenance activity and coordinate performance with operational customers.</li> <li>Assist in maintaining accurate parts inventory.</li> <li>Supervise aircraft jacking, lifting, and towing operations.</li> <li>Supervise aircraft and component inspections.</li> <li>Interpret inspection findings and determine adequacy of corrective actions.</li> <li>Troubleshoot aircraft structures, systems, components, and related equipment.</li> <li>Review maintenance forms, aircraft records, automated maintenance data systems, and historical reports to ensure complete documentation.</li> <li>Ability to inspect and operate powered and nonpowered aerospace ground equipment.</li> <li>Perform quality verification inspections (QVI) as needed.</li> <li>Perform other qualified duties as assigned.</li> </ul> <h4>Experience & Education</h4> <ul> <li>Must have current Federal Aviation Administration (FAA) Airframe and Powerplant License (A&P).</li> <li>Minimum of ten (10) years working knowledge of aircraft maintenance operations on one or more of the T-6 Texan or similar fixed-wing aircraft is required.</li> <li>Must have aircraft maintenance and egress experience.</li> <li>Must have a broad working knowledge of aircraft maintenance, inspection techniques, FAA regulations, and Air Force technical publications.</li> <li>Demonstrated leadership ability combined with attention to detail.</li> <li>Must have knowledge of the scope and limitation of various categories of maintenance and their application.</li> <li>Must know theories and principles of engine operations; accessories and components; theory of flight; rigging of flight controls; electrical and electronic; pneumatic/hydraulic; and mechanical principles.</li> <li>Knowledge of sheet metal, properties of materials, fuels, and oils. Ability to read, interpret, and use manufacturers and aircraft maintenance manuals, service bulletins, blueprints, wiring/schematic diagrams, data tables, and other specifications to determine feasibility and method to repair or replace malfunctioning or damaged components.</li> <li>Must have a working knowledge of aircraft safety requirements.</li> <li>Ability to work in a fast-paced environment that requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules.</li> </ul></p><p></p>

<p>We are seeking an experienced and technically strong Senior Electrical Project Manager with a solid EPC-oriented profile and proven experience in Data Center projects.</p><p>The ideal candidate must combine strong electrical engineering expertise with hands-on project management capability, taking ownership of projects from engineering coordination and procurement through execution, testing &amp; commissioning, and final handover.</p><p><b><br></b></p><p><b>Key Responsibilities</b></p><ul><li>Lead and manage the complete electrical scope of Data Center projects from engineering and procurement through construction, testing, commissioning, and handover.</li><li>Manage and coordinate electrical engineering requirements, ensuring designs and technical solutions are practical, coordinated, compliant, and suitable for execution.</li><li>Provide strong technical oversight of critical electrical systems including MV/LV distribution, transformers, generators, UPS systems, ATS, switchgear, PDUs, busways, earthing and lightning protection, and associated Data Center power infrastructure.</li><li>Review and coordinate electrical, MEP, architectural, ICT/ELV, and specialist systems, resolving technical interfaces and discrepancies before they affect execution.</li><li>Manage the engineering-to-procurement interface, including BOQs, technical specifications, equipment requirements, scopes of work, technical evaluations, material submittals, and procurement follow-up.</li><li>Technically evaluate vendors, equipment, suppliers, and subcontractors and ensure compliance with project requirements and specifications.</li><li>Monitor critical and long-lead equipment procurement, manufacturing, approvals, delivery, and installation in line with the project programme.</li><li>Lead site execution, subcontractors, resources, quality, progress, inspections, and technical coordination.</li><li>Manage electrical testing and commissioning activities, system integration, and readiness for final Data Center handover.</li><li>Coordinate effectively with clients, consultants, vendors, subcontractors, specialist contractors, and internal project teams.</li><li>Take ownership of technical and project-related issues, identify risks early, and provide practical solutions to maintain quality, programme, and project objectives.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor s Degree in Electrical Engineering.</li><li>Proven experience in Data Center projects is essential.</li><li>Strong hands-on technical experience in electrical power systems and critical electrical infrastructure.</li><li>Proven ability to independently manage electrical projects from engineering and procurement through execution, testing &amp; commissioning, and final handover.</li><li>Strong technical capability in reviewing and coordinating electrical and multidisciplinary engineering packages, resolving discrepancies and interfaces, and translating engineering requirements into accurate site execution.</li><li>Demonstrated proficiency in BOQs, technical specifications, procurement, subcontracting, construction methodology, and project sequencing.</li><li>Strong experience in managing vendors, specialist subcontractors, equipment packages, technical submittmits, and procurement activities.</li><li>Strong project management, planning, site management, coordination, problem-solving, and decision-making capabilities.</li><li>Strong command of testing &amp; commissioning, system integration, redundancy, reliability, and critical power requirements associated with Data Center projects.</li></ul><p>Preferred Qualifications / Additional Advantages</p><ul><li>Experience in developing and/or reviewing scalable, resilient, and redundant electrical topologies for megawatt-scale Data Center facilities.</li><li>Strong familiarity with relevant Data Center standards and guidelines, including IEEE, BICSI, and Uptime Institute requirements.</li><li>Direct experience with Uptime Institute Tier III and/or Tier IV topology, redundancy concepts, and implementation requirements will be considered a strong advantage.</li><li>Practical experience in applying PMI project management methodologies and best practices will be considered an advantage.</li><li>Strong working knowledge of Primavera P6 for planning, scheduling, and progress monitoring will be considered an advantage.</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Wood is currently recruiting for a Project Manager to join its Iraq business unit focusing on creating delivery excellence across assigned project, provide certainty and confidence to the customer robust control of project scope, schedule, cost and risk. This is a full-time onsite position in Basra, Iraq, on 28*28 rotation, with travel requirement.</p><p>The role</p><p>This is an exciting opportunity for an experienced Project Manager to join our Iraq Business Unit.</p><p>Our Clients and Projects</p><p>Designing the future. Transforming the world. Wood is an integral part of operations in Iraq, and we are continuing to grow our footprint across the country. With a 90-year heritage, 10 major contracts and over 850 employees, we have the skills, expertise and asset knowledge to support clients to deliver energy security and decarbonisation ambitions. Wood excels in supporting our clients to deliver complex upstream and midstream oil and gas projects in Iraq delivering maintenance, modifications and engineering solutions. We are committed to decarbonising existing assets, producing cleaner energy and developing a sustainable national workforce, ensuring the long-term growth of the region.</p><p>What we can offer</p><ul><li>Meaningful and interesting projects</li><li>Delivered to high profile clients and complex projects in Iraq</li><li>Commitment to Diversity and Inclusion ; we are an organisation actively committed to diversity and inclusion across our business with employee networks committed to giving all employees a voice</li><li>Competitive salary with regular salary reviews to ensure we are rewarding at the right level in line with the market</li><li>Medical Insurance: Ensures inpatient and outpatient medical care is available should you require treatment.</li><li>Commitment to continued professional development; development plans that are tailored to your individual needs and interests</li><li>Global connections : join experts around the world who are at the leading edge of our industry, shaping the standards of our profession</li></ul><p>Job Objectives:</p><p>Create delivery excellence across assigned project, provide certainty and confidence to the customer robust control of project scope, schedule, cost and risk.</p><p>Specifies and coordinates the implementation and completion of the project. This includes responsibility for safe delivery, ensuring that quality, schedule, and cost targets are met and for managing the associated risk.</p><p>Responsible for delivery of project to agreed specifications, for managing change and customer relationships, and ensuring appropriate reporting and governance is adhered to and controlled.</p><p>Key Accountabilities and Responsibilities:</p><p>Project Execution</p><ul><li>Contributes to and reviews the project proposal and plan to determine timeframe, procedures for accomplishing the project, staffing requirements, and allotment of available resources to various phases of the project.</li><li>Contributes to setting project evaluation parameters.</li><li>Negotiates changes to project scope or specification with the customer.</li><li>Follows Change Management process to identify and approve modifications to scope, cost, schedule and quality.</li><li>Pursue and develop opportunities for innovation, such as digitalisation and technology use, work share and high value engineering centres, to bring value to Wood and customer</li><li>Establishes project procedures and leads production of project execution plan including the scope of work, deliverables list, master schedule, budget, org charts, risk register etc</li><li>Regularly reports project progress to senior management and/or the customer.</li><li>Reponsible for delivery of agreed schedule and financial performance, proactively intervening to avoid slippage</li><li>Ensures competence of project team members to carry out assigned work</li><li>Leads ongoing focus on risk identification and mitigation during project execution</li><li>Responsible for the project HSSE leadership, ensures a program of initiatives and auditing schedule are established and that HSSE and quality management issues are proactively addressed</li><li>Guides and directs a multidiscipline project team, which may include external specialists and involve staff from multiple offices and sites</li><li>Responsible for ensuring project team members are competent to carry out assigned duties</li><li>Promotes and sets up performance improvement culture and actions on complex projects and into their supply chains.</li><li>Facilitates the set up of information management systems / applications as applicable to suit various life phases of projects and manage information management project team</li><li>Participate in assurance activities and peer reviews</li></ul><p>Leadership</p><ul><li>Is a champion and role model for ethical behaviour and compliance with applicable laws and policies.</li><li>Oversees proposals and call-offs (may be individual projects) within delegation of authority, ensuring compliance with contracting policy and standards of ethical conduct.</li><li>Coaches, mentors and empowers others to make decisions within established parameters</li></ul><p>Working Relationships:</p><p>Internal:</p><ul><li>Provides the interface and maintains effective relationships with other contributors to the project.</li><li>Guides and directs project team and functional support teams as required</li><li>Interfaces with high value engineering centres (HVEC) as required and manages scope across all offices involved</li><li>Interface and coordinate with Operational and/or Contract Management to ensure delivery of operational goals</li></ul><p>External:</p><ul><li>Primary point of contact for customer on assigned scope.</li><li>Establishes and maintains a positive and effective customer relationship, ensuring payment terms are met, and communicating any delays</li><li>Manage relationships with external suppliers and sub-contractors and resolves cost, schedule and quality issues</li><li>Seeks out new avenues for building internal and external relationships</li><li>Monitors existing relationships</li><li>May act as company representative and play a role in contract negotiations,</li><li>Influences relationships at higher customer level</li></ul><p>Level of Influence and Decision-Making Authority:</p><ul><li>Actions and decisions typically have a significant influence on the technical, operational and financial results of one or more small and medium-size projects</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>University degree in relevant discipline</li><li>Project Management Professional (PMP), Associate in Project Management (APM) or equivalent certification is preferred</li><li>Minimum of 15 years experience in the Oil and Gas Industry</li><li>Proven project management experience as well as a good understanding of business issues.</li><li>Good understanding of technical work scopes and commercial aspects of projects required.</li><li>Iraq or Middle East experience preferred but not essential.</li><li>Good stakeholder management and able to coach and advise others in this area.</li></ul><p>Personal Attributes:</p><ul><li>Safety focused with an uncompromising approach to risk management.</li><li>Places the welfare of both internal and customer employees at the top of the agenda.</li><li>Passionately and visibly pursues, supports, demonstrates, and embeds company values.</li><li>A motivated self-starter, who can self-direct when required, able to use own initiative to make appropriate decisions but also know when escalation is required.</li><li>Able to make decisions, lead execution, take initiative and seek out improvements</li><li>Committed to drive projects to completion, taking ownership for all that occurs within it.</li><li>Strong Team Builder- able to motivate, engage and influence a diverse group of people.</li><li>Able to adapt to changing priorities.</li><li>Strong planning, organising and execution skills.</li><li>Good communicator both verbally and in written form.</li><li>Customer focused develops sincere and open relationships with customers.</li></ul><p></p></section>

<p>The UH-60 Aircraft Mechanic AM-II performs the full range of military tactical aircraft maintenance and maintains repairs and troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems. Remove and install aircraft subsystem assemblies and components such as engines, rotors, transmissions, mechanical flight controls and their components. Service and lubricate aircraft and subsystems. Safely prepare aircraft for inspections and maintenance checks and services. Perform scheduled inspections and assist in performing special inspections. Perform limited maintenance operational checks and diagnoses and troubleshoots aircraft systems using special tools and test equipment as required. Use and perform operator maintenance on tools, special tools and aircraft ground support equipment. Apply comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as aircraft Technical Manuals, Maintenance Information and Action Messages and all technical guidance provided through government official representatives. Maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components. Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and use required expertise in restoring equipment condition and or operation. Participate in maintenance test flights and operation checks as required. Perform other duties as requested.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>High school diploma or equivalent required.</li><li>Three (3) or more years aviation maintenance experience within the past five (5) years on the (MDS) -UH60. OR FAA A&amp;P license AND Two (2) years of aviation maintenance experience within the past Five (5) years on the (MDS)- UH60.</li><li>U.S. military technical school or specialized training course is desired, certification of education level is required.</li><li>Must be in possession of a Valid U.S. Passport valid for 2 years at the time of hiring and be able to travel internationally.</li><li>Must be able to obtain and maintain facility Public Trust NAC-I. "Note: US Citizenship is required for facility Public Trust NAC-I at this work location".</li><li>Must be able to clear CENTCOM MOD Physicals requirements for deployment training (Will be required to attend CRC (DIDC).</li><li>Must be able to obtain Iraq Visa.</li><li>Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts.</li><li>Broad knowledge of aircraft sheet metal/structural modifications and repair.</li><li>Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers.</li><li>Working knowledge of technical publications and Logistics Information Systems.</li><li>Able to prioritize workloads to maintain schedules on assigned projects and may be required to lead teams through more complex aircraft relevant tasks.</li><li>Participate in maintenance test flights and operation checks as required.</li><li>Possess the level of experience to inspect all required aeronautical type maintenance to be performed by Mechanics.</li><li>The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.</li><li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li><li>Must be able to climb stairs, ramps, ladders, and work stands.</li><li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li><li>May be required to lift heavy objects whose weight may exceed 50 pounds.</li><li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li><li>Will handle dirty parts and lubricants.</li><li>Will be required to wear proper Personal Protective Equipment (PPE).</li><li>Must be able to pass a Respirator Physical and Fit Test</li><li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</li><li>Must be able to lift/push/pull minimum of 50 pounds.</li><li>May work in maintenance shop or outside.</li><li>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</li><li>May be exposed to extreme noise from operating equipment.</li><li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li><li>May be expected to work in austere environments and all-weather conditions.</li></ul>

<p>The UH-60 Aircraft Mechanic AM-II performs the full range of military tactical aircraft maintenance and maintains repairs and troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems.</p><p>• Remove and install aircraft subsystem assemblies and components such as engines, rotors, transmissions, mechanical flight controls and their components.</p><p>• Service and lubricate aircraft and subsystems.</p><p>• Safely prepare aircraft for inspections and maintenance checks and services.</p><p>• Perform scheduled inspections and assist in performing special inspections.</p><p>• Perform limited maintenance operational checks and diagnoses and troubleshoots aircraft systems using special tools and test equipment as required.</p><p>• Use and perform operator maintenance on tools, special tools and aircraft ground support equipment.</p><p>• Apply comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as aircraft Technical Manuals, Maintenance Information and Action Messages and all technical guidance provided through government official representatives.</p><p>• Maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components.</p><p>• Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and use required expertise in restoring equipment condition and or operation.</p><p>• Participate in maintenance test flights and operation checks as required.</p><p>• Perform other duties as requested.</p><p><strong>Knowledge &amp; Skills</strong></p><p>• Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts.</p><p>• Broad knowledge of aircraft sheet metal/structural modifications and repair.</p><p>• Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers.</p><p>• Working knowledge of technical publications and Logistics Information Systems.</p><p>• Able to prioritize workloads to maintain schedules on assigned projects and may be required to lead teams through more complex aircraft relevant tasks.</p><p>• Participate in maintenance test flights and operation checks as required.</p><p>• Possess the level of experience to inspect all required aeronautical type maintenance to be performed by Mechanics.</p><p>• The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.</p><p><strong>Physical Requirements/Working Environment</strong></p><p>• Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</p><p>• Must be able to climb stairs, ramps, ladders, and work stands.</p><p>• Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</p><p>• May be required to lift heavy objects whose weight may exceed 50 pounds.</p><p>• Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</p><p>• Will handle dirty parts and lubricants.</p><p>• Will be required to wear proper Personal Protective Equipment (PPE).</p><p>• Must be able to pass a Respirator Physical and Fit Test</p><p>• May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</p><p>• Must be able to lift/push/pull minimum of 50 pounds.</p><p>• May work in maintenance shop or outside.</p><p>• Must be able to work in a shop where the environment is drafty, noisy, and dirty.</p><p>• May be exposed to extreme noise from operating equipment.</p><p>• May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</p><p>• May be expected to work in austere environments and all-weather conditions.</p><p><strong>Desired Candidate Profile</strong></p><p>Minimum Requirements:</p><ul><li>High school diploma or equivalent required.</li><li>Three (3) or more years aviation maintenance experience within the past five (5) years on the (MDS) -UH60.</li><li>OR FAA A&amp;P license AND Two (2) years of aviation maintenance experience within the past Five (5) years on the (MDS)- UH60.</li><li>U.S. military technical school or specialized training course is desired, certification of education level is required.</li><li>Must be in possession of a Valid U.S. Passport valid for 2 years at the time of hiring and be able to travel internationally.</li><li>Must be able to obtain and maintain facility Public Trust NAC-I. "Note: US Citizenship is required for facility Public Trust NAC-I at this work location".</li><li>Must be able to clear CENTCOM MOD Physicals requirements for deployment training (Will be required to attend CRC (DIDC).</li><li>Must be able to obtain Iraq Visa.</li></ul>

<p><h4>Job Description</h4> <p>The UH-60 Aircraft Mechanic AM-II performs the full range of military tactical aircraft maintenance and maintains, repairs, and troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneuhydraulic, engines, auxiliary power unit, and ventilation and heating systems.</p> <p>Remove and install aircraft subsystem assemblies and components such as engines, rotors, transmissions, mechanical flight controls and their components.</p> <p>Service and lubricate aircraft and subsystems.</p> <p>Safely prepare aircraft for inspections and maintenance checks and services.</p> <p>Perform scheduled inspections and assist in performing special inspections.</p> <p>Perform limited maintenance operational checks and diagnose and troubleshoot aircraft systems using special tools and test equipment as required.</p> <p>Use and perform operator maintenance on tools, special tools, and aircraft ground support equipment.</p> <p>Apply comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as aircraft technical manuals, maintenance information and action messages, and all technical guidance provided through government official representatives.</p> <p>Maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components.</p> <p>Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and use required expertise in restoring equipment condition and/or operation.</p> <p>Participate in maintenance test flights and operation checks as required.</p> <p>Perform other duties as requested.</p> <h4>Minimum Requirements</h4> <ul> <li>High school diploma or equivalent required.</li> <li>Three (3) or more years aviation maintenance experience within the past five (5) years on the (MDS)-UH60.</li> <li>OR FAA A&P license AND two (2) years of aviation maintenance experience within the past five (5) years on the (MDS)-UH60.</li> <li>U.S. military technical school or specialized training course is desired; certification of education level is required.</li> <li>Must be in possession of a valid U.S. passport valid for 2 years at the time of hiring and be able to travel internationally.</li> <li>Must be able to obtain and maintain facility Public Trust NAC-I. Note: US citizenship is required for facility Public Trust NAC-I at this work location.</li> <li>Must be able to clear CENTCOM MOD physical requirements for deployment training (will be required to attend CRC (DIDC)).</li> <li>Must be able to obtain Iraq visa.</li> </ul> <h4>Knowledge & Skills</h4> <ul> <li>Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures, and replacement of parts.</li> <li>Broad knowledge of aircraft sheet metal/structural modifications and repair.</li> <li>Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes, and shears.</li> <li>Working knowledge of technical publications and logistics information systems.</li> <li>Able to prioritize workloads to maintain schedules on assigned projects and may be required to lead teams through more complex aircraft relevant tasks.</li> <li>Participate in maintenance test flights and operation checks as required.</li> <li>Possess the level of experience to inspect all required aeronautical type maintenance to be performed by mechanics.</li> <li>The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.</li> </ul> <h4>Physical Requirements / Working Environment</h4> <ul> <li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li> <li>Must be able to climb stairs, ramps, ladders, and work stands.</li> <li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li> <li>May be required to lift heavy objects whose weight may exceed 50 pounds.</li> <li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li> <li>Will handle dirty parts and lubricants.</li> <li>Will be required to wear proper personal protective equipment (PPE).</li> <li>Must be able to pass a respirator physical and fit test.</li> <li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</li> <li>Must be able to lift/push/pull minimum of 50 pounds.</li> <li>May work in maintenance shop or outside.</li> <li>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</li> <li>May be exposed to extreme noise from operating equipment.</li> <li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li> <li>May be expected to work in austere environments and all-weather conditions.</li> </ul></p><p></p>

<p>The UH-60 Aircraft Mechanic AM-II performs the full range of military tactical aircraft maintenance and maintains repairs and troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems. Remove and install aircraft subsystem assemblies and components such as engines, rotors, transmissions, mechanical flight controls and their components. Service and lubricate aircraft and subsystems. Safely prepare aircraft for inspections and maintenance checks and services. Perform scheduled inspections and assist in performing special inspections. Perform limited maintenance operational checks and diagnoses and troubleshoots aircraft systems using special tools and test equipment as required. Use and perform operator maintenance on tools, special tools and aircraft ground support equipment. Apply comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as aircraft Technical Manuals, Maintenance Information and Action Messages and all technical guidance provided through government official representatives. Maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components. Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and use required expertise in restoring equipment condition and or operation. Participate in maintenance test flights and operation checks as required. Perform other duties as requested.</p><p>Knowledge &amp; Skills Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts. Broad knowledge of aircraft sheet metal/structural modifications and repair. Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. Working knowledge of technical publications and Logistics Information Systems. Able to prioritize workloads to maintain schedules on assigned projects and may be required to lead teams through more complex aircraft relevant tasks. Participate in maintenance test flights and operation checks as required. Possess the level of experience to inspect all required aeronautical type maintenance to be performed by Mechanics. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.</p><p>Physical Requirements/Working Environment Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day. Must be able to climb stairs, ramps, ladders, and work stands. Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders. May be required to lift heavy objects whose weight may exceed 50 pounds. Must be able to type using a standard keyboard to communicate through e-mail and various software applications. Will handle dirty parts and lubricants. Will be required to wear proper Personal Protective Equipment (PPE). Must be able to pass a Respirator Physical and Fit Test May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc. Must be able to lift/push/pull minimum of 50 pounds. May work in maintenance shop or outside. Must be able to work in a shop where the environment is drafty, noisy, and dirty. May be exposed to extreme noise from operating equipment. May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles. May be expected to work in austere environments and all-weather conditions.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>High school diploma or equivalent required.</li><li>Three (3) or more years aviation maintenance experience within the past five (5) years on the (MDS) -UH60. OR FAA A&amp;P license AND Two (2) years of aviation maintenance experience within the past Five (5) years on the (MDS)- UH60.</li><li>U.S. military technical school or specialized training course is desired, certification of education level is required.</li><li>Must be in possession of a Valid U.S. Passport valid for 2 years at the time of hiring and be able to travel internationally.</li><li>Must be able to obtain and maintain facility Public Trust NAC-I. "Note: US Citizenship is required for facility Public Trust NAC-I at this work location".</li><li>Must be able to clear CENTCOM MOD Physicals requirements for deployment training (Will be required to attend CRC (DIDC).</li><li>Must be able to obtain Iraq Visa.</li></ul>

<p>The successful candidate will be responsible for supporting electrical operations, maintenance, troubleshooting, and field activities while ensuring compliance with safety standards.</p><p><strong>Desired Candidate Profile</strong></p><p>Bachelor s Degree in Electrical Engineering with a minimum of 2 years of relevant experience; or Technical Diploma in Electrical Engineering with 3 4 years of relevant experience Proven hands-on experience in electrical systems, equipment, and maintenance Strong ability to diagnose, troubleshoot, and resolve electrical faults Experience conducting fieldwork and working directly with electrical systems and equipment Good knowledge of electrical safety standards, procedures, and best practices Strong analytical, problem-solving, and communication skills Willingness and ability to relocate to Najaf, Iraq is essential</p>

<p>Develop and implement the Quality policies, procedures, and standards. Ensure compliance with local requirements and international quality standards. Monitor Service and operational quality and key performance indicators. Lead internal quality reviews and continuous improvement initiatives. Prepare quality reports and recommend corrective actions. Promote a strong quality culture across the organization. Monitor customer and employee satisfaction. Support the implementation of ISO standards and quality management systems.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in business administration, Industrial Engineering, or a related filed.</li><li>5-10 years of experience in quality management.</li><li>Strong knowledge of ISO standards, Internal audits, and quality management systems.</li><li>Knowledge of continuous improvement tools such as Six Sigma and Kaizen.</li></ul>

<p><h4>Professional summary</h4> <p>Experienced cyber security manager with over 10 years of expertise in the oil and gas industry, including hands-on oil field operations and deployment of Chinese technology solutions. Proven track record of securing complex industrial environments, leading cross-functional teams, and ensuring regulatory compliance. Adept at risk assessment, incident response, and implementation of robust security protocols in challenging operational settings.</p> <h4>Key skills</h4> <ul> <li>Cyber security strategy & management</li> <li>Oil & gas industry operations</li> <li>Oil field security solutions</li> <li>Chinese technology integration & compliance</li> <li>Industrial control systems (ICS) security</li> <li>SCADA systems protection</li> <li>Risk assessment & mitigation</li> <li>Incident response & forensics</li> <li>Regulatory compliance (NIST, ISO, IEC)</li> <li>Team leadership & training</li> <li>Vendor management and liaison</li> <li>Network & endpoint security</li> <li>Cloud security (if applicable)</li> </ul> <h4>Responsibilities</h4> <ul> <li>Lead cyber security operations for oil and gas facilities, including remote oil fields and refineries.</li> <li>Develop and implement security policies tailored to industrial environments and field operations.</li> <li>Oversee the integration and secure deployment of Chinese technology solutions (e.g., Huawei, Hikvision) within operational networks.</li> <li>Conduct risk assessments for both IT and OT environments, identifying vulnerabilities specific to oil field equipment and Chinese tech interfaces.</li> <li>Coordinate incident response plans and forensic investigations for security breaches in field sites.</li> <li>Manage compliance with international standards (NIST, ISO, IEC) and local regulatory requirements.</li> <li>Train and mentor cross-functional teams on cyber security awareness and best practices.</li> <li>Collaborate with vendors and technology partners, including Chinese tech providers, to ensure secure implementation and ongoing maintenance.</li> <li>Awareness “WeChat” – Chinese WhatsApp</li> <li>Cyber-attack methodology – keylogging, backdoor, Trojan attacks etc., including mitigation planning</li> <li>Data loss prevention (DLP)</li> <li>Application attack and defense</li> <li>General risk planning and mitigation</li> <li>Cyber review planning and mitigation</li> <li>Business continuity protection and modeling</li> <li>Liaise with consultant cyber security team</li> </ul> <h4>Education</h4> <p>Degree in Cyber Security / Information Technology / Computer Science</p> <p>Certifications: CISSP, CISM, GICSP, CEH, or relevant oil & gas and Chinese technology certifications</p> <h4>Professional development</h4> <ul> <li>Advanced training in oil & gas cyber security</li> <li>Workshops on Chinese technology integration & security</li> <li>Continuous education in industrial control systems protection</li> </ul> <h4>Languages</h4> <p>English (fluent)<br>Arabic (ideal)</p></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Job Description</p><p>Wood is currently recruiting for a Lead Planner/Cost Subject Matter Expert (SME) to join its Iraq business unit ensuring coordination with relevant sections to formulate mitigation measures and ensuring budget compliance.</p><p>&nbsp;</p><p><br></p><p>This is a full-time onsite position in Basra, Iraq on 28*28 rotation.&nbsp;</p><p><br></p><p>Responsibilities</p><p>Remarkable people, trusted by clients to design and advance the world.</p><p><br></p><p>Wood is currently recruiting for a Lead Planner/Cost Subject Matter Expert (SME) to join its Iraq business unit ensuring coordination with relevant sections to formulate mitigation measures and ensuring budget compliance.</p><p>This is a full-time onsite position in Basra, Iraq on 28*28 rotation.&nbsp;</p><p><br></p><p>#Wood #Iraq #Basra #Lead Planner/Cost Subject Matter Expert&nbsp;</p><p><br></p><p>&nbsp;</p><p><br></p><p>The role</p><p><br></p><p>This is an exciting opportunity for an experienced Lead Planner/Cost Subject Matter Expert (SME) to join our Iraq Business Unit.</p><p><br></p><p>Our Clients and Projects&nbsp;</p><p><br></p><p>Designing the future. Transforming the world.&nbsp;</p><p><br></p><p>Wood is an integral part of operations in Iraq, and we are continuing to grow our footprint across the country. With a 90-year heritage, 10 major contracts and over 850 employees, we have the skills, expertise and asset knowledge to support clients to deliver energy security and decarbonisation ambitions.&nbsp;</p><p><br></p><p>Wood excels in supporting our clients to deliver complex upstream and midstream oil and gas projects in Iraq delivering maintenance, modifications and engineering solutions. We are committed to decarbonising existing assets, producing cleaner energy and developing a sustainable national workforce, ensuring the long-term growth of the region.</p><p><br></p><p>&nbsp;</p><p><br></p><p>What we can offer</p><p><br></p><p>Meaningful and interesting projects Delivered to high profile clients and complex projects in Iraq&nbsp;</p><p>Commitment to Diversity and Inclusion; we are an organisation actively committed to diversity and inclusion across our business with employee networks committed to giving all employees a voice&nbsp;</p><p>Competitive salary with regular salary reviews to ensure we are rewarding at the right level in line with the market&nbsp;</p><p>Medical Insurance: Ensures inpatient and outpatient medical care is available should you require treatment.&nbsp;</p><p>Commitment to continued professional development; development plans that are tailored to your individual needs and interests&nbsp;</p><p>Global connections: join experts around the world who are at the leading edge of our industry, shaping the standards of our profession&nbsp;</p><p>Key Responsibilities:</p><p><br></p><p>ST Department Budget Execution Tracking: Track the ST department’s annual budget execution, identify budget deviations, coordinate with relevant sections to formulate mitigation measures, and ensure budget compliance.</p><p>Annual Budget Preparation: In charge of the ST department’s annual budget preparation, based on the department’s annual objectives and project plans, to ensure the budget is scientific, reasonable and in line with actual needs.</p><p>Purchase Order &amp; Budget Monitoring: Monitor the ST department’s PO execution and budget implementation, summarize relevant data, and submit monthly reports.</p><p>Key Project Cost Review: Review the investment estimates of key projects completed by contractors to prevent cost overruns.</p><p>Contract &amp; Tendering Management: Organize the ST department’s contract tendering, prepare relevant tendering documents (TC papers) in accordance with established tender procedure and ensure compliance.</p><p>Other Duties: Complete daily operations and other temporary tasks assigned by department.</p><p>Qualifications</p><p>What makes you remarkable?&nbsp;</p><p><br></p><p>At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world’s most critical challenges.&nbsp;&nbsp;</p><p><br></p><p>Expected:</p><p><br></p><p>Bachelor’s degree in engineering or project management</p><p>15+ years of experience in planning &amp; cost control (oil &amp; gas). including no less than 5 years of overseas project work experience; prior experience in Middle East oilfield or energy projects is highly preferred.</p><p>Proficient in Primavera P6 and standard cost management tools; thorough understanding of international project contracts and energy project management standards.</p><p>Familiar with EPC execution and cost management process</p><p>PMP or equivalent project management/cost control certification is preferred.</p><p>Skills:</p><p><br></p><p>Experience in project planning and execution</p><p>Professional cost control, budgeting and forecasting</p><p>Good understanding of cost estimating principles (preferred)</p><p>Strong knowledge of oil and production facilities</p><p>Excellent analytical and report writing skills</p><p>Good organizational, planning and interface coordination skills</p><p>Professional English communication skills</p><p>Strong team leadership and coordination abilities</p><p>Ability to work under pressure and meet tight deadlines</p><p><br></p><p>Systems:</p><p><br></p><p>Primavera P6, Microsoft Project</p><p>&nbsp;Advanced Excel (Pivot, VLOOKUP, etc.)</p><p>Document management system</p><p>ERP / cost control system</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><br></li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Artificial Lift Systems (ALS) Field Specialist</b></p><br><p><b>Would you like the opportunity to work for oilfield Services Company?</b></p><br><p><b>Do you like working in collaborative teams and solving technical problems?</b><br>&nbsp;</p><br><p><b>Be part of our Artificial Lift team!</b></p><br><p>As an Artificial Lift Systems – Field Specialist you will be executing the operations of ESP equipment and surface equipment in the field, complying with all the integrity/quality and safety standards, as well as compliance with the regulations of the different clients in all fields.<br>&nbsp;</p><br><p><b>Partner with the best</b></p><br><p>As an Artificial Lift Systems (ALS) Field Specialist, you'll participate in all technical events, including supporting the BH contract engineering team.<br>&nbsp;</p><br><p><b>As an Artificial Lift Systems (ALS) Field Specialist, you will be responsible for:</b></p><br><ul><li>Installing, running of ESP Equipment including inspecting, modifying and repair of pumps, motors, cables and relevant down hole equipment at Contractor’s base, making connections at surface and operating the ESP equipment to the satisfaction of the Company.</li><li>Carrying out all pre-commissioning checks and tests to ensure successful start-up and continuous operation of ESP Equipment.</li><li>Prevising of expertise for trouble shooting, safety precautions and related matters.</li><li>Repairing of any breakdown and maintenance of the ESP Equipment.</li><li>Leads a team, attends pre job planning meetings, prepares for and supervises the technical service</li><li>Installing, operating and maintaining of VSD system.</li></ul><p>​</p><br><p><b>Fuel your passion</b></p><br><p><b>To be successful in this role you will:</b></p><br><ul><li>Have 5 years of experience in ESP</li><li>Have a Technical related Degree (Diploma or higher) &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;</li><li>Have experience in installing, operating and maintaining of VSD&nbsp;system&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;</li><li>&nbsp;Have experience in performing downhole and troubleshooting of ESP System in the field</li><li>Have to be flexible to work on rotational basis.&nbsp;&nbsp;</li><li>Have an industry experience and product line training required in ESP.</li><li>Have experience performing downhole and troubleshooting of ESP System in the field.</li></ul><p><br><b>Work in a way that works for you</b></p><br><p>We recognize that everyone is different and that the way in which people want to work and deliver at their best is different for everyone.</p><br><ul><li>This role is a shift based working pattern. Please talk to us about the specific working patterns available when you apply</li></ul><p><br><b>Working with us</b></p><br><p>Our people are at the heart of what we do at Baker Hughes. We know we are better when all of our people are developed, engaged and able to bring their whole authentic selves to work. We invest in the health and well-being of our workforce, train and reward talent and develop leaders at all levels to bring out the best in each other.<br>&nbsp;</p><br><p><b>Working for you</b></p><br><p>Our inventions have revolutionized energy for over a century. But to keep going forward tomorrow, we know we have to push the boundaries today. We prioritize rewarding those who embrace change with a package that reflects how much we value their input.&nbsp; Join us, and you can expect:</p><br><ul><li>Contemporary work-life balance policies and wellbeing activities</li><li>Comprehensive private medical care options</li><li>Safety net of life insurance and disability programs</li><li>Tailored financial programs</li><li>Additional elected or voluntary benefits</li></ul>The Baker Hughes internal title for this role is: FIELD SPEC III - ALS </div>

<p>The Regional Finance Officer (RFO) Middle East is responsible for supporting the sound financial management of HAMAP-Humanitaire s programmes and operations across Lebanon, Iraq and Syria. Under the supervision of the Regional Support Functions Manager Middle East, the RFO ensures effective budget monitoring and financial analysis across the regional portfolio, supports budgeting and forecasting processes, oversees the quality and timeliness of financial information, and helps ensure compliance with HAMAP-Humanitaire s internal policies, donor requirements and applicable financial procedures. The RFO works closely with programme and support teams to monitor expenditure against budgets, analyse variances and burn rates, anticipate financial risks and underspending or overspending, update forecasts, and support timely management decisions. The RFO provides direct supervision and technical support to designated country finance staff in the region. The position contributes to strengthening and harmonising financial systems, tools, procedures and controls across the three countries while ensuring that these remain adapted to operational realities and donor requirements. The position acts as a key link between country operations, regional management and HAMAP-Humanitaire HQ Finance on financial matters.</p><p>Hierarchical and organizational links: Reports to : Regional Support Manager Middle East Coordinates with: Budget holders and project teams, HQ Finance Department, HR, Procurement and Logistics staff.</p><p>Objective 1: Regional Financial Management and Oversight</p><p>To ensure effective financial management across HAMAP-Humanitaire s programmes in Lebanon, Iraq and Syria through robust budget monitoring, financial analysis, forecasting, budgeting and reporting, enabling timely identification of financial risks and supporting informed decision-making and effective use of project resources.</p><p>Objective 2: Financial Compliance, Controls and Systems Strengthening</p><p>To ensure accurate, compliant and consistent financial management across HAMAP-Humanitaire s operations in the region, in accordance with donor requirements and internal policies, through effective financial controls, oversight and risk management. Strengthen HAMAP-Humanitaire s regional finance function through the development and harmonisation of financial policies, procedures, systems and tools, alongside the supervision, technical guidance and capacity building of finance staff across Lebanon, Iraq and Syria.</p><p>Objective 3: Partner Financial Oversight and Capacity Strengthening</p><p>To ensure sound financial management and compliance of HAMAP-Humanitaire s local partners through effective financial monitoring, review of financial reporting and identification and follow-up of financial and compliance risks. Strengthen the organisational financial management systems and individual capacities of local partners through tailored capacity assessments, training, coaching, tools and ongoing technical support, promoting greater autonomy, accountability and sustainable financial management practices</p><p>Main responsibilities</p><p>Budget Management, Financial Monitoring and Forecasting</p><ul><li>Lead the regular financial monitoring of HAMAP-Humanitaire projects and operations across Lebanon, Iraq and Syria.</li><li>Prepare, consolidate and maintain Budget Follow-Up (BFU), Budget versus Actual (BvA) and other financial monitoring tools for all active projects in the region.</li><li>Analyse expenditure, variances, burn rates, commitments and projected costs, and identify risks of underspending, overspending, funding gaps or incorrect allocations.</li><li>Work closely with Programme Coordinators and budget holders to review expenditure, implementation plans and forecasts and recommend corrective actions where required.</li><li>Monitor shared costs, staff allocations and other cross-project expenditures to ensure appropriate allocation across projects and funding sources.</li><li>Support the development of project spending plans, cash forecasts and funding requests based on realistic operational projections.</li></ul><p>Budgeting, Reporting and Donor Compliance</p><ul><li>Lead or support the preparation of project budgets for proposals, amendments, extensions and budget revisions, in coordination with programme and support teams.</li><li>Ensure budgets are realistic, adequately costed and compliant with donor requirements and HAMAP-Humanitaire rules.</li><li>Support budget reallocations and revisions by analysing financial implications, remaining balances and donor flexibility.</li><li>Prepare, review and consolidate financial reports for donors and HQ, ensuring accuracy, completeness and timely submission</li><li>Ensure expenditure and financial documentation comply with donor requirements, approved budgets and HAMAP-Humanitaire policies, including cost eligibility, supporting documentation and correct allocation of expenditure.</li><li>Provide financial input throughout the project cycle, including proposal development, project kick-off, implementation and closure.</li></ul><p>Financial Control, Audit and Systems Strengthening</p><ul><li>Oversee the quality of financial records, accounting entries, reconciliations, supporting documentation and financial filing across the region.</li><li>Review financial transactions and allocations to identify errors, unsupported expenditure, control weaknesses or compliance risks and ensure timely corrective action.</li><li>Support internal and external audits, donor verifications and other financial reviews, including preparation of documentation and follow-up of findings.</li><li>Conduct periodic financial compliance reviews and support missions to country offices to assess the application of financial procedures and internal controls.</li><li>Contribute to the development, revision and harmonisation of finance policies, procedures, tools and internal controls across Lebanon, Iraq and Syria.</li><li>Support the implementation of improved financial systems and processes adapted to organisational, operational, legal and donor requirements.</li></ul><p>Local Partner Financial Management and Capacity Strengthening</p><ul><li>Review financial reports, expenditure records and supporting documentation submitted by HAMAP-Humanitaire s local partners to ensure accuracy, completeness and compliance with partnership agreements, approved budgets, donor requirements and HAMAP-Humanitaire procedures.</li><li>Monitor partner expenditure and budget implementation, identify financial or compliance issues, and follow up on required corrections and recommendations.</li><li><br></li></ul><ul><li><br></li></ul><p><strong>Desired Candidate Profile</strong></p><p><strong>Qualifications and Experience</strong></p><p>Education</p><ul><li>Bachelor s or Master s degree in Finance, Accounting, Business Administration, Economics, Management or another relevant field.</li><li>A professional qualification or certification in accounting, finance or audit would be an asset.</li></ul><p>Experience</p><ul><li>Minimum of five years of progressively responsible professional experience in finance, accounting, grants finance or financial management, preferably within an international NGO, humanitarian or development organisation.</li><li>Demonstrated experience in project budgeting, Budget versus Actual (BvA) analysis, financial monitoring, forecasting and financial reporting.</li><li>Experience managing the financial requirements of multiple projects and institutional donor funded programmes.</li><li>Experience with donor financial compliance, financial controls, audits and/or expenditure verifications.</li><li>Experience working with local partners, including reviewing partner financial reporting, monitoring financial compliance and/or strengthening partner financial management capacity, is highly desirable.</li><li>Experience setting-up an ERP system would be a strong asset.</li><li>Previous experience in a regional or multi-country role and/or working within the Middle East is an asset.</li><li>Experience contributing to the development or improvement of financial systems, policies, procedures and tools is an asset.</li></ul><p><strong>Required Skills</strong></p><p>Behavioral</p><ul><li>Demonstrates integrity, accountability and professionalism, taking responsibility for decisions and responding constructively to feedback.</li><li>Plans and prioritises work effectively, anticipates risks and takes initiative to achieve high-quality results within established deadlines.</li><li>Works collaboratively with colleagues, local partners and other stakeholders, contributing to a constructive and respectful working environment.</li><li>Communicates clearly and effectively and builds positive working relationships across different functions, cultures and operational contexts.</li><li>Promotes continuous learning, knowledge sharing and improvement, and supports the development and performance of others.</li><li>Demonstrates adaptability and sound judgement when working across multiple countries and in changing operational environments.</li><li>Promotes a working environment free from discrimination, harassment, retaliation, sexual exploitation and abuse, and upholds HAMAP-Humanitaire s safeguarding and PSEA principles.</li><li>Promotes inclusion and equal participation and considers gender and diversity perspectives in the performance of responsibilities.</li></ul><p>Technical</p><ul><li>Demonstrates strong knowledge of financial management, accounting principles, budgeting, forecasting, financial reporting and internal controls.</li><li>Ability to analyse complex financial information, identify trends, variances and financial risks, and provide practical recommendations to support decision-making.</li><li>Demonstrated understanding of institutional donor financial requirements, cost eligibility, supporting documentation and financial compliance.</li><li>Ability to manage and monitor the finances of multiple projects and funding sources across different countries and operational contexts.</li><li>Maintains high standards of accuracy, completeness and consistency in financial data, documentation and reporting.</li><li>Ability to communicate and explain financial information clearly to finance and non-finance colleagues and provide effective guidance to budget holders.</li><li>Advanced proficiency in Microsoft Excel and good working knowledge of financial monitoring, accounting and reporting tools.</li><li>Demonstrates appropriate judgement and confidentiality in handling sensitive financial and organisational information.</li><li>Experience or knowledge of procurement and logistics processes within an NGO, humanitarian, or development context would be an asset.</li></ul><p>Languages</p><ul><li>Fluency in English and Arabic, both written and spoken.</li><li>Knowledge of French and/or Kurdish is an asset.</li></ul><p><br></p>