School principal Jobs - Erbil Iraq

<p><h4>Purpose and scope:</h4> <p>The site manager has overall responsibility for cost, schedule and technical performance of the operation. Accountable for production, supply, production control/planning and quality management aspects of operation. Acts as primary point of contact for customers at the work site level.</p> <h4>Essential responsibilities:</h4> <li>Provides direction and leadership to all site assigned personnel.</li> <li>Prepares and submits site labor/non-labor budgets, forecast estimated costs and control subcontractors.</li> <li>Controls service contracts in support of site operations.</li> <li>Manages all department managers/staff assigned to site operations.</li> <li>Manages and coordinates research and investigations into business problems.</li> <li>Provides guidance and assistance relative to operating problems and projects.</li> <li>Performs all other position related duties as assigned or requested.</li> <h4>Minimum position knowledge, skills, and abilities required:</h4> <li>Bachelor's degree or equivalent combination of academic, technical or military training and experience.</li> <li>Proven experience working with foreign labor workforce.</li> <li>Possess 5 or more years of diverse management experience including experience in vehicle maintenance, facilities maintenance or logistics management.</li> <li>Possess excellent communication, analytical, project management and supervisory skills.</li> <li>Desktop computer skills are essential with proficiency in full range of Microsoft Office products and should be capable of preparing management level reports and presentations.</li> <li>Position may require occasional travel.</li> <li>Possess a valid state issued driver’s license.</li> <h4>Work environment, physical demands, and mental demands:</h4> <p>Typical office environment with no unusual hazards, occasional lifting to 20 pounds, constant sitting while using the computer terminal, constant use of sight abilities while reviewing documents, constant use of speech/hearing abilities for communication and constant mental alertness. Must possess planning/organizing skills and must be able to work under deadlines. Position requires routine travel to site operating locations.</p> <h4>Other responsibilities:</h4> <li><strong>Safety</strong> - The company enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid/buddy aid responsibilities, participating in emergency response tasks and serving on safety committees and teams.</li> <li><strong>Quality</strong> - Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the company quality policy and carry out job activities in compliance with applicable quality system documents and customer contracts. Each employee must read and understand his/her quality management and customer satisfaction responsibilities.</li> <li><strong>Procedure compliance</strong> - Each employee must read, understand and implement the general and specific operational, safety, quality and environmental requirements of all plans, procedures and policies pertaining to his/her job.</li></p><p></p>

<p><h4>Purpose and scope:</h4> <p>The site manager has overall responsibility for cost, schedule and technical performance of the operation. Accountable for production, supply, production control/planning and quality management aspects of operation. Acts as primary point of contact for customers at the work site level.</p> <h4>Essential responsibilities:</h4> <ul> <li>Provides direction and leadership to all site assigned personnel.</li> <li>Prepares and submits site labor/non-labor budgets, forecast estimated costs and control subcontractors.</li> <li>Controls service contracts in support of site operations.</li> <li>Manages all department managers/staff assigned to site operations.</li> <li>Manages and coordinates research and investigations into business problems.</li> <li>Provides guidance and assistance relative to operating problems and projects.</li> <li>Performs all other position related duties as assigned or requested.</li> </ul> <h4>Minimum position knowledge, skills, and abilities required:</h4> <ul> <li>Bachelor's degree or equivalent combination of academic, technical or military training and experience.</li> <li>Proven experience working with foreign labor workforce.</li> <li>Possess 5 or more years of diverse management experience including experience in vehicle maintenance, facilities maintenance or logistics management.</li> <li>Possess excellent communication, analytical, project management and supervisory skills.</li> <li>Desktop computer skills are essential with proficiency in full range of Microsoft Office products and should be capable of preparing management level reports and presentations.</li> <li>Position may require occasional travel.</li> <li>Possess a valid state issued driver’s license.</li> </ul> <h4>Work environment, physical demands, and mental demands:</h4> <p>Typical office environment with no unusual hazards, occasional lifting to 20 pounds, constant sitting while using the computer terminal, constant use of sight abilities while reviewing documents, constant use of speech/hearing abilities for communication and constant mental alertness. Must possess planning/organizing skills and must be able to work under deadlines. Position requires routine travel to site operating locations.</p> <h4>Other responsibilities:</h4> <p><strong>Safety</strong> - Amentum enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid/buddy aid responsibilities, participating in emergency response tasks and serving on safety committees and teams.</p> <p><strong>Quality</strong> - Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the Amentum Quality Policy and carry out job activities in compliance with applicable Amentum Quality System documents and customer contracts. Each employee must read and understand his/her Quality Management and Customer Satisfaction responsibilities.</p> <p><strong>Procedure compliance</strong> - Each employee must read, understand and implement the general and specific operational, safety, quality and environmental requirements of all plans, procedures and policies pertaining to his/her job.</p></p><p></p>

<p><h4>Purpose and scope:</h4> <p>The site manager has overall responsibility for cost, schedule and technical performance of the operation. Accountable for production, supply, production control/planning and quality management aspects of operation. Acts as primary point of contact for customers at the work site level.</p> <h4>Essential responsibilities:</h4> <li>Provides direction and leadership to all site assigned personnel.</li> <li>Prepares and submits site labor/non-labor budgets, forecast estimated costs and control subcontractors.</li> <li>Controls service contracts in support of site operations.</li> <li>Manages all department managers/staff assigned to site operations.</li> <li>Manages and coordinates research and investigations into business problems.</li> <li>Provides guidance and assistance relative to operating problems and projects.</li> <li>Performs all other position related duties as assigned or requested.</li> <h4>Minimum position knowledge, skills, and abilities required:</h4> <li>Bachelor's degree or equivalent combination of academic, technical or military training and experience.</li> <li>Proven experience working with foreign labor workforce.</li> <li>Possess 5 or more years of diverse management experience including experience in vehicle maintenance, facilities maintenance or logistics management.</li> <li>Possess excellent communication, analytical, project management and supervisory skills.</li> <li>Desktop computer skills are essential with proficiency in full range of Microsoft Office products and should be capable of preparing management level reports and presentations.</li> <li>Position may require occasional travel.</li> <li>Possess a valid state issued driver’s license.</li> <h4>Work environment, physical demands, and mental demands:</h4> <p>Typical office environment with no unusual hazards, occasional lifting to 20 pounds, constant sitting while using the computer terminal, constant use of sight abilities while reviewing documents, constant use of speech/hearing abilities for communication and constant mental alertness. Must possess planning/organizing skills and must be able to work under deadlines. Position requires routine travel to site operating locations.</p> <h4>Other responsibilities:</h4> <li><strong>Safety</strong> - The company enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid/buddy aid responsibilities, participating in emergency response tasks and serving on safety committees and teams.</li> <li><strong>Quality</strong> - Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the company quality policy and carry out job activities in compliance with applicable quality system documents and customer contracts. Each employee must read and understand his/her quality management and customer satisfaction responsibilities.</li> <li><strong>Procedure compliance</strong> - Each employee must read, understand and implement the general and specific operational, safety, quality and environmental requirements of all plans, procedures and policies pertaining to his/her job.</li></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>This position is located in Erbil. Purpose and Scope: The Site Manager has overall responsibility for cost, schedule and technical performance of the operation. Accountable for production, supply, production control/planning and quality management aspects of operation. Acts as primary point of contact for customers at the work site level. Essential Responsibilities: Provides direction and leadership to all site assigned personnel. Prepares and submits site labor/non-labor budgets, forecast estimated costs and control subcontractors Controls service contracts in support of site operations Manages all department managers/staff assigned to site operations Manages and coordinates research and investigations into business problems. Provides guidance and assistance relative to operating problems and projects. Perform all other position related duties as assigned or requested. Work Environment, Physical Demands, and Mental Demands: Typical office environment with no unusual hazards, occasional lifting to 20 pounds, constant sitting while using the computer terminal, constant use of sight abilities while reviewing documents, constant use of speech/hearing abilities for communication and constant mental alertness. Must possess planning/organizing skills and must be able to work under deadlines. Position requires routine travel to site operating locations. Other Responsibilities: Safety - Amentum enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid/buddy aid responsibilities, participating in emergency response tasks and serving on safety committees and teams. Quality - Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the Amentum Quality Policy and carry out job activities in compliance with applicable Amentum Quality System documents and customer contracts. Each employee must read and understand his/her Quality Management and Customer Satisfaction responsibilities. Procedure Compliance - Each employee must read, understand and implement the general and specific operational, safety, quality and environmental requirements of all plans, procedures and policies pertaining to his/her job.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelor's degree or equivalent combination of academic/technical/military training and experience</p><p>Proven experience working with foreign labor workforce.</p><p>Possess 5 or more years of diverse management experience including experience in vehicle maintenance, facilities maintenance or logistics management.</p><p>Possess excellent communication, analytical, project management and supervisory skills.</p><p>Desktop computer skills are essential with proficiency in full range of Microsoft Office products and should be capable of preparing management level reports and presentations.</p><p>Position may require occasional travel.</p><p>Possess a valid state issued driver s license.</p><p></p></section>

<p><h4>Purpose and scope:</h4> <p>The site manager has overall responsibility for cost, schedule and technical performance of the operation. Accountable for production, supply, production control/planning and quality management aspects of operation. Acts as primary point of contact for customers at the work site level.</p> <h4>Essential responsibilities:</h4> <ul> <li>Provides direction and leadership to all site assigned personnel.</li> <li>Prepares and submits site labor/non-labor budgets, forecast estimated costs and control subcontractors.</li> <li>Controls service contracts in support of site operations.</li> <li>Manages all department managers/staff assigned to site operations.</li> <li>Manages and coordinates research and investigations into business problems.</li> <li>Provides guidance and assistance relative to operating problems and projects.</li> <li>Performs all other position related duties as assigned or requested.</li> </ul> <h4>Minimum position knowledge, skills, and abilities required:</h4> <ul> <li>Bachelor's degree or equivalent combination of academic, technical or military training and experience.</li> <li>Proven experience working with foreign labor workforce.</li> <li>Possess 5 or more years of diverse management experience including experience in vehicle maintenance, facilities maintenance or logistics management.</li> <li>Possess excellent communication, analytical, project management and supervisory skills.</li> <li>Desktop computer skills are essential with proficiency in full range of Microsoft Office products and should be capable of preparing management level reports and presentations.</li> <li>Position may require occasional travel.</li> <li>Possess a valid state issued driver’s license.</li> </ul> <h4>Work environment, physical demands, and mental demands:</h4> <p>Typical office environment with no unusual hazards, occasional lifting to 20 pounds, constant sitting while using the computer terminal, constant use of sight abilities while reviewing documents, constant use of speech/hearing abilities for communication and constant mental alertness. Must possess planning/organizing skills and must be able to work under deadlines. Position requires routine travel to site operating locations.</p> <h4>Other responsibilities:</h4> <p><strong>Safety</strong> - Amentum enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid/buddy aid responsibilities, participating in emergency response tasks and serving on safety committees and teams.</p> <p><strong>Quality</strong> - Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the Amentum Quality Policy and carry out job activities in compliance with applicable Amentum Quality System documents and customer contracts. Each employee must read and understand his/her Quality Management and Customer Satisfaction responsibilities.</p> <p><strong>Procedure compliance</strong> - Each employee must read, understand and implement the general and specific operational, safety, quality and environmental requirements of all plans, procedures and policies pertaining to his/her job.</p></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Main Duties and Responsibilities:</p><ul><li>Lead and manage the finance and accounting team to ensure accurate, timely, and compliant financial reporting across all entities.</li><li>Develop, implement, and continuously improve financial policies, procedures, internal controls, and governance frameworks.</li><li>Prepare, review, and analyze consolidated financial statements for multiple companies and business units.</li><li>Lead the annual budgeting process and coordinate periodic forecasting, rolling forecasts, and long-term financial planning.</li><li>Develop financial models and scenario analyses to support strategic planning and executive decision-making.</li><li>Monitor organizational performance against budgets, forecasts, and financial targets, providing variance analysis and actionable recommendations.</li><li>Prepare monthly, quarterly, and annual management reports, executive dashboards, and board-level financial presentations.</li><li>Establish and monitor key financial and operational KPIs, providing insightful analysis on trends, profitability, liquidity, and operational efficiency.</li><li>Lead the Financial Planning &amp; Analysis (FP&amp;A) function by producing accurate forecasts, business performance analysis, and financial insights.</li><li>Drive cost control initiatives by identifying cost-saving opportunities, monitoring expenditures, and improving overall financial efficiency.</li><li>Analyze departmental spending, project costs, and overhead allocations to ensure optimal resource utilization.</li><li>Oversee cash flow forecasting, liquidity management, and working capital optimization.</li><li>Support executive management in evaluating investments, expansion opportunities, capital expenditures, and strategic initiatives.</li><li>Ensure compliance with IFRS, local accounting standards, donor requirements (for non-profit entities), and all applicable financial regulations.</li><li>Manage financial reporting and compliance requirements for both commercial and non-profit operations, ensuring transparency and accountability.</li><li>Liaise with external auditors, tax authorities, banks, donors, and other financial stakeholders.</li><li>Coordinate and oversee annual external audits and ensure timely resolution of audit findings.</li><li>Review contracts, grants, and major financial commitments to assess financial implications and risks.</li><li>Implement financial risk management practices and strengthen internal control systems.</li><li>Drive automation, digital transformation, and continuous process improvements across finance operations.</li><li>Develop standardized financial reporting templates and reporting packs to improve consistency, accuracy, and executive visibility.</li><li>Ensure the accuracy and integrity of financial data within ERP and accounting systems.</li><li>Mentor, coach, and develop finance team members while fostering a high-performance culture.</li><li>Collaborate closely with department heads to support operational planning, budgeting, and financial performance improvement.</li><li>Perform other finance and strategic assignments as directed by executive management.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor s degree in Accounting, Finance, or a related field (Master s preferred).</li><li>Minimum 8 years of progressive experience in finance and accounting, including 3+ years in a management role.</li><li>Strong knowledge of IFRS and local tax regulations.</li><li>Fluent in Kurdish, English and Arabic.</li><li>Proficient in accounting software (Zoho Books, ERPNext, or equivalent) and advanced Excel.</li><li>Experience managing multi-entity or group-level financial operations.</li><li>Strategic mindset with high attention to detail and integrity.</li><li>Excellent leadership, analytical, and communication skills.</li></ul><p>Working Conditions:</p><ul><li>Office Based - (5) Days per week &amp; (8) hours per day.</li><li>Only qualified candidates will be contacted.</li></ul><p></p></section>

<p><strong>Job Responsibilities:</strong>&nbsp;</p><p>&nbsp;</p><p><strong>1.Channel Development &amp; Customer Management</strong> &nbsp;&nbsp;</p><p>Develop new dealers and partners; maintain existing channel customers; negotiate policies, orders, pricing, and supply; resolve channel conflicts, unauthorized cross-regional selling, and pricing disorder.</p><p><strong>&nbsp;2.</strong> <strong>Market Promotion Execution</strong></p><p>Implement company promotional policies, rebates, and regional marketing campaigns; collect competitive intelligence on pricing, activities, and dynamics; report market information upward and propose countermeasures.</p><p><strong>3. Store Operations Management</strong> &nbsp;&nbsp;</p><p>Manage store standardization: display setup, stock allocation, inventory control, promotor scheduling, and retail standards; monitor out-of-stock and slow-moving products to drive high inventory turnover. &nbsp;&nbsp;</p><p><strong>4. Reporting &amp; Communication</strong> &nbsp;&nbsp;</p><p>Regularly submit regional sales reports, customer analysis, and weekly/monthly market reports; plan action plans for the following month. &nbsp;&nbsp;</p><p><strong>5.Order &amp; Receivables Control</strong></p><p>&nbsp;Track customer orders and coordinate shipments; focus on managing accounts receivable to reduce overdue and bad debt risks. &nbsp;&nbsp;</p><p><strong>6-Key Account / Government &amp; Enterprise Client Management</strong></p><p>&nbsp;Conduct regular visits to core key accounts within the region; deepen partnerships and identify incremental order opportunities. &nbsp;&nbsp;</p><p><strong>7-Team Management</strong> &nbsp;&nbsp;</p><p>Manage regional sales representatives, promoters, and other team members to improve work efficiency. &nbsp;&nbsp;</p><p>&nbsp;</p><p><strong>Requirements:</strong></p><ol><li>Educational background: Bachelor degree or above, marketing, business administration, electrical engineering and other related majors are preferred.</li><li>Work experience: more than 5 years of sales experience in the home appliance industry, more than 2 years of regional management or team management experience, familiar with home appliance products and channel operation models.</li><li>Channel resources: those with dealers, stores or e-commerce channel resources are preferred.</li><li>Data analysis: proficient in using office software and can drive decisions through data.</li><li>Negotiation and communication: good at customer negotiations and able to coordinate the interests of multiple parties.</li><li>Stress resistance: adapt to high-frequency business trips (covering cities in the region) and cope with performance pressure.</li></ol><p>&nbsp;</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Machinist, Maintenance will fabricate parts and components for equipment or items on fabrication work order and to meet specified or original specification requirements in accordance with applicable equipment technical directives referenced in the Technical Library.</p><p>Principal Accountabilities</p><ul><li>Interpret written instructions and specifications.</li><li>Plan and lay out of work to be completed.</li><li>Use a variety of machinist's hand tools and precision measuring instruments.</li><li>Set up and operate standard machine tools.</li><li>Responsible for the shaping of metal parts to close tolerances.</li><li>Make standard shop computations relating to dimensions of work, tooling, feeds, and speeds of machining.</li><li>Perform other qualified duties as requested.</li></ul><p>Knowledge &amp; Skills</p><ul><li>Knowledge of the working properties of the common metals, selecting standard materials, parts, and equipment required for this work</li><li>Knowledge of fitting and assembling parts into mechanical equipment.</li><li>Requires a rounded training in machine-shop practice, usually acquired through a formal apprenticeship or equivalent training and experience.</li></ul><p>Physical Requirements/Working Environment</p><ul><li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li><li>Must be able to climb stairs, ramps, ladders, and work stands.</li><li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li><li>May be required to lift heavy objects whose weight may exceed 50 pounds.</li><li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li><li>Will handle dirty parts and lubricants.</li><li>Will be required to wear proper Personal Protective Equipment (PPE).</li><li>Must be able to pass a Respirator Physical and Fit Test qualification.</li><li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, fork lift, etc.</li><li>Must be able to lift/push/pull minimum of 50 pounds.</li><li>May work in normal office environment, maintenance shop or outside.</li><li>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</li><li>May be exposed to extreme noise from operating equipment.</li><li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li></ul><p>Benefits Overview:</p><ul><li>Health, dental, and vision insurance</li><li>Paid time off and holidays</li><li>Retirement benefits (including 401(k) matching)</li><li>Educational reimbursement</li><li>Parental leave</li><li>Employee stock purchase plan</li><li>Tax-saving options</li><li>Disability and life insurance</li><li>Pet insurance</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Minimum Requirements</p><ul><li>High school diploma or equivalent.</li><li>U.S. military technical school or specialized training course is desired, certification of education level.</li><li>Four (4) or more years machinist experience with repair, modification, maintenance and overhaul of equipment related to individual specialty codes within the past six (6) years.</li><li>Must be in possession of a Valid U.S. Passport valid for 2 years and 6 blank pages at the time of hiring and be able to travel internationally.</li><li>Must be able to obtain and maintain facility Public Trust NAC-I. "Note: US Citizenship is required for facility Public Trust NAC-I at this work location".</li><li>Must be able to clear CENTCOM MOD Physicals requirements for deployment training (Will be required to attend CRC (DIDC).</li><li>Must be able to obtain Iraq visa.</li></ul><p></p></section>

<p><h4>Principal accountabilities</h4> <p>Interpret written instructions and specifications.<br> Plan and lay out work to be completed.<br> Use a variety of machinist's hand tools and precision measuring instruments.<br> Set up and operate standard machine tools.<br> Responsible for the shaping of metal parts to close tolerances.<br> Make standard shop computations relating to dimensions of work, tooling, feeds, and speeds of machining.<br> Perform other qualified duties as requested.</p> <h4>Minimum requirements</h4> <p>High school diploma or equivalent.<br> U.S. military technical school or specialized training course is desired, certification of education level.<br> Four (4) or more years’ machinist experience with repair, modification, maintenance, and overhaul of equipment related to individual specialty codes within the past six (6) years.<br> Must be in possession of a valid U.S. passport valid for 2 years and 6 blank pages at the time of hiring and be able to travel internationally.<br> Must be able to obtain and maintain facility Public Trust NAC-I. Note: US citizenship is required for facility Public Trust NAC-I at this work location.<br> Must be able to clear CENTCOM MOD physical requirements for deployment training (will be required to attend CRC (DIDC)).<br> Must be able to obtain Iraq visa.</p> <h4>Knowledge & skills</h4> <p>Knowledge of the working properties of common metals, selecting standard materials, parts, and equipment required for this work.<br> Knowledge of fitting and assembling parts into mechanical equipment.<br> Requires rounded training in machine-shop practice, usually acquired through a formal apprenticeship or equivalent training and experience.</p> <h4>Physical requirements / working environment</h4> <p>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.<br> Must be able to climb stairs, ramps, ladders, and work stands.<br> Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.<br> May be required to lift heavy objects whose weight may exceed 50 pounds.<br> Must be able to type using a standard keyboard to communicate through e-mail and various software applications.<br> Will handle dirty parts and lubricants.<br> Will be required to wear proper personal protective equipment (PPE).<br> Must be able to pass a respirator physical and fit test qualification.<br> May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.<br> Must be able to lift/push/pull minimum of 50 pounds.<br> May work in normal office environment, maintenance shop, or outside.<br> Must be able to work in a shop where the environment is drafty, noisy, and dirty.<br> May be exposed to extreme noise from operating equipment.<br> May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</p> <h4>Compensation details</h4> <p>Not applicable.</p> <p>The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws.</p> <h4>Benefits overview</h4> <p>Our health and welfare benefits are designed to support you and your priorities. Offerings include:</p> <ul> <li>Health, dental, and vision insurance</li> <li>Paid time off and holidays</li> <li>Retirement benefits (including 401(k) matching)</li> <li>Educational reimbursement</li> <li>Parental leave</li> <li>Employee stock purchase plan</li> <li>Tax-saving options</li> <li>Disability and life insurance</li> <li>Pet insurance</li> </ul> <p>Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a collective bargaining agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits.</p> <h4>Original posting</h4> <p>06/17/2026 - Until filled<br> The company anticipates this job requisition will remain open for at least three days, with a closing date no earlier than three days after the original posting. This timeline may change based on business needs.</p> <p>The company is proud to be an equal opportunity employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law.</p></p><p></p>

<p><h4>Location</h4> <p>Erbil, Iraq</p> <h4>Purpose and scope</h4> <p>Performs a variety of warehouse functions in support of a distribution depot. Interfaces with customers to verify discrepancies and resolve as appropriate. Performs quality assurance duties in support of the warehouse function.</p> <h4>Essential responsibilities</h4> <ul> <li>Assists in the planning, coordinating, and integrating the overall logistics / supply support requirements of all organic ground vehicle assets.</li> <li>Reviews available documents on operational mission requirements and recommends the most suitable organic and cost-effective logistics / supply support concepts.</li> <li>Participates in the planning and evaluation of exercises to ensure that logistics / supply support concepts are responsive to operational needs. Makes recommendations for improvements where necessary to increase the effectiveness of support required.</li> <li>Determines the need for, prepares, and conducts individual and group training, as required, on areas of interest within the logistics / supply area.</li> <li>Prepares correspondence on a daily basis on a variety of logistics / supply related issues as may be required.</li> <li>As directed, performs a variety of warehousing duties, which require an understanding of the establishment's storage plan.</li> <li>Verifies materials (or merchandise) against receiving documents, noting and reporting discrepancies and obvious damages.</li> <li>Stores, stacks, or palletizes materials in accordance with prescribed storage methods.</li> <li>May operate hand or power trucks in performing warehousing duties.</li> <li>Performs miscellaneous quality assurance duties including inspections, inventory process checks, inspecting and examining materials, article inspections, etc.</li> <li>Performs all other position related duties as assigned or requested.</li> </ul> <h4>Minimum position knowledge, skills, and abilities required</h4> <p>Vocational / technical training beyond high school and at least 5 years of job-related experience or equivalent.</p> <h4>Work environment, physical demands, and mental demands</h4> <p>Typical warehouse environment with no unusual hazards, frequent lifting to 20-60 pounds, kneeling, standing, and walking, routinely sitting and constant use of speech / hearing abilities for communication, constant mental alertness, must possess planning / organizing skills, and must be able to work under deadlines.</p> <h4>Other responsibilities</h4> <p><strong>Safety</strong> - Enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid / buddy aid responsibilities, participating in emergency response tasks and serving on safety committees and teams.</p> <p><strong>Quality</strong> - Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the Quality Policy and carry out job activities in compliance with applicable Quality System documents and customer contracts. Each employee must read and understand his / her Quality Management and Customer Satisfaction responsibilities.</p> <p><strong>Procedure compliance</strong> - Each employee must read, understand and implement the general and specific operational, safety, quality and environmental requirements of all plans, procedures and policies pertaining to his / her job.</p></p><p></p>

<p><h4>Location</h4> <p>Erbil, Iraq</p> <h4>Purpose and scope</h4> <p>Performs a variety of warehouse functions in support of a distribution depot. Interfaces with customers to verify discrepancies and resolve as appropriate. Performs quality assurance duties in support of the warehouse function.</p> <h4>Essential responsibilities</h4> <ul> <li>Assists in the planning, coordinating, and integrating the overall logistics / supply support requirements of all organic ground vehicle assets.</li> <li>Reviews available documents on operational mission requirements and recommends the most suitable organic and cost-effective logistics / supply support concepts.</li> <li>Participates in the planning and evaluation of exercises to ensure that logistics / supply support concepts are responsive to operational needs. Makes recommendations for improvements where necessary to increase the effectiveness of support required.</li> <li>Determines the need for, prepares, and conducts individual and group training, as required, on areas of interest within the logistics / supply area.</li> <li>Prepares correspondence on a daily basis on a variety of logistics / supply related issues as may be required.</li> <li>As directed, performs a variety of warehousing duties, which require an understanding of the establishment's storage plan.</li> <li>Verifies materials (or merchandise) against receiving documents, noting and reporting discrepancies and obvious damages.</li> <li>Stores, stacks, or palletizes materials in accordance with prescribed storage methods.</li> <li>May operate hand or power trucks in performing warehousing duties.</li> <li>Performs miscellaneous quality assurance duties including inspections, inventory process checks, inspecting and examining materials, article inspections, etc.</li> <li>Performs all other position related duties as assigned or requested.</li> </ul> <h4>Minimum position knowledge, skills, and abilities required</h4> <p>Vocational / technical training beyond high school and at least 5 years of job-related experience or equivalent.</p> <h4>Work environment, physical demands, and mental demands</h4> <p>Typical warehouse environment with no unusual hazards, frequent lifting to 20-60 pounds, kneeling, standing, and walking, routinely sitting and constant use of speech / hearing abilities for communication, constant mental alertness, must possess planning / organizing skills, and must be able to work under deadlines.</p> <h4>Other responsibilities</h4> <p><strong>Safety</strong> - Enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid / buddy aid responsibilities, participating in emergency response tasks and serving on safety committees and teams.</p> <p><strong>Quality</strong> - Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the Quality Policy and carry out job activities in compliance with applicable Quality System documents and customer contracts. Each employee must read and understand his / her Quality Management and Customer Satisfaction responsibilities.</p> <p><strong>Procedure compliance</strong> - Each employee must read, understand and implement the general and specific operational, safety, quality and environmental requirements of all plans, procedures and policies pertaining to his / her job.</p></p><p></p>

<p><h4>Job description</h4> <p>The computer systems analyst I provides several phases of the required systems analysis where the nature of the system is predetermined, uses established fact-finding approaches, knowledge of pertinent work processes and procedures, and familiarity with related computer programming practices, system software, and computer equipment.</p> <p>This analyst provides several phases of the required systems analysis where the nature of the system is predetermined, uses established fact-finding approaches, knowledge of pertinent work processes and procedures, and familiarity with related computer programming practices, system software, and computer equipment.</p> <p>Carries out fact finding and analyses as assigned, usually of a single activity or a routine problem, and applies established procedures where the nature of the system, feasibility, computer equipment, and programming language have already been decided.</p> <p>May assist a higher-level systems analyst by preparing the detailed specifications required by computer programmers from information developed by the higher-level analyst.</p> <p>May research routine user problems and solve them by modifying the existing system when the solutions follow clear precedents.</p> <p>Prepare cost and deadline estimates as required for review.</p> <p>Works independently to adapt guides to specific situations; resolve problems and deviations according to established practices; and obtain advice where precedents are unclear or not available.</p> <p>Carries out objectives, priorities, and deadlines as defined by the supervisor.</p> <p>May supervise technician and others who assist in specific assignments.</p> <p>Will have some variation within and across contracts and may list additional or specific job duties related to assigned function/level which are not aforementioned.</p> <h4>Minimum requirements</h4> <p>High school diploma or equivalent is required. Certification of education level is required.</p> <p>CompTIA Security+ certification.</p> <p>Must possess two (2) years of related experience in computer systems analysis.</p> <p>Ability to obtain and maintain a US government SECRET clearance is required (prefer active Secret clearance). US citizenship is required for SECRET clearance at this work location.</p> <p>A valid U.S. passport is required to travel internationally. Passport must have a minimum of 6 blank pages and 2 plus year validity on expiration date of passport.</p> <p>Must be able to pass CENTCOM medical requirements for deployment.</p> <p>Must be able to obtain a visa in CENTCOM locations.</p> <h4>Knowledge & skills</h4> <ul> <li>Requires competence in most phases of system analysis.</li> <li>Systems analysis and design skills in an area such as a record keeping or scientific operation.</li> <li>Knowledge of pertinent system software and computer equipment.</li> <li>Knowledge of work processes, applicable regulations, and practices of the assigned subject-matter area.</li> <li>Ability to recognize probable interactions of related computer systems and predict impact of a change in assigned system.</li> <li>Good problem-solving skills.</li> <li>Self-motivated and the ability to work independently.</li> </ul> <h4>Physical requirements/working environment</h4> <ul> <li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li> <li>Must be able to lift/push/pull minimum of 50 pounds.</li> <li>May work in maintenance shop or outside.</li> <li>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</li> <li>May be exposed to extreme noise from operating equipment.</li> <li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li> <li>May be expected to work in austere environments and all weather conditions.</li> </ul></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Supervise and coordinate daily store operations to ensure efficiency and compliance with company standards. Drive sales performance through proactive engagement and product knowledge.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>High-school diploma / preferably with a bachelor's degree (business or optometry)</p><p>2 years of experience in sales and customer service.</p><p>Language Skills: Kurdish and Arabic, English is a plus.</p><p>Basic computer skills.</p><p>Good communication and customer service skills.</p><p></p></section>

<p><h4>Job Description</h4> <p>The UH-60 Aircraft Mechanic AM-II performs the full range of military tactical aircraft maintenance and maintains, repairs, and troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneuhydraulic, engines, auxiliary power unit, and ventilation and heating systems.</p> <p>Remove and install aircraft subsystem assemblies and components such as engines, rotors, transmissions, mechanical flight controls and their components.</p> <p>Service and lubricate aircraft and subsystems.</p> <p>Safely prepare aircraft for inspections and maintenance checks and services.</p> <p>Perform scheduled inspections and assist in performing special inspections.</p> <p>Perform limited maintenance operational checks and diagnose and troubleshoot aircraft systems using special tools and test equipment as required.</p> <p>Use and perform operator maintenance on tools, special tools, and aircraft ground support equipment.</p> <p>Apply comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as aircraft technical manuals, maintenance information and action messages, and all technical guidance provided through government official representatives.</p> <p>Maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components.</p> <p>Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and use required expertise in restoring equipment condition and/or operation.</p> <p>Participate in maintenance test flights and operation checks as required.</p> <p>Perform other duties as requested.</p> <h4>Minimum Requirements</h4> <ul> <li>High school diploma or equivalent required.</li> <li>Three (3) or more years aviation maintenance experience within the past five (5) years on the (MDS)-UH60.</li> <li>OR FAA A&P license AND two (2) years of aviation maintenance experience within the past five (5) years on the (MDS)-UH60.</li> <li>U.S. military technical school or specialized training course is desired; certification of education level is required.</li> <li>Must be in possession of a valid U.S. passport valid for 2 years at the time of hiring and be able to travel internationally.</li> <li>Must be able to obtain and maintain facility Public Trust NAC-I. Note: US citizenship is required for facility Public Trust NAC-I at this work location.</li> <li>Must be able to clear CENTCOM MOD physical requirements for deployment training (will be required to attend CRC (DIDC)).</li> <li>Must be able to obtain Iraq visa.</li> </ul> <h4>Knowledge & Skills</h4> <ul> <li>Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures, and replacement of parts.</li> <li>Broad knowledge of aircraft sheet metal/structural modifications and repair.</li> <li>Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes, and shears.</li> <li>Working knowledge of technical publications and logistics information systems.</li> <li>Able to prioritize workloads to maintain schedules on assigned projects and may be required to lead teams through more complex aircraft relevant tasks.</li> <li>Participate in maintenance test flights and operation checks as required.</li> <li>Possess the level of experience to inspect all required aeronautical type maintenance to be performed by mechanics.</li> <li>The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.</li> </ul> <h4>Physical Requirements / Working Environment</h4> <ul> <li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li> <li>Must be able to climb stairs, ramps, ladders, and work stands.</li> <li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li> <li>May be required to lift heavy objects whose weight may exceed 50 pounds.</li> <li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li> <li>Will handle dirty parts and lubricants.</li> <li>Will be required to wear proper personal protective equipment (PPE).</li> <li>Must be able to pass a respirator physical and fit test.</li> <li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</li> <li>Must be able to lift/push/pull minimum of 50 pounds.</li> <li>May work in maintenance shop or outside.</li> <li>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</li> <li>May be exposed to extreme noise from operating equipment.</li> <li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li> <li>May be expected to work in austere environments and all-weather conditions.</li> </ul></p><p></p>

<p><h4>Job description</h4> <p>The UH-60 aircraft mechanic AM-II performs the full range of military tactical aircraft maintenance and maintains, repairs, and troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneumatic and hydraulic systems, engines, auxiliary power unit, and ventilation and heating systems.</p> <p>Remove and install aircraft subsystem assemblies and components such as engines, rotors, transmissions, mechanical flight controls and their components.<br> Service and lubricate aircraft and subsystems.<br> Safely prepare aircraft for inspections and maintenance checks and services.<br> Perform scheduled inspections and assist in performing special inspections.<br> Perform limited maintenance operational checks and diagnose and troubleshoot aircraft systems using special tools and test equipment as required.<br> Use and perform operator maintenance on tools, special tools, and aircraft ground support equipment.<br> Apply comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as aircraft technical manuals, maintenance information and action messages, and all technical guidance provided through government official representatives.<br> Maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components.<br> Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and use required expertise in restoring equipment condition and/or operation.<br> Participate in maintenance test flights and operation checks as required.<br> Perform other duties as requested.</p> <h4>Minimum requirements</h4> <p>High school diploma or equivalent required.<br> Three (3) or more years aviation maintenance experience within the past five (5) years on the (MDS)-UH60.<br> OR FAA A&P license AND two (2) years of aviation maintenance experience within the past five (5) years on the (MDS)-UH60.<br> U.S. military technical school or specialized training course is desired; certification of education level is required.<br> Must be in possession of a valid U.S. passport valid for 2 years at the time of hiring and be able to travel internationally.<br> Must be able to obtain and maintain facility public trust NAC-I. <strong>Note: US citizenship is required for facility public trust NAC-I at this work location.</strong><br> Must be able to clear CENTCOM MOD physical requirements for deployment training (will be required to attend CRC (DIDC)).<br> Must be able to obtain Iraq visa.</p> <h4>Knowledge and skills</h4> <p>Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures, and replacement of parts.<br> Broad knowledge of aircraft sheet metal/structural modifications and repair.<br> Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes, and shears.<br> Working knowledge of technical publications and logistics information systems.<br> Able to prioritize workloads to maintain schedules on assigned projects and may be required to lead teams through more complex aircraft relevant tasks.<br> Participate in maintenance test flights and operation checks as required.<br> Possess the level of experience to inspect all required aeronautical type maintenance to be performed by mechanics.<br> The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.</p> <h4>Physical requirements / working environment</h4> <p>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.<br> Must be able to climb stairs, ramps, ladders, and work stands.<br> Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee, and reach above/below shoulders.<br> May be required to lift heavy objects whose weight may exceed 50 pounds.<br> Must be able to type using a standard keyboard to communicate through e-mail and various software applications.<br> Will handle dirty parts and lubricants.<br> Will be required to wear proper personal protective equipment (PPE).<br> Must be able to pass a respirator physical and fit test.<br> May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.<br> Must be able to lift/push/pull minimum of 50 pounds.<br> May work in maintenance shop or outside.<br> Must be able to work in a shop where the environment is drafty, noisy, and dirty.<br> May be exposed to extreme noise from operating equipment.<br> May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.<br> May be expected to work in austere environments and all-weather conditions.</p></p><p></p>

<p><h4>Job Description</h4> <p>The computer systems analyst I provides several phases of the required systems analysis where the nature of the system is predetermined, uses established fact-finding approaches, knowledge of pertinent work processes and procedures, and familiarity with related computer programming practices, system software, and computer equipment.</p> <p>This analyst provides several phases of the required systems analysis where the nature of the system is predetermined, uses established fact-finding approaches, knowledge of pertinent work processes and procedures, and familiarity with related computer programming practices, system software, and computer equipment.</p> <p>Carries out fact finding and analyses as assigned, usually of a single activity or a routine problem, and applies established procedures where the nature of the system, feasibility, computer equipment, and programming language have already been decided.</p> <p>May assist a higher-level systems analyst by preparing the detailed specifications required by computer programmers from information developed by the higher-level analyst.</p> <p>May research routine user problems and solve them by modifying the existing system when the solutions follow clear precedents.</p> <p>Prepare cost and deadline estimates as required for review.</p> <p>Works independently to adapt guides to specific situations; resolve problems and deviations according to established practices; and obtain advice where precedents are unclear or not available.</p> <p>Carries out objectives, priorities, and deadlines as defined by the supervisor.</p> <p>May supervise technicians and others who assist in specific assignments.</p> <p>Will have some variation within and across contracts and may list additional or specific job duties related to assigned function or level which are not aforementioned.</p> <h4>Minimum Requirements</h4> <ul> <li>High school diploma or equivalent is required. Certification of education level is required.</li> <li>CompTIA Security+ certification.</li> <li>Must possess two (2) years of related experience in computer systems analysis.</li> <li>Ability to obtain and maintain a US government SECRET clearance is required (prefer active Secret clearance). US citizenship is required for SECRET clearance at this work location.</li> <li>A valid U.S. passport is required to travel internationally. Passport must have a minimum of 6 blank pages and 2 plus year validity on expiration date of passport.</li> <li>Must be able to pass CENTCOM medical requirements for deployment.</li> <li>Must be able to obtain a visa in CENTCOM locations.</li> </ul> <h4>Knowledge & Skills</h4> <ul> <li>Requires competence in most phases of system analysis.</li> <li>Systems analysis and design skills in an area such as a record keeping or scientific operation.</li> <li>Knowledge of pertinent system software and computer equipment.</li> <li>Knowledge of work processes, applicable regulations, and practices of the assigned subject-matter area.</li> <li>Ability to recognize probable interactions of related computer systems and predict impact of a change in assigned system.</li> <li>Good problem-solving skills.</li> <li>Self-motivated and the ability to work independently.</li> </ul> <h4>Physical Requirements / Working Environment</h4> <ul> <li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li> <li>Must be able to lift, push, or pull a minimum of 50 pounds.</li> <li>May work in maintenance shop or outside.</li> <li>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</li> <li>May be exposed to extreme noise from operating equipment.</li> <li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li> <li>May be expected to work in austere environments and all weather conditions.</li> </ul></p><p></p>

<p>What we do Since 1863, the International Committee of the Red Cross (ICRC) has worked to preserve human dignity and relieve suffering caused by war and armed violence. In collaboration with our Red Cross and Red Crescent partners around the world, we do everything we can to deliver life-saving aid, reconnect families and locate missing people helping those who need it most, regardless of who they are and what side of the front line they are on. We engage with authorities and armed forces on all sides, often confidentially, pressing for access to detainees to improve their living conditions and urging compliance with international humanitarian law to protect non-combatants, including from digital threats.</p><p>Purpose The Light Vehicles Driver transports people and goods in a safe and timely manner, in accordance with ICRC rules and regulations and national traffic laws.</p><p>Accountabilities &amp; functional responsibilities</p><ul><li>Drives light vehicles to transport people and/or material in strict adherence to internal security rules and national traffic laws.</li><li>Follows the safety and security guidelines and is aware of/and reacts to the current security situation.</li><li>Constantly monitors security conditions on the road.</li><li>Ensures that goods are stored inside the vehicle according to local, international and ICRC safety standards (attachment and distribution of goods, etc.).</li><li>Checks their assigned vehicle(s)' equipment, general functioning and body condition and ensures that it is kept fuelled and clean inside and out.</li><li>Checks that trips have been authorized where necessary.</li><li>Immediately reports accidents, defects and/or missing equipment to management.</li><li>Can act as head of convoy as needed (in charge of the driver(s), application of security rules and time-frame for the convoy).</li><li>Ensures that risks are mitigated by performing the controls assigned to his/her role as described in the Logistics Risk and Control Matrix</li></ul><p>What we offer</p><ul><li>By joining our organization, you will have an opportunity to practise your profession in stimulating, complex, and sometimes challenging environments, where your work can really make a difference.</li><li>You will work with colleagues from various fields of expertise in a cross-cutting manner to help victims of conflict and other situations of violence. You will be dealing with humanitarian situations that require experience, resourcefulness, and innovation to achieve the best possible impact.</li><li>You will work for the oldest major international humanitarian organization in the world, adding to your sense of achievement in alleviating the suffering of people and communities and giving you the chance to promote humanitarian values in these turbulent times.</li><li>You will benefit from a competitive employment package, including different possibilities for career and personal development. You will take part in an onboarding course and follow continuous training to build your career within the ICRC and beyond.</li><li>Competitive compensation package, a monthly salary with benefits including (13th salary, International Retirement Saving Plan (IRSP), medical coverage, life insurance, mobility allowance).</li></ul><p><br></p><p><strong>Desired Candidate Profile</strong></p><h2>Certifications / Education required</h2><ul><li>Secondary school diploma.</li><li>Driving license B (BE, B1) held for at least five years.</li></ul><h2>Professional experience required</h2><ul><li>At least 3 5 years of professional driving experience with a clean driving record.</li><li>Automobile maintenance experience (oil checks, changing tyres, etc.).</li><li>Basic knowledge of mechanics.</li><li>Good knowledge of the area of assignment.</li></ul><h2>Language</h2><ul><li>Fluent in Kurdish (spoken and written)</li><li>Knowldge of English and Arabic (written and spoken) is an asset.</li></ul>

<p><b>Main Duties and Responsibilities:</b></p><p>Lead, mentor, and develop the finance team to ensure high performance and adherence to financial standards.</p><p>Design, implement, and continuously improve financial processes, internal controls, and reporting systems.</p><p>ERP Implementation and Chart of Accounts preparation and Module integration.</p><p>Collaborate with the project teams, consultants, and other units, etc. for the budget preparation and collect necessary information which is required for the financial planning.</p><p>Implement banking strategy and proactively plan for the treasury and working capital for the short-term and long-term financial planning.</p><p>Negotiate with banks for the charges and the options to execute the transfers without delays.</p><p>Prepare and deliver financial reports, analyses, and recommendations to senior management for informed decision-making.</p><p>Perform budget vs. actual analyses, highlighting variances and proposing corrective actions or cost-saving strategies.</p><p>Oversee payroll processing, including calculations, deductions, approvals, and record maintenance.</p><p>Execute internal and external payments in accordance with approvals and organizational procedures.</p><p>Monitor project expenditures, track commitments, and ensure alignment with approved budgets and funding sources.</p><p>Ensure compliance with tax obligations, social security reporting, and other statutory requirements.</p><p>Support employees in banking matters, including account setup and necessary identification processes.</p><p>Manage relationships with banks, vendors, and key stakeholders to ensure smooth and timely financial operations.</p><p>Identify opportunities to optimize workflows, reduce financial risk, and enhance reporting accuracy.</p><p>Report any issues or discrepancies promptly to the line manager or HR and take corrective measures.</p><p>Adhere to organizational values, policies, and procedures in all financial activities.</p><p>Identify the risk involved in the transactions and provide suggestions to senior management for mitigating the risk.</p><p>Perform any other tasks assigned by the line manager.</p><p><strong>Desired Candidate Profile</strong></p><p>Bachelor s degree in Finance, Accounting, Economics, or a related field.</p><p>A master's degree or finance-related certification (e.g., CPA, ACCA, CFA, CMA) is highly desirable.</p><p>Previous experience [7-9 years] in finance and accounting, financial management, accounting, or auditing.</p><p>Minimum [2 3 years] in a supervisory or managerial role.</p><p>Proven experience in budgeting, financial reporting, and audit coordination.</p><p>Strong organization, planning, and execution skills.</p><p>Strong leadership and team management skills.</p><p>Excellent analytical, budgeting, and financial forecasting abilities.</p><p>In-depth knowledge of accounting principles, financial systems, and audit practices.</p><p>Excellent attention to detail and high level of accuracy.</p><p>Proficiency in Microsoft Excel and financial reporting tools.</p><p>Solid understanding of accounting principles and financial statements.</p><p>Strong English is required; Kurdish is desired.</p><p>Prepared to work additional hours when required.</p><p>Report any issues to the line manager or HR.</p><p>Adhere to SP office values, policies, and procedures.</p><p>Traveling to other locations within or outside the country for work and staying overnight.</p><p>Maintain confidentiality of information.</p><p>Government experience</p><p>Experience using accounting or ERP systems.</p><p>Background in developing or improving financial management systems.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Directs a professional team encompassing a wide range of functions within the discipline: Interviews, selects and places candidates into open positions within area of responsibility. Evaluates staff, comparing objectives and achievements in the assessment. Coaches employees in their professional career development and process improvements. Issues discipline whenever required. Ensures employees are informed of and use safe work practices. Recommends termination or contract non-renewal when appropriate. Directs a professional team encompassing a range of functions within the F&amp;ES Services Department: Manages the Fire and Emergency Services (F&amp;ES) programs. To support Army operations in camps, ammunition supply point, Army heliport, dormitories, retail facilities, and specialized maintenance facilities. Serves as the primary point of contact to Camp Commanders on Fire Prevention and Emergency Operation issues. Ensures that the commander is aware of fire regulations pertaining to fire protection. Attends, participates, and plays a leadership role in community events in order to enhance the image of the Fire Department. Executes programs for training, fire prevention, fire protection, aircraft fire rescue fighting, and other responsibilities as outlined in the Fire Department's Statement of Work (SOW). Maintains a close working relationship with the agencies responsible for law enforcement and water supply, emergency medical services, among others, in order to operate in an effective and cooperative manner. Develops shift schedules to insure adequate numbers of fire fighters and vehicles are assigned to fire stations supporting Camps. Prepares action plans. Given an emergency incident requiring multiple agency operations, so that the required resources are determined and the assignment and placement of the resources are designated in order to mitigate the incident. Coordinates equipment maintenance and inspections of Fire Stations equipment for operational readiness. Maintains, develops, and provides leadership for Risk Management. Responsible for oversight of the development of the department's strategic master plan. Responds to fire, rescue, hazardous materials and other emergencies assigned to the Fire and Emergency Services for supporting Army operations including but not limited to camps, ammunition supply point, and Army heliport. Directs mutable companies during emergency level operations for structural fires, aircraft fires, rescue operations, medical emergencies, and hazardous materials responses. Shall conduct or assist in Fire Investigations pending proper certifications; as needed. Performs other related tasks as directed</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>High school diploma required. Must provide a copy of the diploma or college transcript Associates degree preferred Must be a U.S. Citizen Must be able to pass annual firefighter Occupational Health Exam and SCBA Fit Testing IAW NFPA 1582 and 1583 Clearance Requirements: Must have an active secret clearance. Certification Requirements: Fire Officer III, Fire Inspector II, Fire Instructor II, Airport Firefighter, Driver Operator and HAZMAT Incident Commander Experience: Must have a minimum of five (5) years of experience as a Fire Inspector Must have in-depth knowledge of and experience implementing the NFPA code Must have a minimum of five (5) years experience in a supervisor position Required to have IFSAC or ProBoard Certification Skills: Excellent communication skills, both oral and written. Computer skills including MS-Word, Power Point, Excel and Outlook. Must be able to pass the required medical and physical exams, as applicable. Must be able to use evaluative methods, to analyze data, and to communicate with other departments. Have knowledge of the chemistry of fire, preventive maintenance and operations of firefighting and rescue equipment, physical and chemical properties of combustible materials and building structures and their component systems. Have experience in managing fire prevention and protection plans and programs. Have the knowledge to act for the Deputy Fire Chief during his absence. Must also have experience at management of self-inspection and compliance measurement program Supervisory Responsibilities: Directs and maintains readiness for multiple personnel and apparatuses responding to F&amp;ES emergencies. Working Conditions: Must be capable of working in an extreme weather conditions with temperatures exceeding 120 degrees Fahrenheit. Indoor and/or outdoor environment with very adverse and harsh conditions (i.e., hot, dry, duty, desert environment with average temperatures of 30 degrees in the winter and 130 degrees in the summer months). Includes some industrial production environment conditions as well. Physical Requirements: Light Medium work. Exerting up to 50pounds of force occasionally, and/or up to 30pounds of force frequently, and/or up to 30 pounds of force constantly to move objects. Work may require heavy lifting, stooping, climbing, prolonged standing, prolonged sitting, and working with or in areas where a potential could exist for exposure to physical, chemical, or biological agents. Employee use of personal protective equipment (PPE) is required for some situations. PPE includes, but is not limited to, head, foot, torso, respiratory, vision, and hearing protective devices. Must comply with all Fire and Safety Regulations and post policies.</p><p></p></section>

<p>In coordination with the RMO, support the R&amp;R Officer PSD in monitoring the financial aspects of all PSD projects, including overseeing expenditure, fund availability, and cash flow management. Proactively prepare expenditure plans, internal monitoring reports, for all PSD projects. Identify and address bottlenecks, recommend solutions, and ensure approval processes are followed. In collaboration with PSD Project Officers, PSD Reporting Officer, Partnerships and Coordination Division and RMU, provide support to the R&amp;R Officer in drafting and reviewing project budgets. Assist in conducting analyses on variations between budgeted and actual expenditures and forecast future budget requirements. In collaboration with Resources Management Officer (RMO), identify any unusual trends and notify Project Managers and RMO for timely action and potential remedies to keep projects on track. In collaboration with PSD Officers and relevant technical staff, participate in the design of solutions for PSD's operational requirements. This includes new systems, processes, or tools to meet the identified needs. Support the R&amp;R Officer and program staff in coordinating internal activities and pay particular attention to emerging and cross-cutting issues and work closely with the R&amp;R Officer to address them. Support the successful implementation of PSD projects by facilitating timely and appropriate resource mobilization. Proactively identify opportunities for program development. In coordination with the PSD Reporting Officer conduct project monitoring and evaluation activities through field visits, identify opportunities for development, and flag accountability issues and solutions to the Head of PRD. Support the PSD Project Officers in forecasting cash flows based on project activities and ensure financial expenditures and records adhere to donor agreements. Monitor and track projectization for PSD staff and operations. Track commitments, precommitments, and expenditures to ensure operations align with the project budget. Support program staff in the procurement, transportation and facilitating access in all regions of the country. Collaborate with the Liaison and Access team to address any access issues. Collaborate with Supply Chain Unit to assess the impact of price changes on the overall procurement process. Determine how the price changes may affect budgets, delivery timelines, and other logistical considerations. Perform any additional duties as assigned.</p><p><strong>Desired Candidate Profile</strong></p><h2>Education</h2><p>University degree in Accounting or Business Administration or in a related field from an accredited academic institution with 5 years of relevant professional experience; or Completed Hight School Degree in the above fields or related field from an accredited academic institution with 7 years of relevant professional experience; Accredited Universities are those listed in the UNESCO World Higher Education Database.</p><h2>Experience</h2><p>Experience in emergency settings and complex environments. Experience in IOM administrative and financial management, budget monitoring, cash management and internal control procedures. Experience in the usage of office software packages (MS Word, Excel, etc.) and knowledge of spreadsheet and data analysis. Experience in working in an international environment and in liaising with a variety of partners at all levels of the hierarchy.</p><h2>Skills</h2><p>Familiarity with IOM/UN administrative and financial management. Excellent coordination and information management skills. Ability to extract, interpret, analyse and format data and make decision rapidly to resolve operational problems. Capacity to work effectively in high-pressure, rapidly changing environments. Ability to meet deadlines and work under pressure. Personal commitment, efficiency, flexibility, drives for results. Ability to work effectively and harmoniously with colleagues from varied cultures and professional backgrounds. Ability to handle confidential matters.</p><h2>Languages</h2><p>Fluency in English is required Arabic and Kurdish are advantage Languages. IOM s official languages are English, French and Spanish. Proficiency of language(s) required will be specifically evaluated during the selection process, which may include written and/or oral assessments.</p><h2>Required Competencies</h2><p>IOM s competency framework can be found at this link . Competencies will be assessed during the selection process.</p><h2>Values</h2><p>all IOM staff members must abide by and demonstrate these three values:</p><ul><li><strong>Inclusion and respect for diversity:</strong> Respects and promotes individual and cultural differences. Encourages diversity and inclusion.</li><li><strong>Integrity and transparency:</strong> Maintains high ethical standards and acts in a manner consistent with organizational principles/rules and standards of conduct.</li><li><strong>Professionalism:</strong> Demonstrates ability to work in a composed, competent and committed manner and exercises careful judgment in meeting day-to-day challenges.</li></ul><h2>Courage:</h2><p>Demonstrates willingness to take a stand on issues of importance.</p><h2>Empathy:</h2><p>Shows compassion for others, makes people feel safe, respected and fairly treated.</p><h2>Core Competencies behavioural indicators (Level 2)</h2><ul><li><strong>Teamwork:</strong> Develops and promotes effective collaboration within and across units to achieve shared goals and optimize results.</li><li><strong>Delivering results:</strong> Produces and delivers quality results in a service-oriented and timely manner. Is action oriented and committed to achieving agreed outcomes.</li><li><strong>Managing and sharing knowledge:</strong> Continuously seeks to learn, share knowledge and innovate.</li><li><strong>Accountability:</strong> Takes ownership for achieving the Organization s priorities and assumes responsibility for own actions and delegated work.</li><li><strong>Communication:</strong> Encourages and contributes to clear and open communication. Explains complex matters in an informative, inspiring and motivational way.</li></ul><h2>Managerial Competencies behavioural indicators (Level 2)</h2><p>(applicable only if position is with direct reports)</p><ul><li><strong>Leadership:</strong> Provides a clear sense of direction, leads by example and demonstrates the ability to carry out the Organization s vision. Assists others to realize and develop their leadership and professional potential.</li><li><strong>Empowering others:</strong> Creates an enabling environment where staff can contribute their best and develop their potential.</li><li><strong>Building Trust:</strong> Promotes shared values and creates an atmosphere of trust and honesty.</li><li><strong>Strategic thinking and vision:</strong> Works strategically to realize the Organization s goals and communicates a clear strategic direction.</li><li><strong>Humility:</strong> Leads with humility and shows openness to acknowledging own shortcomings.</li></ul>