UI developer Jobs

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Aerostat Operators provide Operations and Sustainment (O&amp;S) support for the Persistent Surveillance Systems Tethered (PSS-T) program in OCONUS site locations. PSS-T is comprised of former Persistent Ground Surveillance System (PGSS) and Persistent Threat Detection System (PTDS) programs. Essential Responsibilities: Aerostat Operators/User-level maintainers will participate in the overall, hands-on operation of the aerostat system including launch, in-flight, recovery, and moored activities. Candidates will perform all functions to operate the PGSS/PTDS, an aerostat mounted Intelligence, Surveillance, And Reconnaissance (ISR) platform, its Mobile Mooring Platform (MMP), Sensor Payload(s), communications and navigation systems as well as associated support equipment (Boom Lift, Forklift, All Terrain Vehicles (ATV's), and Electrical Power Generators). Additional responsibilities include performing analyses of system operations and candidates must have:</p><p>Knowledge of and experience in the operations of hardware systems and components. Experience in fault detection, isolation, and correction of hardware systems and individual components. Ability to perform routine system maintenance and analysis functions including: hardware configurations; adding, removing and replacing hardware components; use of hardware and software diagnostic testing tools; reading of electronic circuit schematics; and repairing printed circuit boards. Candidate will perform User-level maintenance functions include performing hands-on Preventative Maintenance Checks and Services (PMCS), troubleshooting, removing and replacing Line Replaceable Units (LRUs), and removing and replacing payloads. Candidate must possess a diverse range of skills with the ability to quickly adapt to new situations. Tasks will be performed under direction of higher classified technicians and/or site personnel.</p><p>Physical Requirements: Requires the ability to regularly lift up to 50 lbs. Requires the ability to regularly climb extension ladders, roof ladder, stepladders, and stairs at least 10 times during shift. Requires the flexibility to bend/stoop, squat repetitive during shift. Requires the ability to regularly kneel repetitive for shift. Requires the ability to move in a 90-degree fashion on a repetitive basis for shift. Requires the ability to stretch/reach on a repetitive basis for shift. Requires the ability to walk extensively throughout the plant during shift. Requires the ability to interact with all clients in a professional and friendly manner despite periods of stress.</p><p>Medical Requirements Successfully complete and pass the medical and dental examinations as required by Amentum and our customer for deployment to Iraq. Must maintain physical and dental requirements for the duration of the deployment.</p><p>Working and Living Conditions: This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environment. Temperatures can reach PHONE_NUMBER degrees Fahrenheit/50-55 degrees Celsius during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to CENTCOM, EUCOM, and AFRICOM for extended periods. Work schedules are a minimum of 6 days per week and 10 hours per day, while some jobs have higher daily and weekly minimums. #TAMOD</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>High school diploma or equivalent is required.</li><li>Two-year Associate s degree in a technical field from an accredited college can substitute for work experience.</li><li>Must have an active Secret US Government Clearance.</li><li>Note: US Citizenship is required to obtain a Secret Clearance.</li><li>At least ONE (1) year previous Aerostat experience.</li><li>Certified and school trained on 34M and 74K.</li><li>Must have a valid U.S. passport with a minimum of one year remaining.</li><li>Must have valid US Driver's license.</li><li>Knowledge of and experience in the operations of hardware systems and components.</li><li>Experience in fault detection, isolation, and correction of hardware systems and individual components.</li><li>Ability to perform routine system maintenance and analysis functions including: hardware configurations; adding, removing and replacing hardware components; use of hardware and software diagnostic testing tools; reading of electronic circuit schematics; and repairing printed circuit boards.</li><li>Candidate must possess a diverse range of skills with the ability to quickly adapt to new situations.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Zain Iraq is Actively recruiting to hire Direct Sales Customer Service Representative-Kirkuk who is responsible for handling the day-to-day requests from customers and ensuring the resolution of complaints in an efficient and timely manner whilst ensuring a high level of customer satisfaction. The jobs are also responsible for direct interaction with current and potential customers within Zain IQ outlets about sales or information on products/services.</p> <p><strong>Key Responsibilities</strong></p> <ul> <li>Understand Direct Sales Strategy and plans and participate in the achievement of objectives and targets</li> <li>Implement Direct Sales policies and procedures</li> <li>Handle e-mails and follow-up with customers concerning different requests/complaints ensuring fulfillment of their needs and requirements</li> <li>Coordinate with billing and collection control to re-activate accounts / update account status to ensure up-to-date customer information at all times</li> <li>Coordinate new outlets needs in terms of manpower, logistics, equipment, maintenance and other needs to ensure efficient launching and operations</li> <li>Act as quality control on the Sales Representatives and report their failures to the Senior Sales Representative to tackle areas for development and training</li> <li>Handle the opening of direct sales new branches and exchange offices and coordinate their needs in terms of manpower, logistics, equipment, policies and procedures, forms, brochures, marketing material and other needs to ensure efficient operations</li> <li>Handle existing branches renovations/visit branches periodically to check maintenance requirements ensuring an adequate work environment for a healthy customer experience</li> <li>Submit daily reports to direct report mentioning interventions and activities conducted and keep records of feedback/customer transactions and interactions as needed to track achievements and get recommendations</li> <li># of non-compliance to direct sales policies and procedures</li> <li>Average handling time (Time from initial customer request to closing the request)</li> </ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><strong>Education</strong></p> <ul> <li>Bachelor s degree in a business administration-related field or equivalent</li> </ul> <p><strong>Experience</strong></p> <ul> <li>Up to 2 years of experience in related field</li> </ul> <p><strong>Competencies</strong></p> <p>Behavioral</p> <ul> <li>Serving our Customers</li> <li>Achievement Driven</li> <li>Information Seeking</li> <li>Relationship Building</li> </ul> <p>Technical</p> <ul> <li>Oral &amp; written Communication</li> <li>Managing Information</li> </ul> <p>Technology Application</p> <ul> <li>IT user support</li> <li>Sales Management</li> </ul> <p>IDE Competency</p> <ul> <li>Courage to Engage</li> <li>Addressing Bias</li> <li>Allyship</li> </ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Role Purpose <br> <p><span>Zain Iraq is Actively recruiting to&nbsp;hire&nbsp;Direct Sales Customer Service Representative-Kirkuk who is responsible for handling the day-to-day requests from customers and ensuring the resolution of complaints in an efficient and timely manner whilst ensuring a high level of customer satisfaction. The jobs are also responsible for direct interaction with current and potential customers within Zain IQ outlets about sales or information on products/services.</span></p><br> <br> <br><br> Key Responsibilities <br> <ul><li><p><span>Understand Direct Sales Strategy and plans and participate in the achievement of objectives and targets</span></p><br></li><li><p><span>Implement Direct Sales policies and procedures</span></p><br></li><li><p><span>Handle e-mails and follow-up with customers concerning different requests/complaints ensuring fulfillment of their needs and requirements</span></p><br></li><li><p><span>Coordinate with billing and collection control to re-activate accounts / update account status to ensure up-to-date customer information at all times</span></p><br></li><li><p><span>Coordinate new outlets needs in terms of manpower, logistics, equipment, maintenance and other needs to ensure efficient launching and operations</span></p><br></li><li><p><span>Act as quality control on the Sales Representatives and report their failures to the Senior Sales Representative to tackle areas for development and training</span></p><br></li><li><p><span>Handle the opening of direct sales new branches and exchange offices and coordinate their needs&nbsp; in terms of manpower, logistics, equipment, policies and procedures, forms, brochures, marketing material and other needs to ensure efficient operations</span></p><br></li><li><p><span>Handle existing branches’ renovations/visit branches periodically to check maintenance requirements ensuring an adequate work environment for a healthy customer experience</span></p><br></li><li><p><span>Submit daily reports to direct report mentioning interventions and activities conducted and keep records of feedback/customer transactions and interactions as needed to track achievements and get recommendations</span></p><br></li><li><p><span># of non-compliance to direct sales policies and procedures</span></p><br></li><li><p><span>Average handling time (Time from initial customer request to closing the request)</span></p><br></li></ul> <br> <br><br> Education, experience and competencies <br> <p><b><span>Education</span></b></p><br><ul><li><p><span>Bachelor’s degree in a business administration-related field or equivalent</span></p><br></li></ul><p><b><span>Experience</span></b></p><br><ul><li><p><span>Up to 2 years of experience in related field</span></p><br></li></ul><p><b><span>Competencies</span></b></p><br><p><i><span>Behavioral</span></i></p><br><ul><li><p><span>Serving our Customers</span></p><br></li><li><p><span>Achievement Driven</span></p><br></li><li><p><span>Information Seeking</span></p><br></li><li><p><span>Relationship Building</span></p><br></li></ul><p><em><span>Technical</span></em></p><br><ul><li><p><span>Oral &amp; written Communication</span></p><br></li><li><p><span>Managing Information</span></p><br><p><span>Technology Application</span></p><br></li><li><p><span>IT user support</span></p><br></li><li><p><span>Sales Management</span></p><br></li></ul><p><span>IDE Competency</span></p><br><ul><li><p><span>Courage to Engage</span></p><br></li><li><p><span>Addressing Bias</span></p><br></li><li><p><span>Allyship</span></p><br></li></ul> <br> <br> </div>

<p><h4>About company</h4> <p>Belong, connect, grow, with KBR! The KBR team delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals. KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Job purpose</h4> <p>The scaffolding specialist is responsible for the safe planning, erection, inspection, maintenance, and dismantling of scaffolding systems to support ROO integrated projects activities under EPCm contract. This role ensures compliance with applicable international and ROO standards, specifications, and safety regulations while optimizing scaffold efficiency and project schedules within an engineering, procurement, and construction framework.</p> <h4>Job responsibilities</h4> <ul> <li><strong>Plan and supervise scaffold activities:</strong> Assess engineering drawings and method statements to determine scaffold type, layout, loads, and access requirements; develop task plans and risk assessments.</li> <li><strong>Erection & dismantling:</strong> Lead on-site erection, alteration, and dismantling of scaffolding structures in accordance with applicable standards and project procedures.</li> <li><strong>Inspection & quality control:</strong> Conduct routine inspections for stability, safety, and compliance; ensure tagging (e.g., safe/unsafe), maintenance, and corrective actions are documented.</li> <li><strong>Safety & compliance:</strong> Enforce site safety rules, use of PPE, and permit-to-work processes; coordinate with HSE for incident reporting and near-miss investigations.</li> <li><strong>Material management:</strong> Manage scaffolding materials, accessories, and consumables; ensure traceability, storage, and return of equipment.</li> <li><strong>Coordination & communication:</strong> Liaise with construction supervisors, engineers, and subcontractors to align scaffold activities with project milestones and work plans within brown field projects environment.</li> <li><strong>Problem solving:</strong> Identify and resolve technical issues related to scaffold design, load limits, or access constraints; recommend temporary works when necessary.</li> <li><strong>Documentation:</strong> Maintain accurate records including daily logs, inspection reports, load calculations, drawings (as-builts), and compliance certifications.</li> <li><strong>Training & mentorship:</strong> Provide on-site coaching to scaffold teams, ensuring proper techniques and safety practices are understood and followed. Contribute to the development of local workforce capabilities by identifying training needs and delivering hands-on guidance. Support ROO’s long-term localization strategy by fostering knowledge transfer, promoting sustainable skill development, and preparing local personnel for future leadership roles within scaffolding operations.</li> <li><strong>Continuous improvement:</strong> Propose and implement process improvements to enhance safety, efficiency, and cost-effectiveness.</li> </ul> <h4>Technical skills</h4> <ul> <li><strong>Scaffold systems knowledge:</strong> Experience with common systems (e.g., tube-and-couple, cuplock, frame/scaffold boards) and associated components; ability to tailor solutions to support ROO project requirements.</li> <li><strong>Engineering & load calculations:</strong> Interpret engineering drawings and perform basic structural load assessments and stability checks; competence in applying temporary works principles within ROO M&E projects framework.</li> <li><strong>Standards & codes:</strong> Familiarity with international and regional scaffolding standards (e.g., OSHA/EN/ISO equivalents) and client-specific procedures; awareness of project-specific QA/QC requirements.</li> <li><strong>Inspection & testing:</strong> Proficiency in scaffold inspections, tagging, acceptance criteria, and non-destructive testing basics as applicable to scaffolding of ROO M&E projects.</li> <li><strong>Tools & equipment:</strong> Proficiency with rigging gear, restraint systems, access towers, and fall protection equipment; ability to select appropriate equipment for complex job sites.</li> <li><strong>Quality & documentation:</strong> Strong documentation skills, including daily logs, checklists, load calculations, drawings (as-builts), and compliance certifications; use of document control practices.</li> <li><strong>Software (optional):</strong> Basic proficiency in drawing review tools, BIM coordination concepts, or project management software as used on site.</li> </ul> <h4>Soft skills</h4> <ul> <li><strong>Leadership & team management:</strong> Lead a diverse crew, delegate tasks, and maintain morale on demanding sites.</li> <li><strong>Communication:</strong> Clear, concise communication with supervisors, engineers, and field personnel; effective reporting and escalation when needed.</li> <li><strong>Problem-solving:</strong> Proactive in identifying risks and proposing practical mitigations.</li> <li><strong>Safety-first mindset:</strong> Demonstrated commitment to safety culture and incident prevention.</li> <li><strong>Adaptability:</strong> Flexibility to work in changing conditions, weather, and project needs.</li> <li><strong>Attention to detail:</strong> Meticulous in planning, inspections, and documentation.</li> <li><strong>Time management:</strong> Prioritization and organization to meet tight construction schedules.</li> </ul> <h4>Experience & qualifications</h4> <ul> <li><strong>Experience:</strong> Minimum of 12 years of relevant experience in scaffolding on large oil & gas, heavy industrial, or construction projects.</li> <li><strong>Education:</strong> Bachelor’s degree in engineering or a related field.</li> <li><strong>Licenses/certifications (preferred):</strong> <ul> <li>Scaffold erection/inspection certification (onshore/offshore as applicable)</li> <li>OSHA/NEBOSH/corresponding safety certifications</li> <li>Rigging/signalperson certifications or equivalent</li> </ul> </li> </ul> <h4>Work environment</h4> <ul> <li><strong>Site location:</strong> Basra, Iraq – Rumaila Field</li> <li><strong>Work schedule:</strong> Rotational schedule as dictated by project needs</li> <li><strong>Physical demands:</strong> On-site construction environment; standing, climbing, lifting, and exposure to outdoor conditions.</li> <li><strong>Safety & security:</strong> Compliance with KBR’s safety programs, security protocols, and Iraq-specific regulations; adherence to emergency procedures.</li> <li><strong>Travel:</strong> Occasional travel to other project sites or facilities as required.</li> <li><strong>Team structure:</strong> Reports to construction/scaffolding superintendent or site engineering lead; collaborates with construction crews, engineers, safety personnel, and subcontractors.</li> </ul> <h4>Additional information</h4> <p>This role requires stringent adherence to safety standards and quality expectations due to the critical nature of on-site scaffolding in a high-hazard brown field projects environment. The successful candidate will demonstrate a proven track record of delivering safe, compliant, and efficient scaffolding operations on complex projects.</p></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Job Purpose To provide administrative and executive oversight of the Unit’s activities, implement plans agreed upon with the Information Systems Department at Head Office, and participate in managing the establishment and development of the infrastructure required for the Bank’s information systems, including software, networks, and hardware.<br> The role also oversees the implementation of the Bank’s information technology policies and objectives by monitoring the preparation of plans related to computerization and automation of operations, developing an integrated information network within the Bank, enhancing organizational digital knowledge, and ensuring the readiness, efficiency, and continuous development of systems and applications in line with technological advancements.<br> Responsibilities Participate in developing policies and procedures for the Information Systems Unit – Iraq Branch, in line with the Bank’s direction in this field, and submit them to the Information Systems Department at Head Office.<br> Participate in setting the strategy and annual objectives of the Information Systems Unit – Iraq Branch in coordination with the Executive Director of the Information Systems Department at Head Office and the Chief Executive Officer – Iraq Branches.<br> Implement the approved strategy and annual objectives agreed upon with the Information Systems Department at Head Office and the CEO – Iraq Branches, within the agreed budget allocations.<br> Set objectives for subordinate staff based on the approved annual plan; provide administrative and operational supervision of the Unit and its employees; ensure work is performed efficiently and accurately; evaluate employee performance; and develop staff capabilities to enhance service quality.<br> Participate in identifying and selecting hardware, services, and systems used by the Bank; supervise and evaluate proposals and tenders submitted by external parties; conduct financial and technical analyses; provide recommendations; and forward them to the Information Systems Department at Head Office for review and submission to the authorized body or relevant committee.<br> Supervise and ensure that backup copies of information and data related to systems used within the Regional Management/Iraq Branch are regularly maintained to ensure business continuity.<br> Monitor current and future business and user requirements.<br> Coordinate with the Information Systems Department at Head Office to develop information systems at the Iraq Branch and oversee the establishment and development of the infrastructure required for managing the Bank’s information systems.<br> Periodically verify the effectiveness, integrity, continuity, and operational readiness of all information systems used by the Bank, including communication systems and operating systems within the Regional Management scope, and assess their ability to meet user requirements through the database documenting all reported faults and issues.<br> Forward observations and feedback from departments/divisions regarding automated systems to the Central Operations and International Trade Unit – Iraq Branch, as applicable, for review and onward submission to the Central Operations Department at Head Office.<br> Analyze and prepare reports on faults affecting communication systems, information systems, and ATMs, including corrective actions and root causes, and coordinate with the Information Systems Department at Head Office regarding such matters.<br> Ensure continuous awareness of developments in information systems to provide the most suitable solutions, systems, and services; ensure adherence to the latest confidentiality, security, and protection standards for information systems, devices, and networks to safeguard the Bank’s interests, in coordination with the Information Systems Department at Head Office.<br> Ensure that daily operations are conducted in accordance with approved policies, procedures, and delegated authorities.<br> Review executive and control reports, as well as internal and external audit reports according to their periodic schedules, and take the necessary actions in line with approved procedures to ensure proper execution of work and effective operational control.<br> Working Conditions and Environment Office-based work environment.<br> The position requires supervisory and managerial skills.<br> Specialized work in the field of information systems.<br> Requires the use of a computer equipped with the necessary systems and applications.<br> Communication and Working Relationships Daily verbal and written communication with the Executive Director – Information Systems Department at Head Office to provide updates on work developments and emerging matters.<br> Daily verbal, telephone, and written communication with subordinate staff to monitor work progress and resolve issues.<br> As needed, verbal, telephone, and written communication with relevant Head Office departments and branches to meet business requirements.<br> As needed, telephone and written communication with software and equipment vendors to meet operational needs.<br> Scope of Work and Authority Operates within defined and documented policies and procedures.<br> Serves as a member of Executive Management Committees in accordance with the approved committee formation regulations.<br> Bachelor’s degree in Computer Engineering, Software Engineering, or a related field.<br> Minimum of 8 years of relevant professional experience, including at least 4 years in a managerial position.<br> Proficiency in spoken and written English.<br> Proficiency in computer usage and working with implemented systems.<br> Thorough knowledge of various operating systems.<br> Thorough knowledge of networking systems and the systems used by the Bank.<br> Knowledge of supporting programming languages.<br> Comprehensive understanding of risks associated with electronic banking services.<br> Knowledge of database management.<br> Knowledge of banking laws and regulatory frameworks.<br> Knowledge of the regulations, instructions, and requirements of the Central Bank of Iraq.<br> Strong supervisory and managerial skills.<br> Strong analytical skills.<br> Planning and organizational abilities.<br> Ability to motivate others and work effectively within a team environment.<br> Thorough knowledge of internal and external policies, procedures, and their updates.<br> Strong communication and interpersonal skills.<br> Ability to work effectively under pressure.<br></span> </div>

<div><span style="font-size: 11px;"><b>Role Purpose</b></span></div><div><span style="font-size: 11px;">Zain Iraq is actively recruiting to hire&nbsp; Customer Service Representative, who are responsible for handling the day-to-day requests from customers and ensuring the resolution of complaints in an efficient and timely manner whilst ensuring a high level of customer satisfaction. The jobs are also responsible for direct interaction with current and potential customers within Zain IQ outlets with regards to sales or information on products/services.</span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;"><b>Responsibilities</b></span></div><div><span style="font-size: 11px;">Understand Direct Sales Strategy and plans and participate in the achievement of objectives and targets.</span></div><div><span style="font-size: 11px;">Implement Direct Sales policies and procedures.</span></div><div><span style="font-size: 11px;">Handle e-mails and follow-up with customers concerning different requests/complaints ensuring fulfilment of their needs and requirements.</span></div><div><span style="font-size: 11px;">Coordinate with billing and collection control to re-activate accounts/update account status to always ensure up-to-date customer information.</span></div><div><span style="font-size: 11px;">Coordinate with retention and complaints under CRM to resolve customer complaints about customer satisfaction and improvements opportunities.</span></div><div><span style="font-size: 11px;">Monitor re-activation of accounts/update account status with billing and collection control to always ensure up-to-date customer information.</span></div><div><span style="font-size: 11px;">Solve offers and new products and other issues and pitfalls to ensure timely resolution and customer satisfaction.</span></div><div><span style="font-size: 11px;">Submit daily reports to direct report mentioning interventions and activities conducted and keep records of feedbacks/customer transactions and interactions as needed to track achievements and get recommendations.</span></div><div><span style="font-size: 11px;">Education, Experience and Competencies</span></div><div><span style="font-size: 11px;">Bachelor’s degree in a business administration-related field or equivalent</span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">&nbsp;</span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;"><b>Experience</b></span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">Up to 2 years of experience in related field</span></div><div><br></div><div><span style="font-size: 11px;">Competencies</span></div><div><span style="font-size: 11px;">Behavioural</span></div><div><span style="font-size: 11px;">Serving our Customers</span></div><div><span style="font-size: 11px;">Achievement Driven</span></div><div><span style="font-size: 11px;">Information Seeking</span></div><div><span style="font-size: 11px;">Relationship Building</span></div><div><span style="font-size: 11px;">&nbsp;</span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">Technical</span></div><div><span style="font-size: 11px;">Oral Communication</span></div><div><span style="font-size: 11px;">Written Communication</span></div><div><span style="font-size: 11px;">Managing Information&nbsp;</span></div><div><span style="font-size: 11px;">Technology Application</span></div><div><span style="font-size: 11px;">IT User Support</span></div><div><span style="font-size: 11px;">Sales Management</span></div><div><br></div><div><span style="font-size: 11px;">DEI&nbsp; Competency</span></div><div><span style="font-size: 11px;">Courage to Engage</span></div><div><span style="font-size: 11px;">Addressing Bias</span></div><div><br></div>

<p>The post holder is responsible for the delivery of Ground Security training programs to the Response team through courses and workshops, ensuring that all Response Team Security staff are well-trained with weapons and basic tactics, incident responses and capable of performing their duties efficiently and safely. Additionally, ensuring that other airport workers and stakeholders receive requisite security training and briefings in accordance with mandated international security standards, as required. It includes weapon training and assisting in the conduct of 6-monthly range shoots for Response Team personnel, continuous assessment and improvement of security training procedures and implementing various training methods and best practice to develop and enhance staff skills and performance. All training must be compliant with the Regulatory requirements of ICAO Document 8973 Aviation Security, MOI ROE and the ICAA National Civil Aviation Security Training Program (NCASTP). A solid knowledge of performance management tools, techniques, and utilizing ‘state of the art’ technology, is vital, along with the ability to forge relationships with peers and customers. Key Areas of Responsibility: a) Regulatory requirements: Demonstrate excellent knowledge of all pertinent security regulations and standard operating procedures, the training requirements of the ICAO Document 8973 Security Manual, the ICAA National Civil Aviation Security Training Program (NCASTP) and the MOI Rules of Engagement. b) Lesson Plans & Courses : Assist in the development, and then deliver comprehensive ground security Response training programs, including lesson plans, exercises and instructional materials for all identified training courses – specifically the core regulated security courses for a Response Team Security Officer (RSO), the supervisory and specialist courses for the experienced Response staff (RSS), incident management, Rules of Engagement and for all airport staff the General Security Awareness Training (GSAT) and customer service courses. Create and conduct training sessions on Response Team security protocols, procedures, and regulations. c) Course Preparation & Delivery : Organize and prepare all courses to international standards, quality checked against stated learning objectives, then delivered in the national language of Iraq or, when required, in English. (Ensure all courses, lesson plans, examinations and power point presentations are written in Arabic and English). d) On-Boarding Induction: Assist the HoS Security Training in the conduct of effective induction and orientation sessions for all new security hires. e) Weapon Training: Deliver basic Weapon Training modules to Ground Security Staff including: the safety and operation of weapons, ammunition, marksmanship, dry shooting training, basic tactics and Rules of Engagement. f) Range Shoots: Assist the HoS Response Team (QRF) (Range Conducting Officer), and Range Safety Officers in the conduct and supervision of the 6-monthly range shoots for all Response Team personnel. g) Incident Response Training: Educating staff on how to handle various security incidents, from minor infractions to serious breaches. h) Instructional Design: Apply instructional design methodologies to improve training effectiveness and job performance. i) Examinations: Ensure that all courses and examinations are delivered to the standard, content and required level of knowledge; that examination results are rigorously evaluated & appropriate remedial action initiated where necessary. j) Course Certification: Issue course certificates to successful candidates after course completion. k) Maintaining Records: Maintain accurate records of all training activities, certifications, and employee progress and ensure that staff and training records are properly filed and secured in accordance with Training Manual procedures. l) Methods: Deploy a wide variety of interactive and hands-on training methods, such as simulations and role playing, using visual exercises, varying incident scenarios, and both field and table top exercises, to make learning more engaging & practical. m) Workshops: Assist in organizing GNDSEC workshops and seminars to meet the practical aspects of training needs and staff development. n) Mentorship & On-the-Job training: Provide on-the-job training and mentorship to new staff, offering feedback and addressing areas of low performance. o) Assess and evaluate trainees: Monitor and assess the progress of trainees, providing feedback and guidance to ensure they meet the required standards. p) Maintain training materials: Update and maintain training materials to ensure they are current and effective. q) Currency: Keep current with the latest developments, training trends and industry best practices in airport operations, security regulations, and training methodologies to ensure that the training syllabuses are current and effective. r) Collaborate with stakeholders: Work with the HoS Security Training and with HoS Response, to ensure that training programs and courses meet organizational needs.</p><p>Education: Ground Security Instructor or equivalent, Ground Security Supervisor, Weapon Training Instructor, Managing Safely (IOSH) or equivalent, Protective Security Diploma or equivalent. Experience: Applicant should preferably have a military background. Minimum of 2 years in a Ground/Response Security training instructor role with domestic and/or international experience. Experience of operating in post conflict & multicultural environments. Minimum of 5 years working within an airport or site security establishment. Computer Skills: Knowledgeable in Microsoft Office suite (user´s perspective) and able to manage other specific project/management software, provided the adequate training. Language Skills (Eng., Arabic, other): Solid knowledge and command of written and spoken English (essential) and Arabic (essential). Training Requirements: Ability to deliver training in Protective Security in benign & post conflict environments. Behavioral Competencies: • Delivering Results & Fostering Ownership • Building Customer Value • Networking & Influencing Collaboratively • Leading Teams • Driving Change Technical Competencies: • Designing & executing Training Development syllabuses • Incident Management • Adult education and vocational training principles • Interpersonal & Instructor Skills • Knowledge of Regulations & Policies in the Security Field • Weapon Training Instructor skills</p>

<p>The Chief Engineer will be based at one of the Amentum sites in Iraq and serve the Operations and Maintenance Support Services (OMSS) contract in support of the U.S. Department of State.</p><p>The Chief Engineer is responsible for all water purification, water storage, water distribution and wastewater treatments, as well as generators, and associated power generation, transmission and distribution equipment.</p><p>The Chief Engineer is also responsible for the safe operation and maintenance of power plants, generators, compressors, air conditioning systems, etc., and operates industrial machinery and equipment in various forms.</p><p>The duties and responsibilities listed are representative of the nature and level of work assigned and are not necessarily all inclusive.</p><p><b><br></b></p><p><b>DUTIES:</b></p><ul><li>Responsible for maintaining a safe workplace and ensuring safety is the highest priority in the workplace.</li><li>Comply with all Environmental &amp; Safety and Quality Assurance requirements and goals.</li><li>Provide information and materials to these divisions as necessary to ensure adequate and legal documentation.</li><li>Responsible for managing, monitoring and tracking physical plant and building operations services.</li><li>Supervise and oversee the operations of the water and wastewater treatment plants to include all water quality laboratory, pumping, filtering, piping and control systems.</li><li>Ensure the viability, availability and safety of water treatment and waste distribution systems.</li><li>Maintain water well operations and water storage systems.</li><li>Manage water treatment waste stream to contractual standards.</li><li>Oversee the: Prime power and water/wastewater treatment programs; Operation, calibration, diagnostics, troubleshooting and repairs to all mechanical, electrical equipment systems and electrical/pneumatic control systems.</li><li>Preventative maintenance, condition monitoring, repair, installation and modernization of all power generation, transmission and distribution equipment on site; and Support of prime power generators made by Caterpillar, Cummins, Perkins, FG Wilson and other manufacturers, with outputs ranging from 20KW up to 160KW.</li><li>Provide daily guidance and direction to supervisors, operators, mechanics and technicians.</li><li>Perform scheduled and unscheduled inspections.</li><li>Report any malfunctions or lack of compliance with SOW to the Chief Engineer.</li><li>Assist in developing the SOW when requested, including diagrams and specifications in compliance with Overseas Building Operations (OBO), Environmental Protection Agency (EPA), Occupational Safety and Health Administration (OSHA) and National electric Code (NEC) standards.</li><li>Maintain effective, timely and respectful communication and interaction with other employees and managers and support other organizations.</li><li>Perform administrative tasks including ordering material, inventorying and scheduling work.</li><li>Manage logistics, stock levels and workflow processes.</li><li>Collect, analyze and summarize data for report preparation and submit written reports.</li><li>Maintain appropriate technical library and record keeping, which documents all procedures necessary to accomplish assigned responsibilities.</li><li>Responsible for facility custodianship of work area and management of tools, equipment and spare parts.</li><li>Take initiative to analyze situations and make frequent technical decisions based on specifications, safety and electrical codes.</li><li>Evaluate operational effectiveness and develop/maintain effective operational control mechanisms.</li><li>Responsible for allocating and managing staff resources according to changing needs</li><li>Identify problem areas and respond to mission requirements to perform task order requirements.</li><li>Plan and manage projects.</li><li>Control resources; monitor staff proficiency and qualifications; monitor the locations and activities of assets; and coordinate the flow of information to and from O&amp;M staff and USG representatives.</li><li>Resolve physical plant and building operations issues.</li><li>Provide professional engineering guidance for all future work and technical proposals and will be responsible for drafting and presenting reports and analysis of system performance and recommendations for improvement.</li><li>Interpret all architectural, civil, structural, mechanical, electrical, plumbing, and fire system diagrams or drawings for large facilities.</li><li>Continually interface with Department of State Facility Management personnel in order to coordinate the work being completed on the equipment systems within the Utilities section and brief the customer during meetings and site surveys.</li><li>Perform additional duties and projects as assigned.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><br></li></ul>

<p>We are seeking a Senior QA Lead to oversee quality assurance activities, testing strategy, and release quality management across software development initiatives. The role will be responsible for leading QA teams, establishing testing frameworks, improving test automation practices, and ensuring that software releases meet quality standards before deployment to production environments.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Minimum 4 years of experience in software development and quality assurance, including at least 2 years in QA-focused roles.</li><li>Strong understanding of Software Development Life Cycle (SDLC) and Software Testing Life Cycle (STLC).</li><li>Experience leading QA activities across web and mobile application projects.</li><li>Hands-on experience with:<ul><li>Functional Testing</li><li>Regression Testing</li><li>Smoke Testing</li><li>Sanity Testing</li><li>API Testing</li><li>Integration Testing</li><li>User Acceptance Testing (UAT)</li><li>Security Testing</li></ul></li><li>Experience creating test plans, test scenarios, and test cases.</li><li>Experience managing defects and bug tracking processes.</li><li>Experience with Jira or similar test and project management tools.</li><li>Experience reviewing automation scripts.</li><li>Understanding of CI/CD concepts.</li><li>Experience using AI-assisted tools for test case generation, log analysis, test coverage review, or QA documentation improvement.</li><li>Experience with API Testing and Integration Testing.</li><li>Good understanding of basic Security Testing principles.</li><li>Experience leading and managing QA teams.</li><li>Ability to design and implement a comprehensive Test Strategy.</li><li>Understanding of database fundamentals and the ability to read and validate data to verify test results.</li><li>Ability to prioritize and manage defects based on Severity and Priority.</li><li>Preferred Qualifications<ul><li>Experience working on government, enterprise, or large-scale institutional systems.</li><li>Experience with .NET-based applications and environments.</li><li>Experience designing and establishing QA processes from the ground up.</li><li>Experience performing Performance Testing.</li></ul></li><li>Other Qualifications<ul><li>Bachelor's degree in Computer Science, Software Engineering, Information Technology, or a related field.</li><li>Strong leadership and team management skills.</li><li>Excellent communication skills with technical and non-technical stakeholders.</li><li>Strong documentation and reporting skills.</li><li>High attention to detail and quality standards.</li></ul></li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are looking for the right people people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world s largest providers of products and services to the global energy industry. Job Duties The Asset Manager is accountable for the overall management, performance, and value delivery of an oil and gas asset operated under an integrated asset management (IAM) production enhancement contract. Acting as the single point of accountability to the client, the Asset Manager leads a multi-discipline service and technical team to optimize production, manage field development, and ensure safe, efficient, and sustainable operations in alignment with the client s strategic and commercial objectives. Under broad direction: Provide overall leadership in the execution of the asset s integrated management plan to achieve agreed production, cost, and HSE performance targets. Leads and directs multi-discipline asset teams comprised of production operations, maintenance, facilities engineering, subsurface, drilling, HSE, and supply chain. Drive daily and long-term production optimization through coordination of field &amp; well operations, subsurface, drilling, projects, and maintenance teams. Identify and manage operational and contractual risks to safeguard asset value and business performance. Leads and directs multi-discipline asset teams in planning and execution of large scale field development/re-development programs and production operations in partnership with our clients under especially challenging conditions (such as foreign assignment) to maximize the value of oil and gas assets and projects. Responsible for financial performance (P/L) of assigned assets through effective planning, organizing, management of resources, and application of value- adding technologies. Serves as the primary interface with partners for project operations and represents the Company in technical and commercial matters. Ensures the technical quality of work prepared under their supervision and administers contract provisions related to execution of work. ob role contributes directly to value creation through cost control, technical innovation, increased production and improved recovery of hydrocarbon reserves. Job role has budgetary accountabilities or directly impacts a revenue center's viability or its quality of service via personal contributions.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Halliburton is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation .</p><p></p></section>

<p><h4>Essential responsibilities:</h4> <p>Aerostat operators/user-level maintainers will participate in the overall, hands-on operation of the aerostat system including launch, in-flight, recovery, and moored activities.</p> <p>Candidates will perform all functions to operate the PGSS/PTDS, an aerostat mounted Intelligence, Surveillance, and Reconnaissance (ISR) platform, its Mobile Mooring Platform (MMP), sensor payload(s), communications and navigation systems as well as associated support equipment (boom lift, forklift, all terrain vehicles (ATVs), and electrical power generators).</p> <p>Candidate will perform user-level maintenance functions including performing hands-on preventative maintenance checks and services (PMCS), troubleshooting, removing and replacing line replaceable units (LRUs), and removing and replacing payloads.</p> <p>Candidate must possess a diverse range of skills with the ability to quickly adapt to new situations. Tasks will be performed under direction of higher classified technicians and/or site personnel.</p> <h4>Minimum requirements:</h4> <ul> <li>High school diploma or equivalent is required.</li> <li>Two-year associate’s degree in a technical field from an accredited college can substitute for work experience.</li> <li>Must have an active secret US government clearance. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must have a valid U.S. passport with a minimum of one year remaining.</li> <li>Must have valid US driver's license.</li> <li>Knowledge of and experience in the operations of hardware systems and components.</li> <li>Experience in fault detection, isolation, and correction of hardware systems and individual components.</li> <li>Ability to perform routine system maintenance and analysis functions including: hardware configurations; adding, removing and replacing hardware components; use of hardware and software diagnostic testing tools; reading of electronic circuit schematics; and repairing printed circuit boards.</li> <li>At least one (1) year previous aerostat experience OR two (2) years of experience in the following areas may be substituted in lieu of aerostat experience:</li> </ul> <p><strong>1) Electrical Maintenance Mechanic</strong></p> <ul> <li>Possess at least two (2) years aerostat experience as an operator at the 20 series level or greater from Army MOS 35F (Intelligence Analyst), 35G (Geospatial Intelligence Imagery Analyst), 35H (Common Ground System Analyst), 96R (Ground Surveillance Systems Operator), 96U (Unmanned Aerial Vehicle Operator), or military branch equivalent.</li> <li>Two years of hands-on experience in performing operations and maintenance tasks either on an aerostat system or a related industry/military equivalent is required.</li> <li>Must be qualified at the 10 series or greater level (via military or civilian technical schools) is required.</li> <li>Ability to read electronic schematics.</li> <li>O&M of electro-mechanical equipment to include one or more of the following: hydraulic/servo valves, hydraulic actuators, control systems, test and diagnostic equipment.</li> </ul> <p><strong>2) Networking, IT & information systems</strong></p> <ul> <li>Two years’ experience is required.</li> <li>Must be qualified at the 10 series or greater level; MOS 25B/F or other military branch equivalent or industry occupational specialties as a CISCO network administrator; Army MOS 25L/N or other military branch equivalent or industry occupational specialties as a network installation (BICSI or Network+ or Comp T certification) will be considered.</li> <li>CCIE certification with fiber optic certification is preferred.</li> </ul> <p><strong>3) Mechanical Maintenance</strong></p> <ul> <li>Mechanical maintenance with qualifications at the 10 series or greater from U.S. Army MOS 94D/X and 91/B/S/W or other military branch equivalent, or industry occupational specialties such as National Institute for Automotive Service Excellence (ASE) certified truck mechanic or Federal Aviation Administration (FAA) general mechanic 1 or greater.</li> <li>Two years of hands-on experience on an aerostat system or a related industry/military equivalent is required.</li> <li>O&M of mechanical equipment to include one or more of the following: hydraulic systems, winch systems, tether/cable handling systems, industrial generator sets, power switch gear, HVAC, cranes aerial lift, forklift, industrial generator sets.</li> </ul> <h4>Physical requirements:</h4> <ul> <li>Requires the ability to regularly lift up to 50 lbs.</li> <li>Requires the ability to regularly climb extension ladders, roof ladder, stepladders, and stairs at least 10 times during shift.</li> <li>Requires the flexibility to bend/stoop, squat repetitive during shift.</li> <li>Requires the ability to regularly kneel repetitive for shift.</li> <li>Requires the ability to move in a 90-degree fashion on a repetitive basis for shift.</li> <li>Requires the ability to stretch/reach on a repetitive basis for shift.</li> <li>Requires the ability to walk extensively throughout the plant during shift.</li> <li>Requires the ability to interact with all clients in a professional and friendly manner despite periods of stress.</li> </ul> <h4>Medical requirements:</h4> <ul> <li>Successfully complete and pass the medical and dental examinations as required by employer and customer for deployment to Iraq.</li> <li>Must maintain physical and dental requirements for the duration of the deployment.</li> </ul> <h4>Working and living conditions:</h4> <p>This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environment. Temperatures can reach 120-130 degrees Fahrenheit/50-55 degrees Celsius during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to CENTCOM, EUCOM, and AFRICOM for extended periods. Work schedules are a minimum of 6 days per week and 10 hours per day, while some jobs have higher daily and weekly minimums.</p></p><p></p>

<p><h4>Essential responsibilities:</h4> <p>Aerostat operators/user-level maintainers will participate in the overall, hands-on operation of the aerostat system including launch, in-flight, recovery, and moored activities.</p> <p>Candidates will perform all functions to operate the Persistent Ground Surveillance System (PGSS) and Persistent Threat Detection System (PTDS), an aerostat-mounted intelligence, surveillance, and reconnaissance (ISR) platform, its mobile mooring platform (MMP), sensor payload(s), communications and navigation systems, as well as associated support equipment (boom lift, forklift, all-terrain vehicles (ATVs), and electrical power generators).</p> <p>Candidates will perform user-level maintenance functions including performing hands-on preventative maintenance checks and services (PMCS), troubleshooting, removing and replacing line replaceable units (LRUs), and removing and replacing payloads.</p> <p>Candidates must possess a diverse range of skills with the ability to quickly adapt to new situations. Tasks will be performed under the direction of higher classified technicians and/or site personnel.</p> <h4>Minimum requirements:</h4> <ul> <li>High school diploma or equivalent is required.</li> <li>Two-year associate’s degree in a technical field from an accredited college can substitute for work experience.</li> <li>Must have an active secret US government clearance. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must have a valid U.S. passport with a minimum of one year remaining.</li> <li>Must have a valid US driver’s license.</li> <li>Knowledge of and experience in the operations of hardware systems and components.</li> <li>Experience in fault detection, isolation, and correction of hardware systems and individual components.</li> <li>Ability to perform routine system maintenance and analysis functions including hardware configurations; adding, removing, and replacing hardware components; use of hardware and software diagnostic testing tools; reading of electronic circuit schematics; and repairing printed circuit boards.</li> <li>At least one (1) year previous aerostat experience OR two (2) years of experience in the following areas may be substituted in lieu of aerostat experience: <ul> <li><strong>Electrical maintenance mechanic:</strong> Possess at least two (2) years aerostat experience as an operator at the 20 series level or greater from Army MOS 35F (Intelligence Analyst), 35G (Geospatial Intelligence Imagery Analyst), 35H (Common Ground System Analyst), 96R (Ground Surveillance Systems Operator), 96U (Unmanned Aerial Vehicle Operator), or military branch equivalent. Two years of hands-on experience in performing operations and maintenance tasks either on an aerostat system or a related industry/military equivalent is required. Must be qualified at the 10 series or greater level (via military or civilian technical schools). Ability to read electronic schematics. O&M of electro-mechanical equipment to include one or more of the following: hydraulic/servo valves, hydraulic actuators, control systems, test and diagnostic equipment.</li> <li><strong>Networking, IT & information systems:</strong> Two years’ experience is required. Must be qualified at the 10 series or greater level; MOS 25B/F or other military branch equivalent or industry occupational specialties as a CISCO network administrator; Army MOS 25L/N or other military branch equivalent or industry occupational specialties as a network installation (BICSI or Network+ or CompTIA certification) will be considered. CCIE certification with fiber optic certification is preferred.</li> <li><strong>Mechanical maintenance:</strong> Mechanical maintenance with qualifications at the 10 series or greater from U.S. Army MOS 94D/X and 91/B/S/W or other military branch equivalent, or industry occupational specialties such as National Institute for Automotive Service Excellence (ASE) Certified Truck Mechanic or Federal Aviation Administration (FAA) General Mechanic 1 or greater. Two years of hands-on experience on an aerostat system or a related industry/military equivalent is required. O&M of mechanical equipment to include one or more of the following: hydraulic systems, winch systems, tether/cable handling systems, industrial generator sets, power switch gear, HVAC, cranes, aerial lift, forklift, industrial generator sets.</li> </ul> </li> </ul> <h4>Physical requirements:</h4> <ul> <li>Requires the ability to regularly lift up to 50 lbs.</li> <li>Requires the ability to regularly climb extension ladders, roof ladders, stepladders, and stairs at least 10 times during shift.</li> <li>Requires the flexibility to bend/stoop and squat repetitively during shift.</li> <li>Requires the ability to regularly kneel repetitively during shift.</li> <li>Requires the ability to move in a 90-degree fashion on a repetitive basis during shift.</li> <li>Requires the ability to stretch/reach on a repetitive basis during shift.</li> <li>Requires the ability to walk extensively throughout the plant during shift.</li> <li>Requires the ability to interact with all clients in a professional and friendly manner despite periods of stress.</li> </ul> <h4>Medical requirements:</h4> <ul> <li>Successfully complete and pass the medical and dental examinations as required for deployment.</li> <li>Must maintain physical and dental requirements for the duration of the deployment.</li> </ul> <h4>Working and living conditions:</h4> <p>This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environments. Temperatures can reach 120-130 degrees Fahrenheit (50-55 degrees Celsius) during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to CENTCOM, EUCOM, and AFRICOM for extended periods. Work schedules are a minimum of six days per week and ten hours per day, while some jobs have higher daily and weekly minimums.</p></p><p></p>

<p><h4>Essential responsibilities:</h4> <p>Aerostat operators/user-level maintainers will participate in the overall, hands-on operation of the aerostat system including launch, in-flight, recovery, and moored activities.</p> <p>Candidates will perform all functions to operate the PGSS/PTDS, an aerostat mounted Intelligence, Surveillance, and Reconnaissance (ISR) platform, its Mobile Mooring Platform (MMP), sensor payload(s), communications and navigation systems as well as associated support equipment (boom lift, forklift, all terrain vehicles (ATVs), and electrical power generators).</p> <p>Candidate will perform user-level maintenance functions including performing hands-on preventative maintenance checks and services (PMCS), troubleshooting, removing and replacing line replaceable units (LRUs), and removing and replacing payloads.</p> <p>Candidate must possess a diverse range of skills with the ability to quickly adapt to new situations. Tasks will be performed under direction of higher classified technicians and/or site personnel.</p> <h4>Minimum requirements:</h4> <ul> <li>High school diploma or equivalent is required.</li> <li>Two-year associate’s degree in a technical field from an accredited college can substitute for work experience.</li> <li>Must have an active secret US government clearance. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must have a valid U.S. passport with a minimum of one year remaining.</li> <li>Must have valid US driver’s license.</li> <li>Knowledge of and experience in the operations of hardware systems and components.</li> <li>Experience in fault detection, isolation, and correction of hardware systems and individual components.</li> <li>Ability to perform routine system maintenance and analysis functions including: hardware configurations; adding, removing and replacing hardware components; use of hardware and software diagnostic testing tools; reading of electronic circuit schematics; and repairing printed circuit boards.</li> <li>At least one (1) year previous aerostat experience OR two (2) years of experience in the following areas may be substituted in lieu of aerostat experience:</li> </ul> <h4>1) Electrical maintenance mechanic</h4> <ul> <li>Possess at least two (2) years aerostat experience as an operator at the 20 series level or greater from Army MOS 35F (Intelligence Analyst), 35G (Geospatial Intelligence Imagery Analyst), 35H (Common Ground System Analyst), 96R (Ground Surveillance Systems Operator), 96U (Unmanned Aerial Vehicle Operator), or military branch equivalent.</li> <li>Two years of hands-on experience in performing operations and maintenance tasks either on an aerostat system or a related industry/military equivalent is required.</li> <li>Must be qualified at the 10 series or greater level (via military or civilian technical schools) is required.</li> <li>Ability to read electronic schematics.</li> <li>O&M of electro-mechanical equipment to include one or more of the following: <ul> <li>Hydraulic/servo valves</li> <li>Hydraulic actuators, control systems</li> <li>Test and diagnostic equipment</li> </ul> </li> </ul> <h4>2) Networking, IT & information systems</h4> <ul> <li>Two years’ experience is required.</li> <li>Must be qualified at the 10 series or greater level; MOS 25B/F or other military branch equivalent or industry occupational specialties as a CISCO network administrator; Army MOS 25L/N or other military branch equivalent or industry occupational specialties as a network installation (BICSI or Network+ or Comp T certification) will be considered.</li> <li>CCIE certification with fiber optic certification is preferred.</li> </ul> <h4>3) Mechanical maintenance</h4> <ul> <li>Mechanical maintenance with qualifications at the 10 series or greater from U.S. Army MOS 94D/X and 91/B/S/W or other military branch equivalent, or industry occupational specialties such as National Institute for Automotive Service Excellence (ASE) certified truck mechanic or Federal Aviation Administration (FAA) general mechanic 1 or greater.</li> <li>Two years of hands-on experience on an aerostat system or a related industry/military equivalent is required.</li> <li>O&M of mechanical equipment to include one or more of the following: hydraulic systems, winch systems, tether/cable handling systems, industrial generator sets, power switch gear, HVAC, cranes aerial lift, forklift, industrial generator sets.</li> </ul> <h4>Physical requirements:</h4> <ul> <li>Requires the ability to regularly lift up to 50 lbs.</li> <li>Requires the ability to regularly climb extension ladders, roof ladder, stepladders, and stairs at least 10 times during shift.</li> <li>Requires the flexibility to bend/stoop, squat repetitive during shift.</li> <li>Requires the ability to regularly kneel repetitive for shift.</li> <li>Requires the ability to move in a 90-degree fashion on a repetitive basis for shift.</li> <li>Requires the ability to stretch/reach on a repetitive basis for shift.</li> <li>Requires the ability to walk extensively throughout the plant during shift.</li> <li>Requires the ability to interact with all clients in a professional and friendly manner despite periods of stress.</li> </ul> <h4>Medical requirements</h4> <ul> <li>Successfully complete and pass the medical and dental examinations as required for deployment.</li> <li>Must maintain physical and dental requirements for the duration of the deployment.</li> </ul> <h4>Working and living conditions:</h4> <p>This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environment. Temperatures can reach 120-130 degrees Fahrenheit (50-55 degrees Celsius) during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to CENTCOM, EUCOM, and AFRICOM for extended periods. Work schedules are a minimum of 6 days per week and 10 hours per day, while some jobs have higher daily and weekly minimums.</p></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Job Purpose To provide administrative and executive oversight of the Unit s activities, implement plans agreed upon with the Information Systems Department at Head Office, and participate in managing the establishment and development of the infrastructure required for the Bank s information systems, including software, networks, and hardware. The role also oversees the implementation of the Bank s information technology policies and objectives by monitoring the preparation of plans related to computerization and automation of operations, developing an integrated information network within the Bank, enhancing organizational digital knowledge, and ensuring the readiness, efficiency, and continuous development of systems and applications in line with technological advancements. Responsibilities Participate in developing policies and procedures for the Information Systems Unit Iraq Branch, in line with the Bank s direction in this field, and submit them to the Information Systems Department at Head Office. Participate in setting the strategy and annual objectives of the Information Systems Unit Iraq Branch in coordination with the Executive Director of the Information Systems Department at Head Office and the Chief Executive Officer Iraq Branches. Implement the approved strategy and annual objectives agreed upon with the Information Systems Department at Head Office and the CEO Iraq Branches, within the agreed budget allocations. Set objectives for subordinate staff based on the approved annual plan; provide administrative and operational supervision of the Unit and its employees; ensure work is performed efficiently and accurately; evaluate employee performance; and develop staff capabilities to enhance service quality. Participate in identifying and selecting hardware, services, and systems used by the Bank; supervise and evaluate proposals and tenders submitted by external parties; conduct financial and technical analyses; provide recommendations; and forward them to the Information Systems Department at Head Office for review and submission to the authorized body or relevant committee. Supervise and ensure that backup copies of information and data related to systems used within the Regional Management/Iraq Branch are regularly maintained to ensure business continuity. Monitor current and future business and user requirements. Coordinate with the Information Systems Department at Head Office to develop information systems at the Iraq Branch and oversee the establishment and development of the infrastructure required for managing the Bank s information systems. Periodically verify the effectiveness, integrity, continuity, and operational readiness of all information systems used by the Bank, including communication systems and operating systems within the Regional Management scope, and assess their ability to meet user requirements through the database documenting all reported faults and issues. Forward observations and feedback from departments/divisions regarding automated systems to the Central Operations and International Trade Unit Iraq Branch, as applicable, for review and onward submission to the Central Operations Department at Head Office. Analyze and prepare reports on faults affecting communication systems, information systems, and ATMs, including corrective actions and root causes, and coordinate with the Information Systems Department at Head Office regarding such matters. Ensure continuous awareness of developments in information systems to provide the most suitable solutions, systems, and services; ensure adherence to the latest confidentiality, security, and protection standards for information systems, devices, and networks to safeguard the Bank s interests, in coordination with the Information Systems Department at Head Office. Ensure that daily operations are conducted in accordance with approved policies, procedures, and delegated authorities. Review executive and control reports, as well as internal and external audit reports according to their periodic schedules, and take the necessary actions in line with approved procedures to ensure proper execution of work and effective operational control. Working Conditions and Environment Office-based work environment. The position requires supervisory and managerial skills. Specialized work in the field of information systems. Requires the use of a computer equipped with the necessary systems and applications. Communication and Working Relationships Daily verbal and written communication with the Executive Director Information Systems Department at Head Office to provide updates on work developments and emerging matters. Daily verbal, telephone, and written communication with subordinate staff to monitor work progress and resolve issues. As needed, verbal, telephone, and written communication with relevant Head Office departments and branches to meet business requirements. As needed, telephone and written communication with software and equipment vendors to meet operational needs. Scope of Work and Authority Operates within defined and documented policies and procedures. Serves as a member of Executive Management Committees in accordance with the approved committee formation regulations.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor's degree in Computer Engineering, Software Engineering, or a related field.</li><li>Minimum of 8 years of relevant professional experience, including at least 4 years in a managerial position.</li><li>Proficiency in spoken and written English.</li><li>Proficiency in computer usage and working with implemented systems.</li><li>Thorough knowledge of various operating systems.</li><li>Thorough knowledge of networking systems and the systems used by the Bank.</li><li>Knowledge of supporting programming languages.</li><li>Comprehensive understanding of risks associated with electronic banking services.</li><li>Knowledge of database management.</li><li>Knowledge of banking laws and regulatory frameworks.</li><li>Knowledge of the regulations, instructions, and requirements of the Central Bank of Iraq.</li><li>Strong supervisory and managerial skills.</li><li>Strong analytical skills.</li><li>Planning and organizational abilities.</li><li>Ability to motivate others and work effectively within a team environment.</li><li>Thorough knowledge of internal and external policies, procedures, and their updates.</li><li>Strong communication and interpersonal skills.</li><li>Ability to work effectively under pressure.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Aerostat Operators provide Operations and Sustainment (O&amp;S) support for the Persistent Surveillance Systems Tethered (PSS-T) program in OCONUS site locations. PSS-T is comprised of former Persistent Ground Surveillance System (PGSS) and Persistent Threat Detection System (PTDS) programs. Position will require 6-week 34M training TDY to Elizabeth City, South Carolina. Essential Responsibilities: Aerostat Operators/User-level maintainers will participate in the overall, hands-on operation of the aerostat system including launch, in-flight, recovery, and moored activities. Candidates will perform all functions to operate the PGSS/PTDS, an aerostat mounted Intelligence, Surveillance, And Reconnaissance (ISR) platform, its Mobile Mooring Platform (MMP), Sensor Payload(s), communications and navigation systems as well as associated support equipment (Boom Lift, Forklift, All Terrain Vehicles (ATV's), and Electrical Power Generators). Candidate will perform User-level maintenance functions include performing hands-on Preventative Maintenance Checks and Services (PMCS), troubleshooting, removing and replacing Line Replaceable Units (LRUs), and removing and replacing payloads. Candidate must possess a diverse range of skills with the ability to quickly adapt to new situations. Tasks will be performed under direction of higher classified technicians and/or site personnel.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>High school diploma or equivalent is required.</li><li>Two-year Associate s degree in a technical field from an accredited college can substitute for work experience.</li><li>Must have an active Secret US Government Clearance. Note: US Citizenship is required to obtain a Secret Clearance.</li><li>Must have a valid U.S. passport with a minimum of one year remaining.</li><li>Must have valid US Driver's license.</li><li>Knowledge of and experience in the operations of hardware systems and components.</li><li>Experience in fault detection, isolation, and correction of hardware systems and individual components.</li><li>Ability to perform routine system maintenance and analysis functions including: hardware configurations; adding, removing and replacing hardware components; use of hardware and software diagnostic testing tools; reading of electronic circuit schematics; and repairing printed circuit boards.</li><li>At least one (1) year previous Aerostat experience OR two (2) years of experience in the following areas may be substituted in lieu of aerostat experience:</li><ul><li>1) Electrical Maintenance Mechanic Possess at least two (2) year s aerostat experience as an operator at the 20 series level or greater from Army MOS 35F (Intelligence Analyst), 35G (Geospatial Intelligence Imagery Analyst), 35H (Common Ground System Analyst), 96R (Ground Surveillance Systems Operator), 96U (Unmanned Aerial Vehicle Operator), or military branch equivalent. Two years of hands-on experience in performing operations and maintenance tasks either on an AEROSTAT system or a related industry/military equivalent is required. Must be qualified at the 10 series or greater level (via military or civilian technical schools) is required. Ability to read electronic schematics. O&amp;M of electro-mechanical equipment to include one or more of the following: Hydraulic/servo valves Hydraulic actuators, control systems Test and diagnostic equipment</li><li>2) Networking, IT &amp; information systems Two years experience is required. Must be qualified at the 10 series or greater level; MOS 25B/F or other military branch equivalent or industry occupational specialties as a CISCO Network Administrator; Army MOS 25L/N or other military branch equivalent or industry occupational specialties as a Network Installation (BICSI or Network + or Comp T Certification) will be considered. CCIE certification with fiber optic certification is preferred.</li><li>3) Mechanical Maintenance Mechanical Maintenance with qualifications at the 10 series or greater from U.S. Army MOS 94D/X and 91/B/S/W or other military branch equivalent, or industry occupational specialties such National Institute for Automotive Service Excellence (ASE) Certified Truck Mechanic or Federal Aviation Administration (FAA) General Mechanic 1 or greater. Two years of hands-on experience on an AEROSTAT system or a related industry/military equivalent is required. O&amp;M of mechanical equipment to include one or more of the following: Hydraulic systems, Winch systems, Tether/cable handling systems, Industrial generator sets, Power switch gear, HVAC, Cranes Aerial lift , Forklift , Industrial generator sets</li></ul><li>Physical Requirements: Requires the ability to regularly lift up to 50 lbs. Requires the ability to regularly climb extension ladders, roof ladder, stepladders, and stairs at least 10 times during shift. Requires the flexibility to bend/stoop, squat repetitive during shift. Requires the ability to regularly kneel repetitive for shift. Requires the ability to move in a 90-degree fashion on a repetitive basis for shift. Requires the ability to stretch/reach on a repetitive basis for shift. Requires the ability to walk extensively throughout the plant during shift. Requires the ability to interact with all clients in a professional and friendly manner despite periods of stress.</li><li>Medical Requirements Successfully complete and pass the medical and dental examinations as required by Amentum and our customer for deployment to Iraq. Must maintain physical and dental requirements for the duration of the deployment.</li><li>Working and Living Conditions: This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environment. Temperatures can reach PHONE_NUMBER degrees Fahrenheit/50-55 degrees Celsius during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to CENTCOM, EUCOM, and AFRICOM for extended periods. Work schedules are a minimum of 6 days per week and 10 hours per day, while some jobs have higher daily and weekly minimums.</li></ul><p></p></section>

<p><h4>Essential responsibilities:</h4> <p>Aerostat operators and user-level maintainers will participate in the overall, hands-on operation of the aerostat system including launch, in-flight, recovery, and moored activities.</p> <p>Candidates will perform all functions to operate the Persistent Ground Surveillance System (PGSS) and Persistent Threat Detection System (PTDS), an aerostat-mounted intelligence, surveillance, and reconnaissance (ISR) platform, its mobile mooring platform (MMP), sensor payload(s), communications and navigation systems, as well as associated support equipment such as boom lift, forklift, all-terrain vehicles (ATVs), and electrical power generators.</p> <p>Candidates will perform user-level maintenance functions including performing hands-on preventative maintenance checks and services (PMCS), troubleshooting, removing and replacing line replaceable units (LRUs), and removing and replacing payloads.</p> <p>Candidates must possess a diverse range of skills with the ability to quickly adapt to new situations. Tasks will be performed under the direction of higher classified technicians and/or site personnel.</p> <h4>Minimum requirements:</h4> <ul> <li>High school diploma or equivalent is required.</li> <li>Two-year associate’s degree in a technical field from an accredited college can substitute for work experience.</li> <li>Must have an active secret US government clearance. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must have a valid U.S. passport with a minimum of one year remaining.</li> <li>Must have a valid US driver’s license.</li> <li>Knowledge of and experience in the operations of hardware systems and components.</li> <li>Experience in fault detection, isolation, and correction of hardware systems and individual components.</li> <li>Ability to perform routine system maintenance and analysis functions including hardware configurations; adding, removing and replacing hardware components; use of hardware and software diagnostic testing tools; reading of electronic circuit schematics; and repairing printed circuit boards.</li> <li>At least one year previous aerostat experience or two years of experience in the following areas may be substituted in lieu of aerostat experience:</li> </ul> <h4>1) Electrical maintenance mechanic</h4> <ul> <li>Possess at least two years aerostat experience as an operator at the 20 series level or greater from Army MOS 35F (Intelligence Analyst), 35G (Geospatial Intelligence Imagery Analyst), 35H (Common Ground System Analyst), 96R (Ground Surveillance Systems Operator), 96U (Unmanned Aerial Vehicle Operator), or military branch equivalent.</li> <li>Two years of hands-on experience in performing operations and maintenance tasks either on an aerostat system or a related industry/military equivalent is required.</li> <li>Must be qualified at the 10 series or greater level (via military or civilian technical schools).</li> <li>Ability to read electronic schematics.</li> <li>Operations and maintenance of electro-mechanical equipment to include one or more of the following: <ul> <li>Hydraulic/servo valves</li> <li>Hydraulic actuators, control systems</li> <li>Test and diagnostic equipment</li> </ul> </li> </ul> <h4>2) Networking, IT and information systems</h4> <ul> <li>Two years’ experience is required.</li> <li>Must be qualified at the 10 series or greater level; MOS 25B/F or other military branch equivalent or industry occupational specialties as a CISCO network administrator; Army MOS 25L/N or other military branch equivalent or industry occupational specialties as a network installation (BICSI or Network+ or CompTIA certification) will be considered.</li> <li>CCIE certification with fiber optic certification is preferred.</li> </ul> <h4>3) Mechanical maintenance</h4> <ul> <li>Mechanical maintenance with qualifications at the 10 series or greater from U.S. Army MOS 94D/X and 91/B/S/W or other military branch equivalent, or industry occupational specialties such as National Institute for Automotive Service Excellence (ASE) certified truck mechanic or Federal Aviation Administration (FAA) general mechanic 1 or greater.</li> <li>Two years of hands-on experience on an aerostat system or a related industry/military equivalent is required.</li> <li>Operations and maintenance of mechanical equipment to include one or more of the following: <ul> <li>Hydraulic systems</li> <li>Winch systems</li> <li>Tether/cable handling systems</li> <li>Industrial generator sets</li> <li>Power switch gear</li> <li>HVAC</li> <li>Cranes, aerial lift, forklift</li> </ul> </li> </ul> <h4>Physical requirements:</h4> <ul> <li>Requires the ability to regularly lift up to 50 lbs.</li> <li>Requires the ability to regularly climb extension ladders, roof ladder, stepladders, and stairs at least 10 times during shift.</li> <li>Requires the flexibility to bend, stoop, and squat repetitively during shift.</li> <li>Requires the ability to regularly kneel repetitively during shift.</li> <li>Requires the ability to move in a 90-degree fashion on a repetitive basis during shift.</li> <li>Requires the ability to stretch and reach on a repetitive basis during shift.</li> <li>Requires the ability to walk extensively throughout the plant during shift.</li> <li>Requires the ability to interact with all clients in a professional and friendly manner despite periods of stress.</li> </ul> <h4>Medical requirements:</h4> <ul> <li>Successfully complete and pass the medical and dental examinations as required for deployment.</li> <li>Must maintain physical and dental requirements for the duration of the deployment.</li> </ul> <h4>Working and living conditions:</h4> <p>This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environment. Temperatures can reach 120-130 degrees Fahrenheit (50-55 degrees Celsius) during the summer months.</p> <p>Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to CENTCOM, EUCOM, and AFRICOM for extended periods. Work schedules are a minimum of six days per week and 10 hours per day, while some jobs have higher daily and weekly minimums.</p> <p>Position requires a six-week 34M training temporary duty assignment (TDY) to Elizabeth City, South Carolina.</p></p><p></p>

<p><h4>Job summary</h4> <p>Amentum is seeking a crew chief (aircraft mechanic III) to provide aircraft maintenance support, management, and leadership of a T-6A opportunity in Martyr BG Ali Flaih Air Base, Iraq (Balad Air Base). The selected candidate shall possess versatile skills and abilities to perform a wide range of responsibilities. The selected candidate will exercise sound judgment in making decisions by an understanding of operational requirements, the available resources and options, and analyzing the impacts – both short term and long term. This person shall have working experience in all aspects of flightline, phase maintenance, and aircrew life support systems.</p> <h4>Knowledge & skills</h4> <ul> <li>Experience providing on-the-job training (OJT) to technicians.</li> <li>Interface with operational customer to develop flying schedules and plan major maintenance events, complete daily and monthly operational reports, document inventory usage, control workflow.</li> <li>Work with other A&P mechanics and technical representatives to troubleshoot, diagnose, and solve unusual and complex maintenance problems.</li> <li>Ability to apply logic and good judgment, understand technical order diagrams and procedures, use test equipment for analysis of airframe, engine, flight control, pneumatic hydraulic, fuel, electrical/electronic systems problems.</li> <li>Plan and schedule aircraft utilization and maintenance activity and coordinate performance with operational customers.</li> <li>Assist in maintaining accurate parts inventory.</li> <li>Supervise aircraft jacking, lifting, and towing operations.</li> <li>Supervise aircraft and component inspections.</li> <li>Interpret inspection findings and determine adequacy of corrective actions.</li> <li>Troubleshoot aircraft structures, systems, components, and related equipment.</li> <li>Review maintenance forms, aircraft records, automated maintenance data systems, and historical reports to ensure complete documentation.</li> <li>Ability to inspect and operate powered and nonpowered aerospace ground equipment.</li> <li>Perform quality verification inspections (QVI) as needed.</li> <li>Perform other qualified duties as assigned.</li> </ul> <h4>Experience & education</h4> <ul> <li>Must have current Federal Aviation Administration (FAA) Airframe and Powerplant License (A&P).</li> <li>Minimum of ten (10) years working knowledge of aircraft maintenance operations on one or more of the T-6 Texan or similar fixed-wing aircraft is required.</li> <li>Must have aircraft maintenance and egress experience.</li> <li>Must have a broad working knowledge of aircraft maintenance, inspection techniques, FAA regulations, and Air Force technical publications.</li> <li>Demonstrated leadership ability combined with attention to detail.</li> <li>Must have knowledge of the scope and limitation of various categories of maintenance and their application.</li> <li>Must know theories and principles of engine operations; accessories and components; theory of flight; rigging of flight controls; electrical and electronic; pneumatic hydraulic; and mechanical principles.</li> <li>Knowledge of sheet metal, properties of materials, fuels, and oils. Ability to read, interpret and use manufacturers and aircraft maintenance manuals, service bulletins, blueprints, wiring/schematic diagrams, data tables, and other specifications to determine feasibility and method to repair or replace malfunctioning or damaged components.</li> <li>Must have a working knowledge of aircraft safety requirements.</li> <li>Ability to work in a fast-paced environment that requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules.</li> </ul> <h4>Compensation details</h4> <p>The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws.</p> <h4>Benefits overview</h4> <p>Our health and welfare benefits are designed to support you and your priorities. Offerings include:</p> <ul> <li>Health, dental, and vision insurance</li> <li>Paid time off and holidays</li> <li>Retirement benefits (including 401(k) matching)</li> <li>Educational reimbursement</li> <li>Parental leave</li> <li>Employee stock purchase plan</li> <li>Tax-saving options</li> <li>Disability and life insurance</li> <li>Pet insurance</li> </ul> <p>Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a collective bargaining agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions or benefits.</p> <h4>Equal opportunity employer statement</h4> <p>Amentum is proud to be an equal opportunity employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law.</p></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Amentum is seeking a Crew Chief (Aircraft Mechanic III) to provide aircraft Maintenance Support, Management, and Leadership of a T-6A opportunity in Martyr BG Ali Flaih Air Base, Iraq (Balad Air Base). The selected candidate shall possess versatile skills and abilities to perform a wide range of responsibilities. The selected candidate will exercise sound judgement in making decisions by an understanding of operational requirements, the available resources and options, and analyzing the impacts both short term and long term. This person shall have working experience all aspects of flightline, phase maintenance, and Aircrew Life Support Systems. Knowledge &amp; Skills Experience providing OJT to technicians. Interface with operational customer to develop flying schedules and plan major maintenance events, complete daily and monthly operational reports, documents inventory usage, controls workflow. Work with other A&amp;P Mechanics and technical representatives to trouble shoot, diagnose and solve unusual and complex maintenance problems. Ability to apply logic and good judgment, understand technical order diagrams and procedures, use test equipment for analysis of airframe, engine, flight control, pneudraulic, fuel, electrical/electronic systems, problems. Plan and schedule aircraft utilization and maintenance activity and coordinates performance with operational customers. Assist in maintaining accurate parts inventory. Supervises aircraft jacking, lifting, and towing operations. Supervises aircraft and component inspections. Interprets inspection findings and determines adequacy of corrective actions. Troubleshoot aircraft structures, systems, components, and related equipment. Reviews maintenance forms, aircraft records, automated maintenance data systems, and historical reports to ensure complete documentation. Ability to Inspect and operate powered and nonpowered aerospace ground equipment. Performs Quality Verification Inspections (QVI) as needed Perform other qualified duties as assigned Experience &amp; Education Must have current Federal Aviation Administration (FAA) Airframe and Powerplant License (A&amp;P). Minimum of Ten (10) years working knowledge of aircraft maintenance operations on one or more of the T-6 Texan or similar Fixed-Wing aircraft is required. Must have Aircraft Maintenance and Egress experience. Must have a broad working knowledge of aircraft maintenance, inspection techniques, FAA regulations, and Air Force technical publications. Demonstrated leadership ability combined with attention to detail. Must have knowledge of the scope and limitation of various categories of maintenance and their application. Must know theories and principles of engine operations; accessories and components; theory of flight; rigging of flight controls; electrical and electronic; pneudraulic; and mechanical principles. Knowledge of sheet metal, properties of materials, fuels, and oils. Ability to read, interpret and use manufacturers and aircraft maintenance manuals, service bulletins, blueprints, wiring/schematic diagrams, data tables and other specifications to determine feasibility and method to repair or replace malfunctioning or damaged components. Must have a working knowledge of aircraft safety requirements. Ability to work in a fast-paced environment that requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Must have current Federal Aviation Administration (FAA) Airframe and Powerplant License (A&amp;P).</p><p>Minimum of Ten (10) years working knowledge of aircraft maintenance operations on one or more of the T-6 Texan or similar Fixed-Wing aircraft is required.</p><p>Must have Aircraft Maintenance and Egress experience.</p><p>Must have a broad working knowledge of aircraft maintenance, inspection techniques, FAA regulations, and Air Force technical publications.</p><p>Demonstrated leadership ability combined with attention to detail.</p><p>Must have knowledge of the scope and limitation of various categories of maintenance and their application.</p><p>Must know theories and principles of engine operations; accessories and components; theory of flight; rigging of flight controls; electrical and electronic; pneudraulic; and mechanical principles.</p><p>Knowledge of sheet metal, properties of materials, fuels, and oils.</p><p>Ability to read, interpret and use manufacturers and aircraft maintenance manuals, service bulletins, blueprints, wiring/schematic diagrams, data tables and other specifications to determine feasibility and method to repair or replace malfunctioning or damaged components.</p><p>Must have a working knowledge of aircraft safety requirements.</p><p>Ability to work in a fast-paced environment that requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules.</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Senior CWI Engineer<br><br>Position Details<ul><li>Position Title: CWI Senior Engineer</li><li>Department: Wells</li><li>Location: Majnoon Oil Field – Basra, Iraq</li><li>Reports to: CWI Engineering Team Lead</li><li>Direct Reports: None</li></ul>1. Role Purpose<p>Provide engineering expertise in the planning, design, and execution support of completions, workover, well intervention and well integrity operations. Ensure high-quality engineering input, technical assurance, well integrity compliance, and continuous performance improvement across CWI operations.</p><br><br>2. Key ResponsibilitiesHSSE &amp; Well Integrity<ul><li>Champion a proactive safety culture with Zero Harm.</li><li>Conduct site safety visits, audits, and toolbox talk reviews.</li><li>Ensure compliance with well integrity standards such as NORSOK D‑010</li><li>Ensure engineering designs comply with HSSE policies, Life-Saving Rules, and well integrity guidelines.</li><li>Participate in risk assessments, HAZID, HAZOP, and technical assurance reviews.</li><li>Support incident investigations by providing technical analysis and recommendations.</li></ul>Program Development &amp; Technical Assurance<ul><li>Prepare and review Completion Programs, Workover Programs, and Intervention Procedures.</li><li>Develop well schematics, tool string designs, barrier philosophies, and risk assessments.</li><li>Ensure engineering designs comply with well integrity standards and operational requirements.</li><li>Perform technical evaluations for new technologies, equipment, and intervention methods.</li></ul>Operational Support &amp; Problem Solving<ul><li>Provide real-time engineering support to wellsite supervisors during operations.</li><li>Analyze operational challenges and propose technical solutions.</li><li>Perform pre-job and post-job reviews to ensure procedural compliance.</li><li>Support SIMOPS planning and coordination with Production, Subsurface, and Drilling teams.</li></ul>Cost &amp; Schedule Control<ul><li>Support development of budgets, forecasts, and AFE inputs.</li><li>Monitor job efficiency, performance, and operational KPIs.</li><li>Identify cost‑saving opportunities without compromising safety or quality.</li></ul>Contractor &amp; Performance Management<ul><li>Lead technical interface with service companies and contractors.</li><li>Evaluate technical proposals, equipment specifications, and new technologies.</li><li>Support tendering, technical evaluations, scopes of work, and contract management.</li><li>Monitor service quality and ensure alignment with engineering requirements.</li></ul>Reporting &amp; Governance<ul><li>Review technical proposals from service companies and ensure alignment with operational requirements.</li><li>Participate in contractor performance reviews and technical evaluations.</li><li>Ensure QA/QC compliance for equipment and tools used in rigless operations.</li></ul>3. Qualifications &amp; Experience<ul><li>Bachelor’s degree in Petroleum, Mechanical, or related Engineering discipline.</li><li>8-12+ years of experience in completions, well intervention, workover, and well integrity engineering disciplines.</li><li>Valid IWCF Level 4 Well Intervention Pressure Control certification.</li><li>Strong experience leading CWI engineering teams in high‑activity onshore fields.</li><li>Comprehensive understanding of well integrity standards (e.g., NORSOK D‑010), well control, and barrier management.</li><li>Strong knowledge of international standards (API, ISO, IOGP) and regulatory compliance requirements.</li><li>Expertise in completion, CT, slickline, e-line, ESP, stimulation, and workover engineering.</li><li>Experience in Iraq/Majnoon preferred.</li><li>Fluency in English; Arabic is an advantage.</li></ul>4. Core Competencies<ul><li>CWI Technical Mastery</li><li>Well Integrity &amp; Risk Management</li><li>Engineering &amp; HSSE Leadership</li><li>Performance Management &amp; Continuous Improvement</li><li>Cross‑Functional Collaboration</li><li>Contractor &amp; Stakeholder Management</li><li>Communication &amp; Technical Reporting</li></ul><br><p>Approved By: Steven Hendry</p><br><br><br><p>Position: Wells Manager</p><br><br><br><p>Date: 03 Mar 2026</p><br><br><br><br><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><b><br></b></p><p><b>Job Objectives:</b></p><p>HSE activities:</p><ul><li>Support and enforce project guidelines, HSE objectives and global improvement (e.g. referential, Golden Rules, reporting, REX, audits, Maestro, trainings, HSE action plans ).</li><li>Responsible for the respect of the HSE Rules and Company Specifications for his activity (also in term of QA &amp; QC)</li><li>Attend HSE meetings and training when necessary.</li><li>Initiate and/or Participate in Job Safety Analysis, make suggestions, stop dangerous situations, and report anomalies and dangerous acts.</li><li>Conduct toolbox talks and enforce safe work practices</li></ul><p>Asset Integrity:</p><ul><li>Contributes to the Ratawi Asset Integrity initiative by reporting any anomaly, defect, bad practice, lack of equipment, lack of competence that could result in a major HSE incident or loss of production.</li></ul><p>Daily Activities and missions:</p><ul><li>Supervise and coordinate construction activities for Electrical and Instrumentation directly with the Contractor.</li><li>Follow up and ensure the selected Contractor s to carry out works in their premises in prefabrication and under construction on the Sites</li><li>Ensure adherence to project specifications, drawings, and quality standards.</li><li>Lead E&amp;I work preparation and execution with Contractor to ensure adequate progress in line with planning and project milestones</li><li>Prepare, Review and validate construction methods and work instructions closely with the construction contractor</li><li>Ensure the proper execution of the works in compliance with safety and environmental protection procedures, technical specifications, budgets, and schedules,</li><li>Check the procedures and task sheets of the Companies, participate, or control the risk analyses, help in the preparation / check the work permits,</li><li>Resolve technical issues on-site in coordination with engineering teams.</li><li>Manage subcontractors and ensure proper allocation of manpower and equipment.</li><li>Optimize and follow up the work schedules, to do this check the good organization of the logistics and the Contractor's site</li><li>Control material deliveries and verify conformity with project requirements</li><li>Anticipate all potential problems, propose, if necessary, alternative "practical" solutions,</li><li>Organise Pre-commissioning activities, formalize handover dossier to Field Operations, ensure that mark-up documentation is reflecting the site condition and forward those to Engineering.</li><li>Monitor progress and report daily to the Construction Manager</li><li>Maintain good relationships with contractors, displaying flexibility when needed while also enforcing necessary standards.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Expected: Looking for an experienced E&amp;I Lead in onshore Greenfield and brownfield project with a very good knowledge of General Specifications, rules, procedures and International Codes and Standards.</p><p>Bachelor s degree in engineering or construction field.</p><p>10 to 15 years of experience in the oil industry, with significant experience in Construction.</p><p>Previous experience under SIMOPS works will be considered as a plus.</p><p>Team player with ability to work collaboratively across complex project teams and interface between interdisciplinary departments and within an international team.</p><p>Fluent in English, Arabic is a plus</p><p>The position will be based in Basra (Iraq) on rotational basis (4 On/4 Off)</p><p></p></section>