Equipment operator Jobs - Baghdad Iraq

<p><h4>Essential responsibilities:</h4> <p>Aerostat operators/user-level maintainers will participate in the overall, hands-on operation of the aerostat system including launch, in-flight, recovery, and moored activities.</p> <p>Candidates will perform all functions to operate the PGSS/PTDS, an aerostat mounted intelligence, surveillance, and reconnaissance (ISR) platform, its mobile mooring platform (MMP), sensor payload(s), communications and navigation systems as well as associated support equipment (boom lift, forklift, all terrain vehicles (ATVs), and electrical power generators).</p> <p>Candidate will perform user-level maintenance functions including performing hands-on preventative maintenance checks and services (PMCS), troubleshooting, removing and replacing line replaceable units (LRUs), and removing and replacing payloads.</p> <p>Candidate must possess a diverse range of skills with the ability to quickly adapt to new situations. Tasks will be performed under direction of higher classified technicians and/or site personnel.</p> <h4>Minimum requirements:</h4> <ul> <li>High school diploma or equivalent is required.</li> <li>Two-year associate’s degree in a technical field from an accredited college can substitute for work experience.</li> <li>Must have an active secret US government clearance or the ability to obtain a secret clearance. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must have a valid U.S. passport with a minimum of one year remaining.</li> <li>Must have valid US driver’s license.</li> <li>Knowledge of and experience in the operations of hardware systems and components.</li> <li>Experience in fault detection, isolation, and correction of hardware systems and individual components.</li> <li>Ability to perform routine system maintenance and analysis functions including: hardware configurations; adding, removing and replacing hardware components; use of hardware and software diagnostic testing tools; reading of electronic circuit schematics; and repairing printed circuit boards.</li> <li>At least one (1) year previous aerostat experience OR two (2) years of experience in the following areas may be substituted in lieu of aerostat experience:</li> </ul> <p><strong>1) Electrical maintenance mechanic</strong></p> <ul> <li>Possess at least two (2) years aerostat experience as an operator at the 20 series level or greater from Army MOS 35F (Intelligence Analyst), 35G (Geospatial Intelligence Imagery Analyst), 35H (Common Ground System Analyst), 96R (Ground Surveillance Systems Operator), 96U (Unmanned Aerial Vehicle Operator), or military branch equivalent.</li> <li>Two years of hands-on experience in performing operations and maintenance tasks either on an aerostat system or a related industry/military equivalent is required.</li> <li>Must be qualified at the 10 series or greater level (via military or civilian technical schools) is required.</li> <li>Ability to read electronic schematics.</li> <li>O&M of electro-mechanical equipment to include one or more of the following: <ul> <li>Hydraulic/servo valves</li> <li>Hydraulic actuators, control systems</li> <li>Test and diagnostic equipment</li> </ul> </li> </ul> <p><strong>2) Networking, IT & information systems</strong></p> <ul> <li>Two years’ experience is required.</li> <li>Must be qualified at the 10 series or greater level; MOS 25B/F or other military branch equivalent or industry occupational specialties as a CISCO Network Administrator; Army MOS 25L/N or other military branch equivalent or industry occupational specialties as a Network Installation (BICSI or Network + or Comp T Certification) will be considered.</li> <li>CCIE certification with fiber optic certification is preferred.</li> </ul> <p><strong>3) Mechanical maintenance</strong></p> <ul> <li>Mechanical maintenance with qualifications at the 10 series or greater from U.S. Army MOS 94D/X and 91/B/S/W or other military branch equivalent, or industry occupational specialties such as National Institute for Automotive Service Excellence (ASE) Certified Truck Mechanic or Federal Aviation Administration (FAA) General Mechanic 1 or greater.</li> <li>Two years of hands-on experience on an aerostat system or a related industry/military equivalent is required.</li> <li>O&M of mechanical equipment to include one or more of the following: hydraulic systems, winch systems, tether/cable handling systems, industrial generator sets, power switch gear, HVAC, cranes aerial lift, forklift, industrial generator sets.</li> </ul> <h4>Physical requirements:</h4> <ul> <li>Requires the ability to regularly lift up to 50 lbs.</li> <li>Requires the ability to regularly climb extension ladders, roof ladder, stepladders, and stairs at least 10 times during shift.</li> <li>Requires the flexibility to bend/stoop, squat repetitive during shift.</li> <li>Requires the ability to regularly kneel repetitive for shift.</li> <li>Requires the ability to move in a 90-degree fashion on a repetitive basis for shift.</li> <li>Requires the ability to stretch/reach on a repetitive basis for shift.</li> <li>Requires the ability to walk extensively throughout the plant during shift.</li> <li>Requires the ability to interact with all clients in a professional and friendly manner despite periods of stress.</li> </ul> <h4>Medical requirements:</h4> <p>Successfully complete and pass the medical and dental examinations as required by the employer and customer for deployment to Iraq.</p> <p>Must maintain physical and dental requirements for the duration of the deployment.</p> <h4>Working and living conditions:</h4> <p>This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environment. Temperatures can reach 120-130 degrees Fahrenheit/50-55 degrees Celsius during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to CENTCOM, EUCOM, and AFRICOM for extended periods. Work schedules are a minimum of 6 days per week and 10 hours per day, while some jobs have higher daily and weekly minimums.</p></p><p></p>

<p><h4>Essential responsibilities:</h4> <p>Aerostat operators/user-level maintainers will participate in the overall, hands-on operation of the aerostat system including launch, in-flight, recovery, and moored activities.</p> <p>Candidates will perform all functions to operate the PGSS/PTDS, an aerostat mounted intelligence, surveillance, and reconnaissance (ISR) platform, its mobile mooring platform (MMP), sensor payload(s), communications and navigation systems as well as associated support equipment (boom lift, forklift, all terrain vehicles (ATVs), and electrical power generators).</p> <p>Candidate will perform user-level maintenance functions including performing hands-on preventative maintenance checks and services (PMCS), troubleshooting, removing and replacing line replaceable units (LRUs), and removing and replacing payloads.</p> <p>Candidate must possess a diverse range of skills with the ability to quickly adapt to new situations. Tasks will be performed under direction of higher classified technicians and/or site personnel.</p> <h4>Minimum requirements:</h4> <ul> <li>High school diploma or equivalent is required.</li> <li>Two-year associate’s degree in a technical field from an accredited college can substitute for work experience.</li> <li>Must have an active secret US government clearance or the ability to obtain a secret clearance. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must have a valid U.S. passport with a minimum of one year remaining.</li> <li>Must have valid US driver’s license.</li> <li>Knowledge of and experience in the operations of hardware systems and components.</li> <li>Experience in fault detection, isolation, and correction of hardware systems and individual components.</li> <li>Ability to perform routine system maintenance and analysis functions including: hardware configurations; adding, removing and replacing hardware components; use of hardware and software diagnostic testing tools; reading of electronic circuit schematics; and repairing printed circuit boards.</li> <li>At least one (1) year previous aerostat experience OR two (2) years of experience in the following areas may be substituted in lieu of aerostat experience:</li> </ul> <p><strong>1) Electrical maintenance mechanic</strong></p> <ul> <li>Possess at least two (2) years aerostat experience as an operator at the 20 series level or greater from Army MOS 35F (Intelligence Analyst), 35G (Geospatial Intelligence Imagery Analyst), 35H (Common Ground System Analyst), 96R (Ground Surveillance Systems Operator), 96U (Unmanned Aerial Vehicle Operator), or military branch equivalent.</li> <li>Two years of hands-on experience in performing operations and maintenance tasks either on an aerostat system or a related industry/military equivalent is required.</li> <li>Must be qualified at the 10 series or greater level (via military or civilian technical schools) is required.</li> <li>Ability to read electronic schematics.</li> <li>O&M of electro-mechanical equipment to include one or more of the following: <ul> <li>Hydraulic/servo valves</li> <li>Hydraulic actuators, control systems</li> <li>Test and diagnostic equipment</li> </ul> </li> </ul> <p><strong>2) Networking, IT & information systems</strong></p> <ul> <li>Two years’ experience is required.</li> <li>Must be qualified at the 10 series or greater level; MOS 25B/F or other military branch equivalent or industry occupational specialties as a CISCO Network Administrator; Army MOS 25L/N or other military branch equivalent or industry occupational specialties as a Network Installation (BICSI or Network + or Comp T Certification) will be considered.</li> <li>CCIE certification with fiber optic certification is preferred.</li> </ul> <p><strong>3) Mechanical maintenance</strong></p> <ul> <li>Mechanical maintenance with qualifications at the 10 series or greater from U.S. Army MOS 94D/X and 91/B/S/W or other military branch equivalent, or industry occupational specialties such as National Institute for Automotive Service Excellence (ASE) Certified Truck Mechanic or Federal Aviation Administration (FAA) General Mechanic 1 or greater.</li> <li>Two years of hands-on experience on an aerostat system or a related industry/military equivalent is required.</li> <li>O&M of mechanical equipment to include one or more of the following: hydraulic systems, winch systems, tether/cable handling systems, industrial generator sets, power switch gear, HVAC, cranes aerial lift, forklift, industrial generator sets.</li> </ul> <h4>Physical requirements:</h4> <ul> <li>Requires the ability to regularly lift up to 50 lbs.</li> <li>Requires the ability to regularly climb extension ladders, roof ladder, stepladders, and stairs at least 10 times during shift.</li> <li>Requires the flexibility to bend/stoop, squat repetitive during shift.</li> <li>Requires the ability to regularly kneel repetitive for shift.</li> <li>Requires the ability to move in a 90-degree fashion on a repetitive basis for shift.</li> <li>Requires the ability to stretch/reach on a repetitive basis for shift.</li> <li>Requires the ability to walk extensively throughout the plant during shift.</li> <li>Requires the ability to interact with all clients in a professional and friendly manner despite periods of stress.</li> </ul> <h4>Medical requirements:</h4> <p>Successfully complete and pass the medical and dental examinations as required by the employer and customer for deployment to Iraq.</p> <p>Must maintain physical and dental requirements for the duration of the deployment.</p> <h4>Working and living conditions:</h4> <p>This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environment. Temperatures can reach 120-130 degrees Fahrenheit/50-55 degrees Celsius during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to CENTCOM, EUCOM, and AFRICOM for extended periods. Work schedules are a minimum of 6 days per week and 10 hours per day, while some jobs have higher daily and weekly minimums.</p></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Aerostat Operators provide Operations and Sustainment (O&amp;S) support for the Persistent Surveillance Systems Tethered (PSS-T) program in OCONUS site locations. PSS-T is comprised of former Persistent Ground Surveillance System (PGSS) and Persistent Threat Detection System (PTDS) programs. Position is contingent based upon availability and possible class dates. Updates to your application may be delayed. Essential Responsibilities: • Aerostat Operators/User-level maintainers will participate in the overall, hands-on operation of the aerostat system including launch, in-flight, recovery, and moored activities. • Candidates will perform all functions to operate the PGSS/PTDS, an aerostat mounted Intelligence, Surveillance, And Reconnaissance (ISR) platform, its Mobile Mooring Platform (MMP), Sensor Payload(s), communications and navigation systems as well as associated support equipment (Boom Lift, Forklift, All Terrain Vehicles (ATV's), and Electrical Power Generators). • Candidate will perform User-level maintenance functions include performing hands-on Preventative Maintenance Checks and Services (PMCS), troubleshooting, removing and replacing Line Replaceable Units (LRUs), and removing and replacing payloads. • Candidate must possess a diverse range of skills with the ability to quickly adapt to new situations. Tasks will be performed under direction of higher classified technicians and/or site personnel.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Minimum Requirements:</p><ul><li>High school diploma or equivalent is required.</li><li>Two-year Associate s degree in a technical field from an accredited college can substitute for work experience.</li><li>Must have an active Secret US Government Clearance or the ability to obtain a Secret clearance. Note: US Citizenship is required to obtain a Secret Clearance.</li><li>Must have a valid U.S. passport with a minimum of one year remaining.</li><li>Must have valid US Driver's license.</li><li>Knowledge of and experience in the operations of hardware systems and components.</li><li>Experience in fault detection, isolation, and correction of hardware systems and individual components.</li><li>Ability to perform routine system maintenance and analysis functions including: hardware configurations; adding, removing and replacing hardware components; use of hardware and software diagnostic testing tools; reading of electronic circuit schematics; and repairing printed circuit boards.</li><li>At least one (1) year previous Aerostat experience OR two (2) years of experience in the following areas may be substituted in lieu of aerostat experience:</li><ul><li>1) Electrical Maintenance Mechanic</li><ul><li>Possess at least two (2) year s aerostat experience as an operator at the 20 series level or greater from Army MOS 35F (Intelligence Analyst), 35G (Geospatial Intelligence Imagery Analyst), 35H (Common Ground System Analyst), 96R (Ground Surveillance Systems Operator), 96U (Unmanned Aerial Vehicle Operator), or military branch equivalent.</li><li>Two years of hands-on experience in performing operations and maintenance tasks either on an AEROSTAT system or a related industry/military equivalent is required.</li><li>Must be qualified at the 10 series or greater level (via military or civilian technical schools) is required.</li><li>Ability to read electronic schematics.</li><li>O&amp;M of electro-mechanical equipment to include one or more of the following:</li><ul><li>Hydraulic/servo valves</li><li>Hydraulic actuators, control systems</li><li>Test and diagnostic equipment</li></ul></ul><li>2) Networking, IT &amp; information systems</li><ul><li>Two years experience is required.</li><li>Must be qualified at the 10 series or greater level; MOS 25B/F or other military branch equivalent or industry occupational specialties as a CISCO Network Administrator; Army MOS 25L/N or other military branch equivalent or industry occupational specialties as a Network Installation (BICSI or Network + or Comp T Certification) will be considered.</li><li>CCIE certification with fiber optic certification is preferred.</li></ul><li>3) Mechanical Maintenance</li><ul><li>Mechanical Maintenance with qualifications at the 10 series or greater from U.S. Army MOS 94D/X and 91/B/S/W or other military branch equivalent, or industry occupational specialties such National Institute for Automotive Service Excellence (ASE) Certified Truck Mechanic or Federal Aviation Administration (FAA) General Mechanic 1 or greater.</li><li>Two years of hands-on experience on an AEROSTAT system or a related industry/military equivalent is required.</li><li>O&amp;M of mechanical equipment to include one or more of the following: Hydraulic systems, Winch systems, Tether/cable handling systems, Industrial generator sets, Power switch gear, HVAC, Cranes Aerial lift , Forklift , Industrial generator sets</li></ul></ul><p>Physical Requirements:</p><ul><li>Requires the ability to regularly lift up to 50 lbs.</li><li>Requires the ability to regularly climb extension ladders, roof ladder, stepladders, and stairs at least 10 times during shift.</li><li>Requires the flexibility to bend/stoop, squat repetitive during shift.</li><li>Requires the ability to regularly kneel repetitive for shift.</li><li>Requires the ability to move in a 90-degree fashion on a repetitive basis for shift.</li><li>Requires the ability to stretch/reach on a repetitive basis for shift.</li><li>Requires the ability to walk extensively throughout the plant during shift.</li><li>Requires the ability to interact with all clients in a professional and friendly manner despite periods of stress.</li></ul><p>Medical Requirements</p><ul><li>Successfully complete and pass the medical and dental examinations as required by Amentum and our customer for deployment to Iraq.</li><li>Must maintain physical and dental requirements for the duration of the deployment.</li></ul><p>Working and Living Conditions: This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environment. Temperatures can reach 130 degrees Fahrenheit/50-55 degrees Celsius during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to CENTCOM, EUCOM, and AFRICOM for extended periods. Work schedules are a minimum of 6 days per week and 10 hours per day, while some jobs have higher daily and weekly minimums.</p></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><b>Job Description </b><div> <p> <strong>Role Summary</strong> </p> <p>We are seeking a highly motivated and detail-oriented Engineer Assistant to join the talabat<br> mart (tMart) Operations team. In this role, you will serve as the core technical focal point<br> handling dark store expansion details, layouts, procurement documentation, and day-to-day<br> facility maintenance tracking. You will play a pivotal role in designing store layout developments, drafting construction-related technical documents, and supervising third-party contractors across civil, electrical, and piping disciplines to ensure our rapid grocery fulfillment infrastructure operates seamlessly.</p> <p> <strong>What s On Your Plate?</strong> </p> <p> <strong>Expansion &amp; Layout Development:</strong> </p> <ul> <li> <p>Technical Expansion Focal Point: Serve as the primary point of contact for all technical expansion details, collaborating with stakeholders to translate dark store requirements into actionable site project scopes.</p> </li> <li> <p>Layout Development &amp; Enhancement: Develop initial store layouts and propose layout enhancements to maximize space utilization.</p> </li> </ul> <p> </p> <p> <strong>Procurement &amp; Technical Documentation:</strong> </p> <ul> <li> <p>Construction BOQ &amp; SOW: Formulate comprehensive Bills of Quantities (BOQs) and Scopes of Work (SOWs) for new store construction, physical expansions, and facility remodeling.</p> </li> <li> <p>Needs-Based Engineering Packages: Directly evaluate operational store needs and build tailored technical procurement packages for hardware, layout fixtures, and physical infrastructure upgrades.</p> </li> </ul> <p> </p> <p> <strong>Facilities Maintenance &amp; Contractor Supervision:</strong> </p> <ul> <li> <p>Multidisciplinary Maintenance Tracking: Proactively identify, prioritize, and log maintenance needs across electrical networks, civil/structural store components, and water/refrigeration piping systems.</p> </li> <li> <p>Schedules &amp; Lifecycle Management: Establish, coordinate, and monitor preventive maintenance schedules to minimize store downtime and prevent asset degradation.</p> </li> <li> <p>On-Site Contractor Management: Serve as the main point of contact dealing with civil, electrical, HVAC and piping contractors, suppliers, and external service providers during installations or repair works.</p> </li> <li> <p>Supervision &amp; Asset Handover: Actively supervise contractor execution on-site, enforcing quality control, adherence to SOW guidelines, and directing final receiving or asset handover back to store operations.</p></li></ul></div></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph">Qualifications </p><div> <ul> <li> <p> <strong>Education &amp; Experience: </strong>Diploma or Bachelor s degree in Civil, Electrical, Mechanical, or Industrial Engineering, Architecture, or a highly related technical field. Minimum of 1 2 years of practical experience in site coordination, drafting, facilities maintenance, or an engineering assistant capacity.</p> </li> <li> <p> <strong>Technical Layout &amp; Project Skills: </strong>Proficiency in drafting tools (e.g., AutoCAD or similar layout planning software) with an understanding of commercial or warehousing space optimization. strong foundational knowledge in drafting construction BOQs and SOWs.</p> </li> <li> <p> <strong>Contractor &amp; Site Management: </strong>Demonstrated experience dealing with or supervising external contractors, vendors, and suppliers across construction trades (civil, electrical, or piping).</p> </li> <li> <p> <strong>Core Competencies:</strong> Exceptional organizational skills to handle shifting maintenance needs, schedule planning, and technical execution updates across multiple dark store properties simultaneously.</p></li></ul></div><p></p></section>

<p><h4>Duties</h4> <p>Responsible for maintaining a safe workplace and ensuring that safety is the highest priority in the workplace.</p> <p>Comply with all Environmental Health & Safety and Quality Assurance requirements and goals.</p> <p>Provide information and materials to these divisions as necessary to ensure adequate and legal documentation.</p> <p>Ensure data accuracy and update of equipment inventory database.</p> <p>Ensure that related data processing activities meet the requirements.</p> <p>Process excess turn-in documentation for all controlled and non-controlled excess equipment and materials.</p> <p>Review, reconcile, adjust and process all inventory transactions.</p> <p>Process Survey Reports for all missing equipment.</p> <p>Process and coordinate Equipment Transfers.</p> <p>Perform positive verbal and written communication skills with all internal and external customers.</p> <p>Assist in a broad scope of direct and indirect support activities involving customer owned equipment as necessary to complete assigned tasks.</p> <p>Perform additional duties and projects as assigned.</p> <h4>Required</h4> <p><strong>Minimum acceptable experience level:</strong> Minimum of 3 years’ experience supporting a DOD or DOS program exposure, at least two (2) years’ of international experience.</p> <p><strong>Knowledge, skills, and abilities:</strong></p> <ul> <li>Prior proven experience in property disposal operations with Defense Reutilization Management Operations (DRMO), Hazmat experience.</li> <li>Experience operating heavy equipment to include up to a 30K forklift, extended reach forklift, material handler, grappler (excavator), front end loader and material shredders.</li> <li>Experience with cutting torches to include plasma cutters.</li> <li>Commitment to maintaining a high performance team which delivers customer service excellence.</li> <li>Knowledge of principles and processes involved in supporting contract responsibilities at an overseas facility.</li> <li>Ability to work in a fast-paced environment that requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules.</li> <li>Cross-cultural sensitivity with an international perspective.</li> <li>Excellent organizational and time management skills.</li> <li>Computer skills, specifically in Microsoft Word and Excel.</li> <li>Ability to become an active and functioning member of a team.</li> <li>Ability to be innovative and be an agent for change.</li> <li>Expert communication skills to facilitate and disseminate information.</li> </ul> <p><strong>Education:</strong> A high school diploma or GED (General Education Diploma), bachelor’s degree in related field or fifteen (15) years of related experience.</p> <h4>Passport, licenses and certifications</h4> <p>As part of pre-contingency requirements, by the time the visa process starts, candidates must possess a valid passport with a minimum of 18 months remaining to expiration date with 8 blank pages.</p> <p>Valid drivers’ license.</p> <h4>Security vetting</h4> <p>Already possess a US Government issued security clearance or be able to obtain a favorable US Government clearance prior to being hired is required for the position. Must maintain eligibility at the required certification or clearance level for the duration of the contract.</p> <h4>Language skills</h4> <p>Satisfactory English proficiency to meet job requirements and to adhere and comply with safety, health, and security measures.</p> <h4>Medical</h4> <p>Successfully complete and pass the medical and drug examinations as required by the employer and customer for deployment to Iraq. Must maintain physical and drug requirements for duration of deployment.</p> <h4>Desired</h4> <ul> <li>Previous out of home country experience and previous work experience in harsh environmental conditions are a plus.</li> <li>Department of State experience.</li> <li>Five to seven years of international experience in challenging locations, preferably working in the Middle East, with a working knowledge of customs and cultural differences.</li> <li>Experience working with Amentum-PAE.</li> </ul> <h4>Other knowledge, skills and abilities</h4> <ul> <li>Knowledge of the principles and processes involved in Quality Control Management.</li> <li>Successful management of multiple sites in geographically dispersed locations.</li> <li>Ability to collect, analyze and summarize data and to prepare clear and concise reports.</li> <li>Experience in effectively dealing with international and headquarters staff, and sensitivity to other cultures.</li> <li>Exercise sound judgment and make decisions independently.</li> <li>Excellent organizational and time management skills, with the ability to handle multiple tasks and administrative details in a fast paced and constantly changing environment.</li> <li>Expert communication skills to facilitate and disseminate information.</li> </ul></p><p></p>

<p><h4>Duties</h4> <p>Responsible for maintaining a safe workplace and ensuring that safety is the highest priority in the workplace.</p> <p>Comply with all Environmental Health & Safety and Quality Assurance requirements and goals.</p> <p>Provide information and materials to these divisions as necessary to ensure adequate and legal documentation.</p> <p>Ensure data accuracy and update of equipment inventory database.</p> <p>Ensure that related data processing activities meet the requirements.</p> <p>Process excess turn-in documentation for all controlled and non-controlled excess equipment and materials.</p> <p>Review, reconcile, adjust and process all inventory transactions.</p> <p>Process Survey Reports for all missing equipment.</p> <p>Process and coordinate Equipment Transfers.</p> <p>Perform positive verbal and written communication skills with all internal and external customers.</p> <p>Assist in a broad scope of direct and indirect support activities involving customer owned equipment as necessary to complete assigned tasks.</p> <p>Perform additional duties and projects as assigned.</p> <h4>Required</h4> <p><strong>Minimum acceptable experience level:</strong> Minimum of 3 years’ experience supporting a DOD or DOS program exposure, at least two (2) years’ of international experience.</p> <p><strong>Knowledge, skills, and abilities:</strong></p> <ul> <li>Prior proven experience in property disposal operations with Defense Reutilization Management Operations (DRMO), Hazmat experience.</li> <li>Experience operating heavy equipment to include up to a 30K forklift, extended reach forklift, material handler, grappler (excavator), front end loader and material shredders.</li> <li>Experience with cutting torches to include plasma cutters.</li> <li>Commitment to maintaining a high performance team which delivers customer service excellence.</li> <li>Knowledge of principles and processes involved in supporting contract responsibilities at an overseas facility.</li> <li>Ability to work in a fast-paced environment that requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules.</li> <li>Cross-cultural sensitivity with an international perspective.</li> <li>Excellent organizational and time management skills.</li> <li>Computer skills, specifically in Microsoft Word and Excel.</li> <li>Ability to become an active and functioning member of a team.</li> <li>Ability to be innovative and be an agent for change.</li> <li>Expert communication skills to facilitate and disseminate information.</li> </ul> <p><strong>Education:</strong> A high school diploma or GED (General Education Diploma), bachelor’s degree in related field or fifteen (15) years of related experience.</p> <h4>Passport, licenses and certifications</h4> <p>As part of pre-contingency requirements, by the time the visa process starts, candidates must possess a valid passport with a minimum of 18 months remaining to expiration date with 8 blank pages.</p> <p>Valid drivers’ license.</p> <h4>Security vetting</h4> <p>Already possess a US Government issued security clearance or be able to obtain a favorable US Government clearance prior to being hired is required for the position. Must maintain eligibility at the required certification or clearance level for the duration of the contract.</p> <h4>Language skills</h4> <p>Satisfactory English proficiency to meet job requirements and to adhere and comply with safety, health, and security measures.</p> <h4>Medical</h4> <p>Successfully complete and pass the medical and drug examinations as required by the employer and customer for deployment to Iraq. Must maintain physical and drug requirements for duration of deployment.</p> <h4>Desired</h4> <ul> <li>Previous out of home country experience and previous work experience in harsh environmental conditions are a plus.</li> <li>Department of State experience.</li> <li>Five to seven years of international experience in challenging locations, preferably working in the Middle East, with a working knowledge of customs and cultural differences.</li> <li>Experience working with Amentum-PAE.</li> </ul> <h4>Other knowledge, skills and abilities</h4> <ul> <li>Knowledge of the principles and processes involved in Quality Control Management.</li> <li>Successful management of multiple sites in geographically dispersed locations.</li> <li>Ability to collect, analyze and summarize data and to prepare clear and concise reports.</li> <li>Experience in effectively dealing with international and headquarters staff, and sensitivity to other cultures.</li> <li>Exercise sound judgment and make decisions independently.</li> <li>Excellent organizational and time management skills, with the ability to handle multiple tasks and administrative details in a fast paced and constantly changing environment.</li> <li>Expert communication skills to facilitate and disseminate information.</li> </ul></p><p></p>

<p><h4>Duties</h4> <p><strong>Responsible for maintaining a safe workplace and ensuring that safety is the highest priority in the workplace.</strong></p> <p><strong>Comply with all Environmental Health & Safety and Quality Assurance requirements and goals. Provide information and materials to these divisions as necessary to ensure adequate and legal documentation.</strong></p> <p><strong>Provide oversight of all material handling and heavy equipment support operations.</strong></p> <p><strong>Primary responsibilities will be the safety and professional operations of a daily multi-national workforce and ensuring that all work requests are completed.</strong></p> <p><strong>Schedule daily work assignments of personnel.</strong></p> <p><strong>Review work orders and support requests to determine safety requirements, permitting, and equipment needs.</strong></p> <p><strong>Manage all work order activity to ensure that all work is properly documented and submitted for recording.</strong></p> <p><strong>Provide reports and data - both required and ad hoc.</strong></p> <p><strong>Ensure adequate supplies and materials are ordered for department.</strong></p> <p><strong>Ensure personnel are properly trained in equipment operation.</strong></p> <p><strong>Monitor and evaluate performance of personnel.</strong></p> <p><strong>Perform additional duties and projects as assigned.</strong></p> <h4>Required</h4> <p><strong>Minimum acceptable experience level:</strong> Two (2) years’ experience with horizontal earthwork and material handling equipment including forklifts, cranes, loaders, bulldozers, skid steers, and semi-tractor trucks.</p> <p><strong>Knowledge, skills, and abilities:</strong></p> <ul> <li>Good time management skills and able to multi-task using various types of cranes and rigging gear.</li> <li>Knowledge of proper loading techniques and forklift weight capacities.</li> <li>Ability to lift up to 30 pounds, bend, stoop, and climb in and around construction type equipment and work in adverse climatic conditions.</li> <li>Ability to coordinate and complete basic Transportation Movement Request (TMR).</li> <li>Prior experience in working with a multi-national workforce.</li> <li>Ability to extract information to produce reports.</li> <li>Ability to communicate with a wide variety of colleagues and customers.</li> <li>Knowledge of principles and processes involved in supporting contract responsibilities at an overseas facility.</li> <li>Ability to work in a fast-paced environment that requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules.</li> <li>Cross-cultural sensitivity with an international perspective.</li> <li>Excellent organizational and time management skills.</li> <li>Computer skills, specifically in Microsoft Word and Excel.</li> <li>Ability to become an active and functioning member of a team.</li> <li>Ability to be innovative and be an agent for change.</li> <li>Expert communication skills to facilitate and disseminate information.</li> </ul> <p><strong>Education:</strong> A high school diploma or GED.</p> <p><strong>Passport, licenses and certifications:</strong> As part of pre-contingency requirements, by the time the visa process starts, candidates must possess a valid passport with a minimum of 18 months remaining to expiration date with 8 blank pages. Valid drivers’ license from home of record.</p> <p><strong>Security vetting:</strong> Already possess a US Government issued security clearance or Moderate Risk Public Trust (MRPT) or be able to obtain a favorable MRPT certification or US Government clearance prior to being hired is required for the position. Must maintain eligibility at the required certification or clearance level for the duration of the contract.</p> <p><strong>Language skills:</strong> Satisfactory English proficiency to meet job requirements and to adhere and comply with safety, health, and security measures.</p> <p><strong>Medical:</strong> Successfully complete and pass the medical and dental examinations as required by Amentum and our customer for deployment to Iraq. Must maintain physical and dental requirements for duration of deployment.</p> <h4>Desired</h4> <ul> <li>Relevant overseas contract experience.</li> <li>Previous work experience in harsh environmental conditions are a plus.</li> <li>Experience working with Amentum.</li> </ul> <h4>Other Responsibilities</h4> <p><strong>Safety</strong> - Amentum enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid/buddy aid responsibilities, participating in emergency response tasks, and serving on safety committees and teams.</p> <p><strong>Quality</strong> - Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the Amentum Quality Policy and carry out job activities in compliance with applicable Amentum Quality System documents and customer contracts. Each employee must read and understand his or her Quality Management and Customer Satisfaction responsibilities.</p> <p><strong>Procedure compliance</strong> - Each employee must read, understand, and implement the general and specific operational, safety, quality and environmental requirements of all plans, procedures and policies pertaining to job.</p> <h4>Working and Living Conditions</h4> <p>This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environment. Temperatures can reach 120-130 degrees Fahrenheit (50-55 degrees Celsius) during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to Iraq for extended periods.</p> <p>Work schedules are a minimum of 6 days per week and 10 hours per day, while some jobs have higher daily and weekly minimums. Employees must be willing and able to perform physical activities including, but not limited to, heavy lifting and moving of items, parts, assemblies, and equipment up to the safety regulation maximum; climbing in and out of equipment; crawling; and working outdoors. This includes being able to lift and carry 40 pounds of personal protective equipment for extended periods of time and being capable of running and ‘duck & cover’ during emergencies without putting oneself or others at risk.</p></p><p></p>

<p><h4>Duties</h4> <p><strong>Responsible for maintaining a safe workplace and ensuring that safety is the highest priority in the workplace.</strong></p> <p><strong>Comply with all Environmental Health & Safety and Quality Assurance requirements and goals. Provide information and materials to these divisions as necessary to ensure adequate and legal documentation.</strong></p> <p><strong>Provide oversight of all material handling and heavy equipment support operations.</strong></p> <p><strong>Primary responsibilities will be the safety and professional operations of a daily multi-national workforce and ensuring that all work requests are completed.</strong></p> <p><strong>Schedule daily work assignments of personnel.</strong></p> <p><strong>Review work orders and support requests to determine safety requirements, permitting, and equipment needs.</strong></p> <p><strong>Manage all work order activity to ensure that all work is properly documented and submitted for recording.</strong></p> <p><strong>Provide reports and data - both required and ad hoc.</strong></p> <p><strong>Ensure adequate supplies and materials are ordered for department.</strong></p> <p><strong>Ensure personnel are properly trained in equipment operation.</strong></p> <p><strong>Monitor and evaluate performance of personnel.</strong></p> <p><strong>Perform additional duties and projects as assigned.</strong></p> <h4>Required</h4> <p><strong>Minimum acceptable experience level:</strong> Two (2) years’ experience with horizontal earthwork and material handling equipment including forklifts, cranes, loaders, bulldozers, skid steers, and semi-tractor trucks.</p> <p><strong>Knowledge, skills, and abilities:</strong></p> <ul> <li>Good time management skills and able to multi-task using various types of cranes and rigging gear.</li> <li>Knowledge of proper loading techniques and forklift weight capacities.</li> <li>Ability to lift up to 30 pounds, bend, stoop, and climb in and around construction type equipment and work in adverse climatic conditions.</li> <li>Ability to coordinate and complete basic Transportation Movement Request (TMR).</li> <li>Prior experience in working with a multi-national workforce.</li> <li>Ability to extract information to produce reports.</li> <li>Ability to communicate with a wide variety of colleagues and customers.</li> <li>Knowledge of principles and processes involved in supporting contract responsibilities at an overseas facility.</li> <li>Ability to work in a fast-paced environment that requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules.</li> <li>Cross-cultural sensitivity with an international perspective.</li> <li>Excellent organizational and time management skills.</li> <li>Computer skills, specifically in Microsoft Word and Excel.</li> <li>Ability to become an active and functioning member of a team.</li> <li>Ability to be innovative and be an agent for change.</li> <li>Expert communication skills to facilitate and disseminate information.</li> </ul> <p><strong>Education:</strong> A high school diploma or GED.</p> <p><strong>Passport, licenses and certifications:</strong> As part of pre-contingency requirements, by the time the visa process starts, candidates must possess a valid passport with a minimum of 18 months remaining to expiration date with 8 blank pages. Valid drivers’ license from home of record.</p> <p><strong>Security vetting:</strong> Already possess a US Government issued security clearance or Moderate Risk Public Trust (MRPT) or be able to obtain a favorable MRPT certification or US Government clearance prior to being hired is required for the position. Must maintain eligibility at the required certification or clearance level for the duration of the contract.</p> <p><strong>Language skills:</strong> Satisfactory English proficiency to meet job requirements and to adhere and comply with safety, health, and security measures.</p> <p><strong>Medical:</strong> Successfully complete and pass the medical and dental examinations as required by Amentum and our customer for deployment to Iraq. Must maintain physical and dental requirements for duration of deployment.</p> <h4>Desired</h4> <ul> <li>Relevant overseas contract experience.</li> <li>Previous work experience in harsh environmental conditions are a plus.</li> <li>Experience working with Amentum.</li> </ul> <h4>Other Responsibilities</h4> <p><strong>Safety</strong> - Amentum enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid/buddy aid responsibilities, participating in emergency response tasks, and serving on safety committees and teams.</p> <p><strong>Quality</strong> - Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the Amentum Quality Policy and carry out job activities in compliance with applicable Amentum Quality System documents and customer contracts. Each employee must read and understand his or her Quality Management and Customer Satisfaction responsibilities.</p> <p><strong>Procedure compliance</strong> - Each employee must read, understand, and implement the general and specific operational, safety, quality and environmental requirements of all plans, procedures and policies pertaining to job.</p> <h4>Working and Living Conditions</h4> <p>This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environment. Temperatures can reach 120-130 degrees Fahrenheit (50-55 degrees Celsius) during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to Iraq for extended periods.</p> <p>Work schedules are a minimum of 6 days per week and 10 hours per day, while some jobs have higher daily and weekly minimums. Employees must be willing and able to perform physical activities including, but not limited to, heavy lifting and moving of items, parts, assemblies, and equipment up to the safety regulation maximum; climbing in and out of equipment; crawling; and working outdoors. This includes being able to lift and carry 40 pounds of personal protective equipment for extended periods of time and being capable of running and ‘duck & cover’ during emergencies without putting oneself or others at risk.</p></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Disposal Yard Specialist will be based at Amentum Baghdad Embassy Compound [BEC] in Baghdad, Iraq, and serve the Base Life Support Services contract in support of the State Department. This position will report to the Disposal Yard Manager. The duties and responsibilities listed below are representative of the nature and level of work assigned and are not necessarily all inclusive.</p><p>DUTIES:</p><ul><li>Responsible for maintaining a safe workplace and ensuring that safety is the highest priority in the workplace.</li><li>Comply with all Environmental Health &amp; Safety and Quality Assurance requirements and goals.</li><li>Provide information and materials to these divisions as necessary to ensure adequate and legal documentation.</li><li>Ensures data accuracy and update of equipment inventory database.</li><li>Ensure that related data processing activities meet the requirements.</li><li>Process excess turn-in documentation for all controlled and non-controlled excess equipment and materials.</li><li>Review, reconcile, adjust and process all inventory transactions.</li><li>Process Survey Reports for all missing equipment.</li><li>Process and coordinate Equipment Transfers.</li><li>Perform positive verbal and written communication skills with all internal and external customers.</li><li>Assist in a broad scope of direct and indirect support activities involving customer owned equipment as necessary to complete assigned tasks.</li><li>Perform additional duties and projects as assigned.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Minimum of 3 years experience supporting a DOD or DOS program Exposure, at least two (2) years of international experience.</li><li>Prior proven experience in Property Disposal operations with Defense Reutilization Management Operations (DRMO), Hazmat experience.</li><li>Experience operating heavy equipment to include up to a 30K Forklift, Extended reach Forklift, Material Handler, Grappler (Excavator), Front End Loader and Material Shredders.</li><li>Experience with cutting torches to include Plasma cutters.</li><li>Commitment to maintaining a high performance team which delivers customer service excellence.</li><li>Knowledge of principles and processes involved in supporting contract responsibilities at an overseas facility.</li><li>Ability to work in a fast-paced environment that requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules.</li><li>Cross-cultural sensitivity with an international perspective.</li><li>Excellent organizational and time management skills.</li><li>Computer skills, specifically in Microsoft Word and Excel.</li><li>Ability to become an active and functioning member of a team.</li><li>Ability to be innovative and be an agent for change.</li><li>Expert communication skills to facilitate and disseminate information.</li><li>A high school diploma or GED (General Education Diploma), Bachelor s Degree in related field fifteen (15) yeas of related experience.</li><li>As part of pre-contingency requirements, by the time the visa process starts , candidates must possess a valid passport with a minimum of 18 months remaining to expiration date with 8 blank pages.</li><li>Valid drivers license</li><li>Already possess a US Government issued security clearance or be able to obtain a favorable US Government clearance prior to being hired is required for the position. Must maintain eligibility at the required certification or clearance level for the duration of the contract.</li><li>Satisfactory English proficiency to meet job requirements and to adhere and comply with safety, health, and security measures.</li><li>Successfully complete and pass the medical and drug examinations as required by Amentum and our customer for deployment to Iraq. Must maintain physical and drug requirements for duration of deployment.</li><li>Previous out of home country experience and previous work experience in harsh environmental conditions are a plus.</li><li>Department of State experience.</li><li>Five to seven years of international experience in challenging locations, preferably working in the Middle East, with a working knowledge of customs and cultural differences.</li><li>Experience working with Amentum-PAE.</li><li>Knowledge of the principles and processes involved in Quality Control Management.</li><li>Successful management of multiple sites in geographically dispersed locations.</li><li>Ability to collect, analyze and summarize data and to prepare clear and concise reports.</li><li>Experience in effectively dealing with international and headquarters staff, and sensitivity to other cultures.</li><li>Exercise sound judgment and make decisions independently.</li><li>Excellent organizational and time management skills, with the ability to handle multiple tasks and administrative details in a fast paced and constantly changing environment.</li><li>Expert communication skills to facilitate and disseminate information.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Horizontal Foreman will be based at Baghdad Embassy Compound (BEC) Amentum site in Iraq and serve the Operations and Maintenance Support Services (OMSS) contract in support of the U.S. Department of State. This position will be responsible for managing the daily work assignments of Material Handling and Heavy Equipment Operations and will report to the Operations and Maintenance Manager. The duties and responsibilities listed below are representative of the nature and level of work assigned and are not necessarily all inclusive. DUTIES: Responsible for maintaining a safe workplace and ensuring that safety is the highest priority in the workplace. Comply with all Environmental Health &amp; Safety and Quality Assurance requirements and goals. Provide information and materials to these divisions as necessary to ensure adequate and legal documentation. Provide oversight of all material handling and heavy equipment support operations. Primary responsibilities will be the safety and professional operations of a daily multi-national workforce and ensuring that all work requests are completed. Schedule daily work assignments of personnel. Review work orders and support requests to determine safety requirements, permitting, and equipment needs. Manage all work order activity to ensure that all work is properly documented and submitted for recording. Provide reports and data - both required and ad hoc. Ensure adequate supplies and materials are ordered for department. Ensure personnel are properly trained in equipment operation. Monitor and evaluate performance of personnel. Perform additional duties and projects as assigned.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>REQUIRED: Minimum Acceptable Experience Level: Two (2) years experience with Horizontal Earthwork and Material Handling Equipment including forklifts, cranes, loaders, bulldozers, skid steers, and semi-tractor trucks. Knowledge, Skills, and Abilities: Good time management skills and able to multi-task using various types of cranes and rigging gear. Knowledge of proper loading techniques and forklift weight capacities. Ability to lift up to 30 pounds, bend, stoop, and climb in and around construction type equipment and work in adverse climatic conditions. Ability to coordinate and complete basic Transportation Movement Request (TMR). Prior experience in working with a multi-national workforce Ability to extract information to produce reports. Ability to communicate with a wide variety of colleagues and customers. Knowledge of principles and processes involved in supporting contract responsibilities at an overseas facility. Ability to work in a fast-paced environment that requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules. Cross-cultural sensitivity with an international perspective. Excellent organizational and time management skills. Computer skills, specifically in Microsoft Word and Excel. Ability to become an active and functioning member of a team. Ability to be innovative and be an agent for change. Expert communication skills to facilitate and disseminate information. Education: A high school diploma or GED. Passport, Licenses and Certifications: As part of pre-contingency requirements, by the time the visa process starts , candidates must possess a valid passport with a minimum of 18 months remaining to expiration date with 8 blank pages. Valid drivers license from Home of Record. Security Vetting: Already possess a US Government issued security clearance or Moderate Risk Public Trust (MRPT) or be able to obtain a favorable MRPT certification or US Government clearance prior to being hired is required for the position. Must maintain eligibility at the required certification or clearance level for the duration of the contract. Language Skills: Satisfactory English proficiency to meet job requirements and to adhere and comply with safety, health, and security measures. Medical: Successfully complete and pass the medical and dental examinations as required by Amentum and our customer for deployment to Iraq. Must maintain physical and dental requirements for duration of deployment. DESIRED: Relevant overseas contract experience. Previous work experience in harsh environmental conditions are a plus. Experience working with Amentum. OTHER RESPONSIBILITIES Safety - Amentum enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid/buddy aid responsibilities, participating in emergency response tasks, and serving on safety committees and teams. Quality - Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the Amentum Quality Policy and carry out job activities in compliance with applicable Amentum Quality System documents and customer contracts. Each employee must read and understand his/her Quality Management and Customer Satisfaction responsibilities. Procedure Compliance - Each employee must read, understand, and implement the general and specific operational, safety, quality and environmental requirements of all plans, procedures and policies pertaining to job. WORKING AND LIVING CONDITIONS: This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environment. Temperatures can reach 120- 130 degrees Fahrenheit/50-55 degrees Celsius during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to Iraq for extended periods. Work schedules are a minimum of 6 days per week and 10 hours per day, while some jobs have higher daily and weekly minimums. Employees must be willing and able to perform physical activities including, but not limited to, heavy lifting and moving of items, parts, assemblies, and equipment up to the safety regulation maximum; climbing in and out of equipment; crawling; and working outdoors. This includes being able to lift and carry 40 pounds of personal protective equipment for extended periods of time and being capable of running and duck &amp; cover during emergencies without putting oneself or others at risk.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Achieve the assigned region's targets, including lead generation. </p></li><li><p>Support the Regional Manager in reaching business goals. </p></li><li><p>Develop new clients and nurture relationships with existing ones. </p></li><li><p>Stay informed about competitors and market trends, forecasting market needs to drive company growth. </p></li><li><p>Build and maintain strong client relationships, proactively addressing their needs and expectations.</p></li><li><p>Collaborate with teams and technical experts to develop marketing and communication tools for new products, programs, and solutions.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor's degree in Marketing, Business, or a related field</p></li><li><p>Experience in construction/heavy machinery sales</p></li><li><p>Relevant experience in the construction and automobile sectors</p></li><li><p>Iraq sales experience is a must</p></li><li><p>Minimum of 2 years in Sales and Marketing</p></li><li><p>Strong communication and customer service skills</p></li></ul><br><br><p> المهام والمسؤوليات: تحقيق أهداف المنطقة المحددة، بما في ذلك توليد العملاء المحتملين (Leads). دعم المدير الإقليمي في تحقيق الأهداف التجارية. استقطاب عملاء جدد وبناء علاقات قوية مع العملاء الحاليين. متابعة المنافسين واتجاهات السوق، وتوقع احتياجات السوق لدعم نمو الشركة. بناء علاقات قوية ومستدامة مع العملاء والاستجابة الاستباقية لاحتياجاتهم وتوقعاتهم. التعاون مع الفرق الفنية والخبراء لتطوير أدوات التسويق ومواد الاتصال الخاصة بالمنتجات والبرامج والحلول الجديدة. المتطلبات: درجة البكالوريوس في التسويق أو إدارة الأعمال أو مجال ذي صلة. خبرة في مبيعات معدات البناء / المعدات الثقيلة. خبرة ذات صلة في قطاعي البناء والسيارات. خبرة في المبيعات داخل العراق (شرط أساسي). خبرة لا تقل عن سنتين في مجال المبيعات والتسويق. مهارات قوية في التواصل وخدمة العملاء.</p><p></p></section>

<p><h4>Company description</h4> <p>We are far more than a worldwide leader. We welcome you as you are and you can find a job and brand that matches your personality. We support you to grow and learn every day, making sure that work brings purpose to your life, so that during your journey with us, you can continue to explore Accor’s limitless possibilities.</p> <p>By joining an Accor brand, every chapter of your story is yours to write and together we can imagine tomorrow's hospitality.</p> <p>Do what you love; care for the world; dare to challenge the status quo! #BELIMITLESS</p> <h4>What is in it for you?</h4> <ul> <li>Employee benefit card offering discounted rates in Accor worldwide</li> <li>Learning programs through our Academies and the opportunity to earn qualifications while you work</li> <li>Opportunity to develop your talent and grow within your property and across the world</li> <li>Ability to make a difference in the local community through our Corporate Social Responsibility activities</li> </ul> <h4>Job description</h4> <ul> <li>Answer and transfer incoming calls promptly and professionally</li> <li>Handle guest requests, inquiries, and messages received through the telephone system</li> <li>Connect guests with the appropriate hotel departments and colleagues</li> <li>Provide accurate information about hotel facilities, services, operating hours, and procedures</li> <li>Manage wake-up call requests accurately and on time</li> <li>Maintain confidentiality of guest information and telephone communications</li> <li>Record and communicate guest messages accurately and promptly</li> <li>Assist with emergency and priority calls in accordance with hotel procedures</li> <li>Monitor and operate the hotel PBX telephone system efficiently</li> <li>Coordinate with Front Office, Housekeeping, Engineering, Security, and other departments when required</li> <li>Follow proper telephone etiquette and hotel communication standards at all times</li> <li>Maintain accurate records and logs related to telephone operations</li> <li>Report any telephone system issues or technical problems to the relevant department</li> <li>Handle guest complaints and requests professionally, escalating matters when necessary</li> <li>Support the smooth operation of the Telephone Department and maintain a professional and welcoming tone in all interactions</li> <li>Perform any other duties reasonably assigned by the supervisor or management</li> </ul> <h4>Qualifications</h4> <ul> <li>High school diploma or equivalent; a diploma or degree in hospitality, tourism, or a related field is an advantage</li> <li>Previous experience as a PBX operator, telephone operator, guest service agent, or in a similar hotel position is preferred</li> <li>Experience in a hotel or hospitality environment is an advantage</li> <li>Good verbal communication and interpersonal skills</li> <li>Professional and pleasant telephone manner</li> <li>Good command of English; additional languages are an advantage</li> <li>Ability to remain calm and professional when handling difficult or high-pressure situations</li> <li>Strong attention to detail, particularly when recording messages and handling wake-up calls</li> <li>Basic computer skills and the ability to operate telephone/PBX systems</li> <li>Good organizational and multitasking skills</li> <li>Ability to work effectively as part of a team</li> <li>Willingness to work shifts, including weekends and public holidays</li> <li>Strong commitment to guest satisfaction and service excellence</li> </ul> <h4>Additional information</h4> <p>Our commitment to diversity & inclusion:</p> <p>We are an inclusive company and our ambition is to attract, recruit and promote diverse talent.</p></p><p></p>

<p><h4>Program logistics and property manager overview</h4> <p>The program logistics and property manager will be primarily based in Baghdad, Iraq. The logistics and property manager will manage all supply chain services, including acquisitions, receiving, stocking, inventorying, issuing, and shipment of goods, utilizing resources to accomplish operational requirements. The logistics and property manager will report to program management to manage multiple geographical sites and functions to support critical client mission activities of this contract. The logistics and property manager is specifically accountable for proactively identifying, analyzing, and correcting systemic performance concerns, and for providing structured performance briefings to the program manager and business group vice president to ensure sustained contract compliance and mission readiness.</p> <h4>Duties</h4> <ul> <li>Ensure proper material controls are in place, and operations are following established scope of work (SOW), standard operating procedures (SOP), and occupational health and safety administration (OSHA) standards.</li> <li>Establish and maintain department performance baselines and key performance indicators (KPIs) for all logistics and property functions; conduct monthly trend analysis to proactively identify and address performance degradation before it impacts the embassy mission at BEC.</li> <li>Ensure equipment and material shipments are actively tracked and provide timely updates to program management, operations, construction, and other stakeholders as required to ensure all delivery delays are monitored and adjusted for.</li> <li>Review status of projects and budgets; manage schedules and prepare status reports to brief program stakeholders of performance, compliance, and anticipated gaps.</li> <li>Proactively escalate emerging performance risks and negative trends to the project manager and business group vice president through structured weekly and monthly briefings, ensuring leadership visibility and enabling timely corrective intervention.</li> <li>Assess project issues and develop resolutions to meet productivity, quality, and client-satisfaction goals and objectives. Collect, analyze, and summarize data for report preparation and submit written reports.</li> <li>Prepare and deliver structured quarterly performance briefings to the project manager and business group vice president covering KPI status, trend analysis, corrective actions in progress, workforce performance metrics, and forecasted risks to logistics operations at BEC.</li> <li>Conduct formal root cause analysis (RCA) for recurring logistics failures or chronic performance shortfalls; develop, implement, and track written corrective action plans (CAPs) with defined milestones, responsible parties, and completion timelines; report CAP status to program management at defined intervals.</li> <li>Direct the work of a diverse employee population assigned to the program.</li> <li>Responsible for coordinating subordinate employee recruitment, selection and training, performance assessment, work assignments, salary, and recognition/disciplinary actions.</li> <li>Identify chronic under-performance within the department workforce; develop and execute performance improvement plans (PIPs) with documented benchmarks, supervisory oversight, and outcome tracking to restore performance standards and prevent recurrence.</li> <li>Ensure that common supplies, materials, equipment, and services are procured from local and regional supply markets to the maximum extent practicable.</li> <li>Maintain effective, timely, and respectful communication and interaction with other employees and managers and support other organizations.</li> <li>Additional tasks and special projects as assigned.</li> </ul> <h4>Required experience</h4> <ul> <li>Minimum acceptable experience level: ten (10) years’ progressive experience, including staff management, in a high volume, multi-unit receiving/inventory or supply management environment.</li> <li>Demonstrated ability to achieve high standards of customer service while representing the company to customers.</li> <li>Demonstrated experience establishing, implementing, and managing formal performance improvement programs that address department deficiencies, restore contract compliance, and sustain corrected performance over time.</li> <li>Experience with supply chain management (SCM) systems particularly in relation to accurate inventory management.</li> <li>Experience developing, implementing, monitoring, evaluating, and driving the adoption of logistics processes as prescribed in the operations plan.</li> <li>Experience working independently with various functions and disciplines of supply chain and operations.</li> <li>Experience with business intelligence and data analysis, and research using the MS Office suite of programs.</li> </ul> <h4>Knowledge, skills, and abilities</h4> <ul> <li>Knowledge of all principles and processes involved in operating and supporting supply chain functions at a large-scale overseas facility.</li> <li>Knowledge of the FAR and industry leading practices regarding government property. Ability to clearly and concisely articulate services/requirements in writing.</li> <li>Successful management of multiple sites in geographically dispersed locations operating in an environment of constant change.</li> <li>Experience in effectively dealing with international and headquarters staff, and sensitivity to other cultures.</li> <li>Excellent organizational and time management skills, with the ability to handle multiple tasks and administrative details in a fast-paced and constantly changing environment.</li> <li>Ability to develop, monitor, and present department performance metrics using data-driven methods; demonstrated experience conducting trend analysis and presenting findings with actionable recommendations to senior program leadership (PM and VP level).</li> <li>Knowledge of corrective action plan (CAP) development, implementation, and tracking methodologies applicable to government property and logistics programs operating under FAR-based contracts in high-security, overseas environments.</li> </ul> <h4>Education</h4> <ul> <li>A high school diploma or GED.</li> <li>An undergraduate degree is preferred but can be replaced with additional years of business administration, operations, supply chain management, government property administration, or a similar discipline preferred.</li> </ul> <h4>Licenses and certifications</h4> <ul> <li>Valid drivers’ license from home of record.</li> <li>NPMA certification or ability to obtain within one year – CPPA (Certified Professional Property Administrator).</li> </ul> <h4>Desired qualifications</h4> <ul> <li>Previous out of home country experience and previous work experience in harsh environmental conditions are a plus.</li> <li>Experience working with Amentum.</li> <li>Experience working with MAXIMO and/or AMRO systems.</li> </ul> <h4>Security and other requirements</h4> <ul> <li>Must be able to obtain and maintain a secret US government clearance. Note: US citizenship is required to obtain a secret clearance.</li> <li>Expert professional, oral and written English communication skills to present, facilitate, and disseminate information.</li> <li>Successfully complete and pass the medical and dental examinations as required for deployment to Iraq. Must maintain physical and dental requirements for duration of deployment.</li> </ul> <h4>Other responsibilities</h4> <ul> <li><strong>Safety:</strong> Enforce a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. Each employee is responsible for completing all training requirements and fulfilling all self-aid/buddy aid responsibilities, participating in emergency response tasks, and serving on safety committees and teams.</li> <li><strong>Quality:</strong> Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. Each employee must conform to the quality policy and carry out job activities in compliance with applicable quality system documents and customer contracts. Each employee must read and understand their quality management and customer satisfaction responsibilities.</li> <li><strong>Procedure compliance:</strong> Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to the job.</li> </ul> <h4>Working and living conditions</h4> <p>This position is in an austere environment with harsh and dangerous conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environment. Temperatures can reach 120-130 degrees Fahrenheit (50-55 degrees Celsius) during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to Iraq for extended periods.</p> <p>Work schedules are a minimum of six days per week and ten hours per day, while some jobs have higher daily and weekly minimums. Employees must be willing and able to perform physical activities including, but not limited to, heavy lifting and moving of items, parts, assemblies, and equipment up to the safety regulation maximum; climbing in and out of equipment; crawling; and working outdoors. This includes being able to lift and carry 40 pounds of personal protective equipment for extended periods of time and being capable of running and ‘duck & cover’ during emergencies without putting oneself or others at risk.</p></p><p></p>

<p><h4>Program logistics and property manager overview</h4> <p>The program logistics and property manager will be primarily based in Baghdad, Iraq. The logistics and property manager will manage all supply chain services, including acquisitions, receiving, stocking, inventorying, issuing, and shipment of goods, utilizing resources to accomplish operational requirements. The logistics and property manager will report to program management to manage multiple geographical sites and functions to support critical client mission activities of this contract. The logistics and property manager is specifically accountable for proactively identifying, analyzing, and correcting systemic performance concerns, and for providing structured performance briefings to the program manager and business group vice president to ensure sustained contract compliance and mission readiness.</p> <h4>Duties</h4> <ul> <li>Ensure proper material controls are in place, and operations are following established scope of work (SOW), standard operating procedures (SOP), and occupational health and safety administration (OSHA) standards.</li> <li>Establish and maintain department performance baselines and key performance indicators (KPIs) for all logistics and property functions; conduct monthly trend analysis to proactively identify and address performance degradation before it impacts the embassy mission at BEC.</li> <li>Ensure equipment and material shipments are actively tracked and provide timely updates to program management, operations, construction, and other stakeholders as required to ensure all delivery delays are monitored and adjusted for.</li> <li>Review status of projects and budgets; manage schedules and prepare status reports to brief program stakeholders of performance, compliance, and anticipated gaps.</li> <li>Proactively escalate emerging performance risks and negative trends to the project manager and business group vice president through structured weekly and monthly briefings, ensuring leadership visibility and enabling timely corrective intervention.</li> <li>Assess project issues and develop resolutions to meet productivity, quality, and client-satisfaction goals and objectives. Collect, analyze, and summarize data for report preparation and submit written reports.</li> <li>Prepare and deliver structured quarterly performance briefings to the project manager and business group vice president covering KPI status, trend analysis, corrective actions in progress, workforce performance metrics, and forecasted risks to logistics operations at BEC.</li> <li>Conduct formal root cause analysis (RCA) for recurring logistics failures or chronic performance shortfalls; develop, implement, and track written corrective action plans (CAPs) with defined milestones, responsible parties, and completion timelines; report CAP status to program management at defined intervals.</li> <li>Direct the work of a diverse employee population assigned to the program.</li> <li>Responsible for coordinating subordinate employee recruitment, selection and training, performance assessment, work assignments, salary, and recognition/disciplinary actions.</li> <li>Identify chronic under-performance within the department workforce; develop and execute performance improvement plans (PIPs) with documented benchmarks, supervisory oversight, and outcome tracking to restore performance standards and prevent recurrence.</li> <li>Ensure that common supplies, materials, equipment, and services are procured from local and regional supply markets to the maximum extent practicable.</li> <li>Maintain effective, timely, and respectful communication and interaction with other employees and managers and support other organizations.</li> <li>Additional tasks and special projects as assigned.</li> </ul> <h4>Required experience</h4> <ul> <li>Minimum acceptable experience level: ten (10) years’ progressive experience, including staff management, in a high volume, multi-unit receiving/inventory or supply management environment.</li> <li>Demonstrated ability to achieve high standards of customer service while representing the company to customers.</li> <li>Demonstrated experience establishing, implementing, and managing formal performance improvement programs that address department deficiencies, restore contract compliance, and sustain corrected performance over time.</li> <li>Experience with supply chain management (SCM) systems particularly in relation to accurate inventory management.</li> <li>Experience developing, implementing, monitoring, evaluating, and driving the adoption of logistics processes as prescribed in the operations plan.</li> <li>Experience working independently with various functions and disciplines of supply chain and operations.</li> <li>Experience with business intelligence and data analysis, and research using the MS Office suite of programs.</li> </ul> <h4>Knowledge, skills, and abilities</h4> <ul> <li>Knowledge of all principles and processes involved in operating and supporting supply chain functions at a large-scale overseas facility.</li> <li>Knowledge of the FAR and industry leading practices regarding government property. Ability to clearly and concisely articulate services/requirements in writing.</li> <li>Successful management of multiple sites in geographically dispersed locations operating in an environment of constant change.</li> <li>Experience in effectively dealing with international and headquarters staff, and sensitivity to other cultures.</li> <li>Excellent organizational and time management skills, with the ability to handle multiple tasks and administrative details in a fast-paced and constantly changing environment.</li> <li>Ability to develop, monitor, and present department performance metrics using data-driven methods; demonstrated experience conducting trend analysis and presenting findings with actionable recommendations to senior program leadership (PM and VP level).</li> <li>Knowledge of corrective action plan (CAP) development, implementation, and tracking methodologies applicable to government property and logistics programs operating under FAR-based contracts in high-security, overseas environments.</li> </ul> <h4>Education</h4> <ul> <li>A high school diploma or GED.</li> <li>An undergraduate degree is preferred but can be replaced with additional years of business administration, operations, supply chain management, government property administration, or a similar discipline preferred.</li> </ul> <h4>Licenses and certifications</h4> <ul> <li>Valid drivers’ license from home of record.</li> <li>NPMA certification or ability to obtain within one year – CPPA (Certified Professional Property Administrator).</li> </ul> <h4>Desired qualifications</h4> <ul> <li>Previous out of home country experience and previous work experience in harsh environmental conditions are a plus.</li> <li>Experience working with Amentum.</li> <li>Experience working with MAXIMO and/or AMRO systems.</li> </ul> <h4>Security and other requirements</h4> <ul> <li>Must be able to obtain and maintain a secret US government clearance. Note: US citizenship is required to obtain a secret clearance.</li> <li>Expert professional, oral and written English communication skills to present, facilitate, and disseminate information.</li> <li>Successfully complete and pass the medical and dental examinations as required for deployment to Iraq. Must maintain physical and dental requirements for duration of deployment.</li> </ul> <h4>Other responsibilities</h4> <ul> <li><strong>Safety:</strong> Enforce a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. Each employee is responsible for completing all training requirements and fulfilling all self-aid/buddy aid responsibilities, participating in emergency response tasks, and serving on safety committees and teams.</li> <li><strong>Quality:</strong> Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. Each employee must conform to the quality policy and carry out job activities in compliance with applicable quality system documents and customer contracts. Each employee must read and understand their quality management and customer satisfaction responsibilities.</li> <li><strong>Procedure compliance:</strong> Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to the job.</li> </ul> <h4>Working and living conditions</h4> <p>This position is in an austere environment with harsh and dangerous conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environment. Temperatures can reach 120-130 degrees Fahrenheit (50-55 degrees Celsius) during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to Iraq for extended periods.</p> <p>Work schedules are a minimum of six days per week and ten hours per day, while some jobs have higher daily and weekly minimums. Employees must be willing and able to perform physical activities including, but not limited to, heavy lifting and moving of items, parts, assemblies, and equipment up to the safety regulation maximum; climbing in and out of equipment; crawling; and working outdoors. This includes being able to lift and carry 40 pounds of personal protective equipment for extended periods of time and being capable of running and ‘duck & cover’ during emergencies without putting oneself or others at risk.</p></p><p></p>

<p><h4>Duties</h4> <p>Provide information and materials to these divisions as necessary to ensure adequate and legal documentation.<br> Ensure Property Department compliance with Property Management and Control Procedures.<br> Conduct random compliance audits on all sites and departments in Iraq.<br> Develop and execute corrective action plans for audit deficiencies and inventory accountable property.<br> Mentor lower-level Property Staff and custodians in proper process and procedures as they relate to Government Property.<br> Identify problem areas and recommend viable solutions.<br> Perform physical inventories of Government Furnished Property (GFP) and Contractor Acquired Property (CAP), as directed by the Property Management and Control Procedures and/or the Logistics and Property Manager.<br> Ensure Government Property Identification numbers (GP) are properly assigned, prepare required schedule, and assist with identifying lost, damaged, and destroyed property as well as excessive consumption.<br> Work closely with Property Custodians to ensure overall accountability of assets.<br> Track and record movement of all types of Government property. This includes movement from one point to another within a contractor’s facility, movement between facilities for any purpose, and protection during movement.<br> Conduct country-wide Property Training on a yearly basis as well as establish training plans for new hire employees and refresher training.<br> Ensure compliance with Federal Acquisition Regulation (FAR), Statement of Work (SOW), and Standard Operating Procedures (SOP).<br> Develop processes and desktop procedures to maintain continuity of job performance.<br> Audit logs and status records to ensure completion of lost, damaged, or destroyed items.<br> Check LTDD packages for accuracy and completion.<br> Perform additional duties and projects as qualified to perform as assigned.<br> Responsible for maintaining a safe workplace and ensuring that safety is the highest priority in the workplace.<br> Comply with all Environmental Health & Safety and Quality Assurance requirements and goals.</p> <h4>Required</h4> <p><strong>Minimum acceptable experience level:</strong> Five years’ experience with overseas Government contracts. Department of State contracts strongly preferred.</p> <p><strong>Knowledge, skills, and abilities:</strong><br> Knowledge of FAR and industry leading practices regarding government property.<br> Ability to clearly and concisely articulate services and requirements in writing.<br> Ability to articulate in a clear and concise manner with Management and Trades Departments daily.<br> Ability to demonstrate analytical and researching skills.<br> Ability to perform the technical requirements efficiently and effectively.<br> Ability to define problems, collect data, and propose solutions.<br> Ability to read, interpret, and follow all Logistic Management procedures, policies, and guidelines.<br> Ability to effectively present information and respond to questions.<br> Excellent organizational and time management skills, with ability to prioritize effectively and work with a sense of urgency.<br> Ability to lift materials and equipment weighing up to 50 lbs.<br> Ability to work in a fast-paced environment that requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules.<br> Understanding how inventory affects compensation.<br> Knowledge of principles and processes involved in supporting contract responsibilities at an overseas facility.<br> Cross-cultural sensitivity with an international perspective.<br> Computer skills, specifically in Microsoft Word and Excel.<br> Ability to become an active and functioning member of a team.<br> Ability to be innovative and be an agent for change.<br> Expert communication skills to facilitate and disseminate information.</p> <p><strong>Education:</strong><br> An undergraduate degree is preferred but can be replaced with additional years of Government Property Administration experience.</p> <p><strong>Licenses and certifications:</strong><br> Valid driver’s license from home of record.<br> NPMA Certification or ability to obtain within one year.</p> <p><strong>Security vetting:</strong><br> Possessing a Moderate Risk Public Trust (MRPT) or be able to obtain a favorable MRPT certification prior to being hired is required.</p> <p><strong>Language skills:</strong><br> Sufficient English proficiency to meet job requirements and to adhere and comply with safety, health, and security measures.</p> <p><strong>Medical:</strong><br> Successfully complete and pass the medical and dental examinations as required for deployment. Must maintain physical and dental requirements for duration of deployment.</p> <h4>Desired</h4> <ul> <li>Previous out of home country experience and previous work experience in harsh environmental conditions are a plus.</li> <li>Experience working with the company.</li> </ul> <h4>Other responsibilities</h4> <p><strong>Safety:</strong> Enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. Each employee is responsible for completing all training requirements and fulfilling all self-aid and buddy aid responsibilities, participating in emergency response tasks, and serving on safety committees and teams as appropriate.</p> <p><strong>Quality:</strong> Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the Quality Policy and carry out job activities in compliance with applicable Quality System documents and customer contracts. Each employee must read and understand his or her Quality Management and Customer Satisfaction responsibilities.</p> <p><strong>Procedure compliance:</strong> Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to the job.</p> <h4>Working and living conditions</h4> <p>This position may be in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environments. Temperatures can reach 120 to 130 degrees Fahrenheit (50 to 55 degrees Celsius) during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy for extended periods. Work schedules are a minimum of six days per week and 10 hours per day, while some jobs have higher daily and weekly minimums. Employees must be willing and able to perform physical activities including, but not limited to, heavy lifting and moving of items, parts, assemblies, and equipment up to the safety regulation maximum; climbing in and out of equipment; crawling; and working outdoors. This includes being able to lift and carry 40 pounds of personal protective equipment for extended periods of time and being capable of running and ‘duck and cover’ during emergencies without putting oneself or others at risk.</p></p><p></p>

<p><h4>Duties</h4> <p>Provide information and materials to these divisions as necessary to ensure adequate and legal documentation.<br> Ensure Property Department compliance with Property Management and Control Procedures.<br> Conduct random compliance audits on all sites and departments in Iraq.<br> Develop and execute corrective action plans for audit deficiencies and inventory accountable property.<br> Mentor lower-level Property Staff and custodians in proper process and procedures as they relate to Government Property.<br> Identify problem areas and recommend viable solutions.<br> Perform physical inventories of Government Furnished Property (GFP) and Contractor Acquired Property (CAP), as directed by the Property Management and Control Procedures and/or the Logistics and Property Manager.<br> Ensure Government Property Identification numbers (GP) are properly assigned, prepare required schedule, and assist with identifying lost, damaged, and destroyed property as well as excessive consumption.<br> Work closely with Property Custodians to ensure overall accountability of assets.<br> Track and record movement of all types of Government property. This includes movement from one point to another within a contractor’s facility, movement between facilities for any purpose, and protection during movement.<br> Conduct country-wide Property Training on a yearly basis as well as establish training plans for new hire employees and refresher training.<br> Ensure compliance with Federal Acquisition Regulation (FAR), Statement of Work (SOW), and Standard Operating Procedures (SOP).<br> Develop processes and desktop procedures to maintain continuity of job performance.<br> Audit logs and status records to ensure completion of lost, damaged, or destroyed items.<br> Check LTDD packages for accuracy and completion.<br> Perform additional duties and projects as qualified to perform as assigned.<br> Responsible for maintaining a safe workplace and ensuring that safety is the highest priority in the workplace.<br> Comply with all Environmental Health & Safety and Quality Assurance requirements and goals.</p> <h4>Required</h4> <p><strong>Minimum acceptable experience level:</strong> Five years’ experience with overseas Government contracts. Department of State contracts strongly preferred.</p> <p><strong>Knowledge, skills, and abilities:</strong><br> Knowledge of FAR and industry leading practices regarding government property.<br> Ability to clearly and concisely articulate services and requirements in writing.<br> Ability to articulate in a clear and concise manner with Management and Trades Departments daily.<br> Ability to demonstrate analytical and researching skills.<br> Ability to perform the technical requirements efficiently and effectively.<br> Ability to define problems, collect data, and propose solutions.<br> Ability to read, interpret, and follow all Logistic Management procedures, policies, and guidelines.<br> Ability to effectively present information and respond to questions.<br> Excellent organizational and time management skills, with ability to prioritize effectively and work with a sense of urgency.<br> Ability to lift materials and equipment weighing up to 50 lbs.<br> Ability to work in a fast-paced environment that requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules.<br> Understanding how inventory affects compensation.<br> Knowledge of principles and processes involved in supporting contract responsibilities at an overseas facility.<br> Cross-cultural sensitivity with an international perspective.<br> Computer skills, specifically in Microsoft Word and Excel.<br> Ability to become an active and functioning member of a team.<br> Ability to be innovative and be an agent for change.<br> Expert communication skills to facilitate and disseminate information.</p> <p><strong>Education:</strong><br> An undergraduate degree is preferred but can be replaced with additional years of Government Property Administration experience.</p> <p><strong>Licenses and certifications:</strong><br> Valid driver’s license from home of record.<br> NPMA Certification or ability to obtain within one year.</p> <p><strong>Security vetting:</strong><br> Possessing a Moderate Risk Public Trust (MRPT) or be able to obtain a favorable MRPT certification prior to being hired is required.</p> <p><strong>Language skills:</strong><br> Sufficient English proficiency to meet job requirements and to adhere and comply with safety, health, and security measures.</p> <p><strong>Medical:</strong><br> Successfully complete and pass the medical and dental examinations as required for deployment. Must maintain physical and dental requirements for duration of deployment.</p> <h4>Desired</h4> <ul> <li>Previous out of home country experience and previous work experience in harsh environmental conditions are a plus.</li> <li>Experience working with the company.</li> </ul> <h4>Other responsibilities</h4> <p><strong>Safety:</strong> Enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. Each employee is responsible for completing all training requirements and fulfilling all self-aid and buddy aid responsibilities, participating in emergency response tasks, and serving on safety committees and teams as appropriate.</p> <p><strong>Quality:</strong> Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the Quality Policy and carry out job activities in compliance with applicable Quality System documents and customer contracts. Each employee must read and understand his or her Quality Management and Customer Satisfaction responsibilities.</p> <p><strong>Procedure compliance:</strong> Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to the job.</p> <h4>Working and living conditions</h4> <p>This position may be in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environments. Temperatures can reach 120 to 130 degrees Fahrenheit (50 to 55 degrees Celsius) during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy for extended periods. Work schedules are a minimum of six days per week and 10 hours per day, while some jobs have higher daily and weekly minimums. Employees must be willing and able to perform physical activities including, but not limited to, heavy lifting and moving of items, parts, assemblies, and equipment up to the safety regulation maximum; climbing in and out of equipment; crawling; and working outdoors. This includes being able to lift and carry 40 pounds of personal protective equipment for extended periods of time and being capable of running and ‘duck and cover’ during emergencies without putting oneself or others at risk.</p></p><p></p>

<br>ZAIN2498 - BI Senior Data Scientist<br>•<br>Operation<br>Zain Iraq<br>•<br>Division<br>Operations<br>•<br>Location<br>Iraq - Baghdad<br>•<br>Closing Date<br>05-Sep-2026<br>About Zain<br>Zain is the pioneer of mobile telecommunications in the Middle East. We began life in 1983 in Kuwait as the region s first mobile operator, and since the initiation of our expansion strategy in 2003, we have expanded rapidly. Read more here: https://zain.com/en/about-us/overview<br>Role Purpose<br>Zain Iraq is actively recruiting to hire a BI Senior Data Scientist who is responsible of customer analytics unit activities including contribution to advanced analytics roadmap, liaising with departments in prioritization of business requirements, developing and implementing advanced analytics models, proactively defining areas for data science initiatives, supervising and managing data science projects, managing implementation and maintenance of used analytical models. ( segmentation, proactive churn model, big data use cases)<br>Responsibilities<br>•<br>Applies advanced statistical and predictive modeling and machine learning techniques to design, build, maintain, and improve on business decisions including commercial, finance , technical and for other core functions.<br>•<br>Works with business stakeholders to identify the business requirements and the expected outcome. Models and frames business scenarios that are meaningful and which impact on critical business processes and/or decisions.<br>•<br>Leads discovery processes with business stakeholders to identify the business requirements and the expected outcome.<br>•<br>Identifies what data is available and relevant, including internal and external data sources.<br>•<br>Makes strategic recommendations on data collection, integration, and retention requirements incorporating business requirements and knowledge of best practices.<br>•<br>Solves client analytics problems and communicates results and methodologies.<br>•<br>Employs the appropriate algorithm by using data mining solution packages to discover patterns and validates analysis by comparing appropriate samples.<br>•<br>Develops innovative and effective approaches to solve clients' analytics problems and communicates results and methodologies.<br>•<br>Presents and depicts the rationale of their findings in easy-to-understand terms for the business, contradicting common belief, if needed.<br>•<br>Communicates and works with business subject matter experts and organizational leadership.<br>•<br>Provides on-going tracking and monitoring of performance of decision systems and statistical models. Leads the design and deployment of enhancements and fixes to implemented models as needed.<br>•<br>Utilize AI technologies to support business objectives through data-driven insights and automation.<br>Education, Experience and Competencies<br>Education<br>•<br>Bachelor degree in IT, computer science or related fields<br>•<br>BSC or above in a relevant field such as Computer Science, Data Science, Mathematics, econometrics, or related disciplines.<br>•<br>Machine Learning: Solid understanding of supervised &amp; unsupervised, or reinforcement learning techniques.<br>•<br>Deep Learning: Proficient in neural network architectures and frameworks such as PyTorch.<br>•<br>LLMs &amp; NLP (Preferable experience): Hands-on experience with NLP technique and familiarity with transformer-based models.<br>•<br>Causal Inference (Preferable experience): Familiarity with causal modeling techniques<br>•<br>Programming: Proficiency in SQL or Python and familiarity with ML libraries.Bachelor s degree in an IT-related field or equivalent<br>Experience<br>•<br>4 6 years in data science or ML roles.<br>Competencies<br>Behavioral<br>•<br>Achievement Driven<br>•<br>Integrity<br>•<br>Teamwork<br>•<br>Information Seeking<br>Technical<br>•<br>Oral and Written Communication<br>•<br>Financial Management<br>•<br>Project / Program Management<br>•<br>Business modelling and Analysis<br>•<br>Strategic Planning and Thinking<br>•<br>Sales Management<br>•<br>Technology Application<br>•<br>Performance Management<br>•<br>IT Business Analysis<br>IDE Competency<br>•<br>Courage to Engage<br>•<br>Addressing Bias<br>•<br>Allyship<br>About Application Process<br>If you meet the criteria and you are enthusiastic about the role, we would welcome your application.<br>To<br>complete the application you would need the following document(s):<br>• Resume/CV<br>• Highest Education Qualification<br>Apply for This Vacancy<br>Back<br>

<h2>Mechanical Maintenance Manager</h2><p><strong>Location:</strong> Iraq<br><strong>Industry:</strong> Food Manufacturing – New Pasta Production Plant<br><strong>Department:</strong> Engineering & Maintenance<br><strong>Reports To:</strong> Plant Manager</p><h3>Job Purpose</h3><p>The Mechanical Maintenance Manager is responsible for leading all mechanical maintenance activities to ensure maximum equipment reliability, operational efficiency, and production continuity. The role oversees preventive, predictive, and corrective maintenance programs while supporting the successful commissioning and operation of a new pasta manufacturing facility.</p><h3>Key Responsibilities</h3><ul><li><p>Develop, implement, and continuously improve preventive, predictive, and corrective maintenance programs for all mechanical equipment.</p></li><li><p>Lead, supervise, and develop the mechanical maintenance team to achieve high performance and technical excellence.</p></li><li><p>Support the installation, commissioning, and start-up of new production lines and utility systems.</p></li><li><p>Ensure maximum equipment availability and minimize production downtime.</p></li><li><p>Investigate equipment failures using Root Cause Analysis (RCA) and implement permanent corrective actions.</p></li><li><p>Prepare annual maintenance plans, budgets, and spare parts strategies.</p></li><li><p>Implement and maintain a Computerized Maintenance Management System &#40;CMMS&#41;, where applicable.</p></li><li><p>Coordinate closely with Production, Quality, Utilities, and Warehouse departments to ensure smooth plant operations.</p></li><li><p>Manage critical spare parts inventory and optimize maintenance costs.</p></li><li><p>Supervise contractors, equipment suppliers, and external service providers.</p></li><li><p>Ensure compliance with health, safety, environmental, and food safety standards.</p></li><li><p>Monitor and report key maintenance performance indicators, including:</p><ul><li><p>Equipment Availability</p></li><li><p>Downtime</p></li><li><p>Mean Time to Repair (MTTR)</p></li><li><p>Mean Time Between Failures (MTBF)</p></li><li><p>Maintenance Cost Performance</p></li></ul></li><li><p>Drive continuous improvement initiatives to increase equipment efficiency and reliability.</p></li><li><p>Ensure all maintenance documentation, SOPs, and technical records are accurate and up to date.</p></li></ul><p></p><p><strong>Requirements</strong></p><h3>Qualifications</h3><ul><li><p>Bachelor's degree in Mechanical Engineering or a related discipline.</p></li><li><p>Minimum of 8–10 years of experience in mechanical maintenance within a manufacturing environment.</p></li><li><p>At least 3–5 years of experience in a maintenance leadership or managerial role.</p></li><li><p>Previous experience in food manufacturing is highly preferred, particularly in pasta, flour milling, bakery, or similar processing industries.</p></li></ul><h3>Preferred Experience</h3><ul><li><p>Hands-on experience with <strong>Anselmo</strong> pasta production lines is highly preferred.</p></li><li><p>Experience with Italian pasta processing equipment manufacturers such as Pavan, Fava, Braibanti, or equivalent is an advantage.</p></li><li><p>Strong knowledge of pasta processing equipment including mixers, presses, dryers, conveyors, packaging machines, and related auxiliary systems.</p></li><li><p>Experience in the commissioning and start-up of new manufacturing facilities is highly desirable.</p></li></ul><p></p>

<p><h4>Essential responsibilities:</h4> <p>The designee shall be qualified to maintain, modify, and repair electrical power generating and control systems, automatic transfer switches, heating, ventilation, air conditioning and refrigeration (HVAC) systems, and associated equipment. Performs scheduled periodic maintenance on systems and components, and adjusts systems to maintain proper voltage, refrigerant levels, current, frequency, and synchronization. Identifies, repairs, and records malfunctions by removing, repairing, and/or replacing defective components.</p> <p>The designee shall maintain systems such as, but not limited to, Cummins generator series DGDK, DSGAB, DGBB, C15D6, C35D6, 125D6D, MEPP series 1050, 1070A, PP-3106A and utilize Cummins InPower software for diagnostics. This designee shall be qualified to work from blueprints, drawings, and operate a variety of electrician’s hand tools and testing instruments.</p> <p>Support various generator/HVAC systems identified in Table 4.5.1 – C2 Systems and Associated Support Equipment; Table 4.5.2 ATCALS Systems and Associated Support Equipment; Table 4.5.3 ATC Weather Systems and Associated Support Equipment; Table 4.5.4 C2 Air Control Squadron O&M Support; Table 4.5.5 Regional Maintenance Center O&M and Support Equipment. Units range from 15 kW to 250 kW power generation and 1 - 5 ton HVAC split and rooftop configurations.</p> <h4>Minimum position knowledge, skills, and abilities required:</h4> <ul> <li>Universal 608 HVAC certification.</li> <li>High school diploma or GED. Formal training on power generating equipment and associated equipment such as military technical training school, vocational college, and/or a four (4) year apprentice program with experience in electrical power production maintenance and repair.</li> <li>Willingness to perform other duties outside the HVAC trade.</li> <li>Computer knowledge to navigate online training, time keeping, and email.</li> <li>Four (4) years of practical experience with equipment the technician will maintain. Six (6) months of Cummins Commercial, Advanced Medium Mobile Power Source (AMMPS) and InPower Software experience required.</li> <li>Ability to lift up to 50 lbs.</li> <li>Ability to do the following for sustained periods of time: stoop, bend, kneel, carry, reach, lift.</li> <li>Ability to work in a fast-paced, constantly changing environment.</li> <li>Ability to obtain and maintain a US CENTCOM Medical Exam.</li> <li>Must be able to obtain and maintain a Secret Security Clearance. Note: US citizenship is required to obtain a Secret Clearance.</li> </ul></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The designee shall be qualified to maintain, modify, and repair electrical power generating and control systems, automatic transfer switches, heating, ventilation, air conditioning and refrigeration (HVAC) systems, and associated equipment. Performs scheduled periodic maintenance on systems and components, and adjusts systems to maintain proper voltage, refrigerant levels, current, frequency, and synchronization. Identifies, repairs, and records malfunctions by removing, repairing, and or replacing defective components. The designee shall maintain systems such as, but not limited to Cummins generator series' DGDK, DSGAB, DGBB, C15D6, C35D6 125D6D, MEPP series 1050, 1070A, PP- 3106A and utilize Cummins Inpower software for diagnostics. This designee shall be qualified to work from blueprints, drawings, and operating a variety of electrician s hand tools and testing instruments. Support various generator/HVAC systems identified in Table 4.5.1 C2 Systems and Associated Support Equipment; Table 4.5.2 ATCALS Systems and Associated Support Equipment; Table 4.5.3 ATC Weather Systems and Associated Support equipment; Table 4.5.4 C2 Air Control Squadron O&amp;M Support, Table 4.5.5 Regional Maintenance Center O&amp;M and Support Equipment. Units range from 15kW to 250kW power generation and 1 - 5 ton HVAC split and roof top configurations.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Universal 608 HVAC certification.</li><li>High School diploma or GED.</li><li>Formal training on power generating equipment and associated equipment such as: military technical training school, vocational college, and/or a four (4) year apprentice program with experience in electrical power production maintenance and repair.</li><li>Willingness to perform other duties outside the HVAC trade.</li><li>Computer knowledge to navigate online training, time keeping and email.</li><li>Four (4) years of practical experience with equipment the technician will maintain.</li><li>Six (6) months of Cummins Commercial, Advanced Medium Mobile Power Source (AMMPS) and InPower Software experience required.</li><li>Ability to lift of up 50 lbs.</li><li>Ability to do the following for sustained periods of time: stoop, bend, kneel, carry, reach, lift.</li><li>Ability to work in a fast paced, constantly changing environment</li><li>Ability to obtain and maintain a US CENTCOM Medical Exam</li><li>Must be able to obtain/maintain a Secret Security Clearance.</li><li>NOTE: US Citizenship is required to obtain a Secret Clearance.</li></ul><p></p></section>