وظائف فني دوكو

<p><h4>Duties</h4> <p><strong>Responsible for maintaining a safe workplace and ensuring that safety is the highest priority in the workplace.</strong></p> <p><strong>Comply with all Environmental Health & Safety and Quality Assurance requirements and goals. Provide information and materials to these divisions as necessary to ensure adequate and legal documentation.</strong></p> <p><strong>Provide oversight of all material handling and heavy equipment support operations.</strong></p> <p><strong>Primary responsibilities will be the safety and professional operations of a daily multi-national workforce and ensuring that all work requests are completed.</strong></p> <p><strong>Schedule daily work assignments of personnel.</strong></p> <p><strong>Review work orders and support requests to determine safety requirements, permitting, and equipment needs.</strong></p> <p><strong>Manage all work order activity to ensure that all work is properly documented and submitted for recording.</strong></p> <p><strong>Provide reports and data - both required and ad hoc.</strong></p> <p><strong>Ensure adequate supplies and materials are ordered for department.</strong></p> <p><strong>Ensure personnel are properly trained in equipment operation.</strong></p> <p><strong>Monitor and evaluate performance of personnel.</strong></p> <p><strong>Perform additional duties and projects as assigned.</strong></p> <h4>Required</h4> <p><strong>Minimum acceptable experience level:</strong> Two (2) years’ experience with horizontal earthwork and material handling equipment including forklifts, cranes, loaders, bulldozers, skid steers, and semi-tractor trucks.</p> <p><strong>Knowledge, skills, and abilities:</strong></p> <ul> <li>Good time management skills and able to multi-task using various types of cranes and rigging gear.</li> <li>Knowledge of proper loading techniques and forklift weight capacities.</li> <li>Ability to lift up to 30 pounds, bend, stoop, and climb in and around construction type equipment and work in adverse climatic conditions.</li> <li>Ability to coordinate and complete basic Transportation Movement Request (TMR).</li> <li>Prior experience in working with a multi-national workforce.</li> <li>Ability to extract information to produce reports.</li> <li>Ability to communicate with a wide variety of colleagues and customers.</li> <li>Knowledge of principles and processes involved in supporting contract responsibilities at an overseas facility.</li> <li>Ability to work in a fast-paced environment that requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules.</li> <li>Cross-cultural sensitivity with an international perspective.</li> <li>Excellent organizational and time management skills.</li> <li>Computer skills, specifically in Microsoft Word and Excel.</li> <li>Ability to become an active and functioning member of a team.</li> <li>Ability to be innovative and be an agent for change.</li> <li>Expert communication skills to facilitate and disseminate information.</li> </ul> <p><strong>Education:</strong> A high school diploma or GED.</p> <p><strong>Passport, licenses and certifications:</strong> As part of pre-contingency requirements, by the time the visa process starts, candidates must possess a valid passport with a minimum of 18 months remaining to expiration date with 8 blank pages. Valid drivers’ license from home of record.</p> <p><strong>Security vetting:</strong> Already possess a US Government issued security clearance or Moderate Risk Public Trust (MRPT) or be able to obtain a favorable MRPT certification or US Government clearance prior to being hired is required for the position. Must maintain eligibility at the required certification or clearance level for the duration of the contract.</p> <p><strong>Language skills:</strong> Satisfactory English proficiency to meet job requirements and to adhere and comply with safety, health, and security measures.</p> <p><strong>Medical:</strong> Successfully complete and pass the medical and dental examinations as required by Amentum and our customer for deployment to Iraq. Must maintain physical and dental requirements for duration of deployment.</p> <h4>Desired</h4> <ul> <li>Relevant overseas contract experience.</li> <li>Previous work experience in harsh environmental conditions are a plus.</li> <li>Experience working with Amentum.</li> </ul> <h4>Other Responsibilities</h4> <p><strong>Safety</strong> - Amentum enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid/buddy aid responsibilities, participating in emergency response tasks, and serving on safety committees and teams.</p> <p><strong>Quality</strong> - Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the Amentum Quality Policy and carry out job activities in compliance with applicable Amentum Quality System documents and customer contracts. Each employee must read and understand his or her Quality Management and Customer Satisfaction responsibilities.</p> <p><strong>Procedure compliance</strong> - Each employee must read, understand, and implement the general and specific operational, safety, quality and environmental requirements of all plans, procedures and policies pertaining to job.</p> <h4>Working and Living Conditions</h4> <p>This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environment. Temperatures can reach 120-130 degrees Fahrenheit (50-55 degrees Celsius) during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to Iraq for extended periods.</p> <p>Work schedules are a minimum of 6 days per week and 10 hours per day, while some jobs have higher daily and weekly minimums. Employees must be willing and able to perform physical activities including, but not limited to, heavy lifting and moving of items, parts, assemblies, and equipment up to the safety regulation maximum; climbing in and out of equipment; crawling; and working outdoors. This includes being able to lift and carry 40 pounds of personal protective equipment for extended periods of time and being capable of running and ‘duck & cover’ during emergencies without putting oneself or others at risk.</p></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <div dir="rtl"><span>Ensure the readiness and safety of the bank buildings and facilities by implementing and following up on preventive and corrective maintenance tasks.<br> Main responsibilities: carry out basic maintenance works for electricity, lighting, plumbing, air conditioning, and facilities.<br> Monitor and address faults in the head office and branches.<br> Implement and follow up on preventive maintenance plans.<br> Coordinate with external maintenance companies and technicians when needed.<br> Monitor the quality of work by contractors and service providers.<br> Track maintenance needs, materials, and spare parts.<br> Record maintenance work and faults and prepare the necessary reports.<br> Adhere to safety procedures and bank policies.<br> Qualifications and experience: Diploma or Bachelor’s degree in technical fields or related practical experience.<br> Experience in maintenance and facilities work.<br> Basic knowledge of electricity, plumbing, and air conditioning.<br> Good skills in problem solving, communication, and organization.<br></span></div> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Job Description: Senior Maintenance Technician – Water Cup Production Line Department: Engineering and Maintenance Industry: Packaged Water / Water Cup Manufacturing Employment Type: Full-time Number of Vacancies: 2 Reports To: Maintenance Supervisor Supervisory Responsibility: Shift maintenance team when assigned Preferred Nationality: Indian/Iranian Job Purpose Provide senior-level, hands-on maintenance support for high-speed thermoforming/Form-Fill-Seal water cup production lines.<br> The Senior Maintenance Technician will lead shift maintenance work, diagnose complex faults, perform precision adjustments, and support preventive and major maintenance activities.<br> Key Responsibilities Implement daily, weekly, monthly, and shutdown maintenance plans.<br> Lead technicians during scheduled maintenance and production-line breakdowns.<br> Diagnose complex mechanical faults and production-related machine problems.<br> Perform machine setup, changeovers, adjustment, alignment, and synchronization.<br> Inspect machine condition and identify developing faults before failure occurs.<br> Carry out preventive, corrective, and major maintenance activities.<br> Escalate recurring faults and support root-cause analysis.<br> Record completed work, findings, parts used, and follow-up actions.<br> Identify future maintenance requirements and critical spare-parts needs.<br> Monitor recurring component failures and recommend technical improvements.<br> Assist with installation, commissioning, and overhaul work when required.<br> Train mechanical technicians and selected production operators.<br> Coordinate with production personnel during adjustment and test runs.<br> Assume responsibility for the maintenance team when the supervisor is unavailable.<br> Follow food-safety, personal-safety, lockout/tagout, and housekeeping requirements.<br> Required Technical Experience Candidates must have practical experience across the complete thermoforming/FFS water cup process: Film feeding, tracking, tensioning, and alignment Heating-zone inspection and adjustment Thermoforming stations, molds, vacuum, and cooling Filling systems, pumps, valves, nozzles, and volume adjustment Lid-film feeding, tracking, and tension control Heat-sealing temperature, pressure, timing, and alignment Cutting, punching, and cup-discharge mechanisms Pneumatic cylinders, solenoid valves, regulators, and air systems Bearings, chains, sprockets, timing belts, shafts, and gearboxes Linear guides, conveyors, lubrication systems, and mechanical alignment Candidates must be able to troubleshoot: Poor or incomplete cup forming Film tracking and alignment problems Water leakage and inaccurate filling volume Weak, incomplete, or uneven sealing Cutting and punching defects Mechanical timing and synchronization problems Abnormal vibration, noise, and overheating Repeated stoppages and intermittent machine faults Experience with Thermonox, Beta-Pak, or technically similar high-speed machines is strongly preferred.<br> Required Qualifications Technical diploma or equivalent qualification in Mechanical Maintenance, Mechanical Engineering, Mechatronics, or a related field.<br> Minimum 5–7 years of direct experience on thermoforming/FFS cup production machines.<br> Ability to lead maintenance work during shifts and breakdowns.<br> Strong practical knowledge of precision fitting, alignment, and adjustment.<br> Ability to interpret machine manuals, drawings, and spare-parts diagrams.<br> Basic ability to prepare maintenance records and technical reports.<br> Ability to train and guide junior technicians.<br> Willingness to work shifts and respond to urgent breakdowns.<br> Critical Selection Requirement Applicants must have direct experience maintaining machines that form, fill, and seal plastic water cups.<br> Experience limited to bottled-water lines, RO systems, vehicles, buildings, utilities, or general factory maintenance does not meet the position’s core requirement.<br></span> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Perform troubleshooting, diagnostics, maintenance, and services on all types of military and commercial generators and HVAC systems used by the U.S. Army to include the 150kW EPP III generators.</p><p>Perform maintenance and sustainment support on 3kW to 150kW, 500 0hz generators involving installation and removal of generators from fixed and mobile locations, troubleshoots and repair alternating current (AC) systems, direct current (DC) systems, electronic control systems and other program logic controls, electrical wiring and accessories. Perform overhaul, maintenance and sustainment support on 3kW to 150kW, 500 0hz generators involving installation and removal of generators from fixed and mobile locations, troubleshoots and repair alternating current (AC) systems, direct current (DC) systems, electronic control systems and other program logic controls, electrical wiring and accessories. Troubleshoot and repair HVAC, Chillers, and Environmental Control Units some are standalone units and others are mounted on trailers and vehicles. Maintain all types of commercial power generation equipment; military spec generators and Uninterrupted Power Systems (UPS). Operate a Load bank during testing Fabricate wire harnesses and solder terminals. Some work will be in a generator shop environment, and some work will be in a field environment. Other duties as assigned.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bring your Generator and HVAC expertise along with a drive for innovation to GDIT.</p><p>The Generator and HVAC Mechanic must have:</p><ul><li>Education: High School diploma</li><li>Experience: BA/BS plus 2 years experience, AA/AS/plus 4 years experience, or a High School diploma and 7 years experience</li><li>Technical skills: Extensive diesel generator experience. Knowledge of generator parallel systems and switch gear. Experience with brazing copper tubing and evacuating and recharging refrigerant.</li><li>Security Clearance: Secret</li><li>Role requirements: US passport must not expire for at least 2 years, valid US driver s license, and an international driver s permit (AAA). Ability to pass CRC to deploy.</li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $3.9B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. Responsibilities Key Responsibilities: + Train, advise, and assist IqAF personnel in operational scheduling, training management, and aircrew flight coordination procedures. + P lan and schedule F-16 aircrew flight training and aircraft sorties; manage simulator scheduling and daily flying schedules. + Provide oversight and technical assistance in managing flight data, tracking training qualifications, and updating operational reports. + Guide the use and interpretation of technical publications and scheduling tools (e.g., ARMS, ILIAS, and PEX). + Maintain and document accurate training records, flying hours, and operational logs; validate aircrew qualifications and unit flying hour programs. + Coordinate with aircraft maintenance, base operations, and SOF for up-to-date flight status, airfield operations, and mission requirements. + Perform additional operational tasks and support duties as directed by Site Management. Material &amp; Equipment Directly Used: Flight scheduling tools (ARMS, PEX, ILIAS), mission planning systems, UHF/VHF radios, classified tracking systems, Microsoft Office Suite, technical orders, and aircrew readiness documentation systems. Working Environment: Deployed operational environment in Iraq with exposure to office and flight line operations. Routine interaction with U.S. and foreign military personnel. High emphasis on flight safety, operational security, and cross-cultural team integration. Physical Activities: Frequent walking, standing, and coordination across operations and maintenance areas. Occasional lifting of documentation or scheduling systems tools. Worldwide travel, including deployment to the Middle East, required . Qualifications + Education: High school diploma or equivalent required . + Experience: 10+ years in aircrew operations, scheduling, and flight resource management (F-16 preferred). Direct experience working with IqAF and CLS program highly desirable. + Certifications: USAF Aviation Resource Management and/or SARM/HARM training preferred. + Other Requirements: U.S. Citizenship required; Secret clearance or interim acceptable; strong interpersonal, training, and communication skills; operational flexibility and readiness to support mission-critical tasks in deployed environments. What We Bring: + At V2X, we strive to be market competitive in our total reward offerings. + The successful candidate’s starting pay will be based on, but not limited to, their job-related skills, experience, qualifications, work location, and market conditions. + Please speak with a recruiter for additional information. + Employee benefits include the following: + Healthcare coverage + Retirement plan + Life insurance, AD&amp;D, and disability benefits + Wellness programs + Paid time off, including holidays + Learning and Development resources + Employee assistance resources + Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences</p> </div>

<p>Managing the office side of project execution on a day-to-day basis: ensuring sites have the materials, machinery, and approvals they need before they are required, and converting drawings, specifications, and bill of quantities into actionable, approved information; measuring what has been completed, documenting, certifying, and uploading it in the interim statements so the company receives its full dues on time. This role is the liaison between sites, suppliers, and the client consultant, and conveys this liaison in English.</p><p><strong>&nbsp; Tasks and responsibilities &nbsp;</strong></p><p><strong>First: Office logistics and procurement support</strong></p><p>▪&nbsp;&nbsp;&nbsp; Consolidate material requests from all sites into a single organized purchase plan, in sequence of the project schedule, rather than processing each request separately.</p><p>▪&nbsp;&nbsp;&nbsp; Prepare technical RFIs and RFQs, and obtain at least three quotes for each material or service of significant value.</p><p>▪&nbsp;&nbsp;&nbsp; Prepare technical and financial comparison tables, verify each quote against specifications, and raise recommendations to management for award.</p><p>▪&nbsp;&nbsp;&nbsp; Prepare internal purchase requests, follow up on issued purchase orders, fix delivery dates, and expedite any supplier that is delayed.</p><p>▪&nbsp;&nbsp;&nbsp; Maintain a material tracking log — what was requested, in transit, delivered, and still pending — and circulate weekly.</p><p>▪&nbsp;&nbsp;&nbsp; Identify long lead-time materials at the start of each project, and notify management in writing of any material threatening its planned delivery schedule.</p><p>▪&nbsp;&nbsp;&nbsp; Coordinate transport, hire machinery, and equipment movement between sites, and secure related permits.</p><p>▪&nbsp;&nbsp;&nbsp; Maintain a log of machinery and equipment: location, operating hours, fuel consumption, maintenance dates, and certificate validity.</p><p>▪&nbsp;&nbsp;&nbsp; Control minimum stock levels of consumables and monitor their distribution to sites against signed requests.</p><p><strong>Second: Delegation of works from the technical office</strong></p><p>▪&nbsp;&nbsp;&nbsp; Review drawings, specifications, and BOQs before work starts, raise RFI on any conflict to be resolved at the office, not on site.</p><p>▪&nbsp;&nbsp;&nbsp; Prepare as-built (Shop Drawings) and As-Built drawings, reinforcement schedules, and cutting lists.</p><p>▪&nbsp;&nbsp;&nbsp; Prepare and submit material submittals with their technical data, and maintain a log of their status and dates.</p><p>▪&nbsp;&nbsp;&nbsp; Issue the latest approved edition of each drawing to site, and withdraw obsolete editions from circulation.</p><p>▪&nbsp;&nbsp;&nbsp; Compile quantities from drawings and compare with the BOQ; define additional works before execution, not after.</p><p>▪&nbsp;&nbsp;&nbsp; Prepare method statements, ITPs, and material approval requests.</p><p>▪&nbsp;&nbsp;&nbsp; Review daily and weekly site reports, update progress against the schedule, and raise variances with reasons.</p><p><strong>Third: Measurement, interim payments, and cost control</strong></p><p>▪&nbsp;&nbsp;&nbsp; Prepare interim monthly progress certificates: measurement sheets, quantities, supporting documents, and a pictorial record, submitted on the contractual date.</p><p>▪&nbsp;&nbsp;&nbsp; Verify subcontractor interim payments against actual billed works, and certify only what is proven.</p><p>▪&nbsp;&nbsp;&nbsp; Prepare change orders and extension requests with supporting documents and cost analysis.</p><p>▪&nbsp;&nbsp;&nbsp; Maintain a comparison of actual cost vs budget for each item in the BOM and escalate any overruns when they occur, not at project close.</p><p>▪&nbsp;&nbsp;&nbsp; Reconcile material consumption with theoretical quantities from drawings and report waste or loss.</p><p><strong>Fourth: Subcontractors and suppliers</strong></p><p>▪&nbsp;&nbsp;&nbsp; Prepare scopes of work for subcontractors and RFQ packages, and compare bids on a comparable basis.</p><p>▪&nbsp;&nbsp;&nbsp; Maintain approved suppliers and subcontractors lists, with contact details, prices, and past performance records.</p><p>▪&nbsp;&nbsp;&nbsp; Monitor validity of subcontractor insurance and bonds, registrations, and work permits, and provide warnings before expiry.</p><p><strong>Fifth: Planning and reporting</strong></p><p>▪&nbsp;&nbsp;&nbsp; Maintain baseline schedule and update actual progress on agreed dates (MS Project or Primavera P6).</p><p>▪&nbsp;&nbsp;&nbsp; Prepare weekly and monthly progress reports, including the cumulative progress curve (S-Curve), labor and equipment curves, and pictorial log.</p><p>▪&nbsp;&nbsp;&nbsp; Maintain a log of action items arising from client, consultant, and internal meetings, and follow through to closure.</p><p>▪&nbsp;&nbsp;&nbsp; Contribute to preparing tender timelines, method of execution, and resource schedules accompanying bids.</p><p><strong>Sixth: Documentation and correspondences in English</strong></p><p>▪&nbsp;&nbsp;&nbsp; Draft technical correspondences, RFIs, approvals, transmittals, and progress reports in English with sound technical terminology.</p><p>▪&nbsp;&nbsp;&nbsp; Attend meetings with clients and consultants, present the technical position, and prepare meeting minutes.</p><p>▪&nbsp;&nbsp;&nbsp; Control project documentation: numbering, transmittal log, drawing register, and archiving all outgoing and incoming items in an organized manner.</p><p>▪&nbsp;&nbsp;&nbsp; Note: Company clients are international entities and organizations, and their contracts, specifications, and correspondences are in English only; thus English writing proficiency is a mandatory requirement for this role, not an added bonus.</p><p><strong>&nbsp; Qualifications and experience &nbsp;</strong></p><p>▪&nbsp;&nbsp;&nbsp; Bachelor’s degree in Civil Engineering (preferred), or Electrical or Mechanical Engineering, from a recognized university.</p><p>▪&nbsp;&nbsp;&nbsp; Valid membership in the Engineers Syndicate or equivalent in the work country.</p><p>▪&nbsp;&nbsp;&nbsp; Four (4) years of experience or more with a contracting company in the technical office or in project execution; design office experience alone is not a substitute.</p><p>▪&nbsp;&nbsp;&nbsp; Proficiency in English speaking and writing — mandatory. Arabic is the daily language for site coordination.</p><p>▪&nbsp;&nbsp;&nbsp; Proficiency in AutoCAD, advanced Excel, Word, and MS Project or Primavera P6; familiarity with Revit and BIM systems is a plus.</p><p>▪&nbsp;&nbsp;&nbsp; Ability to quantify accurately and read civil, structural, and MEP drawings and specifications.</p><p>▪&nbsp;&nbsp;&nbsp; Practical knowledge of FIDIC contracts and the structure of BOQs and certifying interim payments is a plus.</p><p>▪&nbsp;&nbsp;&nbsp; Valid driving license and willingness to travel to sites.</p><p><strong>&nbsp; Personal skills and competencies &nbsp;</strong></p><p>▪&nbsp;&nbsp;&nbsp; Numerical accuracy — this role deals with quantities that translate into money, and any miscalculation will cost later.</p><p>▪&nbsp;&nbsp;&nbsp; Organizational ability to manage multiple projects concurrently without neglecting any.</p><p>▪&nbsp;&nbsp;&nbsp; Proactive rather than reactive: procurement and submission ahead of need, not after work stops due to shortage.</p><p>▪&nbsp;&nbsp;&nbsp; Clear and proper English writing, enabling communication with the consultant without rephrasing the letter.</p><p>▪&nbsp;&nbsp;&nbsp; Discretion in dealing with prices, costs, profit margins, and supplier terms.</p><p>▪&nbsp;&nbsp;&nbsp; Ability to stand firm on a technical position under client or consultant pressure, and escalate to management instead of yielding.</p><p><strong>&nbsp;</strong></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Provide transportation (Cars) per request, send and receive mail among all Iraqi districts, organize shift schedule for drivers (local and company cars). Organize shift drivers (local and company car. Provide transportation for all department per request. Provide transportation for national and international staff from airport to office and opposite. Send and receive all mail and goods among Iraq. On call day and night.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Minimum: High School, or Diploma or equivalent.</li><li>Preferred: Bachelor's degree in Logistics, Supply Chain, Business Administration.</li><li>2-3 years in freight forwarding, transport operations, or logistics .</li><li>Computer Skills (Excel, Word and GPS/Transportation fleet Software or SP system).</li><li>Knowledge of transport documentation, route optimization, and maintenance schedules.</li><li>Language Skill (Arabic, Kurdish English is preferred).</li><li>Ability to work under pressure, negotiate rates, and manage customer service.</li></ul><p>Behavioral Competencies: Delivering Results &amp; Fostering Ownership Building Customer Value Technical Competencies: Transportation &amp; Fleet Management Route Planning &amp; Traffic Regulations Technical Writing and Reporting Documents &amp; Records Management Safety Management Problem Solving</p><p></p></section>

<p>The Mechanical & Hydraulic Technician (GSE) is responsible for carrying out preventive, corrective, and emergency maintenance on all Ground Support Equipment used in airport operations. This includes diesel engines, transmissions, hydraulic pumps, cylinders, hoses, valves, braking systems, chassis components, and all mechanical/hydraulic assemblies. The role ensures that GSE units remain safe, reliable, and operational to support continuous aircraft ground handling. Performs preventive and corrective maintenance on mechanical and hydraulic systems for all GSE, including: • Pushback tractors • Belt loaders • Baggage tractors • High-lift catering trucks • Lavatory/water service trucks • Ground Power Units (GPU – mechanical side) • Air Start Units (ASU – mechanical/hydraulic side) • Passenger stairs • All hydraulic-driven and mechanical-driven GSE Mechanical Maintenance Tasks • Engine repair and overhaul (diesel & gasoline) • Transmission repair (manual/automatic) • Cooling system service (radiators, hoses, thermostats) • Brake system service (air, hydraulic, mechanical) • Suspension & steering system repairs • Lubrication, oil/filter changes, belt replacement • Structural inspections (welding cracks, chassis damage) Hydraulic Maintenance Tasks • Hydraulic pump repair and replacement • Hydraulic cylinder rebuilding (seals, rods, pistons) • Valve block service and troubleshooting • Hose replacement, fitting installation, and leak rectification • System pressure testing and flow measurement • Hydraulic fluid flushing, bleeding, and contamination control Diagnostics & Technical Reporting • Uses mechanical and hydraulic diagnostic equipment • Identifies mechanical/hydraulic faults and root causes • Reads and interprets service manuals, diagrams, hydraulic schematics • Completes work orders, checklists, and maintenance reports accurately</p><p>A hands-on technician with 2-4 years of experience in heavy equipment, GSE, or hydraulic systems, capable of independently diagnosing and repairing mechanical and hydraulic faults, performing preventive maintenance, reading technical manuals, and ensuring GSE equipment remains safe, reliable, and operational in an airport environment. Education: Diploma in Mechanical Engineering Technology, Automotive Maintenance, or Hydraulic Systems. Experience: 2–4 years of experience in GSE, heavy vehicles, industrial machinery, or hydraulic systems, Strong understanding of engine, hydraulic, and mechanical systems, Airport GSE experience is desirable. Training Requirements: Mechanical & Hydraulic Systems Maintenance, Diesel Engine Repair Training, Hydraulic Troubleshooting. Computer Skills: MS office Language Skills (Eng., Arabic, other): Arabic and English Behavioral Competencies • Delivering Results & Fostering Ownership • Building Customer Value • Networking & Influencing Collaboratively • Leading Teams • Driving Change Technical Competencies • Diagnostic & Troubleshooting Techniques • Preventive & Corrective Maintenance • GSE Maintenance • Hydraulic and Mechanical Systems • Technical Reporting and Documentation</p>

<p>The Mechanical & Hydraulic Technician (GSE) is responsible for carrying out preventive, corrective, and emergency maintenance on all Ground Support Equipment used in airport operations. This includes diesel engines, transmissions, hydraulic pumps, cylinders, hoses, valves, braking systems, chassis components, and all mechanical/hydraulic assemblies. The role ensures that GSE units remain safe, reliable, and operational to support continuous aircraft ground handling. Performs preventive and corrective maintenance on mechanical and hydraulic systems for all GSE, including: • Pushback tractors • Belt loaders • Baggage tractors • High-lift catering trucks • Lavatory/water service trucks • Ground Power Units (GPU – mechanical side) • Air Start Units (ASU – mechanical/hydraulic side) • Passenger stairs • All hydraulic-driven and mechanical-driven GSE Mechanical Maintenance Tasks • Engine repair and overhaul (diesel & gasoline) • Transmission repair (manual/automatic) • Cooling system service (radiators, hoses, thermostats) • Brake system service (air, hydraulic, mechanical) • Suspension & steering system repairs • Lubrication, oil/filter changes, belt replacement • Structural inspections (welding cracks, chassis damage) Hydraulic Maintenance Tasks • Hydraulic pump repair and replacement • Hydraulic cylinder rebuilding (seals, rods, pistons) • Valve block service and troubleshooting • Hose replacement, fitting installation, and leak rectification • System pressure testing and flow measurement • Hydraulic fluid flushing, bleeding, and contamination control Diagnostics & Technical Reporting • Uses mechanical and hydraulic diagnostic equipment • Identifies mechanical/hydraulic faults and root causes • Reads and interprets service manuals, diagrams, hydraulic schematics • Completes work orders, checklists, and maintenance reports accurately</p><p>A hands-on technician with 2-4 years of experience in heavy equipment, GSE, or hydraulic systems, capable of independently diagnosing and repairing mechanical and hydraulic faults, performing preventive maintenance, reading technical manuals, and ensuring GSE equipment remains safe, reliable, and operational in an airport environment. Education: Diploma in Mechanical Engineering Technology, Automotive Maintenance, or Hydraulic Systems. Experience: 2–4 years of experience in GSE, heavy vehicles, industrial machinery, or hydraulic systems, Strong understanding of engine, hydraulic, and mechanical systems, Airport GSE experience is desirable. Training Requirements: Mechanical & Hydraulic Systems Maintenance, Diesel Engine Repair Training, Hydraulic Troubleshooting. Computer Skills: MS office Language Skills (Eng., Arabic, other): Arabic and English Behavioral Competencies • Delivering Results & Fostering Ownership • Building Customer Value • Networking & Influencing Collaboratively • Leading Teams • Driving Change Technical Competencies • Diagnostic & Troubleshooting Techniques • Preventive & Corrective Maintenance • GSE Maintenance • Hydraulic and Mechanical Systems • Technical Reporting and Documentation</p>

<p>The GSE Electrician Technician is responsible for performing electrical preventive, corrective, and emergency maintenance on all Ground Support Equipment across the airport. This includes 12V/24V/48V DC systems, AC electrical systems, control panels, sensors, alternators, starters, wiring harnesses, ECUs, and electrical components related to diesel/electric GSE. The role ensures the electrical systems of all GSE units are reliable, safe, and operational to support continuous airport operations. o Performs electrical maintenance and repair of all GSE electrical systems, including: o GPUs (400Hz/28V DC) electrical circuits o ASU electrical systems o Pushback tractors electrical/electronic components o Belt loaders, baggage tractors, and high-lift trucks o Lavatory/water trucks electrical systems o Battery-operated GSE o Troubleshoots electrical faults related to: o Fuses, relays, connectors o Alternators, starters, batteries o Controllers, ECUs, sensors o Switches, actuators, solenoids o Diagnoses electronic and CAN-BUS communication issues (if applicable). o Performs battery maintenance, load testing, and replacement. o Reads and interprets electrical diagrams, wiring schematics, and service manuals. o Uses multimeters, clamp meters, diagnostic scanners, and test equipment effectively. o Assists in overhauls, rebuilds, and electrical refurbishment of older GSE units. o Ensures electrical components are installed correctly and safely. o Supports installation of lighting, safety beacons, alarms, and electrical accessories on GSE. o Completes service reports, checklists, and work orders accurately. o Ensures electrical systems comply with OEM standards and airport safety rules.</p><p>A skilled Electrical Technician with 2-3 years of experience in GSE, heavy vehicles, or industrial equipment maintenance, possessing strong expertise in electrical troubleshooting, batteries, charging systems, wiring, and electronic controls. The candidate should be capable of independently diagnosing and repairing faults while ensuring equipment availability, operational reliability, and compliance with airport safety standards. Education: Diploma in Electrical Engineering Technology or Automotive Electrical Systems. Experience: Minimum 2–3 years of experience in electrical maintenance on GSE, heavy vehicles, or industrial equipment. Strong knowledge of DC/AC automotive electrical systems. Experience in fault finding, wiring, and control systems. Training Requirements: GSE Electrical Systems Training (OEM preferred) , Battery Maintenance & High-Amperage Safety, Airside Driving & Safety (recommended) Computer Skills: MS office Language Skills: Arabic and English Behavioral Competencies: • Delivering Results & Fostering Ownership • Building Customer Value • Networking & Influencing Collaboratively • Leading Teams • Driving Change Technical Competencies • Diagnostic & Troubleshooting Techniques • Preventive & Corrective Maintenance • GSE Maintenance • GSE Electrical Systems • Technical Reporting and Documentation</p>

<p>O &amp; M technician for daily job orders and team follow-up Daily task O&amp;M follow-up Network performances and KPI with outage follow-up Project implementations participations Daily reporting.</p><p>Technical knowledge (Power, Generators and cooling) maintenances and repair Preventive and correction process</p><p>Behavioral Competencies: Delivering Results &amp; Fostering Ownership. Building Customer Value.</p><p>Technical Competencies: Access Network Operations Network Monitoring Passive Network Operations Problem Solving Technical Writing and Reporting</p><p><strong>Desired Candidate Profile</strong></p><p>Mechanical /Electrical perp industry / technology institute 5-year experiences in field</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Collaborate with other departments locally and centrally in order to achieve business objectives. Ensure that all employees receive the designated food safety &amp; quality training. Deliver and share the training materials, templates, procedures. Conduct food and health and safety inspections and investigations by compiling and analyzing data of potential hazards, unsafe conditions or environmental concerns and share findings. Support in resolving serious customer complaint escalation processes locally. Support in coordination for withdrawals and recalls of products and serious incidents. Ensure the execution of all local food safety authority enforcement action is complied with. Monitor regulatory developments with a potential impact on local business entities and work with Sr. Food Safety &amp; Quality colleague to develop internal measures accordingly. Highlight procedures which need to be reviewed with respect to food safety due to operational or regulatory changes locally. Supports in food safety and quality of product assortment (own branded and private label), coordinates external laboratory testing, maintenance and prepares documentation for food product (product specification and product approvals, labelling, nutritional information, supplier information requests and audits), executes the mystery shopper and product sampling at store level. Provides regular reports to the relevant business stakeholders to support management review and ensure food safety objectives are met. Health &amp; Safety: Executes the H&amp;S inspection programme and be involved in audits and the close-out of corrective actions. Communicates regularly with staff to keep the team informed of H&amp;S priorities. Supports investigations into accidents and other reports (e.g. near misses). Coordinates with local operations and central team to ensure that there is a suitable maintenance plan to safeguard H&amp;S. Deliver H&amp;S training, make persuasive presentations by communicating technical information in a non-technical manner appropriate to the audience, while maintaining competency records for staff. Support incident management, non-conformance reporting, and corrective actions.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Degree in food science or related field.</li><li>Must have your own car + a valid driver's license.</li><li>3+ years of experience managing Food Safety and Quality/ Health and Safety in a large scale retail grocery, foodservice or manufacturing environment.</li><li>Fluent proficiency in Arabic and English.</li><li>Demonstrated ability to conduct risk assessments/evaluations and provide recommendations for risk mitigation or hazard identification.</li><li>Ability to maintain appropriate current knowledge of the HACCP,GMP, ISO 22000, and H&amp;S Standards.</li><li>Support supplier inspection and corrective action follow-up to closure of non-conformances.</li><li>Experience leveraging technology to manage processes.</li><li>Program management and experience of managing program change across multiple store locations.</li><li>Knowledge of food safety of local/regional laws and regulations and food trading standards.</li><li>Experience interacting and engaging with Authorities.</li><li>Demonstrated organizational skills and detailed orientation and ability to manage competing priorities.</li><li>Maintain effective working relationships and foster teamwork in a diverse work group.</li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br>About the opportunity<br><ul><li>Collaborate with other departments locally and centrally in order to achieve business objectives.</li><li>Ensure that all employees receive the designated food safety &amp; quality training. Deliver and share the training materials, templates, procedures.</li><li>Conduct food and health and safety inspections and investigations by compiling and analyzing data of potential hazards, unsafe conditions or environmental concerns and share findings.</li><li>Support in resolving serious customer complaint escalation processes locally.</li><li>Support in coordination for withdrawals and recalls of products and serious incidents.</li><li>Ensure the execution of all local food safety authority enforcement action is complied with.</li><li>Monitor regulatory developments with a potential impact on local business entities and work with Sr. Food Safety &amp; Quality colleague to develop internal measures accordingly.</li><li>Highlight procedures which need to be reviewed with respect to food safety due to operational or regulatory changes locally.</li><li>Supports in food safety and quality of product assortment (own branded and private label), coordinates external laboratory testing, maintenance and prepares documentation for food product (product specification and product approvals, labelling, nutritional information, supplier information requests and audits), executes the mystery shopper and product sampling at store level.</li><li>Provides regular reports to the relevant business stakeholders to support management review and ensure food safety objectives are met.</li></ul><p><br> <strong>Health &amp; Safety:</strong></p><br><br><ul><li>Executes the H&amp;S inspection programme and be involved in audits and the close-out of corrective actions.</li><li>Communicates regularly with staff to keep the team informed of H&amp;S priorities.</li><li>Supports investigations into accidents and other reports (e.g. near misses).</li><li>Coordinates with local operations and central team to ensure that there is a suitable maintenance plan to safeguard H&amp;S.</li><li>Deliver H&amp;S training, make persuasive presentations by communicating technical information in a non-technical manner appropriate to the audience, while maintaining competency records for staff.</li><li>Support incident management, non-conformance reporting, and corrective actions.</li></ul><br>What you need to be successful<br><ul><li>Degree in food science or related field.</li><li>Must have your own car + a valid driver's license.</li><li>3+ years of experience managing Food Safety and Quality/ Health and Safety in a large scale retail grocery, foodservice or manufacturing environment.</li><li>Fluent proficiency in Arabic and English.</li><li>Demonstrated ability to conduct risk assessments/evaluations and provide recommendations for risk mitigation or hazard identification.</li><li>Ability to maintain appropriate current knowledge of the HACCP,GMP, ISO 22000, and H&amp;S Standards.</li><li>Support supplier inspection and corrective action follow-up to closure of non-conformances.</li><li>Experience leveraging technology to manage processes.</li><li>Program management and experience of managing program change across multiple store locations.</li><li>Knowledge of food safety of local/regional laws and regulations and food trading standards.</li><li>Experience interacting and engaging with Authorities.</li><li>Demonstrated organizational skills and detailed orientation and ability to manage competing priorities.</li><li>Maintain effective working relationships and foster teamwork in a diverse work group.</li></ul><br>Who we are<br><p>Talabat is part of the Delivery Hero Group, the world’s pioneering local delivery platform, our mission is to deliver an amazing experience—fast, easy, and to your door. We operate in around 65 countries worldwide. Headquartered in Berlin, Germany.&nbsp;</p><br><br> <br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Company Description<br><p>Talabat is part of the Delivery Hero Group, the world’s pioneering local delivery platform, our mission is to deliver an amazing experience—fast, easy, and to your door. We operate in around 65 countries worldwide. Headquartered in Berlin, Germany.&nbsp;</p><br><br>Job Description<br><ul><li>Collaborate with other departments locally and centrally in order to achieve business objectives.</li><li>Ensure that all employees receive the designated food safety &amp; quality training. Deliver and share the training materials, templates, procedures.</li><li>Conduct food and health and safety inspections and investigations by compiling and analyzing data of potential hazards, unsafe conditions or environmental concerns and share findings.</li><li>Support in resolving serious customer complaint escalation processes locally.</li><li>Support in coordination for withdrawals and recalls of products and serious incidents.</li><li>Ensure the execution of all local food safety authority enforcement action is complied with.</li><li>Monitor regulatory developments with a potential impact on local business entities and work with Sr. Food Safety &amp; Quality colleague to develop internal measures accordingly.</li><li>Highlight procedures which need to be reviewed with respect to food safety due to operational or regulatory changes locally.</li><li>Supports in food safety and quality of product assortment (own branded and private label), coordinates external laboratory testing, maintenance and prepares documentation for food product (product specification and product approvals, labelling, nutritional information, supplier information requests and audits), executes the mystery shopper and product sampling at store level.</li><li>Provides regular reports to the relevant business stakeholders to support management review and ensure food safety objectives are met.</li></ul><p><br> <strong>Health &amp; Safety:</strong></p><br><ul><li>Executes the H&amp;S inspection programme and be involved in audits and the close-out of corrective actions.</li><li>Communicates regularly with staff to keep the team informed of H&amp;S priorities.</li><li>Supports investigations into accidents and other reports (e.g. near misses).</li><li>Coordinates with local operations and central team to ensure that there is a suitable maintenance plan to safeguard H&amp;S.</li><li>Deliver H&amp;S training, make persuasive presentations by communicating technical information in a non-technical manner appropriate to the audience, while maintaining competency records for staff.</li><li>Support incident management, non-conformance reporting, and corrective actions.</li></ul><br>Qualifications<br><ul><li>Degree in food science or related field.</li><li>Must have your own car + a valid driver's license.</li><li>3+ years of experience managing Food Safety and Quality/ Health and Safety in a large scale retail grocery, foodservice or manufacturing environment.</li><li>Fluent proficiency in Arabic and English.</li><li>Demonstrated ability to conduct risk assessments/evaluations and provide recommendations for risk mitigation or hazard identification.</li><li>Ability to maintain appropriate current knowledge of the HACCP,GMP, ISO 22000, and H&amp;S Standards.</li><li>Support supplier inspection and corrective action follow-up to closure of non-conformances.</li><li>Experience leveraging technology to manage processes.</li><li>Program management and experience of managing program change across multiple store locations.</li><li>Knowledge of food safety of local/regional laws and regulations and food trading standards.</li><li>Experience interacting and engaging with Authorities.</li><li>Demonstrated organizational skills and detailed orientation and ability to manage competing priorities.</li><li>Maintain effective working relationships and foster teamwork in a diverse work group.</li></ul><br><br> </div>

<p>The Mechanical &amp; Rotating QC Inspector is responsible for monitoring, supervising, and controlling all Quality Control activities related to mechanical static and rotating equipment within the AGUP2 Project CPF2 Package. He ensures that all contractual, technical, and quality requirements are properly implemented by the Contractor and Subcontractors during Construction, Pre-commissioning, and Commissioning phases. The position reports directly to the CPF2 Site QC Superintendent and works closely with Construction, Commissioning, QC disciplines, Vendors, and Contractor/Subcontractor teams .</p><p><strong>MAIN MISSIONS/RESPONSIBILITIES</strong></p><p><strong>Daily Inspection &amp; Reporting</strong></p><ul><li>Monitor and record all rotating equipment activities on a daily basis.</li><li>Conduct routine inspections in construction areas, equipment installation zones, and pre-commissioning areas.</li><li>Perform specific inspections on rotating machinery and associated installation activities.</li><li>Provide daily update and weekly reporting directly to the CPF2 Site QC Superintendent, covering:</li><ul><li>Inspection progress and key findings</li><li>Non-conformities and recurring defects</li><li>Critical issues requiring escalation or arbitration</li><li>Status of corrective actions</li><li>Quality trends and contractor performance indicators</li></ul><li>Contribute actively to daily/weekly QC coordination meetings and ensure the QC Superintendent receives all relevant data for consolidated site reporting.</li><li>Maintain up-to-date records, ITP follow-up, NCR/CAR tracking, and Mechanical Completion documentation enabling full visibility for the QC Superintendent.</li></ul><p><strong>Rotating Equipment Installation &amp; Inspection</strong></p><ul><li>Inspect rotating equipment such as: Pumps (centrifugal, reciprocating, screw), Compressors (reciprocating, centrifugal), Turbines, Electric motors, Blowers and fans</li><li>Verify foundations, grout, anchor bolts, leveling, and mounting conditions for rotating equipment.</li><li>Check alignment (cold/hot), coupling installation, run-out, and shaft rotation.</li><li>Verify lubrication systems, mechanical seals, and auxiliary systems.</li><li>Review and validate inspection reports, punch lists, and test results (vibration, performance, run-in).</li><li>Ensure compliance with vendor documentation, project specifications, and industry standards.</li></ul><p><strong>Pre-Commissioning &amp; Commissioning</strong></p><ul><li>Witness and verify rotating equipment pre-commissioning activities: Oil flushing, Lubrication system checks, Motor solo-run, Direction of rotation, Alignment verification</li><li>Participate in commissioning tests: Vibration analysis, Performance testing, Functional checks</li><li>Ensure all rotating equipment is ready for handover to Commissioning.</li></ul><p><strong>Documentation &amp; Compliance</strong></p><ul><li>Review and comment on Contractors' and Suppliers' ITPs, Method Statements, and procedures.</li><li>Ensure proper implementation of approved drawings, QC plans, surveillance plans, and ITPs.</li><li>Verify vendor documentation, equipment certification files, and material certificates.</li><li>Issue Quality Records, NCRs, and CARs when required.</li><li>Ensure proper traceability of inspections, tests, and mechanical completion documentation.</li></ul><p><strong>Welding, NDT &amp; Interfaces (Only where rotating equipment interfaces with piping or structural supports)</strong></p><ul><li>Coordinate with QC Welding, NDT, Piping, and Structural teams for interface inspections.</li><li>Verify NDT results related to rotating equipment supports, baseplates, and connected piping.</li><li>Ensure correct implementation of flange alignment and piping connection tolerances.</li></ul><p><strong>Non-Conformities &amp; Corrective Actions</strong></p><ul><li>Identify and report non-conformities or deviations in a timely manner.</li><li>Ensure corrective actions are implemented and verified.</li><li>Immediately escalate critical anomalies to the QC Superintendent.</li></ul><p><strong>Coordination &amp; Interface</strong></p><ul><li>Participate in daily/weekly construction and QC coordination meetings.</li><li>Interface with Construction, Commissioning, Engineering, Vendors, and Contractor QC teams.</li><li>Support technical clarifications and design queries with Engineering when required.</li><li>Participate in audits (Construction, HSE, QC) and site visits.</li><li>Ensure confidentiality of all documentation under responsibility.</li></ul><p><strong>Scope of Work</strong></p><p><strong>Rotating Equipment</strong></p><p>The Mechanical &amp; Rotating QC Inspector covers the following equipment categories:</p><ul><li><strong>Rotating Equipment</strong><ul><li>Centrifugal pumps</li><li>Reciprocating pumps</li><li>Screw pumps</li><li>Centrifugal compressors</li><li>Reciprocating compressors</li><li>Gas/steam turbines</li><li>Electric motors</li><li>Blowers and fans</li><li>Mechanical packages containing rotating components</li></ul></li><li><strong>Associated Systems</strong><ul><li>Alignment systems (laser, dial indicator)</li><li>Lubrication systems</li><li>Mechanical seals</li><li>Couplings</li><li>Vibration monitoring systems</li><li>Auxiliary systems (cooling, sealing, lubrication)</li></ul></li></ul><p><strong>Desired Candidate Profile</strong></p><p>Professional Experience Minimum 10 years of experience in Mechanical &amp; Rotating QC on major Oil &amp; Gas EPC projects. Strong experience with rotating equipment installation, alignment, and commissioning. Experience on CPF, refinery, or large industrial facilities is strongly preferred. Demonstrated ability in resource planning, decision-making, and team coordination.</p><p>Technical Competencies Solid knowledge of rotating equipment ( pumps, compressors, turbines, motors, fans ). Strong understanding of mechanical installation requirements ( alignment, foundations, couplings ). Ability to interpret standards, codes, specifications, and technical drawings. Proficiency with measuring instruments ( micrometers, calipers, dial indicators, laser alignment tools ). Knowledge of vibration analysis and performance testing. Understanding of NCR, deviation, and concession processes. Familiarity with digital QC systems ( Aconex, SharePoint, SmartPlant, or equivalent ) is a plus.</p><p>Behavioral Competencies Exemplary behavior regarding Company Code of Conduct and HSSE rules. Ensure that all HSSE training are completed and HSE rules implemented within his area of responsibility. Ability to represent the Company in discussions and meetings with Vendors, Contractors, and Subcontractors. High attention to detail and strong reporting discipline. Ability to work autonomously in a harsh, remote site environment. Leadership, team spirit, and resilience under pressure. Ability to transfer knowledge to team members. Fluent English (mandatory).</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Full Time <b>Massage Therapist</b> for a Day Spa in Iraq . <p> You must be permitted to work in this country.<br> Minimum experience required: over 2 years. <br>Salary: Negotiable based skills and experience <br>Location: Basra <br>Essential Qualifications: Degree <br>Start date: Immediately <br>Details:<br></p><br>Job Opportunity: VIP Spa &amp; Beauty Salon Professionals Needed A luxury, high-end VIP Ladies Salon ... Show More<br>Job Opportunity: VIP Spa &amp; Beauty Salon Professionals Needed<br> <br> A luxury, high-end VIP Ladies Salon &amp; Spa in Iraq is currently hiring top-tier professionals directly from The Philippines and Thailand for the following positions:<br> <br> 1. Female Physical Therapist / Massage Specialist (With professional degree/certification)<br> 2. Female Nail Technician (Specialized in Extensions, Nail Art, and Gel)<br> <br> Requirements:<br> * Minimum 3–5 years of experience in luxury spas, salons, or 5-star hotels.<br> * Good communication skills in English.<br> * Professional appearance and high hygiene standards.<br> <br> We Offer:<br> * Attractive tax-free salary + performance commissions.<br> * Free high-standard accommodation, transportation, and medical insurance.<br> * Free employment visa and round-trip flight ticket.<br> <br> How to Apply:<br> Please send your updated CV, a professional photo, and a short video (1-2 minutes) showcasing your work/technique via:<br> * WhatsApp: 009647822121385<br> * Email: <a href="/cdn-cgi/l/email-protection" class="__cf_email__" data-cfemail="4928273e3b33337870707d092e24282025672a2624">[email&nbsp;protected]</a><br> Show Less<br> <br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Computer Systems Analyst I provide several phases of the required systems analysis where the nature of the system is predetermined, uses established fact-finding approaches, knowledge of pertinent work processes and procedures, and familiarity with related computer programming practices, system software, and computer equipment.</p><p>This Analyst provides several phases of the required systems analysis where the nature of the system is predetermined, uses established fact-finding approaches, knowledge of pertinent work processes and procedures, and familiarity with related computer programming practices, system software, and computer equipment.</p><p>Carries out fact finding, and analyses as assigned, usually of a single activity or a routine problem, and applies established procedures where the nature of the system, feasibility, computer equipment and programming language have already been decided.</p><p>May assist a higher-level systems analyst by preparing the detailed specifications required by computer programmers from information developed by the higher-level analyst.</p><p>May research routine user problems and solve them by modifying the existing system when the solutions follow clear precedents.</p><p>Prepare cost and deadline estimates as required for review.</p><p>Works independently to adapt guides to specific situations; resolve problems and deviations according to established practices; and obtain advice where precedents are unclear or not available.</p><p>Carries out objectives, priorities and deadlines as defined by the supervisor.</p><p>May supervise technician and others who assist in specific assignments.</p><p>Will have some variation within and across contracts and may list additional or specific job duties related to assigned function/level which are not aforementioned.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>High School Diploma or Equivalent is required. Certification of education level is required.</li><li>CompTIA Security+ Certification.</li><li>Must possess Two (2) years of related experience in computer systems analysis.</li><li>Ability to obtain and maintain a US Government SECRET Clearance is required. (Prefer active Secret clearance). US Citizenship is required for SECRET clearance at this work location.</li><li>A valid U.S. Passport is required to travel internationally. Passport must have a minimum of 6 blank pages and 2 plus year validity on expiration date of passport.</li><li>Must be able to pass CENTCOM medical requirements for deployment.</li><li>Must be able to obtain a visa in CENTCOM locations.</li></ul><p>Requires competence in most phases of system analysis.</p><p>Systems analysis and design skills in an area such as a record keeping or scientific operation.</p><p>Knowledge of pertinent system software and computer equipment.</p><p>Knowledge of work processes, applicable regulations, and practices of the assigned subject-matter area.</p><p>Ability to recognize probable interactions of related computer systems and predict impact of a change in assigned system.</p><p>Good problem-solving skills.</p><p>Self-motivated and the ability to work independently.</p><p>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</p><p>Must be able to lift/push/pull minimum of 50 pounds.</p><p>May work in maintenance shop or outside.</p><p>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</p><p>May be exposed to extreme noise from operating equipment.</p><p>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</p><p>May be expected to work in austere environments and all weather conditions.</p><p></p></section>