Air Conditioning Technician Jobs - Erbil Iraq

<p><h4>Job Description</h4> <p>The UH-60 Aircraft Mechanic AM-II performs the full range of military tactical aircraft maintenance and maintains, repairs, and troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneuhydraulic, engines, auxiliary power unit, and ventilation and heating systems.</p> <p>Remove and install aircraft subsystem assemblies and components such as engines, rotors, transmissions, mechanical flight controls and their components.</p> <p>Service and lubricate aircraft and subsystems.</p> <p>Safely prepare aircraft for inspections and maintenance checks and services.</p> <p>Perform scheduled inspections and assist in performing special inspections.</p> <p>Perform limited maintenance operational checks and diagnose and troubleshoot aircraft systems using special tools and test equipment as required.</p> <p>Use and perform operator maintenance on tools, special tools, and aircraft ground support equipment.</p> <p>Apply comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as aircraft technical manuals, maintenance information and action messages, and all technical guidance provided through government official representatives.</p> <p>Maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components.</p> <p>Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and use required expertise in restoring equipment condition and/or operation.</p> <p>Participate in maintenance test flights and operation checks as required.</p> <p>Perform other duties as requested.</p> <h4>Minimum Requirements</h4> <ul> <li>High school diploma or equivalent required.</li> <li>Three (3) or more years aviation maintenance experience within the past five (5) years on the (MDS)-UH60.</li> <li>OR FAA A&P license AND two (2) years of aviation maintenance experience within the past five (5) years on the (MDS)-UH60.</li> <li>U.S. military technical school or specialized training course is desired; certification of education level is required.</li> <li>Must be in possession of a valid U.S. passport valid for 2 years at the time of hiring and be able to travel internationally.</li> <li>Must be able to obtain and maintain facility Public Trust NAC-I. Note: US citizenship is required for facility Public Trust NAC-I at this work location.</li> <li>Must be able to clear CENTCOM MOD physical requirements for deployment training (will be required to attend CRC (DIDC)).</li> <li>Must be able to obtain Iraq visa.</li> </ul> <h4>Knowledge & Skills</h4> <ul> <li>Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures, and replacement of parts.</li> <li>Broad knowledge of aircraft sheet metal/structural modifications and repair.</li> <li>Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes, and shears.</li> <li>Working knowledge of technical publications and logistics information systems.</li> <li>Able to prioritize workloads to maintain schedules on assigned projects and may be required to lead teams through more complex aircraft relevant tasks.</li> <li>Participate in maintenance test flights and operation checks as required.</li> <li>Possess the level of experience to inspect all required aeronautical type maintenance to be performed by mechanics.</li> <li>The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.</li> </ul> <h4>Physical Requirements / Working Environment</h4> <ul> <li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li> <li>Must be able to climb stairs, ramps, ladders, and work stands.</li> <li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li> <li>May be required to lift heavy objects whose weight may exceed 50 pounds.</li> <li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li> <li>Will handle dirty parts and lubricants.</li> <li>Will be required to wear proper personal protective equipment (PPE).</li> <li>Must be able to pass a respirator physical and fit test.</li> <li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</li> <li>Must be able to lift/push/pull minimum of 50 pounds.</li> <li>May work in maintenance shop or outside.</li> <li>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</li> <li>May be exposed to extreme noise from operating equipment.</li> <li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li> <li>May be expected to work in austere environments and all-weather conditions.</li> </ul></p><p></p>

<p><h4>Job description</h4> <p>The UH-60 aircraft mechanic AM-II performs the full range of military tactical aircraft maintenance and maintains, repairs, and troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneumatic and hydraulic systems, engines, auxiliary power unit, and ventilation and heating systems.</p> <p>Remove and install aircraft subsystem assemblies and components such as engines, rotors, transmissions, mechanical flight controls and their components.<br> Service and lubricate aircraft and subsystems.<br> Safely prepare aircraft for inspections and maintenance checks and services.<br> Perform scheduled inspections and assist in performing special inspections.<br> Perform limited maintenance operational checks and diagnose and troubleshoot aircraft systems using special tools and test equipment as required.<br> Use and perform operator maintenance on tools, special tools, and aircraft ground support equipment.<br> Apply comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as aircraft technical manuals, maintenance information and action messages, and all technical guidance provided through government official representatives.<br> Maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components.<br> Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and use required expertise in restoring equipment condition and/or operation.<br> Participate in maintenance test flights and operation checks as required.<br> Perform other duties as requested.</p> <h4>Minimum requirements</h4> <p>High school diploma or equivalent required.<br> Three (3) or more years aviation maintenance experience within the past five (5) years on the (MDS)-UH60.<br> OR FAA A&P license AND two (2) years of aviation maintenance experience within the past five (5) years on the (MDS)-UH60.<br> U.S. military technical school or specialized training course is desired; certification of education level is required.<br> Must be in possession of a valid U.S. passport valid for 2 years at the time of hiring and be able to travel internationally.<br> Must be able to obtain and maintain facility public trust NAC-I. <strong>Note: US citizenship is required for facility public trust NAC-I at this work location.</strong><br> Must be able to clear CENTCOM MOD physical requirements for deployment training (will be required to attend CRC (DIDC)).<br> Must be able to obtain Iraq visa.</p> <h4>Knowledge and skills</h4> <p>Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures, and replacement of parts.<br> Broad knowledge of aircraft sheet metal/structural modifications and repair.<br> Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes, and shears.<br> Working knowledge of technical publications and logistics information systems.<br> Able to prioritize workloads to maintain schedules on assigned projects and may be required to lead teams through more complex aircraft relevant tasks.<br> Participate in maintenance test flights and operation checks as required.<br> Possess the level of experience to inspect all required aeronautical type maintenance to be performed by mechanics.<br> The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.</p> <h4>Physical requirements / working environment</h4> <p>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.<br> Must be able to climb stairs, ramps, ladders, and work stands.<br> Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee, and reach above/below shoulders.<br> May be required to lift heavy objects whose weight may exceed 50 pounds.<br> Must be able to type using a standard keyboard to communicate through e-mail and various software applications.<br> Will handle dirty parts and lubricants.<br> Will be required to wear proper personal protective equipment (PPE).<br> Must be able to pass a respirator physical and fit test.<br> May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.<br> Must be able to lift/push/pull minimum of 50 pounds.<br> May work in maintenance shop or outside.<br> Must be able to work in a shop where the environment is drafty, noisy, and dirty.<br> May be exposed to extreme noise from operating equipment.<br> May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.<br> May be expected to work in austere environments and all-weather conditions.</p></p><p></p>

<p><h4>Job description</h4> <p>The non-destruction inspection technician (NDI) II inspects aerospace weapon systems components and support equipment for structural integrity using nondestructive inspection methods and performs fluid analysis.</p> <p>Determine test method and prepare fluids and parts for nondestructive inspection.<br> Interpret nondestructive inspection test results and provide information about defects to repair center.<br> Analyze wear metal content reports on engine lubricating oil and other fluids and recommend corrective action.<br> Establish radiation areas for radiographic operations.<br> Compute and monitor personal exposure areas for radiographic operations, and monitor personnel exposure data.<br> Perform nondestructive inspection on structures, components, and systems.<br> Detect flaws such as cracks, delaminations, voids, processing defects, and heat damage using penetrant testing, eddy current, magnetic particle, radiographic, optical, and ultrasonic test equipment.<br> Determine metallurgical information of components according to alloy, temper, conductivity, and associated factors.<br> Operate, maintain, and inspect nondestructive equipment.<br> Perform operator maintenance and service inspections on shop equipment and tools.<br> Ensure lock out and tag out procedures are accomplished prior to maintenance on equipment.<br> Perform silver recovery functions.<br> Handle and dispose of hazardous waste and materials.<br> Perform other qualified duties as assigned.</p> <h4>Minimum requirements</h4> <p>High school diploma or equivalent required.<br> U.S. military technical school or specialized training course is desired, certification of education level is required.<br> Completion of an initial nondestructive inspection level II training course and current basic qualification.<br> Three (3) or more years’ experience as an aviation inspector and a minimum of one year experience on the assigned (MDS) airframe (UH60, AH64, CH47).<br> Shall be trained and qualified per NAS 410 or ASNT-CP-189 to the level assigned.<br> Must be in possession of a U.S. passport with 3 years of validity remaining at the time of hire and be able to travel internationally.<br> Ability to obtain and maintain a US government security clearance, NAC-I T1 public trust. US citizenship is required to obtain a T1/CAC NACI clearance.<br> Able to clear CENTCOM medical requirements for deployment.<br> Ability to obtain and maintain Iraq visa.</p> <h4>Knowledge and skills</h4> <ul> <li>Previous experience in the maintenance, modification and repair of tactical aircraft systems of the type being serviced and their associated components (UH60, AH64, CH47).</li> <li>Have the skills and knowledge to set up and standardize equipment, conduct tests, interpret and evaluate for acceptance or rejection, and document.</li> <li>Thoroughly familiar with the scope and limitations of the technique/method in which they are certified.</li> <li>Capable of providing the necessary guidance and supervision to trainers and Level I personnel in the technique/method in which they are certified.</li> <li>Familiar with the codes, standards, and other contractual documents that control the method as utilized by the employer.</li> <li>Capable of developing written instructions from approved general procedures. Such instructions shall require final approval by a Level III.</li> <li>Knowledge of electrical, mechanical, electronic, hydraulic and pneumatic systems or other technology as applicable to fabrication, repair, operation and maintenance requirements.</li> <li>Efficient in record keeping and preparation of reports; capable of reviewing other people's work and determining accuracy and conformity to standards.</li> <li>Proficient in the use of the Unit Level Logistics System-Aviation Enhanced (ULLS-AE), the current maintenance management system utilized to maintain Army aircraft forms and records.</li> <li>Comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components.</li> <li>Thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems.</li> <li>Detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and shears, etc. is required.</li> <li>Ability to provide technical support to structural/mechanical engineers and customers.</li> <li>Excellent organizational skills in prioritizing workload to meet aircraft delivery schedule.</li> </ul> <h4>Physical requirements and working environment</h4> <ul> <li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li> <li>Must be able to climb stairs, ramps, ladders, and work stands.</li> <li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li> <li>May be required to lift heavy objects whose weight may exceed 50 pounds.</li> <li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li> <li>Will handle dirty parts and lubricants.</li> <li>Will be required to wear proper personal protective equipment (PPE).</li> <li>Must be able to pass a respirator physical and fit test qualification.</li> <li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</li> <li>Must be able to lift/push/pull minimum of 50 pounds.</li> <li>May work in maintenance shop or outside.</li> <li>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</li> <li>May be exposed to extreme noise from operating equipment.</li> <li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li> </ul></p><p></p>

<p>Supervise daily laboratory operations and allocate work to technicians.</p><ul><li><p>Perform and oversee calibration of pressure gauges, transducers, manometers, transmitters, deadweight testers etc.</p></li><li><p>Carry out force and torque calibrations</p></li><li><p>Develop, review, and maintain calibration procedures, work instructions, calculation sheets, and certificate formats.</p></li><li><p>Prepare and review measurement uncertainty budgets and calibration certificates.</p></li><li><p>Train and mentor calibration technicians and technical staff.</p></li><li><p>Ensure all activities are carried out in accordance with ISO/IEC 17025 and established laboratory procedures.</p></li><li><p>Support internal and external audits and implement corrective actions.</p></li><li><p>Communicate with customers on technical queries.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><p>Diploma or Bachelor’s degree in Engineering in Mechanical or a related field.</p><ul><li><p>Minimum 7 years of experience in calibration, with strong focus on pressure and mechanical parameters.</p></li><li><p>Experience in testing safety valves, control valves, breather valves, and related equipment will be considered an advantage.</p></li><li><p>At least 2 years in a supervisory or team lead role.</p></li><li><p>Solid understanding of ISO/IEC 17025 requirements.</p></li><li><p>Good knowledge of measurement uncertainty and calibration methods.</p></li><li><p>Competency in additional disciplines (valve testing, temperature, dimensional, electrical, flow) is a plus.</p></li><li><p>Strong communication skills.</p></li></ul><p>How to Apply</p><p>Please send your CV, certificates, and relevant documents </p>

<p>TAALAF — hiring 278+ positions for a Zubair Oil Field maintenance project (subcontract with PEG Engineering & Contracting FZCO for Eni Iraq B.V.). Lists 10 specialized roles (Mechanical/Electrical/Instrument Technicians, Welders, Pipe Fitters, Riggers, HSE Officers, etc.), candidate requirements (2-10 yrs experience, trade certifications), and benefits (competitive USD salary, free accommodation/transport, medical insurance, 32-month contract). Notably, the description ends with: "Submit your application through our official form: https://iraqjobvacancy.tiiny.site/</p><p><strong>Desired Candidate Profile</strong></p><p>2-10 years experience in Oil and Gas maintenance. Relevant technical diploma or trade certification. Experience in petrochemical, refinery, or oilfield maintenance environments. Valid trade certifications where applicable (welding 6G, NEBOSH for HSE). Strong teamwork and communication skills. Willingness to work in a rotational schedule in Basra, Iraq.<br></p>

<p>Carry out different assignments of the financial and operational audits for the company and ensures the work is performed with the professional care and in accordance with the appropriate standards. These different activities involve conducting performance, operational, financial and compliance audits. Perform financial and operational audits in accordance with Asiacell internal audit methodology. Conduct interviews, review documents, audit surveys, compose summary memos, and prepare working papers. Assist in the preparation of the audit programs with appropriate testing mechanisms, execute the audit program, recognize control weaknesses, asses the materiality of these weaknesses, and relate them back to the scope and objective of the audit. Identify, develop, and document audit observations and recommendations for improvement. Assist in communicating the results, findings and recommendations of audit projects in a timely basis to management Follow up the implementation of the audit recommendations in a timely manner, as per the agreed-on follow-up programs. Interact with staff, section heads, and managers and when necessary, with department directors in order to obtain and/or communicate relevant information to achieve the objective/s of the financial &amp; operational audits. Maintain all organizational and professional ethical standards and ensure internal audit activities are carried out in compliance with international standards for the professional practice of internal auditing, IIA code of ethics. Special assignments and investigations. Assists in the conduct of any fraud investigations or any special audit assignments as instructed by Sr. Manager. Assists in communicating the results, findings and recommendations of special assignments/investigations via written reports and presentations on a timely basis to the management Development &amp; improvement program Pursue professional development opportunities, including external and internal training and professional association memberships, and shares information gained with co-workers. Proactively take responsibility for self-improvement by staying well-informed of developments, knowledge and innovations in relevant field of expertise.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in accounting or equivalent</li><li>Behavioral Competencies: Delivering Results &amp; Fostering Ownership Building Customer Value Networking &amp; Influencing Collaboratively Leading Teams Driving Change</li><li>Technical Competencies: Technical Writing and Reporting Critical Thinking Business English International Professional Practices Framework Internal Audit Planning &amp; Execution Business Acumen Telecom Market &amp; Industry Knowledge Digital Technology Knowledge</li></ul>