Electronics Technician Jobs in Iraq

<p><h4>Essential responsibilities:</h4> <p>Aerostat operators/user-level maintainers will participate in the overall, hands-on operation of the aerostat system including launch, in-flight, recovery, and moored activities.</p> <p>Candidates will perform all functions to operate the PGSS/PTDS, an aerostat mounted intelligence, surveillance, and reconnaissance (ISR) platform, its mobile mooring platform (MMP), sensor payload(s), communications and navigation systems as well as associated support equipment (boom lift, forklift, all terrain vehicles (ATVs), and electrical power generators).</p> <p>Candidate will perform user-level maintenance functions including performing hands-on preventative maintenance checks and services (PMCS), troubleshooting, removing and replacing line replaceable units (LRUs), and removing and replacing payloads.</p> <p>Candidate must possess a diverse range of skills with the ability to quickly adapt to new situations. Tasks will be performed under direction of higher classified technicians and/or site personnel.</p> <h4>Minimum requirements:</h4> <ul> <li>High school diploma or equivalent is required.</li> <li>Two-year associate’s degree in a technical field from an accredited college can substitute for work experience.</li> <li>Must have an active secret US government clearance or the ability to obtain a secret clearance. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must have a valid U.S. passport with a minimum of one year remaining.</li> <li>Must have valid US driver’s license.</li> <li>Knowledge of and experience in the operations of hardware systems and components.</li> <li>Experience in fault detection, isolation, and correction of hardware systems and individual components.</li> <li>Ability to perform routine system maintenance and analysis functions including: hardware configurations; adding, removing and replacing hardware components; use of hardware and software diagnostic testing tools; reading of electronic circuit schematics; and repairing printed circuit boards.</li> <li>At least one (1) year previous aerostat experience OR two (2) years of experience in the following areas may be substituted in lieu of aerostat experience:</li> </ul> <p><strong>1) Electrical maintenance mechanic</strong></p> <ul> <li>Possess at least two (2) years aerostat experience as an operator at the 20 series level or greater from Army MOS 35F (Intelligence Analyst), 35G (Geospatial Intelligence Imagery Analyst), 35H (Common Ground System Analyst), 96R (Ground Surveillance Systems Operator), 96U (Unmanned Aerial Vehicle Operator), or military branch equivalent.</li> <li>Two years of hands-on experience in performing operations and maintenance tasks either on an aerostat system or a related industry/military equivalent is required.</li> <li>Must be qualified at the 10 series or greater level (via military or civilian technical schools) is required.</li> <li>Ability to read electronic schematics.</li> <li>O&M of electro-mechanical equipment to include one or more of the following: <ul> <li>Hydraulic/servo valves</li> <li>Hydraulic actuators, control systems</li> <li>Test and diagnostic equipment</li> </ul> </li> </ul> <p><strong>2) Networking, IT & information systems</strong></p> <ul> <li>Two years’ experience is required.</li> <li>Must be qualified at the 10 series or greater level; MOS 25B/F or other military branch equivalent or industry occupational specialties as a CISCO Network Administrator; Army MOS 25L/N or other military branch equivalent or industry occupational specialties as a Network Installation (BICSI or Network + or Comp T Certification) will be considered.</li> <li>CCIE certification with fiber optic certification is preferred.</li> </ul> <p><strong>3) Mechanical maintenance</strong></p> <ul> <li>Mechanical maintenance with qualifications at the 10 series or greater from U.S. Army MOS 94D/X and 91/B/S/W or other military branch equivalent, or industry occupational specialties such as National Institute for Automotive Service Excellence (ASE) Certified Truck Mechanic or Federal Aviation Administration (FAA) General Mechanic 1 or greater.</li> <li>Two years of hands-on experience on an aerostat system or a related industry/military equivalent is required.</li> <li>O&M of mechanical equipment to include one or more of the following: hydraulic systems, winch systems, tether/cable handling systems, industrial generator sets, power switch gear, HVAC, cranes aerial lift, forklift, industrial generator sets.</li> </ul> <h4>Physical requirements:</h4> <ul> <li>Requires the ability to regularly lift up to 50 lbs.</li> <li>Requires the ability to regularly climb extension ladders, roof ladder, stepladders, and stairs at least 10 times during shift.</li> <li>Requires the flexibility to bend/stoop, squat repetitive during shift.</li> <li>Requires the ability to regularly kneel repetitive for shift.</li> <li>Requires the ability to move in a 90-degree fashion on a repetitive basis for shift.</li> <li>Requires the ability to stretch/reach on a repetitive basis for shift.</li> <li>Requires the ability to walk extensively throughout the plant during shift.</li> <li>Requires the ability to interact with all clients in a professional and friendly manner despite periods of stress.</li> </ul> <h4>Medical requirements:</h4> <p>Successfully complete and pass the medical and dental examinations as required by the employer and customer for deployment to Iraq.</p> <p>Must maintain physical and dental requirements for the duration of the deployment.</p> <h4>Working and living conditions:</h4> <p>This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environment. Temperatures can reach 120-130 degrees Fahrenheit/50-55 degrees Celsius during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to CENTCOM, EUCOM, and AFRICOM for extended periods. Work schedules are a minimum of 6 days per week and 10 hours per day, while some jobs have higher daily and weekly minimums.</p></p><p></p>

<p><h4>Essential responsibilities:</h4> <p>Aerostat operators/user-level maintainers will participate in the overall, hands-on operation of the aerostat system including launch, in-flight, recovery, and moored activities.</p> <p>Candidates will perform all functions to operate the PGSS/PTDS, an aerostat mounted intelligence, surveillance, and reconnaissance (ISR) platform, its mobile mooring platform (MMP), sensor payload(s), communications and navigation systems as well as associated support equipment (boom lift, forklift, all terrain vehicles (ATVs), and electrical power generators).</p> <p>Candidate will perform user-level maintenance functions including performing hands-on preventative maintenance checks and services (PMCS), troubleshooting, removing and replacing line replaceable units (LRUs), and removing and replacing payloads.</p> <p>Candidate must possess a diverse range of skills with the ability to quickly adapt to new situations. Tasks will be performed under direction of higher classified technicians and/or site personnel.</p> <h4>Minimum requirements:</h4> <ul> <li>High school diploma or equivalent is required.</li> <li>Two-year associate’s degree in a technical field from an accredited college can substitute for work experience.</li> <li>Must have an active secret US government clearance or the ability to obtain a secret clearance. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must have a valid U.S. passport with a minimum of one year remaining.</li> <li>Must have valid US driver’s license.</li> <li>Knowledge of and experience in the operations of hardware systems and components.</li> <li>Experience in fault detection, isolation, and correction of hardware systems and individual components.</li> <li>Ability to perform routine system maintenance and analysis functions including: hardware configurations; adding, removing and replacing hardware components; use of hardware and software diagnostic testing tools; reading of electronic circuit schematics; and repairing printed circuit boards.</li> <li>At least one (1) year previous aerostat experience OR two (2) years of experience in the following areas may be substituted in lieu of aerostat experience:</li> </ul> <p><strong>1) Electrical maintenance mechanic</strong></p> <ul> <li>Possess at least two (2) years aerostat experience as an operator at the 20 series level or greater from Army MOS 35F (Intelligence Analyst), 35G (Geospatial Intelligence Imagery Analyst), 35H (Common Ground System Analyst), 96R (Ground Surveillance Systems Operator), 96U (Unmanned Aerial Vehicle Operator), or military branch equivalent.</li> <li>Two years of hands-on experience in performing operations and maintenance tasks either on an aerostat system or a related industry/military equivalent is required.</li> <li>Must be qualified at the 10 series or greater level (via military or civilian technical schools) is required.</li> <li>Ability to read electronic schematics.</li> <li>O&M of electro-mechanical equipment to include one or more of the following: <ul> <li>Hydraulic/servo valves</li> <li>Hydraulic actuators, control systems</li> <li>Test and diagnostic equipment</li> </ul> </li> </ul> <p><strong>2) Networking, IT & information systems</strong></p> <ul> <li>Two years’ experience is required.</li> <li>Must be qualified at the 10 series or greater level; MOS 25B/F or other military branch equivalent or industry occupational specialties as a CISCO Network Administrator; Army MOS 25L/N or other military branch equivalent or industry occupational specialties as a Network Installation (BICSI or Network + or Comp T Certification) will be considered.</li> <li>CCIE certification with fiber optic certification is preferred.</li> </ul> <p><strong>3) Mechanical maintenance</strong></p> <ul> <li>Mechanical maintenance with qualifications at the 10 series or greater from U.S. Army MOS 94D/X and 91/B/S/W or other military branch equivalent, or industry occupational specialties such as National Institute for Automotive Service Excellence (ASE) Certified Truck Mechanic or Federal Aviation Administration (FAA) General Mechanic 1 or greater.</li> <li>Two years of hands-on experience on an aerostat system or a related industry/military equivalent is required.</li> <li>O&M of mechanical equipment to include one or more of the following: hydraulic systems, winch systems, tether/cable handling systems, industrial generator sets, power switch gear, HVAC, cranes aerial lift, forklift, industrial generator sets.</li> </ul> <h4>Physical requirements:</h4> <ul> <li>Requires the ability to regularly lift up to 50 lbs.</li> <li>Requires the ability to regularly climb extension ladders, roof ladder, stepladders, and stairs at least 10 times during shift.</li> <li>Requires the flexibility to bend/stoop, squat repetitive during shift.</li> <li>Requires the ability to regularly kneel repetitive for shift.</li> <li>Requires the ability to move in a 90-degree fashion on a repetitive basis for shift.</li> <li>Requires the ability to stretch/reach on a repetitive basis for shift.</li> <li>Requires the ability to walk extensively throughout the plant during shift.</li> <li>Requires the ability to interact with all clients in a professional and friendly manner despite periods of stress.</li> </ul> <h4>Medical requirements:</h4> <p>Successfully complete and pass the medical and dental examinations as required by the employer and customer for deployment to Iraq.</p> <p>Must maintain physical and dental requirements for the duration of the deployment.</p> <h4>Working and living conditions:</h4> <p>This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environment. Temperatures can reach 120-130 degrees Fahrenheit/50-55 degrees Celsius during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to CENTCOM, EUCOM, and AFRICOM for extended periods. Work schedules are a minimum of 6 days per week and 10 hours per day, while some jobs have higher daily and weekly minimums.</p></p><p></p>

<p><h4>Purpose and scope:</h4> <p>The site manager has overall responsibility for cost, schedule and technical performance of the operation. Accountable for production, supply, production control/planning and quality management aspects of operation. Acts as primary point of contact for customers at the work site level.</p> <h4>Essential responsibilities:</h4> <li>Provides direction and leadership to all site assigned personnel.</li> <li>Prepares and submits site labor/non-labor budgets, forecast estimated costs and control subcontractors.</li> <li>Controls service contracts in support of site operations.</li> <li>Manages all department managers/staff assigned to site operations.</li> <li>Manages and coordinates research and investigations into business problems.</li> <li>Provides guidance and assistance relative to operating problems and projects.</li> <li>Performs all other position related duties as assigned or requested.</li> <h4>Minimum position knowledge, skills, and abilities required:</h4> <li>Bachelor's degree or equivalent combination of academic, technical or military training and experience.</li> <li>Proven experience working with foreign labor workforce.</li> <li>Possess 5 or more years of diverse management experience including experience in vehicle maintenance, facilities maintenance or logistics management.</li> <li>Possess excellent communication, analytical, project management and supervisory skills.</li> <li>Desktop computer skills are essential with proficiency in full range of Microsoft Office products and should be capable of preparing management level reports and presentations.</li> <li>Position may require occasional travel.</li> <li>Possess a valid state issued driver’s license.</li> <h4>Work environment, physical demands, and mental demands:</h4> <p>Typical office environment with no unusual hazards, occasional lifting to 20 pounds, constant sitting while using the computer terminal, constant use of sight abilities while reviewing documents, constant use of speech/hearing abilities for communication and constant mental alertness. Must possess planning/organizing skills and must be able to work under deadlines. Position requires routine travel to site operating locations.</p> <h4>Other responsibilities:</h4> <li><strong>Safety</strong> - The company enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid/buddy aid responsibilities, participating in emergency response tasks and serving on safety committees and teams.</li> <li><strong>Quality</strong> - Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the company quality policy and carry out job activities in compliance with applicable quality system documents and customer contracts. Each employee must read and understand his/her quality management and customer satisfaction responsibilities.</li> <li><strong>Procedure compliance</strong> - Each employee must read, understand and implement the general and specific operational, safety, quality and environmental requirements of all plans, procedures and policies pertaining to his/her job.</li></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Our client, a renowned company in the fintech industry, is looking for an experienced Senior Salesforce Development &amp; Architecture Lead to join their team remotely. The Senior Salesforce Development &amp; Architecture Lead will define the Salesforce platform's technical strategy, architecture, and development direction, ensuring secure, scalable, and high-performing solutions that support critical business operations. This role combines hands-on technical leadership with architectural oversight, mentoring development teams, and collaborating closely with business and technology stakeholders.</p><p><b>Responsibilities</b>:</p><ul><li>Lead the architecture, development, and deployment of enterprise-scale Salesforce solutions using Apex, Lightning Web Components (LWC), Visualforce, and Salesforce Platform capabilities.</li><li>Define and drive Salesforce architecture standards, development best practices, governance, and coding guidelines.</li><li>Lead the implementation and customization of Salesforce across Sales Cloud, Service Cloud, and Experience Cloud.</li><li>Partner with business stakeholders, product owners, and technical teams to translate business requirements into scalable, secure, and maintainable solutions.</li><li>Design and oversee integrations with payment platforms, core banking systems, enterprise applications, and microservices using REST/SOAP APIs and enterprise integration patterns.</li><li>Ensure platform scalability, reliability, security, and performance in a high-volume fintech environment.</li><li>Provide technical leadership through solution design, code reviews, mentoring, and technical guidance.</li><li>Establish and enforce Salesforce security architecture, data access models, and compliance with industry best practices.</li><li>Lead troubleshooting of complex technical issues, performance bottlenecks, and production incidents.</li><li>Drive Git-based version control, CI/CD pipelines, automated testing, and release management.</li><li>Collaborate with enterprise architects and cross-functional teams to align Salesforce solutions with the organization's technology strategy.</li><li>Evaluate new Salesforce capabilities and emerging technologies to continuously improve the platform.</li><li>Maintain technical documentation, architecture diagrams, and integration documentation.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor's degree in Computer Science, Engineering, Information Technology, or a related field.</li><li>8 10+ years of Salesforce development experience, including solution architecture and technical leadership.</li><li>Strong expertise in Apex, SOQL, SOSL, Lightning Web Components (LWC), Visualforce, Salesforce APIs, and platform customization.</li><li>Extensive experience with Sales Cloud, Service Cloud, and Experience Cloud.</li><li>Deep understanding of Salesforce architecture, data modeling, security, governor limits, and performance optimization.</li><li>Proven experience designing and implementing complex integrations using REST/SOAP APIs, asynchronous processing, middleware, and enterprise integration patterns.</li><li>Experience integrating Salesforce with enterprise applications (e.g., payment platforms, banking systems, or ERP solutions) is highly preferred.</li><li>Hands-on experience with Git, CI/CD pipelines, and DevOps practices.</li><li>Demonstrated experience leading development teams, mentoring engineers, and driving architectural decisions.</li><li>Salesforce certifications such as Platform Developer II, Application Architect, System Architect, or Certified Technical Architect (CTA) are highly preferred.</li><li>Excellent problem-solving, communication, and stakeholder management skills.</li><li>English required; Arabic is a plus.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>This position is located in Erbil. Purpose and Scope: The Site Manager has overall responsibility for cost, schedule and technical performance of the operation. Accountable for production, supply, production control/planning and quality management aspects of operation. Acts as primary point of contact for customers at the work site level. Essential Responsibilities: Provides direction and leadership to all site assigned personnel. Prepares and submits site labor/non-labor budgets, forecast estimated costs and control subcontractors Controls service contracts in support of site operations Manages all department managers/staff assigned to site operations Manages and coordinates research and investigations into business problems. Provides guidance and assistance relative to operating problems and projects. Perform all other position related duties as assigned or requested. Work Environment, Physical Demands, and Mental Demands: Typical office environment with no unusual hazards, occasional lifting to 20 pounds, constant sitting while using the computer terminal, constant use of sight abilities while reviewing documents, constant use of speech/hearing abilities for communication and constant mental alertness. Must possess planning/organizing skills and must be able to work under deadlines. Position requires routine travel to site operating locations. Other Responsibilities: Safety - Amentum enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid/buddy aid responsibilities, participating in emergency response tasks and serving on safety committees and teams. Quality - Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the Amentum Quality Policy and carry out job activities in compliance with applicable Amentum Quality System documents and customer contracts. Each employee must read and understand his/her Quality Management and Customer Satisfaction responsibilities. Procedure Compliance - Each employee must read, understand and implement the general and specific operational, safety, quality and environmental requirements of all plans, procedures and policies pertaining to his/her job.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelor's degree or equivalent combination of academic/technical/military training and experience</p><p>Proven experience working with foreign labor workforce.</p><p>Possess 5 or more years of diverse management experience including experience in vehicle maintenance, facilities maintenance or logistics management.</p><p>Possess excellent communication, analytical, project management and supervisory skills.</p><p>Desktop computer skills are essential with proficiency in full range of Microsoft Office products and should be capable of preparing management level reports and presentations.</p><p>Position may require occasional travel.</p><p>Possess a valid state issued driver s license.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>This position is located in Erbil.</p> <p> </p> <p> <b>Purpose and Scope:</b> </p> <p> </p> <p>The Site Manager has overall responsibility for cost, schedule and technical performance of the operation. Accountable for production, supply, production control/planning and quality management aspects of operation. Acts as primary point of contact for customers at the work site level. </p> <p> </p> <p> <b>Essential Responsibilities:</b> </p> <ul> <li>Provides direction and leadership to all site assigned personnel.</li> <li>Prepares and submits site labor/non-labor budgets, forecast estimated costs and control subcontractors</li> <li>Controls service contracts in support of site operations</li> <li>Manages all department managers/staff assigned to site operations</li> <li>Manages and coordinates research and investigations into business problems.</li> <li>Provides guidance and assistance relative to operating problems and projects.</li> <li>Perform all other position related duties as assigned or requested.</li> </ul> <p> </p> <p> <b>Minimum Position Knowledge, Skills, and Abilities Required:</b> </p> <ul> <li>Bachelor's degree or equivalent combination of academic/technical/military training and experience</li> <li>Proven experience working with foreign labor workforce.</li> <li>Possess 5 or more years of diverse management experience including experience in vehicle maintenance, facilities maintenance or logistics management. </li> <li>Possess excellent communication, analytical, project management and supervisory skills. Desktop computer skills are essential with proficiency in full range of Microsoft Office products and should be capable of preparing management level reports and presentations.</li> <li>Position may require occasional travel.</li> <li>Possess a valid state issued driver s license. </li> </ul> <p> </p> <p> <b>Work Environment, Physical Demands, and Mental Demands:</b> </p> <p>Typical office environment with no unusual hazards, occasional lifting to 20 pounds, constant sitting while using the computer terminal, constant use of sight abilities while reviewing documents, constant use of speech/hearing abilities for communication and constant mental alertness. Must possess planning/organizing skills and must be able to work under deadlines. Position requires routine travel to site operating locations. </p> <p> </p> <p> <b>Other Responsibilities:</b> </p> <p>Safety - Amentum enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid/buddy aid responsibilities, participating in emergency response tasks and serving on safety committees and teams.</p> <p> </p> <p>Quality - Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the Amentum Quality Policy and carry out job activities in compliance with applicable Amentum Quality System documents and customer contracts. Each employee must read and understand his/her Quality Management and Customer Satisfaction responsibilities.</p> <p> </p> <p>Procedure Compliance - Each employee must read, understand and implement the general and specific operational, safety, quality and environmental requirements of all plans, procedures and policies pertaining to his/her job.</p></div></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are looking for the right people - people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world's largest providers of products and services to the global energy industry. Job Duties The Asset Manager is accountable for the overall management, performance, and value delivery of an oil and gas asset operated under an integrated asset management (IAM) production enhancement contract. Acting as the single point of accountability to the client, the Asset Manager leads a multi-discipline service and technical team to optimize production, manage field development, and ensure safe, efficient, and sustainable operations in alignment with the client's strategic and commercial objectives. Under broad direction: Provide overall leadership in the execution of the asset's integrated management plan to achieve agreed production, cost, and HSE performance targets. Leads and directs multi-discipline asset teams comprised of production operations, maintenance, facilities engineering, subsurface, drilling, HSE, and supply chain. Drive daily and long-term production optimization through coordination of field &amp; well operations, subsurface, drilling, projects, and maintenance teams. Identify and manage operational and contractual risks to safeguard asset value and business performance. Leads and directs multi-discipline asset teams in planning and execution of large scale field development/re-development programs and production operations in partnership with our clients under especially challenging conditions (such as foreign assignment) to maximize the value of oil and gas assets and projects. Responsible for financial performance (P/L) of assigned assets through effective planning, organizing, management of resources, and application of value- adding technologies. Serves as the primary interface with partners for project operations and represents the Company in technical and commercial matters. Ensures the technical quality of work prepared under their supervision and administers contract provisions related to execution of work. ob role contributes directly to value creation through cost control, technical innovation, increased production and improved recovery of hydrocarbon reserves. Job role has budgetary accountabilities or directly impacts a revenue center's viability or its quality of service via personal contributions.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Requirements &amp; Summary</p><ul><li>Skills : Asset Management</li><li>Education : High School/Secondary</li><li>Employment Type : Full Time Salaried Employee</li><li>Location : Basra, BA, Iraq</li></ul><p>Halliburton is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation .</p><p>Location Oils Opertion ST,N 29 Burjesia, Basra, Basrah, 61001, Iraq</p><p>Job Details</p><ul><li>Requisition Number: PHONE_NUMBER</li><li>Experience Level: Experienced Hire</li><li>Job Family: Engineering/Science/Technology</li><li>Product Service Line: Halliburton Project Management</li><li>Full Time / Part Time: Full Time</li><li>Additional Locations for this position:</li></ul><p>Compensation Information Compensation is competitive and commensurate with experience.</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span> <span></span></span><p>We are looking for the right people — people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world’s largest providers of products and services to the global energy industry.</p><br><b>Job Duties</b> <br><p>The Asset Manager is accountable for the overall management, performance, and value delivery of an oil and gas asset operated under an integrated asset management (IAM) production enhancement contract.</p><br> <p>Acting as the single point of accountability to the client, the Asset Manager leads a multi-discipline service and technical team to optimize production, manage field development, and ensure safe, efficient, and sustainable operations in alignment with the client’s strategic and commercial objectives.</p><br> <p>&nbsp;Under broad direction:</p><br> <p>Provide overall leadership in the execution of the asset’s integrated management plan to achieve agreed production, cost, and HSE performance targets.<br>Leads and directs multi-discipline asset teams comprised of production operations, maintenance, facilities engineering, subsurface, drilling, HSE, and supply chain.<br>Drive daily and long-term production optimization through coordination of field &amp; well operations, subsurface, drilling, projects, and maintenance teams. Identify and manage operational and contractual risks to safeguard asset value and business performance.<br>Leads and directs multi-discipline asset teams in planning and execution of large scale field development/re-development programs and production operations in partnership with our clients under especially challenging conditions (such as foreign assignment) to maximize the value of oil and gas assets and projects.&nbsp;<br>Responsible for financial performance (P/L) of assigned assets through effective planning, organizing, management of resources, and application of value- adding technologies.&nbsp;<br>Serves as the primary interface with partners for project operations and represents the Company in technical and commercial matters.&nbsp;<br>Ensures the technical quality of work prepared under their supervision and administers contract provisions related to execution of work.&nbsp;<br>ob role contributes directly to value creation through cost control, technical innovation, increased production and improved recovery of hydrocarbon reserves.&nbsp;<br>Job role has budgetary accountabilities or directly impacts a revenue center's viability or its quality of service via personal contributions.</p><br><br><br><b>Qualifications</b> <br><br><br><p><strong>Halliburton is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation</strong>.</p><br> <p><strong><u>Location</u></strong></p><br> <p>Oils Opertion ST,N°29 Burjesia,&nbsp;Basra,&nbsp;Basrah,&nbsp;61001, Iraq</p><br> <p><strong><u>Job Details</u></strong></p><br> <p><strong>Requisition Number:</strong>&nbsp;210437&nbsp;&nbsp;<br><strong>Experience Level:&nbsp;</strong>Experienced Hire&nbsp;<br><strong>Job Family:</strong>&nbsp;Engineering/Science/Technology&nbsp;<br><strong>Product Service Line:&nbsp;</strong>Halliburton Project Management&nbsp;&nbsp;&nbsp;<br><strong>Full Time / Part Time:&nbsp;</strong>Full Time</p><br> <p><strong>Additional Locations for this position:&nbsp;</strong></p><br> <p><u><strong>Compensation Information</strong></u><br>Compensation is competitive and commensurate with experience.</p><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><u><b>Job Summary</b></u> <br></span><p>The Senior Quantity Surveyor prepares all costs aspects of civil and building works on projects, from the inception to final account. To ensure all expenditure is kept to a minimum and all revenue is maximized as early as possible all without compromising Employer/Subcontractor relationship.</p><br> <br><br><u><b>Job Responsibilities 1</b></u> <br><p>Obtain and expand knowledge base on all Civil and Building related matters as relate to specific projects.</p><br> <p>Administer subcontractors and use of Company procedures.</p><br> <p>Follow up with site construction team and technical team for collecting the progress details.</p><br> <p>Obtain and expand knowledge base on all QS related matters related to specific projects. Through the</p><br> <p>achievement of this all commercial and contractual matter.</p><br> <p>Ensure to manage Client Site Instructions and Variation Orders.</p><br> <p>Ensure that payment application is submitted to the Employer, no later than the due date.</p><br> <p>Ensure that Cash Flow and Budget Preparation including regular monitoring at least once per month.</p><br> <br><br><u><b>Job Responsibilities 2</b></u> <br><p>Ensure Contractual and Commercial Support and Correspondence “Letter Writing”.</p><br> <p>Ensure the preparation of backup documentation and justification required for Client Instructions and / or interim Valuations.</p><br> <p>Ensure to complete and submit monthly cost value reconciliations, cost to complete reports and profitability projections within 1 week of the Valuation submission.</p><br> <p>Ensure to place Subcontracts on Standard approved terms and Templates, and at a lesser amount as reflected in the allowable.</p><br> <p>Ensure that all interim applications are received on time from the Subcontractors and included into KCT applications and submitted on time to the Employer.</p><br> <p>Ensure that payment certificates for Subcontractors are valued no more than the value applied for “or” certified from the Client, and processed on time.</p><br> <p>Ensure that all Packages preparation and Tendering Procedures are conformed with, and correctly coordinated.</p><br> <p>Ensure all changes to the scope of the works are accompanied by signed off Variation Orders and payment /</p><br> <p>deduction is secured from the Client / Project Manager and Back to Back with the Main Contract.</p><br> <br><br><b>Additional Responsibilities 3</b> <br><br><u><b>Job Knowledge &amp; Skills</b></u> <br><p>Experience in the use of computer based quantification and knowledge in using systems such as CCS</p><br> <p>(Candy).</p><br> <p>Knowledge in using Microsoft office applications (Word, Excel, Power point, outlook express</p><br> <p>etc.).Experience in the optimal use of AutoCAD for Quantity Takeoff.</p><br> <p>Knowledge in preparation of Bill of Quantities with standard method of measurement.</p><br> <p>Knowledge in Principles of Measurement (International) 1979, NRM2 CESSMMIII, QSSM, QCS, FIDIC</p><br> <p>Knowledge in using Microsoft office Applications i.e. Excel, PowerPoint etc.</p><br> <p>ERP knowledge preferably SAP functional skills are a requirement to be successful in this role.</p><br><br><br><u><b>Job Experience</b></u> <br><p>Minimum 8 year(s) working experience, 5 year(s) relevant working experience, 2 year (s) GCC is a plus</p><br><br><br><u><b>Competencies</b></u> <br>Resilience<br>AI Fluency<br>Quality<br>Leadership<br>Contract Administration L3<br>Payments - Subcontracts and Main Contracts L3<br>Subcontract Agreement L3<br>Variations and claims L3<br>Agility<br>Subcontracting L3<br><br><br><u><b>Education</b></u> <br>Bachelor's Degree in Civil Engineering or Engineering<br>Professional Qualification in Quantity Surveying or any related field<br><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview ***This position will be physically located in Iraq in support of LOGCAP.*** Under the supervision of the PMO Quality Senior Manager, the Quality Manager is responsible to provide a Total Quality Management System that anticipates &amp; resolves potential quality problems &amp; provides continuous oversight necessary to perform throughout the LOGCAP AOR. Oversee all quality-related functions, including Program-level Quality Surveillance/Audit, Customer Feedback Program, process Improvements, Document Control. This position also coordinates activities with various intermediate managers throughout the program. Responsibilities This position description is subject to change at any time as needed to meet the requirements of the program or company. + Provides expert knowledge and experience in running a comprehensive Quality Management system for the program. + Possess the technical ability to develop executive Corrective Action Plan in response to third party nonconformance reports (NCR). + Coordinates the correction of minor problems with the functional area managers and acts as liaison with the Government Contract Officer Representatives (CORs) and Quality Assurance Representatives (QARs). + Evaluate how overall work center performance is meeting Performance Work Statement (PWS) requirements. + Implements ISO 9001:2015 Standards. + Ensures processes and procedures required are executed in compliance with project specifications, standards and safety and security requirements. + Review Work-center Plans, Standard Operating Procedures (SOP), Internal Operating Procedures (IOP) and Work Instructions (WI), to ensure they provide proper operational information and direction for performing all tasks. + Ensures QA Audit plans, and corrective actions are identified where any non-conformities or process deviations are identified and follow up these to conclusion. Direct corrective actions for all discrepancies and monitor compliance. + Evaluate and resolve customer complaints and take actions to preclude reoccurrence. + Schedule VOC to insure contract performance meets or exceeds requirements. + Coordinate with the technical sections to assist in developing KPIs to measure the PWS of the various sections. + Perform other duties as assigned. Qualifications + Minimum Qualifications: Education/Certifications: One year related experience may be substituted for one year of education, if degree is required. + Bachelor’s degree in Business Administration, Computer Science, Engineering, or closely related field is required. + Ability to possess an ISO 9001:2015 Lead Auditor. + Knowledge of DMAAIC principles is preferred. + Six Sigma Black Belt certification (Strongly Desired) + Must have ability to acquire and maintain a Secret Clearance. + PMP Certification (Strongly Desired) + Experience: + A minimum of ten (10) years in a DOD environment, (7) years of Quality experience required with at least five (5) years of leadership/management experience. + Has Proven Leadership of Quality or Project Management of multiple projects or remote sites + Successful candidate must also show evidence of knowledge of running a Quality Management System (QMS), experience in DMAIC or LEAN principles with continuous improvement projects. + Candidate must also be able to work under pressure in a high tempo environment and manage multiple assignments simultaneously. + Skills: + Must have and extensive knowledge of FAR, ISO 9001:2015 &amp; DoD regulations + Must have higher or Senior level organizational skills. + Computer proficiency in Microsoft Office Excel, PowerPoint, Outlook, Word, SharePoint, Project and Visio. + Ability to work with very diverse workforce. + Excellent English communicator both in writing and verbally. + Expertise in how SOP'S, Plans, Work Instructions, processes are executed is a must. + Proven skills in Analytical/Problem Solving. + Strong planning and organizational skills. + Interpersonal skills to represent the PMO during audits and inspections, to participate in various meetings and to present data/metrics to program leadership and technicians as required. + Strong attention to detail is required. + Knowledge of PMI Methodologies and principles preferred. + Supervisory Responsibilities: + Provides leadership, mentoring and supervision of Quality System Supervisors/Leads/Auditor. + Working Conditions: + Must be capable of working in an extreme weather conditions with temperatures exceeding 120 degrees Fahrenheit. + Indoor and/or outdoor environment with very adverse and harsh conditions (i.e., hot, dry, dusty, desert environment with average temperatures of 30 degrees in the winter and 130 degrees in the summer months). + Includes some industrial production environment conditions as well. + Physical Requirements: + Light work. Exerting up to 20 pounds of force occasionally, and/or up to 10 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects. + Work may require heavy lifting, stooping, climbing, prolonged standing, prolonged sitting, and working with or in areas where a potential could exist for exposure to physical, chemical, or biological agents. + Employee use of personal protective equipment (PPE) is required for some situations. PPE includes, but is not limited to, head, foot, torso, respiratory, vision, and hearing protective devices. + Must comply with all Fire and Safety Regulations and post policies. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>E-PTW Administrator<br><br><p><b>Position title</b>: E-PTW Administrator</p><br><br><p><b>Position status </b>: Local</p><br><br><p><b>Direct Position reports to</b>: HSE (ePTW) Lead</p><br><br><p><b>Department</b>: HSSE</p><br><br><p><b>Rotation pattern</b>: 28/28</p><br><br><br><p><b>About Company</b></p><br><br><p><i><u>"Belong, Connect, Grow, with KBR!</u></i></p><br><br><br><p><i>The KBR team delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</i></p><br><br><br><p><i>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets."</i></p><br><br><br><p><b>Job purpose</b></p><br><br><br><p>Electronic PTW (ePTW) Administrator will be responsible for ensuring the smooth implementation of the ePTW system in areas where it has already been rolled out, as well as supporting its rollout in new areas and departments.</p><br><br><p>The Electronic Permit to Work (ePTW) Administrator is responsible for managing, maintaining, and supporting the electronic Permit to Work system to ensure safe, compliant, and efficient control of work activities. The role includes system administration, user support, permit workflow monitoring, training coordination, reporting, and ensuring consistent adherence to these procedures throughout the organization.</p><br><br><br><p><b>Duties and responsibilities</b></p><br><br><br><ul><li>Administer and maintain the ePTW system and associated databases.</li><li>Create, modify, deactivate, and manage user accounts, roles, and permissions.</li><li>Configure workflows, templates, and system settings in line with company procedures.</li><li>Monitor system performance and coordinate with IT/software vendors for troubleshooting and upgrades.</li><li>Ensure data integrity, system availability, and backup compliance.</li><li>Supporting E-PTW development and rollout in Majnoon Oilfield and ensuring smooth transition from a paper-based to an electronic PTW system.</li><li>Support permit issuers, receivers, and approvers in the proper use of the ePTW system.</li><li>Monitor live permits and ensure permits are processed according to approved workflows.</li><li>Assist in resolving permit conflicts, workflow issues, and system-related delays.</li><li>Coordinate contingency plans during system outages, including implementation of paper-based permits when required.</li><li>Ensure the ePTW process complies with company HSE standards and regulatory requirements.</li><li>Support implementation of isolation management and simultaneous operations (SIMOPS) controls.</li><li>Maintain records and audit trails for permits, approvals, and system activities.</li><li>Participate in HSE audits, inspections, and incident investigations related to permit control.</li><li>Conduct user training and awareness sessions for employees and contractors.</li><li>Provide coaching and technical support to system users.</li><li>Develop user guides, procedures, and training materials.</li><li>Support competency assessments related to ePTW usage.</li><li>Generate daily, weekly, and monthly permit reports and KPIs.</li><li>Maintain documentation related to system configuration, procedures, and change management.</li><li>Track system issues, corrective actions, and improvement initiatives.</li><li>Prepare management reports regarding permit statistics and system performance</li><li>Identify opportunities to improve the ePTW process and workflow efficiency.</li></ul><br><p><b>Qualification </b></p><br><br><br><ul><li>Suitable tertiary qualification, preferably technical.</li></ul><br><p><b>Experience </b></p><br><br><br><ul><li>Experience in Permit to Work systems, HSE operations, or industrial site administration.</li><li>Familiarity with electronic Permit to Work software and workflow systems.</li><li>Good understanding of isolation management, risk assessment, and work authorization processes.</li></ul><p><b>Language proficiency, computer and software skills</b></p><br><br><br><ul><li>English</li><li>Highly skilled in Using Microsoft applications including (Word, Excel, Power Point, Outlook).</li><li>Skill in software and database tools related to E-PTW systems.</li></ul><br><p><b>Key Competencies</b></p><br><br><ul><li>Ability to work in harsh environment</li><li>Culturally and ethically aware</li><li>Problem solving</li><li>Team coordination</li><li>Communication skills</li><li>Safety leadership</li><li>Communication skills</li><li>Analytical thinking</li></ul><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Wood is recruiting for an Electrical Supervisor to join its Iraq business unit focusing on receiving and verifying all electrical equipment, ensuring conformity to project specifications and standards.</p><br><p>This role is a full-time on-site role in Basra, Iraq with travel requirement.</p><br><br> Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy &amp; Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com<br> <b>Diversity Statement&nbsp;</b><br> We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.<br><br>Responsibilities:<br><p>Wood is recruiting for an Electrical Supervisor to join its Iraq business unit focusing on receiving and verifying all electrical equipment, ensuring conformity to project specifications and standards.</p><br><p>This role is a full-time on-site role in Basra, Iraq with travel requirement.</p><br><p><i><strong>#Wood #Iraq #Basra #Electrical Supervisor</strong></i></p><br><p><strong><u>The role</u></strong></p><br><p>This is an exciting opportunity for an experienced&nbsp;Electrical Supervisor&nbsp;to join our Iraq Business Unit.</p><br><p><strong>Our Clients and Projects&nbsp;</strong></p><br><p><strong>Designing the future. Transforming the world.&nbsp;</strong></p><br><p>This Project aims to take over the existing asset and maximize the production in 2 phases. This is a fast-track project and schedule-oriented Design to enhance the production.&nbsp;</p><br><p>The Phase 1 will restore, upgrade, and develop the current plant (CPF1) including: Restoration of initial CPF1 capacity; building a new export pipeline (24”, ~30km); restoration of CPF1 integrity and operability; flaring elimination and released water; development of new flowlines, pads, and electrification network for approximately 30 new wells; debottlenecking of the plant; upgrade of the Safety and Security facilities.&nbsp;</p><br><p>Our scope is to provide Engineering, Procurement services and Construction assistance (EPsCa) for the initial development phase of the field in Southern Iraq. The scope of services includes FEED, detailed design, procurement support, and construction and commissioning assistance.</p><br><p><strong><u>What we can offer</u></strong></p><br><ul> <li><strong>Meaningful and interesting projects</strong> Delivered to high profile clients and complex projects in Iraq&nbsp;</li> <li><strong>Commitment to Diversity and Inclusion</strong>; we are an organisation actively committed to diversity and inclusion across our business with employee networks committed to giving all employees a voice&nbsp;</li> <li><strong>Competitive salary</strong> with regular salary reviews to ensure we are rewarding at the right level in line with the market&nbsp;</li> <li><strong>Medical Insurance:&nbsp;</strong>Ensures inpatient and outpatient medical care is available should you require treatment.&nbsp;</li> <li><strong>Commitment to continued professional development;</strong> development plans that are tailored to your individual needs and interests&nbsp;</li> <li><strong>Global connections</strong>: join experts around the world who are at the leading edge of our industry, shaping the standards of our profession&nbsp;</li> <li><strong>Long Service Award:&nbsp;</strong>Wood values the commitment and loyalty of our people. Celebrating Long Service provides an opportunity for the business to demonstrate their appreciation of the hard work, dedication and many years’ services of our employees at 5-year service milestones&nbsp;</li></ul><p><strong><u>Job Objectives:</u></strong></p><br><p><span>The electrical supervisor is responsible of all activities related to his area of expertise in respect of the following:&nbsp;</span></p><br><ol> <li><span>safety</span></li> <li><span>cost efficient</span></li> <li><span>high quality according to specifications</span></li> <li><span>in time</span></li> <li><span>in line with legal aspects and</span></li> <li><span>with minimum disturbance Ratawi CPF1 operations.&nbsp;</span></li></ol><p><span>Will guarantee transparency in relations with Contractors/ Subcontractors.</span></p><br><p><span><strong>HSE activities:</strong></span></p><br><ul> <li><span>Support and enforce TTEEPRH guidelines and HSE objectives.</span></li> <li><span>Participate/Lead Job Safety Analysis, stop dangerous situations, and report anomalies and dangerous acts.</span></li> <li><span>Evaluate and manage the Co-Activities with Construction SPVs</span></li> <li><span>Ensure operations complies with local regulation and TEEP GGIP policies.</span></li> <li><span>Attend HSE meetings and training when necessary.</span></li> <li><span>Enforce Health, Safety, and Environment (HSE) policies and procedures, ensuring a safe working environment for all personnel.</span></li></ul><p><span><strong>Activities, for his area of expertise:</strong></span></p><br><ul> <li><span>Receive and verify all&nbsp;</span><span>electrical</span><span> equipment, ensuring conformity to project specifications and standards.</span></li> <li><span>Coordinate and schedule equipment deliveries to the site, planning and managing logistics for all electrical equipment.</span></li> <li><span>Develop and implement preservation plans for electrical equipment on-site, ensuring proper maintenance until installation.</span></li> <li><span>Supervise the installation of all&nbsp;</span><span>electrical</span><span> equipment.</span></li> <li><span>Coordinate with other disciplines to ensure site readiness, including foundation preparation and electrical interfaces.</span></li> <li><span>Be proactive in addressing potential issues and ensuring smooth installation processes.</span></li> <li><span>Implement and oversee QA/QC procedures during equipment installation, conducting inspections to ensure compliance with quality standards.</span></li> <li><span>Manage and coordinate&nbsp;</span><span>electrical</span><span> construction activities, resolving any on-site technical issues.</span></li> <li><span>Assist in pre-commissioning and commissioning of&nbsp;</span><span>electrical</span><span> systems, ensuring all systems meet performance criteria.</span></li> <li><span>Prepare and manage the hand-over of&nbsp;</span><span>electrical</span><span> systems, ensuring all documentation is complete and accurate.</span></li> <li><span>Interface between interdisciplinary departments and within international teams, ensuring seamless integration of&nbsp;</span><span>electrical</span><span> systems</span></li> <li><span>Maintain and update technical documentation, including technical reports and specifications.</span></li> <li><span>Troubleshoot and resolve&nbsp;</span><span>electrical</span><span> issues, providing technical support as needed.</span></li> <li><span>Monitor a team of contractor’s&nbsp;</span><span>electrical</span><span> technicians, providing guidance and training as necessary.</span></li> <li><span>Monitor and control project costs related to&nbsp;</span><span>electrical</span><span> work, identifying, and implementing cost-saving measures.</span></li> <li><span>Develop and manage&nbsp;</span><span>electrical</span><span> work schedules, ensuring timely completion of all&nbsp;</span><span>electrical</span><span> activities.</span></li> <li><span>Assist in the procurement of&nbsp;</span><span>electrical</span><span> equipment and materials, reviewing vendor documentation for compliance.</span></li> <li><span>Identify and mitigate risks related to&nbsp;</span><span>electrical</span><span> activities, implementing contingency plans as necessary.</span></li> <li><span>Manage changes to&nbsp;</span><span>electrical</span><span> systems and documentation, evaluating and approving change requests.&nbsp;</span></li> <li><span>Identify opportunities for process improvement, implementing best practices for&nbsp;electrical system performance.</span></li></ul><br>Qualifications:<br><p><strong>What makes you remarkable?&nbsp;</strong></p><br><p>At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world’s most critical challenges.&nbsp;&nbsp;</p><br><p><strong>Expected:</strong></p><br><ul> <li><span>Bachelor’s degree in electrical engineering</span></li> <li><span>5 to 10 years of experience in the oil industry, with significant experience with SIMOPS works</span></li> <li><span>Strong understanding of Oil &amp; Gas International Codes and Standards, Proactive and team-oriented approach with the ability to work collaboratively across complex project teams.&nbsp;</span></li> <li><span>Strong technical and problem-solving skills,&nbsp;</span></li> <li><span>Excellent communication and interpersonal skills,&nbsp;</span></li> <li><span>Ability to work effectively under pressure,&nbsp;</span></li> <li><span>Detail-oriented with strong organizational skills.</span></li></ul> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Site M&amp;P Construction Lead (Infrastructure)<br><br><p><b>Job Description</b>: Construction M&amp;P Lead</p><br><br><p><b>Company</b>: KBR Iraq</p><br><br><p><b>Location</b>: Iraq (28/28 Rotation)</p><br><br><p><b>Nationality:</b> Any</p><br><br><br><p>The Lead Mechanical &amp; Piping Construction Lead is responsible for directing, coordinating, and technically governing all field construction activities across mechanical and piping scopes within brownfield and greenfield project environments. The role provides senior level leadership, ensures disciplined execution, drives constructability integration, and supports strategic planning across multi‑phase construction programs.</p><br><br><br><p>This position acts as the primary technical Lead for mechanical and piping construction, ensuring HSSE compliance, schedule adherence, cost efficiency, and quality compliance. The Lead manages multi‑discipline interfaces and ensures seamless integration between engineering, procurement, construction, and commissioning teams.</p><br><br><br><p><b>Accountabilities / Expectations</b></p><br><br><ul><li>Lead all mechanical and piping construction activities across multiple simultaneous work fronts, ensuring safe, efficient, and compliant execution.</li><li>Provide technical direction, coaching, and performance oversight to construction teams and contractors.</li><li>Manage daily/weekly construction planning, work‑front readiness, and resource allocation.</li><li>Ensure coordinated execution across civil, structural, electrical, instrumentation, and commissioning disciplines.</li><li>Ensure mechanical and piping designs fully incorporate constructability principles, modularization, cold‑work strategies, and HSSE risk reduction.</li><li>Lead Constructability Reviews and provide authoritative input on installation methodologies, lifting studies, access planning, and brownfield tie‑in strategies.</li><li>Validate engineering deliverables for completeness, accuracy, and alignment with construction sequencing and systemization.</li><li>Review and approve construction method statements, ITPs, JHAs, and technical procedures.</li><li>Support development and implementation of construction execution plans, resource strategies, and work‑front sequencing for all project phases.</li><li>Ensure construction activities align with Level 4 schedules, procurement milestones, fabrication readiness, and commissioning priorities.</li><li>Identify productivity constraints, evaluate root causes, and implement corrective actions to improve field performance.</li><li>Drive initiatives such as off‑plot fabrication, pre‑assembly, modular construction, and standardized installation practices.</li><li>HSSE leadership by enforcing safe systems of work and ensuring compliance with KBR and client HSSE standards.</li><li>Ensure mechanical and piping installations meet project specifications, industry codes (ASME, API, ISO), and quality requirements.</li><li>Oversee inspection, testing, and commissioning readiness including hydrotesting, flushing, leak testing, and mechanical completion.</li><li>Maintain strong communication with Construction Manager, Engineering Lead, Procurement, QA/QC, and Commissioning teams.</li><li>Ensure timely resolution of technical queries, field design changes, and construction issues through structured interface management.</li><li>Provide accurate reporting on progress, productivity, risks, and construction performance.</li><li>Identify construction risks early, develop mitigation plans, and ensure proactive management of brownfield and greenfield constraints and SIMOPS.</li><li>Promote continuous improvement through lessons learned, innovation in field execution, and adoption of best‑practice methodologies.</li></ul><br><p><b>Education</b></p><br><br><p>BSc. Degree in Mechanical Engineering, Piping Engineering, or related discipline.</p><br><br><br><p><b>Experience Requirements</b></p><br><br><p>10 + years experience in Oil &amp; Gas mechanical/piping engineering and design.</p><br><br><p>5- 10 years experience leading construction activities in multidiscipline environments, including brownfield and live‑plant conditions.</p><br><br><br><p>Demonstrated experience in:</p><br><br><ul><li>Productivity measurement and resource‑based planning</li><li>Level 4 construction scheduling</li><li>Mechanical completion, systemization, and commissioning interfaces</li><li>Managing multiple contractors and simultaneous work fronts</li><li>Technical &amp; Leadership Skills</li><li>Strong leadership and communication capabilities.</li><li>Advanced understanding of constructability, modularization, and field execution methodologies.</li><li>Proficiency in interpreting engineering drawings, isometrics, P&amp;IDs, and 3D model reviews.</li><li>Ability to lead complex brownfield and greenfield tie‑ins, shutdown scopes, and SIMOPS environments.</li><li>Strong problem solving skills with the ability to make technical decisions under pressure.</li><li>High competency in HSSE risk management and safe construction practices.</li></ul><br><br><br><br> </div>

<p><h4>About company</h4> <p>Belong, connect, grow, with KBR! The KBR team delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals. KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Job purpose</h4> <p>Electronic PTW (ePTW) Administrator will be responsible for ensuring the smooth implementation of the ePTW system in areas where it has already been rolled out, as well as supporting its rollout in new areas and departments. The Electronic Permit to Work (ePTW) Administrator is responsible for managing, maintaining, and supporting the electronic Permit to Work system to ensure safe, compliant, and efficient control of work activities. The role includes system administration, user support, permit workflow monitoring, training coordination, reporting, and ensuring consistent adherence to these procedures throughout the organization.</p> <h4>Duties and responsibilities</h4> <ul> <li>Administer and maintain the ePTW system and associated databases.</li> <li>Create, modify, deactivate, and manage user accounts, roles, and permissions.</li> <li>Configure workflows, templates, and system settings in line with company procedures.</li> <li>Monitor system performance and coordinate with IT/software vendors for troubleshooting and upgrades.</li> <li>Ensure data integrity, system availability, and backup compliance.</li> <li>Support ePTW development and rollout in Majnoon Oilfield and ensure smooth transition from a paper-based to an electronic PTW system.</li> <li>Support permit issuers, receivers, and approvers in the proper use of the ePTW system.</li> <li>Monitor live permits and ensure permits are processed according to approved workflows.</li> <li>Assist in resolving permit conflicts, workflow issues, and system-related delays.</li> <li>Coordinate contingency plans during system outages, including implementation of paper-based permits when required.</li> <li>Ensure the ePTW process complies with company HSE standards and regulatory requirements.</li> <li>Support implementation of isolation management and simultaneous operations (SIMOPS) controls.</li> <li>Maintain records and audit trails for permits, approvals, and system activities.</li> <li>Participate in HSE audits, inspections, and incident investigations related to permit control.</li> <li>Conduct user training and awareness sessions for employees and contractors.</li> <li>Provide coaching and technical support to system users.</li> <li>Develop user guides, procedures, and training materials.</li> <li>Support competency assessments related to ePTW usage.</li> <li>Generate daily, weekly, and monthly permit reports and KPIs.</li> <li>Maintain documentation related to system configuration, procedures, and change management.</li> <li>Track system issues, corrective actions, and improvement initiatives.</li> <li>Prepare management reports regarding permit statistics and system performance.</li> <li>Identify opportunities to improve the ePTW process and workflow efficiency.</li> </ul> <h4>Qualification</h4> <p>Suitable tertiary qualification, preferably technical.</p> <h4>Experience</h4> <ul> <li>Experience in Permit to Work systems, HSE operations, or industrial site administration.</li> <li>Familiarity with electronic Permit to Work software and workflow systems.</li> <li>Good understanding of isolation management, risk assessment, and work authorization processes.</li> </ul> <h4>Language proficiency, computer and software skills</h4> <ul> <li>English.</li> <li>Highly skilled in using Microsoft applications including Word, Excel, PowerPoint, and Outlook.</li> <li>Skill in software and database tools related to ePTW systems.</li> </ul> <h4>Key competencies</h4> <ul> <li>Ability to work in harsh environment.</li> <li>Culturally and ethically aware.</li> <li>Problem solving.</li> <li>Team coordination.</li> <li>Communication skills.</li> <li>Safety leadership.</li> <li>Analytical thinking.</li> </ul></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><strong>Launch Your Career as a Field Engineer with Weatherford</strong> &nbsp;</p><br><p>Are you ready to kick-start your engineering career in a hands-on, high-impact role? At Weatherford, our Field Engineers are the essential connection between our&nbsp;cutting-edge&nbsp;technologies and the real-world challenges faced in oil and gas rigs. &nbsp;</p><br><p>This is more than just a job —&nbsp;it’s&nbsp;an adventure.&nbsp;You’ll&nbsp;be working in the field, often at remote rig sites, where&nbsp;you’ll&nbsp;gain unmatched experience and responsibility from day one. Whether&nbsp;it’s&nbsp;assembling equipment, analysing data, or solving problems on the fly,&nbsp;you’ll&nbsp;be at the heart of operations that matter. &nbsp;</p><br><p><strong>Your Development Journey</strong> &nbsp;</p><br><p>You’ll&nbsp;be enrolled in our 4-year Field Engineer Technical Development Program, which blends classroom learning with real-world experience: &nbsp;</p><br><ul> <li>Year 1: Work with guidance and take part in hands-on training at one of our global&nbsp;centers. Travel may be needed to gain real-world experience&nbsp;</li> <li>Year 2: Take on more responsibility at the wellsite while continuing to grow your technical skills through hands-on and classroom training&nbsp;</li> <li>Years 3 &amp; 4: Expanding your knowledge and skills, and may lead teams at the wellsite while serving as the main contact for our clients&nbsp;</li></ul><p><strong>Your day-to-day could include: </strong>&nbsp;</p><br><ul> <li>Prepare, deploy, and&nbsp;operate&nbsp;advanced downhole tools to meet specific wellsite objectives&nbsp;</li> <li>Utilize&nbsp;cutting-edge&nbsp;simulation software to design and&nbsp;optimize&nbsp;wellsite solutions tailored to client needs&nbsp;</li> <li>Analyse performance data and recommend improvements &nbsp;</li> <li>Manage equipment&nbsp;logistics&nbsp;and ensure seamless setup and operation at the rig site&nbsp;</li> <li>Create detailed post-job reports and share actionable insights with clients and internal teams&nbsp;</li> <li>Champion a culture of continuous improvement with a strong focus on safety, quality, and performance&nbsp;</li> <li>Deliver front-line engineering support to our customers throughout operations, resolving issues independently&nbsp;</li></ul><p>&nbsp;<strong>What&nbsp;We’re&nbsp;Looking For</strong> &nbsp;</p><br><ul> <li>Graduated with bachelor’s degree in engineering (all fields) within the last 24 months&nbsp;</li> <li>No more than 1 year of experience&nbsp;</li> <li>English language fluent&nbsp;proficiency&nbsp;(written and spoken)&nbsp;</li> <li>Strong communication&nbsp;and interpersonal skills&nbsp;</li> <li>Ability to analyse complex problems, apply critical thinking, and make informed decisions&nbsp;</li> <li>A passion for hands-on work and learning in dynamic environments (onshore and offshore)&nbsp;</li></ul><p><strong>What to Expect</strong> &nbsp;</p><br><p>This role is physically and mentally demanding.&nbsp;You’ll&nbsp;work 12-hour shifts (day or night), often in tough weather conditions. You may be away from home for extended periods, including weekends and holidays. But if&nbsp;you’re&nbsp;up for the challenge, the rewards are big. &nbsp;</p><br><p>You’ll&nbsp;join one of our specialized product lines, such as: &nbsp;</p><br><ul> <li>Completions &nbsp;</li> <li>Drilling Services &nbsp;</li> <li>Wireline Services &nbsp;</li> <li>Artificial Lift &nbsp;</li> <li>Well Services &nbsp;</li> <li>Managed Pressure Drilling…and many more &nbsp;</li></ul><p><strong>Why Join Us?</strong> &nbsp;</p><br><ul> <li>Fast-track your career with structured development and mentorship &nbsp;</li> <li>Work with&nbsp;cutting-edge&nbsp;technology in real-world settings &nbsp;</li> <li>Travel, learn, and grow with a global leader in energy services &nbsp;</li> <li>Open doors to future roles in operations, product management, sales, and more &nbsp;</li></ul><p>Ready to engineer your future? Apply now and start your journey with Weatherford&nbsp;</p><br><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><div> <p> <strong>Introduction</strong> </p> <p>Established in 1951, IOM is a Related Organization of the United Nations and the leading UN agency in the field of migration. Working closely with governmental, intergovernmental and non-governmental partners, IOM promotes humane and orderly migration for the benefit of all. It saves lives and protects people on the move, drives solutions to displacement, and facilitates pathways for regular migration, while providing services and advice to governments and migrants. </p> <p>IOM is committed to fostering a respectful, inclusive and supportive workplace where all employees can thrive professionally and feel valued. By creating such an environment, IOM aims to better harness the full potential of migration and strengthen its support to people on the move.</p> <p>IOM invites candidates from diverse backgrounds to apply and provides reasonable accommodation throughout the recruitment process when required. Learn more about IOM s workplace culture at IOM workplace culture | International Organization for Migration </p> <p>This Vacancy Notice is part of IOM s competitive mobility exercise, open for applications from internal and internal-equivalent candidates only. </p> <p> </p> <p> <strong>Organizational Context and Scope</strong> </p> <p>Under the overall guidance of the Chief of Mission (CoM) and the direct supervision of the Senior Programme Coordinator Peacebuilding and Stabilization Division, the Programme Officer (Technical Cooperation) will work in the framework of the ongoing Security Sector Reform, on technical cooperation including Community Policing and Border Management, and the community-based initiatives in Iraq to ensure the promotion of the democratic governance in this sector in Iraq. With focus on strengthening trust and cooperation between Law enforcement, Civil society, and communities to enhance the capacity in the area of Migration and Border Management.</p> </div> <div> <p> <strong>Required Qualifications and Experience</strong> </p> <p> <strong>Education</strong> </p> <ul> <li> <p>Master s degree in Police Science, Criminal Justice, Correction, Law Enforcement, or a related field from an accredited academic institution with five years of relevant professional experience; or;</p> </li> <li> <p>University degree in the above fields with seven years of relevant professional experience.<br> </p> </li> </ul> <p> <strong>Experience</strong> </p> <ul> <li> <p>Experience in the areas of Law enforcement and community and international policing and project management and implementation;</p> </li> <li> <p>Experience working with IOM and/or another UN agency is an advantage;</p> </li> <li> <p>Experience in the humanitarian and/or development field in an international setting; and,</p> </li> <li> <p>Experience in engaging with governmental representatives, police, civil society, and communities is highly desirable.<br> </p> </li> </ul> <p> <strong>Skills</strong> </p> <ul> <li> <p>A combination of police studies and qualifications and more than ten years law enforcement experience, with regard to International Police Relations, Operations and Police Capacity Building Programme Implementation in UN Missions;</p> </li> <li> <p>Knowledge of MS Office and Internet Explorer; </p> </li> <li> <p>Delivers on set objectives in hardship situations; </p> </li> <li> <p>Effectively coordinates actions with other implementing partners; </p> </li> <li> <p>Works effectively with local authorities, stakeholders, beneficiaries, and the broader community to advance country office or regional objective; and, </p> </li> <li> <p>Good computer skills (MS Office, Internet browsers).<br> </p> </li> </ul> <p> <strong>Languages</strong> </p> <p>For this position, fluency in English is required (oral and written).</p> <p>Working knowledge of Arabic and another official UN language (Chinese, French, Russian, and Spanish) is an advantage.</p> <p>Proficiency of language(s) required will be specifically evaluated during the selection process, which may include written and/or oral assessments.</p> <p> <strong>Required Competencies</strong> </p> <p>IOM s competency framework can be found at this link . Competencies will be assessed during the selection process.</p> <p> <strong>Values </strong>- all IOM staff members must abide by and demonstrate these five values:</p> <ul> <li> <strong>Inclusion and respect for diversity</strong>: Respects and promotes individual and cultural differences Encourages diversity and inclusion.</li> <li><br></li></ul></div><ol><li> </li> </ol></div></section>

<p><h4>About company</h4> <p>Belong, connect, grow, with KBR!<br> The KBR team delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.<br> KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Job purpose</h4> <p>This role aims to provide environmental technical support to the MFD. This role has a strong emphasis on environmental compliance and emergency response. Candidates should be recognised for expertise in the environmental function including but not limited to: emissions, disturbed lands remediation, biodiversity, ecological impacts and environmental management system, as well as waste management and minimisation. The environmental function supports company operations, and this person should have a customer-focused and change management mindset.</p> <h4>Duties and responsibilities</h4> <ul> <li>Implementing environmental policies and practices in Majnoon Oilfield development.</li> <li>Devising strategies to meet targets and encourage best practices.</li> <li>Devising the best tools and systems to monitor performance and implement strategies.</li> <li>Ensuring compliance with Iraqi environmental legislation.</li> <li>Assessing, analysing and collating environmental performance data and reporting information to internal staff, clients and regulatory bodies.</li> <li>Responsible for ensuring that the contractors are fully complying with all environmental policies and regulations of the MFD.</li> <li>Responsible for conducting environmental inspections, developing inspection reports, creating SMART actions and follow-up actions to closure, and supporting field environmental survey work.</li> <li>Supporting field environmental survey work.</li> <li>Supporting delivery of the soil and ground water and noise monitoring program.</li> <li>Responsible for air quality monitoring survey.</li> <li>Assessing, analysing, and collating environmental performance data and reporting information to internal staff and clients.</li> <li>Responsible for the complete environmental data analyses and collecting the water and ODS inventories.</li> <li>Supporting completion of all weekly, monthly, quarterly, and annual environmental reports.</li> <li>Analyzing the passive tubes, STPs reading and submitting a comprehensive report.</li> <li>Scheduling and managing the housekeeping campaigns in MFD.</li> <li>Keeping up to date with relevant changes in environmental legislation and initiatives, including international legislation where applicable.</li> <li>Producing educational or information resources for internal staff, clients or the general public.</li> <li>Delivering the annual World Environmental Day event in the field.</li> </ul> <h4>Qualification & training requirements</h4> <ul> <li>BSc in engineering degree or MSc in environment or equivalent.</li> <li>NEBOSH Environmental Management Certificate is preferred.</li> <li>Working knowledge of HSE-related activities and environmental monitoring programs.</li> <li>Certified ISO 45001 and ISO 14001 or equivalent.</li> </ul> <h4>Experience</h4> <ul> <li>Five years of relevant job experience within the oil & gas industry.</li> <li>Knowledge of HSE rules and regulations of the oil industry.</li> <li>Has an awareness of STP sampling and soil and groundwater-related matters.</li> <li>Knowledge in recognizing environmental issues and problems.</li> <li>Knowledge in using the noise handheld equipment.</li> <li>Experience in data managing and reporting.</li> <li>Demonstrable experience in all functional aspects of environmental monitoring programs, including environmental contract of air quality monitoring, soil and groundwater monitoring, noise monitoring program, environmental reports review, AAQMS (ambient air quality system) station managing and maintaining.</li> <li>Minimum of four years of responsible experience related to contaminated site assessment and remediation, environmental risk assessment, environmental field sampling, monitoring, instrumentation, laboratory analyses and data management.</li> </ul> <h4>Language proficiency, computer and software skills</h4> <ul> <li>MS Office: Excel – Intermediate, Word – Intermediate, PowerPoint – Intermediate.</li> <li>English – Intermediate (verbal & written).</li> </ul> <h4>Skills</h4> <ul> <li>IT skills (Excel, PowerPoint, Microsoft Office, SharePoint).</li> <li>Presentation skills and strong reporting skills.</li> <li>Communication skills, teamwork, and stakeholder engagement.</li> <li>A genuine interest in and understanding of environmental issues and relevant legislation.</li> <li>High proficiency with environmental software, e.g. Env Man as part of air quality monitoring and maintenance of environmental monitoring equipment.</li> </ul></p><p></p>

<p><h4>About company</h4> <p>Belong, connect, grow, with KBR!<br> The KBR team delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.<br> KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Job purpose</h4> <p>This role aims to provide environmental technical support to the MFD. This role has a strong emphasis on environmental compliance and emergency response. Candidates should be recognised for expertise in the environmental function including but not limited to: emissions, disturbed lands remediation, biodiversity, ecological impacts and environmental management system, as well as waste management and minimisation. The environmental function supports company operations, and this person should have a customer-focused and change management mindset.</p> <h4>Duties and responsibilities</h4> <ul> <li>Implementing environmental policies and practices in Majnoon Oilfield development.</li> <li>Devising strategies to meet targets and encourage best practices.</li> <li>Devising the best tools and systems to monitor performance and implement strategies.</li> <li>Ensuring compliance with Iraqi environmental legislation.</li> <li>Assessing, analysing and collating environmental performance data and reporting information to internal staff, clients and regulatory bodies.</li> <li>Responsible for ensuring that the contractors are fully complying with all environmental policies and regulations of the MFD.</li> <li>Responsible for conducting environmental inspections, developing inspection reports, creating SMART actions and follow-up actions to closure, and supporting field environmental survey work.</li> <li>Supporting field environmental survey work.</li> <li>Supporting delivery of the soil and ground water and noise monitoring program.</li> <li>Responsible for air quality monitoring survey.</li> <li>Assessing, analysing, and collating environmental performance data and reporting information to internal staff and clients.</li> <li>Responsible for the complete environmental data analyses and collecting the water and ODS inventories.</li> <li>Supporting completion of all weekly, monthly, quarterly, and annual environmental reports.</li> <li>Analyzing the passive tubes, STPs reading and submitting a comprehensive report.</li> <li>Scheduling and managing the housekeeping campaigns in MFD.</li> <li>Keeping up to date with relevant changes in environmental legislation and initiatives, including international legislation where applicable.</li> <li>Producing educational or information resources for internal staff, clients or the general public.</li> <li>Delivering the annual World Environmental Day event in the field.</li> </ul> <h4>Qualification & training requirements</h4> <ul> <li>BSc in engineering degree or MSc in environment or equivalent.</li> <li>NEBOSH Environmental Management Certificate is preferred.</li> <li>Working knowledge of HSE-related activities and environmental monitoring programs.</li> <li>Certified ISO 45001 and ISO 14001 or equivalent.</li> </ul> <h4>Experience</h4> <ul> <li>Five years of relevant job experience within the oil & gas industry.</li> <li>Knowledge of HSE rules and regulations of the oil industry.</li> <li>Has an awareness of STP sampling and soil and groundwater-related matters.</li> <li>Knowledge in recognizing environmental issues and problems.</li> <li>Knowledge in using the noise handheld equipment.</li> <li>Experience in data managing and reporting.</li> <li>Demonstrable experience in all functional aspects of environmental monitoring programs, including environmental contract of air quality monitoring, soil and groundwater monitoring, noise monitoring program, environmental reports review, AAQMS (ambient air quality system) station managing and maintaining.</li> <li>Minimum of four years of responsible experience related to contaminated site assessment and remediation, environmental risk assessment, environmental field sampling, monitoring, instrumentation, laboratory analyses and data management.</li> </ul> <h4>Language proficiency, computer and software skills</h4> <ul> <li>MS Office: Excel – Intermediate, Word – Intermediate, PowerPoint – Intermediate.</li> <li>English – Intermediate (verbal & written).</li> </ul> <h4>Skills</h4> <ul> <li>IT skills (Excel, PowerPoint, Microsoft Office, SharePoint).</li> <li>Presentation skills and strong reporting skills.</li> <li>Communication skills, teamwork, and stakeholder engagement.</li> <li>A genuine interest in and understanding of environmental issues and relevant legislation.</li> <li>High proficiency with environmental software, e.g. Env Man as part of air quality monitoring and maintenance of environmental monitoring equipment.</li> </ul></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Environmental Supervisor<br><br><p><b>Position <span>title</span></b>:HSE Environmental <span>Supervsior</span></p><br><br><p><b>Position <span>status:</span></b><span>LN</span></p><br><br><p><b>Position reports <span>to</span></b>:HSE Environmental <span>Lead</span></p><br><br><p><b><span>Department</span></b>:HSE <span>Department</span></p><br><br><p><b>Rotation <span>pattern</span></b>28/28</p><br><br><br><p><b>About Company</b></p><br><br><p><i><u>"Belong, Connect, Grow, with KBR!</u></i></p><br><br><br><p><i>The KBR team delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</i></p><br><br><br><p><i>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets."</i></p><br><br><br><p><b><span>Job Purpose</span></b></p><br><br><br><p>This role aims to provide environmental technical support to the MFD. This role has a strong emphasis on environmental compliance and emergency response. Candidates should be recognised for expertise in the environmental function including but not limited to: emissions, disturbed lands remediation, Biodiversity, Ecological impacts and Environmental management system, as well as waste management and minimisation. The Environmental function supports company operations, and this person should have a customer-focused and change management <span>mindset.</span></p><br><br><br><b><span>Duties and<span> Responsibilities</span></span></b><ul><li><span>Implementing</span> <span>environmental</span> <span>policies</span> <span>and</span> <span>practices</span> <span>in</span> <span>Majnoon</span> <span>Oilfield</span> <span>development</span></li><li><span>Devising</span> <span>strategies</span> <span>to</span> <span>meet</span> <span>targets</span> <span>and</span> <span>encourage</span> <span>best</span> <span>practices.</span></li><li><span>Devising</span> <span>the</span> <span>best</span> <span>tools</span> <span>and</span> <span>systems</span> <span>to</span> <span>monitor</span> <span>performance</span> <span>and</span> <span>implement</span> <span>strategies</span></li><li><span>Ensuring</span> <span>compliance</span> <span>with</span> <span>Iraqi</span> <span>environmental</span> <span>legislation.</span></li><li><span>Assessing,</span> <span>analysing</span> <span>and</span> <span>collating</span> <span>environmental</span> <span>performance</span> <span>data</span> <span>and</span> <span>reporting</span> <span>information </span>to internal staff, clients and regulatory bodies.</li><li><span>Responsible</span> <span>for</span> <span>ensuring</span> <span>that</span> <span>the</span> <span>contractors</span> <span>are</span> <span>fully</span> <span>complying</span> <span>with</span> <span>all</span> <span>environmental </span>policies and regulations of the MFD.</li><li><span>Responsible</span> <span>for</span> <span>conducting</span> <span>environmental</span> <span>inspections,</span> <span>developing</span> <span>inspection</span> <span>reports,</span> <span>creating </span>SMART actions and follow-up actions to closure, and Support Field Environmental survey <span>work.</span></li><li><span>Support</span> <span>field</span> <span>environmental</span> <span>survey</span> <span>work.</span></li><li><span>Support</span> <span>for</span> <span>delivering</span> <span>the</span> <span>Soil</span> <span>and</span> <span>Ground</span> <span>Water</span> <span>&amp;</span> <span>Noise</span> <span>Monitoring</span> <span>program.</span></li><li><span>Responsible</span> <span>for</span> <span>air</span> <span>quality</span> <span>monitoring</span> <span>survey.</span></li><li>Assessing, analysing, and collating environmental performance data and reporting information to internal staff and clients.</li><li><span>Responsible</span> <span>for</span> <span>the</span> <span>complete</span> <span>environmental</span> <span>data</span> <span>analyses</span> <span>and collecting</span> <span>the</span> <span>water</span> <span>and</span> <span>ODS inventories.</span></li><li><span>Support</span> <span>for</span> <span>completing</span> <span>all</span> <span>weekly,</span> <span>monthly,</span> <span>quarterly,</span> <span>and</span> <span>annual</span> <span>environmental</span> <span>reports.</span></li><li><span>Analyze</span> <span>the</span> <span>Passive</span> <span>tubes,</span> <span>STPs</span> <span>reading</span> <span>and</span> <span>submit</span> <span>a</span> <span>comprehensives</span> <span>report.</span></li><li>Schedule and manage the Housekeeping campaigns in MFD<span>.</span></li><li><span>Keeping</span> <span>up</span> <span>to</span> <span>date</span> <span>with</span> <span>relevant</span> <span>changes</span> <span>in</span> <span>environmental</span> <span>legislation</span> <span>and</span> <span>initiatives,</span> <span>including </span>international legislation where applicable</li><li><span>Producing</span> <span>educational</span> <span>or</span> <span>information</span> <span>resources</span> <span>for</span> <span>internal</span> <span>staff,</span> <span>clients</span> <span>or</span> <span>the</span> <span>general</span> <span>public</span></li><li>Deliver on the annual World Environmental Day event in the <span>field.</span></li></ul><br><b>&nbsp;<span>Qualification &amp; Training <span>requirements</span></span></b><br><ul><li>BSc in Engineering degree or MSc in Environment or<span> equivalent.</span></li><li>NEBOSH Environmental Management Certificate is <span>preferred</span></li><li>Working knowledge of HSE-related activities and environmental monitoring <span>programs.</span></li><li>Certified ISO 45001 and ISO 14001 or<span> equivalent.</span></li></ul><br><br>&nbsp;<span>Experience</span> <ul><li>Five years of relevant job experience within the oil &amp; gas<span> industry.</span></li><li>Knowledge of HSE rules and regulations of the oil <span>industry.</span></li><li>Has an awareness of STP sampling and soil and groundwater-related<span> matters.</span></li><li>knowledge in recognizing environmental issues and <span>problems.</span></li><li>Knowledge in using the Noise handheld <span>equipment.</span></li><li>Experience in data managing and <span>reporting</span></li><li>Demonstrable experience in all functional aspects of Environmental Monitoring programs, including Environmental contract of Air quality monitoring, soil and groundwater monitoring, Noise Monitoring program, Environmental reports review, AAQMS (Ambient Air Quality System) Station Managing and maintaining.</li><li>Minimum of four years of responsible experience related to contaminated site assessment and remediation, environmental risk assessment, environmental field sampling, monitoring, instrumentation, laboratory analyses and data management</li></ul><br>&nbsp;<span>Language Proficiency, Computer and Software S<span>kills</span></span><br><ul><li>MS Office: Excel – Intermediate, Word – Intermediate, PowerPoint –<span> Intermediate.</span></li><li>English –intermediate (verbal &amp; <span>written).</span></li></ul><br>&nbsp;<span>Skills</span> <ul><li>IT Skills (Excel, PowerPoint, Microsoft Office, <span>SharePoint)</span></li><li>Presentation skills and strong reporting <span>skills.</span></li><li>Communication skills, teamwork, and stakeholder engagement. A genuine interest in and understanding of environmental issues and relevant legislation.</li><li>High proficiency with Environmental Software, e.g. Env Man as part of Air Quality monitoring and Maintenance of Environmental Monitoring equipment.</li></ul><br><br><br> </div>

<p><h4>Belong, connect, grow, with KBR!</h4> <p>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</p> <p>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Job description</h4> <h4>Delivery coordinator</h4> <p>28/28 Basra</p> <h4>Overview</h4> <p>The Delivery Coordinator will serve as the primary integrator between the construction and commissioning teams across multiple projects, ensuring smooth and efficient coordination of all interfaces. These projects include, but are not limited to, tie-ins, power projects, oil and gas projects and facilities. The role involves close collaboration with the client's project and operations team to ensure project alignment, successful completion and handover.</p> <h4>Key responsibilities</h4> <ol> <li><strong>Construction & mechanical completion</strong><br> Act as the liaison between the construction and commissioning teams to ensure a seamless transition from mechanical completion to commissioning.<br> Oversee and track the mechanical completion status and ensure all relevant documentation is provided to the commissioning team.<br> Facilitate the timely handover of systems from construction to commissioning, ensuring all pre-commissioning activities are completed as per the agreed schedule.<br> Coordinate construction punch lists and ensure resolution before the systems are handed over for commissioning.<br> Support in resolving construction-related issues that impact commissioning, ensuring these are addressed proactively.</li> <li><strong>Interface management</strong><br> Manage interfaces across various projects, including tie-ins, power projects, and oil and gas operations, ensuring integration and alignment between different teams and systems.<br> Facilitate communication and coordination between the construction, commissioning, and interface teams to ensure all critical paths are tracked and managed effectively.<br> Ensure that all interface-related activities (tie-ins, utilities, etc.) are communicated and planned in coordination with the client's project and operations team.<br> Maintain a comprehensive interface register to track and manage all critical points of interaction between construction and commissioning teams.</li> <li><strong>Commissioning support</strong><br> Work closely with the commissioning team to support requirements for pre-commissioning and commissioning activities in line with schedule.<br> Monitor the readiness of sub-systems, systems and equipment for commissioning, ensuring any potential bottlenecks are communicated and addressed promptly.<br> Ensure that commissioning requirements remain a focus during construction phases in line with schedule requirements to avoid delays or rework during the pre-commissioning and commissioning stages.<br> Support and facilitate start-up readiness and assurance including pre-start-up audits and checks (i.e. TIV, PSSR, SUOP, PSUA, SOF, VCR) where applicable.<br> Support and facilitate communication and coordination with commissioning and operational readiness to ensure a smooth transition through commissioning, ready for start-up (RFSU), start-up and handover; ensuring a collaborated approach with client's project and operations teams.</li> <li><strong>Reporting & communication</strong><br> Provide regular reports on the progress of mechanical completion, interface coordination, and commissioning readiness to both internal teams and external stakeholders.<br> Ensure all stakeholders are updated on any changes in schedules, priorities, or issues impacting construction and commissioning timelines.<br> Develop and maintain strong relationships with company’s project and operations teams to promote a collaborated environment for progress and inclusive problem-solving.</li> <li><strong>Construction risk management</strong><br> Update the construction risk register on a weekly basis or whenever required.<br> Identify potential risks and bottlenecks at the construction-commissioning interface and work with relevant teams to mitigate these risks.<br> Ensure that interface-related issues are escalated and resolved in a timely manner to avoid delays in project completion.</li> </ol> <h4>Key interfaces</h4> <ul> <li>Construction teams</li> <li>Commissioning teams</li> <li>Contractors and subcontractors</li> <li>Clients project and operations teams (BOC & AOS)</li> </ul> <h4>Skills & qualifications</h4> <ul> <li>Strong background in EPCM projects, particularly in oil and gas.</li> <li>Extensive experience in construction and commissioning (12+ years), with an understanding of mechanical completion processes and commissioning.</li> <li>Excellent communication and coordination skills to manage multiple stakeholders.</li> <li>Prior experience working in the Majnoon field and familiarity with the operator (Anton Oil) and client (BOC) is preferred.</li> </ul></p><p></p>