Embedded Systems Engineer Jobs in Iraq

<p><h4>Essential responsibilities:</h4> <p>Aerostat operators/user-level maintainers will participate in the overall, hands-on operation of the aerostat system including launch, in-flight, recovery, and moored activities.</p> <p>Candidates will perform all functions to operate the PGSS/PTDS, an aerostat mounted intelligence, surveillance, and reconnaissance (ISR) platform, its mobile mooring platform (MMP), sensor payload(s), communications and navigation systems as well as associated support equipment (boom lift, forklift, all terrain vehicles (ATVs), and electrical power generators).</p> <p>Candidate will perform user-level maintenance functions including performing hands-on preventative maintenance checks and services (PMCS), troubleshooting, removing and replacing line replaceable units (LRUs), and removing and replacing payloads.</p> <p>Candidate must possess a diverse range of skills with the ability to quickly adapt to new situations. Tasks will be performed under direction of higher classified technicians and/or site personnel.</p> <h4>Minimum requirements:</h4> <ul> <li>High school diploma or equivalent is required.</li> <li>Two-year associate’s degree in a technical field from an accredited college can substitute for work experience.</li> <li>Must have an active secret US government clearance or the ability to obtain a secret clearance. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must have a valid U.S. passport with a minimum of one year remaining.</li> <li>Must have valid US driver’s license.</li> <li>Knowledge of and experience in the operations of hardware systems and components.</li> <li>Experience in fault detection, isolation, and correction of hardware systems and individual components.</li> <li>Ability to perform routine system maintenance and analysis functions including: hardware configurations; adding, removing and replacing hardware components; use of hardware and software diagnostic testing tools; reading of electronic circuit schematics; and repairing printed circuit boards.</li> <li>At least one (1) year previous aerostat experience OR two (2) years of experience in the following areas may be substituted in lieu of aerostat experience:</li> </ul> <p><strong>1) Electrical maintenance mechanic</strong></p> <ul> <li>Possess at least two (2) years aerostat experience as an operator at the 20 series level or greater from Army MOS 35F (Intelligence Analyst), 35G (Geospatial Intelligence Imagery Analyst), 35H (Common Ground System Analyst), 96R (Ground Surveillance Systems Operator), 96U (Unmanned Aerial Vehicle Operator), or military branch equivalent.</li> <li>Two years of hands-on experience in performing operations and maintenance tasks either on an aerostat system or a related industry/military equivalent is required.</li> <li>Must be qualified at the 10 series or greater level (via military or civilian technical schools) is required.</li> <li>Ability to read electronic schematics.</li> <li>O&M of electro-mechanical equipment to include one or more of the following: <ul> <li>Hydraulic/servo valves</li> <li>Hydraulic actuators, control systems</li> <li>Test and diagnostic equipment</li> </ul> </li> </ul> <p><strong>2) Networking, IT & information systems</strong></p> <ul> <li>Two years’ experience is required.</li> <li>Must be qualified at the 10 series or greater level; MOS 25B/F or other military branch equivalent or industry occupational specialties as a CISCO Network Administrator; Army MOS 25L/N or other military branch equivalent or industry occupational specialties as a Network Installation (BICSI or Network + or Comp T Certification) will be considered.</li> <li>CCIE certification with fiber optic certification is preferred.</li> </ul> <p><strong>3) Mechanical maintenance</strong></p> <ul> <li>Mechanical maintenance with qualifications at the 10 series or greater from U.S. Army MOS 94D/X and 91/B/S/W or other military branch equivalent, or industry occupational specialties such as National Institute for Automotive Service Excellence (ASE) Certified Truck Mechanic or Federal Aviation Administration (FAA) General Mechanic 1 or greater.</li> <li>Two years of hands-on experience on an aerostat system or a related industry/military equivalent is required.</li> <li>O&M of mechanical equipment to include one or more of the following: hydraulic systems, winch systems, tether/cable handling systems, industrial generator sets, power switch gear, HVAC, cranes aerial lift, forklift, industrial generator sets.</li> </ul> <h4>Physical requirements:</h4> <ul> <li>Requires the ability to regularly lift up to 50 lbs.</li> <li>Requires the ability to regularly climb extension ladders, roof ladder, stepladders, and stairs at least 10 times during shift.</li> <li>Requires the flexibility to bend/stoop, squat repetitive during shift.</li> <li>Requires the ability to regularly kneel repetitive for shift.</li> <li>Requires the ability to move in a 90-degree fashion on a repetitive basis for shift.</li> <li>Requires the ability to stretch/reach on a repetitive basis for shift.</li> <li>Requires the ability to walk extensively throughout the plant during shift.</li> <li>Requires the ability to interact with all clients in a professional and friendly manner despite periods of stress.</li> </ul> <h4>Medical requirements:</h4> <p>Successfully complete and pass the medical and dental examinations as required by the employer and customer for deployment to Iraq.</p> <p>Must maintain physical and dental requirements for the duration of the deployment.</p> <h4>Working and living conditions:</h4> <p>This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environment. Temperatures can reach 120-130 degrees Fahrenheit/50-55 degrees Celsius during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to CENTCOM, EUCOM, and AFRICOM for extended periods. Work schedules are a minimum of 6 days per week and 10 hours per day, while some jobs have higher daily and weekly minimums.</p></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> About the job Senior Salesforce Development &amp; Architecture Lead <p>Our client, a renowned company in the fintech industry, is looking for an experienced<strong> Senior Salesforce Development &amp; Architecture Lead </strong>to join their team <strong>remotely.</strong> The Senior Salesforce Development &amp; Architecture Lead will define the Salesforce platform's technical strategy, architecture, and development direction, ensuring secure, scalable, and high-performing solutions that support critical business operations. This role combines hands-on technical leadership with architectural oversight, mentoring development teams, and collaborating closely with business and technology stakeholders.</p><br> Responsibilities: <ul><li>Lead the architecture, development, and deployment of enterprise-scale Salesforce solutions using Apex, Lightning Web Components (LWC), Visualforce, and Salesforce Platform capabilities.</li><li>Define and drive Salesforce architecture standards, development best practices, governance, and coding guidelines.</li><li>Lead the implementation and customization of Salesforce across Sales Cloud, Service Cloud, and Experience Cloud.</li><li>Partner with business stakeholders, product owners, and technical teams to translate business requirements into scalable, secure, and maintainable solutions.</li><li>Design and oversee integrations with payment platforms, core banking systems, enterprise applications, and microservices using REST/SOAP APIs and enterprise integration patterns.</li><li>Ensure platform scalability, reliability, security, and performance in a high-volume fintech environment.</li><li>Provide technical leadership through solution design, code reviews, mentoring, and technical guidance.</li><li>Establish and enforce Salesforce security architecture, data access models, and compliance with industry best practices.</li><li>Lead troubleshooting of complex technical issues, performance bottlenecks, and production incidents.</li><li>Drive Git-based version control, CI/CD pipelines, automated testing, and release management.</li><li>Collaborate with enterprise architects and cross-functional teams to align Salesforce solutions with the organization's technology strategy.</li><li>Evaluate new Salesforce capabilities and emerging technologies to continuously improve the platform.</li><li>Maintain technical documentation, architecture diagrams, and integration documentation.</li></ul> Qualifications: <ul><li>Bachelor's degree in Computer Science, Engineering, Information Technology, or a related field.</li><li>8–10+ years of Salesforce development experience, including solution architecture and technical leadership.</li><li>Strong expertise in Apex, SOQL, SOSL, Lightning Web Components (LWC), Visualforce, Salesforce APIs, and platform customization.</li><li>Extensive experience with Sales Cloud, Service Cloud, and Experience Cloud.</li><li>Deep understanding of Salesforce architecture, data modeling, security, governor limits, and performance optimization.</li><li>Proven experience designing and implementing complex integrations using REST/SOAP APIs, asynchronous processing, middleware, and enterprise integration patterns.</li><li>Experience integrating Salesforce with enterprise applications (e.g., payment platforms, banking systems, or ERP solutions) is highly preferred.</li><li>Hands-on experience with Git, CI/CD pipelines, and DevOps practices.</li><li>Demonstrated experience leading development teams, mentoring engineers, and driving architectural decisions.</li><li>Salesforce certifications such as Platform Developer II, Application Architect, System Architect, or Certified Technical Architect (CTA) are highly preferred.</li><li>Excellent problem-solving, communication, and stakeholder management skills.</li><li>English required; Arabic is a plus.</li></ul> <br> <br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Our client, a renowned company in the fintech industry, is looking for an experienced Senior Salesforce Development &amp; Architecture Lead to join their team remotely. The Senior Salesforce Development &amp; Architecture Lead will define the Salesforce platform's technical strategy, architecture, and development direction, ensuring secure, scalable, and high-performing solutions that support critical business operations. This role combines hands-on technical leadership with architectural oversight, mentoring development teams, and collaborating closely with business and technology stakeholders.</p><p><b>Responsibilities</b>:</p><ul><li>Lead the architecture, development, and deployment of enterprise-scale Salesforce solutions using Apex, Lightning Web Components (LWC), Visualforce, and Salesforce Platform capabilities.</li><li>Define and drive Salesforce architecture standards, development best practices, governance, and coding guidelines.</li><li>Lead the implementation and customization of Salesforce across Sales Cloud, Service Cloud, and Experience Cloud.</li><li>Partner with business stakeholders, product owners, and technical teams to translate business requirements into scalable, secure, and maintainable solutions.</li><li>Design and oversee integrations with payment platforms, core banking systems, enterprise applications, and microservices using REST/SOAP APIs and enterprise integration patterns.</li><li>Ensure platform scalability, reliability, security, and performance in a high-volume fintech environment.</li><li>Provide technical leadership through solution design, code reviews, mentoring, and technical guidance.</li><li>Establish and enforce Salesforce security architecture, data access models, and compliance with industry best practices.</li><li>Lead troubleshooting of complex technical issues, performance bottlenecks, and production incidents.</li><li>Drive Git-based version control, CI/CD pipelines, automated testing, and release management.</li><li>Collaborate with enterprise architects and cross-functional teams to align Salesforce solutions with the organization's technology strategy.</li><li>Evaluate new Salesforce capabilities and emerging technologies to continuously improve the platform.</li><li>Maintain technical documentation, architecture diagrams, and integration documentation.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor's degree in Computer Science, Engineering, Information Technology, or a related field.</li><li>8 10+ years of Salesforce development experience, including solution architecture and technical leadership.</li><li>Strong expertise in Apex, SOQL, SOSL, Lightning Web Components (LWC), Visualforce, Salesforce APIs, and platform customization.</li><li>Extensive experience with Sales Cloud, Service Cloud, and Experience Cloud.</li><li>Deep understanding of Salesforce architecture, data modeling, security, governor limits, and performance optimization.</li><li>Proven experience designing and implementing complex integrations using REST/SOAP APIs, asynchronous processing, middleware, and enterprise integration patterns.</li><li>Experience integrating Salesforce with enterprise applications (e.g., payment platforms, banking systems, or ERP solutions) is highly preferred.</li><li>Hands-on experience with Git, CI/CD pipelines, and DevOps practices.</li><li>Demonstrated experience leading development teams, mentoring engineers, and driving architectural decisions.</li><li>Salesforce certifications such as Platform Developer II, Application Architect, System Architect, or Certified Technical Architect (CTA) are highly preferred.</li><li>Excellent problem-solving, communication, and stakeholder management skills.</li><li>English required; Arabic is a plus.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Aerostat Operators provide Operations and Sustainment (O&amp;S) support for the Persistent Surveillance Systems Tethered (PSS-T) program in OCONUS site locations. PSS-T is comprised of former Persistent Ground Surveillance System (PGSS) and Persistent Threat Detection System (PTDS) programs. Position is contingent based upon availability and possible class dates. Updates to your application may be delayed. Essential Responsibilities: • Aerostat Operators/User-level maintainers will participate in the overall, hands-on operation of the aerostat system including launch, in-flight, recovery, and moored activities. • Candidates will perform all functions to operate the PGSS/PTDS, an aerostat mounted Intelligence, Surveillance, And Reconnaissance (ISR) platform, its Mobile Mooring Platform (MMP), Sensor Payload(s), communications and navigation systems as well as associated support equipment (Boom Lift, Forklift, All Terrain Vehicles (ATV's), and Electrical Power Generators). • Candidate will perform User-level maintenance functions include performing hands-on Preventative Maintenance Checks and Services (PMCS), troubleshooting, removing and replacing Line Replaceable Units (LRUs), and removing and replacing payloads. • Candidate must possess a diverse range of skills with the ability to quickly adapt to new situations. Tasks will be performed under direction of higher classified technicians and/or site personnel.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Minimum Requirements:</p><ul><li>High school diploma or equivalent is required.</li><li>Two-year Associate s degree in a technical field from an accredited college can substitute for work experience.</li><li>Must have an active Secret US Government Clearance or the ability to obtain a Secret clearance. Note: US Citizenship is required to obtain a Secret Clearance.</li><li>Must have a valid U.S. passport with a minimum of one year remaining.</li><li>Must have valid US Driver's license.</li><li>Knowledge of and experience in the operations of hardware systems and components.</li><li>Experience in fault detection, isolation, and correction of hardware systems and individual components.</li><li>Ability to perform routine system maintenance and analysis functions including: hardware configurations; adding, removing and replacing hardware components; use of hardware and software diagnostic testing tools; reading of electronic circuit schematics; and repairing printed circuit boards.</li><li>At least one (1) year previous Aerostat experience OR two (2) years of experience in the following areas may be substituted in lieu of aerostat experience:</li><ul><li>1) Electrical Maintenance Mechanic</li><ul><li>Possess at least two (2) year s aerostat experience as an operator at the 20 series level or greater from Army MOS 35F (Intelligence Analyst), 35G (Geospatial Intelligence Imagery Analyst), 35H (Common Ground System Analyst), 96R (Ground Surveillance Systems Operator), 96U (Unmanned Aerial Vehicle Operator), or military branch equivalent.</li><li>Two years of hands-on experience in performing operations and maintenance tasks either on an AEROSTAT system or a related industry/military equivalent is required.</li><li>Must be qualified at the 10 series or greater level (via military or civilian technical schools) is required.</li><li>Ability to read electronic schematics.</li><li>O&amp;M of electro-mechanical equipment to include one or more of the following:</li><ul><li>Hydraulic/servo valves</li><li>Hydraulic actuators, control systems</li><li>Test and diagnostic equipment</li></ul></ul><li>2) Networking, IT &amp; information systems</li><ul><li>Two years experience is required.</li><li>Must be qualified at the 10 series or greater level; MOS 25B/F or other military branch equivalent or industry occupational specialties as a CISCO Network Administrator; Army MOS 25L/N or other military branch equivalent or industry occupational specialties as a Network Installation (BICSI or Network + or Comp T Certification) will be considered.</li><li>CCIE certification with fiber optic certification is preferred.</li></ul><li>3) Mechanical Maintenance</li><ul><li>Mechanical Maintenance with qualifications at the 10 series or greater from U.S. Army MOS 94D/X and 91/B/S/W or other military branch equivalent, or industry occupational specialties such National Institute for Automotive Service Excellence (ASE) Certified Truck Mechanic or Federal Aviation Administration (FAA) General Mechanic 1 or greater.</li><li>Two years of hands-on experience on an AEROSTAT system or a related industry/military equivalent is required.</li><li>O&amp;M of mechanical equipment to include one or more of the following: Hydraulic systems, Winch systems, Tether/cable handling systems, Industrial generator sets, Power switch gear, HVAC, Cranes Aerial lift , Forklift , Industrial generator sets</li></ul></ul><p>Physical Requirements:</p><ul><li>Requires the ability to regularly lift up to 50 lbs.</li><li>Requires the ability to regularly climb extension ladders, roof ladder, stepladders, and stairs at least 10 times during shift.</li><li>Requires the flexibility to bend/stoop, squat repetitive during shift.</li><li>Requires the ability to regularly kneel repetitive for shift.</li><li>Requires the ability to move in a 90-degree fashion on a repetitive basis for shift.</li><li>Requires the ability to stretch/reach on a repetitive basis for shift.</li><li>Requires the ability to walk extensively throughout the plant during shift.</li><li>Requires the ability to interact with all clients in a professional and friendly manner despite periods of stress.</li></ul><p>Medical Requirements</p><ul><li>Successfully complete and pass the medical and dental examinations as required by Amentum and our customer for deployment to Iraq.</li><li>Must maintain physical and dental requirements for the duration of the deployment.</li></ul><p>Working and Living Conditions: This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environment. Temperatures can reach 130 degrees Fahrenheit/50-55 degrees Celsius during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to CENTCOM, EUCOM, and AFRICOM for extended periods. Work schedules are a minimum of 6 days per week and 10 hours per day, while some jobs have higher daily and weekly minimums.</p></ul><p></p></section>

<p>Under general autonomy and wide scope: The Well Engineering Manager functions as a technical Subject Matter Expert (SME), typically at the Country level staying abreast of current industry and PSL technological developments. 2 This position is accountable for the implementation of Engineering processes with respect to quality and integrity assurance. Reviews and maintains HMS processes to ensure the management system remains up-to-date with industry best practices. Responsible for approval of Well Designs and/or Programs and ensures these are in compliance with contracts, as well as, the Company's HMS policies &amp; procedures. Ensures all Operational Activities are adequately evaluated and a full Risk Matrix table with Mitigation plans is completed. Responsible for resolving critical engineering/operational issues, identifying chronic problems and proposing solutions, ensuring optimum technical solutions for field project development, and compliance with all Project/Contract metrics. Coordinates engineering programs/procedures and practices among different Projects and/or Rigs. Supports development of new technology and champions the application and deployment of the same. Leads technical presentations to client. Provides work direction and mentorship on a regular basis to Engineers. Responsible for the training &amp; development of Well Engineers and their competency development. Operates with significant level of technical and/or operational independence in all assigned areas.</p><p>Additional Role Responsibilities: (1) Ability and flexibility to travel to Iraq both domestically and internationally typically 28/28 days per business required. (2) Provides Managership and guidance to both planning and operational teams. (3) Demonstrates support of the management system (4) Manages all well planning, design and engineering activities associated with drilling, completions and abandonment operations. (5) Ensures the team properly consider design options, assess risks and validate costs and work closely with other Wells/technical teams, legislative bodes and service providers at various stages of the well planning process to ensure viability of proposals. (6) Manages well operations to effectively control the risk, technical execution, cost control and ensures compliance with policies and procedures. (7) Manages operational deviations from Company policy with suitable adherence to the risk assessment process. (8) Manages platform rig engineering in the planning and execution of rig maintenance, rig modifications, recertification and upgrades. (9) Ensures peer reviews, risk assessments, engineering/planning reviews, etc. are undertaken. (10) Sets performance targets and implements performance measurement and improvement processes. (11) Ensures that the lessons learned system is utilized to record lessons and used to transfer lessons into detail well planning to complete the full learning cycle.</p><p><strong>Desired Candidate Profile</strong></p><p>Requires an undergraduate degree in STEM, preferably in Petroleum or Mechanical Engineering, and 12+ years experience as a Well Engineer with knowledge of drilling, completions, intervention operations and techniques. Demonstrated experience in leading or supervising an engineering team. Must have a Well Control certificate.</p><p>Preferred Experience: Minimum of 15-years relevant experience in their discipline or in an operations environment within the oil &amp; gas industry.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span> <span></span></span><p>We are looking for the right people — people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world’s largest providers of products and services to the global energy industry.</p><br><b>Job Duties</b> <br><p><span>The Construction Manager is responsible for the complete administration and organization of construction and field personnel and directs the field effort through the activities of his staff. &nbsp;</span></p><br> <p><span>He reports directly to the Project Manager.</span></p><br> <ul> <li><span>Contributes to Construction Safety by reducing site exposure through modularization, standardization and maximizing off plot construction. &nbsp;</span></li> <li><span>Contributes in the development of brownfield construction strategies and planning initiatives for project opportunities pre FID. &nbsp;</span></li> <li><span>Focusses on addressing and removing hurdles to efficient construction and actively monitors productivity on site, advising (acting on behalf of) the construction manager of ways to improve the productivity metrics.</span></li> <li><span>Identifies and monitors brownfield construction planning initiatives for approved projects post FID.</span></li> <li><span>Will input into enhancing the design, contracting strategy and execution planning all in consideration of constructability through input into HSE, cost, schedule and quality.</span></li> <li><span>Acts as the Construction interface from the point of project inception to the point the project starts field execution.</span></li> <li><span>Ability to effectively work on more than one project at a time.&nbsp;<br>&nbsp;<br><span><strong><em>Accountabilities/ Expectations</em></strong><em>:</em></span><br></span></li> <li><span>Coordinate with Project Engineer and EPCM Construction Management Team to bring a coordinated approach to the overall project scope, quality, cost and schedule expectations.</span></li> <li><span>Ensure that planning of the project deliverables from Engineering and Contracts &amp; Procurement is line with the construction sequence and further to the hand over sequence.</span></li> <li><span>Ensures designs make optimal use of cold work, modularization and off plots construction to minimize HSSE exposure on site.</span></li> </ul><br><br><b>Qualifications</b> <br><ul> <li>Skills are typically acquired through completion of an undergraduate degree in architecture, engineering, or business administration, preferred Engineering branches., i.e. Mechanical, Civil, electrical, chemical, or equivalent.</li> <li>5 years of experience in project management which includes experience in facility construction or remodeling and management experience.</li> </ul> <p><strong>Preferred Experience:</strong><br>&nbsp;<br>• &nbsp; &nbsp;Minimum 15 years experience in &nbsp;Oil and Gas related project Design and Engineering&nbsp;<br>• &nbsp; &nbsp;Minimum 10 years experience in &nbsp;Oil and Gas Project Delivery as a Umbrella Contract &nbsp;Construction Manager function in a multidiscipline Workforce &nbsp;<br>• &nbsp; &nbsp;Experience in Productivity measurement resource based planning (Level 4 Scheduling)&nbsp;<br>• &nbsp; &nbsp;Strong Managerership and teambuilding skills&nbsp;<br>• &nbsp; &nbsp;Supervisory experience&nbsp;</p><br><br><br><br><p><strong>Halliburton is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation</strong>.</p><br> <p><strong><u>Location</u></strong></p><br> <p>Oils Opertion ST,N°29 Burjesia,&nbsp;Basra,&nbsp;Basrah,&nbsp;61006, Iraq</p><br> <p><strong><u>Job Details</u></strong></p><br> <p><strong>Requisition Number:</strong>&nbsp;211573&nbsp;&nbsp;<br><strong>Experience Level:&nbsp;</strong>Experienced Hire&nbsp;<br><strong>Job Family:</strong>&nbsp;Support Services&nbsp;<br><strong>Product Service Line:&nbsp;</strong>Halliburton Project Management&nbsp;&nbsp;&nbsp;<br><strong>Full Time / Part Time:&nbsp;</strong>Full Time</p><br> <p><strong>Additional Locations for this position:&nbsp;</strong></p><br> <p><u><strong>Compensation Information</strong></u><br>Compensation is competitive and commensurate with experience.</p><br> </div>

<p><h4>Job description: construction e&i lead</h4> <p>The lead construction engineer (E&I) will drive construction readiness, optimize field execution strategies, and ensure effective coordination between engineering, procurement, construction, commissioning, and operations. This position requires a seasoned professional capable of leading multidisciplinary teams and consistently achieving project safety, cost, schedule, and quality objectives.</p> <h4>Accountability / expectations</h4> <ul> <li>Enhance construction safety performance by promoting modularization, standardized assemblies, pre-fabricated E&I modules, and off-site construction to reduce field exposure.</li> <li>Develop brownfield and greenfield construction strategies, including tie-in planning, SIMOPS coordination, shutdown integration, and live-plant execution methodologies.</li> <li>Identify and resolve E&I construction challenges such as cable routing conflicts, hazardous area compliance issues, and instrument accessibility constraints.</li> <li>Monitor field productivity using discipline-specific KPIs (cable pulling rates, termination progress, loop completion curves, energization milestones).</li> <li>Lead construction planning, ensuring detailed sequencing for electrical load transfer, instrument migration, and control system cutover activities.</li> <li>Provide constructability input into electrical single-line diagrams, cable block diagrams, instrument indexes, control system architecture, and hazardous area layouts.</li> <li>Ensure design decisions align with HSE, cost, schedule, and quality requirements, validating field feasibility and installation constraints.</li> <li>Facilitate constructability reviews focused on cable routing, instrument maintainability, equipment lifting constraints, and hazardous area compliance.</li> <li>Serve as the primary E&I construction interface from project inception through field execution.</li> <li>Collaborate with construction management to develop execution plans covering power distribution, loop testing, control system migration, and cable management.</li> <li>Manage multiple concurrent E&I work fronts, ensuring resource leveling and contractor performance oversight.</li> <li>Ensure engineering and procurement deliverables (SLDs, ILDs, P&IDs, I/O lists, datasheets, cable drums, switchgear, instrument panels) align with construction sequencing and commissioning priorities.</li> <li>Prepare detailed E&I work packages including cable schedules, termination sheets, loop diagrams, installation drawings, and material take-offs.</li> <li>Review and update work package documentation, red-line markups, as-built records, and test documentation.</li> <li>Ensure compliance with IEC/NEC standards, ATEX/IECEx requirements, grounding and bonding standards, and project-specific electrical safety rules.</li> <li>Support commissioning teams in developing energization plans, loop testing protocols, instrument calibration procedures, and control system functional testing.</li> <li>Ensure construction activities integrate seamlessly with commissioning, operations, and other discipline interfaces.</li> <li>Advocate for cold-work strategies such as pre-terminated instrument cables, plug-and-play analyzer shelters, and pre-assembled marshalling cabinets.</li> <li>Align construction execution with project scope, quality, cost, and schedule targets.</li> <li>Ensure engineering and procurement deliverables meet construction and handover requirements.</li> <li>Implement work face planning to ensure crews receive fully validated work packages.</li> <li>Support interfaces with operations, ensuring safe and efficient brownfield and greenfield execution.</li> <li>Ensure final designs incorporate construction risk assessments and economic considerations.</li> </ul> <h4>Education</h4> <p>BSc. in instrumentation, electrical engineering, or a related discipline.</p> <h4>Experience requirements</h4> <ul> <li>Minimum 10+ years experience in oil & gas E&I design, construction, and commissioning.</li> <li>Strong understanding of:</li> <ul> <li>LV/MV electrical distribution</li> <li>Instrumentation installation and calibration</li> <li>Loop testing and commissioning workflows</li> </ul> <li>Proficiency in productivity measurement and resource-based planning (Level 4 scheduling).</li> <li>Proven leadership and supervisory experience in managing E&I construction teams and contractors.</li> <li>Strong organizational skills with the ability to manage multiple work fronts and shifting priorities.</li> <li>High attention to detail with a focus on quality, accuracy, and safe execution.</li> </ul></p><p></p>

<p><h4>Belong, connect, grow, with KBR!</h4> <p>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</p> <p>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Position status</h4> <p>Local</p> <h4>Position reports to</h4> <p>IT DC Manager</p> <h4>Department</h4> <p>IT</p> <h4>Rotation pattern</h4> <p>14/14</p> <h4>Job purpose</h4> <p>The Datacenter, Cloud & NetBackup Supervisor is responsible for supervising, administering, supporting, and optimizing data center infrastructure, private and hybrid cloud services, systems platforms, virtualization, enterprise storage, Veritas NetBackup, replication, and disaster recovery services.</p> <p>The role ensures that data center, cloud, systems, and backup services remain secure, available, scalable, recoverable, and compliant with business continuity requirements, while leading operational improvements, technical documentation, and coordination with vendors and internal teams.</p> <h4>Duties and responsibilities</h4> <ul> <li>Supervise daily data center operations, including servers, racks, power and UPS coordination, cooling, hardware health, asset lifecycle, monitoring, and infrastructure availability.</li> <li>Administer and support Huawei Cloud Stack services, ManageOne, FusionCompute, resource pools, tenants or projects, compute, storage, virtual networking, identity and access, and platform health.</li> <li>Manage VMware vSphere, vCenter, ESXi, clusters, templates, high availability, DRS, lifecycle updates, and virtual machine provisioning or decommissioning.</li> <li>Administer Windows Server and Linux systems, Active Directory, DNS, DHCP, Group Policy, patching, hardening, file services, and integration with monitoring and service management platforms.</li> <li>Manage Veritas NetBackup operations, including master and media servers, clients or agents, policies, schedules, storage units, retention, catalog protection, backup job monitoring, and failure resolution.</li> <li>Administer enterprise storage platforms, SAN or NAS connectivity, datastores, multipathing, allocation, performance, capacity planning, and integration with virtualization and backup services.</li> <li>Lead backup, restore, replication, and disaster recovery activities; conduct scheduled recovery tests against approved RPO and RTO targets and maintain evidence of successful recoverability.</li> <li>Troubleshoot complex infrastructure incidents, analyze logs and alerts, perform root-cause analysis, coordinate corrective actions, manage changes, and maintain complete technical documentation and SOPs.</li> </ul> <h4>Qualifications, training & certifications</h4> <ul> <li>Bachelor’s degree in Computer Engineering, Computer Science, Information Technology, Network Engineering, or a related discipline.</li> <li>At least one current professional certification in data center, cloud, virtualization, systems, storage, or enterprise backup technologies is required.</li> <li>Veritas NetBackup certification or equivalent enterprise backup and recovery certification is strongly preferred.</li> <li>Huawei HCIA-Cloud Computing or HCIP-Cloud Computing, together with Huawei Cloud Stack training, is strongly preferred.</li> <li>VMware Certified Professional - VCF Administrator or VVF Administrator is strongly preferred.</li> <li>Microsoft Certified: Windows Server Hybrid Administrator Associate or Azure Administrator Associate (AZ-104) is preferred for systems and hybrid cloud responsibilities.</li> <li>Cisco Certified Network Associate (CCNA) or equivalent networking certification is preferred.</li> <li>ITIL Foundation (current version) is preferred.</li> <li>Strong knowledge of data center operations, virtualization, storage, NetBackup, DR, Windows and Linux systems, networking, security, and scripting.</li> <li>Strong professional communication, analytical troubleshooting, technical leadership, architecture documentation, and reporting skills.</li> <li>Ability to supervise engineers and technicians, prioritize operational work, support critical incidents, and coordinate effectively with vendors and internal stakeholders.</li> </ul> <h4>Experience</h4> <ul> <li>7-10 years of professional experience in data center, cloud, virtualization, systems, enterprise backup, or infrastructure operations roles, including hands-on administration and support responsibilities.</li> <li>Minimum 4-6 years of hands-on experience with Huawei Cloud Stack, VMware, Windows or Linux systems, enterprise storage, Veritas NetBackup, replication, restore, and disaster recovery operations; supervisory or lead experience is preferred.</li> </ul> <h4>Language proficiency, computer and software skills</h4> <p><strong>Core platforms and tools:</strong><br> Huawei Cloud Stack, ManageOne, FusionCompute, VMware vSphere, vCenter, ESXi, VCF or VVF<br> Veritas NetBackup, Windows Server, Linux, Active Directory, DNS, DHCP, GPO, SAN/NAS storage, replication, and DR tools<br> PowerShell, PowerCLI, Python, monitoring tools, ITSM platforms, backup reporting, capacity and performance dashboards<br> English - upper intermediate or above (verbal and written)</p> <h4>Skills</h4> <ul> <li>Strong supervisory capability across data center, cloud, systems, virtualization, storage, and backup services, with strong availability, recoverability, and security awareness.</li> <li>Ability to manage incidents, problems, changes, risks, capacity, lifecycle activities, and service improvement actions within agreed service levels.</li> <li>Advanced troubleshooting and recovery mindset, with practical experience in backup validation, restore testing, platform health checks, and operational risk reduction.</li> <li>Strong organization, documentation, reporting, vendor coordination, and readiness to support critical incidents, migrations, upgrades, and disaster recovery activities.</li> </ul></p><p></p>

<p><h4>Essential responsibilities:</h4> <p>Aerostat operators/user-level maintainers will participate in the overall, hands-on operation of the aerostat system including launch, in-flight, recovery, and moored activities.</p> <p>Candidates will perform all functions to operate the PGSS/PTDS, an aerostat mounted intelligence, surveillance, and reconnaissance (ISR) platform, its mobile mooring platform (MMP), sensor payload(s), communications and navigation systems as well as associated support equipment (boom lift, forklift, all terrain vehicles (ATVs), and electrical power generators).</p> <p>Candidate will perform user-level maintenance functions including performing hands-on preventative maintenance checks and services (PMCS), troubleshooting, removing and replacing line replaceable units (LRUs), and removing and replacing payloads.</p> <p>Candidate must possess a diverse range of skills with the ability to quickly adapt to new situations. Tasks will be performed under direction of higher classified technicians and/or site personnel.</p> <h4>Minimum requirements:</h4> <ul> <li>High school diploma or equivalent is required.</li> <li>Two-year associate’s degree in a technical field from an accredited college can substitute for work experience.</li> <li>Must have an active secret US government clearance or the ability to obtain a secret clearance. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must have a valid U.S. passport with a minimum of one year remaining.</li> <li>Must have valid US driver’s license.</li> <li>Knowledge of and experience in the operations of hardware systems and components.</li> <li>Experience in fault detection, isolation, and correction of hardware systems and individual components.</li> <li>Ability to perform routine system maintenance and analysis functions including: hardware configurations; adding, removing and replacing hardware components; use of hardware and software diagnostic testing tools; reading of electronic circuit schematics; and repairing printed circuit boards.</li> <li>At least one (1) year previous aerostat experience OR two (2) years of experience in the following areas may be substituted in lieu of aerostat experience:</li> </ul> <p><strong>1) Electrical maintenance mechanic</strong></p> <ul> <li>Possess at least two (2) years aerostat experience as an operator at the 20 series level or greater from Army MOS 35F (Intelligence Analyst), 35G (Geospatial Intelligence Imagery Analyst), 35H (Common Ground System Analyst), 96R (Ground Surveillance Systems Operator), 96U (Unmanned Aerial Vehicle Operator), or military branch equivalent.</li> <li>Two years of hands-on experience in performing operations and maintenance tasks either on an aerostat system or a related industry/military equivalent is required.</li> <li>Must be qualified at the 10 series or greater level (via military or civilian technical schools) is required.</li> <li>Ability to read electronic schematics.</li> <li>O&M of electro-mechanical equipment to include one or more of the following: <ul> <li>Hydraulic/servo valves</li> <li>Hydraulic actuators, control systems</li> <li>Test and diagnostic equipment</li> </ul> </li> </ul> <p><strong>2) Networking, IT & information systems</strong></p> <ul> <li>Two years’ experience is required.</li> <li>Must be qualified at the 10 series or greater level; MOS 25B/F or other military branch equivalent or industry occupational specialties as a CISCO Network Administrator; Army MOS 25L/N or other military branch equivalent or industry occupational specialties as a Network Installation (BICSI or Network + or Comp T Certification) will be considered.</li> <li>CCIE certification with fiber optic certification is preferred.</li> </ul> <p><strong>3) Mechanical maintenance</strong></p> <ul> <li>Mechanical maintenance with qualifications at the 10 series or greater from U.S. Army MOS 94D/X and 91/B/S/W or other military branch equivalent, or industry occupational specialties such as National Institute for Automotive Service Excellence (ASE) Certified Truck Mechanic or Federal Aviation Administration (FAA) General Mechanic 1 or greater.</li> <li>Two years of hands-on experience on an aerostat system or a related industry/military equivalent is required.</li> <li>O&M of mechanical equipment to include one or more of the following: hydraulic systems, winch systems, tether/cable handling systems, industrial generator sets, power switch gear, HVAC, cranes aerial lift, forklift, industrial generator sets.</li> </ul> <h4>Physical requirements:</h4> <ul> <li>Requires the ability to regularly lift up to 50 lbs.</li> <li>Requires the ability to regularly climb extension ladders, roof ladder, stepladders, and stairs at least 10 times during shift.</li> <li>Requires the flexibility to bend/stoop, squat repetitive during shift.</li> <li>Requires the ability to regularly kneel repetitive for shift.</li> <li>Requires the ability to move in a 90-degree fashion on a repetitive basis for shift.</li> <li>Requires the ability to stretch/reach on a repetitive basis for shift.</li> <li>Requires the ability to walk extensively throughout the plant during shift.</li> <li>Requires the ability to interact with all clients in a professional and friendly manner despite periods of stress.</li> </ul> <h4>Medical requirements:</h4> <p>Successfully complete and pass the medical and dental examinations as required by the employer and customer for deployment to Iraq.</p> <p>Must maintain physical and dental requirements for the duration of the deployment.</p> <h4>Working and living conditions:</h4> <p>This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environment. Temperatures can reach 120-130 degrees Fahrenheit/50-55 degrees Celsius during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to CENTCOM, EUCOM, and AFRICOM for extended periods. Work schedules are a minimum of 6 days per week and 10 hours per day, while some jobs have higher daily and weekly minimums.</p></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Tasks and Responsibilities Provide first-line technical support for communications equipment across Control Risks Iraq operations.<br> Conduct fault finding, testing and basic diagnostics on Motorola handheld radios, Motorola vehicle-mounted radios, HF systems, UHF/VHF systems, TETRA radios, satellite phones, antennas, chargers, batteries and related accessories.<br> Assist with the installation, removal, inspection and testing of vehicle-mounted communications systems, including Motorola radios, HF/UHF equipment, antennas, speakers, microphones, power cables and mounting kits.<br> Support the installation, testing and troubleshooting of IVMS and vehicle tracking systems.<br> Conduct daily, weekly and monthly checks on communications equipment to confirm serviceability, battery condition, signal performance and operational readiness.<br> Maintain accurate electronic communications equipment records, including issue, return, inspection, fault reports, serial numbers and serviceability status.<br> Support project teams with communications-related issues, including radio checks, tracking device checks, signal issues and vehicle system faults.<br> Assist in programming, checking and preparing radios and communication equipment for project deployment, where authorised.<br> Ensure all communications and tracking equipment is correctly labelled, stored, charged, tested and ready for operational use.<br> Support the management of sensitive communications equipment in line with company procedures and local GoI/MoI requirements.<br> Liaise with suppliers, internal departments and project teams regarding communications equipment, repairs, installations and technical support.<br> Deputise for the Communications Manager when required, within agreed authority and capability.<br> Conduct any reasonable communications or technical equipment task requested by the Equipment management team.<br> Assist with project logistics support.<br> To include Preparation of mobilisation and de- mobilisation of projects Maintain accurate Logistics accounts across all commodity types.<br> Maintain accurate Logistics accounts across all commodity types Maintenance and delivery of equipment and materials, minimum stock levels, perform daily/weekly/monthly checks.<br> Competitive salary.<br> As an equal opportunities’ employer, we encourage suitably qualified applicants from a wide range of backgrounds to apply and join us and are fully committed to equal treatment, free from discrimination, of all candidates throughout our recruitment process.<br> Essential Good inter-personal skills and ability to liaise effectively with Iraqi agencies and suppliers.<br> Good English language, spoken and written.<br> IT literate, word, Excel.<br> Use of computer-based accounting systems.<br> Familiar with IVMS, tracking and Communication systems fitted to vehicles.<br> Familiar with vehicle electrical systems and comms integration.<br> Preferred Experience with software-based accounting systems.<br> Knowledge of Iraq Cultural norms &amp; business Etiquette.<br> Must maintain a neat and tidy appearance and be always presented well.<br> Qualifications and Specialist skills IT literate, word, Excel.<br> Use of computer-based accounting systems.<br> Familiar with IVMS, tracking and Communication systems fitted to vehicles Good English language, spoken and written.<br> Competencies Organised.<br> Flexible. Hardworking.<br> Ability to prioritise and multi-task.<br> Calm under pressure.<br> Proactive and able to take initiative.<br> Attention to detail</span> </div>

<p><h4>About company</h4> <p>Belong, connect, grow with KBR! The KBR team delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals. KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Job purpose</h4> <p>Field Production Technologist is part of the Well Reservoir Facilities Management team in the Petroleum Engineering Department. The primary job purpose is to ensure technical support to wells performance, close monitoring and maintain well integrity, respond to production planning and reservoir engineers requests for well deliverability and optimization decisions on site.</p> <h4>Duties and responsibilities</h4> <ul> <li>Daily production of well performance, spot anomalies, diagnose well production issues and performance monitoring according to well operating envelope.</li> <li>Monitor and manage well integrity to minimize deferment and ensure HSE policies compliance in a safe working environment.</li> <li>Provide operational support rigless activities including wireline, slickline, well integrity, and coiled tubing operations, ensuring seamless workflow.</li> <li>Daily monitoring of workover activities (hoist, rigless perforation, stimulation, clean up, tie-in, opening up etc.).</li> <li>Production enhancement and optimization strategy evaluation and implementation.</li> <li>Recommend well recompletion/well intervention activities, supervise on site.</li> <li>Provide support to other groups for well intervention, generate proposal, data acquisition, drilling and workover, etc.</li> <li>Coordinate and conduct completion meetings, internally and externally (other department and vendors).</li> <li>Conduct well and reservoir review, present recommendation to team and stakeholders as required.</li> <li>Ensure integration and consistency between engineering and geological interpretations by close collaboration with reservoir engineer and production planners, petrophysicists, geologists, geophysicist, operations and facilities engineers.</li> <li>Peer review less experienced team members.</li> </ul> <h4>Qualifications</h4> <ul> <li>Minimum of a bachelor degree in petroleum engineering, reservoir engineering or engineering from an accredited and recognized university.</li> <li>Previously working in a multi-cultural and multi-nationalities team.</li> <li>Knowledge of well completion, intervention, drilling and workover procedures and regulations.</li> <li>Oil and gas, wells design and integrity monitoring and management from conceptual and construction until abandonment.</li> </ul> <h4>Experience</h4> <ul> <li>Minimum 5-10 years’ experience with an operator.</li> <li>Experience in well intervention rigless operations and supervision.</li> <li>Experience in both clastic and carbonate reservoirs production strategies.</li> <li>Previously working in a multi-cultural and multi-nationalities team, international experience.</li> </ul> <h4>Language proficiency, computer and software skills</h4> <ul> <li>Must be able to speak upper intermediate and above English. Arabic is an advantage.</li> <li>Experience and knowledge of advanced level nodal analysis especially using integrated production system model (IPSM) modelling software.</li> <li>Experience in other petroleum engineering standard software (intermediate level): PI, Eclipse, PVTSim, Kappa’s Saphire.</li> <li>Experience in rigless well intervention operation, site supervision, work proposal and program preparation.</li> </ul> <h4>Skills</h4> <ul> <li>Good communication and analytical skills are essential.</li> <li>Eagerness to learn and develop own skills.</li> <li>Must have a HSSE driven mindset.</li> <li>The ability to work with people from different cultural backgrounds will be essential.</li> <li>Ability to quickly determine the optimal production solution, with often conflicting or missing data or information.</li> <li>Experience and good understanding of completion, workover, stimulation design, well test analysis, production forecast and artificial lifts.</li> <li>Experience in supervising operations of production enhancements, well completion, intervention and workover procedures and regulations.</li> <li>Proven wells integrity monitoring and management from drilling, production until abandonment.</li> <li>Good diagnostic skills are required to troubleshoot problems.</li> </ul></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Your mission is to be the engineer your team looks to for direction.<br> You will solve the complex problems in your team's domain independently, and you will raise the bar for everyone around you, in the code that ships, the tests that guard it, and the standards the team holds itself to.<br> DZ moves fast on a surface where mistakes cost real money: instant digital-goods fulfilment, live payments, chargeback exposure.<br> This role is about owning your team's domain deeply enough that speed and correctness stop being a trade-off.<br> What you'll do Own significant features and services end to end in your team's domain, architecting them with well-accepted patterns for iterative, autonomous development and future scale, applying bounded contexts and minimising cross-service dependencies so failures stay contained.<br> Consistently ship production-ready, self-documenting code, and set the team's standard for AI-assisted development: treat generated code like a peer PR, catch the subtly and confidently wrong output, and know when writing it by hand is faster and safer.<br> Apply TDD and mocks where they earn their place, refactor towards testability, and never merge untested code — including adding the failure cases that AI-generated happy-path tests omit.<br> Diagnose issues systematically within your services and across service boundaries, tune the team's monitoring, and use operational and business metrics as the basis for stability and performance work.<br> You'll be an active participant in your team's on-call.<br> Look actively for vulnerabilities in your own code and in peer reviews, applying secure defaults for auth, input validation and data handling, and design features with abuse in mind (rate limits, velocity checks, idempotency), flagging fraud and risk trade-offs early rather than after launch.<br> Anticipate and communicate blockers, delays and cost overruns before they need escalating, work dependencies to resolution without waiting on other teams, and drive continuous improvement of the team's practices.<br> Mentor teammates deliberately, including to build redundancy so you are not the only person who can support a critical part of the domain and maintain the runbooks and ADRs that make the team's context legible to both people and tooling.<br> Immediate, large-scale impact on a high-growth business Top-of-the-market compensation packages Work alongside top regional talent, with team members from Talabat, Careem, Etisalat, and more What you'll bring 5–8 years building production software, with deep ownership of services in a live, revenue-carrying system.<br> Strong depth in at least one of DZ's stacks (TypeScript, Go, C#) plus solid Postgres and AWS working knowledge, and the curiosity to get productive in the others.<br> Real expertise in a domain you've held for a while: the services, how they interact, and how data flows between them not just the parts you wrote.<br> A security and abuse lens by default: solid OWASP grasp, correct handling of secrets and sensitive data, and an understanding of payment-surface threats such as card testing and credential handling.<br> The judgement to weigh cost against value, including where AI leverage genuinely saves time versus where it adds risk someone will pay for later.<br> Communication that lands with technical and non-technical audiences alike, a habit of seeking feedback as readily as giving it, and comfort with open, respectful disagreement.<br></span> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span> <span></span></span><p>We are looking for the right people — people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world’s largest providers of products and services to the global energy industry.</p><br><b>Job Duties</b> <br><p>Under general supervision:</p><br> <ul> <li>Responsible for HAL contractual operations at the well site.</li> <li>Understands objectives of the well services operation and takes actions required to accomplish the objective.</li> <li>Responsible for reporting and protects the health and safety of employees, contractors, and the general public from harm resulting from operations.</li> <li>Protects the environment from damage resulting from operations.</li> <li>Coordinates work of product services lines and 3rd party subcontractors to meet engineered well design.</li> <li>Supervises day-to-day field operations at the well site.</li> <li>Matrix manager for HSE and logistics personnel on location.</li> <li>Maintains a high profile and leadership in HSE by active participation in HSE audits, inspections and reviews in accordance with the HSE Plan.</li> <li>Participates in and facilitate incident and near miss investigations, Validation of closed corrective actions and audit open items.</li> <li>Responsible for move-in and rig up, rig down and move-out of equipment.</li> <li>Directs well operations processes.</li> <li>Manages field operations to accomplish specified well services objectives within agreed-on time and cost objectives.</li> <li>Prepares a documented 7 day look ahead for equipment, materials, and personnel for the well operations every day.</li> </ul> <p><strong>Additional Role Responsibilities:</strong></p><br> <p>(1).In charge of management all the service order related wells; &nbsp;<br>(2).Contact with discipline engineer of Company regarding to the technical issue of Service order;&nbsp;<br>(3).Establish a working relationship and lines of communication with the supervisor to implement overall construction configuration management;&nbsp;<br>(4).Responsible for quantity take-off, control, tracking, reporting and forecasting;&nbsp;<br>(5).Specify the criteria for construction of facilities as required;&nbsp;<br>(6).Review material receiving reports and warehousing to assure delivery of correct materials;</p><br> <p>(7).Coordinate and monitor the interfaces for data exchange to support the construction plan and the project controls program requirements at the jobsite;&nbsp;<br>(8).Develop and manage the construction quality program;&nbsp;<br>(9).Review Sub-Contractor’s proposal for service order;&nbsp;<br>(10).Coordinate with Subcontractors to plan/support construction schedules;&nbsp;<br>(11).Plan and recommend procedures to be implemented by Subcontractor to ensure construction operations are within requirements of engineering design and specifications;</p><br> <p>(12).Coordinate subcontract activities to ensure materials, equipment and quality comply with design plans and specifications;&nbsp;<br>(13).Preparation of all required related to QA/QC documentation;&nbsp;<br>(14).Management and coordinate of local employee.</p><br><br><br><b>Qualifications</b> <br><ul> <li>Position requires current IADC or IWCF supervisory well control certification.</li> <li>Requires a high school diploma and a minimum of five years of rig site experience with at least three years of operational management experience.</li> <li>Undergraduate degree is preferred.</li> </ul> <p><strong>Preferred Experience:</strong><br>• &nbsp; &nbsp;Minimum of 10-years relevant experience in their discipline or in an operations environment within the oil &amp; gas industry.&nbsp;</p><br><br><br><br><p><strong>Halliburton is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation</strong>.</p><br> <p><strong><u>Location</u></strong></p><br> <p>Oils Opertion ST,N°29 Burjesia,&nbsp;Basra,&nbsp;Basrah,&nbsp;61006, Iraq</p><br> <p><strong><u>Job Details</u></strong></p><br> <p><strong>Requisition Number:</strong>&nbsp;211600&nbsp;&nbsp;<br><strong>Experience Level:&nbsp;</strong>Experienced Hire&nbsp;<br><strong>Job Family:</strong>&nbsp;Operations&nbsp;<br><strong>Product Service Line:&nbsp;</strong>Halliburton Project Management&nbsp;&nbsp;&nbsp;<br><strong>Full Time / Part Time:&nbsp;</strong>Full Time</p><br> <p><strong>Additional Locations for this position:&nbsp;</strong></p><br> <p><u><strong>Compensation Information</strong></u><br>Compensation is competitive and commensurate with experience.</p><br> </div>

<p><h4>About company</h4> <p>Belong, connect, grow, with KBR! The KBR team delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals. KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Job purpose</h4> <p>Production Technologist is part of the Well Reservoir Facilities Management team in the Petroleum Engineering Department. The primary job purpose is to ensure technical support to wells performance, close monitoring and maintain well integrity, respond to production planning and reservoir engineers requests for well deliverability and optimization decisions.</p> <h4>Duties and responsibilities</h4> <ul> <li>Daily production of well performance, spot anomalies, diagnose well production issues and performance monitoring according to well operating envelope.</li> <li>Monitor and manage well integrity to minimize deferment and ensure HSE policies compliance in a safe working environment.</li> <li>Daily monitoring of workover activities (hoist, rigless-perforation, stimulation, clean up, tie-in, opening up etc).</li> <li>Production enhancement and optimisation strategy evaluation and implementation.</li> <li>Recommend well recompletion/well intervention activities, supervise on site, and support FDP implementation.</li> <li>Regular update of well operating envelope according to reservoir management plan and work closely with production planning and production operations.</li> <li>Identify, propose and evaluate opportunities to improve hydrocarbon production and reservoir recovery.</li> <li>Provide support to other groups for well intervention, generate proposal, data acquisition, drilling and workover, etc.</li> <li>Coordinate and conduct completion meetings, internally and externally (other department and vendors).</li> <li>Maintain, perform nodal analysis and update IPM model to support WRFM team on future reservoir development, depletion planning and reserves assessment.</li> <li>Conduct well and reservoir review, present recommendation to team and stakeholders as required.</li> <li>Ensure integration and consistency between engineering and geological interpretations by close collaboration with reservoir engineer and production planners, petrophysicists, geologists, geophysicist, operations and facilities engineers.</li> <li>Peer review less experienced team members.</li> </ul> <h4>Qualifications</h4> <ul> <li>Minimum of a Bachelor degree in Petroleum Engineering, Reservoir Engineering or engineering from an accredited and recognized university.</li> <li>Previously working in a multi-cultural and multi-nationalities team.</li> <li>Knowledge of well completion, intervention, drilling and workover procedures and regulations.</li> <li>Oil and Gas, wells design and integrity monitoring and management from conceptual and construction until abandonment.</li> </ul> <h4>Experience</h4> <ul> <li>Minimum 10-15 years’ experience with an operator.</li> <li>Experience in both clastic and carbonate reservoirs production strategies.</li> <li>Previously working in a multi-cultural and multi-nationalities team, international experience.</li> </ul> <h4>Language proficiency, computer and software skills</h4> <ul> <li>Must be able to speak upper intermediate and above English. Arabic is an advantage.</li> <li>Experience and knowledge of advanced level nodal analysis especially using Integrated Production System Model (IPSM) modelling software.</li> <li>Experience in other petroleum engineering standard software (intermediate level): PI, Eclipse, PVTSim, Kappa’s Saphire.</li> </ul> <h4>Skills</h4> <ul> <li>Good communication and analytical skills are essential.</li> <li>Eagerness to learn and develop own skills.</li> <li>Strong leadership skills, ability to delegate, and work with minimum supervision.</li> <li>Must have a HSSE driven mindset.</li> <li>The ability to work with people from different cultural backgrounds will be essential.</li> <li>The position will involve working with government, vendors or partner representatives.</li> <li>Ability to quickly determine the optimal production solution, with often conflicting or missing data or information.</li> <li>Experience and good understanding of completion, workover, stimulation design, well test analysis, production forecast and artificial lifts.</li> <li>Experience in supervising operations of production enhancements, well completion, intervention and workover procedures and regulations.</li> <li>Proven wells integrity monitoring and management from drilling, production until abandonment.</li> <li>Good diagnostic skills are required to troubleshoot problems.</li> </ul></p><p></p>

<p><h4>About company</h4> <p>Belong, connect, grow, with KBR! The KBR team delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals. KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Job purpose</h4> <p>Electronic PTW (ePTW) Administrator will be responsible for ensuring the smooth implementation of the ePTW system in areas where it has already been rolled out, as well as supporting its rollout in new areas and departments. The Electronic Permit to Work (ePTW) Administrator is responsible for managing, maintaining, and supporting the electronic Permit to Work system to ensure safe, compliant, and efficient control of work activities. The role includes system administration, user support, permit workflow monitoring, training coordination, reporting, and ensuring consistent adherence to these procedures throughout the organization.</p> <h4>Duties and responsibilities</h4> <ul> <li>Administer and maintain the ePTW system and associated databases.</li> <li>Create, modify, deactivate, and manage user accounts, roles, and permissions.</li> <li>Configure workflows, templates, and system settings in line with company procedures.</li> <li>Monitor system performance and coordinate with IT/software vendors for troubleshooting and upgrades.</li> <li>Ensure data integrity, system availability, and backup compliance.</li> <li>Support ePTW development and rollout in Majnoon Oilfield and ensure smooth transition from a paper-based to an electronic PTW system.</li> <li>Support permit issuers, receivers, and approvers in the proper use of the ePTW system.</li> <li>Monitor live permits and ensure permits are processed according to approved workflows.</li> <li>Assist in resolving permit conflicts, workflow issues, and system-related delays.</li> <li>Coordinate contingency plans during system outages, including implementation of paper-based permits when required.</li> <li>Ensure the ePTW process complies with company HSE standards and regulatory requirements.</li> <li>Support implementation of isolation management and simultaneous operations (SIMOPS) controls.</li> <li>Maintain records and audit trails for permits, approvals, and system activities.</li> <li>Participate in HSE audits, inspections, and incident investigations related to permit control.</li> <li>Conduct user training and awareness sessions for employees and contractors.</li> <li>Provide coaching and technical support to system users.</li> <li>Develop user guides, procedures, and training materials.</li> <li>Support competency assessments related to ePTW usage.</li> <li>Generate daily, weekly, and monthly permit reports and KPIs.</li> <li>Maintain documentation related to system configuration, procedures, and change management.</li> <li>Track system issues, corrective actions, and improvement initiatives.</li> <li>Prepare management reports regarding permit statistics and system performance.</li> <li>Identify opportunities to improve the ePTW process and workflow efficiency.</li> </ul> <h4>Qualification</h4> <p>Suitable tertiary qualification, preferably technical.</p> <h4>Experience</h4> <ul> <li>Experience in Permit to Work systems, HSE operations, or industrial site administration.</li> <li>Familiarity with electronic Permit to Work software and workflow systems.</li> <li>Good understanding of isolation management, risk assessment, and work authorization processes.</li> </ul> <h4>Language proficiency, computer and software skills</h4> <ul> <li>English.</li> <li>Highly skilled in using Microsoft applications including Word, Excel, PowerPoint, and Outlook.</li> <li>Skill in software and database tools related to ePTW systems.</li> </ul> <h4>Key competencies</h4> <ul> <li>Ability to work in harsh environment.</li> <li>Culturally and ethically aware.</li> <li>Problem solving.</li> <li>Team coordination.</li> <li>Communication skills.</li> <li>Safety leadership.</li> <li>Analytical thinking.</li> </ul></p><p></p>

<p><h4>About company</h4> <p>Belong, connect, grow, with KBR! The KBR team delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals. KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Job purpose</h4> <p>Electronic PTW (ePTW) Administrator will be responsible for ensuring the smooth implementation of the ePTW system in areas where it has already been rolled out, as well as supporting its rollout in new areas and departments. The Electronic Permit to Work (ePTW) Administrator is responsible for managing, maintaining, and supporting the electronic Permit to Work system to ensure safe, compliant, and efficient control of work activities. The role includes system administration, user support, permit workflow monitoring, training coordination, reporting, and ensuring consistent adherence to these procedures throughout the organization.</p> <h4>Duties and responsibilities</h4> <ul> <li>Administer and maintain the ePTW system and associated databases.</li> <li>Create, modify, deactivate, and manage user accounts, roles, and permissions.</li> <li>Configure workflows, templates, and system settings in line with company procedures.</li> <li>Monitor system performance and coordinate with IT/software vendors for troubleshooting and upgrades.</li> <li>Ensure data integrity, system availability, and backup compliance.</li> <li>Support ePTW development and rollout in Majnoon Oilfield and ensure smooth transition from a paper-based to an electronic PTW system.</li> <li>Support permit issuers, receivers, and approvers in the proper use of the ePTW system.</li> <li>Monitor live permits and ensure permits are processed according to approved workflows.</li> <li>Assist in resolving permit conflicts, workflow issues, and system-related delays.</li> <li>Coordinate contingency plans during system outages, including implementation of paper-based permits when required.</li> <li>Ensure the ePTW process complies with company HSE standards and regulatory requirements.</li> <li>Support implementation of isolation management and simultaneous operations (SIMOPS) controls.</li> <li>Maintain records and audit trails for permits, approvals, and system activities.</li> <li>Participate in HSE audits, inspections, and incident investigations related to permit control.</li> <li>Conduct user training and awareness sessions for employees and contractors.</li> <li>Provide coaching and technical support to system users.</li> <li>Develop user guides, procedures, and training materials.</li> <li>Support competency assessments related to ePTW usage.</li> <li>Generate daily, weekly, and monthly permit reports and KPIs.</li> <li>Maintain documentation related to system configuration, procedures, and change management.</li> <li>Track system issues, corrective actions, and improvement initiatives.</li> <li>Prepare management reports regarding permit statistics and system performance.</li> <li>Identify opportunities to improve the ePTW process and workflow efficiency.</li> </ul> <h4>Qualification</h4> <p>Suitable tertiary qualification, preferably technical.</p> <h4>Experience</h4> <ul> <li>Experience in Permit to Work systems, HSE operations, or industrial site administration.</li> <li>Familiarity with electronic Permit to Work software and workflow systems.</li> <li>Good understanding of isolation management, risk assessment, and work authorization processes.</li> </ul> <h4>Language proficiency, computer and software skills</h4> <ul> <li>English.</li> <li>Highly skilled in using Microsoft applications including Word, Excel, PowerPoint, and Outlook.</li> <li>Skill in software and database tools related to ePTW systems.</li> </ul> <h4>Key competencies</h4> <ul> <li>Ability to work in harsh environment.</li> <li>Culturally and ethically aware.</li> <li>Problem solving.</li> <li>Team coordination.</li> <li>Communication skills.</li> <li>Safety leadership.</li> <li>Analytical thinking.</li> </ul></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><span><b>Job Title: IT Coordinator</b></span><br><br><b>Location:</b> Iraq<br><br> <b>Experience Required:</b> Minimum 5 Years<br><br><span><b>Job Summary</b></span><br></span><p>We are looking for a skilled and proactive IT Coordinator to manage and support the organization’s IT infrastructure. The ideal candidate will be responsible for installing, configuring, and maintaining hardware and software systems, while ensuring smooth day-to-day IT operations.<br></p><br><span><b>Key Responsibilities</b></span><br><ul><li>Install, configure, and maintain computer hardware, software, systems, networks, printers, and scanners<br></li><li>Provide technical support to employees (onsite and remote)<br></li><li>Troubleshoot system and network issues, diagnosing and solving hardware/software faults<br></li><li>Monitor and maintain IT systems to ensure maximum uptime and performance<br></li><li>Manage user accounts, permissions, and access rights<br></li><li>Coordinate with vendors for IT equipment procurement and maintenance<br></li><li>Ensure data security, backups, and recovery processes are in place<br></li><li>Assist in implementing IT policies, procedures, and best practices<br></li><li>Maintain IT inventory and documentation of systems and configurations<br></li><li>Support installation and setup of mobile devices and business applications<br></li></ul><br><span>Requirements<span><b>Requirements</b></span><br></span><ul><li>Bachelor’s degree in IT, Computer Science, or related field<br></li><li>Minimum 5 years of experience in IT support or coordination<br></li><li>Strong knowledge of hardware, networking, and operating systems (Windows, basic networking)<br></li><li>Experience in troubleshooting and system maintenance<br></li><li>Familiarity with IT security practices and backup systems<br></li><li>Good communication and problem-solving skills<br></li><li>Ability to work independently and handle multiple tasks<br></li></ul><br> </div>

<p>Toters is an on-demand e-commerce and delivery platform and operates a service that enables customers to get anything in their city at the highest level of convenience. At Toters, technology is at the heart of everything we do. We have product teams that are working hard every day to create products that make our customers' lives easier. Our engineers are also continuously creating solutions to make our processes more efficient, all in an effort to get to our customers fast and at the best cost. If you are interested in working in a high-growth startup environment, and look to be part of a team that will potentially change the way customers shop in the Middle East, apply now.</p><p>The Sales Officer is a person who is responsible for the training of merchants on the use of the our systems and for providing support when necessary.</p><p><b><br></b></p><p><b>Responsibilities</b></p><ul><li>Schedule daily meetings with signed leads / existing accounts</li><li>Visit stores on a daily basis to provide the necessary support</li><li>Share all store credentials with Commercial team</li><li>Train merchants on dashboard (Via web / tablet)</li><li>Support Account Managers in any further inductions / feature updates</li><li>Support merchants whenever there is a bug or malfunction in the system</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Problem solving skills and analytical skills</p><p>Solid experience with CRM software and MS Office (particularly MS Excel)</p><p>Proven ability to juggle multiple projects at a time, while maintaining sharp attention to detail</p><p>Excellent listening, negotiation and presentation skills</p><p>Strong verbal and written communication skills</p><p>Fluent in Arabic and English</p><p>BA/BS degree in Business Administration, Sales or relevant field</p><p>Extensive, accurate product knowledge</p><p>Tech Savvy</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>About Zaincash ZainCash Iraq is a leading mobile wallet in Iraq and recognized as Forbes top Fintech company of 2023 and 2024 as well as GSMA’s Best Mobile Innovation Supporting Humanitarian Situations.<br> The company offers a range of consumer and business services including local and international money transfer, bill payments, companion payment cards, payroll, aid disbursement, and more.<br> For more information, please visit www.<br>zaincash.iq. Responsibilities: 1.<br> HR Operations &amp; Administration: Handle all employee life cycle transactions including onboarding, transfers, promotions, and offboarding.<br> Prepare employment contracts, HR letters, and official correspondence.<br> Maintain and update employee records in HR systems and personnel files.<br> Ensure timely and accurate data entry in HRIS and document management systems.<br> Experience in payroll, compensations, social security, taxes is a plus.<br> 2. Employee Support &amp; Services: Serve as a point of contact for employee inquiries related to policies, procedures, and benefits.<br> Support the resolution of employee concerns by providing timely and accurate information.<br> Facilitate employee onboarding and ensure smooth integration into the organization.<br> Coordinate exit procedures including clearance, final settlement, and exit interviews.<br> 3. Attendance &amp; Leave Management: Monitor attendance records and validate data with timesheets or biometric systems.<br> Process leave applications and ensure compliance with internal policies and labor laws.<br> Support payroll with accurate data related to absences, leaves, and deductions.<br> 4. Compliance &amp; Reporting: Ensure all HR transactions comply with internal controls and legal requirements.<br> Prepare periodic reports on headcount, turnover, leaves, and other HR metrics.<br> Support internal and external audits by providing required documentation.<br> 5. Managing and overseeing Tax and Social Security processes: Calculating, reviewing, and reconciling Social Security contributions and tax deductions, ensuring alignment with payroll records and approved data.<br> Preparing and submitting monthly Tax and Social Security reports, declarations, and related documentation, while ensuring compliance with statutory deadlines and financial obligations.<br> Coordinating with relevant authorities and stakeholders, and managing all related procedures, reconciliations, inquiries, and compliance requirements to ensure adherence to applicable laws and regulations.<br> Bachelor’s degree in Human Resources, Business Administration, or related field.<br> 1-3 years of experience in employee services, HR administration, or operations.<br> Solid understanding of labor laws and HR policies.<br> Experience working with HRIS and document management systems is a plus.<br></span> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><strong> Tasks and Responsibilities</strong></p><br><ul><li>Provide first-line technical support for communications equipment across Control Risks Iraq operations.</li><li>Conduct fault finding, testing and basic diagnostics on Motorola handheld radios, Motorola vehicle-mounted radios, HF systems, UHF/VHF systems, TETRA radios, satellite phones, antennas, chargers, batteries and related accessories.</li><li>Assist with the installation, removal, inspection and testing of vehicle-mounted communications systems, including Motorola radios, HF/UHF equipment, antennas, speakers, microphones, power cables and mounting kits.</li><li>Support the installation, testing and troubleshooting of IVMS and vehicle tracking systems.</li><li>Conduct daily, weekly and monthly checks on communications equipment to confirm serviceability, battery condition, signal performance and operational readiness.</li><li>Maintain accurate electronic communications equipment records, including issue, return, inspection, fault reports, serial numbers and serviceability status.</li><li>Support project teams with communications-related issues, including radio checks, tracking device checks, signal issues and vehicle system faults.</li><li>Assist in programming, checking and preparing radios and communication equipment for project deployment, where authorised.</li><li>Ensure all communications and tracking equipment is correctly labelled, stored, charged, tested and ready for operational use.</li><li>Support the management of sensitive communications equipment in line with company procedures and local GoI/MoI requirements.</li><li>Liaise with suppliers, internal departments and project teams regarding communications equipment, repairs, installations and technical support.</li><li>Deputise for the Communications Manager when required, within agreed authority and capability.</li><li>Conduct any reasonable communications or technical equipment task requested by the Equipment management team.</li><li>Assist with project logistics support. To include Preparation of mobilisation and de- mobilisation of projects</li><li>Maintain accurate Logistics accounts across all commodity types.</li><li>Maintain accurate Logistics accounts across all commodity types Maintenance and delivery of equipment and materials, minimum stock levels, perform daily/weekly/monthly checks.</li></ul> </div>