Model Jobs in Iraq

<p><h4>Essential responsibilities:</h4> <p>Aerostat operators/user-level maintainers will participate in the overall, hands-on operation of the aerostat system including launch, in-flight, recovery, and moored activities.</p> <p>Candidates will perform all functions to operate the Persistent Ground Surveillance System (PGSS) and Persistent Threat Detection System (PTDS), an aerostat mounted Intelligence, Surveillance, and Reconnaissance (ISR) platform, its Mobile Mooring Platform (MMP), sensor payloads, communications and navigation systems, as well as associated support equipment including boom lift, forklift, all-terrain vehicles (ATVs), and electrical power generators.</p> <p>Additional responsibilities include performing analyses of system operations. Candidates must have:</p> <ul> <li>Knowledge of and experience in the operations of hardware systems and components.</li> <li>Experience in fault detection, isolation, and correction of hardware systems and individual components.</li> <li>Ability to perform routine system maintenance and analysis functions including hardware configurations; adding, removing, and replacing hardware components; use of hardware and software diagnostic testing tools; reading of electronic circuit schematics; and repairing printed circuit boards.</li> </ul> <p>Candidates will perform user-level maintenance functions including performing hands-on Preventative Maintenance Checks and Services (PMCS), troubleshooting, removing and replacing Line Replaceable Units (LRUs), and removing and replacing payloads.</p> <p>Candidates must possess a diverse range of skills with the ability to quickly adapt to new situations. Tasks will be performed under the direction of higher classified technicians and/or site personnel.</p> <h4>Minimum requirements:</h4> <ul> <li>High school diploma or equivalent is required.</li> <li>Two-year associate’s degree in a technical field from an accredited college can substitute for work experience.</li> <li>Must have an active Secret US Government clearance. US citizenship is required to obtain a Secret clearance.</li> <li>At least one year previous aerostat experience.</li> <li>Certified and school trained on 34M and 74K.</li> <li>Must have a valid U.S. passport with a minimum of one year remaining.</li> <li>Must have a valid US driver’s license.</li> <li>Knowledge of and experience in the operations of hardware systems and components.</li> <li>Experience in fault detection, isolation, and correction of hardware systems and individual components.</li> <li>Ability to perform routine system maintenance and analysis functions including hardware configurations; adding, removing, and replacing hardware components; use of hardware and software diagnostic testing tools; reading of electronic circuit schematics; and repairing printed circuit boards.</li> </ul> <h4>Physical requirements:</h4> <ul> <li>Requires the ability to regularly lift up to 50 lbs.</li> <li>Requires the ability to regularly climb extension ladders, roof ladders, stepladders, and stairs at least 10 times during shift.</li> <li>Requires the flexibility to bend/stoop and squat repetitively during shift.</li> <li>Requires the ability to regularly kneel repetitively during shift.</li> <li>Requires the ability to move in a 90-degree fashion on a repetitive basis during shift.</li> <li>Requires the ability to stretch/reach on a repetitive basis during shift.</li> <li>Requires the ability to walk extensively throughout the plant during shift.</li> <li>Requires the ability to interact with all clients in a professional and friendly manner despite periods of stress.</li> </ul> <h4>Medical requirements:</h4> <ul> <li>Successfully complete and pass the medical and dental examinations as required for deployment to Iraq.</li> <li>Must maintain physical and dental requirements for the duration of the deployment.</li> </ul> <h4>Working and living conditions:</h4> <p>This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to an extreme and austere desert-like environment. Temperatures can reach 120-130 degrees Fahrenheit (50-55 degrees Celsius) during the summer months.</p> <p>Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to CENTCOM, EUCOM, and AFRICOM for extended periods.</p> <p>Work schedules are a minimum of six days per week and ten hours per day, while some jobs have higher daily and weekly minimums.</p></p><p></p>

<p><h4>Company description</h4> <p>Why work for Accor?</p> <p>We are far more than a worldwide leader. We welcome you as you are and you can find a job and brand that matches your personality. We support you to grow and learn every day, making sure that work brings purpose to your life, so that during your journey with us, you can continue to explore Accor’s limitless possibilities.</p> <p>By joining Accor, every chapter of your story is yours to write and together we can imagine tomorrow's hospitality. Do what you love, care for the world, dare to challenge the status quo! #BELIMITLESS</p> <h4>Job description</h4> <p>We are seeking a professional and customer-focused waiter/waitress to join our dynamic hospitality team in Baghdad, Iraq. In this role, you will be the face of our establishment, delivering exceptional service and creating memorable dining experiences for our guests. Your enthusiasm, attention to detail, and collaborative spirit will be essential as you work to exceed guest expectations in a fast-paced environment.</p> <ul> <li>Greet guests warmly upon arrival and seat them in a timely and organized manner</li> <li>Present menus and provide knowledgeable recommendations about food and beverage offerings</li> <li>Take accurate food and beverage orders while demonstrating attentiveness to guest preferences and dietary requirements</li> <li>Communicate orders clearly to kitchen and bar staff to ensure efficient service delivery</li> <li>Serve food and beverages with professionalism, ensuring proper presentation and temperature standards</li> <li>Monitor guest satisfaction throughout their dining experience and respond empathetically to any concerns or special requests</li> <li>Process payments accurately using point of sale systems and handle cash transactions with integrity</li> <li>Clear and reset tables promptly while maintaining cleanliness and organization of the dining area</li> <li>Collaborate with team members to support smooth operations and assist colleagues during peak service times</li> <li>Maintain knowledge of menu items, ingredients, and preparation methods to answer guest questions confidently</li> <li>Follow all health, safety, and sanitation protocols to ensure a secure dining environment</li> <li>Demonstrate flexibility and resilience in adapting to changing priorities and guest needs</li> </ul> <h4>Qualifications</h4> <ul> <li>Previous customer service or food and beverage service experience (preferred)</li> <li>Fluency in English; additional language skills are a plus</li> <li>Strong interpersonal and communication skills with the ability to build rapport quickly</li> <li>Exceptional attention to detail and organizational abilities</li> <li>Physical stamina and ability to multitask in a fast-paced environment</li> <li>Reliable, punctual, and committed to maintaining professional standards</li> <li>Ability to work collaboratively as part of a diverse team</li> <li>Cash handling experience and basic mathematical skills</li> <li>Welcoming, upbeat personality with a genuine passion for delivering outstanding guest service</li> <li>Ability to remain calm, composed, and solution-focused under pressure</li> </ul></p><p></p>

<p><h4>Job description</h4> <p>The E&I Construction Supervisor supports the Construction E&I Lead in delivering safe, efficient, and high-quality field execution. The role focuses on supervising daily electrical and instrumentation construction activities, ensuring compliance with project requirements, and coordinating closely with contractors, engineering, and commissioning teams. This position requires solid technical experience, strong field supervision capability, and disciplined execution of work packages under the direction of the Lead.</p> <h4>Accountability / expectations</h4> <ul> <li>Promote safe work practices and ensure crews follow all electrical and instrumentation safety rules, permit requirements, and site procedures.</li> <li>Execute construction activities in accordance with approved drawings, work packages, and instructions provided by the Construction E&I Lead.</li> <li>Supervise contractor teams performing cable pulling, termination, installation of instruments, panels, junction boxes, and electrical equipment.</li> <li>Identify field issues such as routing clashes, accessibility concerns, and installation constraints, escalating them to the Lead for resolution.</li> <li>Track daily progress (cable pulling, terminations, loop completion) and report deviations or delays to the Lead.</li> <li>Support construction sequencing for electrical load transfer, instrument migration, and control system cutover as directed.</li> <li>Provide field input during constructability reviews, focusing on practical installation concerns, hazardous area compliance, and maintainability.</li> <li>Coordinate with other disciplines to ensure safe SIMOPS execution, proper tie-in preparation, and efficient brownfield/greenfield work.</li> <li>Ensure engineering and procurement deliverables received at site (SLDs, ILDs, P&IDs, I/O lists, datasheets, cable drums, panels) are verified and ready for installation.</li> <li>Prepare and verify work package components such as cable schedules, termination sheets, loop diagrams, and material take-offs under guidance from the Lead.</li> <li>Maintain accurate red-line markups, as-built updates, and test documentation for handover.</li> <li>Ensure installation complies with standards, requirements, grounding/bonding rules, and project specifications.</li> <li>Support commissioning teams with loop testing, instrument calibration, energization preparation, and functional testing activities.</li> <li>Monitor contractor performance, manpower allocation, and work-front readiness, escalating resource gaps or performance issues.</li> <li>Implement Work Face Planning by ensuring crews receive validated work packages and required materials.</li> <li>Support coordination with operations for safe execution in live plant areas.</li> <li>Apply cold-work strategies such as pre-terminated cables, pre-assembled cabinets, and modular assemblies when instructed by the Lead.</li> <li>Ensure construction execution aligns with project quality, schedule, and scope expectations.</li> </ul> <h4>Education</h4> <p>BSc. in Instrumentation, Electrical Engineering, or related discipline.</p> <h4>Experience requirements</h4> <ul> <li>Minimum 5–10 years experience in Oil & Gas E&I construction.</li> <li>Strong understanding of:</li> <ul> <li>LV/MV electrical distribution</li> <li>Instrument installation and calibration</li> <li>Loop testing and commissioning workflows</li> </ul> <li>Experience supervising E&I construction crews and contractors.</li> <li>Ability to manage multiple work fronts under direction from the Lead.</li> <li>High attention to detail, quality, and safe execution.</li> </ul></p><p></p>

<p>We are seeking a professional and customer-focused Waiter/Waitress to join our dynamic hospitality team in Baghdad, Iraq. In this role, you will be the face of our establishment, delivering exceptional service and creating memorable dining experiences for our guests. Your enthusiasm, attention to detail, and collaborative spirit will be essential as you work to exceed guest expectations in a fast-paced environment. Greet guests warmly upon arrival and seat them in a timely and organized manner Present menus and provide knowledgeable recommendations about food and beverage offerings Take accurate food and beverage orders while demonstrating attentiveness to guest preferences and dietary requirements Communicate orders clearly to kitchen and bar staff to ensure efficient service delivery Serve food and beverages with professionalism, ensuring proper presentation and temperature standards Monitor guest satisfaction throughout their dining experience and respond empathetically to any concerns or special requests Process payments accurately using point of sale systems and handle cash transactions with integrity Clear and reset tables promptly while maintaining cleanliness and organization of the dining area Collaborate with team members to support smooth operations and assist colleagues during peak service times Maintain knowledge of menu items, ingredients, and preparation methods to answer guest questions confidently Follow all health, safety, and sanitation protocols to ensure a secure dining environment Demonstrate flexibility and resilience in adapting to changing priorities and guest needs</p><p><strong>Desired Candidate Profile</strong></p><p>Previous customer service or food and beverage service experience (preferred) Fluency in English; additional language skills are a plus Strong interpersonal and communication skills with the ability to build rapport quickly Exceptional attention to detail and organizational abilities Physical stamina and ability to multitask in a fast-paced environment Reliable, punctual, and committed to maintaining professional standards Ability to work collaboratively as part of a diverse team Cash handling experience and basic mathematical skills Welcoming, upbeat personality with a genuine passion for delivering outstanding guest service Ability to remain calm, composed, and solution-focused under pressure</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview ***This position is physically located in Balad, Iraq*** Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. Under the supervision of the Maintenance Manager Sr., the Vehicle Maintenance Manager manages the daily operation of Maintenance Department (MAINT) Field Maintenance Support (FMS) in support of the program. The Vehicle Maintenance Manager provides operational guidance and supervision to ensure compliance with the Performance Work Statement (PWS). Support capabilities include Production Control, Maintenance Sections (Wheel, Track, Armament/Small Arms, Heavy Equipment, Engineer &amp; Special Purpose Equipment, HVAC, and Power Generation), Allied Trades and Locksmith. Responsibilities This position description is subject to change at any time as needed to meet the requirements of the program or company. + Monitors Maintenance program production schedules and ensures all missions are executed on time and at the highest quality level possible. + Maintains frequent contact with customers regarding Maintenance performance and overall customer satisfaction. + Interfaces with customer contract personnel to ensure adherence to all contractual requirements. + Coordinates staffing requirements and technical approach for all task orders. Coordinates efforts to attain facilities and required infrastructure support for all task order off-site operations. + Ensures that the responsibilities, authorities, and accountability of all direct subordinates are defined and understood. + Ensures an operating environment which promotes and foster the principles of teamwork and a sound EHS culture. + Conducts regularly scheduled reviews with assigned programs related to on-going operations, budgets, performance measurements, customer satisfaction, contract compliance and forecast status to determine maintenance area progress toward stated goals, objectives and requirements. + Ensures that all assigned program activities and operations are carried out in compliance with V2X employee relations policies. + Provides a safe and secure workplace. + Sets the example for respect, responsibility and integrity. + Provides reports on all life safety, quality, and maintenance issues. + Performs routine inspections of all maintenance sections. + Performs other duties as assigned. Qualifications + Minimum Qualifications: Education/Certifications: One-year related experience may be substituted for one year of education, if degree is required. + 6-8 years of maintenance experience with 2-3 years in a management capacity of a similar project/ department/branch related to these functions. + Experience: + 6-8 years in the management of maintenance programs. + Specific experience in U.S. Army logistics management desirable. + Must display behaviors which embrace the Leadership Competency model: Create the Future, Deliver Results, Build thru Teamwork, Inspire Commitment, and Lead with Character. + Skills: + High-level organizational and planning skills, so that workflow is managed efficiently and accurately, with strong written and briefing skills, and capability to plan without much detailed guidance + Senior-level inter-personal skills with the ability to interact effectively with a large and multi-ethnic workforce + Energy and stamina that meets constant cycle of meetings and briefings; strong listing skills and ability to give detailed direction and guidance + Expert written and oral communications, must have high level of proficiency in the use of MS office suite, including Word, Excel, Outlook, and other related applications + Must have technical skills in the development and maintenance of quality programs with a strong customer orientation and focus + Supervisory Responsibilities: + Directly responsible to the Logistics Director and has overall responsibility for policies and procedures used in the performance of work + Working Conditions: + Must be capable of working in an extreme weather conditions with temperatures exceeding 120 degrees Fahrenheit. + Indoor and/or outdoor environment with very adverse and harsh conditions (i.e., hot, dry, dusty, desert environment with average temperatures of 30 degrees in the winter and 130 degrees in the summer months). + Includes some industrial production environment conditions as well. + Physical Requirements: + Light work. Exerting up to 20 pounds of force occasionally, and/or up to 10 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects. + Work may require heavy lifting, stooping, climbing, prolonged standing, prolonged sitting, and working with or in areas where a potential could exist for exposure to physical, chemical, or biological agents. + Employee use of personal protective equipment (PPE) is required for some situations. PPE includes, but is not limited to, head, foot, torso, respiratory, vision, and hearing protective devices. + Must comply with all Fire and Safety Regulations and post policies. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>IT EPC Project Manager-Onsite<br><br><p><b>IT Infrastructure / PMO Manager</b></p><br><br><p><b>Role Purpose</b></p><br><br><p>Provide senior leadership for IT integration, operations readiness and technology delivery across oil and gas and wider operational environments. The role has a strong bias towards IT programme and project management, PMO governance, delivery assurance, stakeholder alignment, vendor coordination and the controlled transition of technology services into steady-state operations.</p><br><br>Role Summary<p><b>Field Description</b></p><br><br><p><b>Position Title:</b> IT Infrastructure / PMO Manager</p><br><br><p><b>Function</b>: IT / Im / Digital Delivery / Operations Support</p><br><br><p><b>Primary Focus</b>: IT programme leadership, project delivery, PMO governance, operations readiness and service integration</p><br><br><p><b>Operating Environment:</b> Oil and gas field operations, production facilities, remote sites, corporate offices and wider business operations</p><br><br><p><b>Key Technologies:</b> Enterprise IT, infrastructure, networks, cloud, field connectivity, Huawei / ZTE, CCTV, access control, SCADA-adjacent systems and digital operations platforms</p><br><br><p><b>Key Interfaces:</b> Operations, Maintenance, Engineering, HSE, Procurement, Contracts, Cyber Security, Vendors, Client teams and delivery partners</p><br><br><p><b>Role Level: Senior</b> delivery and operations leadership role with programme, project and service integration accountability</p><br><br>Professional Summary<p>Experienced IT Integration and Operations Manager with strong programme leadership, project management and PMO experience across complex oil and gas, industrial and wider business operations environments. Proven capability to lead multi-workstream technology delivery, infrastructure integration, operational readiness and service transition activities in challenging field and corporate settings.</p><br><br><p>Skilled in establishing delivery governance, programme controls, project reporting, risk and issue management, dependency tracking, vendor coordination and stakeholder engagement. Able to translate business and operational requirements into structured IT delivery plans that support field productivity, operational continuity, cyber resilience and long-term service sustainability.</p><br><br><p>Strong background in IT infrastructure, networks, cloud services, field technology integration, Chinese technology platforms such as Huawei and ZTE, CCTV and access control solutions, industrial connectivity and operations support services. Experienced in coordinating cross-functional teams and ensuring technology solutions are delivered safely, securely, on time and aligned with operational priorities.</p><br><br>Key Skills &amp; Competencies<p><b>Competency Area</b></p><br><br><p><b>Capability Requirements</b></p><br><br><p><b>Programme Leadership: IT</b> programme governance, multi-workstream delivery, executive reporting, delivery assurance and stakeholder alignment</p><br><br><p><b>PMO &amp; Project Controls: Integrated</b> planning, RAID management, dependency tracking, change control, benefits tracking, project dashboards and governance forums</p><br><br><p><b>Oil &amp; Gas Operations: Technology</b> delivery across field operations, production sites, remote locations, maintenance support and wider operational environments</p><br><br><p><b>IT Integration: Infrastructure</b>, network, cloud, end-user services, field connectivity, enterprise applications and service transition planning</p><br><br><p><b>Vendor &amp; Commercial Delivery:</b>Vendor governance, procurement support, contract coordination, service order tracking, supplier performance and delivery acceptance</p><br><br><p><b>Operational Readiness:</b>Cutover planning, mobilization, handover, support model design, service readiness and transition to operations</p><br><br><p><b>Risk &amp; Compliance:</b>Project risk management, cyber security coordination, business continuity, disaster recovery and compliance alignment</p><br><br>Key ResponsibilitiesProgramme Leadership &amp; Delivery Governance<ul><li>Lead IT programmes and strategic technology initiatives across oil and gas field operations, production facilities, corporate environments and wider business operations.</li><li>Establish programme governance, delivery cadence, reporting standards and escalation routes across multiple projects and workstreams.</li><li>Maintain integrated delivery plans covering milestones, dependencies, risks, issues, actions, decisions, resourcing and budget considerations.</li><li>Provide senior-level reporting to leadership and client stakeholders, including delivery status, critical path risks, decisions required and recovery actions.</li></ul>PMO, Project Controls &amp; Assurance<ul><li>Develop and manage PMO-type frameworks including project charters, delivery dashboards, RAID logs, action trackers, change controls, dependency registers and benefits tracking.</li><li>Ensure consistent project management discipline across infrastructure, service transition, application, cyber security and digital delivery initiatives.</li><li>Drive project assurance reviews to confirm scope, schedule, cost, quality, risk, operational readiness and stakeholder acceptance criteria.</li><li>Support governance forums, steering committees and working groups with clear agendas, minutes, decision logs and follow-up actions.</li></ul>IT Integration &amp; Operations Management<ul><li>Lead integration of IT infrastructure, networks, cloud services, end-user computing, field connectivity and operational support services into a cohesive delivery and support model.</li><li>Coordinate technology deployment across remote oilfield sites, production facilities, camps, offices, warehouses and operational support locations.</li><li>Ensure IT services are designed and transitioned into operations with appropriate support processes, service ownership, monitoring, documentation and escalation paths.</li><li>Align IT delivery with operations, maintenance, engineering, HSE and business priorities to minimize disruption and support reliable field performance.</li></ul>Oil &amp; Gas and Wider Operations Technology Delivery<ul><li>Support technology planning and delivery for field operations, production support, maintenance execution, logistics, security, camp operations and wider industrial environments.</li><li>Coordinate deployment of ruggedized field IT, communications, surveillance, access control, industrial Wi-Fi, network connectivity and operational technology-adjacent systems.</li><li>Work with operations teams to define practical requirements, manage site constraints and deliver solutions suitable for remote, high-availability and safety-critical environments.</li><li>Support operational readiness, cutover planning and handover for new facilities, brownfield enhancements and transition activities.</li></ul>Vendor, Procurement &amp; Stakeholder Management<ul><li>Manage delivery interfaces with vendors, system integrators, service providers and technology partners including Huawei, ZTE, CCTV, access control, network and cloud suppliers.</li><li>Support procurement, service order development, technical evaluation, delivery acceptance and contract performance monitoring.</li><li>Coordinate cross-functional stakeholders across IT, IM, Digital, Cyber Security, Operations, Maintenance, Engineering, Procurement and client teams.</li><li>Resolve delivery blockers through structured escalation, commercial coordination and clear ownership of actions.</li></ul>Risk, Cyber Security &amp; Business Continuity<ul><li>Ensure project delivery incorporates cyber security, data protection, resilience, backup, disaster recovery and business continuity requirements from the outset.</li><li>Maintain visibility of programme and operational risks, ensuring mitigation plans are documented, owned and progressed.</li><li>Coordinate with cyber security teams to ensure infrastructure, remote access, vendor connectivity and operational systems are reviewed and controlled.</li><li>Support incident response, recovery planning and service continuity arrangements for critical IT and operational support systems.</li></ul>Team Leadership &amp; Capability Development<ul><li>Lead cross-functional IT delivery teams, coordinators, engineers, vendors and support resources to deliver agreed programme and operational outcomes.</li><li>Coach team members in project management discipline, delivery reporting, stakeholder communication and operational support expectations.</li><li>Promote a structured delivery culture focused on accountability, transparency, measurable progress and continuous improvement.</li><li>Support local capability development and knowledge transfer through documentation, mentoring and structured handover activities.</li></ul>Education, Certifications &amp; Professional DevelopmentEducation<ul><li>Bachelor degree in Information Technology, Computer Science, Engineering, Business Systems, Project Management or equivalent relevant experience.</li></ul>Preferred Certifications<ul><li>PMP, PRINCE2 Practitioner, MSP, AgilePM, Scrum Master or equivalent programme / project management certification.</li><li>ITIL Foundation or higher, with practical service transition and IT operations experience.</li><li>Microsoft Azure, Cisco, Huawei, ZTE, cloud, infrastructure or networking certifications would be advantageous.</li><li>Cyber security, business continuity or risk management certifications would be advantageous.</li></ul>Technical Proficiencies<ul><li>Project and PMO tools: Microsoft Project, Jira, Azure DevOps, Primavera P6, Power BI, Excel dashboards and SharePoint action tracking.</li><li>Technology domains: networks, servers, cloud, end-user computing, field connectivity, CCTV, access control, industrial Wi-Fi and SCADA-adjacent infrastructure.</li><li>Vendor platforms: Cisco, Huawei, ZTE, Microsoft, VMware, Azure, AWS, Alibaba Cloud and common oilfield technology ecosystems.</li></ul>Suggested KPIs<p><b>KPI Area/ Measure /Target Intent</b></p><br><br><p>Programme Delivery</p><br><br><p>Milestones delivered against approved baseline</p><br><br><p>Improve predictability and delivery confidence</p><br><br><p>PMO Control</p><br><br><p>RAID items, actions and decisions tracked to closure</p><br><br><p>Strengthen governance and accountability</p><br><br><p>Operational Readiness</p><br><br><p>Services transitioned with approved support model and documentation</p><br><br><p>Reduce post-go-live instability</p><br><br><p>Stakeholder Management</p><br><br><p>Leadership reporting, decision papers and governance forums delivered on schedule</p><br><br><p>Improve alignment and timely decision-making</p><br><br><p>Vendor Performance</p><br><br><p>Supplier deliverables accepted against scope, quality and schedule</p><br><br><p>Increase vendor accountability and delivery assurance</p><br><br><p>Risk Reduction</p><br><br><p>High-priority delivery and operational risks mitigated</p><br><br><p>Protect service continuity and field operations</p><br><br>Languages<ul><li>English: Fluent</li><li>Arabic: Advantageous</li></ul><br><br><br> </div>

<p><h4>Job description: construction e&i lead</h4> <p>The lead construction engineer (E&I) will drive construction readiness, optimize field execution strategies, and ensure effective coordination between engineering, procurement, construction, commissioning, and operations. This position requires a seasoned professional capable of leading multidisciplinary teams and consistently achieving project safety, cost, schedule, and quality objectives.</p> <h4>Accountability / expectations</h4> <ul> <li>Enhance construction safety performance by promoting modularization, standardized assemblies, pre-fabricated E&I modules, and off-site construction to reduce field exposure.</li> <li>Develop brownfield and greenfield construction strategies, including tie-in planning, SIMOPS coordination, shutdown integration, and live-plant execution methodologies.</li> <li>Identify and resolve E&I construction challenges such as cable routing conflicts, hazardous area compliance issues, and instrument accessibility constraints.</li> <li>Monitor field productivity using discipline-specific KPIs (cable pulling rates, termination progress, loop completion curves, energization milestones).</li> <li>Lead construction planning, ensuring detailed sequencing for electrical load transfer, instrument migration, and control system cutover activities.</li> <li>Provide constructability input into electrical single-line diagrams, cable block diagrams, instrument indexes, control system architecture, and hazardous area layouts.</li> <li>Ensure design decisions align with HSE, cost, schedule, and quality requirements, validating field feasibility and installation constraints.</li> <li>Facilitate constructability reviews focused on cable routing, instrument maintainability, equipment lifting constraints, and hazardous area compliance.</li> <li>Serve as the primary E&I construction interface from project inception through field execution.</li> <li>Collaborate with construction management to develop execution plans covering power distribution, loop testing, control system migration, and cable management.</li> <li>Manage multiple concurrent E&I work fronts, ensuring resource leveling and contractor performance oversight.</li> <li>Ensure engineering and procurement deliverables (SLDs, ILDs, P&IDs, I/O lists, datasheets, cable drums, switchgear, instrument panels) align with construction sequencing and commissioning priorities.</li> <li>Prepare detailed E&I work packages including cable schedules, termination sheets, loop diagrams, installation drawings, and material take-offs.</li> <li>Review and update work package documentation, red-line markups, as-built records, and test documentation.</li> <li>Ensure compliance with IEC/NEC standards, ATEX/IECEx requirements, grounding and bonding standards, and project-specific electrical safety rules.</li> <li>Support commissioning teams in developing energization plans, loop testing protocols, instrument calibration procedures, and control system functional testing.</li> <li>Ensure construction activities integrate seamlessly with commissioning, operations, and other discipline interfaces.</li> <li>Advocate for cold-work strategies such as pre-terminated instrument cables, plug-and-play analyzer shelters, and pre-assembled marshalling cabinets.</li> <li>Align construction execution with project scope, quality, cost, and schedule targets.</li> <li>Ensure engineering and procurement deliverables meet construction and handover requirements.</li> <li>Implement work face planning to ensure crews receive fully validated work packages.</li> <li>Support interfaces with operations, ensuring safe and efficient brownfield and greenfield execution.</li> <li>Ensure final designs incorporate construction risk assessments and economic considerations.</li> </ul> <h4>Education</h4> <p>BSc. in instrumentation, electrical engineering, or a related discipline.</p> <h4>Experience requirements</h4> <ul> <li>Minimum 10+ years experience in oil & gas E&I design, construction, and commissioning.</li> <li>Strong understanding of:</li> <ul> <li>LV/MV electrical distribution</li> <li>Instrumentation installation and calibration</li> <li>Loop testing and commissioning workflows</li> </ul> <li>Proficiency in productivity measurement and resource-based planning (Level 4 scheduling).</li> <li>Proven leadership and supervisory experience in managing E&I construction teams and contractors.</li> <li>Strong organizational skills with the ability to manage multiple work fronts and shifting priorities.</li> <li>High attention to detail with a focus on quality, accuracy, and safe execution.</li> </ul></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Site M&amp;P Construction Lead (Infrastructure)<br><br><p><b>Job Description</b>: Construction M&amp;P Lead</p><br><br><p><b>Company</b>: KBR Iraq</p><br><br><p><b>Location</b>: Iraq (28/28 Rotation)</p><br><br><p><b>Nationality:</b> Any</p><br><br><br><p>The Lead Mechanical &amp; Piping Construction Lead is responsible for directing, coordinating, and technically governing all field construction activities across mechanical and piping scopes within brownfield and greenfield project environments. The role provides senior level leadership, ensures disciplined execution, drives constructability integration, and supports strategic planning across multi‑phase construction programs.</p><br><br><br><p>This position acts as the primary technical Lead for mechanical and piping construction, ensuring HSSE compliance, schedule adherence, cost efficiency, and quality compliance. The Lead manages multi‑discipline interfaces and ensures seamless integration between engineering, procurement, construction, and commissioning teams.</p><br><br><br><p><b>Accountabilities / Expectations</b></p><br><br><ul><li>Lead all mechanical and piping construction activities across multiple simultaneous work fronts, ensuring safe, efficient, and compliant execution.</li><li>Provide technical direction, coaching, and performance oversight to construction teams and contractors.</li><li>Manage daily/weekly construction planning, work‑front readiness, and resource allocation.</li><li>Ensure coordinated execution across civil, structural, electrical, instrumentation, and commissioning disciplines.</li><li>Ensure mechanical and piping designs fully incorporate constructability principles, modularization, cold‑work strategies, and HSSE risk reduction.</li><li>Lead Constructability Reviews and provide authoritative input on installation methodologies, lifting studies, access planning, and brownfield tie‑in strategies.</li><li>Validate engineering deliverables for completeness, accuracy, and alignment with construction sequencing and systemization.</li><li>Review and approve construction method statements, ITPs, JHAs, and technical procedures.</li><li>Support development and implementation of construction execution plans, resource strategies, and work‑front sequencing for all project phases.</li><li>Ensure construction activities align with Level 4 schedules, procurement milestones, fabrication readiness, and commissioning priorities.</li><li>Identify productivity constraints, evaluate root causes, and implement corrective actions to improve field performance.</li><li>Drive initiatives such as off‑plot fabrication, pre‑assembly, modular construction, and standardized installation practices.</li><li>HSSE leadership by enforcing safe systems of work and ensuring compliance with KBR and client HSSE standards.</li><li>Ensure mechanical and piping installations meet project specifications, industry codes (ASME, API, ISO), and quality requirements.</li><li>Oversee inspection, testing, and commissioning readiness including hydrotesting, flushing, leak testing, and mechanical completion.</li><li>Maintain strong communication with Construction Manager, Engineering Lead, Procurement, QA/QC, and Commissioning teams.</li><li>Ensure timely resolution of technical queries, field design changes, and construction issues through structured interface management.</li><li>Provide accurate reporting on progress, productivity, risks, and construction performance.</li><li>Identify construction risks early, develop mitigation plans, and ensure proactive management of brownfield and greenfield constraints and SIMOPS.</li><li>Promote continuous improvement through lessons learned, innovation in field execution, and adoption of best‑practice methodologies.</li></ul><br><p><b>Education</b></p><br><br><p>BSc. Degree in Mechanical Engineering, Piping Engineering, or related discipline.</p><br><br><br><p><b>Experience Requirements</b></p><br><br><p>10 + years experience in Oil &amp; Gas mechanical/piping engineering and design.</p><br><br><p>5- 10 years experience leading construction activities in multidiscipline environments, including brownfield and live‑plant conditions.</p><br><br><br><p>Demonstrated experience in:</p><br><br><ul><li>Productivity measurement and resource‑based planning</li><li>Level 4 construction scheduling</li><li>Mechanical completion, systemization, and commissioning interfaces</li><li>Managing multiple contractors and simultaneous work fronts</li><li>Technical &amp; Leadership Skills</li><li>Strong leadership and communication capabilities.</li><li>Advanced understanding of constructability, modularization, and field execution methodologies.</li><li>Proficiency in interpreting engineering drawings, isometrics, P&amp;IDs, and 3D model reviews.</li><li>Ability to lead complex brownfield and greenfield tie‑ins, shutdown scopes, and SIMOPS environments.</li><li>Strong problem solving skills with the ability to make technical decisions under pressure.</li><li>High competency in HSSE risk management and safe construction practices.</li></ul><br><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><strong>Introduction</strong></p><br><p>Established in 1951, IOM is a Related Organization of the United Nations and the leading UN agency in the field of migration. Working closely with governmental, intergovernmental and non-governmental partners, IOM promotes humane and orderly migration for the benefit of all. It saves lives and protects people on the move, drives solutions to displacement, and facilitates pathways for regular migration, while providing services and advice to governments and migrants.&nbsp;</p><br><p>IOM is committed to fostering a respectful, inclusive and supportive workplace where all employees can thrive professionally and feel valued. By creating such an environment, IOM aims to better harness the full potential of migration and strengthen its support to people on the move.</p><br><p>IOM invites candidates from diverse backgrounds to apply and provides reasonable accommodation throughout the recruitment process when required. Learn more about IOM’s workplace culture at&nbsp;IOM workplace culture | International Organization for Migration</p><br><p><strong>Project Context and Scope</strong></p><br><p>Access to finance remains one of the principal barriers to business growth and job creation in Iraq. While significant efforts have been undertaken by the Government of Iraq and the Central Bank of Iraq to increase access to financing for Micro, Small and Medium Enterprises (MSMEs), many entrepreneurs continue to face challenges related to collateral requirements, perceived credit risks, limited financial histories, high transaction costs, and restricted access to suitable financial products.</p><br><p>IOM Iraq supports livelihoods, economic recovery, and private sector development interventions aimed at fostering sustainable economic opportunities for vulnerable populations, including women, youth, returnees, internally displaced persons (IDPs), climate-affected communities, and small business owners.</p><br><p>As part of its efforts to promote financial inclusion and strengthen sustainable economic recovery, IOM intends to establish a blended finance mechanism that utilizes catalytic donor funding alongside commercial lending to enhance access to finance for underserved businesses and entrepreneurs. The blended finance approach will seek to mobilize capital, reduce lending risks, strengthen financial institutions’ engagement with target populations, and promote sustainable market development. The initiative will be developed in close coordination with the Central Bank of Iraq, partner banks, and other financial institutions to ensure alignment with national priorities, banking regulations, and sustainable financial sector development objectives.</p><br><p>To support this process, IOM seeks to recruit a qualified Blended Finance Specialist Consultant with substantial experience in banking, SME finance, financial inclusion, blended finance, and stakeholder engagement within the development and financial sectors. The consultant will work closely with IOM livelihoods teams, the Central Bank of Iraq (CBI), participating financial institutions, and other relevant stakeholders.<br>The consultant will serve in an individual capacity and shall not be considered an IOM staff member. The consultancy contract does not establish an employer-employee relationship. The consultant shall have no authority to make commitments, representations, or decisions that bind IOM.</p><br><strong>Organizational Department / Unit to which the Consultant is contributing</strong><br><br>The consultant will be operating within the Peace and Recovery unit,<br><p><br>Under the overall supervision of the Deputy Chief of Mission and the direct supervision of the Senior Programme Coordinator, in close coordination with the National Livelihood Officer</p><br><strong>The consultancy is open to international consultants and will be primarily based in Baghdad. However, field missions to the Kurdistan Region of Iraq will be required as part of the assignment.</strong><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Senior Process Safety Engineer<br><br><p><b>Job Description</b></p><br><br><p><b>Job Title: </b>Senior Process Safety Engineer<br><b>Company: </b>KBR<br><b>Location</b>: Basra Iraq<br><b>Employment Type:</b> Full-time, Contract</p><br><br><p>Rotation: 28/28</p><br><br><p>Required Nationals Any</p><br><br><br><p><b>About Company</b></p><br><br><p><i><u>"Belong, Connect, Grow, with KBR!</u></i></p><br><br><br><p><i>The KBR team delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</i></p><br><br><br><p><i>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets."</i></p><br><br><br><p><b>Job Purpose</b></p><br><br><br><p>Shaping risk management by developing guidelines and leading/participating in safety studies, safety reviews, implementing PSM/HSSE Management, also acting as a consultant for commercial teams and other business partners in the early stages of project development &amp; MOC detailed Risk assessment</p><br><br><br><p><b>Job Responsibilities</b></p><br><br><br><ul><li><span>Provide technical leadership, advice and support in the implementation of Safety Management Systems.</span></li><li><span>Provide HSEQ input in the Risk and Safety studies performed (e.g. HAZOP, HAZID), participate in internal audits, conducts independent safety tours; and support safety improvements, including Root Cause Analysis (RCA) and procedure development, with a particular focus on process safety.</span></li><li><span>Improve process safety awareness across the organization, particularly among engineers and project leaders, through continuous improvement initiatives, Management of Change (MOC), and joint site inspections.</span></li><li><span>Facilitate and participate in P&amp;ID reviews, HEMP, HAZID, HAZOP, SIL, layout safety reviews, PSSR, 3D model reviews, safety audits, QRA workshops, and other relevant process and technical safety studies.</span></li><li><span>Deliver training and actively communicate Process Safety Management (PSM) requirements and related matters to the organization and relevant stakeholders.</span></li><li><span>Coordinate and oversee process safety engineering activities to ensure technical objectives are achieved during new projects, MOCs, and technical studies.</span></li><li><span>Review technical bid submissions and conduct technical bid evaluations and analyses. </span></li><li><span>Participate in EPC contractor and vendor pre-qualification, bid evaluation, and performance evaluation.</span></li><li><span>Ensure the quality and accuracy of EPC contractors' process safety engineering activities and review associated deliverables, including philosophies, layouts, detailed drawings, close-out reports, risk studies, and process safety system documentation.</span></li><li><span>Participate in the commissioning, start-up, and performance testing of new projects, verifying the availability and functionality of Process and Technical Safety Systems.</span></li><li><span>Develop Process Safety Management procedures, monitor their implementation, and evaluate their effectiveness.</span></li><li><span>Develop Technical Supply Specifications, Technical Design Guidelines, and Basis for Design documentation for large-scale MOCs.</span></li><li><span>Support HSE, Process Safety, and Asset Integrity audits and coordinate the planning and implementation of resulting corrective actions.</span></li><li><span>Participate in Process Incidents Investigations.</span></li><li><span>Provide Process and Process Safety technical expertise in Flow Assurance, Hydraulic Calculations, Blowdown Verification, Surge Analysis &amp; Equipment Sizing.</span></li></ul><br><p><b>Technical Qualification &amp; Skills</b></p><br><br><ul><li><span>Minimum Bachelor's degree in Chemical Engineering.</span></li><li><span>15+ of engineering experience in the Oil and Gas industry.</span></li><li><span>10+ years of Process Safety engineering experience or equivalent in the Oil and Gas industry.</span></li><li><span>Experience with Brownfield / Revamp projects.</span></li><li><span>Practical knowledge and experience in HAZOP, LOPA, MOC, Physical Effects Modelling, and Facility Siting.</span></li><li><span>Good knowledge of CCPS/EI Process Safety Management and Risk-Based Process (RBPS) guidelines.</span></li><li><span>PH &amp; RA certifications.</span></li><li><span>Strong knowledge of process safety regulations, standards, and industry practices, including OSHA PSM, EPA RMP, and NFPA requirements</span></li></ul><br><p><b>Soft skills</b></p><br><br><ul><li><span>Excellent analytical, problem-solving, and management skills.</span></li><li><span>Strong communication and interpersonal skills.</span></li><li><span>Ability to work independently and as part of a team.</span></li><li><span>Proficiency in Microsoft Office applications, including Excel, Word, PowerPoint and Outlook.</span></li><li><span>English - upper intermediate proficiency (both verbal &amp; written)</span></li></ul><br><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br>Company Description<br><br><p><strong>Why work for Accor?</strong></p><br><p>We are far more than a worldwide leader. We welcome you as you are and you can find a job and brand that matches your personality. We support you to grow and learn every day, making sure that work brings purpose to your life, so that during your journey with us, you can continue to explore Accor’s limitless possibilities.</p><br><p><br>By joining Accor, every chapter of your story is yours to write and together we can imagine tomorrow's hospitality. Discover the life that awaits you at Accor, visit&nbsp;&nbsp;https://careers.accor.com/</p><br><p>Do what you love, care for the world, dare to challenge the status quo!&nbsp;<strong>#BELIMITLESS</strong></p><br><br>Job Description<br><br><p>We are seeking a professional and customer-focused Waiter/Waitress to join our dynamic hospitality team in Baghdad, Iraq. In this role, you will be the face of our establishment, delivering exceptional service and creating memorable dining experiences for our guests. Your enthusiasm, attention to detail, and collaborative spirit will be essential as you work to exceed guest expectations in a fast-paced environment.</p><br><ul><li>Greet guests warmly upon arrival and seat them in a timely and organized manner</li><li>Present menus and provide knowledgeable recommendations about food and beverage offerings</li><li>Take accurate food and beverage orders while demonstrating attentiveness to guest preferences and dietary requirements</li><li>Communicate orders clearly to kitchen and bar staff to ensure efficient service delivery</li><li>Serve food and beverages with professionalism, ensuring proper presentation and temperature standards</li><li>Monitor guest satisfaction throughout their dining experience and respond empathetically to any concerns or special requests</li><li>Process payments accurately using point of sale systems and handle cash transactions with integrity</li><li>Clear and reset tables promptly while maintaining cleanliness and organization of the dining area</li><li>Collaborate with team members to support smooth operations and assist colleagues during peak service times</li><li>Maintain knowledge of menu items, ingredients, and preparation methods to answer guest questions confidently</li><li>Follow all health, safety, and sanitation protocols to ensure a secure dining environment</li><li>Demonstrate flexibility and resilience in adapting to changing priorities and guest needs</li></ul><br>Qualifications<br><br><ul><li>Previous customer service or food and beverage service experience (preferred)</li><li>Fluency in English; additional language skills are a plus</li><li>Strong interpersonal and communication skills with the ability to build rapport quickly</li><li>Exceptional attention to detail and organizational abilities</li><li>Physical stamina and ability to multitask in a fast-paced environment</li><li>Reliable, punctual, and committed to maintaining professional standards</li><li>Ability to work collaboratively as part of a diverse team</li><li>Cash handling experience and basic mathematical skills</li><li>Welcoming, upbeat personality with a genuine passion for delivering outstanding guest service</li><li>Ability to remain calm, composed, and solution-focused under pressure</li></ul> </div>

<p>SEED is seeking a dynamic, strategic, and experienced professional to serve as the Manager of the Community Development and Service Delivery Department. This role ensures effective integration and coordination of holistic, rights-based, and community-driven programming that meets the diverse needs of vulnerable populations. The ideal candidate will provide vision and leadership that foster a culture of excellence and collaboration, and strong and empowering management of the portfolio and staff to effectively implement the department's goals and activities. The Manager will be responsible for managing the department s main functions:</p><ul><li>Oversee the design and delivery of quality community-based group interventions that build resiliency, strengthen awareness, and support social and behavioral change.</li><li>Oversee the delivery of quality, comprehensive service delivery to individuals and families including case management, legal, mental health and psychosocial support (MHPSS) services including gender-based violence (GBV) and human trafficking prevention and response.</li><li>Oversee the operation of SEED s service delivery centers and shelter for trafficking survivors.</li></ul><p>This is a senior leadership position that requires a deep understanding of MHPSS and protection needs and services, community-based programming to strengthen resiliency, awareness of rights, gender equality, child protection, and social cohesion with an emphasis of improving knowledge, skills, beliefs, attitudes, and behaviors. The successful candidate will be a passionate advocate for transformative, locally-driven change and will bring significant experience in empowering communities through inclusive, participatory approaches. The Department Manager will supervise other managers and technical staff. This position is based in Erbil with frequent travel throughout Kurdistan. The Department Manager will directly report to the President.</p><p><strong>Specific Tasks:</strong></p><p><strong>Strategic Leadership, Management, and Planning (60%):</strong></p><ul><li>Lead the development and implementation of departmental strategies aligned with organizational goals.</li><li>Provide strategic guidance on program design and scaling of MHPSS, GBV, and community development initiatives.</li><li>Identify emerging needs, trends, and best practices to inform innovation and program improvement.</li><li>Set priorities and oversee the development and implementation of technical guidelines, standard operating procedures (SOPs), and safeguarding protocols.</li><li>Set project direction by prioritizing and organizing actions &amp; resources to achieve objectives.</li><li>Provide input into program development</li><li>Identify and manage risks associated with program delivery and partnerships.</li><li>Lead and manage a multidisciplinary team; provide mentorship, supervision, and professional development support.</li><li>Foster a culture of accountability, learning, and collaboration within the service delivery and community development teams.</li><li>Support recruitment, onboarding, and performance management processes for staff.</li><li>Supervise service delivery and community development managers and coordinators, technical advisors, and their teams, and ensure roles, responsibilities and reporting lines are clear for each staff member at all times.</li><li>Build systems and structures for managing department activities, in all locations, under all programs, ensure sufficient coordination between PSDMs, technical advisors, program managers, and other departments.</li><li>Ensure timely and quality reporting to donors, partners, and internal leadership.</li></ul><p><strong>Technical Leadership (30%):</strong></p><ul><li>Ensure technical quality, coherence, and impact of services and community interventions.</li><li>Lead the design and implementation of evidence-based social and behavioral change strategies to promote positive behaviors through group community based interventions.</li><li>Oversee the development and dissemination of technical resources, including group curricula, training manuals, facilitator guides, and standardized tools for PSS and community development interventions.</li><li>Review and as needed, develop policies, guidances, and protocols</li><li>Ensure that all activities are implemented in accordance with donor requirements, organizational policies, and international standards and practices.</li><li>Coordinate closely with the MEAL Unit to ensure all MHPSS and protection service delivery activities are properly monitored, documented, evaluated, and reported on, and contribute to reporting.</li><li>Contribute to learning and knowledge management by promoting documentation of best practices, lessons learned, and success stories.</li><li>Support program M&amp;E, including development of tools, to ensure that M&amp;E systems provide adequate feedback on MHPSS and protection interventions.</li><li>Ensure that all MEAL findings about service delivery and community development are addressed, and that services and processes are adapted to address any gaps.</li><li>Ensure all efforts are being made to be fully accountable to our clients and all accountability and safeguarding mechanisms are in place and followed up.</li></ul><p><strong>Coordination and Organizational Representation (10%)</strong></p><ul><li>Represent the organization in local and high-level coordination forums, donor meetings, and partnerships related to MHPSS, GBV, and community development.</li><li>Build and maintain strategic partnerships with government agencies, UN bodies, NGOs, and community stakeholders.</li><li>Advocate for inclusive, survivor-centered, and community-based approaches in policy and program discussions.</li><li>Identify and manage strategic partnerships with local and international organizations, and key government interlocutors, including any sub-grantees delivering services.</li></ul><p><strong>Key values:</strong></p><ul><li>Serve as a positive role model and SEED ambassador at all times.</li><li>Treat all people with respect regardless of age, gender, religion, nationality, sexual orientation, disability status, marital status and ethnicity.</li><li>Working collaboratively with all colleagues, and maintaining a positive, cooperative attitude.</li></ul><p><br></p><p><strong>Desired Candidate Profile</strong></p><ul><li>Master's degree in Psychology, Social Work, Gender Studies, International Development, Public Health or related field.</li><li>Minimum of 8-10 years of experience in managing teams and building staff capacity through training, coaching, and supervision.</li><li>Minimum of 8-10 years of relevant experience in protection and MHPSS service delivery, psychosocial support group interventions, community development and engagement, GBV prevention, social behavioral change, and peacebuilding in humanitarian or development settings.</li><li>Strong technical knowledge of gender equality, women and girls empowerment, GBV prevention, and social norm change with experience designing or leading awareness and social behavioral change initiatives.</li><li>Strong knowledge of social change theories and approaches</li><li>Experience in developing culturally sensitive messages and materials.</li><li>Demonstrated leadership, strategic planning, and staff management skills.</li><li>Excellent communication and interpersonal skills, including experience with diverse communities.</li><li>Experience in program design and development, program implementation, MEAL, and reporting.</li><li>Experience in resource management and program/activity planning.</li><li>Experience in development and humanitarian settings a must; experience in the Middle East, Iraq, or Kurdistan, a plus.</li><li>Strong belief in human rights and gender equality.</li><li>Ability to work in a stressful setting and adapt quickly to changing environments.</li><li>Strong ability to work independently.</li><li>Experience working with vulnerable populations, especially in the Middle East, is highly desirable.</li><li>Excellent English required; proficiency in Kurdish and/or Arabic a plus.</li><li>Good computer skills, experience with Google Drive</li><li>Committed to SEED s mission, values, and ethical standards.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><u><b>Job Summary</b></u> <br></span><p>Responsible for ensuring that high quality patient care is given and that there is economical and efficient performance. They will lead and demonstrate the provision of safe patient and family focused quality care. Responsible for management of assigned Outpatient Clinics. They will assess, plan, direct, implement, and evaluate patient care to comply with established standards in accordance with MoPH and Joint Commission International Accreditation (JCIA).</p><br> <br><br><u><b>Job Responsibilities 1</b></u> <br><p>Responsible for the efficient management of consulting rooms and other outpatient areas, the maintenance and monitoring of agreed service standards, and the handling of all issues and complaints arising, in coordination with Nursing Manager – Outpatient Clinics.&nbsp;</p><br> <p>Strives for excellence in the OPD department and promotes team working and interdisciplinary relationships.&nbsp;</p><br> <p>Responsible for the patient management system, including implementing changes and training all relevant users, in coordination with Nursing Manager – Outpatient Clinics.&nbsp;</p><br> <p>Ensures that Nursing, Allied Health and support teams work flexibly and supportively together and that the objectives for the Outpatient Clinics Care are delivered.&nbsp;</p><br> <p>Evaluates patient acuity, develops, and reviews criteria for work assignment and delivery care model. </p><br> <p>Works closely with the Allied Health staff and those in support functions to ensure a seamless personalized service for all patients.&nbsp;</p><br> <p>Takes an innovative approach to the development of services, maximizing the use of digitalization to deliver excellent customer service.&nbsp;</p><br> <p>Ensures that there is planned, and effective day-to-day skill mix and staff management. </p><br> <p>Determines and reviews staffing plans and develops a scheduling system for unit and reviews regularly as staffing, skills mix, and acuity change.&nbsp;</p><br> <p>Acts as an expert resource for others requiring knowledge, experience, advice, and support within the multi-professional Allied Health team.&nbsp;</p><br> <br><br><u><b>Job Responsibilities 2</b></u> <br><p>Performs or monitors personnel management functions, which includes interviewing and selecting candidates, directing the performance management program, and managing corrective action issues. </p><br> <p>Demonstrates growth and development in clinical and management skills through an ongoing process of education, consultation, and pertinent literature.&nbsp;</p><br> <p>Demonstrates research-based nursing practice in caring for patients in related specialties.&nbsp;</p><br> <p>Ensures effective channels of communication exist between the staff, the patients, and their relatives (and/or significant others) in order that they are always fully informed.&nbsp;</p><br> <p>Acts as a change agent, supporting staff in the implementation of new practices.&nbsp;</p><br> <p>Supports risk management activities.&nbsp;</p><br> <p>Contributes to the development and execution of the department’s short to mid-term plans to ensure alignment with the division’s strategic priorities and contribute to the development of annual business plans for the assigned areas of responsibility to support the achievement of financial objectives.&nbsp;</p><br> <p>Monitors, controls, and reports key performance indicators related to the OPD department to track performance and recommend corrective actions.&nbsp;</p><br> <br><br><b>Additional Responsibilities 3</b> <br><br><u><b>Job Knowledge &amp; Skills</b></u> <br><p>Previous Commissioning of Outpatient Clinics is highly desirable.&nbsp;</p><br> <p>Comprehensive knowledge of Accreditation Process in Healthcare Facility with particular emphasis on JCI.&nbsp;</p><br> <p>Thorough knowledge of the Ministry of Health’s regulations, laws, and utilization review committee planning, organization, and management.&nbsp;</p><br> <p>Knowledge of medical staff bylaws, rules, and regulations, and the state peer review statute.&nbsp;</p><br> <p>Strong understanding of clinical research trials related to medical practice, clinical decision-making, healthcare systems, reimbursement, and other aspects impacting patient care.&nbsp;</p><br> <p>Excellent organizational skills.&nbsp;</p><br> <p>Excellent communication skills, using the spoken word, writing clearly and concisely, and presenting information publicly.&nbsp;</p><br> <p>Excellent Knowledge of reporting &amp; analyzing outcomes, KPIs.&nbsp;</p><br> <p>Strong knowledge in Branding thru a competitive Market</p><br> <br><br><u><b>Job Experience</b></u> <br><p>Minimum 10 years of experience in Health Science (required).&nbsp;</p><br> <p>5 years managerial experience.</p><br> <p>Minimum 3 years of experience in GCC (preferred).&nbsp;</p><br> <br><br><u><b>Competencies</b></u> <br>Agility<br>Build High-Performing Teams<br>Quality Assurance and Performance Improvement L4<br>Provide Direction<br>Clinical Operations and Processes L4<br>Regulatory Compliance L4<br>Patient-Centered Care L4<br>Healthcare Operations Management L4<br>AI Fluency<br>Leadership<br>Quality<br>Resilience<br><br><br><u><b>Education</b></u> <br>Bachelor's Degree in Science or any related field<br>Master's degree in Science or any related field<br><br><br><br> </div>

<p><h4>Preface</h4> <p>We are seeking an experienced SAP Operations Manager to lead a small SAP team at the Majnoon Oil Field and ensure reliable, controlled, and business-aligned SAP operations. The role is critical to maintaining operational continuity across procurement, inventory, maintenance, finance, compliance, reporting, and wider field execution activities.</p> <p>SAP is a core business platform for Majnoon. It enables structured procurement, material availability, maintenance execution, financial control, approvals, compliance visibility, and management reporting. The SAP Operations Manager will ensure that SAP remains stable, usable, properly governed, and aligned with practical oil and gas workflows.</p> <h4>Professional summary</h4> <p>The ideal candidate will have more than 10 years of SAP experience, strong site-facing operational discipline, and proven ability to lead a compact support team in a complex industrial environment. The individual must be able to manage incidents, prioritize business-critical issues, coordinate with corporate SAP and vendor teams, improve user adoption, and maintain strong governance over access, licensing, data quality, and process compliance.</p> <h4>Core competencies</h4> <ul> <li>SAP operations leadership across SAP ECC and/or S/4HANA environments.</li> <li>Strong practical understanding of SAP MM, SAP PM, and SAP FI/CO processes.</li> <li>Oil and gas field process understanding, including maintenance, procurement, materials, cost control, approval of workflows, and operational reporting.</li> <li>Team leadership, work prioritization, coaching, knowledge transfer, and performance management.</li> <li>Incident, problem, change, access, licence, and escalation management within an ITIL-aligned support model.</li> <li>Data integrity, master data governance, compliance with evidence, and audit readiness.</li> <li>Clear communication with operations, maintenance, procurement, finance, compliance, IT, vendors, and client stakeholders.</li> </ul> <h4>Key responsibilities</h4> <ul> <li>Manage day-to-day SAP operations for site-based oil and gas activities, ensuring system availability, stable support, and timely issue resolution.</li> <li>Lead the SAP team, allocate work, manage priorities, monitor performance, coach team members, and ensure appropriate support coverage.</li> <li>Act as the primary site interface between SAP users, IM/IT leadership, corporate SAP support, vendors, and business process owners.</li> <li>Ensure SAP issues are logged, prioritized, investigated, escalated, and closed in line with agreed service levels and operational impact.</li> <li>Support SAP user access management, role changes, approval evidence, licence oversight, and segregation of duties considerations.</li> <li>Coordinate SAP process alignment with field workflows, reducing workarounds, duplicate data entry, manual reconciliation, and recurring user errors.</li> <li>Support onboarding and training for new SAP users, approvers, planners, warehouse teams, finance users, and operational stakeholders.</li> <li>Prepare concise leadership reporting covering SAP performance, critical issues, blockers, risks, recurring problems, and improvement actions.</li> <li>Maintain and improve SAP operational procedures, support guides, escalation routes, user instructions, and knowledge transfer materials.</li> <li>Support integration of SAP with relevant site systems, reporting tools, interfaces, and third-party applications where required.</li> </ul> <h4>SAP module and process coverage</h4> <p><strong>Confirmed core module focus</strong></p> <p>The current SAP Operations Manager role profile references SAP ECC / S/4HANA operations and the core modules SAP MM, SAP PM, and SAP FI/CO. These are therefore treated as the core module requirements for enhanced specification.</p> <p><strong>SAP MM - Materials Management</strong><br> Procurement, purchase requisitions, purchase orders, goods receipt, vendor coordination, inventory visibility, warehouse support, and material master data.<br> Operational relevance: supports spares availability, field procurement, stock control, materials traceability, and avoidance of operational delays.</p> <p><strong>SAP PM - Plant Maintenance</strong><br> Maintenance notifications, work orders, equipment structures, functional locations, asset history, maintenance planning, and execution support.<br> Operational relevance: supports asset reliability, corrective maintenance, planned maintenance, equipment availability, and operational continuity.</p> <p><strong>SAP FI/CO - Finance and Controlling</strong><br> Cost centers, internal orders, financial postings, cost capture, approvals, cost reporting, and compliance with finance and control requirements.<br> Operational relevance: enables transparent cost control, expenditure governance, budget alignment, and reliable financial reporting for operations.</p> <p><strong>Related SAP and integration areas - where applicable</strong></p> <ul> <li>SAP PS or project controls integration for WBS structures, commitments, project cost visibility, and finance/procurement alignment.</li> <li>SAP HCM, time-writing, or workforce charging interfaces where locally used for labour capture, working time approval, or cost recovery.</li> <li>SAP Basis, security, authorization, licensing, transport, monitoring, and technical escalation coordination.</li> <li>SAP reporting, data extracts, interfaces, dashboards, and integration points used to improve operational visibility and reduce manual reconciliation.</li> </ul> <h4>Required experience</h4> <ul> <li>Minimum 10 years of SAP experience, including operational support, functional support, SAP service delivery, or SAP team leadership responsibility.</li> <li>Experience supporting SAP in oil and gas, energy, engineering, construction, utilities, industrial operations, or comparable large-scale operational environments.</li> <li>Proven leadership of small technical or functional teams, including workload planning, performance monitoring, coaching, and service prioritization.</li> <li>Strong experience with SAP incident management, problem management, access support, change coordination, escalation management, and service reporting.</li> <li>Ability to convert user issues and operational pain points into clear SAP support actions, escalation packs, process improvements, or training interventions.</li> <li>Experience working with Finance, Procurement, Supply Chain, Warehouse, Maintenance, Operations, Project Controls, HR/time-writing, Compliance, and IT stakeholders.</li> </ul> <h4>Technical skills</h4> <ul> <li>SAP ECC and/or SAP S/4HANA operations experience.</li> <li>Working knowledge of SAP MM, PM, and FI/CO modules and their operational dependencies.</li> <li>Awareness of SAP Basis, authorizations, roles, user access, licence administration, interfaces, monitoring, and transport coordination.</li> <li>Understanding of SAP HANA and/or Oracle database concepts, performance monitoring, reporting extracts, and basic troubleshooting.</li> <li>General IT infrastructure, endpoint, network, and service management awareness sufficient to coordinate cross-IT issue resolution.</li> <li>Strong MS Office and reporting capability, including issue trackers, service dashboards, action logs, operational reports, and leadership summaries.</li> </ul> <h4>Certifications</h4> <ul> <li>SAP Certified Application Associate in a relevant module such as MM, PM, FI/CO, S/4HANA, or SAP business process integration preferred.</li> <li>ITIL Foundation or equivalent service management certification advantageous.</li> <li>Oil and gas safety, site induction, or industrial operations safety training preferred.</li> <li>Project management or team leadership certification is advantageous where the candidate has broader service improvement responsibilities.</li> </ul> <h4>Languages</h4> <ul> <li>English: fluent business and technical communication required.</li> <li>Arabic: native or fluent capability preferred.</li> <li>Chinese: advantageous.</li> </ul> <h4>KPIs and success measures</h4> <ul> <li>Maintain SAP system availability in line with agreed operational service levels, with target uptime of 99.9 percent where technically achievable.</li> <li>Ensure critical SAP incidents are acknowledged, prioritized, escalated, and progressed within agreed SLA targets.</li> <li>Maintain controlled user access, approval evidence, licence oversight, and compliance readiness.</li> <li>Deliver monthly SAP operations reporting covering performance, risks, blockers, open actions, recurring issues, and improvement progress.</li> <li>Improve SAP team capability through documented procedures, coaching, cross-training, and knowledge transfer.</li> <li>Reduce repeat issues, avoidable workarounds, data quality defects, and manual reconciliation activities through targeted improvement actions.</li> </ul> <h4>Reporting structure</h4> <ul> <li>Reports directly to the Site IT Manager / IM & IT leadership.</li> <li>Works closely with Operations and Maintenance stakeholders to ensure SAP supports practical field execution requirements.</li> <li>Coordinates with Corporate SAP functional and technical teams for escalations, enhancements, access issues, system updates, and specialist support.</li> <li>Collaborates with Finance, Procurement, Supply Chain, Compliance, Project Controls, HR/time-writing, vendors, and external support providers as required.</li> </ul> <h4>Preferred candidate profile</h4> <p>The preferred candidate will combine SAP functional awareness, disciplined service management, and practical oilfield delivery experience. They should be comfortable working directly with users, challenging poor data or weak process discipline, supporting operational priorities, and communicating clearly with leadership. The candidate should be capable of stabilizing daily SAP operations while strengthening local capability, improving documentation, and reducing dependency on informal support arrangements.</p></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Site E&amp;I Supervisor-(Oil, Gas &amp; Water)<br><br><p><b>Job Description:</b> Construction E&amp;I Supervisor&nbsp;</p><br><br><p><b>Company:</b> KBR</p><br><br><p><b>Location:</b> Iraq (28/28 Rotational Assignment)</p><br><br><p><b>Nationality:</b> Iraqi Nationals Preferred</p><br><br><br><p>The E&amp;I Construction Supervisor supports the Construction E&amp;I Lead in delivering safe, efficient, and high‑quality field execution. The role focuses on supervising daily electrical and instrumentation construction activities, ensuring compliance with project requirements, and coordinating closely with contractors, engineering, and commissioning teams. This position requires solid technical experience, strong field supervision capability, and disciplined execution of work packages under the direction of the Lead.</p><br><br><br><p><b>Accountability / Expectations</b></p><br><br><ul><li>Promote safe work practices and ensure crews follow all electrical and instrumentation safety rules, permit requirements, and site procedures.</li><li>Execute construction activities in accordance with approved drawings, work packages, and instructions provided by the Construction E&amp;I Lead.</li><li>Supervise contractor teams performing cable pulling, termination, installation of instruments, panels, junction boxes, and electrical equipment.</li><li>Identify field issues such as routing clashes, accessibility concerns, and installation constraints, escalating them to the Lead for resolution.</li><li>Track daily progress (cable pulling, terminations, loop completion) and report deviations or delays to the Lead.</li><li>Support construction sequencing for electrical load transfer, instrument migration, and control system cutover as directed.</li><li>Provide field input during constructability reviews, focusing on practical installation concerns, hazardous area compliance, and maintainability.</li><li>Coordinate with other disciplines to ensure safe SIMOPS execution, proper tie‑in preparation, and efficient brownfield/greenfield work.</li><li>Ensure engineering and procurement deliverables received at site (SLDs, ILDs, P&amp;IDs, I/O lists, datasheets, cable drums, panels) are verified and ready for installation.</li><li>Prepare and verify work package components such as cable schedules, termination sheets, loop diagrams, and material take‑offs under guidance from the Lead.</li><li>Maintain accurate red‑line markups, as‑built updates, and test documentation for handover.</li><li>Ensure installation complies with standards, requirements, grounding/bonding rules, and project specifications.</li><li>Support commissioning teams with loop testing, instrument calibration, energization preparation, and functional testing activities.</li><li>Monitor contractor performance, manpower allocation, and work‑front readiness, escalating resource gaps or performance issues.</li><li>Implement Work Face Planning by ensuring crews receive validated work packages and required materials.</li><li>Support coordination with operations for safe execution in live plant areas.</li><li>Apply cold‑work strategies such as pre‑terminated cables, pre‑assembled cabinets, and modular assemblies when instructed by the Lead.</li><li>Ensure construction execution aligns with project quality, schedule, and scope expectations.</li></ul><br><p><b>Education</b></p><br><br><p>BSc. in Instrumentation, Electrical Engineering, or related discipline.</p><br><br><br><p><b>Experience Requirements</b></p><br><br><p>Minimum 5–10 years experience in Oil &amp; Gas E&amp;I construction.</p><br><br><br><p>Strong understanding of:</p><br><br><ul><li>LV/MV electrical distribution</li><li>Instrument installation and calibration</li><li>Loop testing and commissioning workflows</li><li>Experience supervising E&amp;I construction crews and contractors.</li><li>Ability to manage multiple work fronts under direction from the Lead.</li><li>High attention to detail, quality, and safe execution.</li></ul><br><br><br><br> </div>

<p>Introduction Established in 1951, IOM is a Related Organization of the United Nations and the leading UN agency in the field of migration. Working closely with governmental, intergovernmental and non-governmental partners, IOM promotes humane and orderly migration for the benefit of all. It saves lives and protects people on the move, drives solutions to displacement, and facilitates pathways for regular migration, while providing services and advice to governments and migrants. IOM is committed to fostering a respectful, inclusive and supportive workplace where all employees can thrive professionally and feel valued. By creating such an environment, IOM aims to better harness the full potential of migration and strengthen its support to people on the move. IOM invites candidates from diverse backgrounds to apply and provides reasonable accommodation throughout the recruitment process when required. Learn more about IOM s workplace culture at IOM workplace culture | International Organization for Migration Applications are welcome from internal and external candidates. For all IOM vacancies, applications from qualified and eligible first-tier candidates are considered before those of qualified and eligible second-tier candidates in the selection process. For the purpose of this vacancy, internal and internal-equivalent candidates are considered as first-tier candidates.</p><p>Organizational Context and Scope Under the general guidance of the Head of the Returns and Recovery Unit, overall supervision of the DTM Coordinator and direct supervision of the National Database Officer in Erbil, the Database and web developer will be responsible and accountable for the following duties</p><p>Manage/monitor the DTM website and maintain optimal website performance. Develop and design new content for the DTM website. Develop, design, test, and deploy submission viewer web portal. Manage DTM website, submission viewer web portal code on Microsoft Azure Repos. Analyse, model, visualize, and publish data using data visualization frameworks (such as Highcharts). Creating dashboards and interactive reports using BI platforms (such as Tableau, Microsoft Power BI). Create and develop tables, views, functions, SQL queries and stored procedures to retrieve and manipulate information for reporting and data process purposes. Support the quality control and data retrieval mechanisms. Support the gathering, management, storing and sharing of data, and support the development of data collection tool (ODK). Develop new or revise existing web-based tools/systems as requested by the different teams; Establish and guide the website s technical architecture. Assist with IOM ICT data standards compliance and best practices to facilitate integration between systems and platforms. Perform proper backup, restore, data validation, and security procedures of source code of the new DTM website to ensure data integrity and availability. Ensure that all data collection, storage, analysis, dissemination and data of online applications is in line with IOM s data protection principles. Stay up to date with new trends and advancements in web development. Perform such other duties as maybe required.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor s degree in Information Management, Computer Science, or related fields from an accredited academic institution with five years of relevant professional experience.</li><li>Completed High School degree from accredited academic institution with seven years relevant professional experience.</li><li>Accredited Universities are those listed in the UNESCO World Higher Education Database.</li><li>At least 3 years of experience using some or all of the following tools: Excel, Microsoft Visual Studio (ASP .NET C#), ASP.Net MVC framework, and MySQL, SQL server.</li><li>Experience with using Git and Microsoft Azure Repos.</li><li>Experience with using Tableau, PowerBI, Highcharts, and InDesign is an advantage.</li><li>Experience in Information Management, management and coordination of information flows, data management including collection, storing, processing, and analyzing data to generate information products.</li><li>Experience in managing data entry and maintenance.</li><li>Ability to work independently or with minimal supervision.</li><li>Substantial knowledge of non-profit work including data collection and data analysis in post-conflict settings.</li><li>Knowledge of Durable Solutions Principles, international standards and Frameworks, Guiding Principles on Internal Displacement.</li><li>Technical understanding of core protection concepts, prevention, and response strategies.</li><li>Proven experience of research and assessments on displacement and durable solutions and ability to summarize and explain complex information to other.</li><li>Excellent analytical, proficiency with computers, especially MS Office and analytics software, mastery of certain programming languages may be required writing and presentation skills.</li><li>Ability to recognize patterns and trends in large data sets and use numerical information to develop business strategies.</li><li>Excellent communication, writing, and presentation skills.</li><li>Fluency in English is required Arabic and Kurdish are advantage</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Site E&amp;I Construction lead-(Oil, Gas &amp; Water)<br><br><p><b>Job Description</b>: Construction E&amp;I Lead</p><br><br><p>Company: KBR</p><br><br><p>Location: Iraq (28/28 Rotational Assignment)</p><br><br><p>Nationality: Any</p><br><br><br><p>The Lead Construction Engineer (E&amp;I) will drive construction readiness, optimize field execution strategies, and ensure effective coordination between engineering, procurement, construction, commissioning, and operations. This position requires a seasoned professional capable of leading multidisciplinary teams and consistently achieving project safety, cost, schedule, and quality objectives</p><br><br><br><p><b>Accountability/ Expectations</b></p><br><br><ul><li>Enhance construction safety performance by promoting modularization, standardized assemblies, pre‑fabricated E&amp;I modules, and off‑site construction to reduce field exposure.</li><li>Develop brownfield and greenfield construction strategies, including tie‑in planning, SIMOPS coordination, shutdown integration, and live‑plant execution methodologies.</li><li>Identify and resolve E&amp;I construction challenges such as cable routing conflicts, hazardous area compliance issues, and instrument accessibility constraints.</li><li>Monitor field productivity using discipline-specific KPIs (cable pulling rates, termination progress, loop completion curves, energization milestones).</li><li>Lead construction planning, ensuring detailed sequencing for electrical load transfer, instrument migration, and control system cutover activities.</li><li>Provide constructability input into electrical single-line diagrams, cable block diagrams, instrument indexes, control system architecture, and hazardous area layouts.</li><li>Ensure design decisions align with HSE, cost, schedule, and quality requirements, validating field feasibility and installation constraints.</li><li>Facilitate Constructability Reviews focused on cable routing, instrument maintainability, equipment lifting constraints, and hazardous area compliance.</li><li>Serve as the primary E&amp;I construction interface from project inception through field execution.</li><li>Collaborate with Construction Management to develop execution plans covering power distribution, loop testing, control system migration, and cable management.</li><li>Manage multiple concurrent E&amp;I work fronts, ensuring resource leveling and contractor performance oversight.</li><li>Ensure engineering and procurement deliverables (SLDs, ILDs, P&amp;IDs, I/O lists, datasheets, cable drums, switchgear, instrument panels) align with construction sequencing and commissioning priorities.</li><li>Prepare detailed E&amp;I work packages including cable schedules, termination sheets, loop diagrams, installation drawings, and material take-offs.</li><li>Review and update work package documentation, red-line markups, as-built records, and test documentation.</li><li>Ensure compliance with IEC/NEC standards, ATEX/IECEx requirements, grounding and bonding standards, and project-specific electrical safety rules.</li><li>Support commissioning teams in developing energization plans, loop testing protocols, instrument calibration procedures, and control system functional testing.</li><li>Ensure construction activities integrate seamlessly with commissioning, operations, and other discipline interfaces.</li><li>Advocate for cold-work strategies such as pre-terminated instrument cables, plug-and-play analyzer shelters, and pre-assembled marshalling cabinets.</li><li>Align construction execution with project scope, quality, cost, and schedule targets.</li><li>Ensure engineering and procurement deliverables meet construction and handover requirements.</li><li>Implement Work Face Planning to ensure crews receive fully validated work packages.</li><li>Support interfaces with operations, ensuring safe and efficient brownfield and greenfield execution.</li><li>Ensure final designs incorporate construction risk assessments and economic considerations.</li></ul><br><p><b>Education</b></p><br><br><p>BSc. in Instrumentation, Electrical Engineering, or a related discipline.</p><br><br><br><p><b>Experience Requirements</b></p><br><br><p>Minimum 10 + years experience in Oil &amp; Gas E&amp;I design, construction, and commissioning.</p><br><br><br><p>Strong understanding of:</p><br><br><ul><li>LV/MV electrical distribution</li><li>Instrumentation installation and calibration</li><li>Loop testing and commissioning workflows</li><li>Proficiency in productivity measurement and resource-based planning (Level 4 Scheduling).</li><li>Proven leadership and supervisory experience in managing E&amp;I construction teams and contractors.</li><li>Strong organizational skills with the ability to manage multiple work fronts and shifting priorities.</li><li>High attention to detail with a focus on quality, accuracy, and safe execution.</li></ul><br><br><br><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Under the supervision of the Fire Chief, the Deputy Fire Chief responsible for Fire Station daily operations to ensure personnel are well-trained and capable to perform their duties effectively and on short notice. Select and guide firefighters to perform as expected when called upon and will continually assess their readiness and performance. This assessment will maintain daily awareness of fire inspections, fire services, inspection and testing of fire protection and alarm systems, firefighter training, and fire drills.</p><p>Manage installation FES to include maintaining operating instructions, Master Plan, Standards of Coverage, manpower, equipment and supplies. Develop and implement plans to cover for reduced operational capabilities; response, staffing, pollution prevention, safety of personnel, operational risk Manage compliance self-inspection program IAW Army Installation Command checklist ensuring requirements contained in Amy Regulation 420-1. Performance Work Statement, DoDI 6055.6 are continually maintained. Manage and participate in the development and implementation of goals, objectives, policies, and priorities for assigned programs; recommend and administer policies and procedures; oversee and participate in the development of new fire ordinances. Provide 24/7 FES to the installation. Services include on-scene incident management, aircraft rescue and firefighting, structural firefighting, response to hazardous materials, technical rescue to include auto extrication and confined space rescue and emergency medical services support. Monitor and evaluate the efficiency and effectiveness of service delivery methods and procedures; recommend, within company policy, appropriate service and staffing levels. Plan, direct, coordinate, and review the work plan for fire service staff; assign work activities, projects, and programs; review and evaluate work products, methods, and procedures. Meet with staff to identify and resolve problems. Select, train, motivate, and evaluate fire service personnel. Provide or coordinate staff training. Work with employees to correct deficiencies. Implement discipline and termination procedures. Ensure that equipment, safety clothing, apparatus, and supplies are specified, purchased, received, distributed in an effective and consistent Performs Job Duties as assigned.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><h2>Qualifications</h2><p>Minimum Qualifications:</p><p>Education/Certifications: One year related experience may be substituted for one year of education, if degree is required. An Associate s or higher degree in fire technology (Preferred)</p><p>Must be a U.S Citizen</p><p>Active or ability to obtain a Secret Clearance</p><p>Must be CAC eligible and/or able to obtain a Common Access Card (CAC)</p><p>Licenses/Certifications: Fire Officer IV, Fire Instructor II, Fire Instructor III, Fire Inspector II; HAZMAT Incident Commander, Airport Fire Fighter certifications required</p><p>Must meet training and certification requirements outlined in DOD 6055.06</p><p>Required to have IFSAC or ProBoard certification</p><p>Experience: Ten years fire protection experience</p><p>Five years supervisory experience in related position</p><p>Supervisory/ Budget Responsibilities: Review programs of the Assistant Fire Chief of Operations/Training. Respond and direct F&amp;ES personnel at emergencies. Manages large department with multiple fire stations geographically dispersed and large number of personnel. Manages significant annual budget and also vehicle replacement programming and facility improvement planning.</p><p>Skills: Must have experience directing firefighting operations to include fighting aircraft and structural fires, performing rescue services, and responding to hazardous materials incidents, medical emergencies, and confined space rescues. Knowledge of the chemistry of fire, preventive maintenance and operations of firefighting and rescue equipment, physical and chemical properties of combustible materials and building structures and their component systems. Experienced in managing fire prevention and protection plans and programs. Previous knowledge to act for the Fire Chief during his absence. Assumes complete charge of operations in absence of Fire Chief at crashes, fires, emergency situations, and at other times. Directs activities and personnel, transmitting instructions to Assistant Chiefs on the scene or other personnel as to the procedures to be followed contingent on complexity of the incident type. Must also have experience at management of self-inspection and compliance measurement programs</p><p>Working Conditions: Must be capable of working in an extreme weather conditions with temperatures exceeding 120 degrees Fahrenheit. Indoor and/or outdoor environment with very adverse and harsh conditions (i.e., hot, dry, duty, desert environment with average temperatures of 30 degrees in the winter and 130 degrees in the summer months). Includes some industrial production environment conditions as well. Work is performed in a standard office with frequent travel to various locations to attend meetings and/or perform Department activities in responding to emergency scenes, disasters, or critical incidents; the employee occasionally works near moving mechanical parts; occasionally exposed to outside weather conditions and wet and/or humid conditions; occasionally works in high, precarious places; occasionally exposed to fumes or airborne particles, toxic or caustic chemicals, extreme heat, risk of electrical shock, risk of radiation, and vibration; the noise level in the work environment is usually moderate; however, the noise level is occasionally very loud due to sirens, etc., wear protective apparel including goggles, face protector, aprons, safety shoes, and self-contained breathing apparatus; incumbents may be required to work extended hours including evenings and weekends.</p><p>Physical Requirements: Light work. Exerting up to 20 pounds of force occasionally, and/or up to 10 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects. Work may require heavy lifting, stooping, climbing, prolonged standing, prolonged sitting, and working with or in areas where a potential could exist for exposure to physical, chemical, or biological agents. Employee use of personal protective equipment (PPE) is required for some situations. PPE includes, but is not limited to, head, foot, torso, respiratory, vision, and hearing protective devices. Must comply with all Fire and Safety Regulations and post policies.</p><p></p></section>

<p>Event Management Service for a Social Dialogue Workshops Erbil, Kurdistan Region of Iraq 6 and 18th August 2026 Background and Context: More than 1.1 million Iraqis remain in protracted displacement, concentrated in the KRI and Ninawa. The Employment and Employability project has documented youth unemployment among some IDP groups at 49.6%, female refugee labour-force participation below 3% in Erbil and Duhok, and informality rates around 94% among young displaced men. The Iraqi Government's ongoing closure of IDP camps adds urgency: without a tripartite framework, people leaving camps risk moving into unprotected informal work with no recourse. The first social dialogue session will be based on the Policy Brief, Refugees, IDPs and labour market Integration in Iraq and Kurdish Region of Iraq: Advancing Inclusion through Employment that was commissioned by the GIZ supported project, Promoting Employment and Employability among Refugees, Internally Displaced Persons (IDPs) and Host Communities focusing on Women, PWDs, and Youths in Northern Iraq. That alone gives the session a concrete, ready-to-sign output. The broader discussion on labour market access barriers and active labour market policies adds systemic value. In addition, a second social dialogue will be held to discuss labour migration. Iraq recently issued new regulations on the recruitment and employment of foreign workers, creating an urgent implementation challenge that is felt differently at the federal and KRI levels. Federal and KRI frameworks diverge on work permits, recruitment procedures and labour market access a gap raised repeatedly in joint Federal MOLSA KRI discussions. At the same time, migrant workers and refugees in the KRI face documented gaps in labour rights protection, access to justice and social security coverage. This session gives the Tripartite Committee its first major substantive policy discussion: one where all three parties have an immediate, practical interest and where their combined voice can directly influence how new regulations are implemented across both levels of government. Purpose for this Service: The purpose of the service is to support and facilitate holding TWO social dialogue to be held on two separate occasions and to discus on the following topics: 6 August-Social Dialogue-One: Economic Inclusion and Decent Work for Refugees and Displaced populations 18 August -Social Dialogue-two: Labour Migration Governance: Foreign Workers, Refugees and labour mobility Objective: The ILO seeks to contract an event management company to provide logistical services for two Social Dialogue workshops to be held in the first and third weeks of August 2026. The events will be held in Erbil as follows First Social Dialogue Event date from/to: 6th August 2026 Location: Erbil Second Social Dialogue Event date from/to: 18th August 2026 Location: Erbil Number of Participants: The table below specifies the exact days of participation for each combined validation and capacity-building workshop participants Activity Number of Participants Comments Erbil Duhok Sulaymaniyah ILO Total First Social Dialogue 7 3 3 4 17 1 day workshop held 6th August 2026 Second Social Dialogue 7 3 3 4 17 1 day workshop held 18th August 2026 Agenda of the First Social Dialogue event on 6th August 2026 (10:00 AM 3:00 PM) and Second Social Dialogue event on 18th August 2026 (TBA) Logistics Requirement: A- First Social Dialogue workshop 6 August 2026 # Description uant ity Days Unit Price /USD Total Price /USD 1 Meeting room for up to (20) participants 6th August 2026 (Round table style) Data show Flip chart Drinking water Projector Type of the meeting room: Medium up to 30-50 It may be necessary to arrange a larger meeting room for group work. 1 room 1 day # Description uant ity Days Unit Price /USD Total Price /USD Hotel Rating: Four stars hotel, and approved by UNDSS Description: The room should have bright/sufficient lightning. A few windows are allowed. The walls should be solid and straight to allow sticking posters, flipcharts, sickly notes and other pieces needed for the training. The hotel management should be in agreement with posters, flip charts, sticky notes and other pieces to be sticked to the walls with sticky tape. The conference should be equipped with the following equipment that need to be returned back to the provider once training done: 1. One Laptop 2. 3 Extension Cords 3. Rental of Slide clicker with extra batteries (to be used at the training) 4. Sound System: Speakers Mixers Loudspeakers Hanging wireless 5. Wireless mic (1) Table mic (20) One data show (to be used at the training) 2 Coffee Breaks Continues (Rich 20 1 days 3 1 Lunch (Open buffet) 20 1 days 4 Accommodation is required in 4) stars hotel (in single rooms), First Social Dialogue (1st week of August) Check in: 5th August 2026 Check out: 6th August 2026 6 rooms 1 night 5 DSA amount for (6) participants for 1 night on 6th of August 6 partici pants 1 day USD 70.80 USD 424.80 6 Transportation for (13) participants 3 participants: Sulaymaniyah-Erbil-Sulaymaniyah 3 participants: Dohuk-Erbil-Dohuk 7 participants ERBIL-ERBIL 13 2 Ways for two trips USD 322 USD 322 7 Printing materials / Agenda C documents Black and white - Agenda (20 Copies) and attendance list (2 PAGES) 2 L.S 1 # Description uant ity Days Unit Price /USD Total Price /USD 8 - Table tags for participating entities designed in line with ILO Branding Guidelines 22 Copies Roll-up Standard good quality 1 EA 2m X 0.9M- aluminum base) good quality 1 EA Design to be shared by ILO 1 EA 1 Stationaries (tick what applies and specifies the quantities) Marker pens blue 21 EA Marker pens red 21 EA Marker pens green 21EA Marker pens black 21EA Branded Pens Design to be shared by ILO - 21EA Branded Notebook Design to be shared by ILO - 21EA Flipcharts 21EA 2 L.S 1 G Interpretation system with required equipment : Kurdish-Arabic-English Interpretation booth: Soundproof booth or there will be a distance between the booth and the participants to avoid noise Number of headsets Interpretation devices</p><p><strong>Desired Candidate Profile</strong></p><p><br></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Purpose of the Job <br></span><p><span><span><span><em><span><span>The HR &amp; Training Leader is responsible for facilitating employee relations and resolving human resource issues as well as supporting the Legal and Human Resources departments in the management and handling of all labor and employment law related matters. The incumbent is also responsible to come up with creative conflict resolutions that fosters collaboration and understanding between employees and the management.</span></span></em></span></span></span></p><br><br> <p><span><span><span>He/ she is also responsible for implementing the Global ER agenda at a market level as well as establishing and leading the employees’ recognition programs.</span></span></span></p><br><br> <br>Job Description <br><ul> <li>Implement new ideas on reward programs to increase employee motivation and engagement in coordination with the HR business partner</li> <li>Ensure the completion of annual performance appraisal for the station on time</li> <li>Implementing station annual training plan</li> <li>Creating and updating country succession plans</li> <li>Monitor turnover and highlight new hire trends.</li> <li>Create manpower plan and report to HR manager to track recruitment progress.</li> <li>Ensure to pass all internal and external station HR and Training audits.</li> <li>Ensure employee data is always up to date and accurate on the HR system</li> <li>Ensure the completion of Probation evaluation for the new hires in coordination with the direct Managers.</li> <li>Ensure abiding by local labor laws and culture.</li> <li>Ensure addressing all employees needs on time</li> <li>Ensure all the employees legal documents are renewed on timely manner with the coordination of PRO team wherever applicable.</li> <li>Provide legal advice on labor and employment related matters in alignment with the Global Employee Relations Manager.</li> <li>Draft, review, negotiate and update all employment agreements, contracts, offer letters, termination of employments letters/agreements in line with the local law and regulations.&nbsp;</li> <li>Conduct research and analysis of legal problems and present the same to the Legal and Human Resources department</li> <li>Ensures compliance with local laws pertaining to employment such as but not limited to discrimination, human rights, healthcare regulations, safe place, etc.</li> <li>Deals with grievances and employee concerns as they relate to HR matters</li> <li>Listens to employees concerns, issues and complaints; addresses them to encourage a supportive atmosphere and to resolve them in a way to protect general interests of all parties.</li> <li>Performs investigations regarding allegations on various employee cases and dispute resolution, advising on outcomes, conclusions and next steps.</li> <li>Acts as the employee guardian, ensuring that disciplinary procedures are being run fairly and in full respect of the employee.</li> <li>Provides advice and coaching to the HR Department and managers in best employee relations practices and strategies for effectively managing employee issues and grievances, especially in challenging situations.</li> <li>Develops and delivers employee relations training as needed.</li> <li>Acts as an unbiased third party to address and resolve workplace conflicts in a positive and balanced manner that benefits all parties and promotes healthy working relationships.</li> <li>Take initiatives related to employee relations management and make recommendations to management as necessary.</li> <li>Handles HR compliance audits, implements corrective actions, and guides the business using insights to reduce HR non-compliance cases.</li> <li>Act as the Values ambassador; the face and voice of our company values, effectively promote the company values within the workplace, peer groups, social gatherings, …etc. Effectively contributes in having employees demonstrating their commitment and loyalty to Aramex</li> <li>Support and execute organizational health and engagement initiatives</li> </ul> <br>Job Requirements - Experience and Education <br><ul> <li>Bachelor’s Degree in Law, Business Administration, HR Management or any other related field.</li> <li>3 to 5 years of experience in a similar position.&nbsp;</li> <li>Extensive knowledge in the local labor law</li> <li>Strong command of English, written and spoken</li> </ul> <p>Additional Requirements:</p><br><br> <ul> <li>Strong ethics, integrity, and confidentiality, with the ability to stand up for what is right.</li> <li>Strong communication, with a focus on probing skills, active listening, ability to empathize and verbalize a clear message.</li> <li>Ability to present information and negotiate with employees and managers from different levels.</li> <li>Analytical thinker, solution oriented and unbiased decision maker.</li> <li>Ability to comprehend, interpret, and apply the appropriate sections of applicable laws, guidelines, regulations, ordinances, and policies.</li> <li>Ability to remain tactful, calm, and persuasive in controversial and/or confrontational situations.</li> <li>Structured logical thinker.</li> <li>Ability to collaborate across functions, and work in an inclusive manner.<br> &nbsp;</li> </ul> <br>Leadership Behaviors <br>Building Outstanding Teams<br>Setting a clear direction<br>Simplification<br>Collaborate &amp; break silos<br>Execution &amp; Accountability<br>Growth mindset<br>Innovation<br>Inclusion<br>External focus<br>Skills <br>Team Collaboration<br>Communication Skills<br>Attention To Details<br>Problem Solving<br>Time Management<br>Active Listening<br>Administrative Skills<br> </div>